Home | History | Annotate | Line # | Download | only in gumstix
      1 /*	$NetBSD: gxio.c,v 1.29 2022/10/29 13:10:25 jmcneill Exp $ */
      2 /*
      3  * Copyright (C) 2005, 2006, 2007 WIDE Project and SOUM Corporation.
      4  * All rights reserved.
      5  *
      6  * Written by Takashi Kiyohara and Susumu Miki for WIDE Project and SOUM
      7  * Corporation.
      8  *
      9  * Redistribution and use in source and binary forms, with or without
     10  * modification, are permitted provided that the following conditions
     11  * are met:
     12  * 1. Redistributions of source code must retain the above copyright
     13  *    notice, this list of conditions and the following disclaimer.
     14  * 2. Redistributions in binary form must reproduce the above copyright
     15  *    notice, this list of conditions and the following disclaimer in the
     16  *    documentation and/or other materials provided with the distribution.
     17  * 3. Neither the name of the project nor the name of SOUM Corporation
     18  *    may be used to endorse or promote products derived from this software
     19  *    without specific prior written permission.
     20  *
     21  * THIS SOFTWARE IS PROVIDED BY THE PROJECT and SOUM CORPORATION ``AS IS''
     22  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     23  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     24  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT AND SOUM CORPORATION
     25  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     26  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     27  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     28  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     29  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     30  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     31  * POSSIBILITY OF SUCH DAMAGE.
     32  */
     33 #include <sys/cdefs.h>
     34 __KERNEL_RCSID(0, "$NetBSD: gxio.c,v 1.29 2022/10/29 13:10:25 jmcneill Exp $");
     35 
     36 #include "opt_cputypes.h"
     37 #include "opt_gumstix.h"
     38 #include "opt_gxio.h"
     39 
     40 #include <sys/param.h>
     41 #include <sys/device.h>
     42 #include <sys/errno.h>
     43 #include <sys/kernel.h>
     44 
     45 #include <sys/systm.h>
     46 
     47 #include <machine/bootconfig.h>
     48 
     49 #if defined(CPU_XSCALE)
     50 #include <arm/xscale/pxa2x0cpu.h>
     51 #endif
     52 #include <arm/xscale/pxa2x0reg.h>
     53 #include <arm/xscale/pxa2x0var.h>
     54 #include <arm/xscale/pxa2x0_gpio.h>
     55 #include <evbarm/gumstix/gumstixreg.h>
     56 #include <evbarm/gumstix/gumstixvar.h>
     57 
     58 #include "ioconf.h"
     59 #include "locators.h"
     60 
     61 
     62 struct gxioconf {
     63 	const char *name;
     64 	void (*config)(void);
     65 };
     66 
     67 #if defined(GUMSTIX)
     68 static int gxiomatch(device_t, cfdata_t, void *);
     69 static void gxioattach(device_t, device_t, void *);
     70 static int gxiosearch(device_t, cfdata_t, const int *, void *);
     71 static int gxioprint(void *, const char *);
     72 
     73 CFATTACH_DECL_NEW(gxio, sizeof(struct gxio_softc),
     74     gxiomatch, gxioattach, NULL, NULL);
     75 #endif
     76 
     77 void gxio_config(void);
     78 void gxio_config_expansion(const char *);
     79 #if defined(GUMSTIX)
     80 static void basix_config(void);
     81 static void cfstix_config(void);
     82 static void etherstix_config(void);
     83 static void netcf_config(void);
     84 static void netcf_vx_config(void);
     85 static void netduommc_config(void);
     86 static void netduo_config(void);
     87 static void netmicrosd_config(void);
     88 static void netwifimicrosd_config(void);
     89 static void netmmc_config(void);
     90 static void wifistix_config(void);
     91 static void wifistix_cf_config(void);
     92 #endif
     93 
     94 #if defined(CPU_XSCALE_PXA250)
     95 
     96 static struct pxa2x0_gpioconf pxa255dep_gpioconf[] = {
     97 	/* Bluetooth module configuration */
     98 	{  7, GPIO_OUT | GPIO_SET },	/* power on */
     99 	{ 12, GPIO_ALT_FN_1_OUT },	/* 32kHz out. required by SingleStone */
    100 
    101 	/* AC97 configuration */
    102 	{ 29, GPIO_ALT_FN_1_IN },	/* SDATA_IN0 */
    103 
    104 	/* FFUART configuration */
    105 	{ 35, GPIO_ALT_FN_1_IN },	/* CTS */
    106 	{ 41, GPIO_ALT_FN_2_OUT },	/* RTS */
    107 
    108 #ifndef GXIO_BLUETOOTH_ON_HWUART
    109 	/* BTUART configuration */
    110 	{ 44, GPIO_ALT_FN_1_IN },	/* BTCTS */
    111 	{ 45, GPIO_ALT_FN_2_OUT },	/* BTRTS */
    112 #else
    113 	/* HWUART configuration */
    114 	{ 42, GPIO_ALT_FN_3_IN },	/* HWRXD */
    115 	{ 43, GPIO_ALT_FN_3_OUT },	/* HWTXD */
    116 	{ 44, GPIO_ALT_FN_3_IN },	/* HWCTS */
    117 	{ 45, GPIO_ALT_FN_3_OUT },	/* HWRTS */
    118 #endif
    119 
    120 #ifndef GXIO_BLUETOOTH_ON_HWUART
    121 	/* HWUART configuration */
    122 	{ 48, GPIO_ALT_FN_1_OUT },	/* HWTXD */
    123 	{ 49, GPIO_ALT_FN_1_IN },	/* HWRXD */
    124 	{ 50, GPIO_ALT_FN_1_IN },	/* HWCTS */
    125 	{ 51, GPIO_ALT_FN_1_OUT },	/* HWRTS */
    126 #endif
    127 
    128 	{ -1 }
    129 };
    130 #endif
    131 #if defined(CPU_XSCALE_PXA270)
    132 static struct pxa2x0_gpioconf verdexdep_gpioconf[] = {
    133 	/* Bluetooth module configuration */
    134 	{   9, GPIO_ALT_FN_3_OUT },	/* CHOUT<0> */
    135 	{  12, GPIO_OUT | GPIO_SET },
    136 
    137 	/* LCD configuration */
    138 	{  17, GPIO_IN },		/* backlight on */
    139 
    140 	/* FFUART configuration */
    141 	{  34, GPIO_ALT_FN_1_IN },	/* FFRXD */
    142 	{  39, GPIO_ALT_FN_2_OUT },	/* FFTXD */
    143 
    144 	/* BTUART configuration */
    145 	{  42, GPIO_ALT_FN_1_IN },	/* BTRXD */
    146 	{  43, GPIO_ALT_FN_2_OUT },	/* BTTXD */
    147 	{  44, GPIO_ALT_FN_1_IN },	/* BTCTS */
    148 	{  45, GPIO_ALT_FN_2_OUT },	/* BTRTS */
    149 
    150 	/* AC97 configuration */
    151 	{  29, GPIO_ALT_FN_1_IN },	/* SDATA_IN0 */
    152 
    153 	{ -1 }
    154 };
    155 #endif
    156 
    157 static const struct gxioconf gxioconflist[] = {
    158 #if defined(GUMSTIX)
    159 	{ "basix",		basix_config },
    160 	{ "cfstix",		cfstix_config },
    161 	{ "etherstix",		etherstix_config },
    162 	{ "netcf",		netcf_config },
    163 	{ "netcf-vx",		netcf_vx_config },
    164 	{ "netduo-mmc",		netduommc_config },
    165 	{ "netduo",		netduo_config },
    166 	{ "netmicrosd",		netmicrosd_config },
    167 	{ "netmicrosd-vx",	netmicrosd_config },
    168 	{ "netwifimicrosd",	netwifimicrosd_config },
    169 	{ "netmmc",		netmmc_config },
    170 	{ "netpro-vx",		netwifimicrosd_config },
    171 	{ "wifistix-cf",	wifistix_cf_config },
    172 	{ "wifistix",		wifistix_config },
    173 #endif
    174 	{ NULL }
    175 };
    176 
    177 int gxpcic_gpio_reset;
    178 struct gxpcic_slot_irqs gxpcic_slot_irqs[2] = { { 0, -1, -1 }, { 0, -1, -1 } };
    179 
    180 
    181 #if defined(GUMSTIX)
    182 /* ARGSUSED */
    183 static int
    184 gxiomatch(device_t parent, cfdata_t match, void *aux)
    185 {
    186 
    187 	struct pxaip_attach_args *pxa = aux;
    188 	bus_space_tag_t iot = &pxa2x0_bs_tag;
    189 	bus_space_handle_t ioh;
    190 
    191 	if (strcmp(pxa->pxa_name, match->cf_name) != 0 ||
    192 	    pxa->pxa_addr != PXAIPCF_ADDR_DEFAULT)
    193 		 return 0;
    194 
    195 	if (bus_space_map(iot,
    196 	    PXA2X0_MEMCTL_BASE, PXA2X0_MEMCTL_SIZE, 0, &ioh))
    197 		return 0;
    198 	bus_space_unmap(iot, ioh, PXA2X0_MEMCTL_SIZE);
    199 
    200 	/* nothing */
    201 	return 1;
    202 }
    203 
    204 /* ARGSUSED */
    205 static void
    206 gxioattach(device_t parent, device_t self, void *aux)
    207 {
    208 	struct gxio_softc *sc = device_private(self);
    209 
    210 	aprint_normal("\n");
    211 	aprint_naive("\n");
    212 
    213 	sc->sc_dev = self;
    214 	sc->sc_iot = &pxa2x0_bs_tag;
    215 
    216 	if (bus_space_map(sc->sc_iot,
    217 	    PXA2X0_MEMCTL_BASE, PXA2X0_MEMCTL_SIZE, 0, &sc->sc_ioh))
    218 		return;
    219 
    220 	/*
    221 	 *  Attach each gumstix(busheader)/overo expansion board devices.
    222 	 */
    223 	config_search(self, NULL,
    224 	    CFARGS(.search = gxiosearch));
    225 }
    226 
    227 /* ARGSUSED */
    228 static int
    229 gxiosearch(device_t parent, cfdata_t cf, const int *ldesc, void *aux)
    230 {
    231 	struct gxio_softc *sc = device_private(parent);
    232 	struct gxio_attach_args gxa;
    233 
    234 	gxa.gxa_sc = sc;
    235 	gxa.gxa_iot = sc->sc_iot;
    236 	gxa.gxa_addr = cf->cf_loc[GXIOCF_ADDR];
    237 	gxa.gxa_gpirq = cf->cf_loc[GXIOCF_GPIRQ];
    238 
    239 	if (config_probe(parent, cf, &gxa))
    240 		config_attach(parent, cf, &gxa, gxioprint, CFARGS_NONE);
    241 
    242 	return 0;
    243 }
    244 
    245 /* ARGSUSED */
    246 static int
    247 gxioprint(void *aux, const char *name)
    248 {
    249 	struct gxio_attach_args *gxa = (struct gxio_attach_args *)aux;
    250 
    251 	if (gxa->gxa_addr != GXIOCF_ADDR_DEFAULT)
    252 		printf(" addr 0x%lx", gxa->gxa_addr);
    253 	if (gxa->gxa_gpirq > 0)
    254 		printf(" gpirq %d", gxa->gxa_gpirq);
    255 	return UNCONF;
    256 }
    257 #endif
    258 
    259 
    260 #if defined(GUMSTIX)
    261 /*
    262  * configure for GPIO pin and expansion boards.
    263  */
    264 void
    265 gxio_config(void)
    266 {
    267 #if defined(CPU_XSCALE_PXA250)
    268 	struct pxa2x0_gpioconf *gumstix_gpioconf[] = {
    269 		pxa25x_com_ffuart_gpioconf,
    270 		pxa25x_com_stuart_gpioconf,
    271 #ifndef GXIO_BLUETOOTH_ON_HWUART
    272 		pxa25x_com_btuart_gpioconf,
    273 #endif
    274 		pxa25x_com_hwuart_gpioconf,
    275 		pxa25x_i2c_gpioconf,
    276 		pxa25x_pxaacu_gpioconf,
    277 		pxa255dep_gpioconf,
    278 		NULL
    279 	};
    280 #endif
    281 #if defined(CPU_XSCALE_PXA270)
    282 	struct pxa2x0_gpioconf *verdex_gpioconf[] = {
    283 		pxa27x_com_ffuart_gpioconf,
    284 		pxa27x_com_stuart_gpioconf,
    285 		pxa27x_com_btuart_gpioconf,
    286 		pxa27x_i2c_gpioconf,
    287 		pxa27x_pxaacu_gpioconf,
    288 		pxa27x_pxamci_gpioconf,
    289 		pxa27x_ohci_gpioconf,
    290 		verdexdep_gpioconf,
    291 		NULL
    292 	};
    293 #endif
    294 
    295 	/* XXX: turn off for power of bluetooth module */
    296 #if defined(CPU_XSCALE_PXA250)
    297 	pxa2x0_gpio_set_function(7, GPIO_OUT | GPIO_CLR);
    298 #elif defined(CPU_XSCALE_PXA270)
    299 	pxa2x0_gpio_set_function(12, GPIO_OUT | GPIO_CLR);
    300 #endif
    301 	delay(100);
    302 
    303 #if defined(CPU_XSCALE_PXA270) && defined(CPU_XSCALE_PXA250)
    304 	pxa2x0_gpio_config(
    305 	    (CPU_IS_PXA250) ? gumstix_gpioconf : verdex_gpioconf);
    306 #elif defined(CPU_XSCALE_PXA270) || defined(CPU_XSCALE_PXA250)
    307 #if defined(CPU_XSCALE_PXA270)
    308 	pxa2x0_gpio_config(verdex_gpioconf);
    309 #else
    310 	pxa2x0_gpio_config(gumstix_gpioconf);
    311 #endif
    312 #endif
    313 }
    314 #endif
    315 
    316 static int
    317 gxio_find_default_expansion(void)
    318 {
    319 #ifdef GXIO_DEFAULT_EXPANSION
    320 	int i;
    321 
    322 	/* Find out the default expansion */
    323 	for (i = 0; gxioconflist[i].name != NULL; i++)
    324 		if (strncasecmp(gxioconflist[i].name, GXIO_DEFAULT_EXPANSION,
    325 		    strlen(gxioconflist[i].name) + 1) == 0)
    326 			break;
    327 	return gxioconflist[i].name == NULL ? -1 : i;
    328 #else
    329 	return -1;
    330 #endif
    331 }
    332 
    333 void
    334 gxio_config_expansion(const char *expansion)
    335 {
    336 	int i, d;
    337 
    338 	d = gxio_find_default_expansion();
    339 
    340 	/* Print information about expansions */
    341 	printf("supported expansions:\n");
    342 	for (i = 0; gxioconflist[i].name != NULL; i++)
    343 		printf("  %s%s\n", gxioconflist[i].name,
    344 		    i == d ? " (DEFAULT)" : "");
    345 
    346 
    347 	if (expansion == NULL) {
    348 		printf("not specified 'expansion=' in the boot args.\n");
    349 		i = -1;
    350 	} else {
    351 		for (i = 0; gxioconflist[i].name != NULL; i++)
    352 			if (strncasecmp(gxioconflist[i].name, expansion,
    353 			    strlen(gxioconflist[i].name) + 1) == 0)
    354 				break;
    355 		if (gxioconflist[i].name == NULL) {
    356 			printf("unknown expansion specified: %s\n", expansion);
    357 			i = -1;
    358 		}
    359 	}
    360 
    361 	/*
    362 	 * Now proceed to configure the default expansion if one was
    363 	 * specified (and found) or return.
    364 	 */
    365 	const char *toconfigure;
    366 	if (i < 0) {
    367 #ifdef GXIO_DEFAULT_EXPANSION
    368 		if (d == -1) {
    369 			printf("default expansion (%s) not found\n",
    370 			    GXIO_DEFAULT_EXPANSION);
    371 			return;
    372 		}
    373 		expansion = GXIO_DEFAULT_EXPANSION;
    374 		i = d;
    375 		toconfigure = "default";
    376 #else
    377 		return;
    378 #endif
    379 	} else
    380 		toconfigure = "specified";
    381 
    382 	printf("configure %s expansion (%s)\n", toconfigure, expansion);
    383 	gxioconflist[i].config();
    384 }
    385 
    386 
    387 #if defined(GUMSTIX)
    388 
    389 static void
    390 basix_config(void)
    391 {
    392 
    393 	pxa2x0_gpio_set_function(8, GPIO_ALT_FN_1_OUT);		/* MMCCS0 */
    394 	pxa2x0_gpio_set_function(53, GPIO_ALT_FN_1_OUT);	/* MMCCLK */
    395 #if 0
    396 	/* this configuration set by gxmci.c::pxamci_attach() */
    397 	pxa2x0_gpio_set_function(11, GPIO_IN);			/* nSD_DETECT */
    398 	pxa2x0_gpio_set_function(22, GPIO_IN);			/* nSD_WP */
    399 #endif
    400 }
    401 
    402 static void
    403 cfstix_config(void)
    404 {
    405 	u_int gpio, npoe_fn;
    406 #if defined(CPU_XSCALE_PXA270) && defined(CPU_XSCALE_PXA250)
    407 	int bvd = (CPU_IS_PXA250) ? 4 : 111;
    408 #else
    409 #if defined(CPU_XSCALE_PXA270)
    410 	const int bvd = 111;
    411 #else
    412 	const int bvd = 4;
    413 #endif
    414 #endif
    415 
    416 	if (CPU_IS_PXA250) {
    417 		gxpcic_slot_irqs[0].valid = 1;
    418 		gxpcic_slot_irqs[0].cd = 11;
    419 		gxpcic_slot_irqs[0].prdy = 26;
    420 		gxpcic_gpio_reset = 8;
    421 	} else {
    422 		gxpcic_slot_irqs[0].valid = 1;
    423 		gxpcic_slot_irqs[0].cd = 104;
    424 		gxpcic_slot_irqs[0].prdy = 96;
    425 		gxpcic_gpio_reset = 97;
    426 	}
    427 
    428 #if 1
    429 	/* PCD/PRDY set by pxa2x0_pcic.c::pxapcic_attach_common() */
    430 #else
    431 	pxa2x0_gpio_set_function(11, GPIO_IN);		/* PCD1 */
    432 	pxa2x0_gpio_set_function(26, GPIO_IN);		/* PRDY1/~IRQ1 */
    433 #endif
    434 	pxa2x0_gpio_set_function(bvd, GPIO_IN); 	/* BVD1/~STSCHG1 */
    435 
    436 	for (gpio = 48, npoe_fn = 0; gpio <= 53 ; gpio++)
    437 		npoe_fn |= pxa2x0_gpio_get_function(gpio);
    438 	npoe_fn &= GPIO_SET;
    439 
    440 	pxa2x0_gpio_set_function(48, GPIO_ALT_FN_2_OUT | npoe_fn); /* nPOE */
    441 	pxa2x0_gpio_set_function(49, GPIO_ALT_FN_2_OUT);	/* nPWE */
    442 	pxa2x0_gpio_set_function(50, GPIO_ALT_FN_2_OUT);	/* nPIOR */
    443 	pxa2x0_gpio_set_function(51, GPIO_ALT_FN_2_OUT);	/* nPIOW */
    444 	if (CPU_IS_PXA250) {
    445 		pxa2x0_gpio_set_function(52, GPIO_ALT_FN_2_OUT); /* nPCE1 */
    446 		pxa2x0_gpio_set_function(53, GPIO_ALT_FN_2_OUT); /* nPCE2 */
    447 		pxa2x0_gpio_set_function(54, GPIO_ALT_FN_2_OUT); /* pSKTSEL */
    448 	} else {
    449 		pxa2x0_gpio_set_function(102, GPIO_ALT_FN_1_OUT); /* nPCE1 */
    450 		pxa2x0_gpio_set_function(105, GPIO_ALT_FN_1_OUT); /* nPCE2 */
    451 		pxa2x0_gpio_set_function(79, GPIO_ALT_FN_1_OUT);  /* pSKTSEL */
    452 	}
    453 	pxa2x0_gpio_set_function(55, GPIO_ALT_FN_2_OUT);	/* nPREG */
    454 	pxa2x0_gpio_set_function(56, GPIO_ALT_FN_1_IN);		/* nPWAIT */
    455 	pxa2x0_gpio_set_function(57, GPIO_ALT_FN_1_IN);		/* nIOIS16 */
    456 }
    457 
    458 static void
    459 etherstix_config(void)
    460 {
    461 	extern struct cfdata cfdata[];
    462 #if defined(CPU_XSCALE_PXA270) && defined(CPU_XSCALE_PXA250)
    463 	int rst = (CPU_IS_PXA250) ? 80 : 32;
    464 	int irq = (CPU_IS_PXA250) ? 36 : 99;
    465 #else
    466 #if defined(CPU_XSCALE_PXA270)
    467 	const int rst = 32, irq = 99;
    468 #else
    469 	const int rst = 80, irq = 36;
    470 #endif
    471 #endif
    472 	int i;
    473 
    474 	pxa2x0_gpio_set_function(49, GPIO_ALT_FN_2_OUT);	/* nPWE */
    475 	pxa2x0_gpio_set_function(15, GPIO_ALT_FN_2_OUT);	/* nCS 1 */
    476 	pxa2x0_gpio_set_function(rst, GPIO_OUT | GPIO_SET);	/* RESET 1 */
    477 	delay(1);
    478 	pxa2x0_gpio_set_function(rst, GPIO_OUT | GPIO_CLR);
    479 	delay(50000);
    480 
    481 	for (i = 0; cfdata[i].cf_name != NULL; i++)
    482 		if (strcmp(cfdata[i].cf_name, "sm") == 0 &&
    483 		    strcmp(cfdata[i].cf_atname, "sm_gxio") == 0 &&
    484 		    cfdata[i].cf_loc[GXIOCF_ADDR] == 0x04000300 &&
    485 		    cfdata[i].cf_loc[GXIOCF_GPIRQ] == GXIOCF_GPIRQ_DEFAULT)
    486 			cfdata[i].cf_loc[GXIOCF_GPIRQ] = irq;
    487 }
    488 
    489 static void
    490 netcf_config(void)
    491 {
    492 
    493 	etherstix_config();
    494 	cfstix_config();
    495 }
    496 
    497 static void
    498 netcf_vx_config(void)
    499 {
    500 
    501 	/*
    502 	 * XXXX: More power is necessary for NIC and USB???
    503 	 * (no document.  from Linux)
    504 	 */
    505 
    506 	pxa2x0_gpio_set_function(27, GPIO_IN);
    507 	pxa2x0_gpio_set_function(107, GPIO_OUT | GPIO_CLR);
    508 	pxa2x0_gpio_set_function(118, GPIO_ALT_FN_1_IN | GPIO_CLR);
    509 
    510 	etherstix_config();
    511 	cfstix_config();
    512 	if (CPU_IS_PXA270) {
    513 		/* Overwrite */
    514 		gxpcic_slot_irqs[0].cd = 104;
    515 		gxpcic_slot_irqs[0].prdy = 109;
    516 		gxpcic_gpio_reset = 110;
    517 	};
    518 }
    519 
    520 static void
    521 netduommc_config(void)
    522 {
    523 
    524 	netduo_config();
    525 	basix_config();
    526 }
    527 
    528 static void
    529 netduo_config(void)
    530 {
    531 
    532 	etherstix_config();
    533 
    534 	pxa2x0_gpio_set_function(78, GPIO_ALT_FN_2_OUT);	/* nCS 2 */
    535 	pxa2x0_gpio_set_function(52, GPIO_OUT | GPIO_SET);	/* RESET 2 */
    536 	delay(1);
    537 	pxa2x0_gpio_set_function(52, GPIO_OUT | GPIO_CLR);
    538 	delay(50000);
    539 }
    540 
    541 static void
    542 netmicrosd_config(void)
    543 {
    544 
    545 	/* MicroSD(mci) always configure on PXA270 */
    546 
    547 	pxa2x0_gpio_set_function(49, GPIO_ALT_FN_2_OUT);	/* nPWE */
    548 	pxa2x0_gpio_set_function(15, GPIO_ALT_FN_2_OUT);	/* nCS 1 */
    549 	pxa2x0_gpio_set_function(107, GPIO_OUT | GPIO_CLR);	/* RESET 1 */
    550 	delay(hz / 2);
    551 	pxa2x0_gpio_set_function(107, GPIO_OUT | GPIO_SET);
    552 	delay(50000);
    553 }
    554 
    555 static void
    556 netwifimicrosd_config(void)
    557 {
    558 
    559 	netmicrosd_config();
    560 
    561 	cfstix_config();
    562 	/* However use pxamci. */
    563 	pxa2x0_gpio_set_function(111, GPIO_CLR | GPIO_ALT_FN_1_IN);
    564 	/* Power to Marvell 88W8385 */
    565 	pxa2x0_gpio_set_function(80, GPIO_OUT | GPIO_SET);
    566 }
    567 
    568 static void
    569 netmmc_config(void)
    570 {
    571 
    572 	etherstix_config();
    573 	basix_config();
    574 }
    575 
    576 static void
    577 wifistix_config(void)
    578 {
    579 
    580 	cfstix_config();
    581 
    582 	/* Power to Marvell 88W8385 */
    583 	pxa2x0_gpio_set_function(80, GPIO_OUT | GPIO_SET);
    584 }
    585 
    586 static void
    587 wifistix_cf_config(void)
    588 {
    589 
    590 	gxpcic_slot_irqs[1].valid = 1;
    591 	gxpcic_slot_irqs[1].cd = 36;
    592 	gxpcic_slot_irqs[1].prdy = 27;
    593 
    594 #if 1
    595 	/* this configuration set by pxa2x0_pcic.c::pxapcic_attach_common() */
    596 #else
    597 	pxa2x0_gpio_set_function(36, GPIO_IN);		/* PCD2 */
    598 	pxa2x0_gpio_set_function(27, GPIO_IN);		/* PRDY2/~IRQ2 */
    599 #endif
    600 	pxa2x0_gpio_set_function(18, GPIO_IN); 		/* BVD2/~STSCHG2 */
    601 
    602 	cfstix_config();
    603 
    604 	/* Power to Marvell 88W8385 */
    605 	pxa2x0_gpio_set_function(80, GPIO_OUT | GPIO_SET);
    606 }
    607 #endif
    608