1 /* $NetBSD: uslsareg.h,v 1.2 2025/02/16 18:31:37 jakllsch Exp $ */ 2 3 /* 4 * Copyright (c) 2011 Jonathan A. Kollasch. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 * 27 */ 28 29 #ifndef _SLSAREG_H_ 30 #define _SLSAREG_H_ 31 32 #include <lib/libkern/libkern.h> 33 #include <sys/systm.h> 34 #include <sys/types.h> 35 36 /* From Silicon Laboratories Application Note AN571 */ 37 38 #define SLSA_FREQ 3686400 39 40 /* USB Control Requests */ 41 #define SLSA_R_IFC_ENABLE 0x00 42 #define SLSA_R_SET_BAUDDIV 0x01 43 #define SLSA_R_GET_BAUDDIV 0x02 44 #define SLSA_R_SET_LINE_CTL 0x03 45 #define SLSA_R_GET_LINE_CTL 0x04 46 #define SLSA_R_SET_BREAK 0x05 47 #define SLSA_R_IMM_CHAR 0x06 48 #define SLSA_R_SET_MHS 0x07 49 #define SLSA_R_GET_MDMSTS 0x08 50 #define SLSA_R_SET_XON 0x09 51 #define SLSA_R_SET_XOFF 0x0a 52 #define SLSA_R_SET_EVENTMASK 0x0b 53 #define SLSA_R_GET_EVENTMASK 0x0c 54 #define SLSA_R_SET_CHAR 0x0d 55 #define SLSA_R_GET_CHARS 0x0e 56 #define SLSA_R_GET_PROPS 0x0f 57 #define SLSA_R_GET_COMM_STATUS 0x10 58 #define SLSA_R_RESET 0x11 59 #define SLSA_R_PURGE 0x12 60 #define SLSA_R_SET_FLOW 0x13 61 #define SLSA_R_GET_FLOW 0x14 62 #define SLSA_R_EMBED_EVENTS 0x15 63 #define SLSA_R_GET_EVENTSTATE 0x16 64 #define SLSA_R_SET_RECEIVE 0x17 65 #define SLSA_R_GET_RECEIVE 0x18 66 #define SLSA_R_SET_CHARS 0x19 67 #define SLSA_R_GET_BAUDRATE 0x1d 68 #define SLSA_R_SET_BAUDRATE 0x1e 69 #define SLSA_R_VENDOR_SPECIFIC 0xff 70 71 72 #define SLSA_RV_IFC_ENABLE_DISABLE 0x0000 73 #define SLSA_RV_IFC_ENABLE_ENABLE 0x0001 74 75 76 #define SLSA_RV_BAUDDIV(b) (SLSA_FREQ/(b)) 77 78 79 #define SLSA_RV_LINE_CTL_STOP __BITS(3,0) 80 #define SLSA_RV_LINE_CTL_PARITY __BITS(7,4) 81 #define SLSA_RV_LINE_CTL_LEN __BITS(15,8) 82 83 #define SLSA_RV_LINE_CTL_STOP_1 __SHIFTIN(0, SLSA_RV_LINE_CTL_STOP) 84 #define SLSA_RV_LINE_CTL_STOP_1_5 __SHIFTIN(1, SLSA_RV_LINE_CTL_STOP) 85 #define SLSA_RV_LINE_CTL_STOP_2 __SHIFTIN(2, SLSA_RV_LINE_CTL_STOP) 86 87 #define SLSA_RV_LINE_CTL_PARITY_NONE __SHIFTIN(0, SLSA_RV_LINE_CTL_PARITY) 88 #define SLSA_RV_LINE_CTL_PARITY_ODD __SHIFTIN(1, SLSA_RV_LINE_CTL_PARITY) 89 #define SLSA_RV_LINE_CTL_PARITY_EVEN __SHIFTIN(2, SLSA_RV_LINE_CTL_PARITY) 90 #define SLSA_RV_LINE_CTL_PARITY_MARK __SHIFTIN(3, SLSA_RV_LINE_CTL_PARITY) 91 #define SLSA_RV_LINE_CTL_PARITY_SPACE __SHIFTIN(4, SLSA_RV_LINE_CTL_PARITY) 92 93 #define SLSA_RV_LINE_CTL_LEN_5 __SHIFTIN(5, SLSA_RV_LINE_CTL_LEN) 94 #define SLSA_RV_LINE_CTL_LEN_6 __SHIFTIN(6, SLSA_RV_LINE_CTL_LEN) 95 #define SLSA_RV_LINE_CTL_LEN_7 __SHIFTIN(7, SLSA_RV_LINE_CTL_LEN) 96 #define SLSA_RV_LINE_CTL_LEN_8 __SHIFTIN(8, SLSA_RV_LINE_CTL_LEN) 97 98 99 #define SLSA_RV_SET_BREAK_DISABLE 0x0000 100 #define SLSA_RV_SET_BREAK_ENABLE 0x0001 101 102 103 #define SLSA_RV_SET_MHS_DTR __BIT(0) 104 #define SLSA_RV_SET_MHS_RTS __BIT(1) 105 /* AN571 calls these next two masks, they're more like change-enables */ 106 #define SLSA_RV_SET_MHS_DTR_MASK __BIT(8) 107 #define SLSA_RV_SET_MHS_RTS_MASK __BIT(9) 108 109 110 #define SLSA_RL_GET_MDMSTS 1 111 /* data in uint8_t returned from GET_MDMSTS */ 112 #define SLSA_MDMSTS_DTR __BIT(0) 113 #define SLSA_MDMSTS_RTS __BIT(1) 114 #define SLSA_MDMSTS_CTS __BIT(4) 115 #define SLSA_MDMSTS_DSR __BIT(5) 116 #define SLSA_MDMSTS_RI __BIT(6) 117 #define SLSA_MDMSTS_DCD __BIT(7) 118 119 120 #define SLSA_RL_SET_EVENTMASK 0 121 #define SLSA_RL_GET_EVENTMASK 2 122 #define SLSA_RL_GET_EVENTSTATE 2 123 #define SLSA_EVENT_TERI __BIT(0) /* RI trailing edge */ 124 #define SLSA_EVENT_RB80 __BIT(2) /* Rx buf 80% full */ 125 #define SLSA_EVENT_CR __BIT(8) /* char received */ 126 #define SLSA_EVENT_SCR __BIT(9) /* special char received */ 127 #define SLSA_EVENT_TQE __BIT(10) /* Tx queue empty */ 128 #define SLSA_EVENT_DCTS __BIT(11) /* CTS changed */ 129 #define SLSA_EVENT_DDSR __BIT(12) /* DSR changed */ 130 #define SLSA_EVENT_DDCD __BIT(13) /* DCD changed */ 131 #define SLSA_EVENT_BI __BIT(14) /* line break received */ 132 #define SLSA_EVENT_LSE __BIT(15) /* line status error */ 133 134 135 /* USETW2(wValue, char, index) */ 136 #define SLSA_RV_SET_CHAR_EofChar 0 137 #define SLSA_RV_SET_CHAR_ErrorChar 1 138 #define SLSA_RV_SET_CHAR_BreakChar 2 139 #define SLSA_RV_SET_CHAR_EventChar 3 140 #define SLSA_RV_SET_CHAR_XonChar 4 141 #define SLSA_RV_SET_CHAR_XoffChar 5 142 143 144 #define SLSA_RV_PURGE_TX __BIT(0) 145 #define SLSA_RV_PURGE_RX __BIT(1) 146 #define SLSA_RV_PURGE_TX1 __BIT(2) /* what's the second set for? */ 147 #define SLSA_RV_PURGE_RX1 __BIT(3) 148 149 150 /* Communication Properties Response Table 7. */ 151 struct slsa_cpr { 152 uint16_t wLength; 153 uint16_t bcdVersion; 154 uint32_t ulServiceMask; 155 uint32_t _reserved8; 156 uint32_t ulMaxTxQueue; 157 uint32_t ulMaxRxQueue; 158 uint32_t ulMaxBaud; 159 uint32_t ulProvSubType; 160 uint32_t ulProvCapabilities; 161 uint32_t ulSettableParams; 162 uint32_t ulSettableBaud; 163 uint16_t wSettableData; 164 uint16_t _reserved42; 165 uint32_t ulCurrentTxQueue; 166 uint32_t ulCurrentRxQueue; 167 uint32_t _reserved52; 168 uint32_t _reserved56; 169 uint16_t uniProvName[0]; 170 }; 171 CTASSERT(offsetof(struct slsa_cpr, _reserved8) == 8); 172 CTASSERT(offsetof(struct slsa_cpr, _reserved42) == 42); 173 CTASSERT(offsetof(struct slsa_cpr, uniProvName[0]) == 60); 174 #define SLSA_CPR_MINLEN 60 175 176 #define SLSA_RL_GET_COMM_STATUS 19 177 /* Serial Status Response Table 8. */ 178 struct slsa_ssr { 179 uint32_t ulErrors; 180 uint32_t ulHoldReasons; 181 uint32_t ulAmountInInQueue; 182 uint32_t ulAmountInOutQueue; 183 uint8_t bEofReceived; 184 uint8_t bWaitForImmediate; 185 uint8_t bReserved; 186 }; 187 CTASSERT(offsetof(struct slsa_ssr, bReserved) == 18); 188 CTASSERT(sizeof(struct slsa_ssr) >= SLSA_RL_GET_COMM_STATUS); 189 190 #define SLSA_RL_SET_FLOW 16 191 #define SLSA_RL_GET_FLOW 16 192 /* Flow Control State Setting/Response Table 9. */ 193 struct slsa_fcs { 194 uint32_t ulControlHandshake; 195 #define SERIAL_DTR_MASK __BITS(0, 1) 196 #define SERIAL_CTS_HANDSHAKE __BIT(3) 197 #define SERIAL_DSR_HANDSHAKE __BIT(4) 198 #define SERIAL_DCD_HANDSHAKE __BIT(5) 199 #define SERIAL_DSR_SENSITIVITY __BIT(6) 200 uint32_t ulFlowReplace; 201 #define SERIAL_AUTO_TRANSMIT __BIT(0) 202 #define SERIAL_AUTO_RECEIVE __BIT(1) 203 #define SERIAL_ERROR_CHAR __BIT(2) 204 #define SERIAL_NULL_STRIPPING __BIT(3) 205 #define SERIAL_BREAK_CHAR __BIT(4) 206 #define SERIAL_RTS_MASK __BITS(6, 7) 207 #define SERIAL_XOFF_CONTINUE __BIT(31) 208 uint32_t ulXonLimit; 209 uint32_t ulXoffLimit; 210 }; 211 CTASSERT(sizeof(struct slsa_fcs) == SLSA_RL_SET_FLOW); 212 CTASSERT(sizeof(struct slsa_fcs) == SLSA_RL_GET_FLOW); 213 214 #define SLSA_RL_SET_CHARS 6 215 #define SLSA_RL_GET_CHARS 6 216 /* Special Characters Response Table 12. */ 217 struct slsa_scr { 218 uint8_t bEofChar; 219 uint8_t bErrorChar; 220 uint8_t bBreakChar; 221 uint8_t bEventChar; 222 uint8_t bXonChar; 223 uint8_t bXoffChar; 224 }; 225 CTASSERT(sizeof(struct slsa_scr) == SLSA_RL_SET_CHARS); 226 CTASSERT(sizeof(struct slsa_scr) == SLSA_RL_GET_CHARS); 227 228 229 #define SLSA_RV_VENDOR_SPECIFIC_READ_LATCH 0x00c2 230 #define SLSA_RL_VENDOR_SPECIFIC_READ_LATCH 1 231 232 #define SLSA_RV_VENDOR_SPECIFIC_WRITE_LATCH 0x37e1 233 /* 234 * on CP2103/CP2104 the latch state and latch mask are 235 * written in the high and low bytes of wIndex respectively 236 * 237 * on CP2105, wIndex is the interface number, and the same 238 * latch/mask is written as data instead. 239 */ 240 #define SLSA_RL_VENDOR_SPECIFIC_WRITE_LATCH_CP2103 0 241 #define SLSA_RL_VENDOR_SPECIFIC_WRITE_LATCH_CP2105 2 242 243 #endif /* _SLSAREG_H_ */ 244
Indexes created Sun Sep 21 20:09:37 GMT 2025