Lines Matching refs:scsi
34 * scsictl(8) - a program to manipulate SCSI devices and busses.
76 static struct scsi_addr dvaddr; /* SCSI device's address */
203 fprintf(stderr, " Commands pertaining to scsi devices:\n");
207 fprintf(stderr, " Commands pertaining to scsi busses:\n");
332 dvname, dvaddr.addr.scsi.scbus, dvaddr.addr.scsi.target,
333 dvaddr.addr.scsi.lun, msg);
506 * Get the DISK FORMAT mode page. SCSI-2 recommends specifying the
612 fprintf(stderr, "%s: SCSI command timed out",
655 "scsi",
713 * Display the identity of the device, including its SCSI bus,
766 dvname, dvaddr.addr.scsi.scbus, dvaddr.addr.scsi.target,
767 dvaddr.addr.scsi.lun, vendor, product, revision);
886 * Issue a RELEASE command to a SCSI device.
912 * Issue a RESERVE command to a SCSI device.
938 * Issue a reset to a SCSI device.
957 * Set debug level to a SCSI device.
979 * Get the caching parameters for a SCSI disk.
1012 * Set cache enables for a SCSI disk.
1068 * Issue a FLUSH CACHE command to a SCSI device.
1216 * Get the automatic reallocation parameters for a SCSI disk.
1250 * Set the automatic reallocation parameters for a SCSI disk.
1303 * Issue a prevent to a SCSI device.
1327 * Issue a stop to a SCSI device.
1351 * Issue a start to a SCSI device.
1375 * Issue a stop to a SCSI device.
1399 * Issue a TEST UNIT READY to a SCSI device.
1426 * Issue a reset to a SCSI bus.
1445 * Rescan a SCSI bus for new devices.
1482 * detach SCSI devices from a bus.
Indexes created Sun Feb 15 12:34:49 CET 2026