Home | History | Annotate | Download | only in scsipi

Lines Matching refs:x11

91 { 0x00, 0x11, "Audio Play Operation In Progress" },
130 { 0x04, 0x11, "Logical Unit Not Ready, Notify (Enable Spinup) Required" },
181 { 0x0B, 0x11, "Warning - Low Operating Humidity Limit Exceeded" },
199 { 0x0C, 0x11, "Write Error - Recovery Scan Needed" },
217 { 0x11, 0x00, "Unrecovered Read Error" },
218 { 0x11, 0x01, "Read Retries Exhausted" },
219 { 0x11, 0x02, "Error Too Long To Correct" },
220 { 0x11, 0x03, "Multiple Read Errors" },
221 { 0x11, 0x04, "Unrecovered Read Error - Auto Reallocate Failed" },
222 { 0x11, 0x05, "L-EC Uncorrectable Error" },
223 { 0x11, 0x06, "CIRC Unrecovered Error" },
224 { 0x11, 0x07, "Data Re-synchronization Error" },
225 { 0x11, 0x08, "Incomplete Block Read" },
226 { 0x11, 0x09, "No Gap Found" },
227 { 0x11, 0x0A, "Miscorrected Error" },
228 { 0x11, 0x0B, "Unrecovered Read Error - Recommend Reassignment" },
229 { 0x11, 0x0C, "Unrecovered Read Error - Recommend Rewrite The Data" },
230 { 0x11, 0x0D, "De-Compression CRC Error" },
231 { 0x11, 0x0E, "Cannot Decompress Using Declared Algorithm" },
232 { 0x11, 0x0F, "Error Reading UPC/EAN Number" },
233 { 0x11, 0x10, "Error Reading ISRC Number" },
234 { 0x11, 0x11, "Read Error - Loss Of Streaming" },
235 { 0x11, 0x12, "Auxiliary Memory Read Error" },
236 { 0x11, 0x13, "Read Error - Failed Retransmission Request" },
237 { 0x11, 0x14, "Read Error - Lba Marked Bad By Application Client" },
238 { 0x11, 0x15, "Write After Sanitize Required" },
354 { 0x26, 0x11, "Incomplete Key-Associated Data Set" },
395 { 0x2A, 0x11, "Data Encryption Parameters Changed By Another I_t Nexus" },
419 { 0x2C, 0x11, "Descriptor Format Sense Data Required" },
443 { 0x30, 0x11, "Incompatible Volume Type" },
489 { 0x3B, 0x11, "Medium Magazine Not Accessible" },
524 { 0x3F, 0x11, "Medium Auxiliary Memory Accessible" },
572 { 0x4B, 0x11, "PCIe Poisoned Tlp Received" },
618 { 0x55, 0x11, "Insufficient Resources To Bind" },
638 { 0x5D, 0x11, "Hardware Impending Failure Drive Error Rate Too High" },
801 { 0x73, 0x11, "Current Power Calibration Area Is Full" },
818 { 0x74, 0x11, "SA Creation Parameter Value Rejected" },