1 /* $NetBSD: sscom_s3c2800.c,v 1.11 2022/09/27 06:36:43 skrll Exp $ */ 2 3 /* 4 * Copyright (c) 2002, 2003 Fujitsu Component Limited 5 * Copyright (c) 2002, 2003 Genetec Corporation 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. Neither the name of The Fujitsu Component Limited nor the name of 17 * Genetec corporation may not be used to endorse or promote products 18 * derived from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY FUJITSU COMPONENT LIMITED AND GENETEC 21 * CORPORATION ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, 22 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 23 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 24 * DISCLAIMED. IN NO EVENT SHALL FUJITSU COMPONENT LIMITED OR GENETEC 25 * CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 29 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 31 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 */ 34 35 #include <sys/cdefs.h> 36 __KERNEL_RCSID(0, "$NetBSD: sscom_s3c2800.c,v 1.11 2022/09/27 06:36:43 skrll Exp $"); 37 38 #include "opt_sscom.h" 39 #include "opt_ddb.h" 40 #include "opt_kgdb.h" 41 42 #include <sys/param.h> 43 #include <sys/systm.h> 44 #include <sys/ioctl.h> 45 #include <sys/select.h> 46 #include <sys/tty.h> 47 #include <sys/proc.h> 48 #include <sys/conf.h> 49 #include <sys/file.h> 50 #include <sys/uio.h> 51 #include <sys/kernel.h> 52 #include <sys/syslog.h> 53 #include <sys/types.h> 54 #include <sys/device.h> 55 #include <sys/timepps.h> 56 #include <sys/vnode.h> 57 58 #include <machine/intr.h> 59 #include <sys/bus.h> 60 61 #include <arm/s3c2xx0/s3c2800reg.h> 62 #include <arm/s3c2xx0/s3c2800var.h> 63 #include <arm/s3c2xx0/sscom_var.h> 64 #include <sys/termios.h> 65 66 static int sscom_match(device_t, cfdata_t, void *); 67 static void sscom_attach(device_t, device_t, void *); 68 69 CFATTACH_DECL_NEW(sscom, sizeof(struct sscom_softc), sscom_match, 70 sscom_attach, NULL, NULL); 71 72 const struct sscom_uart_info s3c2800_uart_config[] = { 73 /* UART 0 */ 74 { 75 0, 76 S3C2800_INT_TXD0, 77 S3C2800_INT_RXD0, 78 S3C2800_INT_UERR0, 79 S3C2800_UART0_BASE, 80 }, 81 /* UART 1 */ 82 { 83 1, 84 S3C2800_INT_TXD1, 85 S3C2800_INT_RXD1, 86 S3C2800_INT_UERR1, 87 S3C2800_UART1_BASE, 88 }, 89 }; 90 91 static int 92 sscom_match(device_t parent, cfdata_t cf, void *aux) 93 { 94 struct s3c2xx0_attach_args *sa = aux; 95 int unit = sa->sa_index; 96 97 return unit == 0 || unit == 1; 98 } 99 100 static void 101 s3c2800_change_txrx_interrupts(struct sscom_softc *sc, bool unmask_p, 102 u_int flags) 103 { 104 int intbits = 0; 105 if (flags & SSCOM_HW_RXINT) 106 intbits |= 1 << sc->sc_rx_irqno; 107 if (flags & SSCOM_HW_TXINT) 108 intbits |= 1 << sc->sc_tx_irqno; 109 if (unmask_p) { 110 s3c2xx0_unmask_interrupts(intbits); 111 } else { 112 s3c2xx0_mask_interrupts(intbits); 113 } 114 } 115 116 static void 117 sscom_attach(device_t parent, device_t self, void *aux) 118 { 119 struct sscom_softc *sc = device_private(self); 120 struct s3c2xx0_attach_args *sa = aux; 121 int unit = sa->sa_index; 122 bus_addr_t iobase = s3c2800_uart_config[unit].iobase; 123 124 printf( ": UART%d addr=%lx", sa->sa_index, iobase ); 125 126 sc->sc_dev = self; 127 sc->sc_iot = s3c2xx0_softc->sc_iot; 128 sc->sc_unit = unit; 129 sc->sc_frequency = s3c2xx0_softc->sc_pclk; 130 131 sc->sc_change_txrx_interrupts = s3c2800_change_txrx_interrupts; 132 133 sc->sc_rx_irqno = S3C2800_INT_RXD0 + sa->sa_index; 134 sc->sc_tx_irqno = S3C2800_INT_TXD0 + sa->sa_index; 135 136 if (bus_space_map(sc->sc_iot, iobase, SSCOM_SIZE, 0, &sc->sc_ioh)) { 137 printf( ": failed to map registers\n" ); 138 return; 139 } 140 141 printf("\n"); 142 143 s3c2800_intr_establish(s3c2800_uart_config[unit].tx_int, 144 IPL_SERIAL, IST_LEVEL, sscomtxintr, sc); 145 s3c2800_intr_establish(s3c2800_uart_config[unit].rx_int, 146 IPL_SERIAL, IST_LEVEL, sscomrxintr, sc); 147 s3c2800_intr_establish(s3c2800_uart_config[unit].err_int, 148 IPL_SERIAL, IST_LEVEL, sscomrxintr, sc); 149 sscom_disable_txrxint(sc); 150 151 sscom_attach_subr(sc); 152 } 153 154 155 156 int 157 s3c2800_sscom_cnattach(bus_space_tag_t iot, int unit, int rate, 158 int frequency, tcflag_t cflag) 159 { 160 return sscom_cnattach(iot, s3c2800_uart_config + unit, 161 rate, frequency, cflag); 162 } 163 164 #ifdef KGDB 165 int 166 s3c2800_sscom_kgdb_attach(bus_space_tag_t iot, int unit, int rate, 167 int frequency, tcflag_t cflag) 168 { 169 return sscom_kgdb_attach(iot, s3c2800_uart_config + unit, 170 rate, frequency, cflag); 171 } 172 #endif /* KGDB */ 173
Indexes created Sat Sep 27 14:09:57 GMT 2025