Home | History | Annotate | Line # | Download | only in usb
      1 /*	$OpenBSD: if_zyd.c,v 1.52 2007/02/11 00:08:04 jsg Exp $	*/
      2 /*	$NetBSD: if_zyd.c,v 1.61 2024/02/09 22:08:37 andvar Exp $	*/
      3 
      4 /*-
      5  * Copyright (c) 2006 by Damien Bergamini <damien.bergamini (at) free.fr>
      6  * Copyright (c) 2006 by Florian Stoehr <ich (at) florian-stoehr.de>
      7  *
      8  * Permission to use, copy, modify, and distribute this software for any
      9  * purpose with or without fee is hereby granted, provided that the above
     10  * copyright notice and this permission notice appear in all copies.
     11  *
     12  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
     13  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
     14  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
     15  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
     16  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
     17  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
     18  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
     19  */
     20 
     21 /*-
     22  * ZyDAS ZD1211/ZD1211B USB WLAN driver.
     23  */
     24 
     25 #include <sys/cdefs.h>
     26 __KERNEL_RCSID(0, "$NetBSD: if_zyd.c,v 1.61 2024/02/09 22:08:37 andvar Exp $");
     27 
     28 #ifdef _KERNEL_OPT
     29 #include "opt_usb.h"
     30 #endif
     31 
     32 #include <sys/param.h>
     33 #include <sys/sockio.h>
     34 #include <sys/proc.h>
     35 #include <sys/mbuf.h>
     36 #include <sys/kernel.h>
     37 #include <sys/kmem.h>
     38 #include <sys/socket.h>
     39 #include <sys/systm.h>
     40 #include <sys/malloc.h>
     41 #include <sys/conf.h>
     42 #include <sys/device.h>
     43 
     44 #include <sys/bus.h>
     45 #include <machine/endian.h>
     46 
     47 #include <net/bpf.h>
     48 #include <net/if.h>
     49 #include <net/if_arp.h>
     50 #include <net/if_dl.h>
     51 #include <net/if_ether.h>
     52 #include <net/if_media.h>
     53 #include <net/if_types.h>
     54 
     55 #include <netinet/in.h>
     56 #include <netinet/in_systm.h>
     57 #include <netinet/in_var.h>
     58 #include <netinet/ip.h>
     59 
     60 #include <net80211/ieee80211_netbsd.h>
     61 #include <net80211/ieee80211_var.h>
     62 #include <net80211/ieee80211_amrr.h>
     63 #include <net80211/ieee80211_radiotap.h>
     64 
     65 #include <dev/firmload.h>
     66 
     67 #include <dev/usb/usb.h>
     68 #include <dev/usb/usbdi.h>
     69 #include <dev/usb/usbdi_util.h>
     70 #include <dev/usb/usbdevs.h>
     71 
     72 #include <dev/usb/if_zydreg.h>
     73 
     74 #ifdef ZYD_DEBUG
     75 #define DPRINTF(x)	do { if (zyddebug > 0) printf x; } while (0)
     76 #define DPRINTFN(n, x)	do { if (zyddebug > (n)) printf x; } while (0)
     77 int zyddebug = 0;
     78 #else
     79 #define DPRINTF(x)
     80 #define DPRINTFN(n, x)
     81 #endif
     82 
     83 static const struct zyd_phy_pair zyd_def_phy[] = ZYD_DEF_PHY;
     84 static const struct zyd_phy_pair zyd_def_phyB[] = ZYD_DEF_PHYB;
     85 
     86 /* various supported device vendors/products */
     87 #define ZYD_ZD1211_DEV(v, p)	\
     88 	{ { USB_VENDOR_##v, USB_PRODUCT_##v##_##p }, ZYD_ZD1211 }
     89 #define ZYD_ZD1211B_DEV(v, p)	\
     90 	{ { USB_VENDOR_##v, USB_PRODUCT_##v##_##p }, ZYD_ZD1211B }
     91 static const struct zyd_type {
     92 	struct usb_devno	dev;
     93 	uint8_t			rev;
     94 #define ZYD_ZD1211	0
     95 #define ZYD_ZD1211B	1
     96 } zyd_devs[] = {
     97 	ZYD_ZD1211_DEV(3COM2,		3CRUSB10075),
     98 	ZYD_ZD1211_DEV(ABOCOM,		WL54),
     99 	ZYD_ZD1211_DEV(ASUSTEK,		WL159G),
    100 	ZYD_ZD1211_DEV(CYBERTAN,	TG54USB),
    101 	ZYD_ZD1211_DEV(DRAYTEK,		VIGOR550),
    102 	ZYD_ZD1211_DEV(PLANEX2,		GWUS54GD),
    103 	ZYD_ZD1211_DEV(PLANEX2,		GWUS54GZL),
    104 	ZYD_ZD1211_DEV(PLANEX3,		GWUS54GZ),
    105 	ZYD_ZD1211_DEV(PLANEX3,		GWUS54MINI),
    106 	ZYD_ZD1211_DEV(SAGEM,		XG760A),
    107 	ZYD_ZD1211_DEV(SENAO,		NUB8301),
    108 	ZYD_ZD1211_DEV(SITECOMEU,	WL113),
    109 	ZYD_ZD1211_DEV(SWEEX,		ZD1211),
    110 	ZYD_ZD1211_DEV(TEKRAM,		QUICKWLAN),
    111 	ZYD_ZD1211_DEV(TEKRAM,		ZD1211_1),
    112 	ZYD_ZD1211_DEV(TEKRAM,		ZD1211_2),
    113 	ZYD_ZD1211_DEV(TWINMOS,		G240),
    114 	ZYD_ZD1211_DEV(UMEDIA,		ALL0298V2),
    115 	ZYD_ZD1211_DEV(UMEDIA,		TEW429UB_A),
    116 	ZYD_ZD1211_DEV(UMEDIA,		TEW429UB),
    117 	ZYD_ZD1211_DEV(WISTRONNEWEB,	UR055G),
    118 	ZYD_ZD1211_DEV(ZCOM,		ZD1211),
    119 	ZYD_ZD1211_DEV(ZYDAS,		ZD1211),
    120 	ZYD_ZD1211_DEV(ZYXEL,		AG225H),
    121 	ZYD_ZD1211_DEV(ZYXEL,		ZYAIRG220),
    122 	ZYD_ZD1211_DEV(ZYXEL,		G200V2),
    123 
    124 	ZYD_ZD1211B_DEV(ACCTON,		SMCWUSBG),
    125 	ZYD_ZD1211B_DEV(ACCTON,		WN4501H_LF_IR),
    126 	ZYD_ZD1211B_DEV(ACCTON,		WUS201),
    127 	ZYD_ZD1211B_DEV(ACCTON,		ZD1211B),
    128 	ZYD_ZD1211B_DEV(ASUSTEK,	A9T_WIFI),
    129 	ZYD_ZD1211B_DEV(BELKIN,		F5D7050C),
    130 	ZYD_ZD1211B_DEV(BELKIN,		ZD1211B),
    131 	ZYD_ZD1211B_DEV(BEWAN,		BWIFI_USB54AR),
    132 	ZYD_ZD1211B_DEV(CISCOLINKSYS,	WUSBF54G),
    133 	ZYD_ZD1211B_DEV(CYBERTAN,	ZD1211B),
    134 	ZYD_ZD1211B_DEV(FIBERLINE,	WL430U),
    135 	ZYD_ZD1211B_DEV(MELCO,		KG54L),
    136 	ZYD_ZD1211B_DEV(PHILIPS,	SNU5600),
    137 	ZYD_ZD1211B_DEV(PHILIPS,	SNU5630NS05),
    138 	ZYD_ZD1211B_DEV(PLANEX2,	GWUS54GXS),
    139 	ZYD_ZD1211B_DEV(SAGEM,		XG76NA),
    140 	ZYD_ZD1211B_DEV(SITECOMEU,	WL603),
    141 	ZYD_ZD1211B_DEV(SITECOMEU,	ZD1211B),
    142 	ZYD_ZD1211B_DEV(SONY,		IFU_WLM2),
    143 	ZYD_ZD1211B_DEV(UMEDIA,		TEW429UBC1),
    144 	ZYD_ZD1211B_DEV(UNKNOWN1,	ZD1211B),
    145 	ZYD_ZD1211B_DEV(UNKNOWN2,	ZD1211B),
    146 	ZYD_ZD1211B_DEV(UNKNOWN3,	ZD1211B),
    147 	ZYD_ZD1211B_DEV(USR,		USR5423),
    148 	ZYD_ZD1211B_DEV(VTECH,		ZD1211B),
    149 	ZYD_ZD1211B_DEV(ZCOM,		ZD1211B),
    150 	ZYD_ZD1211B_DEV(ZYDAS,		ZD1211B),
    151 	ZYD_ZD1211B_DEV(ZYDAS,		ZD1211B_2),
    152 	ZYD_ZD1211B_DEV(ZYXEL,		M202),
    153 	ZYD_ZD1211B_DEV(ZYXEL,		G220V2),
    154 };
    155 #define zyd_lookup(v, p)	\
    156 	((const struct zyd_type *)usb_lookup(zyd_devs, v, p))
    157 
    158 static int zyd_match(device_t, cfdata_t, void *);
    159 static void zyd_attach(device_t, device_t, void *);
    160 static int zyd_detach(device_t, int);
    161 static int zyd_activate(device_t, enum devact);
    162 
    163 
    164 CFATTACH_DECL_NEW(zyd, sizeof(struct zyd_softc), zyd_match,
    165     zyd_attach, zyd_detach, zyd_activate);
    166 
    167 Static void	zyd_attachhook(device_t);
    168 Static int	zyd_complete_attach(struct zyd_softc *);
    169 Static int	zyd_open_pipes(struct zyd_softc *);
    170 Static void	zyd_close_pipes(struct zyd_softc *);
    171 Static int	zyd_alloc_tx_list(struct zyd_softc *);
    172 Static void	zyd_free_tx_list(struct zyd_softc *);
    173 Static int	zyd_alloc_rx_list(struct zyd_softc *);
    174 Static void	zyd_free_rx_list(struct zyd_softc *);
    175 Static struct	ieee80211_node *zyd_node_alloc(struct ieee80211_node_table *);
    176 Static int	zyd_media_change(struct ifnet *);
    177 Static void	zyd_next_scan(void *);
    178 Static void	zyd_task(void *);
    179 Static int	zyd_newstate(struct ieee80211com *, enum ieee80211_state, int);
    180 Static int	zyd_cmd(struct zyd_softc *, uint16_t, const void *, int,
    181 		    void *, int, u_int);
    182 Static int	zyd_read16(struct zyd_softc *, uint16_t, uint16_t *);
    183 Static int	zyd_read32(struct zyd_softc *, uint16_t, uint32_t *);
    184 Static int	zyd_write16(struct zyd_softc *, uint16_t, uint16_t);
    185 Static int	zyd_write32(struct zyd_softc *, uint16_t, uint32_t);
    186 Static int	zyd_rfwrite(struct zyd_softc *, uint32_t);
    187 Static void	zyd_lock_phy(struct zyd_softc *);
    188 Static void	zyd_unlock_phy(struct zyd_softc *);
    189 Static int	zyd_rfmd_init(struct zyd_rf *);
    190 Static int	zyd_rfmd_switch_radio(struct zyd_rf *, int);
    191 Static int	zyd_rfmd_set_channel(struct zyd_rf *, uint8_t);
    192 Static int	zyd_al2230_init(struct zyd_rf *);
    193 Static int	zyd_al2230_switch_radio(struct zyd_rf *, int);
    194 Static int	zyd_al2230_set_channel(struct zyd_rf *, uint8_t);
    195 Static int	zyd_al2230_init_b(struct zyd_rf *);
    196 Static int	zyd_al7230B_init(struct zyd_rf *);
    197 Static int	zyd_al7230B_switch_radio(struct zyd_rf *, int);
    198 Static int	zyd_al7230B_set_channel(struct zyd_rf *, uint8_t);
    199 Static int	zyd_al2210_init(struct zyd_rf *);
    200 Static int	zyd_al2210_switch_radio(struct zyd_rf *, int);
    201 Static int	zyd_al2210_set_channel(struct zyd_rf *, uint8_t);
    202 Static int	zyd_gct_init(struct zyd_rf *);
    203 Static int	zyd_gct_switch_radio(struct zyd_rf *, int);
    204 Static int	zyd_gct_set_channel(struct zyd_rf *, uint8_t);
    205 Static int	zyd_maxim_init(struct zyd_rf *);
    206 Static int	zyd_maxim_switch_radio(struct zyd_rf *, int);
    207 Static int	zyd_maxim_set_channel(struct zyd_rf *, uint8_t);
    208 Static int	zyd_maxim2_init(struct zyd_rf *);
    209 Static int	zyd_maxim2_switch_radio(struct zyd_rf *, int);
    210 Static int	zyd_maxim2_set_channel(struct zyd_rf *, uint8_t);
    211 Static int	zyd_rf_attach(struct zyd_softc *, uint8_t);
    212 Static const char *zyd_rf_name(uint8_t);
    213 Static int	zyd_hw_init(struct zyd_softc *);
    214 Static int	zyd_read_eeprom(struct zyd_softc *);
    215 Static int	zyd_set_macaddr(struct zyd_softc *, const uint8_t *);
    216 Static int	zyd_set_bssid(struct zyd_softc *, const uint8_t *);
    217 Static int	zyd_switch_radio(struct zyd_softc *, int);
    218 Static void	zyd_set_led(struct zyd_softc *, int, int);
    219 Static int	zyd_set_rxfilter(struct zyd_softc *);
    220 Static void	zyd_set_chan(struct zyd_softc *, struct ieee80211_channel *);
    221 Static int	zyd_set_beacon_interval(struct zyd_softc *, int);
    222 Static uint8_t	zyd_plcp_signal(int);
    223 Static void	zyd_intr(struct usbd_xfer *, void *, usbd_status);
    224 Static void	zyd_rx_data(struct zyd_softc *, const uint8_t *, uint16_t);
    225 Static void	zyd_rxeof(struct usbd_xfer *, void *, usbd_status);
    226 Static void	zyd_txeof(struct usbd_xfer *, void *, usbd_status);
    227 Static int	zyd_tx_mgt(struct zyd_softc *, struct mbuf *,
    228 		    struct ieee80211_node *);
    229 Static int	zyd_tx_data(struct zyd_softc *, struct mbuf *,
    230 		    struct ieee80211_node *);
    231 Static void	zyd_start(struct ifnet *);
    232 Static void	zyd_watchdog(struct ifnet *);
    233 Static int	zyd_ioctl(struct ifnet *, u_long, void *);
    234 Static int	zyd_init(struct ifnet *);
    235 Static void	zyd_stop(struct ifnet *, int);
    236 Static int	zyd_loadfirmware(struct zyd_softc *, u_char *, size_t);
    237 Static void	zyd_iter_func(void *, struct ieee80211_node *);
    238 Static void	zyd_amrr_timeout(void *);
    239 Static void	zyd_newassoc(struct ieee80211_node *, int);
    240 
    241 static int
    242 zyd_match(device_t parent, cfdata_t match, void *aux)
    243 {
    244 	struct usb_attach_arg *uaa = aux;
    245 
    246 	return (zyd_lookup(uaa->uaa_vendor, uaa->uaa_product) != NULL) ?
    247 	    UMATCH_VENDOR_PRODUCT : UMATCH_NONE;
    248 }
    249 
    250 Static void
    251 zyd_attachhook(device_t self)
    252 {
    253 	struct zyd_softc *sc = device_private(self);
    254 	firmware_handle_t fwh;
    255 	const char *fwname;
    256 	u_char *fw;
    257 	size_t size;
    258 	int error;
    259 
    260 	fwname = (sc->mac_rev == ZYD_ZD1211) ? "zyd-zd1211" : "zyd-zd1211b";
    261 	if ((error = firmware_open("zyd", fwname, &fwh)) != 0) {
    262 		aprint_error_dev(sc->sc_dev,
    263 		    "failed to open firmware %s (error=%d)\n", fwname, error);
    264 		return;
    265 	}
    266 	size = firmware_get_size(fwh);
    267 	fw = firmware_malloc(size);
    268 	if (fw == NULL) {
    269 		aprint_error_dev(sc->sc_dev,
    270 		    "failed to allocate firmware memory\n");
    271 		firmware_close(fwh);
    272 		return;
    273 	}
    274 	error = firmware_read(fwh, 0, fw, size);
    275 	firmware_close(fwh);
    276 	if (error != 0) {
    277 		aprint_error_dev(sc->sc_dev,
    278 		    "failed to read firmware (error %d)\n", error);
    279 		firmware_free(fw, size);
    280 		return;
    281 	}
    282 
    283 	error = zyd_loadfirmware(sc, fw, size);
    284 	if (error != 0) {
    285 		aprint_error_dev(sc->sc_dev,
    286 		    "could not load firmware (error=%d)\n", error);
    287 		firmware_free(fw, size);
    288 		return;
    289 	}
    290 
    291 	firmware_free(fw, size);
    292 
    293 	/* complete the attach process */
    294 	if ((error = zyd_complete_attach(sc)) == 0)
    295 		sc->attached = 1;
    296 	return;
    297 }
    298 
    299 static void
    300 zyd_attach(device_t parent, device_t self, void *aux)
    301 {
    302 	struct zyd_softc *sc = device_private(self);
    303 	struct usb_attach_arg *uaa = aux;
    304 	char *devinfop;
    305 	usb_device_descriptor_t* ddesc;
    306 	struct ifnet *ifp = &sc->sc_if;
    307 
    308 	sc->sc_dev = self;
    309 	sc->sc_udev = uaa->uaa_device;
    310 
    311 	aprint_naive("\n");
    312 	aprint_normal("\n");
    313 
    314 	devinfop = usbd_devinfo_alloc(uaa->uaa_device, 0);
    315 	aprint_normal_dev(self, "%s\n", devinfop);
    316 	usbd_devinfo_free(devinfop);
    317 
    318 	sc->mac_rev = zyd_lookup(uaa->uaa_vendor, uaa->uaa_product)->rev;
    319 
    320 	ddesc = usbd_get_device_descriptor(sc->sc_udev);
    321 	if (UGETW(ddesc->bcdDevice) < 0x4330) {
    322 		aprint_error_dev(self, "device version mismatch: %#x "
    323 		    "(only >= 43.30 supported)\n", UGETW(ddesc->bcdDevice));
    324 		return;
    325 	}
    326 
    327 	ifp->if_softc = sc;
    328 	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
    329 	ifp->if_init = zyd_init;
    330 	ifp->if_ioctl = zyd_ioctl;
    331 	ifp->if_start = zyd_start;
    332 	ifp->if_watchdog = zyd_watchdog;
    333 	IFQ_SET_MAXLEN(&ifp->if_snd, IFQ_MAXLEN);
    334 	IFQ_SET_READY(&ifp->if_snd);
    335 	memcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ);
    336 
    337 	mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_SOFTUSB);
    338 	cv_init(&sc->sc_cmdcv, "zydcmd");
    339 	SIMPLEQ_INIT(&sc->sc_rqh);
    340 
    341 	/* defer configuration after file system is ready to load firmware */
    342 	config_mountroot(self, zyd_attachhook);
    343 }
    344 
    345 Static int
    346 zyd_complete_attach(struct zyd_softc *sc)
    347 {
    348 	struct ieee80211com *ic = &sc->sc_ic;
    349 	struct ifnet *ifp = &sc->sc_if;
    350 	usbd_status error;
    351 	int i;
    352 
    353 	usb_init_task(&sc->sc_task, zyd_task, sc, 0);
    354 	callout_init(&(sc->sc_scan_ch), 0);
    355 
    356 	sc->amrr.amrr_min_success_threshold =  1;
    357 	sc->amrr.amrr_max_success_threshold = 10;
    358 	callout_init(&sc->sc_amrr_ch, 0);
    359 
    360 	error = usbd_set_config_no(sc->sc_udev, ZYD_CONFIG_NO, 1);
    361 	if (error != 0) {
    362 		aprint_error_dev(sc->sc_dev, "failed to set configuration"
    363 		    ", err=%s\n", usbd_errstr(error));
    364 		goto fail;
    365 	}
    366 
    367 	error = usbd_device2interface_handle(sc->sc_udev, ZYD_IFACE_INDEX,
    368 	    &sc->sc_iface);
    369 	if (error != 0) {
    370 		aprint_error_dev(sc->sc_dev,
    371 		    "getting interface handle failed\n");
    372 		goto fail;
    373 	}
    374 
    375 	if ((error = zyd_open_pipes(sc)) != 0) {
    376 		aprint_error_dev(sc->sc_dev, "could not open pipes\n");
    377 		goto fail;
    378 	}
    379 
    380 	if ((error = zyd_read_eeprom(sc)) != 0) {
    381 		aprint_error_dev(sc->sc_dev, "could not read EEPROM\n");
    382 		goto fail;
    383 	}
    384 
    385 	if ((error = zyd_rf_attach(sc, sc->rf_rev)) != 0) {
    386 		aprint_error_dev(sc->sc_dev, "could not attach RF\n");
    387 		goto fail;
    388 	}
    389 
    390 	if ((error = zyd_hw_init(sc)) != 0) {
    391 		aprint_error_dev(sc->sc_dev,
    392 		    "hardware initialization failed\n");
    393 		goto fail;
    394 	}
    395 
    396 	aprint_normal_dev(sc->sc_dev,
    397 	    "HMAC ZD1211%s, FW %02x.%02x, RF %s, PA %x, address %s\n",
    398 	    (sc->mac_rev == ZYD_ZD1211) ? "": "B",
    399 	    sc->fw_rev >> 8, sc->fw_rev & 0xff, zyd_rf_name(sc->rf_rev),
    400 	    sc->pa_rev, ether_sprintf(ic->ic_myaddr));
    401 
    402 	ic->ic_ifp = ifp;
    403 	ic->ic_phytype = IEEE80211_T_OFDM;	/* not only, but not used */
    404 	ic->ic_opmode = IEEE80211_M_STA;	/* default to BSS mode */
    405 	ic->ic_state = IEEE80211_S_INIT;
    406 
    407 	/* set device capabilities */
    408 	ic->ic_caps =
    409 	    IEEE80211_C_MONITOR |	/* monitor mode supported */
    410 	    IEEE80211_C_TXPMGT |	/* tx power management */
    411 	    IEEE80211_C_SHPREAMBLE |	/* short preamble supported */
    412 	    IEEE80211_C_WEP;		/* s/w WEP */
    413 
    414 	/* set supported .11b and .11g rates */
    415 	ic->ic_sup_rates[IEEE80211_MODE_11B] = ieee80211_std_rateset_11b;
    416 	ic->ic_sup_rates[IEEE80211_MODE_11G] = ieee80211_std_rateset_11g;
    417 
    418 	/* set supported .11b and .11g channels (1 through 14) */
    419 	for (i = 1; i <= 14; i++) {
    420 		ic->ic_channels[i].ic_freq =
    421 		    ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ);
    422 		ic->ic_channels[i].ic_flags =
    423 		    IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM |
    424 		    IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ;
    425 	}
    426 
    427 	if_attach(ifp);
    428 	ieee80211_ifattach(ic);
    429 	ic->ic_node_alloc = zyd_node_alloc;
    430 	ic->ic_newassoc = zyd_newassoc;
    431 
    432 	/* override state transition machine */
    433 	sc->sc_newstate = ic->ic_newstate;
    434 	ic->ic_newstate = zyd_newstate;
    435 
    436 	/* XXX media locking needs revisiting */
    437 	mutex_init(&sc->sc_media_mtx, MUTEX_DEFAULT, IPL_SOFTUSB);
    438 	ieee80211_media_init_with_lock(ic,
    439 	    zyd_media_change, ieee80211_media_status, &sc->sc_media_mtx);
    440 
    441 	bpf_attach2(ifp, DLT_IEEE802_11_RADIO,
    442 	    sizeof(struct ieee80211_frame) + IEEE80211_RADIOTAP_HDRLEN,
    443 	    &sc->sc_drvbpf);
    444 
    445 	sc->sc_rxtap_len = sizeof(sc->sc_rxtapu);
    446 	sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len);
    447 	sc->sc_rxtap.wr_ihdr.it_present = htole32(ZYD_RX_RADIOTAP_PRESENT);
    448 
    449 	sc->sc_txtap_len = sizeof(sc->sc_txtapu);
    450 	sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len);
    451 	sc->sc_txtap.wt_ihdr.it_present = htole32(ZYD_TX_RADIOTAP_PRESENT);
    452 
    453 	ieee80211_announce(ic);
    454 
    455 	usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, sc->sc_dev);
    456 
    457 fail:	return error;
    458 }
    459 
    460 static int
    461 zyd_detach(device_t self, int flags)
    462 {
    463 	struct zyd_softc *sc = device_private(self);
    464 	struct ieee80211com *ic = &sc->sc_ic;
    465 	struct ifnet *ifp = &sc->sc_if;
    466 
    467 	if (!sc->attached)
    468 		return 0;
    469 
    470 	mutex_enter(&sc->sc_lock);
    471 
    472 	zyd_stop(ifp, 1);
    473 	callout_halt(&sc->sc_scan_ch, NULL);
    474 	callout_halt(&sc->sc_amrr_ch, NULL);
    475 	usb_rem_task_wait(sc->sc_udev, &sc->sc_task, USB_TASKQ_DRIVER, NULL);
    476 
    477 	/* Abort, etc. done by zyd_stop */
    478 	zyd_close_pipes(sc);
    479 
    480 	sc->attached = 0;
    481 
    482 	bpf_detach(ifp);
    483 	ieee80211_ifdetach(ic);
    484 	if_detach(ifp);
    485 
    486 	mutex_exit(&sc->sc_lock);
    487 
    488 	mutex_destroy(&sc->sc_lock);
    489 	cv_destroy(&sc->sc_cmdcv);
    490 
    491 	usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, sc->sc_dev);
    492 
    493 	return 0;
    494 }
    495 
    496 Static int
    497 zyd_open_pipes(struct zyd_softc *sc)
    498 {
    499 	usb_endpoint_descriptor_t *edesc;
    500 	usbd_status error;
    501 
    502 	/* interrupt in */
    503 	edesc = usbd_get_endpoint_descriptor(sc->sc_iface, 0x83);
    504 	if (edesc == NULL)
    505 		return EINVAL;
    506 
    507 	sc->ibuf_size = UGETW(edesc->wMaxPacketSize);
    508 	if (sc->ibuf_size == 0)	/* should not happen */
    509 		return EINVAL;
    510 
    511 	sc->ibuf = kmem_alloc(sc->ibuf_size, KM_SLEEP);
    512 
    513 	error = usbd_open_pipe_intr(sc->sc_iface, 0x83, USBD_SHORT_XFER_OK,
    514 	    &sc->zyd_ep[ZYD_ENDPT_IIN], sc, sc->ibuf, sc->ibuf_size, zyd_intr,
    515 	    USBD_DEFAULT_INTERVAL);
    516 	if (error != 0) {
    517 		printf("%s: open rx intr pipe failed: %s\n",
    518 		    device_xname(sc->sc_dev), usbd_errstr(error));
    519 		goto fail;
    520 	}
    521 
    522 	/* interrupt out (not necessarily an interrupt pipe) */
    523 	error = usbd_open_pipe(sc->sc_iface, 0x04, USBD_EXCLUSIVE_USE,
    524 	    &sc->zyd_ep[ZYD_ENDPT_IOUT]);
    525 	if (error != 0) {
    526 		printf("%s: open tx intr pipe failed: %s\n",
    527 		    device_xname(sc->sc_dev), usbd_errstr(error));
    528 		goto fail;
    529 	}
    530 
    531 	/* bulk in */
    532 	error = usbd_open_pipe(sc->sc_iface, 0x82, USBD_EXCLUSIVE_USE,
    533 	    &sc->zyd_ep[ZYD_ENDPT_BIN]);
    534 	if (error != 0) {
    535 		printf("%s: open rx pipe failed: %s\n",
    536 		    device_xname(sc->sc_dev), usbd_errstr(error));
    537 		goto fail;
    538 	}
    539 
    540 	/* bulk out */
    541 	error = usbd_open_pipe(sc->sc_iface, 0x01, USBD_EXCLUSIVE_USE,
    542 	    &sc->zyd_ep[ZYD_ENDPT_BOUT]);
    543 	if (error != 0) {
    544 		printf("%s: open tx pipe failed: %s\n",
    545 		    device_xname(sc->sc_dev), usbd_errstr(error));
    546 		goto fail;
    547 	}
    548 
    549 	return 0;
    550 
    551 fail:	zyd_close_pipes(sc);
    552 	return error;
    553 }
    554 
    555 Static void
    556 zyd_close_pipes(struct zyd_softc *sc)
    557 {
    558 	int i;
    559 
    560 	for (i = 0; i < ZYD_ENDPT_CNT; i++) {
    561 		if (sc->zyd_ep[i] != NULL) {
    562 			usbd_close_pipe(sc->zyd_ep[i]);
    563 			sc->zyd_ep[i] = NULL;
    564 		}
    565 	}
    566 	if (sc->ibuf != NULL) {
    567 		kmem_free(sc->ibuf, sc->ibuf_size);
    568 		sc->ibuf = NULL;
    569 	}
    570 }
    571 
    572 Static int
    573 zyd_alloc_tx_list(struct zyd_softc *sc)
    574 {
    575 	int i, error;
    576 
    577 	sc->tx_queued = 0;
    578 
    579 	for (i = 0; i < ZYD_TX_LIST_CNT; i++) {
    580 		struct zyd_tx_data *data = &sc->tx_data[i];
    581 
    582 		data->sc = sc;	/* backpointer for callbacks */
    583 
    584 		error = usbd_create_xfer(sc->zyd_ep[ZYD_ENDPT_BOUT],
    585 		    ZYD_MAX_TXBUFSZ, USBD_FORCE_SHORT_XFER, 0, &data->xfer);
    586 		if (error) {
    587 			printf("%s: could not allocate tx xfer\n",
    588 			    device_xname(sc->sc_dev));
    589 			goto fail;
    590 		}
    591 		data->buf = usbd_get_buffer(data->xfer);
    592 
    593 		/* clear Tx descriptor */
    594 		memset(data->buf, 0, sizeof(struct zyd_tx_desc));
    595 	}
    596 	return 0;
    597 
    598 fail:	zyd_free_tx_list(sc);
    599 	return error;
    600 }
    601 
    602 Static void
    603 zyd_free_tx_list(struct zyd_softc *sc)
    604 {
    605 	int i;
    606 
    607 	for (i = 0; i < ZYD_TX_LIST_CNT; i++) {
    608 		struct zyd_tx_data *data = &sc->tx_data[i];
    609 
    610 		if (data->xfer != NULL) {
    611 			usbd_destroy_xfer(data->xfer);
    612 			data->xfer = NULL;
    613 		}
    614 		if (data->ni != NULL) {
    615 			ieee80211_free_node(data->ni);
    616 			data->ni = NULL;
    617 		}
    618 	}
    619 }
    620 
    621 Static int
    622 zyd_alloc_rx_list(struct zyd_softc *sc)
    623 {
    624 	int i, error;
    625 
    626 	for (i = 0; i < ZYD_RX_LIST_CNT; i++) {
    627 		struct zyd_rx_data *data = &sc->rx_data[i];
    628 
    629 		data->sc = sc;	/* backpointer for callbacks */
    630 
    631 		error = usbd_create_xfer(sc->zyd_ep[ZYD_ENDPT_BIN],
    632 		    ZYX_MAX_RXBUFSZ, 0, 0, &data->xfer);
    633 		if (error) {
    634 			printf("%s: could not allocate rx xfer\n",
    635 			    device_xname(sc->sc_dev));
    636 			goto fail;
    637 		}
    638 		data->buf = usbd_get_buffer(data->xfer);
    639 	}
    640 	return 0;
    641 
    642 fail:	zyd_free_rx_list(sc);
    643 	return error;
    644 }
    645 
    646 Static void
    647 zyd_free_rx_list(struct zyd_softc *sc)
    648 {
    649 	int i;
    650 
    651 	for (i = 0; i < ZYD_RX_LIST_CNT; i++) {
    652 		struct zyd_rx_data *data = &sc->rx_data[i];
    653 
    654 		if (data->xfer != NULL) {
    655 			usbd_destroy_xfer(data->xfer);
    656 			data->xfer = NULL;
    657 		}
    658 	}
    659 }
    660 
    661 /* ARGUSED */
    662 Static struct ieee80211_node *
    663 zyd_node_alloc(struct ieee80211_node_table *nt __unused)
    664 {
    665 	struct zyd_node *zn;
    666 
    667 	zn = malloc(sizeof(struct zyd_node), M_80211_NODE, M_NOWAIT | M_ZERO);
    668 	return zn ? &zn->ni : NULL;
    669 }
    670 
    671 Static int
    672 zyd_media_change(struct ifnet *ifp)
    673 {
    674 	int error;
    675 
    676 	error = ieee80211_media_change(ifp);
    677 	if (error != ENETRESET)
    678 		return error;
    679 
    680 	if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) == (IFF_UP | IFF_RUNNING))
    681 		zyd_init(ifp);
    682 
    683 	return 0;
    684 }
    685 
    686 /*
    687  * This function is called periodically (every 200ms) during scanning to
    688  * switch from one channel to another.
    689  */
    690 Static void
    691 zyd_next_scan(void *arg)
    692 {
    693 	struct zyd_softc *sc = arg;
    694 	struct ieee80211com *ic = &sc->sc_ic;
    695 
    696 	if (ic->ic_state == IEEE80211_S_SCAN)
    697 		ieee80211_next_scan(ic);
    698 }
    699 
    700 Static void
    701 zyd_task(void *arg)
    702 {
    703 	struct zyd_softc *sc = arg;
    704 	struct ieee80211com *ic = &sc->sc_ic;
    705 	enum ieee80211_state ostate;
    706 
    707 	ostate = ic->ic_state;
    708 
    709 	switch (sc->sc_state) {
    710 	case IEEE80211_S_INIT:
    711 		if (ostate == IEEE80211_S_RUN) {
    712 			/* turn link LED off */
    713 			zyd_set_led(sc, ZYD_LED1, 0);
    714 
    715 			/* stop data LED from blinking */
    716 			zyd_write32(sc, sc->fwbase + ZYD_FW_LINK_STATUS, 0);
    717 		}
    718 		break;
    719 
    720 	case IEEE80211_S_SCAN:
    721 		zyd_set_chan(sc, ic->ic_curchan);
    722 		callout_reset(&sc->sc_scan_ch, hz / 5, zyd_next_scan, sc);
    723 		break;
    724 
    725 	case IEEE80211_S_AUTH:
    726 	case IEEE80211_S_ASSOC:
    727 		zyd_set_chan(sc, ic->ic_curchan);
    728 		break;
    729 
    730 	case IEEE80211_S_RUN:
    731 	{
    732 		struct ieee80211_node *ni = ic->ic_bss;
    733 
    734 		zyd_set_chan(sc, ic->ic_curchan);
    735 
    736 		if (ic->ic_opmode != IEEE80211_M_MONITOR) {
    737 			/* turn link LED on */
    738 			zyd_set_led(sc, ZYD_LED1, 1);
    739 
    740 			/* make data LED blink upon Tx */
    741 			zyd_write32(sc, sc->fwbase + ZYD_FW_LINK_STATUS, 1);
    742 
    743 			zyd_set_bssid(sc, ni->ni_bssid);
    744 		}
    745 
    746 		if (ic->ic_opmode == IEEE80211_M_STA) {
    747 			/* fake a join to init the tx rate */
    748 			zyd_newassoc(ni, 1);
    749 		}
    750 
    751 		/* start automatic rate control timer */
    752 		if (ic->ic_fixed_rate == IEEE80211_FIXED_RATE_NONE)
    753 			callout_reset(&sc->sc_amrr_ch, hz, zyd_amrr_timeout, sc);
    754 
    755 		break;
    756 	}
    757 	}
    758 
    759 	sc->sc_newstate(ic, sc->sc_state, -1);
    760 }
    761 
    762 Static int
    763 zyd_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg)
    764 {
    765 	struct zyd_softc *sc = ic->ic_ifp->if_softc;
    766 
    767 	if (!sc->attached)
    768 		return ENXIO;
    769 
    770 	/*
    771 	 * XXXSMP: This does not wait for the task, if it is in flight,
    772 	 * to complete.  If this code works at all, it must rely on the
    773 	 * kernel lock to serialize with the USB task thread.
    774 	 */
    775 	usb_rem_task(sc->sc_udev, &sc->sc_task);
    776 	callout_stop(&sc->sc_scan_ch);
    777 	callout_stop(&sc->sc_amrr_ch);
    778 
    779 	/* do it in a process context */
    780 	sc->sc_state = nstate;
    781 	usb_add_task(sc->sc_udev, &sc->sc_task, USB_TASKQ_DRIVER);
    782 
    783 	return 0;
    784 }
    785 
    786 Static int
    787 zyd_cmd(struct zyd_softc *sc, uint16_t code, const void *idata, int ilen,
    788     void *odata, int olen, u_int flags)
    789 {
    790 	struct usbd_xfer *xfer;
    791 	struct zyd_cmd cmd;
    792 	struct rq rq;
    793 	uint16_t xferflags;
    794 	int error;
    795 	usbd_status uerror;
    796 
    797 	error = usbd_create_xfer(sc->zyd_ep[ZYD_ENDPT_IOUT],
    798 	    sizeof(uint16_t) + ilen, USBD_FORCE_SHORT_XFER, 0, &xfer);
    799 	if (error)
    800 		return error;
    801 
    802 	cmd.code = htole16(code);
    803 	memcpy(cmd.data, idata, ilen);
    804 
    805 	xferflags = USBD_FORCE_SHORT_XFER;
    806 	if (!(flags & ZYD_CMD_FLAG_READ))
    807 		xferflags |= USBD_SYNCHRONOUS;
    808 	else {
    809 		rq.idata = idata;
    810 		rq.odata = odata;
    811 		rq.len = olen / sizeof(struct zyd_pair);
    812 		mutex_enter(&sc->sc_lock);
    813 		SIMPLEQ_INSERT_TAIL(&sc->sc_rqh, &rq, rq);
    814 		mutex_exit(&sc->sc_lock);
    815 	}
    816 
    817 	usbd_setup_xfer(xfer, 0, &cmd, sizeof(uint16_t) + ilen, xferflags,
    818 	    ZYD_INTR_TIMEOUT, NULL);
    819 	uerror = usbd_transfer(xfer);
    820 	if (uerror != USBD_IN_PROGRESS && uerror != 0) {
    821 		printf("%s: could not send command (error=%s)\n",
    822 		    device_xname(sc->sc_dev), usbd_errstr(uerror));
    823 		(void)usbd_destroy_xfer(xfer);
    824 		return EIO;
    825 	}
    826 	if (!(flags & ZYD_CMD_FLAG_READ)) {
    827 		(void)usbd_destroy_xfer(xfer);
    828 		return 0;	/* write: don't wait for reply */
    829 	}
    830 	/* wait at most one second for command reply */
    831 	mutex_enter(&sc->sc_lock);
    832 	error = cv_timedwait_sig(&sc->sc_cmdcv, &sc->sc_lock, hz);
    833 	if (error == EWOULDBLOCK)
    834 		printf("%s: zyd_read sleep timeout\n", device_xname(sc->sc_dev));
    835 	SIMPLEQ_REMOVE(&sc->sc_rqh, &rq, rq, rq);
    836 	mutex_exit(&sc->sc_lock);
    837 
    838 	(void)usbd_destroy_xfer(xfer);
    839 	return error;
    840 }
    841 
    842 Static int
    843 zyd_read16(struct zyd_softc *sc, uint16_t reg, uint16_t *val)
    844 {
    845 	struct zyd_pair tmp;
    846 	int error;
    847 
    848 	reg = htole16(reg);
    849 	error = zyd_cmd(sc, ZYD_CMD_IORD, &reg, sizeof(reg), &tmp, sizeof(tmp),
    850 	    ZYD_CMD_FLAG_READ);
    851 	if (error == 0)
    852 		*val = le16toh(tmp.val);
    853 	else
    854 		*val = 0;
    855 	return error;
    856 }
    857 
    858 Static int
    859 zyd_read32(struct zyd_softc *sc, uint16_t reg, uint32_t *val)
    860 {
    861 	struct zyd_pair tmp[2];
    862 	uint16_t regs[2];
    863 	int error;
    864 
    865 	regs[0] = htole16(ZYD_REG32_HI(reg));
    866 	regs[1] = htole16(ZYD_REG32_LO(reg));
    867 	error = zyd_cmd(sc, ZYD_CMD_IORD, regs, sizeof(regs), tmp, sizeof(tmp),
    868 	    ZYD_CMD_FLAG_READ);
    869 	if (error == 0)
    870 		*val = le16toh(tmp[0].val) << 16 | le16toh(tmp[1].val);
    871 	else
    872 		*val = 0;
    873 	return error;
    874 }
    875 
    876 Static int
    877 zyd_write16(struct zyd_softc *sc, uint16_t reg, uint16_t val)
    878 {
    879 	struct zyd_pair pair;
    880 
    881 	pair.reg = htole16(reg);
    882 	pair.val = htole16(val);
    883 
    884 	return zyd_cmd(sc, ZYD_CMD_IOWR, &pair, sizeof(pair), NULL, 0, 0);
    885 }
    886 
    887 Static int
    888 zyd_write32(struct zyd_softc *sc, uint16_t reg, uint32_t val)
    889 {
    890 	struct zyd_pair pair[2];
    891 
    892 	pair[0].reg = htole16(ZYD_REG32_HI(reg));
    893 	pair[0].val = htole16(val >> 16);
    894 	pair[1].reg = htole16(ZYD_REG32_LO(reg));
    895 	pair[1].val = htole16(val & 0xffff);
    896 
    897 	return zyd_cmd(sc, ZYD_CMD_IOWR, pair, sizeof(pair), NULL, 0, 0);
    898 }
    899 
    900 Static int
    901 zyd_rfwrite(struct zyd_softc *sc, uint32_t val)
    902 {
    903 	struct zyd_rf *rf = &sc->sc_rf;
    904 	struct zyd_rfwrite req;
    905 	uint16_t cr203;
    906 	int i;
    907 
    908 	(void)zyd_read16(sc, ZYD_CR203, &cr203);
    909 	cr203 &= ~(ZYD_RF_IF_LE | ZYD_RF_CLK | ZYD_RF_DATA);
    910 
    911 	req.code  = htole16(2);
    912 	req.width = htole16(rf->width);
    913 	for (i = 0; i < rf->width; i++) {
    914 		req.bit[i] = htole16(cr203);
    915 		if (val & (1 << (rf->width - 1 - i)))
    916 			req.bit[i] |= htole16(ZYD_RF_DATA);
    917 	}
    918 	return zyd_cmd(sc, ZYD_CMD_RFCFG, &req, 4 + 2 * rf->width, NULL, 0, 0);
    919 }
    920 
    921 Static void
    922 zyd_lock_phy(struct zyd_softc *sc)
    923 {
    924 	uint32_t tmp;
    925 
    926 	(void)zyd_read32(sc, ZYD_MAC_MISC, &tmp);
    927 	tmp &= ~ZYD_UNLOCK_PHY_REGS;
    928 	(void)zyd_write32(sc, ZYD_MAC_MISC, tmp);
    929 }
    930 
    931 Static void
    932 zyd_unlock_phy(struct zyd_softc *sc)
    933 {
    934 	uint32_t tmp;
    935 
    936 	(void)zyd_read32(sc, ZYD_MAC_MISC, &tmp);
    937 	tmp |= ZYD_UNLOCK_PHY_REGS;
    938 	(void)zyd_write32(sc, ZYD_MAC_MISC, tmp);
    939 }
    940 
    941 /*
    942  * RFMD RF methods.
    943  */
    944 Static int
    945 zyd_rfmd_init(struct zyd_rf *rf)
    946 {
    947 	struct zyd_softc *sc = rf->rf_sc;
    948 	static const struct zyd_phy_pair phyini[] = ZYD_RFMD_PHY;
    949 	static const uint32_t rfini[] = ZYD_RFMD_RF;
    950 	int error;
    951 	size_t i;
    952 
    953 	/* init RF-dependent PHY registers */
    954 	for (i = 0; i < __arraycount(phyini); i++) {
    955 		error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
    956 		if (error != 0)
    957 			return error;
    958 	}
    959 
    960 	/* init RFMD radio */
    961 	for (i = 0; i < __arraycount(rfini); i++) {
    962 		if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
    963 			return error;
    964 	}
    965 	return 0;
    966 }
    967 
    968 Static int
    969 zyd_rfmd_switch_radio(struct zyd_rf *rf, int on)
    970 {
    971 	struct zyd_softc *sc = rf->rf_sc;
    972 
    973 	(void)zyd_write16(sc, ZYD_CR10, on ? 0x89 : 0x15);
    974 	(void)zyd_write16(sc, ZYD_CR11, on ? 0x00 : 0x81);
    975 
    976 	return 0;
    977 }
    978 
    979 Static int
    980 zyd_rfmd_set_channel(struct zyd_rf *rf, uint8_t chan)
    981 {
    982 	struct zyd_softc *sc = rf->rf_sc;
    983 	static const struct {
    984 		uint32_t	r1, r2;
    985 	} rfprog[] = ZYD_RFMD_CHANTABLE;
    986 
    987 	(void)zyd_rfwrite(sc, rfprog[chan - 1].r1);
    988 	(void)zyd_rfwrite(sc, rfprog[chan - 1].r2);
    989 
    990 	return 0;
    991 }
    992 
    993 /*
    994  * AL2230 RF methods.
    995  */
    996 Static int
    997 zyd_al2230_init(struct zyd_rf *rf)
    998 {
    999 	struct zyd_softc *sc = rf->rf_sc;
   1000 	static const struct zyd_phy_pair phyini[] = ZYD_AL2230_PHY;
   1001 	static const struct zyd_phy_pair phy2230s[] = ZYD_AL2230S_PHY_INIT;
   1002 	static const uint32_t rfini[] = ZYD_AL2230_RF;
   1003 	int error;
   1004 	size_t i;
   1005 
   1006 	/* init RF-dependent PHY registers */
   1007 	for (i = 0; i < __arraycount(phyini); i++) {
   1008 		error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
   1009 		if (error != 0)
   1010 			return error;
   1011 	}
   1012 
   1013 	if (sc->rf_rev == ZYD_RF_AL2230S) {
   1014 		for (i = 0; i < __arraycount(phy2230s); i++) {
   1015 			error = zyd_write16(sc, phy2230s[i].reg,
   1016 			    phy2230s[i].val);
   1017 			if (error != 0)
   1018 				return error;
   1019 		}
   1020 	}
   1021 
   1022 	/* init AL2230 radio */
   1023 	for (i = 0; i < __arraycount(rfini); i++) {
   1024 		if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
   1025 			return error;
   1026 	}
   1027 	return 0;
   1028 }
   1029 
   1030 Static int
   1031 zyd_al2230_init_b(struct zyd_rf *rf)
   1032 {
   1033 	struct zyd_softc *sc = rf->rf_sc;
   1034 	static const struct zyd_phy_pair phyini[] = ZYD_AL2230_PHY_B;
   1035 	static const uint32_t rfini[] = ZYD_AL2230_RF_B;
   1036 	int error;
   1037 	size_t i;
   1038 
   1039 	/* init RF-dependent PHY registers */
   1040 	for (i = 0; i < __arraycount(phyini); i++) {
   1041 		error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
   1042 		if (error != 0)
   1043 			return error;
   1044 	}
   1045 
   1046 	/* init AL2230 radio */
   1047 	for (i = 0; i < __arraycount(rfini); i++) {
   1048 		if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
   1049 			return error;
   1050 	}
   1051 	return 0;
   1052 }
   1053 
   1054 Static int
   1055 zyd_al2230_switch_radio(struct zyd_rf *rf, int on)
   1056 {
   1057 	struct zyd_softc *sc = rf->rf_sc;
   1058 	int on251 = (sc->mac_rev == ZYD_ZD1211) ? 0x3f : 0x7f;
   1059 
   1060 	(void)zyd_write16(sc, ZYD_CR11,  on ? 0x00 : 0x04);
   1061 	(void)zyd_write16(sc, ZYD_CR251, on ? on251 : 0x2f);
   1062 
   1063 	return 0;
   1064 }
   1065 
   1066 Static int
   1067 zyd_al2230_set_channel(struct zyd_rf *rf, uint8_t chan)
   1068 {
   1069 	struct zyd_softc *sc = rf->rf_sc;
   1070 	static const struct {
   1071 		uint32_t	r1, r2, r3;
   1072 	} rfprog[] = ZYD_AL2230_CHANTABLE;
   1073 
   1074 	(void)zyd_rfwrite(sc, rfprog[chan - 1].r1);
   1075 	(void)zyd_rfwrite(sc, rfprog[chan - 1].r2);
   1076 	(void)zyd_rfwrite(sc, rfprog[chan - 1].r3);
   1077 
   1078 	(void)zyd_write16(sc, ZYD_CR138, 0x28);
   1079 	(void)zyd_write16(sc, ZYD_CR203, 0x06);
   1080 
   1081 	return 0;
   1082 }
   1083 
   1084 /*
   1085  * AL7230B RF methods.
   1086  */
   1087 Static int
   1088 zyd_al7230B_init(struct zyd_rf *rf)
   1089 {
   1090 	struct zyd_softc *sc = rf->rf_sc;
   1091 	static const struct zyd_phy_pair phyini_1[] = ZYD_AL7230B_PHY_1;
   1092 	static const struct zyd_phy_pair phyini_2[] = ZYD_AL7230B_PHY_2;
   1093 	static const struct zyd_phy_pair phyini_3[] = ZYD_AL7230B_PHY_3;
   1094 	static const uint32_t rfini_1[] = ZYD_AL7230B_RF_1;
   1095 	static const uint32_t rfini_2[] = ZYD_AL7230B_RF_2;
   1096 	int error;
   1097 	size_t i;
   1098 
   1099 	/* for AL7230B, PHY and RF need to be initialized in "phases" */
   1100 
   1101 	/* init RF-dependent PHY registers, part one */
   1102 	for (i = 0; i < __arraycount(phyini_1); i++) {
   1103 		error = zyd_write16(sc, phyini_1[i].reg, phyini_1[i].val);
   1104 		if (error != 0)
   1105 			return error;
   1106 	}
   1107 	/* init AL7230B radio, part one */
   1108 	for (i = 0; i < __arraycount(rfini_1); i++) {
   1109 		if ((error = zyd_rfwrite(sc, rfini_1[i])) != 0)
   1110 			return error;
   1111 	}
   1112 	/* init RF-dependent PHY registers, part two */
   1113 	for (i = 0; i < __arraycount(phyini_2); i++) {
   1114 		error = zyd_write16(sc, phyini_2[i].reg, phyini_2[i].val);
   1115 		if (error != 0)
   1116 			return error;
   1117 	}
   1118 	/* init AL7230B radio, part two */
   1119 	for (i = 0; i < __arraycount(rfini_2); i++) {
   1120 		if ((error = zyd_rfwrite(sc, rfini_2[i])) != 0)
   1121 			return error;
   1122 	}
   1123 	/* init RF-dependent PHY registers, part three */
   1124 	for (i = 0; i < __arraycount(phyini_3); i++) {
   1125 		error = zyd_write16(sc, phyini_3[i].reg, phyini_3[i].val);
   1126 		if (error != 0)
   1127 			return error;
   1128 	}
   1129 
   1130 	return 0;
   1131 }
   1132 
   1133 Static int
   1134 zyd_al7230B_switch_radio(struct zyd_rf *rf, int on)
   1135 {
   1136 	struct zyd_softc *sc = rf->rf_sc;
   1137 
   1138 	(void)zyd_write16(sc, ZYD_CR11,  on ? 0x00 : 0x04);
   1139 	(void)zyd_write16(sc, ZYD_CR251, on ? 0x3f : 0x2f);
   1140 
   1141 	return 0;
   1142 }
   1143 
   1144 Static int
   1145 zyd_al7230B_set_channel(struct zyd_rf *rf, uint8_t chan)
   1146 {
   1147 	struct zyd_softc *sc = rf->rf_sc;
   1148 	static const struct {
   1149 		uint32_t	r1, r2;
   1150 	} rfprog[] = ZYD_AL7230B_CHANTABLE;
   1151 	static const uint32_t rfsc[] = ZYD_AL7230B_RF_SETCHANNEL;
   1152 	int error;
   1153 	size_t i;
   1154 
   1155 	(void)zyd_write16(sc, ZYD_CR240, 0x57);
   1156 	(void)zyd_write16(sc, ZYD_CR251, 0x2f);
   1157 
   1158 	for (i = 0; i < __arraycount(rfsc); i++) {
   1159 		if ((error = zyd_rfwrite(sc, rfsc[i])) != 0)
   1160 			return error;
   1161 	}
   1162 
   1163 	(void)zyd_write16(sc, ZYD_CR128, 0x14);
   1164 	(void)zyd_write16(sc, ZYD_CR129, 0x12);
   1165 	(void)zyd_write16(sc, ZYD_CR130, 0x10);
   1166 	(void)zyd_write16(sc, ZYD_CR38,  0x38);
   1167 	(void)zyd_write16(sc, ZYD_CR136, 0xdf);
   1168 
   1169 	(void)zyd_rfwrite(sc, rfprog[chan - 1].r1);
   1170 	(void)zyd_rfwrite(sc, rfprog[chan - 1].r2);
   1171 	(void)zyd_rfwrite(sc, 0x3c9000);
   1172 
   1173 	(void)zyd_write16(sc, ZYD_CR251, 0x3f);
   1174 	(void)zyd_write16(sc, ZYD_CR203, 0x06);
   1175 	(void)zyd_write16(sc, ZYD_CR240, 0x08);
   1176 
   1177 	return 0;
   1178 }
   1179 
   1180 /*
   1181  * AL2210 RF methods.
   1182  */
   1183 Static int
   1184 zyd_al2210_init(struct zyd_rf *rf)
   1185 {
   1186 	struct zyd_softc *sc = rf->rf_sc;
   1187 	static const struct zyd_phy_pair phyini[] = ZYD_AL2210_PHY;
   1188 	static const uint32_t rfini[] = ZYD_AL2210_RF;
   1189 	uint32_t tmp;
   1190 	int error;
   1191 	size_t i;
   1192 
   1193 	(void)zyd_write32(sc, ZYD_CR18, 2);
   1194 
   1195 	/* init RF-dependent PHY registers */
   1196 	for (i = 0; i < __arraycount(phyini); i++) {
   1197 		error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
   1198 		if (error != 0)
   1199 			return error;
   1200 	}
   1201 	/* init AL2210 radio */
   1202 	for (i = 0; i < __arraycount(rfini); i++) {
   1203 		if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
   1204 			return error;
   1205 	}
   1206 	(void)zyd_write16(sc, ZYD_CR47, 0x1e);
   1207 	(void)zyd_read32(sc, ZYD_CR_RADIO_PD, &tmp);
   1208 	(void)zyd_write32(sc, ZYD_CR_RADIO_PD, tmp & ~1);
   1209 	(void)zyd_write32(sc, ZYD_CR_RADIO_PD, tmp | 1);
   1210 	(void)zyd_write32(sc, ZYD_CR_RFCFG, 0x05);
   1211 	(void)zyd_write32(sc, ZYD_CR_RFCFG, 0x00);
   1212 	(void)zyd_write16(sc, ZYD_CR47, 0x1e);
   1213 	(void)zyd_write32(sc, ZYD_CR18, 3);
   1214 
   1215 	return 0;
   1216 }
   1217 
   1218 Static int
   1219 zyd_al2210_switch_radio(struct zyd_rf *rf, int on)
   1220 {
   1221 	/* vendor driver does nothing for this RF chip */
   1222 
   1223 	return 0;
   1224 }
   1225 
   1226 Static int
   1227 zyd_al2210_set_channel(struct zyd_rf *rf, uint8_t chan)
   1228 {
   1229 	struct zyd_softc *sc = rf->rf_sc;
   1230 	static const uint32_t rfprog[] = ZYD_AL2210_CHANTABLE;
   1231 	uint32_t tmp;
   1232 
   1233 	(void)zyd_write32(sc, ZYD_CR18, 2);
   1234 	(void)zyd_write16(sc, ZYD_CR47, 0x1e);
   1235 	(void)zyd_read32(sc, ZYD_CR_RADIO_PD, &tmp);
   1236 	(void)zyd_write32(sc, ZYD_CR_RADIO_PD, tmp & ~1);
   1237 	(void)zyd_write32(sc, ZYD_CR_RADIO_PD, tmp | 1);
   1238 	(void)zyd_write32(sc, ZYD_CR_RFCFG, 0x05);
   1239 
   1240 	(void)zyd_write32(sc, ZYD_CR_RFCFG, 0x00);
   1241 	(void)zyd_write16(sc, ZYD_CR47, 0x1e);
   1242 
   1243 	/* actually set the channel */
   1244 	(void)zyd_rfwrite(sc, rfprog[chan - 1]);
   1245 
   1246 	(void)zyd_write32(sc, ZYD_CR18, 3);
   1247 
   1248 	return 0;
   1249 }
   1250 
   1251 /*
   1252  * GCT RF methods.
   1253  */
   1254 Static int
   1255 zyd_gct_init(struct zyd_rf *rf)
   1256 {
   1257 	struct zyd_softc *sc = rf->rf_sc;
   1258 	static const struct zyd_phy_pair phyini[] = ZYD_GCT_PHY;
   1259 	static const uint32_t rfini[] = ZYD_GCT_RF;
   1260 	int error;
   1261 	size_t i;
   1262 
   1263 	/* init RF-dependent PHY registers */
   1264 	for (i = 0; i < __arraycount(phyini); i++) {
   1265 		error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
   1266 		if (error != 0)
   1267 			return error;
   1268 	}
   1269 	/* init cgt radio */
   1270 	for (i = 0; i < __arraycount(rfini); i++) {
   1271 		if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
   1272 			return error;
   1273 	}
   1274 	return 0;
   1275 }
   1276 
   1277 Static int
   1278 zyd_gct_switch_radio(struct zyd_rf *rf, int on)
   1279 {
   1280 	/* vendor driver does nothing for this RF chip */
   1281 
   1282 	return 0;
   1283 }
   1284 
   1285 Static int
   1286 zyd_gct_set_channel(struct zyd_rf *rf, uint8_t chan)
   1287 {
   1288 	struct zyd_softc *sc = rf->rf_sc;
   1289 	static const uint32_t rfprog[] = ZYD_GCT_CHANTABLE;
   1290 
   1291 	(void)zyd_rfwrite(sc, 0x1c0000);
   1292 	(void)zyd_rfwrite(sc, rfprog[chan - 1]);
   1293 	(void)zyd_rfwrite(sc, 0x1c0008);
   1294 
   1295 	return 0;
   1296 }
   1297 
   1298 /*
   1299  * Maxim RF methods.
   1300  */
   1301 Static int
   1302 zyd_maxim_init(struct zyd_rf *rf)
   1303 {
   1304 	struct zyd_softc *sc = rf->rf_sc;
   1305 	static const struct zyd_phy_pair phyini[] = ZYD_MAXIM_PHY;
   1306 	static const uint32_t rfini[] = ZYD_MAXIM_RF;
   1307 	uint16_t tmp;
   1308 	int error;
   1309 	size_t i;
   1310 
   1311 	/* init RF-dependent PHY registers */
   1312 	for (i = 0; i < __arraycount(phyini); i++) {
   1313 		error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
   1314 		if (error != 0)
   1315 			return error;
   1316 	}
   1317 	(void)zyd_read16(sc, ZYD_CR203, &tmp);
   1318 	(void)zyd_write16(sc, ZYD_CR203, tmp & ~(1 << 4));
   1319 
   1320 	/* init maxim radio */
   1321 	for (i = 0; i < __arraycount(rfini); i++) {
   1322 		if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
   1323 			return error;
   1324 	}
   1325 	(void)zyd_read16(sc, ZYD_CR203, &tmp);
   1326 	(void)zyd_write16(sc, ZYD_CR203, tmp | (1 << 4));
   1327 
   1328 	return 0;
   1329 }
   1330 
   1331 Static int
   1332 zyd_maxim_switch_radio(struct zyd_rf *rf, int on)
   1333 {
   1334 	/* vendor driver does nothing for this RF chip */
   1335 
   1336 	return 0;
   1337 }
   1338 
   1339 Static int
   1340 zyd_maxim_set_channel(struct zyd_rf *rf, uint8_t chan)
   1341 {
   1342 	struct zyd_softc *sc = rf->rf_sc;
   1343 	static const struct zyd_phy_pair phyini[] = ZYD_MAXIM_PHY;
   1344 	static const uint32_t rfini[] = ZYD_MAXIM_RF;
   1345 	static const struct {
   1346 		uint32_t	r1, r2;
   1347 	} rfprog[] = ZYD_MAXIM_CHANTABLE;
   1348 	uint16_t tmp;
   1349 	int error;
   1350 	size_t i;
   1351 
   1352 	/*
   1353 	 * Do the same as we do when initializing it, except for the channel
   1354 	 * values coming from the two channel tables.
   1355 	 */
   1356 
   1357 	/* init RF-dependent PHY registers */
   1358 	for (i = 0; i < __arraycount(phyini); i++) {
   1359 		error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
   1360 		if (error != 0)
   1361 			return error;
   1362 	}
   1363 	(void)zyd_read16(sc, ZYD_CR203, &tmp);
   1364 	(void)zyd_write16(sc, ZYD_CR203, tmp & ~(1 << 4));
   1365 
   1366 	/* first two values taken from the chantables */
   1367 	(void)zyd_rfwrite(sc, rfprog[chan - 1].r1);
   1368 	(void)zyd_rfwrite(sc, rfprog[chan - 1].r2);
   1369 
   1370 	/* init maxim radio - skipping the two first values */
   1371 	for (i = 2; i < __arraycount(rfini); i++) {
   1372 		if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
   1373 			return error;
   1374 	}
   1375 	(void)zyd_read16(sc, ZYD_CR203, &tmp);
   1376 	(void)zyd_write16(sc, ZYD_CR203, tmp | (1 << 4));
   1377 
   1378 	return 0;
   1379 }
   1380 
   1381 /*
   1382  * Maxim2 RF methods.
   1383  */
   1384 Static int
   1385 zyd_maxim2_init(struct zyd_rf *rf)
   1386 {
   1387 	struct zyd_softc *sc = rf->rf_sc;
   1388 	static const struct zyd_phy_pair phyini[] = ZYD_MAXIM2_PHY;
   1389 	static const uint32_t rfini[] = ZYD_MAXIM2_RF;
   1390 	uint16_t tmp;
   1391 	int error;
   1392 	size_t i;
   1393 
   1394 	/* init RF-dependent PHY registers */
   1395 	for (i = 0; i < __arraycount(phyini); i++) {
   1396 		error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
   1397 		if (error != 0)
   1398 			return error;
   1399 	}
   1400 	(void)zyd_read16(sc, ZYD_CR203, &tmp);
   1401 	(void)zyd_write16(sc, ZYD_CR203, tmp & ~(1 << 4));
   1402 
   1403 	/* init maxim2 radio */
   1404 	for (i = 0; i < __arraycount(rfini); i++) {
   1405 		if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
   1406 			return error;
   1407 	}
   1408 	(void)zyd_read16(sc, ZYD_CR203, &tmp);
   1409 	(void)zyd_write16(sc, ZYD_CR203, tmp | (1 << 4));
   1410 
   1411 	return 0;
   1412 }
   1413 
   1414 Static int
   1415 zyd_maxim2_switch_radio(struct zyd_rf *rf, int on)
   1416 {
   1417 	/* vendor driver does nothing for this RF chip */
   1418 
   1419 	return 0;
   1420 }
   1421 
   1422 Static int
   1423 zyd_maxim2_set_channel(struct zyd_rf *rf, uint8_t chan)
   1424 {
   1425 	struct zyd_softc *sc = rf->rf_sc;
   1426 	static const struct zyd_phy_pair phyini[] = ZYD_MAXIM2_PHY;
   1427 	static const uint32_t rfini[] = ZYD_MAXIM2_RF;
   1428 	static const struct {
   1429 		uint32_t	r1, r2;
   1430 	} rfprog[] = ZYD_MAXIM2_CHANTABLE;
   1431 	uint16_t tmp;
   1432 	int error;
   1433 	size_t i;
   1434 
   1435 	/*
   1436 	 * Do the same as we do when initializing it, except for the channel
   1437 	 * values coming from the two channel tables.
   1438 	 */
   1439 
   1440 	/* init RF-dependent PHY registers */
   1441 	for (i = 0; i < __arraycount(phyini); i++) {
   1442 		error = zyd_write16(sc, phyini[i].reg, phyini[i].val);
   1443 		if (error != 0)
   1444 			return error;
   1445 	}
   1446 	(void)zyd_read16(sc, ZYD_CR203, &tmp);
   1447 	(void)zyd_write16(sc, ZYD_CR203, tmp & ~(1 << 4));
   1448 
   1449 	/* first two values taken from the chantables */
   1450 	(void)zyd_rfwrite(sc, rfprog[chan - 1].r1);
   1451 	(void)zyd_rfwrite(sc, rfprog[chan - 1].r2);
   1452 
   1453 	/* init maxim2 radio - skipping the two first values */
   1454 	for (i = 2; i < __arraycount(rfini); i++) {
   1455 		if ((error = zyd_rfwrite(sc, rfini[i])) != 0)
   1456 			return error;
   1457 	}
   1458 	(void)zyd_read16(sc, ZYD_CR203, &tmp);
   1459 	(void)zyd_write16(sc, ZYD_CR203, tmp | (1 << 4));
   1460 
   1461 	return 0;
   1462 }
   1463 
   1464 Static int
   1465 zyd_rf_attach(struct zyd_softc *sc, uint8_t type)
   1466 {
   1467 	struct zyd_rf *rf = &sc->sc_rf;
   1468 
   1469 	rf->rf_sc = sc;
   1470 
   1471 	switch (type) {
   1472 	case ZYD_RF_RFMD:
   1473 		rf->init         = zyd_rfmd_init;
   1474 		rf->switch_radio = zyd_rfmd_switch_radio;
   1475 		rf->set_channel  = zyd_rfmd_set_channel;
   1476 		rf->width        = 24;	/* 24-bit RF values */
   1477 		break;
   1478 	case ZYD_RF_AL2230:
   1479 	case ZYD_RF_AL2230S:
   1480 		if (sc->mac_rev == ZYD_ZD1211B)
   1481 			rf->init = zyd_al2230_init_b;
   1482 		else
   1483 			rf->init = zyd_al2230_init;
   1484 		rf->switch_radio = zyd_al2230_switch_radio;
   1485 		rf->set_channel  = zyd_al2230_set_channel;
   1486 		rf->width        = 24;	/* 24-bit RF values */
   1487 		break;
   1488 	case ZYD_RF_AL7230B:
   1489 		rf->init         = zyd_al7230B_init;
   1490 		rf->switch_radio = zyd_al7230B_switch_radio;
   1491 		rf->set_channel  = zyd_al7230B_set_channel;
   1492 		rf->width        = 24;	/* 24-bit RF values */
   1493 		break;
   1494 	case ZYD_RF_AL2210:
   1495 		rf->init         = zyd_al2210_init;
   1496 		rf->switch_radio = zyd_al2210_switch_radio;
   1497 		rf->set_channel  = zyd_al2210_set_channel;
   1498 		rf->width        = 24;	/* 24-bit RF values */
   1499 		break;
   1500 	case ZYD_RF_GCT:
   1501 		rf->init         = zyd_gct_init;
   1502 		rf->switch_radio = zyd_gct_switch_radio;
   1503 		rf->set_channel  = zyd_gct_set_channel;
   1504 		rf->width        = 21;	/* 21-bit RF values */
   1505 		break;
   1506 	case ZYD_RF_MAXIM_NEW:
   1507 		rf->init         = zyd_maxim_init;
   1508 		rf->switch_radio = zyd_maxim_switch_radio;
   1509 		rf->set_channel  = zyd_maxim_set_channel;
   1510 		rf->width        = 18;	/* 18-bit RF values */
   1511 		break;
   1512 	case ZYD_RF_MAXIM_NEW2:
   1513 		rf->init         = zyd_maxim2_init;
   1514 		rf->switch_radio = zyd_maxim2_switch_radio;
   1515 		rf->set_channel  = zyd_maxim2_set_channel;
   1516 		rf->width        = 18;	/* 18-bit RF values */
   1517 		break;
   1518 	default:
   1519 		printf("%s: sorry, radio \"%s\" is not supported yet\n",
   1520 		    device_xname(sc->sc_dev), zyd_rf_name(type));
   1521 		return EINVAL;
   1522 	}
   1523 	return 0;
   1524 }
   1525 
   1526 Static const char *
   1527 zyd_rf_name(uint8_t type)
   1528 {
   1529 	static const char * const zyd_rfs[] = {
   1530 		"unknown", "unknown", "UW2451",   "UCHIP",     "AL2230",
   1531 		"AL7230B", "THETA",   "AL2210",   "MAXIM_NEW", "GCT",
   1532 		"AL2230S", "RALINK",  "INTERSIL", "RFMD",      "MAXIM_NEW2",
   1533 		"PHILIPS"
   1534 	};
   1535 
   1536 	return zyd_rfs[(type > 15) ? 0 : type];
   1537 }
   1538 
   1539 Static int
   1540 zyd_hw_init(struct zyd_softc *sc)
   1541 {
   1542 	struct zyd_rf *rf = &sc->sc_rf;
   1543 	const struct zyd_phy_pair *phyp;
   1544 	int error;
   1545 
   1546 	/* specify that the plug and play is finished */
   1547 	(void)zyd_write32(sc, ZYD_MAC_AFTER_PNP, 1);
   1548 
   1549 	(void)zyd_read16(sc, ZYD_FIRMWARE_BASE_ADDR, &sc->fwbase);
   1550 	DPRINTF(("firmware base address=0x%04x\n", sc->fwbase));
   1551 
   1552 	/* retrieve firmware revision number */
   1553 	(void)zyd_read16(sc, sc->fwbase + ZYD_FW_FIRMWARE_REV, &sc->fw_rev);
   1554 
   1555 	(void)zyd_write32(sc, ZYD_CR_GPI_EN, 0);
   1556 	(void)zyd_write32(sc, ZYD_MAC_CONT_WIN_LIMIT, 0x7f043f);
   1557 
   1558 	/* disable interrupts */
   1559 	(void)zyd_write32(sc, ZYD_CR_INTERRUPT, 0);
   1560 
   1561 	/* PHY init */
   1562 	zyd_lock_phy(sc);
   1563 	phyp = (sc->mac_rev == ZYD_ZD1211B) ? zyd_def_phyB : zyd_def_phy;
   1564 	for (; phyp->reg != 0; phyp++) {
   1565 		if ((error = zyd_write16(sc, phyp->reg, phyp->val)) != 0)
   1566 			goto fail;
   1567 	}
   1568 	zyd_unlock_phy(sc);
   1569 
   1570 	/* HMAC init */
   1571 	zyd_write32(sc, ZYD_MAC_ACK_EXT, 0x00000020);
   1572 	zyd_write32(sc, ZYD_CR_ADDA_MBIAS_WT, 0x30000808);
   1573 
   1574 	if (sc->mac_rev == ZYD_ZD1211) {
   1575 		zyd_write32(sc, ZYD_MAC_RETRY, 0x00000002);
   1576 	} else {
   1577 		zyd_write32(sc, ZYD_MAC_RETRY, 0x02020202);
   1578 		zyd_write32(sc, ZYD_MACB_TXPWR_CTL4, 0x007f003f);
   1579 		zyd_write32(sc, ZYD_MACB_TXPWR_CTL3, 0x007f003f);
   1580 		zyd_write32(sc, ZYD_MACB_TXPWR_CTL2, 0x003f001f);
   1581 		zyd_write32(sc, ZYD_MACB_TXPWR_CTL1, 0x001f000f);
   1582 		zyd_write32(sc, ZYD_MACB_AIFS_CTL1, 0x00280028);
   1583 		zyd_write32(sc, ZYD_MACB_AIFS_CTL2, 0x008C003C);
   1584 		zyd_write32(sc, ZYD_MACB_TXOP, 0x01800824);
   1585 	}
   1586 
   1587 	zyd_write32(sc, ZYD_MAC_SNIFFER, 0x00000000);
   1588 	zyd_write32(sc, ZYD_MAC_RXFILTER, 0x00000000);
   1589 	zyd_write32(sc, ZYD_MAC_GHTBL, 0x00000000);
   1590 	zyd_write32(sc, ZYD_MAC_GHTBH, 0x80000000);
   1591 	zyd_write32(sc, ZYD_MAC_MISC, 0x000000a4);
   1592 	zyd_write32(sc, ZYD_CR_ADDA_PWR_DWN, 0x0000007f);
   1593 	zyd_write32(sc, ZYD_MAC_BCNCFG, 0x00f00401);
   1594 	zyd_write32(sc, ZYD_MAC_PHY_DELAY2, 0x00000000);
   1595 	zyd_write32(sc, ZYD_MAC_ACK_EXT, 0x00000080);
   1596 	zyd_write32(sc, ZYD_CR_ADDA_PWR_DWN, 0x00000000);
   1597 	zyd_write32(sc, ZYD_MAC_SIFS_ACK_TIME, 0x00000100);
   1598 	zyd_write32(sc, ZYD_MAC_DIFS_EIFS_SIFS, 0x0547c032);
   1599 	zyd_write32(sc, ZYD_CR_RX_PE_DELAY, 0x00000070);
   1600 	zyd_write32(sc, ZYD_CR_PS_CTRL, 0x10000000);
   1601 	zyd_write32(sc, ZYD_MAC_RTSCTSRATE, 0x02030203);
   1602 	zyd_write32(sc, ZYD_MAC_RX_THRESHOLD, 0x000c0640);
   1603 	zyd_write32(sc, ZYD_MAC_BACKOFF_PROTECT, 0x00000114);
   1604 
   1605 	/* RF chip init */
   1606 	zyd_lock_phy(sc);
   1607 	error = (*rf->init)(rf);
   1608 	zyd_unlock_phy(sc);
   1609 	if (error != 0) {
   1610 		printf("%s: radio initialization failed\n",
   1611 		    device_xname(sc->sc_dev));
   1612 		goto fail;
   1613 	}
   1614 
   1615 	/* init beacon interval to 100ms */
   1616 	if ((error = zyd_set_beacon_interval(sc, 100)) != 0)
   1617 		goto fail;
   1618 
   1619 fail:	return error;
   1620 }
   1621 
   1622 Static int
   1623 zyd_read_eeprom(struct zyd_softc *sc)
   1624 {
   1625 	struct ieee80211com *ic = &sc->sc_ic;
   1626 	uint32_t tmp;
   1627 	uint16_t val;
   1628 	int i;
   1629 
   1630 	/* read MAC address */
   1631 	(void)zyd_read32(sc, ZYD_EEPROM_MAC_ADDR_P1, &tmp);
   1632 	ic->ic_myaddr[0] = tmp & 0xff;
   1633 	ic->ic_myaddr[1] = tmp >>  8;
   1634 	ic->ic_myaddr[2] = tmp >> 16;
   1635 	ic->ic_myaddr[3] = tmp >> 24;
   1636 	(void)zyd_read32(sc, ZYD_EEPROM_MAC_ADDR_P2, &tmp);
   1637 	ic->ic_myaddr[4] = tmp & 0xff;
   1638 	ic->ic_myaddr[5] = tmp >>  8;
   1639 
   1640 	(void)zyd_read32(sc, ZYD_EEPROM_POD, &tmp);
   1641 	sc->rf_rev = tmp & 0x0f;
   1642 	sc->pa_rev = (tmp >> 16) & 0x0f;
   1643 
   1644 	/* read regulatory domain (currently unused) */
   1645 	(void)zyd_read32(sc, ZYD_EEPROM_SUBID, &tmp);
   1646 	sc->regdomain = tmp >> 16;
   1647 	DPRINTF(("regulatory domain %x\n", sc->regdomain));
   1648 
   1649 	/* read Tx power calibration tables */
   1650 	for (i = 0; i < 7; i++) {
   1651 		(void)zyd_read16(sc, ZYD_EEPROM_PWR_CAL + i, &val);
   1652 		sc->pwr_cal[i * 2] = val >> 8;
   1653 		sc->pwr_cal[i * 2 + 1] = val & 0xff;
   1654 
   1655 		(void)zyd_read16(sc, ZYD_EEPROM_PWR_INT + i, &val);
   1656 		sc->pwr_int[i * 2] = val >> 8;
   1657 		sc->pwr_int[i * 2 + 1] = val & 0xff;
   1658 
   1659 		(void)zyd_read16(sc, ZYD_EEPROM_36M_CAL + i, &val);
   1660 		sc->ofdm36_cal[i * 2] = val >> 8;
   1661 		sc->ofdm36_cal[i * 2 + 1] = val & 0xff;
   1662 
   1663 		(void)zyd_read16(sc, ZYD_EEPROM_48M_CAL + i, &val);
   1664 		sc->ofdm48_cal[i * 2] = val >> 8;
   1665 		sc->ofdm48_cal[i * 2 + 1] = val & 0xff;
   1666 
   1667 		(void)zyd_read16(sc, ZYD_EEPROM_54M_CAL + i, &val);
   1668 		sc->ofdm54_cal[i * 2] = val >> 8;
   1669 		sc->ofdm54_cal[i * 2 + 1] = val & 0xff;
   1670 	}
   1671 	return 0;
   1672 }
   1673 
   1674 Static int
   1675 zyd_set_macaddr(struct zyd_softc *sc, const uint8_t *addr)
   1676 {
   1677 	uint32_t tmp;
   1678 
   1679 	tmp = addr[3] << 24 | addr[2] << 16 | addr[1] << 8 | addr[0];
   1680 	(void)zyd_write32(sc, ZYD_MAC_MACADRL, tmp);
   1681 
   1682 	tmp = addr[5] << 8 | addr[4];
   1683 	(void)zyd_write32(sc, ZYD_MAC_MACADRH, tmp);
   1684 
   1685 	return 0;
   1686 }
   1687 
   1688 Static int
   1689 zyd_set_bssid(struct zyd_softc *sc, const uint8_t *addr)
   1690 {
   1691 	uint32_t tmp;
   1692 
   1693 	tmp = addr[3] << 24 | addr[2] << 16 | addr[1] << 8 | addr[0];
   1694 	(void)zyd_write32(sc, ZYD_MAC_BSSADRL, tmp);
   1695 
   1696 	tmp = addr[5] << 8 | addr[4];
   1697 	(void)zyd_write32(sc, ZYD_MAC_BSSADRH, tmp);
   1698 
   1699 	return 0;
   1700 }
   1701 
   1702 Static int
   1703 zyd_switch_radio(struct zyd_softc *sc, int on)
   1704 {
   1705 	struct zyd_rf *rf = &sc->sc_rf;
   1706 	int error;
   1707 
   1708 	zyd_lock_phy(sc);
   1709 	error = (*rf->switch_radio)(rf, on);
   1710 	zyd_unlock_phy(sc);
   1711 
   1712 	return error;
   1713 }
   1714 
   1715 Static void
   1716 zyd_set_led(struct zyd_softc *sc, int which, int on)
   1717 {
   1718 	uint32_t tmp;
   1719 
   1720 	(void)zyd_read32(sc, ZYD_MAC_TX_PE_CONTROL, &tmp);
   1721 	tmp &= ~which;
   1722 	if (on)
   1723 		tmp |= which;
   1724 	(void)zyd_write32(sc, ZYD_MAC_TX_PE_CONTROL, tmp);
   1725 }
   1726 
   1727 Static int
   1728 zyd_set_rxfilter(struct zyd_softc *sc)
   1729 {
   1730 	uint32_t rxfilter;
   1731 
   1732 	switch (sc->sc_ic.ic_opmode) {
   1733 	case IEEE80211_M_STA:
   1734 		rxfilter = ZYD_FILTER_BSS;
   1735 		break;
   1736 	case IEEE80211_M_IBSS:
   1737 	case IEEE80211_M_HOSTAP:
   1738 		rxfilter = ZYD_FILTER_HOSTAP;
   1739 		break;
   1740 	case IEEE80211_M_MONITOR:
   1741 		rxfilter = ZYD_FILTER_MONITOR;
   1742 		break;
   1743 	default:
   1744 		/* should not get there */
   1745 		return EINVAL;
   1746 	}
   1747 	return zyd_write32(sc, ZYD_MAC_RXFILTER, rxfilter);
   1748 }
   1749 
   1750 Static void
   1751 zyd_set_chan(struct zyd_softc *sc, struct ieee80211_channel *c)
   1752 {
   1753 	struct ieee80211com *ic = &sc->sc_ic;
   1754 	struct zyd_rf *rf = &sc->sc_rf;
   1755 	u_int chan;
   1756 
   1757 	chan = ieee80211_chan2ieee(ic, c);
   1758 	if (chan == 0 || chan == IEEE80211_CHAN_ANY)
   1759 		return;
   1760 
   1761 	zyd_lock_phy(sc);
   1762 
   1763 	(*rf->set_channel)(rf, chan);
   1764 
   1765 	/* update Tx power */
   1766 	(void)zyd_write32(sc, ZYD_CR31, sc->pwr_int[chan - 1]);
   1767 	(void)zyd_write32(sc, ZYD_CR68, sc->pwr_cal[chan - 1]);
   1768 
   1769 	if (sc->mac_rev == ZYD_ZD1211B) {
   1770 		(void)zyd_write32(sc, ZYD_CR67, sc->ofdm36_cal[chan - 1]);
   1771 		(void)zyd_write32(sc, ZYD_CR66, sc->ofdm48_cal[chan - 1]);
   1772 		(void)zyd_write32(sc, ZYD_CR65, sc->ofdm54_cal[chan - 1]);
   1773 
   1774 		(void)zyd_write32(sc, ZYD_CR69, 0x28);
   1775 		(void)zyd_write32(sc, ZYD_CR69, 0x2a);
   1776 	}
   1777 
   1778 	zyd_unlock_phy(sc);
   1779 }
   1780 
   1781 Static int
   1782 zyd_set_beacon_interval(struct zyd_softc *sc, int bintval)
   1783 {
   1784 	/* XXX this is probably broken.. */
   1785 	(void)zyd_write32(sc, ZYD_CR_ATIM_WND_PERIOD, bintval - 2);
   1786 	(void)zyd_write32(sc, ZYD_CR_PRE_TBTT,        bintval - 1);
   1787 	(void)zyd_write32(sc, ZYD_CR_BCN_INTERVAL,    bintval);
   1788 
   1789 	return 0;
   1790 }
   1791 
   1792 Static uint8_t
   1793 zyd_plcp_signal(int rate)
   1794 {
   1795 	switch (rate) {
   1796 	/* CCK rates (returned values are device-dependent) */
   1797 	case 2:		return 0x0;
   1798 	case 4:		return 0x1;
   1799 	case 11:	return 0x2;
   1800 	case 22:	return 0x3;
   1801 
   1802 	/* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */
   1803 	case 12:	return 0xb;
   1804 	case 18:	return 0xf;
   1805 	case 24:	return 0xa;
   1806 	case 36:	return 0xe;
   1807 	case 48:	return 0x9;
   1808 	case 72:	return 0xd;
   1809 	case 96:	return 0x8;
   1810 	case 108:	return 0xc;
   1811 
   1812 	/* unsupported rates (should not get there) */
   1813 	default:	return 0xff;
   1814 	}
   1815 }
   1816 
   1817 Static void
   1818 zyd_intr(struct usbd_xfer *xfer, void * priv, usbd_status status)
   1819 {
   1820 	struct zyd_softc *sc = (struct zyd_softc *)priv;
   1821 	struct zyd_cmd *cmd;
   1822 	uint32_t datalen;
   1823 
   1824 	if (status != USBD_NORMAL_COMPLETION) {
   1825 		if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
   1826 			return;
   1827 
   1828 		if (status == USBD_STALLED) {
   1829 			usbd_clear_endpoint_stall_async(
   1830 			    sc->zyd_ep[ZYD_ENDPT_IIN]);
   1831 		}
   1832 		return;
   1833 	}
   1834 
   1835 	cmd = (struct zyd_cmd *)sc->ibuf;
   1836 
   1837 	if (le16toh(cmd->code) == ZYD_NOTIF_RETRYSTATUS) {
   1838 		struct zyd_notif_retry *retry =
   1839 		    (struct zyd_notif_retry *)cmd->data;
   1840 		struct ieee80211com *ic = &sc->sc_ic;
   1841 		struct ifnet *ifp = &sc->sc_if;
   1842 		struct ieee80211_node *ni;
   1843 
   1844 		DPRINTF(("retry intr: rate=%#x addr=%s count=%d (%#x)\n",
   1845 		    le16toh(retry->rate), ether_sprintf(retry->macaddr),
   1846 		    le16toh(retry->count) & 0xff, le16toh(retry->count)));
   1847 
   1848 		/*
   1849 		 * Find the node to which the packet was sent and update its
   1850 		 * retry statistics.  In BSS mode, this node is the AP we're
   1851 		 * associated to so no lookup is actually needed.
   1852 		 */
   1853 		if (ic->ic_opmode != IEEE80211_M_STA) {
   1854 			ni = ieee80211_find_node(&ic->ic_scan, retry->macaddr);
   1855 			if (ni == NULL)
   1856 				return;	/* just ignore */
   1857 		} else
   1858 			ni = ic->ic_bss;
   1859 
   1860 		((struct zyd_node *)ni)->amn.amn_retrycnt++;
   1861 
   1862 		if (le16toh(retry->count) & 0x100)
   1863 			if_statinc(ifp, if_oerrors);
   1864 
   1865 	} else if (le16toh(cmd->code) == ZYD_NOTIF_IORD) {
   1866 		struct rq *rqp;
   1867 
   1868 		if (le16toh(*(uint16_t *)cmd->data) == ZYD_CR_INTERRUPT)
   1869 			return;	/* HMAC interrupt */
   1870 
   1871 		usbd_get_xfer_status(xfer, NULL, NULL, &datalen, NULL);
   1872 		datalen -= sizeof(cmd->code);
   1873 		datalen -= 2;	/* XXX: padding? */
   1874 
   1875 		mutex_enter(&sc->sc_lock);
   1876 		SIMPLEQ_FOREACH(rqp, &sc->sc_rqh, rq) {
   1877 			int i;
   1878 
   1879 			if (sizeof(struct zyd_pair) * rqp->len != datalen)
   1880 				continue;
   1881 			for (i = 0; i < rqp->len; i++) {
   1882 				if (*(((const uint16_t *)rqp->idata) + i) !=
   1883 				    (((struct zyd_pair *)cmd->data) + i)->reg)
   1884 					break;
   1885 			}
   1886 			if (i != rqp->len)
   1887 				continue;
   1888 
   1889 			/* copy answer into caller-supplied buffer */
   1890 			memcpy(rqp->odata, cmd->data,
   1891 			    sizeof(struct zyd_pair) * rqp->len);
   1892 			cv_signal(&sc->sc_cmdcv);
   1893 			mutex_exit(&sc->sc_lock);
   1894 			return;
   1895 		}
   1896 		mutex_exit(&sc->sc_lock);
   1897 		return;	/* unexpected IORD notification */
   1898 	} else {
   1899 		printf("%s: unknown notification %x\n", device_xname(sc->sc_dev),
   1900 		    le16toh(cmd->code));
   1901 	}
   1902 }
   1903 
   1904 Static void
   1905 zyd_rx_data(struct zyd_softc *sc, const uint8_t *buf, uint16_t len)
   1906 {
   1907 	struct ieee80211com *ic = &sc->sc_ic;
   1908 	struct ifnet *ifp = &sc->sc_if;
   1909 	struct ieee80211_node *ni;
   1910 	struct ieee80211_frame *wh;
   1911 	const struct zyd_plcphdr *plcp;
   1912 	const struct zyd_rx_stat *stat;
   1913 	struct mbuf *m;
   1914 	int rlen, s;
   1915 
   1916 	if (len < ZYD_MIN_FRAGSZ) {
   1917 		printf("%s: frame too short (length=%d)\n",
   1918 		    device_xname(sc->sc_dev), len);
   1919 		if_statinc(ifp, if_ierrors);
   1920 		return;
   1921 	}
   1922 
   1923 	plcp = (const struct zyd_plcphdr *)buf;
   1924 	stat = (const struct zyd_rx_stat *)
   1925 	    (buf + len - sizeof(struct zyd_rx_stat));
   1926 
   1927 	if (stat->flags & ZYD_RX_ERROR) {
   1928 		DPRINTF(("%s: RX status indicated error (%x)\n",
   1929 		    device_xname(sc->sc_dev), stat->flags));
   1930 		if_statinc(ifp, if_ierrors);
   1931 		return;
   1932 	}
   1933 
   1934 	/* compute actual frame length */
   1935 	rlen = len - sizeof(struct zyd_plcphdr) -
   1936 	    sizeof(struct zyd_rx_stat) - IEEE80211_CRC_LEN;
   1937 
   1938 	/* allocate a mbuf to store the frame */
   1939 	MGETHDR(m, M_DONTWAIT, MT_DATA);
   1940 	if (m == NULL) {
   1941 		printf("%s: could not allocate rx mbuf\n",
   1942 		    device_xname(sc->sc_dev));
   1943 		if_statinc(ifp, if_ierrors);
   1944 		return;
   1945 	}
   1946 	if (rlen > MHLEN) {
   1947 		MCLGET(m, M_DONTWAIT);
   1948 		if (!(m->m_flags & M_EXT)) {
   1949 			printf("%s: could not allocate rx mbuf cluster\n",
   1950 			    device_xname(sc->sc_dev));
   1951 			m_freem(m);
   1952 			if_statinc(ifp, if_ierrors);
   1953 			return;
   1954 		}
   1955 	}
   1956 	m_set_rcvif(m, ifp);
   1957 	m->m_pkthdr.len = m->m_len = rlen;
   1958 	memcpy(mtod(m, uint8_t *), (const uint8_t *)(plcp + 1), rlen);
   1959 
   1960 	s = splnet();
   1961 
   1962 	if (sc->sc_drvbpf != NULL) {
   1963 		struct zyd_rx_radiotap_header *tap = &sc->sc_rxtap;
   1964 		static const uint8_t rates[] = {
   1965 			/* reverse function of zyd_plcp_signal() */
   1966 			2, 4, 11, 22, 0, 0, 0, 0,
   1967 			96, 48, 24, 12, 108, 72, 36, 18
   1968 		};
   1969 
   1970 		tap->wr_flags = IEEE80211_RADIOTAP_F_FCS;
   1971 		tap->wr_chan_freq = htole16(ic->ic_curchan->ic_freq);
   1972 		tap->wr_chan_flags = htole16(ic->ic_curchan->ic_flags);
   1973 		tap->wr_rssi = stat->rssi;
   1974 		tap->wr_rate = rates[plcp->signal & 0xf];
   1975 
   1976 		bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_rxtap_len, m, BPF_D_IN);
   1977 	}
   1978 
   1979 	wh = mtod(m, struct ieee80211_frame *);
   1980 	ni = ieee80211_find_rxnode(ic, (struct ieee80211_frame_min *)wh);
   1981 	ieee80211_input(ic, m, ni, stat->rssi, 0);
   1982 
   1983 	/* node is no longer needed */
   1984 	ieee80211_free_node(ni);
   1985 
   1986 	splx(s);
   1987 }
   1988 
   1989 Static void
   1990 zyd_rxeof(struct usbd_xfer *xfer, void * priv, usbd_status status)
   1991 {
   1992 	struct zyd_rx_data *data = priv;
   1993 	struct zyd_softc *sc = data->sc;
   1994 	struct ifnet *ifp = &sc->sc_if;
   1995 	const struct zyd_rx_desc *desc;
   1996 	int len;
   1997 
   1998 	if (status != USBD_NORMAL_COMPLETION) {
   1999 		if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
   2000 			return;
   2001 
   2002 		if (status == USBD_STALLED)
   2003 			usbd_clear_endpoint_stall(sc->zyd_ep[ZYD_ENDPT_BIN]);
   2004 
   2005 		goto skip;
   2006 	}
   2007 	usbd_get_xfer_status(xfer, NULL, NULL, &len, NULL);
   2008 
   2009 	if (len < ZYD_MIN_RXBUFSZ) {
   2010 		printf("%s: xfer too short (length=%d)\n",
   2011 		    device_xname(sc->sc_dev), len);
   2012 		if_statinc(ifp, if_ierrors);
   2013 		goto skip;
   2014 	}
   2015 
   2016 	desc = (const struct zyd_rx_desc *)
   2017 	    (data->buf + len - sizeof(struct zyd_rx_desc));
   2018 
   2019 	if (UGETW(desc->tag) == ZYD_TAG_MULTIFRAME) {
   2020 		const uint8_t *p = data->buf, *end = p + len;
   2021 		int i;
   2022 
   2023 		DPRINTFN(3, ("received multi-frame transfer\n"));
   2024 
   2025 		for (i = 0; i < ZYD_MAX_RXFRAMECNT; i++) {
   2026 			const uint16_t len16 = UGETW(desc->len[i]);
   2027 
   2028 			if (len16 == 0 || p + len16 > end)
   2029 				break;
   2030 
   2031 			zyd_rx_data(sc, p, len16);
   2032 			/* next frame is aligned on a 32-bit boundary */
   2033 			p += (len16 + 3) & ~3;
   2034 		}
   2035 	} else {
   2036 		DPRINTFN(3, ("received single-frame transfer\n"));
   2037 
   2038 		zyd_rx_data(sc, data->buf, len);
   2039 	}
   2040 
   2041 skip:	/* setup a new transfer */
   2042 
   2043 	usbd_setup_xfer(xfer, data, NULL, ZYX_MAX_RXBUFSZ, USBD_SHORT_XFER_OK,
   2044 	    USBD_NO_TIMEOUT, zyd_rxeof);
   2045 	(void)usbd_transfer(xfer);
   2046 }
   2047 
   2048 Static int
   2049 zyd_tx_mgt(struct zyd_softc *sc, struct mbuf *m0, struct ieee80211_node *ni)
   2050 {
   2051 	struct ieee80211com *ic = &sc->sc_ic;
   2052 	struct ifnet *ifp = &sc->sc_if;
   2053 	struct zyd_tx_desc *desc;
   2054 	struct zyd_tx_data *data;
   2055 	struct ieee80211_frame *wh;
   2056 	struct ieee80211_key *k;
   2057 	int xferlen, totlen, rate;
   2058 	uint16_t pktlen;
   2059 	usbd_status error;
   2060 
   2061 	data = &sc->tx_data[0];
   2062 	desc = (struct zyd_tx_desc *)data->buf;
   2063 
   2064 	rate = IEEE80211_IS_CHAN_5GHZ(ic->ic_curchan) ? 12 : 2;
   2065 
   2066 	wh = mtod(m0, struct ieee80211_frame *);
   2067 
   2068 	if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
   2069 		k = ieee80211_crypto_encap(ic, ni, m0);
   2070 		if (k == NULL) {
   2071 			m_freem(m0);
   2072 			return ENOBUFS;
   2073 		}
   2074 	}
   2075 
   2076 	data->ni = ni;
   2077 
   2078 	wh = mtod(m0, struct ieee80211_frame *);
   2079 
   2080 	xferlen = sizeof(struct zyd_tx_desc) + m0->m_pkthdr.len;
   2081 	totlen = m0->m_pkthdr.len + IEEE80211_CRC_LEN;
   2082 
   2083 	/* fill Tx descriptor */
   2084 	desc->len = htole16(totlen);
   2085 
   2086 	desc->flags = ZYD_TX_FLAG_BACKOFF;
   2087 	if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
   2088 		/* multicast frames are not sent at OFDM rates in 802.11b/g */
   2089 		if (totlen > ic->ic_rtsthreshold) {
   2090 			desc->flags |= ZYD_TX_FLAG_RTS;
   2091 		} else if (ZYD_RATE_IS_OFDM(rate) &&
   2092 		    (ic->ic_flags & IEEE80211_F_USEPROT)) {
   2093 			if (ic->ic_protmode == IEEE80211_PROT_CTSONLY)
   2094 				desc->flags |= ZYD_TX_FLAG_CTS_TO_SELF;
   2095 			else if (ic->ic_protmode == IEEE80211_PROT_RTSCTS)
   2096 				desc->flags |= ZYD_TX_FLAG_RTS;
   2097 		}
   2098 	} else
   2099 		desc->flags |= ZYD_TX_FLAG_MULTICAST;
   2100 
   2101 	if ((wh->i_fc[0] &
   2102 	    (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) ==
   2103 	    (IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_PS_POLL))
   2104 		desc->flags |= ZYD_TX_FLAG_TYPE(ZYD_TX_TYPE_PS_POLL);
   2105 
   2106 	desc->phy = zyd_plcp_signal(rate);
   2107 	if (ZYD_RATE_IS_OFDM(rate)) {
   2108 		desc->phy |= ZYD_TX_PHY_OFDM;
   2109 		if (ic->ic_curmode == IEEE80211_MODE_11A)
   2110 			desc->phy |= ZYD_TX_PHY_5GHZ;
   2111 	} else if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE))
   2112 		desc->phy |= ZYD_TX_PHY_SHPREAMBLE;
   2113 
   2114 	/* actual transmit length (XXX why +10?) */
   2115 	pktlen = sizeof(struct zyd_tx_desc) + 10;
   2116 	if (sc->mac_rev == ZYD_ZD1211)
   2117 		pktlen += totlen;
   2118 	desc->pktlen = htole16(pktlen);
   2119 
   2120 	desc->plcp_length = (16 * totlen + rate - 1) / rate;
   2121 	desc->plcp_service = 0;
   2122 	if (rate == 22) {
   2123 		const int remainder = (16 * totlen) % 22;
   2124 		if (remainder != 0 && remainder < 7)
   2125 			desc->plcp_service |= ZYD_PLCP_LENGEXT;
   2126 	}
   2127 
   2128 	if (sc->sc_drvbpf != NULL) {
   2129 		struct zyd_tx_radiotap_header *tap = &sc->sc_txtap;
   2130 
   2131 		tap->wt_flags = 0;
   2132 		tap->wt_rate = rate;
   2133 		tap->wt_chan_freq = htole16(ic->ic_curchan->ic_freq);
   2134 		tap->wt_chan_flags = htole16(ic->ic_curchan->ic_flags);
   2135 
   2136 		bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m0, BPF_D_OUT);
   2137 	}
   2138 
   2139 	m_copydata(m0, 0, m0->m_pkthdr.len,
   2140 	    data->buf + sizeof(struct zyd_tx_desc));
   2141 
   2142 	DPRINTFN(10, ("%s: sending mgt frame len=%zu rate=%u xferlen=%u\n",
   2143 	    device_xname(sc->sc_dev), (size_t)m0->m_pkthdr.len, rate, xferlen));
   2144 
   2145 	m_freem(m0);	/* mbuf no longer needed */
   2146 
   2147 	usbd_setup_xfer(data->xfer, data, data->buf, xferlen,
   2148 	    USBD_FORCE_SHORT_XFER, ZYD_TX_TIMEOUT, zyd_txeof);
   2149 	error = usbd_transfer(data->xfer);
   2150 	if (error != USBD_IN_PROGRESS && error != 0) {
   2151 		if_statinc(ifp, if_oerrors);
   2152 		return EIO;
   2153 	}
   2154 	sc->tx_queued++;
   2155 
   2156 	return 0;
   2157 }
   2158 
   2159 Static void
   2160 zyd_txeof(struct usbd_xfer *xfer, void * priv, usbd_status status)
   2161 {
   2162 	struct zyd_tx_data *data = priv;
   2163 	struct zyd_softc *sc = data->sc;
   2164 	struct ifnet *ifp = &sc->sc_if;
   2165 	int s;
   2166 
   2167 	if (status != USBD_NORMAL_COMPLETION) {
   2168 		if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
   2169 			return;
   2170 
   2171 		printf("%s: could not transmit buffer: %s\n",
   2172 		    device_xname(sc->sc_dev), usbd_errstr(status));
   2173 
   2174 		if (status == USBD_STALLED) {
   2175 			usbd_clear_endpoint_stall_async(
   2176 			    sc->zyd_ep[ZYD_ENDPT_BOUT]);
   2177 		}
   2178 		if_statinc(ifp, if_oerrors);
   2179 		return;
   2180 	}
   2181 
   2182 	s = splnet();
   2183 
   2184 	/* update rate control statistics */
   2185 	((struct zyd_node *)data->ni)->amn.amn_txcnt++;
   2186 
   2187 	ieee80211_free_node(data->ni);
   2188 	data->ni = NULL;
   2189 
   2190 	sc->tx_queued--;
   2191 	if_statinc(ifp, if_opackets);
   2192 
   2193 	sc->tx_timer = 0;
   2194 	ifp->if_flags &= ~IFF_OACTIVE;
   2195 	zyd_start(ifp);
   2196 
   2197 	splx(s);
   2198 }
   2199 
   2200 Static int
   2201 zyd_tx_data(struct zyd_softc *sc, struct mbuf *m0, struct ieee80211_node *ni)
   2202 {
   2203 	struct ieee80211com *ic = &sc->sc_ic;
   2204 	struct ifnet *ifp = &sc->sc_if;
   2205 	struct zyd_tx_desc *desc;
   2206 	struct zyd_tx_data *data;
   2207 	struct ieee80211_frame *wh;
   2208 	struct ieee80211_key *k;
   2209 	int xferlen, totlen, rate;
   2210 	uint16_t pktlen;
   2211 	usbd_status error;
   2212 
   2213 	wh = mtod(m0, struct ieee80211_frame *);
   2214 
   2215 	if (ic->ic_fixed_rate != IEEE80211_FIXED_RATE_NONE)
   2216 		rate = ic->ic_bss->ni_rates.rs_rates[ic->ic_fixed_rate];
   2217 	else
   2218 		rate = ni->ni_rates.rs_rates[ni->ni_txrate];
   2219 	rate &= IEEE80211_RATE_VAL;
   2220 
   2221 	if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
   2222 		k = ieee80211_crypto_encap(ic, ni, m0);
   2223 		if (k == NULL) {
   2224 			m_freem(m0);
   2225 			return ENOBUFS;
   2226 		}
   2227 
   2228 		/* packet header may have moved, reset our local pointer */
   2229 		wh = mtod(m0, struct ieee80211_frame *);
   2230 	}
   2231 
   2232 	data = &sc->tx_data[0];
   2233 	desc = (struct zyd_tx_desc *)data->buf;
   2234 
   2235 	data->ni = ni;
   2236 
   2237 	xferlen = sizeof(struct zyd_tx_desc) + m0->m_pkthdr.len;
   2238 	totlen = m0->m_pkthdr.len + IEEE80211_CRC_LEN;
   2239 
   2240 	/* fill Tx descriptor */
   2241 	desc->len = htole16(totlen);
   2242 
   2243 	desc->flags = ZYD_TX_FLAG_BACKOFF;
   2244 	if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
   2245 		/* multicast frames are not sent at OFDM rates in 802.11b/g */
   2246 		if (totlen > ic->ic_rtsthreshold) {
   2247 			desc->flags |= ZYD_TX_FLAG_RTS;
   2248 		} else if (ZYD_RATE_IS_OFDM(rate) &&
   2249 		    (ic->ic_flags & IEEE80211_F_USEPROT)) {
   2250 			if (ic->ic_protmode == IEEE80211_PROT_CTSONLY)
   2251 				desc->flags |= ZYD_TX_FLAG_CTS_TO_SELF;
   2252 			else if (ic->ic_protmode == IEEE80211_PROT_RTSCTS)
   2253 				desc->flags |= ZYD_TX_FLAG_RTS;
   2254 		}
   2255 	} else
   2256 		desc->flags |= ZYD_TX_FLAG_MULTICAST;
   2257 
   2258 	if ((wh->i_fc[0] &
   2259 	    (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) ==
   2260 	    (IEEE80211_FC0_TYPE_CTL | IEEE80211_FC0_SUBTYPE_PS_POLL))
   2261 		desc->flags |= ZYD_TX_FLAG_TYPE(ZYD_TX_TYPE_PS_POLL);
   2262 
   2263 	desc->phy = zyd_plcp_signal(rate);
   2264 	if (ZYD_RATE_IS_OFDM(rate)) {
   2265 		desc->phy |= ZYD_TX_PHY_OFDM;
   2266 		if (ic->ic_curmode == IEEE80211_MODE_11A)
   2267 			desc->phy |= ZYD_TX_PHY_5GHZ;
   2268 	} else if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE))
   2269 		desc->phy |= ZYD_TX_PHY_SHPREAMBLE;
   2270 
   2271 	/* actual transmit length (XXX why +10?) */
   2272 	pktlen = sizeof(struct zyd_tx_desc) + 10;
   2273 	if (sc->mac_rev == ZYD_ZD1211)
   2274 		pktlen += totlen;
   2275 	desc->pktlen = htole16(pktlen);
   2276 
   2277 	desc->plcp_length = (16 * totlen + rate - 1) / rate;
   2278 	desc->plcp_service = 0;
   2279 	if (rate == 22) {
   2280 		const int remainder = (16 * totlen) % 22;
   2281 		if (remainder != 0 && remainder < 7)
   2282 			desc->plcp_service |= ZYD_PLCP_LENGEXT;
   2283 	}
   2284 
   2285 	if (sc->sc_drvbpf != NULL) {
   2286 		struct zyd_tx_radiotap_header *tap = &sc->sc_txtap;
   2287 
   2288 		tap->wt_flags = 0;
   2289 		tap->wt_rate = rate;
   2290 		tap->wt_chan_freq = htole16(ic->ic_curchan->ic_freq);
   2291 		tap->wt_chan_flags = htole16(ic->ic_curchan->ic_flags);
   2292 
   2293 		bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m0, BPF_D_OUT);
   2294 	}
   2295 
   2296 	m_copydata(m0, 0, m0->m_pkthdr.len,
   2297 	    data->buf + sizeof(struct zyd_tx_desc));
   2298 
   2299 	DPRINTFN(10, ("%s: sending data frame len=%zu rate=%u xferlen=%u\n",
   2300 	    device_xname(sc->sc_dev), (size_t)m0->m_pkthdr.len, rate, xferlen));
   2301 
   2302 	m_freem(m0);	/* mbuf no longer needed */
   2303 
   2304 	usbd_setup_xfer(data->xfer, data, data->buf, xferlen,
   2305 	    USBD_FORCE_SHORT_XFER, ZYD_TX_TIMEOUT, zyd_txeof);
   2306 	error = usbd_transfer(data->xfer);
   2307 	if (error != USBD_IN_PROGRESS && error != 0) {
   2308 		if_statinc(ifp, if_oerrors);
   2309 		return EIO;
   2310 	}
   2311 	sc->tx_queued++;
   2312 
   2313 	return 0;
   2314 }
   2315 
   2316 Static void
   2317 zyd_start(struct ifnet *ifp)
   2318 {
   2319 	struct zyd_softc *sc = ifp->if_softc;
   2320 	struct ieee80211com *ic = &sc->sc_ic;
   2321 	struct ether_header *eh;
   2322 	struct ieee80211_node *ni;
   2323 	struct mbuf *m0;
   2324 
   2325 	for (;;) {
   2326 		IF_POLL(&ic->ic_mgtq, m0);
   2327 		if (m0 != NULL) {
   2328 			if (sc->tx_queued >= ZYD_TX_LIST_CNT) {
   2329 				ifp->if_flags |= IFF_OACTIVE;
   2330 				break;
   2331 			}
   2332 			IF_DEQUEUE(&ic->ic_mgtq, m0);
   2333 
   2334 			ni = M_GETCTX(m0, struct ieee80211_node *);
   2335 			M_CLEARCTX(m0);
   2336 			bpf_mtap3(ic->ic_rawbpf, m0, BPF_D_OUT);
   2337 			if (zyd_tx_mgt(sc, m0, ni) != 0)
   2338 				break;
   2339 		} else {
   2340 			if (ic->ic_state != IEEE80211_S_RUN)
   2341 				break;
   2342 			IFQ_POLL(&ifp->if_snd, m0);
   2343 			if (m0 == NULL)
   2344 				break;
   2345 			if (sc->tx_queued >= ZYD_TX_LIST_CNT) {
   2346 				ifp->if_flags |= IFF_OACTIVE;
   2347 				break;
   2348 			}
   2349 			IFQ_DEQUEUE(&ifp->if_snd, m0);
   2350 
   2351 			if (m0->m_len < sizeof(struct ether_header) &&
   2352 			    !(m0 = m_pullup(m0, sizeof(struct ether_header))))
   2353 				continue;
   2354 
   2355 			eh = mtod(m0, struct ether_header *);
   2356 			ni = ieee80211_find_txnode(ic, eh->ether_dhost);
   2357 			if (ni == NULL) {
   2358 				m_freem(m0);
   2359 				continue;
   2360 			}
   2361 			bpf_mtap(ifp, m0, BPF_D_OUT);
   2362 			if ((m0 = ieee80211_encap(ic, m0, ni)) == NULL) {
   2363 				ieee80211_free_node(ni);
   2364 				if_statinc(ifp, if_oerrors);
   2365 				continue;
   2366 			}
   2367 			bpf_mtap3(ic->ic_rawbpf, m0, BPF_D_OUT);
   2368 			if (zyd_tx_data(sc, m0, ni) != 0) {
   2369 				ieee80211_free_node(ni);
   2370 				if_statinc(ifp, if_oerrors);
   2371 				break;
   2372 			}
   2373 		}
   2374 
   2375 		sc->tx_timer = 5;
   2376 		ifp->if_timer = 1;
   2377 	}
   2378 }
   2379 
   2380 Static void
   2381 zyd_watchdog(struct ifnet *ifp)
   2382 {
   2383 	struct zyd_softc *sc = ifp->if_softc;
   2384 	struct ieee80211com *ic = &sc->sc_ic;
   2385 
   2386 	ifp->if_timer = 0;
   2387 
   2388 	if (sc->tx_timer > 0) {
   2389 		if (--sc->tx_timer == 0) {
   2390 			printf("%s: device timeout\n", device_xname(sc->sc_dev));
   2391 			/* zyd_init(ifp); XXX needs a process context ? */
   2392 			if_statinc(ifp, if_oerrors);
   2393 			return;
   2394 		}
   2395 		ifp->if_timer = 1;
   2396 	}
   2397 
   2398 	ieee80211_watchdog(ic);
   2399 }
   2400 
   2401 Static int
   2402 zyd_ioctl(struct ifnet *ifp, u_long cmd, void *data)
   2403 {
   2404 	struct zyd_softc *sc = ifp->if_softc;
   2405 	struct ieee80211com *ic = &sc->sc_ic;
   2406 	int s, error = 0;
   2407 
   2408 	s = splnet();
   2409 
   2410 	switch (cmd) {
   2411 	case SIOCSIFFLAGS:
   2412 		if ((error = ifioctl_common(ifp, cmd, data)) != 0)
   2413 			break;
   2414 		/* XXX re-use ether_ioctl() */
   2415 		switch (ifp->if_flags & (IFF_UP|IFF_RUNNING)) {
   2416 		case IFF_UP:
   2417 			zyd_init(ifp);
   2418 			break;
   2419 		case IFF_RUNNING:
   2420 			zyd_stop(ifp, 1);
   2421 			break;
   2422 		default:
   2423 			break;
   2424 		}
   2425 		break;
   2426 
   2427 	default:
   2428 		error = ieee80211_ioctl(ic, cmd, data);
   2429 	}
   2430 
   2431 	if (error == ENETRESET) {
   2432 		if ((ifp->if_flags & (IFF_RUNNING | IFF_UP)) ==
   2433 		    (IFF_RUNNING | IFF_UP))
   2434 			zyd_init(ifp);
   2435 		error = 0;
   2436 	}
   2437 
   2438 	splx(s);
   2439 
   2440 	return error;
   2441 }
   2442 
   2443 Static int
   2444 zyd_init(struct ifnet *ifp)
   2445 {
   2446 	struct zyd_softc *sc = ifp->if_softc;
   2447 	struct ieee80211com *ic = &sc->sc_ic;
   2448 	int i, error;
   2449 
   2450 	zyd_stop(ifp, 0);
   2451 
   2452 	IEEE80211_ADDR_COPY(ic->ic_myaddr, CLLADDR(ifp->if_sadl));
   2453 	DPRINTF(("setting MAC address to %s\n", ether_sprintf(ic->ic_myaddr)));
   2454 	error = zyd_set_macaddr(sc, ic->ic_myaddr);
   2455 	if (error != 0)
   2456 		return error;
   2457 
   2458 	/* we'll do software WEP decryption for now */
   2459 	DPRINTF(("setting encryption type\n"));
   2460 	error = zyd_write32(sc, ZYD_MAC_ENCRYPTION_TYPE, ZYD_ENC_SNIFFER);
   2461 	if (error != 0)
   2462 		return error;
   2463 
   2464 	/* promiscuous mode */
   2465 	(void)zyd_write32(sc, ZYD_MAC_SNIFFER,
   2466 	    (ic->ic_opmode == IEEE80211_M_MONITOR) ? 1 : 0);
   2467 
   2468 	(void)zyd_set_rxfilter(sc);
   2469 
   2470 	/* switch radio transmitter ON */
   2471 	(void)zyd_switch_radio(sc, 1);
   2472 
   2473 	/* set basic rates */
   2474 	if (ic->ic_curmode == IEEE80211_MODE_11B)
   2475 		(void)zyd_write32(sc, ZYD_MAC_BAS_RATE, 0x0003);
   2476 	else if (ic->ic_curmode == IEEE80211_MODE_11A)
   2477 		(void)zyd_write32(sc, ZYD_MAC_BAS_RATE, 0x1500);
   2478 	else	/* assumes 802.11b/g */
   2479 		(void)zyd_write32(sc, ZYD_MAC_BAS_RATE, 0x000f);
   2480 
   2481 	/* set mandatory rates */
   2482 	if (ic->ic_curmode == IEEE80211_MODE_11B)
   2483 		(void)zyd_write32(sc, ZYD_MAC_MAN_RATE, 0x000f);
   2484 	else if (ic->ic_curmode == IEEE80211_MODE_11A)
   2485 		(void)zyd_write32(sc, ZYD_MAC_MAN_RATE, 0x1500);
   2486 	else	/* assumes 802.11b/g */
   2487 		(void)zyd_write32(sc, ZYD_MAC_MAN_RATE, 0x150f);
   2488 
   2489 	/* set default BSS channel */
   2490 	ic->ic_bss->ni_chan = ic->ic_ibss_chan;
   2491 	zyd_set_chan(sc, ic->ic_bss->ni_chan);
   2492 
   2493 	/* enable interrupts */
   2494 	(void)zyd_write32(sc, ZYD_CR_INTERRUPT, ZYD_HWINT_MASK);
   2495 
   2496 	/*
   2497 	 * Allocate Tx and Rx xfer queues.
   2498 	 */
   2499 	if ((error = zyd_alloc_tx_list(sc)) != 0) {
   2500 		printf("%s: could not allocate Tx list\n",
   2501 		    device_xname(sc->sc_dev));
   2502 		goto fail;
   2503 	}
   2504 	if ((error = zyd_alloc_rx_list(sc)) != 0) {
   2505 		printf("%s: could not allocate Rx list\n",
   2506 		    device_xname(sc->sc_dev));
   2507 		goto fail;
   2508 	}
   2509 
   2510 	/*
   2511 	 * Start up the receive pipe.
   2512 	 */
   2513 	for (i = 0; i < ZYD_RX_LIST_CNT; i++) {
   2514 		struct zyd_rx_data *data = &sc->rx_data[i];
   2515 
   2516 		usbd_setup_xfer(data->xfer, data, NULL, ZYX_MAX_RXBUFSZ,
   2517 		    USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, zyd_rxeof);
   2518 		error = usbd_transfer(data->xfer);
   2519 		if (error != USBD_IN_PROGRESS && error != 0) {
   2520 			printf("%s: could not queue Rx transfer\n",
   2521 			    device_xname(sc->sc_dev));
   2522 			goto fail;
   2523 		}
   2524 	}
   2525 
   2526 	ifp->if_flags &= ~IFF_OACTIVE;
   2527 	ifp->if_flags |= IFF_RUNNING;
   2528 
   2529 	if (ic->ic_opmode == IEEE80211_M_MONITOR)
   2530 		ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
   2531 	else
   2532 		ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
   2533 
   2534 	return 0;
   2535 
   2536 fail:	zyd_stop(ifp, 1);
   2537 	return error;
   2538 }
   2539 
   2540 Static void
   2541 zyd_stop(struct ifnet *ifp, int disable)
   2542 {
   2543 	struct zyd_softc *sc = ifp->if_softc;
   2544 	struct ieee80211com *ic = &sc->sc_ic;
   2545 
   2546 	ieee80211_new_state(ic, IEEE80211_S_INIT, -1);	/* free all nodes */
   2547 
   2548 	sc->tx_timer = 0;
   2549 	ifp->if_timer = 0;
   2550 	ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
   2551 
   2552 	/* switch radio transmitter OFF */
   2553 	(void)zyd_switch_radio(sc, 0);
   2554 
   2555 	/* disable Rx */
   2556 	(void)zyd_write32(sc, ZYD_MAC_RXFILTER, 0);
   2557 
   2558 	/* disable interrupts */
   2559 	(void)zyd_write32(sc, ZYD_CR_INTERRUPT, 0);
   2560 
   2561 	usbd_abort_pipe(sc->zyd_ep[ZYD_ENDPT_BIN]);
   2562 	usbd_abort_pipe(sc->zyd_ep[ZYD_ENDPT_BOUT]);
   2563 
   2564 	zyd_free_rx_list(sc);
   2565 	zyd_free_tx_list(sc);
   2566 }
   2567 
   2568 Static int
   2569 zyd_loadfirmware(struct zyd_softc *sc, u_char *fw, size_t size)
   2570 {
   2571 	usb_device_request_t req;
   2572 	uint16_t addr;
   2573 	uint8_t stat;
   2574 
   2575 	DPRINTF(("firmware size=%zu\n", size));
   2576 
   2577 	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
   2578 	req.bRequest = ZYD_DOWNLOADREQ;
   2579 	USETW(req.wIndex, 0);
   2580 
   2581 	addr = ZYD_FIRMWARE_START_ADDR;
   2582 	while (size > 0) {
   2583 #if 0
   2584 		const int mlen = uimin(size, 4096);
   2585 #else
   2586 		/*
   2587 		 * XXXX: When the transfer size is 4096 bytes, it is not
   2588 		 * likely to be able to transfer it.
   2589 		 * The cause is port or machine or chip?
   2590 		 */
   2591 		const int mlen = uimin(size, 64);
   2592 #endif
   2593 
   2594 		DPRINTF(("loading firmware block: len=%d, addr=%#x\n", mlen,
   2595 		    addr));
   2596 
   2597 		USETW(req.wValue, addr);
   2598 		USETW(req.wLength, mlen);
   2599 		if (usbd_do_request(sc->sc_udev, &req, fw) != 0)
   2600 			return EIO;
   2601 
   2602 		addr += mlen / 2;
   2603 		fw   += mlen;
   2604 		size -= mlen;
   2605 	}
   2606 
   2607 	/* check whether the upload succeeded */
   2608 	req.bmRequestType = UT_READ_VENDOR_DEVICE;
   2609 	req.bRequest = ZYD_DOWNLOADSTS;
   2610 	USETW(req.wValue, 0);
   2611 	USETW(req.wIndex, 0);
   2612 	USETW(req.wLength, sizeof(stat));
   2613 	if (usbd_do_request(sc->sc_udev, &req, &stat) != 0)
   2614 		return EIO;
   2615 
   2616 	return (stat & 0x80) ? EIO : 0;
   2617 }
   2618 
   2619 Static void
   2620 zyd_iter_func(void *arg, struct ieee80211_node *ni)
   2621 {
   2622 	struct zyd_softc *sc = arg;
   2623 	struct zyd_node *zn = (struct zyd_node *)ni;
   2624 
   2625 	ieee80211_amrr_choose(&sc->amrr, ni, &zn->amn);
   2626 }
   2627 
   2628 Static void
   2629 zyd_amrr_timeout(void *arg)
   2630 {
   2631 	struct zyd_softc *sc = arg;
   2632 	struct ieee80211com *ic = &sc->sc_ic;
   2633 	int s;
   2634 
   2635 	s = splnet();
   2636 	if (ic->ic_opmode == IEEE80211_M_STA)
   2637 		zyd_iter_func(sc, ic->ic_bss);
   2638 	else
   2639 		ieee80211_iterate_nodes(&ic->ic_sta, zyd_iter_func, sc);
   2640 	splx(s);
   2641 
   2642 	callout_reset(&sc->sc_amrr_ch, hz, zyd_amrr_timeout, sc);
   2643 }
   2644 
   2645 Static void
   2646 zyd_newassoc(struct ieee80211_node *ni, int isnew)
   2647 {
   2648 	struct zyd_softc *sc = ni->ni_ic->ic_ifp->if_softc;
   2649 	int i;
   2650 
   2651 	ieee80211_amrr_node_init(&sc->amrr, &((struct zyd_node *)ni)->amn);
   2652 
   2653 	/* set rate to some reasonable initial value */
   2654 	for (i = ni->ni_rates.rs_nrates - 1;
   2655 	     i > 0 && (ni->ni_rates.rs_rates[i] & IEEE80211_RATE_VAL) > 72;
   2656 	     i--);
   2657 	ni->ni_txrate = i;
   2658 }
   2659 
   2660 static int
   2661 zyd_activate(device_t self, enum devact act)
   2662 {
   2663 	struct zyd_softc *sc = device_private(self);
   2664 
   2665 	switch (act) {
   2666 	case DVACT_DEACTIVATE:
   2667 		if_deactivate(&sc->sc_if);
   2668 		return 0;
   2669 	default:
   2670 		return EOPNOTSUPP;
   2671 	}
   2672 }
   2673