1 /* $NetBSD: plcom.c,v 1.71 2026/11/10 03:04:59 thorpej Exp $ */ 2 3 /*- 4 * Copyright (c) 2001 ARM Ltd 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. The name of the company may not be used to endorse or promote 16 * products derived from this software without specific prior written 17 * permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 20 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 21 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 22 * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 23 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 24 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 25 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 * 31 * Copyright (c) 1998, 1999, 2012 The NetBSD Foundation, Inc. 32 * All rights reserved. 33 * 34 * This code is derived from software contributed to The NetBSD Foundation 35 * by Charles M. Hannum and Nick Hudson. 36 * 37 * Redistribution and use in source and binary forms, with or without 38 * modification, are permitted provided that the following conditions 39 * are met: 40 * 1. Redistributions of source code must retain the above copyright 41 * notice, this list of conditions and the following disclaimer. 42 * 2. Redistributions in binary form must reproduce the above copyright 43 * notice, this list of conditions and the following disclaimer in the 44 * documentation and/or other materials provided with the distribution. 45 * 46 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 47 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 48 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 49 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 50 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 51 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 52 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 53 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 54 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 55 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 56 * POSSIBILITY OF SUCH DAMAGE. 57 */ 58 59 /* 60 * Copyright (c) 1991 The Regents of the University of California. 61 * All rights reserved. 62 * 63 * Redistribution and use in source and binary forms, with or without 64 * modification, are permitted provided that the following conditions 65 * are met: 66 * 1. Redistributions of source code must retain the above copyright 67 * notice, this list of conditions and the following disclaimer. 68 * 2. Redistributions in binary form must reproduce the above copyright 69 * notice, this list of conditions and the following disclaimer in the 70 * documentation and/or other materials provided with the distribution. 71 * 3. Neither the name of the University nor the names of its contributors 72 * may be used to endorse or promote products derived from this software 73 * without specific prior written permission. 74 * 75 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 76 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 77 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 78 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 79 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 80 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 81 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 82 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 83 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 84 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 85 * SUCH DAMAGE. 86 * 87 * @(#)com.c 7.5 (Berkeley) 5/16/91 88 */ 89 90 /* 91 * COM driver for the Prime Cell PL010 and PL011 UARTs. Both are is similar to 92 * the 16C550, but have a completely different programmer's model. 93 * Derived from the NS16550AF com driver. 94 * 95 * Lock order: 96 * ttylock (IPL_VM) 97 * -> sc->sc_lock (IPL_HIGH) 98 * -> timecounter_lock (IPL_HIGH) 99 */ 100 101 #include <sys/cdefs.h> 102 __KERNEL_RCSID(0, "$NetBSD: plcom.c,v 1.71 2026/11/10 03:04:59 thorpej Exp $"); 103 104 #include "opt_plcom.h" 105 #include "opt_kgdb.h" 106 #include "opt_lockdebug.h" 107 #include "opt_multiprocessor.h" 108 109 #include <sys/param.h> 110 #include <sys/systm.h> 111 #include <sys/ioctl.h> 112 #include <sys/select.h> 113 #include <sys/tty.h> 114 #include <sys/proc.h> 115 #include <sys/conf.h> 116 #include <sys/file.h> 117 #include <sys/uio.h> 118 #include <sys/kernel.h> 119 #include <sys/syslog.h> 120 #include <sys/types.h> 121 #include <sys/device.h> 122 #include <sys/kmem.h> 123 #include <sys/timepps.h> 124 #include <sys/vnode.h> 125 #include <sys/kauth.h> 126 #include <sys/intr.h> 127 #include <sys/bus.h> 128 #ifdef RND_COM 129 #include <sys/rndsource.h> 130 #endif 131 132 #include <evbarm/dev/plcomreg.h> 133 #include <evbarm/dev/plcomvar.h> 134 135 #include <dev/cons.h> 136 137 static void plcom_enable_debugport (struct plcom_softc *); 138 139 void plcom_config (struct plcom_softc *); 140 void plcom_shutdown (struct plcom_softc *); 141 int pl010comspeed (long, long); 142 int pl011comspeed (long, long); 143 static uint32_t cflag2lcr (tcflag_t); 144 int plcomparam (struct tty *, struct termios *); 145 void plcomstart (struct tty *); 146 int plcomhwiflow (struct tty *, int); 147 148 void plcom_loadchannelregs (struct plcom_softc *); 149 void plcom_hwiflow (struct plcom_softc *); 150 void plcom_break (struct plcom_softc *, int); 151 void plcom_modem (struct plcom_softc *, int); 152 void tiocm_to_plcom (struct plcom_softc *, u_long, int); 153 int plcom_to_tiocm (struct plcom_softc *); 154 void plcom_iflush (struct plcom_softc *); 155 156 int plcom_common_getc (dev_t, struct plcom_instance *); 157 void plcom_common_putc (dev_t, struct plcom_instance *, int); 158 159 int plcominit (struct plcom_instance *, int, int, tcflag_t); 160 161 dev_type_open(plcomopen); 162 dev_type_close(plcomclose); 163 dev_type_read(plcomread); 164 dev_type_write(plcomwrite); 165 dev_type_ioctl(plcomioctl); 166 dev_type_stop(plcomstop); 167 dev_type_tty(plcomtty); 168 dev_type_poll(plcompoll); 169 170 int plcomcngetc (dev_t); 171 void plcomcnputc (dev_t, int); 172 void plcomcnpollc (dev_t, int); 173 void plcomcnhalt (dev_t); 174 175 void plcomsoft (void *); 176 static inline void plcom_rxsoft (struct plcom_softc *, struct tty *); 177 static inline void plcom_txsoft (struct plcom_softc *, struct tty *); 178 static inline void plcom_stsoft (struct plcom_softc *, struct tty *); 179 static inline void plcom_schedrx (struct plcom_softc *); 180 void plcomdiag (void *); 181 182 bool plcom_intstatus(struct plcom_instance *, u_int *); 183 184 extern struct cfdriver plcom_cd; 185 186 const struct cdevsw plcom_cdevsw = { 187 .d_open = plcomopen, 188 .d_close = plcomclose, 189 .d_read = plcomread, 190 .d_write = plcomwrite, 191 .d_ioctl = plcomioctl, 192 .d_stop = plcomstop, 193 .d_tty = plcomtty, 194 .d_poll = plcompoll, 195 .d_mmap = nommap, 196 .d_kqfilter = ttykqfilter, 197 .d_discard = nodiscard, 198 .d_flag = D_TTY 199 }; 200 201 /* 202 * Make this an option variable one can patch. 203 * But be warned: this must be a power of 2! 204 */ 205 u_int plcom_rbuf_size = PLCOM_RING_SIZE; 206 207 /* Stop input when 3/4 of the ring is full; restart when only 1/4 is full. */ 208 u_int plcom_rbuf_hiwat = (PLCOM_RING_SIZE * 1) / 4; 209 u_int plcom_rbuf_lowat = (PLCOM_RING_SIZE * 3) / 4; 210 211 static int plcomconsunit = -1; 212 static struct plcom_instance plcomcons_info; 213 214 static int plcomconsattached; 215 static int plcomconsrate; 216 static tcflag_t plcomconscflag; 217 static struct cnm_state plcom_cnm_state; 218 219 static int ppscap = 220 PPS_TSFMT_TSPEC | 221 PPS_CAPTUREASSERT | 222 PPS_CAPTURECLEAR | 223 #ifdef PPS_SYNC 224 PPS_HARDPPSONASSERT | PPS_HARDPPSONCLEAR | 225 #endif /* PPS_SYNC */ 226 PPS_OFFSETASSERT | PPS_OFFSETCLEAR; 227 228 #ifdef KGDB 229 #include <sys/kgdb.h> 230 231 static struct plcom_instance plcomkgdb_info; 232 static int plcom_kgdb_attached; 233 234 int plcom_kgdb_getc (void *); 235 void plcom_kgdb_putc (void *, int); 236 #endif /* KGDB */ 237 238 #define PLCOMDIALOUT_MASK TTDIALOUT_MASK 239 240 #define PLCOMUNIT(x) TTUNIT(x) 241 #define PLCOMDIALOUT(x) TTDIALOUT(x) 242 243 #define PLCOM_ISALIVE(sc) ((sc)->enabled != 0 && \ 244 device_is_active((sc)->sc_dev)) 245 246 #define BR BUS_SPACE_BARRIER_READ 247 #define BW BUS_SPACE_BARRIER_WRITE 248 #define PLCOM_BARRIER(pi, f) \ 249 bus_space_barrier((pi)->pi_iot, (pi)->pi_ioh, 0, (pi)->pi_size, (f)) 250 251 static uint8_t 252 pread1(struct plcom_instance *pi, bus_size_t reg) 253 { 254 if (!ISSET(pi->pi_flags, PLC_FLAG_32BIT_ACCESS)) 255 return bus_space_read_1(pi->pi_iot, pi->pi_ioh, reg); 256 257 return bus_space_read_4(pi->pi_iot, pi->pi_ioh, reg & -4) >> 258 (8 * (reg & 3)); 259 } 260 261 static uint16_t 262 pread2(struct plcom_instance *pi, bus_size_t reg) 263 { 264 if (!ISSET(pi->pi_flags, PLC_FLAG_32BIT_ACCESS)) 265 return bus_space_read_2(pi->pi_iot, pi->pi_ioh, reg); 266 267 return bus_space_read_4(pi->pi_iot, pi->pi_ioh, reg & -4) >> 268 (8 * (reg & 3)); 269 } 270 271 static void 272 pwrite1(struct plcom_instance *pi, bus_size_t o, uint8_t val) 273 { 274 if (!ISSET(pi->pi_flags, PLC_FLAG_32BIT_ACCESS)) { 275 bus_space_write_1(pi->pi_iot, pi->pi_ioh, o, val); 276 } else { 277 const size_t shift = 8 * (o & 3); 278 o &= -4; 279 uint32_t tmp = bus_space_read_4(pi->pi_iot, pi->pi_ioh, o); 280 tmp = (val << shift) | (tmp & ~(0xff << shift)); 281 bus_space_write_4(pi->pi_iot, pi->pi_ioh, o, tmp); 282 } 283 } 284 285 static void 286 pwrite2(struct plcom_instance *pi, bus_size_t o, uint16_t val) 287 { 288 if (!ISSET(pi->pi_flags, PLC_FLAG_32BIT_ACCESS)) { 289 bus_space_write_2(pi->pi_iot, pi->pi_ioh, o, val); 290 } else { 291 const size_t shift = 8 * (o & 3); 292 o &= -4; 293 uint32_t tmp = bus_space_read_4(pi->pi_iot, pi->pi_ioh, o); 294 tmp = (val << shift) | (tmp & ~(0xffff << shift)); 295 bus_space_write_4(pi->pi_iot, pi->pi_ioh, o, tmp); 296 } 297 } 298 299 static void 300 pwritem1(struct plcom_instance *pi, bus_size_t o, const uint8_t *datap, 301 bus_size_t count) 302 { 303 if (!ISSET(pi->pi_flags, PLC_FLAG_32BIT_ACCESS)) { 304 bus_space_write_multi_1(pi->pi_iot, pi->pi_ioh, o, datap, count); 305 } else { 306 KASSERT((o & 3) == 0); 307 while (count--) { 308 bus_space_write_4(pi->pi_iot, pi->pi_ioh, o, *datap++); 309 }; 310 } 311 } 312 313 #define PREAD1(pi, reg) pread1(pi, reg) 314 #define PREAD2(pi, reg) pread2(pi, reg) 315 #define PREAD4(pi, reg) \ 316 bus_space_read_4((pi)->pi_iot, (pi)->pi_ioh, (reg)) 317 318 #define PWRITE1(pi, reg, val) pwrite1(pi, reg, val) 319 #define PWRITEM1(pi, reg, d, c) pwritem1(pi, reg, d, c) 320 #define PWRITE2(pi, reg, val) pwrite2(pi, reg, val) 321 #define PWRITE4(pi, reg, val) \ 322 bus_space_write_4((pi)->pi_iot, (pi)->pi_ioh, (reg), (val)) 323 324 int 325 pl010comspeed(long speed, long frequency) 326 { 327 #define divrnd(n, q) (((n)*2/(q)+1)/2) /* divide and round off */ 328 329 int x, err; 330 331 #if 0 332 if (speed == 0) 333 return 0; 334 #endif 335 if (speed <= 0) 336 return -1; 337 x = divrnd(frequency / 16, speed); 338 if (x <= 0) 339 return -1; 340 err = divrnd(((quad_t)frequency) * 1000 / 16, speed * x) - 1000; 341 if (err < 0) 342 err = -err; 343 if (err > PLCOM_TOLERANCE) 344 return -1; 345 return x; 346 347 #undef divrnd 348 } 349 350 int 351 pl011comspeed(long speed, long frequency) 352 { 353 int denom = 16 * speed; 354 int div = frequency / denom; 355 int rem = frequency % denom; 356 357 int ibrd = div << 6; 358 int fbrd = (((8 * rem) / speed) + 1) / 2; 359 360 /* Tolerance? */ 361 return ibrd | fbrd; 362 } 363 364 #ifdef PLCOM_DEBUG 365 int plcom_debug = 0; 366 367 void plcomstatus (struct plcom_softc *, const char *); 368 void 369 plcomstatus(struct plcom_softc *sc, const char *str) 370 { 371 struct tty *tp = sc->sc_tty; 372 373 printf("%s: %s %sclocal %sdcd %sts_carr_on %sdtr %stx_stopped\n", 374 device_xname(sc->sc_dev), str, 375 ISSET(tp->t_cflag, CLOCAL) ? "+" : "-", 376 ISSET(sc->sc_msr, PL01X_MSR_DCD) ? "+" : "-", 377 ISSET(tp->t_state, TS_CARR_ON) ? "+" : "-", 378 ISSET(sc->sc_mcr, PL01X_MCR_DTR) ? "+" : "-", 379 sc->sc_tx_stopped ? "+" : "-"); 380 381 printf("%s: %s %scrtscts %scts %sts_ttstop %srts %xrx_flags\n", 382 device_xname(sc->sc_dev), str, 383 ISSET(tp->t_cflag, CRTSCTS) ? "+" : "-", 384 ISSET(sc->sc_msr, PL01X_MSR_CTS) ? "+" : "-", 385 ISSET(tp->t_state, TS_TTSTOP) ? "+" : "-", 386 ISSET(sc->sc_mcr, PL01X_MCR_RTS) ? "+" : "-", 387 sc->sc_rx_flags); 388 } 389 #endif 390 391 #if 0 392 int 393 plcomprobe1(bus_space_tag_t iot, bus_space_handle_t ioh) 394 { 395 int data; 396 397 /* Disable the UART. */ 398 bus_space_write_1(iot, ioh, plcom_cr, 0); 399 /* Make sure the FIFO is off. */ 400 bus_space_write_4(iot, ioh, plcom_lcr, PL01X_LCR_8BITS); 401 /* Disable interrupts. */ 402 bus_space_write_1(iot, ioh, plcom_iir, 0); 403 404 /* Make sure we swallow anything in the receiving register. */ 405 data = bus_space_read_1(iot, ioh, plcom_dr); 406 407 if (bus_space_read_4(iot, ioh, plcom_lcr) != PL01X_LCR_8BITS) 408 return 0; 409 410 data = bus_space_read_1(iot, ioh, plcom_fr) & (PL01X_FR_RXFF | PL01X_FR_RXFE); 411 412 if (data != PL01X_FR_RXFE) 413 return 0; 414 415 return 1; 416 } 417 #endif 418 419 /* 420 * No locking in this routine; it is only called during attach, 421 * or with the port already locked. 422 */ 423 static void 424 plcom_enable_debugport(struct plcom_softc *sc) 425 { 426 struct plcom_instance *pi = &sc->sc_pi; 427 428 sc->sc_cr = PL01X_CR_UARTEN; 429 SET(sc->sc_mcr, PL01X_MCR_DTR | PL01X_MCR_RTS); 430 431 /* Turn on line break interrupt, set carrier. */ 432 switch (pi->pi_type) { 433 case PLCOM_TYPE_PL010: 434 SET(sc->sc_cr, PL010_CR_RIE | PL010_CR_RTIE); 435 PWRITE1(pi, PL010COM_CR, sc->sc_cr); 436 if (sc->sc_set_mcr) { 437 /* XXX device_unit() abuse */ 438 sc->sc_set_mcr(sc->sc_set_mcr_arg, 439 device_unit(sc->sc_dev), sc->sc_mcr); 440 } 441 break; 442 case PLCOM_TYPE_PL011: 443 case PLCOM_TYPE_GENERIC_UART: 444 sc->sc_imsc = PL011_INT_RX | PL011_INT_RT; 445 SET(sc->sc_cr, PL011_CR_RXE | PL011_CR_TXE); 446 SET(sc->sc_cr, PL011_MCR(sc->sc_mcr)); 447 PWRITE2(pi, PL011COM_CR, sc->sc_cr); 448 PWRITE4(pi, PL011COM_IMSC, sc->sc_imsc); 449 break; 450 } 451 452 } 453 454 void 455 plcom_attach_subr(struct plcom_softc *sc) 456 { 457 struct plcom_instance *pi = &sc->sc_pi; 458 struct tty *tp; 459 460 callout_init(&sc->sc_diag_callout, 0); 461 mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_HIGH); 462 463 switch (pi->pi_type) { 464 case PLCOM_TYPE_PL010: 465 case PLCOM_TYPE_PL011: 466 case PLCOM_TYPE_GENERIC_UART: 467 break; 468 default: 469 aprint_error_dev(sc->sc_dev, 470 "Unknown plcom type: %d\n", pi->pi_type); 471 return; 472 } 473 474 /* Disable interrupts before configuring the device. */ 475 sc->sc_cr = 0; 476 sc->sc_imsc = 0; 477 478 if (bus_space_is_equal(pi->pi_iot, plcomcons_info.pi_iot) && 479 pi->pi_iobase == plcomcons_info.pi_iobase) { 480 plcomconsattached = 1; 481 482 /* Make sure the console is always "hardwired". */ 483 delay(1000); /* wait for output to finish */ 484 SET(sc->sc_hwflags, PLCOM_HW_CONSOLE); 485 SET(sc->sc_swflags, TIOCFLAG_SOFTCAR); 486 /* 487 * Must re-enable the console immediately, or we will 488 * hang when trying to print. 489 */ 490 sc->sc_cr = PL01X_CR_UARTEN; 491 switch (pi->pi_type) { 492 case PLCOM_TYPE_PL011: 493 case PLCOM_TYPE_GENERIC_UART: 494 SET(sc->sc_cr, PL011_CR_RXE | PL011_CR_TXE); 495 break; 496 } 497 } 498 499 switch (pi->pi_type) { 500 case PLCOM_TYPE_PL011: 501 if (pi->pi_periphid == 0) { 502 pi->pi_periphid = PREAD1(pi, PL011COM_PID0) << 0 503 | PREAD1(pi, PL011COM_PID1) << 8 504 | PREAD1(pi, PL011COM_PID2) << 16 505 | PREAD1(pi, PL011COM_PID3) << 24; 506 } 507 aprint_debug_dev(sc->sc_dev, "PID %08x\n", pi->pi_periphid); 508 break; 509 } 510 511 switch (pi->pi_type) { 512 case PLCOM_TYPE_PL010: 513 PWRITE1(pi, PL010COM_CR, sc->sc_cr); 514 break; 515 516 case PLCOM_TYPE_PL011: 517 case PLCOM_TYPE_GENERIC_UART: 518 PWRITE2(pi, PL011COM_CR, sc->sc_cr); 519 PWRITE4(pi, PL011COM_IMSC, sc->sc_imsc); 520 break; 521 } 522 523 if (sc->sc_fifolen == 0) { 524 switch (pi->pi_type) { 525 case PLCOM_TYPE_PL010: 526 /* 527 * The PL010 has a 16-byte fifo, but the tx interrupt 528 * triggers when there is space for 8 more bytes. 529 */ 530 sc->sc_fifolen = 8; 531 break; 532 case PLCOM_TYPE_PL011: 533 /* Some revisions have a 32 byte TX FIFO */ 534 switch (pi->pi_periphid & (PL011_DESIGNER_MASK | PL011_HWREV_MASK)) { 535 case PL011_DESIGNER_ARM | __SHIFTIN(0, PL011_HWREV_MASK): 536 case PL011_DESIGNER_ARM | __SHIFTIN(1, PL011_HWREV_MASK): 537 case PL011_DESIGNER_ARM | __SHIFTIN(2, PL011_HWREV_MASK): 538 sc->sc_fifolen = 16; 539 break; 540 default: 541 sc->sc_fifolen = 32; 542 break; 543 } 544 break; 545 case PLCOM_TYPE_GENERIC_UART: 546 /* At least 32 byte TX FIFO */ 547 sc->sc_fifolen = 32; 548 break; 549 } 550 } 551 552 /* Safe amount of bytes to fill when TX FIFO signals empty */ 553 sc->sc_burstlen = 1; 554 555 if (ISSET(sc->sc_hwflags, PLCOM_HW_TXFIFO_DISABLE)) { 556 sc->sc_fifolen = 1; 557 aprint_normal_dev(sc->sc_dev, "txfifo disabled\n"); 558 } 559 560 if (sc->sc_fifolen > 1) { 561 SET(sc->sc_hwflags, PLCOM_HW_FIFO); 562 aprint_normal_dev(sc->sc_dev, "txfifo %u bytes\n", sc->sc_fifolen); 563 } 564 565 tp = tty_alloc(); 566 tp->t_oproc = plcomstart; 567 tp->t_param = plcomparam; 568 tp->t_hwiflow = plcomhwiflow; 569 570 sc->sc_tty = tp; 571 sc->sc_rbuf = kmem_alloc(plcom_rbuf_size << 1, KM_SLEEP); 572 sc->sc_rbput = sc->sc_rbget = sc->sc_rbuf; 573 sc->sc_rbavail = plcom_rbuf_size; 574 sc->sc_ebuf = sc->sc_rbuf + (plcom_rbuf_size << 1); 575 576 tty_attach(tp); 577 578 if (ISSET(sc->sc_hwflags, PLCOM_HW_CONSOLE)) { 579 int maj; 580 581 /* locate the major number */ 582 maj = cdevsw_lookup_major(&plcom_cdevsw); 583 584 tp->t_dev = cn_tab->cn_dev = makedev(maj, device_unit(sc->sc_dev)); 585 586 aprint_normal_dev(sc->sc_dev, "console\n"); 587 } 588 589 #ifdef KGDB 590 /* 591 * Allow kgdb to "take over" this port. If this is 592 * the kgdb device, it has exclusive use. 593 */ 594 if (bus_space_is_equal(pi->pi_iot, plcomkgdb_info.pi_iot) && 595 pi->pi_iobase == plcomkgdb_info.pi_iobase) { 596 if (!ISSET(sc->sc_hwflags, PLCOM_HW_CONSOLE)) { 597 plcom_kgdb_attached = 1; 598 599 SET(sc->sc_hwflags, PLCOM_HW_KGDB); 600 } 601 aprint_normal_dev(sc->sc_dev, "kgdb\n"); 602 } 603 #endif 604 605 sc->sc_si = softint_establish(SOFTINT_SERIAL, plcomsoft, sc); 606 607 #ifdef RND_COM 608 rnd_attach_source(&sc->rnd_source, device_xname(sc->sc_dev), 609 RND_TYPE_TTY, RND_FLAG_DEFAULT); 610 #endif 611 612 /* 613 * if there are no enable/disable functions, assume the device 614 * is always enabled 615 */ 616 if (!sc->enable) 617 sc->enabled = 1; 618 619 plcom_config(sc); 620 621 SET(sc->sc_hwflags, PLCOM_HW_DEV_OK); 622 } 623 624 void 625 plcom_config(struct plcom_softc *sc) 626 { 627 struct plcom_instance *pi = &sc->sc_pi; 628 629 /* Disable interrupts before configuring the device. */ 630 sc->sc_cr = 0; 631 sc->sc_imsc = 0; 632 switch (pi->pi_type) { 633 case PLCOM_TYPE_PL010: 634 PWRITE1(pi, PL010COM_CR, sc->sc_cr); 635 break; 636 637 case PLCOM_TYPE_PL011: 638 case PLCOM_TYPE_GENERIC_UART: 639 PWRITE2(pi, PL011COM_CR, sc->sc_cr); 640 PWRITE4(pi, PL011COM_IMSC, sc->sc_imsc); 641 break; 642 } 643 644 if (ISSET(sc->sc_hwflags, PLCOM_HW_CONSOLE|PLCOM_HW_KGDB)) 645 plcom_enable_debugport(sc); 646 } 647 648 int 649 plcom_detach(device_t self, int flags) 650 { 651 struct plcom_softc *sc = device_private(self); 652 int maj, mn; 653 654 if (sc->sc_hwflags & (PLCOM_HW_CONSOLE|PLCOM_HW_KGDB)) 655 return EBUSY; 656 657 if (sc->disable != NULL && sc->enabled != 0) { 658 (*sc->disable)(sc); 659 sc->enabled = 0; 660 } 661 662 /* locate the major number */ 663 maj = cdevsw_lookup_major(&plcom_cdevsw); 664 665 /* Nuke the vnodes for any open instances. */ 666 mn = device_unit(self); 667 vdevgone(maj, mn, mn, VCHR); 668 669 mn |= PLCOMDIALOUT_MASK; 670 vdevgone(maj, mn, mn, VCHR); 671 672 if (sc->sc_rbuf == NULL) { 673 /* 674 * Ring buffer allocation failed in the plcom_attach_subr, 675 * only the tty is allocated, and nothing else. 676 */ 677 tty_free(sc->sc_tty); 678 return 0; 679 } 680 681 /* Free the receive buffer. */ 682 kmem_free(sc->sc_rbuf, sc->sc_ebuf - sc->sc_rbuf); 683 684 /* Detach and free the tty. */ 685 tty_detach(sc->sc_tty); 686 tty_free(sc->sc_tty); 687 688 /* Unhook the soft interrupt handler. */ 689 softint_disestablish(sc->sc_si); 690 691 #ifdef RND_COM 692 /* Unhook the entropy source. */ 693 rnd_detach_source(&sc->rnd_source); 694 #endif 695 callout_destroy(&sc->sc_diag_callout); 696 697 /* Destroy the lock. */ 698 mutex_destroy(&sc->sc_lock); 699 700 return 0; 701 } 702 703 int 704 plcom_activate(device_t self, enum devact act) 705 { 706 struct plcom_softc *sc = device_private(self); 707 708 switch (act) { 709 case DVACT_DEACTIVATE: 710 sc->enabled = 0; 711 return 0; 712 default: 713 return EOPNOTSUPP; 714 } 715 } 716 717 void 718 plcom_shutdown(struct plcom_softc *sc) 719 { 720 struct plcom_instance *pi = &sc->sc_pi; 721 struct tty *tp = sc->sc_tty; 722 mutex_spin_enter(&sc->sc_lock); 723 724 /* If we were asserting flow control, then deassert it. */ 725 SET(sc->sc_rx_flags, RX_IBUF_BLOCKED); 726 plcom_hwiflow(sc); 727 728 /* Clear any break condition set with TIOCSBRK. */ 729 plcom_break(sc, 0); 730 731 /* Turn off PPS capture on last close. */ 732 mutex_spin_enter(&timecounter_lock); 733 sc->sc_ppsmask = 0; 734 sc->ppsparam.mode = 0; 735 mutex_spin_exit(&timecounter_lock); 736 737 /* 738 * Hang up if necessary. Record when we hung up, so if we 739 * immediately open the port again, we will wait a bit until 740 * the other side has had time to notice that we hung up. 741 */ 742 if (ISSET(tp->t_cflag, HUPCL)) { 743 plcom_modem(sc, 0); 744 microuptime(&sc->sc_hup_pending); 745 sc->sc_hup_pending.tv_sec++; 746 } 747 748 sc->sc_cr = 0; 749 sc->sc_imsc = 0; 750 /* Turn off interrupts. */ 751 if (ISSET(sc->sc_hwflags, PLCOM_HW_CONSOLE)) { 752 /* interrupt on break */ 753 754 sc->sc_cr = PL01X_CR_UARTEN; 755 sc->sc_imsc = 0; 756 switch (pi->pi_type) { 757 case PLCOM_TYPE_PL010: 758 SET(sc->sc_cr, PL010_CR_RIE | PL010_CR_RTIE); 759 break; 760 case PLCOM_TYPE_PL011: 761 case PLCOM_TYPE_GENERIC_UART: 762 SET(sc->sc_cr, PL011_CR_RXE); 763 SET(sc->sc_imsc, PL011_INT_RT | PL011_INT_RX); 764 break; 765 } 766 } 767 switch (pi->pi_type) { 768 case PLCOM_TYPE_PL010: 769 SET(sc->sc_cr, PL010_CR_RIE | PL010_CR_RTIE); 770 PWRITE1(pi, PL010COM_CR, sc->sc_cr); 771 break; 772 case PLCOM_TYPE_PL011: 773 case PLCOM_TYPE_GENERIC_UART: 774 SET(sc->sc_cr, PL011_CR_RXE | PL011_CR_TXE); 775 SET(sc->sc_imsc, PL011_INT_RT | PL011_INT_RX); 776 PWRITE2(pi, PL011COM_CR, sc->sc_cr); 777 PWRITE4(pi, PL011COM_IMSC, sc->sc_imsc); 778 break; 779 } 780 781 mutex_spin_exit(&sc->sc_lock); 782 if (sc->disable) { 783 #ifdef DIAGNOSTIC 784 if (!sc->enabled) 785 panic("plcom_shutdown: not enabled?"); 786 #endif 787 (*sc->disable)(sc); 788 sc->enabled = 0; 789 } 790 } 791 792 int 793 plcomopen(dev_t dev, int flag, int mode, struct lwp *l) 794 { 795 struct plcom_softc *sc; 796 struct plcom_instance *pi; 797 struct tty *tp; 798 int s; 799 int error; 800 801 sc = device_lookup_private(&plcom_cd, PLCOMUNIT(dev)); 802 if (sc == NULL || !ISSET(sc->sc_hwflags, PLCOM_HW_DEV_OK) || 803 sc->sc_rbuf == NULL) 804 return ENXIO; 805 806 if (!device_is_active(sc->sc_dev)) 807 return ENXIO; 808 809 pi = &sc->sc_pi; 810 811 #ifdef KGDB 812 /* 813 * If this is the kgdb port, no other use is permitted. 814 */ 815 if (ISSET(sc->sc_hwflags, PLCOM_HW_KGDB)) 816 return EBUSY; 817 #endif 818 819 tp = sc->sc_tty; 820 821 if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp)) 822 return (EBUSY); 823 824 s = spltty(); 825 826 /* 827 * Do the following iff this is a first open. 828 */ 829 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 830 struct termios t; 831 struct timeval now, diff; 832 833 tp->t_dev = dev; 834 835 if (sc->enable) { 836 if ((*sc->enable)(sc)) { 837 splx(s); 838 aprint_error_dev(sc->sc_dev, 839 "device enable failed\n"); 840 return EIO; 841 } 842 mutex_spin_enter(&sc->sc_lock); 843 sc->enabled = 1; 844 plcom_config(sc); 845 } else { 846 mutex_spin_enter(&sc->sc_lock); 847 } 848 849 if (timerisset(&sc->sc_hup_pending)) { 850 microuptime(&now); 851 while (timercmp(&now, &sc->sc_hup_pending, <)) { 852 timersub(&sc->sc_hup_pending, &now, &diff); 853 const int ms = diff.tv_sec * 100 + 854 diff.tv_usec / 1000; 855 kpause(ttclos, false, uimax(mstohz(ms), 1), 856 &sc->sc_lock); 857 microuptime(&now); 858 } 859 timerclear(&sc->sc_hup_pending); 860 } 861 862 /* Turn on interrupts. */ 863 /* IER_ERXRDY | IER_ERLS | IER_EMSC; */ 864 /* Fetch the current modem control status, needed later. */ 865 sc->sc_cr = PL01X_CR_UARTEN; 866 switch (pi->pi_type) { 867 case PLCOM_TYPE_PL010: 868 SET(sc->sc_cr, 869 PL010_CR_RIE | PL010_CR_RTIE | PL010_CR_MSIE); 870 PWRITE1(pi, PL010COM_CR, sc->sc_cr); 871 sc->sc_msr = PREAD1(pi, PL01XCOM_FR); 872 break; 873 case PLCOM_TYPE_PL011: 874 case PLCOM_TYPE_GENERIC_UART: 875 SET(sc->sc_cr, PL011_CR_RXE | PL011_CR_TXE); 876 SET(sc->sc_imsc, PL011_INT_RT | PL011_INT_RX | 877 PL011_INT_MSMASK); 878 PWRITE4(pi, PL011COM_IMSC, sc->sc_imsc); 879 sc->sc_msr = PREAD4(pi, PL01XCOM_FR); 880 break; 881 } 882 883 /* Clear PPS capture state on first open. */ 884 885 mutex_spin_enter(&timecounter_lock); 886 sc->sc_ppsmask = 0; 887 sc->ppsparam.mode = 0; 888 mutex_spin_exit(&timecounter_lock); 889 890 mutex_spin_exit(&sc->sc_lock); 891 892 /* 893 * Initialize the termios status to the defaults. Add in the 894 * sticky bits from TIOCSFLAGS. 895 */ 896 if (ISSET(sc->sc_hwflags, PLCOM_HW_CONSOLE)) { 897 t.c_ospeed = plcomconsrate; 898 t.c_cflag = plcomconscflag; 899 } else { 900 t.c_ospeed = TTYDEF_SPEED; 901 t.c_cflag = TTYDEF_CFLAG; 902 } 903 t.c_ispeed = t.c_ospeed; 904 905 if (ISSET(sc->sc_swflags, TIOCFLAG_CLOCAL)) 906 SET(t.c_cflag, CLOCAL); 907 if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS)) 908 SET(t.c_cflag, CRTSCTS); 909 if (ISSET(sc->sc_swflags, TIOCFLAG_MDMBUF)) 910 SET(t.c_cflag, MDMBUF); 911 /* Make sure plcomparam() will do something. */ 912 tp->t_ospeed = 0; 913 (void) plcomparam(tp, &t); 914 tp->t_iflag = TTYDEF_IFLAG; 915 tp->t_oflag = TTYDEF_OFLAG; 916 tp->t_lflag = TTYDEF_LFLAG; 917 ttychars(tp); 918 ttsetwater(tp); 919 920 mutex_spin_enter(&sc->sc_lock); 921 922 /* 923 * Turn on DTR. We must always do this, even if carrier is not 924 * present, because otherwise we'd have to use TIOCSDTR 925 * immediately after setting CLOCAL, which applications do not 926 * expect. We always assert DTR while the device is open 927 * unless explicitly requested to deassert it. 928 */ 929 plcom_modem(sc, 1); 930 931 /* Clear the input ring, and unblock. */ 932 sc->sc_rbput = sc->sc_rbget = sc->sc_rbuf; 933 sc->sc_rbavail = plcom_rbuf_size; 934 plcom_iflush(sc); 935 CLR(sc->sc_rx_flags, RX_ANY_BLOCK); 936 plcom_hwiflow(sc); 937 938 #ifdef PLCOM_DEBUG 939 if (plcom_debug) 940 plcomstatus(sc, "plcomopen "); 941 #endif 942 943 mutex_spin_exit(&sc->sc_lock); 944 } 945 946 splx(s); 947 948 error = ttyopen(tp, PLCOMDIALOUT(dev), ISSET(flag, O_NONBLOCK)); 949 if (error) 950 goto bad; 951 952 error = (*tp->t_linesw->l_open)(dev, tp); 953 if (error) 954 goto bad; 955 956 return 0; 957 958 bad: 959 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 960 /* 961 * We failed to open the device, and nobody else had it opened. 962 * Clean up the state as appropriate. 963 */ 964 plcom_shutdown(sc); 965 } 966 967 return error; 968 } 969 970 int 971 plcomclose(dev_t dev, int flag, int mode, struct lwp *l) 972 { 973 struct plcom_softc *sc = 974 device_lookup_private(&plcom_cd, PLCOMUNIT(dev)); 975 struct tty *tp = sc->sc_tty; 976 977 /* XXX This is for cons.c. */ 978 if (!ISSET(tp->t_state, TS_ISOPEN)) 979 return 0; 980 981 (*tp->t_linesw->l_close)(tp, flag); 982 ttyclose(tp); 983 984 if (PLCOM_ISALIVE(sc) == 0) 985 return 0; 986 987 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 988 /* 989 * Although we got a last close, the device may still be in 990 * use; e.g. if this was the dialout node, and there are still 991 * processes waiting for carrier on the non-dialout node. 992 */ 993 plcom_shutdown(sc); 994 } 995 996 return 0; 997 } 998 999 int 1000 plcomread(dev_t dev, struct uio *uio, int flag) 1001 { 1002 struct plcom_softc *sc = 1003 device_lookup_private(&plcom_cd, PLCOMUNIT(dev)); 1004 struct tty *tp = sc->sc_tty; 1005 1006 if (PLCOM_ISALIVE(sc) == 0) 1007 return EIO; 1008 1009 return (*tp->t_linesw->l_read)(tp, uio, flag); 1010 } 1011 1012 int 1013 plcomwrite(dev_t dev, struct uio *uio, int flag) 1014 { 1015 struct plcom_softc *sc = 1016 device_lookup_private(&plcom_cd, PLCOMUNIT(dev)); 1017 struct tty *tp = sc->sc_tty; 1018 1019 if (PLCOM_ISALIVE(sc) == 0) 1020 return EIO; 1021 1022 return (*tp->t_linesw->l_write)(tp, uio, flag); 1023 } 1024 1025 int 1026 plcompoll(dev_t dev, int events, struct lwp *l) 1027 { 1028 struct plcom_softc *sc = 1029 device_lookup_private(&plcom_cd, PLCOMUNIT(dev)); 1030 struct tty *tp = sc->sc_tty; 1031 1032 if (PLCOM_ISALIVE(sc) == 0) 1033 return EIO; 1034 1035 return (*tp->t_linesw->l_poll)(tp, events, l); 1036 } 1037 1038 struct tty * 1039 plcomtty(dev_t dev) 1040 { 1041 struct plcom_softc *sc = 1042 device_lookup_private(&plcom_cd, PLCOMUNIT(dev)); 1043 struct tty *tp = sc->sc_tty; 1044 1045 return tp; 1046 } 1047 1048 int 1049 plcomioctl(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l) 1050 { 1051 struct plcom_softc *sc = 1052 device_lookup_private(&plcom_cd, PLCOMUNIT(dev)); 1053 struct tty *tp; 1054 int error; 1055 1056 if (sc == NULL) 1057 return ENXIO; 1058 if (PLCOM_ISALIVE(sc) == 0) 1059 return EIO; 1060 1061 tp = sc->sc_tty; 1062 1063 error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, l); 1064 if (error != EPASSTHROUGH) 1065 return error; 1066 1067 error = ttioctl(tp, cmd, data, flag, l); 1068 if (error != EPASSTHROUGH) 1069 return error; 1070 1071 error = 0; 1072 switch (cmd) { 1073 case TIOCSFLAGS: 1074 error = kauth_authorize_device_tty(l->l_cred, 1075 KAUTH_DEVICE_TTY_PRIVSET, tp); 1076 break; 1077 default: 1078 /* nothing */ 1079 break; 1080 } 1081 if (error) { 1082 return error; 1083 } 1084 1085 mutex_spin_enter(&sc->sc_lock); 1086 switch (cmd) { 1087 case TIOCSBRK: 1088 plcom_break(sc, 1); 1089 break; 1090 1091 case TIOCCBRK: 1092 plcom_break(sc, 0); 1093 break; 1094 1095 case TIOCSDTR: 1096 plcom_modem(sc, 1); 1097 break; 1098 1099 case TIOCCDTR: 1100 plcom_modem(sc, 0); 1101 break; 1102 1103 case TIOCGFLAGS: 1104 *(int *)data = sc->sc_swflags; 1105 break; 1106 1107 case TIOCSFLAGS: 1108 sc->sc_swflags = *(int *)data; 1109 break; 1110 1111 case TIOCMSET: 1112 case TIOCMBIS: 1113 case TIOCMBIC: 1114 tiocm_to_plcom(sc, cmd, *(int *)data); 1115 break; 1116 1117 case TIOCMGET: 1118 *(int *)data = plcom_to_tiocm(sc); 1119 break; 1120 1121 case PPS_IOC_CREATE: 1122 break; 1123 1124 case PPS_IOC_DESTROY: 1125 break; 1126 1127 case PPS_IOC_GETPARAMS: { 1128 pps_params_t *pp; 1129 pp = (pps_params_t *)data; 1130 mutex_spin_enter(&timecounter_lock); 1131 *pp = sc->ppsparam; 1132 mutex_spin_exit(&timecounter_lock); 1133 break; 1134 } 1135 1136 case PPS_IOC_SETPARAMS: { 1137 pps_params_t *pp; 1138 int mode; 1139 pp = (pps_params_t *)data; 1140 mutex_spin_enter(&timecounter_lock); 1141 if (pp->mode & ~ppscap) { 1142 error = EINVAL; 1143 mutex_spin_exit(&timecounter_lock); 1144 break; 1145 } 1146 sc->ppsparam = *pp; 1147 /* 1148 * Compute msr masks from user-specified timestamp state. 1149 */ 1150 mode = sc->ppsparam.mode; 1151 #ifdef PPS_SYNC 1152 if (mode & PPS_HARDPPSONASSERT) { 1153 mode |= PPS_CAPTUREASSERT; 1154 /* XXX revoke any previous HARDPPS source */ 1155 } 1156 if (mode & PPS_HARDPPSONCLEAR) { 1157 mode |= PPS_CAPTURECLEAR; 1158 /* XXX revoke any previous HARDPPS source */ 1159 } 1160 #endif /* PPS_SYNC */ 1161 switch (mode & PPS_CAPTUREBOTH) { 1162 case 0: 1163 sc->sc_ppsmask = 0; 1164 break; 1165 1166 case PPS_CAPTUREASSERT: 1167 sc->sc_ppsmask = PL01X_MSR_DCD; 1168 sc->sc_ppsassert = PL01X_MSR_DCD; 1169 sc->sc_ppsclear = -1; 1170 break; 1171 1172 case PPS_CAPTURECLEAR: 1173 sc->sc_ppsmask = PL01X_MSR_DCD; 1174 sc->sc_ppsassert = -1; 1175 sc->sc_ppsclear = 0; 1176 break; 1177 1178 case PPS_CAPTUREBOTH: 1179 sc->sc_ppsmask = PL01X_MSR_DCD; 1180 sc->sc_ppsassert = PL01X_MSR_DCD; 1181 sc->sc_ppsclear = 0; 1182 break; 1183 1184 default: 1185 error = EINVAL; 1186 break; 1187 } 1188 mutex_spin_exit(&timecounter_lock); 1189 break; 1190 } 1191 1192 case PPS_IOC_GETCAP: 1193 *(int*)data = ppscap; 1194 break; 1195 1196 case PPS_IOC_FETCH: { 1197 pps_info_t *pi; 1198 pi = (pps_info_t *)data; 1199 mutex_spin_enter(&timecounter_lock); 1200 *pi = sc->ppsinfo; 1201 mutex_spin_exit(&timecounter_lock); 1202 break; 1203 } 1204 1205 case TIOCDCDTIMESTAMP: /* XXX old, overloaded API used by xntpd v3 */ 1206 /* 1207 * Some GPS clocks models use the falling rather than 1208 * rising edge as the on-the-second signal. 1209 * The old API has no way to specify PPS polarity. 1210 */ 1211 mutex_spin_enter(&timecounter_lock); 1212 sc->sc_ppsmask = PL01X_MSR_DCD; 1213 #ifndef PPS_TRAILING_EDGE 1214 sc->sc_ppsassert = PL01X_MSR_DCD; 1215 sc->sc_ppsclear = -1; 1216 TIMESPEC_TO_TIMEVAL((struct timeval *)data, 1217 &sc->ppsinfo.assert_timestamp); 1218 #else 1219 sc->sc_ppsassert = -1 1220 sc->sc_ppsclear = 0; 1221 TIMESPEC_TO_TIMEVAL((struct timeval *)data, 1222 &sc->ppsinfo.clear_timestamp); 1223 #endif 1224 mutex_spin_exit(&timecounter_lock); 1225 break; 1226 1227 default: 1228 error = EPASSTHROUGH; 1229 break; 1230 } 1231 1232 mutex_spin_exit(&sc->sc_lock); 1233 1234 #ifdef PLCOM_DEBUG 1235 if (plcom_debug) 1236 plcomstatus(sc, "plcomioctl "); 1237 #endif 1238 1239 return error; 1240 } 1241 1242 static inline void 1243 plcom_schedrx(struct plcom_softc *sc) 1244 { 1245 1246 sc->sc_rx_ready = 1; 1247 1248 /* Wake up the poller. */ 1249 softint_schedule(sc->sc_si); 1250 } 1251 1252 void 1253 plcom_break(struct plcom_softc *sc, int onoff) 1254 { 1255 1256 if (onoff) 1257 SET(sc->sc_lcr, PL01X_LCR_BRK); 1258 else 1259 CLR(sc->sc_lcr, PL01X_LCR_BRK); 1260 1261 if (!sc->sc_heldchange) { 1262 if (sc->sc_tx_busy) { 1263 sc->sc_heldtbc = sc->sc_tbc; 1264 sc->sc_tbc = 0; 1265 sc->sc_heldchange = 1; 1266 } else 1267 plcom_loadchannelregs(sc); 1268 } 1269 } 1270 1271 void 1272 plcom_modem(struct plcom_softc *sc, int onoff) 1273 { 1274 1275 if (sc->sc_mcr_dtr == 0) 1276 return; 1277 1278 if (onoff) 1279 SET(sc->sc_mcr, sc->sc_mcr_dtr); 1280 else 1281 CLR(sc->sc_mcr, sc->sc_mcr_dtr); 1282 1283 if (!sc->sc_heldchange) { 1284 if (sc->sc_tx_busy) { 1285 sc->sc_heldtbc = sc->sc_tbc; 1286 sc->sc_tbc = 0; 1287 sc->sc_heldchange = 1; 1288 } else 1289 plcom_loadchannelregs(sc); 1290 } 1291 } 1292 1293 void 1294 tiocm_to_plcom(struct plcom_softc *sc, u_long how, int ttybits) 1295 { 1296 u_char plcombits; 1297 1298 plcombits = 0; 1299 if (ISSET(ttybits, TIOCM_DTR)) 1300 SET(plcombits, PL01X_MCR_DTR); 1301 if (ISSET(ttybits, TIOCM_RTS)) 1302 SET(plcombits, PL01X_MCR_RTS); 1303 1304 switch (how) { 1305 case TIOCMBIC: 1306 CLR(sc->sc_mcr, plcombits); 1307 break; 1308 1309 case TIOCMBIS: 1310 SET(sc->sc_mcr, plcombits); 1311 break; 1312 1313 case TIOCMSET: 1314 CLR(sc->sc_mcr, PL01X_MCR_DTR | PL01X_MCR_RTS); 1315 SET(sc->sc_mcr, plcombits); 1316 break; 1317 } 1318 1319 if (!sc->sc_heldchange) { 1320 if (sc->sc_tx_busy) { 1321 sc->sc_heldtbc = sc->sc_tbc; 1322 sc->sc_tbc = 0; 1323 sc->sc_heldchange = 1; 1324 } else 1325 plcom_loadchannelregs(sc); 1326 } 1327 } 1328 1329 int 1330 plcom_to_tiocm(struct plcom_softc *sc) 1331 { 1332 u_char plcombits; 1333 int ttybits = 0; 1334 1335 plcombits = sc->sc_mcr; 1336 if (ISSET(plcombits, PL01X_MCR_DTR)) 1337 SET(ttybits, TIOCM_DTR); 1338 if (ISSET(plcombits, PL01X_MCR_RTS)) 1339 SET(ttybits, TIOCM_RTS); 1340 1341 plcombits = sc->sc_msr; 1342 if (ISSET(plcombits, PL01X_MSR_DCD)) 1343 SET(ttybits, TIOCM_CD); 1344 if (ISSET(plcombits, PL01X_MSR_CTS)) 1345 SET(ttybits, TIOCM_CTS); 1346 if (ISSET(plcombits, PL01X_MSR_DSR)) 1347 SET(ttybits, TIOCM_DSR); 1348 if (ISSET(plcombits, PL011_MSR_RI)) 1349 SET(ttybits, TIOCM_RI); 1350 1351 if (sc->sc_cr != 0) 1352 SET(ttybits, TIOCM_LE); 1353 1354 return ttybits; 1355 } 1356 1357 static uint32_t 1358 cflag2lcr(tcflag_t cflag) 1359 { 1360 uint32_t lcr = 0; 1361 1362 switch (ISSET(cflag, CSIZE)) { 1363 case CS5: 1364 SET(lcr, PL01X_LCR_5BITS); 1365 break; 1366 case CS6: 1367 SET(lcr, PL01X_LCR_6BITS); 1368 break; 1369 case CS7: 1370 SET(lcr, PL01X_LCR_7BITS); 1371 break; 1372 case CS8: 1373 SET(lcr, PL01X_LCR_8BITS); 1374 break; 1375 } 1376 if (ISSET(cflag, PARENB)) { 1377 SET(lcr, PL01X_LCR_PEN); 1378 if (!ISSET(cflag, PARODD)) 1379 SET(lcr, PL01X_LCR_EPS); 1380 } 1381 if (ISSET(cflag, CSTOPB)) 1382 SET(lcr, PL01X_LCR_STP2); 1383 1384 return lcr; 1385 } 1386 1387 int 1388 plcomparam(struct tty *tp, struct termios *t) 1389 { 1390 struct plcom_softc *sc = 1391 device_lookup_private(&plcom_cd, PLCOMUNIT(tp->t_dev)); 1392 struct plcom_instance *pi = &sc->sc_pi; 1393 int ospeed = -1, lvl; 1394 uint32_t lcr; 1395 1396 if (PLCOM_ISALIVE(sc) == 0) 1397 return EIO; 1398 1399 switch (pi->pi_type) { 1400 case PLCOM_TYPE_PL010: 1401 ospeed = pl010comspeed(t->c_ospeed, sc->sc_frequency); 1402 break; 1403 case PLCOM_TYPE_PL011: 1404 case PLCOM_TYPE_GENERIC_UART: 1405 ospeed = pl011comspeed(t->c_ospeed, sc->sc_frequency); 1406 break; 1407 } 1408 1409 /* Check requested parameters. */ 1410 if (ospeed < 0) 1411 return EINVAL; 1412 if (t->c_ispeed && t->c_ispeed != t->c_ospeed) 1413 return EINVAL; 1414 1415 /* 1416 * For the console, always force CLOCAL and !HUPCL, so that the port 1417 * is always active. 1418 */ 1419 if (ISSET(sc->sc_swflags, TIOCFLAG_SOFTCAR) || 1420 ISSET(sc->sc_hwflags, PLCOM_HW_CONSOLE)) { 1421 SET(t->c_cflag, CLOCAL); 1422 CLR(t->c_cflag, HUPCL); 1423 } 1424 1425 /* 1426 * If there were no changes, don't do anything. This avoids dropping 1427 * input and improves performance when all we did was frob things like 1428 * VMIN and VTIME. 1429 */ 1430 if (tp->t_ospeed == t->c_ospeed && 1431 tp->t_cflag == t->c_cflag) 1432 return 0; 1433 1434 lcr = ISSET(sc->sc_lcr, PL01X_LCR_BRK) | cflag2lcr(t->c_cflag); 1435 1436 mutex_spin_enter(&sc->sc_lock); 1437 1438 sc->sc_lcr = lcr; 1439 1440 /* 1441 * PL010 has a fixed-length FIFO trigger point. 1442 */ 1443 if (ISSET(sc->sc_hwflags, PLCOM_HW_FIFO)) 1444 sc->sc_fifo = 1; 1445 else 1446 sc->sc_fifo = 0; 1447 1448 if (sc->sc_fifo) { 1449 SET(sc->sc_lcr, PL01X_LCR_FEN); 1450 1451 switch (pi->pi_type) { 1452 case PLCOM_TYPE_PL010: 1453 sc->sc_ifls = 0; 1454 break; 1455 case PLCOM_TYPE_PL011: 1456 case PLCOM_TYPE_GENERIC_UART: 1457 lvl = PL011_IFLS_3QUARTERS; 1458 sc->sc_ifls = PL011_IFLS_RXIFLS(lvl); 1459 1460 lvl = PL011_IFLS_1QUARTER; 1461 sc->sc_ifls |= PL011_IFLS_TXIFLS(lvl); 1462 sc->sc_burstlen = uimin(sc->sc_fifolen * 3 / 4, 1); 1463 break; 1464 } 1465 } else 1466 sc->sc_ifls = 0; 1467 1468 /* 1469 * If we're not in a mode that assumes a connection is present, then 1470 * ignore carrier changes. 1471 */ 1472 if (ISSET(t->c_cflag, CLOCAL | MDMBUF)) 1473 sc->sc_msr_dcd = 0; 1474 else 1475 sc->sc_msr_dcd = PL01X_MSR_DCD; 1476 /* 1477 * Set the flow control pins depending on the current flow control 1478 * mode. 1479 */ 1480 if (ISSET(t->c_cflag, CRTSCTS)) { 1481 sc->sc_mcr_dtr = PL01X_MCR_DTR; 1482 1483 switch (pi->pi_type) { 1484 case PLCOM_TYPE_PL010: 1485 sc->sc_mcr_rts = PL01X_MCR_RTS; 1486 sc->sc_msr_cts = PL01X_MSR_CTS; 1487 break; 1488 case PLCOM_TYPE_PL011: 1489 case PLCOM_TYPE_GENERIC_UART: 1490 sc->sc_mcr_rts = 0; 1491 sc->sc_msr_cts = 0; 1492 SET(sc->sc_cr, PL011_CR_CTSEN | PL011_CR_RTSEN); 1493 break; 1494 } 1495 } else if (ISSET(t->c_cflag, MDMBUF)) { 1496 /* 1497 * For DTR/DCD flow control, make sure we don't toggle DTR for 1498 * carrier detection. 1499 */ 1500 sc->sc_mcr_dtr = 0; 1501 sc->sc_mcr_rts = PL01X_MCR_DTR; 1502 sc->sc_msr_cts = PL01X_MSR_DCD; 1503 1504 switch (pi->pi_type) { 1505 case PLCOM_TYPE_PL011: 1506 CLR(sc->sc_cr, PL011_CR_CTSEN | PL011_CR_RTSEN); 1507 break; 1508 } 1509 } else { 1510 /* 1511 * If no flow control, then always set RTS. This will make 1512 * the other side happy if it mistakenly thinks we're doing 1513 * RTS/CTS flow control. 1514 */ 1515 sc->sc_mcr_dtr = PL01X_MCR_DTR | PL01X_MCR_RTS; 1516 sc->sc_mcr_rts = 0; 1517 sc->sc_msr_cts = 0; 1518 if (ISSET(sc->sc_mcr, PL01X_MCR_DTR)) 1519 SET(sc->sc_mcr, PL01X_MCR_RTS); 1520 else 1521 CLR(sc->sc_mcr, PL01X_MCR_RTS); 1522 switch (pi->pi_type) { 1523 case PLCOM_TYPE_PL011: 1524 case PLCOM_TYPE_GENERIC_UART: 1525 CLR(sc->sc_cr, PL011_CR_CTSEN | PL011_CR_RTSEN); 1526 break; 1527 } 1528 } 1529 sc->sc_msr_mask = sc->sc_msr_cts | sc->sc_msr_dcd; 1530 1531 #if 0 1532 if (ospeed == 0) 1533 CLR(sc->sc_mcr, sc->sc_mcr_dtr); 1534 else 1535 SET(sc->sc_mcr, sc->sc_mcr_dtr); 1536 #endif 1537 1538 switch (pi->pi_type) { 1539 case PLCOM_TYPE_PL010: 1540 sc->sc_ratel = ospeed & 0xff; 1541 sc->sc_rateh = (ospeed >> 8) & 0xff; 1542 break; 1543 case PLCOM_TYPE_PL011: 1544 case PLCOM_TYPE_GENERIC_UART: 1545 sc->sc_ratel = ospeed & ((1 << 6) - 1); 1546 sc->sc_rateh = ospeed >> 6; 1547 break; 1548 } 1549 1550 /* And copy to tty. */ 1551 tp->t_ispeed = t->c_ospeed; 1552 tp->t_ospeed = t->c_ospeed; 1553 tp->t_cflag = t->c_cflag; 1554 1555 if (!sc->sc_heldchange) { 1556 if (sc->sc_tx_busy) { 1557 sc->sc_heldtbc = sc->sc_tbc; 1558 sc->sc_tbc = 0; 1559 sc->sc_heldchange = 1; 1560 } else 1561 plcom_loadchannelregs(sc); 1562 } 1563 1564 if (!ISSET(t->c_cflag, CHWFLOW)) { 1565 /* Disable the high water mark. */ 1566 sc->sc_r_hiwat = 0; 1567 sc->sc_r_lowat = 0; 1568 if (ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED)) { 1569 CLR(sc->sc_rx_flags, RX_TTY_OVERFLOWED); 1570 plcom_schedrx(sc); 1571 } 1572 if (ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED)) { 1573 CLR(sc->sc_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED); 1574 plcom_hwiflow(sc); 1575 } 1576 } else { 1577 sc->sc_r_hiwat = plcom_rbuf_hiwat; 1578 sc->sc_r_lowat = plcom_rbuf_lowat; 1579 } 1580 1581 mutex_spin_exit(&sc->sc_lock); 1582 1583 /* 1584 * Update the tty layer's idea of the carrier bit, in case we changed 1585 * CLOCAL or MDMBUF. We don't hang up here; we only do that by 1586 * explicit request. 1587 */ 1588 (void) (*tp->t_linesw->l_modem)(tp, ISSET(sc->sc_msr, PL01X_MSR_DCD)); 1589 1590 #ifdef PLCOM_DEBUG 1591 if (plcom_debug) 1592 plcomstatus(sc, "plcomparam "); 1593 #endif 1594 1595 if (!ISSET(t->c_cflag, CHWFLOW)) { 1596 if (sc->sc_tx_stopped) { 1597 sc->sc_tx_stopped = 0; 1598 plcomstart(tp); 1599 } 1600 } 1601 1602 return 0; 1603 } 1604 1605 void 1606 plcom_iflush(struct plcom_softc *sc) 1607 { 1608 struct plcom_instance *pi = &sc->sc_pi; 1609 #ifdef DIAGNOSTIC 1610 int reg; 1611 #endif 1612 int timo; 1613 1614 #ifdef DIAGNOSTIC 1615 reg = 0xffff; 1616 #endif 1617 timo = 50000; 1618 /* flush any pending I/O */ 1619 while (! ISSET(PREAD1(pi, PL01XCOM_FR), PL01X_FR_RXFE) 1620 && --timo) 1621 #ifdef DIAGNOSTIC 1622 reg = 1623 #else 1624 (void) 1625 #endif 1626 PREAD1(pi, PL01XCOM_DR); 1627 #ifdef DIAGNOSTIC 1628 if (!timo) 1629 aprint_error_dev(sc->sc_dev, ": %s timeout %02x\n", __func__, 1630 reg); 1631 #endif 1632 } 1633 1634 void 1635 plcom_loadchannelregs(struct plcom_softc *sc) 1636 { 1637 struct plcom_instance *pi = &sc->sc_pi; 1638 uint16_t ifls; 1639 1640 /* XXXXX necessary? */ 1641 plcom_iflush(sc); 1642 1643 switch (pi->pi_type) { 1644 case PLCOM_TYPE_PL010: 1645 PWRITE1(pi, PL010COM_CR, 0); 1646 if (sc->sc_frequency != 0) { 1647 PWRITE1(pi, PL010COM_DLBL, sc->sc_ratel); 1648 PWRITE1(pi, PL010COM_DLBH, sc->sc_rateh); 1649 } 1650 PWRITE1(pi, PL010COM_LCR, sc->sc_lcr); 1651 1652 /* XXX device_unit() abuse */ 1653 if (sc->sc_set_mcr) 1654 sc->sc_set_mcr(sc->sc_set_mcr_arg, 1655 device_unit(sc->sc_dev), 1656 sc->sc_mcr_active = sc->sc_mcr); 1657 1658 PWRITE1(pi, PL010COM_CR, sc->sc_cr); 1659 break; 1660 1661 case PLCOM_TYPE_PL011: 1662 case PLCOM_TYPE_GENERIC_UART: 1663 PWRITE2(pi, PL011COM_CR, 0); 1664 if (sc->sc_frequency != 0) { 1665 PWRITE1(pi, PL011COM_FBRD, sc->sc_ratel); 1666 PWRITE4(pi, PL011COM_IBRD, sc->sc_rateh); 1667 } 1668 1669 /* Bits 6..15 are reserved, don't modify, read as zero */ 1670 ifls = PREAD2(pi, PL011COM_IFLS) & ~PL011_IFLS_MASK; 1671 ifls |= sc->sc_ifls & PL011_IFLS_MASK; 1672 PWRITE2(pi, PL011COM_IFLS, ifls); 1673 1674 PWRITE1(pi, PL011COM_LCRH, sc->sc_lcr); 1675 sc->sc_mcr_active = sc->sc_mcr; 1676 CLR(sc->sc_cr, PL011_MCR(PL01X_MCR_RTS | PL01X_MCR_DTR)); 1677 SET(sc->sc_cr, PL011_MCR(sc->sc_mcr_active)); 1678 PWRITE2(pi, PL011COM_CR, sc->sc_cr); 1679 break; 1680 } 1681 } 1682 1683 int 1684 plcomhwiflow(struct tty *tp, int block) 1685 { 1686 struct plcom_softc *sc = 1687 device_lookup_private(&plcom_cd, PLCOMUNIT(tp->t_dev)); 1688 1689 if (PLCOM_ISALIVE(sc) == 0) 1690 return 0; 1691 1692 if (sc->sc_mcr_rts == 0) 1693 return 0; 1694 1695 mutex_spin_enter(&sc->sc_lock); 1696 1697 if (block) { 1698 if (!ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) { 1699 SET(sc->sc_rx_flags, RX_TTY_BLOCKED); 1700 plcom_hwiflow(sc); 1701 } 1702 } else { 1703 if (ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED)) { 1704 CLR(sc->sc_rx_flags, RX_TTY_OVERFLOWED); 1705 plcom_schedrx(sc); 1706 } 1707 if (ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) { 1708 CLR(sc->sc_rx_flags, RX_TTY_BLOCKED); 1709 plcom_hwiflow(sc); 1710 } 1711 } 1712 1713 mutex_spin_exit(&sc->sc_lock); 1714 return 1; 1715 } 1716 1717 /* 1718 * (un)block input via hw flowcontrol 1719 */ 1720 void 1721 plcom_hwiflow(struct plcom_softc *sc) 1722 { 1723 struct plcom_instance *pi = &sc->sc_pi; 1724 1725 if (sc->sc_mcr_rts == 0) 1726 return; 1727 1728 if (ISSET(sc->sc_rx_flags, RX_ANY_BLOCK)) { 1729 CLR(sc->sc_mcr, sc->sc_mcr_rts); 1730 CLR(sc->sc_mcr_active, sc->sc_mcr_rts); 1731 } else { 1732 SET(sc->sc_mcr, sc->sc_mcr_rts); 1733 SET(sc->sc_mcr_active, sc->sc_mcr_rts); 1734 } 1735 switch (pi->pi_type) { 1736 case PLCOM_TYPE_PL010: 1737 if (sc->sc_set_mcr) 1738 /* XXX device_unit() abuse */ 1739 sc->sc_set_mcr(sc->sc_set_mcr_arg, 1740 device_unit(sc->sc_dev), sc->sc_mcr_active); 1741 break; 1742 case PLCOM_TYPE_PL011: 1743 case PLCOM_TYPE_GENERIC_UART: 1744 CLR(sc->sc_cr, PL011_MCR(PL01X_MCR_RTS | PL01X_MCR_DTR)); 1745 SET(sc->sc_cr, PL011_MCR(sc->sc_mcr_active)); 1746 PWRITE2(pi, PL011COM_CR, sc->sc_cr); 1747 break; 1748 } 1749 } 1750 1751 1752 void 1753 plcomstart(struct tty *tp) 1754 { 1755 struct plcom_softc *sc = 1756 device_lookup_private(&plcom_cd, PLCOMUNIT(tp->t_dev)); 1757 struct plcom_instance *pi = &sc->sc_pi; 1758 1759 if (PLCOM_ISALIVE(sc) == 0) 1760 return; 1761 1762 if (ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP)) 1763 return; 1764 if (sc->sc_tx_stopped) 1765 return; 1766 1767 if (!ttypull(tp)) 1768 return; 1769 1770 /* Grab the first contiguous region of buffer space. */ 1771 { 1772 u_char *tba; 1773 int tbc; 1774 1775 tba = tp->t_outq.c_cf; 1776 tbc = ndqb(&tp->t_outq, 0); 1777 1778 mutex_spin_enter(&sc->sc_lock); 1779 1780 sc->sc_tba = tba; 1781 sc->sc_tbc = tbc; 1782 } 1783 1784 SET(tp->t_state, TS_BUSY); 1785 sc->sc_tx_busy = 1; 1786 1787 /* Enable transmit completion interrupts if necessary. */ 1788 switch (pi->pi_type) { 1789 case PLCOM_TYPE_PL010: 1790 if (!ISSET(sc->sc_cr, PL010_CR_TIE)) { 1791 SET(sc->sc_cr, PL010_CR_TIE); 1792 PWRITE1(pi, PL010COM_CR, sc->sc_cr); 1793 } 1794 break; 1795 case PLCOM_TYPE_PL011: 1796 case PLCOM_TYPE_GENERIC_UART: 1797 if (!ISSET(sc->sc_imsc, PL011_INT_TX)) { 1798 SET(sc->sc_imsc, PL011_INT_TX); 1799 PWRITE4(pi, PL011COM_IMSC, sc->sc_imsc); 1800 } 1801 break; 1802 } 1803 1804 /* Output the first chunk of the contiguous buffer. */ 1805 { 1806 int n; 1807 1808 n = sc->sc_tbc; 1809 if (n > sc->sc_burstlen) 1810 n = sc->sc_burstlen; 1811 PWRITEM1(pi, PL01XCOM_DR, sc->sc_tba, n); 1812 sc->sc_tbc -= n; 1813 sc->sc_tba += n; 1814 } 1815 mutex_spin_exit(&sc->sc_lock); 1816 } 1817 1818 /* 1819 * Stop output on a line. 1820 */ 1821 void 1822 plcomstop(struct tty *tp, int flag) 1823 { 1824 struct plcom_softc *sc = 1825 device_lookup_private(&plcom_cd, PLCOMUNIT(tp->t_dev)); 1826 1827 mutex_spin_enter(&sc->sc_lock); 1828 if (ISSET(tp->t_state, TS_BUSY)) { 1829 /* Stop transmitting at the next chunk. */ 1830 sc->sc_tbc = 0; 1831 sc->sc_heldtbc = 0; 1832 if (!ISSET(tp->t_state, TS_TTSTOP)) 1833 SET(tp->t_state, TS_FLUSH); 1834 } 1835 mutex_spin_exit(&sc->sc_lock); 1836 } 1837 1838 void 1839 plcomdiag(void *arg) 1840 { 1841 struct plcom_softc *sc = arg; 1842 int overflows, floods; 1843 1844 mutex_spin_enter(&sc->sc_lock); 1845 overflows = sc->sc_overflows; 1846 sc->sc_overflows = 0; 1847 floods = sc->sc_floods; 1848 sc->sc_floods = 0; 1849 sc->sc_errors = 0; 1850 mutex_spin_exit(&sc->sc_lock); 1851 1852 log(LOG_WARNING, "%s: %d silo overflow%s, %d ibuf flood%s\n", 1853 device_xname(sc->sc_dev), 1854 overflows, overflows == 1 ? "" : "s", 1855 floods, floods == 1 ? "" : "s"); 1856 } 1857 1858 static inline void 1859 plcom_rxsoft(struct plcom_softc *sc, struct tty *tp) 1860 { 1861 int (*rint) (int, struct tty *) = tp->t_linesw->l_rint; 1862 struct plcom_instance *pi = &sc->sc_pi; 1863 u_char *get, *end; 1864 u_int cc, scc; 1865 u_char rsr; 1866 int code; 1867 1868 end = sc->sc_ebuf; 1869 get = sc->sc_rbget; 1870 scc = cc = plcom_rbuf_size - sc->sc_rbavail; 1871 1872 if (cc == plcom_rbuf_size) { 1873 sc->sc_floods++; 1874 if (sc->sc_errors++ == 0) 1875 callout_reset(&sc->sc_diag_callout, 60 * hz, 1876 plcomdiag, sc); 1877 } 1878 1879 while (cc) { 1880 code = get[0]; 1881 rsr = get[1]; 1882 if (ISSET(rsr, PL01X_RSR_ERROR)) { 1883 if (ISSET(rsr, PL01X_RSR_OE)) { 1884 sc->sc_overflows++; 1885 if (sc->sc_errors++ == 0) 1886 callout_reset(&sc->sc_diag_callout, 1887 60 * hz, plcomdiag, sc); 1888 } 1889 if (ISSET(rsr, PL01X_RSR_BE | PL01X_RSR_FE)) 1890 SET(code, TTY_FE); 1891 if (ISSET(rsr, PL01X_RSR_PE)) 1892 SET(code, TTY_PE); 1893 } 1894 if ((*rint)(code, tp) == -1) { 1895 /* 1896 * The line discipline's buffer is out of space. 1897 */ 1898 if (!ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) { 1899 /* 1900 * We're either not using flow control, or the 1901 * line discipline didn't tell us to block for 1902 * some reason. Either way, we have no way to 1903 * know when there's more space available, so 1904 * just drop the rest of the data. 1905 */ 1906 get += cc << 1; 1907 if (get >= end) 1908 get -= plcom_rbuf_size << 1; 1909 cc = 0; 1910 } else { 1911 /* 1912 * Don't schedule any more receive processing 1913 * until the line discipline tells us there's 1914 * space available (through plcomhwiflow()). 1915 * Leave the rest of the data in the input 1916 * buffer. 1917 */ 1918 SET(sc->sc_rx_flags, RX_TTY_OVERFLOWED); 1919 } 1920 break; 1921 } 1922 get += 2; 1923 if (get >= end) 1924 get = sc->sc_rbuf; 1925 cc--; 1926 } 1927 if (cc != scc) { 1928 sc->sc_rbget = get; 1929 mutex_spin_enter(&sc->sc_lock); 1930 1931 cc = sc->sc_rbavail += scc - cc; 1932 /* Buffers should be ok again, release possible block. */ 1933 if (cc >= sc->sc_r_lowat) { 1934 if (ISSET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED)) { 1935 CLR(sc->sc_rx_flags, RX_IBUF_OVERFLOWED); 1936 switch (pi->pi_type) { 1937 case PLCOM_TYPE_PL010: 1938 SET(sc->sc_cr, 1939 PL010_CR_RIE | PL010_CR_RTIE); 1940 PWRITE1(pi, PL010COM_CR, sc->sc_cr); 1941 break; 1942 case PLCOM_TYPE_PL011: 1943 case PLCOM_TYPE_GENERIC_UART: 1944 SET(sc->sc_imsc, 1945 PL011_INT_RX | PL011_INT_RT); 1946 PWRITE4(pi, PL011COM_IMSC, sc->sc_imsc); 1947 break; 1948 } 1949 } 1950 if (ISSET(sc->sc_rx_flags, RX_IBUF_BLOCKED)) { 1951 CLR(sc->sc_rx_flags, RX_IBUF_BLOCKED); 1952 plcom_hwiflow(sc); 1953 } 1954 } 1955 mutex_spin_exit(&sc->sc_lock); 1956 } 1957 } 1958 1959 static inline void 1960 plcom_txsoft(struct plcom_softc *sc, struct tty *tp) 1961 { 1962 1963 CLR(tp->t_state, TS_BUSY); 1964 if (ISSET(tp->t_state, TS_FLUSH)) 1965 CLR(tp->t_state, TS_FLUSH); 1966 else 1967 ndflush(&tp->t_outq, (int)(sc->sc_tba - tp->t_outq.c_cf)); 1968 (*tp->t_linesw->l_start)(tp); 1969 } 1970 1971 static inline void 1972 plcom_stsoft(struct plcom_softc *sc, struct tty *tp) 1973 { 1974 u_char msr, delta; 1975 1976 mutex_spin_enter(&sc->sc_lock); 1977 msr = sc->sc_msr; 1978 delta = sc->sc_msr_delta; 1979 sc->sc_msr_delta = 0; 1980 mutex_spin_exit(&sc->sc_lock); 1981 1982 if (ISSET(delta, sc->sc_msr_dcd)) { 1983 /* 1984 * Inform the tty layer that carrier detect changed. 1985 */ 1986 (void) (*tp->t_linesw->l_modem)(tp, ISSET(msr, PL01X_MSR_DCD)); 1987 } 1988 1989 if (ISSET(delta, sc->sc_msr_cts)) { 1990 /* Block or unblock output according to flow control. */ 1991 if (ISSET(msr, sc->sc_msr_cts)) { 1992 sc->sc_tx_stopped = 0; 1993 (*tp->t_linesw->l_start)(tp); 1994 } else { 1995 sc->sc_tx_stopped = 1; 1996 } 1997 } 1998 1999 #ifdef PLCOM_DEBUG 2000 if (plcom_debug) 2001 plcomstatus(sc, "plcom_stsoft"); 2002 #endif 2003 } 2004 2005 void 2006 plcomsoft(void *arg) 2007 { 2008 struct plcom_softc *sc = arg; 2009 struct tty *tp; 2010 2011 if (PLCOM_ISALIVE(sc) == 0) 2012 return; 2013 2014 tp = sc->sc_tty; 2015 2016 if (sc->sc_rx_ready) { 2017 sc->sc_rx_ready = 0; 2018 plcom_rxsoft(sc, tp); 2019 } 2020 2021 if (sc->sc_st_check) { 2022 sc->sc_st_check = 0; 2023 plcom_stsoft(sc, tp); 2024 } 2025 2026 if (sc->sc_tx_done) { 2027 sc->sc_tx_done = 0; 2028 plcom_txsoft(sc, tp); 2029 } 2030 } 2031 2032 bool 2033 plcom_intstatus(struct plcom_instance *pi, u_int *istatus) 2034 { 2035 bool ret = false; 2036 u_int stat = 0; 2037 2038 switch (pi->pi_type) { 2039 case PLCOM_TYPE_PL010: 2040 stat = PREAD1(pi, PL010COM_IIR); 2041 ret = ISSET(stat, PL010_IIR_IMASK); 2042 break; 2043 case PLCOM_TYPE_PL011: 2044 case PLCOM_TYPE_GENERIC_UART: 2045 stat = PREAD4(pi, PL011COM_MIS); 2046 ret = ISSET(stat, PL011_INT_ALLMASK); 2047 break; 2048 } 2049 *istatus = stat; 2050 2051 return ret; 2052 } 2053 2054 int 2055 plcomintr(void *arg) 2056 { 2057 struct plcom_softc *sc = arg; 2058 struct plcom_instance *pi = &sc->sc_pi; 2059 u_char *put, *end; 2060 u_int cc; 2061 u_int istatus = 0; 2062 u_char rsr; 2063 bool intr = false; 2064 2065 PLCOM_BARRIER(pi, BR | BW); 2066 2067 if (PLCOM_ISALIVE(sc) == 0) 2068 return 0; 2069 2070 mutex_spin_enter(&sc->sc_lock); 2071 intr = plcom_intstatus(pi, &istatus); 2072 if (!intr) { 2073 mutex_spin_exit(&sc->sc_lock); 2074 return 0; 2075 } 2076 2077 end = sc->sc_ebuf; 2078 put = sc->sc_rbput; 2079 cc = sc->sc_rbavail; 2080 2081 do { 2082 u_int msr = 0, delta, fr; 2083 bool rxintr = false, txintr = false, msintr; 2084 2085 /* don't need RI here*/ 2086 fr = PREAD1(pi, PL01XCOM_FR); 2087 2088 if (!ISSET(fr, PL01X_FR_RXFE) && 2089 !ISSET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED)) { 2090 while (cc > 0) { 2091 put[0] = PREAD1(pi, PL01XCOM_DR); 2092 rsr = PREAD1(pi, PL01XCOM_RSR); 2093 /* Clear any error status. */ 2094 if (ISSET(rsr, PL01X_RSR_ERROR)) 2095 PWRITE1(pi, PL01XCOM_ECR, 0); 2096 2097 if (ISSET(rsr, PL01X_RSR_BE)) { 2098 if (cn_check_magic(sc->sc_tty->t_dev, 2099 CNC_BREAK, 2100 &plcom_cnm_state)) { 2101 continue; 2102 } 2103 #if defined(KGDB) 2104 if (ISSET(sc->sc_hwflags, 2105 PLCOM_HW_KGDB)) { 2106 kgdb_connect(1); 2107 continue; 2108 } 2109 #endif 2110 } 2111 2112 put[1] = rsr; 2113 if (cn_check_magic(sc->sc_tty->t_dev, put[0], 2114 &plcom_cnm_state)) { 2115 fr = PREAD1(pi, PL01XCOM_FR); 2116 if (ISSET(fr, PL01X_FR_RXFE)) 2117 break; 2118 continue; 2119 } 2120 put += 2; 2121 if (put >= end) 2122 put = sc->sc_rbuf; 2123 cc--; 2124 2125 /* don't need RI here*/ 2126 fr = PREAD1(pi, PL01XCOM_FR); 2127 if (ISSET(fr, PL01X_FR_RXFE)) 2128 break; 2129 } 2130 2131 /* 2132 * Current string of incoming characters ended because 2133 * no more data was available or we ran out of space. 2134 * Schedule a receive event if any data was received. 2135 * If we're out of space, turn off receive interrupts. 2136 */ 2137 sc->sc_rbput = put; 2138 sc->sc_rbavail = cc; 2139 if (!ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED)) 2140 sc->sc_rx_ready = 1; 2141 2142 /* 2143 * See if we are in danger of overflowing a buffer. If 2144 * so, use hardware flow control to ease the pressure. 2145 */ 2146 if (!ISSET(sc->sc_rx_flags, RX_IBUF_BLOCKED) && 2147 cc < sc->sc_r_hiwat) { 2148 SET(sc->sc_rx_flags, RX_IBUF_BLOCKED); 2149 plcom_hwiflow(sc); 2150 } 2151 2152 /* 2153 * If we're out of space, disable receive interrupts 2154 * until the queue has drained a bit. 2155 */ 2156 if (!cc) { 2157 SET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED); 2158 switch (pi->pi_type) { 2159 case PLCOM_TYPE_PL010: 2160 CLR(sc->sc_cr, 2161 PL010_CR_RIE | PL010_CR_RTIE); 2162 PWRITE1(pi, PL010COM_CR, sc->sc_cr); 2163 break; 2164 case PLCOM_TYPE_PL011: 2165 case PLCOM_TYPE_GENERIC_UART: 2166 CLR(sc->sc_imsc, 2167 PL011_INT_RT | PL011_INT_RX); 2168 PWRITE4(pi, PL011COM_IMSC, sc->sc_imsc); 2169 break; 2170 } 2171 } 2172 } else { 2173 switch (pi->pi_type) { 2174 case PLCOM_TYPE_PL010: 2175 rxintr = ISSET(istatus, PL010_IIR_RIS); 2176 if (rxintr) { 2177 PWRITE1(pi, PL010COM_CR, 0); 2178 delay(10); 2179 PWRITE1(pi, PL010COM_CR, sc->sc_cr); 2180 continue; 2181 } 2182 break; 2183 case PLCOM_TYPE_PL011: 2184 case PLCOM_TYPE_GENERIC_UART: 2185 rxintr = ISSET(istatus, PL011_INT_RX); 2186 if (rxintr) { 2187 PWRITE2(pi, PL011COM_CR, 0); 2188 delay(10); 2189 PWRITE2(pi, PL011COM_CR, sc->sc_cr); 2190 continue; 2191 } 2192 break; 2193 } 2194 } 2195 2196 switch (pi->pi_type) { 2197 case PLCOM_TYPE_PL010: 2198 msr = PREAD1(pi, PL01XCOM_FR); 2199 break; 2200 case PLCOM_TYPE_PL011: 2201 case PLCOM_TYPE_GENERIC_UART: 2202 msr = PREAD4(pi, PL01XCOM_FR); 2203 break; 2204 } 2205 delta = msr ^ sc->sc_msr; 2206 sc->sc_msr = msr; 2207 2208 /* Clear any pending modem status interrupt. */ 2209 switch (pi->pi_type) { 2210 case PLCOM_TYPE_PL010: 2211 msintr = ISSET(istatus, PL010_IIR_MIS); 2212 if (msintr) { 2213 PWRITE1(pi, PL010COM_ICR, 0); 2214 } 2215 break; 2216 case PLCOM_TYPE_PL011: 2217 case PLCOM_TYPE_GENERIC_UART: 2218 msintr = ISSET(istatus, PL011_INT_MSMASK); 2219 if (msintr) { 2220 PWRITE4(pi, PL011COM_ICR, PL011_INT_MSMASK); 2221 } 2222 break; 2223 } 2224 /* 2225 * Pulse-per-second (PSS) signals on edge of DCD? 2226 * Process these even if line discipline is ignoring DCD. 2227 */ 2228 if (delta & sc->sc_ppsmask) { 2229 struct timeval tv; 2230 mutex_spin_enter(&timecounter_lock); 2231 if ((msr & sc->sc_ppsmask) == sc->sc_ppsassert) { 2232 /* XXX nanotime() */ 2233 microtime(&tv); 2234 TIMEVAL_TO_TIMESPEC(&tv, 2235 &sc->ppsinfo.assert_timestamp); 2236 if (sc->ppsparam.mode & PPS_OFFSETASSERT) { 2237 timespecadd(&sc->ppsinfo.assert_timestamp, 2238 &sc->ppsparam.assert_offset, 2239 &sc->ppsinfo.assert_timestamp); 2240 } 2241 2242 #ifdef PPS_SYNC 2243 if (sc->ppsparam.mode & PPS_HARDPPSONASSERT) 2244 hardpps(&tv, tv.tv_usec); 2245 #endif 2246 sc->ppsinfo.assert_sequence++; 2247 sc->ppsinfo.current_mode = sc->ppsparam.mode; 2248 2249 } else if ((msr & sc->sc_ppsmask) == sc->sc_ppsclear) { 2250 /* XXX nanotime() */ 2251 microtime(&tv); 2252 TIMEVAL_TO_TIMESPEC(&tv, 2253 &sc->ppsinfo.clear_timestamp); 2254 if (sc->ppsparam.mode & PPS_OFFSETCLEAR) { 2255 timespecadd(&sc->ppsinfo.clear_timestamp, 2256 &sc->ppsparam.clear_offset, 2257 &sc->ppsinfo.clear_timestamp); 2258 } 2259 2260 #ifdef PPS_SYNC 2261 if (sc->ppsparam.mode & PPS_HARDPPSONCLEAR) 2262 hardpps(&tv, tv.tv_usec); 2263 #endif 2264 sc->ppsinfo.clear_sequence++; 2265 sc->ppsinfo.current_mode = sc->ppsparam.mode; 2266 } 2267 mutex_spin_exit(&timecounter_lock); 2268 } 2269 2270 /* 2271 * Process normal status changes 2272 */ 2273 if (ISSET(delta, sc->sc_msr_mask)) { 2274 SET(sc->sc_msr_delta, delta); 2275 2276 /* 2277 * Stop output immediately if we lose the output 2278 * flow control signal or carrier detect. 2279 */ 2280 if (ISSET(~msr, sc->sc_msr_mask)) { 2281 sc->sc_tbc = 0; 2282 sc->sc_heldtbc = 0; 2283 #ifdef PLCOM_DEBUG 2284 if (plcom_debug) 2285 plcomstatus(sc, "plcomintr "); 2286 #endif 2287 } 2288 2289 sc->sc_st_check = 1; 2290 } 2291 2292 /* 2293 * Done handling any receive interrupts. See if data 2294 * can be transmitted as well. Schedule tx done 2295 * event if no data left and tty was marked busy. 2296 */ 2297 2298 switch (pi->pi_type) { 2299 case PLCOM_TYPE_PL010: 2300 txintr = ISSET(istatus, PL010_IIR_TIS); 2301 break; 2302 case PLCOM_TYPE_PL011: 2303 txintr = ISSET(istatus, PL011_INT_TX); 2304 break; 2305 } 2306 if (txintr) { 2307 /* 2308 * If we've delayed a parameter change, do it 2309 * now, and restart * output. 2310 */ 2311 // PWRITE4(pi, PL011COM_ICR, PL011_INT_TX); 2312 if (sc->sc_heldchange) { 2313 plcom_loadchannelregs(sc); 2314 sc->sc_heldchange = 0; 2315 sc->sc_tbc = sc->sc_heldtbc; 2316 sc->sc_heldtbc = 0; 2317 } 2318 2319 /* 2320 * Output the next chunk of the contiguous 2321 * buffer, if any. 2322 */ 2323 if (sc->sc_tbc > 0) { 2324 int n; 2325 2326 n = sc->sc_tbc; 2327 if (n > sc->sc_burstlen) 2328 n = sc->sc_burstlen; 2329 PWRITEM1(pi, PL01XCOM_DR, sc->sc_tba, n); 2330 sc->sc_tbc -= n; 2331 sc->sc_tba += n; 2332 } else { 2333 /* 2334 * Disable transmit completion 2335 * interrupts if necessary. 2336 */ 2337 switch (pi->pi_type) { 2338 case PLCOM_TYPE_PL010: 2339 if (ISSET(sc->sc_cr, PL010_CR_TIE)) { 2340 CLR(sc->sc_cr, PL010_CR_TIE); 2341 PWRITE1(pi, PL010COM_CR, 2342 sc->sc_cr); 2343 } 2344 break; 2345 case PLCOM_TYPE_PL011: 2346 case PLCOM_TYPE_GENERIC_UART: 2347 if (ISSET(sc->sc_imsc, PL011_INT_TX)) { 2348 CLR(sc->sc_imsc, PL011_INT_TX); 2349 PWRITE4(pi, PL011COM_IMSC, 2350 sc->sc_imsc); 2351 } 2352 break; 2353 } 2354 if (sc->sc_tx_busy) { 2355 sc->sc_tx_busy = 0; 2356 sc->sc_tx_done = 1; 2357 } 2358 } 2359 } 2360 2361 } while (plcom_intstatus(pi, &istatus)); 2362 2363 mutex_spin_exit(&sc->sc_lock); 2364 2365 /* Wake up the poller. */ 2366 if ((sc->sc_rx_ready | sc->sc_st_check | sc->sc_tx_done) != 0) 2367 softint_schedule(sc->sc_si); 2368 2369 #ifdef RND_COM 2370 rnd_add_uint32(&sc->rnd_source, istatus | rsr); 2371 #endif 2372 2373 PLCOM_BARRIER(pi, BR | BW); 2374 2375 return 1; 2376 } 2377 2378 /* 2379 * The following functions are polled getc and putc routines, shared 2380 * by the console and kgdb glue. 2381 * 2382 * The read-ahead code is so that you can detect pending in-band 2383 * cn_magic in polled mode while doing output rather than having to 2384 * wait until the kernel decides it needs input. 2385 */ 2386 2387 #define MAX_READAHEAD 20 2388 static int plcom_readahead[MAX_READAHEAD]; 2389 static int plcom_readaheadcount = 0; 2390 2391 int 2392 plcom_common_getc(dev_t dev, struct plcom_instance *pi) 2393 { 2394 int s = splserial(); 2395 u_char c; 2396 2397 /* got a character from reading things earlier */ 2398 if (plcom_readaheadcount > 0) { 2399 int i; 2400 2401 c = plcom_readahead[0]; 2402 for (i = 1; i < plcom_readaheadcount; i++) { 2403 plcom_readahead[i-1] = plcom_readahead[i]; 2404 } 2405 plcom_readaheadcount--; 2406 splx(s); 2407 return c; 2408 } 2409 2410 if (ISSET(PREAD1(pi, PL01XCOM_FR), PL01X_FR_RXFE)) { 2411 splx(s); 2412 return -1; 2413 } 2414 2415 c = PREAD1(pi, PL01XCOM_DR); 2416 2417 cn_check_magic(dev, c, &plcom_cnm_state); 2418 2419 splx(s); 2420 return c; 2421 } 2422 2423 void 2424 plcom_common_putc(dev_t dev, struct plcom_instance *pi, int c) 2425 { 2426 int s = splserial(); 2427 int timo; 2428 2429 int cin, stat; 2430 if (plcom_readaheadcount < MAX_READAHEAD 2431 && !ISSET(stat = PREAD1(pi, PL01XCOM_FR), PL01X_FR_RXFE)) { 2432 cin = PREAD1(pi, PL01XCOM_DR); 2433 cn_check_magic(dev, cin, &plcom_cnm_state); 2434 plcom_readahead[plcom_readaheadcount++] = cin; 2435 } 2436 2437 /* wait for any pending transmission to finish */ 2438 timo = 150000; 2439 while (ISSET(PREAD1(pi, PL01XCOM_FR), PL01X_FR_TXFF) && --timo) 2440 continue; 2441 2442 PWRITE1(pi, PL01XCOM_DR, c); 2443 PLCOM_BARRIER(pi, BR | BW); 2444 2445 splx(s); 2446 } 2447 2448 /* 2449 * Initialize UART for use as console or KGDB line. 2450 */ 2451 int 2452 plcominit(struct plcom_instance *pi, int rate, int frequency, tcflag_t cflag) 2453 { 2454 uint32_t lcr; 2455 2456 switch (pi->pi_type) { 2457 case PLCOM_TYPE_PL010: 2458 if (pi->pi_size == 0) 2459 pi->pi_size = PL010COM_UART_SIZE; 2460 break; 2461 case PLCOM_TYPE_PL011: 2462 case PLCOM_TYPE_GENERIC_UART: 2463 if (pi->pi_size == 0) 2464 pi->pi_size = PL011COM_UART_SIZE; 2465 break; 2466 default: 2467 panic("Unknown plcom type"); 2468 } 2469 2470 if (bus_space_map(pi->pi_iot, pi->pi_iobase, pi->pi_size, 0, 2471 &pi->pi_ioh)) 2472 return ENOMEM; /* ??? */ 2473 2474 lcr = cflag2lcr(cflag) | PL01X_LCR_FEN; 2475 switch (pi->pi_type) { 2476 case PLCOM_TYPE_PL010: 2477 PWRITE1(pi, PL010COM_CR, 0); 2478 2479 if (rate && frequency) { 2480 rate = pl010comspeed(rate, frequency); 2481 PWRITE1(pi, PL010COM_DLBL, (rate & 0xff)); 2482 PWRITE1(pi, PL010COM_DLBH, ((rate >> 8) & 0xff)); 2483 } 2484 PWRITE1(pi, PL010COM_LCR, lcr); 2485 PWRITE1(pi, PL010COM_CR, PL01X_CR_UARTEN); 2486 break; 2487 case PLCOM_TYPE_PL011: 2488 case PLCOM_TYPE_GENERIC_UART: 2489 PWRITE2(pi, PL011COM_CR, 0); 2490 2491 if (rate && frequency) { 2492 rate = pl011comspeed(rate, frequency); 2493 PWRITE1(pi, PL011COM_FBRD, rate & ((1 << 6) - 1)); 2494 PWRITE4(pi, PL011COM_IBRD, rate >> 6); 2495 } 2496 PWRITE1(pi, PL011COM_LCRH, lcr); 2497 PWRITE2(pi, PL011COM_CR, 2498 PL01X_CR_UARTEN | PL011_CR_RXE | PL011_CR_TXE); 2499 break; 2500 } 2501 2502 #if 0 2503 /* Ought to do something like this, but we have no sc to 2504 dereference. */ 2505 /* XXX device_unit() abuse */ 2506 sc->sc_set_mcr(sc->sc_set_mcr_arg, device_unit(sc->sc_dev), 2507 PL01X_MCR_DTR | PL01X_MCR_RTS); 2508 #endif 2509 2510 return 0; 2511 } 2512 2513 /* 2514 * Following are all routines needed for PLCOM to act as console 2515 */ 2516 struct consdev plcomcons = { 2517 NULL, NULL, plcomcngetc, plcomcnputc, plcomcnpollc, NULL, 2518 plcomcnhalt, NULL, NODEV, CN_NORMAL 2519 }; 2520 2521 int 2522 plcomcnattach(struct plcom_instance *pi, int rate, int frequency, 2523 tcflag_t cflag, int unit) 2524 { 2525 int res; 2526 2527 plcomcons_info = *pi; 2528 2529 res = plcominit(&plcomcons_info, rate, frequency, cflag); 2530 if (res) 2531 return res; 2532 2533 cn_tab = &plcomcons; 2534 cn_init_magic(&plcom_cnm_state); 2535 cn_set_magic("\047\001"); /* default magic is BREAK */ 2536 2537 plcomconsunit = unit; 2538 plcomconsrate = rate; 2539 plcomconscflag = cflag; 2540 2541 return 0; 2542 } 2543 2544 void 2545 plcomcndetach(void) 2546 { 2547 2548 bus_space_unmap(plcomcons_info.pi_iot, plcomcons_info.pi_ioh, 2549 plcomcons_info.pi_size); 2550 plcomcons_info.pi_iot = NULL; 2551 2552 cn_tab = NULL; 2553 } 2554 2555 int 2556 plcomcngetc(dev_t dev) 2557 { 2558 return plcom_common_getc(dev, &plcomcons_info); 2559 } 2560 2561 /* 2562 * Console kernel output character routine. 2563 */ 2564 void 2565 plcomcnputc(dev_t dev, int c) 2566 { 2567 plcom_common_putc(dev, &plcomcons_info, c); 2568 } 2569 2570 void 2571 plcomcnpollc(dev_t dev, int on) 2572 { 2573 2574 plcom_readaheadcount = 0; 2575 } 2576 2577 void 2578 plcomcnhalt(dev_t dev) 2579 { 2580 struct plcom_instance *pi = &plcomcons_info; 2581 2582 switch (pi->pi_type) { 2583 case PLCOM_TYPE_PL010: 2584 PWRITE1(pi, PL010COM_CR, PL01X_CR_UARTEN); 2585 break; 2586 case PLCOM_TYPE_PL011: 2587 case PLCOM_TYPE_GENERIC_UART: 2588 PWRITE2(pi, PL011COM_CR, 2589 PL01X_CR_UARTEN | PL011_CR_RXE | PL011_CR_TXE); 2590 PWRITE4(pi, PL011COM_IMSC, 0); 2591 break; 2592 } 2593 } 2594 2595 #ifdef KGDB 2596 int 2597 plcom_kgdb_attach(struct plcom_instance *pi, int rate, int frequency, 2598 tcflag_t cflag, int unit) 2599 { 2600 int res; 2601 2602 if (pi->pi_iot == plcomcons_info.pi_iot && 2603 pi->pi_iobase == plcomcons_info.pi_iobase) 2604 return EBUSY; /* cannot share with console */ 2605 2606 res = plcominit(pi, rate, frequency, cflag); 2607 if (res) 2608 return res; 2609 2610 kgdb_attach(plcom_kgdb_getc, plcom_kgdb_putc, NULL); 2611 kgdb_dev = 123; /* unneeded, only to satisfy some tests */ 2612 2613 plcomkgdb_info.pi_iot = pi->pi_iot; 2614 plcomkgdb_info.pi_ioh = pi->pi_ioh; 2615 plcomkgdb_info.pi_iobase = pi->pi_iobase; 2616 2617 return 0; 2618 } 2619 2620 /* ARGSUSED */ 2621 int 2622 plcom_kgdb_getc(void *arg) 2623 { 2624 return plcom_common_getc(NODEV, &plcomkgdb_info); 2625 } 2626 2627 /* ARGSUSED */ 2628 void 2629 plcom_kgdb_putc(void *arg, int c) 2630 { 2631 plcom_common_putc(NODEV, &plcomkgdb_info, c); 2632 } 2633 #endif /* KGDB */ 2634 2635 /* helper function to identify the plcom ports used by 2636 console or KGDB (and not yet autoconf attached) */ 2637 int 2638 plcom_is_console(bus_space_tag_t iot, bus_addr_t iobase, 2639 bus_space_handle_t *ioh) 2640 { 2641 bus_space_handle_t help; 2642 2643 if (!plcomconsattached && 2644 bus_space_is_equal(iot, plcomcons_info.pi_iot) && 2645 iobase == plcomcons_info.pi_iobase) 2646 help = plcomcons_info.pi_ioh; 2647 #ifdef KGDB 2648 else if (!plcom_kgdb_attached && 2649 bus_space_is_equal(iot, plcomkgdb_info.pi_iot) && 2650 iobase == plcomkgdb_info.pi_iobase) 2651 help = plcomkgdb_info.pi_ioh; 2652 #endif 2653 else 2654 return 0; 2655 2656 if (ioh) 2657 *ioh = help; 2658 return 1; 2659 } 2660