HomeSort by: relevance | last modified time | path
    Searched hist:1.693 (Results 1 - 25 of 34) sorted by relevancy

1 2

  /src/share/man/man4/
aq.4 1.4.2.2 Tue Jul 07 10:29:06 UTC 2020 martin Pull up following revision(s) (requested by jmcneill in ticket #980):

sys/dev/pci/if_aq.c: revision 1.4
sys/dev/pci/if_aq.c: revision 1.5
sys/arch/amd64/conf/GENERIC: revision 1.553
sys/dev/pci/files.pci: revision 1.419
sys/arch/amd64/conf/XEN3_DOM0: revision 1.170
sys/dev/pci/if_aq.c: revision 1.9
share/man/man4/Makefile: revision 1.693
sys/dev/pci/pcidevs: revision 1.1411
share/man/man4/aq.4: revision 1.1
share/man/man4/aq.4: revision 1.3
sys/arch/i386/conf/ALL: revision 1.479
share/man/man4/aq.4: revision 1.4
sys/dev/pci/if_aq.c: revision 1.10
sys/dev/pci/files.pci: revision 1.421
sys/dev/pci/if_aq.c: revision 1.11
sys/dev/pci/if_aq.c: revision 1.12
sys/dev/pci/if_aq.c: revision 1.13
sys/dev/pci/if_aq.c: revision 1.14
sys/dev/pci/if_aq.c: revision 1.15
sys/dev/pci/if_aq.c: revision 1.16
sys/dev/pci/pcidevs: revision 1.1408
sys/arch/amd64/conf/ALL: revision 1.135
sys/net/ethertypes.h: revision 1.19
sys/arch/i386/conf/GENERIC: revision 1.1218
distrib/sets/lists/man/mi: revision 1.1668
sys/dev/pci/if_aq.c: revision 1.1
sys/dev/pci/if_aq.c: revision 1.2
sys/dev/pci/pcidevs: revision 1.1395
sys/dev/pci/if_aq.c: revision 1.3
sys/arch/evbarm/conf/GENERIC64: revision 1.125

Add the ETHERTYPE_QINQ for 802.1ad VLAN stacking

add Aquantia AQC 10G network adapters
add support Aquantia AQC seriese 10G network adapters.

this driver is based on the FreeBSD version https://github.com/Aquantia/aqtion-freebsd ,
but drastically rewritten for NetBSD.

add aq(4)

Add Aquantia AQC100, AQC100S and D100.

add support VLAN HW filter

set/clear IFF_OACTIVE flag only on txring 0

make counters per queue

support internal PHY temperature sensor

Found by kUBSan:
- Use unsigned to avoid undefined behavior in aq_hw_init().
- Cast to unsigned to avoid undefined behavior in aq_set_mac_addr().

fix descriptions of register map in comment

return the ifmedia active status correctly even while the link is not up after attach.
pointed out by msaitoh@. thanks.

On FIBRE devices, there are times when linkstat interrupt doesn't occur?
reported from Andrius V. thanks.
- use polling instead of linkstat interrupt when FIBRE
- add AQ_FORCE_POLL_LINKSTAT options (not by default)

sort product table, and tabify

add support AQC100S and D100.
not tested, but they are probably the same as the AQC100.

wm.4 1.36.4.3 Sat Oct 23 11:49:22 UTC 2021 martin Pull up the following, requested by msaitoh in ticket #1701:

share/man/man4/wm.4 1.42
sys/dev/pci/files.pci 1.434
sys/dev/pci/if_wm.c 1.686-1.687,1.692-1.693,
1.697,1.699-1.703,
1.706-1.715 via patch
sys/dev/pci/if_wmvar.h 1.46

- Add missing drain for pcq in wm_stop_locked().
- Add support for I219V 15-19 and I219LM 16-19.
- Fix Tx stall.
- Use wm_flush_desc_rings() workaround more on I219.
- Change DMA physical address in wm_flush_desc_rings() to match other
OSes.
- Check return value correctly in wm_lv_jumbo_workaround_ich8lan().
- Add new sysctl hw.wmN.debug_flags. This sysctl can be used if
WM_DEBUG is set.
- Add some sysctl values for debugging TX/RX queues.
- WM_EVENT_COUNTER is enabled by default on 64 bit architectures.
- Remove extra unlock/lock processing around if_percpuq_enqueue().
- Refactor rxq->rxq_ptr updating.
- Stop legacy interrupts before calling softint.
- Disable printf()s in wm_flush_desc_rings() because the code is
verified.
- Print I219's version number.
- Uniform INTx/MSI handler's Tx/Rx behavior to MSI-X's one.
- Fix return value of interrupt handler.
- Only print an error about missing I/O BARs for chips that need it.
- Do not return a void value from a void function.
- Add new flag named WM_F_CRC_STRIP and use it. No functional change.
- Whitespace fixes. Fix comments. No functional change.

1.40.4.1 Thu Oct 21 14:30:10 UTC 2021 martin Pull up the following, requested by msaitoh in ticket #1363:

share/man/man4/wm.4 1.42
sys/dev/pci/files.pci 1.434
sys/dev/pci/if_wm.c 1.690,1.692-1.693,1.697-1.704,
1.706-1.715 via patch

- Add missing drain for pcq in wm_stop_locked().
- Add support for I219V 15-19 and I219LM 16-19.
- Fix Tx stall.
- Use wm_flush_desc_rings() workaround more on I219.
- Change DMA physical address in wm_flush_desc_rings() to match other
OSes.
- Check return value correctly in wm_lv_jumbo_workaround_ich8lan().
- Add new sysctl hw.wmN.debug_flags. This sysctl can be used if
WM_DEBUG is set.
- Add some sysctl values for debugging TX/RX queues.
- Use atomic_{load,store}_relaxed for evcnt 64 bit counter.
- WM_EVENT_COUNTER is enabled by default on 64 bit architectures.
- Remove extra unlock/lock processing around if_percpuq_enqueue().
- Refactor rxq->rxq_ptr updating.
- Stop legacy interrupts before calling softint.
- Disable printf()s in wm_flush_desc_rings() because the code is
verified.
- Print I219's version number.
- Uniform INTx/MSI handler's Tx/Rx behavior to MSI-X's one.
- Fix return value of interrupt handler.
- Only print an error about missing I/O BARs for chips that need it.
- Do not return a void value from a void function.
- Fix comment.
- Whitespace fixes. No functional change.

Makefile 1.693 Wed Jan 01 10:11:21 UTC 2020 ryo add support Aquantia AQC seriese 10G network adapters.

this driver is based on the FreeBSD version https://github.com/Aquantia/aqtion-freebsd ,
but drastically rewritten for NetBSD.
1.680.2.5 Tue Jul 07 10:29:05 UTC 2020 martin Pull up following revision(s) (requested by jmcneill in ticket #980):

sys/dev/pci/if_aq.c: revision 1.4
sys/dev/pci/if_aq.c: revision 1.5
sys/arch/amd64/conf/GENERIC: revision 1.553
sys/dev/pci/files.pci: revision 1.419
sys/arch/amd64/conf/XEN3_DOM0: revision 1.170
sys/dev/pci/if_aq.c: revision 1.9
share/man/man4/Makefile: revision 1.693
sys/dev/pci/pcidevs: revision 1.1411
share/man/man4/aq.4: revision 1.1
share/man/man4/aq.4: revision 1.3
sys/arch/i386/conf/ALL: revision 1.479
share/man/man4/aq.4: revision 1.4
sys/dev/pci/if_aq.c: revision 1.10
sys/dev/pci/files.pci: revision 1.421
sys/dev/pci/if_aq.c: revision 1.11
sys/dev/pci/if_aq.c: revision 1.12
sys/dev/pci/if_aq.c: revision 1.13
sys/dev/pci/if_aq.c: revision 1.14
sys/dev/pci/if_aq.c: revision 1.15
sys/dev/pci/if_aq.c: revision 1.16
sys/dev/pci/pcidevs: revision 1.1408
sys/arch/amd64/conf/ALL: revision 1.135
sys/net/ethertypes.h: revision 1.19
sys/arch/i386/conf/GENERIC: revision 1.1218
distrib/sets/lists/man/mi: revision 1.1668
sys/dev/pci/if_aq.c: revision 1.1
sys/dev/pci/if_aq.c: revision 1.2
sys/dev/pci/pcidevs: revision 1.1395
sys/dev/pci/if_aq.c: revision 1.3
sys/arch/evbarm/conf/GENERIC64: revision 1.125

Add the ETHERTYPE_QINQ for 802.1ad VLAN stacking

add Aquantia AQC 10G network adapters
add support Aquantia AQC seriese 10G network adapters.

this driver is based on the FreeBSD version https://github.com/Aquantia/aqtion-freebsd ,
but drastically rewritten for NetBSD.

add aq(4)

Add Aquantia AQC100, AQC100S and D100.

add support VLAN HW filter

set/clear IFF_OACTIVE flag only on txring 0

make counters per queue

support internal PHY temperature sensor

Found by kUBSan:
- Use unsigned to avoid undefined behavior in aq_hw_init().
- Cast to unsigned to avoid undefined behavior in aq_set_mac_addr().

fix descriptions of register map in comment

return the ifmedia active status correctly even while the link is not up after attach.
pointed out by msaitoh@. thanks.

On FIBRE devices, there are times when linkstat interrupt doesn't occur?
reported from Andrius V. thanks.
- use polling instead of linkstat interrupt when FIBRE
- add AQ_FORCE_POLL_LINKSTAT options (not by default)

sort product table, and tabify

add support AQC100S and D100.
not tested, but they are probably the same as the AQC100.
  /src/sys/net/
ethertypes.h 1.18.42.1 Tue Jul 07 10:29:06 UTC 2020 martin Pull up following revision(s) (requested by jmcneill in ticket #980):

sys/dev/pci/if_aq.c: revision 1.4
sys/dev/pci/if_aq.c: revision 1.5
sys/arch/amd64/conf/GENERIC: revision 1.553
sys/dev/pci/files.pci: revision 1.419
sys/arch/amd64/conf/XEN3_DOM0: revision 1.170
sys/dev/pci/if_aq.c: revision 1.9
share/man/man4/Makefile: revision 1.693
sys/dev/pci/pcidevs: revision 1.1411
share/man/man4/aq.4: revision 1.1
share/man/man4/aq.4: revision 1.3
sys/arch/i386/conf/ALL: revision 1.479
share/man/man4/aq.4: revision 1.4
sys/dev/pci/if_aq.c: revision 1.10
sys/dev/pci/files.pci: revision 1.421
sys/dev/pci/if_aq.c: revision 1.11
sys/dev/pci/if_aq.c: revision 1.12
sys/dev/pci/if_aq.c: revision 1.13
sys/dev/pci/if_aq.c: revision 1.14
sys/dev/pci/if_aq.c: revision 1.15
sys/dev/pci/if_aq.c: revision 1.16
sys/dev/pci/pcidevs: revision 1.1408
sys/arch/amd64/conf/ALL: revision 1.135
sys/net/ethertypes.h: revision 1.19
sys/arch/i386/conf/GENERIC: revision 1.1218
distrib/sets/lists/man/mi: revision 1.1668
sys/dev/pci/if_aq.c: revision 1.1
sys/dev/pci/if_aq.c: revision 1.2
sys/dev/pci/pcidevs: revision 1.1395
sys/dev/pci/if_aq.c: revision 1.3
sys/arch/evbarm/conf/GENERIC64: revision 1.125

Add the ETHERTYPE_QINQ for 802.1ad VLAN stacking

add Aquantia AQC 10G network adapters
add support Aquantia AQC seriese 10G network adapters.

this driver is based on the FreeBSD version https://github.com/Aquantia/aqtion-freebsd ,
but drastically rewritten for NetBSD.

add aq(4)

Add Aquantia AQC100, AQC100S and D100.

add support VLAN HW filter

set/clear IFF_OACTIVE flag only on txring 0

make counters per queue

support internal PHY temperature sensor

Found by kUBSan:
- Use unsigned to avoid undefined behavior in aq_hw_init().
- Cast to unsigned to avoid undefined behavior in aq_set_mac_addr().

fix descriptions of register map in comment

return the ifmedia active status correctly even while the link is not up after attach.
pointed out by msaitoh@. thanks.

On FIBRE devices, there are times when linkstat interrupt doesn't occur?
reported from Andrius V. thanks.
- use polling instead of linkstat interrupt when FIBRE
- add AQ_FORCE_POLL_LINKSTAT options (not by default)

sort product table, and tabify

add support AQC100S and D100.
not tested, but they are probably the same as the AQC100.

  /src/sys/dev/pci/
if_aq.c 1.17.2.2 Tue Jul 07 10:29:05 UTC 2020 martin Pull up following revision(s) (requested by jmcneill in ticket #980):

sys/dev/pci/if_aq.c: revision 1.4
sys/dev/pci/if_aq.c: revision 1.5
sys/arch/amd64/conf/GENERIC: revision 1.553
sys/dev/pci/files.pci: revision 1.419
sys/arch/amd64/conf/XEN3_DOM0: revision 1.170
sys/dev/pci/if_aq.c: revision 1.9
share/man/man4/Makefile: revision 1.693
sys/dev/pci/pcidevs: revision 1.1411
share/man/man4/aq.4: revision 1.1
share/man/man4/aq.4: revision 1.3
sys/arch/i386/conf/ALL: revision 1.479
share/man/man4/aq.4: revision 1.4
sys/dev/pci/if_aq.c: revision 1.10
sys/dev/pci/files.pci: revision 1.421
sys/dev/pci/if_aq.c: revision 1.11
sys/dev/pci/if_aq.c: revision 1.12
sys/dev/pci/if_aq.c: revision 1.13
sys/dev/pci/if_aq.c: revision 1.14
sys/dev/pci/if_aq.c: revision 1.15
sys/dev/pci/if_aq.c: revision 1.16
sys/dev/pci/pcidevs: revision 1.1408
sys/arch/amd64/conf/ALL: revision 1.135
sys/net/ethertypes.h: revision 1.19
sys/arch/i386/conf/GENERIC: revision 1.1218
distrib/sets/lists/man/mi: revision 1.1668
sys/dev/pci/if_aq.c: revision 1.1
sys/dev/pci/if_aq.c: revision 1.2
sys/dev/pci/pcidevs: revision 1.1395
sys/dev/pci/if_aq.c: revision 1.3
sys/arch/evbarm/conf/GENERIC64: revision 1.125

Add the ETHERTYPE_QINQ for 802.1ad VLAN stacking

add Aquantia AQC 10G network adapters
add support Aquantia AQC seriese 10G network adapters.

this driver is based on the FreeBSD version https://github.com/Aquantia/aqtion-freebsd ,
but drastically rewritten for NetBSD.

add aq(4)

Add Aquantia AQC100, AQC100S and D100.

add support VLAN HW filter

set/clear IFF_OACTIVE flag only on txring 0

make counters per queue

support internal PHY temperature sensor

Found by kUBSan:
- Use unsigned to avoid undefined behavior in aq_hw_init().
- Cast to unsigned to avoid undefined behavior in aq_set_mac_addr().

fix descriptions of register map in comment

return the ifmedia active status correctly even while the link is not up after attach.
pointed out by msaitoh@. thanks.

On FIBRE devices, there are times when linkstat interrupt doesn't occur?
reported from Andrius V. thanks.
- use polling instead of linkstat interrupt when FIBRE
- add AQ_FORCE_POLL_LINKSTAT options (not by default)

sort product table, and tabify

add support AQC100S and D100.
not tested, but they are probably the same as the AQC100.
files.pci 1.388.4.7 Sat Oct 23 11:49:22 UTC 2021 martin Pull up the following, requested by msaitoh in ticket #1701:

share/man/man4/wm.4 1.42
sys/dev/pci/files.pci 1.434
sys/dev/pci/if_wm.c 1.686-1.687,1.692-1.693,
1.697,1.699-1.703,
1.706-1.715 via patch
sys/dev/pci/if_wmvar.h 1.46

- Add missing drain for pcq in wm_stop_locked().
- Add support for I219V 15-19 and I219LM 16-19.
- Fix Tx stall.
- Use wm_flush_desc_rings() workaround more on I219.
- Change DMA physical address in wm_flush_desc_rings() to match other
OSes.
- Check return value correctly in wm_lv_jumbo_workaround_ich8lan().
- Add new sysctl hw.wmN.debug_flags. This sysctl can be used if
WM_DEBUG is set.
- Add some sysctl values for debugging TX/RX queues.
- WM_EVENT_COUNTER is enabled by default on 64 bit architectures.
- Remove extra unlock/lock processing around if_percpuq_enqueue().
- Refactor rxq->rxq_ptr updating.
- Stop legacy interrupts before calling softint.
- Disable printf()s in wm_flush_desc_rings() because the code is
verified.
- Print I219's version number.
- Uniform INTx/MSI handler's Tx/Rx behavior to MSI-X's one.
- Fix return value of interrupt handler.
- Only print an error about missing I/O BARs for chips that need it.
- Do not return a void value from a void function.
- Add new flag named WM_F_CRC_STRIP and use it. No functional change.
- Whitespace fixes. Fix comments. No functional change.
1.413.2.5 Thu Oct 21 14:30:10 UTC 2021 martin Pull up the following, requested by msaitoh in ticket #1363:

share/man/man4/wm.4 1.42
sys/dev/pci/files.pci 1.434
sys/dev/pci/if_wm.c 1.690,1.692-1.693,1.697-1.704,
1.706-1.715 via patch

- Add missing drain for pcq in wm_stop_locked().
- Add support for I219V 15-19 and I219LM 16-19.
- Fix Tx stall.
- Use wm_flush_desc_rings() workaround more on I219.
- Change DMA physical address in wm_flush_desc_rings() to match other
OSes.
- Check return value correctly in wm_lv_jumbo_workaround_ich8lan().
- Add new sysctl hw.wmN.debug_flags. This sysctl can be used if
WM_DEBUG is set.
- Add some sysctl values for debugging TX/RX queues.
- Use atomic_{load,store}_relaxed for evcnt 64 bit counter.
- WM_EVENT_COUNTER is enabled by default on 64 bit architectures.
- Remove extra unlock/lock processing around if_percpuq_enqueue().
- Refactor rxq->rxq_ptr updating.
- Stop legacy interrupts before calling softint.
- Disable printf()s in wm_flush_desc_rings() because the code is
verified.
- Print I219's version number.
- Uniform INTx/MSI handler's Tx/Rx behavior to MSI-X's one.
- Fix return value of interrupt handler.
- Only print an error about missing I/O BARs for chips that need it.
- Do not return a void value from a void function.
- Fix comment.
- Whitespace fixes. No functional change.
1.413.2.2 Tue Jul 07 10:29:05 UTC 2020 martin Pull up following revision(s) (requested by jmcneill in ticket #980):

sys/dev/pci/if_aq.c: revision 1.4
sys/dev/pci/if_aq.c: revision 1.5
sys/arch/amd64/conf/GENERIC: revision 1.553
sys/dev/pci/files.pci: revision 1.419
sys/arch/amd64/conf/XEN3_DOM0: revision 1.170
sys/dev/pci/if_aq.c: revision 1.9
share/man/man4/Makefile: revision 1.693
sys/dev/pci/pcidevs: revision 1.1411
share/man/man4/aq.4: revision 1.1
share/man/man4/aq.4: revision 1.3
sys/arch/i386/conf/ALL: revision 1.479
share/man/man4/aq.4: revision 1.4
sys/dev/pci/if_aq.c: revision 1.10
sys/dev/pci/files.pci: revision 1.421
sys/dev/pci/if_aq.c: revision 1.11
sys/dev/pci/if_aq.c: revision 1.12
sys/dev/pci/if_aq.c: revision 1.13
sys/dev/pci/if_aq.c: revision 1.14
sys/dev/pci/if_aq.c: revision 1.15
sys/dev/pci/if_aq.c: revision 1.16
sys/dev/pci/pcidevs: revision 1.1408
sys/arch/amd64/conf/ALL: revision 1.135
sys/net/ethertypes.h: revision 1.19
sys/arch/i386/conf/GENERIC: revision 1.1218
distrib/sets/lists/man/mi: revision 1.1668
sys/dev/pci/if_aq.c: revision 1.1
sys/dev/pci/if_aq.c: revision 1.2
sys/dev/pci/pcidevs: revision 1.1395
sys/dev/pci/if_aq.c: revision 1.3
sys/arch/evbarm/conf/GENERIC64: revision 1.125

Add the ETHERTYPE_QINQ for 802.1ad VLAN stacking

add Aquantia AQC 10G network adapters
add support Aquantia AQC seriese 10G network adapters.

this driver is based on the FreeBSD version https://github.com/Aquantia/aqtion-freebsd ,
but drastically rewritten for NetBSD.

add aq(4)

Add Aquantia AQC100, AQC100S and D100.

add support VLAN HW filter

set/clear IFF_OACTIVE flag only on txring 0

make counters per queue

support internal PHY temperature sensor

Found by kUBSan:
- Use unsigned to avoid undefined behavior in aq_hw_init().
- Cast to unsigned to avoid undefined behavior in aq_set_mac_addr().

fix descriptions of register map in comment

return the ifmedia active status correctly even while the link is not up after attach.
pointed out by msaitoh@. thanks.

On FIBRE devices, there are times when linkstat interrupt doesn't occur?
reported from Andrius V. thanks.
- use polling instead of linkstat interrupt when FIBRE
- add AQ_FORCE_POLL_LINKSTAT options (not by default)

sort product table, and tabify

add support AQC100S and D100.
not tested, but they are probably the same as the AQC100.
if_wmvar.h 1.33.6.8 Sat Oct 23 11:49:22 UTC 2021 martin Pull up the following, requested by msaitoh in ticket #1701:

share/man/man4/wm.4 1.42
sys/dev/pci/files.pci 1.434
sys/dev/pci/if_wm.c 1.686-1.687,1.692-1.693,
1.697,1.699-1.703,
1.706-1.715 via patch
sys/dev/pci/if_wmvar.h 1.46

- Add missing drain for pcq in wm_stop_locked().
- Add support for I219V 15-19 and I219LM 16-19.
- Fix Tx stall.
- Use wm_flush_desc_rings() workaround more on I219.
- Change DMA physical address in wm_flush_desc_rings() to match other
OSes.
- Check return value correctly in wm_lv_jumbo_workaround_ich8lan().
- Add new sysctl hw.wmN.debug_flags. This sysctl can be used if
WM_DEBUG is set.
- Add some sysctl values for debugging TX/RX queues.
- WM_EVENT_COUNTER is enabled by default on 64 bit architectures.
- Remove extra unlock/lock processing around if_percpuq_enqueue().
- Refactor rxq->rxq_ptr updating.
- Stop legacy interrupts before calling softint.
- Disable printf()s in wm_flush_desc_rings() because the code is
verified.
- Print I219's version number.
- Uniform INTx/MSI handler's Tx/Rx behavior to MSI-X's one.
- Fix return value of interrupt handler.
- Only print an error about missing I/O BARs for chips that need it.
- Do not return a void value from a void function.
- Add new flag named WM_F_CRC_STRIP and use it. No functional change.
- Whitespace fixes. Fix comments. No functional change.
if_wm.c 1.693 Fri Oct 30 06:23:39 UTC 2020 msaitoh Add new sysctl hw.wmN.debug_flags. This sysctl can be used if WM_DEBUG is set.
OK'd by knakahara.

% sysctl -d hw.wm0.debug_flags
hw.wm0.debug_flags: Debug flags:
0x01 LINK
0x02 TX
0x04 RX
0x08 GMII
0x10 MANAGE
0x20 NVM
0x40 INIT
0x80 LOCK
1.508.4.43 Sat Oct 23 11:49:22 UTC 2021 martin Pull up the following, requested by msaitoh in ticket #1701:

share/man/man4/wm.4 1.42
sys/dev/pci/files.pci 1.434
sys/dev/pci/if_wm.c 1.686-1.687,1.692-1.693,
1.697,1.699-1.703,
1.706-1.715 via patch
sys/dev/pci/if_wmvar.h 1.46

- Add missing drain for pcq in wm_stop_locked().
- Add support for I219V 15-19 and I219LM 16-19.
- Fix Tx stall.
- Use wm_flush_desc_rings() workaround more on I219.
- Change DMA physical address in wm_flush_desc_rings() to match other
OSes.
- Check return value correctly in wm_lv_jumbo_workaround_ich8lan().
- Add new sysctl hw.wmN.debug_flags. This sysctl can be used if
WM_DEBUG is set.
- Add some sysctl values for debugging TX/RX queues.
- WM_EVENT_COUNTER is enabled by default on 64 bit architectures.
- Remove extra unlock/lock processing around if_percpuq_enqueue().
- Refactor rxq->rxq_ptr updating.
- Stop legacy interrupts before calling softint.
- Disable printf()s in wm_flush_desc_rings() because the code is
verified.
- Print I219's version number.
- Uniform INTx/MSI handler's Tx/Rx behavior to MSI-X's one.
- Fix return value of interrupt handler.
- Only print an error about missing I/O BARs for chips that need it.
- Do not return a void value from a void function.
- Add new flag named WM_F_CRC_STRIP and use it. No functional change.
- Whitespace fixes. Fix comments. No functional change.
1.645.2.11 Thu Oct 21 14:30:10 UTC 2021 martin Pull up the following, requested by msaitoh in ticket #1363:

share/man/man4/wm.4 1.42
sys/dev/pci/files.pci 1.434
sys/dev/pci/if_wm.c 1.690,1.692-1.693,1.697-1.704,
1.706-1.715 via patch

- Add missing drain for pcq in wm_stop_locked().
- Add support for I219V 15-19 and I219LM 16-19.
- Fix Tx stall.
- Use wm_flush_desc_rings() workaround more on I219.
- Change DMA physical address in wm_flush_desc_rings() to match other
OSes.
- Check return value correctly in wm_lv_jumbo_workaround_ich8lan().
- Add new sysctl hw.wmN.debug_flags. This sysctl can be used if
WM_DEBUG is set.
- Add some sysctl values for debugging TX/RX queues.
- Use atomic_{load,store}_relaxed for evcnt 64 bit counter.
- WM_EVENT_COUNTER is enabled by default on 64 bit architectures.
- Remove extra unlock/lock processing around if_percpuq_enqueue().
- Refactor rxq->rxq_ptr updating.
- Stop legacy interrupts before calling softint.
- Disable printf()s in wm_flush_desc_rings() because the code is
verified.
- Print I219's version number.
- Uniform INTx/MSI handler's Tx/Rx behavior to MSI-X's one.
- Fix return value of interrupt handler.
- Only print an error about missing I/O BARs for chips that need it.
- Do not return a void value from a void function.
- Fix comment.
- Whitespace fixes. No functional change.
pcidevs 1.693 Wed Feb 02 13:26:06 UTC 2005 christos PR/29196: Robert Elz: Add support for Broadcom BCM4401-B0 ethernet
1.1383.2.8 Tue Jul 07 10:29:05 UTC 2020 martin Pull up following revision(s) (requested by jmcneill in ticket #980):

sys/dev/pci/if_aq.c: revision 1.4
sys/dev/pci/if_aq.c: revision 1.5
sys/arch/amd64/conf/GENERIC: revision 1.553
sys/dev/pci/files.pci: revision 1.419
sys/arch/amd64/conf/XEN3_DOM0: revision 1.170
sys/dev/pci/if_aq.c: revision 1.9
share/man/man4/Makefile: revision 1.693
sys/dev/pci/pcidevs: revision 1.1411
share/man/man4/aq.4: revision 1.1
share/man/man4/aq.4: revision 1.3
sys/arch/i386/conf/ALL: revision 1.479
share/man/man4/aq.4: revision 1.4
sys/dev/pci/if_aq.c: revision 1.10
sys/dev/pci/files.pci: revision 1.421
sys/dev/pci/if_aq.c: revision 1.11
sys/dev/pci/if_aq.c: revision 1.12
sys/dev/pci/if_aq.c: revision 1.13
sys/dev/pci/if_aq.c: revision 1.14
sys/dev/pci/if_aq.c: revision 1.15
sys/dev/pci/if_aq.c: revision 1.16
sys/dev/pci/pcidevs: revision 1.1408
sys/arch/amd64/conf/ALL: revision 1.135
sys/net/ethertypes.h: revision 1.19
sys/arch/i386/conf/GENERIC: revision 1.1218
distrib/sets/lists/man/mi: revision 1.1668
sys/dev/pci/if_aq.c: revision 1.1
sys/dev/pci/if_aq.c: revision 1.2
sys/dev/pci/pcidevs: revision 1.1395
sys/dev/pci/if_aq.c: revision 1.3
sys/arch/evbarm/conf/GENERIC64: revision 1.125

Add the ETHERTYPE_QINQ for 802.1ad VLAN stacking

add Aquantia AQC 10G network adapters
add support Aquantia AQC seriese 10G network adapters.

this driver is based on the FreeBSD version https://github.com/Aquantia/aqtion-freebsd ,
but drastically rewritten for NetBSD.

add aq(4)

Add Aquantia AQC100, AQC100S and D100.

add support VLAN HW filter

set/clear IFF_OACTIVE flag only on txring 0

make counters per queue

support internal PHY temperature sensor

Found by kUBSan:
- Use unsigned to avoid undefined behavior in aq_hw_init().
- Cast to unsigned to avoid undefined behavior in aq_set_mac_addr().

fix descriptions of register map in comment

return the ifmedia active status correctly even while the link is not up after attach.
pointed out by msaitoh@. thanks.

On FIBRE devices, there are times when linkstat interrupt doesn't occur?
reported from Andrius V. thanks.
- use polling instead of linkstat interrupt when FIBRE
- add AQ_FORCE_POLL_LINKSTAT options (not by default)

sort product table, and tabify

add support AQC100S and D100.
not tested, but they are probably the same as the AQC100.
pcidevs.h 1.693 Wed Feb 02 11:20:40 UTC 2005 abs Regen to pick up corrected code for VIA VT6421
pcidevs_data.h 1.693 Sun Feb 20 18:07:30 UTC 2005 jdolecek regen: change the VIATECH VT61XX to VT612X
  /src/sys/arch/amd64/conf/
ALL 1.120.2.4 Tue Jul 07 10:29:05 UTC 2020 martin Pull up following revision(s) (requested by jmcneill in ticket #980):

sys/dev/pci/if_aq.c: revision 1.4
sys/dev/pci/if_aq.c: revision 1.5
sys/arch/amd64/conf/GENERIC: revision 1.553
sys/dev/pci/files.pci: revision 1.419
sys/arch/amd64/conf/XEN3_DOM0: revision 1.170
sys/dev/pci/if_aq.c: revision 1.9
share/man/man4/Makefile: revision 1.693
sys/dev/pci/pcidevs: revision 1.1411
share/man/man4/aq.4: revision 1.1
share/man/man4/aq.4: revision 1.3
sys/arch/i386/conf/ALL: revision 1.479
share/man/man4/aq.4: revision 1.4
sys/dev/pci/if_aq.c: revision 1.10
sys/dev/pci/files.pci: revision 1.421
sys/dev/pci/if_aq.c: revision 1.11
sys/dev/pci/if_aq.c: revision 1.12
sys/dev/pci/if_aq.c: revision 1.13
sys/dev/pci/if_aq.c: revision 1.14
sys/dev/pci/if_aq.c: revision 1.15
sys/dev/pci/if_aq.c: revision 1.16
sys/dev/pci/pcidevs: revision 1.1408
sys/arch/amd64/conf/ALL: revision 1.135
sys/net/ethertypes.h: revision 1.19
sys/arch/i386/conf/GENERIC: revision 1.1218
distrib/sets/lists/man/mi: revision 1.1668
sys/dev/pci/if_aq.c: revision 1.1
sys/dev/pci/if_aq.c: revision 1.2
sys/dev/pci/pcidevs: revision 1.1395
sys/dev/pci/if_aq.c: revision 1.3
sys/arch/evbarm/conf/GENERIC64: revision 1.125

Add the ETHERTYPE_QINQ for 802.1ad VLAN stacking

add Aquantia AQC 10G network adapters
add support Aquantia AQC seriese 10G network adapters.

this driver is based on the FreeBSD version https://github.com/Aquantia/aqtion-freebsd ,
but drastically rewritten for NetBSD.

add aq(4)

Add Aquantia AQC100, AQC100S and D100.

add support VLAN HW filter

set/clear IFF_OACTIVE flag only on txring 0

make counters per queue

support internal PHY temperature sensor

Found by kUBSan:
- Use unsigned to avoid undefined behavior in aq_hw_init().
- Cast to unsigned to avoid undefined behavior in aq_set_mac_addr().

fix descriptions of register map in comment

return the ifmedia active status correctly even while the link is not up after attach.
pointed out by msaitoh@. thanks.

On FIBRE devices, there are times when linkstat interrupt doesn't occur?
reported from Andrius V. thanks.
- use polling instead of linkstat interrupt when FIBRE
- add AQ_FORCE_POLL_LINKSTAT options (not by default)

sort product table, and tabify

add support AQC100S and D100.
not tested, but they are probably the same as the AQC100.
XEN3_DOM0 1.167.2.3 Tue Jul 07 10:29:05 UTC 2020 martin Pull up following revision(s) (requested by jmcneill in ticket #980):

sys/dev/pci/if_aq.c: revision 1.4
sys/dev/pci/if_aq.c: revision 1.5
sys/arch/amd64/conf/GENERIC: revision 1.553
sys/dev/pci/files.pci: revision 1.419
sys/arch/amd64/conf/XEN3_DOM0: revision 1.170
sys/dev/pci/if_aq.c: revision 1.9
share/man/man4/Makefile: revision 1.693
sys/dev/pci/pcidevs: revision 1.1411
share/man/man4/aq.4: revision 1.1
share/man/man4/aq.4: revision 1.3
sys/arch/i386/conf/ALL: revision 1.479
share/man/man4/aq.4: revision 1.4
sys/dev/pci/if_aq.c: revision 1.10
sys/dev/pci/files.pci: revision 1.421
sys/dev/pci/if_aq.c: revision 1.11
sys/dev/pci/if_aq.c: revision 1.12
sys/dev/pci/if_aq.c: revision 1.13
sys/dev/pci/if_aq.c: revision 1.14
sys/dev/pci/if_aq.c: revision 1.15
sys/dev/pci/if_aq.c: revision 1.16
sys/dev/pci/pcidevs: revision 1.1408
sys/arch/amd64/conf/ALL: revision 1.135
sys/net/ethertypes.h: revision 1.19
sys/arch/i386/conf/GENERIC: revision 1.1218
distrib/sets/lists/man/mi: revision 1.1668
sys/dev/pci/if_aq.c: revision 1.1
sys/dev/pci/if_aq.c: revision 1.2
sys/dev/pci/pcidevs: revision 1.1395
sys/dev/pci/if_aq.c: revision 1.3
sys/arch/evbarm/conf/GENERIC64: revision 1.125

Add the ETHERTYPE_QINQ for 802.1ad VLAN stacking

add Aquantia AQC 10G network adapters
add support Aquantia AQC seriese 10G network adapters.

this driver is based on the FreeBSD version https://github.com/Aquantia/aqtion-freebsd ,
but drastically rewritten for NetBSD.

add aq(4)

Add Aquantia AQC100, AQC100S and D100.

add support VLAN HW filter

set/clear IFF_OACTIVE flag only on txring 0

make counters per queue

support internal PHY temperature sensor

Found by kUBSan:
- Use unsigned to avoid undefined behavior in aq_hw_init().
- Cast to unsigned to avoid undefined behavior in aq_set_mac_addr().

fix descriptions of register map in comment

return the ifmedia active status correctly even while the link is not up after attach.
pointed out by msaitoh@. thanks.

On FIBRE devices, there are times when linkstat interrupt doesn't occur?
reported from Andrius V. thanks.
- use polling instead of linkstat interrupt when FIBRE
- add AQ_FORCE_POLL_LINKSTAT options (not by default)

sort product table, and tabify

add support AQC100S and D100.
not tested, but they are probably the same as the AQC100.
GENERIC 1.531.2.10 Tue Jul 07 10:29:05 UTC 2020 martin Pull up following revision(s) (requested by jmcneill in ticket #980):

sys/dev/pci/if_aq.c: revision 1.4
sys/dev/pci/if_aq.c: revision 1.5
sys/arch/amd64/conf/GENERIC: revision 1.553
sys/dev/pci/files.pci: revision 1.419
sys/arch/amd64/conf/XEN3_DOM0: revision 1.170
sys/dev/pci/if_aq.c: revision 1.9
share/man/man4/Makefile: revision 1.693
sys/dev/pci/pcidevs: revision 1.1411
share/man/man4/aq.4: revision 1.1
share/man/man4/aq.4: revision 1.3
sys/arch/i386/conf/ALL: revision 1.479
share/man/man4/aq.4: revision 1.4
sys/dev/pci/if_aq.c: revision 1.10
sys/dev/pci/files.pci: revision 1.421
sys/dev/pci/if_aq.c: revision 1.11
sys/dev/pci/if_aq.c: revision 1.12
sys/dev/pci/if_aq.c: revision 1.13
sys/dev/pci/if_aq.c: revision 1.14
sys/dev/pci/if_aq.c: revision 1.15
sys/dev/pci/if_aq.c: revision 1.16
sys/dev/pci/pcidevs: revision 1.1408
sys/arch/amd64/conf/ALL: revision 1.135
sys/net/ethertypes.h: revision 1.19
sys/arch/i386/conf/GENERIC: revision 1.1218
distrib/sets/lists/man/mi: revision 1.1668
sys/dev/pci/if_aq.c: revision 1.1
sys/dev/pci/if_aq.c: revision 1.2
sys/dev/pci/pcidevs: revision 1.1395
sys/dev/pci/if_aq.c: revision 1.3
sys/arch/evbarm/conf/GENERIC64: revision 1.125

Add the ETHERTYPE_QINQ for 802.1ad VLAN stacking

add Aquantia AQC 10G network adapters
add support Aquantia AQC seriese 10G network adapters.

this driver is based on the FreeBSD version https://github.com/Aquantia/aqtion-freebsd ,
but drastically rewritten for NetBSD.

add aq(4)

Add Aquantia AQC100, AQC100S and D100.

add support VLAN HW filter

set/clear IFF_OACTIVE flag only on txring 0

make counters per queue

support internal PHY temperature sensor

Found by kUBSan:
- Use unsigned to avoid undefined behavior in aq_hw_init().
- Cast to unsigned to avoid undefined behavior in aq_set_mac_addr().

fix descriptions of register map in comment

return the ifmedia active status correctly even while the link is not up after attach.
pointed out by msaitoh@. thanks.

On FIBRE devices, there are times when linkstat interrupt doesn't occur?
reported from Andrius V. thanks.
- use polling instead of linkstat interrupt when FIBRE
- add AQ_FORCE_POLL_LINKSTAT options (not by default)

sort product table, and tabify

add support AQC100S and D100.
not tested, but they are probably the same as the AQC100.
  /src/sys/arch/evbarm/conf/
GENERIC64 1.103.2.13 Tue Jul 07 10:29:06 UTC 2020 martin Pull up following revision(s) (requested by jmcneill in ticket #980):

sys/dev/pci/if_aq.c: revision 1.4
sys/dev/pci/if_aq.c: revision 1.5
sys/arch/amd64/conf/GENERIC: revision 1.553
sys/dev/pci/files.pci: revision 1.419
sys/arch/amd64/conf/XEN3_DOM0: revision 1.170
sys/dev/pci/if_aq.c: revision 1.9
share/man/man4/Makefile: revision 1.693
sys/dev/pci/pcidevs: revision 1.1411
share/man/man4/aq.4: revision 1.1
share/man/man4/aq.4: revision 1.3
sys/arch/i386/conf/ALL: revision 1.479
share/man/man4/aq.4: revision 1.4
sys/dev/pci/if_aq.c: revision 1.10
sys/dev/pci/files.pci: revision 1.421
sys/dev/pci/if_aq.c: revision 1.11
sys/dev/pci/if_aq.c: revision 1.12
sys/dev/pci/if_aq.c: revision 1.13
sys/dev/pci/if_aq.c: revision 1.14
sys/dev/pci/if_aq.c: revision 1.15
sys/dev/pci/if_aq.c: revision 1.16
sys/dev/pci/pcidevs: revision 1.1408
sys/arch/amd64/conf/ALL: revision 1.135
sys/net/ethertypes.h: revision 1.19
sys/arch/i386/conf/GENERIC: revision 1.1218
distrib/sets/lists/man/mi: revision 1.1668
sys/dev/pci/if_aq.c: revision 1.1
sys/dev/pci/if_aq.c: revision 1.2
sys/dev/pci/pcidevs: revision 1.1395
sys/dev/pci/if_aq.c: revision 1.3
sys/arch/evbarm/conf/GENERIC64: revision 1.125

Add the ETHERTYPE_QINQ for 802.1ad VLAN stacking

add Aquantia AQC 10G network adapters
add support Aquantia AQC seriese 10G network adapters.

this driver is based on the FreeBSD version https://github.com/Aquantia/aqtion-freebsd ,
but drastically rewritten for NetBSD.

add aq(4)

Add Aquantia AQC100, AQC100S and D100.

add support VLAN HW filter

set/clear IFF_OACTIVE flag only on txring 0

make counters per queue

support internal PHY temperature sensor

Found by kUBSan:
- Use unsigned to avoid undefined behavior in aq_hw_init().
- Cast to unsigned to avoid undefined behavior in aq_set_mac_addr().

fix descriptions of register map in comment

return the ifmedia active status correctly even while the link is not up after attach.
pointed out by msaitoh@. thanks.

On FIBRE devices, there are times when linkstat interrupt doesn't occur?
reported from Andrius V. thanks.
- use polling instead of linkstat interrupt when FIBRE
- add AQ_FORCE_POLL_LINKSTAT options (not by default)

sort product table, and tabify

add support AQC100S and D100.
not tested, but they are probably the same as the AQC100.
  /src/sys/dev/usb/
usbdevs.h 1.693 Mon Sep 14 15:51:29 UTC 2015 nonaka regen.
usbdevs_data.h 1.693 Wed Sep 09 20:05:57 UTC 2015 rjs Regen.
usbdevs 1.693 Tue Mar 17 08:14:30 UTC 2015 macallan add Ingenic Semiconductor Ltd.
  /src/usr.bin/xlint/lint1/
tree.c 1.693 Sun Sep 14 14:42:52 UTC 2025 rillig lint: warn about signed '<<' that ends up exactly in the msb
  /src/sys/arch/i386/conf/
ALL 1.469.2.3 Tue Jul 07 10:29:06 UTC 2020 martin Pull up following revision(s) (requested by jmcneill in ticket #980):

sys/dev/pci/if_aq.c: revision 1.4
sys/dev/pci/if_aq.c: revision 1.5
sys/arch/amd64/conf/GENERIC: revision 1.553
sys/dev/pci/files.pci: revision 1.419
sys/arch/amd64/conf/XEN3_DOM0: revision 1.170
sys/dev/pci/if_aq.c: revision 1.9
share/man/man4/Makefile: revision 1.693
sys/dev/pci/pcidevs: revision 1.1411
share/man/man4/aq.4: revision 1.1
share/man/man4/aq.4: revision 1.3
sys/arch/i386/conf/ALL: revision 1.479
share/man/man4/aq.4: revision 1.4
sys/dev/pci/if_aq.c: revision 1.10
sys/dev/pci/files.pci: revision 1.421
sys/dev/pci/if_aq.c: revision 1.11
sys/dev/pci/if_aq.c: revision 1.12
sys/dev/pci/if_aq.c: revision 1.13
sys/dev/pci/if_aq.c: revision 1.14
sys/dev/pci/if_aq.c: revision 1.15
sys/dev/pci/if_aq.c: revision 1.16
sys/dev/pci/pcidevs: revision 1.1408
sys/arch/amd64/conf/ALL: revision 1.135
sys/net/ethertypes.h: revision 1.19
sys/arch/i386/conf/GENERIC: revision 1.1218
distrib/sets/lists/man/mi: revision 1.1668
sys/dev/pci/if_aq.c: revision 1.1
sys/dev/pci/if_aq.c: revision 1.2
sys/dev/pci/pcidevs: revision 1.1395
sys/dev/pci/if_aq.c: revision 1.3
sys/arch/evbarm/conf/GENERIC64: revision 1.125

Add the ETHERTYPE_QINQ for 802.1ad VLAN stacking

add Aquantia AQC 10G network adapters
add support Aquantia AQC seriese 10G network adapters.

this driver is based on the FreeBSD version https://github.com/Aquantia/aqtion-freebsd ,
but drastically rewritten for NetBSD.

add aq(4)

Add Aquantia AQC100, AQC100S and D100.

add support VLAN HW filter

set/clear IFF_OACTIVE flag only on txring 0

make counters per queue

support internal PHY temperature sensor

Found by kUBSan:
- Use unsigned to avoid undefined behavior in aq_hw_init().
- Cast to unsigned to avoid undefined behavior in aq_set_mac_addr().

fix descriptions of register map in comment

return the ifmedia active status correctly even while the link is not up after attach.
pointed out by msaitoh@. thanks.

On FIBRE devices, there are times when linkstat interrupt doesn't occur?
reported from Andrius V. thanks.
- use polling instead of linkstat interrupt when FIBRE
- add AQ_FORCE_POLL_LINKSTAT options (not by default)

sort product table, and tabify

add support AQC100S and D100.
not tested, but they are probably the same as the AQC100.
GENERIC 1.693 Fri Aug 05 09:23:16 UTC 2005 skrll Add (commented out) ucycom to various kernel configs.
1.1208.2.5 Tue Jul 07 10:29:06 UTC 2020 martin Pull up following revision(s) (requested by jmcneill in ticket #980):

sys/dev/pci/if_aq.c: revision 1.4
sys/dev/pci/if_aq.c: revision 1.5
sys/arch/amd64/conf/GENERIC: revision 1.553
sys/dev/pci/files.pci: revision 1.419
sys/arch/amd64/conf/XEN3_DOM0: revision 1.170
sys/dev/pci/if_aq.c: revision 1.9
share/man/man4/Makefile: revision 1.693
sys/dev/pci/pcidevs: revision 1.1411
share/man/man4/aq.4: revision 1.1
share/man/man4/aq.4: revision 1.3
sys/arch/i386/conf/ALL: revision 1.479
share/man/man4/aq.4: revision 1.4
sys/dev/pci/if_aq.c: revision 1.10
sys/dev/pci/files.pci: revision 1.421
sys/dev/pci/if_aq.c: revision 1.11
sys/dev/pci/if_aq.c: revision 1.12
sys/dev/pci/if_aq.c: revision 1.13
sys/dev/pci/if_aq.c: revision 1.14
sys/dev/pci/if_aq.c: revision 1.15
sys/dev/pci/if_aq.c: revision 1.16
sys/dev/pci/pcidevs: revision 1.1408
sys/arch/amd64/conf/ALL: revision 1.135
sys/net/ethertypes.h: revision 1.19
sys/arch/i386/conf/GENERIC: revision 1.1218
distrib/sets/lists/man/mi: revision 1.1668
sys/dev/pci/if_aq.c: revision 1.1
sys/dev/pci/if_aq.c: revision 1.2
sys/dev/pci/pcidevs: revision 1.1395
sys/dev/pci/if_aq.c: revision 1.3
sys/arch/evbarm/conf/GENERIC64: revision 1.125

Add the ETHERTYPE_QINQ for 802.1ad VLAN stacking

add Aquantia AQC 10G network adapters
add support Aquantia AQC seriese 10G network adapters.

this driver is based on the FreeBSD version https://github.com/Aquantia/aqtion-freebsd ,
but drastically rewritten for NetBSD.

add aq(4)

Add Aquantia AQC100, AQC100S and D100.

add support VLAN HW filter

set/clear IFF_OACTIVE flag only on txring 0

make counters per queue

support internal PHY temperature sensor

Found by kUBSan:
- Use unsigned to avoid undefined behavior in aq_hw_init().
- Cast to unsigned to avoid undefined behavior in aq_set_mac_addr().

fix descriptions of register map in comment

return the ifmedia active status correctly even while the link is not up after attach.
pointed out by msaitoh@. thanks.

On FIBRE devices, there are times when linkstat interrupt doesn't occur?
reported from Andrius V. thanks.
- use polling instead of linkstat interrupt when FIBRE
- add AQ_FORCE_POLL_LINKSTAT options (not by default)

sort product table, and tabify

add support AQC100S and D100.
not tested, but they are probably the same as the AQC100.
  /src/usr.bin/make/
parse.c 1.693 Tue Feb 14 21:08:00 UTC 2023 rillig make: reduce complexity of evaluating expressions

No functional change.
var.c 1.693 Sat Nov 21 18:41:57 UTC 2020 rillig make(1): rename GNode.context to vars

Especially in the variables module, the expression 'ctxt->context' looked
redundant. Having a GNode as a context sounds ok, but a context of a
context just doesn't make sense.
  /src/sys/arch/i386/i386/
machdep.c 1.693 Mon Aug 16 19:39:06 UTC 2010 jym Add machdep.pae sysctl(7) for i386. Thanks to Paul and Joerg for their
reviews.

In kernel, it matches the 'i386_use_pae' variable (0: kernel does not use
PAE, 1: kernel uses PAE). Will be used by i386 kvm(3) to know the functions
that should get called for VA => PA translations.
  /src/sys/sys/
param.h 1.693 Wed Jun 02 01:48:08 UTC 2021 yamaguchi NetBSD 9.99.83 - struct ifnet adds 'if_lagg' field

Completed in 983 milliseconds

1 2