Home | History | Annotate | Line # | Download | only in usb
      1 /*	$NetBSD: if_udavreg.h,v 1.17 2024/02/10 09:21:53 andvar Exp $	*/
      2 /*	$nabe: if_udavreg.h,v 1.2 2003/08/21 16:26:40 nabe Exp $	*/
      3 
      4 /*
      5  * Copyright (c) 2003
      6  *     Shingo WATANABE <nabe (at) nabechan.org>.  All rights reserved.
      7  *
      8  * Redistribution and use in source and binary forms, with or without
      9  * modification, are permitted provided that the following conditions
     10  * are met:
     11  * 1. Redistributions of source code must retain the above copyright
     12  *    notice, this list of conditions and the following disclaimer.
     13  * 2. Redistributions in binary form must reproduce the above copyright
     14  *    notice, this list of conditions and the following disclaimer in the
     15  *    documentation and/or other materials provided with the distribution.
     16  * 3. Neither the name of the author nor the names of any co-contributors
     17  *    may be used to endorse or promote products derived from this software
     18  *    without specific prior written permission.
     19  *
     20  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
     21  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     23  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
     24  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     25  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     26  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     27  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     28  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     29  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     30  * SUCH DAMAGE.
     31  *
     32  */
     33 
     34 #include <sys/rndsource.h>
     35 
     36 #define	UDAV_IFACE_INDEX	0
     37 #define	UDAV_CONFIG_NO		1
     38 
     39 #define	UDAV_TX_LIST_CNT	1
     40 #define	UDAV_RX_LIST_CNT	1
     41 
     42 #define	UDAV_TX_TIMEOUT		1000
     43 #define	UDAV_TIMEOUT		10000
     44 
     45 
     46 /* Packet length */
     47 #define	UDAV_MAX_MTU		1536 /* XXX: max frame size is unknown */
     48 #define	UDAV_MIN_FRAME_LEN	60
     49 #define	UDAV_BUFSZ		UDAV_MAX_MTU
     50 
     51 /* Request */
     52 #define	UDAV_REQ_REG_READ	0x00 /* Read from register(s) */
     53 #define	UDAV_REQ_REG_WRITE	0x01 /* Write to register(s) */
     54 #define	UDAV_REQ_REG_WRITE1	0x03 /* Write to a register */
     55 
     56 #define	UDAV_REQ_MEM_READ	0x02 /* Read from memory */
     57 #define	UDAV_REQ_MEM_WRITE	0x05 /* Write to memory */
     58 #define	UDAV_REQ_MEM_WRITE1	0x07 /* Write a byte to memory */
     59 
     60 /* Registers */
     61 #define	UDAV_NCR		0x00 /* Network Control Register */
     62 #define	 UDAV_NCR_EXT_PHY	(1<<7) /* Select External PHY */
     63 #define	 UDAV_NCR_WAKEEN	(1<<6) /* Wakeup Event Enable */
     64 #define	 UDAV_NCR_FCOL		(1<<4) /* Force Collision Mode */
     65 #define	 UDAV_NCR_FDX		(1<<3) /* Full-Duplex Mode (RO on Int. PHY) */
     66 #define	 UDAV_NCR_LBK1		(1<<2) /* Loopback Mode */
     67 #define	 UDAV_NCR_LBK0		(1<<1) /* Loopback Mode */
     68 #define	 UDAV_NCR_RST		(1<<0) /* Software reset */
     69 
     70 #define	UDAV_RCR		0x05 /* RX Control Register */
     71 #define	 UDAV_RCR_WTDIS		(1<<6) /* Watchdog Timer Disable */
     72 #define	 UDAV_RCR_DIS_LONG	(1<<5) /* Discard Long Packet(over 1522Byte) */
     73 #define	 UDAV_RCR_DIS_CRC	(1<<4) /* Discard CRC Error Packet */
     74 #define	 UDAV_RCR_ALL		(1<<3) /* Pass All Multicast */
     75 #define	 UDAV_RCR_RUNT		(1<<2) /* Pass Runt Packet */
     76 #define	 UDAV_RCR_PRMSC		(1<<1) /* Promiscuous Mode */
     77 #define	 UDAV_RCR_RXEN		(1<<0) /* RX Enable */
     78 
     79 #define	UDAV_RSR		0x06 /* RX Status Register */
     80 #define	 UDAV_RSR_RF		(1<<7) /* Runt Frame */
     81 #define	 UDAV_RSR_MF		(1<<6) /* Multicast Frame */
     82 #define	 UDAV_RSR_LCS		(1<<5) /* Late Collision Seen */
     83 #define	 UDAV_RSR_RWTO		(1<<4) /* Receive Watchdog Time-Out */
     84 #define	 UDAV_RSR_PLE		(1<<3) /* Physical Layer Error */
     85 #define	 UDAV_RSR_AE		(1<<2) /* Alignment Error */
     86 #define	 UDAV_RSR_CE		(1<<1) /* CRC Error */
     87 #define	 UDAV_RSR_FOE		(1<<0) /* FIFO Overflow Error */
     88 #define	 UDAV_RSR_ERR		(UDAV_RSR_RF | UDAV_RSR_LCS | UDAV_RSR_RWTO |\
     89 				UDAV_RSR_PLE | UDAV_RSR_AE | UDAV_RSR_CE |\
     90 				UDAV_RSR_FOE)
     91 
     92 #define	UDAV_EPCR		0x0b /* EEPROM & PHY Control Register */
     93 #define	 UDAV_EPCR_REEP		(1<<5) /* Reload EEPROM */
     94 #define	 UDAV_EPCR_WEP		(1<<4) /* Write EEPROM enable */
     95 #define	 UDAV_EPCR_EPOS		(1<<3) /* EEPROM or PHY Operation Select */
     96 #define	 UDAV_EPCR_ERPRR	(1<<2) /* EEPROM/PHY Register Read Command */
     97 #define	 UDAV_EPCR_ERPRW	(1<<1) /* EEPROM/PHY Register Write Command */
     98 #define	 UDAV_EPCR_ERRE		(1<<0) /* EEPROM/PHY Access Status */
     99 
    100 #define	UDAV_EPAR		0x0c /* EEPROM & PHY Control Register */
    101 #define	 UDAV_EPAR_PHY_ADR1	(1<<7) /* PHY Address bit 1 */
    102 #define	 UDAV_EPAR_PHY_ADR0	(1<<6) /* PHY Address bit 0 */
    103 #define	 UDAV_EPAR_EROA		(1<<0) /* EEPROM Word/PHY Register Address */
    104 #define	 UDAV_EPAR_EROA_MASK	(0x1f) /* [5:0] */
    105 
    106 #define	UDAV_EPDRL		0x0d /* EEPROM & PHY Data Register */
    107 #define	UDAV_EPDRH		0x0e /* EEPROM & PHY Data Register */
    108 
    109 #define	UDAV_PAR0		0x10 /* Ethernet Address, load from EEPROM */
    110 #define	UDAV_PAR1		0x11 /* Ethernet Address, load from EEPROM */
    111 #define	UDAV_PAR2		0x12 /* Ethernet Address, load from EEPROM */
    112 #define	UDAV_PAR3		0x13 /* Ethernet Address, load from EEPROM */
    113 #define	UDAV_PAR4		0x14 /* Ethernet Address, load from EEPROM */
    114 #define	UDAV_PAR5		0x15 /* Ethernet Address, load from EEPROM */
    115 #define	UDAV_PAR		UDAV_PAR0
    116 
    117 #define	UDAV_MAR0		0x16 /* Multicast Register */
    118 #define	UDAV_MAR1		0x17 /* Multicast Register */
    119 #define	UDAV_MAR2		0x18 /* Multicast Register */
    120 #define	UDAV_MAR3		0x19 /* Multicast Register */
    121 #define	UDAV_MAR4		0x1a /* Multicast Register */
    122 #define	UDAV_MAR5		0x1b /* Multicast Register */
    123 #define	UDAV_MAR6		0x1c /* Multicast Register */
    124 #define	UDAV_MAR7		0x1d /* Multicast Register */
    125 #define	UDAV_MAR		UDAV_MAR0
    126 
    127 #define	UDAV_GPCR		0x1e /* General purpose control register */
    128 #define	 UDAV_GPCR_GEP_CNTL6	(1<<6) /* General purpose control 6 */
    129 #define	 UDAV_GPCR_GEP_CNTL5	(1<<5) /* General purpose control 5 */
    130 #define	 UDAV_GPCR_GEP_CNTL4	(1<<4) /* General purpose control 4 */
    131 #define	 UDAV_GPCR_GEP_CNTL3	(1<<3) /* General purpose control 3 */
    132 #define	 UDAV_GPCR_GEP_CNTL2	(1<<2) /* General purpose control 2 */
    133 #define	 UDAV_GPCR_GEP_CNTL1	(1<<1) /* General purpose control 1 */
    134 #define	 UDAV_GPCR_GEP_CNTL0	(1<<0) /* General purpose control 0 */
    135 
    136 #define	UDAV_GPR		0x1f /* General purpose register */
    137 #define	 UDAV_GPR_GEPIO6	(1<<6) /* General purpose 6 */
    138 #define	 UDAV_GPR_GEPIO5	(1<<5) /* General purpose 5 */
    139 #define	 UDAV_GPR_GEPIO4	(1<<4) /* General purpose 4 */
    140 #define	 UDAV_GPR_GEPIO3	(1<<3) /* General purpose 3 */
    141 #define	 UDAV_GPR_GEPIO2	(1<<2) /* General purpose 2 */
    142 #define	 UDAV_GPR_GEPIO1	(1<<1) /* General purpose 1 */
    143 #define	 UDAV_GPR_GEPIO0	(1<<0) /* General purpose 0 */
    144