merge xf86-input-elographics 1.4.3, xf86-video-ast 1.1.6,
xf86-video-r128 6.12.1, and xf86-video-vesa 2.6.0.

initial import of xf86-video-r128-6.12.1

- don't try to access a nonexistant video BIOS
- don't blindly assume VGA output
- on mobility chips assume LVDS and VGA outputs if no other info is available
Now this works again on my Pismo

fix merge botch -- at least compiles now.

merge mga 2.0.0 and r128 6.12.0 drivers.

initial import of xf86-video-r128-6.12.0

Avoid Undefined Behavior in r128_reg.h

Specify symbols without altering signed bit.

Requested by GCC when building with Undefined Behavior Sanitizer.

merge xf86-video-chips 1.2.7, xf86-video-glint 1.2.9, xf86-video-mga 1.6.5,
and xf86-video-r128 6.10.2.

initial import of xf86-video-r128-6.10.2

- implement UploadToScreen() using host blits
- implement DownloadFromScreen() with memcpy() but sync the engine first
- call exaMarkSync() when needed
- don't set EXA_OFFSCREEN_ALIGN_POT unless we actually do xrender acceleration

remove xorg-server.h from all the places we added it recently, as this
problem is now fixed more generally and globally.

include xorg-server.h which is normally included by config.h.

(as an unmaintained version, this change doubly isn't a candidate
for upstream.)

include xf86Privstr.h and switch screenFd to consoleFd.

merge xf86-video-r128 6.10.1

initial import of xf86-video-r128-6.10.1

restore some more registers on exit, now we actually get back to a usable
console

- make sure the wsdisplay we talk to is actually the one handling the chip
we're about to use
- make sure we habe backlight control via wsdisplay before attempting to use it
- use wsdisplay backlight control for blanking if available

port static EDID support via WSDISPLAYIO_GET_EDID back, now this works again
on my pismo

merge this at least so it builds.

attempt to merge r128 driver.

initial import of xf86-video-r128-6.10.0

sprintf -> snprintf

don't forget to NULL terminate the mode list when adding a single mode from
EDID. Now this works again on my Pismo.

merge xf86-video-ast 0.98.0, xf86-video-mga 1.6.3, xf86-video-neomagic
1.2.8, xf86-video-r128 6.9.2, and xf86-video-savage 2.3.7.

initial import of xf86-video-r128-6.9.2

merge xf86-video-mach64 6.9.4, xf86-video-mga 1.6.2, xf86-video-nv 2.1.20,
and xf86-video-r128 6.9.1.

initial import of xf86-video-r128-6.9.1

Rage 128 M3 can have DFP output

use ioctl(WSDISPLAYIO_GET_EDID)

Add headers for missing prototypes and missing prototypes

if we can't read panel resolution from BIOS - for example if there is none -
get the display resolution from wsdisplay instead
With this we no longer need to specify PanelWidth and PanelHeight in xorg.conf

Make saving/restoring video modes work on my PowerBook.
The problem was, that the driver blindly assumed that everyone uses PLL3 for
everything which isn't true at least on my PowerBook, which uses PLL0. So now
we actually restore which PLL to use and save PLL0 as well.

sprinkle #if(n)def to allow building the driver without any fbdev support
whatsoever
while there do what the comment suggests and fall through to turning off
the backlight in all DPMS modes except on - leaving the backlight on while
turning the DAC off is kind of useless, isn't it?

initial import of xf86-video-r128-6.8.1

initial import of xf86-video-r128-6.8.0