Cross Reference: /src/distrib/mvme68k/miniroot/install.md

Lines Matching defs:the
12 # modification, are permitted provided that the following conditions
14 # 1. Redistributions of source code must retain the above copyright
15 #    notice, this list of conditions and the following disclaimer.
16 # 2. Redistributions in binary form must reproduce the above copyright
17 #    notice, this list of conditions and the following disclaimer in the
18 #    documentation and/or other materials provided with the distribution.
52 	# Just remount the root device read-write.
76 	# return an expression describing the valid partition id's
81 	# install the boot block on disk $1
102 	# $1 is the disk to check
126 		echo -n "Do you wish to edit the disklabel on $_disk? [y]"
130 		echo -n "Do you want to create one with the disklabel editor? [y]"
134 		echo -n "Do you want to try and repair the damage using the disklabel editor? [y]"
147 Here is an example of what the partition information will look like once
148 you have entered the disklabel editor. Disk partition sizes and offsets
150 pairs are on cylinder boundaries (the number of sector per cylinder is
151 given in the 'sectors/cylinder' entry, which is not shown here).
153 Do not change any parameters except the partition layout and the label name.
154 It's probably also wisest not to touch the '8 partitions:' line, even
179 	echo	"Welcome to the NetBSD/${MACHINE} ${RELEASE} installation program."
184 useful to have your disk's hardware manual, the installation notes, and a
195 is backed up before beginning the installation process.
197 Default answers are displayed in brackets after the questions. You can hit
199 hit return.  Also, quitting in the middle of installation may leave your
207 OK, then.  Enter 'halt' at the prompt to halt the machine.  Once the
208 machine has halted, power-cycle the system to load new boot code.
216 CONGRATULATIONS!  You have successfully installed NetBSD!  To boot the
217 installed system, enter halt at the command prompt.  Once the system has
218 halted, power-cycle the machine in order to load new boot code.  Make sure
219 you boot from the root disk.