Home | History | Annotate | Line # | Download | only in include 
      1 /*	$NetBSD: icom.h,v 1.7 2020/05/25 20:47:19 christos Exp $	*/
      2 
      3 /*
      4  * Header file for ICOM radios
      5  */
      6 #include "ntp_types.h"
      7 
      8 /*
      9  * Common definitions
     10  */
     11 #define P_ERMSG	0x1		/* trace bus error messages */
     12 #define P_TRACE 0x2		/* trace CI-V messges */
     13 #define RETRY	3		/* max packet retries */
     14 #define IBAUD	B1200		/* autotune port speed */
     15 
     16 /*
     17  * Radio identifier codes
     18  */
     19 #define IC1271	0x24
     20 #define IC1275	0x18
     21 #define IC271	0x20
     22 #define IC275	0x10
     23 #define IC375	0x12
     24 #define IC471	0x22
     25 #define IC475	0x14
     26 #define IC575	0x16
     27 #define IC725	0x28
     28 #define IC726	0x30
     29 #define IC735	0x04
     30 #define IC751	0x1c
     31 #define IC761	0x1e
     32 #define IC765	0x2c
     33 #define IC775	0x46
     34 #define IC781	0x26
     35 #define IC970	0x2e
     36 #define R7000	0x08
     37 #define R71	0x1a
     38 #define R7100	0x34
     39 #define R72	0x32
     40 #define R8500	0x4a
     41 #define R9000	0x2a
     42 
     43 /*
     44  * CI-V frame codes
     45  */
     46 #define PR	0xfe		/* preamble */
     47 #define TX	0xe0		/* controller address */
     48 #define FI	0xfd		/* end of message */
     49 #define ACK	0xfb		/* controller normal reply */
     50 #define NAK	0xfa		/* controller error reply */
     51 #define PAD	0xff		/* transmit padding */
     52 
     53 /*
     54  * CI-V controller commands
     55  */
     56 #define V_FREQT	0x00		/* freq set (transceive) */
     57 #define V_MODET	0x01		/* set mode (transceive) */
     58 #define V_RBAND	0x02		/* read band edge */
     59 #define V_RFREQ	0x03		/* read frequency */
     60 #define V_RMODE	0x04		/* read mode */
     61 #define V_SFREQ	0x05		/* set frequency */
     62 #define V_SMODE	0x06		/* set mode */
     63 #define V_SVFO	0x07		/* select vfo */
     64 #define V_SMEM	0x08		/* select channel/bank */
     65 #define V_WRITE	0x09		/* write channel */
     66 #define V_VFOM	0x0a		/* memory -> vfo */
     67 #define V_CLEAR	0x0b		/* clear channel */
     68 #define V_ROFFS	0x0c		/* read tx offset */
     69 #define V_SOFFS	0x0d		/* write tx offset */
     70 #define V_SCAN	0x0e		/* scan control */
     71 #define V_SPLIT	0x0f		/* split control */
     72 #define V_DIAL	0x10		/* set dial tuning step */
     73 #define V_ATTEN	0x11		/* set attenuator */
     74 #define V_SANT	0x12		/* select antenna */
     75 #define V_ANNC	0x13		/* announce control */
     76 #define V_WRCTL	0x14		/* write controls */
     77 #define V_RDCTL	0x15		/* read controls */
     78 #define V_TOGL	0x16		/* set switches */
     79 #define V_ASCII	0x17		/* send CW message */
     80 #define V_POWER	0x18		/* power control */
     81 #define V_RDID	0x19		/* read model ID */
     82 #define V_SETW	0x1a		/* read/write channel/bank data */
     83 #define V_CTRL	0x7f		/* miscellaneous control */
     84 
     85 /*
     86  * Function prototypes
     87  */
     88 int	icom_init		(const char *, int, int);
     89 int	icom_freq		(int, int, double);
     90