Home | History | Annotate | Line # | Download | only in imx
      1 /* $NetBSD: imx23_pinctrl.c,v 1.10 2026/02/02 09:51:40 yurix Exp $ */
      2 
      3 /*
      4 * Copyright (c) 2013 The NetBSD Foundation, Inc.
      5 * All rights reserved.
      6 *
      7 * This code is derived from software contributed to The NetBSD Foundation
      8 * by Petri Laakso.
      9 *
     10 * Redistribution and use in source and binary forms, with or without
     11 * modification, are permitted provided that the following conditions
     12 * are met:
     13 * 1. Redistributions of source code must retain the above copyright
     14 *    notice, this list of conditions and the following disclaimer.
     15 * 2. Redistributions in binary form must reproduce the above copyright
     16 *    notice, this list of conditions and the following disclaimer in the
     17 *    documentation and/or other materials provided with the distribution.
     18 *
     19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     22 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     29 * POSSIBILITY OF SUCH DAMAGE.
     30 */
     31 
     32 #include <sys/param.h>
     33 #include <sys/types.h>
     34 #include <sys/bus.h>
     35 #include <sys/cdefs.h>
     36 #include <sys/device.h>
     37 #include <sys/errno.h>
     38 #include <sys/gpio.h>
     39 #include <sys/kmem.h>
     40 
     41 #include <dev/fdt/fdtvar.h>
     42 #include <dev/gpio/gpiovar.h>
     43 
     44 #include <arm/imx/imx23_pinctrlreg.h>
     45 #include <arm/imx/imx23var.h>
     46 
     47 #define IMX23_NUM_GPIO_PINS 96
     48 #define NUM_GPIO_BANKS 3
     49 
     50 struct imx23_pinctrl_softc {
     51 	device_t sc_dev;
     52 	bus_space_tag_t sc_iot;
     53 	bus_space_handle_t sc_hdl;
     54 	struct gpio_chipset_tag gc;
     55 	gpio_pin_t pins[IMX23_NUM_GPIO_PINS];
     56 	int bank_phandles[NUM_GPIO_BANKS];
     57 };
     58 
     59 struct imx23_pinctrl_fdt_pin {
     60 	int pin_nr;
     61 	bool pin_actlo;
     62 };
     63 
     64 static int	imx23_pinctrl_match(device_t, cfdata_t, void *);
     65 static void	imx23_pinctrl_attach(device_t, device_t, void *);
     66 
     67 static void     imx23_pinctrl_init(struct imx23_pinctrl_softc *);
     68 
     69 static	int	imx23_pinctrl_gp_gc_open(void *, device_t);
     70 static	void	imx23_pinctrl_gp_gc_close(void *, device_t);
     71 static	int	imx23_pinctrl_gp_pin_read(void *, int);
     72 static	void	imx23_pinctrl_gp_pin_write(void *, int, int);
     73 static	void	imx23_pinctrl_gp_pin_ctl(void *, int, int);
     74 
     75 static void 	*imx23_gpio_acquire(device_t, const void *, size_t, int);
     76 static void 	imx23_gpio_release(device_t, void *);
     77 static int 	imx23_gpio_read(device_t, void *, bool);
     78 static void 	imx23_gpio_write(device_t, void *, int, bool);
     79 
     80 static struct imx23_pinctrl_softc *_sc = NULL;
     81 
     82 CFATTACH_DECL_NEW(imx23pctl, sizeof(struct imx23_pinctrl_softc),
     83 		  imx23_pinctrl_match, imx23_pinctrl_attach, NULL, NULL);
     84 
     85 #define GPIO_PIN_CAP (GPIO_PIN_INPUT | GPIO_PIN_OUTPUT | GPIO_PIN_INOUT | \
     86 		GPIO_PIN_PULLUP | GPIO_PIN_SET)
     87 
     88 /*
     89  * Supported capabilities for each GPIO pin.
     90  */
     91 const static int pin_caps[IMX23_NUM_GPIO_PINS] = {
     92 	/*
     93 	 * HW_PINCTRL_MUXSEL0
     94 	 */
     95 	/* PIN 0 */
     96 	GPIO_PIN_CAP,
     97 	/* PIN 1 */
     98 	GPIO_PIN_CAP,
     99 	/* PIN 2 */
    100 	GPIO_PIN_CAP,
    101 	/* PIN 3 */
    102 	GPIO_PIN_CAP,
    103 	/* PIN 4 */
    104 	GPIO_PIN_CAP,
    105 	/* PIN 5 */
    106 	GPIO_PIN_CAP,
    107 	/* PIN 6 */
    108 	GPIO_PIN_CAP,
    109 	/* PIN 7 */
    110 	GPIO_PIN_CAP,
    111 	/* PIN 8 */
    112 	GPIO_PIN_CAP,
    113 	/* PIN 9 */
    114 	GPIO_PIN_CAP,
    115 	/* PIN 10 */
    116 	GPIO_PIN_CAP,
    117 	/* PIN 11 */
    118 	GPIO_PIN_CAP,
    119 	/* PIN 12 */
    120 	GPIO_PIN_CAP,
    121 	/* PIN 13 */
    122 	GPIO_PIN_CAP,
    123 	/* PIN 14 */
    124 	GPIO_PIN_CAP,
    125 	/* PIN 15 */
    126 	GPIO_PIN_CAP,
    127 	/*
    128 	 * HW_PINCTRL_MUXSEL1
    129 	 */
    130 	/* PIN 16 */
    131 	GPIO_PIN_CAP,
    132 	/* PIN 17 */
    133 	0,		/* Reserved for powering OLinuXino MAXI/MINI USB hub. */
    134 	/* PIN 18 */
    135 	GPIO_PIN_CAP,
    136 	/* PIN 19 */
    137 	GPIO_PIN_CAP,
    138 	/* PIN 20 */
    139 	GPIO_PIN_CAP,
    140 	/* PIN 21 */
    141 	GPIO_PIN_CAP,
    142 	/* PIN 22 */
    143 	GPIO_PIN_CAP,
    144 	/* PIN 23 */
    145 	GPIO_PIN_CAP,
    146 	/* PIN 24 */
    147 	GPIO_PIN_CAP,
    148 	/* PIN 25 */
    149 	GPIO_PIN_CAP,
    150 	/* PIN 26 */
    151 	GPIO_PIN_CAP,
    152 	/* PIN 27 */
    153 	GPIO_PIN_CAP,
    154 	/* PIN 28 */
    155 	GPIO_PIN_CAP,
    156 	/* PIN 29 */
    157 	GPIO_PIN_CAP,
    158 	/* PIN 30 */
    159 	GPIO_PIN_CAP,
    160 	/* PIN 31 */
    161 	GPIO_PIN_CAP,
    162 	/*
    163 	 * HW_PINCTRL_MUXSEL2
    164 	 */
    165 	/* PIN 32 */
    166 	GPIO_PIN_CAP,
    167 	/* PIN 33 */
    168 	GPIO_PIN_CAP,
    169 	/* PIN 34 */
    170 	GPIO_PIN_CAP,
    171 	/* PIN 35 */
    172 	GPIO_PIN_CAP,
    173 	/* PIN 36 */
    174 	GPIO_PIN_CAP,
    175 	/* PIN 37 */
    176 	GPIO_PIN_CAP,
    177 	/* PIN 38 */
    178 	GPIO_PIN_CAP,
    179 	/* PIN 39 */
    180 	GPIO_PIN_CAP,
    181 	/* PIN 40 */
    182 	GPIO_PIN_CAP,
    183 	/* PIN 41 */
    184 	GPIO_PIN_CAP,
    185 	/* PIN 42 */
    186 	GPIO_PIN_CAP,
    187 	/* PIN 43 */
    188 	GPIO_PIN_CAP,
    189 	/* PIN 44 */
    190 	GPIO_PIN_CAP,
    191 	/* PIN 45 */
    192 	GPIO_PIN_CAP,
    193 	/* PIN 46 */
    194 	GPIO_PIN_CAP,
    195 	/* PIN 47 */
    196 	GPIO_PIN_CAP,
    197 	/*
    198 	 * HW_PINCTRL_MUXSEL3
    199 	 */
    200 	/* PIN 48 */
    201 	GPIO_PIN_CAP,
    202 	/* PIN 49 */
    203 	GPIO_PIN_CAP,
    204 	/* PIN 50 */
    205 	GPIO_PIN_CAP,
    206 	/* PIN 51 */
    207 	GPIO_PIN_CAP,
    208 	/* PIN 52 */
    209 	GPIO_PIN_CAP,
    210 	/* PIN 53 */
    211 	GPIO_PIN_CAP,
    212 	/* PIN 54 */
    213 	GPIO_PIN_CAP,
    214 	/* PIN 55 */
    215 	GPIO_PIN_CAP,
    216 	/* PIN 56 */
    217 	GPIO_PIN_CAP,
    218 	/* PIN 57 */
    219 	GPIO_PIN_CAP,
    220 	/* PIN 58 */
    221 	GPIO_PIN_CAP,
    222 	/* PIN 59 */
    223 	GPIO_PIN_CAP,
    224 	/* PIN 60 */
    225 	GPIO_PIN_CAP,
    226 	/* PIN 61 */
    227 	GPIO_PIN_CAP,
    228 	/* PIN 62 */
    229 	GPIO_PIN_CAP,
    230 	/* PIN 63 */
    231 	0,		/* Reserved. */
    232 	/*
    233 	 * HW_PINCTRL_MUXSEL4
    234 	 */
    235 	/* PIN 64 */
    236 	GPIO_PIN_CAP,
    237 	/* PIN 65 */
    238 	GPIO_PIN_CAP,
    239 	/* PIN 66 */
    240 	GPIO_PIN_CAP,
    241 	/* PIN 67 */
    242 	GPIO_PIN_CAP,
    243 	/* PIN 68 */
    244 	GPIO_PIN_CAP,
    245 	/* PIN 69 */
    246 	GPIO_PIN_CAP,
    247 	/* PIN 70 */
    248 	GPIO_PIN_CAP,
    249 	/* PIN 71 */
    250 	GPIO_PIN_CAP,
    251 	/* PIN 72 */
    252 	GPIO_PIN_CAP,
    253 	/* PIN 73 */
    254 	0,		/* From this on reserved for EMI (DRAM) pins. */
    255 	/* PIN 74 */
    256 	0,
    257 	/* PIN 75 */
    258 	0,
    259 	/* PIN 76 */
    260 	0,
    261 	/* PIN 77 */
    262 	0,
    263 	/* PIN 78 */
    264 	0,
    265 	/* PIN 79 */
    266 	0,
    267 	/*
    268 	 * HW_PINCTRL_MUXSEL5
    269 	 */
    270 	/* PIN 80 */
    271 	0,
    272 	/* PIN 81 */
    273 	0,
    274 	/* PIN 82 */
    275 	0,
    276 	/* PIN 83 */
    277 	0,
    278 	/* PIN 84 */
    279 	0,
    280 	/* PIN 85 */
    281 	0,
    282 	/* PIN 86 */
    283 	0,
    284 	/* PIN 87 */
    285 	0,
    286 	/* PIN 88 */
    287 	0,
    288 	/* PIN 89 */
    289 	0,
    290 	/* PIN 90 */
    291 	0,
    292 	/* PIN 91 */
    293 	0,
    294 	/* PIN 92 */
    295 	0,
    296 	/* PIN 93 */
    297 	0,
    298 	/* PIN 94 */
    299 	0,
    300 	/* PIN 95 */
    301 	0
    302 };
    303 
    304 #define PINCTRL_RD(sc, reg)						\
    305 	bus_space_read_4(sc->sc_iot, sc->sc_hdl, (reg))
    306 #define PINCTRL_WR(sc, reg, val)					\
    307 	bus_space_write_4(sc->sc_iot, sc->sc_hdl, (reg), (val))
    308 
    309 /*
    310  * Macros to map pin numbers to registers and bit fields.
    311  */
    312 #define MUXSEL_REG_SIZE	0x10
    313 #define PIN2MUXSEL_REG(pin)						\
    314 	((pin / 16) * MUXSEL_REG_SIZE + HW_PINCTRL_MUXSEL0)
    315 #define PIN2MUXSEL_SET_REG(pin)						\
    316 	((pin / 16) * MUXSEL_REG_SIZE + HW_PINCTRL_MUXSEL0_SET)
    317 #define PIN2MUXSEL_CLR_REG(pin)						\
    318 	((pin / 16) * MUXSEL_REG_SIZE + HW_PINCTRL_MUXSEL0_CLR)
    319 #define PIN2MUXSEL_MASK(pin)	(3<<(pin % 16 * 2))
    320 
    321 #define DRIVE_REG_SIZE	0x10
    322 #define PIN2DRIVE_REG(pin)						\
    323 	((pin / 8) * DRIVE_REG_SIZE + HW_PINCTRL_DRIVE0)
    324 #define PIN2DRIVE_SET_REG(pin)						\
    325 	((pin / 8) * DRIVE_REG_SIZE + HW_PINCTRL_DRIVE0_SET)
    326 #define PIN2DRIVE_CLR_REG(pin)						\
    327 	((pin / 8) * DRIVE_REG_SIZE + HW_PINCTRL_DRIVE0_CLR)
    328 #define PIN2DRIVE_MASK(pin)	(3<<(pin % 8 * 4))
    329 
    330 #define PULL_REG_SIZE	0x10
    331 #define PIN2PULL_REG(pin)						\
    332 	((pin / 32) * PULL_REG_SIZE + HW_PINCTRL_PULL0)
    333 #define PIN2PULL_SET_REG(pin)						\
    334 	((pin / 32) * PULL_REG_SIZE + HW_PINCTRL_PULL0_SET)
    335 #define PIN2PULL_CLR_REG(pin)						\
    336 	((pin / 32) * PULL_REG_SIZE + HW_PINCTRL_PULL0_CLR)
    337 #define PIN2PULL_MASK(pin)	(1<<(pin % 32))
    338 
    339 #define DOUT_REG_SIZE	0x10
    340 #define PIN2DOUT_REG(pin)						\
    341 	((pin / 32) * DOUT_REG_SIZE + HW_PINCTRL_DOUT0)
    342 #define PIN2DOUT_SET_REG(pin)						\
    343 	((pin / 32) * DOUT_REG_SIZE + HW_PINCTRL_DOUT0_SET)
    344 #define PIN2DOUT_CLR_REG(pin)						\
    345 	((pin / 32) * DOUT_REG_SIZE + HW_PINCTRL_DOUT0_CLR)
    346 #define PIN2DOUT_MASK(pin)	(1<<(pin % 32))
    347 
    348 #define DIN_REG_SIZE	0x10
    349 #define PIN2DIN_REG(pin)	((pin / 32) * DIN_REG_SIZE + HW_PINCTRL_DIN0)
    350 #define PIN2DIN_MASK(pin)	(1<<(pin % 32))
    351 
    352 #define DOE_REG_SIZE	0x10
    353 #define PIN2DOE_REG(pin)						\
    354 	((pin / 32) * DOE_REG_SIZE + HW_PINCTRL_DOE0)
    355 #define PIN2DOE_SET_REG(pin)						\
    356 	((pin / 32) * DOE_REG_SIZE + HW_PINCTRL_DOE0_SET)
    357 #define PIN2DOE_CLR_REG(pin)						\
    358 	((pin / 32) * DOE_REG_SIZE + HW_PINCTRL_DOE0_CLR)
    359 #define PIN2DOE_MASK(pin)	(1<<(pin % 32))
    360 
    361 #define DRIVE_STRENGTH_4MA	0
    362 #define DRIVE_STRENGTH_8MA	1
    363 #define DRIVE_STRENGTH_12MA	2
    364 
    365 #define MUXEL_GPIO_MODE	3
    366 
    367 #define PINCTRL_SOFT_RST_LOOP 455 /* At least 1 us ... */
    368 
    369 static const struct device_compatible_entry compat_data[] = {
    370 	{ .compat = "fsl,imx23-pinctrl" },
    371 	DEVICE_COMPAT_EOL
    372 };
    373 
    374 static const struct device_compatible_entry child_compat_data[] = {
    375 	{ .compat = "fsl,imx23-gpio" },
    376 	DEVICE_COMPAT_EOL
    377 };
    378 
    379 static struct fdtbus_gpio_controller_func imx23_gpio_funcs = {
    380 	.acquire = imx23_gpio_acquire,
    381 	.release = imx23_gpio_release,
    382 	.read = imx23_gpio_read,
    383 	.write = imx23_gpio_write
    384 };
    385 
    386 static void *
    387 imx23_gpio_acquire(device_t dev, const void *data, size_t len, int flags) {
    388 	struct imx23_pinctrl_softc * const sc = device_private(dev);
    389 	struct imx23_pinctrl_fdt_pin *pin;
    390 	const uint32_t *gpio = data;
    391 
    392 	if (len != 12) return NULL;
    393 
    394 	const int bank_phandle =
    395 	    fdtbus_get_phandle_from_native(be32toh(gpio[0]));
    396 	int pin_nr_offset = 0;
    397 	for (int i=0;i<NUM_GPIO_BANKS;i++) {
    398 		if (sc->bank_phandles[i] == bank_phandle) {
    399 			pin_nr_offset = 32*i;
    400 			break;
    401 		}
    402 	}
    403 
    404 	const int pin_nr = pin_nr_offset + be32toh(gpio[1]);
    405 	const bool actlo = be32toh(gpio[2]) & 1;
    406 
    407 	pin = kmem_zalloc(sizeof(struct imx23_pinctrl_fdt_pin), KM_SLEEP);
    408 	pin->pin_nr = pin_nr;
    409 	pin->pin_actlo = actlo;
    410 
    411 	gpiobus_pin_ctl(&sc->gc, pin->pin_nr, flags);
    412 
    413 	return pin;
    414 }
    415 
    416 static void
    417 imx23_gpio_release(device_t dev, void *priv)
    418 {
    419 	struct imx23_pinctrl_softc * const sc = device_private(dev);
    420 	struct imx23_pinctrl_fdt_pin *pin = priv;
    421 
    422 	gpiobus_pin_ctl(&sc->gc, pin->pin_nr, GPIO_PIN_INPUT);
    423 
    424 	kmem_free(pin, sizeof(*pin));
    425 }
    426 
    427 static int
    428 imx23_gpio_read(device_t dev, void *priv, bool raw)
    429 {
    430 	struct imx23_pinctrl_softc * const sc = device_private(dev);
    431 	struct imx23_pinctrl_fdt_pin *pin = priv;
    432 	int val;
    433 
    434 	val = gpiobus_pin_read(&sc->gc, pin->pin_nr);
    435 
    436 	if (!raw && pin->pin_actlo)
    437 		val = !val;
    438 
    439 	return val;
    440 }
    441 
    442 static void
    443 imx23_gpio_write(device_t dev, void *priv, int val, bool raw)
    444 {
    445 	struct imx23_pinctrl_softc * const sc = device_private(dev);
    446 	struct imx23_pinctrl_fdt_pin *pin = priv;
    447 
    448 	if (!raw && pin->pin_actlo)
    449 		val = !val;
    450 
    451 	gpiobus_pin_write(&sc->gc, pin->pin_nr, val);
    452 }
    453 
    454 static int
    455 imx23_pinctrl_match(device_t parent, cfdata_t match, void *aux)
    456 {
    457 	struct fdt_attach_args * const faa = aux;
    458 
    459 	return of_compatible_match(faa->faa_phandle, compat_data);
    460 }
    461 
    462 static void
    463 imx23_pinctrl_attach(device_t parent, device_t self, void *aux)
    464 {
    465 	struct imx23_pinctrl_softc *const sc = device_private(self);
    466 	struct fdt_attach_args *const faa = aux;
    467 	const int phandle = faa->faa_phandle;
    468 
    469 	sc->sc_dev = self;
    470 	sc->sc_iot = faa->faa_bst;
    471 
    472 	bus_addr_t addr;
    473 	bus_size_t size;
    474 	if (fdtbus_get_reg(phandle, 0, &addr, &size) != 0) {
    475 		aprint_error(": couldn't get register address\n");
    476 		return;
    477 	}
    478 	if (bus_space_map(faa->faa_bst, addr, size, 0, &sc->sc_hdl)) {
    479 		aprint_error(": couldn't map registers\n");
    480 		return;
    481 	}
    482 
    483 	imx23_pinctrl_init(sc);
    484 
    485 	aprint_normal(": PIN MUX & GPIO\n");
    486 
    487 	/* Set pin capabilities. */
    488 	for (int i = 0; i < IMX23_NUM_GPIO_PINS; i++) {
    489 		sc->pins[i].pin_caps = pin_caps[i];
    490 	}
    491 
    492 	sc->gc.gp_cookie = sc;
    493 	sc->gc.gp_gc_open = imx23_pinctrl_gp_gc_open;
    494 	sc->gc.gp_gc_close = imx23_pinctrl_gp_gc_close;
    495 	sc->gc.gp_pin_read = imx23_pinctrl_gp_pin_read;
    496 	sc->gc.gp_pin_write = imx23_pinctrl_gp_pin_write;
    497 	sc->gc.gp_pin_ctl = imx23_pinctrl_gp_pin_ctl;
    498 
    499 	struct gpiobus_attach_args gpiobus_aa;
    500 	gpiobus_aa.gba_gc = &sc->gc;
    501 	gpiobus_aa.gba_npins = IMX23_NUM_GPIO_PINS;
    502 	gpiobus_aa.gba_pins = sc->pins;
    503 
    504 	config_found(sc->sc_dev, &gpiobus_aa, gpiobus_print, CFARGS_NONE);
    505 
    506 	/* configure fdt gpio system */
    507 	for (int i=0;i<NUM_GPIO_BANKS;i++) {
    508 		sc->bank_phandles[i] = 0;
    509 	}
    510 	/* add gpio banks  */
    511 	for (int child = OF_child(phandle); child; child = OF_peer(child)) {
    512 		if (!of_compatible_match(child, child_compat_data))
    513 			continue;
    514 
    515 		bus_addr_t gpio_instance;
    516 		if (fdtbus_get_reg(child, 0, &gpio_instance, NULL) != 0) {
    517 			aprint_error(": couldn't get register address\n");
    518 			return;
    519 		}
    520 
    521 		if (gpio_instance >= NUM_GPIO_BANKS){
    522 			aprint_error(": bank %ld out of range", gpio_instance);
    523 			continue;
    524 		}
    525 		sc->bank_phandles[gpio_instance] = child;
    526 
    527 		fdtbus_register_gpio_controller(self, child, &imx23_gpio_funcs);
    528 	}
    529 }
    530 
    531 static void
    532 imx23_pinctrl_init(struct imx23_pinctrl_softc *sc)
    533 {
    534 	_sc = sc;
    535 }
    536 
    537 static	int
    538 imx23_pinctrl_gp_gc_open(void *cookie, device_t dev)
    539 {
    540 	return 0;
    541 }
    542 
    543 static	void
    544 imx23_pinctrl_gp_gc_close(void *cookie, device_t dev)
    545 {
    546     /* do nothing */
    547 }
    548 
    549 static	int
    550 imx23_pinctrl_gp_pin_read(void *cookie, int pin)
    551 {
    552 	int value;
    553 	struct imx23_pinctrl_softc *sc = (struct imx23_pinctrl_softc *) cookie;
    554 
    555 	if (PINCTRL_RD(sc, PIN2DIN_REG(pin)) & PIN2DIN_MASK(pin))
    556 		value = 1;
    557 	else
    558 		value = 0;
    559 
    560 	return value;
    561 }
    562 
    563 static	void
    564 imx23_pinctrl_gp_pin_write(void *cookie, int pin, int value)
    565 {
    566 	struct imx23_pinctrl_softc *sc = (struct imx23_pinctrl_softc *) cookie;
    567 
    568 	if (value)
    569 		PINCTRL_WR(sc, PIN2DOUT_SET_REG(pin), PIN2DOUT_MASK(pin));
    570 	else
    571 		PINCTRL_WR(sc, PIN2DOUT_CLR_REG(pin), PIN2DOUT_MASK(pin));
    572 }
    573 
    574 /*
    575  * Configure pin as requested in flags.
    576  */
    577 static	void
    578 imx23_pinctrl_gp_pin_ctl(void *cookie, int pin, int flags)
    579 {
    580 	struct imx23_pinctrl_softc *sc = (struct imx23_pinctrl_softc *) cookie;
    581 	uint32_t tmpr;
    582 
    583 	/* Enable GPIO pin. */
    584 	tmpr = PINCTRL_RD(sc, PIN2MUXSEL_REG(pin));
    585 	tmpr &= ~PIN2MUXSEL_MASK(pin);
    586 	tmpr |= __SHIFTIN(MUXEL_GPIO_MODE, PIN2MUXSEL_MASK(pin));
    587 	PINCTRL_WR(sc, PIN2MUXSEL_REG(pin), tmpr);
    588 
    589 	/* Configure pin drive strength. */
    590 	tmpr = PINCTRL_RD(sc, PIN2DRIVE_REG(pin));
    591 	tmpr &= ~PIN2DRIVE_MASK(pin);
    592 	tmpr |= __SHIFTIN(DRIVE_STRENGTH_4MA, PIN2DRIVE_MASK(pin));
    593 	PINCTRL_WR(sc, PIN2DRIVE_REG(pin), tmpr);
    594 
    595 	if ((flags & (GPIO_PIN_OUTPUT | GPIO_PIN_INOUT))) {
    596 		/* Configure pullup resistor or gate keeper. */
    597 		if (flags & GPIO_PIN_PULLUP)
    598 			PINCTRL_WR(sc, PIN2PULL_SET_REG(pin),
    599 				PIN2PULL_MASK(pin));
    600 		else
    601 			PINCTRL_WR(sc, PIN2PULL_CLR_REG(pin),
    602 				PIN2PULL_MASK(pin));
    603 
    604 		/* Set initial pin value to logic zero. */
    605 		PINCTRL_WR(sc, PIN2DOUT_CLR_REG(pin), PIN2DOUT_MASK(pin));
    606 
    607 		/* Enable pin output. */
    608 		PINCTRL_WR(sc, PIN2DOE_SET_REG(pin), PIN2DOE_MASK(pin));
    609 	}
    610 
    611 	if (flags & GPIO_PIN_INPUT) {
    612 		/* Disable pin output. */
    613 		PINCTRL_WR(sc, PIN2DOE_CLR_REG(pin), PIN2DOE_MASK(pin));
    614 
    615 		/* Configure pullup resistor or gate keeper. */
    616 		if (flags & GPIO_PIN_PULLUP)
    617 			PINCTRL_WR(sc, PIN2PULL_SET_REG(pin),
    618 				PIN2PULL_MASK(pin));
    619 		else
    620 			PINCTRL_WR(sc, PIN2PULL_CLR_REG(pin),
    621 				PIN2PULL_MASK(pin));
    622 	}
    623 }
    624