Cross Reference: /xsrc/external/mit/xf86-input-elographics/dist/src/xf86Elo.c

Lines Matching refs:xf86Msg
651   xf86Msg(X_PROBED, "Elographics touchscreen is a ");
654     xf86Msg(X_NONE, "AccuTouch");
657     xf86Msg(X_NONE, "DuraTouch");
660     xf86Msg(X_NONE, "Intellitouch");
663   xf86Msg(X_NONE, ", connected through a ");
666     xf86Msg(X_NONE, "serial link.\n");
669     xf86Msg(X_NONE, "PC-Bus port.\n");
672     xf86Msg(X_NONE, "Micro Channel port.\n");
675   xf86Msg(X_PROBED, "The controller is a model ");
678       xf86Msg(X_NONE, "E281-2310");
681       xf86Msg(X_NONE, "E271-2210");
685     xf86Msg(X_NONE, "E271-2200");
687   xf86Msg(X_NONE, ", firmware revision %d.%d.\n", packet[6], packet[5]);
690     xf86Msg(X_PROBED, " Additional features:\n");
692       xf86Msg(X_PROBED, "	External A/D converter\n");
695       xf86Msg(X_PROBED, "	32Ko RAM\n");
698       xf86Msg(X_PROBED, "	RAM onboard\n");
701       xf86Msg(X_PROBED, "	Z axis active\n");
703     xf86Msg(X_NONE, "\n");
1027     xf86Msg(X_ERROR, "%s: No Device specified in Elographics module config.\n",
1033 	xf86Msg(X_ERROR, "%s: Unable to open Elographics touchscreen device %s", pInfo->name, str);
1056   xf86Msg(X_CONFIG, "Elographics associated screen: %d\n", priv->screen_no);
1058   xf86Msg(X_CONFIG, "Elographics untouch delay: %d ms\n", priv->untouch_delay*10);
1060   xf86Msg(X_CONFIG, "Elographics report delay: %d ms\n", priv->report_delay*10);
1062   xf86Msg(X_CONFIG, "Elographics maximum x position: %d\n", priv->max_x);
1064   xf86Msg(X_CONFIG, "Elographics minimum x position: %d\n", priv->min_x);
1066   xf86Msg(X_CONFIG, "Elographics maximum y position: %d\n", priv->max_y);
1068   xf86Msg(X_CONFIG, "Elographics minimum y position: %d\n", priv->min_y);
1071     xf86Msg(X_CONFIG, "Elographics device will work with X and Y axes swapped\n");
1074   xf86Msg(X_CONFIG, "Elographics no framing: %d\n", priv->no_framing);
1078     xf86Msg(X_CONFIG, "Elographics debug level sets to %d\n", debug_level);
1080     xf86Msg(X_INFO, "Elographics debug not available\n");
1091     xf86Msg(X_ERROR, "Elographics portrait mode should be: Portrait, Landscape or PortraitCCW");
1094   xf86Msg(X_CONFIG, "Elographics device will work in %s mode\n", str);
1099     xf86Msg(X_ERROR, "Elographics: Cannot configure touchscreen with width 0\n");
1103     xf86Msg(X_INFO, "Elographics: reverse x mode (minimum x position >= maximum x position)\n");
1106     xf86Msg(X_ERROR, "Elographics: Cannot configure touchscreen with height 0\n");
1110     xf86Msg(X_INFO, "Elographics: reverse y mode (minimum y position >= maximum y position)\n");