1 /* $NetBSD: if_dse.c,v 1.9 2025/05/23 09:12:51 nat Exp $ */ 2 3 /* 4 * Driver for DaynaPORT SCSI/Link SCSI-Ethernet 5 * 6 * Written by Hiroshi Noguchi <ngc (at) ff.iij4u.or.jp> 7 * 8 * Modified by Matt Sandstrom <mattias (at) beauty.se> for NetBSD 1.5.3 9 * 10 * This driver is written based on "if_se.c". 11 */ 12 13 /* 14 * Copyright (c) 1997 Ian W. Dall <ian.dall (at) dsto.defence.gov.au> 15 * All rights reserved. 16 * 17 * Redistribution and use in source and binary forms, with or without 18 * modification, are permitted provided that the following conditions 19 * are met: 20 * 1. Redistributions of source code must retain the above copyright 21 * notice, this list of conditions and the following disclaimer. 22 * 2. Redistributions in binary form must reproduce the above copyright 23 * notice, this list of conditions and the following disclaimer in the 24 * documentation and/or other materials provided with the distribution. 25 * 3. All advertising materials mentioning features or use of this software 26 * must display the following acknowledgement: 27 * This product includes software developed by Ian W. Dall. 28 * 4. The name of the author may not be used to endorse or promote products 29 * derived from this software without specific prior written permission. 30 * 31 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 32 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 33 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 34 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 35 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 36 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 37 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 38 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 39 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 40 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 41 */ 42 43 #include "opt_inet.h" 44 #include "opt_atalk.h" 45 46 #include <sys/types.h> 47 #include <sys/param.h> 48 #include <sys/systm.h> 49 #include <sys/callout.h> 50 #include <sys/syslog.h> 51 #include <sys/kernel.h> 52 #include <sys/file.h> 53 #include <sys/stat.h> 54 #include <sys/ioctl.h> 55 #include <sys/buf.h> 56 #include <sys/uio.h> 57 #include <sys/malloc.h> 58 #include <sys/errno.h> 59 #include <sys/device.h> 60 #include <sys/disklabel.h> 61 #include <sys/disk.h> 62 #include <sys/proc.h> 63 #include <sys/conf.h> 64 65 #include <sys/workqueue.h> 66 67 #include <dev/scsipi/scsipi_all.h> 68 #include <dev/scsipi/scsiconf.h> 69 70 #include <sys/mbuf.h> 71 72 #include <sys/socket.h> 73 #include <net/if.h> 74 #include <net/if_dl.h> 75 #include <net/if_ether.h> 76 #include <net/if_media.h> 77 78 #ifdef INET 79 #include <netinet/in.h> 80 #include <netinet/if_inarp.h> 81 #endif 82 83 #ifdef NETATALK 84 #include <netatalk/at.h> 85 #endif 86 87 #include <net/bpf.h> 88 89 90 /* 91 * debug flag 92 */ 93 #if 0 94 #define DSE_DEBUG 95 #endif 96 97 98 #define DSE_TIMEOUT 100000 99 #define DSE_OUTSTANDING 4 100 #define DSE_RETRIES 4 101 #define DSE_MINSIZE 60 102 103 #define DSE_HEADER_TX 4 104 #define DSE_TAIL_TX 4 105 #define DSE_EXTRAS_TX (DSE_HEADER_TX + DSE_TAIL_TX) 106 107 #define DSE_HEADER_RX 6 108 #define DSE_TAIL_RX 0 109 #define DSE_EXTRAS_RX (DSE_HEADER_RX + DSE_TAIL_RX) 110 111 #define MAX_BYTES_RX (ETHERMTU + sizeof(struct ether_header) + ETHER_CRC_LEN) 112 113 /* 10 full length packets appears to be the max ever returned. 16k is OK */ 114 #define RBUF_LEN (16 * 1024) 115 116 /* 117 * Tuning parameters: 118 * We will attempt to adapt to polling fast enough to get RDATA_GOAL packets 119 * per read 120 */ 121 #define RDATA_MAX 10 /* maximum of returned packets (guessed) */ 122 #define RDATA_GOAL 8 123 124 /* 125 * maximum of available multicast address entries (guessed) 126 */ 127 #define DSE_MCAST_MAX 10 128 129 130 /* dse_poll and dse_poll0 are the normal polling rate and the minimum 131 * polling rate respectively. dse_poll0 should be chosen so that at 132 * maximum ethernet speed, we will read nearly RDATA_MAX packets. dse_poll 133 * should be chosen for reasonable maximum latency. 134 * In practice, if we are being saturated with min length packets, we 135 * can't poll fast enough. Polling with zero delay actually 136 * worsens performance. dse_poll0 is enforced to be always at least 1 137 */ 138 #if MAC68K_DEBUG 139 #define DSE_POLL 50 /* default in milliseconds */ 140 #define DSE_POLL0 30 /* default in milliseconds */ 141 #else 142 #define DSE_POLL 80 /* default in milliseconds */ 143 #define DSE_POLL0 40 /* default in milliseconds */ 144 #endif 145 int dse_poll = 0; /* Delay in ticks set at attach time */ 146 int dse_poll0 = 0; 147 int dse_max_received = 0; /* Instrumentation */ 148 149 150 151 152 /*========================================== 153 data type defs 154 ==========================================*/ 155 typedef struct scsipi_inquiry_data dayna_ether_inquiry_data; 156 157 typedef struct { 158 uint8_t opcode[2]; 159 uint8_t byte3; 160 uint8_t length[2]; 161 uint8_t byte6; 162 } scsi_dayna_ether_generic; 163 164 #define DAYNA_CMD_SEND 0x0A /* same as generic "Write" */ 165 #define DAYNA_CMD_RECV 0x08 /* same as generic "Read" */ 166 167 #define DAYNA_CMD_GET_ADDR 0x09 /* ???: read MAC address ? */ 168 #define REQ_LEN_GET_ADDR 0x12 169 170 #define DAYNA_CMD_SET_MULTI 0x0D /* set multicast address */ 171 172 #define DAYNA_CMD_VENDOR1 0x0E /* ???: initialize signal ? */ 173 174 #define IS_SEND(generic) ((generic)->opcode == DAYNA_CMD_SEND) 175 #define IS_RECV(generic) ((generic)->opcode == DAYNA_CMD_RECV) 176 177 struct dse_softc { 178 device_t sc_dev; 179 struct ethercom sc_ethercom; /* Ethernet common part */ 180 struct scsipi_periph *sc_periph;/* contains our targ, lun, etc. */ 181 182 struct callout sc_recv_ch; 183 struct kmutex sc_iflock; 184 struct if_percpuq *sc_ipq; 185 struct workqueue *sc_recv_wq, *sc_send_wq; 186 struct work sc_recv_work, sc_send_work; 187 int sc_recv_work_pending, sc_send_work_pending; 188 189 char *sc_tbuf; 190 char *sc_rbuf; 191 int sc_debug; 192 int sc_flags; 193 int sc_last_timeout; 194 int sc_enabled; 195 int sc_attach_state; 196 }; 197 198 /* bit defs of "sc_flags" */ 199 #define DSE_NEED_RECV 0x1 200 201 static int dsematch(device_t, cfdata_t, void *); 202 static void dseattach(device_t, device_t, void *); 203 static int dsedetach(device_t, int); 204 205 static void dse_ifstart(struct ifnet *); 206 static void dse_send_worker(struct work *wk, void *cookie); 207 208 static void dsedone(struct scsipi_xfer *, int); 209 static int dse_ioctl(struct ifnet *, u_long, void *); 210 static void dsewatchdog(struct ifnet *); 211 212 static void dse_recv_callout(void *); 213 static void dse_recv_worker(struct work *wk, void *cookie); 214 static void dse_recv(struct dse_softc *); 215 static struct mbuf* dse_get(struct dse_softc *, uint8_t *, int); 216 static int dse_read(struct dse_softc *, uint8_t *, int); 217 218 static int dse_init_adaptor(struct dse_softc *); 219 static int dse_get_addr(struct dse_softc *, uint8_t *); 220 static int dse_set_multi(struct dse_softc *); 221 222 static int dse_reset(struct dse_softc *); 223 224 #if 0 /* 07/16/2000 comment-out */ 225 static int dse_set_mode(struct dse_softc *, int, int); 226 #endif 227 static int dse_init(struct dse_softc *); 228 static void dse_stop(struct dse_softc *); 229 230 #if 0 231 static __inline uint16_t ether_cmp(void *, void *); 232 #endif 233 234 static inline int dse_scsipi_cmd(struct scsipi_periph *periph, 235 struct scsipi_generic *scsipi_cmd, 236 int cmdlen, u_char *data_addr, int datalen, 237 int retries, int timeout, struct buf *bp, 238 int flags); 239 240 int dse_enable(struct dse_softc *); 241 void dse_disable(struct dse_softc *); 242 243 244 CFATTACH_DECL_NEW(dse, sizeof(struct dse_softc), 245 dsematch, dseattach, dsedetach, NULL); 246 247 extern struct cfdriver dse_cd; 248 249 dev_type_open(dseopen); 250 dev_type_close(dseclose); 251 dev_type_ioctl(dseioctl); 252 253 const struct cdevsw dse_cdevsw = { 254 .d_open = dseopen, 255 .d_close = dseclose, 256 .d_read = noread, 257 .d_write = nowrite, 258 .d_ioctl = dseioctl, 259 .d_stop = nostop, 260 .d_tty = notty, 261 .d_poll = nopoll, 262 .d_mmap = nommap, 263 .d_kqfilter = nokqfilter, 264 .d_discard = nodiscard, 265 .d_flag = D_OTHER | D_MPSAFE 266 }; 267 268 const struct scsipi_periphsw dse_switch = { 269 270 NULL, /* Use default error handler */ 271 NULL, /* have no queue */ 272 NULL, /* have no async handler */ 273 dsedone, /* deal with stats at interrupt time */ 274 }; 275 276 struct scsipi_inquiry_pattern dse_patterns[] = { 277 { T_PROCESSOR, T_FIXED, 278 "Dayna", "SCSI/Link", "" }, 279 }; 280 281 282 283 /*==================================================== 284 definitions for SCSI commands 285 ====================================================*/ 286 287 /* 288 * command templates 289 */ 290 /* unknown commands */ 291 /* Vendor #1 */ 292 static const scsi_dayna_ether_generic sonic_ether_vendor1 = { 293 { DAYNA_CMD_VENDOR1, 0x00 }, 294 0x00, 295 { 0x00, 0x00 }, 296 0x80 297 }; 298 299 300 301 #if 0 302 /* 303 * Compare two Ether/802 addresses for equality, inlined and 304 * unrolled for speed. 305 * Note: use this like memcmp() 306 */ 307 static __inline uint16_t 308 ether_cmp(void *one, void *two) 309 { 310 uint16_t* a; 311 uint16_t* b; 312 uint16_t diff; 313 314 a = (uint16_t *) one; 315 b = (uint16_t *) two; 316 317 diff = (a[0] - b[0]) | (a[1] - b[1]) | (a[2] - b[2]); 318 319 return (diff); 320 } 321 322 #define ETHER_CMP ether_cmp 323 #endif 324 325 /* 326 * check to match with SCSI inquiry information 327 */ 328 static int 329 dsematch(device_t parent, cfdata_t match, void *aux) 330 { 331 struct scsipibus_attach_args *sa = aux; 332 int priority; 333 334 (void)scsipi_inqmatch(&sa->sa_inqbuf, 335 dse_patterns, sizeof(dse_patterns) / sizeof(dse_patterns[0]), 336 sizeof(dse_patterns[0]), &priority); 337 return priority; 338 } 339 340 341 /* 342 * The routine called by the low level scsi routine when it discovers 343 * a device suitable for this driver. 344 */ 345 static void 346 dseattach(device_t parent, device_t self, void *aux) 347 { 348 struct dse_softc *sc = device_private(self); 349 struct scsipibus_attach_args *sa = aux; 350 struct scsipi_periph *periph = sa->sa_periph; 351 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 352 uint8_t myaddr[ETHER_ADDR_LEN]; 353 char wqname[MAXCOMLEN]; 354 int rv; 355 356 sc->sc_dev = self; 357 358 aprint_normal("\n"); 359 SC_DEBUG(periph, SCSIPI_DB2, ("dseattach: ")); 360 361 sc->sc_attach_state = 0; 362 callout_init(&sc->sc_recv_ch, CALLOUT_MPSAFE); 363 callout_setfunc(&sc->sc_recv_ch, dse_recv_callout, (void *)sc); 364 mutex_init(&sc->sc_iflock, MUTEX_DEFAULT, IPL_SOFTNET); 365 366 /* 367 * Store information needed to contact our base driver 368 */ 369 sc->sc_periph = periph; 370 periph->periph_dev = sc->sc_dev; 371 periph->periph_switch = &dse_switch; 372 #if 0 373 sc_periph->sc_link_dbflags = SCSIPI_DB1; 374 #endif 375 376 dse_poll = mstohz(DSE_POLL); 377 dse_poll = dse_poll? dse_poll: 1; 378 dse_poll0 = mstohz(DSE_POLL0); 379 dse_poll0 = dse_poll0? dse_poll0: 1; 380 381 /* 382 * Initialize and attach send and receive buffers 383 */ 384 sc->sc_tbuf = malloc(ETHERMTU + sizeof(struct ether_header) + 385 DSE_EXTRAS_TX + 16, M_DEVBUF, M_WAITOK); 386 387 sc->sc_rbuf = malloc(RBUF_LEN + 16, M_DEVBUF, M_WAITOK); 388 389 /* initialize adaptor and obtain MAC address */ 390 dse_init_adaptor(sc); 391 sc->sc_attach_state = 1; 392 393 /* Initialize ifnet structure. */ 394 strcpy(ifp->if_xname, device_xname(sc->sc_dev)); 395 ifp->if_softc = sc; 396 ifp->if_start = dse_ifstart; 397 ifp->if_ioctl = dse_ioctl; 398 ifp->if_watchdog = dsewatchdog; 399 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 400 ifp->if_extflags = IFEF_MPSAFE; 401 402 dse_get_addr(sc, myaddr); 403 404 /* Attach the interface. */ 405 if_initialize(ifp); 406 407 snprintf(wqname, sizeof(wqname), "%sRx", device_xname(sc->sc_dev)); 408 rv = workqueue_create(&sc->sc_recv_wq, wqname, dse_recv_worker, sc, 409 PRI_SOFTNET, IPL_NET, WQ_MPSAFE); 410 if (rv != 0) { 411 aprint_error_dev(sc->sc_dev, 412 "unable to create recv Rx workqueue\n"); 413 dsedetach(sc->sc_dev, 0); 414 return; /* Error */ 415 } 416 sc->sc_recv_work_pending = false; 417 sc->sc_attach_state = 2; 418 419 snprintf(wqname, sizeof(wqname), "%sTx", device_xname(sc->sc_dev)); 420 rv = workqueue_create(&sc->sc_send_wq, wqname, dse_send_worker, ifp, 421 PRI_SOFTNET, IPL_NET, WQ_MPSAFE); 422 if (rv != 0) { 423 aprint_error_dev(sc->sc_dev, 424 "unable to create send Tx workqueue\n"); 425 dsedetach(sc->sc_dev, 0); 426 return; /* Error */ 427 } 428 sc->sc_send_work_pending = false; 429 sc->sc_ipq = if_percpuq_create(&sc->sc_ethercom.ec_if); 430 ether_ifattach(ifp, myaddr); 431 if_register(ifp); 432 sc->sc_attach_state = 4; 433 434 bpf_attach(ifp, DLT_EN10MB, sizeof(struct ether_header)); 435 } 436 437 static int 438 dsedetach(device_t self, int flags) 439 { 440 struct dse_softc *sc = device_private(self); 441 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 442 443 switch(sc->sc_attach_state) { 444 case 4: 445 dse_stop(sc); 446 mutex_enter(&sc->sc_iflock); 447 ifp->if_flags &= ~IFF_RUNNING; 448 dse_disable(sc); 449 ether_ifdetach(ifp); 450 if_detach(ifp); 451 mutex_exit(&sc->sc_iflock); 452 if_percpuq_destroy(sc->sc_ipq); 453 /*FALLTHROUGH*/ 454 case 3: 455 workqueue_destroy(sc->sc_send_wq); 456 /*FALLTHROUGH*/ 457 case 2: 458 workqueue_destroy(sc->sc_recv_wq); 459 /*FALLTHROUGH*/ 460 case 1: 461 free(sc->sc_rbuf, M_DEVBUF); 462 free(sc->sc_tbuf, M_DEVBUF); 463 callout_destroy(&sc->sc_recv_ch); 464 mutex_destroy(&sc->sc_iflock); 465 break; 466 default: 467 aprint_error_dev(sc->sc_dev, "detach failed (state %d)\n", 468 sc->sc_attach_state); 469 return 1; 470 break; 471 } 472 473 return 0; 474 } 475 476 477 /* 478 * submit SCSI command 479 */ 480 static __inline int 481 dse_scsipi_cmd(struct scsipi_periph *periph, struct scsipi_generic *cmd, 482 int cmdlen, u_char *data_addr, int datalen, int retries, int timeout, 483 struct buf *bp, int flags) 484 { 485 int error = 0; 486 487 error = scsipi_command(periph, cmd, cmdlen, data_addr, 488 datalen, retries, timeout, bp, flags); 489 490 return error; 491 } 492 493 494 /* 495 * Start routine for calling from network sub system 496 */ 497 static void 498 dse_ifstart(struct ifnet *ifp) 499 { 500 struct dse_softc *sc = ifp->if_softc; 501 502 mutex_enter(&sc->sc_iflock); 503 if (!sc->sc_send_work_pending) { 504 sc->sc_send_work_pending = true; 505 workqueue_enqueue(sc->sc_send_wq, &sc->sc_send_work, NULL); 506 } 507 mutex_exit(&sc->sc_iflock); 508 if (sc->sc_flags & DSE_NEED_RECV) { 509 sc->sc_flags &= ~DSE_NEED_RECV; 510 } 511 } 512 513 /* 514 * Invoke the transmit workqueue and transmission on the interface. 515 */ 516 static void 517 dse_send_worker(struct work *wk, void *cookie) 518 { 519 struct ifnet *ifp = cookie; 520 struct dse_softc *sc = ifp->if_softc; 521 scsi_dayna_ether_generic cmd_send; 522 struct mbuf *m, *m0; 523 int len, error; 524 u_char *cp; 525 526 mutex_enter(&sc->sc_iflock); 527 sc->sc_send_work_pending = false; 528 mutex_exit(&sc->sc_iflock); 529 530 KASSERT(if_is_mpsafe(ifp)); 531 532 /* Don't transmit if interface is busy or not running */ 533 if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) 534 return; 535 536 while (1) { 537 IFQ_DEQUEUE(&ifp->if_snd, m0); 538 if (m0 == NULL) 539 break; 540 /* If BPF is listening on this interface, let it see the 541 * packet before we commit it to the wire. 542 */ 543 bpf_mtap(ifp, m0, BPF_D_OUT); 544 545 /* We need to use m->m_pkthdr.len, so require the header */ 546 if ((m0->m_flags & M_PKTHDR) == 0) 547 panic("ctscstart: no header mbuf"); 548 len = m0->m_pkthdr.len; 549 550 /* Mark the interface busy. */ 551 ifp->if_flags |= IFF_OACTIVE; 552 553 /* Chain; copy into linear buffer allocated at attach time. */ 554 cp = sc->sc_tbuf; 555 for (m = m0; m != NULL; ) { 556 memcpy(cp, mtod(m, u_char *), m->m_len); 557 cp += m->m_len; 558 m = m0 = m_free(m); 559 } 560 if (len < DSE_MINSIZE) { 561 #ifdef DSE_DEBUG 562 if (sc->sc_debug) 563 aprint_error_dev(sc->sc_dev, 564 "packet size %d (%zu) < %d\n", len, 565 cp - (u_char *)sc->sc_tbuf, DSE_MINSIZE); 566 #endif 567 memset(cp, 0, DSE_MINSIZE - len); 568 len = DSE_MINSIZE; 569 } 570 571 /* Fill out SCSI command. */ 572 memset(&cmd_send, 0, sizeof(cmd_send)); 573 cmd_send.opcode[0] = DAYNA_CMD_SEND; 574 _lto2b(len, &(cmd_send.length[0])); 575 cmd_send.byte6 = 0x00; 576 577 /* Send command to device. */ 578 error = dse_scsipi_cmd(sc->sc_periph, 579 (void *)&cmd_send, sizeof(cmd_send), 580 sc->sc_tbuf, len, DSE_RETRIES, 581 DSE_TIMEOUT, NULL, XS_CTL_NOSLEEP | XS_CTL_DATA_OUT); 582 if (error) { 583 aprint_error_dev(sc->sc_dev, 584 "not queued, error %d\n", error); 585 if_statinc(ifp, if_oerrors); 586 ifp->if_flags &= ~IFF_OACTIVE; 587 } else 588 if_statinc(ifp, if_opackets); 589 } 590 } 591 592 593 /* 594 * Called from the scsibus layer via our scsi device switch. 595 */ 596 static void 597 dsedone(struct scsipi_xfer *xs, int error) 598 { 599 struct dse_softc *sc = device_private(xs->xs_periph->periph_dev); 600 struct scsipi_generic *cmd = xs->cmd; 601 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 602 603 if (IS_SEND(cmd)) { 604 ifp->if_flags &= ~IFF_OACTIVE; 605 } else if (IS_RECV(cmd)) { 606 /* RECV complete */ 607 /* pass data up. reschedule a recv */ 608 /* scsipi_free_xs will call start. Harmless. */ 609 610 if (error) { 611 /* Reschedule after a delay */ 612 callout_schedule(&sc->sc_recv_ch, dse_poll); 613 } else { 614 int n, ntimeo; 615 n = dse_read(sc, xs->data, xs->datalen - xs->resid); 616 if (n > dse_max_received) 617 dse_max_received = n; 618 if (n == 0) 619 ntimeo = dse_poll; 620 else if (n >= RDATA_MAX) 621 ntimeo = dse_poll0; 622 else if (n >= dse_max_received) 623 ntimeo = 0; 624 else { 625 ntimeo = sc->sc_last_timeout; 626 ntimeo = (ntimeo * RDATA_GOAL)/n; 627 ntimeo = (ntimeo < dse_poll0? 628 dse_poll0: ntimeo); 629 ntimeo = (ntimeo > dse_poll? 630 dse_poll: ntimeo); 631 } 632 sc->sc_last_timeout = ntimeo; 633 callout_schedule(&sc->sc_recv_ch, ntimeo); 634 } 635 } 636 } 637 638 639 /* 640 * Setup a receive command by queuing the work. 641 * Usually called from a callout, but also from se_init(). 642 */ 643 static void 644 dse_recv_callout(void *v) 645 { 646 /* do a recv command */ 647 struct dse_softc *sc = (struct dse_softc *) v; 648 649 if (sc->sc_enabled == 0) 650 return; 651 652 mutex_enter(&sc->sc_iflock); 653 if (sc->sc_recv_work_pending == true) { 654 callout_schedule(&sc->sc_recv_ch, dse_poll); 655 mutex_exit(&sc->sc_iflock); 656 return; 657 } 658 659 sc->sc_recv_work_pending = true; 660 workqueue_enqueue(sc->sc_recv_wq, &sc->sc_recv_work, NULL); 661 mutex_exit(&sc->sc_iflock); 662 } 663 664 /* 665 * Invoke the receive workqueue 666 */ 667 static void 668 dse_recv_worker(struct work *wk, void *cookie) 669 { 670 struct dse_softc *sc = (struct dse_softc *) cookie; 671 672 dse_recv(sc); 673 mutex_enter(&sc->sc_iflock); 674 sc->sc_recv_work_pending = false; 675 mutex_exit(&sc->sc_iflock); 676 677 } 678 679 /* 680 * Do the actual work of receiving data. 681 */ 682 static void 683 dse_recv(struct dse_softc *sc) 684 { 685 scsi_dayna_ether_generic cmd_recv; 686 int error, len; 687 688 /* do a recv command */ 689 /* fill out command buffer */ 690 memset(&cmd_recv, 0, sizeof(cmd_recv)); 691 cmd_recv.opcode[0] = DAYNA_CMD_RECV; 692 len = MAX_BYTES_RX + DSE_EXTRAS_RX; 693 _lto2b(len, &(cmd_recv.length[0])); 694 cmd_recv.byte6 = 0xC0; 695 696 error = dse_scsipi_cmd(sc->sc_periph, 697 (void *)&cmd_recv, sizeof(cmd_recv), 698 sc->sc_rbuf, RBUF_LEN, DSE_RETRIES, DSE_TIMEOUT, NULL, 699 XS_CTL_NOSLEEP | XS_CTL_POLL | XS_CTL_DATA_IN); 700 if (error) 701 callout_schedule(&sc->sc_recv_ch, dse_poll); 702 } 703 704 705 /* 706 * We copy the data into mbufs. When full cluster sized units are present 707 * we copy into clusters. 708 */ 709 static struct mbuf * 710 dse_get(struct dse_softc *sc, uint8_t *data, int totlen) 711 { 712 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 713 struct mbuf *m, *m0, *newm; 714 int len; 715 716 MGETHDR(m0, M_DONTWAIT, MT_DATA); 717 if (m0 == NULL) 718 return NULL; 719 720 m_set_rcvif(m0, ifp); 721 m0->m_pkthdr.len = totlen; 722 len = MHLEN; 723 m = m0; 724 725 while (totlen > 0) { 726 if (totlen >= MINCLSIZE) { 727 MCLGET(m, M_DONTWAIT); 728 if((m->m_flags & M_EXT) == 0) 729 goto bad; 730 731 len = MCLBYTES; 732 } 733 734 if (m == m0) { 735 char *newdata = (char *) 736 ALIGN(m->m_data + sizeof(struct ether_header)) - 737 sizeof(struct ether_header); 738 len -= newdata - m->m_data; 739 m->m_data = newdata; 740 } 741 742 m->m_len = len = uimin(totlen, len); 743 memcpy(mtod(m, void *), data, len); 744 data += len; 745 746 totlen -= len; 747 if (totlen > 0) { 748 MGET(newm, M_DONTWAIT, MT_DATA); 749 if (newm == NULL) 750 goto bad; 751 752 len = MLEN; 753 m = m->m_next = newm; 754 } 755 } 756 757 return m0; 758 759 bad: 760 m_freem(m0); 761 return NULL ; 762 } 763 764 765 #ifdef MAC68K_DEBUG 766 static int 767 peek_packet(uint8_t* buf) 768 { 769 struct ether_header *eh; 770 uint16_t type; 771 int len; 772 773 eh = (struct ether_header*)buf; 774 type = _2btol((uint8_t*)&(eh->ether_type)); 775 776 len = sizeof(struct ether_header); 777 778 if (type <= ETHERMTU) { 779 /* for 802.3 */ 780 len += type; 781 } else{ 782 /* for Ethernet II (DIX) */ 783 switch (type) { 784 case ETHERTYPE_ARP: 785 len += 28; 786 break; 787 case ETHERTYPE_IP: 788 len += _2btol(buf + sizeof(struct ether_header) + 2); 789 break; 790 default: 791 len = 0; 792 goto l_end; 793 break; 794 } 795 } 796 if (len < DSE_MINSIZE) { 797 len = DSE_MINSIZE; 798 } 799 len += ETHER_CRC_LEN; 800 801 l_end:; 802 return len; 803 } 804 #endif 805 806 807 /* 808 * Pass packets to higher levels. 809 */ 810 static int 811 dse_read(struct dse_softc *sc, uint8_t *data, int datalen) 812 { 813 struct mbuf *m; 814 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 815 int len; 816 int n; 817 #ifdef MAC68K_DEBUG 818 int peek_flag = 1; 819 #endif 820 821 mutex_enter(&sc->sc_iflock); 822 n = 0; 823 while (datalen >= DSE_HEADER_RX) { 824 /* 825 * fetch bytes of stream. 826 * here length = (ether frame length) + (FCS's 4 bytes) 827 */ 828 /* fetch frame length */ 829 len = _2btol(data); 830 831 /* skip header part */ 832 data += DSE_HEADER_RX; 833 datalen -= DSE_HEADER_RX; 834 835 #if 0 /* 03/10/2001 only for debug */ 836 { 837 printf("DATALEN %d len %d\n", datalen, len); 838 int j; 839 printf("\ndump[%d]: ",n); 840 for ( j = 0 ; j < datalen ; j++ ) { 841 printf("%02X ",data[j-DSE_HEADER_RX]); 842 } 843 } 844 #endif 845 #ifdef MAC68K_DEBUG 846 if (peek_flag) { 847 peek_flag = 0; 848 len = peek_packet(data); 849 } 850 #endif 851 if (len == 0) 852 break; 853 854 #ifdef DSE_DEBUG 855 aprint_error_dev(sc->sc_dev, "dse_read: datalen = %d, packetlen" 856 " = %d, proto = 0x%04x\n", datalen, len, 857 ntohs(((struct ether_header *)data)->ether_type)); 858 #endif 859 if ((len < (DSE_MINSIZE + ETHER_CRC_LEN)) || 860 (MAX_BYTES_RX < len)) { 861 #ifdef DSE_DEBUG 862 aprint_error_dev(sc->sc_dev, "invalid packet size " 863 "%d; dropping\n", len); 864 #endif 865 if_statinc(ifp, if_ierrors); 866 break; 867 } 868 869 /* Don't need crc. Must keep ether header for BPF */ 870 m = dse_get(sc, data, len - ETHER_CRC_LEN); 871 if (m == NULL) { 872 #ifdef DSE_DEBUG 873 if (sc->sc_debug) 874 aprint_error_dev(sc->sc_dev, "dse_read: " 875 "dse_get returned null\n"); 876 #endif 877 if_statinc(ifp, if_ierrors); 878 goto next_packet; 879 } 880 if_statinc(ifp, if_ipackets); 881 882 /* 883 * Check if there's a BPF listener on this interface. 884 * If so, hand off the raw packet to BPF. 885 */ 886 if (ifp->if_bpf) 887 bpf_mtap(ifp, m, BPF_D_OUT); 888 889 /* Pass the packet up. */ 890 if_percpuq_enqueue(sc->sc_ipq, m); 891 892 next_packet: 893 data += len; 894 datalen -= len; 895 n++; 896 } 897 mutex_exit(&sc->sc_iflock); 898 899 return n; 900 } 901 902 903 static void 904 dsewatchdog(struct ifnet *ifp) 905 { 906 struct dse_softc *sc = ifp->if_softc; 907 908 log(LOG_ERR, "%s: device timeout\n", device_xname(sc->sc_dev)); 909 if_statinc(ifp, if_oerrors); 910 911 dse_reset(sc); 912 } 913 914 915 static int 916 dse_reset(struct dse_softc *sc) 917 { 918 int error; 919 #if 0 920 /* Maybe we don't *really* want to reset the entire bus 921 * because the ctron isn't working. We would like to send a 922 * "BUS DEVICE RESET" message, but don't think the ctron 923 * understands it. 924 */ 925 error = dse_scsipi_cmd(sc->sc_periph, 0, 0, 0, 0, DSE_RETRIES, 2000, 926 NULL, XS_CTL_RESET); 927 #endif 928 error = dse_init(sc); 929 return error; 930 } 931 932 933 static int 934 dse_init_adaptor(struct dse_softc *sc) 935 { 936 scsi_dayna_ether_generic cmd_vend1; 937 u_char tmpbuf[sizeof(cmd_vend1)]; 938 int error; 939 940 #if 0 /* 07/21/2001 for test */ 941 /* Maybe we don't *really* want to reset the entire bus 942 * because the ctron isn't working. We would like to send a 943 * "BUS DEVICE RESET" message, but don't think the ctron 944 * understands it. 945 */ 946 error = dse_scsipi_cmd(sc->sc_periph, 0, 0, 0, 0, DSE_RETRIES, 947 2000, NULL, XS_CTL_RESET); 948 #endif 949 950 cmd_vend1 = sonic_ether_vendor1; 951 952 error = dse_scsipi_cmd(sc->sc_periph, 953 (struct scsipi_generic *)&cmd_vend1, sizeof(cmd_vend1), 954 &(tmpbuf[0]), sizeof(tmpbuf), 955 DSE_RETRIES, DSE_TIMEOUT, NULL, XS_CTL_POLL | XS_CTL_DATA_IN); 956 957 if (error) 958 goto l_end; 959 960 /* wait 500 msec */ 961 kpause("dsesleep", false, hz / 2, NULL); 962 963 l_end: 964 return error; 965 } 966 967 968 static int 969 dse_get_addr(struct dse_softc *sc, uint8_t *myaddr) 970 { 971 scsi_dayna_ether_generic cmd_get_addr; 972 u_char tmpbuf[REQ_LEN_GET_ADDR]; 973 int error; 974 975 memset(&cmd_get_addr, 0, sizeof(cmd_get_addr)); 976 cmd_get_addr.opcode[0] = DAYNA_CMD_GET_ADDR; 977 _lto2b(REQ_LEN_GET_ADDR, cmd_get_addr.length); 978 979 error = dse_scsipi_cmd(sc->sc_periph, 980 (struct scsipi_generic *)&cmd_get_addr, sizeof(cmd_get_addr), 981 tmpbuf, sizeof(tmpbuf), 982 DSE_RETRIES, DSE_TIMEOUT, NULL, XS_CTL_POLL | XS_CTL_DATA_IN); 983 984 if (error == 0) { 985 memcpy(myaddr, &(tmpbuf[0]), ETHER_ADDR_LEN); 986 987 aprint_normal_dev(sc->sc_dev, "ethernet address %s\n", 988 ether_sprintf(myaddr)); 989 } 990 991 return error; 992 } 993 994 995 #if 0 /* 07/16/2000 comment-out */ 996 static int 997 dse_set_mode(struct dse_softc *sc, int len, int mode) 998 999 return 0; 1000 } 1001 #endif 1002 1003 1004 static int 1005 dse_init(struct dse_softc *sc) 1006 { 1007 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1008 int error = 0; 1009 1010 if ((ifp->if_flags & (IFF_RUNNING | IFF_UP)) == IFF_UP) { 1011 ifp->if_flags |= IFF_RUNNING; 1012 mutex_enter(&sc->sc_iflock); 1013 if (!sc->sc_recv_work_pending) { 1014 sc->sc_recv_work_pending = true; 1015 workqueue_enqueue(sc->sc_recv_wq, &sc->sc_recv_work, 1016 NULL); 1017 } 1018 mutex_exit(&sc->sc_iflock); 1019 ifp->if_flags &= ~IFF_OACTIVE; 1020 mutex_enter(&sc->sc_iflock); 1021 if (!sc->sc_send_work_pending) { 1022 sc->sc_send_work_pending = true; 1023 workqueue_enqueue(sc->sc_send_wq, &sc->sc_send_work, 1024 NULL); 1025 } 1026 mutex_exit(&sc->sc_iflock); 1027 } 1028 return error; 1029 } 1030 1031 1032 static uint8_t BROADCAST_ADDR[ETHER_ADDR_LEN] = 1033 { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; 1034 1035 1036 static int 1037 dse_set_multi(struct dse_softc *sc) 1038 { 1039 scsi_dayna_ether_generic cmd_set_multi; 1040 struct ether_multistep step; 1041 struct ether_multi *enm; 1042 u_char *cp, *mybuf; 1043 int error, len; 1044 1045 error = 0; 1046 1047 #ifdef DSE_DEBUG 1048 aprint_error_dev(sc->sc_dev, "dse_set_multi\n"); 1049 #endif 1050 1051 mybuf = malloc(ETHER_ADDR_LEN * DSE_MCAST_MAX, M_DEVBUF, M_NOWAIT); 1052 if (mybuf == NULL) { 1053 error = EIO; 1054 goto l_end; 1055 } 1056 1057 /* 1058 * copy all entries to transfer buffer 1059 */ 1060 cp = mybuf; 1061 len = 0; 1062 ETHER_FIRST_MULTI(step, &(sc->sc_ethercom), enm); 1063 while ((len < (DSE_MCAST_MAX - 1)) && (enm != NULL)) { 1064 /* ### refer low side entry */ 1065 memcpy(cp, enm->enm_addrlo, ETHER_ADDR_LEN); 1066 1067 cp += ETHER_ADDR_LEN; 1068 len++; 1069 ETHER_NEXT_MULTI(step, enm); 1070 } 1071 1072 /* add broadcast address as default */ 1073 memcpy(cp, BROADCAST_ADDR, ETHER_ADDR_LEN); 1074 len++; 1075 1076 len *= ETHER_ADDR_LEN; 1077 1078 memset(&cmd_set_multi, 0, sizeof(cmd_set_multi)); 1079 cmd_set_multi.opcode[0] = DAYNA_CMD_SET_MULTI; 1080 _lto2b(len, cmd_set_multi.length); 1081 1082 error = dse_scsipi_cmd(sc->sc_periph, 1083 (struct scsipi_generic*)&cmd_set_multi, sizeof(cmd_set_multi), 1084 mybuf, len, DSE_RETRIES, DSE_TIMEOUT, NULL, XS_CTL_DATA_OUT); 1085 1086 free(mybuf, M_DEVBUF); 1087 1088 l_end: 1089 return error; 1090 } 1091 1092 1093 static void 1094 dse_stop(struct dse_softc *sc) 1095 { 1096 /* Don't schedule any reads */ 1097 callout_stop(&sc->sc_recv_ch); 1098 1099 /* Wait for the workqueues to finish */ 1100 mutex_enter(&sc->sc_iflock); 1101 workqueue_wait(sc->sc_recv_wq, &sc->sc_recv_work); 1102 workqueue_wait(sc->sc_send_wq, &sc->sc_send_work); 1103 mutex_exit(&sc->sc_iflock); 1104 1105 /* Abort any scsi cmds in progress */ 1106 mutex_enter(chan_mtx(sc->sc_periph->periph_channel)); 1107 scsipi_kill_pending(sc->sc_periph); 1108 mutex_exit(chan_mtx(sc->sc_periph->periph_channel)); 1109 } 1110 1111 1112 /* 1113 * Process an ioctl request. 1114 */ 1115 static int 1116 dse_ioctl(struct ifnet *ifp, u_long cmd, void *data) 1117 { 1118 struct dse_softc *sc; 1119 struct ifaddr *ifa; 1120 struct ifreq *ifr; 1121 struct sockaddr *sa; 1122 int error; 1123 1124 error = 0; 1125 sc = ifp->if_softc; 1126 ifa = (struct ifaddr *)data; 1127 ifr = (struct ifreq *)data; 1128 1129 switch (cmd) { 1130 case SIOCINITIFADDR: 1131 mutex_enter(&sc->sc_iflock); 1132 if ((error = dse_enable(sc)) != 0) 1133 break; 1134 ifp->if_flags |= IFF_UP; 1135 mutex_exit(&sc->sc_iflock); 1136 1137 #if 0 1138 if ((error = dse_set_media(sc, CMEDIA_AUTOSENSE)) != 0) 1139 break; 1140 #endif 1141 1142 switch (ifa->ifa_addr->sa_family) { 1143 #ifdef INET 1144 case AF_INET: 1145 if ((error = dse_init(sc)) != 0) 1146 break; 1147 arp_ifinit(ifp, ifa); 1148 break; 1149 #endif 1150 #ifdef NETATALK 1151 case AF_APPLETALK: 1152 if ((error = dse_init(sc)) != 0) 1153 break; 1154 break; 1155 #endif 1156 default: 1157 error = dse_init(sc); 1158 break; 1159 } 1160 break; 1161 1162 1163 case SIOCSIFADDR: 1164 mutex_enter(&sc->sc_iflock); 1165 error = dse_enable(sc); 1166 mutex_exit(&sc->sc_iflock); 1167 if (error != 0) 1168 break; 1169 ifp->if_flags |= IFF_UP; 1170 1171 switch (ifa->ifa_addr->sa_family) { 1172 #ifdef INET 1173 case AF_INET: 1174 if ((error = dse_init(sc)) != 0) 1175 break; 1176 arp_ifinit(ifp, ifa); 1177 break; 1178 #endif 1179 #ifdef NETATALK 1180 case AF_APPLETALK: 1181 if ((error = dse_init(sc)) != 0) 1182 break; 1183 break; 1184 #endif 1185 default: 1186 error = dse_init(sc); 1187 break; 1188 } 1189 break; 1190 1191 case SIOCSIFFLAGS: 1192 if ((error = ifioctl_common(ifp, cmd, data)) != 0) 1193 break; 1194 /* XXX re-use ether_ioctl() */ 1195 switch (ifp->if_flags & (IFF_UP | IFF_RUNNING)) { 1196 case IFF_RUNNING: 1197 /* 1198 * If interface is marked down and it is running, then 1199 * stop it. 1200 */ 1201 dse_stop(sc); 1202 mutex_enter(&sc->sc_iflock); 1203 ifp->if_flags &= ~IFF_RUNNING; 1204 dse_disable(sc); 1205 mutex_exit(&sc->sc_iflock); 1206 break; 1207 case IFF_UP: 1208 /* 1209 * If interface is marked up and it is stopped, then 1210 * start it. 1211 */ 1212 mutex_enter(&sc->sc_iflock); 1213 error = dse_enable(sc); 1214 mutex_exit(&sc->sc_iflock); 1215 if (error) 1216 break; 1217 error = dse_init(sc); 1218 break; 1219 default: 1220 /* 1221 * Reset the interface to pick up changes in any other 1222 * flags that affect hardware registers. 1223 */ 1224 mutex_enter(&sc->sc_iflock); 1225 if (sc->sc_enabled) 1226 error = dse_init(sc); 1227 mutex_exit(&sc->sc_iflock); 1228 break; 1229 } 1230 #ifdef DSE_DEBUG 1231 if (ifp->if_flags & IFF_DEBUG) 1232 sc->sc_debug = 1; 1233 else 1234 sc->sc_debug = 0; 1235 #endif 1236 break; 1237 1238 case SIOCADDMULTI: 1239 if (sc->sc_enabled == 0) { 1240 error = EIO; 1241 break; 1242 } 1243 mutex_enter(&sc->sc_iflock); 1244 sa = sockaddr_dup(ifreq_getaddr(cmd, ifr), M_WAITOK); 1245 mutex_exit(&sc->sc_iflock); 1246 if (ether_addmulti(sa, &sc->sc_ethercom) == ENETRESET) { 1247 error = dse_set_multi(sc); 1248 #ifdef DSE_DEBUG 1249 aprint_error_dev(sc->sc_dev, "add multi: %s\n", 1250 ether_sprintf(ifr->ifr_addr.sa_data)); 1251 #endif 1252 } else 1253 error = 0; 1254 1255 mutex_enter(&sc->sc_iflock); 1256 sockaddr_free(sa); 1257 mutex_exit(&sc->sc_iflock); 1258 1259 break; 1260 1261 case SIOCDELMULTI: 1262 if (sc->sc_enabled == 0) { 1263 error = EIO; 1264 break; 1265 } 1266 mutex_enter(&sc->sc_iflock); 1267 sa = sockaddr_dup(ifreq_getaddr(cmd, ifr), M_WAITOK); 1268 mutex_exit(&sc->sc_iflock); 1269 if (ether_delmulti(sa, &sc->sc_ethercom) == ENETRESET) { 1270 error = dse_set_multi(sc); 1271 #ifdef DSE_DEBUG 1272 aprint_error_dev(sc->sc_dev, "delete multi: %s\n", 1273 ether_sprintf(ifr->ifr_addr.sa_data)); 1274 #endif 1275 } else 1276 error = 0; 1277 1278 mutex_enter(&sc->sc_iflock); 1279 sockaddr_free(sa); 1280 mutex_exit(&sc->sc_iflock); 1281 1282 break; 1283 1284 default: 1285 error = ether_ioctl(ifp, cmd, data); 1286 break; 1287 } 1288 1289 1290 return error; 1291 } 1292 1293 1294 /* 1295 * Enable the network interface. 1296 */ 1297 int 1298 dse_enable(struct dse_softc *sc) 1299 { 1300 struct scsipi_periph *periph = sc->sc_periph; 1301 struct scsipi_adapter *adapt = periph->periph_channel->chan_adapter; 1302 int error = 0; 1303 1304 if (sc->sc_enabled == 0) { 1305 if ((error = scsipi_adapter_addref(adapt)) == 0) 1306 sc->sc_enabled = 1; 1307 else 1308 aprint_error_dev(sc->sc_dev, "device enable failed\n"); 1309 } 1310 1311 return error; 1312 } 1313 1314 1315 /* 1316 * Disable the network interface. 1317 */ 1318 void 1319 dse_disable(struct dse_softc *sc) 1320 { 1321 struct scsipi_periph *periph = sc->sc_periph; 1322 struct scsipi_adapter *adapt = periph->periph_channel->chan_adapter; 1323 if (sc->sc_enabled != 0) { 1324 scsipi_adapter_delref(adapt); 1325 sc->sc_enabled = 0; 1326 } 1327 } 1328 1329 1330 #define DSEUNIT(z) (minor(z)) 1331 1332 /* 1333 * open the device. 1334 */ 1335 int 1336 dseopen(dev_t dev, int flag, int fmt, struct lwp *l) 1337 { 1338 int unit, error; 1339 struct dse_softc *sc; 1340 struct scsipi_periph *periph; 1341 struct scsipi_adapter *adapt; 1342 1343 unit = DSEUNIT(dev); 1344 sc = device_lookup_private(&dse_cd, unit); 1345 if (sc == NULL) 1346 return ENXIO; 1347 1348 periph = sc->sc_periph; 1349 adapt = periph->periph_channel->chan_adapter; 1350 1351 if ((error = scsipi_adapter_addref(adapt)) != 0) 1352 return error; 1353 1354 SC_DEBUG(periph, SCSIPI_DB1, 1355 ("scopen: dev=0x%"PRIx64" (unit %d (of %d))\n", dev, unit, 1356 dse_cd.cd_ndevs)); 1357 1358 periph->periph_flags |= PERIPH_OPEN; 1359 1360 SC_DEBUG(periph, SCSIPI_DB3, ("open complete\n")); 1361 1362 return 0; 1363 } 1364 1365 1366 /* 1367 * close the device.. only called if we are the LAST 1368 * occurrence of an open device 1369 */ 1370 int 1371 dseclose(dev_t dev, int flag, int fmt, struct lwp *l) 1372 { 1373 struct dse_softc *sc = device_lookup_private(&dse_cd, DSEUNIT(dev)); 1374 struct scsipi_periph *periph = sc->sc_periph; 1375 struct scsipi_adapter *adapt = periph->periph_channel->chan_adapter; 1376 1377 SC_DEBUG(sc->sc_periph, SCSIPI_DB1, ("closing\n")); 1378 1379 scsipi_wait_drain(periph); 1380 1381 scsipi_adapter_delref(adapt); 1382 periph->periph_flags &= ~PERIPH_OPEN; 1383 1384 return 0; 1385 } 1386 1387 1388 /* 1389 * Perform special action on behalf of the user 1390 * Only does generic scsi ioctls. 1391 */ 1392 int 1393 dseioctl(dev_t dev, u_long cmd, void *addr, int flag, struct lwp *l) 1394 { 1395 struct dse_softc *sc = device_lookup_private(&dse_cd, DSEUNIT(dev)); 1396 1397 return (scsipi_do_ioctl(sc->sc_periph, dev, cmd, addr, flag, l)); 1398 } 1399 1400
Indexes created Sat Sep 27 22:09:54 GMT 2025