1 /* $NetBSD: if_skreg.h,v 1.34 2025/02/16 18:38:44 jakllsch Exp $ */ 2 3 /*- 4 * Copyright (c) 2003 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 17 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 18 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 19 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 20 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 23 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 24 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 26 * POSSIBILITY OF SUCH DAMAGE. 27 */ 28 /* $OpenBSD: if_skreg.h,v 1.10 2003/08/12 05:23:06 nate Exp $ */ 29 /* $OpenBSD: yukonreg.h,v 1.2 2003/08/12 05:23:06 nate Exp $ */ 30 /* $OpenBSD: if_skreg.h,v 1.41 2006/11/23 21:56:32 kettenis Exp $ */ 31 32 /* 33 * Copyright (c) 1997, 1998, 1999, 2000 34 * Bill Paul <wpaul (at) ctr.columbia.edu>. All rights reserved. 35 * 36 * Redistribution and use in source and binary forms, with or without 37 * modification, are permitted provided that the following conditions 38 * are met: 39 * 1. Redistributions of source code must retain the above copyright 40 * notice, this list of conditions and the following disclaimer. 41 * 2. Redistributions in binary form must reproduce the above copyright 42 * notice, this list of conditions and the following disclaimer in the 43 * documentation and/or other materials provided with the distribution. 44 * 3. All advertising materials mentioning features or use of this software 45 * must display the following acknowledgement: 46 * This product includes software developed by Bill Paul. 47 * 4. Neither the name of the author nor the names of any co-contributors 48 * may be used to endorse or promote products derived from this software 49 * without specific prior written permission. 50 * 51 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 52 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 53 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 54 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 55 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 56 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 57 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 58 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 59 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 60 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 61 * THE POSSIBILITY OF SUCH DAMAGE. 62 * 63 * $FreeBSD: /c/ncvs/src/sys/pci/if_skreg.h,v 1.9 2000/04/22 02:16:37 wpaul Exp $ 64 * $FreeBSD: /c/ncvs/src/sys/pci/xmaciireg.h,v 1.3 2000/04/22 02:16:37 wpaul Exp $ 65 */ 66 67 /* 68 * Copyright (c) 2003 Nathan L. Binkert <binkertn (at) umich.edu> 69 * 70 * Permission to use, copy, modify, and distribute this software for any 71 * purpose with or without fee is hereby granted, provided that the above 72 * copyright notice and this permission notice appear in all copies. 73 * 74 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 75 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 76 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 77 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 78 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 79 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 80 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 81 */ 82 83 #ifndef _DEV_PCI_IF_SKREG_H_ 84 #define _DEV_PCI_IF_SKREG_H_ 85 86 #include <net/if.h> 87 #include <net/if_ether.h> 88 #include <net/if_media.h> 89 90 91 /* 92 * GEnesis registers. The GEnesis chip has a 256-byte I/O window 93 * but internally it has a 16K register space. This 16K space is 94 * divided into 128-byte blocks. The first 128 bytes of the I/O 95 * window represent the first block, which is permanently mapped 96 * at the start of the window. The other 127 blocks can be mapped 97 * to the second 128 bytes of the I/O window by setting the desired 98 * block value in the RAP register in block 0. Not all of the 127 99 * blocks are actually used. Most registers are 32 bits wide, but 100 * there are a few 16-bit and 8-bit ones as well. 101 */ 102 103 104 /* Start of remappable register window. */ 105 #define SK_WIN_BASE 0x0080 106 107 /* Size of a window */ 108 #define SK_WIN_LEN 0x80 109 110 #define SK_WIN_MASK 0x3F80 111 #define SK_REG_MASK 0x7F 112 113 /* Compute the window of a given register (for the RAP register) */ 114 #define SK_WIN(reg) (((reg) & SK_WIN_MASK) / SK_WIN_LEN) 115 116 /* Compute the relative offset of a register within the window */ 117 #define SK_REG(reg) ((reg) & SK_REG_MASK) 118 119 #define SK_PORT_A 0 120 #define SK_PORT_B 1 121 122 /* 123 * Compute offset of port-specific register. Since there are two 124 * ports, there are two of some GEnesis modules (e.g. two sets of 125 * DMA queues, two sets of FIFO control registers, etc...). Normally, 126 * the block for port 0 is at offset 0x0 and the block for port 1 is 127 * at offset 0x80 (i.e. the next page over). However for the transmit 128 * BMUs and RAMbuffers, there are two blocks for each port: one for 129 * the sync transmit queue and one for the async queue (which we don't 130 * use). However instead of ordering them like this: 131 * TX sync 1 / TX sync 2 / TX async 1 / TX async 2 132 * SysKonnect has instead ordered them like this: 133 * TX sync 1 / TX async 1 / TX sync 2 / TX async 2 134 * This means that when referencing the TX BMU and RAMbuffer registers, 135 * we have to double the block offset (0x80 * 2) in order to reach the 136 * second queue. This prevents us from using the same formula 137 * (sk_port * 0x80) to compute the offsets for all of the port-specific 138 * blocks: we need an extra offset for the BMU and RAMbuffer registers. 139 * The simplest thing is to provide an extra argument to these macros: 140 * the 'skip' parameter. The 'skip' value is the number of extra pages 141 * for skip when computing the port0/port1 offsets. For most registers, 142 * the skip value is 0; for the BMU and RAMbuffer registers, it's 1. 143 */ 144 #define SK_IF_READ_4(sc_if, skip, reg) \ 145 sk_win_read_4(sc_if->sk_softc, reg + \ 146 ((sc_if->sk_port * (skip + 1)) * SK_WIN_LEN)) 147 #define SK_IF_READ_2(sc_if, skip, reg) \ 148 sk_win_read_2(sc_if->sk_softc, reg + \ 149 ((sc_if->sk_port * (skip + 1)) * SK_WIN_LEN)) 150 #define SK_IF_READ_1(sc_if, skip, reg) \ 151 sk_win_read_1(sc_if->sk_softc, reg + \ 152 ((sc_if->sk_port * (skip + 1)) * SK_WIN_LEN)) 153 154 #define SK_IF_WRITE_4(sc_if, skip, reg, val) \ 155 sk_win_write_4(sc_if->sk_softc, \ 156 reg + ((sc_if->sk_port * (skip + 1)) * SK_WIN_LEN), val) 157 #define SK_IF_WRITE_2(sc_if, skip, reg, val) \ 158 sk_win_write_2(sc_if->sk_softc, \ 159 reg + ((sc_if->sk_port * (skip + 1)) * SK_WIN_LEN), val) 160 #define SK_IF_WRITE_1(sc_if, skip, reg, val) \ 161 sk_win_write_1(sc_if->sk_softc, \ 162 reg + ((sc_if->sk_port * (skip + 1)) * SK_WIN_LEN), val) 163 164 /* Block 0 registers, permanently mapped at iobase. */ 165 #define SK_RAP 0x0000 166 #define SK_CSR 0x0004 167 #define SK_LED 0x0006 168 /* XXX 0x0007 B0_POWER_CTRL */ 169 #define SK_ISR 0x0008 /* interrupt source */ 170 #define SK_IMR 0x000C /* interrupt mask */ 171 #define SK_IESR 0x0010 /* interrupt hardware error source */ 172 #define SK_IEMR 0x0014 /* interrupt hardware error mask */ 173 #define SK_ISSR 0x0018 /* special interrupt source */ 174 #define SK_Y2_ISSR2 0x001C 175 #define SK_Y2_ISSR3 0x0020 176 #define SK_Y2_EISR 0x0024 177 #define SK_Y2_LISR 0x0028 178 #define SK_Y2_ICR 0x002C 179 #define SK_XM_IMR0 0x0020 180 #define SK_XM_ISR0 0x0028 181 #define SK_XM_PHYADDR0 0x0030 182 #define SK_XM_PHYDATA0 0x0034 183 #define SK_XM_IMR1 0x0040 184 #define SK_XM_ISR1 0x0048 185 #define SK_XM_PHYADDR1 0x0050 186 #define SK_XM_PHYDATA1 0x0054 187 #define SK_BMU_RX_CSR0 0x0060 188 #define SK_BMU_RX_CSR1 0x0064 189 #define SK_BMU_TXS_CSR0 0x0068 190 #define SK_BMU_TXA_CSR0 0x006C 191 #define SK_BMU_TXS_CSR1 0x0070 192 #define SK_BMU_TXA_CSR1 0x0074 193 194 /* SK_CSR register */ 195 #define SK_CSR_SW_RESET 0x0001 196 #define SK_CSR_SW_UNRESET 0x0002 197 #define SK_CSR_MASTER_RESET 0x0004 198 #define SK_CSR_MASTER_UNRESET 0x0008 199 #define SK_CSR_MASTER_STOP 0x0010 200 #define SK_CSR_MASTER_DONE 0x0020 201 #define SK_CSR_SW_IRQ_CLEAR 0x0040 202 #define SK_CSR_SW_IRQ_SET 0x0080 203 #define SK_CSR_SLOTSIZE 0x0100 /* 1 == 64 bits, 0 == 32 */ 204 #define SK_CSR_BUSCLOCK 0x0200 /* 1 == 33/66 MHz, = 33 */ 205 #define SK_CSR_ASF_OFF 0x1000 206 #define SK_CSR_ASF_ON 0x2000 207 #define SK_CSR_WOL_OFF __BIT(14) 208 #define SK_CSR_WOL_ON __BIT(15) 209 210 /* SK_LED register */ 211 #define SK_LED_GREEN_OFF 0x01 212 #define SK_LED_GREEN_ON 0x02 213 214 /* SK_ISR register */ 215 #define SK_ISR_TX2_AS_CHECK 0x00000001 216 #define SK_ISR_TX2_AS_EOF 0x00000002 217 #define SK_ISR_TX2_AS_EOB 0x00000004 218 #define SK_ISR_TX2_S_CHECK 0x00000008 219 #define SK_ISR_TX2_S_EOF 0x00000010 220 #define SK_ISR_TX2_S_EOB 0x00000020 221 #define SK_ISR_TX1_AS_CHECK 0x00000040 222 #define SK_ISR_TX1_AS_EOF 0x00000080 223 #define SK_ISR_TX1_AS_EOB 0x00000100 224 #define SK_ISR_TX1_S_CHECK 0x00000200 225 #define SK_ISR_TX1_S_EOF 0x00000400 226 #define SK_ISR_TX1_S_EOB 0x00000800 227 #define SK_ISR_RX2_CHECK 0x00001000 228 #define SK_ISR_RX2_EOF 0x00002000 229 #define SK_ISR_RX2_EOB 0x00004000 230 #define SK_ISR_RX1_CHECK 0x00008000 231 #define SK_ISR_RX1_EOF 0x00010000 232 #define SK_ISR_RX1_EOB 0x00020000 233 #define SK_ISR_LINK2_OFLOW 0x00040000 234 #define SK_ISR_MAC2 0x00080000 235 #define SK_ISR_LINK1_OFLOW 0x00100000 236 #define SK_ISR_MAC1 0x00200000 237 #define SK_ISR_TIMER 0x00400000 238 #define SK_ISR_EXTERNAL_REG 0x00800000 239 #define SK_ISR_SW 0x01000000 240 #define SK_ISR_I2C_RDY 0x02000000 241 #define SK_ISR_TX2_TIMEO 0x04000000 242 #define SK_ISR_TX1_TIMEO 0x08000000 243 #define SK_ISR_RX2_TIMEO 0x10000000 244 #define SK_ISR_RX1_TIMEO 0x20000000 245 #define SK_ISR_RSVD 0x40000000 246 #define SK_ISR_HWERR 0x80000000 247 248 /* SK_IMR register */ 249 #define SK_IMR_TX2_AS_CHECK 0x00000001 250 #define SK_IMR_TX2_AS_EOF 0x00000002 251 #define SK_IMR_TX2_AS_EOB 0x00000004 252 #define SK_IMR_TX2_S_CHECK 0x00000008 253 #define SK_IMR_TX2_S_EOF 0x00000010 254 #define SK_IMR_TX2_S_EOB 0x00000020 255 #define SK_IMR_TX1_AS_CHECK 0x00000040 256 #define SK_IMR_TX1_AS_EOF 0x00000080 257 #define SK_IMR_TX1_AS_EOB 0x00000100 258 #define SK_IMR_TX1_S_CHECK 0x00000200 259 #define SK_IMR_TX1_S_EOF 0x00000400 260 #define SK_IMR_TX1_S_EOB 0x00000800 261 #define SK_IMR_RX2_CHECK 0x00001000 262 #define SK_IMR_RX2_EOF 0x00002000 263 #define SK_IMR_RX2_EOB 0x00004000 264 #define SK_IMR_RX1_CHECK 0x00008000 265 #define SK_IMR_RX1_EOF 0x00010000 266 #define SK_IMR_RX1_EOB 0x00020000 267 #define SK_IMR_LINK2_OFLOW 0x00040000 268 #define SK_IMR_MAC2 0x00080000 269 #define SK_IMR_LINK1_OFLOW 0x00100000 270 #define SK_IMR_MAC1 0x00200000 271 #define SK_IMR_TIMER 0x00400000 272 #define SK_IMR_EXTERNAL_REG 0x00800000 273 #define SK_IMR_SW 0x01000000 274 #define SK_IMR_I2C_RDY 0x02000000 275 #define SK_IMR_TX2_TIMEO 0x04000000 276 #define SK_IMR_TX1_TIMEO 0x08000000 277 #define SK_IMR_RX2_TIMEO 0x10000000 278 #define SK_IMR_RX1_TIMEO 0x20000000 279 #define SK_IMR_RSVD 0x40000000 280 #define SK_IMR_HWERR 0x80000000 281 282 #define SK_INTRS1 \ 283 (SK_IMR_RX1_EOF|SK_IMR_TX1_S_EOF|SK_IMR_MAC1) 284 285 #define SK_INTRS2 \ 286 (SK_IMR_RX2_EOF|SK_IMR_TX2_S_EOF|SK_IMR_MAC2) 287 288 #define SK_Y2_IMR_TX1_AS_CHECK 0x00000001 289 #define SK_Y2_IMR_TX1_S_CHECK 0x00000002 290 #define SK_Y2_IMR_RX1_CHECK 0x00000004 291 #define SK_Y2_IMR_MAC1 0x00000008 292 #define SK_Y2_IMR_PHY1 0x00000010 293 #define SK_Y2_IMR_TX2_AS_CHECK 0x00000100 294 #define SK_Y2_IMR_TX2_S_CHECK 0x00000200 295 #define SK_Y2_IMR_RX2_CHECK 0x00000400 296 #define SK_Y2_IMR_MAC2 0x00000800 297 #define SK_Y2_IMR_PHY2 0x00001000 298 #define SK_Y2_IMR_TIMER 0x01000000 299 #define SK_Y2_IMR_SW 0x02000000 300 #define SK_Y2_IMR_ASF 0x20000000 301 #define SK_Y2_IMR_BMU 0x40000000 302 #define SK_Y2_IMR_HWERR 0x80000000 303 304 #define SK_Y2_INTRS1 \ 305 (SK_Y2_IMR_RX1_CHECK|SK_Y2_IMR_TX1_AS_CHECK \ 306 |SK_Y2_IMR_MAC1|SK_Y2_IMR_PHY1) 307 308 #define SK_Y2_INTRS2 \ 309 (SK_Y2_IMR_RX2_CHECK|SK_Y2_IMR_TX2_AS_CHECK \ 310 |SK_Y2_IMR_MAC2|SK_Y2_IMR_PHY2) 311 312 /* SK_IESR register */ 313 #define SK_IESR_PAR_RX2 0x00000001 314 #define SK_IESR_PAR_RX1 0x00000002 315 #define SK_IESR_PAR_MAC2 0x00000004 316 #define SK_IESR_PAR_MAC1 0x00000008 317 #define SK_IESR_PAR_WR_RAM 0x00000010 318 #define SK_IESR_PAR_RD_RAM 0x00000020 319 #define SK_IESR_NO_TSTAMP_MAC2 0x00000040 320 #define SK_IESR_NO_TSTAMO_MAC1 0x00000080 321 #define SK_IESR_NO_STS_MAC2 0x00000100 322 #define SK_IESR_NO_STS_MAC1 0x00000200 323 #define SK_IESR_IRQ_STS 0x00000400 324 #define SK_IESR_MASTERERR 0x00000800 325 326 /* SK_IEMR register */ 327 #define SK_IEMR_PAR_RX2 0x00000001 328 #define SK_IEMR_PAR_RX1 0x00000002 329 #define SK_IEMR_PAR_MAC2 0x00000004 330 #define SK_IEMR_PAR_MAC1 0x00000008 331 #define SK_IEMR_PAR_WR_RAM 0x00000010 332 #define SK_IEMR_PAR_RD_RAM 0x00000020 333 #define SK_IEMR_NO_TSTAMP_MAC2 0x00000040 334 #define SK_IEMR_NO_TSTAMO_MAC1 0x00000080 335 #define SK_IEMR_NO_STS_MAC2 0x00000100 336 #define SK_IEMR_NO_STS_MAC1 0x00000200 337 #define SK_IEMR_IRQ_STS 0x00000400 338 #define SK_IEMR_MASTERERR 0x00000800 339 340 /* Block 2 */ 341 #define SK_MAC0_0 0x0100 342 #define SK_MAC0_1 0x0104 343 #define SK_MAC1_0 0x0108 344 #define SK_MAC1_1 0x010C 345 #define SK_MAC2_0 0x0110 346 #define SK_MAC2_1 0x0114 347 #define SK_CONNTYPE 0x0118 348 #define SK_PMDTYPE 0x0119 349 #define SK_CONFIG 0x011A 350 #define SK_CHIPVER 0x011B 351 #define SK_EPROM0 0x011C 352 #define SK_EPROM1 0x011D /* yukon/genesis */ 353 #define SK_Y2_CLKGATE 0x011D /* yukon 2 */ 354 #define SK_EPROM2 0x011E /* yukon/genesis */ 355 #define SK_Y2_HWRES 0x011E /* yukon 2 */ 356 #define SK_EPROM3 0x011F 357 #define SK_EP_ADDR 0x0120 358 #define SK_EP_DATA 0x0124 359 #define SK_EP_LOADCTL 0x0128 360 #define SK_EP_LOADTST 0x0129 361 #define SK_TIMERINIT 0x0130 362 #define SK_TIMER 0x0134 363 #define SK_TIMERCTL 0x0138 364 #define SK_TIMERTST 0x0139 365 #define SK_IMTIMERINIT 0x0140 366 #define SK_IMTIMER 0x0144 367 #define SK_IMTIMERCTL 0x0148 368 #define SK_IMTIMERTST 0x0149 369 #define SK_IMMR 0x014C 370 #define SK_IHWEMR 0x0150 371 #define SK_TESTCTL1 0x0158 372 #define SK_TESTCTL2 0x0159 373 #define SK_GPIO 0x015C 374 #define SK_I2CHWCTL 0x0160 375 #define SK_I2CHWDATA 0x0164 376 #define SK_I2CHWIRQ 0x0168 377 #define SK_I2CSW 0x016C 378 #define SK_BLNKINIT 0x0170 379 #define SK_BLNKCOUNT 0x0174 380 #define SK_BLNKCTL 0x0178 381 #define SK_BLNKSTS 0x0179 382 #define SK_BLNKTST 0x017A 383 384 /* Values for SK_CHIPVER */ 385 #define SK_GENESIS 0x0A 386 #define SK_YUKON 0xB0 387 #define SK_YUKON_LITE 0xB1 388 #define SK_YUKON_LP 0xB2 389 #define SK_YUKON_XL 0xB3 390 #define SK_YUKON_EC_U 0xB4 391 #define SK_YUKON_EX 0xB5 392 #define SK_YUKON_EC 0xB6 393 #define SK_YUKON_FE 0xB7 394 #define SK_YUKON_FE_P 0xB8 395 #define SK_YUKON_SUPR 0xB9 396 #define SK_YUKON_ULTRA2 0xBA 397 #define SK_YUKON_OPTIMA 0xBC 398 #define SK_YUKON_PRM 0xBD 399 #define SK_YUKON_OPTIMA2 0xBE 400 #define SK_YUKON_FAMILY(x) ((x) & 0xB0) 401 402 #define SK_IS_GENESIS(sc) \ 403 ((sc)->sk_type == SK_GENESIS) 404 #define SK_IS_YUKON(sc) \ 405 ((sc)->sk_type >= SK_YUKON && (sc)->sk_type <= SK_YUKON_LP) 406 #define SK_IS_YUKON2(sc) \ 407 ((sc)->sk_type >= SK_YUKON_XL && (sc)->sk_type <= SK_YUKON_OPTIMA2) 408 409 /* Known revisions in SK_CONFIG */ 410 #define SK_YUKON_LITE_REV_A0 0x0 /* invented, see test in skc_attach */ 411 #define SK_YUKON_LITE_REV_A1 0x3 412 #define SK_YUKON_LITE_REV_A3 0x7 413 414 #define SK_YUKON_XL_REV_A0 0x0 415 #define SK_YUKON_XL_REV_A1 0x1 416 #define SK_YUKON_XL_REV_A2 0x2 417 #define SK_YUKON_XL_REV_A3 0x3 418 419 #define SK_YUKON_EC_REV_A1 0x0 420 #define SK_YUKON_EC_REV_A2 0x1 421 #define SK_YUKON_EC_REV_A3 0x2 422 423 #define SK_YUKON_EC_U_REV_A0 0x1 424 #define SK_YUKON_EC_U_REV_A1 0x2 425 #define SK_YUKON_EC_U_REV_B0 0x3 426 #define SK_YUKON_EC_U_REV_B1 0x5 427 428 #define SK_YUKON_FE_REV_A1 0x1 429 #define SK_YUKON_FE_REV_A2 0x2 430 431 #define SK_YUKON_FE_P_REV_A0 0x0 432 433 #define SK_YUKON_EX_REV_A0 0x1 434 #define SK_YUKON_EX_REV_B0 0x2 435 436 #define SK_YUKON_SUPR_REV_A0 0x0 437 #define SK_YUKON_SUPR_REV_B0 0x1 438 #define SK_YUKON_SUPR_REV_B1 0x3 439 440 #define SK_YUKON_PRM_REV_Z1 0x1 441 #define SK_YUKON_PRM_REV_A0 0x2 442 443 /* Workaround */ 444 #define SK_WA_43_418 0x01 445 #define SK_WA_4109 0x02 446 447 #define SK_IMCTL_IRQ_CLEAR 0x01 448 #define SK_IMCTL_STOP 0x02 449 #define SK_IMCTL_START 0x04 450 451 /* Number of ticks per usec for interrupt moderation */ 452 #define SK_IMTIMER_TICKS_YUKON_FE_P 50 453 #define SK_IMTIMER_TICKS_GENESIS 53 454 #define SK_IMTIMER_TICKS_YUKON 78 455 #define SK_IMTIMER_TICKS_YUKON_FE 100 456 #define SK_IMTIMER_TICKS_YUKON_EC 125 457 #define SK_IMTIMER_TICKS_YUKON_XL 156 458 #define SK_IM_USECS(x) ((x) * imtimer_ticks) 459 460 #define SK_IM_MIN 0 461 #define SK_IM_DEFAULT 1000 462 #define SK_IM_MAX 10000 463 /* 464 * The SK_EPROM0 register contains a byte that describes the 465 * amount of SRAM mounted on the NIC. The value also tells if 466 * the chips are 64K or 128K. This affects the RAMbuffer address 467 * offset that we need to use. 468 */ 469 #define SK_RAMSIZE_512K_64 0x1 470 #define SK_RAMSIZE_1024K_128 0x2 471 #define SK_RAMSIZE_1024K_64 0x3 472 #define SK_RAMSIZE_2048K_128 0x4 473 474 #define SK_RBOFF_0 0x0 475 #define SK_RBOFF_80000 0x80000 476 477 /* 478 * SK_EEPROM1 contains the PHY type, which may be XMAC for 479 * fiber-based cards or BCOM for 1000baseT cards with a Broadcom 480 * PHY. 481 */ 482 #define SK_PHYTYPE_XMAC 0 /* integrated XMAC II PHY */ 483 #define SK_PHYTYPE_BCOM 1 /* Broadcom BCM5400 */ 484 #define SK_PHYTYPE_LONE 2 /* Level One LXT1000 */ 485 #define SK_PHYTYPE_NAT 3 /* National DP83891 */ 486 #define SK_PHYTYPE_MARV_COPPER 4 /* Marvell 88E1011S */ 487 #define SK_PHYTYPE_MARV_FIBER 5 /* Marvell 88E1011S (fiber) */ 488 489 /* 490 * PHY addresses. 491 */ 492 #define SK_PHYADDR_XMAC 0x0 493 #define SK_PHYADDR_BCOM 0x1 494 #define SK_PHYADDR_LONE 0x3 495 #define SK_PHYADDR_NAT 0x0 496 #define SK_PHYADDR_MARV 0x0 497 498 #define SK_CONFIG_SINGLEMAC 0x01 499 #define SK_CONFIG_DIS_DSL_CLK 0x02 500 501 #define SK_PMD_1000BASETX_ALT 0x31 502 #define SK_PMD_1000BASECX 0x43 503 #define SK_PMD_1000BASELX 0x4C 504 #define SK_PMD_1000BASESX 0x53 505 #define SK_PMD_1000BASETX 0x54 506 507 /* GPIO bits */ 508 #define SK_GPIO_DAT0 0x00000001 509 #define SK_GPIO_DAT1 0x00000002 510 #define SK_GPIO_DAT2 0x00000004 511 #define SK_GPIO_DAT3 0x00000008 512 #define SK_GPIO_DAT4 0x00000010 513 #define SK_GPIO_DAT5 0x00000020 514 #define SK_GPIO_DAT6 0x00000040 515 #define SK_GPIO_DAT7 0x00000080 516 #define SK_GPIO_DAT8 0x00000100 517 #define SK_GPIO_DAT9 0x00000200 518 #define SK_Y2_GPIO_STAT_RACE_DIS 0x00002000 519 #define SK_GPIO_DIR0 0x00010000 520 #define SK_GPIO_DIR1 0x00020000 521 #define SK_GPIO_DIR2 0x00040000 522 #define SK_GPIO_DIR3 0x00080000 523 #define SK_GPIO_DIR4 0x00100000 524 #define SK_GPIO_DIR5 0x00200000 525 #define SK_GPIO_DIR6 0x00400000 526 #define SK_GPIO_DIR7 0x00800000 527 #define SK_GPIO_DIR8 0x01000000 528 #define SK_GPIO_DIR9 0x02000000 529 530 #define SK_Y2_CLKGATE_LINK2_INACTIVE 0x80 /* port 2 inactive */ 531 #define SK_Y2_CLKGATE_LINK2_GATE_DIS 0x40 /* disable clock gate, 2 */ 532 #define SK_Y2_CLKGATE_LINK2_CORE_DIS 0x20 /* disable core clock, 2 */ 533 #define SK_Y2_CLKGATE_LINK2_PCI_DIS 0x10 /* disable pci clock, 2 */ 534 #define SK_Y2_CLKGATE_LINK1_INACTIVE 0x08 /* port 1 inactive */ 535 #define SK_Y2_CLKGATE_LINK1_GATE_DIS 0x04 /* disable clock gate, 1 */ 536 #define SK_Y2_CLKGATE_LINK1_CORE_DIS 0x02 /* disable core clock, 1 */ 537 #define SK_Y2_CLKGATE_LINK1_PCI_DIS 0x01 /* disable pci clock, 1 */ 538 539 #define SK_Y2_HWRES_LINK_1 0x01 540 #define SK_Y2_HWRES_LINK_2 0x02 541 #define SK_Y2_HWRES_LINK_MASK (SK_Y2_HWRES_LINK_1 | SK_Y2_HWRES_LINK_2) 542 #define SK_Y2_HWRES_LINK_DUAL (SK_Y2_HWRES_LINK_1 | SK_Y2_HWRES_LINK_2) 543 544 /* Block 3 Ram interface and MAC arbiter registers */ 545 #define SK_RAMADDR 0x0180 546 #define SK_RAMDATA0 0x0184 547 #define SK_RAMDATA1 0x0188 548 #define SK_TO0 0x0190 549 #define SK_TO1 0x0191 550 #define SK_TO2 0x0192 551 #define SK_TO3 0x0193 552 #define SK_TO4 0x0194 553 #define SK_TO5 0x0195 554 #define SK_TO6 0x0196 555 #define SK_TO7 0x0197 556 #define SK_TO8 0x0198 557 #define SK_TO9 0x0199 558 #define SK_TO10 0x019A 559 #define SK_TO11 0x019B 560 #define SK_RITIMEO_TMR 0x019C 561 #define SK_RAMCTL 0x01A0 562 #define SK_RITIMER_TST 0x01A2 563 564 #define SK_RAMCTL_RESET 0x0001 565 #define SK_RAMCTL_UNRESET 0x0002 566 #define SK_RAMCTL_CLR_IRQ_WPAR 0x0100 567 #define SK_RAMCTL_CLR_IRQ_RPAR 0x0200 568 569 /* Mac arbiter registers */ 570 #define SK_MINIT_RX1 0x01B0 571 #define SK_MINIT_RX2 0x01B1 572 #define SK_MINIT_TX1 0x01B2 573 #define SK_MINIT_TX2 0x01B3 574 #define SK_MTIMEO_RX1 0x01B4 575 #define SK_MTIMEO_RX2 0x01B5 576 #define SK_MTIMEO_TX1 0x01B6 577 #define SK_MTIEMO_TX2 0x01B7 578 #define SK_MACARB_CTL 0x01B8 579 #define SK_MTIMER_TST 0x01BA 580 #define SK_RCINIT_RX1 0x01C0 581 #define SK_RCINIT_RX2 0x01C1 582 #define SK_RCINIT_TX1 0x01C2 583 #define SK_RCINIT_TX2 0x01C3 584 #define SK_RCTIMEO_RX1 0x01C4 585 #define SK_RCTIMEO_RX2 0x01C5 586 #define SK_RCTIMEO_TX1 0x01C6 587 #define SK_RCTIMEO_TX2 0x01C7 588 #define SK_RECOVERY_CTL 0x01C8 589 #define SK_RCTIMER_TST 0x01CA 590 591 /* Packet arbiter registers */ 592 #define SK_RXPA1_TINIT 0x01D0 593 #define SK_RXPA2_TINIT 0x01D4 594 #define SK_TXPA1_TINIT 0x01D8 595 #define SK_TXPA2_TINIT 0x01DC 596 #define SK_RXPA1_TIMEO 0x01E0 597 #define SK_RXPA2_TIMEO 0x01E4 598 #define SK_TXPA1_TIMEO 0x01E8 599 #define SK_TXPA2_TIMEO 0x01EC 600 #define SK_PKTARB_CTL 0x01F0 601 #define SK_PKTATB_TST 0x01F2 602 603 #define SK_PKTARB_TIMEOUT 0x2000 604 605 #define SK_PKTARBCTL_RESET 0x0001 606 #define SK_PKTARBCTL_UNRESET 0x0002 607 #define SK_PKTARBCTL_RXTO1_OFF 0x0004 608 #define SK_PKTARBCTL_RXTO1_ON 0x0008 609 #define SK_PKTARBCTL_RXTO2_OFF 0x0010 610 #define SK_PKTARBCTL_RXTO2_ON 0x0020 611 #define SK_PKTARBCTL_TXTO1_OFF 0x0040 612 #define SK_PKTARBCTL_TXTO1_ON 0x0080 613 #define SK_PKTARBCTL_TXTO2_OFF 0x0100 614 #define SK_PKTARBCTL_TXTO2_ON 0x0200 615 #define SK_PKTARBCTL_CLR_IRQ_RXTO1 0x0400 616 #define SK_PKTARBCTL_CLR_IRQ_RXTO2 0x0800 617 #define SK_PKTARBCTL_CLR_IRQ_TXTO1 0x1000 618 #define SK_PKTARBCTL_CLR_IRQ_TXTO2 0x2000 619 620 #define SK_MINIT_XMAC_B2 54 621 #define SK_MINIT_XMAC_C1 63 622 623 #define SK_MACARBCTL_RESET 0x0001 624 #define SK_MACARBCTL_UNRESET 0x0002 625 #define SK_MACARBCTL_FASTOE_OFF 0x0004 626 #define SK_MACARBCRL_FASTOE_ON 0x0008 627 628 #define SK_RCINIT_XMAC_B2 54 629 #define SK_RCINIT_XMAC_C1 0 630 631 #define SK_RECOVERYCTL_RX1_OFF 0x0001 632 #define SK_RECOVERYCTL_RX1_ON 0x0002 633 #define SK_RECOVERYCTL_RX2_OFF 0x0004 634 #define SK_RECOVERYCTL_RX2_ON 0x0008 635 #define SK_RECOVERYCTL_TX1_OFF 0x0010 636 #define SK_RECOVERYCTL_TX1_ON 0x0020 637 #define SK_RECOVERYCTL_TX2_OFF 0x0040 638 #define SK_RECOVERYCTL_TX2_ON 0x0080 639 640 #define SK_RECOVERY_XMAC_B2 \ 641 (SK_RECOVERYCTL_RX1_ON|SK_RECOVERYCTL_RX2_ON| \ 642 SK_RECOVERYCTL_TX1_ON|SK_RECOVERYCTL_TX2_ON) 643 644 #define SK_RECOVERY_XMAC_C1 \ 645 (SK_RECOVERYCTL_RX1_OFF|SK_RECOVERYCTL_RX2_OFF| \ 646 SK_RECOVERYCTL_TX1_OFF|SK_RECOVERYCTL_TX2_OFF) 647 648 /* Block 4 -- TX Arbiter MAC 1 */ 649 #define SK_TXAR1_TIMERINIT 0x0200 650 #define SK_TXAR1_TIMERVAL 0x0204 651 #define SK_TXAR1_LIMITINIT 0x0208 652 #define SK_TXAR1_LIMITCNT 0x020C 653 #define SK_TXAR1_COUNTERCTL 0x0210 654 #define SK_TXAR1_COUNTERTST 0x0212 655 #define SK_TXAR1_COUNTERSTS 0x0212 656 657 /* Block 5 -- TX Arbiter MAC 2 */ 658 #define SK_TXAR2_TIMERINIT 0x0280 659 #define SK_TXAR2_TIMERVAL 0x0284 660 #define SK_TXAR2_LIMITINIT 0x0288 661 #define SK_TXAR2_LIMITCNT 0x028C 662 #define SK_TXAR2_COUNTERCTL 0x0290 663 #define SK_TXAR2_COUNTERTST 0x0291 664 #define SK_TXAR2_COUNTERSTS 0x0292 665 666 #define SK_TXARCTL_OFF 0x01 667 #define SK_TXARCTL_ON 0x02 668 #define SK_TXARCTL_RATECTL_OFF 0x04 669 #define SK_TXARCTL_RATECTL_ON 0x08 670 #define SK_TXARCTL_ALLOC_OFF 0x10 671 #define SK_TXARCTL_ALLOC_ON 0x20 672 #define SK_TXARCTL_FSYNC_OFF 0x40 673 #define SK_TXARCTL_FSYNC_ON 0x80 674 675 /* Block 6 -- External registers */ 676 #define SK_EXTREG_BASE 0x300 677 #define SK_EXTREG_END 0x37C 678 679 /* Block 7 -- PCI config registers */ 680 #define SK_PCI_BASE 0x0380 681 #define SK_PCI_END 0x03FC 682 683 /* Compute offset of mirrored PCI register */ 684 #define SK_PCI_REG(reg) ((reg) + SK_PCI_BASE) 685 686 /* Block 8 -- RX queue 1 */ 687 #define SK_RXQ1_BUFCNT 0x0400 688 #define SK_RXQ1_BUFCTL 0x0402 689 #define SK_RXQ1_NEXTDESC 0x0404 690 #define SK_RXQ1_RXBUF_LO 0x0408 691 #define SK_RXQ1_RXBUF_HI 0x040C 692 #define SK_RXQ1_RXSTAT 0x0410 693 #define SK_RXQ1_TIMESTAMP 0x0414 694 #define SK_RXQ1_CSUM1 0x0418 695 #define SK_RXQ1_CSUM2 0x041A 696 #define SK_RXQ1_CSUM1_START 0x041C 697 #define SK_RXQ1_CSUM2_START 0x041E 698 #define SK_RXQ1_CURADDR_LO 0x0420 699 #define SK_RXQ1_CURADDR_HI 0x0424 700 #define SK_RXQ1_CURCNT_LO 0x0428 701 #define SK_RXQ1_CURCNT_HI 0x042C 702 #define SK_RXQ1_CURBYTES 0x0430 703 #define SK_RXQ1_BMU_CSR 0x0434 704 #define SK_RXQ1_WATERMARK 0x0438 705 #define SK_RXQ1_FLAG 0x043A 706 #define SK_RXQ1_TEST1 0x043C 707 #define SK_RXQ1_TEST2 0x0440 708 #define SK_RXQ1_TEST3 0x0444 709 /* yukon-2 only */ 710 #define SK_RXQ1_Y2_WM 0x0440 711 #define SK_RXQ1_Y2_AL 0x0442 712 #define SK_RXQ1_Y2_RSP 0x0444 713 #define SK_RXQ1_Y2_RSL 0x0446 714 #define SK_RXQ1_Y2_RP 0x0448 715 #define SK_RXQ1_Y2_RL 0x044A 716 #define SK_RXQ1_Y2_WP 0x044C 717 #define SK_RXQ1_Y2_WSP 0x044D 718 #define SK_RXQ1_Y2_WL 0x044E 719 #define SK_RXQ1_Y2_WSL 0x044F 720 /* yukon-2 only (prefetch unit) */ 721 #define SK_RXQ1_Y2_PREF_CSR 0x0450 722 #define SK_RXQ1_Y2_PREF_LIDX 0x0454 723 #define SK_RXQ1_Y2_PREF_ADDRLO 0x0458 724 #define SK_RXQ1_Y2_PREF_ADDRHI 0x045C 725 #define SK_RXQ1_Y2_PREF_GETIDX 0x0460 726 #define SK_RXQ1_Y2_PREF_PUTIDX 0x0464 727 #define SK_RXQ1_Y2_PREF_FIFOWP 0x0470 728 #define SK_RXQ1_Y2_PREF_FIFORP 0x0474 729 #define SK_RXQ1_Y2_PREF_FIFOWM 0x0478 730 #define SK_RXQ1_Y2_PREF_FIFOLV 0x047C 731 732 /* Block 9 -- RX queue 2 */ 733 #define SK_RXQ2_BUFCNT 0x0480 734 #define SK_RXQ2_BUFCTL 0x0482 735 #define SK_RXQ2_NEXTDESC 0x0484 736 #define SK_RXQ2_RXBUF_LO 0x0488 737 #define SK_RXQ2_RXBUF_HI 0x048C 738 #define SK_RXQ2_RXSTAT 0x0490 739 #define SK_RXQ2_TIMESTAMP 0x0494 740 #define SK_RXQ2_CSUM1 0x0498 741 #define SK_RXQ2_CSUM2 0x049A 742 #define SK_RXQ2_CSUM1_START 0x049C 743 #define SK_RXQ2_CSUM2_START 0x049E 744 #define SK_RXQ2_CURADDR_LO 0x04A0 745 #define SK_RXQ2_CURADDR_HI 0x04A4 746 #define SK_RXQ2_CURCNT_LO 0x04A8 747 #define SK_RXQ2_CURCNT_HI 0x04AC 748 #define SK_RXQ2_CURBYTES 0x04B0 749 #define SK_RXQ2_BMU_CSR 0x04B4 750 #define SK_RXQ2_WATERMARK 0x04B8 751 #define SK_RXQ2_FLAG 0x04BA 752 #define SK_RXQ2_TEST1 0x04BC 753 #define SK_RXQ2_TEST2 0x04C0 754 #define SK_RXQ2_TEST3 0x04C4 755 /* yukon-2 only */ 756 #define SK_RXQ2_Y2_WM 0x04C0 757 #define SK_RXQ2_Y2_AL 0x04C2 758 #define SK_RXQ2_Y2_RSP 0x04C4 759 #define SK_RXQ2_Y2_RSL 0x04C6 760 #define SK_RXQ2_Y2_RP 0x04C8 761 #define SK_RXQ2_Y2_RL 0x04CA 762 #define SK_RXQ2_Y2_WP 0x04CC 763 #define SK_RXQ2_Y2_WSP 0x04CD 764 #define SK_RXQ2_Y2_WL 0x04CE 765 #define SK_RXQ2_Y2_WSL 0x04CF 766 /* yukon-2 only (prefetch unit) */ 767 #define SK_RXQ2_Y2_PREF_CSR 0x04D0 768 #define SK_RXQ2_Y2_PREF_LIDX 0x04D4 769 #define SK_RXQ2_Y2_PREF_ADDRLO 0x04D8 770 #define SK_RXQ2_Y2_PREF_ADDRHI 0x04DC 771 #define SK_RXQ2_Y2_PREF_GETIDX 0x04E0 772 #define SK_RXQ2_Y2_PREF_PUTIDX 0x04E4 773 #define SK_RXQ2_Y2_PREF_FIFOWP 0x04F0 774 #define SK_RXQ2_Y2_PREF_FIFORP 0x04F4 775 #define SK_RXQ2_Y2_PREF_FIFOWM 0x04F8 776 #define SK_RXQ2_Y2_PREF_FIFOLV 0x04FC 777 778 #define SK_RXBMU_CLR_IRQ_ERR 0x00000001 779 #define SK_RXBMU_CLR_IRQ_EOF 0x00000002 780 #define SK_RXBMU_CLR_IRQ_EOB 0x00000004 781 #define SK_RXBMU_CLR_IRQ_PAR 0x00000008 782 #define SK_RXBMU_RX_START 0x00000010 783 #define SK_RXBMU_RX_STOP 0x00000020 784 #define SK_RXBMU_POLL_OFF 0x00000040 785 #define SK_RXBMU_POLL_ON 0x00000080 786 #define SK_RXBMU_TRANSFER_SM_RESET 0x00000100 787 #define SK_RXBMU_TRANSFER_SM_UNRESET 0x00000200 788 #define SK_RXBMU_DESCWR_SM_RESET 0x00000400 789 #define SK_RXBMU_DESCWR_SM_UNRESET 0x00000800 790 #define SK_RXBMU_DESCRD_SM_RESET 0x00001000 791 #define SK_RXBMU_DESCRD_SM_UNRESET 0x00002000 792 #define SK_RXBMU_SUPERVISOR_SM_RESET 0x00004000 793 #define SK_RXBMU_SUPERVISOR_SM_UNRESET 0x00008000 794 #define SK_RXBMU_PFI_SM_RESET 0x00010000 795 #define SK_RXBMU_PFI_SM_UNRESET 0x00020000 796 #define SK_RXBMU_FIFO_RESET 0x00040000 797 #define SK_RXBMU_FIFO_UNRESET 0x00080000 798 #define SK_RXBMU_DESC_RESET 0x00100000 799 #define SK_RXBMU_DESC_UNRESET 0x00200000 800 #define SK_RXBMU_SUPERVISOR_IDLE 0x01000000 801 802 #define SK_RXBMU_ONLINE \ 803 (SK_RXBMU_TRANSFER_SM_UNRESET|SK_RXBMU_DESCWR_SM_UNRESET| \ 804 SK_RXBMU_DESCRD_SM_UNRESET|SK_RXBMU_SUPERVISOR_SM_UNRESET| \ 805 SK_RXBMU_PFI_SM_UNRESET|SK_RXBMU_FIFO_UNRESET| \ 806 SK_RXBMU_DESC_UNRESET) 807 808 #define SK_RXBMU_OFFLINE \ 809 (SK_RXBMU_TRANSFER_SM_RESET|SK_RXBMU_DESCWR_SM_RESET| \ 810 SK_RXBMU_DESCRD_SM_RESET|SK_RXBMU_SUPERVISOR_SM_RESET| \ 811 SK_RXBMU_PFI_SM_RESET|SK_RXBMU_FIFO_RESET| \ 812 SK_RXBMU_DESC_RESET) 813 814 /* Block 12 -- TX sync queue 1 */ 815 #define SK_TXQS1_BUFCNT 0x0600 816 #define SK_TXQS1_BUFCTL 0x0602 817 #define SK_TXQS1_NEXTDESC 0x0604 818 #define SK_TXQS1_RXBUF_LO 0x0608 819 #define SK_TXQS1_RXBUF_HI 0x060C 820 #define SK_TXQS1_RXSTAT 0x0610 821 #define SK_TXQS1_CSUM_STARTVAL 0x0614 822 #define SK_TXQS1_CSUM_STARTPOS 0x0618 823 #define SK_TXQS1_CSUM_WRITEPOS 0x061A 824 #define SK_TXQS1_CURADDR_LO 0x0620 825 #define SK_TXQS1_CURADDR_HI 0x0624 826 #define SK_TXQS1_CURCNT_LO 0x0628 827 #define SK_TXQS1_CURCNT_HI 0x062C 828 #define SK_TXQS1_CURBYTES 0x0630 829 #define SK_TXQS1_BMU_CSR 0x0634 830 #define SK_TXQS1_WATERMARK 0x0638 831 #define SK_TXQS1_FLAG 0x063A 832 #define SK_TXQS1_TEST1 0x063C 833 #define SK_TXQS1_TEST2 0x0640 834 #define SK_TXQS1_TEST3 0x0644 835 /* yukon-2 only (prefetch unit) */ 836 #define SK_TXQS1_Y2_PREF_CSR 0x0650 837 #define SK_TXQS1_Y2_PREF_LIDX 0x0654 838 #define SK_TXQS1_Y2_PREF_ADDRLO 0x0658 839 #define SK_TXQS1_Y2_PREF_ADDRHI 0x065C 840 #define SK_TXQS1_Y2_PREF_GETIDX 0x0660 841 #define SK_TXQS1_Y2_PREF_PUTIDX 0x0664 842 #define SK_TXQS1_Y2_PREF_FIFOWP 0x0670 843 #define SK_TXQS1_Y2_PREF_FIFORP 0x0674 844 #define SK_TXQS1_Y2_PREF_FIFOWM 0x0678 845 #define SK_TXQS1_Y2_PREF_FIFOLV 0x067C 846 847 /* Block 13 -- TX async queue 1 */ 848 #define SK_TXQA1_BUFCNT 0x0680 849 #define SK_TXQA1_BUFCTL 0x0682 850 #define SK_TXQA1_NEXTDESC 0x0684 851 #define SK_TXQA1_RXBUF_LO 0x0688 852 #define SK_TXQA1_RXBUF_HI 0x068C 853 #define SK_TXQA1_RXSTAT 0x0690 854 #define SK_TXQA1_CSUM_STARTVAL 0x0694 855 #define SK_TXQA1_CSUM_STARTPOS 0x0698 856 #define SK_TXQA1_CSUM_WRITEPOS 0x069A 857 #define SK_TXQA1_CURADDR_LO 0x06A0 858 #define SK_TXQA1_CURADDR_HI 0x06A4 859 #define SK_TXQA1_CURCNT_LO 0x06A8 860 #define SK_TXQA1_CURCNT_HI 0x06AC 861 #define SK_TXQA1_CURBYTES 0x06B0 862 #define SK_TXQA1_BMU_CSR 0x06B4 863 #define SK_TXQA1_WATERMARK 0x06B8 864 #define SK_TXQA1_FLAG 0x06BA 865 #define SK_TXQA1_TEST1 0x06BC 866 #define SK_TXQA1_TEST2 0x06C0 867 #define SK_TXQA1_TEST3 0x06C4 868 /* yukon-2 only */ 869 #define SK_TXQA1_Y2_WM 0x06C0 870 #define SK_TXQA1_Y2_AL 0x06C2 871 #define SK_TXQA1_Y2_RSP 0x06C4 872 #define SK_TXQA1_Y2_RSL 0x06C6 873 #define SK_TXQA1_Y2_RP 0x06C8 874 #define SK_TXQA1_Y2_RL 0x06CA 875 #define SK_TXQA1_Y2_WP 0x06CC 876 #define SK_TXQA1_Y2_WSP 0x06CD 877 #define SK_TXQA1_Y2_WL 0x06CE 878 #define SK_TXQA1_Y2_WSL 0x06CF 879 /* yukon-2 only (prefetch unit) */ 880 #define SK_TXQA1_Y2_PREF_CSR 0x06D0 881 #define SK_TXQA1_Y2_PREF_LIDX 0x06D4 882 #define SK_TXQA1_Y2_PREF_ADDRLO 0x06D8 883 #define SK_TXQA1_Y2_PREF_ADDRHI 0x06DC 884 #define SK_TXQA1_Y2_PREF_GETIDX 0x06E0 885 #define SK_TXQA1_Y2_PREF_PUTIDX 0x06E4 886 #define SK_TXQA1_Y2_PREF_FIFOWP 0x06F0 887 #define SK_TXQA1_Y2_PREF_FIFORP 0x06F4 888 #define SK_TXQA1_Y2_PREF_FIFOWM 0x06F8 889 #define SK_TXQA1_Y2_PREF_FIFOLV 0x06FC 890 891 /* Block 14 -- TX sync queue 2 */ 892 #define SK_TXQS2_BUFCNT 0x0700 893 #define SK_TXQS2_BUFCTL 0x0702 894 #define SK_TXQS2_NEXTDESC 0x0704 895 #define SK_TXQS2_RXBUF_LO 0x0708 896 #define SK_TXQS2_RXBUF_HI 0x070C 897 #define SK_TXQS2_RXSTAT 0x0710 898 #define SK_TXQS2_CSUM_STARTVAL 0x0714 899 #define SK_TXQS2_CSUM_STARTPOS 0x0718 900 #define SK_TXQS2_CSUM_WRITEPOS 0x071A 901 #define SK_TXQS2_CURADDR_LO 0x0720 902 #define SK_TXQS2_CURADDR_HI 0x0724 903 #define SK_TXQS2_CURCNT_LO 0x0728 904 #define SK_TXQS2_CURCNT_HI 0x072C 905 #define SK_TXQS2_CURBYTES 0x0730 906 #define SK_TXQS2_BMU_CSR 0x0734 907 #define SK_TXQS2_WATERMARK 0x0738 908 #define SK_TXQS2_FLAG 0x073A 909 #define SK_TXQS2_TEST1 0x073C 910 #define SK_TXQS2_TEST2 0x0740 911 #define SK_TXQS2_TEST3 0x0744 912 /* yukon-2 only */ 913 #define SK_TXQS2_Y2_WM 0x0740 914 #define SK_TXQS2_Y2_AL 0x0742 915 #define SK_TXQS2_Y2_RSP 0x0744 916 #define SK_TXQS2_Y2_RSL 0x0746 917 #define SK_TXQS2_Y2_RP 0x0748 918 #define SK_TXQS2_Y2_RL 0x074A 919 #define SK_TXQS2_Y2_WP 0x074C 920 #define SK_TXQS2_Y2_WSP 0x074D 921 #define SK_TXQS2_Y2_WL 0x074E 922 #define SK_TXQS2_Y2_WSL 0x074F 923 /* yukon-2 only (prefetch unit) */ 924 #define SK_TXQS2_Y2_PREF_CSR 0x0750 925 #define SK_TXQS2_Y2_PREF_LIDX 0x0754 926 #define SK_TXQS2_Y2_PREF_ADDRLO 0x0758 927 #define SK_TXQS2_Y2_PREF_ADDRHI 0x075C 928 #define SK_TXQS2_Y2_PREF_GETIDX 0x0760 929 #define SK_TXQS2_Y2_PREF_PUTIDX 0x0764 930 #define SK_TXQS2_Y2_PREF_FIFOWP 0x0770 931 #define SK_TXQS2_Y2_PREF_FIFORP 0x0774 932 #define SK_TXQS2_Y2_PREF_FIFOWM 0x0778 933 #define SK_TXQS2_Y2_PREF_FIFOLV 0x077C 934 935 /* Block 15 -- TX async queue 2 */ 936 #define SK_TXQA2_BUFCNT 0x0780 937 #define SK_TXQA2_BUFCTL 0x0782 938 #define SK_TXQA2_NEXTDESC 0x0784 939 #define SK_TXQA2_RXBUF_LO 0x0788 940 #define SK_TXQA2_RXBUF_HI 0x078C 941 #define SK_TXQA2_RXSTAT 0x0790 942 #define SK_TXQA2_CSUM_STARTVAL 0x0794 943 #define SK_TXQA2_CSUM_STARTPOS 0x0798 944 #define SK_TXQA2_CSUM_WRITEPOS 0x079A 945 #define SK_TXQA2_CURADDR_LO 0x07A0 946 #define SK_TXQA2_CURADDR_HI 0x07A4 947 #define SK_TXQA2_CURCNT_LO 0x07A8 948 #define SK_TXQA2_CURCNT_HI 0x07AC 949 #define SK_TXQA2_CURBYTES 0x07B0 950 #define SK_TXQA2_BMU_CSR 0x07B4 951 #define SK_TXQA2_WATERMARK 0x07B8 952 #define SK_TXQA2_FLAG 0x07BA 953 #define SK_TXQA2_TEST1 0x07BC 954 #define SK_TXQA2_TEST2 0x07C0 955 #define SK_TXQA2_TEST3 0x07C4 956 /* yukon-2 only */ 957 #define SK_TXQA2_Y2_WM 0x07C0 958 #define SK_TXQA2_Y2_AL 0x07C2 959 #define SK_TXQA2_Y2_RSP 0x07C4 960 #define SK_TXQA2_Y2_RSL 0x07C6 961 #define SK_TXQA2_Y2_RP 0x07C8 962 #define SK_TXQA2_Y2_RL 0x07CA 963 #define SK_TXQA2_Y2_WP 0x07CC 964 #define SK_TXQA2_Y2_WSP 0x07CD 965 #define SK_TXQA2_Y2_WL 0x07CE 966 #define SK_TXQA2_Y2_WSL 0x07CF 967 /* yukon-2 only (prefetch unit) */ 968 #define SK_TXQA2_Y2_PREF_CSR 0x07D0 969 #define SK_TXQA2_Y2_PREF_LIDX 0x07D4 970 #define SK_TXQA2_Y2_PREF_ADDRLO 0x07D8 971 #define SK_TXQA2_Y2_PREF_ADDRHI 0x07DC 972 #define SK_TXQA2_Y2_PREF_GETIDX 0x07E0 973 #define SK_TXQA2_Y2_PREF_PUTIDX 0x07E4 974 #define SK_TXQA2_Y2_PREF_FIFOWP 0x07F0 975 #define SK_TXQA2_Y2_PREF_FIFORP 0x07F4 976 #define SK_TXQA2_Y2_PREF_FIFOWM 0x07F8 977 #define SK_TXQA2_Y2_PREF_FIFOLV 0x07FC 978 979 #define SK_TXBMU_CLR_IRQ_ERR 0x00000001 980 #define SK_TXBMU_CLR_IRQ_EOF 0x00000002 981 #define SK_TXBMU_CLR_IRQ_EOB 0x00000004 982 #define SK_TXBMU_TX_START 0x00000010 983 #define SK_TXBMU_TX_STOP 0x00000020 984 #define SK_TXBMU_POLL_OFF 0x00000040 985 #define SK_TXBMU_POLL_ON 0x00000080 986 #define SK_TXBMU_TRANSFER_SM_RESET 0x00000100 987 #define SK_TXBMU_TRANSFER_SM_UNRESET 0x00000200 988 #define SK_TXBMU_DESCWR_SM_RESET 0x00000400 989 #define SK_TXBMU_DESCWR_SM_UNRESET 0x00000800 990 #define SK_TXBMU_DESCRD_SM_RESET 0x00001000 991 #define SK_TXBMU_DESCRD_SM_UNRESET 0x00002000 992 #define SK_TXBMU_SUPERVISOR_SM_RESET 0x00004000 993 #define SK_TXBMU_SUPERVISOR_SM_UNRESET 0x00008000 994 #define SK_TXBMU_PFI_SM_RESET 0x00010000 995 #define SK_TXBMU_PFI_SM_UNRESET 0x00020000 996 #define SK_TXBMU_FIFO_RESET 0x00040000 997 #define SK_TXBMU_FIFO_UNRESET 0x00080000 998 #define SK_TXBMU_DESC_RESET 0x00100000 999 #define SK_TXBMU_DESC_UNRESET 0x00200000 1000 #define SK_TXBMU_SUPERVISOR_IDLE 0x01000000 1001 1002 #define SK_TXBMU_ONLINE \ 1003 (SK_TXBMU_TRANSFER_SM_UNRESET|SK_TXBMU_DESCWR_SM_UNRESET| \ 1004 SK_TXBMU_DESCRD_SM_UNRESET|SK_TXBMU_SUPERVISOR_SM_UNRESET| \ 1005 SK_TXBMU_PFI_SM_UNRESET|SK_TXBMU_FIFO_UNRESET| \ 1006 SK_TXBMU_DESC_UNRESET|SK_TXBMU_POLL_ON) 1007 1008 #define SK_TXBMU_OFFLINE \ 1009 (SK_TXBMU_TRANSFER_SM_RESET|SK_TXBMU_DESCWR_SM_RESET| \ 1010 SK_TXBMU_DESCRD_SM_RESET|SK_TXBMU_SUPERVISOR_SM_RESET| \ 1011 SK_TXBMU_PFI_SM_RESET|SK_TXBMU_FIFO_RESET| \ 1012 SK_TXBMU_DESC_RESET|SK_TXBMU_POLL_OFF) 1013 1014 /* Block 16 -- Receive RAMbuffer 1 */ 1015 #define SK_RXRB1_START 0x0800 1016 #define SK_RXRB1_END 0x0804 1017 #define SK_RXRB1_WR_PTR 0x0808 1018 #define SK_RXRB1_RD_PTR 0x080C 1019 #define SK_RXRB1_UTHR_PAUSE 0x0810 1020 #define SK_RXRB1_LTHR_PAUSE 0x0814 1021 #define SK_RXRB1_UTHR_HIPRIO 0x0818 1022 #define SK_RXRB1_UTHR_LOPRIO 0x081C 1023 #define SK_RXRB1_PKTCNT 0x0820 1024 #define SK_RXRB1_LVL 0x0824 1025 #define SK_RXRB1_CTLTST 0x0828 1026 1027 /* Block 17 -- Receive RAMbuffer 2 */ 1028 #define SK_RXRB2_START 0x0880 1029 #define SK_RXRB2_END 0x0884 1030 #define SK_RXRB2_WR_PTR 0x0888 1031 #define SK_RXRB2_RD_PTR 0x088C 1032 #define SK_RXRB2_UTHR_PAUSE 0x0890 1033 #define SK_RXRB2_LTHR_PAUSE 0x0894 1034 #define SK_RXRB2_UTHR_HIPRIO 0x0898 1035 #define SK_RXRB2_UTHR_LOPRIO 0x089C 1036 #define SK_RXRB2_PKTCNT 0x08A0 1037 #define SK_RXRB2_LVL 0x08A4 1038 #define SK_RXRB2_CTLTST 0x08A8 1039 1040 /* Block 20 -- Sync. Transmit RAMbuffer 1 */ 1041 #define SK_TXRBS1_START 0x0A00 1042 #define SK_TXRBS1_END 0x0A04 1043 #define SK_TXRBS1_WR_PTR 0x0A08 1044 #define SK_TXRBS1_RD_PTR 0x0A0C 1045 #define SK_TXRBS1_PKTCNT 0x0A20 1046 #define SK_TXRBS1_LVL 0x0A24 1047 #define SK_TXRBS1_CTLTST 0x0A28 1048 1049 /* Block 21 -- Async. Transmit RAMbuffer 1 */ 1050 #define SK_TXRBA1_START 0x0A80 1051 #define SK_TXRBA1_END 0x0A84 1052 #define SK_TXRBA1_WR_PTR 0x0A88 1053 #define SK_TXRBA1_RD_PTR 0x0A8C 1054 #define SK_TXRBA1_PKTCNT 0x0AA0 1055 #define SK_TXRBA1_LVL 0x0AA4 1056 #define SK_TXRBA1_CTLTST 0x0AA8 1057 1058 /* Block 22 -- Sync. Transmit RAMbuffer 2 */ 1059 #define SK_TXRBS2_START 0x0B00 1060 #define SK_TXRBS2_END 0x0B04 1061 #define SK_TXRBS2_WR_PTR 0x0B08 1062 #define SK_TXRBS2_RD_PTR 0x0B0C 1063 #define SK_TXRBS2_PKTCNT 0x0B20 1064 #define SK_TXRBS2_LVL 0x0B24 1065 #define SK_TXRBS2_CTLTST 0x0B28 1066 1067 /* Block 23 -- Async. Transmit RAMbuffer 2 */ 1068 #define SK_TXRBA2_START 0x0B80 1069 #define SK_TXRBA2_END 0x0B84 1070 #define SK_TXRBA2_WR_PTR 0x0B88 1071 #define SK_TXRBA2_RD_PTR 0x0B8C 1072 #define SK_TXRBA2_PKTCNT 0x0BA0 1073 #define SK_TXRBA2_LVL 0x0BA4 1074 #define SK_TXRBA2_CTLTST 0x0BA8 1075 1076 #define SK_RBCTL_RESET 0x01 1077 #define SK_RBCTL_UNRESET 0x02 1078 #define SK_RBCTL_OFF 0x04 1079 #define SK_RBCTL_ON 0x08 1080 #define SK_RBCTL_STORENFWD_OFF 0x10 1081 #define SK_RBCTL_STORENFWD_ON 0x20 1082 1083 /* Block 24 -- RX MAC FIFO 1 registers and LINK_SYNC counter */ 1084 #define SK_RXF1_END 0x0C00 1085 #define SK_RXF1_WPTR 0x0C04 1086 #define SK_RXF1_RPTR 0x0C0C 1087 #define SK_RXF1_PKTCNT 0x0C10 1088 #define SK_RXF1_LVL 0x0C14 1089 #define SK_RXF1_MACCTL 0x0C18 1090 #define SK_RXF1_CTL 0x0C1C 1091 #define SK_RXLED1_CNTINIT 0x0C20 1092 #define SK_RXLED1_COUNTER 0x0C24 1093 #define SK_RXLED1_CTL 0x0C28 1094 #define SK_RXLED1_TST 0x0C29 1095 #define SK_LINK_SYNC1_CINIT 0x0C30 1096 #define SK_LINK_SYNC1_COUNTER 0x0C34 1097 #define SK_LINK_SYNC1_CTL 0x0C38 1098 #define SK_LINK_SYNC1_TST 0x0C39 1099 #define SK_LINKLED1_CTL 0x0C3C 1100 1101 #define SK_FIFO_END 0x3F 1102 1103 /* Receive MAC FIFO 1 (Yukon Only) */ 1104 #define SK_RXMF1_END 0x0C40 1105 #define SK_RXMF1_THRESHOLD 0x0C44 1106 #define SK_RXMF1_CTRL_TEST 0x0C48 1107 #define SK_RXMF1_FLUSH_MASK 0x0C4C 1108 #define SK_RXMF1_FLUSH_THRESHOLD 0x0C50 1109 #define SK_RXMF1_WRITE_PTR 0x0C60 1110 #define SK_RXMF1_WRITE_LEVEL 0x0C68 1111 #define SK_RXMF1_READ_PTR 0x0C70 1112 #define SK_RXMF1_READ_LEVEL 0x0C78 1113 1114 /* Receive MAC FIFO 1 Control/Test */ 1115 #define SK_RFCTL_RX_MACSEC_FLUSH_ON 0x00800000 1116 #define SK_RFCTL_RX_MACSEC_FLUSH_OFF 0x00400000 1117 #define SK_RFCTL_RX_OVER_ON 0x00080000 /* Flush on RX Overrun on */ 1118 #define SK_RFCTL_RX_OVER_OFF 0x00040000 /* Flush on RX Overrun off */ 1119 #define SK_RFCTL_WR_PTR_TST_ON 0x00004000 /* Write pointer test on */ 1120 #define SK_RFCTL_WR_PTR_TST_OFF 0x00002000 /* Write pointer test off */ 1121 #define SK_RFCTL_WR_PTR_STEP 0x00001000 /* Write pointer increment */ 1122 #define SK_RFCTL_RD_PTR_TST_ON 0x00000400 /* Read pointer test on */ 1123 #define SK_RFCTL_RD_PTR_TST_OFF 0x00000200 /* Read pointer test off */ 1124 #define SK_RFCTL_RD_PTR_STEP 0x00000100 /* Read pointer increment */ 1125 #define SK_RFCTL_FIFO_FLUSH_ON 0x00000080 /* RX FIFO Flush mode on */ 1126 #define SK_RFCTL_FIFO_FLUSH_OFF 0x00000040 /* RX FIFO Flsuh mode off */ 1127 #define SK_RFCTL_RX_FIFO_OVER 0x00000020 /* Clear IRQ RX FIFO Overrun */ 1128 #define SK_RFCTL_FRAME_RX_DONE 0x00000010 /* Clear IRQ Frame RX Done */ 1129 #define SK_RFCTL_OPERATION_ON 0x00000008 /* Operational mode on */ 1130 #define SK_RFCTL_OPERATION_OFF 0x00000004 /* Operational mode off */ 1131 #define SK_RFCTL_RESET_CLEAR 0x00000002 /* MAC FIFO Reset Clear */ 1132 #define SK_RFCTL_RESET_SET 0x00000001 /* MAC FIFO Reset Set */ 1133 1134 #define SK_RFCTL_FIFO_THRESHOLD 0x0a /* flush threshold (default) */ 1135 1136 /* Block 25 -- RX MAC FIFO 2 registers and LINK_SYNC counter */ 1137 #define SK_RXF2_END 0x0C80 1138 #define SK_RXF2_WPTR 0x0C84 1139 #define SK_RXF2_RPTR 0x0C8C 1140 #define SK_RXF2_PKTCNT 0x0C90 1141 #define SK_RXF2_LVL 0x0C94 1142 #define SK_RXF2_MACCTL 0x0C98 1143 #define SK_RXF2_CTL 0x0C9C 1144 #define SK_RXLED2_CNTINIT 0x0CA0 1145 #define SK_RXLED2_COUNTER 0x0CA4 1146 #define SK_RXLED2_CTL 0x0CA8 1147 #define SK_RXLED2_TST 0x0CA9 1148 #define SK_LINK_SYNC2_CINIT 0x0CB0 1149 #define SK_LINK_SYNC2_COUNTER 0x0CB4 1150 #define SK_LINK_SYNC2_CTL 0x0CB8 1151 #define SK_LINK_SYNC2_TST 0x0CB9 1152 #define SK_LINKLED2_CTL 0x0CBC 1153 1154 #define SK_RXMACCTL_CLR_IRQ_NOSTS 0x00000001 1155 #define SK_RXMACCTL_CLR_IRQ_NOTSTAMP 0x00000002 1156 #define SK_RXMACCTL_TSTAMP_OFF 0x00000004 1157 #define SK_RXMACCTL_RSTAMP_ON 0x00000008 1158 #define SK_RXMACCTL_FLUSH_OFF 0x00000010 1159 #define SK_RXMACCTL_FLUSH_ON 0x00000020 1160 #define SK_RXMACCTL_PAUSE_OFF 0x00000040 1161 #define SK_RXMACCTL_PAUSE_ON 0x00000080 1162 #define SK_RXMACCTL_AFULL_OFF 0x00000100 1163 #define SK_RXMACCTL_AFULL_ON 0x00000200 1164 #define SK_RXMACCTL_VALIDTIME_PATCH_OFF 0x00000400 1165 #define SK_RXMACCTL_VALIDTIME_PATCH_ON 0x00000800 1166 #define SK_RXMACCTL_RXRDY_PATCH_OFF 0x00001000 1167 #define SK_RXMACCTL_RXRDY_PATCH_ON 0x00002000 1168 #define SK_RXMACCTL_STS_TIMEO 0x00FF0000 1169 #define SK_RXMACCTL_TSTAMP_TIMEO 0xFF000000 1170 1171 #define SK_RXLEDCTL_ENABLE 0x0001 1172 #define SK_RXLEDCTL_COUNTER_STOP 0x0002 1173 #define SK_RXLEDCTL_COUNTER_START 0x0004 1174 1175 #define SK_LINKLED_OFF 0x0001 1176 #define SK_LINKLED_ON 0x0002 1177 #define SK_LINKLED_LINKSYNC_OFF 0x0004 1178 #define SK_LINKLED_LINKSYNC_ON 0x0008 1179 #define SK_LINKLED_BLINK_OFF 0x0010 1180 #define SK_LINKLED_BLINK_ON 0x0020 1181 1182 /* Block 26 -- TX MAC FIFO 1 registers */ 1183 #define SK_TXF1_END 0x0D00 1184 #define SK_TXF1_WPTR 0x0D04 1185 #define SK_TXF1_RPTR 0x0D0C 1186 #define SK_TXF1_PKTCNT 0x0D10 1187 #define SK_TXF1_LVL 0x0D14 1188 #define SK_TXF1_MACCTL 0x0D18 1189 #define SK_TXF1_CTL 0x0D1C 1190 #define SK_TXLED1_CNTINIT 0x0D20 1191 #define SK_TXLED1_COUNTER 0x0D24 1192 #define SK_TXLED1_CTL 0x0D28 1193 #define SK_TXLED1_TST 0x0D29 1194 1195 /* Transmit MAC FIFO 1 (Yukon Only) */ 1196 #define SK_TXMF1_END 0x0D40 1197 #define SK_TXMF1_THRESHOLD 0x0D44 1198 #define SK_TXMF1_CTRL_TEST 0x0D48 1199 #define SK_TXMF1_WRITE_PTR 0x0D60 1200 #define SK_TXMF1_WRITE_SHADOW 0x0D64 1201 #define SK_TXMF1_WRITE_LEVEL 0x0D68 1202 #define SK_TXMF1_READ_PTR 0x0D70 1203 #define SK_TXMF1_RESTART_PTR 0x0D74 1204 #define SK_TXMF1_READ_LEVEL 0x0D78 1205 1206 /* Transmit MAC FIFO End Address */ 1207 #define SK_TXEND_WM_ON 0x00000003 /* ??? */ 1208 1209 /* Transmit MAC FIFO Control/Test */ 1210 #define SK_Y2_TFCTL_VLAN_TAG_ON 0x02000000 1211 #define SK_Y2_TFCTL_VLAN_TAG_OFF 0x1000000 1212 #define SK_TFCTL_WR_PTR_TST_ON 0x00004000 /* Write pointer test on*/ 1213 #define SK_TFCTL_WR_PTR_TST_OFF 0x00002000 /* Write pointer test off */ 1214 #define SK_TFCTL_WR_PTR_STEP 0x00001000 /* Write pointer increment */ 1215 #define SK_TFCTL_RD_PTR_TST_ON 0x00000400 /* Read pointer test on */ 1216 #define SK_TFCTL_RD_PTR_TST_OFF 0x00000200 /* Read pointer test off */ 1217 #define SK_TFCTL_RD_PTR_STEP 0x00000100 /* Read pointer increment */ 1218 #define SK_TFCTL_TX_FIFO_UNDER 0x00000040 /* Clear IRQ TX FIFO Under */ 1219 #define SK_TFCTL_FRAME_TX_DONE 0x00000020 /* Clear IRQ Frame TX Done */ 1220 #define SK_TFCTL_IRQ_PARITY_ER 0x00000010 /* Clear IRQ Parity Error */ 1221 #define SK_TFCTL_OPERATION_ON 0x00000008 /* Operational mode on */ 1222 #define SK_TFCTL_OPERATION_OFF 0x00000004 /* Operational mode off */ 1223 #define SK_TFCTL_RESET_CLEAR 0x00000002 /* MAC FIFO Reset Clear */ 1224 #define SK_TFCTL_RESET_SET 0x00000001 /* MAC FIFO Reset Set */ 1225 1226 /* Block 27 -- TX MAC FIFO 2 registers */ 1227 #define SK_TXF2_END 0x0D80 1228 #define SK_TXF2_WPTR 0x0D84 1229 #define SK_TXF2_RPTR 0x0D8C 1230 #define SK_TXF2_PKTCNT 0x0D90 1231 #define SK_TXF2_LVL 0x0D94 1232 #define SK_TXF2_MACCTL 0x0D98 1233 #define SK_TXF2_CTL 0x0D9C 1234 #define SK_TXLED2_CNTINIT 0x0DA0 1235 #define SK_TXLED2_COUNTER 0x0DA4 1236 #define SK_TXLED2_CTL 0x0DA8 1237 #define SK_TXLED2_TST 0x0DA9 1238 1239 #define SK_TXMACCTL_XMAC_RESET 0x00000001 1240 #define SK_TXMACCTL_XMAC_UNRESET 0x00000002 1241 #define SK_TXMACCTL_LOOP_OFF 0x00000004 1242 #define SK_TXMACCTL_LOOP_ON 0x00000008 1243 #define SK_TXMACCTL_FLUSH_OFF 0x00000010 1244 #define SK_TXMACCTL_FLUSH_ON 0x00000020 1245 #define SK_TXMACCTL_WAITEMPTY_OFF 0x00000040 1246 #define SK_TXMACCTL_WAITEMPTY_ON 0x00000080 1247 #define SK_TXMACCTL_AFULL_OFF 0x00000100 1248 #define SK_TXMACCTL_AFULL_ON 0x00000200 1249 #define SK_TXMACCTL_TXRDY_PATCH_OFF 0x00000400 1250 #define SK_TXMACCTL_RXRDY_PATCH_ON 0x00000800 1251 #define SK_TXMACCTL_PKT_RECOVERY_OFF 0x00001000 1252 #define SK_TXMACCTL_PKT_RECOVERY_ON 0x00002000 1253 #define SK_TXMACCTL_CLR_IRQ_PERR 0x00008000 1254 #define SK_TXMACCTL_WAITAFTERFLUSH 0x00010000 1255 1256 #define SK_TXLEDCTL_ENABLE 0x0001 1257 #define SK_TXLEDCTL_COUNTER_STOP 0x0002 1258 #define SK_TXLEDCTL_COUNTER_START 0x0004 1259 1260 #define SK_FIFO_RESET 0x00000001 1261 #define SK_FIFO_UNRESET 0x00000002 1262 #define SK_FIFO_OFF 0x00000004 1263 #define SK_FIFO_ON 0x00000008 1264 1265 /* Block 28 -- Descriptor Poll Timer */ 1266 #define SK_DPT_INIT 0x0e00 /* Initial value 24 bits */ 1267 #define SK_DPT_TIMER 0x0e04 /* Mul of 78.12MHz clk (24b) */ 1268 1269 #define SK_DPT_TIMER_MAX 0x00ffffffff /* 214.75ms at 78.125MHz */ 1270 1271 #define SK_DPT_TIMER_CTRL 0x0e08 /* Timer Control 8 bits */ 1272 #define SK_DPT_TCTL_STOP 0x01 /* Stop Timer */ 1273 #define SK_DPT_TCTL_START 0x02 /* Start Timer */ 1274 1275 #define SK_DPT_TIMER_TEST 0x0e0a /* Timer Test 16 bits */ 1276 #define SK_DPT_TTEST_STEP 0x0001 /* Timer Decrement */ 1277 #define SK_DPT_TTEST_OFF 0x0002 /* Test Mode Off */ 1278 #define SK_DPT_TTEST_ON 0x0004 /* Test Mode On */ 1279 1280 #define SK_TSTAMP_COUNT 0x0e14 1281 #define SK_TSTAMP_CTL 0x0e18 1282 1283 #define SK_TSTAMP_IRQ_CLEAR 0x01 1284 #define SK_TSTAMP_STOP 0x02 1285 #define SK_TSTAMP_START 0x04 1286 1287 #define SK_Y2_CPU_WDOG 0x0e48 1288 1289 #define SK_Y2_ASF_CSR 0x0e68 1290 #define SK_Y2_ASF_RESET 0x08 1291 1292 #define SK_Y2_ASF_HCU_CCSR 0x0e68 1293 #define SK_Y2_ASF_HCU_CSSR_ARB_RST __BIT(9) 1294 #define SK_Y2_ASF_HCU_CSSR_CPU_RST_MODE __BIT(8) 1295 #define SK_Y2_ASF_HCU_CSSR_CPU_CLK_DIVIDE_MSK __BITS(4, 3) 1296 #define SK_Y2_ASF_HCU_CSSR_UC_STATE_MSK __BITS(1, 0) 1297 1298 #define SK_Y2_LEV_ITIMERINIT 0x0eb0 1299 #define SK_Y2_LEV_ITIMERCTL 0x0eb8 1300 #define SK_Y2_TX_ITIMERINIT 0x0ec0 1301 #define SK_Y2_TX_ITIMERCTL 0x0ec8 1302 #define SK_Y2_ISR_ITIMERINIT 0x0ed0 1303 #define SK_Y2_ISR_ITIMERCTL 0x0ed8 1304 1305 /* Block 29 -- Status BMU (Yukon-2 only) */ 1306 #define SK_STAT_BMU_CSR 0x0e80 1307 #define SK_STAT_BMU_LIDX 0x0e84 1308 #define SK_STAT_BMU_ADDRLO 0x0e88 1309 #define SK_STAT_BMU_ADDRHI 0x0e8c 1310 #define SK_STAT_BMU_TXA1_RIDX 0x0e90 1311 #define SK_STAT_BMU_TXS1_RIDX 0x0e92 1312 #define SK_STAT_BMU_TXA2_RIDX 0x0e94 1313 #define SK_STAT_BMU_TXS2_RIDX 0x0e96 1314 #define SK_STAT_BMU_TX_THRESH 0x0e98 1315 #define SK_STAT_BMU_PUTIDX 0x0e9c 1316 #define SK_STAT_BMU_FIFOWP 0x0ea0 1317 #define SK_STAT_BMU_FIFORP 0x0ea4 1318 #define SK_STAT_BMU_FIFORSP 0x0ea6 1319 #define SK_STAT_BMU_FIFOLV 0x0ea8 1320 #define SK_STAT_BMU_FIFOSLV 0x0eaa 1321 #define SK_STAT_BMU_FIFOWM 0x0eac 1322 #define SK_STAT_BMU_FIFOIWM 0x0ead 1323 1324 #define SK_STAT_BMU_RESET 0x00000001 1325 #define SK_STAT_BMU_UNRESET 0x00000002 1326 #define SK_STAT_BMU_OFF 0x00000004 1327 #define SK_STAT_BMU_ON 0x00000008 1328 #define SK_STAT_BMU_IRQ_CLEAR 0x00000010 1329 1330 #define SK_STAT_BMU_TXTHIDX_MSK 0x0fff 1331 1332 /* Block 30 -- GMAC/GPHY Control Registers (Yukon Only)*/ 1333 #define SK_GMAC_CTRL 0x0f00 /* GMAC Control Register */ 1334 #define SK_GPHY_CTRL 0x0f04 /* GPHY Control Register */ 1335 #define SK_GMAC_ISR 0x0f08 /* GMAC Interrupt Source Register */ 1336 #define SK_GMAC_IMR 0x0f0c /* GMAC Interrupt Mask Register */ 1337 #define SK_LINK_CTRL 0x0f10 /* Link Control Register (LCR) */ 1338 #define SK_WOL_CTRL 0x0f20 /* Wake on LAN Control Register */ 1339 #define SK_MAC_ADDR_LOW 0x0f24 /* Mack Address Registers LOW */ 1340 #define SK_MAC_ADDR_HIGH 0x0f28 /* Mack Address Registers HIGH */ 1341 #define SK_PAT_READ_PTR 0x0f2c /* Pattern Read Pointer Register */ 1342 #define SK_PAT_LEN_REG0 0x0f30 /* Pattern Length Register 0 */ 1343 #define SK_PAT_LEN0 0x0f30 /* Pattern Length 0 */ 1344 #define SK_PAT_LEN1 0x0f31 /* Pattern Length 1 */ 1345 #define SK_PAT_LEN2 0x0f32 /* Pattern Length 2 */ 1346 #define SK_PAT_LEN3 0x0f33 /* Pattern Length 3 */ 1347 #define SK_PAT_LEN_REG1 0x0f34 /* Pattern Length Register 1 */ 1348 #define SK_PAT_LEN4 0x0f34 /* Pattern Length 4 */ 1349 #define SK_PAT_LEN5 0x0f35 /* Pattern Length 5 */ 1350 #define SK_PAT_LEN6 0x0f36 /* Pattern Length 6 */ 1351 #define SK_PAT_LEN7 0x0f37 /* Pattern Length 7 */ 1352 #define SK_PAT_CTR_REG0 0x0f38 /* Pattern Counter Register 0 */ 1353 #define SK_PAT_CTR0 0x0f38 /* Pattern Counter 0 */ 1354 #define SK_PAT_CTR1 0x0f39 /* Pattern Counter 1 */ 1355 #define SK_PAT_CTR2 0x0f3a /* Pattern Counter 2 */ 1356 #define SK_PAT_CTR3 0x0f3b /* Pattern Counter 3 */ 1357 #define SK_PAT_CTR_REG1 0x0f3c /* Pattern Counter Register 1 */ 1358 #define SK_PAT_CTR4 0x0f3c /* Pattern Counter 4 */ 1359 #define SK_PAT_CTR5 0x0f3d /* Pattern Counter 5 */ 1360 #define SK_PAT_CTR6 0x0f3e /* Pattern Counter 6 */ 1361 #define SK_PAT_CTR7 0x0f3f /* Pattern Counter 7 */ 1362 1363 #define SK_GMAC_BYP_MACSECRX 0x00002000 /* Bypass macsec for Rx */ 1364 #define SK_GMAC_BYP_MACSECTX 0x00000800 /* Bypass macsec for Tx */ 1365 #define SK_GMAC_BYP_RETR_FIFO 0x00000200 /* Bypass retransmit FIFO */ 1366 #define SK_GMAC_LOOP_ON 0x00000020 /* Loopback mode for testing */ 1367 #define SK_GMAC_LOOP_OFF 0x00000010 /* purposes */ 1368 #define SK_GMAC_PAUSE_ON 0x00000008 /* enable forward of pause */ 1369 #define SK_GMAC_PAUSE_OFF 0x00000004 /* signal to GMAC */ 1370 #define SK_GMAC_RESET_CLEAR 0x00000002 /* Clear GMAC Reset */ 1371 #define SK_GMAC_RESET_SET 0x00000001 /* Set GMAC Reset */ 1372 1373 #define SK_GPHY_SEL_BDT 0x10000000 /* Select Bidirectional xfer */ 1374 #define SK_GPHY_INT_POL_HI 0x08000000 /* IRQ Polarity Active */ 1375 #define SK_GPHY_75_OHM 0x04000000 /* Use 75 Ohm Termination */ 1376 #define SK_GPHY_DIS_FC 0x02000000 /* Disable Auto Fiber/Copper */ 1377 #define SK_GPHY_DIS_SLEEP 0x01000000 /* Disable Energy Detect */ 1378 #define SK_GPHY_HWCFG_M_3 0x00800000 /* HWCFG_MODE[3] */ 1379 #define SK_GPHY_HWCFG_M_2 0x00400000 /* HWCFG_MODE[2] */ 1380 #define SK_GPHY_HWCFG_M_1 0x00200000 /* HWCFG_MODE[1] */ 1381 #define SK_GPHY_HWCFG_M_0 0x00100000 /* HWCFG_MODE[0] */ 1382 #define SK_GPHY_ANEG_0 0x00080000 /* ANEG[0] */ 1383 #define SK_GPHY_ENA_XC 0x00040000 /* Enable MDI Crossover */ 1384 #define SK_GPHY_DIS_125 0x00020000 /* Disable 125MHz Clock */ 1385 #define SK_GPHY_ANEG_3 0x00010000 /* ANEG[3] */ 1386 #define SK_GPHY_ANEG_2 0x00008000 /* ANEG[2] */ 1387 #define SK_GPHY_ANEG_1 0x00004000 /* ANEG[1] */ 1388 #define SK_GPHY_ENA_PAUSE 0x00002000 /* Enable Pause */ 1389 #define SK_GPHY_PHYADDR_4 0x00001000 /* Bit 4 of Phy Addr */ 1390 #define SK_GPHY_PHYADDR_3 0x00000800 /* Bit 3 of Phy Addr */ 1391 #define SK_GPHY_PHYADDR_2 0x00000400 /* Bit 2 of Phy Addr */ 1392 #define SK_GPHY_PHYADDR_1 0x00000200 /* Bit 1 of Phy Addr */ 1393 #define SK_GPHY_PHYADDR_0 0x00000100 /* Bit 0 of Phy Addr */ 1394 #define SK_GPHY_RESET_CLEAR 0x00000002 /* Clear GPHY Reset */ 1395 #define SK_GPHY_RESET_SET 0x00000001 /* Set GPHY Reset */ 1396 1397 #define SK_GPHY_COPPER (SK_GPHY_HWCFG_M_0 | SK_GPHY_HWCFG_M_1 | \ 1398 SK_GPHY_HWCFG_M_2 | SK_GPHY_HWCFG_M_3 ) 1399 #define SK_GPHY_FIBER (SK_GPHY_HWCFG_M_0 | SK_GPHY_HWCFG_M_1 | \ 1400 SK_GPHY_HWCFG_M_2 ) 1401 #define SK_GPHY_ANEG_ALL (SK_GPHY_ANEG_0 | SK_GPHY_ANEG_1 | \ 1402 SK_GPHY_ANEG_2 | SK_GPHY_ANEG_3 ) 1403 1404 #define SK_GMAC_INT_TX_OFLOW 0x20 /* Transmit Counter Overflow */ 1405 #define SK_GMAC_INT_RX_OFLOW 0x10 /* Receiver Overflow */ 1406 #define SK_GMAC_INT_TX_UNDER 0x08 /* Transmit FIFO Underrun */ 1407 #define SK_GMAC_INT_TX_DONE 0x04 /* Transmit Complete */ 1408 #define SK_GMAC_INT_RX_OVER 0x02 /* Receive FIFO Overrun */ 1409 #define SK_GMAC_INT_RX_DONE 0x01 /* Receive Complete */ 1410 1411 #define SK_LINK_RESET_CLEAR 0x0002 /* Link Reset Clear */ 1412 #define SK_LINK_RESET_SET 0x0001 /* Link Reset Set */ 1413 1414 /* Block 31 -- reserved */ 1415 1416 /* Block 32-33 -- Pattern Ram */ 1417 #define SK_WOL_PRAM 0x1000 1418 1419 /* Block 0x22 - 0x37 -- reserved */ 1420 1421 /* Block 0x38 -- Y2 PCI config registers */ 1422 #define SK_Y2_PCI_BASE 0x1c00 1423 1424 /* Compute offset of mirrored PCI register */ 1425 #define SK_Y2_PCI_REG(reg) ((reg) + SK_Y2_PCI_BASE) 1426 1427 /* Block 0x39 - 0x3f -- reserved */ 1428 1429 /* Block 0x40 to 0x4F -- XMAC 1 registers */ 1430 #define SK_XMAC1_BASE 0x2000 1431 1432 /* Block 0x50 to 0x5F -- MARV 1 registers */ 1433 #define SK_MARV1_BASE 0x2800 1434 1435 /* Block 0x60 to 0x6F -- XMAC 2 registers */ 1436 #define SK_XMAC2_BASE 0x3000 1437 1438 /* Block 0x70 to 0x7F -- MARV 2 registers */ 1439 #define SK_MARV2_BASE 0x3800 1440 1441 /* Compute relative offset of an XMAC register in the XMAC window(s). */ 1442 #define SK_XMAC_REG(sc, reg) (((reg) * 2) + SK_XMAC1_BASE + \ 1443 (((sc)->sk_port) * (SK_XMAC2_BASE - SK_XMAC1_BASE))) 1444 1445 #if 0 1446 #define SK_XM_READ_4(sc, reg) \ 1447 ((sk_win_read_2(sc->sk_softc, \ 1448 SK_XMAC_REG(sc, reg)) & 0xFFFF) | \ 1449 ((sk_win_read_2(sc->sk_softc, \ 1450 SK_XMAC_REG(sc, reg + 2)) & 0xFFFF) << 16)) 1451 1452 #define SK_XM_WRITE_4(sc, reg, val) \ 1453 sk_win_write_2(sc->sk_softc, SK_XMAC_REG(sc, reg), \ 1454 ((val) & 0xFFFF)); \ 1455 sk_win_write_2(sc->sk_softc, SK_XMAC_REG(sc, reg + 2), \ 1456 ((val) >> 16) & 0xFFFF) 1457 #else 1458 #define SK_XM_READ_4(sc, reg) \ 1459 sk_win_read_4(sc->sk_softc, SK_XMAC_REG(sc, reg)) 1460 1461 #define SK_XM_WRITE_4(sc, reg, val) \ 1462 sk_win_write_4(sc->sk_softc, SK_XMAC_REG(sc, reg), (val)) 1463 #endif 1464 1465 #define SK_XM_READ_2(sc, reg) \ 1466 sk_win_read_2(sc->sk_softc, SK_XMAC_REG(sc, reg)) 1467 1468 #define SK_XM_WRITE_2(sc, reg, val) \ 1469 sk_win_write_2(sc->sk_softc, SK_XMAC_REG(sc, reg), val) 1470 1471 #define SK_XM_SETBIT_4(sc, reg, x) \ 1472 SK_XM_WRITE_4(sc, reg, (SK_XM_READ_4(sc, reg)) | (x)) 1473 1474 #define SK_XM_CLRBIT_4(sc, reg, x) \ 1475 SK_XM_WRITE_4(sc, reg, (SK_XM_READ_4(sc, reg)) & ~(x)) 1476 1477 #define SK_XM_SETBIT_2(sc, reg, x) \ 1478 SK_XM_WRITE_2(sc, reg, (SK_XM_READ_2(sc, reg)) | (x)) 1479 1480 #define SK_XM_CLRBIT_2(sc, reg, x) \ 1481 SK_XM_WRITE_2(sc, reg, (SK_XM_READ_2(sc, reg)) & ~(x)) 1482 1483 /* Compute relative offset of an MARV register in the MARV window(s). */ 1484 #define SK_YU_REG(sc, reg) \ 1485 ((reg) + SK_MARV1_BASE + \ 1486 (((sc)->sk_port) * (SK_MARV2_BASE - SK_MARV1_BASE))) 1487 1488 #define SK_YU_READ_4(sc, reg) \ 1489 sk_win_read_4((sc)->sk_softc, SK_YU_REG((sc), (reg))) 1490 1491 #define SK_YU_READ_2(sc, reg) \ 1492 sk_win_read_2((sc)->sk_softc, SK_YU_REG((sc), (reg))) 1493 1494 #define SK_YU_WRITE_4(sc, reg, val) \ 1495 sk_win_write_4((sc)->sk_softc, SK_YU_REG((sc), (reg)), (val)) 1496 1497 #define SK_YU_WRITE_2(sc, reg, val) \ 1498 sk_win_write_2((sc)->sk_softc, SK_YU_REG((sc), (reg)), (val)) 1499 1500 #define SK_YU_SETBIT_4(sc, reg, x) \ 1501 SK_YU_WRITE_4(sc, reg, (SK_YU_READ_4(sc, reg)) | (x)) 1502 1503 #define SK_YU_CLRBIT_4(sc, reg, x) \ 1504 SK_YU_WRITE_4(sc, reg, (SK_YU_READ_4(sc, reg)) & ~(x)) 1505 1506 #define SK_YU_SETBIT_2(sc, reg, x) \ 1507 SK_YU_WRITE_2(sc, reg, (SK_YU_READ_2(sc, reg)) | (x)) 1508 1509 #define SK_YU_CLRBIT_2(sc, reg, x) \ 1510 SK_YU_WRITE_2(sc, reg, (SK_YU_READ_2(sc, reg)) & ~(x)) 1511 1512 /* 1513 * The default FIFO threshold on the XMAC II is 4 bytes. On 1514 * dual port NICs, this often leads to transmit underruns, so we 1515 * bump the threshold a little. 1516 */ 1517 #define SK_XM_TX_FIFOTHRESH 512 1518 1519 #define SK_PCI_VENDOR_ID 0x0000 1520 #define SK_PCI_DEVICE_ID 0x0002 1521 #define SK_PCI_COMMAND 0x0004 1522 #define SK_PCI_STATUS 0x0006 1523 #define SK_PCI_REVID 0x0008 1524 #define SK_PCI_CLASSCODE 0x0009 1525 #define SK_PCI_CACHELEN 0x000C 1526 #define SK_PCI_LATENCY_TIMER 0x000D 1527 #define SK_PCI_HEADER_TYPE 0x000E 1528 #define SK_PCI_LOMEM 0x0010 1529 #define SK_PCI_LOIO 0x0014 1530 #define SK_PCI_SUBVEN_ID 0x002C 1531 #define SK_PCI_SYBSYS_ID 0x002E 1532 #define SK_PCI_BIOSROM 0x0030 1533 #define SK_PCI_INTLINE 0x003C 1534 #define SK_PCI_INTPIN 0x003D 1535 #define SK_PCI_MINGNT 0x003E 1536 #define SK_PCI_MINLAT 0x003F 1537 1538 /* device specific PCI registers */ 1539 #define SK_PCI_OURREG1 0x0040 1540 #define SK_PCI_OURREG2 0x0044 1541 #define SK_PCI_CAPID 0x0048 /* 8 bits */ 1542 #define SK_PCI_NEXTPTR 0x0049 /* 8 bits */ 1543 #define SK_PCI_PWRMGMTCAP 0x004A /* 16 bits */ 1544 #define SK_PCI_PWRMGMTCTRL 0x004C /* 16 bits */ 1545 #define SK_PCI_PME_EVENT 0x004F 1546 #define SK_PCI_VPD_CAPID 0x0050 1547 #define SK_PCI_VPD_NEXTPTR 0x0051 1548 #define SK_PCI_VPD_ADDR 0x0052 1549 #define SK_PCI_VPD_DATA 0x0054 1550 #define SK_PCI_OURREG3 0x0080 /* Yukon EC U */ 1551 #define SK_PCI_OURREG4 0x0084 1552 #define SK_PCI_OURREG5 0x0088 1553 1554 #define SK_Y2_REG1_PHY1_COMA 0x10000000 1555 #define SK_Y2_REG1_PHY2_COMA 0x20000000 1556 1557 /* SK_PCI_OURREG2 32bits */ 1558 #define SK_REG2_REV_DESC 0x00000004 /* revert byte order in descriptor */ 1559 1560 /* SK_PCI_OURREG4 32bits (Yukon-ECU only) */ 1561 #define SK_Y2_REG4_TIMER_VALUE_MSK (0xff << 16) 1562 #define SK_Y2_REG4_FORCE_ASPM_REQUEST __BIT(15) 1563 #define SK_Y2_REG4_ASPM_GPHY_LINK_DOWN __BIT(14) 1564 #define SK_Y2_REG4_ASPM_INT_FIFO_EMPTY __BIT(13) 1565 #define SK_Y2_REG4_ASPM_CLKRUN_REQUEST __BIT(12) 1566 #define SK_Y2_REG4_ASPM_FORCE_CLKREQ_ENA __BIT(4) 1567 #define SK_Y2_REG4_ASPM_CLKREQ_PAD __BIT(3) 1568 #define SK_Y2_REG4_ASPM_A1_MODE_SELECT __BIT(2) 1569 #define SK_Y2_REG4_CLK_GATE_PEX_UNIT_ENA __BIT(1) 1570 #define SK_Y2_REG4_CLK_GATE_ROOT_COR_ENA __BIT(0) 1571 1572 #define SK_PSTATE_MASK 0x0003 1573 #define SK_PSTATE_D0 0x0000 1574 #define SK_PSTATE_D1 0x0001 1575 #define SK_PSTATE_D2 0x0002 1576 #define SK_PSTATE_D3 0x0003 1577 #define SK_PME_EN 0x0010 1578 #define SK_PME_STATUS 0x8000 1579 1580 /* 1581 * VPD flag bit. Set to 0 to initiate a read, will become 1 when 1582 * read is complete. Set to 1 to initiate a write, will become 0 1583 * when write is finished. 1584 */ 1585 #define SK_VPD_FLAG 0x8000 1586 1587 /* VPD structures */ 1588 struct vpd_res { 1589 u_int8_t vr_id; 1590 u_int8_t vr_len; 1591 u_int8_t vr_pad; 1592 }; 1593 1594 struct vpd_key { 1595 char vk_key[2]; 1596 u_int8_t vk_len; 1597 }; 1598 1599 #define VPD_RES_ID 0x82 /* ID string */ 1600 #define VPD_RES_READ 0x90 /* start of read only area */ 1601 #define VPD_RES_WRITE 0x81 /* start of read/write area */ 1602 #define VPD_RES_END 0x78 /* end tag */ 1603 1604 #define CSR_WRITE_4(sc, reg, val) \ 1605 bus_space_write_4((sc)->sk_btag, (sc)->sk_bhandle, (reg), (val)) 1606 #define CSR_WRITE_2(sc, reg, val) \ 1607 bus_space_write_2((sc)->sk_btag, (sc)->sk_bhandle, (reg), (val)) 1608 #define CSR_WRITE_1(sc, reg, val) \ 1609 bus_space_write_1((sc)->sk_btag, (sc)->sk_bhandle, (reg), (val)) 1610 1611 #define CSR_READ_4(sc, reg) \ 1612 bus_space_read_4((sc)->sk_btag, (sc)->sk_bhandle, (reg)) 1613 #define CSR_READ_2(sc, reg) \ 1614 bus_space_read_2((sc)->sk_btag, (sc)->sk_bhandle, (reg)) 1615 #define CSR_READ_1(sc, reg) \ 1616 bus_space_read_1((sc)->sk_btag, (sc)->sk_bhandle, (reg)) 1617 1618 struct sk_type { 1619 u_int16_t sk_vid; 1620 u_int16_t sk_did; 1621 const char *sk_name; 1622 }; 1623 1624 #define SK_ADDR_LO(x) ((u_int64_t) (x) & 0xffffffff) 1625 #define SK_ADDR_HI(x) ((u_int64_t) (x) >> 32) 1626 1627 #define SK_RING_ALIGN 64 1628 1629 /* RX queue descriptor data structure */ 1630 struct sk_rx_desc { 1631 u_int32_t sk_ctl; 1632 u_int32_t sk_next; 1633 u_int32_t sk_data_lo; 1634 u_int32_t sk_data_hi; 1635 u_int32_t sk_xmac_rxstat; 1636 u_int32_t sk_timestamp; 1637 u_int16_t sk_csum2; 1638 u_int16_t sk_csum1; 1639 u_int16_t sk_csum2_start; 1640 u_int16_t sk_csum1_start; 1641 }; 1642 1643 #define SK_OPCODE_DEFAULT 0x00550000 1644 #define SK_OPCODE_CSUM 0x00560000 1645 1646 #define SK_RXCTL_LEN 0x0000FFFF 1647 #define SK_RXCTL_OPCODE 0x00FF0000 1648 #define SK_RXCTL_TSTAMP_VALID 0x01000000 1649 #define SK_RXCTL_STATUS_VALID 0x02000000 1650 #define SK_RXCTL_DEV0 0x04000000 1651 #define SK_RXCTL_EOF_INTR 0x08000000 1652 #define SK_RXCTL_EOB_INTR 0x10000000 1653 #define SK_RXCTL_LASTFRAG 0x20000000 1654 #define SK_RXCTL_FIRSTFRAG 0x40000000 1655 #define SK_RXCTL_OWN 0x80000000 1656 1657 #define SK_RXSTAT \ 1658 (SK_OPCODE_DEFAULT|SK_RXCTL_EOF_INTR|SK_RXCTL_LASTFRAG| \ 1659 SK_RXCTL_FIRSTFRAG|SK_RXCTL_OWN) 1660 1661 struct sk_tx_desc { 1662 u_int32_t sk_ctl; 1663 u_int32_t sk_next; 1664 u_int32_t sk_data_lo; 1665 u_int32_t sk_data_hi; 1666 u_int32_t sk_xmac_txstat; 1667 u_int16_t sk_rsvd0; 1668 u_int16_t sk_csum_startval; 1669 u_int16_t sk_csum_startpos; 1670 u_int16_t sk_csum_writepos; 1671 u_int32_t sk_rsvd1; 1672 }; 1673 1674 #define SK_TXCTL_LEN 0x0000FFFF 1675 #define SK_TXCTL_OPCODE 0x00FF0000 1676 #define SK_TXCTL_SW 0x01000000 1677 #define SK_TXCTL_NOCRC 0x02000000 1678 #define SK_TXCTL_STORENFWD 0x04000000 1679 #define SK_TXCTL_EOF_INTR 0x08000000 1680 #define SK_TXCTL_EOB_INTR 0x10000000 1681 #define SK_TXCTL_LASTFRAG 0x20000000 1682 #define SK_TXCTL_FIRSTFRAG 0x40000000 1683 #define SK_TXCTL_OWN 0x80000000 1684 1685 #define SK_TXSTAT \ 1686 (SK_OPCODE_DEFAULT|SK_TXCTL_EOF_INTR|SK_TXCTL_LASTFRAG|SK_TXCTL_OWN) 1687 1688 #define SK_RXBYTES(x) ((x) & 0x0000FFFF); 1689 #define SK_TXBYTES SK_RXBYTES 1690 1691 #define SK_TX_RING_CNT 512 1692 #define SK_RX_RING_CNT 256 1693 1694 #define SK_Y2_BMUOPC_ADDR64 0x21 1695 #define SK_Y2_BMUOPC_VLAN 0x22 1696 1697 struct msk_rx_desc { 1698 u_int32_t sk_addr; 1699 u_int16_t sk_len; 1700 u_int8_t sk_ctl; 1701 u_int8_t sk_opcode; 1702 } __packed __aligned(8); 1703 1704 #define SK_Y2_RXOPC_BUFFER 0x40 1705 #define SK_Y2_RXOPC_PACKET 0x41 1706 #define SK_Y2_RXOPC_OWN 0x80 1707 1708 struct msk_tx_desc { 1709 u_int32_t sk_addr; 1710 u_int16_t sk_len; 1711 u_int8_t sk_ctl; 1712 u_int8_t sk_opcode; 1713 } __packed __aligned(8); 1714 1715 #define SK_Y2_TXCTL_LASTFRAG 0x80 1716 #define SK_Y2_TXCTL_VLAN_TAG 0x20 1717 1718 #define SK_Y2_TXOPC_BUFFER 0x40 1719 #define SK_Y2_TXOPC_PACKET 0x41 1720 #define SK_Y2_TXOPC_OWN 0x80 1721 1722 struct msk_status_desc { 1723 u_int32_t sk_status; 1724 u_int16_t sk_len; 1725 u_int8_t sk_link; 1726 u_int8_t sk_opcode; 1727 } __packed __aligned(8); 1728 1729 #define SK_Y2_STOPC_RXSTAT 0x60 1730 #define SK_Y2_STOPC_TXSTAT 0x68 1731 #define SK_Y2_STOPC_OWN 0x80 1732 1733 #define SK_Y2_ST_TXA1_MSKL 0x00000fff 1734 #define SK_Y2_ST_TXA1_SHIFT 0 1735 1736 #define SK_Y2_ST_TXA2_MSKL 0xff000000 1737 #define SK_Y2_ST_TXA2_SHIFTL 24 1738 #define SK_Y2_ST_TXA2_MSKH 0x000f 1739 #define SK_Y2_ST_TXA2_SHIFTH 8 1740 1741 #define SK_Y2_ST_TXA1_DI(len, stat) \ 1742 (((stat) >> SK_Y2_ST_TXA1_SHIFT) & SK_Y2_ST_TXA1_MSKL) 1743 #define SK_Y2_ST_TXA2_DI(len, stat) \ 1744 ((((len) & SK_Y2_ST_TXA2_MSKH) << SK_Y2_ST_TXA2_SHIFTH) | \ 1745 (((stat) & SK_Y2_ST_TXA2_MSKL) >> SK_Y2_ST_TXA2_SHIFTL)) 1746 1747 #define MSK_TX_RING_CNT 512 1748 #define MSK_RX_RING_CNT 512 1749 #define MSK_STATUS_RING_CNT 2048 1750 1751 /* 1752 * Jumbo buffer stuff. Note that we must allocate more jumbo 1753 * buffers than there are descriptors in the receive ring. This 1754 * is because we don't know how long it will take for a packet 1755 * to be released after we hand it off to the upper protocol 1756 * layers. To be safe, we allocate 1.5 times the number of 1757 * receive descriptors. 1758 */ 1759 #define SK_JUMBO_FRAMELEN 9018 1760 #define SK_JUMBO_MTU (SK_JUMBO_FRAMELEN-ETHER_HDR_LEN-ETHER_CRC_LEN) 1761 #define SK_MIN_FRAMELEN (ETHER_MIN_LEN - ETHER_CRC_LEN) 1762 #define SK_JSLOTS 384 1763 1764 #define SK_JRAWLEN (SK_JUMBO_FRAMELEN + ETHER_ALIGN) 1765 #define SK_JLEN SK_JRAWLEN 1766 #define SK_MCLBYTES SK_JLEN 1767 #define SK_JPAGESZ PAGE_SIZE 1768 #define SK_RESID (SK_JPAGESZ - (SK_JLEN * SK_JSLOTS) % SK_JPAGESZ) 1769 #define SK_JMEM ((SK_JLEN * SK_JSLOTS) + SK_RESID) 1770 1771 #define MSK_JSLOTS ((MSK_RX_RING_CNT / 2) * 3) 1772 1773 #define MSK_RESID (SK_JPAGESZ - (SK_JLEN * MSK_JSLOTS) % SK_JPAGESZ) 1774 #define MSK_JMEM ((SK_JLEN * MSK_JSLOTS) + MSK_RESID) 1775 1776 #define SK_MAXUNIT 256 1777 #define SK_TIMEOUT 1000 1778 1779 /* YUKON registers */ 1780 1781 /* General Purpose Status Register (GPSR) */ 1782 #define YUKON_GPSR 0x0000 1783 1784 #define YU_GPSR_SPEED 0x8000 /* speed 0 - 10Mbps, 1 - 100Mbps */ 1785 #define YU_GPSR_DUPLEX 0x4000 /* 0 - half duplex, 1 - full duplex */ 1786 #define YU_GPSR_FCTL_TX 0x2000 /* Tx flow control, 1 - disabled */ 1787 #define YU_GPSR_LINK 0x1000 /* link status (down/up) */ 1788 #define YU_GPSR_PAUSE 0x0800 /* flow control enable/disable */ 1789 #define YU_GPSR_TX_IN_PROG 0x0400 /* transmit in progress */ 1790 #define YU_GPSR_EXCESS_COL 0x0200 /* excessive collisions occurred */ 1791 #define YU_GPSR_LATE_COL 0x0100 /* late collision occurred */ 1792 #define YU_GPSR_MII_PHY_STC 0x0020 /* MII PHY status change */ 1793 #define YU_GPSR_GIG_SPEED 0x0010 /* Gigabit Speed (0 - use speed bit) */ 1794 #define YU_GPSR_PARTITION 0x0008 /* partition mode */ 1795 #define YU_GPSR_FCTL_RX 0x0004 /* Rx flow control, 1 - disabled */ 1796 #define YU_GPSR_PROMS_EN 0x0002 /* promiscuous mode, 1 - enabled */ 1797 1798 /* General Purpose Control Register (GPCR) */ 1799 #define YUKON_GPCR 0x0004 1800 1801 #define YU_GPCR_FCTL_TX_DIS 0x2000 /* Disable Tx flow control 802.3x */ 1802 #define YU_GPCR_TXEN 0x1000 /* Transmit Enable */ 1803 #define YU_GPCR_RXEN 0x0800 /* Receive Enable */ 1804 #define YU_GPCR_BURSTEN 0x0400 /* Burst Mode Enable */ 1805 #define YU_GPCR_LPBK 0x0200 /* MAC Loopback Enable */ 1806 #define YU_GPCR_PAR 0x0100 /* Partition Enable */ 1807 #define YU_GPCR_GIG 0x0080 /* Gigabit Speed 1000Mbps */ 1808 #define YU_GPCR_FLP 0x0040 /* Force Link Pass */ 1809 #define YU_GPCR_DUPLEX 0x0020 /* Duplex Enable */ 1810 #define YU_GPCR_FCTL_RX_DIS 0x0010 /* Disable Rx flow control 802.3x */ 1811 #define YU_GPCR_SPEED 0x0008 /* Port Speed 100Mbps */ 1812 #define YU_GPCR_DPLX_DIS 0x0004 /* Disable Auto-Update for duplex */ 1813 #define YU_GPCR_FCTL_DIS 0x0002 /* Disable Auto-Update for 802.3x */ 1814 #define YU_GPCR_SPEED_DIS 0x0001 /* Disable Auto-Update for speed */ 1815 1816 /* Transmit Control Register (TCR) */ 1817 #define YUKON_TCR 0x0008 1818 1819 #define YU_TCR_FJ 0x8000 /* force jam / flow control */ 1820 #define YU_TCR_CRCD 0x4000 /* insert CRC (0 - enable) */ 1821 #define YU_TCR_PADD 0x2000 /* pad packets to 64b (0 - enable) */ 1822 #define YU_TCR_COLTH 0x1c00 /* collision threshold */ 1823 1824 /* Receive Control Register (RCR) */ 1825 #define YUKON_RCR 0x000c 1826 1827 #define YU_RCR_UFLEN 0x8000 /* unicast filter enable */ 1828 #define YU_RCR_MUFLEN 0x4000 /* multicast filter enable */ 1829 #define YU_RCR_CRCR 0x2000 /* remove CRC */ 1830 #define YU_RCR_PASSFC 0x1000 /* pass flow control packets */ 1831 1832 /* Transmit Flow Control Register (TFCR) */ 1833 #define YUKON_TFCR 0x0010 /* Pause Time */ 1834 1835 /* Transmit Parameter Register (TPR) */ 1836 #define YUKON_TPR 0x0014 1837 1838 #define YU_TPR_JAM_LEN(x) (((x) & 0x3) << 14) 1839 #define YU_TPR_JAM_IPG(x) (((x) & 0x1f) << 9) 1840 #define YU_TPR_JAM2DATA_IPG(x) (((x) & 0x1f) << 4) 1841 1842 /* Serial Mode Register (SMR) */ 1843 #define YUKON_SMR 0x0018 1844 1845 #define YU_SMR_DATA_BLIND(x) (((x) & 0x1f) << 11) 1846 #define YU_SMR_LIMIT4 0x0400 /* reset after 16 / 4 collisions */ 1847 #define YU_SMR_MFL_JUMBO 0x0100 /* max frame length for jumbo frames */ 1848 #define YU_SMR_MFL_VLAN 0x0200 /* max frame length + vlan tag */ 1849 #define YU_SMR_IPG_DATA(x) ((x) & 0x1f) 1850 1851 /* Source Address Low #1 (SAL1) */ 1852 #define YUKON_SAL1 0x001c /* SA1[15:0] */ 1853 1854 /* Source Address Middle #1 (SAM1) */ 1855 #define YUKON_SAM1 0x0020 /* SA1[31:16] */ 1856 1857 /* Source Address High #1 (SAH1) */ 1858 #define YUKON_SAH1 0x0024 /* SA1[47:32] */ 1859 1860 /* Source Address Low #2 (SAL2) */ 1861 #define YUKON_SAL2 0x0028 /* SA2[15:0] */ 1862 1863 /* Source Address Middle #2 (SAM2) */ 1864 #define YUKON_SAM2 0x002c /* SA2[31:16] */ 1865 1866 /* Source Address High #2 (SAH2) */ 1867 #define YUKON_SAH2 0x0030 /* SA2[47:32] */ 1868 1869 /* Multicast Address Hash Register 1 (MCAH1) */ 1870 #define YUKON_MCAH1 0x0034 1871 1872 /* Multicast Address Hash Register 2 (MCAH2) */ 1873 #define YUKON_MCAH2 0x0038 1874 1875 /* Multicast Address Hash Register 3 (MCAH3) */ 1876 #define YUKON_MCAH3 0x003c 1877 1878 /* Multicast Address Hash Register 4 (MCAH4) */ 1879 #define YUKON_MCAH4 0x0040 1880 1881 /* Transmit Interrupt Register (TIR) */ 1882 #define YUKON_TIR 0x0044 1883 1884 #define YU_TIR_OUT_UNICAST 0x0001 /* Num Unicast Packets Transmitted */ 1885 #define YU_TIR_OUT_BROADCAST 0x0002 /* Num Broadcast Packets Transmitted */ 1886 #define YU_TIR_OUT_PAUSE 0x0004 /* Num Pause Packets Transmitted */ 1887 #define YU_TIR_OUT_MULTICAST 0x0008 /* Num Multicast Packets Transmitted */ 1888 #define YU_TIR_OUT_OCTETS 0x0030 /* Num Bytes Transmitted */ 1889 #define YU_TIR_OUT_64_OCTETS 0x0000 /* Num Packets Transmitted */ 1890 #define YU_TIR_OUT_127_OCTETS 0x0000 /* Num Packets Transmitted */ 1891 #define YU_TIR_OUT_255_OCTETS 0x0000 /* Num Packets Transmitted */ 1892 #define YU_TIR_OUT_511_OCTETS 0x0000 /* Num Packets Transmitted */ 1893 #define YU_TIR_OUT_1023_OCTETS 0x0000 /* Num Packets Transmitted */ 1894 #define YU_TIR_OUT_1518_OCTETS 0x0000 /* Num Packets Transmitted */ 1895 #define YU_TIR_OUT_MAX_OCTETS 0x0000 /* Num Packets Transmitted */ 1896 #define YU_TIR_OUT_SPARE 0x0000 /* Num Packets Transmitted */ 1897 #define YU_TIR_OUT_COLLISIONS 0x0000 /* Num Packets Transmitted */ 1898 #define YU_TIR_OUT_LATE 0x0000 /* Num Packets Transmitted */ 1899 1900 /* Receive Interrupt Register (RIR) */ 1901 #define YUKON_RIR 0x0048 1902 1903 /* Transmit and Receive Interrupt Register (TRIR) */ 1904 #define YUKON_TRIR 0x004c 1905 1906 /* Transmit Interrupt Mask Register (TIMR) */ 1907 #define YUKON_TIMR 0x0050 1908 1909 /* Receive Interrupt Mask Register (RIMR) */ 1910 #define YUKON_RIMR 0x0054 1911 1912 /* Transmit and Receive Interrupt Mask Register (TRIMR) */ 1913 #define YUKON_TRIMR 0x0058 1914 1915 /* SMI Control Register (SMICR) */ 1916 #define YUKON_SMICR 0x0080 1917 1918 #define YU_SMICR_PHYAD(x) (((x) & 0x1f) << 11) 1919 #define YU_SMICR_REGAD(x) (((x) & 0x1f) << 6) 1920 #define YU_SMICR_OPCODE 0x0020 /* opcode (0 - write, 1 - read) */ 1921 #define YU_SMICR_OP_READ 0x0020 /* opcode read */ 1922 #define YU_SMICR_OP_WRITE 0x0000 /* opcode write */ 1923 #define YU_SMICR_READ_VALID 0x0010 /* read valid */ 1924 #define YU_SMICR_BUSY 0x0008 /* busy (writing) */ 1925 1926 /* SMI Data Register (SMIDR) */ 1927 #define YUKON_SMIDR 0x0084 1928 1929 /* PHY Address Register (PAR) */ 1930 #define YUKON_PAR 0x0088 1931 1932 #define YU_PAR_MIB_CLR 0x0020 /* MIB Counters Clear Mode */ 1933 #define YU_PAR_LOAD_TSTCNT 0x0010 /* Load count 0xfffffff0 into cntr */ 1934 1935 /* Receive status */ 1936 #define YU_RXSTAT_FOFL 0x00000001 /* Rx FIFO overflow */ 1937 #define YU_RXSTAT_CRCERR 0x00000002 /* CRC error */ 1938 #define YU_RXSTAT_FRAGMENT 0x00000008 /* fragment */ 1939 #define YU_RXSTAT_LONGERR 0x00000010 /* too long packet */ 1940 #define YU_RXSTAT_MIIERR 0x00000020 /* MII error */ 1941 #define YU_RXSTAT_BADFC 0x00000040 /* bad flow-control packet */ 1942 #define YU_RXSTAT_GOODFC 0x00000080 /* good flow-control packet */ 1943 #define YU_RXSTAT_RXOK 0x00000100 /* receive OK (Good packet) */ 1944 #define YU_RXSTAT_BROADCAST 0x00000200 /* broadcast packet */ 1945 #define YU_RXSTAT_MULTICAST 0x00000400 /* multicast packet */ 1946 #define YU_RXSTAT_RUNT 0x00000800 /* undersize packet */ 1947 #define YU_RXSTAT_JABBER 0x00001000 /* jabber packet */ 1948 #define YU_RXSTAT_VLAN 0x00002000 /* VLAN packet */ 1949 #define YU_RXSTAT_LENSHIFT 16 1950 1951 #define YU_RXSTAT_BYTES(x) ((x) >> YU_RXSTAT_LENSHIFT) 1952 1953 /* 1954 * Registers and data structures for the XaQti Corporation XMAC II 1955 * Gigabit Ethernet MAC. Datasheet is available from http://www.xaqti.com. 1956 * The XMAC can be programmed for 16-bit or 32-bit register access modes. 1957 * The SysKonnect gigabit ethernet adapters use 16-bit mode, so that's 1958 * how the registers are laid out here. 1959 */ 1960 1961 #define XM_DEVICEID 0x00E0AE20 1962 #define XM_XAQTI_OUI 0x00E0AE 1963 1964 #define XM_XMAC_REV(x) (((x) & 0x000000E0) >> 5) 1965 1966 #define XM_XMAC_REV_B2 0x0 1967 #define XM_XMAC_REV_C1 0x1 1968 1969 #define XM_MMUCMD 0x0000 1970 #define XM_POFF 0x0008 1971 #define XM_BURST 0x000C 1972 #define XM_VLAN_TAGLEV1 0x0010 1973 #define XM_VLAN_TAGLEV2 0x0014 1974 #define XM_TXCMD 0x0020 1975 #define XM_TX_RETRYLIMIT 0x0024 1976 #define XM_TX_SLOTTIME 0x0028 1977 #define XM_TX_IPG 0x003C 1978 #define XM_RXCMD 0x0030 1979 #define XM_PHY_ADDR 0x0034 1980 #define XM_PHY_DATA 0x0038 1981 #define XM_GPIO 0x0040 1982 #define XM_IMR 0x0044 1983 #define XM_ISR 0x0048 1984 #define XM_HWCFG 0x004C 1985 #define XM_TX_LOWAT 0x0060 1986 #define XM_TX_HIWAT 0x0062 1987 #define XM_TX_REQTHRESH_LO 0x0064 1988 #define XM_TX_REQTHRESH_HI 0x0066 1989 #define XM_TX_REQTHRESH XM_TX_REQTHRESH_LO 1990 #define XM_PAUSEDST0 0x0068 1991 #define XM_PAUSEDST1 0x006A 1992 #define XM_PAUSEDST2 0x006C 1993 #define XM_CTLPARM_LO 0x0070 1994 #define XM_CTLPARM_HI 0x0072 1995 #define XM_CTLPARM XM_CTLPARM_LO 1996 #define XM_OPCODE_PAUSE_TIMER 0x0074 1997 #define XM_TXSTAT_LIFO 0x0078 1998 1999 /* 2000 * Perfect filter registers. The XMAC has a table of 16 perfect 2001 * filter entries, spaced 8 bytes apart. This is in addition to 2002 * the station address registers, which appear below. 2003 */ 2004 #define XM_RXFILT_BASE 0x0080 2005 #define XM_RXFILT_END 0x0107 2006 #define XM_RXFILT_MAX 16 2007 #define XM_RXFILT_ENTRY(ent) (XM_RXFILT_BASE + ((ent * 8))) 2008 2009 /* Primary station address. */ 2010 #define XM_PAR0 0x0108 2011 #define XM_PAR1 0x010A 2012 #define XM_PAR2 0x010C 2013 2014 /* 64-bit multicast hash table registers */ 2015 #define XM_MAR0 0x0110 2016 #define XM_MAR1 0x0112 2017 #define XM_MAR2 0x0114 2018 #define XM_MAR3 0x0116 2019 #define XM_RX_LOWAT 0x0118 2020 #define XM_RX_HIWAT 0x011A 2021 #define XM_RX_REQTHRESH_LO 0x011C 2022 #define XM_RX_REQTHRESH_HI 0x011E 2023 #define XM_RX_REQTHRESH XM_RX_REQTHRESH_LO 2024 #define XM_DEVID_LO 0x0120 2025 #define XM_DEVID_HI 0x0122 2026 #define XM_DEVID XM_DEVID_LO 2027 #define XM_MODE_LO 0x0124 2028 #define XM_MODE_HI 0x0126 2029 #define XM_MODE XM_MODE_LO 2030 #define XM_LASTSRC0 0x0128 2031 #define XM_LASTSRC1 0x012A 2032 #define XM_LASTSRC2 0x012C 2033 #define XM_TSTAMP_READ 0x0130 2034 #define XM_TSTAMP_LOAD 0x0134 2035 #define XM_STATS_CMD 0x0200 2036 #define XM_RXCNT_EVENT_LO 0x0204 2037 #define XM_RXCNT_EVENT_HI 0x0206 2038 #define XM_RXCNT_EVENT XM_RXCNT_EVENT_LO 2039 #define XM_TXCNT_EVENT_LO 0x0208 2040 #define XM_TXCNT_EVENT_HI 0x020A 2041 #define XM_TXCNT_EVENT XM_TXCNT_EVENT_LO 2042 #define XM_RXCNT_EVMASK_LO 0x020C 2043 #define XM_RXCNT_EVMASK_HI 0x020E 2044 #define XM_RXCNT_EVMASK XM_RXCNT_EVMASK_LO 2045 #define XM_TXCNT_EVMASK_LO 0x0210 2046 #define XM_TXCNT_EVMASK_HI 0x0212 2047 #define XM_TXCNT_EVMASK XM_TXCNT_EVMASK_LO 2048 2049 /* Statistics command register */ 2050 #define XM_STATCMD_CLR_TX 0x0001 2051 #define XM_STATCMD_CLR_RX 0x0002 2052 #define XM_STATCMD_COPY_TX 0x0004 2053 #define XM_STATCMD_COPY_RX 0x0008 2054 #define XM_STATCMD_SNAP_TX 0x0010 2055 #define XM_STATCMD_SNAP_RX 0x0020 2056 2057 /* TX statistics registers */ 2058 #define XM_TXSTATS_PKTSOK 0x280 2059 #define XM_TXSTATS_BYTESOK_HI 0x284 2060 #define XM_TXSTATS_BYTESOK_LO 0x288 2061 #define XM_TXSTATS_BCASTSOK 0x28C 2062 #define XM_TXSTATS_MCASTSOK 0x290 2063 #define XM_TXSTATS_UCASTSOK 0x294 2064 #define XM_TXSTATS_GIANTS 0x298 2065 #define XM_TXSTATS_BURSTCNT 0x29C 2066 #define XM_TXSTATS_PAUSEPKTS 0x2A0 2067 #define XM_TXSTATS_MACCTLPKTS 0x2A4 2068 #define XM_TXSTATS_SINGLECOLS 0x2A8 2069 #define XM_TXSTATS_MULTICOLS 0x2AC 2070 #define XM_TXSTATS_EXCESSCOLS 0x2B0 2071 #define XM_TXSTATS_LATECOLS 0x2B4 2072 #define XM_TXSTATS_DEFER 0x2B8 2073 #define XM_TXSTATS_EXCESSDEFER 0x2BC 2074 #define XM_TXSTATS_UNDERRUN 0x2C0 2075 #define XM_TXSTATS_CARRIERSENSE 0x2C4 2076 #define XM_TXSTATS_UTILIZATION 0x2C8 2077 #define XM_TXSTATS_64 0x2D0 2078 #define XM_TXSTATS_65_127 0x2D4 2079 #define XM_TXSTATS_128_255 0x2D8 2080 #define XM_TXSTATS_256_511 0x2DC 2081 #define XM_TXSTATS_512_1023 0x2E0 2082 #define XM_TXSTATS_1024_MAX 0x2E4 2083 2084 /* RX statistics registers */ 2085 #define XM_RXSTATS_PKTSOK 0x300 2086 #define XM_RXSTATS_BYTESOK_HI 0x304 2087 #define XM_RXSTATS_BYTESOK_LO 0x308 2088 #define XM_RXSTATS_BCASTSOK 0x30C 2089 #define XM_RXSTATS_MCASTSOK 0x310 2090 #define XM_RXSTATS_UCASTSOK 0x314 2091 #define XM_RXSTATS_PAUSEPKTS 0x318 2092 #define XM_RXSTATS_MACCTLPKTS 0x31C 2093 #define XM_RXSTATS_BADPAUSEPKTS 0x320 2094 #define XM_RXSTATS_BADMACCTLPKTS 0x324 2095 #define XM_RXSTATS_BURSTCNT 0x328 2096 #define XM_RXSTATS_MISSEDPKTS 0x32C 2097 #define XM_RXSTATS_FRAMEERRS 0x330 2098 #define XM_RXSTATS_OVERRUN 0x334 2099 #define XM_RXSTATS_JABBER 0x338 2100 #define XM_RXSTATS_CARRLOSS 0x33C 2101 #define XM_RXSTATS_INRNGLENERR 0x340 2102 #define XM_RXSTATS_SYMERR 0x344 2103 #define XM_RXSTATS_SHORTEVENT 0x348 2104 #define XM_RXSTATS_RUNTS 0x34C 2105 #define XM_RXSTATS_GIANTS 0x350 2106 #define XM_RXSTATS_CRCERRS 0x354 2107 #define XM_RXSTATS_CEXTERRS 0x35C 2108 #define XM_RXSTATS_UTILIZATION 0x360 2109 #define XM_RXSTATS_64 0x368 2110 #define XM_RXSTATS_65_127 0x36C 2111 #define XM_RXSTATS_128_255 0x370 2112 #define XM_RXSTATS_256_511 0x374 2113 #define XM_RXSTATS_512_1023 0x378 2114 #define XM_RXSTATS_1024_MAX 0x37C 2115 2116 #define XM_MMUCMD_TX_ENB 0x0001 2117 #define XM_MMUCMD_RX_ENB 0x0002 2118 #define XM_MMUCMD_GMIILOOP 0x0004 2119 #define XM_MMUCMD_RATECTL 0x0008 2120 #define XM_MMUCMD_GMIIFDX 0x0010 2121 #define XM_MMUCMD_NO_MGMT_PRMB 0x0020 2122 #define XM_MMUCMD_SIMCOL 0x0040 2123 #define XM_MMUCMD_FORCETX 0x0080 2124 #define XM_MMUCMD_LOOPENB 0x0200 2125 #define XM_MMUCMD_IGNPAUSE 0x0400 2126 #define XM_MMUCMD_PHYBUSY 0x0800 2127 #define XM_MMUCMD_PHYDATARDY 0x1000 2128 2129 #define XM_TXCMD_AUTOPAD 0x0001 2130 #define XM_TXCMD_NOCRC 0x0002 2131 #define XM_TXCMD_NOPREAMBLE 0x0004 2132 #define XM_TXCMD_NOGIGAMODE 0x0008 2133 #define XM_TXCMD_SAMPLELINE 0x0010 2134 #define XM_TXCMD_ENCBYPASS 0x0020 2135 #define XM_TXCMD_XMITBK2BK 0x0040 2136 #define XM_TXCMD_FAIRSHARE 0x0080 2137 2138 #define XM_RXCMD_DISABLE_CEXT 0x0001 2139 #define XM_RXCMD_STRIPPAD 0x0002 2140 #define XM_RXCMD_SAMPLELINE 0x0004 2141 #define XM_RXCMD_SELFRX 0x0008 2142 #define XM_RXCMD_STRIPFCS 0x0010 2143 #define XM_RXCMD_TRANSPARENT 0x0020 2144 #define XM_RXCMD_IPGCAPTURE 0x0040 2145 #define XM_RXCMD_BIGPKTOK 0x0080 2146 #define XM_RXCMD_LENERROK 0x0100 2147 2148 #define XM_GPIO_GP0_SET 0x0001 2149 #define XM_GPIO_RESETSTATS 0x0004 2150 #define XM_GPIO_RESETMAC 0x0008 2151 #define XM_GPIO_FORCEINT 0x0020 2152 #define XM_GPIO_ANEGINPROG 0x0040 2153 2154 #define XM_IMR_RX_EOF 0x0001 2155 #define XM_IMR_TX_EOF 0x0002 2156 #define XM_IMR_TX_UNDERRUN 0x0004 2157 #define XM_IMR_RX_OVERRUN 0x0008 2158 #define XM_IMR_TX_STATS_OFLOW 0x0010 2159 #define XM_IMR_RX_STATS_OFLOW 0x0020 2160 #define XM_IMR_TSTAMP_OFLOW 0x0040 2161 #define XM_IMR_AUTONEG_DONE 0x0080 2162 #define XM_IMR_NEXTPAGE_RDY 0x0100 2163 #define XM_IMR_PAGE_RECEIVED 0x0200 2164 #define XM_IMR_LP_REQCFG 0x0400 2165 #define XM_IMR_GP0_SET 0x0800 2166 #define XM_IMR_FORCEINTR 0x1000 2167 #define XM_IMR_TX_ABORT 0x2000 2168 #define XM_IMR_LINKEVENT 0x4000 2169 2170 #define XM_INTRS \ 2171 (~(XM_IMR_GP0_SET|XM_IMR_AUTONEG_DONE|XM_IMR_TX_UNDERRUN)) 2172 2173 #define XM_ISR_RX_EOF 0x0001 2174 #define XM_ISR_TX_EOF 0x0002 2175 #define XM_ISR_TX_UNDERRUN 0x0004 2176 #define XM_ISR_RX_OVERRUN 0x0008 2177 #define XM_ISR_TX_STATS_OFLOW 0x0010 2178 #define XM_ISR_RX_STATS_OFLOW 0x0020 2179 #define XM_ISR_TSTAMP_OFLOW 0x0040 2180 #define XM_ISR_AUTONEG_DONE 0x0080 2181 #define XM_ISR_NEXTPAGE_RDY 0x0100 2182 #define XM_ISR_PAGE_RECEIVED 0x0200 2183 #define XM_ISR_LP_REQCFG 0x0400 2184 #define XM_ISR_GP0_SET 0x0800 2185 #define XM_ISR_FORCEINTR 0x1000 2186 #define XM_ISR_TX_ABORT 0x2000 2187 #define XM_ISR_LINKEVENT 0x4000 2188 2189 #define XM_HWCFG_GENEOP 0x0008 2190 #define XM_HWCFG_SIGSTATCKH 0x0004 2191 #define XM_HWCFG_GMIIMODE 0x0001 2192 2193 #define XM_MODE_FLUSH_RXFIFO 0x00000001 2194 #define XM_MODE_FLUSH_TXFIFO 0x00000002 2195 #define XM_MODE_BIGENDIAN 0x00000004 2196 #define XM_MODE_RX_PROMISC 0x00000008 2197 #define XM_MODE_RX_NOBROAD 0x00000010 2198 #define XM_MODE_RX_NOMULTI 0x00000020 2199 #define XM_MODE_RX_NOUNI 0x00000040 2200 #define XM_MODE_RX_BADFRAMES 0x00000080 2201 #define XM_MODE_RX_CRCERRS 0x00000100 2202 #define XM_MODE_RX_GIANTS 0x00000200 2203 #define XM_MODE_RX_INRANGELEN 0x00000400 2204 #define XM_MODE_RX_RUNTS 0x00000800 2205 #define XM_MODE_RX_MACCTL 0x00001000 2206 #define XM_MODE_RX_USE_PERFECT 0x00002000 2207 #define XM_MODE_RX_USE_STATION 0x00004000 2208 #define XM_MODE_RX_USE_HASH 0x00008000 2209 #define XM_MODE_RX_ADDRPAIR 0x00010000 2210 #define XM_MODE_PAUSEONHI 0x00020000 2211 #define XM_MODE_PAUSEONLO 0x00040000 2212 #define XM_MODE_TIMESTAMP 0x00080000 2213 #define XM_MODE_SENDPAUSE 0x00100000 2214 #define XM_MODE_SENDCONTINUOUS 0x00200000 2215 #define XM_MODE_LE_STATUSWORD 0x00400000 2216 #define XM_MODE_AUTOFIFOPAUSE 0x00800000 2217 #define XM_MODE_EXPAUSEGEN 0x02000000 2218 #define XM_MODE_RX_INVERSE 0x04000000 2219 2220 #define XM_RXSTAT_MACCTL 0x00000001 2221 #define XM_RXSTAT_ERRFRAME 0x00000002 2222 #define XM_RXSTAT_CRCERR 0x00000004 2223 #define XM_RXSTAT_GIANT 0x00000008 2224 #define XM_RXSTAT_RUNT 0x00000010 2225 #define XM_RXSTAT_FRAMEERR 0x00000020 2226 #define XM_RXSTAT_INRANGEERR 0x00000040 2227 #define XM_RXSTAT_CARRIERERR 0x00000080 2228 #define XM_RXSTAT_COLLERR 0x00000100 2229 #define XM_RXSTAT_802_3 0x00000200 2230 #define XM_RXSTAT_CARREXTERR 0x00000400 2231 #define XM_RXSTAT_BURSTMODE 0x00000800 2232 #define XM_RXSTAT_UNICAST 0x00002000 2233 #define XM_RXSTAT_MULTICAST 0x00004000 2234 #define XM_RXSTAT_BROADCAST 0x00008000 2235 #define XM_RXSTAT_VLAN_LEV1 0x00010000 2236 #define XM_RXSTAT_VLAN_LEV2 0x00020000 2237 #define XM_RXSTAT_LEN 0xFFFC0000 2238 #define XM_RXSTAT_LENSHIFT 18 2239 2240 #define XM_RXSTAT_BYTES(x) ((x) >> XM_RXSTAT_LENSHIFT) 2241 2242 /* 2243 * XMAC PHY registers, indirectly accessed through 2244 * XM_PHY_ADDR and XM_PHY_REG. 2245 */ 2246 2247 #define XM_PHY_BMCR 0x0000 /* control */ 2248 #define XM_PHY_BMSR 0x0001 /* status */ 2249 #define XM_PHY_VENID 0x0002 /* vendor id */ 2250 #define XM_PHY_DEVID 0x0003 /* device id */ 2251 #define XM_PHY_ANAR 0x0004 /* autoneg advertisement */ 2252 #define XM_PHY_LPAR 0x0005 /* link partner ability */ 2253 #define XM_PHY_ANEXP 0x0006 /* autoneg expansion */ 2254 #define XM_PHY_NEXTP 0x0007 /* nextpage */ 2255 #define XM_PHY_LPNEXTP 0x0008 /* link partner's nextpage */ 2256 #define XM_PHY_EXTSTS 0x000F /* extended status */ 2257 #define XM_PHY_RESAB 0x0010 /* resolved ability */ 2258 2259 #define XM_BMCR_DUPLEX 0x0100 2260 #define XM_BMCR_RENEGOTIATE 0x0200 2261 #define XM_BMCR_AUTONEGENBL 0x1000 2262 #define XM_BMCR_LOOPBACK 0x4000 2263 #define XM_BMCR_RESET 0x8000 2264 2265 #define XM_BMSR_EXTCAP 0x0001 2266 #define XM_BMSR_LINKSTAT 0x0004 2267 #define XM_BMSR_AUTONEGABLE 0x0008 2268 #define XM_BMSR_REMFAULT 0x0010 2269 #define XM_BMSR_AUTONEGDONE 0x0020 2270 #define XM_BMSR_EXTSTAT 0x0100 2271 2272 #define XM_VENID_XAQTI 0xD14C 2273 #define XM_DEVID_XMAC 0x0002 2274 2275 #define XM_ANAR_FULLDUPLEX 0x0020 2276 #define XM_ANAR_HALFDUPLEX 0x0040 2277 #define XM_ANAR_PAUSEBITS 0x0180 2278 #define XM_ANAR_REMFAULTBITS 0x1800 2279 #define XM_ANAR_ACK 0x4000 2280 #define XM_ANAR_NEXTPAGE 0x8000 2281 2282 #define XM_LPAR_FULLDUPLEX 0x0020 2283 #define XM_LPAR_HALFDUPLEX 0x0040 2284 #define XM_LPAR_PAUSEBITS 0x0180 2285 #define XM_LPAR_REMFAULTBITS 0x1800 2286 #define XM_LPAR_ACK 0x4000 2287 #define XM_LPAR_NEXTPAGE 0x8000 2288 2289 #define XM_PAUSE_NOPAUSE 0x0000 2290 #define XM_PAUSE_SYMPAUSE 0x0080 2291 #define XM_PAUSE_ASYMPAUSE 0x0100 2292 #define XM_PAUSE_BOTH 0x0180 2293 2294 #define XM_REMFAULT_LINKOK 0x0000 2295 #define XM_REMFAULT_LINKFAIL 0x0800 2296 #define XM_REMFAULT_OFFLINE 0x1000 2297 #define XM_REMFAULT_ANEGERR 0x1800 2298 2299 #define XM_ANEXP_GOTPAGE 0x0002 2300 #define XM_ANEXP_NEXTPAGE_SELF 0x0004 2301 #define XM_ANEXP_NEXTPAGE_LP 0x0008 2302 2303 #define XM_NEXTP_MESSAGE 0x07FF 2304 #define XM_NEXTP_TOGGLE 0x0800 2305 #define XM_NEXTP_ACK2 0x1000 2306 #define XM_NEXTP_MPAGE 0x2000 2307 #define XM_NEXTP_ACK1 0x4000 2308 #define XM_NEXTP_NPAGE 0x8000 2309 2310 #define XM_LPNEXTP_MESSAGE 0x07FF 2311 #define XM_LPNEXTP_TOGGLE 0x0800 2312 #define XM_LPNEXTP_ACK2 0x1000 2313 #define XM_LPNEXTP_MPAGE 0x2000 2314 #define XM_LPNEXTP_ACK1 0x4000 2315 #define XM_LPNEXTP_NPAGE 0x8000 2316 2317 #define XM_EXTSTS_HALFDUPLEX 0x4000 2318 #define XM_EXTSTS_FULLDUPLEX 0x8000 2319 2320 #define XM_RESAB_PAUSEMISMATCH 0x0008 2321 #define XM_RESAB_ABLMISMATCH 0x0010 2322 #define XM_RESAB_FDMODESEL 0x0020 2323 #define XM_RESAB_HDMODESEL 0x0040 2324 #define XM_RESAB_PAUSEBITS 0x0180 2325 2326 #define SK_HASH_BITS 6 2327 #endif /* _DEV_PCI_IF_SKREG_H_ */ 2328
Indexes created Sat Sep 20 22:09:52 GMT 2025