Home | History | Annotate | Line # | Download | only in tx
      1 /*	$NetBSD: txcom.c,v 1.53 2024/09/23 19:11:34 andvar Exp $ */
      2 
      3 /*-
      4  * Copyright (c) 1999, 2000, 2004 The NetBSD Foundation, Inc.
      5  * All rights reserved.
      6  *
      7  * This code is derived from software contributed to The NetBSD Foundation
      8  * by UCHIYAMA Yasushi.
      9  *
     10  * Redistribution and use in source and binary forms, with or without
     11  * modification, are permitted provided that the following conditions
     12  * are met:
     13  * 1. Redistributions of source code must retain the above copyright
     14  *    notice, this list of conditions and the following disclaimer.
     15  * 2. Redistributions in binary form must reproduce the above copyright
     16  *    notice, this list of conditions and the following disclaimer in the
     17  *    documentation and/or other materials provided with the distribution.
     18  *
     19  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     20  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     21  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     22  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     23  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     29  * POSSIBILITY OF SUCH DAMAGE.
     30  */
     31 
     32 #include <sys/cdefs.h>
     33 __KERNEL_RCSID(0, "$NetBSD: txcom.c,v 1.53 2024/09/23 19:11:34 andvar Exp $");
     34 
     35 #include "opt_tx39uart_debug.h"
     36 
     37 #include <sys/param.h>
     38 #include <sys/systm.h>
     39 #include <sys/kernel.h>
     40 #include <sys/device.h>
     41 #include <sys/kmem.h>
     42 #include <sys/kauth.h>
     43 
     44 #include <sys/proc.h> /* tsleep/wakeup */
     45 
     46 #include <sys/ioctl.h>
     47 #include <sys/select.h>
     48 #include <sys/file.h>
     49 
     50 #include <sys/tty.h>
     51 #include <sys/conf.h>
     52 #include <dev/cons.h> /* consdev */
     53 
     54 #include <machine/bus.h>
     55 #include <machine/config_hook.h>
     56 
     57 #include <hpcmips/tx/tx39var.h>
     58 #include <hpcmips/tx/tx39icureg.h>
     59 #include <hpcmips/tx/tx39uartvar.h>
     60 #include <hpcmips/tx/tx39uartreg.h>
     61 
     62 #include <hpcmips/tx/tx39irvar.h>
     63 
     64 #include <hpcmips/tx/tx39clockreg.h> /* XXX */
     65 
     66 /*
     67  * UARTA channel has DTR, DSR, RTS, CTS lines. and they  wired to MFIO/IO port.
     68  */
     69 #define IS_COM0(s)	((s) == 0)
     70 #define IS_COM1(s)	((s) == 1)
     71 #define ON		((void *)1)
     72 #define OFF		((void *)0)
     73 
     74 #ifdef	TX39UART_DEBUG
     75 #define DPRINTF_ENABLE
     76 #define DPRINTF_DEBUG	tx39uart_debug
     77 #endif
     78 #include <machine/debug.h>
     79 
     80 #define TXCOM_HW_CONSOLE	0x40
     81 #define	TXCOM_RING_SIZE		256 /* must be a power of two! */
     82 #define TXCOM_RING_MASK		(TXCOM_RING_SIZE - 1)
     83 
     84 struct txcom_chip {
     85 	tx_chipset_tag_t sc_tc;
     86 	int sc_slot;	/* UARTA or UARTB */
     87 	int sc_cflag;
     88 	int sc_speed;
     89 	int sc_swflags;
     90 	int sc_hwflags;
     91 
     92 	int sc_dcd;
     93 	int sc_msr_cts;
     94 	int sc_tx_stopped;
     95 };
     96 
     97 struct txcom_softc {
     98 	struct tty		*sc_tty;
     99 	struct txcom_chip	*sc_chip;
    100 
    101 	void		*sc_txsoft_cookie;
    102 	void		*sc_rxsoft_cookie;
    103 
    104  	u_int8_t	*sc_tba;	/* transmit buffer address */
    105  	int		sc_tbc;		/* transmit byte count */
    106 	int		sc_heldtbc;
    107 	u_int8_t	*sc_rbuf;	/* receive buffer address */
    108 	int		sc_rbput;	/* receive byte count */
    109 	int		sc_rbget;
    110 };
    111 
    112 extern struct cfdriver txcom_cd;
    113 
    114 int	txcom_match(device_t, cfdata_t, void *);
    115 void	txcom_attach(device_t, device_t, void *);
    116 int	txcom_print(void *, const char *);
    117 
    118 int	txcom_txintr(void *);
    119 int	txcom_rxintr(void *);
    120 int	txcom_frameerr_intr(void *);
    121 int	txcom_parityerr_intr(void *);
    122 int	txcom_break_intr(void *);
    123 
    124 void	txcom_rxsoft(void *);
    125 void	txcom_txsoft(void *);
    126 
    127 int	txcom_stsoft(void *);
    128 int	txcom_stsoft2(void *);
    129 int	txcom_stsoft3(void *);
    130 int	txcom_stsoft4(void *);
    131 
    132 
    133 void	txcom_shutdown(struct txcom_softc *);
    134 void	txcom_break(struct txcom_softc *, int);
    135 void	txcom_modem(struct txcom_softc *, int);
    136 void	txcomstart(struct tty *);
    137 int	txcomparam(struct tty *, struct termios *);
    138 
    139 void	txcom_reset	(struct txcom_chip *);
    140 int	txcom_enable	(struct txcom_chip *, bool);
    141 void	txcom_disable	(struct txcom_chip *);
    142 void	txcom_setmode	(struct txcom_chip *);
    143 void	txcom_setbaudrate(struct txcom_chip *);
    144 int	txcom_cngetc	(dev_t);
    145 void	txcom_cnputc	(dev_t, int);
    146 void	txcom_cnpollc	(dev_t, int);
    147 
    148 int	txcom_dcd_hook(void *, int, long, void *);
    149 int	txcom_cts_hook(void *, int, long, void *);
    150 
    151 
    152 inline int	__txcom_txbufready(struct txcom_chip *, int);
    153 const char *__txcom_slotname(int);
    154 
    155 #ifdef TX39UARTDEBUG
    156 void	txcom_dump(struct txcom_chip *);
    157 #endif
    158 
    159 struct consdev txcomcons = {
    160 	NULL, NULL, txcom_cngetc, txcom_cnputc, txcom_cnpollc, NULL, NULL,
    161 	NULL, NODEV, CN_NORMAL
    162 };
    163 
    164 /* Serial console */
    165 struct txcom_chip txcom_chip;
    166 
    167 CFATTACH_DECL_NEW(txcom, sizeof(struct txcom_softc),
    168     txcom_match, txcom_attach, NULL, NULL);
    169 
    170 dev_type_open(txcomopen);
    171 dev_type_close(txcomclose);
    172 dev_type_read(txcomread);
    173 dev_type_write(txcomwrite);
    174 dev_type_ioctl(txcomioctl);
    175 dev_type_stop(txcomstop);
    176 dev_type_tty(txcomtty);
    177 dev_type_poll(txcompoll);
    178 
    179 const struct cdevsw txcom_cdevsw = {
    180 	.d_open = txcomopen,
    181 	.d_close = txcomclose,
    182 	.d_read = txcomread,
    183 	.d_write = txcomwrite,
    184 	.d_ioctl = txcomioctl,
    185 	.d_stop = txcomstop,
    186 	.d_tty = txcomtty,
    187 	.d_poll = txcompoll,
    188 	.d_mmap = nommap,
    189 	.d_kqfilter = ttykqfilter,
    190 	.d_discard = nodiscard,
    191 	.d_flag = D_TTY
    192 };
    193 
    194 int
    195 txcom_match(device_t parent, cfdata_t cf, void *aux)
    196 {
    197 	/* if the autoconfiguration got this far, there's a slot here */
    198 	return 1;
    199 }
    200 
    201 void
    202 txcom_attach(device_t parent, device_t self, void *aux)
    203 {
    204 	struct tx39uart_attach_args *ua = aux;
    205 	struct txcom_softc *sc = device_private(self);
    206 	tx_chipset_tag_t tc;
    207 	struct tty *tp;
    208 	struct txcom_chip *chip;
    209 	int slot, console;
    210 
    211 	/* Check this slot used as serial console */
    212 	console = (ua->ua_slot == txcom_chip.sc_slot) &&
    213 	    (txcom_chip.sc_hwflags & TXCOM_HW_CONSOLE);
    214 
    215 	if (console) {
    216 		sc->sc_chip = &txcom_chip;
    217 	} else {
    218 		sc->sc_chip = kmem_zalloc(sizeof(struct txcom_chip),
    219 		    KM_SLEEP);
    220 	}
    221 
    222 	chip = sc->sc_chip;
    223 	tc = chip->sc_tc = ua->ua_tc;
    224 	slot = chip->sc_slot = ua->ua_slot;
    225 
    226 #ifdef TX39UARTDEBUG
    227 	txcom_dump(chip);
    228 #endif
    229 	if (!console)
    230 		txcom_reset(chip);
    231 
    232 	sc->sc_rbuf = kmem_zalloc(TXCOM_RING_SIZE, KM_SLEEP);
    233 
    234 	tp = tty_alloc();
    235 	tp->t_oproc = txcomstart;
    236 	tp->t_param = txcomparam;
    237 	tp->t_hwiflow = NULL;
    238 	sc->sc_tty = tp;
    239 	tty_attach(tp);
    240 
    241 	if (ISSET(chip->sc_hwflags, TXCOM_HW_CONSOLE)) {
    242 		int maj;
    243 		/* locate the major number */
    244 		maj = cdevsw_lookup_major(&txcom_cdevsw);
    245 
    246 		cn_tab->cn_dev = makedev(maj, device_unit(self));
    247 
    248 		printf(": console");
    249 	}
    250 
    251 	printf("\n");
    252 
    253 	/*
    254 	 * Enable interrupt
    255 	 */
    256 #define TXCOMINTR(i, s) MAKEINTR(2, TX39_INTRSTATUS2_UART##i##INT(s))
    257 
    258 	tx_intr_establish(tc, TXCOMINTR(RX, slot), IST_EDGE, IPL_TTY,
    259 	    txcom_rxintr, sc);
    260 	tx_intr_establish(tc, TXCOMINTR(TX, slot), IST_EDGE, IPL_TTY,
    261 	    txcom_txintr, sc);
    262 	tx_intr_establish(tc, TXCOMINTR(RXOVERRUN, slot), IST_EDGE, IPL_TTY,
    263 	    txcom_rxintr, sc);
    264 	tx_intr_establish(tc, TXCOMINTR(TXOVERRUN, slot), IST_EDGE, IPL_TTY,
    265 	    txcom_txintr, sc);
    266 	tx_intr_establish(tc, TXCOMINTR(FRAMEERR, slot), IST_EDGE, IPL_TTY,
    267 	    txcom_frameerr_intr, sc);
    268 	tx_intr_establish(tc, TXCOMINTR(PARITYERR, slot), IST_EDGE, IPL_TTY,
    269 	    txcom_parityerr_intr, sc);
    270 	tx_intr_establish(tc, TXCOMINTR(BREAK, slot), IST_EDGE, IPL_TTY,
    271 	    txcom_break_intr, sc);
    272 
    273 	sc->sc_txsoft_cookie =
    274 	    softint_establish(SOFTINT_SERIAL, txcom_txsoft, sc);
    275 	sc->sc_rxsoft_cookie =
    276 	    softint_establish(SOFTINT_SERIAL, txcom_rxsoft, sc);
    277 
    278 	/*
    279 	 * UARTA has external signal line. (its wiring is platform dependent)
    280 	 */
    281 	if (IS_COM0(slot)) {
    282 		/* install DCD, CTS hooks. */
    283 		config_hook(CONFIG_HOOK_EVENT, CONFIG_HOOK_COM0_DCD,
    284 		    CONFIG_HOOK_EXCLUSIVE, txcom_dcd_hook, sc);
    285 		config_hook(CONFIG_HOOK_EVENT, CONFIG_HOOK_COM0_CTS,
    286 		    CONFIG_HOOK_EXCLUSIVE, txcom_cts_hook, sc);
    287 	}
    288 
    289 	/*
    290 	 * UARTB can connect IR module
    291 	 */
    292 	if (IS_COM1(slot)) {
    293 		struct txcom_attach_args tca;
    294 		tca.tca_tc = tc;
    295 		tca.tca_parent = self;
    296 		config_found(self, &tca, txcom_print, CFARGS_NONE);
    297 	}
    298 }
    299 
    300 int
    301 txcom_print(void *aux, const char *pnp)
    302 {
    303 	return pnp ? QUIET : UNCONF;
    304 }
    305 
    306 void
    307 txcom_reset(struct txcom_chip *chip)
    308 {
    309 	tx_chipset_tag_t tc;
    310 	int slot, ofs;
    311 	txreg_t reg;
    312 
    313 	tc = chip->sc_tc;
    314 	slot = chip->sc_slot;
    315 	ofs = TX39_UARTCTRL1_REG(slot);
    316 
    317 	/* Supply clock */
    318 	reg = tx_conf_read(tc, TX39_CLOCKCTRL_REG);
    319 	reg |= (slot ? TX39_CLOCK_ENUARTBCLK : TX39_CLOCK_ENUARTACLK);
    320 	tx_conf_write(tc, TX39_CLOCKCTRL_REG, reg);
    321 
    322 	/* reset UART module */
    323 	tx_conf_write(tc, ofs, 0);
    324 }
    325 
    326 int
    327 txcom_enable(struct txcom_chip *chip, bool console)
    328 {
    329 	tx_chipset_tag_t tc;
    330 	txreg_t reg;
    331 	int slot, ofs, timeout;
    332 
    333 	tc = chip->sc_tc;
    334 	slot = chip->sc_slot;
    335 	ofs = TX39_UARTCTRL1_REG(slot);
    336 
    337 	/*
    338 	 * External power supply (if any)
    339 	 * When serial console, Windows CE already powered on it.
    340 	 */
    341 	if (!console) {
    342 		config_hook_call(CONFIG_HOOK_POWERCONTROL,
    343 		    CONFIG_HOOK_POWERCONTROL_COM0, PWCTL_ON);
    344 		delay(3);
    345 	}
    346 
    347 	/* Supply clock */
    348 	reg = tx_conf_read(tc, TX39_CLOCKCTRL_REG);
    349 	reg |= (slot ? TX39_CLOCK_ENUARTBCLK : TX39_CLOCK_ENUARTACLK);
    350 	tx_conf_write(tc, TX39_CLOCKCTRL_REG, reg);
    351 
    352 	/*
    353 	 * XXX Disable DMA (DMA not coded yet)
    354 	 */
    355 	reg = tx_conf_read(tc, ofs);
    356 	reg &= ~(TX39_UARTCTRL1_ENDMARX | TX39_UARTCTRL1_ENDMATX);
    357 	tx_conf_write(tc, ofs, reg);
    358 
    359 	/* enable */
    360 	reg = tx_conf_read(tc, ofs);
    361 	reg |= TX39_UARTCTRL1_ENUART;
    362 	reg &= ~TX39_UARTCTRL1_ENBREAHALT;
    363 	tx_conf_write(tc, ofs, reg);
    364 
    365 	timeout = 100000;
    366 
    367 	while(!(tx_conf_read(tc, ofs) & TX39_UARTCTRL1_UARTON) &&
    368 	    --timeout > 0)
    369 		;
    370 
    371 	if (timeout == 0 && !cold) {
    372 		printf("%s never power up\n", __txcom_slotname(slot));
    373 		return 1;
    374 	}
    375 
    376 	return 0;
    377 }
    378 
    379 void
    380 txcom_disable(struct txcom_chip *chip)
    381 {
    382 	tx_chipset_tag_t tc;
    383 	txreg_t reg;
    384 	int slot;
    385 
    386 	tc = chip->sc_tc;
    387 	slot = chip->sc_slot;
    388 
    389 	reg = tx_conf_read(tc, TX39_UARTCTRL1_REG(slot));
    390 	/* DMA */
    391 	reg &= ~(TX39_UARTCTRL1_ENDMARX | TX39_UARTCTRL1_ENDMATX);
    392 
    393 	/* disable module */
    394 	reg &= ~TX39_UARTCTRL1_ENUART;
    395 	tx_conf_write(tc, TX39_UARTCTRL1_REG(slot), reg);
    396 
    397 	/* Clock */
    398 	reg = tx_conf_read(tc, TX39_CLOCKCTRL_REG);
    399 	reg &= ~(slot ? TX39_CLOCK_ENUARTBCLK : TX39_CLOCK_ENUARTACLK);
    400 	tx_conf_write(tc, TX39_CLOCKCTRL_REG, reg);
    401 
    402 }
    403 
    404 inline int
    405 __txcom_txbufready(struct txcom_chip *chip, int retry)
    406 {
    407 	tx_chipset_tag_t tc = chip->sc_tc;
    408 	int ofs = TX39_UARTCTRL1_REG(chip->sc_slot);
    409 
    410 	do {
    411 		if (tx_conf_read(tc, ofs) & TX39_UARTCTRL1_EMPTY)
    412 			return 1;
    413 	} while(--retry != 0);
    414 
    415 	return 0;
    416 }
    417 
    418 void
    419 txcom_pulse_mode(device_t dev)
    420 {
    421 	struct txcom_softc *sc = device_private(dev);
    422 	struct txcom_chip *chip = sc->sc_chip;
    423 	tx_chipset_tag_t tc = chip->sc_tc;
    424 	int ofs;
    425 	txreg_t reg;
    426 
    427 	ofs = TX39_UARTCTRL1_REG(chip->sc_slot);
    428 
    429 	reg = tx_conf_read(tc, ofs);
    430 	/* WindowsCE use this setting */
    431 	reg |= TX39_UARTCTRL1_PULSEOPT1;
    432 	reg &= ~TX39_UARTCTRL1_PULSEOPT2;
    433 	reg |= TX39_UARTCTRL1_DTINVERT;
    434 
    435 	tx_conf_write(tc, ofs, reg);
    436 }
    437 
    438 /*
    439  * console
    440  */
    441 int
    442 txcom_cngetc(dev_t dev)
    443 {
    444 	tx_chipset_tag_t tc;
    445 	int ofs, c, s;
    446 
    447 	s = spltty();
    448 
    449 	tc = txcom_chip.sc_tc;
    450 	ofs = TX39_UARTCTRL1_REG(txcom_chip.sc_slot);
    451 
    452 	while(!(TX39_UARTCTRL1_RXHOLDFULL & tx_conf_read(tc, ofs)))
    453 		;
    454 
    455 	c = TX39_UARTRXHOLD_RXDATA(
    456 		tx_conf_read(tc, TX39_UARTRXHOLD_REG(txcom_chip.sc_slot)));
    457 
    458 	if (c == '\r')
    459 		c = '\n';
    460 
    461 	splx(s);
    462 
    463 	return c;
    464 }
    465 
    466 void
    467 txcom_cnputc(dev_t dev, int c)
    468 {
    469 	struct txcom_chip *chip = &txcom_chip;
    470 	tx_chipset_tag_t tc = chip->sc_tc;
    471 	int s;
    472 
    473 	s = spltty();
    474 
    475 	/* Wait for transmitter to empty */
    476 	__txcom_txbufready(chip, -1);
    477 
    478 	tx_conf_write(tc, TX39_UARTTXHOLD_REG(chip->sc_slot),
    479 	    (c & TX39_UARTTXHOLD_TXDATA_MASK));
    480 
    481 	__txcom_txbufready(chip, -1);
    482 
    483 	splx(s);
    484 }
    485 
    486 void
    487 txcom_cnpollc(dev_t dev, int on)
    488 {
    489 }
    490 
    491 void
    492 txcom_setmode(struct txcom_chip *chip)
    493 {
    494 	tcflag_t cflag = chip->sc_cflag;
    495 	int ofs = TX39_UARTCTRL1_REG(chip->sc_slot);
    496 	txreg_t reg;
    497 
    498 	reg = tx_conf_read(chip->sc_tc, ofs);
    499 	reg &= ~TX39_UARTCTRL1_ENUART;
    500 	tx_conf_write(chip->sc_tc, ofs, reg);
    501 
    502 	switch (ISSET(cflag, CSIZE)) {
    503 	default:
    504 		printf("txcom_setmode: CS7, CS8 only. use CS7");
    505 		/* FALL THROUGH */
    506 	case CS7:
    507 		reg |= TX39_UARTCTRL1_BIT7;
    508 		break;
    509 	case CS8:
    510 		reg &= ~TX39_UARTCTRL1_BIT7;
    511 		break;
    512 	}
    513 
    514 	if (ISSET(cflag, PARENB)) {
    515 		reg |= TX39_UARTCTRL1_ENPARITY;
    516 		if (ISSET(cflag, PARODD)) {
    517 			reg &= ~TX39_UARTCTRL1_EVENPARITY;
    518 		} else {
    519 			reg |= TX39_UARTCTRL1_EVENPARITY;
    520 		}
    521 	} else {
    522 		reg &= ~TX39_UARTCTRL1_ENPARITY;
    523 	}
    524 
    525 	if (ISSET(cflag, CSTOPB))
    526 		reg |= TX39_UARTCTRL1_TWOSTOP;
    527 	else
    528 		reg &= ~TX39_UARTCTRL1_TWOSTOP;
    529 
    530 	reg |= TX39_UARTCTRL1_ENUART;
    531 	tx_conf_write(chip->sc_tc, ofs, reg);
    532 }
    533 
    534 void
    535 txcom_setbaudrate(struct txcom_chip *chip)
    536 {
    537 	int baudrate;
    538 	int ofs = TX39_UARTCTRL1_REG(chip->sc_slot);
    539 	txreg_t reg, reg1;
    540 
    541 	if (chip->sc_speed == 0)
    542 		return;
    543 
    544 	if (!cold)
    545 		DPRINTF("%d\n", chip->sc_speed);
    546 
    547 	reg1 = tx_conf_read(chip->sc_tc, ofs);
    548 	reg1 &= ~TX39_UARTCTRL1_ENUART;
    549 	tx_conf_write(chip->sc_tc, ofs, reg1);
    550 
    551 	baudrate = TX39_UARTCLOCKHZ / (chip->sc_speed * 16) - 1;
    552 	reg = TX39_UARTCTRL2_BAUDRATE_SET(0, baudrate);
    553 
    554 	tx_conf_write(chip->sc_tc, TX39_UARTCTRL2_REG(chip->sc_slot), reg);
    555 
    556 	reg1 |= TX39_UARTCTRL1_ENUART;
    557 	tx_conf_write(chip->sc_tc, ofs, reg1);
    558 }
    559 
    560 int
    561 txcom_cnattach(int slot, int speed, int cflag)
    562 {
    563 	cn_tab = &txcomcons;
    564 
    565 	txcom_chip.sc_tc	= tx_conf_get_tag();
    566 	txcom_chip.sc_slot	= slot;
    567 	txcom_chip.sc_cflag	= cflag;
    568 	txcom_chip.sc_speed	= speed;
    569 	txcom_chip.sc_hwflags |= TXCOM_HW_CONSOLE;
    570 #if notyet
    571 	txcom_reset(&txcom_chip);
    572 #endif
    573 	txcom_setmode(&txcom_chip);
    574 	txcom_setbaudrate(&txcom_chip);
    575 
    576 	if (txcom_enable(&txcom_chip, true) != 0)
    577 		return 1;
    578 
    579 	return 0;
    580 }
    581 
    582 /*
    583  * tty
    584  */
    585 void
    586 txcom_break(struct txcom_softc *sc, int on)
    587 {
    588 	struct txcom_chip *chip = sc->sc_chip;
    589 
    590 	tx_conf_write(chip->sc_tc, TX39_UARTTXHOLD_REG(chip->sc_slot),
    591 	    on ? TX39_UARTTXHOLD_BREAK : 0);
    592 }
    593 
    594 void
    595 txcom_modem(struct txcom_softc *sc, int on)
    596 {
    597 	struct txcom_chip *chip = sc->sc_chip;
    598 	tx_chipset_tag_t tc = chip->sc_tc;
    599 	int slot = chip->sc_slot;
    600 	txreg_t reg;
    601 
    602 	/* assert DTR */
    603 	if (IS_COM0(slot)) {
    604 		config_hook_call(CONFIG_HOOK_SET,
    605 		    CONFIG_HOOK_COM0_DTR,
    606 		    (void *)on);
    607 	}
    608 
    609 	reg = tx_conf_read(tc, TX39_UARTCTRL1_REG(slot));
    610 	reg &= ~TX39_UARTCTRL1_ENUART;
    611 	tx_conf_write(tc, TX39_UARTCTRL1_REG(slot), reg);
    612 
    613 	if (on) {
    614 		reg &= ~TX39_UARTCTRL1_DISTXD;
    615 	} else {
    616 		reg |= TX39_UARTCTRL1_DISTXD; /* low UARTTXD */
    617 	}
    618 
    619 	reg |= TX39_UARTCTRL1_ENUART;
    620 	tx_conf_write(tc, TX39_UARTCTRL1_REG(slot), reg);
    621 }
    622 
    623 void
    624 txcom_shutdown(struct txcom_softc *sc)
    625 {
    626 	struct tty *tp = sc->sc_tty;
    627 	int s = spltty();
    628 
    629 	/* Clear any break condition set with TIOCSBRK. */
    630 	txcom_break(sc, 0);
    631 
    632 	/*
    633 	 * Hang up if necessary.  Wait a bit, so the other side has time to
    634 	 * notice even if we immediately open the port again.
    635 	 */
    636 	if (ISSET(tp->t_cflag, HUPCL)) {
    637 		txcom_modem(sc, 0);
    638 		(void) tsleep(sc, TTIPRI, ttclos, hz);
    639 	}
    640 
    641 
    642 	/* Turn off interrupts if not the console. */
    643 	if (!ISSET(sc->sc_chip->sc_hwflags, TXCOM_HW_CONSOLE)) {
    644 		txcom_disable(sc->sc_chip);
    645 	}
    646 
    647 	splx(s);
    648 }
    649 
    650 const char *
    651 __txcom_slotname(int slot)
    652 {
    653 	static const char *slotname[] = {"UARTA", "UARTB", "unknown"};
    654 
    655 	if (slot != 0 && slot != 1)
    656 		return slotname[2];
    657 
    658 	return slotname[slot];
    659 }
    660 
    661 int
    662 txcom_frameerr_intr(void *arg)
    663 {
    664 	struct txcom_softc *sc = arg;
    665 
    666 	printf("%s frame error\n", __txcom_slotname(sc->sc_chip->sc_slot));
    667 
    668 	return 0;
    669 }
    670 
    671 int
    672 txcom_parityerr_intr(void *arg)
    673 {
    674 	struct txcom_softc *sc = arg;
    675 
    676 	printf("%s parity error\n", __txcom_slotname(sc->sc_chip->sc_slot));
    677 
    678 	return 0;
    679 }
    680 
    681 int
    682 txcom_break_intr(void *arg)
    683 {
    684 	struct txcom_softc *sc = arg;
    685 
    686 	printf("%s break\n", __txcom_slotname(sc->sc_chip->sc_slot));
    687 
    688 	return 0;
    689 }
    690 
    691 int
    692 txcom_rxintr(void *arg)
    693 {
    694 	struct txcom_softc *sc = arg;
    695 	struct txcom_chip *chip = sc->sc_chip;
    696 	u_int8_t c;
    697 
    698 	c = TX39_UARTRXHOLD_RXDATA(
    699 		tx_conf_read(chip->sc_tc,
    700 		    TX39_UARTRXHOLD_REG(chip->sc_slot)));
    701 
    702 	sc->sc_rbuf[sc->sc_rbput] = c;
    703 	sc->sc_rbput = (sc->sc_rbput + 1) % TXCOM_RING_MASK;
    704 
    705 	softint_schedule(sc->sc_rxsoft_cookie);
    706 
    707 	return 0;
    708 }
    709 
    710 void
    711 txcom_rxsoft(void *arg)
    712 {
    713 	struct txcom_softc *sc = arg;
    714 	struct tty *tp = sc->sc_tty;
    715 	int (*rint)(int, struct tty *);
    716 	int code;
    717 	int s, end, get;
    718 
    719 	rint = tp->t_linesw->l_rint;
    720 
    721 	s = spltty();
    722 	end = sc->sc_rbput;
    723 	get = sc->sc_rbget;
    724 
    725 	while (get != end) {
    726 		code = sc->sc_rbuf[get];
    727 
    728 		if ((*rint)(code, tp) == -1) {
    729 			/*
    730 			 * The line discipline's buffer is out of space.
    731 			 */
    732 		}
    733 		get = (get + 1) % TXCOM_RING_MASK;
    734 	}
    735 	sc->sc_rbget = get;
    736 
    737 	splx(s);
    738 }
    739 
    740 int
    741 txcom_txintr(void *arg)
    742 {
    743 	struct txcom_softc *sc = arg;
    744 	struct txcom_chip *chip = sc->sc_chip;
    745 	tx_chipset_tag_t tc = chip->sc_tc;
    746 
    747 	if (sc->sc_tbc > 0) {
    748 		tx_conf_write(tc, TX39_UARTTXHOLD_REG(chip->sc_slot),
    749 		    (*sc->sc_tba &
    750 			TX39_UARTTXHOLD_TXDATA_MASK));
    751 		sc->sc_tbc--;
    752 		sc->sc_tba++;
    753 	} else {
    754 		softint_schedule(sc->sc_txsoft_cookie);
    755 	}
    756 
    757 	return 0;
    758 }
    759 
    760 void
    761 txcom_txsoft(void *arg)
    762 {
    763 	struct txcom_softc *sc = arg;
    764 	struct tty *tp = sc->sc_tty;
    765 	int s = spltty();
    766 
    767 	CLR(tp->t_state, TS_BUSY);
    768 	if (ISSET(tp->t_state, TS_FLUSH)) {
    769 		CLR(tp->t_state, TS_FLUSH);
    770 	} else {
    771 		ndflush(&tp->t_outq, (int)(sc->sc_tba - tp->t_outq.c_cf));
    772 	}
    773 
    774 	(*tp->t_linesw->l_start)(tp);
    775 
    776 	splx(s);
    777 }
    778 
    779 int
    780 txcomopen(dev_t dev, int flag, int mode, struct lwp *l)
    781 {
    782 	struct txcom_softc *sc;
    783 	struct txcom_chip *chip;
    784 	struct tty *tp;
    785 	int s, err = ENXIO;
    786 
    787 	sc = device_lookup_private(&txcom_cd, minor(dev));
    788 	if (sc == NULL)
    789 		return err;
    790 
    791 	chip = sc->sc_chip;
    792 	tp = sc->sc_tty;
    793 
    794 	if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp))
    795 		return (EBUSY);
    796 
    797 	s = spltty();
    798 
    799 	if (txcom_enable(sc->sc_chip, false)) {
    800 		splx(s);
    801 		goto out;
    802 	}
    803 	/*
    804 	 * Do the following iff this is a first open.
    805 	 */
    806 	if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
    807 		struct termios t;
    808 
    809 		tp->t_dev = dev;
    810 
    811 		t.c_ispeed = 0;
    812 		if (ISSET(chip->sc_hwflags, TXCOM_HW_CONSOLE)) {
    813 			t.c_ospeed = chip->sc_speed;
    814 			t.c_cflag = chip->sc_cflag;
    815 		} else {
    816 			t.c_ospeed = TTYDEF_SPEED;
    817 			t.c_cflag = TTYDEF_CFLAG;
    818 		}
    819 
    820 		if (ISSET(chip->sc_swflags, TIOCFLAG_CLOCAL))
    821 			SET(t.c_cflag, CLOCAL);
    822 		if (ISSET(chip->sc_swflags, TIOCFLAG_CRTSCTS))
    823 			SET(t.c_cflag, CRTSCTS);
    824 		if (ISSET(chip->sc_swflags, TIOCFLAG_MDMBUF))
    825 			SET(t.c_cflag, MDMBUF);
    826 
    827 		/* Make sure txcomparam() will do something. */
    828 		tp->t_ospeed = 0;
    829 		txcomparam(tp, &t);
    830 
    831 		tp->t_iflag = TTYDEF_IFLAG;
    832 		tp->t_oflag = TTYDEF_OFLAG;
    833 		tp->t_lflag = TTYDEF_LFLAG;
    834 
    835 		ttychars(tp);
    836 		ttsetwater(tp);
    837 
    838 		/*
    839 		 * Turn on DTR.  We must always do this, even if carrier is not
    840 		 * present, because otherwise we'd have to use TIOCSDTR
    841 		 * immediately after setting CLOCAL, which applications do not
    842 		 * expect.  We always assert DTR while the device is open
    843 		 * unless explicitly requested to deassert it.
    844 		 */
    845 		txcom_modem(sc, 1);
    846 
    847 		/* Clear the input ring, and unblock. */
    848 		sc->sc_rbget = sc->sc_rbput = 0;
    849 	}
    850 
    851 	splx(s);
    852 #define	TXCOMDIALOUT(x)	TTDIALOUT(x)
    853 	if ((err = ttyopen(tp, TXCOMDIALOUT(dev), ISSET(flag, O_NONBLOCK)))) {
    854 		DPRINTF("ttyopen failed\n");
    855 		goto out;
    856 	}
    857 	if ((err = (*tp->t_linesw->l_open)(dev, tp))) {
    858 		DPRINTF("line discipline open failed\n");
    859 		goto out;
    860 	}
    861 
    862 	return err;
    863 
    864  out:
    865 	if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
    866 		/*
    867 		 * We failed to open the device, and nobody else had it opened.
    868 		 * Clean up the state as appropriate.
    869 		 */
    870 		txcom_shutdown(sc);
    871 	}
    872 
    873 	return err;
    874 
    875 }
    876 
    877 int
    878 txcomclose(dev_t dev, int flag, int mode, struct lwp *l)
    879 {
    880 	struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev));
    881 	struct tty *tp = sc->sc_tty;
    882 
    883 	/* XXX This is for cons.c. */
    884 	if (!ISSET(tp->t_state, TS_ISOPEN))
    885 		return 0;
    886 
    887 	(*tp->t_linesw->l_close)(tp, flag);
    888 	ttyclose(tp);
    889 
    890 	if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
    891 		/*
    892 		 * Although we got a last close, the device may still be in
    893 		 * use; e.g. if this was the dialout node, and there are still
    894 		 * processes waiting for carrier on the non-dialout node.
    895 		 */
    896 		txcom_shutdown(sc);
    897 	}
    898 
    899 	return 0;
    900 }
    901 
    902 int
    903 txcomread(dev_t dev, struct uio *uio, int flag)
    904 {
    905 	struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev));
    906 	struct tty *tp = sc->sc_tty;
    907 
    908 	return ((*tp->t_linesw->l_read)(tp, uio, flag));
    909 }
    910 
    911 int
    912 txcomwrite(dev_t dev, struct uio *uio, int flag)
    913 {
    914 	struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev));
    915 	struct tty *tp = sc->sc_tty;
    916 
    917 	return ((*tp->t_linesw->l_write)(tp, uio, flag));
    918 }
    919 
    920 int
    921 txcompoll(dev_t dev, int events, struct lwp *l)
    922 {
    923 	struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev));
    924 	struct tty *tp = sc->sc_tty;
    925 
    926 	return ((*tp->t_linesw->l_poll)(tp, events, l));
    927 }
    928 
    929 struct tty *
    930 txcomtty(dev_t dev)
    931 {
    932 	struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev));
    933 
    934 	return sc->sc_tty;
    935 }
    936 
    937 int
    938 txcomioctl(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l)
    939 {
    940 	struct txcom_softc *sc = device_lookup_private(&txcom_cd, minor(dev));
    941 	struct tty *tp = sc->sc_tty;
    942 	int s, err;
    943 
    944 	err = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, l);
    945 	if (err != EPASSTHROUGH) {
    946 		return err;
    947 	}
    948 
    949 	err = ttioctl(tp, cmd, data, flag, l);
    950 	if (err != EPASSTHROUGH) {
    951 		return err;
    952 	}
    953 
    954 	err = 0;
    955 
    956 	s = spltty();
    957 
    958 	switch (cmd) {
    959 	default:
    960 		err = EPASSTHROUGH;
    961 		break;
    962 
    963 	case TIOCSBRK:
    964 		txcom_break(sc, 1);
    965 		break;
    966 
    967 	case TIOCCBRK:
    968 		txcom_break(sc, 0);
    969 		break;
    970 
    971 	case TIOCSDTR:
    972 		txcom_modem(sc, 1);
    973 		break;
    974 
    975 	case TIOCCDTR:
    976 		txcom_modem(sc, 0);
    977 		break;
    978 
    979 	case TIOCGFLAGS:
    980 		*(int *)data = sc->sc_chip->sc_swflags;
    981 		break;
    982 
    983 	case TIOCSFLAGS:
    984 		err = kauth_authorize_device_tty(l->l_cred,
    985 		    KAUTH_DEVICE_TTY_PRIVSET, tp);
    986 		if (err) {
    987 			break;
    988 		}
    989 		sc->sc_chip->sc_swflags = *(int *)data;
    990 		break;
    991 
    992 	}
    993 
    994 	splx(s);
    995 
    996 	return err;
    997 }
    998 
    999 void
   1000 txcomstop(struct tty *tp, int flag)
   1001 {
   1002 	struct txcom_softc *sc;
   1003 	int s;
   1004 
   1005 	sc = device_lookup_private(&txcom_cd, minor(tp->t_dev));
   1006 
   1007 	s = spltty();
   1008 
   1009 	if (ISSET(tp->t_state, TS_BUSY)) {
   1010 		/* Stop transmitting at the next chunk. */
   1011 		sc->sc_tbc = 0;
   1012 		sc->sc_heldtbc = 0;
   1013 		if (!ISSET(tp->t_state, TS_TTSTOP))
   1014 			SET(tp->t_state, TS_FLUSH);
   1015 	}
   1016 
   1017 	splx(s);
   1018 }
   1019 
   1020 void
   1021 txcomstart(struct tty *tp)
   1022 {
   1023 	struct txcom_softc *sc;
   1024 	struct txcom_chip *chip;
   1025 	tx_chipset_tag_t tc;
   1026 	int slot;
   1027 	int s;
   1028 
   1029 	sc = device_lookup_private(&txcom_cd, minor(tp->t_dev));
   1030 	chip = sc->sc_chip;
   1031 	tc = chip->sc_tc;
   1032 	slot = chip->sc_slot;
   1033 
   1034 	s = spltty();
   1035 
   1036 	if (!__txcom_txbufready(chip, 0) ||
   1037 	    ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP))
   1038 		goto out;
   1039 
   1040 	if (!ttypull(tp))
   1041 		goto out;
   1042 
   1043 	sc->sc_tba = tp->t_outq.c_cf;
   1044 	sc->sc_tbc = ndqb(&tp->t_outq, 0);
   1045 	SET(tp->t_state, TS_BUSY);
   1046 
   1047 	/* Output the first character of the contiguous buffer. */
   1048 	tx_conf_write(tc, TX39_UARTTXHOLD_REG(slot),
   1049 	    (*sc->sc_tba & TX39_UARTTXHOLD_TXDATA_MASK));
   1050 
   1051 	sc->sc_tbc--;
   1052 	sc->sc_tba++;
   1053 
   1054  out:
   1055 	splx(s);
   1056 }
   1057 
   1058 /*
   1059  * Set TXcom tty parameters from termios.
   1060  */
   1061 int
   1062 txcomparam(struct tty *tp, struct termios *t)
   1063 {
   1064 	struct txcom_softc *sc;
   1065 	struct txcom_chip *chip;
   1066 	int ospeed;
   1067 	int s;
   1068 
   1069 	sc = device_lookup_private(&txcom_cd, minor(tp->t_dev));
   1070 	if (sc == NULL)
   1071 		return ENXIO;
   1072 
   1073 	ospeed = t->c_ospeed;
   1074 
   1075 	/* Check requested parameters. */
   1076 	if (ospeed < 0) {
   1077 		return EINVAL;
   1078 	}
   1079 	if (t->c_ispeed && t->c_ispeed != ospeed) {
   1080 		return EINVAL;
   1081 	}
   1082 
   1083 	s = spltty();
   1084 	chip = sc->sc_chip;
   1085 	/*
   1086 	 * For the console, always force CLOCAL and !HUPCL, so that the port
   1087 	 * is always active.
   1088 	 */
   1089 	if (ISSET(chip->sc_swflags, TIOCFLAG_SOFTCAR) ||
   1090 	    ISSET(chip->sc_hwflags, TXCOM_HW_CONSOLE)) {
   1091 		SET(t->c_cflag, CLOCAL);
   1092 		CLR(t->c_cflag, HUPCL);
   1093 	}
   1094 	splx(s);
   1095 
   1096 	/*
   1097 	 * If we're not in a mode that assumes a connection is present, then
   1098 	 * ignore carrier changes.
   1099 	 */
   1100 	if (ISSET(t->c_cflag, CLOCAL | MDMBUF))
   1101 		chip->sc_dcd = 0;
   1102 	else
   1103 		chip->sc_dcd = 1;
   1104 
   1105 	/*
   1106 	 * Only whack the UART when params change.
   1107 	 * Some callers need to clear tp->t_ospeed
   1108 	 * to make sure initialization gets done.
   1109 	 */
   1110 	if (tp->t_ospeed == ospeed && tp->t_cflag == t->c_cflag) {
   1111 		return 0;
   1112 	}
   1113 
   1114 	s = spltty();
   1115 	chip = sc->sc_chip;
   1116 	chip->sc_speed = ospeed;
   1117 	chip->sc_cflag = t->c_cflag;
   1118 
   1119 	txcom_setmode(chip);
   1120 	txcom_setbaudrate(chip);
   1121 
   1122 	/* And copy to tty. */
   1123 	tp->t_ispeed = 0;
   1124 	tp->t_ospeed = chip->sc_speed;
   1125 	tp->t_cflag = chip->sc_cflag;
   1126 
   1127 	/*
   1128 	 * Update the tty layer's idea of the carrier bit, in case we changed
   1129 	 * CLOCAL or MDMBUF.  We don't hang up here; we only do that by
   1130 	 * explicit request.
   1131 	 */
   1132 	(void) (*tp->t_linesw->l_modem)(tp, chip->sc_dcd);
   1133 
   1134 	/*
   1135 	 * If hardware flow control is disabled, unblock any hard flow
   1136 	 * control state.
   1137 	 */
   1138 	if (!ISSET(chip->sc_cflag, CHWFLOW)) {
   1139 		txcomstart(tp);
   1140 	}
   1141 
   1142 	splx(s);
   1143 
   1144 	return 0;
   1145 }
   1146 
   1147 int
   1148 txcom_dcd_hook(void *arg, int type, long id, void *msg)
   1149 {
   1150 	struct txcom_softc *sc = arg;
   1151 	struct tty *tp = sc->sc_tty;
   1152 	struct txcom_chip *chip = sc->sc_chip;
   1153 	int modem = !(int)msg; /* p-edge 1, n-edge 0 */
   1154 
   1155 	DPRINTF("DCD %s\n", modem ? "ON" : "OFF");
   1156 
   1157 	if (modem && chip->sc_dcd)
   1158 		(void) (*tp->t_linesw->l_modem)(tp, chip->sc_dcd);
   1159 
   1160 	return 0;
   1161 }
   1162 
   1163 int
   1164 txcom_cts_hook(void *arg, int type, long id, void *msg)
   1165 {
   1166 	struct txcom_softc *sc = arg;
   1167 	struct tty *tp = sc->sc_tty;
   1168 	struct txcom_chip *chip = sc->sc_chip;
   1169 	int clear = !(int)msg; /* p-edge 1, n-edge 0 */
   1170 
   1171 	DPRINTF("CTS %s\n", clear ? "ON"  : "OFF");
   1172 
   1173 	if (chip->sc_msr_cts) {
   1174 		if (!clear) {
   1175 			chip->sc_tx_stopped = 1;
   1176 		} else {
   1177 			chip->sc_tx_stopped = 0;
   1178 			(*tp->t_linesw->l_start)(tp);
   1179 		}
   1180 	}
   1181 
   1182 	return 0;
   1183 }
   1184 
   1185 #ifdef TX39UARTDEBUG
   1186 void
   1187 txcom_dump(struct txcom_chip *chip)
   1188 {
   1189 	tx_chipset_tag_t tc = chip->sc_tc;
   1190 	int slot = chip->sc_slot;
   1191 	txreg_t reg;
   1192 
   1193 	reg = tx_conf_read(tc, TX39_UARTCTRL1_REG(slot));
   1194 #define ISSETPRINT(r, m) \
   1195 	dbg_bitmask_print(r, TX39_UARTCTRL1_##m, #m)
   1196 	ISSETPRINT(reg, UARTON);
   1197 	ISSETPRINT(reg, EMPTY);
   1198 	ISSETPRINT(reg, PRXHOLDFULL);
   1199 	ISSETPRINT(reg, RXHOLDFULL);
   1200 	ISSETPRINT(reg, ENDMARX);
   1201 	ISSETPRINT(reg, ENDMATX);
   1202 	ISSETPRINT(reg, TESTMODE);
   1203 	ISSETPRINT(reg, ENBREAHALT);
   1204 	ISSETPRINT(reg, ENDMATEST);
   1205 	ISSETPRINT(reg, ENDMALOOP);
   1206 	ISSETPRINT(reg, PULSEOPT2);
   1207 	ISSETPRINT(reg, PULSEOPT1);
   1208 	ISSETPRINT(reg, DTINVERT);
   1209 	ISSETPRINT(reg, DISTXD);
   1210 	ISSETPRINT(reg, TWOSTOP);
   1211 	ISSETPRINT(reg, LOOPBACK);
   1212 	ISSETPRINT(reg, BIT7);
   1213 	ISSETPRINT(reg, EVENPARITY);
   1214 	ISSETPRINT(reg, ENPARITY);
   1215 	ISSETPRINT(reg, ENUART);
   1216 }
   1217 #endif /* TX39UARTDEBUG */
   1218