1 /* $NetBSD: com.c,v 1.393 2026/11/10 03:05:01 thorpej Exp $ */ 2 3 /*- 4 * Copyright (c) 1998, 1999, 2004, 2008 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Charles M. Hannum. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * Copyright (c) 1991 The Regents of the University of California. 34 * All rights reserved. 35 * 36 * Redistribution and use in source and binary forms, with or without 37 * modification, are permitted provided that the following conditions 38 * are met: 39 * 1. Redistributions of source code must retain the above copyright 40 * notice, this list of conditions and the following disclaimer. 41 * 2. Redistributions in binary form must reproduce the above copyright 42 * notice, this list of conditions and the following disclaimer in the 43 * documentation and/or other materials provided with the distribution. 44 * 3. Neither the name of the University nor the names of its contributors 45 * may be used to endorse or promote products derived from this software 46 * without specific prior written permission. 47 * 48 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 49 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 50 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 51 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 52 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 53 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 54 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 55 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 56 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 57 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 58 * SUCH DAMAGE. 59 * 60 * @(#)com.c 7.5 (Berkeley) 5/16/91 61 */ 62 63 /* 64 * COM driver, uses National Semiconductor NS16450/NS16550AF UART 65 * Supports automatic hardware flow control on StarTech ST16C650A UART 66 * 67 * Lock order (when sc_softirq is false): 68 * ttylock (IPL_VM) 69 * -> sc->sc_lock (IPL_HIGH) 70 * -> timecounter_lock (IPL_HIGH) 71 * 72 * When sc_softirq is true, the ttylock is dropped or avoided and 73 * sc->sc_lock is run at IPL_SOFTSERIAL 74 * 75 */ 76 77 #include <sys/cdefs.h> 78 __KERNEL_RCSID(0, "$NetBSD: com.c,v 1.393 2026/11/10 03:05:01 thorpej Exp $"); 79 80 #include "opt_com.h" 81 #include "opt_ddb.h" 82 #include "opt_kgdb.h" 83 #include "opt_lockdebug.h" 84 #include "opt_multiprocessor.h" 85 #include "opt_ntp.h" 86 87 /* The COM16650 option was renamed to COM_16650. */ 88 #ifdef COM16650 89 #error Obsolete COM16650 option; use COM_16650 instead. 90 #endif 91 92 #include <sys/param.h> 93 #include <sys/systm.h> 94 #include <sys/ioctl.h> 95 #include <sys/select.h> 96 #include <sys/poll.h> 97 #include <sys/tty.h> 98 #include <sys/proc.h> 99 #include <sys/conf.h> 100 #include <sys/file.h> 101 #include <sys/uio.h> 102 #include <sys/kernel.h> 103 #include <sys/syslog.h> 104 #include <sys/device.h> 105 #include <sys/malloc.h> 106 #include <sys/timepps.h> 107 #include <sys/vnode.h> 108 #include <sys/kauth.h> 109 #include <sys/intr.h> 110 #include <sys/workqueue.h> 111 #ifdef RND_COM 112 #include <sys/rndsource.h> 113 #endif 114 115 #include <sys/bus.h> 116 117 #include <dev/ic/comreg.h> 118 #include <dev/ic/comvar.h> 119 #include <dev/ic/ns16550reg.h> 120 #include <dev/ic/st16650reg.h> 121 #include <dev/ic/hayespreg.h> 122 #define com_lcr com_cfcr 123 #include <dev/cons.h> 124 125 #include "ioconf.h" 126 127 #define CSR_READ_1(r, o) \ 128 (r)->cr_read((r), (r)->cr_map[o]) 129 #define CSR_WRITE_1(r, o, v) \ 130 (r)->cr_write((r), (r)->cr_map[o], (v)) 131 #define CSR_WRITE_MULTI(r, o, p, n) \ 132 (r)->cr_write_multi((r), (r)->cr_map[o], (p), (n)) 133 134 /* 135 * XXX COM_TYPE_AU1x00 specific 136 */ 137 #define CSR_WRITE_2(r, o, v) \ 138 bus_space_write_2((r)->cr_iot, (r)->cr_ioh, (r)->cr_map[o], v) 139 #define CSR_READ_2(r, o) \ 140 bus_space_read_2((r)->cr_iot, (r)->cr_ioh, (r)->cr_map[o]) 141 142 /* Out of band error */ 143 #define CSR_HAS_ERROR(r) \ 144 (r)->cr_has_errored 145 146 static void com_enable_debugport(struct com_softc *); 147 148 void com_config(struct com_softc *); 149 void com_shutdown(struct com_softc *); 150 int comspeed(long, long, int); 151 static u_char cflag2lcr(tcflag_t); 152 int comparam(struct tty *, struct termios *); 153 void comstart(struct tty *); 154 void comstartsoft(struct tty *); 155 int comhwiflow(struct tty *, int); 156 int comhwiflowsoft(struct tty *, int); 157 158 void com_loadchannelregs(struct com_softc *); 159 void com_hwiflow(struct com_softc *); 160 void com_break(struct com_softc *, int); 161 void com_modem(struct com_softc *, int); 162 void tiocm_to_com(struct com_softc *, u_long, int); 163 int com_to_tiocm(struct com_softc *); 164 void com_iflush(struct com_softc *); 165 166 int com_common_getc(dev_t, struct com_regs *); 167 static void com_common_putc(dev_t, struct com_regs *, int, int); 168 169 int cominit(struct com_regs *, int, int, int, tcflag_t); 170 171 static int comcnreattach(void); 172 173 int comcngetc(dev_t); 174 void comcnputc(dev_t, int); 175 void comcnpollc(dev_t, int); 176 177 void comsoft(void *); 178 static void comsoftwq(struct work *, void *); 179 static inline void com_rxsoft(struct com_softc *, struct tty *); 180 static inline void com_txsoft(struct com_softc *, struct tty *); 181 static inline void com_stsoft(struct com_softc *, struct tty *); 182 static inline void com_schedrx(struct com_softc *); 183 void comdiag(void *); 184 185 dev_type_open(comopen); 186 dev_type_close(comclose); 187 dev_type_read(comread); 188 dev_type_write(comwrite); 189 dev_type_ioctl(comioctl); 190 dev_type_stop(comstop); 191 dev_type_tty(comtty); 192 dev_type_poll(compoll); 193 194 static struct comcons_info comcons_info; 195 196 /* 197 * Following are all routines needed for COM to act as console 198 */ 199 static struct consdev comcons = { 200 .cn_getc = comcngetc, 201 .cn_putc = comcnputc, 202 .cn_pollc = comcnpollc, 203 .cn_dev = NODEV, 204 .cn_pri = CN_NORMAL 205 }; 206 207 208 const struct cdevsw com_cdevsw = { 209 .d_open = comopen, 210 .d_close = comclose, 211 .d_read = comread, 212 .d_write = comwrite, 213 .d_ioctl = comioctl, 214 .d_stop = comstop, 215 .d_tty = comtty, 216 .d_poll = compoll, 217 .d_mmap = nommap, 218 .d_kqfilter = ttykqfilter, 219 .d_discard = nodiscard, 220 .d_flag = D_TTY 221 }; 222 223 /* 224 * Make this an option variable one can patch. 225 * But be warned: this must be a power of 2! 226 */ 227 u_int com_rbuf_size = COM_RING_SIZE; 228 229 /* Stop input when 3/4 of the ring is full; restart when only 1/4 is full. */ 230 u_int com_rbuf_hiwat = (COM_RING_SIZE * 1) / 4; 231 u_int com_rbuf_lowat = (COM_RING_SIZE * 3) / 4; 232 233 static int comconsattached; 234 static struct cnm_state com_cnm_state; 235 236 #ifdef KGDB 237 #include <sys/kgdb.h> 238 239 static struct com_regs comkgdbregs; 240 static int com_kgdb_attached; 241 242 int com_kgdb_getc(void *); 243 void com_kgdb_putc(void *, int); 244 #endif /* KGDB */ 245 246 /* initializer for typical 16550-ish hardware */ 247 static const bus_size_t com_std_map[COM_REGMAP_NENTRIES] = { 248 [COM_REG_RXDATA] = com_data, 249 [COM_REG_TXDATA] = com_data, 250 [COM_REG_DLBL] = com_dlbl, 251 [COM_REG_DLBH] = com_dlbh, 252 [COM_REG_IER] = com_ier, 253 [COM_REG_IIR] = com_iir, 254 [COM_REG_FIFO] = com_fifo, 255 [COM_REG_TCR] = com_fifo, 256 [COM_REG_EFR] = com_efr, 257 [COM_REG_TLR] = com_efr, 258 [COM_REG_LCR] = com_lcr, 259 [COM_REG_MCR] = com_mcr, 260 [COM_REG_LSR] = com_lsr, 261 [COM_REG_MSR] = com_msr, 262 [COM_REG_USR] = com_usr, 263 [COM_REG_TFL] = com_tfl, 264 [COM_REG_RFL] = com_rfl, 265 [COM_REG_HALT] = com_halt, 266 [COM_REG_MDR1] = com_mdr1, 267 }; 268 269 #define COMDIALOUT_MASK TTDIALOUT_MASK 270 271 #define COMUNIT(x) TTUNIT(x) 272 #define COMDIALOUT(x) TTDIALOUT(x) 273 274 #define COM_ISALIVE(sc) ((sc)->enabled != 0 && \ 275 device_is_active((sc)->sc_dev)) 276 277 #define BR BUS_SPACE_BARRIER_READ 278 #define BW BUS_SPACE_BARRIER_WRITE 279 #define COM_BARRIER(r, f) \ 280 bus_space_barrier((r)->cr_iot, (r)->cr_ioh, 0, (r)->cr_nports, (f)) 281 282 /* Wrap the mutex calls to pick which varient we need to be using */ 283 284 static void 285 com_mutex_enter(struct com_softc *sc) 286 { 287 if (ISSET(sc->sc_hwflags, COM_HW_SOFTIRQ)) 288 mutex_enter(&sc->sc_lock); 289 else 290 mutex_spin_enter(&sc->sc_lock); 291 } 292 293 static void 294 com_mutex_exit(struct com_softc *sc) 295 { 296 if (ISSET(sc->sc_hwflags, COM_HW_SOFTIRQ)) 297 mutex_exit(&sc->sc_lock); 298 else 299 mutex_spin_exit(&sc->sc_lock); 300 } 301 302 /* 303 * com_read_1 -- 304 * Default register read callback using single byte accesses. 305 */ 306 static uint8_t 307 com_read_1(struct com_regs *regs, u_int reg) 308 { 309 return bus_space_read_1(regs->cr_iot, regs->cr_ioh, reg); 310 } 311 312 /* 313 * com_write_1 -- 314 * Default register write callback using single byte accesses. 315 */ 316 static void 317 com_write_1(struct com_regs *regs, u_int reg, uint8_t val) 318 { 319 bus_space_write_1(regs->cr_iot, regs->cr_ioh, reg, val); 320 } 321 322 /* 323 * com_write_multi_1 -- 324 * Default register multi write callback using single byte accesses. 325 */ 326 static void 327 com_write_multi_1(struct com_regs *regs, u_int reg, const uint8_t *datap, 328 bus_size_t count) 329 { 330 bus_space_write_multi_1(regs->cr_iot, regs->cr_ioh, reg, datap, count); 331 } 332 333 /* 334 * com_read_4 -- 335 * Default register read callback using dword accesses. 336 */ 337 static uint8_t 338 com_read_4(struct com_regs *regs, u_int reg) 339 { 340 return bus_space_read_4(regs->cr_iot, regs->cr_ioh, reg) & 0xff; 341 } 342 343 /* 344 * com_write_4 -- 345 * Default register write callback using dword accesses. 346 */ 347 static void 348 com_write_4(struct com_regs *regs, u_int reg, uint8_t val) 349 { 350 bus_space_write_4(regs->cr_iot, regs->cr_ioh, reg, val); 351 } 352 353 /* 354 * com_write_multi_4 -- 355 * Default register multi write callback using dword accesses. 356 */ 357 static void 358 com_write_multi_4(struct com_regs *regs, u_int reg, const uint8_t *datap, 359 bus_size_t count) 360 { 361 while (count-- > 0) { 362 bus_space_write_4(regs->cr_iot, regs->cr_ioh, reg, *datap++); 363 } 364 } 365 366 /* 367 * com_init_regs -- 368 * Driver front-ends use this to initialize our register map 369 * in the standard fashion. They may then tailor the map to 370 * their own particular requirements. 371 */ 372 void 373 com_init_regs(struct com_regs *regs, bus_space_tag_t st, bus_space_handle_t sh, 374 bus_addr_t addr) 375 { 376 377 memset(regs, 0, sizeof(*regs)); 378 regs->cr_has_errored = false; 379 regs->cr_iot = st; 380 regs->cr_ioh = sh; 381 regs->cr_iobase = addr; 382 regs->cr_nports = COM_NPORTS; 383 regs->cr_read = com_read_1; 384 regs->cr_write = com_write_1; 385 regs->cr_write_multi = com_write_multi_1; 386 memcpy(regs->cr_map, com_std_map, sizeof(regs->cr_map)); 387 } 388 389 /* 390 * com_init_regs_stride -- 391 * Convenience function for front-ends that have a stride between 392 * registers. 393 */ 394 void 395 com_init_regs_stride(struct com_regs *regs, bus_space_tag_t st, 396 bus_space_handle_t sh, bus_addr_t addr, u_int regshift) 397 { 398 399 com_init_regs(regs, st, sh, addr); 400 for (size_t i = 0; i < __arraycount(regs->cr_map); i++) { 401 regs->cr_map[i] <<= regshift; 402 } 403 regs->cr_nports <<= regshift; 404 } 405 406 /* 407 * com_init_regs_stride_width -- 408 * Convenience function for front-ends that have a stride between 409 * registers and specific I/O width requirements. 410 */ 411 void 412 com_init_regs_stride_width(struct com_regs *regs, bus_space_tag_t st, 413 bus_space_handle_t sh, bus_addr_t addr, 414 u_int regshift, u_int width) 415 { 416 417 com_init_regs(regs, st, sh, addr); 418 for (size_t i = 0; i < __arraycount(regs->cr_map); i++) { 419 regs->cr_map[i] <<= regshift; 420 } 421 regs->cr_nports <<= regshift; 422 423 switch (width) { 424 case 1: 425 /* Already set by com_init_regs */ 426 break; 427 case 4: 428 regs->cr_read = com_read_4; 429 regs->cr_write = com_write_4; 430 regs->cr_write_multi = com_write_multi_4; 431 break; 432 default: 433 panic("com: unsupported I/O width %d", width); 434 } 435 } 436 437 /*ARGSUSED*/ 438 int 439 comspeed(long speed, long frequency, int type) 440 { 441 #define divrnd(n, q) (((n)*2/(q)+1)/2) /* divide and round off */ 442 443 int x, err; 444 int divisor = 16; 445 446 if ((type == COM_TYPE_OMAP) && (speed > 230400)) { 447 divisor = 13; 448 } 449 450 if (speed == 0) 451 return (0); 452 if (speed < 0) 453 return (-1); 454 x = divrnd(frequency / divisor, speed); 455 if (x <= 0) 456 return (-1); 457 err = divrnd(((quad_t)frequency) * 1000 / divisor, speed * x) - 1000; 458 if (err < 0) 459 err = -err; 460 if (err > COM_TOLERANCE) 461 return (-1); 462 if (x > 65535) /* There are only 16 bits for the divider. */ 463 return (-1); 464 return (x); 465 466 #undef divrnd 467 } 468 469 #ifdef COM_DEBUG 470 int com_debug = 0; 471 472 void comstatus(struct com_softc *, const char *); 473 void 474 comstatus(struct com_softc *sc, const char *str) 475 { 476 struct tty *tp = sc->sc_tty; 477 478 aprint_normal_dev(sc->sc_dev, 479 "%s %cclocal %cdcd %cts_carr_on %cdtr %ctx_stopped\n", 480 str, 481 ISSET(tp->t_cflag, CLOCAL) ? '+' : '-', 482 ISSET(sc->sc_msr, MSR_DCD) ? '+' : '-', 483 ISSET(tp->t_state, TS_CARR_ON) ? '+' : '-', 484 ISSET(sc->sc_mcr, MCR_DTR) ? '+' : '-', 485 sc->sc_tx_stopped ? '+' : '-'); 486 487 aprint_normal_dev(sc->sc_dev, 488 "%s %ccrtscts %ccts %cts_ttstop %crts rx_flags=0x%x\n", 489 str, 490 ISSET(tp->t_cflag, CRTSCTS) ? '+' : '-', 491 ISSET(sc->sc_msr, MSR_CTS) ? '+' : '-', 492 ISSET(tp->t_state, TS_TTSTOP) ? '+' : '-', 493 ISSET(sc->sc_mcr, MCR_RTS) ? '+' : '-', 494 sc->sc_rx_flags); 495 } 496 #endif 497 498 int 499 com_probe_subr(struct com_regs *regs) 500 { 501 502 /* force access to id reg */ 503 CSR_WRITE_1(regs, COM_REG_LCR, LCR_8BITS); 504 CSR_WRITE_1(regs, COM_REG_IIR, 0); 505 if ((CSR_READ_1(regs, COM_REG_LCR) != LCR_8BITS) || 506 (CSR_READ_1(regs, COM_REG_IIR) & 0x38)) 507 return (0); 508 509 return (1); 510 } 511 512 int 513 comprobe1(bus_space_tag_t iot, bus_space_handle_t ioh) 514 { 515 struct com_regs regs; 516 517 com_init_regs(®s, iot, ioh, 0/*XXX*/); 518 519 return com_probe_subr(®s); 520 } 521 522 /* 523 * No locking in this routine; it is only called during attach, 524 * or with the port already locked. 525 */ 526 static void 527 com_enable_debugport(struct com_softc *sc) 528 { 529 530 /* Turn on line break interrupt, set carrier. */ 531 sc->sc_ier = IER_ERLS; 532 if (sc->sc_type == COM_TYPE_PXA2x0) 533 sc->sc_ier |= IER_EUART | IER_ERXTOUT; 534 if (sc->sc_type == COM_TYPE_INGENIC || 535 sc->sc_type == COM_TYPE_TEGRA) 536 sc->sc_ier |= IER_ERXTOUT; 537 CSR_WRITE_1(&sc->sc_regs, COM_REG_IER, sc->sc_ier); 538 SET(sc->sc_mcr, MCR_DTR | MCR_RTS); 539 CSR_WRITE_1(&sc->sc_regs, COM_REG_MCR, sc->sc_mcr); 540 } 541 542 static void 543 com_intr_poll(void *arg) 544 { 545 struct com_softc * const sc = arg; 546 547 comintr(sc); 548 549 callout_schedule(&sc->sc_poll_callout, sc->sc_poll_ticks); 550 } 551 552 void 553 com_attach_subr(struct com_softc *sc) 554 { 555 struct com_regs *regsp = &sc->sc_regs; 556 struct tty *tp; 557 uint32_t cpr; 558 uint8_t lcr; 559 const char *fifo_msg = NULL; 560 prop_dictionary_t dict; 561 bool is_console = true; 562 bool force_console = false; 563 bool skip_attach_delay = false; 564 int error; 565 aprint_naive("\n"); 566 567 dict = device_properties(sc->sc_dev); 568 prop_dictionary_get_bool(dict, "is_console", &is_console); 569 prop_dictionary_get_bool(dict, "force_console", &force_console); 570 prop_dictionary_get_bool(dict, "skip_attach_delay", &skip_attach_delay); 571 callout_init(&sc->sc_diag_callout, 0); 572 573 /* The softirq case must run everything here at IPL_SOFTfoo and 574 * not have any spin locks involved 575 */ 576 if (ISSET(sc->sc_hwflags, COM_HW_SOFTIRQ)) { 577 mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_SOFTSERIAL); 578 } else { 579 callout_init(&sc->sc_poll_callout, 0); 580 mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_HIGH); 581 callout_setfunc(&sc->sc_poll_callout, com_intr_poll, sc); 582 } 583 584 #if defined(COM_16650) 585 sc->sc_type = COM_TYPE_16650; 586 #elif defined(COM_16750) 587 sc->sc_type = COM_TYPE_16750; 588 #elif defined(COM_HAYESP) 589 sc->sc_type = COM_TYPE_HAYESP; 590 #elif defined(COM_PXA2X0) 591 sc->sc_type = COM_TYPE_PXA2x0; 592 #endif 593 594 /* Disable interrupts before configuring the device. */ 595 if (sc->sc_type == COM_TYPE_PXA2x0) 596 sc->sc_ier = IER_EUART; 597 else 598 sc->sc_ier = 0; 599 600 CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier); 601 602 if ((bus_space_is_equal(regsp->cr_iot, comcons_info.regs.cr_iot) && 603 regsp->cr_iobase == comcons_info.regs.cr_iobase) || force_console) { 604 comconsattached = 1; 605 606 if (force_console) 607 memcpy(regsp, &comcons_info.regs, sizeof(*regsp)); 608 609 if (cn_tab == NULL && comcnreattach() != 0) { 610 printf("can't re-init serial console @%lx\n", 611 (u_long)comcons_info.regs.cr_iobase); 612 } 613 614 switch (sc->sc_type) { 615 case COM_TYPE_16750: 616 case COM_TYPE_DW_APB: 617 /* Use in comintr(). */ 618 sc->sc_lcr = cflag2lcr(comcons_info.cflag); 619 break; 620 } 621 622 /* No need for a delay on virtual machines. */ 623 if (!skip_attach_delay) 624 delay(10000); /* wait for output to finish */ 625 626 /* Make sure the console is always "hardwired". */ 627 if (is_console) { 628 SET(sc->sc_hwflags, COM_HW_CONSOLE); 629 } 630 631 SET(sc->sc_swflags, TIOCFLAG_SOFTCAR); 632 } 633 634 /* Probe for FIFO */ 635 switch (sc->sc_type) { 636 case COM_TYPE_HAYESP: 637 goto fifodone; 638 639 case COM_TYPE_AU1x00: 640 sc->sc_fifolen = 16; 641 fifo_msg = "Au1X00 UART"; 642 SET(sc->sc_hwflags, COM_HW_FIFO); 643 goto fifodelay; 644 645 case COM_TYPE_16550_NOERS: 646 sc->sc_fifolen = 16; 647 fifo_msg = "ns16650, no ERS"; 648 SET(sc->sc_hwflags, COM_HW_FIFO); 649 goto fifodelay; 650 651 case COM_TYPE_OMAP: 652 sc->sc_fifolen = 64; 653 fifo_msg = "OMAP UART"; 654 SET(sc->sc_hwflags, COM_HW_FIFO); 655 goto fifodelay; 656 657 case COM_TYPE_INGENIC: 658 sc->sc_fifolen = 16; 659 fifo_msg = "Ingenic UART"; 660 SET(sc->sc_hwflags, COM_HW_FIFO); 661 SET(sc->sc_hwflags, COM_HW_NOIEN); 662 goto fifodelay; 663 664 case COM_TYPE_TEGRA: 665 sc->sc_fifolen = 8; 666 fifo_msg = "Tegra UART"; 667 SET(sc->sc_hwflags, COM_HW_FIFO); 668 CSR_WRITE_1(regsp, COM_REG_FIFO, 669 FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_1); 670 goto fifodelay; 671 672 case COM_TYPE_BCMAUXUART: 673 sc->sc_fifolen = 1; 674 fifo_msg = "BCM AUX UART"; 675 SET(sc->sc_hwflags, COM_HW_FIFO); 676 CSR_WRITE_1(regsp, COM_REG_FIFO, 677 FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_1); 678 goto fifodelay; 679 680 case COM_TYPE_DW_APB: 681 if (!prop_dictionary_get_uint(dict, "fifolen", &sc->sc_fifolen)) { 682 cpr = bus_space_read_4(sc->sc_regs.cr_iot, 683 sc->sc_regs.cr_ioh, DW_APB_UART_CPR); 684 sc->sc_fifolen = __SHIFTOUT(cpr, UART_CPR_FIFO_MODE) * 16; 685 } 686 if (sc->sc_fifolen == 0) { 687 sc->sc_fifolen = 1; 688 fifo_msg = "DesignWare APB UART, no fifo"; 689 CSR_WRITE_1(regsp, COM_REG_FIFO, 0); 690 } else { 691 fifo_msg = "DesignWare APB UART"; 692 SET(sc->sc_hwflags, COM_HW_FIFO); 693 CSR_WRITE_1(regsp, COM_REG_FIFO, 694 FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_1); 695 } 696 goto fifodelay; 697 698 case COM_TYPE_SC16IS7XX: 699 sc->sc_fifolen = 64; 700 fifo_msg = "NXP UART"; 701 SET(sc->sc_hwflags, COM_HW_FLOW); 702 SET(sc->sc_hwflags, COM_HW_FIFO); 703 SET(sc->sc_hwflags, COM_HW_MCRPRESCALE); 704 CSR_WRITE_1(regsp, COM_REG_FIFO, 705 FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_14); 706 goto fifodelay; 707 } 708 709 sc->sc_fifolen = 1; 710 /* look for a NS 16550AF UART with FIFOs */ 711 if (sc->sc_type == COM_TYPE_INGENIC) { 712 CSR_WRITE_1(regsp, COM_REG_FIFO, 713 FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | 714 FIFO_TRIGGER_14 | FIFO_UART_ON); 715 } else 716 CSR_WRITE_1(regsp, COM_REG_FIFO, 717 FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_14); 718 delay(100); 719 if (ISSET(CSR_READ_1(regsp, COM_REG_IIR), IIR_FIFO_MASK) 720 == IIR_FIFO_MASK) 721 if (ISSET(CSR_READ_1(regsp, COM_REG_FIFO), FIFO_TRIGGER_14) 722 == FIFO_TRIGGER_14) { 723 SET(sc->sc_hwflags, COM_HW_FIFO); 724 725 fifo_msg = "ns16550a"; 726 sc->sc_fifolen = 16; 727 728 /* 729 * IIR changes into the EFR if LCR is set to LCR_EERS 730 * on 16650s. We also know IIR != 0 at this point. 731 * Write 0 into the EFR, and read it. If the result 732 * is 0, we have a 16650. 733 * 734 * Older 16650s were broken; the test to detect them 735 * is taken from the Linux driver. Apparently 736 * setting DLAB enable gives access to the EFR on 737 * these chips. 738 */ 739 if (sc->sc_type == COM_TYPE_16650) { 740 lcr = CSR_READ_1(regsp, COM_REG_LCR); 741 CSR_WRITE_1(regsp, COM_REG_LCR, LCR_EERS); 742 CSR_WRITE_1(regsp, COM_REG_EFR, 0); 743 if (CSR_READ_1(regsp, COM_REG_EFR) == 0) { 744 CSR_WRITE_1(regsp, COM_REG_LCR, 745 lcr | LCR_DLAB); 746 if (CSR_READ_1(regsp, COM_REG_EFR) == 0) { 747 CLR(sc->sc_hwflags, COM_HW_FIFO); 748 sc->sc_fifolen = 0; 749 } else { 750 SET(sc->sc_hwflags, COM_HW_FLOW); 751 sc->sc_fifolen = 32; 752 } 753 } else 754 sc->sc_fifolen = 16; 755 756 CSR_WRITE_1(regsp, COM_REG_LCR, lcr); 757 if (sc->sc_fifolen == 0) 758 fifo_msg = "st16650, broken fifo"; 759 else if (sc->sc_fifolen == 32) 760 fifo_msg = "st16650a"; 761 else 762 fifo_msg = "ns16550a"; 763 } 764 765 /* 766 * TL16C750 can enable 64byte FIFO, only when DLAB 767 * is 1. However, some 16750 may always enable. For 768 * example, restrictions according to DLAB in a data 769 * sheet for SC16C750 were not described. 770 * Please enable 'options COM_16650', supposing you 771 * use SC16C750. Probably 32 bytes of FIFO and HW FLOW 772 * should become effective. 773 */ 774 if (sc->sc_type == COM_TYPE_16750) { 775 uint8_t iir1, iir2; 776 uint8_t fcr = FIFO_ENABLE | FIFO_TRIGGER_14; 777 778 lcr = CSR_READ_1(regsp, COM_REG_LCR); 779 CSR_WRITE_1(regsp, COM_REG_LCR, 780 lcr & ~LCR_DLAB); 781 CSR_WRITE_1(regsp, COM_REG_FIFO, 782 fcr | FIFO_64B_ENABLE); 783 iir1 = CSR_READ_1(regsp, COM_REG_IIR); 784 CSR_WRITE_1(regsp, COM_REG_FIFO, fcr); 785 CSR_WRITE_1(regsp, COM_REG_LCR, lcr | LCR_DLAB); 786 CSR_WRITE_1(regsp, COM_REG_FIFO, 787 fcr | FIFO_64B_ENABLE); 788 iir2 = CSR_READ_1(regsp, COM_REG_IIR); 789 790 CSR_WRITE_1(regsp, COM_REG_LCR, lcr); 791 792 if (!ISSET(iir1, IIR_64B_FIFO) && 793 ISSET(iir2, IIR_64B_FIFO)) { 794 /* It is TL16C750. */ 795 sc->sc_fifolen = 64; 796 SET(sc->sc_hwflags, COM_HW_AFE); 797 } else 798 CSR_WRITE_1(regsp, COM_REG_FIFO, fcr); 799 800 if (sc->sc_fifolen == 64) 801 fifo_msg = "tl16c750"; 802 else 803 fifo_msg = "ns16750"; 804 } 805 } else 806 fifo_msg = "ns16550, broken fifo"; 807 else 808 fifo_msg = "ns8250 or ns16450, no fifo"; 809 CSR_WRITE_1(regsp, COM_REG_FIFO, 0); 810 811 fifodelay: 812 /* 813 * Some chips will clear down both Tx and Rx FIFOs when zero is 814 * written to com_fifo. If this chip is the console, writing zero 815 * results in some of the chip/FIFO description being lost, so delay 816 * printing it until now. 817 */ 818 delay(10); 819 if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) { 820 aprint_normal(": %s, %d-byte FIFO\n", fifo_msg, sc->sc_fifolen); 821 } else { 822 aprint_normal(": %s\n", fifo_msg); 823 } 824 if (ISSET(sc->sc_hwflags, COM_HW_TXFIFO_DISABLE)) { 825 sc->sc_fifolen = 1; 826 aprint_normal_dev(sc->sc_dev, "txfifo disabled\n"); 827 } 828 829 fifodone: 830 831 tp = tty_alloc(); 832 if (ISSET(sc->sc_hwflags, COM_HW_SOFTIRQ)) { 833 tp->t_oproc = comstartsoft; 834 tp->t_hwiflow = comhwiflowsoft; 835 } else { 836 tp->t_oproc = comstart; 837 tp->t_hwiflow = comhwiflow; 838 } 839 tp->t_param = comparam; 840 tp->t_softc = sc; 841 842 sc->sc_tty = tp; 843 sc->sc_rbuf = malloc(com_rbuf_size << 1, M_DEVBUF, M_WAITOK); 844 sc->sc_rbput = sc->sc_rbget = sc->sc_rbuf; 845 sc->sc_rbavail = com_rbuf_size; 846 sc->sc_ebuf = sc->sc_rbuf + (com_rbuf_size << 1); 847 848 tty_attach(tp); 849 850 if (!ISSET(sc->sc_hwflags, COM_HW_NOIEN)) 851 SET(sc->sc_mcr, MCR_IENABLE); 852 853 if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 854 int maj; 855 856 /* locate the major number */ 857 maj = cdevsw_lookup_major(&com_cdevsw); 858 859 tp->t_dev = cn_tab->cn_dev = makedev(maj, 860 device_unit(sc->sc_dev)); 861 862 aprint_normal_dev(sc->sc_dev, "console\n"); 863 } 864 865 #ifdef KGDB 866 /* 867 * Allow kgdb to "take over" this port. If this is 868 * not the console and is the kgdb device, it has 869 * exclusive use. If it's the console _and_ the 870 * kgdb device, it doesn't. 871 */ 872 if (bus_space_is_equal(regsp->cr_iot, comkgdbregs.cr_iot) && 873 regsp->cr_iobase == comkgdbregs.cr_iobase) { 874 if (!ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 875 com_kgdb_attached = 1; 876 877 SET(sc->sc_hwflags, COM_HW_KGDB); 878 } 879 aprint_normal_dev(sc->sc_dev, "kgdb\n"); 880 } 881 #endif 882 883 /* Use a workqueue in the softirq case and not a softint, which 884 * tripped panics 885 */ 886 if (ISSET(sc->sc_hwflags, COM_HW_SOFTIRQ)) { 887 error = workqueue_create(&sc->sc_wq, device_xname(sc->sc_dev), 888 comsoftwq, sc, PRI_SOFTSERIAL, IPL_SOFTSERIAL, WQ_MPSAFE); 889 if (error) { 890 aprint_error_dev(sc->sc_dev, 891 "Could not create workqueue: %d\n", 892 error); 893 } 894 sc->sc_si = NULL; 895 } else { 896 sc->sc_si = softint_establish(SOFTINT_SERIAL, comsoft, sc); 897 sc->sc_wq = NULL; 898 } 899 900 #ifdef RND_COM 901 rnd_attach_source(&sc->rnd_source, device_xname(sc->sc_dev), 902 RND_TYPE_TTY, RND_FLAG_DEFAULT); 903 #endif 904 905 /* if there are no enable/disable functions, assume the device 906 is always enabled */ 907 if (!sc->enable) 908 sc->enabled = 1; 909 910 com_config(sc); 911 912 SET(sc->sc_hwflags, COM_HW_DEV_OK); 913 914 /* A choice was made here... in the softirq case, have the code that 915 * this is glued to start the interrupt poller. The SC16IS7XX needs this 916 * because there are two ports on one chip with a single interrupt and you 917 * wouldn't want two kernel threads running to do that artifical interrupt. 918 */ 919 if (sc->sc_poll_ticks != 0) { 920 if (!ISSET(sc->sc_hwflags, COM_HW_SOFTIRQ)) { 921 callout_schedule(&sc->sc_poll_callout, sc->sc_poll_ticks); 922 } 923 } 924 } 925 926 void 927 com_config(struct com_softc *sc) 928 { 929 struct com_regs *regsp = &sc->sc_regs; 930 931 /* Disable interrupts before configuring the device. */ 932 if (sc->sc_type == COM_TYPE_PXA2x0) 933 sc->sc_ier = IER_EUART; 934 else 935 sc->sc_ier = 0; 936 CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier); 937 (void) CSR_READ_1(regsp, COM_REG_IIR); 938 939 /* Look for a Hayes ESP board. */ 940 if (sc->sc_type == COM_TYPE_HAYESP) { 941 942 /* Set 16550 compatibility mode */ 943 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD1, 944 HAYESP_SETMODE); 945 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2, 946 HAYESP_MODE_FIFO|HAYESP_MODE_RTS| 947 HAYESP_MODE_SCALE); 948 949 /* Set RTS/CTS flow control */ 950 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD1, 951 HAYESP_SETFLOWTYPE); 952 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2, 953 HAYESP_FLOW_RTS); 954 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2, 955 HAYESP_FLOW_CTS); 956 957 /* Set flow control levels */ 958 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD1, 959 HAYESP_SETRXFLOW); 960 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2, 961 HAYESP_HIBYTE(HAYESP_RXHIWMARK)); 962 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2, 963 HAYESP_LOBYTE(HAYESP_RXHIWMARK)); 964 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2, 965 HAYESP_HIBYTE(HAYESP_RXLOWMARK)); 966 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2, 967 HAYESP_LOBYTE(HAYESP_RXLOWMARK)); 968 } 969 970 if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE|COM_HW_KGDB)) 971 com_enable_debugport(sc); 972 } 973 974 int 975 com_detach(device_t self, int flags) 976 { 977 struct com_softc *sc = device_private(self); 978 int maj, mn; 979 980 if (ISSET(sc->sc_hwflags, COM_HW_KGDB)) 981 return EBUSY; 982 983 if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE) && 984 (flags & DETACH_SHUTDOWN) != 0) 985 return EBUSY; 986 987 if (sc->disable != NULL && sc->enabled != 0) { 988 (*sc->disable)(sc); 989 sc->enabled = 0; 990 } 991 992 if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 993 comconsattached = 0; 994 cn_tab = NULL; 995 } 996 997 /* locate the major number */ 998 maj = cdevsw_lookup_major(&com_cdevsw); 999 1000 /* Nuke the vnodes for any open instances. */ 1001 mn = device_unit(self); 1002 vdevgone(maj, mn, mn, VCHR); 1003 1004 mn |= COMDIALOUT_MASK; 1005 vdevgone(maj, mn, mn, VCHR); 1006 1007 if (sc->sc_rbuf == NULL) { 1008 /* 1009 * Ring buffer allocation failed in the com_attach_subr, 1010 * only the tty is allocated, and nothing else. 1011 */ 1012 tty_free(sc->sc_tty); 1013 return 0; 1014 } 1015 1016 /* Free the receive buffer. */ 1017 free(sc->sc_rbuf, M_DEVBUF); 1018 1019 /* Detach and free the tty. */ 1020 tty_detach(sc->sc_tty); 1021 tty_free(sc->sc_tty); 1022 1023 /* Unhook the soft interrupt handler. */ 1024 if (sc->sc_si != NULL) 1025 softint_disestablish(sc->sc_si); 1026 1027 if (sc->sc_wq != NULL) 1028 workqueue_destroy(sc->sc_wq); 1029 1030 #ifdef RND_COM 1031 /* Unhook the entropy source. */ 1032 rnd_detach_source(&sc->rnd_source); 1033 #endif 1034 callout_destroy(&sc->sc_diag_callout); 1035 if (!ISSET(sc->sc_hwflags, COM_HW_SOFTIRQ)) 1036 callout_destroy(&sc->sc_poll_callout); 1037 1038 com_mutex_enter(sc); 1039 com_mutex_exit(sc); 1040 1041 /* Destroy the lock. */ 1042 mutex_destroy(&sc->sc_lock); 1043 1044 return (0); 1045 } 1046 1047 void 1048 com_shutdown(struct com_softc *sc) 1049 { 1050 struct tty *tp = sc->sc_tty; 1051 1052 com_mutex_enter(sc); 1053 1054 /* If we were asserting flow control, then deassert it. */ 1055 SET(sc->sc_rx_flags, RX_IBUF_BLOCKED); 1056 com_hwiflow(sc); 1057 1058 /* Clear any break condition set with TIOCSBRK. */ 1059 com_break(sc, 0); 1060 1061 /* 1062 * Hang up if necessary. Record when we hung up, so if we 1063 * immediately open the port again, we will wait a bit until 1064 * the other side has had time to notice that we hung up. 1065 */ 1066 if (ISSET(tp->t_cflag, HUPCL)) { 1067 com_modem(sc, 0); 1068 microuptime(&sc->sc_hup_pending); 1069 sc->sc_hup_pending.tv_sec++; 1070 } 1071 1072 /* Turn off interrupts. */ 1073 if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 1074 sc->sc_ier = IER_ERLS; /* interrupt on line break */ 1075 if ((sc->sc_type == COM_TYPE_PXA2x0) || 1076 (sc->sc_type == COM_TYPE_INGENIC) || 1077 (sc->sc_type == COM_TYPE_TEGRA)) 1078 sc->sc_ier |= IER_ERXTOUT; 1079 } else 1080 sc->sc_ier = 0; 1081 1082 if (sc->sc_type == COM_TYPE_PXA2x0) 1083 sc->sc_ier |= IER_EUART; 1084 1085 CSR_WRITE_1(&sc->sc_regs, COM_REG_IER, sc->sc_ier); 1086 1087 com_mutex_exit(sc); 1088 1089 if (sc->disable) { 1090 #ifdef DIAGNOSTIC 1091 if (!sc->enabled) 1092 panic("com_shutdown: not enabled?"); 1093 #endif 1094 (*sc->disable)(sc); 1095 sc->enabled = 0; 1096 } 1097 } 1098 1099 int 1100 comopen(dev_t dev, int flag, int mode, struct lwp *l) 1101 { 1102 struct com_softc *sc; 1103 struct tty *tp; 1104 int s; 1105 int error; 1106 1107 sc = device_lookup_private(&com_cd, COMUNIT(dev)); 1108 1109 if (sc == NULL || !ISSET(sc->sc_hwflags, COM_HW_DEV_OK) || 1110 sc->sc_rbuf == NULL) 1111 return (ENXIO); 1112 1113 if (!device_is_active(sc->sc_dev)) 1114 return (ENXIO); 1115 1116 #ifdef KGDB 1117 /* 1118 * If this is the kgdb port, no other use is permitted. 1119 */ 1120 if (ISSET(sc->sc_hwflags, COM_HW_KGDB)) 1121 return (EBUSY); 1122 #endif 1123 1124 tp = sc->sc_tty; 1125 1126 /* 1127 * If the device is exclusively for kernel use, deny userland 1128 * open. 1129 */ 1130 if (ISSET(tp->t_state, TS_KERN_ONLY)) 1131 return (EBUSY); 1132 1133 if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp)) 1134 return (EBUSY); 1135 1136 /* Run at the IPL_SOFTfoo level */ 1137 if (ISSET(sc->sc_hwflags, COM_HW_SOFTIRQ)) 1138 s = splsoftserial(); 1139 else 1140 s = spltty(); 1141 1142 /* 1143 * Do the following iff this is a first open. 1144 */ 1145 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 1146 struct termios t; 1147 struct timeval now, diff; 1148 1149 tp->t_dev = dev; 1150 1151 if (sc->enable) { 1152 if ((*sc->enable)(sc)) { 1153 splx(s); 1154 aprint_error_dev(sc->sc_dev, 1155 "device enable failed\n"); 1156 return (EIO); 1157 } 1158 com_mutex_enter(sc); 1159 sc->enabled = 1; 1160 com_config(sc); 1161 } else { 1162 com_mutex_enter(sc); 1163 } 1164 1165 if (timerisset(&sc->sc_hup_pending)) { 1166 microuptime(&now); 1167 while (timercmp(&now, &sc->sc_hup_pending, <)) { 1168 timersub(&sc->sc_hup_pending, &now, &diff); 1169 const int ms = diff.tv_sec * 1000 + 1170 diff.tv_usec / 1000; 1171 kpause(ttclos, false, uimax(mstohz(ms), 1), 1172 &sc->sc_lock); 1173 microuptime(&now); 1174 } 1175 timerclear(&sc->sc_hup_pending); 1176 } 1177 1178 /* Turn on interrupts. */ 1179 sc->sc_ier = IER_ERXRDY | IER_ERLS; 1180 if (!ISSET(tp->t_cflag, CLOCAL)) 1181 sc->sc_ier |= IER_EMSC; 1182 1183 if (sc->sc_type == COM_TYPE_PXA2x0) 1184 sc->sc_ier |= IER_EUART | IER_ERXTOUT; 1185 else if (sc->sc_type == COM_TYPE_INGENIC || 1186 sc->sc_type == COM_TYPE_TEGRA) 1187 sc->sc_ier |= IER_ERXTOUT; 1188 CSR_WRITE_1(&sc->sc_regs, COM_REG_IER, sc->sc_ier); 1189 1190 /* Fetch the current modem control status, needed later. */ 1191 sc->sc_msr = CSR_READ_1(&sc->sc_regs, COM_REG_MSR); 1192 1193 /* Clear PPS capture state on first open. */ 1194 mutex_spin_enter(&timecounter_lock); 1195 memset(&sc->sc_pps_state, 0, sizeof(sc->sc_pps_state)); 1196 sc->sc_pps_state.ppscap = PPS_CAPTUREASSERT | PPS_CAPTURECLEAR; 1197 pps_init(&sc->sc_pps_state); 1198 mutex_spin_exit(&timecounter_lock); 1199 1200 com_mutex_exit(sc); 1201 1202 /* 1203 * Initialize the termios status to the defaults. Add in the 1204 * sticky bits from TIOCSFLAGS. 1205 */ 1206 if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 1207 t.c_ospeed = comcons_info.rate; 1208 t.c_cflag = comcons_info.cflag; 1209 } else { 1210 t.c_ospeed = TTYDEF_SPEED; 1211 t.c_cflag = TTYDEF_CFLAG; 1212 } 1213 t.c_ispeed = t.c_ospeed; 1214 if (ISSET(sc->sc_swflags, TIOCFLAG_CLOCAL)) 1215 SET(t.c_cflag, CLOCAL); 1216 if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS)) 1217 SET(t.c_cflag, CRTSCTS); 1218 if (ISSET(sc->sc_swflags, TIOCFLAG_MDMBUF)) 1219 SET(t.c_cflag, MDMBUF); 1220 /* Make sure comparam() will do something. */ 1221 tp->t_ospeed = 0; 1222 (void) comparam(tp, &t); 1223 tp->t_iflag = TTYDEF_IFLAG; 1224 tp->t_oflag = TTYDEF_OFLAG; 1225 tp->t_lflag = TTYDEF_LFLAG; 1226 ttychars(tp); 1227 ttsetwater(tp); 1228 1229 com_mutex_enter(sc); 1230 1231 /* 1232 * Turn on DTR. We must always do this, even if carrier is not 1233 * present, because otherwise we'd have to use TIOCSDTR 1234 * immediately after setting CLOCAL, which applications do not 1235 * expect. We always assert DTR while the device is open 1236 * unless explicitly requested to deassert it. 1237 */ 1238 com_modem(sc, 1); 1239 1240 /* Clear the input ring, and unblock. */ 1241 sc->sc_rbput = sc->sc_rbget = sc->sc_rbuf; 1242 sc->sc_rbavail = com_rbuf_size; 1243 com_iflush(sc); 1244 CLR(sc->sc_rx_flags, RX_ANY_BLOCK); 1245 com_hwiflow(sc); 1246 1247 #ifdef COM_DEBUG 1248 if (com_debug) 1249 comstatus(sc, "comopen "); 1250 #endif 1251 1252 com_mutex_exit(sc); 1253 } 1254 1255 splx(s); 1256 1257 error = ttyopen(tp, COMDIALOUT(dev), ISSET(flag, O_NONBLOCK)); 1258 if (error) 1259 goto bad; 1260 1261 error = (*tp->t_linesw->l_open)(dev, tp); 1262 if (error) 1263 goto bad; 1264 1265 return (0); 1266 1267 bad: 1268 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 1269 /* 1270 * We failed to open the device, and nobody else had it opened. 1271 * Clean up the state as appropriate. 1272 */ 1273 com_shutdown(sc); 1274 } 1275 1276 return (error); 1277 } 1278 1279 int 1280 comclose(dev_t dev, int flag, int mode, struct lwp *l) 1281 { 1282 struct com_softc *sc = 1283 device_lookup_private(&com_cd, COMUNIT(dev)); 1284 struct tty *tp = sc->sc_tty; 1285 1286 /* XXX This is for cons.c. */ 1287 if (!ISSET(tp->t_state, TS_ISOPEN)) 1288 return (0); 1289 /* 1290 * If the device is exclusively for kernel use, deny userland 1291 * close. 1292 */ 1293 if (ISSET(tp->t_state, TS_KERN_ONLY)) 1294 return (0); 1295 1296 (*tp->t_linesw->l_close)(tp, flag); 1297 ttyclose(tp); 1298 1299 if (COM_ISALIVE(sc) == 0) 1300 return (0); 1301 1302 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 1303 /* 1304 * Although we got a last close, the device may still be in 1305 * use; e.g. if this was the dialout node, and there are still 1306 * processes waiting for carrier on the non-dialout node. 1307 */ 1308 com_shutdown(sc); 1309 } 1310 1311 return (0); 1312 } 1313 1314 int 1315 comread(dev_t dev, struct uio *uio, int flag) 1316 { 1317 struct com_softc *sc = 1318 device_lookup_private(&com_cd, COMUNIT(dev)); 1319 struct tty *tp = sc->sc_tty; 1320 1321 if (COM_ISALIVE(sc) == 0) 1322 return (EIO); 1323 1324 return ((*tp->t_linesw->l_read)(tp, uio, flag)); 1325 } 1326 1327 int 1328 comwrite(dev_t dev, struct uio *uio, int flag) 1329 { 1330 struct com_softc *sc = 1331 device_lookup_private(&com_cd, COMUNIT(dev)); 1332 struct tty *tp = sc->sc_tty; 1333 1334 if (COM_ISALIVE(sc) == 0) 1335 return (EIO); 1336 1337 return ((*tp->t_linesw->l_write)(tp, uio, flag)); 1338 } 1339 1340 int 1341 compoll(dev_t dev, int events, struct lwp *l) 1342 { 1343 struct com_softc *sc = 1344 device_lookup_private(&com_cd, COMUNIT(dev)); 1345 struct tty *tp = sc->sc_tty; 1346 1347 if (COM_ISALIVE(sc) == 0) 1348 return (POLLHUP); 1349 1350 return ((*tp->t_linesw->l_poll)(tp, events, l)); 1351 } 1352 1353 struct tty * 1354 comtty(dev_t dev) 1355 { 1356 struct com_softc *sc = 1357 device_lookup_private(&com_cd, COMUNIT(dev)); 1358 struct tty *tp = sc->sc_tty; 1359 1360 return (tp); 1361 } 1362 1363 int 1364 comioctl(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l) 1365 { 1366 struct com_softc *sc; 1367 struct tty *tp; 1368 int error; 1369 1370 sc = device_lookup_private(&com_cd, COMUNIT(dev)); 1371 if (sc == NULL) 1372 return ENXIO; 1373 if (COM_ISALIVE(sc) == 0) 1374 return (EIO); 1375 1376 tp = sc->sc_tty; 1377 1378 error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, l); 1379 if (error != EPASSTHROUGH) 1380 return (error); 1381 1382 error = ttioctl(tp, cmd, data, flag, l); 1383 if (error != EPASSTHROUGH) 1384 return (error); 1385 1386 error = 0; 1387 switch (cmd) { 1388 case TIOCSFLAGS: 1389 error = kauth_authorize_device_tty(l->l_cred, 1390 KAUTH_DEVICE_TTY_PRIVSET, tp); 1391 break; 1392 default: 1393 /* nothing */ 1394 break; 1395 } 1396 if (error) { 1397 return error; 1398 } 1399 1400 com_mutex_enter(sc); 1401 1402 switch (cmd) { 1403 case TIOCSBRK: 1404 com_break(sc, 1); 1405 break; 1406 1407 case TIOCCBRK: 1408 com_break(sc, 0); 1409 break; 1410 1411 case TIOCSDTR: 1412 com_modem(sc, 1); 1413 break; 1414 1415 case TIOCCDTR: 1416 com_modem(sc, 0); 1417 break; 1418 1419 case TIOCGFLAGS: 1420 *(int *)data = sc->sc_swflags; 1421 break; 1422 1423 case TIOCSFLAGS: 1424 sc->sc_swflags = *(int *)data; 1425 break; 1426 1427 case TIOCMSET: 1428 case TIOCMBIS: 1429 case TIOCMBIC: 1430 tiocm_to_com(sc, cmd, *(int *)data); 1431 break; 1432 1433 case TIOCMGET: 1434 *(int *)data = com_to_tiocm(sc); 1435 break; 1436 1437 case PPS_IOC_CREATE: 1438 case PPS_IOC_DESTROY: 1439 case PPS_IOC_GETPARAMS: 1440 case PPS_IOC_SETPARAMS: 1441 case PPS_IOC_GETCAP: 1442 case PPS_IOC_FETCH: 1443 #ifdef PPS_SYNC 1444 case PPS_IOC_KCBIND: 1445 #endif 1446 mutex_spin_enter(&timecounter_lock); 1447 error = pps_ioctl(cmd, data, &sc->sc_pps_state); 1448 mutex_spin_exit(&timecounter_lock); 1449 break; 1450 1451 case TIOCDCDTIMESTAMP: /* XXX old, overloaded API used by xntpd v3 */ 1452 mutex_spin_enter(&timecounter_lock); 1453 #ifndef PPS_TRAILING_EDGE 1454 TIMESPEC_TO_TIMEVAL((struct timeval *)data, 1455 &sc->sc_pps_state.ppsinfo.assert_timestamp); 1456 #else 1457 TIMESPEC_TO_TIMEVAL((struct timeval *)data, 1458 &sc->sc_pps_state.ppsinfo.clear_timestamp); 1459 #endif 1460 mutex_spin_exit(&timecounter_lock); 1461 break; 1462 1463 default: 1464 error = EPASSTHROUGH; 1465 break; 1466 } 1467 1468 com_mutex_exit(sc); 1469 1470 #ifdef COM_DEBUG 1471 if (com_debug) 1472 comstatus(sc, "comioctl "); 1473 #endif 1474 1475 return (error); 1476 } 1477 1478 static inline void 1479 com_schedrx(struct com_softc *sc) 1480 { 1481 sc->sc_rx_ready = 1; 1482 1483 /* Wake up the poller. */ 1484 if (ISSET(sc->sc_hwflags, COM_HW_SOFTIRQ)) 1485 workqueue_enqueue(sc->sc_wq,(struct work *)&sc->sc_wk,NULL); 1486 else 1487 softint_schedule(sc->sc_si); 1488 } 1489 1490 void 1491 com_break(struct com_softc *sc, int onoff) 1492 { 1493 1494 if (onoff) 1495 SET(sc->sc_lcr, LCR_SBREAK); 1496 else 1497 CLR(sc->sc_lcr, LCR_SBREAK); 1498 1499 if (!sc->sc_heldchange) { 1500 if (sc->sc_tx_busy) { 1501 sc->sc_heldtbc = sc->sc_tbc; 1502 sc->sc_tbc = 0; 1503 sc->sc_heldchange = 1; 1504 } else 1505 com_loadchannelregs(sc); 1506 } 1507 } 1508 1509 void 1510 com_modem(struct com_softc *sc, int onoff) 1511 { 1512 1513 if (sc->sc_mcr_dtr == 0) 1514 return; 1515 1516 if (onoff) 1517 SET(sc->sc_mcr, sc->sc_mcr_dtr); 1518 else 1519 CLR(sc->sc_mcr, sc->sc_mcr_dtr); 1520 1521 if (!sc->sc_heldchange) { 1522 if (sc->sc_tx_busy) { 1523 sc->sc_heldtbc = sc->sc_tbc; 1524 sc->sc_tbc = 0; 1525 sc->sc_heldchange = 1; 1526 } else 1527 com_loadchannelregs(sc); 1528 } 1529 } 1530 1531 void 1532 tiocm_to_com(struct com_softc *sc, u_long how, int ttybits) 1533 { 1534 u_char combits; 1535 1536 combits = 0; 1537 if (ISSET(ttybits, TIOCM_DTR)) 1538 SET(combits, MCR_DTR); 1539 if (ISSET(ttybits, TIOCM_RTS)) 1540 SET(combits, MCR_RTS); 1541 1542 switch (how) { 1543 case TIOCMBIC: 1544 CLR(sc->sc_mcr, combits); 1545 break; 1546 1547 case TIOCMBIS: 1548 SET(sc->sc_mcr, combits); 1549 break; 1550 1551 case TIOCMSET: 1552 CLR(sc->sc_mcr, MCR_DTR | MCR_RTS); 1553 SET(sc->sc_mcr, combits); 1554 break; 1555 } 1556 1557 if (!sc->sc_heldchange) { 1558 if (sc->sc_tx_busy) { 1559 sc->sc_heldtbc = sc->sc_tbc; 1560 sc->sc_tbc = 0; 1561 sc->sc_heldchange = 1; 1562 } else 1563 com_loadchannelregs(sc); 1564 } 1565 } 1566 1567 int 1568 com_to_tiocm(struct com_softc *sc) 1569 { 1570 u_char combits; 1571 int ttybits = 0; 1572 1573 combits = sc->sc_mcr; 1574 if (ISSET(combits, MCR_DTR)) 1575 SET(ttybits, TIOCM_DTR); 1576 if (ISSET(combits, MCR_RTS)) 1577 SET(ttybits, TIOCM_RTS); 1578 1579 combits = sc->sc_msr; 1580 if (sc->sc_type == COM_TYPE_INGENIC) { 1581 SET(ttybits, TIOCM_CD); 1582 } else { 1583 if (ISSET(combits, MSR_DCD)) 1584 SET(ttybits, TIOCM_CD); 1585 } 1586 if (ISSET(combits, MSR_CTS)) 1587 SET(ttybits, TIOCM_CTS); 1588 if (ISSET(combits, MSR_DSR)) 1589 SET(ttybits, TIOCM_DSR); 1590 if (ISSET(combits, MSR_RI | MSR_TERI)) 1591 SET(ttybits, TIOCM_RI); 1592 1593 if (ISSET(sc->sc_ier, IER_ERXRDY | IER_ETXRDY | IER_ERLS | IER_EMSC)) 1594 SET(ttybits, TIOCM_LE); 1595 1596 return (ttybits); 1597 } 1598 1599 static u_char 1600 cflag2lcr(tcflag_t cflag) 1601 { 1602 u_char lcr = 0; 1603 1604 switch (ISSET(cflag, CSIZE)) { 1605 case CS5: 1606 SET(lcr, LCR_5BITS); 1607 break; 1608 case CS6: 1609 SET(lcr, LCR_6BITS); 1610 break; 1611 case CS7: 1612 SET(lcr, LCR_7BITS); 1613 break; 1614 case CS8: 1615 SET(lcr, LCR_8BITS); 1616 break; 1617 } 1618 if (ISSET(cflag, PARENB)) { 1619 SET(lcr, LCR_PENAB); 1620 if (!ISSET(cflag, PARODD)) 1621 SET(lcr, LCR_PEVEN); 1622 } 1623 if (ISSET(cflag, CSTOPB)) 1624 SET(lcr, LCR_STOPB); 1625 1626 return (lcr); 1627 } 1628 1629 int 1630 comparam(struct tty *tp, struct termios *t) 1631 { 1632 struct com_softc *sc = 1633 device_lookup_private(&com_cd, COMUNIT(tp->t_dev)); 1634 int ospeed; 1635 u_char lcr; 1636 1637 if (COM_ISALIVE(sc) == 0) 1638 return (EIO); 1639 1640 if (sc->sc_type == COM_TYPE_HAYESP) { 1641 int prescaler, speed; 1642 1643 /* 1644 * Calculate UART clock prescaler. It should be in 1645 * range of 0 .. 3. 1646 */ 1647 for (prescaler = 0, speed = t->c_ospeed; prescaler < 4; 1648 prescaler++, speed /= 2) 1649 if ((ospeed = comspeed(speed, sc->sc_frequency, 1650 sc->sc_type)) > 0) 1651 break; 1652 1653 if (prescaler == 4) 1654 return (EINVAL); 1655 sc->sc_prescaler = prescaler; 1656 } else { 1657 if (ISSET(sc->sc_hwflags, COM_HW_MCRPRESCALE)) { 1658 /* Try it without the prescaler, if that fails, enable 1659 * the prescaler and try again. 1660 */ 1661 ospeed = comspeed(t->c_ospeed, sc->sc_frequency, sc->sc_type); 1662 CLR(sc->sc_mcr, MCR_PRESCALE); 1663 if (ospeed < 0) { 1664 ospeed = comspeed(t->c_ospeed, sc->sc_frequency / 4, sc->sc_type); 1665 if (ospeed >= 0) 1666 SET(sc->sc_mcr, MCR_PRESCALE); 1667 } 1668 } else { 1669 ospeed = comspeed(t->c_ospeed, sc->sc_frequency, sc->sc_type); 1670 } 1671 } 1672 1673 /* Check requested parameters. */ 1674 if (ospeed < 0) 1675 return (EINVAL); 1676 if (t->c_ispeed && t->c_ispeed != t->c_ospeed) 1677 return (EINVAL); 1678 1679 /* 1680 * For the console, always force CLOCAL and !HUPCL, so that the port 1681 * is always active. 1682 */ 1683 if (ISSET(sc->sc_swflags, TIOCFLAG_SOFTCAR) || 1684 ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 1685 SET(t->c_cflag, CLOCAL); 1686 CLR(t->c_cflag, HUPCL); 1687 } 1688 1689 /* 1690 * If there were no changes, don't do anything. This avoids dropping 1691 * input and improves performance when all we did was frob things like 1692 * VMIN and VTIME. 1693 */ 1694 if (tp->t_ospeed == t->c_ospeed && 1695 tp->t_cflag == t->c_cflag) 1696 return (0); 1697 1698 lcr = ISSET(sc->sc_lcr, LCR_SBREAK) | cflag2lcr(t->c_cflag); 1699 1700 com_mutex_enter(sc); 1701 1702 sc->sc_lcr = lcr; 1703 1704 /* 1705 * If we're not in a mode that assumes a connection is present, then 1706 * ignore carrier changes. 1707 */ 1708 if (ISSET(t->c_cflag, CLOCAL | MDMBUF)) 1709 sc->sc_msr_dcd = 0; 1710 else 1711 sc->sc_msr_dcd = MSR_DCD; 1712 /* 1713 * Set the flow control pins depending on the current flow control 1714 * mode. 1715 */ 1716 if (ISSET(t->c_cflag, CRTSCTS)) { 1717 sc->sc_mcr_dtr = MCR_DTR; 1718 sc->sc_mcr_rts = MCR_RTS; 1719 sc->sc_msr_cts = MSR_CTS; 1720 if (ISSET(sc->sc_hwflags, COM_HW_AFE)) { 1721 SET(sc->sc_mcr, MCR_AFE); 1722 } else { 1723 sc->sc_efr = EFR_AUTORTS | EFR_AUTOCTS; 1724 } 1725 } else if (ISSET(t->c_cflag, MDMBUF)) { 1726 /* 1727 * For DTR/DCD flow control, make sure we don't toggle DTR for 1728 * carrier detection. 1729 */ 1730 sc->sc_mcr_dtr = 0; 1731 sc->sc_mcr_rts = MCR_DTR; 1732 sc->sc_msr_cts = MSR_DCD; 1733 if (ISSET(sc->sc_hwflags, COM_HW_AFE)) { 1734 CLR(sc->sc_mcr, MCR_AFE); 1735 } else { 1736 sc->sc_efr = 0; 1737 } 1738 } else { 1739 /* 1740 * If no flow control, then always set RTS. This will make 1741 * the other side happy if it mistakenly thinks we're doing 1742 * RTS/CTS flow control. 1743 */ 1744 sc->sc_mcr_dtr = MCR_DTR | MCR_RTS; 1745 sc->sc_mcr_rts = 0; 1746 sc->sc_msr_cts = 0; 1747 if (ISSET(sc->sc_hwflags, COM_HW_AFE)) { 1748 CLR(sc->sc_mcr, MCR_AFE); 1749 } else { 1750 sc->sc_efr = 0; 1751 } 1752 if (ISSET(sc->sc_mcr, MCR_DTR)) 1753 SET(sc->sc_mcr, MCR_RTS); 1754 else 1755 CLR(sc->sc_mcr, MCR_RTS); 1756 } 1757 sc->sc_msr_mask = sc->sc_msr_cts | sc->sc_msr_dcd; 1758 1759 if (t->c_ospeed == 0 && tp->t_ospeed != 0) 1760 CLR(sc->sc_mcr, sc->sc_mcr_dtr); 1761 else if (t->c_ospeed != 0 && tp->t_ospeed == 0) 1762 SET(sc->sc_mcr, sc->sc_mcr_dtr); 1763 1764 sc->sc_dlbl = ospeed; 1765 sc->sc_dlbh = ospeed >> 8; 1766 1767 /* 1768 * Set the FIFO threshold based on the receive speed. 1769 * 1770 * * If it's a low speed, it's probably a mouse or some other 1771 * interactive device, so set the threshold low. 1772 * * If it's a high speed, trim the trigger level down to prevent 1773 * overflows. 1774 * * Otherwise set it a bit higher. 1775 */ 1776 if (sc->sc_type == COM_TYPE_HAYESP) { 1777 sc->sc_fifo = FIFO_DMA_MODE | FIFO_ENABLE | FIFO_TRIGGER_8; 1778 } else if (sc->sc_type == COM_TYPE_TEGRA) { 1779 sc->sc_fifo = FIFO_ENABLE | FIFO_TRIGGER_1; 1780 } else if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) { 1781 if (t->c_ospeed <= 1200) 1782 sc->sc_fifo = FIFO_ENABLE | FIFO_TRIGGER_1; 1783 else if (t->c_ospeed <= 38400) 1784 sc->sc_fifo = FIFO_ENABLE | FIFO_TRIGGER_8; 1785 else 1786 sc->sc_fifo = FIFO_ENABLE | FIFO_TRIGGER_4; 1787 } else { 1788 sc->sc_fifo = 0; 1789 } 1790 1791 if (sc->sc_type == COM_TYPE_INGENIC) 1792 sc->sc_fifo |= FIFO_UART_ON; 1793 1794 /* And copy to tty. */ 1795 tp->t_ispeed = t->c_ospeed; 1796 tp->t_ospeed = t->c_ospeed; 1797 tp->t_cflag = t->c_cflag; 1798 1799 if (!sc->sc_heldchange) { 1800 if (sc->sc_tx_busy) { 1801 sc->sc_heldtbc = sc->sc_tbc; 1802 sc->sc_tbc = 0; 1803 sc->sc_heldchange = 1; 1804 } else 1805 com_loadchannelregs(sc); 1806 } 1807 1808 if (!ISSET(t->c_cflag, CHWFLOW)) { 1809 /* Disable the high water mark. */ 1810 sc->sc_r_hiwat = 0; 1811 sc->sc_r_lowat = 0; 1812 if (ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED)) { 1813 CLR(sc->sc_rx_flags, RX_TTY_OVERFLOWED); 1814 com_schedrx(sc); 1815 } 1816 if (ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED)) { 1817 CLR(sc->sc_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED); 1818 com_hwiflow(sc); 1819 } 1820 } else { 1821 sc->sc_r_hiwat = com_rbuf_hiwat; 1822 sc->sc_r_lowat = com_rbuf_lowat; 1823 } 1824 1825 com_mutex_exit(sc); 1826 1827 /* 1828 * Update the tty layer's idea of the carrier bit, in case we changed 1829 * CLOCAL or MDMBUF. We don't hang up here; we only do that by 1830 * explicit request. 1831 */ 1832 if (sc->sc_type == COM_TYPE_INGENIC) { 1833 /* no DCD here */ 1834 (void) (*tp->t_linesw->l_modem)(tp, 1); 1835 } else 1836 (void) (*tp->t_linesw->l_modem)(tp, ISSET(sc->sc_msr, MSR_DCD)); 1837 1838 #ifdef COM_DEBUG 1839 if (com_debug) 1840 comstatus(sc, "comparam "); 1841 #endif 1842 1843 if (!ISSET(t->c_cflag, CHWFLOW)) { 1844 if (sc->sc_tx_stopped) { 1845 sc->sc_tx_stopped = 0; 1846 comstart(tp); 1847 } 1848 } 1849 1850 return (0); 1851 } 1852 1853 void 1854 com_iflush(struct com_softc *sc) 1855 { 1856 struct com_regs *regsp = &sc->sc_regs; 1857 uint8_t fifo; 1858 #ifdef DIAGNOSTIC 1859 int reg; 1860 #endif 1861 int timo; 1862 1863 #ifdef DIAGNOSTIC 1864 reg = 0xffff; 1865 #endif 1866 timo = 50000; 1867 /* flush any pending I/O */ 1868 while (ISSET(CSR_READ_1(regsp, COM_REG_LSR), LSR_RXRDY) 1869 && --timo) 1870 #ifdef DIAGNOSTIC 1871 reg = 1872 #else 1873 (void) 1874 #endif 1875 CSR_READ_1(regsp, COM_REG_RXDATA); 1876 #ifdef DIAGNOSTIC 1877 if (!timo) 1878 aprint_error_dev(sc->sc_dev, "com_iflush timeout %02x\n", reg); 1879 #endif 1880 1881 switch (sc->sc_type) { 1882 case COM_TYPE_16750: 1883 case COM_TYPE_DW_APB: 1884 /* 1885 * Reset all Rx/Tx FIFO, preserve current FIFO length. 1886 * This should prevent triggering busy interrupt while 1887 * manipulating divisors. 1888 */ 1889 fifo = CSR_READ_1(regsp, COM_REG_FIFO) & (FIFO_TRIGGER_1 | 1890 FIFO_TRIGGER_4 | FIFO_TRIGGER_8 | FIFO_TRIGGER_14); 1891 CSR_WRITE_1(regsp, COM_REG_FIFO, 1892 fifo | FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST); 1893 delay(100); 1894 break; 1895 } 1896 } 1897 1898 void 1899 com_loadchannelregs(struct com_softc *sc) 1900 { 1901 struct com_regs *regsp = &sc->sc_regs; 1902 1903 /* XXXXX necessary? */ 1904 com_iflush(sc); 1905 1906 if (sc->sc_type == COM_TYPE_PXA2x0) 1907 CSR_WRITE_1(regsp, COM_REG_IER, IER_EUART); 1908 else 1909 CSR_WRITE_1(regsp, COM_REG_IER, 0); 1910 1911 if (sc->sc_type == COM_TYPE_OMAP) { 1912 /* disable before changing settings */ 1913 CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_DISABLE); 1914 } 1915 1916 if (ISSET(sc->sc_hwflags, COM_HW_FLOW)) { 1917 KASSERT(sc->sc_type != COM_TYPE_AU1x00); 1918 KASSERT(sc->sc_type != COM_TYPE_16550_NOERS); 1919 /* no EFR on alchemy */ 1920 CSR_WRITE_1(regsp, COM_REG_LCR, LCR_EERS); 1921 CSR_WRITE_1(regsp, COM_REG_EFR, sc->sc_efr); 1922 } 1923 if (ISSET(sc->sc_hwflags, COM_HW_MCRPRESCALE)) { 1924 /* Unlock the prescale bit */ 1925 CSR_WRITE_1(regsp, COM_REG_LCR, LCR_EERS); 1926 CSR_WRITE_1(regsp, COM_REG_EFR, sc->sc_efr | EFR_EFCR); 1927 } 1928 if (sc->sc_type == COM_TYPE_AU1x00) { 1929 /* alchemy has single separate 16-bit clock divisor register */ 1930 CSR_WRITE_2(regsp, COM_REG_DLBL, sc->sc_dlbl + 1931 (sc->sc_dlbh << 8)); 1932 } else { 1933 CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr | LCR_DLAB); 1934 CSR_WRITE_1(regsp, COM_REG_DLBL, sc->sc_dlbl); 1935 CSR_WRITE_1(regsp, COM_REG_DLBH, sc->sc_dlbh); 1936 } 1937 CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr); 1938 CSR_WRITE_1(regsp, COM_REG_MCR, sc->sc_mcr_active = sc->sc_mcr); 1939 CSR_WRITE_1(regsp, COM_REG_FIFO, sc->sc_fifo); 1940 if (ISSET(sc->sc_hwflags, COM_HW_MCRPRESCALE)) { 1941 /* Lock the prescale bit back up again */ 1942 CSR_WRITE_1(regsp, COM_REG_LCR, LCR_EERS); 1943 CSR_WRITE_1(regsp, COM_REG_EFR, sc->sc_efr); 1944 CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr); 1945 } 1946 if (sc->sc_type == COM_TYPE_HAYESP) { 1947 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD1, 1948 HAYESP_SETPRESCALER); 1949 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2, 1950 sc->sc_prescaler); 1951 } 1952 if (sc->sc_type == COM_TYPE_OMAP) { 1953 /* setup the fifos. the FCR value is not used as long 1954 as SCR[6] and SCR[7] are 0, which they are at reset 1955 and we never touch the SCR register */ 1956 uint8_t rx_fifo_trig = 40; 1957 uint8_t tx_fifo_trig = 60; 1958 uint8_t rx_start = 8; 1959 uint8_t rx_halt = 60; 1960 uint8_t tlr_value = ((rx_fifo_trig>>2) << 4) | (tx_fifo_trig>>2); 1961 uint8_t tcr_value = ((rx_start>>2) << 4) | (rx_halt>>2); 1962 1963 /* enable access to TCR & TLR */ 1964 CSR_WRITE_1(regsp, COM_REG_MCR, sc->sc_mcr | MCR_TCR_TLR); 1965 1966 /* write tcr and tlr values */ 1967 CSR_WRITE_1(regsp, COM_REG_TLR, tlr_value); 1968 CSR_WRITE_1(regsp, COM_REG_TCR, tcr_value); 1969 1970 /* disable access to TCR & TLR */ 1971 CSR_WRITE_1(regsp, COM_REG_MCR, sc->sc_mcr); 1972 1973 /* enable again, but mode is based on speed */ 1974 if (sc->sc_tty->t_termios.c_ospeed > 230400) { 1975 CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_UART_13X); 1976 } else { 1977 CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_UART_16X); 1978 } 1979 } 1980 1981 CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier); 1982 } 1983 1984 int 1985 comhwiflow(struct tty *tp, int block) 1986 { 1987 struct com_softc *sc = 1988 device_lookup_private(&com_cd, COMUNIT(tp->t_dev)); 1989 1990 if (COM_ISALIVE(sc) == 0) 1991 return (0); 1992 1993 if (sc->sc_mcr_rts == 0) 1994 return (0); 1995 1996 com_mutex_enter(sc); 1997 1998 if (block) { 1999 if (!ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) { 2000 SET(sc->sc_rx_flags, RX_TTY_BLOCKED); 2001 com_hwiflow(sc); 2002 } 2003 } else { 2004 if (ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED)) { 2005 CLR(sc->sc_rx_flags, RX_TTY_OVERFLOWED); 2006 com_schedrx(sc); 2007 } 2008 if (ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) { 2009 CLR(sc->sc_rx_flags, RX_TTY_BLOCKED); 2010 com_hwiflow(sc); 2011 } 2012 } 2013 2014 com_mutex_exit(sc); 2015 return (1); 2016 } 2017 2018 int 2019 comhwiflowsoft(struct tty *tp, int block) 2020 { 2021 int r; 2022 2023 mutex_spin_exit(&tty_lock); 2024 r = comhwiflow(tp, block); 2025 mutex_spin_enter(&tty_lock); 2026 2027 return r; 2028 } 2029 2030 /* 2031 * (un)block input via hw flowcontrol 2032 */ 2033 void 2034 com_hwiflow(struct com_softc *sc) 2035 { 2036 struct com_regs *regsp= &sc->sc_regs; 2037 2038 if (sc->sc_mcr_rts == 0) 2039 return; 2040 2041 if (ISSET(sc->sc_rx_flags, RX_ANY_BLOCK)) { 2042 CLR(sc->sc_mcr, sc->sc_mcr_rts); 2043 CLR(sc->sc_mcr_active, sc->sc_mcr_rts); 2044 } else { 2045 SET(sc->sc_mcr, sc->sc_mcr_rts); 2046 SET(sc->sc_mcr_active, sc->sc_mcr_rts); 2047 } 2048 CSR_WRITE_1(regsp, COM_REG_MCR, sc->sc_mcr_active); 2049 } 2050 2051 2052 void 2053 comstart(struct tty *tp) 2054 { 2055 struct com_softc *sc = 2056 device_lookup_private(&com_cd, COMUNIT(tp->t_dev)); 2057 struct com_regs *regsp = &sc->sc_regs; 2058 2059 if (COM_ISALIVE(sc) == 0) 2060 return; 2061 2062 if (ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP)) 2063 return; 2064 if (sc->sc_tx_stopped) 2065 return; 2066 if (!ttypull(tp)) 2067 return; 2068 2069 /* Grab the first contiguous region of buffer space. */ 2070 { 2071 u_char *tba; 2072 int tbc; 2073 2074 tba = tp->t_outq.c_cf; 2075 tbc = ndqb(&tp->t_outq, 0); 2076 2077 com_mutex_enter(sc); 2078 2079 sc->sc_tba = tba; 2080 sc->sc_tbc = tbc; 2081 } 2082 2083 SET(tp->t_state, TS_BUSY); 2084 sc->sc_tx_busy = 1; 2085 2086 /* Enable transmit completion interrupts if necessary. */ 2087 if (!ISSET(sc->sc_ier, IER_ETXRDY)) { 2088 SET(sc->sc_ier, IER_ETXRDY); 2089 CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier); 2090 } 2091 2092 /* Output the first chunk of the contiguous buffer. */ 2093 if (!ISSET(sc->sc_hwflags, COM_HW_NO_TXPRELOAD)) { 2094 u_int n; 2095 2096 n = sc->sc_tbc; 2097 if (n > sc->sc_fifolen) 2098 n = sc->sc_fifolen; 2099 CSR_WRITE_MULTI(regsp, COM_REG_TXDATA, sc->sc_tba, n); 2100 sc->sc_tbc -= n; 2101 sc->sc_tba += n; 2102 } 2103 2104 com_mutex_exit(sc); 2105 } 2106 2107 /* Do an ugly thing in the softirq case. We can't have a spin lock held right now, 2108 * so drop it. 2109 */ 2110 2111 void 2112 comstartsoft(struct tty *tp) 2113 { 2114 mutex_spin_exit(&tty_lock); 2115 comstart(tp); 2116 mutex_spin_enter(&tty_lock); 2117 } 2118 2119 /* 2120 * Stop output on a line. 2121 * 2122 * For reasons that are not obvious dropping the tty_lock spin lock was not 2123 * enough for the stop call and if you try to acquire a adaptive lock while 2124 * holding a spin lock you will panic, so just don't acquire it. 2125 */ 2126 void 2127 comstop(struct tty *tp, int flag) 2128 { 2129 struct com_softc *sc = 2130 device_lookup_private(&com_cd, COMUNIT(tp->t_dev)); 2131 2132 if (!ISSET(sc->sc_hwflags, COM_HW_SOFTIRQ)) 2133 com_mutex_enter(sc); 2134 if (ISSET(tp->t_state, TS_BUSY)) { 2135 /* Stop transmitting at the next chunk. */ 2136 sc->sc_tbc = 0; 2137 sc->sc_heldtbc = 0; 2138 if (!ISSET(tp->t_state, TS_TTSTOP)) 2139 SET(tp->t_state, TS_FLUSH); 2140 } 2141 if (!ISSET(sc->sc_hwflags, COM_HW_SOFTIRQ)) 2142 com_mutex_exit(sc); 2143 } 2144 2145 2146 void 2147 comdiag(void *arg) 2148 { 2149 struct com_softc *sc = arg; 2150 int overflows, floods; 2151 2152 com_mutex_enter(sc); 2153 overflows = sc->sc_overflows; 2154 sc->sc_overflows = 0; 2155 floods = sc->sc_floods; 2156 sc->sc_floods = 0; 2157 sc->sc_errors = 0; 2158 com_mutex_exit(sc); 2159 2160 log(LOG_WARNING, "%s: %d silo overflow%s, %d ibuf flood%s\n", 2161 device_xname(sc->sc_dev), 2162 overflows, overflows == 1 ? "" : "s", 2163 floods, floods == 1 ? "" : "s"); 2164 } 2165 2166 static inline void 2167 com_rxsoft(struct com_softc *sc, struct tty *tp) 2168 { 2169 int (*rint)(int, struct tty *) = tp->t_linesw->l_rint; 2170 u_char *get, *end; 2171 u_int cc, scc; 2172 u_char lsr; 2173 int code; 2174 2175 end = sc->sc_ebuf; 2176 get = sc->sc_rbget; 2177 scc = cc = com_rbuf_size - sc->sc_rbavail; 2178 2179 if (cc == com_rbuf_size) { 2180 sc->sc_floods++; 2181 if (sc->sc_errors++ == 0) 2182 callout_reset(&sc->sc_diag_callout, 60 * hz, 2183 comdiag, sc); 2184 } 2185 2186 /* If not yet open, drop the entire buffer content here */ 2187 if (!ISSET(tp->t_state, TS_ISOPEN)) { 2188 get += cc << 1; 2189 if (get >= end) 2190 get -= com_rbuf_size << 1; 2191 cc = 0; 2192 } 2193 while (cc) { 2194 code = get[0]; 2195 lsr = get[1]; 2196 if (ISSET(lsr, LSR_OE | LSR_BI | LSR_FE | LSR_PE)) { 2197 if (ISSET(lsr, LSR_OE)) { 2198 sc->sc_overflows++; 2199 if (sc->sc_errors++ == 0) 2200 callout_reset(&sc->sc_diag_callout, 2201 60 * hz, comdiag, sc); 2202 } 2203 if (ISSET(lsr, LSR_BI | LSR_FE)) 2204 SET(code, TTY_FE); 2205 if (ISSET(lsr, LSR_PE)) 2206 SET(code, TTY_PE); 2207 } 2208 if ((*rint)(code, tp) == -1) { 2209 /* 2210 * The line discipline's buffer is out of space. 2211 */ 2212 if (!ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) { 2213 /* 2214 * We're either not using flow control, or the 2215 * line discipline didn't tell us to block for 2216 * some reason. Either way, we have no way to 2217 * know when there's more space available, so 2218 * just drop the rest of the data. 2219 */ 2220 get += cc << 1; 2221 if (get >= end) 2222 get -= com_rbuf_size << 1; 2223 cc = 0; 2224 } else { 2225 /* 2226 * Don't schedule any more receive processing 2227 * until the line discipline tells us there's 2228 * space available (through comhwiflow()). 2229 * Leave the rest of the data in the input 2230 * buffer. 2231 */ 2232 SET(sc->sc_rx_flags, RX_TTY_OVERFLOWED); 2233 } 2234 break; 2235 } 2236 get += 2; 2237 if (get >= end) 2238 get = sc->sc_rbuf; 2239 cc--; 2240 } 2241 2242 if (cc != scc) { 2243 sc->sc_rbget = get; 2244 com_mutex_enter(sc); 2245 2246 cc = sc->sc_rbavail += scc - cc; 2247 /* Buffers should be ok again, release possible block. */ 2248 if (cc >= sc->sc_r_lowat) { 2249 if (ISSET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED)) { 2250 CLR(sc->sc_rx_flags, RX_IBUF_OVERFLOWED); 2251 SET(sc->sc_ier, IER_ERXRDY); 2252 if (sc->sc_type == COM_TYPE_PXA2x0) 2253 SET(sc->sc_ier, IER_ERXTOUT); 2254 if (sc->sc_type == COM_TYPE_INGENIC || 2255 sc->sc_type == COM_TYPE_TEGRA) 2256 SET(sc->sc_ier, IER_ERXTOUT); 2257 2258 CSR_WRITE_1(&sc->sc_regs, COM_REG_IER, 2259 sc->sc_ier); 2260 } 2261 if (ISSET(sc->sc_rx_flags, RX_IBUF_BLOCKED)) { 2262 CLR(sc->sc_rx_flags, RX_IBUF_BLOCKED); 2263 com_hwiflow(sc); 2264 } 2265 } 2266 com_mutex_exit(sc); 2267 } 2268 } 2269 2270 static inline void 2271 com_txsoft(struct com_softc *sc, struct tty *tp) 2272 { 2273 2274 CLR(tp->t_state, TS_BUSY); 2275 if (ISSET(tp->t_state, TS_FLUSH)) 2276 CLR(tp->t_state, TS_FLUSH); 2277 else 2278 ndflush(&tp->t_outq, (int)(sc->sc_tba - tp->t_outq.c_cf)); 2279 2280 /* This used to be (*tp->t_linesw->l_start)(tp) which is probably more 2281 * correct, however... in the softirq case, it won't work as comstartsoft 2282 * will try and drop the spin lock and there isn't one of those when called 2283 * from here. In any case, l_start is just comstartsoft or comstart anyway 2284 * and there are other places in this code that just calls comstart, so 2285 * do likewise. 2286 */ 2287 comstart(tp); 2288 } 2289 2290 static inline void 2291 com_stsoft(struct com_softc *sc, struct tty *tp) 2292 { 2293 u_char msr, delta; 2294 2295 com_mutex_enter(sc); 2296 msr = sc->sc_msr; 2297 delta = sc->sc_msr_delta; 2298 sc->sc_msr_delta = 0; 2299 com_mutex_exit(sc); 2300 2301 if (ISSET(delta, sc->sc_msr_dcd)) { 2302 /* 2303 * Inform the tty layer that carrier detect changed. 2304 */ 2305 (void) (*tp->t_linesw->l_modem)(tp, ISSET(msr, MSR_DCD)); 2306 } 2307 2308 if (ISSET(delta, sc->sc_msr_cts)) { 2309 /* Block or unblock output according to flow control. */ 2310 if (ISSET(msr, sc->sc_msr_cts)) { 2311 sc->sc_tx_stopped = 0; 2312 /* See note above about (*tp->t_linesw->l_start)(tp); */ 2313 comstart(tp); 2314 } else { 2315 sc->sc_tx_stopped = 1; 2316 } 2317 } 2318 2319 #ifdef COM_DEBUG 2320 if (com_debug) 2321 comstatus(sc, "com_stsoft"); 2322 #endif 2323 } 2324 2325 void 2326 comsoft(void *arg) 2327 { 2328 struct com_softc *sc = arg; 2329 struct tty *tp; 2330 2331 if (COM_ISALIVE(sc) == 0) 2332 return; 2333 2334 tp = sc->sc_tty; 2335 2336 if (sc->sc_rx_ready) { 2337 sc->sc_rx_ready = 0; 2338 com_rxsoft(sc, tp); 2339 } 2340 2341 if (sc->sc_st_check) { 2342 sc->sc_st_check = 0; 2343 com_stsoft(sc, tp); 2344 } 2345 2346 if (sc->sc_tx_done) { 2347 sc->sc_tx_done = 0; 2348 com_txsoft(sc, tp); 2349 } 2350 } 2351 2352 static void 2353 comsoftwq(struct work *wk, void *arg) 2354 { 2355 struct com_softc *sc = arg; 2356 struct com_regs *regsp = &sc->sc_regs; 2357 2358 if (CSR_HAS_ERROR(regsp)) { 2359 return; 2360 } 2361 2362 comsoft(sc); 2363 } 2364 2365 int 2366 comintr(void *arg) 2367 { 2368 struct com_softc *sc = arg; 2369 struct com_regs *regsp = &sc->sc_regs; 2370 2371 u_char *put, *end; 2372 u_int cc; 2373 u_char lsr, iir; 2374 2375 if (COM_ISALIVE(sc) == 0) 2376 return (0); 2377 2378 KASSERT(regsp != NULL); 2379 2380 com_mutex_enter(sc); 2381 iir = CSR_READ_1(regsp, COM_REG_IIR); 2382 2383 if (CSR_HAS_ERROR(regsp)) { 2384 com_mutex_exit(sc); 2385 return (0); 2386 } 2387 2388 /* Handle ns16750-specific busy interrupt. */ 2389 if (sc->sc_type == COM_TYPE_16750 && 2390 (iir & IIR_BUSY) == IIR_BUSY) { 2391 for (int timeout = 10000; 2392 (CSR_READ_1(regsp, COM_REG_USR) & 0x1) != 0; timeout--) { 2393 if (CSR_HAS_ERROR(regsp)) { 2394 com_mutex_exit(sc); 2395 return (0); 2396 } 2397 if (timeout <= 0) { 2398 aprint_error_dev(sc->sc_dev, 2399 "timeout while waiting for BUSY interrupt " 2400 "acknowledge\n"); 2401 com_mutex_exit(sc); 2402 return (0); 2403 } 2404 } 2405 2406 CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr); 2407 iir = CSR_READ_1(regsp, COM_REG_IIR); 2408 } 2409 2410 /* DesignWare APB UART BUSY interrupt */ 2411 if (sc->sc_type == COM_TYPE_DW_APB && 2412 (iir & IIR_BUSY) == IIR_BUSY) { 2413 if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 2414 (void)CSR_READ_1(regsp, COM_REG_USR); 2415 } else if ((CSR_READ_1(regsp, COM_REG_USR) & 0x1) != 0) { 2416 CSR_WRITE_1(regsp, COM_REG_HALT, HALT_CHCFG_EN); 2417 CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr | LCR_DLAB); 2418 CSR_WRITE_1(regsp, COM_REG_DLBL, sc->sc_dlbl); 2419 CSR_WRITE_1(regsp, COM_REG_DLBH, sc->sc_dlbh); 2420 CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr); 2421 CSR_WRITE_1(regsp, COM_REG_HALT, 2422 HALT_CHCFG_EN | HALT_CHCFG_UD); 2423 for (int timeout = 10000000; 2424 (CSR_READ_1(regsp, COM_REG_HALT) & HALT_CHCFG_UD) != 0; 2425 timeout--) { 2426 if (CSR_HAS_ERROR(regsp)) { 2427 com_mutex_exit(sc); 2428 return (0); 2429 } 2430 if (timeout <= 0) { 2431 aprint_error_dev(sc->sc_dev, 2432 "timeout while waiting for HALT " 2433 "update acknowledge 0x%x 0x%x\n", 2434 CSR_READ_1(regsp, COM_REG_HALT), 2435 CSR_READ_1(regsp, COM_REG_USR)); 2436 break; 2437 } 2438 } 2439 CSR_WRITE_1(regsp, COM_REG_HALT, 0); 2440 (void)CSR_READ_1(regsp, COM_REG_USR); 2441 } else { 2442 CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr | LCR_DLAB); 2443 CSR_WRITE_1(regsp, COM_REG_DLBL, sc->sc_dlbl); 2444 CSR_WRITE_1(regsp, COM_REG_DLBH, sc->sc_dlbh); 2445 CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr); 2446 } 2447 } 2448 2449 end = sc->sc_ebuf; 2450 put = sc->sc_rbput; 2451 cc = sc->sc_rbavail; 2452 2453 if (ISSET(iir, IIR_NOPEND)) { 2454 if (ISSET(sc->sc_hwflags, COM_HW_BROKEN_ETXRDY)) 2455 goto do_tx; 2456 com_mutex_exit(sc); 2457 return (0); 2458 } 2459 2460 again: do { 2461 u_char msr, delta; 2462 2463 if (CSR_HAS_ERROR(regsp)) { 2464 com_mutex_exit(sc); 2465 return (0); 2466 } 2467 2468 lsr = CSR_READ_1(regsp, COM_REG_LSR); 2469 if (ISSET(lsr, LSR_BI)) { 2470 if (cn_check_magic(sc->sc_tty->t_dev, 2471 CNC_BREAK, &com_cnm_state)) { 2472 continue; 2473 } 2474 #if defined(KGDB) && !defined(DDB) 2475 if (ISSET(sc->sc_hwflags, COM_HW_KGDB)) { 2476 kgdb_connect(1); 2477 continue; 2478 } 2479 #endif 2480 } 2481 2482 if (sc->sc_type == COM_TYPE_BCMAUXUART && ISSET(iir, IIR_RXRDY)) 2483 lsr |= LSR_RXRDY; 2484 2485 if (ISSET(lsr, LSR_RCV_MASK) && 2486 !ISSET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED)) { 2487 while (cc > 0) { 2488 put[0] = CSR_READ_1(regsp, COM_REG_RXDATA); 2489 put[1] = lsr; 2490 if (cn_check_magic(sc->sc_tty->t_dev, 2491 put[0], &com_cnm_state)) { 2492 goto next; 2493 } 2494 put += 2; 2495 if (put >= end) 2496 put = sc->sc_rbuf; 2497 cc--; 2498 next: 2499 lsr = CSR_READ_1(regsp, COM_REG_LSR); 2500 if (!ISSET(lsr, LSR_RCV_MASK)) 2501 break; 2502 2503 if (CSR_HAS_ERROR(regsp)) { 2504 com_mutex_exit(sc); 2505 return (0); 2506 } 2507 } 2508 2509 /* 2510 * Current string of incoming characters ended because 2511 * no more data was available or we ran out of space. 2512 * Schedule a receive event if any data was received. 2513 * If we're out of space, turn off receive interrupts. 2514 */ 2515 sc->sc_rbput = put; 2516 sc->sc_rbavail = cc; 2517 if (!ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED)) 2518 sc->sc_rx_ready = 1; 2519 2520 /* 2521 * See if we are in danger of overflowing a buffer. If 2522 * so, use hardware flow control to ease the pressure. 2523 */ 2524 if (!ISSET(sc->sc_rx_flags, RX_IBUF_BLOCKED) && 2525 cc < sc->sc_r_hiwat) { 2526 SET(sc->sc_rx_flags, RX_IBUF_BLOCKED); 2527 com_hwiflow(sc); 2528 } 2529 2530 /* 2531 * If we're out of space, disable receive interrupts 2532 * until the queue has drained a bit. 2533 */ 2534 if (!cc) { 2535 SET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED); 2536 switch (sc->sc_type) { 2537 case COM_TYPE_PXA2x0: 2538 CLR(sc->sc_ier, IER_ERXRDY|IER_ERXTOUT); 2539 break; 2540 case COM_TYPE_INGENIC: 2541 case COM_TYPE_TEGRA: 2542 CLR(sc->sc_ier, 2543 IER_ERXRDY | IER_ERXTOUT); 2544 break; 2545 default: 2546 CLR(sc->sc_ier, IER_ERXRDY); 2547 break; 2548 } 2549 CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier); 2550 } 2551 } else { 2552 if ((iir & (IIR_RXRDY|IIR_TXRDY)) == IIR_RXRDY) { 2553 (void) CSR_READ_1(regsp, COM_REG_RXDATA); 2554 continue; 2555 } 2556 } 2557 2558 msr = CSR_READ_1(regsp, COM_REG_MSR); 2559 if (CSR_HAS_ERROR(regsp)) { 2560 com_mutex_exit(sc); 2561 return (0); 2562 } 2563 delta = msr ^ sc->sc_msr; 2564 sc->sc_msr = msr; 2565 if ((sc->sc_pps_state.ppsparam.mode & PPS_CAPTUREBOTH) && 2566 (delta & MSR_DCD)) { 2567 mutex_spin_enter(&timecounter_lock); 2568 pps_capture(&sc->sc_pps_state); 2569 pps_event(&sc->sc_pps_state, 2570 (msr & MSR_DCD) ? 2571 PPS_CAPTUREASSERT : 2572 PPS_CAPTURECLEAR); 2573 mutex_spin_exit(&timecounter_lock); 2574 } 2575 2576 /* 2577 * Process normal status changes 2578 */ 2579 if (ISSET(delta, sc->sc_msr_mask)) { 2580 SET(sc->sc_msr_delta, delta); 2581 2582 /* 2583 * Stop output immediately if we lose the output 2584 * flow control signal or carrier detect. 2585 */ 2586 if (ISSET(~msr, sc->sc_msr_mask)) { 2587 sc->sc_tbc = 0; 2588 sc->sc_heldtbc = 0; 2589 #ifdef COM_DEBUG 2590 if (com_debug) 2591 comstatus(sc, "comintr "); 2592 #endif 2593 } 2594 2595 sc->sc_st_check = 1; 2596 } 2597 } while (!ISSET((iir = 2598 CSR_READ_1(regsp, COM_REG_IIR)), IIR_NOPEND) && 2599 /* 2600 * Since some device (e.g., ST16C1550) doesn't clear IIR_TXRDY 2601 * by IIR read, so we can't do this way: `process all interrupts, 2602 * then do TX if possible'. 2603 */ 2604 (iir & IIR_IMASK) != IIR_TXRDY); 2605 2606 do_tx: 2607 /* 2608 * Read LSR again, since there may be an interrupt between 2609 * the last LSR read and IIR read above. 2610 */ 2611 lsr = CSR_READ_1(regsp, COM_REG_LSR); 2612 2613 if (CSR_HAS_ERROR(regsp)) { 2614 com_mutex_exit(sc); 2615 return (0); 2616 } 2617 2618 /* 2619 * See if data can be transmitted as well. 2620 * Schedule tx done event if no data left 2621 * and tty was marked busy. 2622 */ 2623 if (ISSET(lsr, LSR_TXRDY)) { 2624 /* 2625 * If we've delayed a parameter change, do it now, and restart 2626 * output. 2627 */ 2628 if (sc->sc_heldchange) { 2629 com_loadchannelregs(sc); 2630 sc->sc_heldchange = 0; 2631 sc->sc_tbc = sc->sc_heldtbc; 2632 sc->sc_heldtbc = 0; 2633 } 2634 2635 /* Output the next chunk of the contiguous buffer, if any. */ 2636 if (sc->sc_tbc > 0) { 2637 u_int n; 2638 2639 n = sc->sc_tbc; 2640 if (n > sc->sc_fifolen) 2641 n = sc->sc_fifolen; 2642 CSR_WRITE_MULTI(regsp, COM_REG_TXDATA, sc->sc_tba, n); 2643 sc->sc_tbc -= n; 2644 sc->sc_tba += n; 2645 } else { 2646 /* Disable transmit completion interrupts if necessary. */ 2647 if (ISSET(sc->sc_ier, IER_ETXRDY)) { 2648 CLR(sc->sc_ier, IER_ETXRDY); 2649 CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier); 2650 } 2651 if (sc->sc_tx_busy) { 2652 sc->sc_tx_busy = 0; 2653 sc->sc_tx_done = 1; 2654 } 2655 } 2656 } 2657 2658 if (!ISSET((iir = CSR_READ_1(regsp, COM_REG_IIR)), IIR_NOPEND)) 2659 goto again; 2660 2661 com_mutex_exit(sc); 2662 2663 if (CSR_HAS_ERROR(regsp)) { 2664 return (0); 2665 } 2666 2667 /* Wake up the poller. */ 2668 if ((sc->sc_rx_ready | sc->sc_st_check | sc->sc_tx_done) != 0) { 2669 if (ISSET(sc->sc_hwflags, COM_HW_SOFTIRQ)) 2670 workqueue_enqueue(sc->sc_wq,(struct work *)&sc->sc_wk,NULL); 2671 else 2672 softint_schedule(sc->sc_si); 2673 } 2674 2675 #ifdef RND_COM 2676 rnd_add_uint32(&sc->rnd_source, iir | lsr); 2677 #endif 2678 2679 return (1); 2680 } 2681 2682 /* 2683 * The following functions are polled getc and putc routines, shared 2684 * by the console and kgdb glue. 2685 * 2686 * The read-ahead code is so that you can detect pending in-band 2687 * cn_magic in polled mode while doing output rather than having to 2688 * wait until the kernel decides it needs input. 2689 */ 2690 2691 #define MAX_READAHEAD 20 2692 static int com_readahead[MAX_READAHEAD]; 2693 static int com_readaheadcount = 0; 2694 2695 int 2696 com_common_getc(dev_t dev, struct com_regs *regsp) 2697 { 2698 int s = splserial(); 2699 u_char stat, c; 2700 2701 /* got a character from reading things earlier */ 2702 if (com_readaheadcount > 0) { 2703 int i; 2704 2705 c = com_readahead[0]; 2706 for (i = 1; i < com_readaheadcount; i++) { 2707 com_readahead[i-1] = com_readahead[i]; 2708 } 2709 com_readaheadcount--; 2710 splx(s); 2711 return (c); 2712 } 2713 2714 /* don't block until a character becomes available */ 2715 if (!ISSET(stat = CSR_READ_1(regsp, COM_REG_LSR), LSR_RXRDY)) { 2716 splx(s); 2717 return -1; 2718 } 2719 2720 c = CSR_READ_1(regsp, COM_REG_RXDATA); 2721 stat = CSR_READ_1(regsp, COM_REG_IIR); 2722 2723 cn_check_magic(dev, c, &com_cnm_state); 2724 2725 splx(s); 2726 return (c); 2727 } 2728 2729 static void 2730 com_common_putc(dev_t dev, struct com_regs *regsp, int c, int with_readahead) 2731 { 2732 int s = splserial(); 2733 int cin, stat, timo; 2734 2735 if (with_readahead && com_readaheadcount < MAX_READAHEAD 2736 && ISSET(stat = CSR_READ_1(regsp, COM_REG_LSR), LSR_RXRDY)) { 2737 cin = CSR_READ_1(regsp, COM_REG_RXDATA); 2738 stat = CSR_READ_1(regsp, COM_REG_IIR); 2739 cn_check_magic(dev, cin, &com_cnm_state); 2740 com_readahead[com_readaheadcount++] = cin; 2741 } 2742 2743 /* wait for any pending transmission to finish */ 2744 timo = 150000; 2745 while (!ISSET(CSR_READ_1(regsp, COM_REG_LSR), LSR_TXRDY) && --timo) 2746 continue; 2747 2748 CSR_WRITE_1(regsp, COM_REG_TXDATA, c); 2749 COM_BARRIER(regsp, BR | BW); 2750 2751 splx(s); 2752 } 2753 2754 /* 2755 * Initialize UART for use as console or KGDB line. 2756 */ 2757 int 2758 cominit(struct com_regs *regsp, int rate, int frequency, int type, 2759 tcflag_t cflag) 2760 { 2761 2762 if (bus_space_map(regsp->cr_iot, regsp->cr_iobase, regsp->cr_nports, 0, 2763 ®sp->cr_ioh)) 2764 return (ENOMEM); /* ??? */ 2765 2766 if (type == COM_TYPE_OMAP) { 2767 /* disable before changing settings */ 2768 CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_DISABLE); 2769 } 2770 2771 rate = comspeed(rate, frequency, type); 2772 if (rate != -1) { 2773 if (type == COM_TYPE_AU1x00) { 2774 /* no EFR on alchemy */ 2775 CSR_WRITE_2(regsp, COM_REG_DLBL, rate); 2776 } else { 2777 if ((type != COM_TYPE_16550_NOERS) && 2778 (type != COM_TYPE_INGENIC)) { 2779 CSR_WRITE_1(regsp, COM_REG_LCR, LCR_EERS); 2780 CSR_WRITE_1(regsp, COM_REG_EFR, 0); 2781 } 2782 CSR_WRITE_1(regsp, COM_REG_LCR, LCR_DLAB); 2783 CSR_WRITE_1(regsp, COM_REG_DLBL, rate & 0xff); 2784 CSR_WRITE_1(regsp, COM_REG_DLBH, rate >> 8); 2785 } 2786 } 2787 CSR_WRITE_1(regsp, COM_REG_LCR, cflag2lcr(cflag)); 2788 CSR_WRITE_1(regsp, COM_REG_MCR, MCR_DTR | MCR_RTS); 2789 2790 if (type == COM_TYPE_INGENIC) { 2791 CSR_WRITE_1(regsp, COM_REG_FIFO, 2792 FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | 2793 FIFO_TRIGGER_1 | FIFO_UART_ON); 2794 } else { 2795 CSR_WRITE_1(regsp, COM_REG_FIFO, 2796 FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | 2797 FIFO_TRIGGER_1); 2798 } 2799 2800 if (type == COM_TYPE_OMAP) { 2801 /* setup the fifos. the FCR value is not used as long 2802 as SCR[6] and SCR[7] are 0, which they are at reset 2803 and we never touch the SCR register */ 2804 uint8_t rx_fifo_trig = 40; 2805 uint8_t tx_fifo_trig = 60; 2806 uint8_t rx_start = 8; 2807 uint8_t rx_halt = 60; 2808 uint8_t tlr_value = ((rx_fifo_trig>>2) << 4) | (tx_fifo_trig>>2); 2809 uint8_t tcr_value = ((rx_start>>2) << 4) | (rx_halt>>2); 2810 2811 /* enable access to TCR & TLR */ 2812 CSR_WRITE_1(regsp, COM_REG_MCR, MCR_DTR | MCR_RTS | MCR_TCR_TLR); 2813 2814 /* write tcr and tlr values */ 2815 CSR_WRITE_1(regsp, COM_REG_TLR, tlr_value); 2816 CSR_WRITE_1(regsp, COM_REG_TCR, tcr_value); 2817 2818 /* disable access to TCR & TLR */ 2819 CSR_WRITE_1(regsp, COM_REG_MCR, MCR_DTR | MCR_RTS); 2820 2821 /* enable again, but mode is based on speed */ 2822 if (rate > 230400) { 2823 CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_UART_13X); 2824 } else { 2825 CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_UART_16X); 2826 } 2827 } 2828 2829 if (type == COM_TYPE_PXA2x0) 2830 CSR_WRITE_1(regsp, COM_REG_IER, IER_EUART); 2831 else 2832 CSR_WRITE_1(regsp, COM_REG_IER, 0); 2833 2834 return (0); 2835 } 2836 2837 int 2838 comcnattach1(struct com_regs *regsp, int rate, int frequency, int type, 2839 tcflag_t cflag) 2840 { 2841 int res; 2842 2843 comcons_info.regs = *regsp; 2844 2845 res = cominit(&comcons_info.regs, rate, frequency, type, cflag); 2846 if (res) 2847 return (res); 2848 2849 cn_tab = &comcons; 2850 cn_init_magic(&com_cnm_state); 2851 cn_set_magic("\047\001"); /* default magic is BREAK */ 2852 2853 comcons_info.frequency = frequency; 2854 comcons_info.type = type; 2855 comcons_info.rate = rate; 2856 comcons_info.cflag = cflag; 2857 2858 return (0); 2859 } 2860 2861 int 2862 comcnattach(bus_space_tag_t iot, bus_addr_t iobase, int rate, int frequency, 2863 int type, tcflag_t cflag) 2864 { 2865 struct com_regs regs; 2866 2867 /*XXX*/ 2868 bus_space_handle_t dummy_bsh; 2869 memset(&dummy_bsh, 0, sizeof(dummy_bsh)); 2870 2871 /* 2872 * dummy_bsh required because com_init_regs() wants it. A 2873 * real bus_space_handle will be filled in by cominit() later. 2874 * XXXJRT Detangle this mess eventually, plz. 2875 */ 2876 com_init_regs(®s, iot, dummy_bsh/*XXX*/, iobase); 2877 2878 return comcnattach1(®s, rate, frequency, type, cflag); 2879 } 2880 2881 static int 2882 comcnreattach(void) 2883 { 2884 return comcnattach1(&comcons_info.regs, comcons_info.rate, 2885 comcons_info.frequency, comcons_info.type, comcons_info.cflag); 2886 } 2887 2888 int 2889 comcngetc(dev_t dev) 2890 { 2891 2892 return (com_common_getc(dev, &comcons_info.regs)); 2893 } 2894 2895 /* 2896 * Console kernel output character routine. 2897 */ 2898 void 2899 comcnputc(dev_t dev, int c) 2900 { 2901 2902 com_common_putc(dev, &comcons_info.regs, c, cold); 2903 } 2904 2905 void 2906 comcnpollc(dev_t dev, int on) 2907 { 2908 2909 com_readaheadcount = 0; 2910 } 2911 2912 #ifdef KGDB 2913 int 2914 com_kgdb_attach1(struct com_regs *regsp, int rate, int frequency, int type, 2915 tcflag_t cflag) 2916 { 2917 int res; 2918 2919 if (bus_space_is_equal(regsp->cr_iot, comcons_info.regs.cr_iot) && 2920 regsp->cr_iobase == comcons_info.regs.cr_iobase) { 2921 #if !defined(DDB) 2922 return (EBUSY); /* cannot share with console */ 2923 #else 2924 comkgdbregs = *regsp; 2925 comkgdbregs.cr_ioh = comcons_info.regs.cr_ioh; 2926 #endif 2927 } else { 2928 comkgdbregs = *regsp; 2929 res = cominit(&comkgdbregs, rate, frequency, type, cflag); 2930 if (res) 2931 return (res); 2932 2933 /* 2934 * XXXfvdl this shouldn't be needed, but the cn_magic goo 2935 * expects this to be initialized 2936 */ 2937 cn_init_magic(&com_cnm_state); 2938 cn_set_magic("\047\001"); 2939 } 2940 2941 kgdb_attach(com_kgdb_getc, com_kgdb_putc, NULL); 2942 kgdb_dev = 123; /* unneeded, only to satisfy some tests */ 2943 2944 return (0); 2945 } 2946 2947 int 2948 com_kgdb_attach(bus_space_tag_t iot, bus_addr_t iobase, int rate, 2949 int frequency, int type, tcflag_t cflag) 2950 { 2951 struct com_regs regs; 2952 2953 /*XXX*/ 2954 bus_space_handle_t dummy_bsh; 2955 memset(&dummy_bsh, 0, sizeof(dummy_bsh)); 2956 2957 com_init_regs(®s, iot, dummy_bsh/*XXX*/, iobase); 2958 2959 return com_kgdb_attach1(®s, rate, frequency, type, cflag); 2960 } 2961 2962 /* ARGSUSED */ 2963 int 2964 com_kgdb_getc(void *arg) 2965 { 2966 2967 return (com_common_getc(NODEV, &comkgdbregs)); 2968 } 2969 2970 /* ARGSUSED */ 2971 void 2972 com_kgdb_putc(void *arg, int c) 2973 { 2974 2975 com_common_putc(NODEV, &comkgdbregs, c, 0); 2976 } 2977 #endif /* KGDB */ 2978 2979 /* 2980 * helper function to identify the com ports used by 2981 * console or KGDB (and not yet autoconf attached) 2982 */ 2983 int 2984 com_is_console(bus_space_tag_t iot, bus_addr_t iobase, bus_space_handle_t *ioh) 2985 { 2986 bus_space_handle_t help; 2987 2988 if (!comconsattached && 2989 bus_space_is_equal(iot, comcons_info.regs.cr_iot) && 2990 iobase == comcons_info.regs.cr_iobase) 2991 help = comcons_info.regs.cr_ioh; 2992 #ifdef KGDB 2993 else if (!com_kgdb_attached && 2994 bus_space_is_equal(iot, comkgdbregs.cr_iot) && 2995 iobase == comkgdbregs.cr_iobase) 2996 help = comkgdbregs.cr_ioh; 2997 #endif 2998 else 2999 return (0); 3000 3001 if (ioh) 3002 *ioh = help; 3003 return (1); 3004 } 3005 3006 /* 3007 * this routine exists to serve as a shutdown hook for systems that 3008 * have firmware which doesn't interact properly with a com device in 3009 * FIFO mode. 3010 */ 3011 bool 3012 com_cleanup(device_t self, int how) 3013 { 3014 struct com_softc *sc = device_private(self); 3015 3016 if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) 3017 CSR_WRITE_1(&sc->sc_regs, COM_REG_FIFO, 0); 3018 3019 return true; 3020 } 3021 3022 bool 3023 com_suspend(device_t self, const pmf_qual_t *qual) 3024 { 3025 struct com_softc *sc = device_private(self); 3026 3027 CSR_WRITE_1(&sc->sc_regs, COM_REG_IER, 0); 3028 (void)CSR_READ_1(&sc->sc_regs, COM_REG_IIR); 3029 3030 return true; 3031 } 3032 3033 bool 3034 com_resume(device_t self, const pmf_qual_t *qual) 3035 { 3036 struct com_softc *sc = device_private(self); 3037 3038 com_mutex_enter(sc); 3039 com_loadchannelregs(sc); 3040 com_mutex_exit(sc); 3041 3042 return true; 3043 } 3044