History log of /src/sys/net/link_proto.c |
Revision | | Date | Author | Comments |
1.41 |
| 05-Jun-2025 |
ozaki-r | Apply if_first_addr() and if_first_addr_psref()
|
1.40 |
| 31-Dec-2021 |
riastradh | sys: Use if_init wrapper function.
Exception: Not in kern_pmf.c, for the kind of silly reason that it avoids having kern_pmf.c refer to symbols defined only in net; this avoids a pain in the rump.
|
1.39 |
| 25-Sep-2019 |
ozaki-r | Make panic messages more informative
|
1.38 |
| 29-Apr-2019 |
roy | rtsock: Route address message simplification
Rename rt_newaddrmsg to rt_addrmsg_rt. Add rt_addrmsg which drops the error and route arguments which are only needed by one caller.
|
1.37 |
| 28-Jan-2019 |
martin | Fix memory leaks pointed out by Ilja Van Sprundel: all sendoob() functions are expted to free both passed mbuf chains.
|
1.36 |
| 06-Apr-2017 |
ozaki-r | branches: 1.36.6; 1.36.14; Revert "Make sure to hold if_ioctl_lock when calling ifp->if_ioctl"
As per pgoyette@ and riastradh@ requests; we shouldn't decide to hold a lock based on if the lock is held or not.
|
1.35 |
| 05-Apr-2017 |
ozaki-r | Make sure to hold if_ioctl_lock when calling ifp->if_ioctl
Unfortunately callers of ifp->if_ioctl (if_addr_init, if_flags_set and if_mcast_op) may or may not hold if_ioctl_lock, so we have to hold the lock only if it's not held.
|
1.34 |
| 11-Jan-2017 |
ozaki-r | branches: 1.34.2; Don't call ifa_remove with holding psref
|
1.33 |
| 26-Dec-2016 |
ozaki-r | Use psz/psref to hold ifa
|
1.32 |
| 19-Nov-2016 |
njoly | Make fstat(2) work on AF_LINK socket descriptors.
|
1.31 |
| 07-Jul-2016 |
ozaki-r | branches: 1.31.2; Switch the address list of intefaces to pslist(9)
As usual, we leave the old list to avoid breaking kvm(3) users.
|
1.30 |
| 21-Jan-2016 |
riastradh | Revert previous: ran cvs commit when I meant cvs diff. Sorry!
Hit up-arrow one too few times.
|
1.29 |
| 21-Jan-2016 |
riastradh | Give proper prototype to ip_output.
|
1.28 |
| 02-May-2015 |
rtr | make connect syscall use sockaddr_big and modify pr_{send,connect} nam parameter type from buf * to sockaddr *.
final commit for parameter type changes to protocol user requests
* bump kernel version to 7.99.15 for parameter type changes to pr_{send,connect}
|
1.27 |
| 26-Apr-2015 |
rtr | remove pr_generic from struct pr_usrreqs and all implementations of pr_generic in protocols.
bump to 7.99.13
approved by rmind@
|
1.26 |
| 24-Apr-2015 |
rtr | make accept, getsockname and getpeername syscalls use sockaddr_big and modify pr_{accept,sockname,peername} nam parameter type from mbuf * to sockaddr *.
* retained use of mbuftypes[MT_SONAME] for now. * bump to netbsd version 7.99.12 for parameter type change.
patch posted to tech-net@ 2015/04/19
|
1.25 |
| 03-Apr-2015 |
rtr | * change pr_bind to accept struct sockaddr * instead of struct mbuf * * update protocol bind implementations to use/expect sockaddr * instead of mbuf * * introduce sockaddr_big struct for storage of addr data passed via sys_bind; sockaddr_big is of sufficient size and alignment to accommodate all addr data sizes received. * modify sys_bind to allocate sockaddr_big instead of using an mbuf. * bump kernel version to 7.99.9 for change to pr_bind() parameter type.
Patch posted to tech-net@ http://mail-index.netbsd.org/tech-net/2015/03/15/msg005004.html
The choice to use a new structure sockaddr_big has been retained since changing sockaddr_storage size would lead to unnecessary ABI change. The use of the new structure does not preclude future work that increases the size of sockaddr_storage and at that time sockaddr_big may be trivially replaced.
Tested by mrg@ and myself, discussed with rmind@, posted to tech-net@
|
1.24 |
| 09-Aug-2014 |
rtr | branches: 1.24.2; 1.24.4; 1.24.6; 1.24.10; split PRU_CONNECT2 & PRU_PURGEIF function out of pr_generic() usrreq switches and put into separate functions
- always KASSERT(solocked(so)) even if not implemented (for PRU_CONNECT2 only)
- replace calls to pr_generic() with req = PRU_CONNECT2 with calls to pr_connect2()
- replace calls to pr_generic() with req = PRU_PURGEIF with calls to pr_purgeif()
put common code from unp_connect2() (used by unp_connect() into unp_connect1() and call out to it when needed
patch only briefly reviewed by rmind@
|
1.23 |
| 08-Aug-2014 |
rtr | split PRU_RCVD function out of pr_generic() usrreq switches and put into separate functions
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req = PRU_RCVD with calls to pr_rcvd()
|
1.22 |
| 05-Aug-2014 |
rtr | split PRU_SEND function out of pr_generic() usrreq switches and put into separate functions
xxx_send(struct socket *, struct mbuf *, struct mbuf *, struct mbuf *, struct lwp *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req = PRU_SEND with calls to pr_send()
rename existing functions that operate on PCB for consistency (and to free up their names for xxx_send() PRUs
- l2cap_send() -> l2cap_send_pcb() - sco_send() -> sco_send_pcb() - rfcomm_send() -> rfcomm_send_pcb()
patch reviewed by rmind
|
1.21 |
| 05-Aug-2014 |
rtr | revert the removal of struct lwp * parameter from bind, listen and connect user requests.
this should resolve the issue relating to nfs client hangs presented recently by wiz on current-users@
|
1.20 |
| 31-Jul-2014 |
rtr | split PRU_CONNECT, PRU_RCVOOB and PRU_SENDOOB into separate functions (all implemented as EOPNOTSUPP).
|
1.19 |
| 31-Jul-2014 |
rtr | split PRU_DISCONNECT, PRU_SHUTDOWN and PRU_ABORT function out of pr_generic() usrreq switches and put into separate functions
xxx_disconnect(struct socket *) xxx_shutdown(struct socket *) xxx_abort(struct socket *)
- always KASSERT(solocked(so)) even if not implemented - replace calls to pr_generic() with req = PRU_{DISCONNECT,SHUTDOWN,ABORT} with calls to pr_{disconnect,shutdown,abort}() respectively
rename existing internal functions used to implement above functionality to permit use of the names for xxx_{disconnect,shutdown,abort}().
- {l2cap,sco,rfcomm}_disconnect() -> {l2cap,sco,rfcomm}_disconnect_pcb() - {unp,rip,tcp}_disconnect() -> {unp,rip,tcp}_disconnect1() - unp_shutdown() -> unp_shutdown1()
patch reviewed by rmind
|
1.18 |
| 24-Jul-2014 |
rtr | split PRU_BIND and PRU_LISTEN function out of pr_generic() usrreq switches and put into separate functions xxx_bind(struct socket *, struct mbuf *) xxx_listen(struct socket *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req = PRU_BIND with call to pr_bind()
- replace calls to pr_generic() with req = PRU_LISTEN with call to pr_listen()
- drop struct lwp * parameter from at_pcbsetaddr(), in_pcbbind() and unp_bind() and always use curlwp.
rename existing functions that operate on PCB for consistency (and to free up their names for xxx_{bind,listen}() PRUs
- l2cap_{bind,listen}() -> l2cap_{bind,listen}_pcb() - sco_{bind,listen}() -> sco_{bind,listen}_pcb() - rfcomm_{bind,listen}() -> rfcomm_{bind,listen}_pcb()
patch reviewed by rmind
welcome to netbsd 6.99.48
|
1.17 |
| 21-Jul-2014 |
ozaki-r | Don't assume if_init is always set
if_init may be NULL, e.g., if_vlan.
PR kern/48997
|
1.16 |
| 15-Jul-2014 |
joerg | socklen_t is not uint8_t, so don't print it as such.
|
1.15 |
| 09-Jul-2014 |
rtr | * split PRU_PEERADDR and PRU_SOCKADDR function out of pr_generic() usrreq switches and put into separate functions xxx_{peer,sock}addr(struct socket *, struct mbuf *).
- KASSERT(solocked(so)) always in new functions even if request is not implemented
- KASSERT(pcb != NULL) and KASSERT(nam) if the request is implemented and not for tcp.
* for tcp roll #ifdef KPROF and #ifdef DEBUG code from tcp_usrreq() into easier to cut & paste functions tcp_debug_capture() and tcp_debug_trace()
- functions provided by rmind - remaining use of PRU_{PEER,SOCK}ADDR #define to be removed in a future commit.
* rename netbt functions to permit consistency of pru function names (as has been done with other requests already split out).
- l2cap_{peer,sock}addr() -> l2cap_{peer,sock}_addr_pcb() - rfcomm_{peer,sock}addr() -> rfcomm_{peer,sock}_addr_pcb() - sco_{peer,sock}addr() -> sco_{peer,sock}_addr_pcb()
* split/refactor do_sys_getsockname(lwp, fd, which, nam) into two functions do_sys_get{peer,sock}name(fd, nam).
- move PRU_PEERADDR handling into do_sys_getpeername() from do_sys_getsockname() - have svr4_stream directly call do_sys_get{sock,peer}name() respectively instead of providing `which' & fix a DPRINTF string that incorrectly wrote "getpeername" when it meant "getsockname" - fix sys_getpeername() and sys_getsockname() to call do_sys_get{sock,peer}name() without `which' and `lwp' & adjust comments - bump kernel version for removal of lwp & which parameters from do_sys_getsockname()
note: future cleanup to remove struct mbuf * abuse in xxx_{peer,sock}name() still to come, not done in this commit since it is easier to do post split.
patch reviewed by rmind
welcome to 6.99.47
|
1.14 |
| 07-Jul-2014 |
rtr | * sprinkle KASSERT(solocked(so)); in all pr_stat() functions. * fix remaining inconsistent struct socket parameter names.
|
1.13 |
| 06-Jul-2014 |
rtr | * split PRU_SENSE functionality out of link_usrreq() and place into separate link_stat(struct socket *, struct stat *) function
|
1.12 |
| 01-Jul-2014 |
rtr | fix parameter types in pr_ioctl, called xx_control() functions and remove abuse of pointer to struct mbuf type.
param2 changed to u_long type and uses parameter name 'cmd' (ioctl command) param3 changed to void * type and uses parameter name 'data' param4 changed to struct ifnet * and uses parameter name 'ifp' param5 has been removed (formerly struct lwp *) and uses of 'l' have been replaced with curlwp from curproc(9).
callers have had (now unnecessary) casts to struct mbuf * removed, called code has had (now unnecessary) casts to u_long, void * and struct ifnet * respectively removed.
reviewed by rmind@
|
1.11 |
| 23-Jun-2014 |
rtr | where appropriate rename xxx_ioctl() struct mbuf * parameters from `control' to `ifp' after split from xxx_usrreq().
sys_socket.c fix wrapping of arguments to be consistent with other function calls in the file after replacing pr_usrreq() call with pr_ioctl() which required one less argument.
link_proto.c fix indentation of parameters in link_ioctl() prototype to be consistent with the rest of the file.
discussed with rmind@
|
1.10 |
| 22-Jun-2014 |
rtr | * split PRU_CONTROL functionality out of xxx_userreq() switches and place into separate xxx_ioctl() functions. * place KASSERT(req != PRU_CONTROL) inside xxx_userreq() as it is now inappropriate for req = PRU_CONTROL in xxx_userreq(). * replace calls to pr_generic() with req = PRU_CONTROL with pr_ioctl(). * remove & fixup references to PRU_CONTROL xxx_userreq() function comments. * fix various comments references for xxx_userreq() that mentioned PRU_CONTROL as xxx_userreq() no longer handles the request.
a further change will follow to fix parameter and naming inconsistencies retained from original code.
Reviewed by rmind@
|
1.9 |
| 19-May-2014 |
rmind | - Split off PRU_ATTACH and PRU_DETACH logic into separate functions. - Replace malloc with kmem and eliminate M_PCB while here. - Sprinkle more asserts.
|
1.8 |
| 18-May-2014 |
rmind | Add struct pr_usrreqs with a pr_generic function and prepare for the dismantling of pr_usrreq in the protocols; no functional change intended. PRU_ATTACH/PRU_DETACH changes will follow soon.
Bump for struct protosw. Welcome to 6.99.62!
|
1.7 |
| 07-Oct-2011 |
dyoung | branches: 1.7.8; 1.7.12; 1.7.14; 1.7.16; 1.7.22; 1.7.26; Cosmetic: remove whitespace at the end of line.
|
1.6 |
| 12-Nov-2010 |
roy | Add RTM_CHGADDR to signal that an address on the interface has changed. This is mainly used for notifying userland about active link address changes.
|
1.5 |
| 07-Nov-2008 |
dyoung | branches: 1.5.8; *** Summary ***
When a link-layer address changes (e.g., ifconfig ex0 link 02:de:ad:be:ef:02 active), send a gratuitous ARP and/or a Neighbor Advertisement to update the network-/link-layer address bindings on our LAN peers.
Refuse a change of ethernet address to the address 00:00:00:00:00:00 or to any multicast/broadcast address. (Thanks matt@.)
Reorder ifnet ioctl operations so that driver ioctls may inherit the functions of their "class"---ether_ioctl(), fddi_ioctl(), et cetera---and the class ioctls may inherit from the generic ioctl, ifioctl_common(), but both driver- and class-ioctls may override the generic behavior. Make network drivers share more code.
Distinguish a "factory" link-layer address from others for the purposes of both protecting that address from deletion and computing EUI64.
Return consistent, appropriate error codes from network drivers.
Improve readability. KNF.
*** Details ***
In if_attach(), always initialize the interface ioctl routine, ifnet->if_ioctl, if the driver has not already initialized it. Delete if_ioctl == NULL tests everywhere else, because it cannot happen.
In the ioctl routines of network interfaces, inherit common ioctl behaviors by calling either ifioctl_common() or whichever ioctl routine is appropriate for the class of interface---e.g., ether_ioctl() for ethernets.
Stop (ab)using SIOCSIFADDR and start to use SIOCINITIFADDR. In the user->kernel interface, SIOCSIFADDR's argument was an ifreq, but on the protocol->ifnet interface, SIOCSIFADDR's argument was an ifaddr. That was confusing, and it would work against me as I make it possible for a network interface to overload most ioctls. On the protocol->ifnet interface, replace SIOCSIFADDR with SIOCINITIFADDR. In ifioctl(), return EPERM if userland tries to invoke SIOCINITIFADDR.
In ifioctl(), give the interface the first shot at handling most interface ioctls, and give the protocol the second shot, instead of the other way around. Finally, let compatibility code (COMPAT_OSOCK) take a shot.
Pull device initialization out of switch statements under SIOCINITIFADDR. For example, pull ..._init() out of any switch statement that looks like this:
switch (...->sa_family) { case ...: ..._init(); ... break; ... default: ..._init(); ... break; }
Rewrite many if-else clauses that handle all permutations of IFF_UP and IFF_RUNNING to use a switch statement,
switch (x & (IFF_UP|IFF_RUNNING)) { case 0: ... break; case IFF_RUNNING: ... break; case IFF_UP: ... break; case IFF_UP|IFF_RUNNING: ... break; }
unifdef lots of code containing #ifdef FreeBSD, #ifdef NetBSD, and #ifdef SIOCSIFMTU, especially in fwip(4) and in ndis(4).
In ipw(4), remove an if_set_sadl() call that is out of place.
In nfe(4), reuse the jumbo MTU logic in ether_ioctl().
Let ethernets register a callback for setting h/w state such as promiscuous mode and the multicast filter in accord with a change in the if_flags: ether_set_ifflags_cb() registers a callback that returns ENETRESET if the caller should reset the ethernet by calling if_init(), 0 on success, != 0 on failure. Pull common code from ex(4), gem(4), nfe(4), sip(4), tlp(4), vge(4) into ether_ioctl(), and register if_flags callbacks for those drivers.
Return ENOTTY instead of EINVAL for inappropriate ioctls. In zyd(4), use ENXIO instead of ENOTTY to indicate that the device is not any longer attached.
Add to if_set_sadl() a boolean 'factory' argument that indicates whether a link-layer address was assigned by the factory or some other source. In a comment, recommend using the factory address for generating an EUI64, and update in6_get_hw_ifid() to prefer a factory address to any other link-layer address.
Add a routing message, RTM_LLINFO_UPD, that tells protocols to update the binding of network-layer addresses to link-layer addresses. Implement this message in IPv4 and IPv6 by sending a gratuitous ARP or a neighbor advertisement, respectively. Generate RTM_LLINFO_UPD messages on a change of an interface's link-layer address.
In ether_ioctl(), do not let SIOCALIFADDR set a link-layer address that is broadcast/multicast or equal to 00:00:00:00:00:00.
Make ether_ioctl() call ifioctl_common() to handle ioctls that it does not understand.
In gif(4), initialize if_softc and use it, instead of assuming that the gif_softc and ifp overlap.
Let ifioctl_common() handle SIOCGIFADDR.
Sprinkle rtcache_invariants(), which checks on DIAGNOSTIC kernels that certain invariants on a struct route are satisfied.
In agr(4), rewrite agr_ioctl_filter() to be a bit more explicit about the ioctls that we do not allow on an agr(4) member interface.
bzero -> memset. Delete unnecessary casts to void *. Use sockaddr_in_init() and sockaddr_in6_init(). Compare pointers with NULL instead of "testing truth". Replace some instances of (type *)0 with NULL. Change some K&R prototypes to ANSI C, and join lines.
|
1.4 |
| 13-May-2008 |
dyoung | branches: 1.4.4; 1.4.6; Let us call ioctl(SIOC[ADG]LIFADDR) with a link-layer address on an AF_LINK socket, only, to be consistent with SIOC[ADG]LIFADDR behavior on AF_INET and AF_INET6 sockets. Let us create AF_LINK sockets for this purpose. Note that most operations on AF_LINK sockets are not implemented.
|
1.3 |
| 30-Aug-2007 |
dyoung | branches: 1.3.2; 1.3.22; 1.3.24; 1.3.26; 1.3.28; Use malloc(9) for sockaddrs instead of pool(9), and remove dom_sa_pool and dom_sa_len members from struct domain. Pools of fixed-size objects are too rigid for sockaddr_dls, whose size can vary over a wide range.
Return sockaddr_dl to its "historical" size. Now that I'm using malloc(9) instead of pool(9) to allocate sockaddr_dl, I can create a sockaddr_dl of any size in the kernel, so expanding sockaddr_dl is useless.
Avoid using sizeof(struct sockaddr_dl) in the kernel.
Introduce sockaddr_dl_alloc() for allocating & initializing an arbitrary sockaddr_dl on the heap.
Add an argument, the sockaddr length, to sockaddr_alloc(), sockaddr_copy(), and sockaddr_dl_setaddr().
Constify: LLADDR() -> CLLADDR().
Where the kernel overwrites LLADDR(), use sockaddr_dl_setaddr(), instead. Used properly, sockaddr_dl_setaddr() will not overrun the end of the sockaddr.
|
1.2 |
| 07-Aug-2007 |
dyoung | branches: 1.2.2; 1.2.4; 1.2.6; 1.2.8; Lengthen sockaddr_dl so that a 16-byte FireWire address will fit into sdl_data[].
Move the macro satocsdl() to net/if_dl.h, and introduce satosdl().
Add some helpers for initializing sockaddr_dl (sockaddr_dl_init), for finding out the length to put in a sockaddr_dl's sdl_len member (sockaddr_dl_measure), and for setting the link-layer address in a sockaddr_dl to a new value (sockaddr_dl_setaddr).
Make sockaddr_copy() panic if the caller tries to copy a sockaddr to a destination where it will not fit.
|
1.1 |
| 19-Jul-2007 |
dyoung | branches: 1.1.4; Take steps to hide the radix_node implementation of the forwarding table from the forwarding table's users:
Introduce rt_walktree() for walking the routing table and applying a function to each rtentry. Replace most rn_walktree() calls with it.
Use rt_getkey()/rt_setkey() to get/set a route's destination. Keep a pointer to the sockaddr key in the rtentry, so that rtentry users do not have to grovel in the radix_node for the key.
Add a RTM_GET method to rtrequest. Use that instead of radix_node lookups in, e.g., carp(4).
Add sys/net/link_proto.c, which supplies sockaddr routines for link-layer socket addresses (sockaddr_dl).
Cosmetic:
Constify. KNF. Stop open-coding LIST_FOREACH, TAILQ_FOREACH, et cetera. Use NULL instead of 0 for null pointers. Use __arraycount(). Reduce gratuitous parenthesization.
Stop using variadic arguments for rip6_output(), it is unnecessary.
Remove the unnecessary rtentry member rt_genmask and the code to maintain it, since nothing actually used it.
Make rt_maskedcopy() easier to read by using meaningful variable names.
Extract a subroutine intern_netmask() for looking up a netmask in the masks table.
Start converting backslash-ridden IPv6 macros in sys/netinet6/in6_var.h into inline subroutines that one can read without special eyeglasses.
One functional change: when the kernel serves an RTM_GET, RTM_LOCK, or RTM_CHANGE request, it applies the netmask (if supplied) to a destination before searching for it in the forwarding table.
I have changed sys/netinet/ip_carp.c, carp_setroute(), to remove the unlawful radix_node knowledge.
Apart from the changes to carp(4), netiso, ATM, and strip(4), I have run the changes on three nodes in my wireless routing testbed, which involves IPv4 + IPv6 dynamic routing acrobatics, and it's working beautifully so far.
|
1.1.4.2 |
| 03-Sep-2007 |
jmcneill | Sync with HEAD.
|
1.1.4.1 |
| 09-Aug-2007 |
jmcneill | Sync with HEAD.
|
1.2.8.2 |
| 07-Aug-2007 |
dyoung | Lengthen sockaddr_dl so that a 16-byte FireWire address will fit into sdl_data[].
Move the macro satocsdl() to net/if_dl.h, and introduce satosdl().
Add some helpers for initializing sockaddr_dl (sockaddr_dl_init), for finding out the length to put in a sockaddr_dl's sdl_len member (sockaddr_dl_measure), and for setting the link-layer address in a sockaddr_dl to a new value (sockaddr_dl_setaddr).
Make sockaddr_copy() panic if the caller tries to copy a sockaddr to a destination where it will not fit.
|
1.2.8.1 |
| 07-Aug-2007 |
dyoung | file link_proto.c was added on branch matt-mips64 on 2007-08-07 04:06:21 +0000
|
1.2.6.1 |
| 06-Nov-2007 |
matt | sync with HEAD
|
1.2.4.3 |
| 09-Oct-2007 |
ad | Sync with head.
|
1.2.4.2 |
| 20-Aug-2007 |
ad | Sync with HEAD.
|
1.2.4.1 |
| 07-Aug-2007 |
ad | file link_proto.c was added on branch vmlocking on 2007-08-20 22:07:08 +0000
|
1.2.2.3 |
| 03-Sep-2007 |
skrll | Sync with HEAD.
|
1.2.2.2 |
| 15-Aug-2007 |
skrll | Sync with HEAD.
|
1.2.2.1 |
| 07-Aug-2007 |
skrll | file link_proto.c was added on branch nick-csl-alignment on 2007-08-15 13:49:41 +0000
|
1.3.28.1 |
| 23-Jun-2008 |
wrstuden | Sync w/ -current. 34 merge conflicts to follow.
|
1.3.26.2 |
| 04-May-2009 |
yamt | sync with head.
|
1.3.26.1 |
| 16-May-2008 |
yamt | sync with head.
|
1.3.24.1 |
| 18-May-2008 |
yamt | sync with head.
|
1.3.22.2 |
| 17-Jan-2009 |
mjf | Sync with HEAD.
|
1.3.22.1 |
| 02-Jun-2008 |
mjf | Sync with HEAD.
|
1.3.2.2 |
| 03-Sep-2007 |
yamt | sync with head.
|
1.3.2.1 |
| 30-Aug-2007 |
yamt | file link_proto.c was added on branch yamt-lazymbuf on 2007-09-03 14:42:21 +0000
|
1.4.6.1 |
| 19-Jan-2009 |
skrll | Sync with HEAD.
|
1.4.4.1 |
| 13-Dec-2008 |
haad | Update haad-dm branch to haad-dm-base2.
|
1.5.8.1 |
| 05-Mar-2011 |
rmind | sync with head
|
1.7.26.1 |
| 10-Aug-2014 |
tls | Rebase.
|
1.7.22.1 |
| 07-Aug-2014 |
msaitoh | Pull up following revision(s) (requested by ozaki-r in ticket #1103): sys/net/link_proto.c revision 1.17 Don't assume if_init is always set. if_init may be NULL, e.g., if_vlan. PR kern/48997.
|
1.7.16.2 |
| 18-May-2014 |
rmind | sync with head
|
1.7.16.1 |
| 28-Aug-2013 |
rmind | Checkpoint work in progress: - Initial split of the protocol user-request method into the following methods: pr_attach, pr_detach and pr_generic for old the pr_usrreq. - Adjust socreate(9) and sonewconn(9) to call pr_attach without the socket lock held (as a preparation for the locking scheme adjustment). - Adjust all pr_attach routines to assert that PCB is not set. - Sprinkle various comments, document some routines and their locking. - Remove M_PCB, replace with kmem(9). - Fix few bugs spotted on the way.
|
1.7.14.1 |
| 07-Aug-2014 |
msaitoh | Pull up following revision(s) (requested by ozaki-r in ticket #1103): sys/net/link_proto.c revision 1.17 Don't assume if_init is always set. if_init may be NULL, e.g., if_vlan. PR kern/48997.
|
1.7.12.2 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
1.7.12.1 |
| 20-Aug-2014 |
tls | Rebase to HEAD as of a few days ago.
|
1.7.8.1 |
| 07-Aug-2014 |
msaitoh | Pull up following revision(s) (requested by ozaki-r in ticket #1103): sys/net/link_proto.c revision 1.17 Don't assume if_init is always set. if_init may be NULL, e.g., if_vlan. PR kern/48997.
|
1.24.10.1 |
| 29-Jan-2019 |
msaitoh | Pull up following revision(s) (requested by martin in ticket #1676): sys/net/link_proto.c 1.37 sys/netatalk/ddp_usrreq.c 1.72 sys/netbt/hci_socket.c 1.46 sys/netbt/l2cap_socket.c 1.36 sys/netbt/rfcomm_socket.c 1.38 sys/netbt/sco_socket.c 1.38 sys/netinet/tcp_usrreq.c 1.223 via patch sys/netinet6/raw_ip6.c 1.173 sys/netinet6/udp6_usrreq.c 1.146 sys/netmpls/mpls_proto.c 1.32 sys/netnatm/natm.c patch
Fix memory leaks pointed out by Ilja Van Sprundel: all sendoob() functions are expted to free both passed mbuf chains.
|
1.24.6.1 |
| 29-Jan-2019 |
msaitoh | Pull up following revision(s) (requested by martin in ticket #1676): sys/net/link_proto.c 1.37 sys/netatalk/ddp_usrreq.c 1.72 sys/netbt/hci_socket.c 1.46 sys/netbt/l2cap_socket.c 1.36 sys/netbt/rfcomm_socket.c 1.38 sys/netbt/sco_socket.c 1.38 sys/netinet/tcp_usrreq.c 1.223 via patch sys/netinet6/raw_ip6.c 1.173 sys/netinet6/udp6_usrreq.c 1.146 sys/netmpls/mpls_proto.c 1.32 sys/netnatm/natm.c patch
Fix memory leaks pointed out by Ilja Van Sprundel: all sendoob() functions are expted to free both passed mbuf chains.
|
1.24.4.5 |
| 05-Feb-2017 |
skrll | Sync with HEAD
|
1.24.4.4 |
| 05-Dec-2016 |
skrll | Sync with HEAD
|
1.24.4.3 |
| 09-Jul-2016 |
skrll | Sync with HEAD
|
1.24.4.2 |
| 06-Jun-2015 |
skrll | Sync with HEAD
|
1.24.4.1 |
| 06-Apr-2015 |
skrll | Sync with HEAD
|
1.24.2.1 |
| 29-Jan-2019 |
msaitoh | Pull up following revision(s) (requested by martin in ticket #1676): sys/net/link_proto.c 1.37 sys/netatalk/ddp_usrreq.c 1.72 sys/netbt/hci_socket.c 1.46 sys/netbt/l2cap_socket.c 1.36 sys/netbt/rfcomm_socket.c 1.38 sys/netbt/sco_socket.c 1.38 sys/netinet/tcp_usrreq.c 1.223 via patch sys/netinet6/raw_ip6.c 1.173 sys/netinet6/udp6_usrreq.c 1.146 sys/netmpls/mpls_proto.c 1.32 sys/netnatm/natm.c patch
Fix memory leaks pointed out by Ilja Van Sprundel: all sendoob() functions are expted to free both passed mbuf chains.
|
1.31.2.3 |
| 26-Apr-2017 |
pgoyette | Sync with HEAD
|
1.31.2.2 |
| 20-Mar-2017 |
pgoyette | Sync with HEAD
|
1.31.2.1 |
| 07-Jan-2017 |
pgoyette | Sync with HEAD. (Note that most of these changes are simply $NetBSD$ tag issues.)
|
1.34.2.1 |
| 21-Apr-2017 |
bouyer | Sync with HEAD
|
1.36.14.2 |
| 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
1.36.14.1 |
| 10-Jun-2019 |
christos | Sync with HEAD
|
1.36.6.1 |
| 29-Jan-2019 |
msaitoh | Pull up following revision(s) (requested by martin in ticket #1175): sys/net/link_proto.c 1.37 sys/netatalk/ddp_usrreq.c 1.72 sys/netbt/hci_socket.c 1.46 sys/netbt/l2cap_socket.c 1.36 sys/netbt/rfcomm_socket.c 1.38 sys/netbt/sco_socket.c 1.38 sys/netinet/sctp_usrreq.c 1.14 sys/netinet/tcp_usrreq.c 1.223 sys/netinet6/raw_ip6.c 1.173 sys/netinet6/sctp6_usrreq.c 1.17 sys/netinet6/udp6_usrreq.c 1.146 sys/netmpls/mpls_proto.c 1.32 sys/netnatm/natm.c patch
Fix memory leaks pointed out by Ilja Van Sprundel: all sendoob() functions are expted to free both passed mbuf chains.
|