1 /* $NetBSD: bhareg.h,v 1.21 2017/02/26 23:30:14 jdolecek Exp $ */ 2 3 /*- 4 * Copyright (c) 1997, 1998 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Charles M. Hannum and by Jason R. Thorpe of the Numerical Aerospace 9 * Simulation Facility, NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 /* 34 * Originally written by Julian Elischer (julian (at) tfs.com) 35 * for TRW Financial Systems for use under the MACH(2.5) operating system. 36 * 37 * TRW Financial Systems, in accordance with their agreement with Carnegie 38 * Mellon University, makes this software available to CMU to distribute 39 * or use in any manner that they see fit as long as this message is kept with 40 * the software. For this reason TFS also grants any other persons or 41 * organisations permission to use or modify this software. 42 * 43 * TFS supplies this software to be publicly redistributed 44 * on the understanding that TFS is not responsible for the correct 45 * functioning of this software in any circumstances. 46 */ 47 48 typedef u_int8_t physaddr[4]; 49 typedef u_int8_t physlen[4]; 50 #define ltophys _lto4l 51 #define phystol _4ltol 52 53 /* 54 * I/O port offsets 55 */ 56 #define BHA_CTRL_PORT 0 /* control (wo) */ 57 #define BHA_STAT_PORT 0 /* status (ro) */ 58 #define BHA_CMD_PORT 1 /* command (wo) */ 59 #define BHA_DATA_PORT 1 /* data (ro) */ 60 #define BHA_INTR_PORT 2 /* interrupt status (ro) */ 61 #define BHA_EXTGEOM_PORT 3 /* extended geometry (ro) */ 62 63 /* 64 * BHA_CTRL bits 65 */ 66 #define BHA_CTRL_HRST 0x80 /* Hardware reset */ 67 #define BHA_CTRL_SRST 0x40 /* Software reset */ 68 #define BHA_CTRL_IRST 0x20 /* Interrupt reset */ 69 #define BHA_CTRL_SCRST 0x10 /* SCSI bus reset */ 70 71 /* 72 * BHA_STAT bits 73 */ 74 #define BHA_STAT_STST 0x80 /* Self test in Progress */ 75 #define BHA_STAT_DIAGF 0x40 /* Diagnostic Failure */ 76 #define BHA_STAT_INIT 0x20 /* Mbx Init required */ 77 #define BHA_STAT_IDLE 0x10 /* Host Adapter Idle */ 78 #define BHA_STAT_CDF 0x08 /* cmd/data out port full */ 79 #define BHA_STAT_DF 0x04 /* Data in port full */ 80 #define BHA_STAT_INVDCMD 0x01 /* Invalid command */ 81 82 /* 83 * BHA_CMD opcodes 84 */ 85 #define BHA_NOP 0x00 /* No operation */ 86 #define BHA_MBX_INIT 0x01 /* Mbx initialization */ 87 #define BHA_START_SCSI 0x02 /* start scsi command */ 88 #define BHA_EXECUTE_BIOS_CMD 0x03 /* execute BIOS command */ 89 #define BHA_INQUIRE_REVISION 0x04 /* Adapter Inquiry */ 90 #define BHA_MBO_INTR_EN 0x05 /* Enable MBO available interrupt */ 91 #define BHA_SEL_TIMEOUT_SET 0x06 /* set selection time-out */ 92 #define BHA_BUS_ON_TIME_SET 0x07 /* set bus-on time */ 93 #define BHA_BUS_OFF_TIME_SET 0x08 /* set bus-off time */ 94 #define BHA_BUS_SPEED_SET 0x09 /* set bus transfer speed */ 95 #define BHA_INQUIRE_DEVICES 0x0a /* return installed devices 0-7 */ 96 #define BHA_INQUIRE_CONFIG 0x0b /* return configuration data */ 97 #define BHA_TARGET_EN 0x0c /* enable target mode */ 98 #define BHA_INQUIRE_SETUP 0x0d /* return setup data */ 99 #define BHA_WRITE_LRAM 0x1a /* write adapter local RAM */ 100 #define BHA_READ_LRAM 0x1b /* read adapter local RAM */ 101 #define BHA_WRITE_CHIP_FIFO 0x1c /* write bus master chip FIFO */ 102 #define BHA_READ_CHIP_FIFO 0x1d /* read bus master chip FIFO */ 103 #define BHA_ECHO 0x1f /* Echo command byte */ 104 #define BHA_ADAPTER_DIAGNOSTICS 0x20 /* host adapter diagnostics */ 105 #define BHA_SET_ADAPTER_OPTIONS 0x21 /* set adapter options */ 106 #define BHA_INQUIRE_DEVICES_2 0x23 /* return installed devices 8-15 */ 107 #define BHA_INQUIRE_TARG_DEVS 0x24 /* inquire target devices */ 108 #define BHA_DISABLE_HAC_INTR 0x25 /* disable host adapter interrupt */ 109 #define BHA_MBX_INIT_EXTENDED 0x81 /* Mbx initialization */ 110 #define BHA_EXECUTE_SCSI_CMD 0x83 /* execute SCSI command */ 111 #define BHA_INQUIRE_REVISION_3 0x84 /* Get 3rd firmware version byte */ 112 #define BHA_INQUIRE_REVISION_4 0x85 /* Get 4th firmware version byte */ 113 #define BHA_INQUIRE_PCI_INFO 0x86 /* get PCI host adapter information */ 114 #define BHA_INQUIRE_MODEL 0x8b /* Get hardware ID and revision */ 115 #define BHA_INQUIRE_PERIOD 0x8c /* Get synchronous period */ 116 #define BHA_INQUIRE_EXTENDED 0x8d /* Adapter Setup Inquiry */ 117 #define BHA_ROUND_ROBIN 0x8f /* Enable/Disable(default) 118 round robin */ 119 #define BHA_STORE_LRAM 0x90 /* store host adapter local RAM */ 120 #define BHA_FETCH_LRAM 0x91 /* fetch host adapter local RAM */ 121 #define BHA_SAVE_TO_EEPROM 0x92 /* store local RAM data in EEPROM */ 122 #define BHA_UPLOAD_AUTOSCSI 0x94 /* upload AutoSCSI code */ 123 #define BHA_MODIFY_IOPORT 0x95 /* change or disable I/O port */ 124 #define BHA_SET_CCB_FORMAT 0x96 /* set CCB format (legacy/wide lun) */ 125 #define BHA_WRITE_INQUIRY_BUF 0x9a /* write inquiry buffer */ 126 #define BHA_READ_INQUIRY_BUF 0x9b /* read inquiry buffer */ 127 #define BHA_FLASH_UP_DOWNLOAD 0xa7 /* flash upload/downlod */ 128 #define BHA_READ_SCAM_DATA 0xa8 /* read SCAM data */ 129 #define BHA_WRITE_SCAM_DATA 0xa9 /* write SCAM data */ 130 131 /* 132 * BHA_INTR bits 133 */ 134 #define BHA_INTR_ANYINTR 0x80 /* Any interrupt */ 135 #define BHA_INTR_SCRD 0x08 /* SCSI reset detected */ 136 #define BHA_INTR_HACC 0x04 /* Command complete */ 137 #define BHA_INTR_MBOA 0x02 /* MBX out empty */ 138 #define BHA_INTR_MBIF 0x01 /* MBX in full */ 139 140 struct bha_mbx_out { 141 physaddr ccb_addr; 142 u_int8_t reserved[3]; 143 u_int8_t cmd; 144 }; 145 146 struct bha_mbx_in { 147 physaddr ccb_addr; 148 u_int8_t host_stat; 149 u_int8_t target_stat; 150 u_int8_t reserved; 151 u_int8_t comp_stat; 152 }; 153 154 /* 155 * mbo.cmd values 156 */ 157 #define BHA_MBO_FREE 0x0 /* MBO entry is free */ 158 #define BHA_MBO_START 0x1 /* MBO activate entry */ 159 #define BHA_MBO_ABORT 0x2 /* MBO abort entry */ 160 161 /* 162 * mbi.comp_stat values 163 */ 164 #define BHA_MBI_FREE 0x0 /* MBI entry is free */ 165 #define BHA_MBI_OK 0x1 /* completed without error */ 166 #define BHA_MBI_ABORT 0x2 /* aborted ccb */ 167 #define BHA_MBI_UNKNOWN 0x3 /* Tried to abort invalid CCB */ 168 #define BHA_MBI_ERROR 0x4 /* Completed with error */ 169 #define BHA_MBI_BADCCB 0x5 /* invalid CCB */ 170 171 #if defined(BIG_DMA) 172 WARNING...THIS WON'T WORK(won't fit on 1 page) 173 #if 0 174 #define BHA_NSEG 2048 /* Number of scatter gather segments - to much vm */ 175 #endif 176 #define BHA_NSEG 128 177 #else 178 #define BHA_NSEG 33 179 #endif /* BIG_DMA */ 180 181 struct bha_scat_gath { 182 physlen seg_len; 183 physaddr seg_addr; 184 }; 185 186 struct bha_ccb { 187 u_int8_t opcode; 188 #if BYTE_ORDER == LITTLE_ENDIAN 189 u_int8_t :3, 190 data_in :1, 191 data_out :1, 192 wide_tag_enable :1, /* Wide Lun CCB format */ 193 wide_tag_type :2; /* Wide Lun CCB format */ 194 #else 195 u_int8_t wide_tag_type :2, /* Wide Lun CCB format */ 196 wide_tag_enable :1, /* Wide Lun CCB format */ 197 data_out :1, 198 data_in :1, 199 :3; 200 #endif 201 u_int8_t scsi_cmd_length; 202 u_int8_t req_sense_length; 203 /*------------------------------------longword boundary */ 204 physlen data_length; 205 /*------------------------------------longword boundary */ 206 physaddr data_addr; 207 /*------------------------------------longword boundary */ 208 u_int8_t reserved1[2]; 209 u_int8_t host_stat; 210 u_int8_t target_stat; 211 /*------------------------------------longword boundary */ 212 u_int8_t target; 213 #if BYTE_ORDER == LITTLE_ENDIAN 214 u_int8_t lun :5, 215 tag_enable :1, 216 tag_type :2; 217 #else 218 u_int8_t tag_type :2, 219 tag_enable :1, 220 lun :5; 221 #endif 222 u_int8_t scsi_cmd[12]; 223 u_int8_t reserved2[1]; 224 u_int8_t link_id; 225 /*------------------------------------longword boundary */ 226 physaddr link_addr; 227 /*------------------------------------longword boundary */ 228 physaddr sense_ptr; 229 /*-----end of HW fields-----------------------longword boundary */ 230 struct scsi_sense_data scsi_sense; 231 /*------------------------------------longword boundary */ 232 struct bha_scat_gath scat_gath[BHA_NSEG]; 233 /*------------------------------------longword boundary */ 234 TAILQ_ENTRY(bha_ccb) chain; 235 struct bha_ccb *nexthash; 236 bus_addr_t hashkey; 237 238 struct scsipi_xfer *xs; /* the scsipi_xfer for this cmd */ 239 240 int flags; 241 #define CCB_ALLOC 0x01 242 #define CCB_ABORT 0x02 243 #ifdef BHADIAG 244 #define CCB_SENDING 0x04 245 #endif 246 int timeout; 247 248 /* 249 * This DMA map maps the buffer involved in the transfer. 250 * Its contents are loaded into "scat_gath" above. 251 */ 252 bus_dmamap_t dmamap_xfer; 253 }; 254 255 /* 256 * opcode fields 257 */ 258 #define BHA_INITIATOR_CCB 0x00 /* SCSI Initiator CCB */ 259 #define BHA_TARGET_CCB 0x01 /* SCSI Target CCB */ 260 #define BHA_INIT_SCAT_GATH_CCB 0x02 /* SCSI Initiator with S/G */ 261 #define BHA_INIT_RESID_CCB 0x03 /* SCSI Initiator w/ residual */ 262 #define BHA_INIT_RESID_SG_CCB 0x04 /* SCSI Initiator w/ residual and S/G */ 263 #define BHA_RESET_CCB 0x81 /* SCSI Bus reset */ 264 265 /* 266 * bha_ccb.host_stat values 267 */ 268 #define BHA_OK 0x00 /* cmd ok */ 269 #define BHA_LINK_OK 0x0a /* Link cmd ok */ 270 #define BHA_LINK_IT 0x0b /* Link cmd ok + int */ 271 #define BHA_DATA_UNDRN 0x0c /* data underrun error */ 272 #define BHA_SEL_TIMEOUT 0x11 /* Selection time out */ 273 #define BHA_OVER_UNDER 0x12 /* Data over/under run */ 274 #define BHA_BUS_FREE 0x13 /* Bus dropped at unexpected time */ 275 #define BHA_INV_BUS 0x14 /* Invalid bus phase/sequence */ 276 #define BHA_BAD_MBO 0x15 /* Incorrect MBO cmd */ 277 #define BHA_BAD_CCB 0x16 /* Incorrect ccb opcode */ 278 #define BHA_BAD_LINK 0x17 /* Not same values of LUN for links */ 279 #define BHA_INV_TARGET 0x18 /* Invalid target direction */ 280 #define BHA_CCB_DUP 0x19 /* Duplicate CCB received */ 281 #define BHA_INV_CCB 0x1a /* Invalid CCB or segment list */ 282 #define BHA_AUTOSENSE_FAILED 0x1b /* auto REQUEST SENSE failed */ 283 #define BHA_TAGGED_MSG_REJ 0x1c /* tagged queueing message rejected */ 284 #define BHA_UNSUP_MSG_RECVD 0x1d /* unsupported message received */ 285 #define BHA_HARDWARE_FAILURE 0x20 /* host adapter hardware failure */ 286 #define BHA_TARG_IGNORED_ATN 0x21 /* target ignored ATN signal */ 287 #define BHA_HA_SCSI_BUS_RESET 0x22 /* host adapter asserted RST */ 288 #define BHA_OTHER_SCSI_BUS_RESET 0x23 /* other device asserted RST */ 289 #define BHA_BAD_RECONNECT 0x24 /* target reconnected improperly */ 290 #define BHA_HA_BUS_DEVICE_RESET 0x25 /* host adapter performed BDR */ 291 #define BHA_ABORT_QUEUE 0x26 /* abort queue generated */ 292 #define BHA_SOFTWARE_FAILURE 0x27 /* host adapter software failure */ 293 #define BHA_HARDWARE_WATCHDOG 0x30 /* host adapter watchdog timer fired */ 294 #define BHA_SCSI_PARITY_ERROR 0x34 /* SCSI parity error detected */ 295 296 struct bha_extended_inquire { 297 struct { 298 u_char opcode; 299 u_char len; 300 } cmd; 301 struct { 302 u_char bus_type; /* Type of bus connected to */ 303 #define BHA_BUS_TYPE_24BIT 'A' /* ISA bus */ 304 #define BHA_BUS_TYPE_32BIT 'E' /* EISA/VLB/PCI bus */ 305 #define BHA_BUS_TYPE_MCA 'M' /* MicroChannel bus */ 306 u_char bios_address; /* Address of adapter BIOS */ 307 u_short sg_limit; 308 u_char mbox_count; 309 u_char mbox_baseaddr[4]; /* packed/unaligned u_int32_t */ 310 u_char intrflags; 311 #define BHA_INTR_FASTEISA 0x04 312 #define BHA_INTR_LEVEL 0x40 /* bit 6: level-sensitive interrupt */ 313 u_char firmware_level[3]; /* last 3 digits of firmware rev */ 314 u_char scsi_flags; /* supported SCSI features */ 315 #define BHA_SCSI_WIDE 0x01 /* host adapter is wide */ 316 #define BHA_SCSI_DIFFERENTIAL 0x02 /* host adapter is differential */ 317 #define BHA_SCSI_SCAM 0x04 /* host adapter supports SCAM */ 318 #define BHA_SCSI_ULTRA 0x08 /* host adapter supports Ultra */ 319 #define BHA_SCSI_TERMINATION 0x10 /* host adapter supports smart 320 termination */ 321 } reply; 322 }; 323 324 struct bha_config { 325 struct { 326 u_char opcode; 327 } cmd; 328 struct { 329 u_char chan; 330 u_char intr; 331 #if BYTE_ORDER == LITTLE_ENDIAN 332 u_char scsi_dev :3, 333 :5; 334 #else 335 u_char :5, 336 scsi_dev :3; 337 #endif 338 } reply; 339 }; 340 341 struct bha_toggle { 342 struct { 343 u_char opcode; 344 u_char enable; 345 } cmd; 346 }; 347 348 struct bha_mailbox { 349 struct { 350 u_char opcode; 351 u_char nmbx; 352 physaddr addr; 353 } cmd; 354 }; 355 356 struct bha_model { 357 struct { 358 u_char opcode; 359 u_char len; 360 } cmd; 361 struct { 362 u_char id[4]; /* i.e bt742a -> '7','4','2','A' */ 363 u_char version[2]; /* i.e Board Revision 'H' -> 'H', 0x00 */ 364 } reply; 365 }; 366 367 struct bha_revision { 368 struct { 369 u_char opcode; 370 } cmd; 371 struct { 372 u_char board_type; 373 u_char custom_feature; 374 char firm_revision; 375 u_char firm_version; 376 } reply; 377 }; 378 379 struct bha_digit { 380 struct { 381 u_char opcode; 382 } cmd; 383 struct { 384 u_char digit; 385 } reply; 386 }; 387 388 struct bha_devices { 389 struct { 390 u_char opcode; 391 } cmd; 392 struct { 393 u_char lun_map[8]; 394 } reply; 395 }; 396 397 struct bha_sync { 398 #if BYTE_ORDER == LITTLE_ENDIAN 399 u_char offset :4, 400 period :3, 401 valid :1; 402 #else 403 u_char valid :1, 404 period :3, 405 offset :4; 406 #endif 407 }; 408 409 struct bha_setup_reply { 410 #if BYTE_ORDER == LITTLE_ENDIAN 411 u_int8_t sync_neg :1, 412 parity :1, 413 :6; 414 #else 415 u_int8_t :6, 416 parity :1, 417 sync_neg :1; 418 #endif 419 u_int8_t speed; 420 u_int8_t bus_on; 421 u_int8_t bus_off; 422 u_int8_t num_mbx; 423 u_int8_t mbx[3]; /*XXX */ 424 /* doesn't make sense with 32bit addresses */ 425 struct bha_sync sync_low[8]; 426 u_int8_t low_disc_info; 427 }; 428 429 /* additional reply data supplied by wide controllers */ 430 struct bha_setup_reply_wide { 431 u_int8_t signature; 432 u_int8_t letter_d; 433 u_int8_t ha_type; 434 u_int8_t low_wide_allowed; 435 u_int8_t low_wide_active; 436 struct bha_sync sync_high[8]; 437 u_int8_t high_disc_info; 438 u_int8_t reserved; 439 u_int8_t high_wide_allowed; 440 u_int8_t high_wide_active; 441 }; 442 443 struct bha_setup { 444 struct { 445 u_char opcode; 446 u_char len; 447 } cmd; 448 struct bha_setup_reply reply; 449 struct bha_setup_reply_wide reply_w; /* for wide controllers */ 450 }; 451 452 struct bha_period_reply { 453 u_char period[8]; 454 }; 455 456 struct bha_period { 457 struct { 458 u_char opcode; 459 u_char len; 460 } cmd; 461 struct bha_period_reply reply; 462 struct bha_period_reply reply_w; /* for wide controllers */ 463 }; 464 465 struct bha_isadisable { 466 struct { 467 u_char opcode; 468 u_char modifier; 469 } cmd; 470 }; 471 472 /* 473 * bha_isadisable.modifier parameters 474 */ 475 #define BHA_IOMODIFY_330 0x00 476 #define BHA_IOMODIFY_334 0x01 477 #define BHA_IOMODIFY_DISABLE1 0x06 478 #define BHA_IOMODIFY_DISABLE2 0x07 479 480 #define INT9 0x01 481 #define INT10 0x02 482 #define INT11 0x04 483 #define INT12 0x08 484 #define INT14 0x20 485 #define INT15 0x40 486 487 #define EISADMA 0x00 488 #define CHAN0 0x01 489 #define CHAN5 0x20 490 #define CHAN6 0x40 491 #define CHAN7 0x80 492
Indexes created Sat Sep 20 22:09:52 GMT 2025