Searched hist:1.1522 (Results 1 - 5 of 5) sorted by relevance

/src/doc/
H A D3RDPARTY1.1522 Fri May 04 15:51:53 GMT 2018 christos new tzcode.
H A DCHANGES1.1522 Tue Mar 15 14:37:21 GMT 2011 joerg Add SH3 and x86 for the TLS support
/src/distrib/sets/lists/man/
H A Dmi1.1522 Sat Apr 02 16:18:54 GMT 2016 kamil Add malloc.conf.0 to fix build with MKCATPAGES
/src/sys/dev/pci/
H A Dpcidevs1.1522 Sun Apr 20 09:44:40 GMT 2025 andvar viaide(4): Improve VT8251 integrated SATA controller support in IDE/RAID modes.

Use via_chip_map() to attach this controller in IDE and RAID modes, similarly
to VX800. This allows drives to be identified and attached successfully on all
four ports (two channels with master/slave ports).

Switch channel setup to sata_setup_channel(), replacing via_setup_channel().
This avoids writes to the 0x50 register, which is only relevant for IDE
controllers. Writes to SATA controller registers caused drives on the IDE
controller (0x0571) to fail to attach. Apply this fix also to VX900 and VT8261.

Rename VT8237R_SATA to VT8251_SATA (0x3349 is not used for VT8237R, AFAIK).
This PCI ID is used in RAID mode on newer (CE) chipset revision and in all
modes (IDE/RAID/AHCI) on older revision.
Add the 0x5287 PCI ID, used in IDE mode on newer (CE) chipset revision.
Rename VT8251_SATA to VT8251_AHCI (0x6287 is used only in AHCI mode).
Add VT8251_AHCI to the ahcisata(4) quirk list, same as VT8251_SATA.

For more details, see the tech-kern thread:
https://mail-index.netbsd.org/tech-kern/2025/04/13/msg030365.html

Should fix and close PR kern/37517.

Tested on Asus A8V-VM (CD) and MSI MS-7318 (CE) motherboards.

Reviewed by bad.
/src/distrib/sets/lists/comp/
H A Dmi1.1522 Thu Nov 04 21:15:55 GMT 2010 pooka Add rumpclient to setlists.

You know, I used to think setlists were ridiculous back when ~20
entries per lib were required. It seems we're up to 47 and I've
long since run out of superlatives to describe the situation.

Completed in 606 milliseconds