1 /* $NetBSD: mcp980x.c,v 1.9 2026/10/13 08:16:44 rkujawa Exp $ */ 2 3 /*- 4 * Copyright (c) 2013 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Radoslaw Kujawa. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * Microchip MCP9800/1/2/3 2-Wire High-Accuracy Temperature Sensor driver. 34 * 35 * TODO: better error checking, particularly in user settable limits. 36 * 37 * Note: MCP9805 is different and is supported by the sdtemp(4) driver. 38 */ 39 40 #include <sys/cdefs.h> 41 __KERNEL_RCSID(0, "$NetBSD: mcp980x.c,v 1.9 2026/10/13 08:16:44 rkujawa Exp $"); 42 43 #include <sys/param.h> 44 #include <sys/systm.h> 45 #include <sys/device.h> 46 #include <sys/kernel.h> 47 #include <sys/mutex.h> 48 #include <sys/endian.h> 49 #include <sys/sysctl.h> 50 51 #include <sys/bus.h> 52 #include <dev/i2c/i2cvar.h> 53 54 #include <dev/sysmon/sysmonvar.h> 55 56 #include <dev/i2c/mcp980xreg.h> 57 58 struct mcp980x_softc { 59 device_t sc_dev; 60 61 i2c_tag_t sc_tag; 62 i2c_addr_t sc_addr; 63 64 int sc_res; 65 int sc_hyst; 66 int sc_limit; 67 68 /* envsys(4) stuff */ 69 struct sysmon_envsys *sc_sme; 70 envsys_data_t sc_sensor; 71 kmutex_t sc_lock; 72 }; 73 74 75 static int mcp980x_match(device_t, cfdata_t, void *); 76 static void mcp980x_attach(device_t, device_t, void *); 77 78 static uint8_t mcp980x_reg_read_1(struct mcp980x_softc *, uint8_t); 79 static uint16_t mcp980x_reg_read_2(struct mcp980x_softc *, uint8_t); 80 static void mcp980x_reg_write_1(struct mcp980x_softc *, uint8_t, uint8_t); 81 82 static uint8_t mcp980x_resolution_get(struct mcp980x_softc *); 83 static void mcp980x_resolution_set(struct mcp980x_softc *, uint8_t); 84 85 static int8_t mcp980x_hysteresis_get(struct mcp980x_softc *); 86 static void mcp980x_hysteresis_set(struct mcp980x_softc *, int8_t); 87 static int8_t mcp980x_templimit_get(struct mcp980x_softc *); 88 static void mcp980x_templimit_set(struct mcp980x_softc *, int8_t); 89 90 static int8_t mcp980x_s8b_get(struct mcp980x_softc *, uint8_t); 91 static void mcp980x_s8b_set(struct mcp980x_softc *, uint8_t, int8_t); 92 93 static uint32_t mcp980x_temperature(struct mcp980x_softc *); 94 95 static void mcp980x_envsys_register(struct mcp980x_softc *); 96 static void mcp980x_envsys_refresh(struct sysmon_envsys *, envsys_data_t *); 97 98 static void mcp980x_setup_sysctl(struct mcp980x_softc *); 99 static int sysctl_mcp980x_res(SYSCTLFN_ARGS); 100 static int sysctl_mcp980x_hysteresis(SYSCTLFN_ARGS); 101 static int sysctl_mcp980x_templimit(SYSCTLFN_ARGS); 102 103 CFATTACH_DECL_NEW(mcp980x, sizeof (struct mcp980x_softc), 104 mcp980x_match, mcp980x_attach, NULL, NULL); 105 106 static int 107 mcp980x_match(device_t parent, cfdata_t cf, void *aux) 108 { 109 struct i2c_attach_args *ia = aux; 110 111 if (ia->ia_addr >= MCP980X_ADDR_CONST && 112 ia->ia_addr <= (MCP980X_ADDR_CONST + MCP980X_ADDR_VAR)) 113 return I2C_MATCH_ADDRESS_ONLY; 114 115 return 0; 116 } 117 118 static void 119 mcp980x_attach(device_t parent, device_t self, void *aux) 120 { 121 struct mcp980x_softc *sc = device_private(self); 122 struct i2c_attach_args *ia = aux; 123 124 sc->sc_dev = self; 125 sc->sc_addr = ia->ia_addr; 126 sc->sc_tag = ia->ia_tag; 127 128 aprint_normal(": Microchip MCP980x Temperature Sensor\n"); 129 130 sc->sc_res = MCP980X_CONFIG_ADC_RES_12BIT; 131 mcp980x_resolution_set(sc, sc->sc_res); 132 133 sc->sc_hyst = mcp980x_hysteresis_get(sc); 134 sc->sc_limit = mcp980x_templimit_get(sc); 135 136 mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_NONE); 137 138 mcp980x_setup_sysctl(sc); 139 mcp980x_envsys_register(sc); 140 } 141 142 static uint16_t 143 mcp980x_reg_read_2(struct mcp980x_softc *sc, uint8_t reg) 144 { 145 uint16_t rv; 146 147 if (iic_acquire_bus(sc->sc_tag, 0) != 0) { 148 aprint_error_dev(sc->sc_dev, "cannot acquire bus for read\n"); 149 return 0; 150 } 151 152 if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_addr, ®, 153 1, &rv, 2, 0)) { 154 iic_release_bus(sc->sc_tag, 0); 155 aprint_error_dev(sc->sc_dev, "cannot execute operation\n"); 156 return 0; 157 } 158 iic_release_bus(sc->sc_tag, 0); 159 160 return be16toh(rv); 161 } 162 163 static uint8_t 164 mcp980x_reg_read_1(struct mcp980x_softc *sc, uint8_t reg) 165 { 166 uint8_t rv; 167 168 if (iic_acquire_bus(sc->sc_tag, 0) != 0) { 169 aprint_error_dev(sc->sc_dev, "cannot acquire bus for read\n"); 170 return 0; 171 } 172 173 if (iic_exec(sc->sc_tag, I2C_OP_READ_WITH_STOP, sc->sc_addr, ®, 174 1, &rv, 1, 0)) { 175 iic_release_bus(sc->sc_tag, 0); 176 aprint_error_dev(sc->sc_dev, "cannot execute operation\n"); 177 return 0; 178 } 179 iic_release_bus(sc->sc_tag, 0); 180 181 return rv; 182 } 183 184 static void 185 mcp980x_reg_write_2(struct mcp980x_softc *sc, uint8_t reg, uint16_t val) 186 { 187 uint16_t beval; 188 189 beval = htobe16(val); 190 191 if (iic_acquire_bus(sc->sc_tag, 0) != 0) { 192 aprint_error_dev(sc->sc_dev, "cannot acquire bus for write\n"); 193 return; 194 } 195 196 if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_addr, ®, 197 1, &beval, 2, 0)) { 198 aprint_error_dev(sc->sc_dev, "cannot execute operation\n"); 199 } 200 201 iic_release_bus(sc->sc_tag, 0); 202 203 } 204 205 static void 206 mcp980x_reg_write_1(struct mcp980x_softc *sc, uint8_t reg, uint8_t val) 207 { 208 if (iic_acquire_bus(sc->sc_tag, 0) != 0) { 209 aprint_error_dev(sc->sc_dev, "cannot acquire bus for write\n"); 210 return; 211 } 212 213 if (iic_exec(sc->sc_tag, I2C_OP_WRITE_WITH_STOP, sc->sc_addr, ®, 214 1, &val, 1, 0)) { 215 aprint_error_dev(sc->sc_dev, "cannot execute operation\n"); 216 } 217 218 iic_release_bus(sc->sc_tag, 0); 219 220 } 221 222 static int8_t 223 mcp980x_templimit_get(struct mcp980x_softc *sc) 224 { 225 return mcp980x_s8b_get(sc, MCP980X_TEMP_LIMIT); 226 } 227 228 static void 229 mcp980x_templimit_set(struct mcp980x_softc *sc, int8_t val) 230 { 231 mcp980x_s8b_set(sc, MCP980X_TEMP_LIMIT, val); 232 } 233 234 static int8_t 235 mcp980x_hysteresis_get(struct mcp980x_softc *sc) 236 { 237 return mcp980x_s8b_get(sc, MCP980X_TEMP_HYSTERESIS); 238 } 239 240 static void 241 mcp980x_hysteresis_set(struct mcp980x_softc *sc, int8_t val) 242 { 243 mcp980x_s8b_set(sc, MCP980X_TEMP_HYSTERESIS, val); 244 } 245 246 static int8_t 247 mcp980x_s8b_get(struct mcp980x_softc *sc, uint8_t reg) 248 { 249 return mcp980x_reg_read_2(sc, reg) >> MCP980X_TEMP_HYSTLIMIT_INT_SHIFT; 250 } 251 252 static void 253 mcp980x_s8b_set(struct mcp980x_softc *sc, uint8_t reg, int8_t val) 254 { 255 mcp980x_reg_write_2(sc, reg, val << MCP980X_TEMP_HYSTLIMIT_INT_SHIFT); 256 } 257 258 static uint8_t 259 mcp980x_resolution_get(struct mcp980x_softc *sc) 260 { 261 uint8_t cfg, res; 262 263 cfg = mcp980x_reg_read_1(sc, MCP980X_CONFIG); 264 res = (cfg & MCP980X_CONFIG_ADC_RES) >> 265 MCP980X_CONFIG_ADC_RES_SHIFT; 266 267 return res; 268 } 269 270 static void 271 mcp980x_resolution_set(struct mcp980x_softc *sc, uint8_t res) 272 { 273 uint8_t cfg; 274 275 /* read config register but discard resolution bits */ 276 cfg = mcp980x_reg_read_1(sc, MCP980X_CONFIG) & ~MCP980X_CONFIG_ADC_RES; 277 /* set resolution bits to new value */ 278 cfg |= res << MCP980X_CONFIG_ADC_RES_SHIFT; 279 280 mcp980x_reg_write_1(sc, MCP980X_CONFIG, cfg); 281 } 282 283 /* Get temperature in microKelvins. */ 284 static uint32_t 285 mcp980x_temperature(struct mcp980x_softc *sc) 286 { 287 uint16_t raw; 288 uint32_t rv, uk, basedegc; 289 290 raw = mcp980x_reg_read_2(sc, MCP980X_AMBIENT_TEMP); 291 292 basedegc = (raw & MCP980X_AMBIENT_TEMP_DEGREES) >> 293 MCP980X_AMBIENT_TEMP_DEGREES_SHIFT; 294 295 uk = 1000000 * basedegc; 296 297 if (raw & MCP980X_AMBIENT_TEMP_05DEGREE) 298 uk += 500000; 299 if (raw & MCP980X_AMBIENT_TEMP_025DEGREE) 300 uk += 250000; 301 if (raw & MCP980X_AMBIENT_TEMP_0125DEGREE) 302 uk += 125000; 303 if (raw & MCP980X_AMBIENT_TEMP_00625DEGREE) 304 uk += 62500; 305 306 if (raw & MCP980X_AMBIENT_TEMP_SIGN) 307 rv = 273150000U - uk; 308 else 309 rv = 273150000U + uk; 310 311 return rv; 312 } 313 314 static void 315 mcp980x_envsys_register(struct mcp980x_softc *sc) 316 { 317 sc->sc_sme = sysmon_envsys_create(); 318 319 strlcpy(sc->sc_sensor.desc, "Ambient temp", 320 sizeof(sc->sc_sensor.desc)); 321 sc->sc_sensor.units = ENVSYS_STEMP; 322 sc->sc_sensor.state = ENVSYS_SINVALID; 323 324 if (sysmon_envsys_sensor_attach(sc->sc_sme, &sc->sc_sensor)) { 325 aprint_error_dev(sc->sc_dev, 326 "error attaching sensor\n"); 327 return; 328 } 329 330 sc->sc_sme->sme_name = device_xname(sc->sc_dev); 331 sc->sc_sme->sme_cookie = sc; 332 sc->sc_sme->sme_refresh = mcp980x_envsys_refresh; 333 334 if (sysmon_envsys_register(sc->sc_sme)) { 335 aprint_error_dev(sc->sc_dev, "unable to register in sysmon\n"); 336 sysmon_envsys_destroy(sc->sc_sme); 337 } 338 } 339 340 static void 341 mcp980x_envsys_refresh(struct sysmon_envsys *sme, envsys_data_t *edata) 342 { 343 struct mcp980x_softc *sc = sme->sme_cookie; 344 345 mutex_enter(&sc->sc_lock); 346 347 edata->value_cur = mcp980x_temperature(sc); 348 edata->state = ENVSYS_SVALID; 349 350 mutex_exit(&sc->sc_lock); 351 } 352 353 static void 354 mcp980x_setup_sysctl(struct mcp980x_softc *sc) 355 { 356 const struct sysctlnode *me = NULL, *node = NULL; 357 358 sysctl_createv(NULL, 0, NULL, &me, 359 CTLFLAG_READWRITE, 360 CTLTYPE_NODE, device_xname(sc->sc_dev), NULL, 361 NULL, 0, NULL, 0, 362 CTL_MACHDEP, CTL_CREATE, CTL_EOL); 363 364 sysctl_createv(NULL, 0, NULL, &node, 365 CTLFLAG_READWRITE | CTLFLAG_OWNDESC, 366 CTLTYPE_INT, "res", "Resolution", 367 sysctl_mcp980x_res, 1, (void *)sc, 0, 368 CTL_MACHDEP, me->sysctl_num, CTL_CREATE, CTL_EOL); 369 370 sysctl_createv(NULL, 0, NULL, &node, 371 CTLFLAG_READWRITE | CTLFLAG_OWNDESC, 372 CTLTYPE_INT, "hysteresis", "Temperature hysteresis", 373 sysctl_mcp980x_hysteresis, 1, (void *)sc, 0, 374 CTL_MACHDEP, me->sysctl_num, CTL_CREATE, CTL_EOL); 375 376 sysctl_createv(NULL, 0, NULL, &node, 377 CTLFLAG_READWRITE | CTLFLAG_OWNDESC, 378 CTLTYPE_INT, "templimit", "Temperature limit", 379 sysctl_mcp980x_templimit, 1, (void *)sc, 0, 380 CTL_MACHDEP, me->sysctl_num, CTL_CREATE, CTL_EOL); 381 } 382 383 384 SYSCTL_SETUP(sysctl_mcp980x_setup, "sysctl mcp980x subtree setup") 385 { 386 sysctl_createv(NULL, 0, NULL, NULL, CTLFLAG_PERMANENT, 387 CTLTYPE_NODE, "machdep", NULL, NULL, 0, NULL, 0, 388 CTL_MACHDEP, CTL_EOL); 389 } 390 391 392 static int 393 sysctl_mcp980x_res(SYSCTLFN_ARGS) 394 { 395 struct sysctlnode node = *rnode; 396 struct mcp980x_softc *sc = node.sysctl_data; 397 int newres, err; 398 399 node.sysctl_data = &sc->sc_res; 400 if ((err = (sysctl_lookup(SYSCTLFN_CALL(&node)))) != 0) 401 return err; 402 403 if (newp) { 404 newres = *(int *)node.sysctl_data; 405 if (newres > MCP980X_CONFIG_ADC_RES_12BIT) 406 return EINVAL; 407 sc->sc_res = (uint8_t) newres; 408 mcp980x_resolution_set(sc, sc->sc_res); 409 return 0; 410 } else { 411 sc->sc_res = mcp980x_resolution_get(sc); 412 node.sysctl_size = 4; 413 } 414 415 return err; 416 } 417 418 static int 419 sysctl_mcp980x_hysteresis(SYSCTLFN_ARGS) 420 { 421 struct sysctlnode node = *rnode; 422 struct mcp980x_softc *sc = node.sysctl_data; 423 int newhyst, err; 424 425 node.sysctl_data = &sc->sc_hyst; 426 if ((err = (sysctl_lookup(SYSCTLFN_CALL(&node)))) != 0) 427 return err; 428 429 if (newp) { 430 newhyst = *(int *)node.sysctl_data; 431 sc->sc_hyst = newhyst; 432 mcp980x_hysteresis_set(sc, sc->sc_hyst); 433 return 0; 434 } else { 435 sc->sc_hyst = mcp980x_hysteresis_get(sc); 436 node.sysctl_size = 4; 437 } 438 439 return err; 440 } 441 442 static int 443 sysctl_mcp980x_templimit(SYSCTLFN_ARGS) 444 { 445 struct sysctlnode node = *rnode; 446 struct mcp980x_softc *sc = node.sysctl_data; 447 int newlimit, err; 448 449 node.sysctl_data = &sc->sc_limit; 450 if ((err = (sysctl_lookup(SYSCTLFN_CALL(&node)))) != 0) 451 return err; 452 453 if (newp) { 454 newlimit = *(int *)node.sysctl_data; 455 sc->sc_limit = newlimit; 456 mcp980x_templimit_set(sc, sc->sc_limit); 457 return 0; 458 } else { 459 sc->sc_limit = mcp980x_templimit_get(sc); 460 node.sysctl_size = 4; 461 } 462 463 return err; 464 } 465 466