1 /* $NetBSD: mb89352var.h,v 1.16 2022/01/01 21:07:14 andvar Exp $ */ 2 /* NecBSD: mb89352var.h,v 1.4 1998/03/14 07:31:22 kmatsuda Exp */ 3 4 /*- 5 * Copyright (c) 1996-1999 The NetBSD Foundation, Inc. 6 * All rights reserved. 7 * 8 * This code is derived from software contributed to The NetBSD Foundation 9 * by Charles M. Hannum, Masaru Oki and Kouichi Matsuda. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 * 32 * Copyright (c) 1994 Jarle Greipsland 33 * All rights reserved. 34 * 35 * Redistribution and use in source and binary forms, with or without 36 * modification, are permitted provided that the following conditions 37 * are met: 38 * 1. Redistributions of source code must retain the above copyright 39 * notice, this list of conditions and the following disclaimer. 40 * 2. Redistributions in binary form must reproduce the above copyright 41 * notice, this list of conditions and the following disclaimer in the 42 * documentation and/or other materials provided with the distribution. 43 * 3. The name of the author may not be used to endorse or promote products 44 * derived from this software without specific prior written permission. 45 * 46 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 47 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 48 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 49 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, 50 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 51 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 52 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 53 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 54 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN 55 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 56 * POSSIBILITY OF SUCH DAMAGE. 57 */ 58 /* 59 * [NetBSD for NEC PC-98 series] 60 * Copyright (c) 1996, 1997, 1998 61 * NetBSD/pc98 porting staff. All rights reserved. 62 * Copyright (c) 1996, 1997, 1998 63 * Kouich Matsuda. All rights reserved. 64 */ 65 66 #ifndef _MB89352VAR_H_ 67 #define _MB89352VAR_H_ 68 /* 69 * ACB. Holds additional information for each SCSI command Comments: We 70 * need a separate scsi command block because we may need to overwrite it 71 * with a request sense command. Basically, we refrain from fiddling with 72 * the scsi_xfer struct (except do the expected updating of return values). 73 * We'll generally update: xs->{flags,resid,error,sense,status} and 74 * occasionally xs->retries. 75 */ 76 struct spc_acb { 77 struct scsipi_generic scsipi_cmd; 78 int scsipi_cmd_length; 79 uint8_t *data_addr; /* Saved data pointer */ 80 int data_length; /* Residue */ 81 82 uint8_t target_stat; /* SCSI status byte */ 83 84 #ifdef notdef 85 struct spc_dma_seg dma[SPC_NSEG]; /* Physical addresses+len */ 86 #endif 87 88 TAILQ_ENTRY(spc_acb) chain; 89 struct scsipi_xfer *xs; /* SCSI xfer ctrl block from above */ 90 u_int flags; 91 #define ACB_ALLOC 0x01 92 #define ACB_NEXUS 0x02 93 #define ACB_SENSE 0x04 94 #define ACB_ABORT 0x40 95 #define ACB_RESET 0x80 96 int timeout; 97 }; 98 99 /* 100 * Some info about each (possible) target on the SCSI bus. This should 101 * probably have been a "per target+lunit" structure, but we'll leave it at 102 * this for now. 103 */ 104 struct spc_tinfo { 105 int cmds; /* #commands processed */ 106 int dconns; /* #disconnects */ 107 int touts; /* #timeouts */ 108 int perrs; /* #parity errors */ 109 int senses; /* #request sense commands sent */ 110 ushort lubusy; /* What local units/subr. are busy? */ 111 u_char flags; 112 #define DO_SYNC 0x01 /* (Re)Negotiate synchronous options */ 113 #define DO_WIDE 0x02 /* (Re)Negotiate wide options */ 114 uint8_t period; /* Period suggestion */ 115 uint8_t offset; /* Offset suggestion */ 116 uint8_t width; /* Width suggestion */ 117 }; 118 119 struct spc_softc { 120 device_t sc_dev; 121 122 bus_space_tag_t sc_iot; 123 bus_space_handle_t sc_ioh; 124 125 struct scsipi_channel sc_channel; /* prototype for subdevs */ 126 struct scsipi_adapter sc_adapter; 127 128 TAILQ_HEAD(, spc_acb) free_list, ready_list, nexus_list; 129 struct spc_acb *sc_nexus; /* current command */ 130 struct spc_acb sc_acb[8]; 131 struct spc_tinfo sc_tinfo[8]; 132 133 /* Data about the current nexus (updated for every cmd switch) */ 134 uint8_t *sc_dp; /* Current data pointer */ 135 size_t sc_dleft; /* Data bytes left to transfer */ 136 uint8_t *sc_cp; /* Current command pointer */ 137 size_t sc_cleft; /* Command bytes left to transfer */ 138 139 /* Adapter state */ 140 uint8_t sc_phase; /* Current bus phase */ 141 uint8_t sc_prevphase; /* Previous bus phase */ 142 uint8_t sc_state; /* State applicable to the adapter */ 143 #define SPC_INIT 0 144 #define SPC_IDLE 1 145 #define SPC_SELECTING 2 /* SCSI command is arbiting */ 146 #define SPC_RESELECTED 3 /* Has been reselected */ 147 #define SPC_CONNECTED 4 /* Actively using the SCSI bus */ 148 #define SPC_DISCONNECT 5 /* MSG_DISCONNECT received */ 149 #define SPC_CMDCOMPLETE 6 /* MSG_CMDCOMPLETE received */ 150 #define SPC_CLEANING 7 151 uint8_t sc_flags; 152 #define SPC_DROP_MSGIN 0x01 /* Discard all msgs (parity err detected) */ 153 #define SPC_ABORTING 0x02 /* Bailing out */ 154 #define SPC_DOINGDMA 0x04 /* doing DMA */ 155 #define SPC_INACTIVE 0x80 /* The FIFO data path is active! */ 156 uint8_t sc_selid; /* Reselection ID */ 157 device_t sc_child;/* Our child */ 158 159 /* Message stuff */ 160 uint8_t sc_msgpriq; /* Messages we want to send */ 161 uint8_t sc_msgoutq; /* Messages sent during last MESSAGE OUT */ 162 uint8_t sc_lastmsg; /* Message last transmitted */ 163 uint8_t sc_currmsg; /* Message currently ready to transmit */ 164 #define SEND_DEV_RESET 0x01 165 #define SEND_PARITY_ERROR 0x02 166 #define SEND_INIT_DET_ERR 0x04 167 #define SEND_REJECT 0x08 168 #define SEND_IDENTIFY 0x10 169 #define SEND_ABORT 0x20 170 #define SEND_SDTR 0x40 171 #define SEND_WDTR 0x80 172 #define SPC_MAX_MSG_LEN 8 173 uint8_t sc_omess[SPC_MAX_MSG_LEN]; 174 uint8_t *sc_omp; /* Outgoing message pointer */ 175 uint8_t sc_imess[SPC_MAX_MSG_LEN]; 176 uint8_t *sc_imp; /* Incoming message pointer */ 177 178 /* Hardware stuff */ 179 int sc_initiator; /* Our scsi id */ 180 int sc_freq; /* Clock frequency in MHz */ 181 int sc_minsync; /* Minimum sync period / 4 */ 182 int sc_maxsync; /* Maximum sync period / 4 */ 183 184 /* DMA function set from MD code */ 185 void (*sc_dma_start)(struct spc_softc *, void *, size_t, int); 186 void (*sc_dma_done)(struct spc_softc *); 187 }; 188 189 #if SPC_DEBUG 190 #define SPC_SHOWACBS 0x01 191 #define SPC_SHOWINTS 0x02 192 #define SPC_SHOWCMDS 0x04 193 #define SPC_SHOWMISC 0x08 194 #define SPC_SHOWTRACE 0x10 195 #define SPC_SHOWSTART 0x20 196 #define SPC_DOBREAK 0x40 197 extern int spc_debug; /* SPC_SHOWSTART|SPC_SHOWMISC|SPC_SHOWTRACE; */ 198 #define SPC_PRINT(b, s) \ 199 do { \ 200 if ((spc_debug & (b)) != 0) \ 201 printf s; \ 202 } while (/* CONSTCOND */ 0) 203 #define SPC_BREAK() \ 204 do { \ 205 if ((spc_debug & SPC_DOBREAK) != 0) \ 206 Debugger(); \ 207 } while (/* CONSTCOND */ 0) 208 #define SPC_ASSERT(x) \ 209 do { \ 210 if (x) { \ 211 ; \ 212 } else { \ 213 printf("%s at line %d: assertion failed\n", \ 214 device_xname(sc->sc_dev), __LINE__); \ 215 Debugger(); \ 216 } \ 217 } while (/* CONSTCOND */ 0) 218 #else 219 #define SPC_PRINT(b, s) 220 #define SPC_BREAK() 221 #define SPC_ASSERT(x) 222 #endif 223 224 #define SPC_ACBS(s) SPC_PRINT(SPC_SHOWACBS, s) 225 #define SPC_INTS(s) SPC_PRINT(SPC_SHOWINTS, s) 226 #define SPC_CMDS(s) SPC_PRINT(SPC_SHOWCMDS, s) 227 #define SPC_MISC(s) SPC_PRINT(SPC_SHOWMISC, s) 228 #define SPC_TRACE(s) SPC_PRINT(SPC_SHOWTRACE, s) 229 #define SPC_START(s) SPC_PRINT(SPC_SHOWSTART, s) 230 231 void spc_attach(struct spc_softc *); 232 void spc_childdet(device_t, device_t); 233 int spc_detach(device_t, int); 234 int spc_intr(void *); 235 int spc_find(bus_space_tag_t, bus_space_handle_t, int); 236 void spc_init(struct spc_softc *, int); 237 void spc_sched(struct spc_softc *); 238 #endif /* _MB89352VAR_H_ */ 239
Indexes created Sun Sep 21 16:09:51 GMT 2025