branches: 1.1.2;
Install agr ioctl header and stop putting our hand under the sys skirt
in ifconfig.

branches: 1.1.2; 1.1.4; 1.1.6;
add agr(4), a pseudo network device driver for link aggregation.

Move net/agr/ieee8023_slowprotocols.h to net/ether_slowprotocols.h

Definitions related to slowprotocols are duplicated between
agr/ieee8023ad_slowprotocols.h and lagg/if_lagg_lacp.h
Therefore, the contents are moved to added file.

Note: currently, there are just LACP and Marker protocol,
however slowprotocols is independent of them.

Multiple inclusion protection, as suggested by christos@ on tech-kern@
few days ago.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Replace the Mach-derived boolean_t type with the C99 bool type. A
future commit will replace use of TRUE and FALSE with true and false.

branches: 1.2.26;
merge ktrace-lwp.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Replace the Mach-derived boolean_t type with the C99 bool type. A
future commit will replace use of TRUE and FALSE with true and false.

branches: 1.2.26;
Multiple inclusion protection, as suggested by christos@ on tech-kern@
few days ago.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Multiple inclusion protection, as suggested by christos@ on tech-kern@
few days ago.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Multiple inclusion protection, as suggested by christos@ on tech-kern@
few days ago.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Move net/agr/ieee8023_slowprotocols.h to net/ether_slowprotocols.h

Definitions related to slowprotocols are duplicated between
agr/ieee8023ad_slowprotocols.h and lagg/if_lagg_lacp.h
Therefore, the contents are moved to added file.

Note: currently, there are just LACP and Marker protocol,
however slowprotocols is independent of them.

Replace ifnet::if_agriprivate with ifnet::if_lagg

agr(4) and lagg(4) can not be used on the same interface so that
if_agrprivate and if_lagg are not used at the same time.
For resolve this wasteful, if_lagg is used in not only lagg(4)
but also agr(4).

After this modification, if_lagg has 3 states:
1. if_lagg == NULL
- Both agr(4) and lagg(4) are not running on the interface
2. if_lagg != NULL && ifp->if_type != IFT_IEEE8023ADLAG
- agr(4) is running on the I/F
3. if_lagg != NULL && ifp->if_type == IFT_IEEE8023ADLAG
- lagg(4) is running on the I/F

Adopt <net/if_stats.h>.

branches: 1.10.54; 1.10.60;
Fix memset usage.

Add vlan support and hardware offload capabilities to agr.
These changes allow vlans to be layered above agr, with the attach
and detach propogated to the member ports in the aggregation.
Note the agr interface must be up before the vlan is attached.

Adds SIOCINITIFADDR support to the wm driver for setting the AF_LINK
address, necessary for agr to be able to set the mac addresses of each
port to the agr address (i.e. so it can receive all intended traffic
at the hardware level).

Adds support for disabling the LACP protocol by setting LINK1 on the agr
interface (e.g. ifconfig agr0 link1).

In consultation with tls@.

branches: 1.8.26; 1.8.36; 1.8.40; 1.8.44;
Constify: LLADDR -> CLLADDR. I'm aiming here to make it easier to
identify sockaddr_dl abuse that remains in the kernel, especially
the potential for overwriting memory past the end of a sockaddr_dl
with, e.g., memcpy(LLADDR(), ...).

Use sockaddr_dl_setaddr() in a few places.

branches: 1.7.2; 1.7.6;
Merge some of the less invasive changes from the vmlocking branch:

- kthread, callout, devsw API changes
- select()/poll() improvements
- miscellaneous MT safety improvements

use mutex.

branches: 1.5.4; 1.5.6;
TRUE -> true, FALSE -> false

Replace the Mach-derived boolean_t type with the C99 bool type. A
future commit will replace use of TRUE and FALSE with true and false.

branches: 1.3.26;
merge ktrace-lwp.

include callout.h explicitly.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

replace bitmask_snprintf(9) with snprintb(3)

branches: 1.2.70; 1.2.74; 1.2.84;
Multiple inclusion protection, as suggested by christos@ on tech-kern@
few days ago.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Move net/agr/ieee8023_slowprotocols.h to net/ether_slowprotocols.h

Definitions related to slowprotocols are duplicated between
agr/ieee8023ad_slowprotocols.h and lagg/if_lagg_lacp.h
Therefore, the contents are moved to added file.

Note: currently, there are just LACP and Marker protocol,
however slowprotocols is independent of them.

Retire varargs.h support. Move machine/stdarg.h logic into MI
sys/stdarg.h and expect compiler to provide proper builtins, defaulting
to the GCC interface. lint still has a special fallback.
Reduce abuse of _BSD_VA_LIST_ by defining __va_list by default and
derive va_list as required by standards.

replace bitmask_snprintf(9) with snprintb(3)

branches: 1.4.70; 1.4.74; 1.4.84;
merge ktrace-lwp.

include callout.h explicitly.

branches: 1.2.2;
constify.

branches: 1.1.2; 1.1.4; 1.1.6;
add agr(4), a pseudo network device driver for link aggregation.

Multiple inclusion protection, as suggested by christos@ on tech-kern@
few days ago.

branches: 1.2.2;
constify.

branches: 1.1.2; 1.1.4; 1.1.6;
add agr(4), a pseudo network device driver for link aggregation.

Replace the Mach-derived boolean_t type with the C99 bool type. A
future commit will replace use of TRUE and FALSE with true and false.

branches: 1.4.4;
make agr headers include lock.h and queue.h by themselves.

branches: 1.3.20; 1.3.22;
Multiple inclusion protection, as suggested by christos@ on tech-kern@
few days ago.

branches: 1.2.2;
make lacp_timer_funcs static.

branches: 1.1.2; 1.1.4; 1.1.6;
add agr(4), a pseudo network device driver for link aggregation.

Move net/agr/ieee8023_slowprotocols.h to net/ether_slowprotocols.h

Definitions related to slowprotocols are duplicated between
agr/ieee8023ad_slowprotocols.h and lagg/if_lagg_lacp.h
Therefore, the contents are moved to added file.

Note: currently, there are just LACP and Marker protocol,
however slowprotocols is independent of them.

TRUE -> true, FALSE -> false

Replace the Mach-derived boolean_t type with the C99 bool type. A
future commit will replace use of TRUE and FALSE with true and false.

branches: 1.3.26;
merge ktrace-lwp.

include callout.h explicitly.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Multiple inclusion protection, as suggested by christos@ on tech-kern@
few days ago.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Move net/agr/ieee8023_slowprotocols.h to net/ether_slowprotocols.h

Definitions related to slowprotocols are duplicated between
agr/ieee8023ad_slowprotocols.h and lagg/if_lagg_lacp.h
Therefore, the contents are moved to added file.

Note: currently, there are just LACP and Marker protocol,
however slowprotocols is independent of them.

Replace the Mach-derived boolean_t type with the C99 bool type. A
future commit will replace use of TRUE and FALSE with true and false.

branches: 1.3.26;
merge ktrace-lwp.

include callout.h explicitly.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Move net/agr/ieee8023_slowprotocols.h to net/ether_slowprotocols.h

Definitions related to slowprotocols are duplicated between
agr/ieee8023ad_slowprotocols.h and lagg/if_lagg_lacp.h
Therefore, the contents are moved to added file.

Note: currently, there are just LACP and Marker protocol,
however slowprotocols is independent of them.

merge ktrace-lwp.

include callout.h explicitly.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Move net/agr/ieee8023_slowprotocols.h to net/ether_slowprotocols.h

Definitions related to slowprotocols are duplicated between
agr/ieee8023ad_slowprotocols.h and lagg/if_lagg_lacp.h
Therefore, the contents are moved to added file.

Note: currently, there are just LACP and Marker protocol,
however slowprotocols is independent of them.

Replace the Mach-derived boolean_t type with the C99 bool type. A
future commit will replace use of TRUE and FALSE with true and false.

branches: 1.3.26;
merge ktrace-lwp.

include callout.h explicitly.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Move net/agr/ieee8023_slowprotocols.h to net/ether_slowprotocols.h

Definitions related to slowprotocols are duplicated between
agr/ieee8023ad_slowprotocols.h and lagg/if_lagg_lacp.h
Therefore, the contents are moved to added file.

Note: currently, there are just LACP and Marker protocol,
however slowprotocols is independent of them.

hardclock_ticks -> getticks()

merge ktrace-lwp.

include callout.h explicitly.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Move net/agr/ieee8023_slowprotocols.h to net/ether_slowprotocols.h

Definitions related to slowprotocols are duplicated between
agr/ieee8023ad_slowprotocols.h and lagg/if_lagg_lacp.h
Therefore, the contents are moved to added file.

Note: currently, there are just LACP and Marker protocol,
however slowprotocols is independent of them.

const static -> static const

branches: 1.4.20; 1.4.22;
merge ktrace-lwp.

include callout.h explicitly.

branches: 1.2.2;
make lacp_timer_funcs static.

branches: 1.1.2; 1.1.4; 1.1.6;
add agr(4), a pseudo network device driver for link aggregation.

Move net/agr/ieee8023_slowprotocols.h to net/ether_slowprotocols.h

Definitions related to slowprotocols are duplicated between
agr/ieee8023ad_slowprotocols.h and lagg/if_lagg_lacp.h
Therefore, the contents are moved to added file.

Note: currently, there are just LACP and Marker protocol,
however slowprotocols is independent of them.

Replace ifnet::if_agriprivate with ifnet::if_lagg

agr(4) and lagg(4) can not be used on the same interface so that
if_agrprivate and if_lagg are not used at the same time.
For resolve this wasteful, if_lagg is used in not only lagg(4)
but also agr(4).

After this modification, if_lagg has 3 states:
1. if_lagg == NULL
- Both agr(4) and lagg(4) are not running on the interface
2. if_lagg != NULL && ifp->if_type != IFT_IEEE8023ADLAG
- agr(4) is running on the I/F
3. if_lagg != NULL && ifp->if_type == IFT_IEEE8023ADLAG
- lagg(4) is running on the I/F

TRUE -> true, FALSE -> false

branches: 1.3.26;
merge ktrace-lwp.

include callout.h explicitly.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Multiple inclusion protection, as suggested by christos@ on tech-kern@
few days ago.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

if_stats(9): Add ifp argument to if_stat..._ref.

This will enable us to pass the ifp through to a dtrace probe inside.

No functional change intended in this change, but this is an API
change visible to modules so it shouldn't be pulled up.

PR kern/58377

Eliminate use of IFF_OACTIVE.

Handling frames that vlan id is 0 as non-VLAN frames
even if a vlan tag is stripped by harware offloading

sys: Use if_init wrapper function.

Exception: Not in kern_pmf.c, for the kind of silly reason that it
avoids having kern_pmf.c refer to symbols defined only in net; this
avoids a pain in the rump.

Replace ifnet::if_agriprivate with ifnet::if_lagg

agr(4) and lagg(4) can not be used on the same interface so that
if_agrprivate and if_lagg are not used at the same time.
For resolve this wasteful, if_lagg is used in not only lagg(4)
but also agr(4).

After this modification, if_lagg has 3 states:
1. if_lagg == NULL
- Both agr(4) and lagg(4) are not running on the interface
2. if_lagg != NULL && ifp->if_type != IFT_IEEE8023ADLAG
- agr(4) is running on the I/F
3. if_lagg != NULL && ifp->if_type == IFT_IEEE8023ADLAG
- lagg(4) is running on the I/F

fix various typos in comments and log messages.

Adopt <net/if_stats.h>.

branches: 1.50.2;
xc_barrier - convenience function to xc_broadcast() a nop.

Make the intent more clear and also avoid a bunch of (xcfunc_t)nullop
casts that gcc 8 -Wcast-function-type is not happy about.

Some more empty-string --> NULL conversions for module dependencies

Replace compile-time checking for vlan code with a module hook.

Should resolve the errors reported on irc when booting a kernel which
has agr without vlan:


[ 1.0000000] WARNING: module error: built-in module if_agr can't find builtin dependency `if_vlan'
[ 1.0000000] WARNING: module error: built-in module if_agr prerequisite if_vlan failed, error 2

branches: 1.47.2;
Implement the BPF direction filter (BIOC[GS]DIRECTION). It provides backward
compatibility with BIOC[GS]SEESENT ioctl. The userland interface is the same
as FreeBSD.

This change also fixes a bug that the direction is misunderstand on some
environment by passing the direction to bpf_mtap*() instead of checking
m->m_pkthdr.rcvif.

branches: 1.46.2;
Add locking.

Fix agr(4) module build. Reviewed by pgoyette@n.o, thanks.

Mmh, fix a weird mistake: the guy who added #if NVLAN > 0 forgot to
actually include vlan.h, so the branches are never compiled.

They don't compile, by the way, so fix that too, by reproducing the vlan
input path of ether_input().

Ensure to not turn on IFF_RUNNING of an interface until its initialization completes

And ensure to turn off it before destruction as per IFF_RUNNING's description
"resource allocated". (The description is a bit doubtful though, I believe the
change is still proper.)

Simplify; share agr_vlan_add and agr_vlan_del (NFCI)

branches: 1.41.6;
Switch agr(4) to use a workqueue. This is necessary because during
a callout, it allocates memory with M_WAITOK, which triggers a
DEBUG assert.

XXX we should drain the workqueue.

ok riastradh

branches: 1.40.2;
Move bpf_mtap and if_ipackets++ on Rx of each driver to percpuq if_input

The benefits of the change are:
- We can reduce codes
- We can provide the same behavior between drivers
- Where/When if_ipackets is counted up
- Note that some drivers still update packet statistics in their own
way (periodical update)
- Moved bpf_mtap run in softint
- This makes it easy to MP-ify bpf

Proposed on tech-kern and tech-net

modularize some more drivers and merge the module glue

Apply pserialize to some iterations of IP address lists

branches: 1.37.2;
Switch the address list of intefaces to pslist(9)

As usual, we leave the old list to avoid breaking kvm(3) users.

apply if_output_lock() to L3 callers which call ifp->if_output() of L2(or L3 tunneling).

Introduce m_set_rcvif and m_reset_rcvif

The API is used to set (or reset) a received interface of a mbuf.
They are counterpart of m_get_rcvif, which will come in another
commit, hide internal of rcvif operation, and reduce the diff of
the upcoming change.

No functional change.

Introduce softint-based if_input

This change intends to run the whole network stack in softint context
(or normal LWP), not hardware interrupt context. Note that the work is
still incomplete by this change; to that end, we also have to softint-ify
if_link_state_change (and bpf) which can still run in hardware interrupt.

This change softint-ifies at ifp->if_input that is called from
each device driver (and ieee80211_input) to ensure Layer 2 runs
in softint (e.g., ether_input and bridge_input). To this end,
we provide a framework (called percpuq) that utlizes softint(9)
and percpu ifqueues. With this patch, rxintr of most drivers just
queues received packets and schedules a softint, and the softint
dequeues packets and does rest packet processing.

To minimize changes to each driver, percpuq is allocated in struct
ifnet for now and that is initialized by default (in if_attach).
We probably have to move percpuq to softc of each driver, but it's
future work. At this point, only wm(4) has percpuq in its softc
as a reference implementation.

Additional information including performance numbers can be found
in the thread at tech-kern@ and tech-net@:
http://mail-index.netbsd.org/tech-kern/2016/01/14/msg019997.html

Acknowledgment: riastradh@ greatly helped this work.
Thank you very much!

sprinkle _KERNEL_OPT

include "ioconf.h" to get the 'void <driver>attach(int count);' prototype.

branches: 1.31.6;
Remove unused variable

branches: 1.30.2; 1.30.12; 1.30.16;
Use if_flags_set() and if_addr_init() instead of ifp->if_ioctl().

Keep condvar wmesg within 8 char limit

Change sc_wrports from an int to a bool and "test truth" instead of
comparing with 0.

Add 'volatile' to several other state variables that need it.

Push the bpf_ops usage back into bpf.h. Push the common ifp->if_bpf
check into the inline functions as well the fourth argument for
bpf_attach.

branches: 1.26.2;
Take another stab at fixing the LOCKDEBUG panic reported in PR
kern/39940 and by Martti Kuparinen on current-users@: replace the
ioctl lock with finer-grained locking. Lock the ports list and
wait to if_clone_destroy() until all threads are out of the softc.

Thanks to Martti Kuparinen for testing these changes.

branches: 1.25.2;
Redefine bpf linkage through an always present op vector, i.e.
#if NBPFILTER is no longer required in the client. This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached. However, callers of bpf can
now be modularized.

Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff. ... and I'm not going to ponder the depths of unload
here.

Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.

comment style. no functional change.

Add vlan support and hardware offload capabilities to agr.
These changes allow vlans to be layered above agr, with the attach
and detach propogated to the member ports in the aggregation.
Note the agr interface must be up before the vlan is attached.

Adds SIOCINITIFADDR support to the wm driver for setting the AF_LINK
address, necessary for agr to be able to set the mac addresses of each
port to the agr address (i.e. so it can receive all intended traffic
at the hardware level).

Adds support for disabling the LACP protocol by setting LINK1 on the agr
interface (e.g. ifconfig agr0 link1).

In consultation with tls@.

branches: 1.22.4;
*** Summary ***

When a link-layer address changes (e.g., ifconfig ex0 link
02:de:ad:be:ef:02 active), send a gratuitous ARP and/or a Neighbor
Advertisement to update the network-/link-layer address bindings
on our LAN peers.

Refuse a change of ethernet address to the address 00:00:00:00:00:00
or to any multicast/broadcast address. (Thanks matt@.)

Reorder ifnet ioctl operations so that driver ioctls may inherit
the functions of their "class"---ether_ioctl(), fddi_ioctl(), et
cetera---and the class ioctls may inherit from the generic ioctl,
ifioctl_common(), but both driver- and class-ioctls may override
the generic behavior. Make network drivers share more code.

Distinguish a "factory" link-layer address from others for the
purposes of both protecting that address from deletion and computing
EUI64.

Return consistent, appropriate error codes from network drivers.

Improve readability. KNF.

*** Details ***

In if_attach(), always initialize the interface ioctl routine,
ifnet->if_ioctl, if the driver has not already initialized it.
Delete if_ioctl == NULL tests everywhere else, because it cannot
happen.

In the ioctl routines of network interfaces, inherit common ioctl
behaviors by calling either ifioctl_common() or whichever ioctl
routine is appropriate for the class of interface---e.g., ether_ioctl()
for ethernets.

Stop (ab)using SIOCSIFADDR and start to use SIOCINITIFADDR. In
the user->kernel interface, SIOCSIFADDR's argument was an ifreq,
but on the protocol->ifnet interface, SIOCSIFADDR's argument was
an ifaddr. That was confusing, and it would work against me as I
make it possible for a network interface to overload most ioctls.
On the protocol->ifnet interface, replace SIOCSIFADDR with
SIOCINITIFADDR. In ifioctl(), return EPERM if userland tries to
invoke SIOCINITIFADDR.

In ifioctl(), give the interface the first shot at handling most
interface ioctls, and give the protocol the second shot, instead
of the other way around. Finally, let compatibility code (COMPAT_OSOCK)
take a shot.

Pull device initialization out of switch statements under
SIOCINITIFADDR. For example, pull ..._init() out of any switch
statement that looks like this:

switch (...->sa_family) {
case ...:
..._init();
...
break;
...
default:
..._init();
...
break;
}

Rewrite many if-else clauses that handle all permutations of IFF_UP
and IFF_RUNNING to use a switch statement,

switch (x & (IFF_UP|IFF_RUNNING)) {
case 0:
...
break;
case IFF_RUNNING:
...
break;
case IFF_UP:
...
break;
case IFF_UP|IFF_RUNNING:
...
break;
}

unifdef lots of code containing #ifdef FreeBSD, #ifdef NetBSD, and
#ifdef SIOCSIFMTU, especially in fwip(4) and in ndis(4).

In ipw(4), remove an if_set_sadl() call that is out of place.

In nfe(4), reuse the jumbo MTU logic in ether_ioctl().

Let ethernets register a callback for setting h/w state such as
promiscuous mode and the multicast filter in accord with a change
in the if_flags: ether_set_ifflags_cb() registers a callback that
returns ENETRESET if the caller should reset the ethernet by calling
if_init(), 0 on success, != 0 on failure. Pull common code from
ex(4), gem(4), nfe(4), sip(4), tlp(4), vge(4) into ether_ioctl(),
and register if_flags callbacks for those drivers.

Return ENOTTY instead of EINVAL for inappropriate ioctls. In
zyd(4), use ENXIO instead of ENOTTY to indicate that the device is
not any longer attached.

Add to if_set_sadl() a boolean 'factory' argument that indicates
whether a link-layer address was assigned by the factory or some
other source. In a comment, recommend using the factory address
for generating an EUI64, and update in6_get_hw_ifid() to prefer a
factory address to any other link-layer address.

Add a routing message, RTM_LLINFO_UPD, that tells protocols to
update the binding of network-layer addresses to link-layer addresses.
Implement this message in IPv4 and IPv6 by sending a gratuitous
ARP or a neighbor advertisement, respectively. Generate RTM_LLINFO_UPD
messages on a change of an interface's link-layer address.

In ether_ioctl(), do not let SIOCALIFADDR set a link-layer address
that is broadcast/multicast or equal to 00:00:00:00:00:00.

Make ether_ioctl() call ifioctl_common() to handle ioctls that it
does not understand.

In gif(4), initialize if_softc and use it, instead of assuming that
the gif_softc and ifp overlap.

Let ifioctl_common() handle SIOCGIFADDR.

Sprinkle rtcache_invariants(), which checks on DIAGNOSTIC kernels
that certain invariants on a struct route are satisfied.

In agr(4), rewrite agr_ioctl_filter() to be a bit more explicit
about the ioctls that we do not allow on an agr(4) member interface.

bzero -> memset. Delete unnecessary casts to void *. Use
sockaddr_in_init() and sockaddr_in6_init(). Compare pointers with
NULL instead of "testing truth". Replace some instances of (type
*)0 with NULL. Change some K&R prototypes to ANSI C, and join
lines.

branches: 1.21.4; 1.21.6; 1.21.8; 1.21.12;
agr_ioctl_filter: comment the intention.

branches: 1.20.6; 1.20.8; 1.20.10; 1.20.12;
Poison struct route->ro_rt uses in the kernel by changing the name
to _ro_rt. Use rtcache_getrt() to access a route cache's struct
rtentry *.

Introduce struct ifnet->if_dl that always points at the interface
identifier/link-layer address. Make code that treated the first
ifaddr on struct ifnet->if_addrlist as the interface address use
if_dl, instead.

Remove stale debugging code from net/route.c. Move the rtflush()
code into rtcache_clear() and delete rtflush(). Delete rtalloc(),
because nothing uses it any more.

Make ND6_HINT an inline, lowercase subroutine, nd6_hint.

I've done my best to convert IP Filter, the ISO stack, and the
AppleTalk stack to rtcache_getrt(). They compile, but I have not
tested them. I have given the changes to PF, GRE, IPv4 and IPv6
stacks a lot of exercise.

branches: 1.19.4;
Unbork

Replace usage of p_cred in kauth(9) call with kauth_cred_get().

okay yamt@.

Use IFADDR_FIRST(), IFADDR_NEXT().

branches: 1.16.6; 1.16.8;
We cannot sleep in a software interrupt, so do not sockaddr_dl_alloc(...,
M_WAITOK). Instead, sockaddr_dl_init() a sockaddr_dl on the stack.

Use malloc(9) for sockaddrs instead of pool(9), and remove dom_sa_pool
and dom_sa_len members from struct domain. Pools of fixed-size
objects are too rigid for sockaddr_dls, whose size can vary over
a wide range.

Return sockaddr_dl to its "historical" size. Now that I'm using
malloc(9) instead of pool(9) to allocate sockaddr_dl, I can create
a sockaddr_dl of any size in the kernel, so expanding sockaddr_dl
is useless.

Avoid using sizeof(struct sockaddr_dl) in the kernel.

Introduce sockaddr_dl_alloc() for allocating & initializing an
arbitrary sockaddr_dl on the heap.

Add an argument, the sockaddr length, to sockaddr_alloc(),
sockaddr_copy(), and sockaddr_dl_setaddr().

Constify: LLADDR() -> CLLADDR().

Where the kernel overwrites LLADDR(), use sockaddr_dl_setaddr(),
instead. Used properly, sockaddr_dl_setaddr() will not overrun
the end of the sockaddr.

branches: 1.14.2;
Constify: LLADDR -> CLLADDR. I'm aiming here to make it easier to
identify sockaddr_dl abuse that remains in the kernel, especially
the potential for overwriting memory past the end of a sockaddr_dl
with, e.g., memcpy(LLADDR(), ...).

Use sockaddr_dl_setaddr() in a few places.

branches: 1.13.2;
Use sockaddr_dl_measure() and sockaddr_dl_init(). Erase unnecessary
cast.

branches: 1.12.2; 1.12.6;
use mutex.

branches: 1.11.2; 1.11.4; 1.11.6;
Kill caddr_t; there will be some MI fallout, but it will be fixed shortly.

TRUE -> true, FALSE -> false

Replace the Mach-derived boolean_t type with the C99 bool type. A
future commit will replace use of TRUE and FALSE with true and false.

branches: 1.8.4;
agr_setconfig: ensure ifname is NUL terminated. PR/34894 from Michael Pounov.

Kill KAUTH_GENERIC_ISSUSER use.

branches: 1.6.4; 1.6.6;
agr_ioctl: wrap a long line after kauth merge.

branches: 1.5.4;
include sys/kauth.h for kauth_authorize_generic.

integrate kauth.

branches: 1.3.4; 1.3.6; 1.3.8; 1.3.10; 1.3.12;
merge ktrace-lwp.

include callout.h explicitly.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Move net/agr/ieee8023_slowprotocols.h to net/ether_slowprotocols.h

Definitions related to slowprotocols are duplicated between
agr/ieee8023ad_slowprotocols.h and lagg/if_lagg_lacp.h
Therefore, the contents are moved to added file.

Note: currently, there are just LACP and Marker protocol,
however slowprotocols is independent of them.

in many device attach paths, allocate memory with M_WAITOK instead of M_NOWAIT
and remove code to handle failures that can no longer happen.

branches: 1.10.4;
Simplify; share agr_vlan_add and agr_vlan_del (NFCI)

branches: 1.9.46;
Use if_flags_set() and if_addr_init() instead of ifp->if_ioctl().

comment style. no functional change.

Add vlan support and hardware offload capabilities to agr.
These changes allow vlans to be layered above agr, with the attach
and detach propogated to the member ports in the aggregation.
Note the agr interface must be up before the vlan is attached.

Adds SIOCINITIFADDR support to the wm driver for setting the AF_LINK
address, necessary for agr to be able to set the mac addresses of each
port to the agr address (i.e. so it can receive all intended traffic
at the hardware level).

Adds support for disabling the LACP protocol by setting LINK1 on the agr
interface (e.g. ifconfig agr0 link1).

In consultation with tls@.

branches: 1.6.26; 1.6.36; 1.6.40; 1.6.44;
Constify: LLADDR -> CLLADDR. I'm aiming here to make it easier to
identify sockaddr_dl abuse that remains in the kernel, especially
the potential for overwriting memory past the end of a sockaddr_dl
with, e.g., memcpy(LLADDR(), ...).

Use sockaddr_dl_setaddr() in a few places.

branches: 1.5.2; 1.5.10; 1.5.14;
Kill caddr_t; there will be some MI fallout, but it will be fixed shortly.

Replace the Mach-derived boolean_t type with the C99 bool type. A
future commit will replace use of TRUE and FALSE with true and false.

branches: 1.3.26;
merge ktrace-lwp.

include callout.h explicitly.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

VLAN ID uses pkthdr instead of mtag now. Contributed by s-yamaguchi@IIJ.

I just commit by proxy. Reviewed by joerg@n.o and christos@n.o, thanks.
See http://mail-index.netbsd.org/tech-net/2017/09/26/msg006459.html

XXX need pullup to -8 branch

branches: 1.3.78; 1.3.114;
agrether_hashmbuf: feed ipv6 flowlabel to hash calculation.

branches: 1.2.26; 1.2.30; 1.2.32;
merge ktrace-lwp.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Multiple inclusion protection, as suggested by christos@ on tech-kern@
few days ago.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

ifconfig: fix agr status

Previously, when the interface was collecting, its status was reported
as '<COLLECTING,DISTRIBUTING>', even when it was not distributing.

sbin/ifconfig/agr.c(170): warning: 'b\0DISTRIBUTING\0' overlaps earlier
'b\0COLLECTING\0' on bit 0 [376]

Multiple inclusion protection, as suggested by christos@ on tech-kern@
few days ago.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

KNF. No functional change.

branches: 1.5.14;
Switch agr(4) to use a workqueue. This is necessary because during
a callout, it allocates memory with M_WAITOK, which triggers a
DEBUG assert.

XXX we should drain the workqueue.

ok riastradh

branches: 1.4.48; 1.4.68; 1.4.72; 1.4.76;
agrport_monitor: map IFM_NONE to IFM_NONE|IFM_ETHER and add a comment.

branches: 1.3.70;
merge ktrace-lwp.

include callout.h explicitly.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

ansify function definitions

branches: 1.3.74; 1.3.84; 1.3.90;
fix a typo in a comment.

branches: 1.2.6;
include callout.h explicitly.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

in many device attach paths, allocate memory with M_WAITOK instead of M_NOWAIT
and remove code to handle failures that can no longer happen.

branches: 1.12.4;
Add locking.

Simplify; share agr_vlan_add and agr_vlan_del (NFCI)

branches: 1.10.10;
sprinkle _KERNEL_OPT

branches: 1.9.22; 1.9.40;
Redefine bpf linkage through an always present op vector, i.e.
#if NBPFILTER is no longer required in the client. This change
doesn't yet add support for loading bpf as a module, since drivers
can register before bpf is attached. However, callers of bpf can
now be modularized.

Dynamically loadable bpf could probably be done fairly easily with
coordination from the stub driver and the real driver by registering
attachments in the stub before the real driver is loaded and doing
a handoff. ... and I'm not going to ponder the depths of unload
here.

Tested with i386/MONOLITHIC, modified MONOLITHIC without bpf and rump.

branches: 1.8.24;
Use ifreq_getaddr(). Pass a sockaddr instead of ifreq where sockaddr
will suffice.

branches: 1.7.2; 1.7.4; 1.7.6;
don't forget to maintain ama_addrs. reported by Coverity via Arnaud Lacombe.

agrport_mc_del_callback: s/SIOCADDMULTI/SIOCDELMULTI/

branches: 1.5.2; 1.5.10;
Kill caddr_t; there will be some MI fallout, but it will be fixed shortly.

Replace the Mach-derived boolean_t type with the C99 bool type. A
future commit will replace use of TRUE and FALSE with true and false.

branches: 1.3.26;
merge ktrace-lwp.

include callout.h explicitly.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Simplify; share agr_vlan_add and agr_vlan_del (NFCI)

branches: 1.4.124;
Replace the Mach-derived boolean_t type with the C99 bool type. A
future commit will replace use of TRUE and FALSE with true and false.

branches: 1.3.4;
make agr headers include lock.h and queue.h by themselves.

branches: 1.2.20; 1.2.22;
Multiple inclusion protection, as suggested by christos@ on tech-kern@
few days ago.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Switch agr(4) to use a workqueue. This is necessary because during
a callout, it allocates memory with M_WAITOK, which triggers a
DEBUG assert.

XXX we should drain the workqueue.

ok riastradh

branches: 1.6.20; 1.6.38; 1.6.42; 1.6.46;
Take another stab at fixing the LOCKDEBUG panic reported in PR
kern/39940 and by Martti Kuparinen on current-users@: replace the
ioctl lock with finer-grained locking. Lock the ports list and
wait to if_clone_destroy() until all threads are out of the softc.

Thanks to Martti Kuparinen for testing these changes.

branches: 1.5.32; 1.5.54;
Merge some of the less invasive changes from the vmlocking branch:

- kthread, callout, devsw API changes
- select()/poll() improvements
- miscellaneous MT safety improvements

use mutex.

branches: 1.3.30; 1.3.32;
merge ktrace-lwp.

include callout.h explicitly.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

Multiple inclusion protection, as suggested by christos@ on tech-kern@
few days ago.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.

fix various typos in documentation, comments and sysctl device description.
mainly aion -> ation and inlude -> include.

Switch agr(4) to use a workqueue. This is necessary because during
a callout, it allocates memory with M_WAITOK, which triggers a
DEBUG assert.

XXX we should drain the workqueue.

ok riastradh

branches: 1.10.18; 1.10.36; 1.10.40; 1.10.44;
Change sc_wrports from an int to a bool and "test truth" instead of
comparing with 0.

Add 'volatile' to several other state variables that need it.

branches: 1.9.2;
Take another stab at fixing the LOCKDEBUG panic reported in PR
kern/39940 and by Martti Kuparinen on current-users@: replace the
ioctl lock with finer-grained locking. Lock the ports list and
wait to if_clone_destroy() until all threads are out of the softc.

Thanks to Martti Kuparinen for testing these changes.

branches: 1.8.2;
Add vlan support and hardware offload capabilities to agr.
These changes allow vlans to be layered above agr, with the attach
and detach propogated to the member ports in the aggregation.
Note the agr interface must be up before the vlan is attached.

Adds SIOCINITIFADDR support to the wm driver for setting the AF_LINK
address, necessary for agr to be able to set the mac addresses of each
port to the agr address (i.e. so it can receive all intended traffic
at the hardware level).

Adds support for disabling the LACP protocol by setting LINK1 on the agr
interface (e.g. ifconfig agr0 link1).

In consultation with tls@.

branches: 1.7.32; 1.7.44; 1.7.48; 1.7.52;
use mutex.

branches: 1.6.2; 1.6.4;
Kill caddr_t; there will be some MI fallout, but it will be fixed shortly.

Replace the Mach-derived boolean_t type with the C99 bool type. A
future commit will replace use of TRUE and FALSE with true and false.

branches: 1.4.4;
make agr headers include lock.h and queue.h by themselves.

branches: 1.3.4; 1.3.6;
make a multiple inclusion protection macro match with the filename.

branches: 1.2.4; 1.2.8; 1.2.16;
Multiple inclusion protection, as suggested by christos@ on tech-kern@
few days ago.

branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8;
add agr(4), a pseudo network device driver for link aggregation.