| History log of /src/sys/netbt/rfcomm.h |
| Revision | | Date | Author | Comments |
| 1.20 |
| 07-Sep-2025 |
andvar | Fix various typos, mainly in comments.
|
| 1.19 |
| 28-May-2022 |
andvar | fix various typos in comments, mainly origional->original,
extened->extended, incomming->incoming.
|
| 1.18 |
| 08-Aug-2014 |
rtr | split PRU_RCVD function out of pr_generic() usrreq switches and put into
separate functions
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req = PRU_RCVD with calls to
pr_rcvd()
|
| 1.17 |
| 05-Aug-2014 |
rtr | split PRU_SEND function out of pr_generic() usrreq switches and put into
separate functions
xxx_send(struct socket *, struct mbuf *, struct mbuf *,
struct mbuf *, struct lwp *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req = PRU_SEND with calls to
pr_send()
rename existing functions that operate on PCB for consistency (and to
free up their names for xxx_send() PRUs
- l2cap_send() -> l2cap_send_pcb()
- sco_send() -> sco_send_pcb()
- rfcomm_send() -> rfcomm_send_pcb()
patch reviewed by rmind
|
| 1.16 |
| 31-Jul-2014 |
rtr | split PRU_DISCONNECT, PRU_SHUTDOWN and PRU_ABORT function out of
pr_generic() usrreq switches and put into separate functions
xxx_disconnect(struct socket *)
xxx_shutdown(struct socket *)
xxx_abort(struct socket *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req =
PRU_{DISCONNECT,SHUTDOWN,ABORT}
with calls to pr_{disconnect,shutdown,abort}() respectively
rename existing internal functions used to implement above functionality
to permit use of the names for xxx_{disconnect,shutdown,abort}().
- {l2cap,sco,rfcomm}_disconnect() ->
{l2cap,sco,rfcomm}_disconnect_pcb()
- {unp,rip,tcp}_disconnect() -> {unp,rip,tcp}_disconnect1()
- unp_shutdown() -> unp_shutdown1()
patch reviewed by rmind
|
| 1.15 |
| 30-Jul-2014 |
rtr | split PRU_CONNECT function out of pr_generic() usrreq switches and put
into seaparate functions
xxx_listen(struct socket *, struct mbuf *)
- always KASSERT(solocked(so)) and KASSERT(nam != NULL)
- replace calls to pr_generic() with req = PRU_CONNECT with
pr_connect()
- rename existin {l2cap,sco,rfcomm}_connect() to
{l2cap,sco,rfcomm}_connect_pcb() respectively to permit
naming consistency with other protocols functions.
- drop struct lwp * parameter from unp_connect() and at_pcbconnect()
and use curlwp instead where appropriate.
patch reviewed by rmind
|
| 1.14 |
| 24-Jul-2014 |
rtr | split PRU_BIND and PRU_LISTEN function out of pr_generic() usrreq
switches and put into separate functions
xxx_bind(struct socket *, struct mbuf *)
xxx_listen(struct socket *)
- always KASSERT(solocked(so)) even if not implemented
- replace calls to pr_generic() with req = PRU_BIND with call to
pr_bind()
- replace calls to pr_generic() with req = PRU_LISTEN with call to
pr_listen()
- drop struct lwp * parameter from at_pcbsetaddr(), in_pcbbind() and
unp_bind() and always use curlwp.
rename existing functions that operate on PCB for consistency (and to
free up their names for xxx_{bind,listen}() PRUs
- l2cap_{bind,listen}() -> l2cap_{bind,listen}_pcb()
- sco_{bind,listen}() -> sco_{bind,listen}_pcb()
- rfcomm_{bind,listen}() -> rfcomm_{bind,listen}_pcb()
patch reviewed by rmind
welcome to netbsd 6.99.48
|
| 1.13 |
| 09-Jul-2014 |
rtr | * split PRU_PEERADDR and PRU_SOCKADDR function out of pr_generic()
usrreq switches and put into separate functions
xxx_{peer,sock}addr(struct socket *, struct mbuf *).
- KASSERT(solocked(so)) always in new functions even if request
is not implemented
- KASSERT(pcb != NULL) and KASSERT(nam) if the request is
implemented and not for tcp.
* for tcp roll #ifdef KPROF and #ifdef DEBUG code from tcp_usrreq() into
easier to cut & paste functions tcp_debug_capture() and
tcp_debug_trace()
- functions provided by rmind
- remaining use of PRU_{PEER,SOCK}ADDR #define to be removed in a
future commit.
* rename netbt functions to permit consistency of pru function names
(as has been done with other requests already split out).
- l2cap_{peer,sock}addr() -> l2cap_{peer,sock}_addr_pcb()
- rfcomm_{peer,sock}addr() -> rfcomm_{peer,sock}_addr_pcb()
- sco_{peer,sock}addr() -> sco_{peer,sock}_addr_pcb()
* split/refactor do_sys_getsockname(lwp, fd, which, nam) into
two functions do_sys_get{peer,sock}name(fd, nam).
- move PRU_PEERADDR handling into do_sys_getpeername() from
do_sys_getsockname()
- have svr4_stream directly call do_sys_get{sock,peer}name()
respectively instead of providing `which' & fix a DPRINTF string
that incorrectly wrote "getpeername" when it meant "getsockname"
- fix sys_getpeername() and sys_getsockname() to call
do_sys_get{sock,peer}name() without `which' and `lwp' & adjust
comments
- bump kernel version for removal of lwp & which parameters from
do_sys_getsockname()
note: future cleanup to remove struct mbuf * abuse in
xxx_{peer,sock}name()
still to come, not done in this commit since it is easier to do post
split.
patch reviewed by rmind
welcome to 6.99.47
|
| 1.12 |
| 20-May-2014 |
rmind | netbt: rename some attach/detach functions to have _pcb suffix, so
we could use standard attach/detach naming for pr_usrreq functions.
No functional change.
|
| 1.11 |
| 19-May-2014 |
rmind | - Split off PRU_ATTACH and PRU_DETACH logic into separate functions.
- Replace malloc with kmem and eliminate M_PCB while here.
- Sprinkle more asserts.
|
| 1.10 |
| 18-May-2014 |
rmind | Add struct pr_usrreqs with a pr_generic function and prepare for the
dismantling of pr_usrreq in the protocols; no functional change intended.
PRU_ATTACH/PRU_DETACH changes will follow soon.
Bump for struct protosw. Welcome to 6.99.62!
|
| 1.9 |
| 13-Sep-2009 |
pooka | branches: 1.9.22; 1.9.26; 1.9.36;
Wipe out the last vestiges of POOL_INIT with one swift stroke. In
most cases, use a proper constructor. For proplib, give a local
equivalent of POOL_INIT for the kernel object implementation. This
way the code structure can be preserved, and a local link set is
not hazardous anyway (unless proplib is split to several modules,
but that'll be the day).
tested by booting a kernel in qemu and compile-testing i386/ALL
|
| 1.8 |
| 08-Sep-2008 |
gmcgarry | Replace most gcc-specific __attribute__ uses with BSD-style sys/cdef.h
preprocessor macros.
|
| 1.7 |
| 06-Aug-2008 |
plunky | Convert socket options code to use a sockopt structure
instead of laying everything into an mbuf.
approved by core
|
| 1.6 |
| 20-Nov-2007 |
plunky | branches: 1.6.14; 1.6.18; 1.6.20; 1.6.24;
allow listening to channel RFCOMM_CHANNEL_ANY, which means that
we should allocate the first available channel at the given
device address.
|
| 1.5 |
| 03-Nov-2007 |
plunky | branches: 1.5.2;
struct callout => callout_t
|
| 1.4 |
| 03-Nov-2007 |
plunky | "struct callout" -> callout_t
don't use callout_reset()
do use callout_destroy()
|
| 1.3 |
| 21-Apr-2007 |
plunky | branches: 1.3.6; 1.3.8; 1.3.12;
Add 'service level' security for L2CAP and RFCOMM connections, following
the Linux (BlueZ) API.
- L2CAP or RFCOMM connections can require the baseband radio link
mode be any of:
authenticated (devices are paired)
encrypted (implies authentication)
secured (encryption, plus generate new link key)
- for sockets, the mode is set using setsockopt(2) and the socket
connection will be aborted if the mode change fails.
- mode settings will be applied during connection establishment, and
for safety, we enter a wait state and will only proceed when the mode
settings are successfuly set.
- It is possible to change the mode on already open connections, but
not possible to guarantee that data already queued (from either end)
will not be delivered. (this is a feature, not a bug)
- bthidev(4) and rfcomm_sppd(1) support "auth", "encrypt" and
"secure" options
- btdevctl(8) by default enables "auth" for HIDs, and "encrypt" for
keyboards (which are required to support it)
|
| 1.2 |
| 01-Oct-2006 |
plunky | branches: 1.2.2; 1.2.4; 1.2.8; 1.2.10; 1.2.16;
fix silent dependencies (uintN_t)
|
| 1.1 |
| 19-Jun-2006 |
gdamore | branches: 1.1.2; 1.1.4; 1.1.6; 1.1.8; 1.1.12; 1.1.14; 1.1.16;
Initial import of bluetooth stack on behalf of Iain Hibbert. (plunky@,
NetBSD Foundation Membership still pending.) This stack was written by
Iain under sponsorship from Itronix Inc.
The stack includes support for rfcomm networking (networking via your
bluetooth enabled cell phone), hid devices (keyboards/mice), and headsets.
Drivers for both PCMCIA and USB bluetooth controllers are included.
|
| 1.1.16.1 |
| 22-Oct-2006 |
yamt | sync with head
|
| 1.1.14.2 |
| 09-Sep-2006 |
rpaulo | sync with head
|
| 1.1.14.1 |
| 19-Jun-2006 |
rpaulo | file rfcomm.h was added on branch rpaulo-netinet-merge-pcb on 2006-09-09 02:58:39 +0000
|
| 1.1.12.1 |
| 18-Nov-2006 |
ad | Sync with head.
|
| 1.1.8.2 |
| 13-Jul-2006 |
gdamore | Merge from HEAD.
|
| 1.1.8.1 |
| 19-Jun-2006 |
gdamore | file rfcomm.h was added on branch gdamore-uart on 2006-07-13 17:49:58 +0000
|
| 1.1.6.2 |
| 26-Jun-2006 |
yamt | sync with head.
|
| 1.1.6.1 |
| 19-Jun-2006 |
yamt | file rfcomm.h was added on branch yamt-pdpolicy on 2006-06-26 12:53:57 +0000
|
| 1.1.4.2 |
| 22-Jun-2006 |
chap | Complete a sync sys/ with head.
|
| 1.1.4.1 |
| 19-Jun-2006 |
chap | file rfcomm.h was added on branch chap-midi on 2006-06-22 03:39:50 +0000
|
| 1.1.2.6 |
| 07-Dec-2007 |
yamt | sync with head
|
| 1.1.2.5 |
| 15-Nov-2007 |
yamt | sync with head.
|
| 1.1.2.4 |
| 03-Sep-2007 |
yamt | sync with head.
|
| 1.1.2.3 |
| 30-Dec-2006 |
yamt | sync with head.
|
| 1.1.2.2 |
| 21-Jun-2006 |
yamt | sync with head.
|
| 1.1.2.1 |
| 19-Jun-2006 |
yamt | file rfcomm.h was added on branch yamt-lazymbuf on 2006-06-21 15:10:51 +0000
|
| 1.2.16.1 |
| 03-Sep-2007 |
wrstuden | Sync w/ NetBSD-4-RC_1
|
| 1.2.10.1 |
| 11-Jul-2007 |
mjf | Sync with head.
|
| 1.2.8.1 |
| 08-Jun-2007 |
ad | Sync with head.
|
| 1.2.4.1 |
| 07-May-2007 |
yamt | sync with head.
|
| 1.2.2.1 |
| 19-Jul-2007 |
liamjfoy | Pull up following revision(s) (requested by plunky in ticket #744):
sys/netbt/l2cap_lower.c: revision 1.6
sys/dev/bluetooth/btdev.h: revision 1.6
sys/netbt/sco_socket.c: revision 1.9
sys/netbt/rfcomm_upper.c: revision 1.3
sys/netbt/l2cap_socket.c: revision 1.7
sys/netbt/rfcomm_upper.c: revision 1.5
lib/libusbhid/usbhid.h: revision 1.5
sys/netbt/rfcomm_upper.c: revision 1.6
usr.sbin/btdevctl/btdevctl.c: revision 1.4
usr.sbin/btdevctl/btdevctl.h: revision 1.3
usr.sbin/btdevctl/btdevctl.8: revision 1.4
sys/netbt/rfcomm_session.c: revision 1.5
sys/netbt/hci.h: revision 1.10
usr.bin/rfcomm_sppd/rfcomm_sppd.c: revision 1.6
sys/netbt/hci_link.c: revision 1.11
usr.bin/rfcomm_sppd/rfcomm_sppd.c: revision 1.7
usr.bin/rfcomm_sppd/rfcomm_sppd.c: revision 1.8
sys/dev/bluetooth/btsco.c: revision 1.14
sys/netbt/rfcomm_session.c: revision 1.9
usr.sbin/btdevctl/sdp.c: revision 1.2
share/man/man9/bluetooth.9: revision 1.2
usr.sbin/btdevctl/sdp.c: revision 1.3
sys/dev/bluetooth/bthidev.c: revision 1.8
sys/netbt/l2cap.h: revision 1.4
sys/netbt/rfcomm.h: revision 1.3
sys/netbt/l2cap.h: revision 1.5
sys/netbt/l2cap_misc.c: revision 1.3
share/man/man4/bluetooth.4: revision 1.5
lib/libusbhid/usbhid.3: revision 1.11
sys/netbt/bluetooth.h: revision 1.5
share/man/man4/bthidev.4: revision 1.8
sys/netbt/rfcomm_dlc.c: revision 1.3
usr.sbin/btdevctl/print.c: revision 1.8
sys/netbt/rfcomm_socket.c: revision 1.7
sys/netbt/l2cap_signal.c: revision 1.4
sys/netbt/l2cap_signal.c: revision 1.5
sys/netbt/l2cap_signal.c: revision 1.7
sys/netbt/hci_event.c: revision 1.6
usr.bin/rfcomm_sppd/rfcomm_sppd.1: revision 1.5
sys/netbt/l2cap_upper.c: revision 1.3
sys/netbt/l2cap_lower.c: revision 1.2
usr.sbin/btdevctl/db.c: revision 1.3
sys/netbt/l2cap_upper.c: revision 1.6
lib/libusbhid/descr.c: revision 1.5
sys/netbt/l2cap_upper.c: revision 1.7
sys/netbt/l2cap_lower.c: revision 1.4
Add 'service level' security for L2CAP and RFCOMM connections, following
the Linux (BlueZ) API.
- L2CAP or RFCOMM connections can require the baseband radio link
mode be any of:
authenticated (devices are paired)
encrypted (implies authentication)
secured (encryption, plus generate new link key)
- for sockets, the mode is set using setsockopt(2) and the socket
connection will be aborted if the mode change fails.
- mode settings will be applied during connection establishment, and
for safety, we enter a wait state and will only proceed when the mode
settings are successfuly set.
- It is possible to change the mode on already open connections, but
not possible to guarantee that data already queued (from either end)
will not be delivered. (this is a feature, not a bug)
- bthidev(4) and rfcomm_sppd(1) support "auth", "encrypt" and
"secure" options
- btdevctl(8) by default enables "auth" for HIDs, and "encrypt" for
keyboards (which are required to support it)
- ALSO INCLUDES OTHER MINOR FIXES
|
| 1.3.12.2 |
| 21-Nov-2007 |
bouyer | Sync with HEAD
|
| 1.3.12.1 |
| 13-Nov-2007 |
bouyer | Sync with HEAD
|
| 1.3.8.2 |
| 09-Jan-2008 |
matt | sync with HEAD
|
| 1.3.8.1 |
| 06-Nov-2007 |
matt | sync with HEAD
|
| 1.3.6.2 |
| 21-Nov-2007 |
joerg | Sync with HEAD.
|
| 1.3.6.1 |
| 04-Nov-2007 |
jmcneill | Sync with HEAD.
|
| 1.5.2.1 |
| 08-Dec-2007 |
mjf | Sync with HEAD.
|
| 1.6.24.1 |
| 19-Oct-2008 |
haad | Sync with HEAD.
|
| 1.6.20.2 |
| 24-Sep-2008 |
wrstuden | Merge in changes between wrstuden-revivesa-base-2 and
wrstuden-revivesa-base-3.
|
| 1.6.20.1 |
| 18-Sep-2008 |
wrstuden | Sync with wrstuden-revivesa-base-2.
|
| 1.6.18.2 |
| 16-Sep-2009 |
yamt | sync with head
|
| 1.6.18.1 |
| 04-May-2009 |
yamt | sync with head.
|
| 1.6.14.1 |
| 28-Sep-2008 |
mjf | Sync with HEAD.
|
| 1.9.36.1 |
| 10-Aug-2014 |
tls | Rebase.
|
| 1.9.26.1 |
| 28-Aug-2013 |
rmind | Checkpoint work in progress:
- Initial split of the protocol user-request method into the following
methods: pr_attach, pr_detach and pr_generic for old the pr_usrreq.
- Adjust socreate(9) and sonewconn(9) to call pr_attach without the
socket lock held (as a preparation for the locking scheme adjustment).
- Adjust all pr_attach routines to assert that PCB is not set.
- Sprinkle various comments, document some routines and their locking.
- Remove M_PCB, replace with kmem(9).
- Fix few bugs spotted on the way.
|
| 1.9.22.1 |
| 20-Aug-2014 |
tls | Rebase to HEAD as of a few days ago.
|
