Home | History | Annotate | Line # | Download | only in sun2
      1 /*	$NetBSD: locore2.c,v 1.37 2026/11/14 02:43:48 thorpej Exp $	*/
      2 
      3 /*-
      4  * Copyright (c) 1996 The NetBSD Foundation, Inc.
      5  * All rights reserved.
      6  *
      7  * This code is derived from software contributed to The NetBSD Foundation
      8  * by Adam Glass, Gordon W. Ross, and Matthew Fredette.
      9  *
     10  * Redistribution and use in source and binary forms, with or without
     11  * modification, are permitted provided that the following conditions
     12  * are met:
     13  * 1. Redistributions of source code must retain the above copyright
     14  *    notice, this list of conditions and the following disclaimer.
     15  * 2. Redistributions in binary form must reproduce the above copyright
     16  *    notice, this list of conditions and the following disclaimer in the
     17  *    documentation and/or other materials provided with the distribution.
     18  *
     19  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     20  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     21  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     22  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     23  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     29  * POSSIBILITY OF SUCH DAMAGE.
     30  */
     31 
     32 #include <sys/cdefs.h>
     33 __KERNEL_RCSID(0, "$NetBSD: locore2.c,v 1.37 2026/11/14 02:43:48 thorpej Exp $");
     34 
     35 #include "opt_ddb.h"
     36 #include "opt_modular.h"
     37 
     38 #include <sys/param.h>
     39 #include <sys/systm.h>
     40 #include <sys/proc.h>
     41 #include <sys/reboot.h>
     42 #define ELFSIZE 32
     43 #include <sys/exec_elf.h>
     44 
     45 #include <uvm/uvm_extern.h>
     46 
     47 #include <dev/cons.h>
     48 
     49 #include <machine/cpu.h>
     50 #include <machine/db_machdep.h>
     51 #include <machine/dvma.h>
     52 #include <machine/fcode.h>
     53 #include <machine/idprom.h>
     54 #include <machine/leds.h>
     55 #include <machine/promlib.h>
     56 #include <machine/pmap.h>
     57 #include <machine/pte.h>
     58 #include <machine/vectors.h>
     59 
     60 #include <sun2/sun2/control.h>
     61 #include <sun2/sun2/machdep.h>
     62 
     63 #include "ksyms.h"
     64 
     65 /* This is defined in locore.s */
     66 extern char kernel_text[];
     67 
     68 /* These are defined by the linker */
     69 extern char etext[], edata[], end[];
     70 int nsym;
     71 char *ssym, *esym;
     72 
     73 /*
     74  * XXX: m68k common code needs these...
     75  * ... but this port does not need to deal with anything except
     76  * an mc68010, so these two variables are always ignored.
     77  */
     78 int cputype = CPU_68010;
     79 int mmutype = MMU_SUN;
     80 
     81 /*
     82  * Now our own stuff.
     83  */
     84 
     85 u_char cpu_machine_id = 0;
     86 const char *cpu_string = NULL;
     87 int cpu_has_multibus = 0;
     88 int cpu_has_vme = 0;
     89 
     90 /* XXX This is probably overkill. */
     91 int delay_divisor = delay_divisor_est(25);
     92 
     93 /* First C code called by locore.s */
     94 void *_bootstrap(void);
     95 
     96 #if NKSYMS || defined(DDB) || defined(MODULAR)
     97 /*
     98  * Preserve symbols and strings by setting esym.
     99  */
    100 static void __attribute__((no_instrument_function))
    101 _save_symtab(void)
    102 {
    103 	int i;
    104 	Elf_Ehdr *ehdr;
    105 	Elf_Shdr *shp;
    106 	vaddr_t minsym, maxsym;
    107 
    108 	/*
    109 	 * Check the ELF headers.
    110 	 */
    111 
    112 	ehdr = (void *)end;
    113 	if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG) != 0 ||
    114 	    ehdr->e_ident[EI_CLASS] != ELFCLASS32) {
    115 		prom_printf("_save_symtab: bad ELF magic\n");
    116 		return;
    117 	}
    118 
    119 	/*
    120 	 * Find the end of the symbols and strings.
    121 	 */
    122 
    123 	maxsym = 0;
    124 	minsym = ~maxsym;
    125 	shp = (Elf_Shdr *)(end + ehdr->e_shoff);
    126 	for (i = 0; i < ehdr->e_shnum; i++) {
    127 		if (shp[i].sh_type != SHT_SYMTAB &&
    128 		    shp[i].sh_type != SHT_STRTAB) {
    129 			continue;
    130 		}
    131 		minsym = uimin(minsym, (vaddr_t)end + shp[i].sh_offset);
    132 		maxsym = uimax(maxsym, (vaddr_t)end + shp[i].sh_offset +
    133 			     shp[i].sh_size);
    134 	}
    135 
    136 	nsym = 1;
    137 	ssym = (char *)ehdr;
    138 	esym = (char *)maxsym;
    139 }
    140 #endif	/* DDB */
    141 
    142 /*
    143  * This function is called from _bootstrap() to initialize
    144  * pre-vm-system virtual memory.  All this really does is to
    145  * set virtual_avail to the first page following preloaded
    146  * data (i.e. the kernel and its symbol table) and special
    147  * things that may be needed very early (lwp0 upages).
    148  * Once that is done, pmap_bootstrap() is called to do the
    149  * usual preparations for our use of the MMU.
    150  *
    151  * Returns the new kernel %sp value for lwp0.
    152  */
    153 static void * __attribute__((no_instrument_function))
    154 _vm_init(void)
    155 {
    156 	vaddr_t nextva;
    157 	paddr_t nextpa;
    158 
    159 	/*
    160 	 * First preserve our symbol table, which might have been
    161 	 * loaded after our BSS area by the boot loader.  However,
    162 	 * if DDB is not part of this kernel, ignore the symbols.
    163 	 */
    164 	esym = end + 4;
    165 #if NKSYMS || defined(DDB) || defined(MODULAR)
    166 	/* This will advance esym past the symbols. */
    167 	_save_symtab();
    168 #endif
    169 
    170 	/*
    171 	 * Steal some special-purpose, already mapped pages.
    172 	 * Note: msgbuf is setup in machdep.c:cpu_startup()
    173 	 */
    174 	nextva = m68k_round_page(esym);
    175 
    176 	/*
    177 	 * Setup the u-area pages (stack, etc.) for lwp0.
    178 	 * This is done very early (here) to make sure the
    179 	 * fault handler works in case we hit an early bug.
    180 	 * (The fault handler may reference lwp0 stuff.)
    181 	 */
    182 	uvm_lwp_setuarea(&lwp0, nextva);
    183 	memset((void *)nextva, 0, USPACE);
    184 
    185 	/* Create a fake exception frame so that cpu_lwp_fork() can copy it. */
    186 	struct trapframe *tf = (struct trapframe *)(nextva + USPACE) - 1;
    187 	tf->tf_sr = PSL_USER;
    188 	lwp0.l_md.md_regs = (int *)tf;
    189 
    190 	nextva += USPACE;
    191 
    192 	/* This does most of the real work. */
    193 	nextpa = pmap_bootstrap(nextva);
    194 
    195 	machine_init_common(nextpa);
    196 
    197 	return tf;
    198 }
    199 
    200 /*
    201  * Determine which Sun2 model we are running on.
    202  *
    203  * XXX: Just save idprom.idp_machtype here, and
    204  * XXX: move the rest of this to identifycpu().
    205  * XXX: Move cache_size stuff to cache.c.
    206  */
    207 static void __attribute__((no_instrument_function))
    208 _verify_hardware(void)
    209 {
    210 	unsigned char machtype;
    211 	int cpu_match = 0;
    212 
    213 	machtype = identity_prom.idp_machtype;
    214 	if ((machtype & IDM_ARCH_MASK) != IDM_ARCH_SUN2) {
    215 		prom_printf("Bad IDPROM arch!\n");
    216 		prom_abort();
    217 	}
    218 
    219 	cpu_machine_id = machtype;
    220 	switch (cpu_machine_id) {
    221 
    222 	case ID_SUN2_120 :
    223 		cpu_match++;
    224 		cpu_string = "{120,170}";
    225 		cpuspeed_khz = 10000;
    226 		delay_divisor = delay_divisor_est(10);
    227 		cpu_has_multibus = true;
    228 		break;
    229 
    230 	case ID_SUN2_50 :
    231 		cpu_match++;
    232 		cpu_string = "50";
    233 		cpuspeed_khz = 10000;
    234 		delay_divisor = delay_divisor_est(10);
    235 		cpu_has_vme = true;
    236 		break;
    237 
    238 	default:
    239 		prom_printf("unknown sun2 model\n");
    240 		prom_abort();
    241 	}
    242 	if (!cpu_match) {
    243 		prom_printf("kernel not configured for the Sun 2 model\n");
    244 		prom_abort();
    245 	}
    246 }
    247 
    248 /*
    249  * This is called from locore.s just after the kernel is remapped
    250  * to its proper address, but before the call to main().  The work
    251  * done here corresponds to various things done in locore.s on the
    252  * hp300 port (and other m68k) but which we prefer to do in C code.
    253  * Also do setup specific to the Sun PROM monitor and IDPROM here.
    254  */
    255 void * __attribute__((no_instrument_function))
    256 _bootstrap(void)
    257 {
    258 	extern struct consdev consdev_prom;	/* XXX */
    259 	vaddr_t va;
    260 
    261 	/* First, Clear BSS. */
    262 	memset(edata, 0, end - edata);
    263 
    264 	/* Initialize the PROM. */
    265 	prom_init();
    266 
    267 	/*
    268 	 * Initialize console to point to the PROM (output only) table
    269 	 * for early printf calls.
    270 	 */
    271 	cn_tab = &consdev_prom;
    272 
    273 	/* Copy the IDPROM from control space. */
    274 	idprom_init();
    275 
    276 	/* Validate the Sun2 model (from IDPROM). */
    277 	_verify_hardware();
    278 
    279 	/* Handle kernel mapping, pmap_bootstrap(), etc. */
    280 	void *ksp = _vm_init();
    281 
    282 	/*
    283 	 * Point interrupts/exceptions to our vector table.
    284 	 * (Until now, we use the one setup by the PROM.)
    285 	 */
    286 	vec_init();
    287 	/* Interrupts are enabled later, after autoconfig. */
    288 
    289 	/*
    290  	 * Now unmap the PROM's physical/virtual pages zero through three.
    291  	 */
    292 	for(va = 0; va < PAGE_SIZE * 4; va += PAGE_SIZE)
    293 		set_pte(va, PG_INVAL);
    294 
    295 	/*
    296 	 * Turn on the LEDs so we know power is on.
    297 	 * Needs idprom_init and obio_init earlier.
    298 	 */
    299 	leds_init();
    300 
    301 	/*
    302 	 * Initialize the source/destination control registers for
    303 	 * movs.
    304 	 */
    305 	setsfc(FC_USERD);
    306 	setdfc(FC_USERD);
    307 
    308 	return ksp;
    309 }
    310