1 /* $NetBSD: wireg.h,v 1.53 2007/12/25 18:33:39 perry Exp $ */ 2 3 /* 4 * Copyright (c) 1997, 1998, 1999 5 * Bill Paul <wpaul (at) ctr.columbia.edu>. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Bill Paul. 18 * 4. Neither the name of the author nor the names of any co-contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35 /* 36 * FreeBSD driver ported to NetBSD by Bill Sommerfeld in the back of the 37 * Oslo IETF plenary meeting. 38 */ 39 40 #define WI_DELAY 5 41 #define WI_TIMEOUT (500000/WI_DELAY) /* 500 ms */ 42 43 #define WI_PORT0 (0 << 8) 44 #define WI_PORT1 (1 << 8) 45 #define WI_PORT2 (2 << 8) 46 #define WI_PORT3 (3 << 8) 47 #define WI_PORT4 (4 << 8) 48 #define WI_PORT5 (5 << 8) 49 50 /* 51 * The WaveLAN/IEEE cards contain an 802.11 MAC controller which Lucent 52 * calls 'Hermes.' In typical fashion, getting documentation about this 53 * controller is about as easy as squeezing blood from a stone. Here 54 * is more or less what I know: 55 * 56 * - The Hermes controller is firmware driven, and the host interacts 57 * with the Hermes via a firmware interface, which can change. 58 * 59 * - The Hermes is described in a document called: "Hermes Firmware 60 * WaveLAN/IEEE Station Functions," document #010245, which of course 61 * Lucent will not release without an NDA. 62 * 63 * - Lucent has created a library called HCF (Hardware Control Functions) 64 * though which it wants developers to interact with the card. The HCF 65 * is needlessly complex, ill conceived and badly documented. Actually, 66 * the comments in the HCP code itself aren't bad, but the publically 67 * available manual that comes with it is awful, probably due largely to 68 * the fact that it has been emasculated in order to hide information 69 * that Lucent wants to keep proprietary. The purpose of the HCF seems 70 * to be to insulate the driver programmer from the Hermes itself so that 71 * Lucent has an excuse not to release programming in for it. 72 * 73 * - Lucent only makes available documentation and code for 'HCF Light' 74 * which is a stripped down version of HCF with certain features not 75 * implemented, most notably support for 802.11 frames. 76 * 77 * - The HCF code which I have seen blows goats. Whoever decided to 78 * use a 132 column format should be shot. 79 * 80 * Rather than actually use the Lucent HCF library, I have stripped all 81 * the useful information from it and used it to create a driver in the 82 * usual BSD form. Note: I don't want to hear anybody whining about the 83 * fact that the Lucent code is GPLed and mine isn't. I did not actually 84 * put any of Lucent's code in this driver: I only used it as a reference 85 * to obtain information about the underlying hardware. The Hermes 86 * programming interface is not GPLed, so bite me. 87 */ 88 89 /* 90 * Size of Hermes & Prism2 I/O space. 91 */ 92 #define WI_IOSIZE 0x40 93 94 /* 95 * Hermes & Prism2 register definitions 96 */ 97 98 /* Hermes command/status registers. */ 99 #define WI_COMMAND 0x00 100 #define WI_PARAM0 0x02 101 #define WI_PARAM1 0x04 102 #define WI_PARAM2 0x06 103 #define WI_STATUS 0x08 104 #define WI_RESP0 0x0A 105 #define WI_RESP1 0x0C 106 #define WI_RESP2 0x0E 107 108 /* Command register values. */ 109 #define WI_CMD_BUSY 0x8000 /* busy bit */ 110 #define WI_CMD_INI 0x0000 /* initialize */ 111 #define WI_CMD_ENABLE 0x0001 /* enable */ 112 #define WI_CMD_DISABLE 0x0002 /* disable */ 113 #define WI_CMD_DIAG 0x0003 114 #define WI_CMD_ALLOC_MEM 0x000A /* allocate NIC memory */ 115 #define WI_CMD_TX 0x000B /* transmit */ 116 #define WI_CMD_NOTIFY 0x0010 117 #define WI_CMD_INQUIRE 0x0011 118 #define WI_CMD_ACCESS 0x0021 119 #define WI_CMD_PROGRAM 0x0022 120 #define WI_CMD_READEE 0x0030 121 #define WI_CMD_TEST 0x0038 /* PRISM2 test mode */ 122 123 #define WI_CMD_CODE_MASK 0x003F 124 125 /* 126 * Reclaim qualifier bit, applicable to the 127 * TX and INQUIRE commands. 128 */ 129 #define WI_RECLAIM 0x0100 /* reclaim NIC memory */ 130 131 /* 132 * ACCESS command qualifier bits. 133 */ 134 #define WI_ACCESS_READ 0x0000 135 #define WI_ACCESS_WRITE 0x0100 136 137 /* 138 * PROGRAM command qualifier bits. 139 */ 140 #define WI_PROGRAM_DISABLE 0x0000 141 #define WI_PROGRAM_ENABLE_RAM 0x0100 142 #define WI_PROGRAM_ENABLE_NVRAM 0x0200 143 #define WI_PROGRAM_NVRAM 0x0300 144 145 /* 146 * DEBUG mode options. 147 */ 148 #define WI_TEST_MONITOR 0x0B /* monitor mode for testing */ 149 150 /* Status register values */ 151 #define WI_STAT_CMD_CODE 0x003F 152 #define WI_STAT_DIAG_ERR 0x0100 153 #define WI_STAT_INQ_ERR 0x0500 154 #define WI_STAT_CMD_RESULT 0x7F00 155 156 /* memory handle management registers */ 157 #define WI_INFO_FID 0x10 158 #define WI_RX_FID 0x20 159 #define WI_ALLOC_FID 0x22 160 #define WI_TX_CMP_FID 0x24 161 162 /* 163 * Buffer Access Path (BAP) registers. 164 * These are I/O channels. I believe you can use each one for 165 * any desired purpose independently of the other. 166 * Currently, we only use BAP0, and perhaps BAP1 can be used 167 * within interrupt context. 168 */ 169 #define WI_SEL0 0x18 170 #define WI_SEL1 0x1A 171 #define WI_OFF0 0x1C 172 #define WI_OFF1 0x1E 173 #define WI_DATA0 0x36 174 #define WI_DATA1 0x38 175 176 #define WI_OFF_BUSY 0x8000 177 #define WI_OFF_ERR 0x4000 178 #define WI_OFF_DATAOFF 0x0FFF 179 180 /* Event registers */ 181 #define WI_EVENT_STAT 0x30 /* Event status */ 182 #define WI_INT_EN 0x32 /* Interrupt enable/disable */ 183 #define WI_EVENT_ACK 0x34 /* Ack event */ 184 185 /* Events */ 186 #define WI_EV_TICK 0x8000 /* aux timer tick */ 187 #define WI_EV_RES 0x4000 /* controller h/w error (time out) */ 188 #define WI_EV_INFO_DROP 0x2000 /* no RAM to build unsolicited frame */ 189 #define WI_EV_NO_CARD 0x0800 /* card removed (hunh?) */ 190 #define WI_EV_DUIF_RX 0x0400 /* wavelan management packet received */ 191 #define WI_EV_INFO 0x0080 /* async info frame */ 192 #define WI_EV_CMD 0x0010 /* command completed */ 193 #define WI_EV_ALLOC 0x0008 /* async alloc/reclaim completed */ 194 #define WI_EV_TX_EXC 0x0004 /* async xmit completed with failure */ 195 #define WI_EV_TX 0x0002 /* async xmit completed successfully */ 196 #define WI_EV_RX 0x0001 /* async rx completed */ 197 198 /* Host software registers */ 199 #define WI_SW0 0x28 200 #define WI_SW1 0x2A 201 #define WI_SW2 0x2C 202 #define WI_SW3 0x2E /* does not appear in Prism2 */ 203 204 #define WI_CNTL 0x14 205 206 #define WI_CNTL_AUX_ENA 0xC000 207 #define WI_CNTL_AUX_ENA_STAT 0xC000 208 #define WI_CNTL_AUX_DIS_STAT 0x0000 209 #define WI_CNTL_AUX_ENA_CNTL 0x8000 210 #define WI_CNTL_AUX_DIS_CNTL 0x4000 211 212 #define WI_AUX_PAGE 0x3A 213 #define WI_AUX_OFFSET 0x3C 214 #define WI_AUX_DATA 0x3E 215 216 #define WI_AUX_PGSZ 128 217 #define WI_AUX_KEY0 0xfe01 218 #define WI_AUX_KEY1 0xdc23 219 #define WI_AUX_KEY2 0xba45 220 221 #define WI_COR 0x40 /* only for Symbol */ 222 #define WI_COR_RESET 0x0080 223 #define WI_COR_IOMODE 0x0041 224 225 #define WI_HCR 0x42 /* only for Symbol */ 226 #define WI_HCR_4WIRE 0x0010 227 #define WI_HCR_RUN 0x0007 228 #define WI_HCR_HOLD 0x000f 229 #define WI_HCR_EEHOLD 0x00ce 230 231 #define WI_TMD_COR 0x14 /* Prism COR (TMD) */ 232 #define WI_TMD_IO 0x18 /* Prism I/O space (TMD) */ 233 234 /* 235 * PCI Host Interface Registers (HFA3842 Specific) 236 * The value of all Register's Offset, such as WI_INFO_FID and WI_PARAM0, 237 * has doubled. 238 * About WI_PCI_COR: In this Register, only soft-reset bit implement; Bit(7). 239 */ 240 #define WI_PCI_COR 0x4C 241 #define WI_PCI_HCR 0x5C 242 #define WI_PCI_MASTER0_ADDRH 0x80 243 #define WI_PCI_MASTER0_ADDRL 0x84 244 #define WI_PCI_MASTER0_LEN 0x88 245 #define WI_PCI_MASTER0_CON 0x8C 246 247 #define WI_PCI_STATUS 0x98 248 249 #define WI_PCI_MASTER1_ADDRH 0xA0 250 #define WI_PCI_MASTER1_ADDRL 0xA4 251 #define WI_PCI_MASTER1_LEN 0xA8 252 #define WI_PCI_MASTER1_CON 0xAC 253 254 #define WI_COR_SOFT_RESET (1 << 7) 255 #define WI_COR_CLEAR 0x00 256 257 /* 258 * One form of communication with the Hermes is with what Lucent calls 259 * LTV records, where LTV stands for Length, Type and Value. The length 260 * and type are 16 bits and are in native byte order. The value is in 261 * multiples of 16 bits and is in little endian byte order. 262 */ 263 struct wi_lt_hdr { 264 u_int16_t wi_len; 265 u_int16_t wi_type; 266 /* value is vary depends on resource id */ 267 }; 268 269 /* 270 * Download buffer location and length (0xFD01). 271 */ 272 struct wi_dnld_buf { 273 u_int16_t wi_buf_pg; /* page addr of intermediate dl buf*/ 274 u_int16_t wi_buf_off; /* offset of idb */ 275 u_int16_t wi_buf_len; /* len of idb */ 276 }; 277 278 /* 279 * Mem sizes (0xFD02). 280 */ 281 struct wi_memsz { 282 u_int16_t wi_mem_ram; 283 u_int16_t wi_mem_nvram; 284 }; 285 286 /* 287 * NIC Identification (0xFD0B, 0xFD20) 288 */ 289 struct wi_ver { 290 u_int16_t wi_ver[4]; 291 }; 292 293 /* define card ident */ 294 /* Lucent */ 295 #define WI_NIC_LUCENT_ID 0x0001 296 #define WI_NIC_LUCENT_STR "Lucent Technologies, WaveLAN/IEEE" 297 298 #define WI_NIC_SONY_ID 0x0002 299 #define WI_NIC_SONY_STR "Sony WaveLAN/IEEE" 300 301 #define WI_NIC_LUCENT_EMB_ID 0x0005 302 #define WI_NIC_LUCENT_EMB_STR "Lucent Embedded WaveLAN/IEEE" 303 304 /* Intersil */ 305 #define WI_NIC_EVB2_ID 0x8000 306 #define WI_NIC_EVB2_STR "RF:PRISM2 MAC:HFA3841" 307 308 #define WI_NIC_HWB3763_ID 0x8001 309 #define WI_NIC_HWB3763_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3763 rev.B" 310 311 #define WI_NIC_HWB3163_ID 0x8002 312 #define WI_NIC_HWB3163_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.A" 313 314 #define WI_NIC_HWB3163B_ID 0x8003 315 #define WI_NIC_HWB3163B_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3163 rev.B" 316 317 #define WI_NIC_EVB3_ID 0x8004 318 #define WI_NIC_EVB3_STR "RF:PRISM2 MAC:HFA3842 CARD:HFA3842 EVAL" 319 320 #define WI_NIC_HWB1153_ID 0x8007 321 #define WI_NIC_HWB1153_STR "RF:PRISM1 MAC:HFA3841 CARD:HWB1153" 322 323 #define WI_NIC_P2_SST_ID 0x8008 /* Prism2 with SST flush */ 324 #define WI_NIC_P2_SST_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3163-SST-flash" 325 326 #define WI_NIC_EVB2_SST_ID 0x8009 327 #define WI_NIC_EVB2_SST_STR "RF:PRISM2 MAC:HFA3841 CARD:HWB3163-SST-flash" 328 329 #define WI_NIC_3842_EVA_ID 0x800A /* Prism2 3842 Evaluation Board */ 330 #define WI_NIC_3842_EVA_STR "RF:PRISM2 MAC:HFA3842 CARD:HFA3842 EVAL" 331 332 #define WI_NIC_3842_PCMCIA_AMD_ID 0x800B /* Prism2.5 PCMCIA */ 333 #define WI_NIC_3842_PCMCIA_SST_ID 0x800C 334 #define WI_NIC_3842_PCMCIA_ATM_ID 0x800D 335 #define WI_NIC_3842_PCMCIA_STR "RF:PRISM2.5 MAC:ISL3873B(PCMCIA)" 336 337 #define WI_NIC_3842_MINI_AMD_ID 0x8012 /* Prism2.5 Mini-PCI */ 338 #define WI_NIC_3842_MINI_SST_ID 0x8013 339 #define WI_NIC_3842_MINI_ATM_ID 0x8014 340 #define WI_NIC_3842_MINI_STR "RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)" 341 342 #define WI_NIC_3842_PCI_AMD_ID 0x8016 /* Prism2.5 PCI-bridge */ 343 #define WI_NIC_3842_PCI_SST_ID 0x8017 344 #define WI_NIC_3842_PCI_ATM_ID 0x8018 345 #define WI_NIC_3842_PCI_STR "RF:PRISM2.5 MAC:ISL3874A(PCI-bridge)" 346 347 #define WI_NIC_P3_PCMCIA_AMD_ID 0x801A /* Prism3 PCMCIA */ 348 #define WI_NIC_P3_PCMCIA_SST_ID 0x801B 349 #define WI_NIC_P3_PCMCIA_STR "RF:PRISM3 MAC:ISL3871(PCMCIA)" 350 351 #define WI_NIC_P3_MINI_AMD_ID 0x8021 /* Prism3 Mini-PCI */ 352 #define WI_NIC_P3_MINI_SST_ID 0x8022 353 #define WI_NIC_P3_MINI_STR "RF:PRISM3 MAC:ISL3871(Mini-PCI)" 354 355 /* 356 * List of intended regulatory domains (0xFD11). 357 */ 358 struct wi_domains { 359 u_int16_t wi_domains[6]; 360 }; 361 362 /* 363 * CIS struct (0xFD13). 364 */ 365 struct wi_cis { 366 u_int16_t wi_cis[240]; 367 }; 368 369 /* 370 * Communications quality (0xFD43). 371 */ 372 struct wi_commqual { 373 u_int16_t wi_coms_qual; 374 u_int16_t wi_sig_lvl; 375 u_int16_t wi_noise_lvl; 376 }; 377 378 /* 379 * Actual system scale thresholds (0xFC06, 0xFD46). 380 */ 381 struct wi_scalethresh { 382 u_int16_t wi_energy_detect; 383 u_int16_t wi_carrier_detect; 384 u_int16_t wi_defer; 385 u_int16_t wi_cell_search; 386 u_int16_t wi_out_of_range; 387 u_int16_t wi_delta_snr; 388 }; 389 390 /* 391 * PCF info struct (0xFD87). 392 */ 393 struct wi_pcf { 394 u_int16_t wi_medium_occupancy_limit; 395 u_int16_t wi_cfp_period; 396 u_int16_t wi_cfp_max_duration; 397 }; 398 399 /* 400 * Connection control characteristics. (0xFC00) 401 * 0 == IBSS (802.11 compliant mode) (Only PRISM2) 402 * 1 == Basic Service Set (BSS) 403 * 2 == Wireless Distribution System (WDS) 404 * 3 == Pseudo IBSS 405 * (Only PRISM2; not 802.11 compliant mode, testing use only) 406 * 6 == HOST AP (Only PRISM2) 407 */ 408 #define WI_PORTTYPE_IBSS 0x0 409 #define WI_PORTTYPE_BSS 0x1 410 #define WI_PORTTYPE_WDS 0x2 411 #define WI_PORTTYPE_ADHOC 0x3 412 #define WI_PORTTYPE_HOSTAP 0x6 413 414 /* 415 * Mac addresses. (0xFC01, 0xFC08, 0xFD42) 416 */ 417 struct wi_macaddr { 418 union { 419 u_int16_t wi_mu_mac_addr_aligned[3]; 420 u_int8_t wi_mu_mac_addr[6]; 421 } mu; 422 }; 423 #define wi_mac_addr_aligned mu.wi_mu_mac_addr_aligned 424 #define wi_mac_addr mu.wi_mu_mac_addr 425 426 /* 427 * Station set identification (SSID). (0xFC02, 0xFC04) 428 */ 429 struct wi_ssid { 430 u_int16_t wi_len; 431 u_int8_t wi_ssid[32]; 432 }; 433 434 /* 435 * Set our station name. (0xFC0E) 436 */ 437 struct wi_nodename { 438 u_int16_t wi_nodelen; 439 u_int8_t wi_nodename[32]; 440 }; 441 442 /* 443 * Multicast addresses to be put in filter. We're 444 * allowed up to 16 addresses in the filter. (0xFC80) 445 */ 446 struct wi_mcast { 447 struct ether_addr wi_mcast[16]; 448 }; 449 450 /* 451 * Join request. (0xFCE2) 452 */ 453 struct wi_joinreq { 454 struct ether_addr wi_bssid; 455 u_int16_t wi_chan; 456 }; 457 458 /* 459 * Information frame types. 460 */ 461 #define WI_INFO_NOTIFY 0xF000 /* Handover address */ 462 #define WI_INFO_COUNTERS 0xF100 /* Statistics counters */ 463 #define WI_INFO_SCAN_RESULTS 0xF101 /* Scan results */ 464 #define WI_INFO_HOST_SCAN_RESULTS 0xF104 /* Scan results */ 465 #define WI_INFO_LINK_STAT 0xF200 /* Link status */ 466 #define CONNECTED 1 467 #define DISCONNECTED 2 468 #define AP_CHANGE 3 469 #define AP_OUT_OF_RANGE 4 470 #define AP_IN_RANGE 5 471 #define ASSOC_FAILED 6 472 #define WI_INFO_ASSOC_STAT 0xF201 /* Association status */ 473 struct wi_assoc { 474 u_int16_t wi_assoc_stat; /* Association Status */ 475 #define ASSOC 1 476 #define REASSOC 2 477 #define DISASSOC 3 478 #define ASSOCFAIL 4 479 #define AUTHFAIL 5 480 u_int8_t wi_assoc_sta[6]; /* Station Address */ 481 u_int8_t wi_assoc_osta[6]; /* OLD Station Address */ 482 u_int16_t wi_assoc_reason; /* Reason */ 483 u_int16_t wi_assoc_reserve; /* Reserved */ 484 }; 485 486 #define WI_INFO_AUTH_REQUEST 0xF202 /* Authentication Request (AP) */ 487 #define WI_INFO_POWERSAVE_COUNT 0xF203 /* PowerSave User Count (AP) */ 488 489 /* 490 * Scan Results of Prism2 chip 491 */ 492 493 #define MAXAPINFO 30 494 struct wi_scan_header { 495 u_int16_t wi_reserve; /* future use */ 496 u_int16_t wi_reason; /* The reason this scan was initiated 497 1: Host initiated 498 2: Firmware initiated 499 3: Inquiry request from host */ 500 }; 501 502 struct wi_scan_data_p2 { 503 u_int16_t wi_chid; /* BSS Channel ID from Probe Res.(PR)*/ 504 u_int16_t wi_noise; /* Average Noise Level of the PR */ 505 u_int16_t wi_signal; /* Signal Level on the PR */ 506 u_int8_t wi_bssid[6]; /* MACaddress of BSS responder from PR */ 507 u_int16_t wi_interval; /* BSS beacon interval */ 508 u_int16_t wi_capinfo; /* BSS Capability Information 509 IEEE Std 802.11(1997) ,see 7.3.1.4 */ 510 u_int16_t wi_namelen; /* Length of SSID strings */ 511 u_int8_t wi_name[32]; /* SSID strings */ 512 u_int16_t wi_suprate[5]; /* Supported Rates element from the PR 513 IEEE Std 802.11(1997) ,see 7.3.2.2 */ 514 u_int16_t wi_rate; /* Data rate of the PR */ 515 #define WI_APRATE_1 0x0A /* 1 Mbps */ 516 #define WI_APRATE_2 0x14 /* 2 Mbps */ 517 #define WI_APRATE_5 0x37 /* 5.5 Mbps */ 518 #define WI_APRATE_11 0x6E /* 11 Mbps */ 519 }; 520 521 /* 522 * Scan Results of Lucent chip 523 */ 524 struct wi_scan_data { 525 u_int16_t wi_chid; /* BSS Channel ID from PR */ 526 u_int16_t wi_noise; /* Average Noise Level of the PR */ 527 u_int16_t wi_signal; /* Signal Level on the PR */ 528 u_int8_t wi_bssid[6]; /* MACaddress of BSS responder from PR */ 529 u_int16_t wi_interval; /* BSS beacon interval */ 530 u_int16_t wi_capinfo; /* BSS Capability Information 531 IEEE Std 802.11(1997) ,see 7.3.1.4 */ 532 u_int16_t wi_namelen; /* Length of SSID strings */ 533 u_int8_t wi_name[32]; /* SSID strings */ 534 }; 535 536 /* 537 * transmit/receive frame structure 538 */ 539 struct wi_frame { 540 u_int16_t wi_status; /* 0x00 */ 541 u_int16_t wi_rx_tstamp1; /* 0x02 */ 542 u_int16_t wi_rx_tstamp0; /* 0x04 */ 543 u_int8_t wi_rx_silence; /* 0x06 */ 544 u_int8_t wi_rx_signal; /* 0x07 */ 545 u_int8_t wi_rx_rate; /* 0x08 */ 546 u_int8_t wi_rx_flow; /* 0x09 */ 547 u_int8_t wi_tx_rtry; /* 0x0a */ /* Prism2 AP Only */ 548 u_int8_t wi_tx_rate; /* 0x0b */ /* Prism2 AP Only */ 549 u_int16_t wi_tx_ctl; /* 0x0c */ 550 struct ieee80211_frame_addr4 wi_whdr; /* 0x0e */ 551 u_int16_t wi_dat_len; /* 0x2c */ 552 struct ether_header wi_ehdr; /* 0x2e */ 553 } __packed; 554 555 /* Software support fields are returned untouched by TxOK, TxExc events. */ 556 #define wi_tx_swsup0 wi_rx_silence 557 #define wi_tx_swsup1 wi_rx_signal 558 #define wi_tx_swsup2 wi_rx_rate 559 #define wi_tx_idx wi_rx_flow 560 561 /* Tx Status Field */ 562 #define WI_TXSTAT_RET_ERR 0x0001 563 #define WI_TXSTAT_AGED_ERR 0x0002 564 #define WI_TXSTAT_DISCONNECT 0x0004 565 #define WI_TXSTAT_FORM_ERR 0x0008 566 567 /* Rx Status Field */ 568 #define WI_STAT_BADCRC 0x0001 569 #define WI_STAT_UNDECRYPTABLE 0x0002 570 #define WI_STAT_ERRSTAT 0x0003 571 #define WI_STAT_MAC_PORT 0x0700 572 #define WI_STAT_PCF 0x1000 573 #define WI_RXSTAT_MSG_TYPE 0xE000 574 #define WI_STAT_1042 0x2000 /* RFC1042 encoded */ 575 #define WI_STAT_TUNNEL 0x4000 /* Bridge-tunnel encoded */ 576 #define WI_STAT_WMP_MSG 0x6000 /* WaveLAN-II management protocol */ 577 #define WI_STAT_MGMT 0x8000 /* 802.11b management frames */ 578 579 #define WI_ENC_TX_E_II 0x0E 580 581 #define WI_ENC_TX_1042 0x00 582 #define WI_ENC_TX_TUNNEL 0xF8 583 584 /* TxControl Field (enhanced) */ 585 #define WI_TXCNTL_TX_OK 0x0002 586 #define WI_TXCNTL_TX_EX 0x0004 587 #define WI_TXCNTL_STRUCT_TYPE 0x0018 588 #define WI_ENC_TX_802_3 0x00 589 #define WI_ENC_TX_802_11 0x08 590 #define WI_TXCNTL_ALTRTRY 0x0020 591 #define WI_TXCNTL_NOCRYPT 0x0080 592 593 /* Limit on the number of AIDs handled in the PRISM2-based Host AP mode. */ 594 #define WI_MAX_AID 256 595
Indexes created Sat Sep 20 22:09:52 GMT 2025