Lines Matching refs:USHORT
87 USHORT usTMin; // The temperature, in 0.01 centigrades, below which we just run at a minimal PWM.
88 USHORT usTMed; // The middle temperature where we change slopes.
89 USHORT usTHigh; // The high point above TMed for adjusting the second slope.
90 USHORT usPWMMin; // The minimum PWM value in percent (0.01% increments).
91 USHORT usPWMMed; // The PWM value (in percent) at TMed.
92 USHORT usPWMHigh; // The PWM value at THigh.
98 USHORT usTMax; // The max temperature
105 USHORT usFanPWMMax;
106 USHORT usFanOutputSensitivity;
111 USHORT usSize;
115 USHORT usVCETableOffset; //points to ATOM_PPLIB_VCE_Table
116 USHORT usUVDTableOffset; //points to ATOM_PPLIB_UVD_Table
117 USHORT usSAMUTableOffset; //points to ATOM_PPLIB_SAMU_Table
118 USHORT usPPMTableOffset; //points to ATOM_PPLIB_PPM_Table
119 USHORT usACPTableOffset; //points to ATOM_PPLIB_ACP_Table
120 USHORT usPowerTuneTableOffset; //points to ATOM_PPLIB_POWERTUNE_Table
161 USHORT usStateArrayOffset;
165 USHORT usClockInfoArrayOffset;
168 USHORT usNonClockInfoArrayOffset;
170 USHORT usBackbiasTime; // in microseconds
171 USHORT usVoltageTime; // in microseconds
172 USHORT usTableSize; //the size of this structure, or the extended structure
178 USHORT usBootClockInfoOffset;
179 USHORT usBootNonClockInfoOffset;
187 USHORT usCustomThermalPolicyArrayOffset;
193 USHORT usFormatID; // To be used ONLY by PPGen.
194 USHORT usFanTableOffset;
195 USHORT usExtendendedHeaderOffset;
203 USHORT usVddcDependencyOnSCLKOffset;
204 USHORT usVddciDependencyOnMCLKOffset;
205 USHORT usVddcDependencyOnMCLKOffset;
206 USHORT usMaxClockVoltageOnDCOffset;
207 USHORT usVddcPhaseShedLimitsTableOffset; // Points to ATOM_PPLIB_PhaseSheddingLimits_Table
208 USHORT usMvddDependencyOnMCLKOffset;
217 USHORT usCACLeakageTableOffset; // Points to ATOM_PPLIB_CAC_Leakage_Table
219 USHORT usTDPODLimit;
220 USHORT usLoadLineSlope; // in milliOhms * 100
302 USHORT usClassification;
307 USHORT usClassification2;
318 USHORT usEngineClockLow;
321 USHORT usMemoryClockLow;
324 USHORT usVDDC;
325 USHORT usUnused1;
326 USHORT usUnused2;
343 USHORT usLowEngineClockLow; // Low Engine clock in MHz (the same way as on the R600).
345 USHORT usHighEngineClockLow; // High Engine clock in MHz.
347 USHORT usMemoryClockLow; // For now one of the ATOM_PPLIB_RS780_SPMCLK_XXXX constants.
350 USHORT usVDDC; // For the 780, use: None, Low, High, Variable
353 USHORT usHTLinkFreq; // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200).
372 USHORT usEngineClockLow;
375 USHORT usMemoryClockLow;
378 USHORT usVDDC;
379 USHORT usVDDCI;
380 USHORT usUnused;
388 USHORT usEngineClockLow;
391 USHORT usMemoryClockLow;
394 USHORT usVDDC;
395 USHORT usVDDCI;
405 USHORT usEngineClockLow;
408 USHORT usMemoryClockLow;
412 USHORT usPCIELane;
416 USHORT usEngineClockLow; //clockfrequency & 0xFFFF. The unit is in 10khz
419 USHORT tdpLimit;
421 USHORT rsv1;
470 USHORT usClockLow;
472 USHORT usVoltage;
483 USHORT usSclkLow;
485 USHORT usMclkLow;
487 USHORT usVddc;
488 USHORT usVddci;
501 USHORT usVddc; // We use this field for the "fake" standardized VDDC for power calculations; For CI and newer, we use this as the real VDDC value. in CI we read it as StdVoltageHiSidd
507 USHORT usVddc1;
508 USHORT usVddc2;
509 USHORT usVddc3;
523 USHORT usVoltage;
524 USHORT usSclkLow;
526 USHORT usMclkLow;
537 USHORT usEVClkLow;
539 USHORT usECClkLow;
550 USHORT usVoltage;
583 USHORT usVClkLow;
585 USHORT usDClkLow;
596 USHORT usVoltage;
615 USHORT usVoltage;
616 USHORT usSAMClockLow;
633 USHORT usVoltage;
634 USHORT usACPClockLow;
650 USHORT usTDP;
651 USHORT usConfigurableTDP;
652 USHORT usTDC;
653 USHORT usBatteryPowerLimit;
654 USHORT usSmallPowerLimit;
655 USHORT usLowCACLeakage;
656 USHORT usHighCACLeakage;
669 USHORT usMaximumPowerDeliveryLimit;
670 USHORT usReserve[7];
679 USHORT usCpuCoreNumber;
Indexes created Thu Nov 06 21:09:53 GMT 2025