1 /* $NetBSD: mly_tables.h,v 1.6 2008/04/28 20:23:55 martin Exp $ */ 2 3 /*- 4 * Copyright (c) 2001 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Andrew Doran, Thor Lancelot Simon, and Eric Haszlakiewicz. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /*- 33 * Copyright (c) 2000 Michael Smith 34 * Copyright (c) 2000 BSDi 35 * All rights reserved. 36 * 37 * Redistribution and use in source and binary forms, with or without 38 * modification, are permitted provided that the following conditions 39 * are met: 40 * 1. Redistributions of source code must retain the above copyright 41 * notice, this list of conditions and the following disclaimer. 42 * 2. Redistributions in binary form must reproduce the above copyright 43 * notice, this list of conditions and the following disclaimer in the 44 * documentation and/or other materials provided with the distribution. 45 * 46 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 47 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 48 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 49 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 50 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 51 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 52 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 53 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 54 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 55 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 56 * SUCH DAMAGE. 57 * 58 * from FreeBSD: mly_tables.h,v 1.2 2001/07/14 00:12:22 msmith Exp 59 */ 60 61 #ifndef _PCI_MLY_TABLES_H_ 62 #define _PCI_MLY_TABLES_H_ 63 64 struct mly_code_lookup { 65 const char *string; 66 u_int code; 67 }; 68 69 static const char *mly_describe_code(const struct mly_code_lookup *, 70 u_int32_t); 71 72 /* 73 * Look up a text description of a numeric code and return a pointer to same. 74 */ 75 static const char * 76 mly_describe_code(const struct mly_code_lookup *table, u_int32_t code) 77 { 78 int i; 79 80 for (i = 0; table[i].string != NULL; i++) 81 if (table[i].code == code) 82 return (table[i].string); 83 84 return (table[i + 1].string); 85 } 86 87 /* 88 * This table is directly derived from the corresponding table in the Linux 89 * driver, and uses a derivative encoding for simplicity's sake. 90 * 91 * The first character of the string determines the format of the message. 92 * 93 * p "physical device <channel>:<target> <text>" (physical device status) 94 * s "physical device <channel>:<target> <text>" (scsi message or error) 95 * " sense key <key> asc <asc> ascq <ascq>" 96 * " info <info> csi <csi>" 97 * l "logical drive <unit>: <text>" (logical device status) 98 * m "logical drive <unit>: <text>" (logical device message) 99 * 100 * Messages which are typically suppressed have the first character 101 * capitalised. These messages will only be printed if bootverbose is set. 102 * 103 * The second character in the string indicates an action to be taken as a 104 * result of the event. 105 * 106 * r rescan the device for possible state change 107 * 108 */ 109 static const struct mly_code_lookup mly_table_event[] = { 110 /* 111 * Physical device events (0x0000 - 0x007f). 112 */ 113 { "pr online", 0x0001 }, 114 { "pr standby", 0x0002 }, 115 { "p automatic rebuild started", 0x0005 }, 116 { "p manual rebuild started", 0x0006 }, 117 { "pr rebuild completed", 0x0007 }, 118 { "pr rebuild cancelled", 0x0008 }, 119 { "pr rebuild failed for unknown reasons", 0x0009 }, 120 { "pr rebuild failed due to new physical device", 0x000a }, 121 { "pr rebuild failed due to logical drive failure", 0x000b }, 122 { "sr offline", 0x000c }, 123 { "pr found", 0x000d }, 124 { "pr gone", 0x000e }, 125 { "p unconfigured", 0x000f }, 126 { "p expand capacity started", 0x0010 }, 127 { "pr expand capacity completed", 0x0011 }, 128 { "pr expand capacity failed", 0x0012 }, 129 { "p parity error", 0x0016 }, 130 { "p soft error", 0x0017 }, 131 { "p miscellaneous error", 0x0018 }, 132 { "p reset", 0x0019 }, 133 { "p active spare found", 0x001a }, 134 { "p warm spare found", 0x001b }, 135 { "s sense data received", 0x001c }, 136 { "p initialization started", 0x001d }, 137 { "pr initialization completed", 0x001e }, 138 { "pr initialization failed", 0x001f }, 139 { "pr initialization cancelled", 0x0020 }, 140 { "P write recovery failed", 0x0021 }, 141 { "p scsi bus reset failed", 0x0022 }, 142 { "p double check condition", 0x0023 }, 143 { "p device cannot be accessed", 0x0024 }, 144 { "p gross error on scsi processor", 0x0025 }, 145 { "p bad tag from device", 0x0026 }, 146 { "p command timeout", 0x0027 }, 147 { "pr system reset", 0x0028 }, 148 { "p busy status or parity error", 0x0029 }, 149 { "pr host set device to failed state", 0x002a }, 150 { "pr selection timeout", 0x002b }, 151 { "p scsi bus phase error", 0x002c }, 152 { "pr device returned unknown status", 0x002d }, 153 { "pr device not ready", 0x002e }, 154 { "p device not found at startup", 0x002f }, 155 { "p COD write operation failed", 0x0030 }, 156 { "p BDT write operation failed", 0x0031 }, 157 { "p missing at startup", 0x0039 }, 158 { "p start rebuild failed (physical drive too small)", 0x003a }, 159 160 /* 161 * Logical device events (0x0080 - 0x00ff). 162 */ 163 { "m consistency check started", 0x0080 }, 164 { "mr consistency check completed", 0x0081 }, 165 { "mr consistency check cancelled", 0x0082 }, 166 { "mr consistency check completed with errors", 0x0083 }, 167 { "mr consistency check failed (logical drive failure)",0x0084 }, 168 { "mr consistency check failed (physical device failure)",0x0085 }, 169 { "lr offline", 0x0086 }, 170 { "lr critical", 0x0087 }, 171 { "lr online", 0x0088 }, 172 { "m automatic rebuild started", 0x0089 }, 173 { "m manual rebuild started", 0x008a }, 174 { "mr rebuild completed", 0x008b }, 175 { "mr rebuild cancelled", 0x008c }, 176 { "mr rebuild failed for unknown reasons", 0x008d }, 177 { "mr rebuild failed due to new physical device", 0x008e }, 178 { "mr rebuild failed due to logical drive failure", 0x008f }, 179 { "l initialization started", 0x0090 }, 180 { "lr initialization completed", 0x0091 }, 181 { "lr initialization cancelled", 0x0092 }, 182 { "lr initialization failed", 0x0093 }, 183 { "lr found", 0x0094 }, 184 { "lr gone", 0x0095 }, 185 { "l expand capacity started", 0x0096 }, 186 { "lr expand capacity completed", 0x0097 }, 187 { "lr expand capacity failed", 0x0098 }, 188 { "l bad block found", 0x0099 }, 189 { "lr size changed", 0x009a }, 190 { "lr type changed", 0x009b }, 191 { "l bad data block found", 0x009c }, 192 { "l read of data block in bdt", 0x009e }, 193 { "l write back data for disk block lost", 0x009f }, 194 195 /* 196 * Enclosure management events (0x0100 - 0x017f). 197 */ 198 { "e enclosure %d fan %d failed", 0x0140 }, 199 { "e enclosure %d fan %d ok", 0x0141 }, 200 { "e enclosure %d fan %d not present", 0x0142 }, 201 { "e enclosure %d power supply %d failed", 0x0143 }, 202 { "e enclosure %d power supply %d ok", 0x0144 }, 203 { "e enclosure %d power supply %d not present", 0x0145 }, 204 { "e enclosure %d temperature sensor %d failed", 0x0146 }, 205 { "e enclosure %d temperature sensor %d critical", 0x0147 }, 206 { "e enclosure %d temperature sensor %d ok", 0x0148 }, 207 { "e enclosure %d temperature sensor %d not present", 0x0149 }, 208 { "e enclosure %d unit %d access critical", 0x014a }, 209 { "e enclosure %d unit %d access ok", 0x014b }, 210 { "e enclosure %d unit %d access offline", 0x014c }, 211 212 /* 213 * Controller events (0x0180 - 0x01ff). 214 */ 215 { "c cache write back error", 0x0181 }, 216 { "c battery backup unit found", 0x0188 }, 217 { "c battery backup unit charge level low", 0x0189 }, 218 { "c battery backup unit charge level ok", 0x018a }, 219 { "c installation aborted", 0x0193 }, 220 { "c mirror race recovery in progress", 0x0195 }, 221 { "c mirror race on critical drive", 0x0196 }, 222 { "c memory soft ecc error", 0x019e }, 223 { "c memory hard ecc error", 0x019f }, 224 { "c battery backup unit failed", 0x01a2 }, 225 226 { NULL, 0 }, 227 { "? unknown event code", 0 } 228 }; 229 230 /* 231 * Values here must be 16 characters or less, as they are packed into 232 * the 'product' field in the SCSI inquiry data. 233 */ 234 static const struct mly_code_lookup mly_table_device_state[] = { 235 { "OFLN", MLY_DEVICE_STATE_OFFLINE }, 236 { "UNCF", MLY_DEVICE_STATE_UNCONFIGURED }, 237 { "ONLN", MLY_DEVICE_STATE_ONLINE }, 238 { "CRIT", MLY_DEVICE_STATE_CRITICAL }, 239 { "NORD", MLY_DEVICE_STATE_WRITEONLY }, 240 { "STBY", MLY_DEVICE_STATE_STANDBY }, 241 { "MISS", MLY_DEVICE_STATE_MISSING }, 242 { NULL, 0 }, 243 { "????", 0 } 244 }; 245 246 /* 247 * Values here must be 8 characters or less, as they are packed into the 248 * 'vendor' field in the SCSI inquiry data. 249 */ 250 static const struct mly_code_lookup mly_table_device_type[] = { 251 { "RAID 0", MLY_DEVICE_TYPE_RAID0 }, 252 { "RAID 1", MLY_DEVICE_TYPE_RAID1 }, 253 { "RAID 3", MLY_DEVICE_TYPE_RAID3 }, 254 { "RAID 5", MLY_DEVICE_TYPE_RAID5 }, 255 { "RAID 6", MLY_DEVICE_TYPE_RAID6 }, 256 { "RAID 7", MLY_DEVICE_TYPE_RAID7 }, 257 { "SPAN", MLY_DEVICE_TYPE_NEWSPAN }, 258 { "RAID 3", MLY_DEVICE_TYPE_RAID3F }, 259 { "RAID 3", MLY_DEVICE_TYPE_RAID3L }, 260 { "SPAN", MLY_DEVICE_TYPE_SPAN }, 261 { "RAID 5", MLY_DEVICE_TYPE_RAID5L }, 262 { "RAID E", MLY_DEVICE_TYPE_RAIDE }, 263 { "PHYSICAL", MLY_DEVICE_TYPE_PHYSICAL }, 264 { NULL, 0 }, 265 { "UNKNOWN", 0 } 266 }; 267 268 #ifdef notused 269 static struct mly_code_lookup mly_table_bustype[] = { 270 { "SCSI", 0x00 }, 271 { "FC-AL", 0x01 }, 272 { "PCI", 0x03 }, 273 { NULL, 0 }, 274 { "unknown bus", 0} 275 }; 276 277 static const struct mly_code_lookup mly_table_controllertype[] = { 278 #if 0 /* not supported by this driver */ 279 { "DAC960E", 0x01 }, /* EISA */ 280 { "DAC960M", 0x08 }, /* MCA */ 281 { "DAC960PD", 0x10 }, /* PCI Dual */ 282 { "DAC960PL", 0x11 }, /* PCU low-cost */ 283 { "DAC960PDU", 0x12 }, /* PD Ultra */ 284 { "DAC960PE", 0x13 }, /* Peregrine low-cost */ 285 { "DAC960PG", 0x14 }, /* Peregrine high-performance */ 286 { "DAC960PJ", 0x15 }, /* Road Runner */ 287 { "DAC960PTL0", 0x16 }, /* Jaguar */ 288 { "DAC960PR", 0x17 }, /* Road Runner (again?) */ 289 { "DAC960PRL", 0x18 }, /* Tomcat */ 290 { "DAC960PT", 0x19 }, /* Road Runner (yet again?) */ 291 { "DAC1164P", 0x1a }, /* Little Apple */ 292 { "DAC960PTL1", 0x1b }, /* Jaguar+ */ 293 #endif 294 { "EXR2000P", 0x1c }, /* Big Apple */ 295 { "EXR3000P", 0x1d }, /* Fibre Apple */ 296 { "AcceleRAID 352", 0x1e }, /* Leopard */ 297 { "AcceleRAID 170", 0x1f }, /* Lynx */ 298 { "AcceleRAID 160", 0x20 }, /* Bobcat */ 299 { NULL, 0 }, 300 { "unknown adapter", 0 } 301 }; 302 303 static const struct mly_code_lookup mly_table_oemname[] = { 304 { "Mylex", MLY_OEM_MYLEX }, 305 { "IBM", MLY_OEM_IBM }, 306 { "Hewlett-Packard", MLY_OEM_HP }, 307 { "DEC/Compaq", MLY_OEM_DEC }, 308 { "Siemens", MLY_OEM_SIEMENS }, 309 { "Intel", MLY_OEM_INTEL }, 310 { NULL, 0 }, 311 { "unknown OEM", 0 } 312 }; 313 314 static const struct mly_code_lookup mly_table_memorytype[] = { 315 { "DRAM", 0x01 }, 316 { "EDRAM", 0x02 }, 317 { "EDO RAM", 0x03 }, 318 { "SDRAM", 0x04 }, 319 { NULL, 0 }, 320 { "unknown memory", 0 } 321 }; 322 323 static const struct mly_code_lookup mly_table_cputype[] = { 324 { "i960CA", 0x01 }, 325 { "i960RD", 0x02 }, 326 { "i960RN", 0x03 }, 327 { "i960RP", 0x04 }, 328 { "NorthBay(?)", 0x05 }, 329 { "StrongArm", 0x06 }, 330 { "i960RM", 0x07 }, 331 { NULL, 0 }, 332 { "unknown CPU", 0 } 333 }; 334 335 static const struct mly_code_lookup mly_table_stripe_size[] = { 336 { "NONE", MLY_STRIPE_ZERO }, 337 { "512B", MLY_STRIPE_512b }, 338 { "1k", MLY_STRIPE_1k }, 339 { "2k", MLY_STRIPE_2k }, 340 { "4k", MLY_STRIPE_4k }, 341 { "8k", MLY_STRIPE_8k }, 342 { "16k", MLY_STRIPE_16k }, 343 { "32k", MLY_STRIPE_32k }, 344 { "64k", MLY_STRIPE_64k }, 345 { "128k", MLY_STRIPE_128k }, 346 { "256k", MLY_STRIPE_256k }, 347 { "512k", MLY_STRIPE_512k }, 348 { "1M", MLY_STRIPE_1m }, 349 { NULL, 0 }, 350 { "unknown", 0 } 351 }; 352 353 static const struct mly_code_lookup mly_table_cacheline_size[] = { 354 { "NONE", MLY_CACHELINE_ZERO }, 355 { "512B", MLY_CACHELINE_512b }, 356 { "1k", MLY_CACHELINE_1k }, 357 { "2k", MLY_CACHELINE_2k }, 358 { "4k", MLY_CACHELINE_4k }, 359 { "8k", MLY_CACHELINE_8k }, 360 { "16k", MLY_CACHELINE_16k }, 361 { "32k", MLY_CACHELINE_32k }, 362 { "64k", MLY_CACHELINE_64k }, 363 { NULL, 0 }, 364 { "unknown", 0 } 365 }; 366 #endif /* notused */ 367 368 #endif /* !defined _PCI_MLY_TABLES_H_ */ 369
Indexes created Sun Sep 21 14:09:52 GMT 2025