1 /* $NetBSD: adb_direct.c,v 1.47 2025/09/07 21:31:20 andvar Exp $ */ 2 3 /* From: adb_direct.c 2.02 4/18/97 jpw */ 4 5 /* 6 * Copyright (C) 1996, 1997 John P. Wittkoski 7 * All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. All advertising materials mentioning features or use of this software 18 * must display the following acknowledgement: 19 * This product includes software developed by John P. Wittkoski. 20 * 4. The name of the author may not be used to endorse or promote products 21 * derived from this software without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 24 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 25 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 26 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 27 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 28 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 29 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 30 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 32 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35 /* 36 * This code is rather messy, but I don't have time right now 37 * to clean it up as much as I would like. 38 * But it works, so I'm happy. :-) jpw 39 */ 40 41 /* 42 * TO DO: 43 * - We could reduce the time spent in the adb_intr_* routines 44 * by having them save the incoming and outgoing data directly 45 * in the adbInbound and adbOutbound queues, as it would reduce 46 * the number of times we need to copy the data around. It 47 * would also make the code more readable and easier to follow. 48 * - (Related to above) Use the header part of adbCommand to 49 * reduce the number of copies we have to do of the data. 50 * - (Related to above) Actually implement the adbOutbound queue. 51 * This is fairly easy once you switch all the intr routines 52 * over to using adbCommand structs directly. 53 * - There is a bug in the state machine of adb_intr_cuda 54 * code that causes hangs, especially on 030 machines, probably 55 * because of some timing issues. Because I have been unable to 56 * determine the exact cause of this bug, I used the timeout function 57 * to check for and recover from this condition. If anyone finds 58 * the actual cause of this bug, the calls to timeout and the 59 * adb_cuda_tickle routine can be removed. 60 */ 61 62 #include <sys/cdefs.h> 63 __KERNEL_RCSID(0, "$NetBSD: adb_direct.c,v 1.47 2025/09/07 21:31:20 andvar Exp $"); 64 65 #include <sys/param.h> 66 #include <sys/systm.h> 67 #include <sys/callout.h> 68 #include <sys/device.h> 69 70 #include <machine/cpu.h> 71 #include <machine/autoconf.h> 72 #include <machine/adbsys.h> 73 #include <machine/pio.h> 74 75 #include <macppc/dev/viareg.h> 76 #include <macppc/dev/adbvar.h> 77 #include <macppc/dev/pm_direct.h> 78 79 #define printf_intr printf 80 81 #ifdef DEBUG 82 #ifndef ADB_DEBUG 83 #define ADB_DEBUG 84 #endif 85 #endif 86 87 /* some misc. leftovers */ 88 #define vPB 0x0000 89 #define vPB3 0x08 90 #define vPB4 0x10 91 #define vPB5 0x20 92 #define vSR_INT 0x04 93 #define vSR_OUT 0x10 94 95 /* the type of ADB action that we are currently preforming */ 96 #define ADB_ACTION_NOTREADY 0x1 /* has not been initialized yet */ 97 #define ADB_ACTION_IDLE 0x2 /* the bus is currently idle */ 98 #define ADB_ACTION_OUT 0x3 /* sending out a command */ 99 #define ADB_ACTION_IN 0x4 /* receiving data */ 100 #define ADB_ACTION_POLLING 0x5 /* polling - II only */ 101 102 /* 103 * These describe the state of the ADB bus itself, although they 104 * don't necessarily correspond directly to ADB states. 105 * Note: these are not really used in the IIsi code. 106 */ 107 #define ADB_BUS_UNKNOWN 0x1 /* we don't know yet - all models */ 108 #define ADB_BUS_IDLE 0x2 /* bus is idle - all models */ 109 #define ADB_BUS_CMD 0x3 /* starting a command - II models */ 110 #define ADB_BUS_ODD 0x4 /* the "odd" state - II models */ 111 #define ADB_BUS_EVEN 0x5 /* the "even" state - II models */ 112 #define ADB_BUS_ACTIVE 0x6 /* active state - IIsi models */ 113 #define ADB_BUS_ACK 0x7 /* currently ACKing - IIsi models */ 114 115 /* 116 * Shortcuts for setting or testing the VIA bit states. 117 * Not all shortcuts are used for every type of ADB hardware. 118 */ 119 #define ADB_SET_STATE_IDLE_CUDA() via_reg_or(VIA1, vBufB, (vPB4 | vPB5)) 120 #define ADB_SET_STATE_TIP() via_reg_and(VIA1, vBufB, ~vPB5) 121 #define ADB_CLR_STATE_TIP() via_reg_or(VIA1, vBufB, vPB5) 122 #define ADB_TOGGLE_STATE_ACK_CUDA() via_reg_xor(VIA1, vBufB, vPB4) 123 #define ADB_SET_STATE_ACKOFF_CUDA() via_reg_or(VIA1, vBufB, vPB4) 124 #define ADB_SET_SR_INPUT() via_reg_and(VIA1, vACR, ~vSR_OUT) 125 #define ADB_SET_SR_OUTPUT() via_reg_or(VIA1, vACR, vSR_OUT) 126 #define ADB_SR() read_via_reg(VIA1, vSR) 127 #define ADB_VIA_INTR_ENABLE() write_via_reg(VIA1, vIER, 0x84) 128 #define ADB_VIA_INTR_DISABLE() write_via_reg(VIA1, vIER, 0x04) 129 #define ADB_INTR_IS_OFF (vPB3 == (read_via_reg(VIA1, vBufB) & vPB3)) 130 #define ADB_INTR_IS_ON (0 == (read_via_reg(VIA1, vBufB) & vPB3)) 131 #define ADB_SR_INTR_IS_OFF (0 == (read_via_reg(VIA1, vIFR) & vSR_INT)) 132 #define ADB_SR_INTR_IS_ON (vSR_INT == (read_via_reg(VIA1, \ 133 vIFR) & vSR_INT)) 134 135 /* 136 * This is the delay that is required (in uS) between certain 137 * ADB transactions. The actual timing delay for each uS is 138 * calculated at boot time to account for differences in machine speed. 139 */ 140 #define ADB_DELAY 150 141 142 /* 143 * Maximum ADB message length; includes space for data, result, and 144 * device code - plus a little for safety. 145 */ 146 #define ADB_MAX_MSG_LENGTH 16 147 #define ADB_MAX_HDR_LENGTH 8 148 149 #define ADB_QUEUE 32 150 #define ADB_TICKLE_TICKS 4 151 152 /* 153 * A structure for storing information about each ADB device. 154 */ 155 struct ADBDevEntry { 156 void (*ServiceRtPtr)(void); 157 void *DataAreaAddr; 158 int devType; 159 int origAddr; 160 int currentAddr; 161 }; 162 163 /* 164 * Used to hold ADB commands that are waiting to be sent out. 165 */ 166 struct adbCmdHoldEntry { 167 u_char outBuf[ADB_MAX_MSG_LENGTH]; /* our message */ 168 u_char *saveBuf; /* buffer to know where to save result */ 169 adbComp *compRout; /* completion routine pointer */ 170 int *data; /* completion routine data pointer */ 171 }; 172 173 /* 174 * Eventually used for two separate queues, the queue between 175 * the upper and lower halves, and the outgoing packet queue. 176 * TO DO: adbCommand can replace all of adbCmdHoldEntry eventually 177 */ 178 struct adbCommand { 179 u_char header[ADB_MAX_HDR_LENGTH]; /* not used yet */ 180 u_char data[ADB_MAX_MSG_LENGTH]; /* packet data only */ 181 u_char *saveBuf; /* where to save result */ 182 adbComp *compRout; /* completion routine pointer */ 183 volatile int *compData; /* completion routine data pointer */ 184 u_int cmd; /* the original command for this data */ 185 u_int unsol; /* 1 if packet was unsolicited */ 186 u_int ack_only; /* 1 for no special processing */ 187 }; 188 189 /* 190 * A few variables that we need and their initial values. 191 */ 192 int adbHardware = ADB_HW_UNKNOWN; 193 int adbActionState = ADB_ACTION_NOTREADY; 194 int adbWaiting = 0; /* waiting for return data from the device */ 195 int adbWriteDelay = 0; /* working on (or waiting to do) a write */ 196 197 int adbWaitingCmd = 0; /* ADB command we are waiting for */ 198 u_char *adbBuffer = (long)0; /* pointer to user data area */ 199 adbComp *adbCompRout = NULL; /* pointer to the completion routine */ 200 volatile int *adbCompData = NULL; /* pointer to the completion routine data */ 201 int adbStarting = 1; /* doing ADBReInit so do polling differently */ 202 203 u_char adbInputBuffer[ADB_MAX_MSG_LENGTH]; /* data input buffer */ 204 u_char adbOutputBuffer[ADB_MAX_MSG_LENGTH]; /* data output buffer */ 205 206 int adbSentChars = 0; /* how many characters we have sent */ 207 208 struct ADBDevEntry ADBDevTable[16]; /* our ADB device table */ 209 int ADBNumDevices; /* num. of ADB devices found with ADBReInit */ 210 211 struct adbCommand adbInbound[ADB_QUEUE]; /* incoming queue */ 212 int adbInCount = 0; /* how many packets in in queue */ 213 int adbInHead = 0; /* head of in queue */ 214 int adbInTail = 0; /* tail of in queue */ 215 struct adbCommand adbOutbound[ADB_QUEUE]; /* outgoing queue - not used yet */ 216 int adbOutCount = 0; /* how many packets in out queue */ 217 int adbOutHead = 0; /* head of out queue */ 218 int adbOutTail = 0; /* tail of out queue */ 219 220 int tickle_count = 0; /* how many tickles seen for this packet? */ 221 int tickle_serial = 0; /* the last packet tickled */ 222 int adb_cuda_serial = 0; /* the current packet */ 223 224 struct callout adb_cuda_tickle_ch; 225 struct callout adb_soft_intr_ch; 226 227 volatile uint8_t *Via1Base; 228 extern int adb_polling; /* Are we polling? */ 229 230 void pm_setup_adb(void); 231 void pm_check_adb_devices(int); 232 int pm_adb_op(u_char *, void *, volatile void *, int); 233 void pm_init_adb_device(void); 234 235 /* 236 * The following are private routines. 237 */ 238 #ifdef ADB_DEBUG 239 void print_single(u_char *); 240 #endif 241 void adb_soft_intr(void); 242 int send_adb_cuda(u_char *, u_char *, adbComp *, volatile void *, int); 243 void adb_intr_cuda_test(void); 244 void adb_cuda_tickle(void); 245 void adb_pass_up(struct adbCommand *); 246 void adb_op_comprout(void *, volatile int *, int); 247 void adb_reinit(void); 248 int count_adbs(void); 249 int get_ind_adb_info(ADBDataBlock *, int); 250 int get_adb_info(ADBDataBlock *, int); 251 int set_adb_info(ADBSetInfoBlock *, int); 252 void adb_setup_hw_type(void); 253 int adb_op (Ptr, adbComp *, volatile void *, short); 254 int adb_op_sync(Ptr, adbComp *, Ptr, short); 255 void adb_hw_setup(void); 256 int adb_cmd_result(u_char *); 257 int adb_cmd_extra(u_char *); 258 /* we should create this and it will be the public version */ 259 int send_adb(u_char *, void *, void *); 260 261 int setsoftadb(void); 262 263 #ifdef ADB_DEBUG 264 /* 265 * print_single 266 * Diagnostic display routine. Displays the hex values of the 267 * specified elements of the u_char. The length of the "string" 268 * is in [0]. 269 */ 270 void 271 print_single(u_char *str) 272 { 273 int x; 274 275 if (str == 0) { 276 printf_intr("no data - null pointer\n"); 277 return; 278 } 279 if (*str == 0) { 280 printf_intr("nothing returned\n"); 281 return; 282 } 283 if (*str > 20) { 284 printf_intr("ADB: ACK > 20 no way!\n"); 285 *str = 20; 286 } 287 printf_intr("(length=0x%x):", *str); 288 for (x = 1; x <= *str; x++) 289 printf_intr(" 0x%02x", str[x]); 290 printf_intr("\n"); 291 } 292 #endif 293 294 void 295 adb_cuda_tickle(void) 296 { 297 volatile int s; 298 299 if (adbActionState == ADB_ACTION_IN) { 300 if (tickle_serial == adb_cuda_serial) { 301 if (++tickle_count > 0) { 302 s = splhigh(); 303 adbActionState = ADB_ACTION_IDLE; 304 adbInputBuffer[0] = 0; 305 ADB_SET_STATE_IDLE_CUDA(); 306 splx(s); 307 } 308 } else { 309 tickle_serial = adb_cuda_serial; 310 tickle_count = 0; 311 } 312 } else { 313 tickle_serial = adb_cuda_serial; 314 tickle_count = 0; 315 } 316 317 callout_reset(&adb_cuda_tickle_ch, ADB_TICKLE_TICKS, 318 (void *)adb_cuda_tickle, NULL); 319 } 320 321 /* 322 * called when an adb interrupt happens 323 * 324 * Cuda version of adb_intr 325 * TO DO: do we want to add some calls to intr_dispatch() here to 326 * grab serial interrupts? 327 */ 328 int 329 adb_intr_cuda(void *arg) 330 { 331 volatile int i, ending; 332 volatile unsigned int s; 333 struct adbCommand packet; 334 uint8_t reg; 335 336 s = splhigh(); /* can't be too careful - might be called */ 337 /* from a routine, NOT an interrupt */ 338 339 reg = read_via_reg(VIA1, vIFR); /* Read the interrupts */ 340 if ((reg & 0x80) == 0) { 341 splx(s); 342 return 0; /* No interrupts to process */ 343 } 344 345 write_via_reg(VIA1, vIFR, reg & 0x7f); /* Clear 'em */ 346 347 ADB_VIA_INTR_DISABLE(); /* disable ADB interrupt on IIs. */ 348 349 switch_start: 350 switch (adbActionState) { 351 case ADB_ACTION_IDLE: 352 /* 353 * This is an unexpected packet, so grab the first (dummy) 354 * byte, set up the proper vars, and tell the chip we are 355 * starting to receive the packet by setting the TIP bit. 356 */ 357 adbInputBuffer[1] = ADB_SR(); 358 adb_cuda_serial++; 359 if (ADB_INTR_IS_OFF) /* must have been a fake start */ 360 break; 361 362 ADB_SET_SR_INPUT(); 363 ADB_SET_STATE_TIP(); 364 365 adbInputBuffer[0] = 1; 366 adbActionState = ADB_ACTION_IN; 367 #ifdef ADB_DEBUG 368 if (adb_debug) 369 printf_intr("idle 0x%02x ", adbInputBuffer[1]); 370 #endif 371 break; 372 373 case ADB_ACTION_IN: 374 adbInputBuffer[++adbInputBuffer[0]] = ADB_SR(); 375 /* intr off means this is the last byte (end of frame) */ 376 if (ADB_INTR_IS_OFF) 377 ending = 1; 378 else 379 ending = 0; 380 381 if (1 == ending) { /* end of message? */ 382 #ifdef ADB_DEBUG 383 if (adb_debug) { 384 printf_intr("in end 0x%02x ", 385 adbInputBuffer[adbInputBuffer[0]]); 386 print_single(adbInputBuffer); 387 } 388 #endif 389 390 /* 391 * Are we waiting AND does this packet match what we 392 * are waiting for AND is it coming from either the 393 * ADB or RTC/PRAM sub-device? This section _should_ 394 * recognize all ADB and RTC/PRAM type commands, but 395 * there may be more... NOTE: commands are always at 396 * [4], even for RTC/PRAM commands. 397 */ 398 /* set up data for adb_pass_up */ 399 memcpy(packet.data, adbInputBuffer, adbInputBuffer[0] + 1); 400 401 if ((adbWaiting == 1) && 402 (adbInputBuffer[4] == adbWaitingCmd) && 403 ((adbInputBuffer[2] == 0x00) || 404 (adbInputBuffer[2] == 0x01))) { 405 packet.saveBuf = adbBuffer; 406 packet.compRout = adbCompRout; 407 packet.compData = adbCompData; 408 packet.unsol = 0; 409 packet.ack_only = 0; 410 adb_pass_up(&packet); 411 412 adbWaitingCmd = 0; /* reset "waiting" vars */ 413 adbWaiting = 0; 414 adbBuffer = (long)0; 415 adbCompRout = (long)0; 416 adbCompData = (long)0; 417 } else { 418 packet.unsol = 1; 419 packet.ack_only = 0; 420 adb_pass_up(&packet); 421 } 422 423 424 /* reset vars and signal the end of this frame */ 425 adbActionState = ADB_ACTION_IDLE; 426 adbInputBuffer[0] = 0; 427 ADB_SET_STATE_IDLE_CUDA(); 428 /*ADB_SET_SR_INPUT();*/ 429 430 /* 431 * If there is something waiting to be sent out, 432 * the set everything up and send the first byte. 433 */ 434 if (adbWriteDelay == 1) { 435 delay(ADB_DELAY); /* required */ 436 adbSentChars = 0; 437 adbActionState = ADB_ACTION_OUT; 438 /* 439 * If the interrupt is on, we were too slow 440 * and the chip has already started to send 441 * something to us, so back out of the write 442 * and start a read cycle. 443 */ 444 if (ADB_INTR_IS_ON) { 445 ADB_SET_SR_INPUT(); 446 ADB_SET_STATE_IDLE_CUDA(); 447 adbSentChars = 0; 448 adbActionState = ADB_ACTION_IDLE; 449 adbInputBuffer[0] = 0; 450 break; 451 } 452 /* 453 * If we got here, it's ok to start sending 454 * so load the first byte and tell the chip 455 * we want to send. 456 */ 457 ADB_SET_STATE_TIP(); 458 ADB_SET_SR_OUTPUT(); 459 write_via_reg(VIA1, vSR, adbOutputBuffer[adbSentChars + 1]); 460 } 461 } else { 462 ADB_TOGGLE_STATE_ACK_CUDA(); 463 #ifdef ADB_DEBUG 464 if (adb_debug) 465 printf_intr("in 0x%02x ", 466 adbInputBuffer[adbInputBuffer[0]]); 467 #endif 468 } 469 break; 470 471 case ADB_ACTION_OUT: 472 i = ADB_SR(); /* reset SR-intr in IFR */ 473 #ifdef ADB_DEBUG 474 if (adb_debug) 475 printf_intr("intr out 0x%02x ", i); 476 #endif 477 478 adbSentChars++; 479 if (ADB_INTR_IS_ON) { /* ADB intr low during write */ 480 #ifdef ADB_DEBUG 481 if (adb_debug) 482 printf_intr("intr was on "); 483 #endif 484 ADB_SET_SR_INPUT(); /* make sure SR is set to IN */ 485 ADB_SET_STATE_IDLE_CUDA(); 486 adbSentChars = 0; /* must start all over */ 487 adbActionState = ADB_ACTION_IDLE; /* new state */ 488 adbInputBuffer[0] = 0; 489 adbWriteDelay = 1; /* must retry when done with 490 * read */ 491 delay(ADB_DELAY); 492 goto switch_start; /* process next state right 493 * now */ 494 break; 495 } 496 if (adbOutputBuffer[0] == adbSentChars) { /* check for done */ 497 if (0 == adb_cmd_result(adbOutputBuffer)) { /* do we expect data 498 * back? */ 499 adbWaiting = 1; /* signal waiting for return */ 500 adbWaitingCmd = adbOutputBuffer[2]; /* save waiting command */ 501 } else { /* no talk, so done */ 502 /* set up stuff for adb_pass_up */ 503 memcpy(packet.data, adbInputBuffer, adbInputBuffer[0] + 1); 504 packet.saveBuf = adbBuffer; 505 packet.compRout = adbCompRout; 506 packet.compData = adbCompData; 507 packet.cmd = adbWaitingCmd; 508 packet.unsol = 0; 509 packet.ack_only = 1; 510 adb_pass_up(&packet); 511 512 /* reset "waiting" vars, just in case */ 513 adbWaitingCmd = 0; 514 adbBuffer = (long)0; 515 adbCompRout = NULL; 516 adbCompData = NULL; 517 } 518 519 adbWriteDelay = 0; /* done writing */ 520 adbActionState = ADB_ACTION_IDLE; /* signal bus is idle */ 521 ADB_SET_SR_INPUT(); 522 ADB_SET_STATE_IDLE_CUDA(); 523 #ifdef ADB_DEBUG 524 if (adb_debug) 525 printf_intr("write done "); 526 #endif 527 } else { 528 write_via_reg(VIA1, vSR, adbOutputBuffer[adbSentChars + 1]); /* send next byte */ 529 ADB_TOGGLE_STATE_ACK_CUDA(); /* signal byte ready to 530 * shift */ 531 #ifdef ADB_DEBUG 532 if (adb_debug) 533 printf_intr("toggle "); 534 #endif 535 } 536 break; 537 538 case ADB_ACTION_NOTREADY: 539 #ifdef ADB_DEBUG 540 if (adb_debug) 541 printf_intr("adb: not yet initialized\n"); 542 #endif 543 break; 544 545 default: 546 #ifdef ADB_DEBUG 547 if (adb_debug) 548 printf_intr("intr: unknown ADB state\n"); 549 #endif 550 break; 551 } 552 553 ADB_VIA_INTR_ENABLE(); /* enable ADB interrupt on IIs. */ 554 555 splx(s); /* restore */ 556 557 return 1; 558 } /* end adb_intr_cuda */ 559 560 561 int 562 send_adb_cuda(u_char * in, u_char * buffer, adbComp *compRout, 563 volatile void *data, int command) 564 { 565 int s, len; 566 567 #ifdef ADB_DEBUG 568 if (adb_debug) 569 printf_intr("SEND\n"); 570 #endif 571 572 if (adbActionState == ADB_ACTION_NOTREADY) 573 return 1; 574 575 /* Don't interrupt while we are messing with the ADB */ 576 s = splhigh(); 577 578 if ((adbActionState == ADB_ACTION_IDLE) && /* ADB available? */ 579 (ADB_INTR_IS_OFF)) { /* and no incoming interrupt? */ 580 } else 581 if (adbWriteDelay == 0) /* it's busy, but is anything waiting? */ 582 adbWriteDelay = 1; /* if no, then we'll "queue" 583 * it up */ 584 else { 585 splx(s); 586 return 1; /* really busy! */ 587 } 588 589 #ifdef ADB_DEBUG 590 if (adb_debug) 591 printf_intr("QUEUE\n"); 592 #endif 593 if ((long)in == (long)0) { /* need to convert? */ 594 /* 595 * Don't need to use adb_cmd_extra here because this section 596 * will be called ONLY when it is an ADB command (no RTC or 597 * PRAM) 598 */ 599 if ((command & 0x0c) == 0x08) /* copy addl data ONLY if 600 * doing a listen! */ 601 len = buffer[0]; /* length of additional data */ 602 else 603 len = 0;/* no additional data */ 604 605 adbOutputBuffer[0] = 2 + len; /* dev. type + command + addl. 606 * data */ 607 adbOutputBuffer[1] = 0x00; /* mark as an ADB command */ 608 adbOutputBuffer[2] = (u_char)command; /* load command */ 609 610 /* copy additional output data, if any */ 611 memcpy(adbOutputBuffer + 3, buffer + 1, len); 612 } else 613 /* if data ready, just copy over */ 614 memcpy(adbOutputBuffer, in, in[0] + 2); 615 616 adbSentChars = 0; /* nothing sent yet */ 617 adbBuffer = buffer; /* save buffer to know where to save result */ 618 adbCompRout = compRout; /* save completion routine pointer */ 619 adbCompData = data; /* save completion routine data pointer */ 620 adbWaitingCmd = adbOutputBuffer[2]; /* save wait command */ 621 622 if (adbWriteDelay != 1) { /* start command now? */ 623 #ifdef ADB_DEBUG 624 if (adb_debug) 625 printf_intr("out start NOW"); 626 #endif 627 delay(ADB_DELAY); 628 adbActionState = ADB_ACTION_OUT; /* set next state */ 629 ADB_SET_SR_OUTPUT(); /* set shift register for OUT */ 630 write_via_reg(VIA1, vSR, adbOutputBuffer[adbSentChars + 1]); /* load byte for output */ 631 ADB_SET_STATE_ACKOFF_CUDA(); 632 ADB_SET_STATE_TIP(); /* tell ADB that we want to send */ 633 } 634 adbWriteDelay = 1; /* something in the write "queue" */ 635 636 splx(s); 637 638 if ((s & (1 << 18)) || adb_polling) /* XXX were VIA1 interrupts blocked ? */ 639 /* poll until byte done */ 640 while ((adbActionState != ADB_ACTION_IDLE) || (ADB_INTR_IS_ON) 641 || (adbWaiting == 1)) 642 if (ADB_SR_INTR_IS_ON) { /* wait for "interrupt" */ 643 adb_intr_cuda(NULL); /* process it */ 644 adb_soft_intr(); 645 } 646 647 return 0; 648 } /* send_adb_cuda */ 649 650 int 651 adb_intr(void *arg) 652 { 653 switch (adbHardware) { 654 case ADB_HW_PMU: 655 return pm_intr(arg); 656 break; 657 658 case ADB_HW_CUDA: 659 return adb_intr_cuda(arg); 660 break; 661 662 case ADB_HW_UNKNOWN: 663 break; 664 } 665 return 0; 666 } 667 668 669 /* 670 * adb_pass_up is called by the interrupt-time routines. 671 * It takes the raw packet data that was received from the 672 * device and puts it into the queue that the upper half 673 * processes. It then signals for a soft ADB interrupt which 674 * will eventually call the upper half routine (adb_soft_intr). 675 * 676 * If in->unsol is 0, then this is either the notification 677 * that the packet was sent (on a LISTEN, for example), or the 678 * response from the device (on a TALK). The completion routine 679 * is called only if the user specified one. 680 * 681 * If in->unsol is 1, then this packet was unsolicited and 682 * so we look up the device in the ADB device table to determine 683 * what its default service routine is. 684 * 685 * If in->ack_only is 1, then we really only need to call 686 * the completion routine, so don't do any other stuff. 687 * 688 * Note that in->data contains the packet header AND data, 689 * while adbInbound[]->data contains ONLY data. 690 * 691 * Note: Called only at interrupt time. Assumes this. 692 */ 693 void 694 adb_pass_up(struct adbCommand *in) 695 { 696 int start = 0, len = 0, cmd = 0; 697 ADBDataBlock block; 698 699 /* temp for testing */ 700 /*u_char *buffer = 0;*/ 701 /*u_char *compdata = 0;*/ 702 /*u_char *comprout = 0;*/ 703 704 if (adbInCount >= ADB_QUEUE) { 705 #ifdef ADB_DEBUG 706 if (adb_debug) 707 printf_intr("adb: ring buffer overflow\n"); 708 #endif 709 return; 710 } 711 712 if (in->ack_only) { 713 len = in->data[0]; 714 cmd = in->cmd; 715 start = 0; 716 } else { 717 switch (adbHardware) { 718 case ADB_HW_CUDA: 719 /* If it's unsolicited, accept only ADB data for now */ 720 if (in->unsol) 721 if (0 != in->data[2]) 722 return; 723 cmd = in->data[4]; 724 if (in->data[0] < 5) 725 len = 0; 726 else 727 len = in->data[0]-4; 728 start = 4; 729 break; 730 731 case ADB_HW_PMU: 732 cmd = in->data[1]; 733 if (in->data[0] < 2) 734 len = 0; 735 else 736 len = in->data[0]-1; 737 start = 1; 738 break; 739 740 case ADB_HW_UNKNOWN: 741 return; 742 } 743 744 /* Make sure there is a valid device entry for this device */ 745 if (in->unsol) { 746 /* ignore unsolicited data during adbreinit */ 747 if (adbStarting) 748 return; 749 /* get device's comp. routine and data area */ 750 if (-1 == get_adb_info(&block, ADB_CMDADDR(cmd))) 751 return; 752 } 753 } 754 755 /* 756 * If this is an unsolicited packet, we need to fill in 757 * some info so adb_soft_intr can process this packet 758 * properly. If it's not unsolicited, then use what 759 * the caller sent us. 760 */ 761 if (in->unsol) { 762 adbInbound[adbInTail].compRout = (void *)block.dbServiceRtPtr; 763 adbInbound[adbInTail].compData = (void *)block.dbDataAreaAddr; 764 adbInbound[adbInTail].saveBuf = (void *)adbInbound[adbInTail].data; 765 } else { 766 adbInbound[adbInTail].compRout = in->compRout; 767 adbInbound[adbInTail].compData = in->compData; 768 adbInbound[adbInTail].saveBuf = in->saveBuf; 769 } 770 771 #ifdef ADB_DEBUG 772 if (adb_debug && in->data[1] == 2) 773 printf_intr("adb: caught error\n"); 774 #endif 775 776 /* copy the packet data over */ 777 /* 778 * TO DO: If the *_intr routines fed their incoming data 779 * directly into an adbCommand struct, which is passed to 780 * this routine, then we could eliminate this copy. 781 */ 782 memcpy(adbInbound[adbInTail].data + 1, in->data + start + 1, len); 783 adbInbound[adbInTail].data[0] = len; 784 adbInbound[adbInTail].cmd = cmd; 785 786 adbInCount++; 787 if (++adbInTail >= ADB_QUEUE) 788 adbInTail = 0; 789 790 /* 791 * If the debugger is running, call upper half manually. 792 * Otherwise, trigger a soft interrupt to handle the rest later. 793 */ 794 if (adb_polling) 795 adb_soft_intr(); 796 else 797 setsoftadb(); 798 799 return; 800 } 801 802 803 /* 804 * Called to process the packets after they have been 805 * placed in the incoming queue. 806 * 807 */ 808 void 809 adb_soft_intr(void) 810 { 811 int s; 812 int cmd = 0; 813 u_char *buffer = 0; 814 adbComp *comprout = NULL; 815 volatile int *compdata = 0; 816 817 #if 0 818 s = splhigh(); 819 printf_intr("sr: %x\n", (s & 0x0700)); 820 splx(s); 821 #endif 822 823 /*delay(2*ADB_DELAY);*/ 824 825 while (adbInCount) { 826 #ifdef ADB_DEBUG 827 if (adb_debug & 0x80) 828 printf_intr("%x %x %x ", 829 adbInCount, adbInHead, adbInTail); 830 #endif 831 /* get the data we need from the queue */ 832 buffer = adbInbound[adbInHead].saveBuf; 833 comprout = adbInbound[adbInHead].compRout; 834 compdata = adbInbound[adbInHead].compData; 835 cmd = adbInbound[adbInHead].cmd; 836 837 /* copy over data to data area if it's valid */ 838 /* 839 * Note that for unsol packets we don't want to copy the 840 * data anywhere, so buffer was already set to 0. 841 * For ack_only buffer was set to 0, so don't copy. 842 */ 843 if (buffer) 844 memcpy(buffer, adbInbound[adbInHead].data, 845 adbInbound[adbInHead].data[0] + 1); 846 847 #ifdef ADB_DEBUG 848 if (adb_debug & 0x80) { 849 printf_intr("%p %p %p %x ", 850 buffer, comprout, compdata, (short)cmd); 851 printf_intr("buf: "); 852 print_single(adbInbound[adbInHead].data); 853 } 854 #endif 855 /* Remove the packet from the queue before calling 856 * the completion routine, so that the completion 857 * routine can reentrantly process the queue. For 858 * example, this happens when polling is turned on 859 * by entering the debugger by keystroke. 860 */ 861 s = splhigh(); 862 adbInCount--; 863 if (++adbInHead >= ADB_QUEUE) 864 adbInHead = 0; 865 splx(s); 866 867 /* call default completion routine if it's valid */ 868 if (comprout) 869 (*comprout)(buffer, compdata, cmd); 870 } 871 return; 872 } 873 874 875 /* 876 * This is my version of the ADBOp routine. It mainly just calls the 877 * hardware-specific routine. 878 * 879 * data : pointer to data area to be used by compRout 880 * compRout : completion routine 881 * buffer : for LISTEN: points to data to send - MAX 8 data bytes, 882 * byte 0 = # of bytes 883 * : for TALK: points to place to save return data 884 * command : the adb command to send 885 * result : 0 = success 886 * : -1 = could not complete 887 */ 888 int 889 adb_op(Ptr buffer, adbComp *compRout, volatile void *data, short command) 890 { 891 int result; 892 893 switch (adbHardware) { 894 case ADB_HW_PMU: 895 result = pm_adb_op((u_char *)buffer, compRout, 896 data, (int)command); 897 898 if (result == 0) 899 return 0; 900 else 901 return -1; 902 break; 903 904 case ADB_HW_CUDA: 905 result = send_adb_cuda((u_char *)0, (u_char *)buffer, 906 compRout, data, (int)command); 907 if (result == 0) 908 return 0; 909 else 910 return -1; 911 break; 912 913 case ADB_HW_UNKNOWN: 914 default: 915 return -1; 916 } 917 } 918 919 920 /* 921 * adb_hw_setup 922 * This routine sets up the possible machine specific hardware 923 * config (mainly VIA settings) for the various models. 924 */ 925 void 926 adb_hw_setup(void) 927 { 928 volatile int i; 929 930 switch (adbHardware) { 931 case ADB_HW_PMU: 932 /* 933 * XXX - really PM_VIA_CLR_INTR - should we put it in 934 * pm_direct.h? 935 */ 936 write_via_reg(VIA1, vIFR, 0x90); /* clear interrupt */ 937 break; 938 939 case ADB_HW_CUDA: 940 via_reg_or(VIA1, vDirB, 0x30); /* register B bits 4 and 5: 941 * outputs */ 942 via_reg_and(VIA1, vDirB, 0xf7); /* register B bit 3: input */ 943 via_reg_and(VIA1, vACR, ~vSR_OUT); /* make sure SR is set 944 * to IN */ 945 write_via_reg(VIA1, vACR, (read_via_reg(VIA1, vACR) | 0x0c) & ~0x10); 946 adbActionState = ADB_ACTION_IDLE; /* used by all types of 947 * hardware */ 948 write_via_reg(VIA1, vIER, 0x84);/* make sure VIA interrupts 949 * are on */ 950 ADB_SET_STATE_IDLE_CUDA(); /* set ADB bus state to idle */ 951 952 /* sort of a device reset */ 953 i = ADB_SR(); /* clear interrupt */ 954 ADB_VIA_INTR_DISABLE(); /* no interrupts while clearing */ 955 ADB_SET_STATE_IDLE_CUDA(); /* reset state to idle */ 956 delay(ADB_DELAY); 957 ADB_SET_STATE_TIP(); /* signal start of frame */ 958 delay(ADB_DELAY); 959 ADB_TOGGLE_STATE_ACK_CUDA(); 960 delay(ADB_DELAY); 961 ADB_CLR_STATE_TIP(); 962 delay(ADB_DELAY); 963 ADB_SET_STATE_IDLE_CUDA(); /* back to idle state */ 964 i = ADB_SR(); /* clear interrupt */ 965 ADB_VIA_INTR_ENABLE(); /* ints ok now */ 966 break; 967 968 case ADB_HW_UNKNOWN: 969 default: 970 write_via_reg(VIA1, vIER, 0x04);/* turn interrupts off - TO 971 * DO: turn PB ints off? */ 972 return; 973 break; 974 } 975 } 976 977 /* 978 * adb_reinit sets up the adb stuff 979 * 980 */ 981 void 982 adb_reinit(void) 983 { 984 u_char send_string[ADB_MAX_MSG_LENGTH]; 985 ADBDataBlock data; /* temp. holder for getting device info */ 986 volatile int i, x; 987 int s = 0; /* XXX: gcc */ 988 int command; 989 int result; 990 int saveptr; /* point to next free relocation address */ 991 int device; 992 int nonewtimes; /* times thru loop w/o any new devices */ 993 static bool callo; 994 995 if (!callo) { 996 callo = true; 997 callout_init(&adb_cuda_tickle_ch, 0); 998 callout_init(&adb_soft_intr_ch, 0); 999 } 1000 1001 /* Make sure we are not interrupted while building the table. */ 1002 if (adbHardware != ADB_HW_PMU) /* ints must be on for PMU? */ 1003 s = splhigh(); 1004 1005 ADBNumDevices = 0; /* no devices yet */ 1006 1007 /* Let intr routines know we are running reinit */ 1008 adbStarting = 1; 1009 1010 /* 1011 * Initialize the ADB table. For now, we'll always use the same table 1012 * that is defined at the beginning of this file - no mallocs. 1013 */ 1014 for (i = 0; i < 16; i++) 1015 ADBDevTable[i].devType = 0; 1016 1017 adb_setup_hw_type(); /* setup hardware type */ 1018 1019 adb_hw_setup(); /* init the VIA bits and hard reset ADB */ 1020 1021 delay(1000); 1022 1023 /* send an ADB reset first */ 1024 result = adb_op_sync((Ptr)0, NULL, (Ptr)0, (short)0x00); 1025 delay(200000); 1026 1027 #ifdef ADB_DEBUG 1028 if (result && adb_debug) { 1029 printf_intr("adb_reinit: failed to reset, result = %d\n",result); 1030 } 1031 #endif 1032 1033 /* 1034 * Probe for ADB devices. Probe devices 1-15 quickly to determine 1035 * which device addresses are in use and which are free. For each 1036 * address that is in use, move the device at that address to a higher 1037 * free address. Continue doing this at that address until no device 1038 * responds at that address. Then move the last device that was moved 1039 * back to the original address. Do this for the remaining addresses 1040 * that we determined were in use. 1041 * 1042 * When finished, do this entire process over again with the updated 1043 * list of in use addresses. Do this until no new devices have been 1044 * found in 20 passes though the in use address list. (This probably 1045 * seems long and complicated, but it's the best way to detect multiple 1046 * devices at the same address - sometimes it takes a couple of tries 1047 * before the collision is detected.) 1048 */ 1049 1050 /* initial scan through the devices */ 1051 for (i = 1; i < 16; i++) { 1052 send_string[0] = 0; 1053 command = ADBTALK(i, 3); 1054 result = adb_op_sync((Ptr)send_string, NULL, 1055 (Ptr)0, (short)command); 1056 1057 #ifdef ADB_DEBUG 1058 if (result && adb_debug) { 1059 printf_intr("adb_reinit: scan of device %d, result = %d, str = 0x%x\n", 1060 i,result,send_string[0]); 1061 } 1062 #endif 1063 1064 if (send_string[0] != 0) { 1065 /* check for valid device handler */ 1066 switch (send_string[2]) { 1067 case 0: 1068 case 0xfd: 1069 case 0xfe: 1070 case 0xff: 1071 continue; /* invalid, skip */ 1072 } 1073 1074 /* found a device */ 1075 ++ADBNumDevices; 1076 KASSERT(ADBNumDevices < 16); 1077 ADBDevTable[ADBNumDevices].devType = 1078 (int)send_string[2]; 1079 ADBDevTable[ADBNumDevices].origAddr = i; 1080 ADBDevTable[ADBNumDevices].currentAddr = i; 1081 ADBDevTable[ADBNumDevices].DataAreaAddr = 1082 (long)0; 1083 ADBDevTable[ADBNumDevices].ServiceRtPtr = (void *)0; 1084 pm_check_adb_devices(i); /* tell pm driver device 1085 * is here */ 1086 } 1087 } 1088 1089 /* find highest unused address */ 1090 for (saveptr = 15; saveptr > 0; saveptr--) 1091 if (-1 == get_adb_info(&data, saveptr)) 1092 break; 1093 1094 #ifdef ADB_DEBUG 1095 if (adb_debug & 0x80) { 1096 printf_intr("first free is: 0x%02x\n", saveptr); 1097 printf_intr("devices: %i\n", ADBNumDevices); 1098 } 1099 #endif 1100 1101 nonewtimes = 0; /* no loops w/o new devices */ 1102 while (saveptr > 0 && nonewtimes++ < 11) { 1103 for (i = 1; i <= ADBNumDevices; i++) { 1104 device = ADBDevTable[i].currentAddr; 1105 #ifdef ADB_DEBUG 1106 if (adb_debug & 0x80) 1107 printf_intr("moving device 0x%02x to 0x%02x " 1108 "(index 0x%02x) ", device, saveptr, i); 1109 #endif 1110 1111 /* send TALK R3 to address */ 1112 command = ADBTALK(device, 3); 1113 adb_op_sync((Ptr)send_string, NULL, 1114 (Ptr)0, (short)command); 1115 1116 /* move device to higher address */ 1117 command = ADBLISTEN(device, 3); 1118 send_string[0] = 2; 1119 send_string[1] = (u_char)(saveptr | 0x60); 1120 send_string[2] = 0xfe; 1121 adb_op_sync((Ptr)send_string, NULL, 1122 (Ptr)0, (short)command); 1123 delay(500); 1124 1125 /* send TALK R3 - anything at new address? */ 1126 command = ADBTALK(saveptr, 3); 1127 adb_op_sync((Ptr)send_string, NULL, 1128 (Ptr)0, (short)command); 1129 delay(500); 1130 1131 if (send_string[0] == 0) { 1132 #ifdef ADB_DEBUG 1133 if (adb_debug & 0x80) 1134 printf_intr("failed, continuing\n"); 1135 #endif 1136 continue; 1137 } 1138 1139 /* send TALK R3 - anything at old address? */ 1140 command = ADBTALK(device, 3); 1141 result = adb_op_sync((Ptr)send_string, NULL, 1142 (Ptr)0, (short)command); 1143 if (send_string[0] != 0) { 1144 /* check for valid device handler */ 1145 switch (send_string[2]) { 1146 case 0: 1147 case 0xfd: 1148 case 0xfe: 1149 case 0xff: 1150 continue; /* invalid, skip */ 1151 } 1152 1153 /* new device found */ 1154 /* update data for previously moved device */ 1155 ADBDevTable[i].currentAddr = saveptr; 1156 #ifdef ADB_DEBUG 1157 if (adb_debug & 0x80) 1158 printf_intr("old device at index %i\n",i); 1159 #endif 1160 /* add new device in table */ 1161 #ifdef ADB_DEBUG 1162 if (adb_debug & 0x80) 1163 printf_intr("new device found\n"); 1164 #endif 1165 if (saveptr > ADBNumDevices) { 1166 ++ADBNumDevices; 1167 KASSERT(ADBNumDevices < 16); 1168 } 1169 ADBDevTable[ADBNumDevices].devType = 1170 (int)send_string[2]; 1171 ADBDevTable[ADBNumDevices].origAddr = device; 1172 ADBDevTable[ADBNumDevices].currentAddr = device; 1173 /* These will be set correctly in adbsys.c */ 1174 /* Until then, unsol. data will be ignored. */ 1175 ADBDevTable[ADBNumDevices].DataAreaAddr = 1176 (long)0; 1177 ADBDevTable[ADBNumDevices].ServiceRtPtr = 1178 (void *)0; 1179 /* find next unused address */ 1180 for (x = saveptr; x > 0; x--) { 1181 if (-1 == get_adb_info(&data, x)) { 1182 saveptr = x; 1183 break; 1184 } 1185 } 1186 if (x == 0) 1187 saveptr = 0; 1188 #ifdef ADB_DEBUG 1189 if (adb_debug & 0x80) 1190 printf_intr("new free is 0x%02x\n", 1191 saveptr); 1192 #endif 1193 nonewtimes = 0; 1194 /* tell pm driver device is here */ 1195 pm_check_adb_devices(device); 1196 } else { 1197 #ifdef ADB_DEBUG 1198 if (adb_debug & 0x80) 1199 printf_intr("moving back...\n"); 1200 #endif 1201 /* move old device back */ 1202 command = ADBLISTEN(saveptr, 3); 1203 send_string[0] = 2; 1204 send_string[1] = (u_char)(device | 0x60); 1205 send_string[2] = 0xfe; 1206 adb_op_sync((Ptr)send_string, NULL, 1207 (Ptr)0, (short)command); 1208 delay(1000); 1209 } 1210 } 1211 } 1212 1213 #ifdef ADB_DEBUG 1214 if (adb_debug) { 1215 for (i = 1; i <= ADBNumDevices; i++) { 1216 x = get_ind_adb_info(&data, i); 1217 if (x != -1) 1218 printf_intr("index 0x%x, addr 0x%x, type 0x%x\n", 1219 i, x, data.devType); 1220 } 1221 } 1222 #endif 1223 1224 #ifdef ADB_DEBUG 1225 if (adb_debug) { 1226 if (0 == ADBNumDevices) /* tell user if no devices found */ 1227 printf_intr("adb: no devices found\n"); 1228 } 1229 #endif 1230 1231 adbStarting = 0; /* not starting anymore */ 1232 #ifdef ADB_DEBUG 1233 if (adb_debug) 1234 printf_intr("adb: ADBReInit complete\n"); 1235 #endif 1236 1237 if (adbHardware == ADB_HW_CUDA) 1238 callout_reset(&adb_cuda_tickle_ch, ADB_TICKLE_TICKS, 1239 (void *)adb_cuda_tickle, NULL); 1240 1241 if (adbHardware != ADB_HW_PMU) /* ints must be on for PMU? */ 1242 splx(s); 1243 } 1244 1245 /* 1246 * adb_cmd_result 1247 * 1248 * This routine lets the caller know whether the specified adb command string 1249 * should expect a returned result, such as a TALK command. 1250 * 1251 * returns: 0 if a result should be expected 1252 * 1 if a result should NOT be expected 1253 */ 1254 int 1255 adb_cmd_result(u_char *in) 1256 { 1257 switch (adbHardware) { 1258 case ADB_HW_CUDA: 1259 /* was it an ADB talk command? */ 1260 if ((in[1] == 0x00) && ((in[2] & 0x0c) == 0x0c)) 1261 return 0; 1262 /* was it an RTC/PRAM read date/time? */ 1263 if ((in[1] == 0x01) && (in[2] == 0x03)) 1264 return 0; 1265 return 1; 1266 1267 case ADB_HW_PMU: 1268 return 1; 1269 1270 case ADB_HW_UNKNOWN: 1271 default: 1272 return 1; 1273 } 1274 } 1275 1276 1277 /* 1278 * adb_cmd_extra 1279 * 1280 * This routine lets the caller know whether the specified adb command string 1281 * may have extra data appended to the end of it, such as a LISTEN command. 1282 * 1283 * returns: 0 if extra data is allowed 1284 * 1 if extra data is NOT allowed 1285 */ 1286 int 1287 adb_cmd_extra(u_char *in) 1288 { 1289 switch (adbHardware) { 1290 case ADB_HW_CUDA: 1291 /* 1292 * TO DO: support needs to be added to recognize RTC and PRAM 1293 * commands 1294 */ 1295 if ((in[2] & 0x0c) == 0x08) /* was it a listen command? */ 1296 return 0; 1297 /* add others later */ 1298 return 1; 1299 1300 case ADB_HW_PMU: 1301 return 1; 1302 1303 case ADB_HW_UNKNOWN: 1304 default: 1305 return 1; 1306 } 1307 } 1308 1309 /* 1310 * adb_op_sync 1311 * 1312 * This routine does exactly what the adb_op routine does, except that after 1313 * the adb_op is called, it waits until the return value is present before 1314 * returning. 1315 * 1316 * NOTE: The user specified compRout is ignored, since this routine specifies 1317 * its own to adb_op, which is why you really called this in the first place 1318 * anyway. 1319 */ 1320 int 1321 adb_op_sync(Ptr buffer, adbComp *compRout, Ptr data, short command) 1322 { 1323 int tmout; 1324 int result; 1325 volatile int flag = 0; 1326 1327 result = adb_op(buffer, adb_op_comprout, 1328 &flag, command); /* send command */ 1329 if (result == 0) { /* send ok? */ 1330 /* 1331 * Total time to wait is calculated as follows: 1332 * - Tlt (stop to start time): 260 usec 1333 * - start bit: 100 usec 1334 * - up to 8 data bytes: 64 * 100 usec = 6400 usec 1335 * - stop bit (with SRQ): 140 usec 1336 * Total: 6900 usec 1337 * 1338 * This is the total time allowed by the specification. Any 1339 * device that doesn't conform to this will fail to operate 1340 * properly on some Apple systems. In spite of this we 1341 * double the time to wait; some Cuda-based apparently 1342 * queues some commands and allows the main CPU to continue 1343 * processing (radical concept, eh?). To be safe, allow 1344 * time for two complete ADB transactions to occur. 1345 */ 1346 for (tmout = 13800; !flag && tmout >= 10; tmout -= 10) 1347 delay(10); 1348 if (!flag && tmout > 0) 1349 delay(tmout); 1350 1351 if (!flag) 1352 result = -2; 1353 } 1354 1355 return result; 1356 } 1357 1358 /* 1359 * adb_op_comprout 1360 * 1361 * This function is used by the adb_op_sync routine so it knows when the 1362 * function is done. 1363 */ 1364 void 1365 adb_op_comprout(void *buffer, volatile int *compdata, int cmd) 1366 { 1367 volatile int *p = compdata; 1368 1369 *p = 1; 1370 } 1371 1372 void 1373 adb_setup_hw_type(void) 1374 { 1375 switch (adbHardware) { 1376 case ADB_HW_CUDA: 1377 return; 1378 1379 case ADB_HW_PMU: 1380 pm_setup_adb(); 1381 return; 1382 1383 default: 1384 panic("unknown adb hardware"); 1385 } 1386 } 1387 1388 int 1389 count_adbs(void) 1390 { 1391 int i; 1392 int found; 1393 1394 found = 0; 1395 1396 for (i = 1; i < 16; i++) 1397 if (0 != ADBDevTable[i].devType) 1398 found++; 1399 1400 return found; 1401 } 1402 1403 int 1404 get_ind_adb_info(ADBDataBlock * info, int index) 1405 { 1406 if ((index < 1) || (index > 15)) /* check range 1-15 */ 1407 return (-1); 1408 1409 #ifdef ADB_DEBUG 1410 if (adb_debug & 0x80) 1411 printf_intr("index 0x%x devType is: 0x%x\n", index, 1412 ADBDevTable[index].devType); 1413 #endif 1414 if (0 == ADBDevTable[index].devType) /* make sure it's a valid entry */ 1415 return (-1); 1416 1417 info->devType = ADBDevTable[index].devType; 1418 info->origADBAddr = ADBDevTable[index].origAddr; 1419 info->dbServiceRtPtr = (Ptr)ADBDevTable[index].ServiceRtPtr; 1420 info->dbDataAreaAddr = (Ptr)ADBDevTable[index].DataAreaAddr; 1421 1422 return (ADBDevTable[index].currentAddr); 1423 } 1424 1425 int 1426 get_adb_info(ADBDataBlock * info, int adbAddr) 1427 { 1428 int i; 1429 1430 if ((adbAddr < 1) || (adbAddr > 15)) /* check range 1-15 */ 1431 return (-1); 1432 1433 for (i = 1; i < 15; i++) 1434 if (ADBDevTable[i].currentAddr == adbAddr) { 1435 info->devType = ADBDevTable[i].devType; 1436 info->origADBAddr = ADBDevTable[i].origAddr; 1437 info->dbServiceRtPtr = (Ptr)ADBDevTable[i].ServiceRtPtr; 1438 info->dbDataAreaAddr = ADBDevTable[i].DataAreaAddr; 1439 return 0; /* found */ 1440 } 1441 1442 return (-1); /* not found */ 1443 } 1444 1445 int 1446 set_adb_info(ADBSetInfoBlock * info, int adbAddr) 1447 { 1448 int i; 1449 1450 if ((adbAddr < 1) || (adbAddr > 15)) /* check range 1-15 */ 1451 return (-1); 1452 1453 for (i = 1; i < 15; i++) 1454 if (ADBDevTable[i].currentAddr == adbAddr) { 1455 ADBDevTable[i].ServiceRtPtr = 1456 (void *)(info->siServiceRtPtr); 1457 ADBDevTable[i].DataAreaAddr = info->siDataAreaAddr; 1458 return 0; /* found */ 1459 } 1460 1461 return (-1); /* not found */ 1462 1463 } 1464 1465 #ifndef MRG_ADB 1466 1467 /* caller should really use machine-independent version: getPramTime */ 1468 /* this version does pseudo-adb access only */ 1469 int 1470 adb_read_date_time(unsigned long *t) 1471 { 1472 u_char output[ADB_MAX_MSG_LENGTH]; 1473 int result; 1474 volatile int flag = 0; 1475 1476 switch (adbHardware) { 1477 case ADB_HW_PMU: 1478 pm_read_date_time(t); 1479 return 0; 1480 1481 case ADB_HW_CUDA: 1482 output[0] = 0x02; /* 2 byte message */ 1483 output[1] = 0x01; /* to pram/rtc device */ 1484 output[2] = 0x03; /* read date/time */ 1485 result = send_adb_cuda((u_char *)output, (u_char *)output, 1486 adb_op_comprout, &flag, (int)0); 1487 if (result != 0) /* exit if not sent */ 1488 return -1; 1489 1490 while (0 == flag) /* wait for result */ 1491 ; 1492 1493 memcpy(t, output + 1, 4); 1494 return 0; 1495 1496 case ADB_HW_UNKNOWN: 1497 default: 1498 return -1; 1499 } 1500 } 1501 1502 /* caller should really use machine-independent version: setPramTime */ 1503 /* this version does pseudo-adb access only */ 1504 int 1505 adb_set_date_time(unsigned long t) 1506 { 1507 u_char output[ADB_MAX_MSG_LENGTH]; 1508 int result; 1509 volatile int flag = 0; 1510 1511 switch (adbHardware) { 1512 1513 case ADB_HW_CUDA: 1514 output[0] = 0x06; /* 6 byte message */ 1515 output[1] = 0x01; /* to pram/rtc device */ 1516 output[2] = 0x09; /* set date/time */ 1517 output[3] = (u_char)(t >> 24); 1518 output[4] = (u_char)(t >> 16); 1519 output[5] = (u_char)(t >> 8); 1520 output[6] = (u_char)(t); 1521 result = send_adb_cuda((u_char *)output, (u_char *)0, 1522 adb_op_comprout, &flag, (int)0); 1523 if (result != 0) /* exit if not sent */ 1524 return -1; 1525 1526 while (0 == flag) /* wait for send to finish */ 1527 ; 1528 1529 return 0; 1530 1531 case ADB_HW_PMU: 1532 pm_set_date_time(t); 1533 return 0; 1534 1535 case ADB_HW_UNKNOWN: 1536 default: 1537 return -1; 1538 } 1539 } 1540 1541 1542 int 1543 adb_poweroff(void) 1544 { 1545 u_char output[ADB_MAX_MSG_LENGTH]; 1546 int result; 1547 1548 adb_polling = 1; 1549 1550 switch (adbHardware) { 1551 case ADB_HW_PMU: 1552 pm_adb_poweroff(); 1553 1554 for (;;); /* wait for power off */ 1555 1556 return 0; 1557 1558 case ADB_HW_CUDA: 1559 output[0] = 0x02; /* 2 byte message */ 1560 output[1] = 0x01; /* to pram/rtc/soft-power device */ 1561 output[2] = 0x0a; /* set date/time */ 1562 result = send_adb_cuda((u_char *)output, (u_char *)0, 1563 (void *)0, (void *)0, (int)0); 1564 if (result != 0) /* exit if not sent */ 1565 return -1; 1566 1567 for (;;); /* wait for power off */ 1568 1569 return 0; 1570 1571 case ADB_HW_UNKNOWN: 1572 default: 1573 return -1; 1574 } 1575 } 1576 1577 int 1578 CountADBs(void) 1579 { 1580 return (count_adbs()); 1581 } 1582 1583 void 1584 ADBReInit(void) 1585 { 1586 adb_reinit(); 1587 } 1588 1589 int 1590 GetIndADB(ADBDataBlock * info, int index) 1591 { 1592 return (get_ind_adb_info(info, index)); 1593 } 1594 1595 int 1596 GetADBInfo(ADBDataBlock * info, int adbAddr) 1597 { 1598 return (get_adb_info(info, adbAddr)); 1599 } 1600 1601 int 1602 SetADBInfo(ADBSetInfoBlock * info, int adbAddr) 1603 { 1604 return (set_adb_info(info, adbAddr)); 1605 } 1606 1607 int 1608 ADBOp(Ptr buffer, adbComp *compRout, Ptr data, short commandNum) 1609 { 1610 return (adb_op(buffer, compRout, data, commandNum)); 1611 } 1612 1613 #endif 1614 1615 int 1616 setsoftadb(void) 1617 { 1618 callout_reset(&adb_soft_intr_ch, 1, (void *)adb_soft_intr, NULL); 1619 return 0; 1620 } 1621 1622 void 1623 adb_cuda_autopoll(void) 1624 { 1625 volatile int flag = 0; 1626 int result; 1627 u_char output[16]; 1628 1629 output[0] = 0x03; /* 3-byte message */ 1630 output[1] = 0x01; /* to pram/rtc device */ 1631 output[2] = 0x01; /* cuda autopoll */ 1632 output[3] = 0x01; 1633 result = send_adb_cuda(output, output, adb_op_comprout, 1634 &flag, 0); 1635 if (result != 0) /* exit if not sent */ 1636 return; 1637 1638 while (flag == 0); /* wait for result */ 1639 } 1640 1641 void 1642 adb_restart(void) 1643 { 1644 int result; 1645 u_char output[16]; 1646 1647 adb_polling = 1; 1648 1649 switch (adbHardware) { 1650 case ADB_HW_CUDA: 1651 output[0] = 0x02; /* 2 byte message */ 1652 output[1] = 0x01; /* to pram/rtc/soft-power device */ 1653 output[2] = 0x11; /* restart */ 1654 result = send_adb_cuda(output, NULL, NULL, NULL, 0); 1655 if (result != 0) /* exit if not sent */ 1656 return; 1657 while (1); /* not return */ 1658 1659 case ADB_HW_PMU: 1660 pm_adb_restart(); 1661 while (1); /* not return */ 1662 } 1663 } 1664
Indexes created Mon Sep 22 05:09:51 GMT 2025