1 /* $NetBSD: uatp.c,v 1.31 2022/03/28 12:45:04 riastradh Exp $ */ 2 3 /*- 4 * Copyright (c) 2011-2014 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Taylor R. Campbell. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * uatp(4) - USB Apple Trackpad 34 * 35 * The uatp driver talks the protocol of the USB trackpads found in 36 * Apple laptops since 2005, including PowerBooks, iBooks, MacBooks, 37 * and MacBook Pros. Some of these also present generic USB HID mice 38 * on another USB report id, which the ums(4) driver can handle, but 39 * Apple's protocol gives more detailed sensor data that lets us detect 40 * multiple fingers to emulate multi-button mice and scroll wheels. 41 */ 42 43 /* 44 * Protocol 45 * 46 * The device has a set of horizontal sensors, each being a column at a 47 * particular position on the x axis that tells you whether there is 48 * pressure anywhere on that column, and vertical sensors, each being a 49 * row at a particular position on the y axis that tells you whether 50 * there is pressure anywhere on that row. 51 * 52 * Whenever the device senses anything, it emits a readout of all of 53 * the sensors, in some model-dependent order. (For the order, see 54 * read_sample_1 and read_sample_2.) Each sensor datum is an unsigned 55 * eight-bit quantity representing some measure of pressure. (Of 56 * course, it really measures capacitance, not pressure, but we'll call 57 * it `pressure' here.) 58 */ 59 60 /* 61 * Interpretation 62 * 63 * To interpret the finger's position on the trackpad, the driver 64 * computes a weighted average over all possible positions, weighted by 65 * the pressure at that position. The weighted average is computed in 66 * the dimensions of the screen, rather than the trackpad, in order to 67 * admit a finer resolution of positions than the trackpad grid. 68 * 69 * To update the finger's position smoothly on the trackpad, the driver 70 * computes a weighted average of the old raw position, the old 71 * smoothed position, and the new smoothed position. The weights are 72 * given by the old_raw_weight, old_smoothed_weight, and new_raw_weight 73 * sysctl knobs. 74 * 75 * Finally, to move the cursor, the driver takes the difference between 76 * the old and new positions and accelerates it according to some 77 * heuristic knobs that need to be reworked. 78 * 79 * Finally, there are some bells & whistles to detect tapping and to 80 * emulate a three-button mouse by leaving two or three fingers on the 81 * trackpad while pressing the button. 82 */ 83 84 /* 85 * Future work 86 * 87 * With the raw sensor data available, we could implement fancier bells 88 * & whistles too, such as pinch-to-zoom. However, wsmouse supports 89 * only four-dimensional mice with buttons, and we already use two 90 * dimensions for mousing and two dimensions for scrolling, so there's 91 * no straightforward way to report zooming and other gestures to the 92 * operating system. Probably a better way to do this would be just to 93 * attach uhid(4) instead of uatp(4) and to read the raw sensors data 94 * yourself -- but that requires hairy mode switching for recent models 95 * (see geyser34_enable_raw_mode). 96 * 97 * XXX Rework the acceleration knobs. 98 * XXX Implement edge scrolling. 99 * XXX Fix sysctl setup; preserve knobs across suspend/resume. 100 * (uatp0 detaches and reattaches across suspend/resume, so as 101 * written, the sysctl tree is torn down and rebuilt, losing any 102 * state the user may have set.) 103 * XXX Refactor motion state so I can understand it again. 104 * Should make a struct uatp_motion for all that state. 105 * XXX Add hooks for ignoring trackpad input while typing. 106 */ 107 108 /* 109 * Classifying devices 110 * 111 * I have only one MacBook to test this driver, but the driver should 112 * be applicable to almost every Apple laptop made since the beginning 113 * of 2005, so the driver reports lots of debugging output to help to 114 * classify devices. Boot with `boot -v' (verbose) and check the 115 * output of `dmesg | grep uatp' to answer the following questions: 116 * 117 * - What devices (vendor, product, class, subclass, proto, USB HID 118 * report dump) fail to attach when you think they should work? 119 * (vendor not apple, class not hid, proto not mouse) 120 * 121 * - What devices have an unknown product id? 122 * `unknown vendor/product id' 123 * 124 * - What devices have the wrong screen-to-trackpad ratios? 125 * `... x sensors, scaled by ... for ... points on screen' 126 * `... y sensors, scaled by ... for ... points on screen' 127 * You can tweak hw.uatp0.x_ratio and hw.uatp0.y_ratio to adjust 128 * this, up to a maximum of 384 for each value. 129 * 130 * - What devices have the wrong input size? 131 * `expected input size ... but got ... for Apple trackpad' 132 * 133 * - What devices give wrong-sized packets? 134 * `discarding ...-byte input' 135 * 136 * - What devices split packets in chunks? 137 * `partial packet: ... bytes' 138 * 139 * - What devices develop large sensor readouts? 140 * `large sensor readout: ...' 141 * 142 * - What devices have the wrong number of sensors? Are there parts of 143 * your trackpad that the system doesn't seem to notice? You can 144 * tweak hw.uatp0.x_sensors and hw.uatp0.y_sensors, up to a maximum 145 * of 32 for each value. 146 */ 147 148 #include <sys/cdefs.h> 149 __KERNEL_RCSID(0, "$NetBSD: uatp.c,v 1.31 2022/03/28 12:45:04 riastradh Exp $"); 150 151 #ifdef _KERNEL_OPT 152 #include "opt_usb.h" 153 #endif 154 155 #include <sys/types.h> 156 #include <sys/param.h> 157 #include <sys/atomic.h> 158 #include <sys/device.h> 159 #include <sys/errno.h> 160 #include <sys/ioctl.h> 161 #include <sys/kernel.h> 162 #include <sys/module.h> 163 #include <sys/sysctl.h> 164 #include <sys/systm.h> 165 #include <sys/time.h> 166 167 /* Order is important here...sigh... */ 168 #include <dev/usb/usb.h> 169 #include <dev/usb/usbdi.h> 170 #include <dev/usb/usbdi_util.h> 171 #include <dev/usb/usbdevs.h> 172 #include <dev/usb/uhidev.h> 173 #include <dev/usb/usbhid.h> 174 #include <dev/hid/hid.h> 175 176 #include <dev/wscons/wsconsio.h> 177 #include <dev/wscons/wsmousevar.h> 178 179 #define CHECK(condition, fail) do { \ 180 if (! (condition)) { \ 181 aprint_error_dev(uatp_dev(sc), "%s: check failed: %s\n",\ 182 __func__, #condition); \ 183 fail; \ 184 } \ 185 } while (0) 186 187 #define UATP_DEBUG_ATTACH __BIT(0) 188 #define UATP_DEBUG_MISC __BIT(1) 189 #define UATP_DEBUG_WSMOUSE __BIT(2) 190 #define UATP_DEBUG_IOCTL __BIT(3) 191 #define UATP_DEBUG_RESET __BIT(4) 192 #define UATP_DEBUG_INTR __BIT(5) 193 #define UATP_DEBUG_PARSE __BIT(6) 194 #define UATP_DEBUG_TAP __BIT(7) 195 #define UATP_DEBUG_EMUL_BUTTON __BIT(8) 196 #define UATP_DEBUG_ACCUMULATE __BIT(9) 197 #define UATP_DEBUG_STATUS __BIT(10) 198 #define UATP_DEBUG_SPURINTR __BIT(11) 199 #define UATP_DEBUG_MOVE __BIT(12) 200 #define UATP_DEBUG_ACCEL __BIT(13) 201 #define UATP_DEBUG_TRACK_DIST __BIT(14) 202 #define UATP_DEBUG_PALM __BIT(15) 203 204 /* 205 * Unconditionally enable the debug output so you don't have to 206 * recompile the kernel to diagnose it. This is not a high-throughput 207 * NIC driver or anything that will be hurt by a few conditionals. 208 */ 209 #define UATP_DEBUG 1 210 211 #if UATP_DEBUG 212 # define DPRINTF(sc, flags, format) do { \ 213 if ((flags) & (sc)->sc_debug_flags) { \ 214 printf("%s: %s: ", device_xname(uatp_dev(sc)), __func__); \ 215 printf format; \ 216 } \ 217 } while (0) 218 #else 219 # define DPRINTF(sc, flags, format) do {} while (0) 220 #endif 221 222 /* Maximum number of bytes in an incoming packet of sensor data. */ 223 #define UATP_MAX_INPUT_SIZE 81 224 225 /* Maximum number of sensors in each dimension. */ 226 #define UATP_MAX_X_SENSORS 32 227 #define UATP_MAX_Y_SENSORS 32 228 #define UATP_MAX_SENSORS 32 229 #define UATP_SENSORS (UATP_MAX_X_SENSORS + UATP_MAX_Y_SENSORS) 230 231 /* Maximum accumulated sensor value. */ 232 #define UATP_MAX_ACC 0xff 233 234 /* Maximum screen dimension to sensor dimension ratios. */ 235 #define UATP_MAX_X_RATIO 0x180 236 #define UATP_MAX_Y_RATIO 0x180 237 #define UATP_MAX_RATIO 0x180 238 239 /* Maximum weight for positions in motion calculation. */ 240 #define UATP_MAX_WEIGHT 0x7f 241 242 /* Maximum possible trackpad position in a single dimension. */ 243 #define UATP_MAX_POSITION (UATP_MAX_SENSORS * UATP_MAX_RATIO) 244 245 /* Bounds on acceleration. */ 246 #define UATP_MAX_MOTION_MULTIPLIER 16 247 248 /* Status bits transmitted in the last byte of an input packet. */ 249 #define UATP_STATUS_BUTTON __BIT(0) /* Button pressed */ 250 #define UATP_STATUS_BASE __BIT(2) /* Base sensor data */ 251 #define UATP_STATUS_POST_RESET __BIT(4) /* Post-reset */ 252 253 /* Forward declarations */ 254 255 struct uatp_softc; /* Device driver state. */ 256 struct uatp_descriptor; /* Descriptor for a particular model. */ 257 struct uatp_parameters; /* Parameters common to a set of models. */ 258 struct uatp_knobs; /* User-settable configuration knobs. */ 259 enum uatp_tap_state { 260 TAP_STATE_INITIAL, 261 TAP_STATE_TAPPING, 262 TAP_STATE_TAPPED, 263 TAP_STATE_DOUBLE_TAPPING, 264 TAP_STATE_DRAGGING_DOWN, 265 TAP_STATE_DRAGGING_UP, 266 TAP_STATE_TAPPING_IN_DRAG, 267 }; 268 269 static const struct uatp_descriptor *find_uatp_descriptor 270 (const struct uhidev_attach_arg *); 271 static device_t uatp_dev(const struct uatp_softc *); 272 static uint8_t *uatp_x_sample(struct uatp_softc *); 273 static uint8_t *uatp_y_sample(struct uatp_softc *); 274 static int *uatp_x_acc(struct uatp_softc *); 275 static int *uatp_y_acc(struct uatp_softc *); 276 static void uatp_clear_position(struct uatp_softc *); 277 static unsigned int uatp_x_sensors(const struct uatp_softc *); 278 static unsigned int uatp_y_sensors(const struct uatp_softc *); 279 static unsigned int uatp_x_ratio(const struct uatp_softc *); 280 static unsigned int uatp_y_ratio(const struct uatp_softc *); 281 static unsigned int uatp_old_raw_weight(const struct uatp_softc *); 282 static unsigned int uatp_old_smoothed_weight(const struct uatp_softc *); 283 static unsigned int uatp_new_raw_weight(const struct uatp_softc *); 284 static int scale_motion(const struct uatp_softc *, int, int *, 285 const unsigned int *, const unsigned int *); 286 static int uatp_scale_motion(const struct uatp_softc *, int, int *); 287 static int uatp_scale_fast_motion(const struct uatp_softc *, int, int *); 288 static int uatp_match(device_t, cfdata_t, void *); 289 static void uatp_attach(device_t, device_t, void *); 290 static void uatp_setup_sysctl(struct uatp_softc *); 291 static bool uatp_setup_sysctl_knob(struct uatp_softc *, int *, const char *, 292 const char *); 293 static void uatp_childdet(device_t, device_t); 294 static int uatp_detach(device_t, int); 295 static int uatp_activate(device_t, enum devact); 296 static int uatp_enable(void *); 297 static void uatp_disable(void *); 298 static int uatp_ioctl(void *, unsigned long, void *, int, struct lwp *); 299 static void geyser34_enable_raw_mode(struct uatp_softc *); 300 static void geyser34_initialize(struct uatp_softc *); 301 static void geyser34_finalize(struct uatp_softc *); 302 static void geyser34_deferred_reset(struct uatp_softc *); 303 static void geyser34_reset_task(void *); 304 static void uatp_intr(void *, void *, unsigned int); 305 static bool base_sample_softc_flag(const struct uatp_softc *, const uint8_t *); 306 static bool base_sample_input_flag(const struct uatp_softc *, const uint8_t *); 307 static void read_sample_1(uint8_t *, uint8_t *, const uint8_t *); 308 static void read_sample_2(uint8_t *, uint8_t *, const uint8_t *); 309 static void accumulate_sample_1(struct uatp_softc *); 310 static void accumulate_sample_2(struct uatp_softc *); 311 static void uatp_input(struct uatp_softc *, uint32_t, int, int, int, int); 312 static uint32_t uatp_tapped_buttons(struct uatp_softc *); 313 static bool interpret_input(struct uatp_softc *, int *, int *, int *, int *, 314 uint32_t *); 315 static unsigned int interpret_dimension(struct uatp_softc *, const int *, 316 unsigned int, unsigned int, unsigned int *, unsigned int *); 317 static void tap_initialize(struct uatp_softc *); 318 static void tap_finalize(struct uatp_softc *); 319 static void tap_enable(struct uatp_softc *); 320 static void tap_disable(struct uatp_softc *); 321 static void tap_transition(struct uatp_softc *, enum uatp_tap_state, 322 const struct timeval *, unsigned int, unsigned int); 323 static void tap_transition_initial(struct uatp_softc *); 324 static void tap_transition_tapping(struct uatp_softc *, const struct timeval *, 325 unsigned int); 326 static void tap_transition_double_tapping(struct uatp_softc *, 327 const struct timeval *, unsigned int); 328 static void tap_transition_dragging_down(struct uatp_softc *); 329 static void tap_transition_tapping_in_drag(struct uatp_softc *, 330 const struct timeval *, unsigned int); 331 static void tap_transition_tapped(struct uatp_softc *, const struct timeval *); 332 static void tap_transition_dragging_up(struct uatp_softc *); 333 static void tap_reset(struct uatp_softc *); 334 static void tap_reset_wait(struct uatp_softc *); 335 static void tap_touched(struct uatp_softc *, unsigned int); 336 static bool tap_released(struct uatp_softc *); 337 static void schedule_untap(struct uatp_softc *); 338 static void untap_callout(void *); 339 static uint32_t emulated_buttons(struct uatp_softc *, unsigned int); 340 static void update_position(struct uatp_softc *, unsigned int, 341 unsigned int, unsigned int, int *, int *, int *, int *); 342 static void move_mouse(struct uatp_softc *, unsigned int, unsigned int, 343 int *, int *); 344 static void scroll_wheel(struct uatp_softc *, unsigned int, unsigned int, 345 int *, int *); 346 static void move(struct uatp_softc *, const char *, unsigned int, unsigned int, 347 int *, int *, int *, int *, unsigned int *, unsigned int *, int *, int *); 348 static int smooth(struct uatp_softc *, unsigned int, unsigned int, 349 unsigned int); 350 static bool motion_below_threshold(struct uatp_softc *, unsigned int, 351 int, int); 352 static int accelerate(struct uatp_softc *, unsigned int, unsigned int, 353 unsigned int, unsigned int, bool, int *); 354 355 struct uatp_knobs { 356 /* 357 * Button emulation. What do we do when two or three fingers 358 * are on the trackpad when the user presses the button? 359 */ 360 unsigned int two_finger_buttons; 361 unsigned int three_finger_buttons; 362 363 #if 0 364 /* 365 * Edge scrolling. 366 * 367 * XXX Implement this. What units should these be in? 368 */ 369 unsigned int top_edge; 370 unsigned int bottom_edge; 371 unsigned int left_edge; 372 unsigned int right_edge; 373 #endif 374 375 /* 376 * Multifinger tracking. What do we do with multiple fingers? 377 * 0. Ignore them. 378 * 1. Try to interpret them as ordinary mousing. 379 * 2. Act like a two-dimensional scroll wheel. 380 */ 381 unsigned int multifinger_track; 382 383 /* 384 * Sensor parameters. 385 */ 386 unsigned int x_sensors; 387 unsigned int x_ratio; 388 unsigned int y_sensors; 389 unsigned int y_ratio; 390 unsigned int sensor_threshold; 391 unsigned int sensor_normalizer; 392 unsigned int palm_width; 393 unsigned int old_raw_weight; 394 unsigned int old_smoothed_weight; 395 unsigned int new_raw_weight; 396 397 /* 398 * Motion parameters. 399 * 400 * XXX There should be a more principled model of acceleration. 401 */ 402 unsigned int motion_remainder; 403 unsigned int motion_threshold; 404 unsigned int motion_multiplier; 405 unsigned int motion_divisor; 406 unsigned int fast_motion_threshold; 407 unsigned int fast_motion_multiplier; 408 unsigned int fast_motion_divisor; 409 unsigned int fast_per_direction; 410 unsigned int motion_delay; 411 412 /* 413 * Tapping. 414 */ 415 unsigned int tap_limit_msec; 416 unsigned int double_tap_limit_msec; 417 unsigned int one_finger_tap_buttons; 418 unsigned int two_finger_tap_buttons; 419 unsigned int three_finger_tap_buttons; 420 unsigned int tap_track_distance_limit; 421 }; 422 423 static const struct uatp_knobs default_knobs = { 424 /* 425 * Button emulation. Fingers on the trackpad don't change it 426 * by default -- it's still the left button. 427 * 428 * XXX The left button should have a name. 429 */ 430 .two_finger_buttons = 1, 431 .three_finger_buttons = 1, 432 433 #if 0 434 /* 435 * Edge scrolling. Off by default. 436 */ 437 .top_edge = 0, 438 .bottom_edge = 0, 439 .left_edge = 0, 440 .right_edge = 0, 441 #endif 442 443 /* 444 * Multifinger tracking. Ignore by default. 445 */ 446 .multifinger_track = 0, 447 448 /* 449 * Sensor parameters. 450 */ 451 .x_sensors = 0, /* default for model */ 452 .x_ratio = 0, /* default for model */ 453 .y_sensors = 0, /* default for model */ 454 .y_ratio = 0, /* default for model */ 455 .sensor_threshold = 5, 456 .sensor_normalizer = 5, 457 .palm_width = 0, /* palm detection disabled */ 458 .old_raw_weight = 0, 459 .old_smoothed_weight = 5, 460 .new_raw_weight = 1, 461 462 /* 463 * Motion parameters. 464 */ 465 .motion_remainder = 1, 466 .motion_threshold = 0, 467 .motion_multiplier = 1, 468 .motion_divisor = 1, 469 .fast_motion_threshold = 10, 470 .fast_motion_multiplier = 3, 471 .fast_motion_divisor = 2, 472 .fast_per_direction = 0, 473 .motion_delay = 4, 474 475 /* 476 * Tapping. Disabled by default, with a reasonable time set 477 * nevertheless so that you can just set the buttons to enable 478 * it. 479 */ 480 .tap_limit_msec = 100, 481 .double_tap_limit_msec = 200, 482 .one_finger_tap_buttons = 0, 483 .two_finger_tap_buttons = 0, 484 .three_finger_tap_buttons = 0, 485 .tap_track_distance_limit = 200, 486 }; 487 488 struct uatp_softc { 489 device_t sc_dev; 490 struct uhidev *sc_hdev; /* uhidev(9) parent. */ 491 struct usbd_device *sc_udev; /* USB device. */ 492 struct usbd_interface *sc_iface0; /* Geyser 3/4 reset interface. */ 493 device_t sc_wsmousedev; /* Attached wsmouse device. */ 494 const struct uatp_parameters *sc_parameters; 495 struct uatp_knobs sc_knobs; 496 struct sysctllog *sc_log; /* Log for sysctl knobs. */ 497 const struct sysctlnode *sc_node; /* Our sysctl node. */ 498 unsigned int sc_input_size; /* Input packet size. */ 499 uint8_t sc_input[UATP_MAX_INPUT_SIZE]; /* Buffer for a packet. */ 500 unsigned int sc_input_index; /* Current index into sc_input. */ 501 int sc_acc[UATP_SENSORS]; /* Accumulated sensor state. */ 502 uint8_t sc_base[UATP_SENSORS]; /* Base sample. */ 503 uint8_t sc_sample[UATP_SENSORS];/* Current sample. */ 504 unsigned int sc_motion_timer; /* XXX describe; motion_delay */ 505 int sc_x_raw; /* Raw horiz. mouse position. */ 506 int sc_y_raw; /* Raw vert. mouse position. */ 507 int sc_z_raw; /* Raw horiz. scroll position. */ 508 int sc_w_raw; /* Raw vert. scroll position. */ 509 int sc_x_smoothed; /* Smoothed horiz. mouse position. */ 510 int sc_y_smoothed; /* Smoothed vert. mouse position. */ 511 int sc_z_smoothed; /* Smoothed horiz. scroll position. */ 512 int sc_w_smoothed; /* Smoothed vert. scroll position. */ 513 int sc_x_remainder; /* Remainders from acceleration. */ 514 int sc_y_remainder; 515 int sc_z_remainder; 516 int sc_w_remainder; 517 unsigned int sc_track_distance; /* Distance^2 finger has tracked, 518 * squared to avoid sqrt in kernel. */ 519 uint32_t sc_status; /* Status flags: */ 520 #define UATP_ENABLED __BIT(0) /* . Is the wsmouse enabled? */ 521 #define UATP_DYING __BIT(1) /* . Have we been deactivated? */ 522 #define UATP_VALID __BIT(2) /* . Do we have valid sensor data? */ 523 struct usb_task sc_reset_task; /* Task for resetting device. */ 524 525 callout_t sc_untap_callout; /* Releases button after tap. */ 526 kmutex_t sc_tap_mutex; /* Protects the following fields. */ 527 enum uatp_tap_state sc_tap_state; /* Current tap state. */ 528 unsigned int sc_tapping_fingers; /* No. fingers tapping. */ 529 unsigned int sc_tapped_fingers; /* No. fingers of last tap. */ 530 struct timeval sc_tap_timer; /* Timer for tap state transitions. */ 531 uint32_t sc_buttons; /* Physical buttons pressed. */ 532 uint32_t sc_all_buttons; /* Buttons pressed or tapped. */ 533 534 #if UATP_DEBUG 535 uint32_t sc_debug_flags; /* Debugging output enabled. */ 536 #endif 537 }; 538 539 struct uatp_descriptor { 540 uint16_t vendor; 541 uint16_t product; 542 const char *description; 543 const struct uatp_parameters *parameters; 544 }; 545 546 struct uatp_parameters { 547 unsigned int x_ratio; /* Screen width / trackpad width. */ 548 unsigned int x_sensors; /* Number of horizontal sensors. */ 549 unsigned int x_sensors_17; /* XXX Same, on a 17" laptop. */ 550 unsigned int y_ratio; /* Screen height / trackpad height. */ 551 unsigned int y_sensors; /* Number of vertical sensors. */ 552 unsigned int input_size; /* Size in bytes of input packets. */ 553 554 /* Device-specific initialization routine. May be null. */ 555 void (*initialize)(struct uatp_softc *); 556 557 /* Device-specific finalization routine. May be null. */ 558 void (*finalize)(struct uatp_softc *); 559 560 /* Tests whether this is a base sample. Second argument is 561 * input_size bytes long. */ 562 bool (*base_sample)(const struct uatp_softc *, const uint8_t *); 563 564 /* Reads a sensor sample from an input packet. First argument 565 * is UATP_MAX_X_SENSORS bytes long; second, UATP_MAX_Y_SENSORS 566 * bytes; third, input_size bytes. */ 567 void (*read_sample)(uint8_t *, uint8_t *, const uint8_t *); 568 569 /* Accumulates sensor state in sc->sc_acc. */ 570 void (*accumulate)(struct uatp_softc *); 571 572 /* Called on spurious interrupts to reset. May be null. */ 573 void (*reset)(struct uatp_softc *); 574 }; 575 576 /* Known device parameters */ 577 578 static const struct uatp_parameters fountain_parameters = { 579 .x_ratio = 64, .x_sensors = 16, .x_sensors_17 = 26, 580 .y_ratio = 43, .y_sensors = 16, 581 .input_size = 81, 582 .initialize = NULL, 583 .finalize = NULL, 584 .base_sample = base_sample_softc_flag, 585 .read_sample = read_sample_1, 586 .accumulate = accumulate_sample_1, 587 .reset = NULL, 588 }; 589 590 static const struct uatp_parameters geyser_1_parameters = { 591 .x_ratio = 64, .x_sensors = 16, .x_sensors_17 = 26, 592 .y_ratio = 43, .y_sensors = 16, 593 .input_size = 81, 594 .initialize = NULL, 595 .finalize = NULL, 596 .base_sample = base_sample_softc_flag, 597 .read_sample = read_sample_1, 598 .accumulate = accumulate_sample_1, 599 .reset = NULL, 600 }; 601 602 static const struct uatp_parameters geyser_2_parameters = { 603 .x_ratio = 64, .x_sensors = 15, .x_sensors_17 = 20, 604 .y_ratio = 43, .y_sensors = 9, 605 .input_size = 64, 606 .initialize = NULL, 607 .finalize = NULL, 608 .base_sample = base_sample_softc_flag, 609 .read_sample = read_sample_2, 610 .accumulate = accumulate_sample_1, 611 .reset = NULL, 612 }; 613 614 /* 615 * The Geyser 3 and Geyser 4 share parameters. They also present 616 * generic USB HID mice on a different report id, so we have smaller 617 * packets by one byte (uhidev handles multiplexing report ids) and 618 * extra initialization work to switch the mode from generic USB HID 619 * mouse to Apple trackpad. 620 */ 621 622 static const struct uatp_parameters geyser_3_4_parameters = { 623 .x_ratio = 64, .x_sensors = 20, /* XXX */ .x_sensors_17 = 0, 624 .y_ratio = 64, .y_sensors = 9, 625 .input_size = 63, /* 64, minus one for the report id. */ 626 .initialize = geyser34_initialize, 627 .finalize = geyser34_finalize, 628 .base_sample = base_sample_input_flag, 629 .read_sample = read_sample_2, 630 .accumulate = accumulate_sample_2, 631 .reset = geyser34_deferred_reset, 632 }; 633 634 /* Known device models */ 635 636 #define APPLE_TRACKPAD(PRODUCT, DESCRIPTION, PARAMETERS) \ 637 { \ 638 .vendor = USB_VENDOR_APPLE, \ 639 .product = (PRODUCT), \ 640 .description = "Apple " DESCRIPTION " trackpad", \ 641 .parameters = (& (PARAMETERS)), \ 642 } 643 644 #define POWERBOOK_TRACKPAD(PRODUCT, PARAMETERS) \ 645 APPLE_TRACKPAD(PRODUCT, "PowerBook/iBook", PARAMETERS) 646 #define MACBOOK_TRACKPAD(PRODUCT, PARAMETERS) \ 647 APPLE_TRACKPAD(PRODUCT, "MacBook/MacBook Pro", PARAMETERS) 648 649 static const struct uatp_descriptor uatp_descriptors[] = 650 { 651 POWERBOOK_TRACKPAD(0x020e, fountain_parameters), 652 POWERBOOK_TRACKPAD(0x020f, fountain_parameters), 653 POWERBOOK_TRACKPAD(0x030a, fountain_parameters), 654 655 POWERBOOK_TRACKPAD(0x030b, geyser_1_parameters), 656 657 POWERBOOK_TRACKPAD(0x0214, geyser_2_parameters), 658 POWERBOOK_TRACKPAD(0x0215, geyser_2_parameters), 659 POWERBOOK_TRACKPAD(0x0216, geyser_2_parameters), 660 661 MACBOOK_TRACKPAD(0x0217, geyser_3_4_parameters), /* 3 */ 662 MACBOOK_TRACKPAD(0x0218, geyser_3_4_parameters), /* 3 */ 663 MACBOOK_TRACKPAD(0x0219, geyser_3_4_parameters), /* 3 */ 664 665 MACBOOK_TRACKPAD(0x021a, geyser_3_4_parameters), /* 4 */ 666 MACBOOK_TRACKPAD(0x021b, geyser_3_4_parameters), /* 4 */ 667 MACBOOK_TRACKPAD(0x021c, geyser_3_4_parameters), /* 4 */ 668 669 MACBOOK_TRACKPAD(0x0229, geyser_3_4_parameters), /* 4 */ 670 MACBOOK_TRACKPAD(0x022a, geyser_3_4_parameters), /* 4 */ 671 MACBOOK_TRACKPAD(0x022b, geyser_3_4_parameters), /* 4 */ 672 }; 673 674 #undef MACBOOK_TRACKPAD 675 #undef POWERBOOK_TRACKPAD 676 #undef APPLE_TRACKPAD 677 678 /* Miscellaneous utilities */ 679 680 static const struct uatp_descriptor * 681 find_uatp_descriptor(const struct uhidev_attach_arg *uha) 682 { 683 unsigned int i; 684 685 for (i = 0; i < __arraycount(uatp_descriptors); i++) 686 if ((uha->uiaa->uiaa_vendor == uatp_descriptors[i].vendor) && 687 (uha->uiaa->uiaa_product == uatp_descriptors[i].product)) 688 return &uatp_descriptors[i]; 689 690 return NULL; 691 } 692 693 static device_t 694 uatp_dev(const struct uatp_softc *sc) 695 { 696 return sc->sc_dev; 697 } 698 699 static uint8_t * 700 uatp_x_sample(struct uatp_softc *sc) 701 { 702 return &sc->sc_sample[0]; 703 } 704 705 static uint8_t * 706 uatp_y_sample(struct uatp_softc *sc) 707 { 708 return &sc->sc_sample[UATP_MAX_X_SENSORS]; 709 } 710 711 static int * 712 uatp_x_acc(struct uatp_softc *sc) 713 { 714 return &sc->sc_acc[0]; 715 } 716 717 static int * 718 uatp_y_acc(struct uatp_softc *sc) 719 { 720 return &sc->sc_acc[UATP_MAX_X_SENSORS]; 721 } 722 723 static void 724 uatp_clear_position(struct uatp_softc *sc) 725 { 726 memset(sc->sc_acc, 0, sizeof(sc->sc_acc)); 727 sc->sc_motion_timer = 0; 728 sc->sc_x_raw = sc->sc_x_smoothed = -1; 729 sc->sc_y_raw = sc->sc_y_smoothed = -1; 730 sc->sc_z_raw = sc->sc_z_smoothed = -1; 731 sc->sc_w_raw = sc->sc_w_smoothed = -1; 732 sc->sc_x_remainder = 0; 733 sc->sc_y_remainder = 0; 734 sc->sc_z_remainder = 0; 735 sc->sc_w_remainder = 0; 736 sc->sc_track_distance = 0; 737 } 738 739 static unsigned int 740 uatp_x_sensors(const struct uatp_softc *sc) 741 { 742 if ((0 < sc->sc_knobs.x_sensors) && 743 (sc->sc_knobs.x_sensors <= UATP_MAX_X_SENSORS)) 744 return sc->sc_knobs.x_sensors; 745 else 746 return sc->sc_parameters->x_sensors; 747 } 748 749 static unsigned int 750 uatp_y_sensors(const struct uatp_softc *sc) 751 { 752 if ((0 < sc->sc_knobs.y_sensors) && 753 (sc->sc_knobs.y_sensors <= UATP_MAX_Y_SENSORS)) 754 return sc->sc_knobs.y_sensors; 755 else 756 return sc->sc_parameters->y_sensors; 757 } 758 759 static unsigned int 760 uatp_x_ratio(const struct uatp_softc *sc) 761 { 762 /* XXX Reject bogus values in sysctl. */ 763 if ((0 < sc->sc_knobs.x_ratio) && 764 (sc->sc_knobs.x_ratio <= UATP_MAX_X_RATIO)) 765 return sc->sc_knobs.x_ratio; 766 else 767 return sc->sc_parameters->x_ratio; 768 } 769 770 static unsigned int 771 uatp_y_ratio(const struct uatp_softc *sc) 772 { 773 /* XXX Reject bogus values in sysctl. */ 774 if ((0 < sc->sc_knobs.y_ratio) && 775 (sc->sc_knobs.y_ratio <= UATP_MAX_Y_RATIO)) 776 return sc->sc_knobs.y_ratio; 777 else 778 return sc->sc_parameters->y_ratio; 779 } 780 781 static unsigned int 782 uatp_old_raw_weight(const struct uatp_softc *sc) 783 { 784 /* XXX Reject bogus values in sysctl. */ 785 if (sc->sc_knobs.old_raw_weight <= UATP_MAX_WEIGHT) 786 return sc->sc_knobs.old_raw_weight; 787 else 788 return 0; 789 } 790 791 static unsigned int 792 uatp_old_smoothed_weight(const struct uatp_softc *sc) 793 { 794 /* XXX Reject bogus values in sysctl. */ 795 if (sc->sc_knobs.old_smoothed_weight <= UATP_MAX_WEIGHT) 796 return sc->sc_knobs.old_smoothed_weight; 797 else 798 return 0; 799 } 800 801 static unsigned int 802 uatp_new_raw_weight(const struct uatp_softc *sc) 803 { 804 /* XXX Reject bogus values in sysctl. */ 805 if ((0 < sc->sc_knobs.new_raw_weight) && 806 (sc->sc_knobs.new_raw_weight <= UATP_MAX_WEIGHT)) 807 return sc->sc_knobs.new_raw_weight; 808 else 809 return 1; 810 } 811 812 static int 813 scale_motion(const struct uatp_softc *sc, int delta, int *remainder, 814 const unsigned int *multiplier, const unsigned int *divisor) 815 { 816 int product; 817 818 /* XXX Limit the divisor? */ 819 if (((*multiplier) == 0) || 820 ((*multiplier) > UATP_MAX_MOTION_MULTIPLIER) || 821 ((*divisor) == 0)) 822 DPRINTF(sc, UATP_DEBUG_ACCEL, 823 ("bad knobs; %d (+ %d) --> %d, rem 0\n", 824 delta, *remainder, (delta + (*remainder)))); 825 else 826 DPRINTF(sc, UATP_DEBUG_ACCEL, 827 ("scale %d (+ %d) by %u/%u --> %d, rem %d\n", 828 delta, *remainder, 829 (*multiplier), (*divisor), 830 (((delta + (*remainder)) * ((int) (*multiplier))) 831 / ((int) (*divisor))), 832 (((delta + (*remainder)) * ((int) (*multiplier))) 833 % ((int) (*divisor))))); 834 835 if (sc->sc_knobs.motion_remainder) 836 delta += *remainder; 837 *remainder = 0; 838 839 if (((*multiplier) == 0) || 840 ((*multiplier) > UATP_MAX_MOTION_MULTIPLIER) || 841 ((*divisor) == 0)) 842 return delta; 843 844 product = (delta * ((int) (*multiplier))); 845 *remainder = (product % ((int) (*divisor))); 846 return product / ((int) (*divisor)); 847 } 848 849 static int 850 uatp_scale_motion(const struct uatp_softc *sc, int delta, int *remainder) 851 { 852 return scale_motion(sc, delta, remainder, 853 &sc->sc_knobs.motion_multiplier, 854 &sc->sc_knobs.motion_divisor); 855 } 856 857 static int 858 uatp_scale_fast_motion(const struct uatp_softc *sc, int delta, int *remainder) 859 { 860 return scale_motion(sc, delta, remainder, 861 &sc->sc_knobs.fast_motion_multiplier, 862 &sc->sc_knobs.fast_motion_divisor); 863 } 864 865 /* Driver goop */ 866 867 CFATTACH_DECL2_NEW(uatp, sizeof(struct uatp_softc), uatp_match, uatp_attach, 868 uatp_detach, uatp_activate, NULL, uatp_childdet); 869 870 static const struct wsmouse_accessops uatp_accessops = { 871 .enable = uatp_enable, 872 .disable = uatp_disable, 873 .ioctl = uatp_ioctl, 874 }; 875 876 static int 877 uatp_match(device_t parent, cfdata_t match, void *aux) 878 { 879 const struct uhidev_attach_arg *uha = aux; 880 void *report_descriptor; 881 int report_size, input_size; 882 const struct uatp_descriptor *uatp_descriptor; 883 884 aprint_debug("%s: vendor 0x%04x, product 0x%04x\n", __func__, 885 (unsigned int)uha->uiaa->uiaa_vendor, 886 (unsigned int)uha->uiaa->uiaa_product); 887 aprint_debug("%s: class 0x%04x, subclass 0x%04x, proto 0x%04x\n", 888 __func__, 889 (unsigned int)uha->uiaa->uiaa_class, 890 (unsigned int)uha->uiaa->uiaa_subclass, 891 (unsigned int)uha->uiaa->uiaa_proto); 892 893 uhidev_get_report_desc(uha->parent, &report_descriptor, &report_size); 894 input_size = hid_report_size(report_descriptor, report_size, 895 hid_input, uha->reportid); 896 aprint_debug("%s: reportid %d, input size %d\n", __func__, 897 (int)uha->reportid, input_size); 898 899 /* 900 * Keyboards, trackpads, and eject buttons share common vendor 901 * and product ids, but not protocols: only the trackpad 902 * reports a mouse protocol. 903 */ 904 if (uha->uiaa->uiaa_proto != UIPROTO_MOUSE) 905 return UMATCH_NONE; 906 907 /* Check for a known vendor/product id. */ 908 uatp_descriptor = find_uatp_descriptor(uha); 909 if (uatp_descriptor == NULL) { 910 aprint_debug("%s: unknown vendor/product id\n", __func__); 911 return UMATCH_NONE; 912 } 913 914 /* Check for the expected input size. */ 915 if ((input_size < 0) || 916 ((unsigned int)input_size != 917 uatp_descriptor->parameters->input_size)) { 918 aprint_debug("%s: expected input size %u\n", __func__, 919 uatp_descriptor->parameters->input_size); 920 return UMATCH_NONE; 921 } 922 923 return UMATCH_VENDOR_PRODUCT_CONF_IFACE; 924 } 925 926 static void 927 uatp_attach(device_t parent, device_t self, void *aux) 928 { 929 struct uatp_softc *sc = device_private(self); 930 const struct uhidev_attach_arg *uha = aux; 931 const struct uatp_descriptor *uatp_descriptor; 932 void *report_descriptor; 933 int report_size, input_size; 934 struct wsmousedev_attach_args a; 935 936 sc->sc_dev = self; 937 sc->sc_hdev = uha->parent; 938 sc->sc_udev = uha->uiaa->uiaa_device; 939 940 /* Identify ourselves to dmesg. */ 941 uatp_descriptor = find_uatp_descriptor(uha); 942 KASSERT(uatp_descriptor != NULL); 943 aprint_normal(": %s\n", uatp_descriptor->description); 944 aprint_naive(": %s\n", uatp_descriptor->description); 945 aprint_verbose_dev(self, 946 "vendor 0x%04x, product 0x%04x, report id %d\n", 947 (unsigned int)uha->uiaa->uiaa_vendor, 948 (unsigned int)uha->uiaa->uiaa_product, 949 uha->reportid); 950 951 uhidev_get_report_desc(uha->parent, &report_descriptor, &report_size); 952 input_size = hid_report_size(report_descriptor, report_size, hid_input, 953 uha->reportid); 954 KASSERT(0 < input_size); 955 sc->sc_input_size = input_size; 956 957 /* Initialize model-specific parameters. */ 958 sc->sc_parameters = uatp_descriptor->parameters; 959 KASSERT((int)sc->sc_parameters->input_size == input_size); 960 KASSERT(sc->sc_parameters->x_sensors <= UATP_MAX_X_SENSORS); 961 KASSERT(sc->sc_parameters->x_ratio <= UATP_MAX_X_RATIO); 962 KASSERT(sc->sc_parameters->y_sensors <= UATP_MAX_Y_SENSORS); 963 KASSERT(sc->sc_parameters->y_ratio <= UATP_MAX_Y_RATIO); 964 aprint_verbose_dev(self, 965 "%u x sensors, scaled by %u for %u points on screen\n", 966 sc->sc_parameters->x_sensors, sc->sc_parameters->x_ratio, 967 sc->sc_parameters->x_sensors * sc->sc_parameters->x_ratio); 968 aprint_verbose_dev(self, 969 "%u y sensors, scaled by %u for %u points on screen\n", 970 sc->sc_parameters->y_sensors, sc->sc_parameters->y_ratio, 971 sc->sc_parameters->y_sensors * sc->sc_parameters->y_ratio); 972 if (sc->sc_parameters->initialize) 973 sc->sc_parameters->initialize(sc); 974 975 /* Register with pmf. Nothing special for suspend/resume. */ 976 if (!pmf_device_register(self, NULL, NULL)) 977 aprint_error_dev(self, "couldn't establish power handler\n"); 978 979 /* Initialize knobs and create sysctl subtree to tweak them. */ 980 sc->sc_knobs = default_knobs; 981 uatp_setup_sysctl(sc); 982 983 /* Initialize tapping. */ 984 tap_initialize(sc); 985 986 /* Attach wsmouse. */ 987 a.accessops = &uatp_accessops; 988 a.accesscookie = sc; 989 sc->sc_wsmousedev = config_found(self, &a, wsmousedevprint, CFARGS_NONE); 990 } 991 992 /* Sysctl setup */ 993 994 static void 995 uatp_setup_sysctl(struct uatp_softc *sc) 996 { 997 int error; 998 999 error = sysctl_createv(&sc->sc_log, 0, NULL, &sc->sc_node, 0, 1000 CTLTYPE_NODE, device_xname(uatp_dev(sc)), 1001 SYSCTL_DESCR("uatp configuration knobs"), 1002 NULL, 0, NULL, 0, 1003 CTL_HW, CTL_CREATE, CTL_EOL); 1004 if (error != 0) { 1005 aprint_error_dev(uatp_dev(sc), 1006 "unable to set up sysctl tree hw.%s: %d\n", 1007 device_xname(uatp_dev(sc)), error); 1008 goto err; 1009 } 1010 1011 #if UATP_DEBUG 1012 if (!uatp_setup_sysctl_knob(sc, &sc->sc_debug_flags, "debug", 1013 "uatp(4) debug flags")) 1014 goto err; 1015 #endif 1016 1017 /* 1018 * Button emulation. 1019 */ 1020 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.two_finger_buttons, 1021 "two_finger_buttons", 1022 "buttons to emulate with two fingers on trackpad")) 1023 goto err; 1024 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.three_finger_buttons, 1025 "three_finger_buttons", 1026 "buttons to emulate with three fingers on trackpad")) 1027 goto err; 1028 1029 #if 0 1030 /* 1031 * Edge scrolling. 1032 */ 1033 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.top_edge, "top_edge", 1034 "width of top edge for edge scrolling")) 1035 goto err; 1036 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.bottom_edge, 1037 "bottom_edge", "width of bottom edge for edge scrolling")) 1038 goto err; 1039 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.left_edge, "left_edge", 1040 "width of left edge for edge scrolling")) 1041 goto err; 1042 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.right_edge, "right_edge", 1043 "width of right edge for edge scrolling")) 1044 goto err; 1045 #endif 1046 1047 /* 1048 * Multifinger tracking. 1049 */ 1050 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.multifinger_track, 1051 "multifinger_track", 1052 "0 to ignore multiple fingers, 1 to reset, 2 to scroll")) 1053 goto err; 1054 1055 /* 1056 * Sensor parameters. 1057 */ 1058 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.x_sensors, "x_sensors", 1059 "number of x sensors")) 1060 goto err; 1061 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.x_ratio, "x_ratio", 1062 "screen width to trackpad width ratio")) 1063 goto err; 1064 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.y_sensors, "y_sensors", 1065 "number of y sensors")) 1066 goto err; 1067 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.y_ratio, "y_ratio", 1068 "screen height to trackpad height ratio")) 1069 goto err; 1070 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.sensor_threshold, 1071 "sensor_threshold", "sensor threshold")) 1072 goto err; 1073 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.sensor_normalizer, 1074 "sensor_normalizer", "sensor normalizer")) 1075 goto err; 1076 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.palm_width, 1077 "palm_width", "lower bound on width/height of palm")) 1078 goto err; 1079 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.old_raw_weight, 1080 "old_raw_weight", "weight of old raw position")) 1081 goto err; 1082 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.old_smoothed_weight, 1083 "old_smoothed_weight", "weight of old smoothed position")) 1084 goto err; 1085 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.new_raw_weight, 1086 "new_raw_weight", "weight of new raw position")) 1087 goto err; 1088 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.motion_remainder, 1089 "motion_remainder", "remember motion division remainder")) 1090 goto err; 1091 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.motion_threshold, 1092 "motion_threshold", "threshold before finger moves cursor")) 1093 goto err; 1094 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.motion_multiplier, 1095 "motion_multiplier", "numerator of motion scale")) 1096 goto err; 1097 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.motion_divisor, 1098 "motion_divisor", "divisor of motion scale")) 1099 goto err; 1100 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.fast_motion_threshold, 1101 "fast_motion_threshold", "threshold before fast motion")) 1102 goto err; 1103 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.fast_motion_multiplier, 1104 "fast_motion_multiplier", "numerator of fast motion scale")) 1105 goto err; 1106 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.fast_motion_divisor, 1107 "fast_motion_divisor", "divisor of fast motion scale")) 1108 goto err; 1109 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.fast_per_direction, 1110 "fast_per_direction", "don't frobnitz the veeblefitzer!")) 1111 goto err; 1112 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.motion_delay, 1113 "motion_delay", "number of packets before motion kicks in")) 1114 goto err; 1115 1116 /* 1117 * Tapping. 1118 */ 1119 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.tap_limit_msec, 1120 "tap_limit_msec", "milliseconds before a touch is not a tap")) 1121 goto err; 1122 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.double_tap_limit_msec, 1123 "double_tap_limit_msec", 1124 "milliseconds before a second tap keeps the button down")) 1125 goto err; 1126 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.one_finger_tap_buttons, 1127 "one_finger_tap_buttons", "buttons for one-finger taps")) 1128 goto err; 1129 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.two_finger_tap_buttons, 1130 "two_finger_tap_buttons", "buttons for two-finger taps")) 1131 goto err; 1132 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.three_finger_tap_buttons, 1133 "three_finger_tap_buttons", "buttons for three-finger taps")) 1134 goto err; 1135 if (!uatp_setup_sysctl_knob(sc, &sc->sc_knobs.tap_track_distance_limit, 1136 "tap_track_distance_limit", 1137 "maximum distance^2 of tracking during tap")) 1138 goto err; 1139 1140 return; 1141 1142 err: 1143 sysctl_teardown(&sc->sc_log); 1144 sc->sc_node = NULL; 1145 } 1146 1147 static bool 1148 uatp_setup_sysctl_knob(struct uatp_softc *sc, int *ptr, const char *name, 1149 const char *description) 1150 { 1151 int error; 1152 1153 error = sysctl_createv(&sc->sc_log, 0, NULL, NULL, CTLFLAG_READWRITE, 1154 CTLTYPE_INT, name, SYSCTL_DESCR(description), 1155 NULL, 0, ptr, 0, 1156 CTL_HW, sc->sc_node->sysctl_num, CTL_CREATE, CTL_EOL); 1157 if (error != 0) { 1158 aprint_error_dev(uatp_dev(sc), 1159 "unable to setup sysctl node hw.%s.%s: %d\n", 1160 device_xname(uatp_dev(sc)), name, error); 1161 return false; 1162 } 1163 1164 return true; 1165 } 1166 1167 /* More driver goop */ 1168 1169 static void 1170 uatp_childdet(device_t self, device_t child) 1171 { 1172 struct uatp_softc *sc = device_private(self); 1173 1174 DPRINTF(sc, UATP_DEBUG_MISC, ("detaching child %s\n", 1175 device_xname(child))); 1176 1177 /* Our only child is the wsmouse device. */ 1178 if (child == sc->sc_wsmousedev) 1179 sc->sc_wsmousedev = NULL; 1180 } 1181 1182 static int 1183 uatp_detach(device_t self, int flags) 1184 { 1185 struct uatp_softc *sc = device_private(self); 1186 int error; 1187 1188 DPRINTF(sc, UATP_DEBUG_MISC, ("detaching with flags %d\n", flags)); 1189 1190 error = config_detach_children(self, flags); 1191 if (error) 1192 return error; 1193 1194 KASSERT((sc->sc_status & UATP_ENABLED) == 0); 1195 1196 if (sc->sc_parameters->finalize) 1197 sc->sc_parameters->finalize(sc); 1198 1199 pmf_device_deregister(self); 1200 1201 sysctl_teardown(&sc->sc_log); 1202 sc->sc_node = NULL; 1203 1204 tap_finalize(sc); 1205 1206 return 0; 1207 } 1208 1209 static int 1210 uatp_activate(device_t self, enum devact act) 1211 { 1212 struct uatp_softc *sc = device_private(self); 1213 1214 DPRINTF(sc, UATP_DEBUG_MISC, ("act %d\n", (int)act)); 1215 1216 if (act != DVACT_DEACTIVATE) 1217 return EOPNOTSUPP; 1218 1219 sc->sc_status |= UATP_DYING; 1220 1221 return 0; 1222 } 1223 1224 /* wsmouse routines */ 1225 1226 static int 1227 uatp_enable(void *v) 1228 { 1229 struct uatp_softc *sc = v; 1230 1231 DPRINTF(sc, UATP_DEBUG_WSMOUSE, ("enabling wsmouse\n")); 1232 1233 /* Refuse to enable if we've been deactivated. */ 1234 if (sc->sc_status & UATP_DYING) { 1235 DPRINTF(sc, UATP_DEBUG_WSMOUSE, ("busy dying\n")); 1236 return EIO; 1237 } 1238 1239 /* Refuse to enable if we already are enabled. */ 1240 if (sc->sc_status & UATP_ENABLED) { 1241 DPRINTF(sc, UATP_DEBUG_WSMOUSE, ("already enabled\n")); 1242 return EBUSY; 1243 } 1244 1245 sc->sc_status |= UATP_ENABLED; 1246 sc->sc_status &=~ UATP_VALID; 1247 sc->sc_input_index = 0; 1248 tap_enable(sc); 1249 uatp_clear_position(sc); 1250 1251 DPRINTF(sc, UATP_DEBUG_MISC, ("uhidev_open(%p)\n", sc->sc_hdev)); 1252 return uhidev_open(sc->sc_hdev, &uatp_intr, sc); 1253 } 1254 1255 static void 1256 uatp_disable(void *v) 1257 { 1258 struct uatp_softc *sc = v; 1259 1260 DPRINTF(sc, UATP_DEBUG_WSMOUSE, ("disabling wsmouse\n")); 1261 1262 if (!(sc->sc_status & UATP_ENABLED)) { 1263 DPRINTF(sc, UATP_DEBUG_WSMOUSE, ("not enabled\n")); 1264 return; 1265 } 1266 1267 tap_disable(sc); 1268 sc->sc_status &=~ UATP_ENABLED; 1269 1270 DPRINTF(sc, UATP_DEBUG_MISC, ("uhidev_close(%p)\n", sc->sc_hdev)); 1271 uhidev_close(sc->sc_hdev); 1272 } 1273 1274 static int 1275 uatp_ioctl(void *v, unsigned long cmd, void *data, int flag, struct lwp *p) 1276 { 1277 1278 DPRINTF((struct uatp_softc*)v, UATP_DEBUG_IOCTL, 1279 ("cmd %lx, data %p, flag %x, lwp %p\n", cmd, data, flag, p)); 1280 1281 /* XXX Implement any relevant wsmouse(4) ioctls. */ 1282 return EPASSTHROUGH; 1283 } 1284 1285 /* 1286 * The Geyser 3 and 4 models talk the generic USB HID mouse protocol by 1287 * default. This mode switch makes them give raw sensor data instead 1288 * so that we can implement tapping, two-finger scrolling, &c. 1289 */ 1290 1291 #define GEYSER34_RAW_MODE 0x04 1292 #define GEYSER34_MODE_REPORT_ID 0 1293 #define GEYSER34_MODE_INTERFACE 0 1294 #define GEYSER34_MODE_PACKET_SIZE 8 1295 1296 static void 1297 geyser34_enable_raw_mode(struct uatp_softc *sc) 1298 { 1299 uint8_t report[GEYSER34_MODE_PACKET_SIZE]; 1300 usbd_status status; 1301 1302 DPRINTF(sc, UATP_DEBUG_RESET, ("get feature report\n")); 1303 status = usbd_get_report(sc->sc_iface0, UHID_FEATURE_REPORT, 1304 GEYSER34_MODE_REPORT_ID, report, sizeof(report)); 1305 if (status != USBD_NORMAL_COMPLETION) { 1306 aprint_error_dev(uatp_dev(sc), 1307 "error reading feature report: %s\n", usbd_errstr(status)); 1308 return; 1309 } 1310 1311 #if UATP_DEBUG 1312 if (sc->sc_debug_flags & UATP_DEBUG_RESET) { 1313 unsigned int i; 1314 DPRINTF(sc, UATP_DEBUG_RESET, ("old feature report:")); 1315 for (i = 0; i < GEYSER34_MODE_PACKET_SIZE; i++) 1316 printf(" %02x", (unsigned int)report[i]); 1317 printf("\n"); 1318 /* Doing this twice is harmless here and lets this be 1319 * one ifdef. */ 1320 report[0] = GEYSER34_RAW_MODE; 1321 DPRINTF(sc, UATP_DEBUG_RESET, ("new feature report:")); 1322 for (i = 0; i < GEYSER34_MODE_PACKET_SIZE; i++) 1323 printf(" %02x", (unsigned int)report[i]); 1324 printf("\n"); 1325 } 1326 #endif 1327 1328 report[0] = GEYSER34_RAW_MODE; 1329 1330 DPRINTF(sc, UATP_DEBUG_RESET, ("set feature report\n")); 1331 status = usbd_set_report(sc->sc_iface0, UHID_FEATURE_REPORT, 1332 GEYSER34_MODE_REPORT_ID, report, sizeof(report)); 1333 if (status != USBD_NORMAL_COMPLETION) { 1334 aprint_error_dev(uatp_dev(sc), 1335 "error writing feature report: %s\n", usbd_errstr(status)); 1336 return; 1337 } 1338 } 1339 1340 /* 1341 * The Geyser 3 and 4 need to be reset periodically after we detect a 1342 * continual flow of spurious interrupts. We use a USB task for this. 1343 */ 1344 1345 static void 1346 geyser34_initialize(struct uatp_softc *sc) 1347 { 1348 usbd_status err __diagused; 1349 1350 DPRINTF(sc, UATP_DEBUG_MISC, ("initializing\n")); 1351 err = usbd_device2interface_handle(sc->sc_udev, 0, &sc->sc_iface0); 1352 KASSERT(err == 0); /* always an interface 0 if attached */ 1353 geyser34_enable_raw_mode(sc); 1354 usb_init_task(&sc->sc_reset_task, &geyser34_reset_task, sc, 0); 1355 } 1356 1357 static void 1358 geyser34_finalize(struct uatp_softc *sc) 1359 { 1360 1361 DPRINTF(sc, UATP_DEBUG_MISC, ("finalizing\n")); 1362 usb_rem_task_wait(sc->sc_udev, &sc->sc_reset_task, USB_TASKQ_DRIVER, 1363 NULL); 1364 } 1365 1366 static void 1367 geyser34_deferred_reset(struct uatp_softc *sc) 1368 { 1369 1370 DPRINTF(sc, UATP_DEBUG_RESET, ("deferring reset\n")); 1371 usb_add_task(sc->sc_udev, &sc->sc_reset_task, USB_TASKQ_DRIVER); 1372 } 1373 1374 static void 1375 geyser34_reset_task(void *arg) 1376 { 1377 struct uatp_softc *sc = arg; 1378 1379 DPRINTF(sc, UATP_DEBUG_RESET, ("resetting\n")); 1380 1381 /* Reset by putting it into raw mode. Not sure why. */ 1382 geyser34_enable_raw_mode(sc); 1383 } 1384 1385 /* Interrupt handler */ 1386 1387 static void 1388 uatp_intr(void *cookie, void *ibuf, unsigned int len) 1389 { 1390 struct uatp_softc *sc = cookie; 1391 uint8_t *input; 1392 int dx, dy, dz, dw; 1393 uint32_t buttons; 1394 1395 DPRINTF(sc, UATP_DEBUG_INTR, ("softc %p, ibuf %p, len %u\n", 1396 sc, ibuf, len)); 1397 1398 /* 1399 * Some devices break packets up into chunks, so we accumulate 1400 * input up to the expected packet length, or if it would 1401 * overflow, discard the whole packet and start over. 1402 */ 1403 if (sc->sc_input_size < len) { 1404 aprint_error_dev(uatp_dev(sc), 1405 "discarding %u-byte input packet\n", len); 1406 sc->sc_input_index = 0; 1407 return; 1408 } else if (sc->sc_input_size < (sc->sc_input_index + len)) { 1409 aprint_error_dev(uatp_dev(sc), "discarding %u-byte input\n", 1410 (sc->sc_input_index + len)); 1411 sc->sc_input_index = 0; 1412 return; 1413 } else if (sc->sc_input_size == 81 && len == 17 && 1414 sc->sc_input_index != 64) { 1415 /* 1416 * Quirk of Fountain and Geyser 1 devices: a 17-byte 1417 * packet seems to mean the last one, but sometimes we 1418 * get desynchronized, so drop this one and start over 1419 * if we see a 17-byte packet that's not at the end. 1420 */ 1421 aprint_error_dev(uatp_dev(sc), 1422 "discarding 17-byte nonterminal input at %u\n", 1423 sc->sc_input_index); 1424 sc->sc_input_index = 0; 1425 return; 1426 } 1427 1428 #if UATP_DEBUG 1429 if (sc->sc_debug_flags & UATP_DEBUG_INTR) { 1430 unsigned int i; 1431 uint8_t *bytes = ibuf; 1432 DPRINTF(sc, UATP_DEBUG_INTR, ("raw")); 1433 for (i = 0; i < len; i++) 1434 printf(" %02x", (unsigned int)bytes[i]); 1435 printf("\n"); 1436 } 1437 #endif 1438 1439 memcpy(&sc->sc_input[sc->sc_input_index], ibuf, len); 1440 sc->sc_input_index += len; 1441 if (sc->sc_input_index != sc->sc_input_size) { 1442 /* Wait until packet is complete. */ 1443 DPRINTF(sc, UATP_DEBUG_INTR, ("partial packet: %u bytes\n", 1444 len)); 1445 return; 1446 } 1447 1448 /* Clear the buffer and process the now complete packet. */ 1449 sc->sc_input_index = 0; 1450 input = sc->sc_input; 1451 1452 /* The last byte's first bit is set iff the button is pressed. 1453 * XXX Left button should have a name. */ 1454 buttons = ((input[sc->sc_input_size - 1] & UATP_STATUS_BUTTON) 1455 ? 1 : 0); 1456 1457 /* Read the sample. */ 1458 memset(uatp_x_sample(sc), 0, UATP_MAX_X_SENSORS); 1459 memset(uatp_y_sample(sc), 0, UATP_MAX_Y_SENSORS); 1460 sc->sc_parameters->read_sample(uatp_x_sample(sc), uatp_y_sample(sc), 1461 input); 1462 1463 #if UATP_DEBUG 1464 if (sc->sc_debug_flags & UATP_DEBUG_INTR) { 1465 unsigned int i; 1466 DPRINTF(sc, UATP_DEBUG_INTR, ("x sensors")); 1467 for (i = 0; i < uatp_x_sensors(sc); i++) 1468 printf(" %02x", (unsigned int)uatp_x_sample(sc)[i]); 1469 printf("\n"); 1470 DPRINTF(sc, UATP_DEBUG_INTR, ("y sensors")); 1471 for (i = 0; i < uatp_y_sensors(sc); i++) 1472 printf(" %02x", (unsigned int)uatp_y_sample(sc)[i]); 1473 printf("\n"); 1474 } else if ((sc->sc_debug_flags & UATP_DEBUG_STATUS) && 1475 (input[sc->sc_input_size - 1] &~ 1476 (UATP_STATUS_BUTTON | UATP_STATUS_BASE | 1477 UATP_STATUS_POST_RESET))) 1478 DPRINTF(sc, UATP_DEBUG_STATUS, ("status byte: %02x\n", 1479 input[sc->sc_input_size - 1])); 1480 #endif 1481 1482 /* 1483 * If this is a base sample, initialize the state to interpret 1484 * subsequent samples relative to it, and stop here. 1485 */ 1486 if (sc->sc_parameters->base_sample(sc, input)) { 1487 DPRINTF(sc, UATP_DEBUG_PARSE, 1488 ("base sample, buttons %"PRIx32"\n", buttons)); 1489 /* XXX Should the valid bit ever be reset? */ 1490 sc->sc_status |= UATP_VALID; 1491 uatp_clear_position(sc); 1492 memcpy(sc->sc_base, sc->sc_sample, sizeof(sc->sc_base)); 1493 /* XXX Perform 17" size detection like Linux? */ 1494 return; 1495 } 1496 1497 /* If not, accumulate the change in the sensors. */ 1498 sc->sc_parameters->accumulate(sc); 1499 1500 #if UATP_DEBUG 1501 if (sc->sc_debug_flags & UATP_DEBUG_ACCUMULATE) { 1502 unsigned int i; 1503 DPRINTF(sc, UATP_DEBUG_ACCUMULATE, ("accumulated x state:")); 1504 for (i = 0; i < uatp_x_sensors(sc); i++) 1505 printf(" %02x", (unsigned int)uatp_x_acc(sc)[i]); 1506 printf("\n"); 1507 DPRINTF(sc, UATP_DEBUG_ACCUMULATE, ("accumulated y state:")); 1508 for (i = 0; i < uatp_y_sensors(sc); i++) 1509 printf(" %02x", (unsigned int)uatp_y_acc(sc)[i]); 1510 printf("\n"); 1511 } 1512 #endif 1513 1514 /* Compute the change in coordinates and buttons. */ 1515 dx = dy = dz = dw = 0; 1516 if ((!interpret_input(sc, &dx, &dy, &dz, &dw, &buttons)) && 1517 /* If there's no input because we're releasing a button, 1518 * then it's not spurious. XXX Mutex? */ 1519 (sc->sc_buttons == 0)) { 1520 DPRINTF(sc, UATP_DEBUG_SPURINTR, ("spurious interrupt\n")); 1521 if (sc->sc_parameters->reset) 1522 sc->sc_parameters->reset(sc); 1523 return; 1524 } 1525 1526 /* Report to wsmouse. */ 1527 DPRINTF(sc, UATP_DEBUG_INTR, 1528 ("buttons %"PRIx32", dx %d, dy %d, dz %d, dw %d\n", 1529 buttons, dx, dy, dz, dw)); 1530 mutex_enter(&sc->sc_tap_mutex); 1531 uatp_input(sc, buttons, dx, dy, dz, dw); 1532 mutex_exit(&sc->sc_tap_mutex); 1533 } 1534 1535 /* 1536 * Different ways to discern the base sample initializing the state. 1537 * `base_sample_softc_flag' uses a state flag stored in the softc; 1538 * `base_sample_input_flag' checks a flag at the end of the input 1539 * packet. 1540 */ 1541 1542 static bool 1543 base_sample_softc_flag(const struct uatp_softc *sc, const uint8_t *input) 1544 { 1545 return !(sc->sc_status & UATP_VALID); 1546 } 1547 1548 static bool 1549 base_sample_input_flag(const struct uatp_softc *sc, const uint8_t *input) 1550 { 1551 /* XXX Should we also check the valid flag? */ 1552 return !!(input[sc->sc_input_size - 1] & UATP_STATUS_BASE); 1553 } 1554 1555 /* 1556 * Pick apart the horizontal sensors from the vertical sensors. 1557 * Different models interleave them in different orders. 1558 */ 1559 1560 static void 1561 read_sample_1(uint8_t *x, uint8_t *y, const uint8_t *input) 1562 { 1563 unsigned int i; 1564 1565 for (i = 0; i < 8; i++) { 1566 x[i] = input[5 * i + 2]; 1567 x[i + 8] = input[5 * i + 4]; 1568 x[i + 16] = input[5 * i + 42]; 1569 if (i < 2) 1570 x[i + 24] = input[5 * i + 44]; 1571 1572 y[i] = input[5 * i + 1]; 1573 y[i + 8] = input[5 * i + 3]; 1574 } 1575 } 1576 1577 static void 1578 read_sample_2(uint8_t *x, uint8_t *y, const uint8_t *input) 1579 { 1580 unsigned int i, j; 1581 1582 for (i = 0, j = 19; i < 20; i += 2, j += 3) { 1583 x[i] = input[j]; 1584 x[i + 1] = input[j + 1]; 1585 } 1586 1587 for (i = 0, j = 1; i < 9; i += 2, j += 3) { 1588 y[i] = input[j]; 1589 y[i + 1] = input[j + 1]; 1590 } 1591 } 1592 1593 static void 1594 accumulate_sample_1(struct uatp_softc *sc) 1595 { 1596 unsigned int i; 1597 1598 for (i = 0; i < UATP_SENSORS; i++) { 1599 sc->sc_acc[i] += (int8_t)(sc->sc_sample[i] - sc->sc_base[i]); 1600 if (sc->sc_acc[i] < 0) { 1601 sc->sc_acc[i] = 0; 1602 } else if (UATP_MAX_ACC < sc->sc_acc[i]) { 1603 DPRINTF(sc, UATP_DEBUG_ACCUMULATE, 1604 ("overflow %d\n", sc->sc_acc[i])); 1605 sc->sc_acc[i] = UATP_MAX_ACC; 1606 } 1607 } 1608 1609 memcpy(sc->sc_base, sc->sc_sample, sizeof(sc->sc_base)); 1610 } 1611 1612 static void 1613 accumulate_sample_2(struct uatp_softc *sc) 1614 { 1615 unsigned int i; 1616 1617 for (i = 0; i < UATP_SENSORS; i++) { 1618 sc->sc_acc[i] = (int8_t)(sc->sc_sample[i] - sc->sc_base[i]); 1619 if (sc->sc_acc[i] < -0x80) { 1620 DPRINTF(sc, UATP_DEBUG_ACCUMULATE, 1621 ("underflow %u - %u = %d\n", 1622 (unsigned int)sc->sc_sample[i], 1623 (unsigned int)sc->sc_base[i], 1624 sc->sc_acc[i])); 1625 sc->sc_acc[i] += 0x100; 1626 } 1627 if (0x7f < sc->sc_acc[i]) { 1628 DPRINTF(sc, UATP_DEBUG_ACCUMULATE, 1629 ("overflow %u - %u = %d\n", 1630 (unsigned int)sc->sc_sample[i], 1631 (unsigned int)sc->sc_base[i], 1632 sc->sc_acc[i])); 1633 sc->sc_acc[i] -= 0x100; 1634 } 1635 if (sc->sc_acc[i] < 0) 1636 sc->sc_acc[i] = 0; 1637 } 1638 } 1639 1640 /* 1641 * Report input to wsmouse, if there is anything interesting to report. 1642 * We must take into consideration the current tap-and-drag button 1643 * state. 1644 */ 1645 1646 static void 1647 uatp_input(struct uatp_softc *sc, uint32_t buttons, 1648 int dx, int dy, int dz, int dw) 1649 { 1650 uint32_t all_buttons; 1651 1652 KASSERT(mutex_owned(&sc->sc_tap_mutex)); 1653 all_buttons = buttons | uatp_tapped_buttons(sc); 1654 1655 if ((sc->sc_wsmousedev != NULL) && 1656 ((dx != 0) || (dy != 0) || (dz != 0) || (dw != 0) || 1657 (all_buttons != sc->sc_all_buttons))) { 1658 int s = spltty(); 1659 DPRINTF(sc, UATP_DEBUG_WSMOUSE, ("wsmouse input:" 1660 " buttons %"PRIx32", dx %d, dy %d, dz %d, dw %d\n", 1661 all_buttons, dx, -dy, dz, -dw)); 1662 wsmouse_input(sc->sc_wsmousedev, all_buttons, dx, -dy, dz, -dw, 1663 WSMOUSE_INPUT_DELTA); 1664 splx(s); 1665 } 1666 sc->sc_buttons = buttons; 1667 sc->sc_all_buttons = all_buttons; 1668 } 1669 1670 /* 1671 * Interpret the current tap state to decide whether the tap buttons 1672 * are currently pressed. 1673 */ 1674 1675 static uint32_t 1676 uatp_tapped_buttons(struct uatp_softc *sc) 1677 { 1678 KASSERT(mutex_owned(&sc->sc_tap_mutex)); 1679 switch (sc->sc_tap_state) { 1680 case TAP_STATE_INITIAL: 1681 case TAP_STATE_TAPPING: 1682 return 0; 1683 1684 case TAP_STATE_TAPPED: 1685 case TAP_STATE_DOUBLE_TAPPING: 1686 case TAP_STATE_DRAGGING_DOWN: 1687 case TAP_STATE_DRAGGING_UP: 1688 case TAP_STATE_TAPPING_IN_DRAG: 1689 CHECK((0 < sc->sc_tapped_fingers), return 0); 1690 switch (sc->sc_tapped_fingers) { 1691 case 1: return sc->sc_knobs.one_finger_tap_buttons; 1692 case 2: return sc->sc_knobs.two_finger_tap_buttons; 1693 case 3: 1694 default: return sc->sc_knobs.three_finger_tap_buttons; 1695 } 1696 1697 default: 1698 aprint_error_dev(uatp_dev(sc), "%s: invalid tap state: %d\n", 1699 __func__, sc->sc_tap_state); 1700 return 0; 1701 } 1702 } 1703 1704 /* 1705 * Interpret the current input state to find a difference in all the 1706 * relevant coordinates and buttons to pass on to wsmouse, and update 1707 * any internal driver state necessary to interpret subsequent input 1708 * relative to this one. 1709 */ 1710 1711 static bool 1712 interpret_input(struct uatp_softc *sc, int *dx, int *dy, int *dz, int *dw, 1713 uint32_t *buttons) 1714 { 1715 unsigned int x_pressure, x_raw, x_fingers; 1716 unsigned int y_pressure, y_raw, y_fingers; 1717 unsigned int fingers; 1718 1719 x_pressure = interpret_dimension(sc, uatp_x_acc(sc), 1720 uatp_x_sensors(sc), uatp_x_ratio(sc), &x_raw, &x_fingers); 1721 y_pressure = interpret_dimension(sc, uatp_y_acc(sc), 1722 uatp_y_sensors(sc), uatp_y_ratio(sc), &y_raw, &y_fingers); 1723 1724 DPRINTF(sc, UATP_DEBUG_PARSE, 1725 ("x %u @ %u, %uf; y %u @ %u, %uf; buttons %"PRIx32"\n", 1726 x_pressure, x_raw, x_fingers, 1727 y_pressure, y_raw, y_fingers, 1728 *buttons)); 1729 1730 if ((x_pressure == 0) && (y_pressure == 0)) { 1731 bool ok; 1732 /* No fingers: clear position and maybe report a tap. */ 1733 DPRINTF(sc, UATP_DEBUG_INTR, 1734 ("no position detected; clearing position\n")); 1735 if (*buttons == 0) { 1736 ok = tap_released(sc); 1737 } else { 1738 tap_reset(sc); 1739 /* Button pressed: interrupt is not spurious. */ 1740 ok = true; 1741 } 1742 /* 1743 * Don't clear the position until after tap_released, 1744 * which needs to know the track distance. 1745 */ 1746 uatp_clear_position(sc); 1747 return ok; 1748 } else if ((x_pressure == 0) || (y_pressure == 0)) { 1749 /* XXX What to do here? */ 1750 DPRINTF(sc, UATP_DEBUG_INTR, 1751 ("pressure in only one dimension; ignoring\n")); 1752 return true; 1753 } else if ((x_pressure == 1) && (y_pressure == 1)) { 1754 fingers = uimax(x_fingers, y_fingers); 1755 CHECK((0 < fingers), return false); 1756 if (*buttons == 0) 1757 tap_touched(sc, fingers); 1758 else if (fingers == 1) 1759 tap_reset(sc); 1760 else /* Multiple fingers, button pressed. */ 1761 *buttons = emulated_buttons(sc, fingers); 1762 update_position(sc, fingers, x_raw, y_raw, dx, dy, dz, dw); 1763 return true; 1764 } else { 1765 /* Palm detected in either or both of the dimensions. */ 1766 DPRINTF(sc, UATP_DEBUG_INTR, ("palm detected; ignoring\n")); 1767 return true; 1768 } 1769 } 1770 1771 /* 1772 * Interpret the accumulated sensor state along one dimension to find 1773 * the number, mean position, and pressure of fingers. Returns 0 to 1774 * indicate no pressure, returns 1 and sets *position and *fingers to 1775 * indicate fingers, and returns 2 to indicate palm. 1776 * 1777 * XXX Give symbolic names to the return values. 1778 */ 1779 1780 static unsigned int 1781 interpret_dimension(struct uatp_softc *sc, const int *acc, 1782 unsigned int n_sensors, unsigned int ratio, 1783 unsigned int *position, unsigned int *fingers) 1784 { 1785 unsigned int i, v, n_fingers, sum; 1786 unsigned int total[UATP_MAX_SENSORS]; 1787 unsigned int weighted[UATP_MAX_SENSORS]; 1788 unsigned int sensor_threshold = sc->sc_knobs.sensor_threshold; 1789 unsigned int sensor_normalizer = sc->sc_knobs.sensor_normalizer; 1790 unsigned int width = 0; /* GCC is not smart enough. */ 1791 unsigned int palm_width = sc->sc_knobs.palm_width; 1792 enum { none, nondecreasing, decreasing } state = none; 1793 1794 if (sensor_threshold < sensor_normalizer) 1795 sensor_normalizer = sensor_threshold; 1796 if (palm_width == 0) /* Effectively disable palm detection. */ 1797 palm_width = UATP_MAX_POSITION; 1798 1799 #define CHECK_(condition) CHECK(condition, return 0) 1800 1801 /* 1802 * Arithmetic bounds: 1803 * . n_sensors is at most UATP_MAX_SENSORS, 1804 * . n_fingers is at most UATP_MAX_SENSORS, 1805 * . i is at most UATP_MAX_SENSORS, 1806 * . sc->sc_acc[i] is at most UATP_MAX_ACC, 1807 * . i * sc->sc_acc[i] is at most UATP_MAX_SENSORS * UATP_MAX_ACC, 1808 * . each total[j] is at most UATP_MAX_SENSORS * UATP_MAX_ACC, 1809 * . each weighted[j] is at most UATP_MAX_SENSORS^2 * UATP_MAX_ACC, 1810 * . ratio is at most UATP_MAX_RATIO, 1811 * . each weighted[j] * ratio is at most 1812 * UATP_MAX_SENSORS^2 * UATP_MAX_ACC * UATP_MAX_RATIO, 1813 * which is #x5fa0000 with the current values of the constants, 1814 * and 1815 * . the sum of the positions is at most 1816 * UATP_MAX_SENSORS * UATP_MAX_POSITION, 1817 * which is #x60000 with the current values of the constants. 1818 * Hence all of the arithmetic here fits in int (and thus also 1819 * unsigned int). If you change the constants, though, you 1820 * must update the analysis. 1821 */ 1822 __CTASSERT(0x5fa0000 == (UATP_MAX_SENSORS * UATP_MAX_SENSORS * 1823 UATP_MAX_ACC * UATP_MAX_RATIO)); 1824 __CTASSERT(0x60000 == (UATP_MAX_SENSORS * UATP_MAX_POSITION)); 1825 CHECK_(n_sensors <= UATP_MAX_SENSORS); 1826 CHECK_(ratio <= UATP_MAX_RATIO); 1827 1828 /* 1829 * Detect each finger by looking for a consecutive sequence of 1830 * increasing and then decreasing pressures above the sensor 1831 * threshold. Compute the finger's position as the weighted 1832 * average of positions, weighted by the pressure at that 1833 * position. Finally, return the average finger position. 1834 */ 1835 1836 n_fingers = 0; 1837 memset(weighted, 0, sizeof(weighted)); 1838 memset(total, 0, sizeof(total)); 1839 1840 for (i = 0; i < n_sensors; i++) { 1841 CHECK_(0 <= acc[i]); 1842 v = acc[i]; 1843 1844 /* Ignore values outside a sensible interval. */ 1845 if (v <= sensor_threshold) { 1846 state = none; 1847 continue; 1848 } else if (UATP_MAX_ACC < v) { 1849 aprint_verbose_dev(uatp_dev(sc), 1850 "ignoring large accumulated sensor state: %u\n", 1851 v); 1852 continue; 1853 } 1854 1855 switch (state) { 1856 case none: 1857 n_fingers += 1; 1858 CHECK_(n_fingers <= n_sensors); 1859 state = nondecreasing; 1860 width = 1; 1861 break; 1862 1863 case nondecreasing: 1864 case decreasing: 1865 CHECK_(0 < i); 1866 CHECK_(0 <= acc[i - 1]); 1867 width += 1; 1868 if (palm_width <= (width * ratio)) { 1869 DPRINTF(sc, UATP_DEBUG_PALM, 1870 ("palm detected\n")); 1871 return 2; 1872 } else if ((state == nondecreasing) && 1873 ((unsigned int)acc[i - 1] > v)) { 1874 state = decreasing; 1875 } else if ((state == decreasing) && 1876 ((unsigned int)acc[i - 1] < v)) { 1877 n_fingers += 1; 1878 CHECK_(n_fingers <= n_sensors); 1879 state = nondecreasing; 1880 width = 1; 1881 } 1882 break; 1883 1884 default: 1885 aprint_error_dev(uatp_dev(sc), 1886 "bad finger detection state: %d", state); 1887 return 0; 1888 } 1889 1890 v -= sensor_normalizer; 1891 total[n_fingers - 1] += v; 1892 weighted[n_fingers - 1] += (i * v); 1893 CHECK_(total[n_fingers - 1] <= 1894 (UATP_MAX_SENSORS * UATP_MAX_ACC)); 1895 CHECK_(weighted[n_fingers - 1] <= 1896 (UATP_MAX_SENSORS * UATP_MAX_SENSORS * UATP_MAX_ACC)); 1897 } 1898 1899 if (n_fingers == 0) 1900 return 0; 1901 1902 sum = 0; 1903 for (i = 0; i < n_fingers; i++) { 1904 DPRINTF(sc, UATP_DEBUG_PARSE, 1905 ("finger at %u\n", ((weighted[i] * ratio) / total[i]))); 1906 sum += ((weighted[i] * ratio) / total[i]); 1907 CHECK_(sum <= UATP_MAX_SENSORS * UATP_MAX_POSITION); 1908 } 1909 1910 *fingers = n_fingers; 1911 *position = (sum / n_fingers); 1912 return 1; 1913 1914 #undef CHECK_ 1915 } 1916 1917 /* Tapping */ 1918 1919 /* 1920 * There is a very hairy state machine for detecting taps. At every 1921 * touch, we record the maximum number of fingers touched, and don't 1922 * reset it to zero until the finger is released. 1923 * 1924 * INITIAL STATE 1925 * (no tapping fingers; no tapped fingers) 1926 * - On touch, go to TAPPING STATE. 1927 * - On any other input, remain in INITIAL STATE. 1928 * 1929 * TAPPING STATE: Finger touched; might be tap. 1930 * (tapping fingers; no tapped fingers) 1931 * - On release within the tap limit, go to TAPPED STATE. 1932 * - On release after the tap limit, go to INITIAL STATE. 1933 * - On any other input, remain in TAPPING STATE. 1934 * 1935 * TAPPED STATE: Finger recently tapped, and might double-tap. 1936 * (no tapping fingers; tapped fingers) 1937 * - On touch within the double-tap limit, go to DOUBLE-TAPPING STATE. 1938 * - On touch after the double-tap limit, go to TAPPING STATE. 1939 * - On no event after the double-tap limit, go to INITIAL STATE. 1940 * - On any other input, remain in TAPPED STATE. 1941 * 1942 * DOUBLE-TAPPING STATE: Finger touched soon after tap; might be double-tap. 1943 * (tapping fingers; tapped fingers) 1944 * - On release within the tap limit, release button and go to TAPPED STATE. 1945 * - On release after the tap limit, go to DRAGGING UP STATE. 1946 * - On touch after the tap limit, go to DRAGGING DOWN STATE. 1947 * - On any other input, remain in DOUBLE-TAPPING STATE. 1948 * 1949 * DRAGGING DOWN STATE: Finger has double-tapped and is dragging, not tapping. 1950 * (no tapping fingers; tapped fingers) 1951 * - On release, go to DRAGGING UP STATE. 1952 * - On any other input, remain in DRAGGING DOWN STATE. 1953 * 1954 * DRAGGING UP STATE: Finger has double-tapped and is up. 1955 * (no tapping fingers; tapped fingers) 1956 * - On touch, go to TAPPING IN DRAG STATE. 1957 * - On any other input, remain in DRAGGING UP STATE. 1958 * 1959 * TAPPING IN DRAG STATE: Tap-dancing while cross-dressed. 1960 * (tapping fingers; tapped fingers) 1961 * - On release within the tap limit, go to TAPPED STATE. 1962 * - On release after the tap limit, go to DRAGGING UP STATE. 1963 * - On any other input, remain in TAPPING IN DRAG STATE. 1964 * 1965 * Warning: The graph of states is split into two components, those 1966 * with tapped fingers and those without. The only path from any state 1967 * without tapped fingers to a state with tapped fingers must pass 1968 * through TAPPED STATE. Also, the only transitions into TAPPED STATE 1969 * must be from states with tapping fingers, which become the tapped 1970 * fingers. If you edit the state machine, you must either preserve 1971 * these properties, or globally transform the state machine to avoid 1972 * the bad consequences of violating these properties. 1973 */ 1974 1975 static void 1976 uatp_tap_limit(const struct uatp_softc *sc, struct timeval *limit) 1977 { 1978 unsigned int msec = sc->sc_knobs.tap_limit_msec; 1979 limit->tv_sec = 0; 1980 limit->tv_usec = ((msec < 1000) ? (1000 * msec) : 100000); 1981 } 1982 1983 #if UATP_DEBUG 1984 1985 # define TAP_DEBUG_PRE(sc) tap_debug((sc), __func__, "") 1986 # define TAP_DEBUG_POST(sc) tap_debug((sc), __func__, " ->") 1987 1988 static void 1989 tap_debug(struct uatp_softc *sc, const char *caller, const char *prefix) 1990 { 1991 char buffer[128]; 1992 const char *state; 1993 1994 KASSERT(mutex_owned(&sc->sc_tap_mutex)); 1995 switch (sc->sc_tap_state) { 1996 case TAP_STATE_INITIAL: state = "initial"; break; 1997 case TAP_STATE_TAPPING: state = "tapping"; break; 1998 case TAP_STATE_TAPPED: state = "tapped"; break; 1999 case TAP_STATE_DOUBLE_TAPPING: state = "double-tapping"; break; 2000 case TAP_STATE_DRAGGING_DOWN: state = "dragging-down"; break; 2001 case TAP_STATE_DRAGGING_UP: state = "dragging-up"; break; 2002 case TAP_STATE_TAPPING_IN_DRAG: state = "tapping-in-drag"; break; 2003 default: 2004 snprintf(buffer, sizeof(buffer), "unknown (%d)", 2005 sc->sc_tap_state); 2006 state = buffer; 2007 break; 2008 } 2009 2010 DPRINTF(sc, UATP_DEBUG_TAP, 2011 ("%s:%s state %s, %u tapping, %u tapped\n", 2012 caller, prefix, state, 2013 sc->sc_tapping_fingers, sc->sc_tapped_fingers)); 2014 } 2015 2016 #else /* !UATP_DEBUG */ 2017 2018 # define TAP_DEBUG_PRE(sc) do {} while (0) 2019 # define TAP_DEBUG_POST(sc) do {} while (0) 2020 2021 #endif 2022 2023 static void 2024 tap_initialize(struct uatp_softc *sc) 2025 { 2026 callout_init(&sc->sc_untap_callout, 0); 2027 callout_setfunc(&sc->sc_untap_callout, untap_callout, sc); 2028 mutex_init(&sc->sc_tap_mutex, MUTEX_DEFAULT, IPL_SOFTUSB); 2029 } 2030 2031 static void 2032 tap_finalize(struct uatp_softc *sc) 2033 { 2034 /* XXX Can the callout still be scheduled here? */ 2035 callout_destroy(&sc->sc_untap_callout); 2036 mutex_destroy(&sc->sc_tap_mutex); 2037 } 2038 2039 static void 2040 tap_enable(struct uatp_softc *sc) 2041 { 2042 mutex_enter(&sc->sc_tap_mutex); 2043 tap_transition_initial(sc); 2044 sc->sc_buttons = 0; /* XXX Not the right place? */ 2045 sc->sc_all_buttons = 0; 2046 mutex_exit(&sc->sc_tap_mutex); 2047 } 2048 2049 static void 2050 tap_disable(struct uatp_softc *sc) 2051 { 2052 /* Reset tapping, and wait for any callouts to complete. */ 2053 tap_reset_wait(sc); 2054 } 2055 2056 /* 2057 * Reset tap state. If the untap callout has just fired, it may signal 2058 * a harmless button release event before this returns. 2059 */ 2060 2061 static void 2062 tap_reset(struct uatp_softc *sc) 2063 { 2064 2065 callout_stop(&sc->sc_untap_callout); 2066 mutex_enter(&sc->sc_tap_mutex); 2067 tap_transition_initial(sc); 2068 mutex_exit(&sc->sc_tap_mutex); 2069 } 2070 2071 /* Reset, but don't return until the callout is done running. */ 2072 2073 static void 2074 tap_reset_wait(struct uatp_softc *sc) 2075 { 2076 2077 callout_halt(&sc->sc_untap_callout, NULL); 2078 mutex_enter(&sc->sc_tap_mutex); 2079 tap_transition_initial(sc); 2080 mutex_exit(&sc->sc_tap_mutex); 2081 } 2082 2083 static const struct timeval zero_timeval; 2084 2085 static void 2086 tap_transition(struct uatp_softc *sc, enum uatp_tap_state tap_state, 2087 const struct timeval *start_time, 2088 unsigned int tapping_fingers, unsigned int tapped_fingers) 2089 { 2090 KASSERT(mutex_owned(&sc->sc_tap_mutex)); 2091 sc->sc_tap_state = tap_state; 2092 sc->sc_tap_timer = *start_time; 2093 sc->sc_tapping_fingers = tapping_fingers; 2094 sc->sc_tapped_fingers = tapped_fingers; 2095 } 2096 2097 static void 2098 tap_transition_initial(struct uatp_softc *sc) 2099 { 2100 /* 2101 * No checks. This state is always kosher, and sometimes a 2102 * fallback in case of failure. 2103 */ 2104 tap_transition(sc, TAP_STATE_INITIAL, &zero_timeval, 0, 0); 2105 } 2106 2107 /* Touch transitions */ 2108 2109 static void 2110 tap_transition_tapping(struct uatp_softc *sc, const struct timeval *start_time, 2111 unsigned int fingers) 2112 { 2113 CHECK((sc->sc_tapping_fingers <= fingers), 2114 do { tap_transition_initial(sc); return; } while (0)); 2115 tap_transition(sc, TAP_STATE_TAPPING, start_time, fingers, 0); 2116 } 2117 2118 static void 2119 tap_transition_double_tapping(struct uatp_softc *sc, 2120 const struct timeval *start_time, unsigned int fingers) 2121 { 2122 CHECK((sc->sc_tapping_fingers <= fingers), 2123 do { tap_transition_initial(sc); return; } while (0)); 2124 CHECK((0 < sc->sc_tapped_fingers), 2125 do { tap_transition_initial(sc); return; } while (0)); 2126 tap_transition(sc, TAP_STATE_DOUBLE_TAPPING, start_time, fingers, 2127 sc->sc_tapped_fingers); 2128 } 2129 2130 static void 2131 tap_transition_dragging_down(struct uatp_softc *sc) 2132 { 2133 CHECK((0 < sc->sc_tapped_fingers), 2134 do { tap_transition_initial(sc); return; } while (0)); 2135 tap_transition(sc, TAP_STATE_DRAGGING_DOWN, &zero_timeval, 0, 2136 sc->sc_tapped_fingers); 2137 } 2138 2139 static void 2140 tap_transition_tapping_in_drag(struct uatp_softc *sc, 2141 const struct timeval *start_time, unsigned int fingers) 2142 { 2143 CHECK((sc->sc_tapping_fingers <= fingers), 2144 do { tap_transition_initial(sc); return; } while (0)); 2145 CHECK((0 < sc->sc_tapped_fingers), 2146 do { tap_transition_initial(sc); return; } while (0)); 2147 tap_transition(sc, TAP_STATE_TAPPING_IN_DRAG, start_time, fingers, 2148 sc->sc_tapped_fingers); 2149 } 2150 2151 /* Release transitions */ 2152 2153 static void 2154 tap_transition_tapped(struct uatp_softc *sc, const struct timeval *start_time) 2155 { 2156 /* 2157 * The fingers that were tapping -- of which there must have 2158 * been at least one -- are now the fingers that have tapped, 2159 * and there are no longer fingers tapping. 2160 */ 2161 CHECK((0 < sc->sc_tapping_fingers), 2162 do { tap_transition_initial(sc); return; } while (0)); 2163 tap_transition(sc, TAP_STATE_TAPPED, start_time, 0, 2164 sc->sc_tapping_fingers); 2165 schedule_untap(sc); 2166 } 2167 2168 static void 2169 tap_transition_dragging_up(struct uatp_softc *sc) 2170 { 2171 CHECK((0 < sc->sc_tapped_fingers), 2172 do { tap_transition_initial(sc); return; } while (0)); 2173 tap_transition(sc, TAP_STATE_DRAGGING_UP, &zero_timeval, 0, 2174 sc->sc_tapped_fingers); 2175 } 2176 2177 static void 2178 tap_touched(struct uatp_softc *sc, unsigned int fingers) 2179 { 2180 struct timeval now, diff, limit; 2181 2182 CHECK((0 < fingers), return); 2183 callout_stop(&sc->sc_untap_callout); 2184 mutex_enter(&sc->sc_tap_mutex); 2185 TAP_DEBUG_PRE(sc); 2186 /* 2187 * Guarantee that the number of tapping fingers never decreases 2188 * except when it is reset to zero on release. 2189 */ 2190 if (fingers < sc->sc_tapping_fingers) 2191 fingers = sc->sc_tapping_fingers; 2192 switch (sc->sc_tap_state) { 2193 case TAP_STATE_INITIAL: 2194 getmicrouptime(&now); 2195 tap_transition_tapping(sc, &now, fingers); 2196 break; 2197 2198 case TAP_STATE_TAPPING: 2199 /* 2200 * Number of fingers may have increased, so transition 2201 * even though we're already in TAPPING. 2202 */ 2203 tap_transition_tapping(sc, &sc->sc_tap_timer, fingers); 2204 break; 2205 2206 case TAP_STATE_TAPPED: 2207 getmicrouptime(&now); 2208 /* 2209 * If the double-tap time limit has passed, it's the 2210 * callout's responsibility to handle that event, so we 2211 * assume the limit has not passed yet. 2212 */ 2213 tap_transition_double_tapping(sc, &now, fingers); 2214 break; 2215 2216 case TAP_STATE_DOUBLE_TAPPING: 2217 getmicrouptime(&now); 2218 timersub(&now, &sc->sc_tap_timer, &diff); 2219 uatp_tap_limit(sc, &limit); 2220 if (timercmp(&diff, &limit, >) || 2221 (sc->sc_track_distance > 2222 sc->sc_knobs.tap_track_distance_limit)) 2223 tap_transition_dragging_down(sc); 2224 break; 2225 2226 case TAP_STATE_DRAGGING_DOWN: 2227 break; 2228 2229 case TAP_STATE_DRAGGING_UP: 2230 getmicrouptime(&now); 2231 tap_transition_tapping_in_drag(sc, &now, fingers); 2232 break; 2233 2234 case TAP_STATE_TAPPING_IN_DRAG: 2235 /* 2236 * Number of fingers may have increased, so transition 2237 * even though we're already in TAPPING IN DRAG. 2238 */ 2239 tap_transition_tapping_in_drag(sc, &sc->sc_tap_timer, fingers); 2240 break; 2241 2242 default: 2243 aprint_error_dev(uatp_dev(sc), "%s: invalid tap state: %d\n", 2244 __func__, sc->sc_tap_state); 2245 tap_transition_initial(sc); 2246 break; 2247 } 2248 TAP_DEBUG_POST(sc); 2249 mutex_exit(&sc->sc_tap_mutex); 2250 } 2251 2252 static bool 2253 tap_released(struct uatp_softc *sc) 2254 { 2255 struct timeval now, diff, limit; 2256 void (*non_tapped_transition)(struct uatp_softc *); 2257 bool ok, temporary_release; 2258 2259 mutex_enter(&sc->sc_tap_mutex); 2260 TAP_DEBUG_PRE(sc); 2261 switch (sc->sc_tap_state) { 2262 case TAP_STATE_INITIAL: 2263 case TAP_STATE_TAPPED: 2264 case TAP_STATE_DRAGGING_UP: 2265 /* Spurious interrupt: fingers are already off. */ 2266 ok = false; 2267 break; 2268 2269 case TAP_STATE_TAPPING: 2270 temporary_release = false; 2271 non_tapped_transition = &tap_transition_initial; 2272 goto maybe_tap; 2273 2274 case TAP_STATE_DOUBLE_TAPPING: 2275 temporary_release = true; 2276 non_tapped_transition = &tap_transition_dragging_up; 2277 goto maybe_tap; 2278 2279 case TAP_STATE_TAPPING_IN_DRAG: 2280 temporary_release = false; 2281 non_tapped_transition = &tap_transition_dragging_up; 2282 goto maybe_tap; 2283 2284 maybe_tap: 2285 getmicrouptime(&now); 2286 timersub(&now, &sc->sc_tap_timer, &diff); 2287 uatp_tap_limit(sc, &limit); 2288 if (timercmp(&diff, &limit, <=) && 2289 (sc->sc_track_distance <= 2290 sc->sc_knobs.tap_track_distance_limit)) { 2291 if (temporary_release) { 2292 /* 2293 * XXX Kludge: Temporarily transition 2294 * to a tap state that uatp_input will 2295 * interpret as `no buttons tapped', 2296 * saving the tapping fingers. There 2297 * should instead be a separate routine 2298 * uatp_input_untapped. 2299 */ 2300 unsigned int fingers = sc->sc_tapping_fingers; 2301 tap_transition_initial(sc); 2302 uatp_input(sc, 0, 0, 0, 0, 0); 2303 sc->sc_tapping_fingers = fingers; 2304 } 2305 tap_transition_tapped(sc, &now); 2306 } else { 2307 (*non_tapped_transition)(sc); 2308 } 2309 ok = true; 2310 break; 2311 2312 case TAP_STATE_DRAGGING_DOWN: 2313 tap_transition_dragging_up(sc); 2314 ok = true; 2315 break; 2316 2317 default: 2318 aprint_error_dev(uatp_dev(sc), "%s: invalid tap state: %d\n", 2319 __func__, sc->sc_tap_state); 2320 tap_transition_initial(sc); 2321 ok = false; 2322 break; 2323 } 2324 TAP_DEBUG_POST(sc); 2325 mutex_exit(&sc->sc_tap_mutex); 2326 return ok; 2327 } 2328 2329 /* Untapping: Releasing the button after a tap */ 2330 2331 static void 2332 schedule_untap(struct uatp_softc *sc) 2333 { 2334 unsigned int ms = sc->sc_knobs.double_tap_limit_msec; 2335 if (ms <= 1000) 2336 callout_schedule(&sc->sc_untap_callout, mstohz(ms)); 2337 else /* XXX Reject bogus values in sysctl. */ 2338 aprint_error_dev(uatp_dev(sc), 2339 "double-tap delay too long: %ums\n", ms); 2340 } 2341 2342 static void 2343 untap_callout(void *arg) 2344 { 2345 struct uatp_softc *sc = arg; 2346 2347 mutex_enter(&sc->sc_tap_mutex); 2348 TAP_DEBUG_PRE(sc); 2349 switch (sc->sc_tap_state) { 2350 case TAP_STATE_TAPPED: 2351 tap_transition_initial(sc); 2352 /* 2353 * XXX Kludge: Call uatp_input after the state transition 2354 * to make sure that it will actually release the button. 2355 */ 2356 uatp_input(sc, 0, 0, 0, 0, 0); 2357 2358 case TAP_STATE_INITIAL: 2359 case TAP_STATE_TAPPING: 2360 case TAP_STATE_DOUBLE_TAPPING: 2361 case TAP_STATE_DRAGGING_UP: 2362 case TAP_STATE_DRAGGING_DOWN: 2363 case TAP_STATE_TAPPING_IN_DRAG: 2364 /* 2365 * Somebody else got in and changed the state before we 2366 * untapped. Let them take over; do nothing here. 2367 */ 2368 break; 2369 2370 default: 2371 aprint_error_dev(uatp_dev(sc), "%s: invalid tap state: %d\n", 2372 __func__, sc->sc_tap_state); 2373 tap_transition_initial(sc); 2374 /* XXX Just in case...? */ 2375 uatp_input(sc, 0, 0, 0, 0, 0); 2376 break; 2377 } 2378 TAP_DEBUG_POST(sc); 2379 mutex_exit(&sc->sc_tap_mutex); 2380 } 2381 2382 /* 2383 * Emulate different buttons if the user holds down n fingers while 2384 * pressing the physical button. (This is unrelated to tapping.) 2385 */ 2386 2387 static uint32_t 2388 emulated_buttons(struct uatp_softc *sc, unsigned int fingers) 2389 { 2390 CHECK((1 < fingers), return 0); 2391 2392 switch (fingers) { 2393 case 2: 2394 DPRINTF(sc, UATP_DEBUG_EMUL_BUTTON, 2395 ("2-finger emulated button: %"PRIx32"\n", 2396 sc->sc_knobs.two_finger_buttons)); 2397 return sc->sc_knobs.two_finger_buttons; 2398 2399 case 3: 2400 default: 2401 DPRINTF(sc, UATP_DEBUG_EMUL_BUTTON, 2402 ("3-finger emulated button: %"PRIx32"\n", 2403 sc->sc_knobs.three_finger_buttons)); 2404 return sc->sc_knobs.three_finger_buttons; 2405 } 2406 } 2407 2408 /* 2409 * Update the position known to the driver based on the position and 2410 * number of fingers. dx, dy, dz, and dw are expected to hold zero; 2411 * update_position may store nonzero changes in position in them. 2412 */ 2413 2414 static void 2415 update_position(struct uatp_softc *sc, unsigned int fingers, 2416 unsigned int x_raw, unsigned int y_raw, 2417 int *dx, int *dy, int *dz, int *dw) 2418 { 2419 CHECK((0 < fingers), return); 2420 2421 if ((fingers == 1) || (sc->sc_knobs.multifinger_track == 1)) 2422 move_mouse(sc, x_raw, y_raw, dx, dy); 2423 else if (sc->sc_knobs.multifinger_track == 2) 2424 scroll_wheel(sc, x_raw, y_raw, dz, dw); 2425 } 2426 2427 /* 2428 * XXX Scrolling needs to use a totally different motion model. 2429 */ 2430 2431 static void 2432 move_mouse(struct uatp_softc *sc, unsigned int x_raw, unsigned int y_raw, 2433 int *dx, int *dy) 2434 { 2435 move(sc, "mouse", x_raw, y_raw, &sc->sc_x_raw, &sc->sc_y_raw, 2436 &sc->sc_x_smoothed, &sc->sc_y_smoothed, 2437 &sc->sc_x_remainder, &sc->sc_y_remainder, 2438 dx, dy); 2439 } 2440 2441 static void 2442 scroll_wheel(struct uatp_softc *sc, unsigned int x_raw, unsigned int y_raw, 2443 int *dz, int *dw) 2444 { 2445 move(sc, "scroll", x_raw, y_raw, &sc->sc_z_raw, &sc->sc_w_raw, 2446 &sc->sc_z_smoothed, &sc->sc_w_smoothed, 2447 &sc->sc_z_remainder, &sc->sc_w_remainder, 2448 dz, dw); 2449 } 2450 2451 static void 2452 move(struct uatp_softc *sc, const char *ctx, unsigned int a, unsigned int b, 2453 int *a_raw, int *b_raw, 2454 int *a_smoothed, int *b_smoothed, 2455 unsigned int *a_remainder, unsigned int *b_remainder, 2456 int *da, int *db) 2457 { 2458 #define CHECK_(condition) CHECK(condition, return) 2459 2460 int old_a_raw = *a_raw, old_a_smoothed = *a_smoothed; 2461 int old_b_raw = *b_raw, old_b_smoothed = *b_smoothed; 2462 unsigned int a_dist, b_dist, dist_squared; 2463 bool a_fast, b_fast; 2464 2465 /* 2466 * Make sure the quadratics in motion_below_threshold and 2467 * tracking distance don't overflow int arithmetic. 2468 */ 2469 __CTASSERT(0x12000000 == (2 * UATP_MAX_POSITION * UATP_MAX_POSITION)); 2470 2471 CHECK_(a <= UATP_MAX_POSITION); 2472 CHECK_(b <= UATP_MAX_POSITION); 2473 *a_raw = a; 2474 *b_raw = b; 2475 if ((old_a_raw < 0) || (old_b_raw < 0)) { 2476 DPRINTF(sc, UATP_DEBUG_MOVE, 2477 ("initialize %s position (%d, %d) -> (%d, %d)\n", ctx, 2478 old_a_raw, old_b_raw, a, b)); 2479 return; 2480 } 2481 2482 if ((old_a_smoothed < 0) || (old_b_smoothed < 0)) { 2483 /* XXX Does this make sense? */ 2484 old_a_smoothed = old_a_raw; 2485 old_b_smoothed = old_b_raw; 2486 } 2487 2488 CHECK_(0 <= old_a_raw); 2489 CHECK_(0 <= old_b_raw); 2490 CHECK_(old_a_raw <= UATP_MAX_POSITION); 2491 CHECK_(old_b_raw <= UATP_MAX_POSITION); 2492 CHECK_(0 <= old_a_smoothed); 2493 CHECK_(0 <= old_b_smoothed); 2494 CHECK_(old_a_smoothed <= UATP_MAX_POSITION); 2495 CHECK_(old_b_smoothed <= UATP_MAX_POSITION); 2496 CHECK_(0 <= *a_raw); 2497 CHECK_(0 <= *b_raw); 2498 CHECK_(*a_raw <= UATP_MAX_POSITION); 2499 CHECK_(*b_raw <= UATP_MAX_POSITION); 2500 *a_smoothed = smooth(sc, old_a_raw, old_a_smoothed, *a_raw); 2501 *b_smoothed = smooth(sc, old_b_raw, old_b_smoothed, *b_raw); 2502 CHECK_(0 <= *a_smoothed); 2503 CHECK_(0 <= *b_smoothed); 2504 CHECK_(*a_smoothed <= UATP_MAX_POSITION); 2505 CHECK_(*b_smoothed <= UATP_MAX_POSITION); 2506 2507 if (sc->sc_motion_timer < sc->sc_knobs.motion_delay) { 2508 DPRINTF(sc, UATP_DEBUG_MOVE, ("delay motion %u\n", 2509 sc->sc_motion_timer)); 2510 sc->sc_motion_timer += 1; 2511 return; 2512 } 2513 2514 /* XXX Use raw distances or smoothed distances? Acceleration? */ 2515 if (*a_smoothed < old_a_smoothed) 2516 a_dist = old_a_smoothed - *a_smoothed; 2517 else 2518 a_dist = *a_smoothed - old_a_smoothed; 2519 2520 if (*b_smoothed < old_b_smoothed) 2521 b_dist = old_b_smoothed - *b_smoothed; 2522 else 2523 b_dist = *b_smoothed - old_b_smoothed; 2524 2525 dist_squared = (a_dist * a_dist) + (b_dist * b_dist); 2526 if (dist_squared < ((2 * UATP_MAX_POSITION * UATP_MAX_POSITION) 2527 - sc->sc_track_distance)) 2528 sc->sc_track_distance += dist_squared; 2529 else 2530 sc->sc_track_distance = (2 * UATP_MAX_POSITION * 2531 UATP_MAX_POSITION); 2532 DPRINTF(sc, UATP_DEBUG_TRACK_DIST, ("finger has tracked %u units^2\n", 2533 sc->sc_track_distance)); 2534 2535 /* 2536 * The checks above guarantee that the differences here are at 2537 * most UATP_MAX_POSITION in magnitude, since both minuend and 2538 * subtrahend are nonnegative and at most UATP_MAX_POSITION. 2539 */ 2540 if (motion_below_threshold(sc, sc->sc_knobs.motion_threshold, 2541 (int)(*a_smoothed - old_a_smoothed), 2542 (int)(*b_smoothed - old_b_smoothed))) { 2543 DPRINTF(sc, UATP_DEBUG_MOVE, 2544 ("%s motion too small: (%d, %d) -> (%d, %d)\n", ctx, 2545 old_a_smoothed, old_b_smoothed, 2546 *a_smoothed, *b_smoothed)); 2547 return; 2548 } 2549 if (sc->sc_knobs.fast_per_direction == 0) { 2550 a_fast = b_fast = !motion_below_threshold(sc, 2551 sc->sc_knobs.fast_motion_threshold, 2552 (int)(*a_smoothed - old_a_smoothed), 2553 (int)(*b_smoothed - old_b_smoothed)); 2554 } else { 2555 a_fast = !motion_below_threshold(sc, 2556 sc->sc_knobs.fast_motion_threshold, 2557 (int)(*a_smoothed - old_a_smoothed), 2558 0); 2559 b_fast = !motion_below_threshold(sc, 2560 sc->sc_knobs.fast_motion_threshold, 2561 0, 2562 (int)(*b_smoothed - old_b_smoothed)); 2563 } 2564 *da = accelerate(sc, old_a_raw, *a_raw, old_a_smoothed, *a_smoothed, 2565 a_fast, a_remainder); 2566 *db = accelerate(sc, old_b_raw, *b_raw, old_b_smoothed, *b_smoothed, 2567 b_fast, b_remainder); 2568 DPRINTF(sc, UATP_DEBUG_MOVE, 2569 ("update %s position (%d, %d) -> (%d, %d), move by (%d, %d)\n", 2570 ctx, old_a_smoothed, old_b_smoothed, *a_smoothed, *b_smoothed, 2571 *da, *db)); 2572 2573 #undef CHECK_ 2574 } 2575 2576 static int 2577 smooth(struct uatp_softc *sc, unsigned int old_raw, unsigned int old_smoothed, 2578 unsigned int raw) 2579 { 2580 #define CHECK_(condition) CHECK(condition, return old_raw) 2581 2582 /* 2583 * Arithmetic bounds: 2584 * . the weights are at most UATP_MAX_WEIGHT; 2585 * . the positions are at most UATP_MAX_POSITION; and so 2586 * . the numerator of the average is at most 2587 * 3 * UATP_MAX_WEIGHT * UATP_MAX_POSITION, 2588 * which is #x477000, fitting comfortably in an int. 2589 */ 2590 __CTASSERT(0x477000 == (3 * UATP_MAX_WEIGHT * UATP_MAX_POSITION)); 2591 unsigned int old_raw_weight = uatp_old_raw_weight(sc); 2592 unsigned int old_smoothed_weight = uatp_old_smoothed_weight(sc); 2593 unsigned int new_raw_weight = uatp_new_raw_weight(sc); 2594 CHECK_(old_raw_weight <= UATP_MAX_WEIGHT); 2595 CHECK_(old_smoothed_weight <= UATP_MAX_WEIGHT); 2596 CHECK_(new_raw_weight <= UATP_MAX_WEIGHT); 2597 CHECK_(old_raw <= UATP_MAX_POSITION); 2598 CHECK_(old_smoothed <= UATP_MAX_POSITION); 2599 CHECK_(raw <= UATP_MAX_POSITION); 2600 return (((old_raw_weight * old_raw) + 2601 (old_smoothed_weight * old_smoothed) + 2602 (new_raw_weight * raw)) 2603 / (old_raw_weight + old_smoothed_weight + new_raw_weight)); 2604 2605 #undef CHECK_ 2606 } 2607 2608 static bool 2609 motion_below_threshold(struct uatp_softc *sc, unsigned int threshold, 2610 int x, int y) 2611 { 2612 unsigned int x_squared, y_squared; 2613 2614 /* Caller guarantees the multiplication will not overflow. */ 2615 KASSERT(-UATP_MAX_POSITION <= x); 2616 KASSERT(-UATP_MAX_POSITION <= y); 2617 KASSERT(x <= UATP_MAX_POSITION); 2618 KASSERT(y <= UATP_MAX_POSITION); 2619 __CTASSERT(0x12000000 == (2 * UATP_MAX_POSITION * UATP_MAX_POSITION)); 2620 2621 x_squared = (x * x); 2622 y_squared = (y * y); 2623 2624 return (x_squared + y_squared) < threshold; 2625 } 2626 2627 static int 2628 accelerate(struct uatp_softc *sc, unsigned int old_raw, unsigned int raw, 2629 unsigned int old_smoothed, unsigned int smoothed, bool fast, 2630 int *remainder) 2631 { 2632 #define CHECK_(condition) CHECK(condition, return 0) 2633 2634 /* Guarantee that the scaling won't overflow. */ 2635 __CTASSERT(0x30000 == 2636 (UATP_MAX_POSITION * UATP_MAX_MOTION_MULTIPLIER)); 2637 2638 CHECK_(old_raw <= UATP_MAX_POSITION); 2639 CHECK_(raw <= UATP_MAX_POSITION); 2640 CHECK_(old_smoothed <= UATP_MAX_POSITION); 2641 CHECK_(smoothed <= UATP_MAX_POSITION); 2642 2643 return (fast ? uatp_scale_fast_motion : uatp_scale_motion) 2644 (sc, (((int) smoothed) - ((int) old_smoothed)), remainder); 2645 2646 #undef CHECK_ 2647 } 2648 2649 MODULE(MODULE_CLASS_DRIVER, uatp, NULL); 2650 2651 #ifdef _MODULE 2652 #include "ioconf.c" 2653 #endif 2654 2655 static int 2656 uatp_modcmd(modcmd_t cmd, void *aux) 2657 { 2658 int error = 0; 2659 2660 switch (cmd) { 2661 case MODULE_CMD_INIT: 2662 #ifdef _MODULE 2663 error = config_init_component(cfdriver_ioconf_uatp, 2664 cfattach_ioconf_uatp, cfdata_ioconf_uatp); 2665 #endif 2666 return error; 2667 case MODULE_CMD_FINI: 2668 #ifdef _MODULE 2669 error = config_fini_component(cfdriver_ioconf_uatp, 2670 cfattach_ioconf_uatp, cfdata_ioconf_uatp); 2671 #endif 2672 return error; 2673 default: 2674 return ENOTTY; 2675 } 2676 } 2677
Indexes created Sun Sep 21 19:09:51 GMT 2025