Lines Matching refs:mpt_prt
173 mpt_prt(mpt, "Device not running");
201 mpt_prt(mpt, "soft reset");
206 mpt_prt(mpt, "soft reset failed: device not running");
215 mpt_prt(mpt, "soft reset failed: doorbell wedged");
223 mpt_prt(mpt, "soft reset failed: ack timeout");
229 mpt_prt(mpt, "soft reset failed: device did not start running");
243 mpt_prt(mpt, "hard reset");
282 mpt_prt(mpt, "failed to reset device");
330 mpt_prt(mpt, "Send Request %d (%#" PRIxBUSADDR "):",
332 mpt_prt(mpt, "%08x %08x %08x %08x",
334 mpt_prt(mpt, "%08x %08x %08x %08x",
336 mpt_prt(mpt, "%08x %08x %08x %08x",
338 mpt_prt(mpt, "%08x %08x %08x %08x",
381 mpt_prt(mpt, "handshake aborted due to invalid doorbell state");
404 mpt_prt(mpt, "mpt_send_handshake_cmd timeout1");
412 mpt_prt(mpt, "mpt_send_handshake_cmd timeout2");
420 mpt_prt(mpt,
444 mpt_prt(mpt, "mpt_recv_handshake_cmd timeout1");
453 mpt_prt(mpt, "mpt_recv_handshake_cmd timeout2");
462 mpt_prt(mpt, "reply length does not match message length: "
474 mpt_prt(mpt, "mpt_recv_handshake_cmd timeout3");
487 mpt_prt(mpt, "mpt_recv_handshake_cmd timeout4");
599 mpt_prt(mpt, "read_cfg_header timed out");
606 mpt_prt(mpt, "mpt_read_cfg_header: Config Info Status %x",
656 mpt_prt(mpt, "read_cfg_page timed out");
663 mpt_prt(mpt, "mpt_read_cfg_page: Config Info Status %x",
712 mpt_prt(mpt, "page type 0x%x not changeable",
762 mpt_prt(mpt, "mpt_write_cfg_page timed out");
769 mpt_prt(mpt, "mpt_write_cfg_page: Config Info Status %x",
794 mpt_prt(mpt, "SPI Port Page 0 Header: %x %x %x %x",
807 mpt_prt(mpt, "SPI Port Page 1 Header: %x %x %x %x",
821 mpt_prt(mpt, "SPI Port Page 2 Header: %x %x %x %x",
835 mpt_prt(mpt,
849 mpt_prt(mpt,
867 mpt_prt(mpt, "failed to read SPI Port Page 0");
869 mpt_prt(mpt,
878 mpt_prt(mpt, "failed to read SPI Port Page 1");
880 mpt_prt(mpt,
889 mpt_prt(mpt, "failed to read SPI Port Page 2");
891 mpt_prt(mpt,
896 mpt_prt(mpt,
908 mpt_prt(mpt, "cannot read SPI Tgt %d Device Page 0", i);
912 mpt_prt(mpt,
920 mpt_prt(mpt, "cannot read SPI Tgt %d Device Page 1", i);
924 mpt_prt(mpt,
949 mpt_prt(mpt,
963 mpt_prt(mpt,
978 mpt_prt(mpt,
992 mpt_prt(mpt,
1022 mpt_prt(mpt, "enabling port %d", port);
1031 mpt_prt(mpt, "port enable timed out");
1062 mpt_prt(mpt, "%sabling async events", onoff? "en" : "dis");
1143 mpt_prt(mpt, "doorbell req = %s",
1161 mpt_prt(mpt, "mpt_get_iocfacts failed");
1167 mpt_prt(mpt,
1177 mpt_prt(mpt, "mpt_get_portfacts failed");
1183 mpt_prt(mpt,
1190 mpt_prt(mpt, "initiator role unsupported");
1208 mpt_prt(mpt, "Unsupported Port Type (%x)",
1220 mpt_prt(mpt, "mpt_send_ioc_init failed");
1225 mpt_prt(mpt, "mpt_send_ioc_init ok");
1229 mpt_prt(mpt, "IOC failed to go to run state");
1233 mpt_prt(mpt, "IOC now at RUNSTATE");
1273 mpt_prt(mpt, "failed to enable port 0");
1278 mpt_prt(mpt, "enabled port 0");
1286 mpt_prt(mpt, "failed to initialize IOC");
1291 mpt_prt(mpt, "enabling interrupts");
Indexes created Sun Oct 19 21:10:07 GMT 2025