Cross Reference: /src/sys/dev/pci/ixgbe/if

Lines Matching defs:log
568  * ixgbe_bp_log - Display the bypass log
590 	/* Keep the log display single-threaded */
591 	while (atomic_cas_uint(&sc->bypass.log, 0, 1) != 0)
596 	/* Find Current head of the log eeprom offset */
617 	/* address of the first log */
620 	/* extract all the log entries */
625 		/* Log 5 bytes store in on u32 and a u8 */
643 		/* Quit if not a unread log */
647 		 * Log looks good so store the address where it's
648 		 * Unread Log bit is so we can clear it after safely
649 		 * pulling out all of the log data.
718 	/* Another log command can now run */
719 	while (atomic_cas_uint(&sc->bypass.log, 1, 0) != 1)
726 	while (atomic_cas_uint(&sc->bypass.log, 1, 0) != 1)
742 	struct                 sysctllog **log;
765 	log = &sc->sysctllog;
772 	 * The log routine is kept separate from the other
774 	 * `sysctl dev.ix.0.bypass` will not show the log.
776 	sysctl_createv(log, 0, &rnode, &cnode, CTLFLAG_READWRITE,
777 	    CTLTYPE_INT, "bypass_log", SYSCTL_DESCR("Bypass Log"),
781 	sysctl_createv(log, 0, &rnode, &rnode, 0,
785 	sysctl_createv(log, 0, &rnode, &cnode, CTLFLAG_READONLY,
789 	sysctl_createv(log, 0, &rnode, &cnode, CTLFLAG_READWRITE,
793 	sysctl_createv(log, 0, &rnode, &cnode, CTLFLAG_READWRITE,
797 	sysctl_createv(log, 0, &rnode, &cnode, CTLFLAG_READWRITE,
801 	sysctl_createv(log, 0, &rnode, &cnode, CTLFLAG_READWRITE,
805 	sysctl_createv(log, 0, &rnode, &cnode, CTLFLAG_READWRITE,
809 	sysctl_createv(log, 0, &rnode, &cnode, CTLFLAG_READWRITE,
813 	sysctl_createv(log, 0, &rnode, &cnode, CTLFLAG_READWRITE,
817 	sysctl_createv(log, 0, &rnode, &cnode, CTLFLAG_READWRITE,
OpenGrok
