1 # $NetBSD: t_swsensor.sh,v 1.13 2021/12/05 08:16:10 msaitoh Exp $ 2 3 get_sensor_info() { 4 rump.envstat -x | \ 5 sed -e "\;swsensor;,\;/array;p" -e "d" 6 } 7 8 get_sensor_key() { 9 local v 10 v=$(get_sensor_info | grep -A1 $1 | grep integer | \ 11 sed -e 's;<[/a-z]*>;;g') 12 if [ -z "$v" ] ; then 13 v="key_$1_not_found" 14 fi 15 echo $v 16 } 17 18 get_powerd_event_count() { 19 grep "not running" powerd.log | wc -l 20 } 21 22 get_rnd_bits_count() { 23 env RUMPHIJACK=blanket=/dev/random:/dev/urandom \ 24 RUMP_SERVER=unix://t_swsensor_socket \ 25 LD_PRELOAD=/usr/lib/librumphijack.so rndctl -l | \ 26 grep "swsensor-sensor" | \ 27 awk '{print $3}' 28 } 29 30 check_powerd_event() { 31 event=$(grep "not running" powerd.log | \ 32 sed -e "$1p" -e "d" ) 33 event=${event##*//} 34 script=${event%% *} 35 event=${event#* } 36 device=${event%% *} 37 event=${event#* } 38 state=${event%% *} 39 sensor=${event#* } 40 sensor=${sensor% *} 41 42 if [ "${script}" != "sensor_indicator" ] ; then 43 echo "Event uses wrong script: ${script}" 44 elif [ "${device}" != "swsensor" ] ; then 45 echo "Event uses wrong device: ${device}" 46 elif [ "${sensor}" != "sensor" ] ; then 47 echo "Event uses wrong sensor: ${sensor}" 48 elif [ "${state}" != "$2" ] ; then 49 echo "Event uses wrong state: ${state}" 50 fi 51 } 52 53 # Start the rump server, then load the swsensor module with the 54 # requested properties 55 56 start_rump() { 57 rump_allserver -l rumpvfs -l rumpdev -l rumpdev_sysmon ${RUMP_SERVER} 58 if [ $( get_sensor_info | wc -l ) -ne 0 ] ; then 59 rump.modunload swsensor 60 rump.modload -f $1 swsensor 61 else 62 rump.modload $1 swsensor 63 fi 64 return $? 65 } 66 67 common_head() { 68 atf_set descr "$1" 69 atf_set timeout 120 70 atf_set require.progs rump.powerd rump.envstat rump.modload \ 71 rump.halt rump.sysctl rump_server \ 72 sed grep awk \ 73 rndctl expr 74 } 75 76 common_cleanup() { 77 rump.modunload swsensor 78 rump.halt 79 } 80 81 create_envsys_conf_files() { 82 cat << ENV0 > env0.conf 83 swsensor { 84 refresh-timeout = 2s; 85 } 86 ENV0 87 cat << ENV1 > env1.conf 88 swsensor { 89 sensor0 { critical-min = $(( $1 - $2 )); } 90 } 91 ENV1 92 cat << ENV2 > env2.conf 93 swsensor { 94 sensor0 { critical-min = $1; } 95 } 96 ENV2 97 } 98 99 # Test body common to all sensors 100 # $1 sensor mode 101 # $2 initial sensor value 102 # $3 initial limit 103 # $4 amount to lower limit 104 # $5 difference from limit to trigger event 105 # $6 sensor flags, for FHAS_ENTROPY and FMONNOTSUPP 106 107 common_body() { 108 # Start the rump-server process and load the module 109 modload_args="-i mode=$1 -i value=$2 -i limit=$3 ${6:+-i flags=$6}" 110 start_rump "$modload_args" 111 112 # create configuration files for updates 113 create_envsys_conf_files $3 $4 114 115 if [ $? -ne 0 ] ; then 116 atf_skip "Cannot set-up rump environment" 117 fi 118 119 # start powerd so we can detect sensor events 120 rump.powerd -n -d > powerd.log 2>&1 & 121 if [ -z "$(jobs)" ] ; then 122 skip_events=1 123 echo "Skipping event sub-tests - powerd did not start" 124 else 125 skip_events=0 126 expected_event=1 127 fi 128 129 # Step 0 - verify that sensor is registered 130 get_sensor_info | grep -q swsensor || 131 atf_fail "0: Device swsensor not registered" 132 133 # Step 1 - update the refresh-timeout and verify 134 # (use $(( ... )) since the timeout is displayed in hex!) 135 rump.envstat -c env0.conf 136 if [ $(( $( get_sensor_key refresh-timeout ) )) -ne 2 ] ; then 137 atf_fail "1: Could not set refresh-timeout to 2s" 138 fi 139 140 # Step 2 - verify that we can read sensor's value 141 if [ $1 -ne 0 -a $( get_sensor_key cur-value ) -ne $2 ] ; then 142 atf_fail "2: Value not available" 143 fi 144 145 # Step 3 - verify that changes in sensor value are seen 146 rump.sysctl -w hw.swsensor.cur_value=$(( $2 + 1 )) 147 if [ $( get_sensor_key cur-value ) -ne $(( $2 + 1 )) ] ; then 148 atf_fail "3: Value not updated" 149 fi 150 151 # Step 4 - if sensor provides hw limit, make sure we can read it 152 if [ $1 -ne 0 ] ; then 153 if [ $( get_sensor_key critical-min ) -ne $3 ] ; then 154 atf_fail "4: Limit not set by device" 155 fi 156 fi 157 158 # Step 5 - if sensor provides hw limit, make sure it works 159 if [ $1 -ne 0 -a ${skip_events} -eq 0 ] ; then 160 rump.sysctl -w hw.swsensor.cur_value=$(( $3 - $5 )) 161 sleep 5 162 cnt=$(get_powerd_event_count) 163 if [ ${cnt} -lt ${expected_event} ] ; then 164 atf_fail "5: No event triggered" 165 elif [ ${cnt} -gt ${expected_event} ] ; then 166 atf_fail "5: Multiple events triggered" 167 fi 168 evt=$( check_powerd_event ${cnt} "critical-under") 169 if [ -n "${evt}" ] ; then 170 atf_fail "5: ${evt}" 171 fi 172 expected_event=$(( 1 + ${expected_event} )) 173 fi 174 175 # Step 6 - verify that we return to normal state 176 if [ $1 -ne 0 -a ${skip_events} -eq 0 ] ; then 177 rump.sysctl -w hw.swsensor.cur_value=$(( $3 + $5 )) 178 sleep 5 179 cnt=$(get_powerd_event_count) 180 if [ ${cnt} -lt ${expected_event} ] ; then 181 atf_fail "6: No event triggered" 182 elif [ ${cnt} -gt ${expected_event} ] ; then 183 atf_fail "6: Multiple events triggered" 184 fi 185 evt=$( check_powerd_event ${cnt} "normal") 186 if [ -n "${evt}" ] ; then 187 atf_fail "6: ${evt}" 188 fi 189 expected_event=$(( 1 + ${expected_event} )) 190 fi 191 192 # Step 7 - verify that we can set our own limit 193 194 # Steps 7 thru 12 are skipped if the sensor cannot be monitored 195 if [ $( expr \( 0$6 / 2048 \) % 2 ) -ne 1 ] ; then 196 rump.envstat -c env1.conf 197 if [ $( get_sensor_key critical-min ) -ne $(( $3 - $4 )) ] ; then 198 atf_fail "7: Limit not set by envstat -c" 199 fi 200 201 # Step 8 - make sure user-set limit works 202 if [ ${skip_events} -eq 0 ] ; then 203 rump.sysctl -w hw.swsensor.cur_value=$(( $3 - $4 - $5 )) 204 sleep 5 205 cnt=$(get_powerd_event_count) 206 if [ ${cnt} -lt ${expected_event} ] ; then 207 atf_fail "8: No event triggered" 208 elif [ ${cnt} -gt ${expected_event} ] ; then 209 atf_fail "8: Multiple events triggered" 210 fi 211 evt=$( check_powerd_event ${cnt} "critical-under") 212 if [ -n "${evt}" ] ; then 213 atf_fail "8: ${evt}" 214 fi 215 expected_event=$(( 1 + ${expected_event} )) 216 fi 217 218 # Step 9 - verify that we return to normal state 219 if [ ${skip_events} -eq 0 ] ; then 220 rump.sysctl -w hw.swsensor.cur_value=$(( $3 - $4 + $5 )) 221 sleep 5 222 cnt=$(get_powerd_event_count) 223 if [ ${cnt} -lt ${expected_event} ] ; then 224 atf_fail "9: No event triggered" 225 elif [ ${cnt} -gt ${expected_event} ] ; then 226 atf_fail "9: Multiple events triggered" 227 fi 228 evt=$( check_powerd_event ${cnt} "normal") 229 if [ -n "${evt}" ] ; then 230 atf_fail "9: ${evt}" 231 fi 232 expected_event=$(( 1 + ${expected_event} )) 233 fi 234 235 # Step 10 - reset to defaults 236 rump.envstat -S 237 if [ $1 -eq 0 ] ; then 238 get_sensor_info | grep -q critical-min && 239 atf_fail "10: Failed to clear a limit with envstat -S" 240 else 241 if [ $( get_sensor_key critical-min ) -ne $3 ] ; then 242 atf_fail "10: Limit not reset to initial value" 243 fi 244 fi 245 246 # Step 11 - see if more events occur 247 if [ ${skip_events} -eq 0 ] ; then 248 rump.envstat -c env0.conf 249 rump.sysctl -w hw.swsensor.cur_value=$(( $3 - $4 - $5 )) 250 sleep 5 251 cnt=$(get_powerd_event_count) 252 if [ ${cnt} -ge ${expected_event} ] ; then 253 if [ $1 -ne 2 ] ; then 254 atf_fail "11b Event triggered after reset" 255 fi 256 evt=$( check_powerd_event ${cnt} "critical-under") 257 if [ -n "${evt}" ] ; then 258 atf_fail "11a: ${evt}" 259 fi 260 fi 261 fi 262 263 # Step 12 - make sure we can set new limits once more 264 rump.envstat -c env2.conf 265 if [ $( get_sensor_key critical-min ) -ne $3 ] ; then 266 atf_fail "12a: Limit not reset to same value" 267 fi 268 rump.envstat -c env1.conf 269 if [ $( get_sensor_key critical-min ) -ne $(( $3 - $4 )) ] ; then 270 atf_fail "12b: Limit not reset to new value" 271 fi 272 fi 273 274 # Step 13 - confirm registration (or lack thereof) with rndctl 275 rnd_bits=$( get_rnd_bits_count ) 276 if [ $( expr \( 0$6 / 8192 \) % 2 ) -eq 1 ] ; then 277 if [ -z "$rnd_bits" ] ; then 278 atf_fail "13a: Not registered with rndctl" 279 fi 280 else 281 if [ -n "$rnd_bits" ] ; then 282 atf_fail "13b: Wrongly registered with rndctl" 283 fi 284 fi 285 286 # Steps 14 and 15 are only if sensor is providing entropy 287 if [ $( expr \( 0$6 / 8192 \) % 2 ) -ne 1 ] ; then 288 return 289 fi 290 291 # Step 14 - make sure entropy collected when device is being polled 292 rump.envstat -c env0.conf 293 rump.sysctl -w hw.swsensor.cur_value=$3 294 sleep 5 295 rump.sysctl -w hw.swsensor.cur_value=$(( $3 + $4 )) 296 sleep 5 297 new_rnd_bits=$( get_rnd_bits_count ) 298 if [ $new_rnd_bits -le $rnd_bits ] ; then 299 atf_fail "14a: entropy bits did not increase after polling" 300 fi 301 rnd_bits=$new_rnd_bits 302 sleep 5 303 new_rnd_bits=$( get_rnd_bits_count ) 304 if [ $new_rnd_bits -gt $rnd_bits ] ; then 305 atf_fail "14b: entropy bits increased after poll with no value change" 306 fi 307 308 # Step 15 - make sure entropy collected when device is interrogated 309 rump.envstat -c env0.conf 310 rump.sysctl -w hw.swsensor.cur_value=$3 311 get_sensor_key cur-value 312 rnd_bits=$( get_rnd_bits_count ) 313 rump.sysctl -w hw.swsensor.cur_value=$(( $3 + $4 )) 314 get_sensor_key cur-value 315 new_rnd_bits=$( get_rnd_bits_count ) 316 if [ $new_rnd_bits -le $rnd_bits ] ; then 317 atf_fail "15a: entropy bits did not increase after interrogation" 318 fi 319 rnd_bits=$new_rnd_bits 320 get_sensor_key cur-value 321 new_rnd_bits=$( get_rnd_bits_count ) 322 if [ $new_rnd_bits -gt $rnd_bits ] ; then 323 atf_fail "15b: entropy bits increased after interrogation with no value change" 324 fi 325 } 326 327 atf_test_case simple_sensor cleanup 328 simple_sensor_head() { 329 common_head "Test a simple sensor" 330 } 331 332 simple_sensor_body() { 333 common_body 0 50 30 10 1 334 } 335 336 simple_sensor_cleanup() { 337 common_cleanup 338 } 339 340 atf_test_case limit_sensor cleanup 341 limit_sensor_head() { 342 common_head "Test a sensor with internal limit" 343 } 344 345 limit_sensor_body() { 346 common_body 1 45 25 8 2 347 } 348 349 limit_sensor_cleanup() { 350 common_cleanup 351 } 352 353 atf_test_case alarm_sensor cleanup 354 alarm_sensor_head() { 355 common_head "Test a sensor with internal checking" 356 } 357 358 alarm_sensor_body() { 359 common_body 2 40 20 6 3 360 } 361 362 alarm_sensor_cleanup() { 363 common_cleanup 364 } 365 366 atf_test_case entropy_polled_sensor cleanup 367 entropy_polled_sensor_head() { 368 common_head "Test a simple sensor that provides entropy" 369 } 370 371 entropy_polled_sensor_body() { 372 common_body 0 50 30 10 1 8192 373 } 374 375 entropy_polled_sensor_cleanup() { 376 common_cleanup 377 } 378 379 atf_test_case entropy_interrupt_sensor cleanup 380 entropy_interrupt_sensor_head() { 381 common_head "Test a sensor that provides entropy without polling" 382 } 383 384 entropy_interrupt_sensor_body() { 385 common_body 0 50 30 10 1 10240 386 } 387 388 entropy_interrupt_sensor_cleanup() { 389 common_cleanup 390 } 391 392 atf_init_test_cases() { 393 RUMP_SERVER="unix://t_swsensor_socket" ; export RUMP_SERVER 394 atf_add_test_case simple_sensor 395 atf_add_test_case limit_sensor 396 atf_add_test_case alarm_sensor 397 atf_add_test_case entropy_polled_sensor 398 atf_add_test_case entropy_interrupt_sensor 399 } 400
Indexes created Thu Sep 25 02:09:54 GMT 2025