Lines Matching refs:You
138 You will need to provide some information about your disk's geometry.
146 make absolutely certain you subtract 1 from the total number of cylinders,
152 partition 'c' and correct the geometry, and again so that you may correctly
238 echo "The disklabel editor will now start. During this phase, you"
241 echo "the partition map at this time. You will have the opportunity"
257 Now that you have corrected the geometry of your disk, you may edit the
259 (filesystem block size), and cpg (cylinders per group) values. If you
396 FATAL ERROR: There is no disklabel present on the root disk! You must
406 FATAL ERROR: The disklabel on the root disk is corrupted! You must
420 You have already placed a disklabel onto the target root disk.
422 you may want to edit that label to change partition type information.
423 You will be given the opporunity to do that now. Note that you may
427 echo -n "Do you wish to edit the root disklabel? [y] "
441 You will now be given the opportunity to place disklabels on any additional
461 It has minimal facilities enabled. The first thing you should do after
481 This program is designed to help you install NetBSD on your system in a
482 simple and rational way. You'll be asked several questions, and it would
486 In particular, you will need to know some reasonably detailed
489 If you have SCSI disks, however, prior knowledge of disk geometry
491 information for SCSI disks during boot, if possible. If you did not
492 make it note of it before, you may wish to reboot and jot down your
496 program can cause SIGNIFICANT data loss, and you are advised
501 You can hit Control-C at any time to quit, but if you do so at a
502 prompt, you may have to hit return. Also, quitting in the middle of
521 CONGRATULATIONS! You have successfully installed NetBSD! To boot the
524 you boot from the root disk.
Indexes created Thu Oct 30 16:09:53 GMT 2025