Lines Matching refs:MOVE
1171 # For UNNORM/DENORM opclass 3, the actual move out to memory is #
1508 # Separate packed move outs from the UNNORM and DENORM move outs.
1641 # The fp move out that took the "Unimplemented Data Type" exception was
2177 # the only exception possible on packed move out are INEX, OPERR, and SNAN.
2196 # the strategy is to move the exception frame "down" 12 bytes. then, we
2236 # the strategy is to move the exception frame "down" 12 bytes. then, we
2276 # the strategy is to move the exception frame "down" 12 bytes. then, we
2986 cmpi.b %d1,&0x7 # move all regs?
3011 mov.w 0xc(%sp),0x4(%sp) # move SR
3012 mov.l 0xe(%sp),0x6(%sp) # move Current PC
3015 mov.l 0x6(%sp),0x10(%sp) # move Current PC
3106 # This code must emulate the move out before finally exiting through #
3107 # _real_inex(). The move out, if to memory, is performed using #
3296 # This code must emulate the move out before finally exiting through #
3297 # _real_snan(). The move out, if to memory, is performed using #
3598 # This code must emulate the move out by calling fout() before finally #
3887 mov.l %d0, %a0 # move # bytes to %a0
4251 # so that the move can occur outside of this routine. This special #
4264 # @ = (0): move listed regs from memory to the FPU #
4265 # (1): move listed regs from the FPU to memory #
4298 # separate move ins from move outs...
4299 btst &0x5,EXC_EXTWORD(%a6) # is it a move in or out?
4300 beq.w fmovm_data_in # it's a move out
4303 # MOVE OUT: #
4330 mov.l %a0,%a1 # move <ea> to a1
4408 # MOVE IN: #
4583 mov.l %d0,%a0 # move # bytes to a0
6020 mov.l %d1, %d0 # move new G,R,S to %d0
6024 mov.l %d1, %d0 # move new G,R,S to %d0
7061 # fout(): move from fp register to memory or data register #
7088 # opclass three move of an operand out to memory. #
7104 # If at any time an access error is flagged by one of the move- #
7142 fmov.b %fp0,%d0 # exec move out w/ correct rnd mode
7188 fmov.w %fp0,%d0 # exec move out w/ correct rnd mode
7234 fmov.l %fp0,%d0 # exec move out w/ correct rnd mode
7350 # operand is a normalized number. first, we check to see if the move out
7353 # execute the move.
7504 # move out MAY overflow:
7506 # (2) do a move w/ appropriate rnd mode
7588 # operand is a normalized number. first, we check to see if the move out
7591 # execute the move.
7715 # move out MAY overflow:
7717 # (2) do a move w/ appropriate rnd mode
8146 fmovm.x &0x80,FP_SCR0(%a6) # move result to stack
8511 # FP MOVE IN: NORMs and DENORMs ONLY!
8584 cmpi.l %d0,&0x3fff-0x3f80 # will move in underflow?
8586 cmpi.l %d0,&0x3fff-0x407e # will move in overflow?
8597 fmov.x FP_SCR0(%a6),%fp0 # perform move
8627 cmpi.l %d0,&0x3fff-0x3c00 # will move in underflow?
8629 cmpi.l %d0,&0x3fff-0x43fe # will move in overflow?
8687 fmov.x FP_SCR0(%a6),%fp0 # perform move
8735 # the move in MAY overflow. so...
8741 fmov.x FP_SCR0(%a6),%fp0 # perform the move
8959 fmovm.x &0x80,FP_SCR0(%a6) # move result to stack
9364 cmpi.l %d0,&0x3fff-0x3f80 # will move in underflow?
9366 cmpi.l %d0,&0x3fff-0x407e # will move in overflow?
9407 cmpi.l %d0,&0x3fff-0x3c00 # will move in underflow?
9409 cmpi.l %d0,&0x3fff-0x43fe # will move in overflow?
9515 # the move in MAY underflow. so...
9982 cmpi.l %d0,&0x3fff-0x3f80 # will move in underflow?
9984 cmpi.l %d0,&0x3fff-0x407e # will move in overflow?
10025 cmpi.l %d0,&0x3fff-0x3c00 # will move in underflow?
10027 cmpi.l %d0,&0x3fff-0x43fe # will move in overflow?
10130 # the move in MAY underflow. so...
10494 fmovm.x &0x80,FP_SCR0(%a6) # move result to stack
10847 fmovm.x &0x80,FP_SCR0(%a6) # move result to stack
12044 cmpi.l %d0,&0x3fff-0x3f81 # will move in underflow?
12047 cmpi.l %d0,&0x3fff-0x407f # will move in overflow?
12089 cmpi.l %d0,&0x3fff-0x3c01 # will move in underflow?
12092 cmpi.l %d0,&0x3fff-0x43ff # will move in overflow?
12212 # the move in MAY underflow. so...
13594 mov.l %d0,%d7 # move k-factor to d7
13629 mov.l (%a0),FP_SCR1(%a6) # move input to work space
13630 mov.l 4(%a0),FP_SCR1+4(%a6) # move input to work space
13631 mov.l 8(%a0),FP_SCR1+8(%a6) # move input to work space
13665 mov.w FP_SCR1(%a6),%d0 # move exp to d0
13674 bra.b A4_str # go move out ILOG
13983 fmov.x %fp0,FP_SCR1(%a6) # move Y to memory
14033 fmov.x %fp0,(%a0) # move Y to memory at FP_SCR1(a6)
14207 fmov.x %fp0,(%a0) # move abs(YINT)/10^LEN to memory
14208 mov.l 4(%a0),%d2 # move 2nd word of FP_RES to d2
14209 mov.l 8(%a0),%d3 # move 3rd word of FP_RES to d3
14212 mov.l (%a0),%d0 # move exponent to d0
14303 mov.l 4(%a2),%d2 # move word 2 to d2
14304 mov.l 8(%a2),%d3 # move word 3 to d3
14305 mov.w (%a2),%d0 # move exp to d0
14360 mov.l &2,%d0 # move 2 in to d0 for SM
14543 lsl.w &4,%d7 # move it to upper 4 bits
14741 cmpi.b EXC_VOFF(%a6),&0x30 # move in or out?
Indexes created Mon Oct 27 17:09:47 GMT 2025