1 /* $NetBSD: ncr53c9xvar.h,v 1.58 2024/12/06 23:29:10 andvar Exp $ */ 2 3 /*- 4 * Copyright (c) 1997 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, 9 * NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 /* 34 * Copyright (c) 1994 Peter Galbavy. All rights reserved. 35 * 36 * Redistribution and use in source and binary forms, with or without 37 * modification, are permitted provided that the following conditions 38 * are met: 39 * 1. Redistributions of source code must retain the above copyright 40 * notice, this list of conditions and the following disclaimer. 41 * 2. Redistributions in binary form must reproduce the above copyright 42 * notice, this list of conditions and the following disclaimer in the 43 * documentation and/or other materials provided with the distribution. 44 * 3. All advertising materials mentioning features or use of this software 45 * must display the following acknowledgement: 46 * This product includes software developed by Peter Galbavy. 47 * 4. The name of the author may not be used to endorse or promote products 48 * derived from this software without specific prior written permission. 49 * 50 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 51 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 52 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 53 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 54 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 55 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 56 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 57 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 58 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 59 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 60 */ 61 62 #ifndef _DEV_IC_NCR53C9XVAR_H_ 63 #define _DEV_IC_NCR53C9XVAR_H_ 64 65 #include <sys/mutex.h> 66 67 /* Set this to 1 for normal debug, or 2 for per-target tracing. */ 68 /* #define NCR53C9X_DEBUG 1 */ 69 70 /* Wide or differential can have 16 targets */ 71 #define NCR_NLUN 8 72 73 #define NCR_ABORT_TIMEOUT 2000 /* time to wait for abort */ 74 #define NCR_SENSE_TIMEOUT 1000 /* time to wait for sense */ 75 76 #define FREQTOCCF(freq) (((freq + 4) / 5)) 77 78 /* 79 * NCR 53c9x variants. Note, these values are used as indexes into 80 * a table; don't modify them unless you know what you're doing. 81 */ 82 #define NCR_VARIANT_ESP100 0 83 #define NCR_VARIANT_ESP100A 1 84 #define NCR_VARIANT_ESP200 2 85 #define NCR_VARIANT_NCR53C94 3 86 #define NCR_VARIANT_NCR53C96 4 87 #define NCR_VARIANT_ESP406 5 88 #define NCR_VARIANT_FAS408 6 89 #define NCR_VARIANT_FAS216 7 90 #define NCR_VARIANT_AM53C974 8 91 #define NCR_VARIANT_FAS366 9 92 #define NCR_VARIANT_NCR53C90_86C01 10 93 #define NCR_VARIANT_MAX 11 94 95 /* 96 * ECB. Holds additional information for each SCSI command Comments: We 97 * need a separate scsi command block because we may need to overwrite it 98 * with a request sense command. Basically, we refrain from fiddling with 99 * the scsipi_xfer struct (except do the expected updating of return values). 100 * We'll generally update: xs->{flags,resid,error,sense,status} and 101 * occasionally xs->retries. 102 */ 103 struct ncr53c9x_ecb { 104 TAILQ_ENTRY(ncr53c9x_ecb) chain; 105 struct scsipi_xfer *xs; /* SCSI xfer ctrl block from above */ 106 int flags; 107 #define ECB_ALLOC 0x01 108 #define ECB_READY 0x02 109 #define ECB_SENSE 0x04 110 #define ECB_ABORT 0x40 111 #define ECB_RESET 0x80 112 #define ECB_TENTATIVE_DONE 0x100 113 int timeout; 114 115 struct { 116 u_char msg[3]; /* Selection Id msg and tags */ 117 struct scsipi_generic cmd; /* SCSI command block */ 118 } cmd; 119 uint8_t *daddr; /* Saved data pointer */ 120 int clen; /* Size of command in cmd.cmd */ 121 int dleft; /* Residue */ 122 u_char stat; /* SCSI status byte */ 123 u_char tag[2]; /* TAG bytes */ 124 u_char pad[1]; 125 126 #if NCR53C9X_DEBUG > 1 127 char trace[1000]; 128 #endif 129 }; 130 #if NCR53C9X_DEBUG > 1 131 #define ECB_TRACE(ecb, msg, a, b) do { \ 132 const char *f = "[" msg "]"; \ 133 size_t n = strlen((ecb)->trace); \ 134 if (n >= (sizeof((ecb)->trace)-100)) \ 135 break; \ 136 snprintf((ecb)->trace + n, sizeof((ecb)->trace) - n, f, a, b); \ 137 } while(0) 138 #else 139 #define ECB_TRACE(ecb, msg, a, b) 140 #endif 141 142 /* 143 * Some info about each (possible) target and LUN on the SCSI bus. 144 * 145 * SCSI I and II devices can have up to 8 LUNs, each with up to 256 146 * outstanding tags. SCSI III devices have 64-bit LUN identifiers 147 * that can be sparsely allocated. 148 * 149 * Since SCSI II devices can have up to 8 LUNs, we use an array 150 * of 8 pointers to ncr53c9x_linfo structures for fast lookup. 151 * Longer LUNs need to traverse the linked list. 152 */ 153 154 struct ncr53c9x_linfo { 155 int64_t lun; 156 LIST_ENTRY(ncr53c9x_linfo) link; 157 time_t last_used; 158 uint8_t used; /* # slots in use */ 159 uint8_t avail; /* where to start scanning */ 160 uint8_t busy; 161 struct ncr53c9x_ecb *untagged; 162 struct ncr53c9x_ecb *queued[256]; 163 }; 164 165 struct ncr53c9x_tinfo { 166 int cmds; /* # of commands processed */ 167 int dconns; /* # of disconnects */ 168 int touts; /* # of timeouts */ 169 int perrs; /* # of parity errors */ 170 int senses; /* # of request sense commands sent */ 171 uint8_t flags; 172 #define T_NEGOTIATE 0x02 /* (Re)Negotiate synchronous options */ 173 #define T_SYNCMODE 0x08 /* SYNC mode has been negotiated */ 174 #define T_SYNCHOFF 0x10 /* SYNC mode for is permanently off */ 175 #define T_RSELECTOFF 0x20 /* RE-SELECT mode is off */ 176 #define T_TAG 0x40 /* Turn on TAG QUEUEs */ 177 #define T_WIDE 0x80 /* Negotiate wide options */ 178 #define T_WDTRSENT 0x04 /* WDTR message has been sent to */ 179 uint8_t period; /* Period suggestion */ 180 uint8_t offset; /* Offset suggestion */ 181 uint8_t cfg3; /* per target config 3 */ 182 uint8_t nextag; /* Next available tag */ 183 uint8_t width; /* width suggestion */ 184 LIST_HEAD(lun_list, ncr53c9x_linfo) luns; 185 struct ncr53c9x_linfo *lun[NCR_NLUN]; /* For speedy lookups */ 186 }; 187 188 /* Look up a lun in a tinfo */ 189 #define TINFO_LUN(t, l) ( \ 190 (((l) < NCR_NLUN) && (((t)->lun[(l)]) != NULL)) \ 191 ? ((t)->lun[(l)]) \ 192 : ncr53c9x_lunsearch((t), (int64_t)(l)) \ 193 ) 194 195 /* Register a linenumber (for debugging) */ 196 #define LOGLINE(p) 197 198 #define NCR_SHOWECBS 0x01 199 #define NCR_SHOWINTS 0x02 200 #define NCR_SHOWCMDS 0x04 201 #define NCR_SHOWMISC 0x08 202 #define NCR_SHOWTRAC 0x10 203 #define NCR_SHOWSTART 0x20 204 #define NCR_SHOWPHASE 0x40 205 #define NCR_SHOWDMA 0x80 206 #define NCR_SHOWCCMDS 0x100 207 #define NCR_SHOWMSGS 0x200 208 209 #ifdef NCR53C9X_DEBUG 210 extern int ncr53c9x_debug; 211 #define NCR_ECBS(str) \ 212 do {if (ncr53c9x_debug & NCR_SHOWECBS) printf str;} while (0) 213 #define NCR_MISC(str) \ 214 do {if (ncr53c9x_debug & NCR_SHOWMISC) printf str;} while (0) 215 #define NCR_INTS(str) \ 216 do {if (ncr53c9x_debug & NCR_SHOWINTS) printf str;} while (0) 217 #define NCR_TRACE(str) \ 218 do {if (ncr53c9x_debug & NCR_SHOWTRAC) printf str;} while (0) 219 #define NCR_CMDS(str) \ 220 do {if (ncr53c9x_debug & NCR_SHOWCMDS) printf str;} while (0) 221 #define NCR_START(str) \ 222 do {if (ncr53c9x_debug & NCR_SHOWSTART) printf str;}while (0) 223 #define NCR_PHASE(str) \ 224 do {if (ncr53c9x_debug & NCR_SHOWPHASE) printf str;}while (0) 225 #define NCR_DMA(str) \ 226 do {if (ncr53c9x_debug & NCR_SHOWDMA) printf str;}while (0) 227 #define NCR_MSGS(str) \ 228 do {if (ncr53c9x_debug & NCR_SHOWMSGS) printf str;}while (0) 229 #else 230 #define NCR_ECBS(str) 231 #define NCR_MISC(str) 232 #define NCR_INTS(str) 233 #define NCR_TRACE(str) 234 #define NCR_CMDS(str) 235 #define NCR_START(str) 236 #define NCR_PHASE(str) 237 #define NCR_DMA(str) 238 #define NCR_MSGS(str) 239 #endif 240 241 #define NCR_MAX_MSG_LEN 8 242 243 struct ncr53c9x_softc; 244 245 /* 246 * Function switch used as glue to MD code. 247 */ 248 struct ncr53c9x_glue { 249 /* Mandatory entry points. */ 250 uint8_t (*gl_read_reg)(struct ncr53c9x_softc *, int); 251 void (*gl_write_reg)(struct ncr53c9x_softc *, int, uint8_t); 252 int (*gl_dma_isintr)(struct ncr53c9x_softc *); 253 void (*gl_dma_reset)(struct ncr53c9x_softc *); 254 int (*gl_dma_intr)(struct ncr53c9x_softc *); 255 int (*gl_dma_setup)(struct ncr53c9x_softc *, 256 uint8_t **, size_t *, int, size_t *); 257 void (*gl_dma_go)(struct ncr53c9x_softc *); 258 void (*gl_dma_stop)(struct ncr53c9x_softc *); 259 int (*gl_dma_isactive)(struct ncr53c9x_softc *); 260 261 /* Optional entry points. */ 262 void (*gl_clear_latched_intr)(struct ncr53c9x_softc *); 263 }; 264 265 struct ncr53c9x_softc { 266 device_t sc_dev; /* us as a device */ 267 268 struct evcnt sc_intrcnt; /* intr count */ 269 struct scsipi_adapter sc_adapter; /* out scsipi adapter */ 270 struct scsipi_channel sc_channel; /* our scsipi channel */ 271 device_t sc_child; /* attached scsibus, if any */ 272 struct callout sc_watchdog; /* periodic timer */ 273 274 const struct ncr53c9x_glue *sc_glue; /* glue to MD code */ 275 276 int sc_cfflags; /* Copy of config flags */ 277 278 /* register defaults */ 279 uint8_t sc_cfg1; /* Config 1 */ 280 uint8_t sc_cfg2; /* Config 2, not ESP100 */ 281 uint8_t sc_cfg3; /* Config 3, ESP200,FAS */ 282 uint8_t sc_cfg3_fscsi; /* Chip-specific FSCSI bit */ 283 uint8_t sc_cfg4; /* Config 4, only ESP200 */ 284 uint8_t sc_cfg5; /* Config 5, only ESP200 */ 285 uint8_t sc_ccf; /* Clock Conversion */ 286 uint8_t sc_timeout; 287 288 /* register copies, see espreadregs() */ 289 uint8_t sc_espintr; 290 uint8_t sc_espstat; 291 uint8_t sc_espstep; 292 uint8_t sc_espstat2; 293 uint8_t sc_espfflags; 294 295 /* Lists of command blocks */ 296 TAILQ_HEAD(ecb_list, ncr53c9x_ecb) 297 ready_list; 298 299 struct ncr53c9x_ecb *sc_nexus; /* Current command */ 300 int sc_ntarg; 301 struct ncr53c9x_tinfo *sc_tinfo; 302 303 /* Data about the current nexus (updated for every cmd switch) */ 304 uint8_t *sc_dp; /* Current data pointer */ 305 ssize_t sc_dleft; /* Data left to transfer */ 306 307 /* Adapter state */ 308 int sc_phase; /* Copy of what bus phase we are in */ 309 int sc_prevphase; /* Copy of what bus phase we were in */ 310 uint8_t sc_state; /* State applicable to the adapter */ 311 uint8_t sc_flags; /* See below */ 312 uint8_t sc_selid; 313 uint8_t sc_lastcmd; 314 315 /* Message stuff */ 316 uint16_t sc_msgify; /* IDENTIFY msg associated with this nexus */ 317 uint16_t sc_msgout; /* What message is on its way out? */ 318 uint16_t sc_msgpriq; /* One or more messages to send (encoded) */ 319 uint16_t sc_msgoutq; /* What messages have been sent so far? */ 320 321 uint8_t *sc_omess; /* MSGOUT buffer */ 322 uint8_t *sc_omp; /* Message pointer (for multibyte messages) */ 323 size_t sc_omlen; 324 uint8_t *sc_imess; /* MSGIN buffer */ 325 uint8_t *sc_imp; /* Message pointer (for multibyte messages) */ 326 size_t sc_imlen; 327 328 uint8_t *sc_cmdp; /* Command pointer (for DMAed commands) */ 329 size_t sc_cmdlen; /* Size of command in transit */ 330 331 /* Hardware attributes */ 332 int sc_freq; /* SCSI bus frequency in MHz */ 333 int sc_id; /* Our SCSI id */ 334 int sc_rev; /* Chip revision */ 335 int sc_features; /* Chip features */ 336 int sc_minsync; /* Minimum sync period / 4 */ 337 int sc_maxxfer; /* Maximum transfer size */ 338 339 kmutex_t sc_lock; /* driver mutex */ 340 }; 341 342 /* values for sc_state */ 343 #define NCR_IDLE 1 /* waiting for something to do */ 344 #define NCR_SELECTING 2 /* SCSI command is arbiting */ 345 #define NCR_RESELECTED 3 /* Has been reselected */ 346 #define NCR_IDENTIFIED 4 /* Has gotten IFY but not TAG */ 347 #define NCR_CONNECTED 5 /* Actively using the SCSI bus */ 348 #define NCR_DISCONNECT 6 /* MSG_DISCONNECT received */ 349 #define NCR_CMDCOMPLETE 7 /* MSG_CMDCOMPLETE received */ 350 #define NCR_CLEANING 8 351 #define NCR_SBR 9 /* Expect a SCSI RST because we commanded it */ 352 353 /* values for sc_flags */ 354 #define NCR_DROP_MSGI 0x01 /* Discard all msgs (parity err detected) */ 355 #define NCR_ABORTING 0x02 /* Bailing out */ 356 #define NCR_DOINGDMA 0x04 /* The FIFO data path is active! */ 357 #define NCR_SYNCHNEGO 0x08 /* Synch negotiation in progress. */ 358 #define NCR_ICCS 0x10 /* Expect status phase results */ 359 #define NCR_WAITI 0x20 /* Waiting for non-DMA data to arrive */ 360 #define NCR_ATN 0x40 /* ATN asserted */ 361 #define NCR_EXPECT_ILLCMD 0x80 /* Expect Illegal Command Interrupt */ 362 363 /* values for sc_features */ 364 #define NCR_F_HASCFG3 0x01 /* chip has CFG3 register */ 365 #define NCR_F_FASTSCSI 0x02 /* chip supports Fast mode */ 366 #define NCR_F_DMASELECT 0x04 /* can do dmaselect */ 367 #define NCR_F_SELATN3 0x08 /* chip supports SELATN3 command */ 368 369 /* values for sc_msgout */ 370 #define SEND_DEV_RESET 0x0001 371 #define SEND_PARITY_ERROR 0x0002 372 #define SEND_INIT_DET_ERR 0x0004 373 #define SEND_REJECT 0x0008 374 #define SEND_IDENTIFY 0x0010 375 #define SEND_ABORT 0x0020 376 #define SEND_WDTR 0x0040 377 #define SEND_SDTR 0x0080 378 #define SEND_TAG 0x0100 379 380 /* SCSI Status codes */ 381 #define ST_MASK 0x3e /* bit 0,6,7 is reserved */ 382 383 /* phase bits */ 384 #define IOI 0x01 385 #define CDI 0x02 386 #define MSGI 0x04 387 388 /* Information transfer phases */ 389 #define DATA_OUT_PHASE (0) 390 #define DATA_IN_PHASE (IOI) 391 #define COMMAND_PHASE (CDI) 392 #define STATUS_PHASE (CDI|IOI) 393 #define MESSAGE_OUT_PHASE (MSGI|CDI) 394 #define MESSAGE_IN_PHASE (MSGI|CDI|IOI) 395 396 #define PHASE_MASK (MSGI|CDI|IOI) 397 398 /* Some pseudo phases for getphase()*/ 399 #define BUSFREE_PHASE 0x100 /* Re/Selection no longer valid */ 400 #define INVALID_PHASE 0x101 /* Re/Selection valid, but no REQ yet */ 401 #define PSEUDO_PHASE 0x100 /* "pseudo" bit */ 402 403 /* 404 * Macros to read and write the chip's registers. 405 */ 406 #define NCR_READ_REG(sc, reg) \ 407 (*(sc)->sc_glue->gl_read_reg)((sc), (reg)) 408 #define NCR_WRITE_REG(sc, reg, val) \ 409 (*(sc)->sc_glue->gl_write_reg)((sc), (reg), (val)) 410 411 #ifdef NCR53C9X_DEBUG 412 #define NCRCMD(sc, cmd) do { \ 413 if ((ncr53c9x_debug & NCR_SHOWCCMDS) != 0) \ 414 printf("<CMD:0x%x %d>", (unsigned int)cmd, __LINE__); \ 415 sc->sc_lastcmd = cmd; \ 416 NCR_WRITE_REG(sc, NCR_CMD, cmd); \ 417 } while (/* CONSTCOND */ 0) 418 #else 419 #define NCRCMD(sc, cmd) NCR_WRITE_REG(sc, NCR_CMD, cmd) 420 #endif 421 422 /* 423 * DMA macros for NCR53c9x 424 */ 425 #define NCRDMA_ISINTR(sc) (*(sc)->sc_glue->gl_dma_isintr)((sc)) 426 #define NCRDMA_RESET(sc) (*(sc)->sc_glue->gl_dma_reset)((sc)) 427 #define NCRDMA_INTR(sc) (*(sc)->sc_glue->gl_dma_intr)((sc)) 428 #define NCRDMA_SETUP(sc, addr, len, datain, dmasize) \ 429 (*(sc)->sc_glue->gl_dma_setup)((sc), (addr), (len), (datain), (dmasize)) 430 #define NCRDMA_GO(sc) (*(sc)->sc_glue->gl_dma_go)((sc)) 431 #define NCRDMA_ISACTIVE(sc) (*(sc)->sc_glue->gl_dma_isactive)((sc)) 432 433 /* 434 * Macro to convert the chip register Clock Per Byte value to 435 * Synchronous Transfer Period. 436 */ 437 #define ncr53c9x_cpb2stp(sc, cpb) \ 438 ((250 * (cpb)) / (sc)->sc_freq) 439 440 void ncr53c9x_attach(struct ncr53c9x_softc *); 441 int ncr53c9x_detach(struct ncr53c9x_softc *, int); 442 void ncr53c9x_scsipi_request(struct scsipi_channel *chan, 443 scsipi_adapter_req_t req, void *); 444 void ncr53c9x_reset(struct ncr53c9x_softc *); 445 int ncr53c9x_intr(void *); 446 void ncr53c9x_init(struct ncr53c9x_softc *, int); 447 void ncr53c9x_abort(struct ncr53c9x_softc *, struct ncr53c9x_ecb *); 448 449 #endif /* _DEV_IC_NCR53C9XVAR_H_ */ 450
Indexes created Sat Sep 20 22:09:52 GMT 2025