Home | History | Annotate | Download | only in hostapd

Lines Matching refs:hostapd

0 ##### hostapd configuration file ##############################################
11 # configuration parameter, bridge, may be used to notify hostapd if the
18 # added to the bridge automatically (brctl may refuse to do this before hostapd
25 # Use driver=none if building hostapd as a standalone RADIUS server that does
32 # hostapd event logger configuration
58 # Interface for separate control program. If this is specified, hostapd
62 # multiple hostapd processes/interfaces can be run at the same time if more
64 # /var/run/hostapd is the recommended directory for sockets and by default,
65 # hostapd_cli will use it when trying to connect with hostapd.
66 ctrl_interface=/var/run/hostapd
70 # possible to run hostapd as root (since it needs to change network
74 # cases. By default, hostapd is configured to use gid 0 (root). If you
159 # Please note that some drivers do not use this value from hostapd and the
168 # This option allows hostapd to specify the operating class of the channel
200 # Channel list restriction. This option allows hostapd to select one of the
208 # Frequency list restriction. This option allows hostapd to select one of the
257 # If this field is not included in hostapd.conf, hostapd will not control
262 # If this field is not included in hostapd.conf, hostapd will not control
315 # hostapd to take care of management frame processing and as such, this can be
325 #accept_mac_file=/etc/hostapd.accept
326 #deny_mac_file=/etc/hostapd.deny
328 # IEEE 802.11 specifies two authentication algorithms. hostapd can be
443 # Enable this flag if U-APSD supported outside hostapd (eg., Firmware/driver)
584 # This field can be used to configure hostapd to add a fixed BSS Load element
641 #	on overlapping BSSes. These changes are done automatically when hostapd
1076 # 0 = auto-detect by hostapd
1111 # hostapd is implemented based on IEEE Std 802.1X-2004 which defines EAPOL
1114 # In order to make hostapd interoperate with these clients, the version number
1216 # In this mode, instances of hostapd can act as MACsec peers. The peer
1225 # Optionally, hostapd can be configured to use an integrated EAP server
1231 # server. This is also needed if hostapd is configured to act as a RADIUS
1238 #eap_user_file=/etc/hostapd.eap_user
1241 #ca_cert=/etc/hostapd.ca.pem
1244 #server_cert=/etc/hostapd.server.pem
1251 #private_key=/etc/hostapd.server.prv
1268 #server_cert2=/etc/hostapd.server-ecc.pem
1269 #private_key2=/etc/hostapd.server-ecc.prv
1275 # use this value. If not set, "hostapd" is used as a default.
1279 # Note: hostapd does not yet support CRL downloading based on CDP. Thus, a
1282 # concatenating these into one file. Whenever CRL changes, hostapd needs to be
1310 # This option allows hostapd to match every individual field in the right order
1316 # client certificate C=US/O=XX/OU=XYZ/OU=ABC/CN=1234), hostapd will reject the
1326 # (C=US/O=XX/OU=Production Factory). In this case, hostapd will allow both
1373 #	-CAfile /etc/hostapd.ca.pem \
1374 #	-issuer /etc/hostapd.ca.pem \
1375 #	-cert /etc/hostapd.server.pem \
1393 # "openssl dhparam -out /etc/hostapd.dh.pem 2048"
1394 #dh_file=/etc/hostapd.dh.pem
1402 # on cipher suite configuration. This is applicable only if hostapd is built to
1413 # P-521:P-384:P-256). This is applicable only if hostapd is built to use
1430 # prefix. If hostapd is built with SQLite support (CONFIG_SQLITE=y in .config),
1433 #eap_sim_db=unix:/tmp/hlr_auc_gw.sock db=/tmp/hostapd.db
1555 # to the NAS within the scope of the RADIUS server. Please note that hostapd
1624 # hostapd requires Message-Authenticator attribute to be included in all cases
1636 # If this is set (larger than 0) and acct_server is configured, hostapd will
1639 # value should not be configured in hostapd.conf, if RADIUS server is used to
1646 # This parameter can be used to configure hostapd to request CUI from the
1684 #vlan_file=/etc/hostapd.vlan
1687 # used to determine which VLAN a station is on.  hostapd creates a bridge for
1688 # each VLAN.  Then hostapd adds a VLAN interface (associated with the interface
1699 # When hostapd creates a VLAN interface on vlan_tagged_interfaces, it needs
1709 # of the attributes added automatically by hostapd.
1773 # hostapd can be used as a RADIUS authentication server for other hosts. This
1779 #radius_server_clients=/etc/hostapd.radius_clients
1835 #wpa_psk_file=/etc/hostapd.wpa_psk
1939 # To avoid such issues hostapd can replace those PTK rekeys (including EAP
2037 # used. If hostapd SME is used, this will be enabled just based on this
2067 # and BSSes (i.e., all configurations within a single hostapd process).
2111 #sae_password_file=/tc/hostapd.sae_passwords
2205 # reference to a BSS operated by this hostapd process.
2209 # If configured, hostapd will act as a DHCP relay for all FILS HLP requests
2211 # server for processing. hostapd will then wait for a response from that server
2226 # If set to 1, this enables hostapd to act as a DHCP rapid commit proxy to
2437 # interface controlled by the same hostapd process to restrict Probe Request
2451 # interface controlled by the same hostapd process to reject authentication
2469 # By default, a single hostapd process applies WPS operations to all configured
2495 # sent to hostapd ctrl_iface monitor. In addition, they can be written to a
2558 # If not set, hostapd will not allow external WPS Registrars to control the
2578 #extra_cred=hostapd.cred
2589 # wps_cred_processing=1 will disabled automatic updates of hostapd.conf file
2604 # By default, hostapd generates the AP Settings Attributes for M7 based on the
2609 #ap_settings=hostapd.ap_settings
3136 # option CONFIG_FST is set while compiling hostapd. They allow this interface
3178 # Actual functionality is managed outside hostapd.
3183 # Actual functionality is managed outside hostapd.
3214 # Per-BSS airtime weight. In multi-BSS mode, set for each BSS and hostapd will
3247 # option CONFIG_TESTING_OPTIONS is set while compiling hostapd. They allow
3250 # Ignore probe requests sent to hostapd with the given probability, must be a
3288 # hostapd will generate BSSID mask based on the BSSIDs that are
3289 # configured. hostapd will verify that dev_addr & MASK == dev_addr. If this is
3291 # hostapd (ifconfig wlan0 hw ether <MAC addr>). If a BSSID is configured for
3292 # every secondary BSS, this limitation is not applied at hostapd and other
3304 # hostapd to use the driver auto-generated interface address (e.g., to use the
3312 # Please note that hostapd uses some of the values configured for the first BSS
3360 #ctrl_interface=/var/run/hostapd
3373 #ctrl_interface=/var/run/hostapd