1 /* $NetBSD: aic7xxx.c,v 1.148 2024/02/02 22:39:10 andvar Exp $ */ 2 3 /* 4 * Core routines and tables shareable across OS platforms. 5 * 6 * Copyright (c) 1994-2002 Justin T. Gibbs. 7 * Copyright (c) 2000-2002 Adaptec Inc. 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions, and the following disclaimer, 15 * without modification. 16 * 2. Redistributions in binary form must reproduce at minimum a disclaimer 17 * substantially similar to the "NO WARRANTY" disclaimer below 18 * ("Disclaimer") and any redistribution must be conditioned upon 19 * including a substantially similar Disclaimer requirement for further 20 * binary redistribution. 21 * 3. Neither the names of the above-listed copyright holders nor the names 22 * of any contributors may be used to endorse or promote products derived 23 * from this software without specific prior written permission. 24 * 25 * Alternatively, this software may be distributed under the terms of the 26 * GNU General Public License ("GPL") version 2 as published by the Free 27 * Software Foundation. 28 * 29 * NO WARRANTY 30 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 31 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 32 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR 33 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 34 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 35 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 36 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 37 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 38 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 39 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 40 * POSSIBILITY OF SUCH DAMAGES. 41 * 42 * $Id: aic7xxx.c,v 1.148 2024/02/02 22:39:10 andvar Exp $ 43 * 44 * //depot/aic7xxx/aic7xxx/aic7xxx.c#112 $ 45 * 46 * $FreeBSD: /repoman/r/ncvs/src/sys/dev/aic7xxx/aic7xxx.c,v 1.88 2003/01/20 20:44:55 gibbs Exp $ 47 */ 48 /* 49 * Ported from FreeBSD by Pascal Renauld, Network Storage Solutions, Inc. - April 2003 50 */ 51 52 #include <sys/cdefs.h> 53 __KERNEL_RCSID(0, "$NetBSD: aic7xxx.c,v 1.148 2024/02/02 22:39:10 andvar Exp $"); 54 55 #include <dev/ic/aic7xxx_osm.h> 56 #include <dev/ic/aic7xxx_inline.h> 57 #include <dev/ic/aic7xxx_cam.h> 58 59 /****************************** Softc Data ************************************/ 60 struct ahc_softc_tailq ahc_tailq = TAILQ_HEAD_INITIALIZER(ahc_tailq); 61 62 /***************************** Lookup Tables **********************************/ 63 const char * const ahc_chip_names[] = 64 { 65 "NONE", 66 "aic7770", 67 "aic7850", 68 "aic7855", 69 "aic7859", 70 "aic7860", 71 "aic7870", 72 "aic7880", 73 "aic7895", 74 "aic7895C", 75 "aic7890/91", 76 "aic7896/97", 77 "aic7892", 78 "aic7899" 79 }; 80 81 /* 82 * Hardware error codes. 83 */ 84 struct ahc_hard_error_entry { 85 uint8_t errno; 86 const char *errmesg; 87 }; 88 89 static struct ahc_hard_error_entry ahc_hard_errors[] = { 90 { ILLHADDR, "Illegal Host Access" }, 91 { ILLSADDR, "Illegal Sequencer Address referenced" }, 92 { ILLOPCODE, "Illegal Opcode in sequencer program" }, 93 { SQPARERR, "Sequencer Parity Error" }, 94 { DPARERR, "Data-path Parity Error" }, 95 { MPARERR, "Scratch or SCB Memory Parity Error" }, 96 { PCIERRSTAT, "PCI Error detected" }, 97 { CIOPARERR, "CIOBUS Parity Error" }, 98 }; 99 static const u_int num_errors = NUM_ELEMENTS(ahc_hard_errors); 100 101 static struct ahc_phase_table_entry ahc_phase_table[] = 102 { 103 { P_DATAOUT, MSG_NOOP, "in Data-out phase" }, 104 { P_DATAIN, MSG_INITIATOR_DET_ERR, "in Data-in phase" }, 105 { P_DATAOUT_DT, MSG_NOOP, "in DT Data-out phase" }, 106 { P_DATAIN_DT, MSG_INITIATOR_DET_ERR, "in DT Data-in phase" }, 107 { P_COMMAND, MSG_NOOP, "in Command phase" }, 108 { P_MESGOUT, MSG_NOOP, "in Message-out phase" }, 109 { P_STATUS, MSG_INITIATOR_DET_ERR, "in Status phase" }, 110 { P_MESGIN, MSG_PARITY_ERROR, "in Message-in phase" }, 111 { P_BUSFREE, MSG_NOOP, "while idle" }, 112 { 0, MSG_NOOP, "in unknown phase" } 113 }; 114 115 /* 116 * In most cases we only wish to iterate over real phases, so 117 * exclude the last element from the count. 118 */ 119 static const u_int num_phases = NUM_ELEMENTS(ahc_phase_table) - 1; 120 121 /* 122 * Valid SCSIRATE values. (p. 3-17) 123 * Provides a mapping of transfer periods in ns to the proper value to 124 * stick in the scsixfer reg. 125 */ 126 static struct ahc_syncrate ahc_syncrates[] = 127 { 128 /* ultra2 fast/ultra period rate */ 129 { 0x42, 0x000, 9, "80.0" }, 130 { 0x03, 0x000, 10, "40.0" }, 131 { 0x04, 0x000, 11, "33.0" }, 132 { 0x05, 0x100, 12, "20.0" }, 133 { 0x06, 0x110, 15, "16.0" }, 134 { 0x07, 0x120, 18, "13.4" }, 135 { 0x08, 0x000, 25, "10.0" }, 136 { 0x19, 0x010, 31, "8.0" }, 137 { 0x1a, 0x020, 37, "6.67" }, 138 { 0x1b, 0x030, 43, "5.7" }, 139 { 0x1c, 0x040, 50, "5.0" }, 140 { 0x00, 0x050, 56, "4.4" }, 141 { 0x00, 0x060, 62, "4.0" }, 142 { 0x00, 0x070, 68, "3.6" }, 143 { 0x00, 0x000, 0, NULL } 144 }; 145 146 /* Our Sequencer Program */ 147 #include <dev/microcode/aic7xxx/aic7xxx_seq.h> 148 149 /**************************** Function Declarations ***************************/ 150 static void ahc_force_renegotiation(struct ahc_softc *ahc); 151 static struct ahc_tmode_tstate* 152 ahc_alloc_tstate(struct ahc_softc *ahc, 153 u_int scsi_id, char channel); 154 #ifdef AHC_TARGET_MODE 155 static void ahc_free_tstate(struct ahc_softc *ahc, 156 u_int scsi_id, char channel, int force); 157 #endif 158 static struct ahc_syncrate* 159 ahc_devlimited_syncrate(struct ahc_softc *ahc, 160 struct ahc_initiator_tinfo *, 161 u_int *period, 162 u_int *ppr_options, 163 role_t role); 164 static void ahc_update_pending_scbs(struct ahc_softc *ahc); 165 static void ahc_fetch_devinfo(struct ahc_softc *ahc, 166 struct ahc_devinfo *devinfo); 167 static void ahc_scb_devinfo(struct ahc_softc *ahc, 168 struct ahc_devinfo *devinfo, 169 struct scb *scb); 170 static void ahc_assert_atn(struct ahc_softc *ahc); 171 static void ahc_setup_initiator_msgout(struct ahc_softc *ahc, 172 struct ahc_devinfo *devinfo, 173 struct scb *scb); 174 static void ahc_build_transfer_msg(struct ahc_softc *ahc, 175 struct ahc_devinfo *devinfo); 176 static void ahc_construct_sdtr(struct ahc_softc *ahc, 177 struct ahc_devinfo *devinfo, 178 u_int period, u_int offset); 179 static void ahc_construct_wdtr(struct ahc_softc *ahc, 180 struct ahc_devinfo *devinfo, 181 u_int bus_width); 182 static void ahc_construct_ppr(struct ahc_softc *ahc, 183 struct ahc_devinfo *devinfo, 184 u_int period, u_int offset, 185 u_int bus_width, u_int ppr_options); 186 static void ahc_clear_msg_state(struct ahc_softc *ahc); 187 static void ahc_handle_proto_violation(struct ahc_softc *ahc); 188 static void ahc_handle_message_phase(struct ahc_softc *ahc); 189 typedef enum { 190 AHCMSG_1B, 191 AHCMSG_2B, 192 AHCMSG_EXT 193 } ahc_msgtype; 194 static int ahc_sent_msg(struct ahc_softc *ahc, ahc_msgtype type, 195 u_int msgval, int full); 196 static int ahc_parse_msg(struct ahc_softc *ahc, 197 struct ahc_devinfo *devinfo); 198 static int ahc_handle_msg_reject(struct ahc_softc *ahc, 199 struct ahc_devinfo *devinfo); 200 static void ahc_handle_ign_wide_residue(struct ahc_softc *ahc, 201 struct ahc_devinfo *devinfo); 202 static void ahc_reinitialize_dataptrs(struct ahc_softc *ahc); 203 static void ahc_handle_devreset(struct ahc_softc *ahc, 204 struct ahc_devinfo *devinfo, 205 cam_status status, 206 const char *message, 207 int verbose_level); 208 #if AHC_TARGET_MODE 209 static void ahc_setup_target_msgin(struct ahc_softc *ahc, 210 struct ahc_devinfo *devinfo, 211 struct scb *scb); 212 #endif 213 214 #if 0 215 static bus_dmamap_callback_t ahc_dmamap_cb; 216 #endif 217 static void ahc_build_free_scb_list(struct ahc_softc *ahc); 218 static int ahc_init_scbdata(struct ahc_softc *ahc); 219 static void ahc_fini_scbdata(struct ahc_softc *ahc); 220 static void ahc_qinfifo_requeue(struct ahc_softc *ahc, 221 struct scb *prev_scb, 222 struct scb *scb); 223 static int ahc_qinfifo_count(struct ahc_softc *ahc); 224 static u_int ahc_rem_scb_from_disc_list(struct ahc_softc *ahc, 225 u_int prev, u_int scbptr); 226 static void ahc_add_curscb_to_free_list(struct ahc_softc *ahc); 227 static u_int ahc_rem_wscb(struct ahc_softc *ahc, 228 u_int scbpos, u_int prev); 229 static void ahc_reset_current_bus(struct ahc_softc *ahc); 230 #ifdef AHC_DUMP_SEQ 231 static void ahc_dumpseq(struct ahc_softc *ahc); 232 #endif 233 static void ahc_loadseq(struct ahc_softc *ahc); 234 static int ahc_check_patch(struct ahc_softc *ahc, 235 const struct patch **start_patch, 236 u_int start_instr, u_int *skip_addr); 237 static void ahc_download_instr(struct ahc_softc *ahc, 238 u_int instrptr, uint8_t *dconsts); 239 #ifdef AHC_TARGET_MODE 240 static void ahc_queue_lstate_event(struct ahc_softc *ahc, 241 struct ahc_tmode_lstate *lstate, 242 u_int initiator_id, 243 u_int event_type, 244 u_int event_arg); 245 static void ahc_update_scsiid(struct ahc_softc *ahc, 246 u_int targid_mask); 247 static int ahc_handle_target_cmd(struct ahc_softc *ahc, 248 struct target_cmd *cmd); 249 #endif 250 251 /************************** Added for porting to NetBSD ***********************/ 252 static int ahc_createdmamem(bus_dma_tag_t tag, 253 int size, 254 int flags, 255 bus_dmamap_t *mapp, 256 void **vaddr, 257 bus_addr_t *baddr, 258 bus_dma_segment_t *seg, 259 int *nseg, 260 const char *myname, const char *what); 261 static void ahc_freedmamem(bus_dma_tag_t tag, 262 int size, 263 bus_dmamap_t map, 264 void *vaddr, 265 bus_dma_segment_t *seg, 266 int nseg); 267 268 /************************* Sequencer Execution Control ************************/ 269 /* 270 * Restart the sequencer program from address zero 271 */ 272 void 273 ahc_restart(struct ahc_softc *ahc) 274 { 275 276 ahc_pause(ahc); 277 278 /* No more pending messages. */ 279 ahc_clear_msg_state(ahc); 280 281 ahc_outb(ahc, SCSISIGO, 0); /* De-assert BSY */ 282 ahc_outb(ahc, MSG_OUT, MSG_NOOP); /* No message to send */ 283 ahc_outb(ahc, SXFRCTL1, ahc_inb(ahc, SXFRCTL1) & ~BITBUCKET); 284 ahc_outb(ahc, LASTPHASE, P_BUSFREE); 285 ahc_outb(ahc, SAVED_SCSIID, 0xFF); 286 ahc_outb(ahc, SAVED_LUN, 0xFF); 287 288 /* 289 * Ensure that the sequencer's idea of TQINPOS 290 * matches our own. The sequencer increments TQINPOS 291 * only after it sees a DMA complete and a reset could 292 * occur before the increment leaving the kernel to believe 293 * the command arrived but the sequencer to not. 294 */ 295 ahc_outb(ahc, TQINPOS, ahc->tqinfifonext); 296 297 /* Always allow reselection */ 298 ahc_outb(ahc, SCSISEQ, 299 ahc_inb(ahc, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP)); 300 if ((ahc->features & AHC_CMD_CHAN) != 0) { 301 /* Ensure that no DMA operations are in progress */ 302 ahc_outb(ahc, CCSCBCNT, 0); 303 ahc_outb(ahc, CCSGCTL, 0); 304 ahc_outb(ahc, CCSCBCTL, 0); 305 } 306 /* 307 * If we were in the process of DMA'ing SCB data into 308 * an SCB, replace that SCB on the free list. This prevents 309 * an SCB leak. 310 */ 311 if ((ahc_inb(ahc, SEQ_FLAGS2) & SCB_DMA) != 0) { 312 ahc_add_curscb_to_free_list(ahc); 313 ahc_outb(ahc, SEQ_FLAGS2, 314 ahc_inb(ahc, SEQ_FLAGS2) & ~SCB_DMA); 315 } 316 ahc_outb(ahc, MWI_RESIDUAL, 0); 317 ahc_outb(ahc, SEQCTL, FASTMODE); 318 ahc_outb(ahc, SEQADDR0, 0); 319 ahc_outb(ahc, SEQADDR1, 0); 320 ahc_unpause(ahc); 321 } 322 323 /************************* Input/Output Queues ********************************/ 324 void 325 ahc_run_qoutfifo(struct ahc_softc *ahc) 326 { 327 struct scb *scb; 328 u_int scb_index; 329 330 ahc_sync_qoutfifo(ahc, BUS_DMASYNC_POSTREAD); 331 while (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL) { 332 333 scb_index = ahc->qoutfifo[ahc->qoutfifonext]; 334 if ((ahc->qoutfifonext & 0x03) == 0x03) { 335 u_int modnext; 336 337 /* 338 * Clear 32bits of QOUTFIFO at a time 339 * so that we don't clobber an incoming 340 * byte DMA to the array on architectures 341 * that only support 32bit load and store 342 * operations. 343 */ 344 modnext = ahc->qoutfifonext & ~0x3; 345 *((uint32_t *)(&ahc->qoutfifo[modnext])) = 0xFFFFFFFFUL; 346 ahc_dmamap_sync(ahc, 347 ahc->parent_dmat /*shared_data_dmat*/, 348 ahc->shared_data_dmamap, 349 /*offset*/modnext, /*len*/4, 350 BUS_DMASYNC_PREREAD); 351 } 352 ahc->qoutfifonext++; 353 354 scb = ahc_lookup_scb(ahc, scb_index); 355 if (scb == NULL) { 356 printf("%s: WARNING no command for scb %d " 357 "(cmdcmplt)\nQOUTPOS = %d\n", 358 ahc_name(ahc), scb_index, 359 (ahc->qoutfifonext - 1) & 0xFF); 360 continue; 361 } 362 363 /* 364 * Save off the residual 365 * if there is one. 366 */ 367 ahc_update_residual(ahc, scb); 368 ahc_done(ahc, scb); 369 } 370 } 371 372 void 373 ahc_run_untagged_queues(struct ahc_softc *ahc) 374 { 375 int i; 376 377 for (i = 0; i < 16; i++) 378 ahc_run_untagged_queue(ahc, &ahc->untagged_queues[i]); 379 } 380 381 void 382 ahc_run_untagged_queue(struct ahc_softc *ahc, struct scb_tailq *queue) 383 { 384 struct scb *scb; 385 386 if (ahc->untagged_queue_lock != 0) 387 return; 388 389 if ((scb = TAILQ_FIRST(queue)) != NULL 390 && (scb->flags & SCB_ACTIVE) == 0) { 391 scb->flags |= SCB_ACTIVE; 392 ahc_queue_scb(ahc, scb); 393 } 394 } 395 396 /************************* Interrupt Handling *********************************/ 397 void 398 ahc_handle_brkadrint(struct ahc_softc *ahc) 399 { 400 /* 401 * We upset the sequencer :-( 402 * Lookup the error message 403 */ 404 int i; 405 int error; 406 407 error = ahc_inb(ahc, ERROR); 408 for (i = 0; error != 1 && i < num_errors; i++) 409 error >>= 1; 410 printf("%s: brkadrint, %s at seqaddr = 0x%x\n", 411 ahc_name(ahc), ahc_hard_errors[i].errmesg, 412 ahc_inb(ahc, SEQADDR0) | 413 (ahc_inb(ahc, SEQADDR1) << 8)); 414 415 ahc_dump_card_state(ahc); 416 417 /* Tell everyone that this HBA is no longer available */ 418 ahc_abort_scbs(ahc, CAM_TARGET_WILDCARD, ALL_CHANNELS, 419 CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN, 420 CAM_NO_HBA); 421 422 /* Disable all interrupt sources by resetting the controller */ 423 ahc_shutdown(ahc); 424 } 425 426 void 427 ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat) 428 { 429 struct scb *scb; 430 struct ahc_devinfo devinfo; 431 432 ahc_fetch_devinfo(ahc, &devinfo); 433 434 /* 435 * Clear the upper byte that holds SEQINT status 436 * codes and clear the SEQINT bit. We will unpause 437 * the sequencer, if appropriate, after servicing 438 * the request. 439 */ 440 ahc_outb(ahc, CLRINT, CLRSEQINT); 441 switch (intstat & SEQINT_MASK) { 442 case BAD_STATUS: 443 { 444 u_int scb_index; 445 struct hardware_scb *hscb; 446 447 /* 448 * Set the default return value to 0 (don't 449 * send sense). The sense code will change 450 * this if needed. 451 */ 452 ahc_outb(ahc, RETURN_1, 0); 453 454 /* 455 * The sequencer will notify us when a command 456 * has an error that would be of interest to 457 * the kernel. This allows us to leave the sequencer 458 * running in the common case of command completes 459 * without error. The sequencer will already have 460 * DMA'd the SCB back up to us, so we can reference 461 * the in kernel copy directly. 462 */ 463 scb_index = ahc_inb(ahc, SCB_TAG); 464 scb = ahc_lookup_scb(ahc, scb_index); 465 if (scb == NULL) { 466 ahc_print_devinfo(ahc, &devinfo); 467 printf("ahc_intr - referenced scb " 468 "not valid during seqint 0x%x scb(%d)\n", 469 intstat, scb_index); 470 ahc_dump_card_state(ahc); 471 panic("for safety"); 472 goto unpause; 473 } 474 475 hscb = scb->hscb; 476 477 /* Don't want to clobber the original sense code */ 478 if ((scb->flags & SCB_SENSE) != 0) { 479 /* 480 * Clear the SCB_SENSE Flag and have 481 * the sequencer do a normal command 482 * complete. 483 */ 484 scb->flags &= ~SCB_SENSE; 485 break; 486 } 487 /* Freeze the queue until the client sees the error. */ 488 ahc_freeze_devq(ahc, scb); 489 ahc_freeze_scb(scb); 490 ahc_set_scsi_status(scb, hscb->shared_data.status.scsi_status); 491 switch (hscb->shared_data.status.scsi_status) { 492 case SCSI_STATUS_OK: 493 printf("%s: Interrupted for status of 0 (?)\n", 494 ahc_name(ahc)); 495 break; 496 case SCSI_STATUS_CMD_TERMINATED: 497 case SCSI_STATUS_CHECK_COND: 498 { 499 struct ahc_dma_seg *sg; 500 struct scsi_request_sense *sc; 501 struct ahc_initiator_tinfo *targ_info; 502 struct ahc_tmode_tstate *tstate; 503 struct ahc_transinfo *tinfo; 504 uint32_t len; 505 #ifdef AHC_DEBUG 506 if (ahc_debug & AHC_SHOW_SENSE) { 507 ahc_print_path(ahc, scb); 508 printf("SCB %d: requests Check Status\n", 509 scb->hscb->tag); 510 } 511 #endif 512 513 if (ahc_perform_autosense(scb) == 0) 514 break; 515 516 targ_info = ahc_fetch_transinfo(ahc, 517 devinfo.channel, 518 devinfo.our_scsiid, 519 devinfo.target, 520 &tstate); 521 tinfo = &targ_info->curr; 522 sg = scb->sg_list; 523 sc = (struct scsi_request_sense *) 524 (&hscb->shared_data.cdb); 525 /* 526 * Save off the residual if there is one. 527 */ 528 ahc_update_residual(ahc, scb); 529 #ifdef AHC_DEBUG 530 if (ahc_debug & AHC_SHOW_SENSE) { 531 ahc_print_path(ahc, scb); 532 printf("Sending Sense\n"); 533 } 534 #endif 535 sg->addr = ahc_htole32(ahc_get_sense_bufaddr(ahc, scb)); 536 len = ahc_get_sense_bufsize(ahc, scb); 537 sg->len = ahc_htole32(len | AHC_DMA_LAST_SEG); 538 539 memset(sc, 0, sizeof(*sc)); 540 sc->opcode = SCSI_REQUEST_SENSE; 541 if (tinfo->protocol_version <= SCSI_REV_2 542 && SCB_GET_LUN(scb) < 8) 543 sc->byte2 = SCB_GET_LUN(scb) << 5; 544 sc->length = len; 545 546 /* 547 * We can't allow the target to disconnect. 548 * This will be an untagged transaction and 549 * having the target disconnect will make this 550 * transaction indistinguishable from outstanding 551 * tagged transactions. 552 */ 553 hscb->control = 0; 554 555 /* 556 * This request sense could be because the 557 * the device lost power or in some other 558 * way has lost our transfer negotiations. 559 * Renegotiate if appropriate. Unit attention 560 * errors will be reported before any data 561 * phases occur. 562 */ 563 if (ahc_get_residual(scb) 564 == ahc_get_transfer_length(scb)) { 565 ahc_update_neg_request(ahc, &devinfo, 566 tstate, targ_info, 567 AHC_NEG_IF_NON_ASYNC); 568 } 569 if (tstate->auto_negotiate & devinfo.target_mask) { 570 hscb->control |= MK_MESSAGE; 571 scb->flags &= ~SCB_NEGOTIATE; 572 scb->flags |= SCB_AUTO_NEGOTIATE; 573 } 574 hscb->cdb_len = sizeof(*sc); 575 hscb->dataptr = sg->addr; 576 hscb->datacnt = sg->len; 577 hscb->sgptr = 578 ahc_htole32(scb->sg_list_phys | SG_FULL_RESID); 579 scb->sg_count = 1; 580 scb->flags |= SCB_SENSE; 581 ahc_qinfifo_requeue_tail(ahc, scb); 582 ahc_outb(ahc, RETURN_1, SEND_SENSE); 583 /* 584 * Ensure we have enough time to actually 585 * retrieve the sense. 586 */ 587 ahc_scb_timer_reset(scb, 5 * 1000000); 588 break; 589 } 590 default: 591 break; 592 } 593 break; 594 } 595 case NO_MATCH: 596 { 597 /* Ensure we don't leave the selection hardware on */ 598 ahc_outb(ahc, SCSISEQ, 599 ahc_inb(ahc, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP)); 600 601 printf("%s:%c:%d: no active SCB for reconnecting " 602 "target - issuing BUS DEVICE RESET\n", 603 ahc_name(ahc), devinfo.channel, devinfo.target); 604 printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, " 605 "ARG_1 == 0x%x ACCUM = 0x%x\n", 606 ahc_inb(ahc, SAVED_SCSIID), ahc_inb(ahc, SAVED_LUN), 607 ahc_inb(ahc, ARG_1), ahc_inb(ahc, ACCUM)); 608 printf("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, " 609 "SINDEX == 0x%x\n", 610 ahc_inb(ahc, SEQ_FLAGS), ahc_inb(ahc, SCBPTR), 611 ahc_index_busy_tcl(ahc, 612 BUILD_TCL(ahc_inb(ahc, SAVED_SCSIID), 613 ahc_inb(ahc, SAVED_LUN))), 614 ahc_inb(ahc, SINDEX)); 615 printf("SCSIID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, " 616 "SCB_TAG == 0x%x, SCB_CONTROL == 0x%x\n", 617 ahc_inb(ahc, SCSIID), ahc_inb(ahc, SCB_SCSIID), 618 ahc_inb(ahc, SCB_LUN), ahc_inb(ahc, SCB_TAG), 619 ahc_inb(ahc, SCB_CONTROL)); 620 printf("SCSIBUSL == 0x%x, SCSISIGI == 0x%x\n", 621 ahc_inb(ahc, SCSIBUSL), ahc_inb(ahc, SCSISIGI)); 622 printf("SXFRCTL0 == 0x%x\n", ahc_inb(ahc, SXFRCTL0)); 623 printf("SEQCTL == 0x%x\n", ahc_inb(ahc, SEQCTL)); 624 ahc_dump_card_state(ahc); 625 ahc->msgout_buf[0] = MSG_BUS_DEV_RESET; 626 ahc->msgout_len = 1; 627 ahc->msgout_index = 0; 628 ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 629 ahc_outb(ahc, MSG_OUT, HOST_MSG); 630 ahc_assert_atn(ahc); 631 break; 632 } 633 case SEND_REJECT: 634 { 635 u_int rejbyte = ahc_inb(ahc, ACCUM); 636 printf("%s:%c:%d: Warning - unknown message received from " 637 "target (0x%x). Rejecting\n", 638 ahc_name(ahc), devinfo.channel, devinfo.target, rejbyte); 639 break; 640 } 641 case PROTO_VIOLATION: 642 { 643 ahc_handle_proto_violation(ahc); 644 break; 645 } 646 case IGN_WIDE_RES: 647 ahc_handle_ign_wide_residue(ahc, &devinfo); 648 break; 649 case PDATA_REINIT: 650 ahc_reinitialize_dataptrs(ahc); 651 break; 652 case BAD_PHASE: 653 { 654 u_int lastphase; 655 656 lastphase = ahc_inb(ahc, LASTPHASE); 657 printf("%s:%c:%d: unknown scsi bus phase %x, " 658 "lastphase = 0x%x. Attempting to continue\n", 659 ahc_name(ahc), devinfo.channel, devinfo.target, 660 lastphase, ahc_inb(ahc, SCSISIGI)); 661 break; 662 } 663 case MISSED_BUSFREE: 664 { 665 u_int lastphase; 666 667 lastphase = ahc_inb(ahc, LASTPHASE); 668 printf("%s:%c:%d: Missed busfree. " 669 "Lastphase = 0x%x, Curphase = 0x%x\n", 670 ahc_name(ahc), devinfo.channel, devinfo.target, 671 lastphase, ahc_inb(ahc, SCSISIGI)); 672 ahc_restart(ahc); 673 return; 674 } 675 case HOST_MSG_LOOP: 676 { 677 /* 678 * The sequencer has encountered a message phase 679 * that requires host assistance for completion. 680 * While handling the message phase(s), we will be 681 * notified by the sequencer after each byte is 682 * transferred so we can track bus phase changes. 683 * 684 * If this is the first time we've seen a HOST_MSG_LOOP 685 * interrupt, initialize the state of the host message 686 * loop. 687 */ 688 if (ahc->msg_type == MSG_TYPE_NONE) { 689 struct scb *scb1; 690 u_int scb_index; 691 u_int bus_phase; 692 693 bus_phase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK; 694 if (bus_phase != P_MESGIN 695 && bus_phase != P_MESGOUT) { 696 printf("ahc_intr: HOST_MSG_LOOP bad " 697 "phase 0x%x\n", 698 bus_phase); 699 /* 700 * Probably transitioned to bus free before 701 * we got here. Just punt the message. 702 */ 703 ahc_clear_intstat(ahc); 704 ahc_restart(ahc); 705 return; 706 } 707 708 scb_index = ahc_inb(ahc, SCB_TAG); 709 scb1 = ahc_lookup_scb(ahc, scb_index); 710 if (devinfo.role == ROLE_INITIATOR) { 711 if (scb1 == NULL) 712 panic("HOST_MSG_LOOP with " 713 "invalid SCB %x\n", scb_index); 714 715 if (bus_phase == P_MESGOUT) 716 ahc_setup_initiator_msgout(ahc, 717 &devinfo, 718 scb1); 719 else { 720 ahc->msg_type = 721 MSG_TYPE_INITIATOR_MSGIN; 722 ahc->msgin_index = 0; 723 } 724 } 725 #if AHC_TARGET_MODE 726 else { 727 if (bus_phase == P_MESGOUT) { 728 ahc->msg_type = 729 MSG_TYPE_TARGET_MSGOUT; 730 ahc->msgin_index = 0; 731 } 732 else 733 ahc_setup_target_msgin(ahc, 734 &devinfo, 735 scb1); 736 } 737 #endif 738 } 739 740 ahc_handle_message_phase(ahc); 741 break; 742 } 743 case PERR_DETECTED: 744 { 745 /* 746 * If we've cleared the parity error interrupt 747 * but the sequencer still believes that SCSIPERR 748 * is true, it must be that the parity error is 749 * for the currently presented byte on the bus, 750 * and we are not in a phase (data-in) where we will 751 * eventually ack this byte. Ack the byte and 752 * throw it away in the hope that the target will 753 * take us to message out to deliver the appropriate 754 * error message. 755 */ 756 if ((intstat & SCSIINT) == 0 757 && (ahc_inb(ahc, SSTAT1) & SCSIPERR) != 0) { 758 759 if ((ahc->features & AHC_DT) == 0) { 760 u_int curphase; 761 762 /* 763 * The hardware will only let you ack bytes 764 * if the expected phase in SCSISIGO matches 765 * the current phase. Make sure this is 766 * currently the case. 767 */ 768 curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK; 769 ahc_outb(ahc, LASTPHASE, curphase); 770 ahc_outb(ahc, SCSISIGO, curphase); 771 } 772 if ((ahc_inb(ahc, SCSISIGI) & (CDI|MSGI)) == 0) { 773 int wait; 774 775 /* 776 * In a data phase. Faster to bitbucket 777 * the data than to individually ack each 778 * byte. This is also the only strategy 779 * that will work with AUTOACK enabled. 780 */ 781 ahc_outb(ahc, SXFRCTL1, 782 ahc_inb(ahc, SXFRCTL1) | BITBUCKET); 783 wait = 5000; 784 while (--wait != 0) { 785 if ((ahc_inb(ahc, SCSISIGI) 786 & (CDI|MSGI)) != 0) 787 break; 788 ahc_delay(100); 789 } 790 ahc_outb(ahc, SXFRCTL1, 791 ahc_inb(ahc, SXFRCTL1) & ~BITBUCKET); 792 if (wait == 0) { 793 struct scb *scb1; 794 u_int scb_index; 795 796 ahc_print_devinfo(ahc, &devinfo); 797 printf("Unable to clear parity error. " 798 "Resetting bus.\n"); 799 scb_index = ahc_inb(ahc, SCB_TAG); 800 scb1 = ahc_lookup_scb(ahc, scb_index); 801 if (scb1 != NULL) 802 ahc_set_transaction_status(scb1, 803 CAM_UNCOR_PARITY); 804 ahc_reset_channel(ahc, devinfo.channel, 805 /*init reset*/TRUE); 806 } 807 } else { 808 (void)ahc_inb(ahc, SCSIDATL); 809 } 810 } 811 break; 812 } 813 case DATA_OVERRUN: 814 { 815 /* 816 * When the sequencer detects an overrun, it 817 * places the controller in "BITBUCKET" mode 818 * and allows the target to complete its transfer. 819 * Unfortunately, none of the counters get updated 820 * when the controller is in this mode, so we have 821 * no way of knowing how large the overrun was. 822 */ 823 u_int scbindex = ahc_inb(ahc, SCB_TAG); 824 u_int lastphase = ahc_inb(ahc, LASTPHASE); 825 u_int i; 826 827 scb = ahc_lookup_scb(ahc, scbindex); 828 for (i = 0; i < num_phases; i++) { 829 if (lastphase == ahc_phase_table[i].phase) 830 break; 831 } 832 ahc_print_path(ahc, scb); 833 printf("data overrun detected %s." 834 " Tag == 0x%x.\n", 835 ahc_phase_table[i].phasemsg, 836 scb->hscb->tag); 837 ahc_print_path(ahc, scb); 838 printf("%s seen Data Phase. Length = %ld. NumSGs = %d.\n", 839 ahc_inb(ahc, SEQ_FLAGS) & DPHASE ? "Have" : "Haven't", 840 ahc_get_transfer_length(scb), scb->sg_count); 841 if (scb->sg_count > 0) { 842 for (i = 0; i < scb->sg_count; i++) { 843 844 printf("sg[%d] - Addr 0x%x%x : Length %d\n", 845 i, 846 (ahc_le32toh(scb->sg_list[i].len) >> 24 847 & SG_HIGH_ADDR_BITS), 848 ahc_le32toh(scb->sg_list[i].addr), 849 ahc_le32toh(scb->sg_list[i].len) 850 & AHC_SG_LEN_MASK); 851 } 852 } 853 /* 854 * Set this and it will take effect when the 855 * target does a command complete. 856 */ 857 ahc_freeze_devq(ahc, scb); 858 if ((scb->flags & SCB_SENSE) == 0) { 859 ahc_set_transaction_status(scb, CAM_DATA_RUN_ERR); 860 } else { 861 scb->flags &= ~SCB_SENSE; 862 ahc_set_transaction_status(scb, CAM_AUTOSENSE_FAIL); 863 } 864 ahc_freeze_scb(scb); 865 866 if ((ahc->features & AHC_ULTRA2) != 0) { 867 /* 868 * Clear the channel in case we return 869 * to data phase later. 870 */ 871 ahc_outb(ahc, SXFRCTL0, 872 ahc_inb(ahc, SXFRCTL0) | CLRSTCNT|CLRCHN); 873 ahc_outb(ahc, SXFRCTL0, 874 ahc_inb(ahc, SXFRCTL0) | CLRSTCNT|CLRCHN); 875 } 876 if ((ahc->flags & AHC_39BIT_ADDRESSING) != 0) { 877 u_int dscommand1; 878 879 /* Ensure HHADDR is 0 for future DMA operations. */ 880 dscommand1 = ahc_inb(ahc, DSCOMMAND1); 881 ahc_outb(ahc, DSCOMMAND1, dscommand1 | HADDLDSEL0); 882 ahc_outb(ahc, HADDR, 0); 883 ahc_outb(ahc, DSCOMMAND1, dscommand1); 884 } 885 break; 886 } 887 case MKMSG_FAILED: 888 { 889 u_int scbindex; 890 891 printf("%s:%c:%d:%d: Attempt to issue message failed\n", 892 ahc_name(ahc), devinfo.channel, devinfo.target, 893 devinfo.lun); 894 scbindex = ahc_inb(ahc, SCB_TAG); 895 scb = ahc_lookup_scb(ahc, scbindex); 896 if (scb != NULL 897 && (scb->flags & SCB_RECOVERY_SCB) != 0) 898 /* 899 * Ensure that we didn't put a second instance of this 900 * SCB into the QINFIFO. 901 */ 902 ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb), 903 SCB_GET_CHANNEL(ahc, scb), 904 SCB_GET_LUN(scb), scb->hscb->tag, 905 ROLE_INITIATOR, /*status*/0, 906 SEARCH_REMOVE); 907 break; 908 } 909 case NO_FREE_SCB: 910 { 911 printf("%s: No free or disconnected SCBs\n", ahc_name(ahc)); 912 ahc_dump_card_state(ahc); 913 panic("for safety"); 914 break; 915 } 916 case SCB_MISMATCH: 917 { 918 u_int scbptr; 919 920 scbptr = ahc_inb(ahc, SCBPTR); 921 printf("Bogus TAG after DMA. SCBPTR %d, tag %d, our tag %d\n", 922 scbptr, ahc_inb(ahc, ARG_1), 923 ahc->scb_data->hscbs[scbptr].tag); 924 ahc_dump_card_state(ahc); 925 panic("for safety"); 926 break; 927 } 928 case OUT_OF_RANGE: 929 { 930 printf("%s: BTT calculation out of range\n", ahc_name(ahc)); 931 printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, " 932 "ARG_1 == 0x%x ACCUM = 0x%x\n", 933 ahc_inb(ahc, SAVED_SCSIID), ahc_inb(ahc, SAVED_LUN), 934 ahc_inb(ahc, ARG_1), ahc_inb(ahc, ACCUM)); 935 printf("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, " 936 "SINDEX == 0x%x\n, A == 0x%x\n", 937 ahc_inb(ahc, SEQ_FLAGS), ahc_inb(ahc, SCBPTR), 938 ahc_index_busy_tcl(ahc, 939 BUILD_TCL(ahc_inb(ahc, SAVED_SCSIID), 940 ahc_inb(ahc, SAVED_LUN))), 941 ahc_inb(ahc, SINDEX), 942 ahc_inb(ahc, ACCUM)); 943 printf("SCSIID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, " 944 "SCB_TAG == 0x%x, SCB_CONTROL == 0x%x\n", 945 ahc_inb(ahc, SCSIID), ahc_inb(ahc, SCB_SCSIID), 946 ahc_inb(ahc, SCB_LUN), ahc_inb(ahc, SCB_TAG), 947 ahc_inb(ahc, SCB_CONTROL)); 948 printf("SCSIBUSL == 0x%x, SCSISIGI == 0x%x\n", 949 ahc_inb(ahc, SCSIBUSL), ahc_inb(ahc, SCSISIGI)); 950 ahc_dump_card_state(ahc); 951 panic("for safety"); 952 break; 953 } 954 default: 955 printf("ahc_intr: seqint, " 956 "intstat == 0x%x, scsisigi = 0x%x\n", 957 intstat, ahc_inb(ahc, SCSISIGI)); 958 break; 959 } 960 unpause: 961 /* 962 * The sequencer is paused immediately on 963 * a SEQINT, so we should restart it when 964 * we're done. 965 */ 966 ahc_unpause(ahc); 967 } 968 969 void 970 ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat) 971 { 972 u_int scb_index; 973 u_int status0; 974 u_int status; 975 struct scb *scb; 976 char cur_channel; 977 char intr_channel; 978 979 if ((ahc->features & AHC_TWIN) != 0 980 && ((ahc_inb(ahc, SBLKCTL) & SELBUSB) != 0)) 981 cur_channel = 'B'; 982 else 983 cur_channel = 'A'; 984 intr_channel = cur_channel; 985 986 if ((ahc->features & AHC_ULTRA2) != 0) 987 status0 = ahc_inb(ahc, SSTAT0) & IOERR; 988 else 989 status0 = 0; 990 status = ahc_inb(ahc, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR); 991 if (status == 0 && status0 == 0) { 992 if ((ahc->features & AHC_TWIN) != 0) { 993 /* Try the other channel */ 994 ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) ^ SELBUSB); 995 status = ahc_inb(ahc, SSTAT1) 996 & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR); 997 intr_channel = (cur_channel == 'A') ? 'B' : 'A'; 998 } 999 if (status == 0) { 1000 printf("%s: Spurious SCSI interrupt\n", ahc_name(ahc)); 1001 ahc_outb(ahc, CLRINT, CLRSCSIINT); 1002 ahc_unpause(ahc); 1003 return; 1004 } 1005 } 1006 1007 /* Make sure the sequencer is in a safe location. */ 1008 ahc_clear_critical_section(ahc); 1009 1010 scb_index = ahc_inb(ahc, SCB_TAG); 1011 scb = ahc_lookup_scb(ahc, scb_index); 1012 if (scb != NULL 1013 && (ahc_inb(ahc, SEQ_FLAGS) & NOT_IDENTIFIED) != 0) 1014 scb = NULL; 1015 1016 if ((ahc->features & AHC_ULTRA2) != 0 1017 && (status0 & IOERR) != 0) { 1018 int now_lvd; 1019 1020 now_lvd = ahc_inb(ahc, SBLKCTL) & ENAB40; 1021 printf("%s: Transceiver State Has Changed to %s mode\n", 1022 ahc_name(ahc), now_lvd ? "LVD" : "SE"); 1023 ahc_outb(ahc, CLRSINT0, CLRIOERR); 1024 /* 1025 * When transitioning to SE mode, the reset line 1026 * glitches, triggering an arbitration bug in some 1027 * Ultra2 controllers. This bug is cleared when we 1028 * assert the reset line. Since a reset glitch has 1029 * already occurred with this transition and a 1030 * transceiver state change is handled just like 1031 * a bus reset anyway, asserting the reset line 1032 * ourselves is safe. 1033 */ 1034 ahc_reset_channel(ahc, intr_channel, 1035 /*Initiate Reset*/now_lvd == 0); 1036 } else if ((status & SCSIRSTI) != 0) { 1037 printf("%s: Someone reset channel %c\n", 1038 ahc_name(ahc), intr_channel); 1039 if (intr_channel != cur_channel) 1040 ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) ^ SELBUSB); 1041 ahc_reset_channel(ahc, intr_channel, /*Initiate Reset*/FALSE); 1042 } else if ((status & SCSIPERR) != 0) { 1043 /* 1044 * Determine the bus phase and queue an appropriate message. 1045 * SCSIPERR is latched true as soon as a parity error 1046 * occurs. If the sequencer acked the transfer that 1047 * caused the parity error and the currently presented 1048 * transfer on the bus has correct parity, SCSIPERR will 1049 * be cleared by CLRSCSIPERR. Use this to determine if 1050 * we should look at the last phase the sequencer recorded, 1051 * or the current phase presented on the bus. 1052 */ 1053 u_int mesg_out; 1054 u_int curphase; 1055 u_int errorphase; 1056 u_int lastphase; 1057 u_int scsirate; 1058 u_int i; 1059 u_int sstat2; 1060 int silent; 1061 1062 lastphase = ahc_inb(ahc, LASTPHASE); 1063 curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK; 1064 sstat2 = ahc_inb(ahc, SSTAT2); 1065 ahc_outb(ahc, CLRSINT1, CLRSCSIPERR); 1066 /* 1067 * For all phases save DATA, the sequencer won't 1068 * automatically ack a byte that has a parity error 1069 * in it. So the only way that the current phase 1070 * could be 'data-in' is if the parity error is for 1071 * an already acked byte in the data phase. During 1072 * synchronous data-in transfers, we may actually 1073 * ack bytes before latching the current phase in 1074 * LASTPHASE, leading to the discrepancy between 1075 * curphase and lastphase. 1076 */ 1077 if ((ahc_inb(ahc, SSTAT1) & SCSIPERR) != 0 1078 || curphase == P_DATAIN || curphase == P_DATAIN_DT) 1079 errorphase = curphase; 1080 else 1081 errorphase = lastphase; 1082 1083 for (i = 0; i < num_phases; i++) { 1084 if (errorphase == ahc_phase_table[i].phase) 1085 break; 1086 } 1087 mesg_out = ahc_phase_table[i].mesg_out; 1088 silent = FALSE; 1089 if (scb != NULL) { 1090 if (SCB_IS_SILENT(scb)) 1091 silent = TRUE; 1092 else 1093 ahc_print_path(ahc, scb); 1094 scb->flags |= SCB_TRANSMISSION_ERROR; 1095 } else 1096 printf("%s:%c:%d: ", ahc_name(ahc), intr_channel, 1097 SCSIID_TARGET(ahc, ahc_inb(ahc, SAVED_SCSIID))); 1098 scsirate = ahc_inb(ahc, SCSIRATE); 1099 if (silent == FALSE) { 1100 printf("parity error detected %s. " 1101 "SEQADDR(0x%x) SCSIRATE(0x%x)\n", 1102 ahc_phase_table[i].phasemsg, 1103 ahc_inw(ahc, SEQADDR0), 1104 scsirate); 1105 if ((ahc->features & AHC_DT) != 0) { 1106 if ((sstat2 & CRCVALERR) != 0) 1107 printf("\tCRC Value Mismatch\n"); 1108 if ((sstat2 & CRCENDERR) != 0) 1109 printf("\tNo terminal CRC packet " 1110 "received\n"); 1111 if ((sstat2 & CRCREQERR) != 0) 1112 printf("\tIllegal CRC packet " 1113 "request\n"); 1114 if ((sstat2 & DUAL_EDGE_ERR) != 0) 1115 printf("\tUnexpected %sDT Data Phase\n", 1116 (scsirate & SINGLE_EDGE) 1117 ? "" : "non-"); 1118 } 1119 } 1120 1121 if ((ahc->features & AHC_DT) != 0 1122 && (sstat2 & DUAL_EDGE_ERR) != 0) { 1123 /* 1124 * This error applies regardless of 1125 * data direction, so ignore the value 1126 * in the phase table. 1127 */ 1128 mesg_out = MSG_INITIATOR_DET_ERR; 1129 } 1130 1131 /* 1132 * We've set the hardware to assert ATN if we 1133 * get a parity error on "in" phases, so all we 1134 * need to do is stuff the message buffer with 1135 * the appropriate message. "In" phases have set 1136 * mesg_out to something other than MSG_NOP. 1137 */ 1138 if (mesg_out != MSG_NOOP) { 1139 if (ahc->msg_type != MSG_TYPE_NONE) 1140 ahc->send_msg_perror = TRUE; 1141 else 1142 ahc_outb(ahc, MSG_OUT, mesg_out); 1143 } 1144 /* 1145 * Force a renegotiation with this target just in 1146 * case we are out of sync for some external reason 1147 * unknown (or unreported) by the target. 1148 */ 1149 ahc_force_renegotiation(ahc); 1150 ahc_outb(ahc, CLRINT, CLRSCSIINT); 1151 ahc_unpause(ahc); 1152 } else if ((status & SELTO) != 0) { 1153 u_int scbptr; 1154 1155 /* Stop the selection */ 1156 ahc_outb(ahc, SCSISEQ, 0); 1157 1158 /* No more pending messages */ 1159 ahc_clear_msg_state(ahc); 1160 1161 /* Clear interrupt state */ 1162 ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENBUSFREE); 1163 ahc_outb(ahc, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR); 1164 1165 /* 1166 * Although the driver does not care about the 1167 * 'Selection in Progress' status bit, the busy 1168 * LED does. SELINGO is only cleared by a successful 1169 * selection, so we must manually clear it to insure 1170 * the LED turns off just incase no future successful 1171 * selections occur (e.g. no devices on the bus). 1172 */ 1173 ahc_outb(ahc, CLRSINT0, CLRSELINGO); 1174 1175 scbptr = ahc_inb(ahc, WAITING_SCBH); 1176 ahc_outb(ahc, SCBPTR, scbptr); 1177 scb_index = ahc_inb(ahc, SCB_TAG); 1178 1179 scb = ahc_lookup_scb(ahc, scb_index); 1180 if (scb == NULL) { 1181 printf("%s: ahc_intr - referenced scb not " 1182 "valid during SELTO scb(%d, %d)\n", 1183 ahc_name(ahc), scbptr, scb_index); 1184 ahc_dump_card_state(ahc); 1185 } else { 1186 #ifdef AHC_DEBUG 1187 if ((ahc_debug & AHC_SHOW_SELTO) != 0) { 1188 ahc_print_path(ahc, scb); 1189 printf("Saw Selection Timeout for SCB 0x%x\n", 1190 scb_index); 1191 } 1192 #endif 1193 /* 1194 * Force a renegotiation with this target just in 1195 * case the cable was pulled and will later be 1196 * re-attached. The target may forget its negotiation 1197 * settings with us should it attempt to reselect 1198 * during the interruption. The target will not issue 1199 * a unit attention in this case, so we must always 1200 * renegotiate. 1201 */ 1202 ahc_force_renegotiation(ahc); 1203 ahc_set_transaction_status(scb, CAM_SEL_TIMEOUT); 1204 ahc_freeze_devq(ahc, scb); 1205 } 1206 ahc_outb(ahc, CLRINT, CLRSCSIINT); 1207 ahc_restart(ahc); 1208 } else if ((status & BUSFREE) != 0 1209 && (ahc_inb(ahc, SIMODE1) & ENBUSFREE) != 0) { 1210 u_int lastphase; 1211 u_int saved_scsiid; 1212 u_int saved_lun; 1213 u_int target; 1214 u_int initiator_role_id; 1215 char channel; 1216 int printerror; 1217 1218 /* 1219 * Clear our selection hardware as soon as possible. 1220 * We may have an entry in the waiting Q for this target, 1221 * that is affected by this busfree and we don't want to 1222 * go about selecting the target while we handle the event. 1223 */ 1224 ahc_outb(ahc, SCSISEQ, 1225 ahc_inb(ahc, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP)); 1226 1227 /* 1228 * Disable busfree interrupts and clear the busfree 1229 * interrupt status. We do this here so that several 1230 * bus transactions occur prior to clearing the SCSIINT 1231 * latch. It can take a bit for the clearing to take effect. 1232 */ 1233 ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENBUSFREE); 1234 ahc_outb(ahc, CLRSINT1, CLRBUSFREE|CLRSCSIPERR); 1235 1236 /* 1237 * Look at what phase we were last in. 1238 * If its message out, chances are pretty good 1239 * that the busfree was in response to one of 1240 * our abort requests. 1241 */ 1242 lastphase = ahc_inb(ahc, LASTPHASE); 1243 saved_scsiid = ahc_inb(ahc, SAVED_SCSIID); 1244 saved_lun = ahc_inb(ahc, SAVED_LUN); 1245 target = SCSIID_TARGET(ahc, saved_scsiid); 1246 initiator_role_id = SCSIID_OUR_ID(saved_scsiid); 1247 channel = SCSIID_CHANNEL(ahc, saved_scsiid); 1248 printerror = 1; 1249 1250 if (lastphase == P_MESGOUT) { 1251 struct ahc_devinfo devinfo; 1252 u_int tag; 1253 1254 ahc_fetch_devinfo(ahc, &devinfo); 1255 tag = SCB_LIST_NULL; 1256 if (ahc_sent_msg(ahc, AHCMSG_1B, MSG_ABORT_TAG, TRUE) 1257 || ahc_sent_msg(ahc, AHCMSG_1B, MSG_ABORT, TRUE)) { 1258 if (ahc->msgout_buf[ahc->msgout_index - 1] 1259 == MSG_ABORT_TAG) 1260 tag = scb->hscb->tag; 1261 ahc_print_path(ahc, scb); 1262 printf("SCB %d - Abort%s Completed.\n", 1263 scb->hscb->tag, tag == SCB_LIST_NULL ? 1264 "" : " Tag"); 1265 ahc_abort_scbs(ahc, target, channel, 1266 saved_lun, tag, 1267 ROLE_INITIATOR, 1268 CAM_REQ_ABORTED); 1269 printerror = 0; 1270 } else if (ahc_sent_msg(ahc, AHCMSG_1B, 1271 MSG_BUS_DEV_RESET, TRUE)) { 1272 #ifdef __FreeBSD__ 1273 /* 1274 * Don't mark the user's request for this BDR 1275 * as completing with CAM_BDR_SENT. CAM3 1276 * specifies CAM_REQ_CMP. 1277 */ 1278 if (scb != NULL 1279 && scb->io_ctx->ccb_h.func_code== XPT_RESET_DEV 1280 && ahc_match_scb(ahc, scb, target, channel, 1281 CAM_LUN_WILDCARD, 1282 SCB_LIST_NULL, 1283 ROLE_INITIATOR)) { 1284 ahc_set_transaction_status(scb, 1285 CAM_REQ_CMP); 1286 } 1287 #endif 1288 ahc_compile_devinfo(&devinfo, 1289 initiator_role_id, 1290 target, 1291 CAM_LUN_WILDCARD, 1292 channel, 1293 ROLE_INITIATOR); 1294 ahc_handle_devreset(ahc, &devinfo, 1295 CAM_BDR_SENT, 1296 "Bus Device Reset", 1297 /*verbose_level*/0); 1298 printerror = 0; 1299 } else if (ahc_sent_msg(ahc, AHCMSG_EXT, 1300 MSG_EXT_PPR, FALSE)) { 1301 struct ahc_initiator_tinfo *tinfo; 1302 struct ahc_tmode_tstate *tstate; 1303 1304 /* 1305 * PPR Rejected. Try non-ppr negotiation 1306 * and retry command. 1307 */ 1308 tinfo = ahc_fetch_transinfo(ahc, 1309 devinfo.channel, 1310 devinfo.our_scsiid, 1311 devinfo.target, 1312 &tstate); 1313 tinfo->curr.transport_version = 2; 1314 tinfo->goal.transport_version = 2; 1315 tinfo->goal.ppr_options = 0; 1316 ahc_qinfifo_requeue_tail(ahc, scb); 1317 printerror = 0; 1318 } else if (ahc_sent_msg(ahc, AHCMSG_EXT, 1319 MSG_EXT_WDTR, FALSE) 1320 || ahc_sent_msg(ahc, AHCMSG_EXT, 1321 MSG_EXT_SDTR, FALSE)) { 1322 /* 1323 * Negotiation Rejected. Go-async and 1324 * retry command. 1325 */ 1326 ahc_set_width(ahc, &devinfo, 1327 MSG_EXT_WDTR_BUS_8_BIT, 1328 AHC_TRANS_CUR|AHC_TRANS_GOAL, 1329 /*paused*/TRUE); 1330 ahc_set_syncrate(ahc, &devinfo, 1331 /*syncrate*/NULL, 1332 /*period*/0, /*offset*/0, 1333 /*ppr_options*/0, 1334 AHC_TRANS_CUR|AHC_TRANS_GOAL, 1335 /*paused*/TRUE); 1336 ahc_qinfifo_requeue_tail(ahc, scb); 1337 printerror = 0; 1338 } 1339 } 1340 if (printerror != 0) { 1341 u_int i; 1342 1343 if (scb != NULL) { 1344 u_int tag; 1345 1346 if ((scb->hscb->control & TAG_ENB) != 0) 1347 tag = scb->hscb->tag; 1348 else 1349 tag = SCB_LIST_NULL; 1350 ahc_print_path(ahc, scb); 1351 ahc_abort_scbs(ahc, target, channel, 1352 SCB_GET_LUN(scb), tag, 1353 ROLE_INITIATOR, 1354 CAM_UNEXP_BUSFREE); 1355 } else { 1356 /* 1357 * We had not fully identified this connection, 1358 * so we cannot abort anything. 1359 */ 1360 printf("%s: ", ahc_name(ahc)); 1361 } 1362 for (i = 0; i < num_phases; i++) { 1363 if (lastphase == ahc_phase_table[i].phase) 1364 break; 1365 } 1366 /* 1367 * Renegotiate with this device at the 1368 * next opportunity just in case this busfree 1369 * is due to a negotiation mismatch with the 1370 * device. 1371 */ 1372 ahc_force_renegotiation(ahc); 1373 printf("Unexpected busfree %s\n" 1374 "SEQADDR == 0x%x\n", 1375 ahc_phase_table[i].phasemsg, 1376 ahc_inb(ahc, SEQADDR0) 1377 | (ahc_inb(ahc, SEQADDR1) << 8)); 1378 } 1379 ahc_outb(ahc, CLRINT, CLRSCSIINT); 1380 ahc_restart(ahc); 1381 } else { 1382 printf("%s: Missing case in ahc_handle_scsiint. status = %x\n", 1383 ahc_name(ahc), status); 1384 ahc_outb(ahc, CLRINT, CLRSCSIINT); 1385 } 1386 } 1387 1388 /* 1389 * Force renegotiation to occur the next time we initiate 1390 * a command to the current device. 1391 */ 1392 static void 1393 ahc_force_renegotiation(struct ahc_softc *ahc) 1394 { 1395 struct ahc_devinfo devinfo; 1396 struct ahc_initiator_tinfo *targ_info; 1397 struct ahc_tmode_tstate *tstate; 1398 1399 ahc_fetch_devinfo(ahc, &devinfo); 1400 targ_info = ahc_fetch_transinfo(ahc, 1401 devinfo.channel, 1402 devinfo.our_scsiid, 1403 devinfo.target, 1404 &tstate); 1405 ahc_update_neg_request(ahc, &devinfo, tstate, 1406 targ_info, AHC_NEG_IF_NON_ASYNC); 1407 } 1408 1409 #define AHC_MAX_STEPS 2000 1410 void 1411 ahc_clear_critical_section(struct ahc_softc *ahc) 1412 { 1413 int stepping; 1414 int steps; 1415 u_int simode0; 1416 u_int simode1; 1417 1418 if (ahc->num_critical_sections == 0) 1419 return; 1420 1421 stepping = FALSE; 1422 steps = 0; 1423 simode0 = 0; 1424 simode1 = 0; 1425 for (;;) { 1426 struct cs *cs; 1427 u_int seqaddr; 1428 u_int i; 1429 1430 seqaddr = ahc_inb(ahc, SEQADDR0) 1431 | (ahc_inb(ahc, SEQADDR1) << 8); 1432 1433 /* 1434 * Seqaddr represents the next instruction to execute, 1435 * so we are really executing the instruction just 1436 * before it. 1437 */ 1438 if (seqaddr != 0) 1439 seqaddr -= 1; 1440 cs = ahc->critical_sections; 1441 for (i = 0; i < ahc->num_critical_sections; i++, cs++) { 1442 1443 if (cs->begin < seqaddr && cs->end >= seqaddr) 1444 break; 1445 } 1446 1447 if (i == ahc->num_critical_sections) 1448 break; 1449 1450 if (steps > AHC_MAX_STEPS) { 1451 printf("%s: Infinite loop in critical section\n", 1452 ahc_name(ahc)); 1453 ahc_dump_card_state(ahc); 1454 panic("critical section loop"); 1455 } 1456 1457 steps++; 1458 if (stepping == FALSE) { 1459 1460 /* 1461 * Disable all interrupt sources so that the 1462 * sequencer will not be stuck by a pausing 1463 * interrupt condition while we attempt to 1464 * leave a critical section. 1465 */ 1466 simode0 = ahc_inb(ahc, SIMODE0); 1467 ahc_outb(ahc, SIMODE0, 0); 1468 simode1 = ahc_inb(ahc, SIMODE1); 1469 if ((ahc->features & AHC_DT) != 0) 1470 /* 1471 * On DT class controllers, we 1472 * use the enhanced busfree logic. 1473 * Unfortunately we cannot re-enable 1474 * busfree detection within the 1475 * current connection, so we must 1476 * leave it on while single stepping. 1477 */ 1478 ahc_outb(ahc, SIMODE1, ENBUSFREE); 1479 else 1480 ahc_outb(ahc, SIMODE1, 0); 1481 ahc_outb(ahc, CLRINT, CLRSCSIINT); 1482 ahc_outb(ahc, SEQCTL, ahc_inb(ahc, SEQCTL) | STEP); 1483 stepping = TRUE; 1484 } 1485 if ((ahc->features & AHC_DT) != 0) { 1486 ahc_outb(ahc, CLRSINT1, CLRBUSFREE); 1487 ahc_outb(ahc, CLRINT, CLRSCSIINT); 1488 } 1489 ahc_outb(ahc, HCNTRL, ahc->unpause); 1490 while (!ahc_is_paused(ahc)) 1491 ahc_delay(200); 1492 } 1493 if (stepping) { 1494 ahc_outb(ahc, SIMODE0, simode0); 1495 ahc_outb(ahc, SIMODE1, simode1); 1496 ahc_outb(ahc, SEQCTL, ahc_inb(ahc, SEQCTL) & ~STEP); 1497 } 1498 } 1499 1500 /* 1501 * Clear any pending interrupt status. 1502 */ 1503 void 1504 ahc_clear_intstat(struct ahc_softc *ahc) 1505 { 1506 /* Clear any interrupt conditions this may have caused */ 1507 ahc_outb(ahc, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI 1508 |CLRBUSFREE|CLRSCSIPERR|CLRPHASECHG| 1509 CLRREQINIT); 1510 ahc_flush_device_writes(ahc); 1511 ahc_outb(ahc, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO); 1512 ahc_flush_device_writes(ahc); 1513 ahc_outb(ahc, CLRINT, CLRSCSIINT); 1514 ahc_flush_device_writes(ahc); 1515 } 1516 1517 /**************************** Debugging Routines ******************************/ 1518 #ifdef AHC_DEBUG 1519 uint32_t ahc_debug = 0; /* AHC_SHOW_MISC|AHC_SHOW_SENSE|AHC_DEBUG_OPTS;*/ 1520 #endif 1521 1522 void 1523 ahc_print_scb(struct scb *scb) 1524 { 1525 int i; 1526 1527 struct hardware_scb *hscb = scb->hscb; 1528 1529 printf("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n", 1530 (void *)scb, 1531 hscb->control, 1532 hscb->scsiid, 1533 hscb->lun, 1534 hscb->cdb_len); 1535 printf("Shared Data: "); 1536 for (i = 0; i < sizeof(hscb->shared_data.cdb); i++) 1537 printf("%#02x", hscb->shared_data.cdb[i]); 1538 printf(" dataptr:%#x datacnt:%#x sgptr:%#x tag:%#x\n", 1539 ahc_le32toh(hscb->dataptr), 1540 ahc_le32toh(hscb->datacnt), 1541 ahc_le32toh(hscb->sgptr), 1542 hscb->tag); 1543 if (scb->sg_count > 0) { 1544 for (i = 0; i < scb->sg_count; i++) { 1545 printf("sg[%d] - Addr 0x%x%x : Length %d\n", 1546 i, 1547 (ahc_le32toh(scb->sg_list[i].len) >> 24 1548 & SG_HIGH_ADDR_BITS), 1549 ahc_le32toh(scb->sg_list[i].addr), 1550 ahc_le32toh(scb->sg_list[i].len)); 1551 } 1552 } 1553 } 1554 1555 /************************* Transfer Negotiation *******************************/ 1556 /* 1557 * Allocate per target mode instance (ID we respond to as a target) 1558 * transfer negotiation data structures. 1559 */ 1560 static struct ahc_tmode_tstate * 1561 ahc_alloc_tstate(struct ahc_softc *ahc, u_int scsi_id, char channel) 1562 { 1563 struct ahc_tmode_tstate *master_tstate; 1564 struct ahc_tmode_tstate *tstate; 1565 int i; 1566 1567 master_tstate = ahc->enabled_targets[ahc->our_id]; 1568 if (channel == 'B') { 1569 scsi_id += 8; 1570 master_tstate = ahc->enabled_targets[ahc->our_id_b + 8]; 1571 } 1572 if (ahc->enabled_targets[scsi_id] != NULL 1573 && ahc->enabled_targets[scsi_id] != master_tstate) 1574 panic("%s: ahc_alloc_tstate - Target already allocated", 1575 ahc_name(ahc)); 1576 tstate = malloc(sizeof(*tstate), M_DEVBUF, M_WAITOK); 1577 1578 /* 1579 * If we have allocated a master tstate, copy user settings from 1580 * the master tstate (taken from SRAM or the EEPROM) for this 1581 * channel, but reset our current and goal settings to async/narrow 1582 * until an initiator talks to us. 1583 */ 1584 if (master_tstate != NULL) { 1585 memcpy(tstate, master_tstate, sizeof(*tstate)); 1586 memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns)); 1587 tstate->ultraenb = 0; 1588 for (i = 0; i < AHC_NUM_TARGETS; i++) { 1589 memset(&tstate->transinfo[i].curr, 0, 1590 sizeof(tstate->transinfo[i].curr)); 1591 memset(&tstate->transinfo[i].goal, 0, 1592 sizeof(tstate->transinfo[i].goal)); 1593 } 1594 } else 1595 memset(tstate, 0, sizeof(*tstate)); 1596 ahc->enabled_targets[scsi_id] = tstate; 1597 return (tstate); 1598 } 1599 1600 #ifdef AHC_TARGET_MODE 1601 /* 1602 * Free per target mode instance (ID we respond to as a target) 1603 * transfer negotiation data structures. 1604 */ 1605 static void 1606 ahc_free_tstate(struct ahc_softc *ahc, u_int scsi_id, char channel, int force) 1607 { 1608 struct ahc_tmode_tstate *tstate; 1609 1610 /* 1611 * Don't clean up our "master" tstate. 1612 * It has our default user settings. 1613 */ 1614 if (((channel == 'B' && scsi_id == ahc->our_id_b) 1615 || (channel == 'A' && scsi_id == ahc->our_id)) 1616 && force == FALSE) 1617 return; 1618 1619 if (channel == 'B') 1620 scsi_id += 8; 1621 tstate = ahc->enabled_targets[scsi_id]; 1622 if (tstate != NULL) 1623 free(tstate, M_DEVBUF); 1624 ahc->enabled_targets[scsi_id] = NULL; 1625 } 1626 #endif 1627 1628 /* 1629 * Called when we have an active connection to a target on the bus, 1630 * this function finds the nearest syncrate to the input period limited 1631 * by the capabilities of the bus connectivity of and sync settings for 1632 * the target. 1633 */ 1634 struct ahc_syncrate * 1635 ahc_devlimited_syncrate(struct ahc_softc *ahc, 1636 struct ahc_initiator_tinfo *tinfo, 1637 u_int *period, u_int *ppr_options, role_t role) 1638 { 1639 struct ahc_transinfo *transinfo; 1640 u_int maxsync; 1641 1642 if ((ahc->features & AHC_ULTRA2) != 0) { 1643 if ((ahc_inb(ahc, SBLKCTL) & ENAB40) != 0 1644 && (ahc_inb(ahc, SSTAT2) & EXP_ACTIVE) == 0) { 1645 maxsync = AHC_SYNCRATE_DT; 1646 } else { 1647 maxsync = AHC_SYNCRATE_ULTRA; 1648 /* Can't do DT on an SE bus */ 1649 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 1650 } 1651 } else if ((ahc->features & AHC_ULTRA) != 0) { 1652 maxsync = AHC_SYNCRATE_ULTRA; 1653 } else { 1654 maxsync = AHC_SYNCRATE_FAST; 1655 } 1656 /* 1657 * Never allow a value higher than our current goal 1658 * period otherwise we may allow a target initiated 1659 * negotiation to go above the limit as set by the 1660 * user. In the case of an initiator initiated 1661 * sync negotiation, we limit based on the user 1662 * setting. This allows the system to still accept 1663 * incoming negotiations even if target initiated 1664 * negotiation is not performed. 1665 */ 1666 if (role == ROLE_TARGET) 1667 transinfo = &tinfo->user; 1668 else 1669 transinfo = &tinfo->goal; 1670 *ppr_options &= transinfo->ppr_options; 1671 if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) { 1672 maxsync = MAX(maxsync, AHC_SYNCRATE_ULTRA2); 1673 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 1674 } 1675 if (transinfo->period == 0) { 1676 *period = 0; 1677 *ppr_options = 0; 1678 return (NULL); 1679 } 1680 *period = MAX(*period, transinfo->period); 1681 return (ahc_find_syncrate(ahc, period, ppr_options, maxsync)); 1682 } 1683 1684 /* 1685 * Look up the valid period to SCSIRATE conversion in our table. 1686 * Return the period and offset that should be sent to the target 1687 * if this was the beginning of an SDTR. 1688 */ 1689 struct ahc_syncrate * 1690 ahc_find_syncrate(struct ahc_softc *ahc, u_int *period, 1691 u_int *ppr_options, u_int maxsync) 1692 { 1693 struct ahc_syncrate *syncrate; 1694 1695 if ((ahc->features & AHC_DT) == 0) 1696 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 1697 1698 /* Skip all DT only entries if DT is not available */ 1699 if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0 1700 && maxsync < AHC_SYNCRATE_ULTRA2) 1701 maxsync = AHC_SYNCRATE_ULTRA2; 1702 1703 for (syncrate = &ahc_syncrates[maxsync]; 1704 syncrate->rate != NULL; 1705 syncrate++) { 1706 1707 /* 1708 * The Ultra2 table doesn't go as low 1709 * as for the Fast/Ultra cards. 1710 */ 1711 if ((ahc->features & AHC_ULTRA2) != 0 1712 && (syncrate->sxfr_u2 == 0)) 1713 break; 1714 1715 if (*period <= syncrate->period) { 1716 /* 1717 * When responding to a target that requests 1718 * sync, the requested rate may fall between 1719 * two rates that we can output, but still be 1720 * a rate that we can receive. Because of this, 1721 * we want to respond to the target with 1722 * the same rate that it sent to us even 1723 * if the period we use to send data to it 1724 * is lower. Only lower the response period 1725 * if we must. 1726 */ 1727 if (syncrate == &ahc_syncrates[maxsync]) 1728 *period = syncrate->period; 1729 1730 /* 1731 * At some speeds, we only support 1732 * ST transfers. 1733 */ 1734 if ((syncrate->sxfr_u2 & ST_SXFR) != 0) 1735 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 1736 break; 1737 } 1738 } 1739 1740 if ((*period == 0) 1741 || (syncrate->rate == NULL) 1742 || ((ahc->features & AHC_ULTRA2) != 0 1743 && (syncrate->sxfr_u2 == 0))) { 1744 /* Use asynchronous transfers. */ 1745 *period = 0; 1746 syncrate = NULL; 1747 *ppr_options &= ~MSG_EXT_PPR_DT_REQ; 1748 } 1749 return (syncrate); 1750 } 1751 1752 /* 1753 * Convert from an entry in our syncrate table to the SCSI equivalent 1754 * sync "period" factor. 1755 */ 1756 u_int 1757 ahc_find_period(struct ahc_softc *ahc, u_int scsirate, u_int maxsync) 1758 { 1759 struct ahc_syncrate *syncrate; 1760 1761 if ((ahc->features & AHC_ULTRA2) != 0) 1762 scsirate &= SXFR_ULTRA2; 1763 else 1764 scsirate &= SXFR; 1765 1766 syncrate = &ahc_syncrates[maxsync]; 1767 while (syncrate->rate != NULL) { 1768 1769 if ((ahc->features & AHC_ULTRA2) != 0) { 1770 if (syncrate->sxfr_u2 == 0) 1771 break; 1772 else if (scsirate == (syncrate->sxfr_u2 & SXFR_ULTRA2)) 1773 return (syncrate->period); 1774 } else if (scsirate == (syncrate->sxfr & SXFR)) { 1775 return (syncrate->period); 1776 } 1777 syncrate++; 1778 } 1779 return (0); /* async */ 1780 } 1781 1782 /* 1783 * Truncate the given synchronous offset to a value the 1784 * current adapter type and syncrate are capable of. 1785 */ 1786 void 1787 ahc_validate_offset(struct ahc_softc *ahc, 1788 struct ahc_initiator_tinfo *tinfo, 1789 struct ahc_syncrate *syncrate, 1790 u_int *offset, int wide, role_t role) 1791 { 1792 u_int maxoffset; 1793 1794 /* Limit offset to what we can do */ 1795 if (syncrate == NULL) { 1796 maxoffset = 0; 1797 } else if ((ahc->features & AHC_ULTRA2) != 0) { 1798 maxoffset = MAX_OFFSET_ULTRA2; 1799 } else { 1800 if (wide) 1801 maxoffset = MAX_OFFSET_16BIT; 1802 else 1803 maxoffset = MAX_OFFSET_8BIT; 1804 } 1805 *offset = MIN(*offset, maxoffset); 1806 if (tinfo != NULL) { 1807 if (role == ROLE_TARGET) 1808 *offset = MIN(*offset, tinfo->user.offset); 1809 else 1810 *offset = MIN(*offset, tinfo->goal.offset); 1811 } 1812 } 1813 1814 /* 1815 * Truncate the given transfer width parameter to a value the 1816 * current adapter type is capable of. 1817 */ 1818 void 1819 ahc_validate_width(struct ahc_softc *ahc, struct ahc_initiator_tinfo *tinfo, 1820 u_int *bus_width, role_t role) 1821 { 1822 switch (*bus_width) { 1823 default: 1824 if (ahc->features & AHC_WIDE) { 1825 /* Respond Wide */ 1826 *bus_width = MSG_EXT_WDTR_BUS_16_BIT; 1827 break; 1828 } 1829 /* FALLTHROUGH */ 1830 case MSG_EXT_WDTR_BUS_8_BIT: 1831 *bus_width = MSG_EXT_WDTR_BUS_8_BIT; 1832 break; 1833 } 1834 if (tinfo != NULL) { 1835 if (role == ROLE_TARGET) 1836 *bus_width = MIN(tinfo->user.width, *bus_width); 1837 else 1838 *bus_width = MIN(tinfo->goal.width, *bus_width); 1839 } 1840 } 1841 1842 /* 1843 * Update the bitmask of targets for which the controller should 1844 * negotiate with at the next convenient opportunity. This currently 1845 * means the next time we send the initial identify messages for 1846 * a new transaction. 1847 */ 1848 int 1849 ahc_update_neg_request(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 1850 struct ahc_tmode_tstate *tstate, 1851 struct ahc_initiator_tinfo *tinfo, ahc_neg_type neg_type) 1852 { 1853 u_int auto_negotiate_orig; 1854 1855 auto_negotiate_orig = tstate->auto_negotiate; 1856 if (neg_type == AHC_NEG_ALWAYS) { 1857 /* 1858 * Force our "current" settings to be 1859 * unknown so that unless a bus reset 1860 * occurs the need to renegotiate is 1861 * recorded persistently. 1862 */ 1863 if ((ahc->features & AHC_WIDE) != 0) 1864 tinfo->curr.width = AHC_WIDTH_UNKNOWN; 1865 tinfo->curr.period = AHC_PERIOD_UNKNOWN; 1866 tinfo->curr.offset = AHC_OFFSET_UNKNOWN; 1867 } 1868 if (tinfo->curr.period != tinfo->goal.period 1869 || tinfo->curr.width != tinfo->goal.width 1870 || tinfo->curr.offset != tinfo->goal.offset 1871 || tinfo->curr.ppr_options != tinfo->goal.ppr_options 1872 || (neg_type == AHC_NEG_IF_NON_ASYNC 1873 && (tinfo->goal.offset != 0 1874 || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT 1875 || tinfo->goal.ppr_options != 0))) 1876 tstate->auto_negotiate |= devinfo->target_mask; 1877 else 1878 tstate->auto_negotiate &= ~devinfo->target_mask; 1879 1880 return (auto_negotiate_orig != tstate->auto_negotiate); 1881 } 1882 1883 /* 1884 * Update the user/goal/curr tables of synchronous negotiation 1885 * parameters as well as, in the case of a current or active update, 1886 * any data structures on the host controller. In the case of an 1887 * active update, the specified target is currently talking to us on 1888 * the bus, so the transfer parameter update must take effect 1889 * immediately. 1890 */ 1891 void 1892 ahc_set_syncrate(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 1893 struct ahc_syncrate *syncrate, u_int period, 1894 u_int offset, u_int ppr_options, u_int type, int paused) 1895 { 1896 struct ahc_initiator_tinfo *tinfo; 1897 struct ahc_tmode_tstate *tstate; 1898 u_int old_period; 1899 u_int old_offset; 1900 u_int old_ppr; 1901 int active; 1902 int update_needed; 1903 1904 active = (type & AHC_TRANS_ACTIVE) == AHC_TRANS_ACTIVE; 1905 update_needed = 0; 1906 1907 if (syncrate == NULL) { 1908 period = 0; 1909 offset = 0; 1910 } 1911 1912 tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid, 1913 devinfo->target, &tstate); 1914 1915 if ((type & AHC_TRANS_USER) != 0) { 1916 tinfo->user.period = period; 1917 tinfo->user.offset = offset; 1918 tinfo->user.ppr_options = ppr_options; 1919 } 1920 1921 if ((type & AHC_TRANS_GOAL) != 0) { 1922 tinfo->goal.period = period; 1923 tinfo->goal.offset = offset; 1924 tinfo->goal.ppr_options = ppr_options; 1925 } 1926 1927 old_period = tinfo->curr.period; 1928 old_offset = tinfo->curr.offset; 1929 old_ppr = tinfo->curr.ppr_options; 1930 1931 if ((type & AHC_TRANS_CUR) != 0 1932 && (old_period != period 1933 || old_offset != offset 1934 || old_ppr != ppr_options)) { 1935 u_int scsirate; 1936 1937 update_needed++; 1938 scsirate = tinfo->scsirate; 1939 if ((ahc->features & AHC_ULTRA2) != 0) { 1940 1941 scsirate &= ~(SXFR_ULTRA2|SINGLE_EDGE|ENABLE_CRC); 1942 if (syncrate != NULL) { 1943 scsirate |= syncrate->sxfr_u2; 1944 if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0) 1945 scsirate |= ENABLE_CRC; 1946 else 1947 scsirate |= SINGLE_EDGE; 1948 } 1949 } else { 1950 1951 scsirate &= ~(SXFR|SOFS); 1952 /* 1953 * Ensure Ultra mode is set properly for 1954 * this target. 1955 */ 1956 tstate->ultraenb &= ~devinfo->target_mask; 1957 if (syncrate != NULL) { 1958 if (syncrate->sxfr & ULTRA_SXFR) { 1959 tstate->ultraenb |= 1960 devinfo->target_mask; 1961 } 1962 scsirate |= syncrate->sxfr & SXFR; 1963 scsirate |= offset & SOFS; 1964 } 1965 if (active) { 1966 u_int sxfrctl0; 1967 1968 sxfrctl0 = ahc_inb(ahc, SXFRCTL0); 1969 sxfrctl0 &= ~FAST20; 1970 if (tstate->ultraenb & devinfo->target_mask) 1971 sxfrctl0 |= FAST20; 1972 ahc_outb(ahc, SXFRCTL0, sxfrctl0); 1973 } 1974 } 1975 if (active) { 1976 ahc_outb(ahc, SCSIRATE, scsirate); 1977 if ((ahc->features & AHC_ULTRA2) != 0) 1978 ahc_outb(ahc, SCSIOFFSET, offset); 1979 } 1980 1981 tinfo->scsirate = scsirate; 1982 tinfo->curr.period = period; 1983 tinfo->curr.offset = offset; 1984 tinfo->curr.ppr_options = ppr_options; 1985 1986 ahc_send_async(ahc, devinfo->channel, devinfo->target, 1987 CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL); 1988 if (bootverbose) { 1989 if (offset != 0) { 1990 printf("%s: target %d synchronous at %sMHz%s, " 1991 "offset = 0x%x\n", ahc_name(ahc), 1992 devinfo->target, syncrate->rate, 1993 (ppr_options & MSG_EXT_PPR_DT_REQ) 1994 ? " DT" : "", offset); 1995 } else { 1996 printf("%s: target %d using " 1997 "asynchronous transfers\n", 1998 ahc_name(ahc), devinfo->target); 1999 } 2000 } 2001 } 2002 2003 update_needed += ahc_update_neg_request(ahc, devinfo, tstate, 2004 tinfo, AHC_NEG_TO_GOAL); 2005 2006 if (update_needed) 2007 ahc_update_pending_scbs(ahc); 2008 } 2009 2010 /* 2011 * Update the user/goal/curr tables of wide negotiation 2012 * parameters as well as, in the case of a current or active update, 2013 * any data structures on the host controller. In the case of an 2014 * active update, the specified target is currently talking to us on 2015 * the bus, so the transfer parameter update must take effect 2016 * immediately. 2017 */ 2018 void 2019 ahc_set_width(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 2020 u_int width, u_int type, int paused) 2021 { 2022 struct ahc_initiator_tinfo *tinfo; 2023 struct ahc_tmode_tstate *tstate; 2024 u_int oldwidth; 2025 int active; 2026 int update_needed; 2027 2028 active = (type & AHC_TRANS_ACTIVE) == AHC_TRANS_ACTIVE; 2029 update_needed = 0; 2030 tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid, 2031 devinfo->target, &tstate); 2032 2033 if ((type & AHC_TRANS_USER) != 0) 2034 tinfo->user.width = width; 2035 2036 if ((type & AHC_TRANS_GOAL) != 0) 2037 tinfo->goal.width = width; 2038 2039 oldwidth = tinfo->curr.width; 2040 if ((type & AHC_TRANS_CUR) != 0 && oldwidth != width) { 2041 u_int scsirate; 2042 2043 update_needed++; 2044 scsirate = tinfo->scsirate; 2045 scsirate &= ~WIDEXFER; 2046 if (width == MSG_EXT_WDTR_BUS_16_BIT) 2047 scsirate |= WIDEXFER; 2048 2049 tinfo->scsirate = scsirate; 2050 2051 if (active) 2052 ahc_outb(ahc, SCSIRATE, scsirate); 2053 2054 tinfo->curr.width = width; 2055 2056 ahc_send_async(ahc, devinfo->channel, devinfo->target, 2057 CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL); 2058 if (bootverbose) { 2059 printf("%s: target %d using %dbit transfers\n", 2060 ahc_name(ahc), devinfo->target, 2061 8 * (0x01 << width)); 2062 } 2063 } 2064 2065 update_needed += ahc_update_neg_request(ahc, devinfo, tstate, 2066 tinfo, AHC_NEG_TO_GOAL); 2067 if (update_needed) 2068 ahc_update_pending_scbs(ahc); 2069 } 2070 2071 /* 2072 * Update the current state of tagged queuing for a given target. 2073 */ 2074 void 2075 ahc_set_tags(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 2076 ahc_queue_alg alg) 2077 { 2078 ahc_platform_set_tags(ahc, devinfo, alg); 2079 } 2080 2081 /* 2082 * When the transfer settings for a connection change, update any 2083 * in-transit SCBs to contain the new data so the hardware will 2084 * be set correctly during future (re)selections. 2085 */ 2086 static void 2087 ahc_update_pending_scbs(struct ahc_softc *ahc) 2088 { 2089 struct scb *pending_scb; 2090 int pending_scb_count; 2091 int i; 2092 int paused; 2093 u_int saved_scbptr; 2094 2095 /* 2096 * Traverse the pending SCB list and ensure that all of the 2097 * SCBs there have the proper settings. 2098 */ 2099 pending_scb_count = 0; 2100 LIST_FOREACH(pending_scb, &ahc->pending_scbs, pending_links) { 2101 struct ahc_devinfo devinfo; 2102 struct hardware_scb *pending_hscb; 2103 struct ahc_initiator_tinfo *tinfo; 2104 struct ahc_tmode_tstate *tstate; 2105 2106 ahc_scb_devinfo(ahc, &devinfo, pending_scb); 2107 tinfo = ahc_fetch_transinfo(ahc, devinfo.channel, 2108 devinfo.our_scsiid, 2109 devinfo.target, &tstate); 2110 pending_hscb = pending_scb->hscb; 2111 pending_hscb->control &= ~ULTRAENB; 2112 if ((tstate->ultraenb & devinfo.target_mask) != 0) 2113 pending_hscb->control |= ULTRAENB; 2114 pending_hscb->scsirate = tinfo->scsirate; 2115 pending_hscb->scsioffset = tinfo->curr.offset; 2116 if ((tstate->auto_negotiate & devinfo.target_mask) == 0 2117 && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) { 2118 pending_scb->flags &= ~SCB_AUTO_NEGOTIATE; 2119 pending_hscb->control &= ~MK_MESSAGE; 2120 } 2121 ahc_sync_scb(ahc, pending_scb, 2122 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 2123 pending_scb_count++; 2124 } 2125 2126 if (pending_scb_count == 0) 2127 return; 2128 2129 if (ahc_is_paused(ahc)) { 2130 paused = 1; 2131 } else { 2132 paused = 0; 2133 ahc_pause(ahc); 2134 } 2135 2136 saved_scbptr = ahc_inb(ahc, SCBPTR); 2137 /* Ensure that the hscbs down on the card match the new information */ 2138 for (i = 0; i < ahc->scb_data->maxhscbs; i++) { 2139 struct hardware_scb *pending_hscb; 2140 u_int control; 2141 u_int scb_tag; 2142 2143 ahc_outb(ahc, SCBPTR, i); 2144 scb_tag = ahc_inb(ahc, SCB_TAG); 2145 pending_scb = ahc_lookup_scb(ahc, scb_tag); 2146 if (pending_scb == NULL) 2147 continue; 2148 2149 pending_hscb = pending_scb->hscb; 2150 control = ahc_inb(ahc, SCB_CONTROL); 2151 control &= ~(ULTRAENB|MK_MESSAGE); 2152 control |= pending_hscb->control & (ULTRAENB|MK_MESSAGE); 2153 ahc_outb(ahc, SCB_CONTROL, control); 2154 ahc_outb(ahc, SCB_SCSIRATE, pending_hscb->scsirate); 2155 ahc_outb(ahc, SCB_SCSIOFFSET, pending_hscb->scsioffset); 2156 } 2157 ahc_outb(ahc, SCBPTR, saved_scbptr); 2158 2159 if (paused == 0) 2160 ahc_unpause(ahc); 2161 } 2162 2163 /**************************** Pathing Information *****************************/ 2164 static void 2165 ahc_fetch_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo) 2166 { 2167 u_int saved_scsiid; 2168 role_t role; 2169 int our_id; 2170 2171 if (ahc_inb(ahc, SSTAT0) & TARGET) 2172 role = ROLE_TARGET; 2173 else 2174 role = ROLE_INITIATOR; 2175 2176 if (role == ROLE_TARGET 2177 && (ahc->features & AHC_MULTI_TID) != 0 2178 && (ahc_inb(ahc, SEQ_FLAGS) 2179 & (CMDPHASE_PENDING|TARG_CMD_PENDING|NO_DISCONNECT)) != 0) { 2180 /* We were selected, so pull our id from TARGIDIN */ 2181 our_id = ahc_inb(ahc, TARGIDIN) & OID; 2182 } else if ((ahc->features & AHC_ULTRA2) != 0) 2183 our_id = ahc_inb(ahc, SCSIID_ULTRA2) & OID; 2184 else 2185 our_id = ahc_inb(ahc, SCSIID) & OID; 2186 2187 saved_scsiid = ahc_inb(ahc, SAVED_SCSIID); 2188 ahc_compile_devinfo(devinfo, 2189 our_id, 2190 SCSIID_TARGET(ahc, saved_scsiid), 2191 ahc_inb(ahc, SAVED_LUN), 2192 SCSIID_CHANNEL(ahc, saved_scsiid), 2193 role); 2194 } 2195 2196 struct ahc_phase_table_entry* 2197 ahc_lookup_phase_entry(int phase) 2198 { 2199 struct ahc_phase_table_entry *entry; 2200 struct ahc_phase_table_entry *last_entry; 2201 2202 /* 2203 * num_phases doesn't include the default entry which 2204 * will be returned if the phase doesn't match. 2205 */ 2206 last_entry = &ahc_phase_table[num_phases]; 2207 for (entry = ahc_phase_table; entry < last_entry; entry++) { 2208 if (phase == entry->phase) 2209 break; 2210 } 2211 return (entry); 2212 } 2213 2214 void 2215 ahc_compile_devinfo(struct ahc_devinfo *devinfo, u_int our_id, u_int target, 2216 u_int lun, char channel, role_t role) 2217 { 2218 devinfo->our_scsiid = our_id; 2219 devinfo->target = target; 2220 devinfo->lun = lun; 2221 devinfo->target_offset = target; 2222 devinfo->channel = channel; 2223 devinfo->role = role; 2224 if (channel == 'B') 2225 devinfo->target_offset += 8; 2226 devinfo->target_mask = (0x01 << devinfo->target_offset); 2227 } 2228 2229 void 2230 ahc_print_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo) 2231 { 2232 printf("%s:%c:%d:%d: ", ahc_name(ahc), devinfo->channel, 2233 devinfo->target, devinfo->lun); 2234 } 2235 2236 static void 2237 ahc_scb_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 2238 struct scb *scb) 2239 { 2240 role_t role; 2241 int our_id; 2242 2243 our_id = SCSIID_OUR_ID(scb->hscb->scsiid); 2244 role = ROLE_INITIATOR; 2245 if ((scb->flags & SCB_TARGET_SCB) != 0) 2246 role = ROLE_TARGET; 2247 ahc_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahc, scb), 2248 SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahc, scb), role); 2249 } 2250 2251 2252 /************************ Message Phase Processing ****************************/ 2253 static void 2254 ahc_assert_atn(struct ahc_softc *ahc) 2255 { 2256 u_int scsisigo; 2257 2258 scsisigo = ATNO; 2259 if ((ahc->features & AHC_DT) == 0) 2260 scsisigo |= ahc_inb(ahc, SCSISIGI); 2261 ahc_outb(ahc, SCSISIGO, scsisigo); 2262 } 2263 2264 /* 2265 * When an initiator transaction with the MK_MESSAGE flag either reconnects 2266 * or enters the initial message out phase, we are interrupted. Fill our 2267 * outgoing message buffer with the appropriate message and begin handing 2268 * the message phase(s) manually. 2269 */ 2270 static void 2271 ahc_setup_initiator_msgout(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 2272 struct scb *scb) 2273 { 2274 /* 2275 * To facilitate adding multiple messages together, 2276 * each routine should increment the index and len 2277 * variables instead of setting them explicitly. 2278 */ 2279 ahc->msgout_index = 0; 2280 ahc->msgout_len = 0; 2281 2282 if ((scb->flags & SCB_DEVICE_RESET) == 0 2283 && ahc_inb(ahc, MSG_OUT) == MSG_IDENTIFYFLAG) { 2284 u_int identify_msg; 2285 2286 identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb); 2287 if ((scb->hscb->control & DISCENB) != 0) 2288 identify_msg |= MSG_IDENTIFY_DISCFLAG; 2289 ahc->msgout_buf[ahc->msgout_index++] = identify_msg; 2290 ahc->msgout_len++; 2291 2292 if ((scb->hscb->control & TAG_ENB) != 0) { 2293 ahc->msgout_buf[ahc->msgout_index++] = 2294 scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE); 2295 ahc->msgout_buf[ahc->msgout_index++] = scb->hscb->tag; 2296 ahc->msgout_len += 2; 2297 } 2298 } 2299 2300 if (scb->flags & SCB_DEVICE_RESET) { 2301 ahc->msgout_buf[ahc->msgout_index++] = MSG_BUS_DEV_RESET; 2302 ahc->msgout_len++; 2303 ahc_print_path(ahc, scb); 2304 printf("Bus Device Reset Message Sent\n"); 2305 /* 2306 * Clear our selection hardware in advance of 2307 * the busfree. We may have an entry in the waiting 2308 * Q for this target, and we don't want to go about 2309 * selecting while we handle the busfree and blow it 2310 * away. 2311 */ 2312 ahc_outb(ahc, SCSISEQ, (ahc_inb(ahc, SCSISEQ) & ~ENSELO)); 2313 } else if ((scb->flags & SCB_ABORT) != 0) { 2314 if ((scb->hscb->control & TAG_ENB) != 0) 2315 ahc->msgout_buf[ahc->msgout_index++] = MSG_ABORT_TAG; 2316 else 2317 ahc->msgout_buf[ahc->msgout_index++] = MSG_ABORT; 2318 ahc->msgout_len++; 2319 ahc_print_path(ahc, scb); 2320 printf("Abort%s Message Sent\n", 2321 (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : ""); 2322 /* 2323 * Clear our selection hardware in advance of 2324 * the busfree. We may have an entry in the waiting 2325 * Q for this target, and we don't want to go about 2326 * selecting while we handle the busfree and blow it 2327 * away. 2328 */ 2329 ahc_outb(ahc, SCSISEQ, (ahc_inb(ahc, SCSISEQ) & ~ENSELO)); 2330 } else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) { 2331 ahc_build_transfer_msg(ahc, devinfo); 2332 } else { 2333 printf("ahc_intr: AWAITING_MSG for an SCB that " 2334 "does not have a waiting message\n"); 2335 printf("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid, 2336 devinfo->target_mask); 2337 panic("SCB = %d, SCB Control = %x, MSG_OUT = %x " 2338 "SCB flags = %x", scb->hscb->tag, scb->hscb->control, 2339 ahc_inb(ahc, MSG_OUT), scb->flags); 2340 } 2341 2342 /* 2343 * Clear the MK_MESSAGE flag from the SCB so we aren't 2344 * asked to send this message again. 2345 */ 2346 ahc_outb(ahc, SCB_CONTROL, ahc_inb(ahc, SCB_CONTROL) & ~MK_MESSAGE); 2347 scb->hscb->control &= ~MK_MESSAGE; 2348 ahc->msgout_index = 0; 2349 ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 2350 } 2351 2352 /* 2353 * Build an appropriate transfer negotiation message for the 2354 * currently active target. 2355 */ 2356 static void 2357 ahc_build_transfer_msg(struct ahc_softc *ahc, struct ahc_devinfo *devinfo) 2358 { 2359 /* 2360 * We need to initiate transfer negotiations. 2361 * If our current and goal settings are identical, 2362 * we want to renegotiate due to a check condition. 2363 */ 2364 struct ahc_initiator_tinfo *tinfo; 2365 struct ahc_tmode_tstate *tstate; 2366 struct ahc_syncrate *rate; 2367 int dowide; 2368 int dosync; 2369 int doppr; 2370 u_int period; 2371 u_int ppr_options; 2372 u_int offset; 2373 2374 tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid, 2375 devinfo->target, &tstate); 2376 /* 2377 * Filter our period based on the current connection. 2378 * If we can't perform DT transfers on this segment (not in LVD 2379 * mode for instance), then our decision to issue a PPR message 2380 * may change. 2381 */ 2382 period = tinfo->goal.period; 2383 ppr_options = tinfo->goal.ppr_options; 2384 /* Target initiated PPR is not allowed in the SCSI spec */ 2385 if (devinfo->role == ROLE_TARGET) 2386 ppr_options = 0; 2387 rate = ahc_devlimited_syncrate(ahc, tinfo, &period, 2388 &ppr_options, devinfo->role); 2389 dowide = tinfo->curr.width != tinfo->goal.width; 2390 dosync = tinfo->curr.period != period; 2391 /* 2392 * Only use PPR if we have options that need it, even if the device 2393 * claims to support it. There might be an expander in the way 2394 * that doesn't. 2395 */ 2396 doppr = ppr_options != 0; 2397 2398 if (!dowide && !dosync && !doppr) { 2399 dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT; 2400 dosync = tinfo->goal.offset != 0; 2401 } 2402 2403 if (!dowide && !dosync && !doppr) { 2404 /* 2405 * Force async with a WDTR message if we have a wide bus, 2406 * or just issue an SDTR with a 0 offset. 2407 */ 2408 if ((ahc->features & AHC_WIDE) != 0) 2409 dowide = 1; 2410 else 2411 dosync = 1; 2412 2413 if (bootverbose) { 2414 ahc_print_devinfo(ahc, devinfo); 2415 printf("Ensuring async\n"); 2416 } 2417 } 2418 2419 /* Target initiated PPR is not allowed in the SCSI spec */ 2420 if (devinfo->role == ROLE_TARGET) 2421 doppr = 0; 2422 2423 /* 2424 * Both the PPR message and SDTR message require the 2425 * goal syncrate to be limited to what the target device 2426 * is capable of handling (based on whether an LVD->SE 2427 * expander is on the bus), so combine these two cases. 2428 * Regardless, guarantee that if we are using WDTR and SDTR 2429 * messages that WDTR comes first. 2430 */ 2431 if (doppr || (dosync && !dowide)) { 2432 2433 offset = tinfo->goal.offset; 2434 ahc_validate_offset(ahc, tinfo, rate, &offset, 2435 doppr ? tinfo->goal.width 2436 : tinfo->curr.width, 2437 devinfo->role); 2438 if (doppr) { 2439 ahc_construct_ppr(ahc, devinfo, period, offset, 2440 tinfo->goal.width, ppr_options); 2441 } else { 2442 ahc_construct_sdtr(ahc, devinfo, period, offset); 2443 } 2444 } else { 2445 ahc_construct_wdtr(ahc, devinfo, tinfo->goal.width); 2446 } 2447 } 2448 2449 /* 2450 * Build a synchronous negotiation message in our message 2451 * buffer based on the input parameters. 2452 */ 2453 static void 2454 ahc_construct_sdtr(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 2455 u_int period, u_int offset) 2456 { 2457 if (offset == 0) 2458 period = AHC_ASYNC_XFER_PERIOD; 2459 ahc->msgout_buf[ahc->msgout_index++] = MSG_EXTENDED; 2460 ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_SDTR_LEN; 2461 ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_SDTR; 2462 ahc->msgout_buf[ahc->msgout_index++] = period; 2463 ahc->msgout_buf[ahc->msgout_index++] = offset; 2464 ahc->msgout_len += 5; 2465 if (bootverbose) { 2466 printf("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n", 2467 ahc_name(ahc), devinfo->channel, devinfo->target, 2468 devinfo->lun, period, offset); 2469 } 2470 } 2471 2472 /* 2473 * Build a wide negotiation message in our message 2474 * buffer based on the input parameters. 2475 */ 2476 static void 2477 ahc_construct_wdtr(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 2478 u_int bus_width) 2479 { 2480 ahc->msgout_buf[ahc->msgout_index++] = MSG_EXTENDED; 2481 ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_WDTR_LEN; 2482 ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_WDTR; 2483 ahc->msgout_buf[ahc->msgout_index++] = bus_width; 2484 ahc->msgout_len += 4; 2485 if (bootverbose) { 2486 printf("(%s:%c:%d:%d): Sending WDTR %x\n", 2487 ahc_name(ahc), devinfo->channel, devinfo->target, 2488 devinfo->lun, bus_width); 2489 } 2490 } 2491 2492 /* 2493 * Build a parallel protocol request message in our message 2494 * buffer based on the input parameters. 2495 */ 2496 static void 2497 ahc_construct_ppr(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 2498 u_int period, u_int offset, u_int bus_width, 2499 u_int ppr_options) 2500 { 2501 if (offset == 0) 2502 period = AHC_ASYNC_XFER_PERIOD; 2503 ahc->msgout_buf[ahc->msgout_index++] = MSG_EXTENDED; 2504 ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_PPR_LEN; 2505 ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_PPR; 2506 ahc->msgout_buf[ahc->msgout_index++] = period; 2507 ahc->msgout_buf[ahc->msgout_index++] = 0; 2508 ahc->msgout_buf[ahc->msgout_index++] = offset; 2509 ahc->msgout_buf[ahc->msgout_index++] = bus_width; 2510 ahc->msgout_buf[ahc->msgout_index++] = ppr_options; 2511 ahc->msgout_len += 8; 2512 if (bootverbose) { 2513 printf("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, " 2514 "offset %x, ppr_options %x\n", ahc_name(ahc), 2515 devinfo->channel, devinfo->target, devinfo->lun, 2516 bus_width, period, offset, ppr_options); 2517 } 2518 } 2519 2520 /* 2521 * Clear any active message state. 2522 */ 2523 static void 2524 ahc_clear_msg_state(struct ahc_softc *ahc) 2525 { 2526 ahc->msgout_len = 0; 2527 ahc->msgin_index = 0; 2528 ahc->msg_type = MSG_TYPE_NONE; 2529 if ((ahc_inb(ahc, SCSISIGI) & ATNI) != 0) { 2530 /* 2531 * The target didn't care to respond to our 2532 * message request, so clear ATN. 2533 */ 2534 ahc_outb(ahc, CLRSINT1, CLRATNO); 2535 } 2536 ahc_outb(ahc, MSG_OUT, MSG_NOOP); 2537 ahc_outb(ahc, SEQ_FLAGS2, 2538 ahc_inb(ahc, SEQ_FLAGS2) & ~TARGET_MSG_PENDING); 2539 } 2540 2541 static void 2542 ahc_handle_proto_violation(struct ahc_softc *ahc) 2543 { 2544 struct ahc_devinfo devinfo; 2545 struct scb *scb; 2546 u_int scbid; 2547 u_int seq_flags; 2548 u_int curphase; 2549 u_int lastphase; 2550 int found; 2551 2552 ahc_fetch_devinfo(ahc, &devinfo); 2553 scbid = ahc_inb(ahc, SCB_TAG); 2554 scb = ahc_lookup_scb(ahc, scbid); 2555 seq_flags = ahc_inb(ahc, SEQ_FLAGS); 2556 curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK; 2557 lastphase = ahc_inb(ahc, LASTPHASE); 2558 if ((seq_flags & NOT_IDENTIFIED) != 0) { 2559 2560 /* 2561 * The reconnecting target either did not send an 2562 * identify message, or did, but we didn't find an SCB 2563 * to match. 2564 */ 2565 ahc_print_devinfo(ahc, &devinfo); 2566 printf("Target did not send an IDENTIFY message. " 2567 "LASTPHASE = 0x%x.\n", lastphase); 2568 scb = NULL; 2569 } else if (scb == NULL) { 2570 /* 2571 * We don't seem to have an SCB active for this 2572 * transaction. Print an error and reset the bus. 2573 */ 2574 ahc_print_devinfo(ahc, &devinfo); 2575 printf("No SCB found during protocol violation\n"); 2576 goto proto_violation_reset; 2577 } else { 2578 ahc_set_transaction_status(scb, CAM_SEQUENCE_FAIL); 2579 if ((seq_flags & NO_CDB_SENT) != 0) { 2580 ahc_print_path(ahc, scb); 2581 printf("No or incomplete CDB sent to device.\n"); 2582 } else if ((ahc_inb(ahc, SCB_CONTROL) & STATUS_RCVD) == 0) { 2583 /* 2584 * The target never bothered to provide status to 2585 * us prior to completing the command. Since we don't 2586 * know the disposition of this command, we must attempt 2587 * to abort it. Assert ATN and prepare to send an abort 2588 * message. 2589 */ 2590 ahc_print_path(ahc, scb); 2591 printf("Completed command without status.\n"); 2592 } else { 2593 ahc_print_path(ahc, scb); 2594 printf("Unknown protocol violation.\n"); 2595 ahc_dump_card_state(ahc); 2596 } 2597 } 2598 if ((lastphase & ~P_DATAIN_DT) == 0 2599 || lastphase == P_COMMAND) { 2600 proto_violation_reset: 2601 /* 2602 * Target either went directly to data/command 2603 * phase or didn't respond to our ATN. 2604 * The only safe thing to do is to blow 2605 * it away with a bus reset. 2606 */ 2607 found = ahc_reset_channel(ahc, 'A', TRUE); 2608 printf("%s: Issued Channel %c Bus Reset. " 2609 "%d SCBs aborted\n", ahc_name(ahc), 'A', found); 2610 } else { 2611 /* 2612 * Leave the selection hardware off in case 2613 * this abort attempt will affect yet to 2614 * be sent commands. 2615 */ 2616 ahc_outb(ahc, SCSISEQ, 2617 ahc_inb(ahc, SCSISEQ) & ~ENSELO); 2618 ahc_assert_atn(ahc); 2619 ahc_outb(ahc, MSG_OUT, HOST_MSG); 2620 if (scb == NULL) { 2621 ahc_print_devinfo(ahc, &devinfo); 2622 ahc->msgout_buf[0] = MSG_ABORT_TASK; 2623 ahc->msgout_len = 1; 2624 ahc->msgout_index = 0; 2625 ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 2626 } else { 2627 ahc_print_path(ahc, scb); 2628 scb->flags |= SCB_ABORT; 2629 } 2630 printf("Protocol violation %s. Attempting to abort.\n", 2631 ahc_lookup_phase_entry(curphase)->phasemsg); 2632 } 2633 } 2634 2635 /* 2636 * Manual message loop handler. 2637 */ 2638 static void 2639 ahc_handle_message_phase(struct ahc_softc *ahc) 2640 { 2641 struct ahc_devinfo devinfo; 2642 u_int bus_phase; 2643 int end_session; 2644 2645 ahc_fetch_devinfo(ahc, &devinfo); 2646 end_session = FALSE; 2647 bus_phase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK; 2648 2649 reswitch: 2650 switch (ahc->msg_type) { 2651 case MSG_TYPE_INITIATOR_MSGOUT: 2652 { 2653 int lastbyte; 2654 int phasemis; 2655 int msgdone; 2656 2657 if (ahc->msgout_len == 0) 2658 panic("HOST_MSG_LOOP interrupt with no active message"); 2659 2660 #ifdef AHC_DEBUG 2661 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) { 2662 ahc_print_devinfo(ahc, &devinfo); 2663 printf("INITIATOR_MSG_OUT"); 2664 } 2665 #endif 2666 phasemis = bus_phase != P_MESGOUT; 2667 if (phasemis) { 2668 #ifdef AHC_DEBUG 2669 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) { 2670 printf(" PHASEMIS %s\n", 2671 ahc_lookup_phase_entry(bus_phase) 2672 ->phasemsg); 2673 } 2674 #endif 2675 if (bus_phase == P_MESGIN) { 2676 /* 2677 * Change gears and see if 2678 * this messages is of interest to 2679 * us or should be passed back to 2680 * the sequencer. 2681 */ 2682 ahc_outb(ahc, CLRSINT1, CLRATNO); 2683 ahc->send_msg_perror = FALSE; 2684 ahc->msg_type = MSG_TYPE_INITIATOR_MSGIN; 2685 ahc->msgin_index = 0; 2686 goto reswitch; 2687 } 2688 end_session = TRUE; 2689 break; 2690 } 2691 2692 if (ahc->send_msg_perror) { 2693 ahc_outb(ahc, CLRSINT1, CLRATNO); 2694 ahc_outb(ahc, CLRSINT1, CLRREQINIT); 2695 #ifdef AHC_DEBUG 2696 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) 2697 printf(" byte 0x%x\n", ahc->send_msg_perror); 2698 #endif 2699 ahc_outb(ahc, SCSIDATL, MSG_PARITY_ERROR); 2700 break; 2701 } 2702 2703 msgdone = ahc->msgout_index == ahc->msgout_len; 2704 if (msgdone) { 2705 /* 2706 * The target has requested a retry. 2707 * Re-assert ATN, reset our message index to 2708 * 0, and try again. 2709 */ 2710 ahc->msgout_index = 0; 2711 ahc_assert_atn(ahc); 2712 } 2713 2714 lastbyte = ahc->msgout_index == (ahc->msgout_len - 1); 2715 if (lastbyte) { 2716 /* Last byte is signified by dropping ATN */ 2717 ahc_outb(ahc, CLRSINT1, CLRATNO); 2718 } 2719 2720 /* 2721 * Clear our interrupt status and present 2722 * the next byte on the bus. 2723 */ 2724 ahc_outb(ahc, CLRSINT1, CLRREQINIT); 2725 #ifdef AHC_DEBUG 2726 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) 2727 printf(" byte 0x%x\n", 2728 ahc->msgout_buf[ahc->msgout_index]); 2729 #endif 2730 ahc_outb(ahc, SCSIDATL, ahc->msgout_buf[ahc->msgout_index++]); 2731 break; 2732 } 2733 case MSG_TYPE_INITIATOR_MSGIN: 2734 { 2735 int phasemis; 2736 int message_done; 2737 2738 #ifdef AHC_DEBUG 2739 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) { 2740 ahc_print_devinfo(ahc, &devinfo); 2741 printf("INITIATOR_MSG_IN"); 2742 } 2743 #endif 2744 phasemis = bus_phase != P_MESGIN; 2745 if (phasemis) { 2746 #ifdef AHC_DEBUG 2747 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) { 2748 printf(" PHASEMIS %s\n", 2749 ahc_lookup_phase_entry(bus_phase) 2750 ->phasemsg); 2751 } 2752 #endif 2753 ahc->msgin_index = 0; 2754 if (bus_phase == P_MESGOUT 2755 && (ahc->send_msg_perror == TRUE 2756 || (ahc->msgout_len != 0 2757 && ahc->msgout_index == 0))) { 2758 ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT; 2759 goto reswitch; 2760 } 2761 end_session = TRUE; 2762 break; 2763 } 2764 2765 /* Pull the byte in without acking it */ 2766 ahc->msgin_buf[ahc->msgin_index] = ahc_inb(ahc, SCSIBUSL); 2767 #ifdef AHC_DEBUG 2768 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) 2769 printf(" byte 0x%x\n", 2770 ahc->msgin_buf[ahc->msgin_index]); 2771 #endif 2772 2773 message_done = ahc_parse_msg(ahc, &devinfo); 2774 2775 if (message_done) { 2776 /* 2777 * Clear our incoming message buffer in case there 2778 * is another message following this one. 2779 */ 2780 ahc->msgin_index = 0; 2781 2782 /* 2783 * If this message illicited a response, 2784 * assert ATN so the target takes us to the 2785 * message out phase. 2786 */ 2787 if (ahc->msgout_len != 0) { 2788 #ifdef AHC_DEBUG 2789 if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) { 2790 ahc_print_devinfo(ahc, &devinfo); 2791 printf("Asserting ATN for response\n"); 2792 } 2793 #endif 2794 ahc_assert_atn(ahc); 2795 } 2796 } else 2797 ahc->msgin_index++; 2798 2799 if (message_done == MSGLOOP_TERMINATED) { 2800 end_session = TRUE; 2801 } else { 2802 /* Ack the byte */ 2803 ahc_outb(ahc, CLRSINT1, CLRREQINIT); 2804 (void)ahc_inb(ahc, SCSIDATL); 2805 } 2806 break; 2807 } 2808 case MSG_TYPE_TARGET_MSGIN: 2809 { 2810 int msgdone; 2811 int msgout_request; 2812 2813 if (ahc->msgout_len == 0) 2814 panic("Target MSGIN with no active message"); 2815 2816 /* 2817 * If we interrupted a mesgout session, the initiator 2818 * will not know this until our first REQ. So, we 2819 * only honor mesgout requests after we've sent our 2820 * first byte. 2821 */ 2822 if ((ahc_inb(ahc, SCSISIGI) & ATNI) != 0 2823 && ahc->msgout_index > 0) 2824 msgout_request = TRUE; 2825 else 2826 msgout_request = FALSE; 2827 2828 if (msgout_request) { 2829 2830 /* 2831 * Change gears and see if 2832 * this messages is of interest to 2833 * us or should be passed back to 2834 * the sequencer. 2835 */ 2836 ahc->msg_type = MSG_TYPE_TARGET_MSGOUT; 2837 ahc_outb(ahc, SCSISIGO, P_MESGOUT | BSYO); 2838 ahc->msgin_index = 0; 2839 /* Dummy read to REQ for first byte */ 2840 (void)ahc_inb(ahc, SCSIDATL); 2841 ahc_outb(ahc, SXFRCTL0, 2842 ahc_inb(ahc, SXFRCTL0) | SPIOEN); 2843 break; 2844 } 2845 2846 msgdone = ahc->msgout_index == ahc->msgout_len; 2847 if (msgdone) { 2848 ahc_outb(ahc, SXFRCTL0, 2849 ahc_inb(ahc, SXFRCTL0) & ~SPIOEN); 2850 end_session = TRUE; 2851 break; 2852 } 2853 2854 /* 2855 * Present the next byte on the bus. 2856 */ 2857 ahc_outb(ahc, SXFRCTL0, ahc_inb(ahc, SXFRCTL0) | SPIOEN); 2858 ahc_outb(ahc, SCSIDATL, ahc->msgout_buf[ahc->msgout_index++]); 2859 break; 2860 } 2861 case MSG_TYPE_TARGET_MSGOUT: 2862 { 2863 int lastbyte; 2864 int msgdone; 2865 2866 /* 2867 * The initiator signals that this is 2868 * the last byte by dropping ATN. 2869 */ 2870 lastbyte = (ahc_inb(ahc, SCSISIGI) & ATNI) == 0; 2871 2872 /* 2873 * Read the latched byte, but turn off SPIOEN first 2874 * so that we don't inadvertently cause a REQ for the 2875 * next byte. 2876 */ 2877 ahc_outb(ahc, SXFRCTL0, ahc_inb(ahc, SXFRCTL0) & ~SPIOEN); 2878 ahc->msgin_buf[ahc->msgin_index] = ahc_inb(ahc, SCSIDATL); 2879 msgdone = ahc_parse_msg(ahc, &devinfo); 2880 if (msgdone == MSGLOOP_TERMINATED) { 2881 /* 2882 * The message is *really* done in that it caused 2883 * us to go to bus free. The sequencer has already 2884 * been reset at this point, so pull the ejection 2885 * handle. 2886 */ 2887 return; 2888 } 2889 2890 ahc->msgin_index++; 2891 2892 /* 2893 * XXX Read spec about initiator dropping ATN too soon 2894 * and use msgdone to detect it. 2895 */ 2896 if (msgdone == MSGLOOP_MSGCOMPLETE) { 2897 ahc->msgin_index = 0; 2898 2899 /* 2900 * If this message illicited a response, transition 2901 * to the Message in phase and send it. 2902 */ 2903 if (ahc->msgout_len != 0) { 2904 ahc_outb(ahc, SCSISIGO, P_MESGIN | BSYO); 2905 ahc_outb(ahc, SXFRCTL0, 2906 ahc_inb(ahc, SXFRCTL0) | SPIOEN); 2907 ahc->msg_type = MSG_TYPE_TARGET_MSGIN; 2908 ahc->msgin_index = 0; 2909 break; 2910 } 2911 } 2912 2913 if (lastbyte) 2914 end_session = TRUE; 2915 else { 2916 /* Ask for the next byte. */ 2917 ahc_outb(ahc, SXFRCTL0, 2918 ahc_inb(ahc, SXFRCTL0) | SPIOEN); 2919 } 2920 2921 break; 2922 } 2923 default: 2924 panic("Unknown REQINIT message type"); 2925 } 2926 2927 if (end_session) { 2928 ahc_clear_msg_state(ahc); 2929 ahc_outb(ahc, RETURN_1, EXIT_MSG_LOOP); 2930 } else 2931 ahc_outb(ahc, RETURN_1, CONT_MSG_LOOP); 2932 } 2933 2934 /* 2935 * See if we sent a particular extended message to the target. 2936 * If "full" is true, return true only if the target saw the full 2937 * message. If "full" is false, return true if the target saw at 2938 * least the first byte of the message. 2939 */ 2940 static int 2941 ahc_sent_msg(struct ahc_softc *ahc, ahc_msgtype type, u_int msgval, int full) 2942 { 2943 int found; 2944 u_int index; 2945 2946 found = FALSE; 2947 index = 0; 2948 2949 while (index < ahc->msgout_len) { 2950 if (ahc->msgout_buf[index] == MSG_EXTENDED) { 2951 u_int end_index; 2952 2953 end_index = index + 1 + ahc->msgout_buf[index + 1]; 2954 if (ahc->msgout_buf[index+2] == msgval 2955 && type == AHCMSG_EXT) { 2956 2957 if (full) { 2958 if (ahc->msgout_index > end_index) 2959 found = TRUE; 2960 } else if (ahc->msgout_index > index) 2961 found = TRUE; 2962 } 2963 index = end_index; 2964 } else if (ahc->msgout_buf[index] >= MSG_SIMPLE_TASK 2965 && ahc->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) { 2966 2967 /* Skip tag type and tag id or residue param*/ 2968 index += 2; 2969 } else { 2970 /* Single byte message */ 2971 if (type == AHCMSG_1B 2972 && ahc->msgout_buf[index] == msgval 2973 && ahc->msgout_index > index) 2974 found = TRUE; 2975 index++; 2976 } 2977 2978 if (found) 2979 break; 2980 } 2981 return (found); 2982 } 2983 2984 /* 2985 * Wait for a complete incoming message, parse it, and respond accordingly. 2986 */ 2987 static int 2988 ahc_parse_msg(struct ahc_softc *ahc, struct ahc_devinfo *devinfo) 2989 { 2990 struct ahc_initiator_tinfo *tinfo; 2991 struct ahc_tmode_tstate *tstate; 2992 int reject; 2993 int done; 2994 int response; 2995 u_int targ_scsirate; 2996 2997 done = MSGLOOP_IN_PROG; 2998 response = FALSE; 2999 reject = FALSE; 3000 tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid, 3001 devinfo->target, &tstate); 3002 targ_scsirate = tinfo->scsirate; 3003 3004 /* 3005 * Parse as much of the message as is available, 3006 * rejecting it if we don't support it. When 3007 * the entire message is available and has been 3008 * handled, return MSGLOOP_MSGCOMPLETE, indicating 3009 * that we have parsed an entire message. 3010 * 3011 * In the case of extended messages, we accept the length 3012 * byte outright and perform more checking once we know the 3013 * extended message type. 3014 */ 3015 switch (ahc->msgin_buf[0]) { 3016 case MSG_DISCONNECT: 3017 case MSG_SAVEDATAPOINTER: 3018 case MSG_CMDCOMPLETE: 3019 case MSG_RESTOREPOINTERS: 3020 case MSG_IGN_WIDE_RESIDUE: 3021 /* 3022 * End our message loop as these are messages 3023 * the sequencer handles on its own. 3024 */ 3025 done = MSGLOOP_TERMINATED; 3026 break; 3027 case MSG_MESSAGE_REJECT: 3028 response = ahc_handle_msg_reject(ahc, devinfo); 3029 /* FALLTHROUGH */ 3030 case MSG_NOOP: 3031 done = MSGLOOP_MSGCOMPLETE; 3032 break; 3033 case MSG_EXTENDED: 3034 { 3035 /* Wait for enough of the message to begin validation */ 3036 if (ahc->msgin_index < 2) 3037 break; 3038 switch (ahc->msgin_buf[2]) { 3039 case MSG_EXT_SDTR: 3040 { 3041 struct ahc_syncrate *syncrate; 3042 u_int period; 3043 u_int ppr_options; 3044 u_int offset; 3045 u_int saved_offset; 3046 3047 if (ahc->msgin_buf[1] != MSG_EXT_SDTR_LEN) { 3048 reject = TRUE; 3049 break; 3050 } 3051 3052 /* 3053 * Wait until we have both args before validating 3054 * and acting on this message. 3055 * 3056 * Add one to MSG_EXT_SDTR_LEN to account for 3057 * the extended message preamble. 3058 */ 3059 if (ahc->msgin_index < (MSG_EXT_SDTR_LEN + 1)) 3060 break; 3061 3062 period = ahc->msgin_buf[3]; 3063 ppr_options = 0; 3064 saved_offset = offset = ahc->msgin_buf[4]; 3065 syncrate = ahc_devlimited_syncrate(ahc, tinfo, &period, 3066 &ppr_options, 3067 devinfo->role); 3068 ahc_validate_offset(ahc, tinfo, syncrate, &offset, 3069 targ_scsirate & WIDEXFER, 3070 devinfo->role); 3071 if (bootverbose) { 3072 printf("(%s:%c:%d:%d): Received " 3073 "SDTR period %x, offset %x\n\t" 3074 "Filtered to period %x, offset %x\n", 3075 ahc_name(ahc), devinfo->channel, 3076 devinfo->target, devinfo->lun, 3077 ahc->msgin_buf[3], saved_offset, 3078 period, offset); 3079 } 3080 ahc_set_syncrate(ahc, devinfo, 3081 syncrate, period, 3082 offset, ppr_options, 3083 AHC_TRANS_ACTIVE|AHC_TRANS_GOAL, 3084 /*paused*/TRUE); 3085 3086 /* 3087 * See if we initiated Sync Negotiation 3088 * and didn't have to fall down to async 3089 * transfers. 3090 */ 3091 if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_SDTR, TRUE)) { 3092 /* We started it */ 3093 if (saved_offset != offset) { 3094 /* Went too low - force async */ 3095 reject = TRUE; 3096 } 3097 } else { 3098 /* 3099 * Send our own SDTR in reply 3100 */ 3101 if (bootverbose 3102 && devinfo->role == ROLE_INITIATOR) { 3103 printf("(%s:%c:%d:%d): Target " 3104 "Initiated SDTR\n", 3105 ahc_name(ahc), devinfo->channel, 3106 devinfo->target, devinfo->lun); 3107 } 3108 ahc->msgout_index = 0; 3109 ahc->msgout_len = 0; 3110 ahc_construct_sdtr(ahc, devinfo, 3111 period, offset); 3112 ahc->msgout_index = 0; 3113 response = TRUE; 3114 } 3115 done = MSGLOOP_MSGCOMPLETE; 3116 break; 3117 } 3118 case MSG_EXT_WDTR: 3119 { 3120 u_int bus_width; 3121 u_int saved_width; 3122 u_int sending_reply; 3123 3124 sending_reply = FALSE; 3125 if (ahc->msgin_buf[1] != MSG_EXT_WDTR_LEN) { 3126 reject = TRUE; 3127 break; 3128 } 3129 3130 /* 3131 * Wait until we have our arg before validating 3132 * and acting on this message. 3133 * 3134 * Add one to MSG_EXT_WDTR_LEN to account for 3135 * the extended message preamble. 3136 */ 3137 if (ahc->msgin_index < (MSG_EXT_WDTR_LEN + 1)) 3138 break; 3139 3140 bus_width = ahc->msgin_buf[3]; 3141 saved_width = bus_width; 3142 ahc_validate_width(ahc, tinfo, &bus_width, 3143 devinfo->role); 3144 if (bootverbose) { 3145 printf("(%s:%c:%d:%d): Received WDTR " 3146 "%x filtered to %x\n", 3147 ahc_name(ahc), devinfo->channel, 3148 devinfo->target, devinfo->lun, 3149 saved_width, bus_width); 3150 } 3151 3152 if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_WDTR, TRUE)) { 3153 /* 3154 * Don't send a WDTR back to the 3155 * target, since we asked first. 3156 * If the width went higher than our 3157 * request, reject it. 3158 */ 3159 if (saved_width > bus_width) { 3160 reject = TRUE; 3161 printf("(%s:%c:%d:%d): requested %dBit " 3162 "transfers. Rejecting...\n", 3163 ahc_name(ahc), devinfo->channel, 3164 devinfo->target, devinfo->lun, 3165 8 * (0x01 << bus_width)); 3166 bus_width = 0; 3167 } 3168 } else { 3169 /* 3170 * Send our own WDTR in reply 3171 */ 3172 if (bootverbose 3173 && devinfo->role == ROLE_INITIATOR) { 3174 printf("(%s:%c:%d:%d): Target " 3175 "Initiated WDTR\n", 3176 ahc_name(ahc), devinfo->channel, 3177 devinfo->target, devinfo->lun); 3178 } 3179 ahc->msgout_index = 0; 3180 ahc->msgout_len = 0; 3181 ahc_construct_wdtr(ahc, devinfo, bus_width); 3182 ahc->msgout_index = 0; 3183 response = TRUE; 3184 sending_reply = TRUE; 3185 } 3186 ahc_set_width(ahc, devinfo, bus_width, 3187 AHC_TRANS_ACTIVE|AHC_TRANS_GOAL, 3188 /*paused*/TRUE); 3189 /* After a wide message, we are async */ 3190 ahc_set_syncrate(ahc, devinfo, 3191 /*syncrate*/NULL, /*period*/0, 3192 /*offset*/0, /*ppr_options*/0, 3193 AHC_TRANS_ACTIVE, /*paused*/TRUE); 3194 if (sending_reply == FALSE && reject == FALSE) { 3195 3196 if (tinfo->goal.offset) { 3197 ahc->msgout_index = 0; 3198 ahc->msgout_len = 0; 3199 ahc_build_transfer_msg(ahc, devinfo); 3200 ahc->msgout_index = 0; 3201 response = TRUE; 3202 } 3203 } 3204 done = MSGLOOP_MSGCOMPLETE; 3205 break; 3206 } 3207 case MSG_EXT_PPR: 3208 { 3209 struct ahc_syncrate *syncrate; 3210 u_int period; 3211 u_int offset; 3212 u_int bus_width; 3213 u_int ppr_options; 3214 u_int saved_width; 3215 u_int saved_offset; 3216 u_int saved_ppr_options; 3217 3218 if (ahc->msgin_buf[1] != MSG_EXT_PPR_LEN) { 3219 reject = TRUE; 3220 break; 3221 } 3222 3223 /* 3224 * Wait until we have all args before validating 3225 * and acting on this message. 3226 * 3227 * Add one to MSG_EXT_PPR_LEN to account for 3228 * the extended message preamble. 3229 */ 3230 if (ahc->msgin_index < (MSG_EXT_PPR_LEN + 1)) 3231 break; 3232 3233 period = ahc->msgin_buf[3]; 3234 offset = ahc->msgin_buf[5]; 3235 bus_width = ahc->msgin_buf[6]; 3236 saved_width = bus_width; 3237 ppr_options = ahc->msgin_buf[7]; 3238 /* 3239 * According to the spec, a DT only 3240 * period factor with no DT option 3241 * set implies async. 3242 */ 3243 if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0 3244 && period == 9) 3245 offset = 0; 3246 saved_ppr_options = ppr_options; 3247 saved_offset = offset; 3248 3249 /* 3250 * Mask out any options we don't support 3251 * on any controller. Transfer options are 3252 * only available if we are negotiating wide. 3253 */ 3254 ppr_options &= MSG_EXT_PPR_DT_REQ; 3255 if (bus_width == 0) 3256 ppr_options = 0; 3257 3258 ahc_validate_width(ahc, tinfo, &bus_width, 3259 devinfo->role); 3260 syncrate = ahc_devlimited_syncrate(ahc, tinfo, &period, 3261 &ppr_options, 3262 devinfo->role); 3263 ahc_validate_offset(ahc, tinfo, syncrate, 3264 &offset, bus_width, 3265 devinfo->role); 3266 3267 if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_PPR, TRUE)) { 3268 /* 3269 * If we are unable to do any of the 3270 * requested options (we went too low), 3271 * then we'll have to reject the message. 3272 */ 3273 if (saved_width > bus_width 3274 || saved_offset != offset 3275 || saved_ppr_options != ppr_options) { 3276 reject = TRUE; 3277 period = 0; 3278 offset = 0; 3279 bus_width = 0; 3280 ppr_options = 0; 3281 syncrate = NULL; 3282 } 3283 } else { 3284 if (devinfo->role != ROLE_TARGET) 3285 printf("(%s:%c:%d:%d): Target " 3286 "Initiated PPR\n", 3287 ahc_name(ahc), devinfo->channel, 3288 devinfo->target, devinfo->lun); 3289 else 3290 printf("(%s:%c:%d:%d): Initiator " 3291 "Initiated PPR\n", 3292 ahc_name(ahc), devinfo->channel, 3293 devinfo->target, devinfo->lun); 3294 ahc->msgout_index = 0; 3295 ahc->msgout_len = 0; 3296 ahc_construct_ppr(ahc, devinfo, period, offset, 3297 bus_width, ppr_options); 3298 ahc->msgout_index = 0; 3299 response = TRUE; 3300 } 3301 if (bootverbose) { 3302 printf("(%s:%c:%d:%d): Received PPR width %x, " 3303 "period %x, offset %x,options %x\n" 3304 "\tFiltered to width %x, period %x, " 3305 "offset %x, options %x\n", 3306 ahc_name(ahc), devinfo->channel, 3307 devinfo->target, devinfo->lun, 3308 saved_width, ahc->msgin_buf[3], 3309 saved_offset, saved_ppr_options, 3310 bus_width, period, offset, ppr_options); 3311 } 3312 ahc_set_width(ahc, devinfo, bus_width, 3313 AHC_TRANS_ACTIVE|AHC_TRANS_GOAL, 3314 /*paused*/TRUE); 3315 ahc_set_syncrate(ahc, devinfo, 3316 syncrate, period, 3317 offset, ppr_options, 3318 AHC_TRANS_ACTIVE|AHC_TRANS_GOAL, 3319 /*paused*/TRUE); 3320 done = MSGLOOP_MSGCOMPLETE; 3321 break; 3322 } 3323 default: 3324 /* Unknown extended message. Reject it. */ 3325 reject = TRUE; 3326 break; 3327 } 3328 break; 3329 } 3330 #ifdef AHC_TARGET_MODE 3331 case MSG_BUS_DEV_RESET: 3332 ahc_handle_devreset(ahc, devinfo, 3333 CAM_BDR_SENT, 3334 "Bus Device Reset Received", 3335 /*verbose_level*/0); 3336 ahc_restart(ahc); 3337 done = MSGLOOP_TERMINATED; 3338 break; 3339 case MSG_ABORT_TAG: 3340 case MSG_ABORT: 3341 case MSG_CLEAR_QUEUE: 3342 { 3343 int tag; 3344 3345 /* Target mode messages */ 3346 if (devinfo->role != ROLE_TARGET) { 3347 reject = TRUE; 3348 break; 3349 } 3350 tag = SCB_LIST_NULL; 3351 if (ahc->msgin_buf[0] == MSG_ABORT_TAG) 3352 tag = ahc_inb(ahc, INITIATOR_TAG); 3353 ahc_abort_scbs(ahc, devinfo->target, devinfo->channel, 3354 devinfo->lun, tag, ROLE_TARGET, 3355 CAM_REQ_ABORTED); 3356 3357 tstate = ahc->enabled_targets[devinfo->our_scsiid]; 3358 if (tstate != NULL) { 3359 struct ahc_tmode_lstate* lstate; 3360 3361 lstate = tstate->enabled_luns[devinfo->lun]; 3362 if (lstate != NULL) { 3363 ahc_queue_lstate_event(ahc, lstate, 3364 devinfo->our_scsiid, 3365 ahc->msgin_buf[0], 3366 /*arg*/tag); 3367 ahc_send_lstate_events(ahc, lstate); 3368 } 3369 } 3370 ahc_restart(ahc); 3371 done = MSGLOOP_TERMINATED; 3372 break; 3373 } 3374 #endif 3375 case MSG_TERM_IO_PROC: 3376 default: 3377 reject = TRUE; 3378 break; 3379 } 3380 3381 if (reject) { 3382 /* 3383 * Setup to reject the message. 3384 */ 3385 ahc->msgout_index = 0; 3386 ahc->msgout_len = 1; 3387 ahc->msgout_buf[0] = MSG_MESSAGE_REJECT; 3388 done = MSGLOOP_MSGCOMPLETE; 3389 response = TRUE; 3390 } 3391 3392 if (done != MSGLOOP_IN_PROG && !response) 3393 /* Clear the outgoing message buffer */ 3394 ahc->msgout_len = 0; 3395 3396 return (done); 3397 } 3398 3399 /* 3400 * Process a message reject message. 3401 */ 3402 static int 3403 ahc_handle_msg_reject(struct ahc_softc *ahc, struct ahc_devinfo *devinfo) 3404 { 3405 /* 3406 * What we care about here is if we had an 3407 * outstanding SDTR or WDTR message for this 3408 * target. If we did, this is a signal that 3409 * the target is refusing negotiation. 3410 */ 3411 struct scb *scb; 3412 struct ahc_initiator_tinfo *tinfo; 3413 struct ahc_tmode_tstate *tstate; 3414 u_int scb_index; 3415 u_int last_msg; 3416 int response = 0; 3417 3418 scb_index = ahc_inb(ahc, SCB_TAG); 3419 scb = ahc_lookup_scb(ahc, scb_index); 3420 tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, 3421 devinfo->our_scsiid, 3422 devinfo->target, &tstate); 3423 /* Might be necessary */ 3424 last_msg = ahc_inb(ahc, LAST_MSG); 3425 3426 if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_PPR, /*full*/FALSE)) { 3427 /* 3428 * Target does not support the PPR message. 3429 * Attempt to negotiate SPI-2 style. 3430 */ 3431 if (bootverbose) { 3432 printf("(%s:%c:%d:%d): PPR Rejected. " 3433 "Trying WDTR/SDTR\n", 3434 ahc_name(ahc), devinfo->channel, 3435 devinfo->target, devinfo->lun); 3436 } 3437 tinfo->goal.ppr_options = 0; 3438 tinfo->curr.transport_version = 2; 3439 tinfo->goal.transport_version = 2; 3440 ahc->msgout_index = 0; 3441 ahc->msgout_len = 0; 3442 ahc_build_transfer_msg(ahc, devinfo); 3443 ahc->msgout_index = 0; 3444 response = 1; 3445 } else if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_WDTR, /*full*/FALSE)) { 3446 3447 /* note 8bit xfers */ 3448 if (bootverbose) 3449 printf("(%s:%c:%d:%d): refuses WIDE negotiation. Using " 3450 "8bit transfers\n", ahc_name(ahc), 3451 devinfo->channel, devinfo->target, devinfo->lun); 3452 ahc_set_width(ahc, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 3453 AHC_TRANS_ACTIVE|AHC_TRANS_GOAL, 3454 /*paused*/TRUE); 3455 /* 3456 * No need to clear the sync rate. If the target 3457 * did not accept the command, our syncrate is 3458 * unaffected. If the target started the negotiation, 3459 * but rejected our response, we already cleared the 3460 * sync rate before sending our WDTR. 3461 */ 3462 if (tinfo->goal.offset != tinfo->curr.offset) { 3463 3464 /* Start the sync negotiation */ 3465 ahc->msgout_index = 0; 3466 ahc->msgout_len = 0; 3467 ahc_build_transfer_msg(ahc, devinfo); 3468 ahc->msgout_index = 0; 3469 response = 1; 3470 } 3471 } else if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_SDTR, /*full*/FALSE)) { 3472 /* note asynch xfers and clear flag */ 3473 ahc_set_syncrate(ahc, devinfo, /*syncrate*/NULL, /*period*/0, 3474 /*offset*/0, /*ppr_options*/0, 3475 AHC_TRANS_ACTIVE|AHC_TRANS_GOAL, 3476 /*paused*/TRUE); 3477 if (bootverbose) 3478 printf("(%s:%c:%d:%d): refuses synchronous negotiation." 3479 " Using asynchronous transfers\n", 3480 ahc_name(ahc), devinfo->channel, 3481 devinfo->target, devinfo->lun); 3482 } else if ((scb->hscb->control & MSG_SIMPLE_TASK) != 0) { 3483 int tag_type; 3484 int mask; 3485 3486 tag_type = (scb->hscb->control & MSG_SIMPLE_TASK); 3487 3488 if (tag_type == MSG_SIMPLE_TASK) { 3489 if (bootverbose) 3490 printf("(%s:%c:%d:%d): refuses tagged commands." 3491 " Performing non-tagged I/O\n", 3492 ahc_name(ahc), devinfo->channel, 3493 devinfo->target, devinfo->lun); 3494 ahc_set_tags(ahc, devinfo, AHC_QUEUE_NONE); 3495 mask = ~0x23; 3496 } else { 3497 if (bootverbose) 3498 printf("(%s:%c:%d:%d): refuses %s tagged " 3499 "commands. Performing simple queue " 3500 "tagged I/O only\n", 3501 ahc_name(ahc), devinfo->channel, 3502 devinfo->target, devinfo->lun, 3503 tag_type == MSG_ORDERED_TASK 3504 ? "ordered" : "head of queue"); 3505 ahc_set_tags(ahc, devinfo, AHC_QUEUE_BASIC); 3506 mask = ~0x03; 3507 } 3508 3509 /* 3510 * Resend the identify for this CCB as the target 3511 * may believe that the selection is invalid otherwise. 3512 */ 3513 ahc_outb(ahc, SCB_CONTROL, 3514 ahc_inb(ahc, SCB_CONTROL) & mask); 3515 scb->hscb->control &= mask; 3516 ahc_set_transaction_tag(scb, /*enabled*/FALSE, 3517 /*type*/MSG_SIMPLE_TASK); 3518 ahc_outb(ahc, MSG_OUT, MSG_IDENTIFYFLAG); 3519 ahc_assert_atn(ahc); 3520 3521 /* 3522 * This transaction is now at the head of 3523 * the untagged queue for this target. 3524 */ 3525 if ((ahc->flags & AHC_SCB_BTT) == 0) { 3526 struct scb_tailq *untagged_q; 3527 3528 untagged_q = 3529 &(ahc->untagged_queues[devinfo->target_offset]); 3530 TAILQ_INSERT_HEAD(untagged_q, scb, links.tqe); 3531 scb->flags |= SCB_UNTAGGEDQ; 3532 } 3533 ahc_busy_tcl(ahc, BUILD_TCL(scb->hscb->scsiid, devinfo->lun), 3534 scb->hscb->tag); 3535 3536 /* 3537 * Requeue all tagged commands for this target 3538 * currently in our possession so they can be 3539 * converted to untagged commands. 3540 */ 3541 ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb), 3542 SCB_GET_CHANNEL(ahc, scb), 3543 SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL, 3544 ROLE_INITIATOR, CAM_REQUEUE_REQ, 3545 SEARCH_COMPLETE); 3546 } else { 3547 /* 3548 * Otherwise, we ignore it. 3549 */ 3550 if (bootverbose) 3551 printf("%s:%c:%d: Message reject for %x -- ignored\n", 3552 ahc_name(ahc), devinfo->channel, devinfo->target, 3553 last_msg); 3554 } 3555 return (response); 3556 } 3557 3558 /* 3559 * Process an ignore wide residue message. 3560 */ 3561 static void 3562 ahc_handle_ign_wide_residue(struct ahc_softc *ahc, 3563 struct ahc_devinfo *devinfo) 3564 { 3565 u_int scb_index; 3566 struct scb *scb; 3567 3568 scb_index = ahc_inb(ahc, SCB_TAG); 3569 scb = ahc_lookup_scb(ahc, scb_index); 3570 /* 3571 * XXX Actually check data direction in the sequencer? 3572 * Perhaps add datadir to some spare bits in the hscb? 3573 */ 3574 if ((ahc_inb(ahc, SEQ_FLAGS) & DPHASE) == 0 3575 || ahc_get_transfer_dir(scb) != CAM_DIR_IN) { 3576 /* 3577 * Ignore the message if we haven't 3578 * seen an appropriate data phase yet. 3579 */ 3580 } else { 3581 /* 3582 * If the residual occurred on the last 3583 * transfer and the transfer request was 3584 * expected to end on an odd count, do 3585 * nothing. Otherwise, subtract a byte 3586 * and update the residual count accordingly. 3587 */ 3588 uint32_t sgptr; 3589 3590 sgptr = ahc_inb(ahc, SCB_RESIDUAL_SGPTR); 3591 if ((sgptr & SG_LIST_NULL) != 0 3592 && ahc_inb(ahc, DATA_COUNT_ODD) == 1) { 3593 /* 3594 * If the residual occurred on the last 3595 * transfer and the transfer request was 3596 * expected to end on an odd count, do 3597 * nothing. 3598 */ 3599 } else { 3600 struct ahc_dma_seg *sg; 3601 uint32_t data_cnt; 3602 uint32_t data_addr; 3603 uint32_t sglen; 3604 3605 /* Pull in the rest of the sgptr */ 3606 sgptr |= (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 3) << 24) 3607 | (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 2) << 16) 3608 | (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 1) << 8); 3609 sgptr &= SG_PTR_MASK; 3610 data_cnt = (ahc_inb(ahc, SCB_RESIDUAL_DATACNT+3) << 24) 3611 | (ahc_inb(ahc, SCB_RESIDUAL_DATACNT+2) << 16) 3612 | (ahc_inb(ahc, SCB_RESIDUAL_DATACNT+1) << 8) 3613 | (ahc_inb(ahc, SCB_RESIDUAL_DATACNT)); 3614 3615 data_addr = (ahc_inb(ahc, SHADDR + 3) << 24) 3616 | (ahc_inb(ahc, SHADDR + 2) << 16) 3617 | (ahc_inb(ahc, SHADDR + 1) << 8) 3618 | (ahc_inb(ahc, SHADDR)); 3619 3620 data_cnt += 1; 3621 data_addr -= 1; 3622 3623 sg = ahc_sg_bus_to_virt(scb, sgptr); 3624 /* 3625 * The residual sg ptr points to the next S/G 3626 * to load so we must go back one. 3627 */ 3628 sg--; 3629 sglen = ahc_le32toh(sg->len) & AHC_SG_LEN_MASK; 3630 if (sg != scb->sg_list 3631 && sglen < (data_cnt & AHC_SG_LEN_MASK)) { 3632 3633 sg--; 3634 sglen = ahc_le32toh(sg->len); 3635 /* 3636 * Preserve High Address and SG_LIST bits 3637 * while setting the count to 1. 3638 */ 3639 data_cnt = 1 | (sglen & (~AHC_SG_LEN_MASK)); 3640 data_addr = ahc_le32toh(sg->addr) 3641 + (sglen & AHC_SG_LEN_MASK) - 1; 3642 3643 /* 3644 * Increment sg so it points to the 3645 * "next" sg. 3646 */ 3647 sg++; 3648 sgptr = ahc_sg_virt_to_bus(scb, sg); 3649 ahc_outb(ahc, SCB_RESIDUAL_SGPTR + 3, 3650 sgptr >> 24); 3651 ahc_outb(ahc, SCB_RESIDUAL_SGPTR + 2, 3652 sgptr >> 16); 3653 ahc_outb(ahc, SCB_RESIDUAL_SGPTR + 1, 3654 sgptr >> 8); 3655 ahc_outb(ahc, SCB_RESIDUAL_SGPTR, sgptr); 3656 } 3657 3658 ahc_outb(ahc, SCB_RESIDUAL_DATACNT + 3, data_cnt >> 24); 3659 ahc_outb(ahc, SCB_RESIDUAL_DATACNT + 2, data_cnt >> 16); 3660 ahc_outb(ahc, SCB_RESIDUAL_DATACNT + 1, data_cnt >> 8); 3661 ahc_outb(ahc, SCB_RESIDUAL_DATACNT, data_cnt); 3662 } 3663 } 3664 } 3665 3666 3667 /* 3668 * Reinitialize the data pointers for the active transfer 3669 * based on its current residual. 3670 */ 3671 static void 3672 ahc_reinitialize_dataptrs(struct ahc_softc *ahc) 3673 { 3674 struct scb *scb; 3675 struct ahc_dma_seg *sg; 3676 u_int scb_index; 3677 uint32_t sgptr; 3678 uint32_t resid; 3679 uint32_t dataptr; 3680 3681 scb_index = ahc_inb(ahc, SCB_TAG); 3682 scb = ahc_lookup_scb(ahc, scb_index); 3683 sgptr = (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 3) << 24) 3684 | (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 2) << 16) 3685 | (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 1) << 8) 3686 | ahc_inb(ahc, SCB_RESIDUAL_SGPTR); 3687 3688 sgptr &= SG_PTR_MASK; 3689 sg = ahc_sg_bus_to_virt(scb, sgptr); 3690 3691 /* The residual sg_ptr always points to the next sg */ 3692 sg--; 3693 3694 resid = (ahc_inb(ahc, SCB_RESIDUAL_DATACNT + 2) << 16) 3695 | (ahc_inb(ahc, SCB_RESIDUAL_DATACNT + 1) << 8) 3696 | ahc_inb(ahc, SCB_RESIDUAL_DATACNT); 3697 3698 dataptr = ahc_le32toh(sg->addr) 3699 + (ahc_le32toh(sg->len) & AHC_SG_LEN_MASK) 3700 - resid; 3701 if ((ahc->flags & AHC_39BIT_ADDRESSING) != 0) { 3702 u_int dscommand1; 3703 3704 dscommand1 = ahc_inb(ahc, DSCOMMAND1); 3705 ahc_outb(ahc, DSCOMMAND1, dscommand1 | HADDLDSEL0); 3706 ahc_outb(ahc, HADDR, 3707 (ahc_le32toh(sg->len) >> 24) & SG_HIGH_ADDR_BITS); 3708 ahc_outb(ahc, DSCOMMAND1, dscommand1); 3709 } 3710 ahc_outb(ahc, HADDR + 3, dataptr >> 24); 3711 ahc_outb(ahc, HADDR + 2, dataptr >> 16); 3712 ahc_outb(ahc, HADDR + 1, dataptr >> 8); 3713 ahc_outb(ahc, HADDR, dataptr); 3714 ahc_outb(ahc, HCNT + 2, resid >> 16); 3715 ahc_outb(ahc, HCNT + 1, resid >> 8); 3716 ahc_outb(ahc, HCNT, resid); 3717 if ((ahc->features & AHC_ULTRA2) == 0) { 3718 ahc_outb(ahc, STCNT + 2, resid >> 16); 3719 ahc_outb(ahc, STCNT + 1, resid >> 8); 3720 ahc_outb(ahc, STCNT, resid); 3721 } 3722 } 3723 3724 /* 3725 * Handle the effects of issuing a bus device reset message. 3726 */ 3727 static void 3728 ahc_handle_devreset(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 3729 cam_status status, const char *message, int verbose_level) 3730 { 3731 #ifdef AHC_TARGET_MODE 3732 struct ahc_tmode_tstate* tstate; 3733 u_int lun; 3734 #endif 3735 int found; 3736 3737 found = ahc_abort_scbs(ahc, devinfo->target, devinfo->channel, 3738 CAM_LUN_WILDCARD, SCB_LIST_NULL, devinfo->role, 3739 status); 3740 3741 #ifdef AHC_TARGET_MODE 3742 /* 3743 * Send an immediate notify ccb to all target mord peripheral 3744 * drivers affected by this action. 3745 */ 3746 tstate = ahc->enabled_targets[devinfo->our_scsiid]; 3747 if (tstate != NULL) { 3748 for (lun = 0; lun < AHC_NUM_LUNS; lun++) { 3749 struct ahc_tmode_lstate* lstate; 3750 3751 lstate = tstate->enabled_luns[lun]; 3752 if (lstate == NULL) 3753 continue; 3754 3755 ahc_queue_lstate_event(ahc, lstate, devinfo->our_scsiid, 3756 MSG_BUS_DEV_RESET, /*arg*/0); 3757 ahc_send_lstate_events(ahc, lstate); 3758 } 3759 } 3760 #endif 3761 3762 /* 3763 * Go back to async/narrow transfers and renegotiate. 3764 */ 3765 ahc_set_width(ahc, devinfo, MSG_EXT_WDTR_BUS_8_BIT, 3766 AHC_TRANS_CUR, /*paused*/TRUE); 3767 ahc_set_syncrate(ahc, devinfo, /*syncrate*/NULL, 3768 /*period*/0, /*offset*/0, /*ppr_options*/0, 3769 AHC_TRANS_CUR, /*paused*/TRUE); 3770 3771 ahc_send_async(ahc, devinfo->channel, devinfo->target, 3772 CAM_LUN_WILDCARD, AC_SENT_BDR, NULL); 3773 3774 if (message != NULL 3775 && (verbose_level <= bootverbose)) 3776 printf("%s: %s on %c:%d. %d SCBs aborted\n", ahc_name(ahc), 3777 message, devinfo->channel, devinfo->target, found); 3778 } 3779 3780 #ifdef AHC_TARGET_MODE 3781 static void 3782 ahc_setup_target_msgin(struct ahc_softc *ahc, struct ahc_devinfo *devinfo, 3783 struct scb *scb) 3784 { 3785 3786 /* 3787 * To facilitate adding multiple messages together, 3788 * each routine should increment the index and len 3789 * variables instead of setting them explicitly. 3790 */ 3791 ahc->msgout_index = 0; 3792 ahc->msgout_len = 0; 3793 3794 if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0) 3795 ahc_build_transfer_msg(ahc, devinfo); 3796 else 3797 panic("ahc_intr: AWAITING target message with no message"); 3798 3799 ahc->msgout_index = 0; 3800 ahc->msg_type = MSG_TYPE_TARGET_MSGIN; 3801 } 3802 #endif 3803 3804 int 3805 ahc_softc_init(struct ahc_softc *ahc) 3806 { 3807 3808 /* The IRQMS bit is only valid on VL and EISA chips */ 3809 if ((ahc->chip & AHC_PCI) == 0) 3810 ahc->unpause = ahc_inb(ahc, HCNTRL) & IRQMS; 3811 else 3812 ahc->unpause = 0; 3813 ahc->pause = ahc->unpause | PAUSE; 3814 /* XXX The shared scb data stuff should be deprecated */ 3815 if (ahc->scb_data == NULL) { 3816 ahc->scb_data = malloc(sizeof(*ahc->scb_data), 3817 M_DEVBUF, M_WAITOK | M_ZERO); 3818 } 3819 3820 return (0); 3821 } 3822 3823 void 3824 ahc_softc_insert(struct ahc_softc *ahc) 3825 { 3826 struct ahc_softc *list_ahc; 3827 3828 #if AHC_PCI_CONFIG > 0 3829 /* 3830 * Second Function PCI devices need to inherit some 3831 * settings from function 0. 3832 */ 3833 if ((ahc->chip & AHC_BUS_MASK) == AHC_PCI 3834 && (ahc->features & AHC_MULTI_FUNC) != 0) { 3835 TAILQ_FOREACH(list_ahc, &ahc_tailq, links) { 3836 ahc_dev_softc_t list_pci; 3837 ahc_dev_softc_t pci; 3838 3839 list_pci = list_ahc->dev_softc; 3840 pci = ahc->dev_softc; 3841 if (ahc_get_pci_slot(list_pci) == ahc_get_pci_slot(pci) 3842 && ahc_get_pci_bus(list_pci) == ahc_get_pci_bus(pci)) { 3843 struct ahc_softc *master; 3844 struct ahc_softc *slave; 3845 3846 if (ahc_get_pci_function(list_pci) == 0) { 3847 master = list_ahc; 3848 slave = ahc; 3849 } else { 3850 master = ahc; 3851 slave = list_ahc; 3852 } 3853 slave->flags &= ~AHC_BIOS_ENABLED; 3854 slave->flags |= 3855 master->flags & AHC_BIOS_ENABLED; 3856 slave->flags &= ~AHC_PRIMARY_CHANNEL; 3857 slave->flags |= 3858 master->flags & AHC_PRIMARY_CHANNEL; 3859 break; 3860 } 3861 } 3862 } 3863 #endif 3864 3865 /* 3866 * Insertion sort into our list of softcs. 3867 */ 3868 list_ahc = TAILQ_FIRST(&ahc_tailq); 3869 while (list_ahc != NULL 3870 && ahc_softc_comp(list_ahc, ahc) <= 0) 3871 list_ahc = TAILQ_NEXT(list_ahc, links); 3872 if (list_ahc != NULL) 3873 TAILQ_INSERT_BEFORE(list_ahc, ahc, links); 3874 else 3875 TAILQ_INSERT_TAIL(&ahc_tailq, ahc, links); 3876 ahc->init_level++; 3877 } 3878 3879 /* 3880 * Verify that the passed in softc pointer is for a 3881 * controller that is still configured. 3882 */ 3883 struct ahc_softc * 3884 ahc_find_softc(struct ahc_softc *ahc) 3885 { 3886 struct ahc_softc *list_ahc; 3887 3888 TAILQ_FOREACH(list_ahc, &ahc_tailq, links) { 3889 if (list_ahc == ahc) 3890 return (ahc); 3891 } 3892 return (NULL); 3893 } 3894 3895 void 3896 ahc_set_unit(struct ahc_softc *ahc, int unit) 3897 { 3898 ahc->unit = unit; 3899 } 3900 3901 void 3902 ahc_set_name(struct ahc_softc *ahc, const char *name) 3903 { 3904 ahc->name = name; 3905 } 3906 3907 void 3908 ahc_free(struct ahc_softc *ahc) 3909 { 3910 int i; 3911 3912 ahc_fini_scbdata(ahc); 3913 switch (ahc->init_level) { 3914 default: 3915 case 2: 3916 ahc_shutdown(ahc); 3917 /* TAILQ_REMOVE(&ahc_tailq, ahc, links); XXX */ 3918 /* FALLTHROUGH */ 3919 case 1: 3920 ahc_freedmamem(ahc->parent_dmat, ahc->shared_data_size, 3921 ahc->shared_data_dmamap, (void *)ahc->qoutfifo, 3922 &ahc->shared_data_seg, ahc->shared_data_nseg); 3923 break; 3924 case 0: 3925 break; 3926 } 3927 3928 ahc_platform_free(ahc); 3929 for (i = 0; i < AHC_NUM_TARGETS; i++) { 3930 struct ahc_tmode_tstate *tstate; 3931 3932 tstate = ahc->enabled_targets[i]; 3933 if (tstate != NULL) { 3934 #if AHC_TARGET_MODE 3935 int j; 3936 3937 for (j = 0; j < AHC_NUM_LUNS; j++) { 3938 struct ahc_tmode_lstate *lstate; 3939 3940 lstate = tstate->enabled_luns[j]; 3941 if (lstate != NULL) { 3942 /*xpt_free_path(lstate->path);*/ 3943 free(lstate, M_DEVBUF); 3944 } 3945 } 3946 #endif 3947 free(tstate, M_DEVBUF); 3948 } 3949 } 3950 #if AHC_TARGET_MODE 3951 if (ahc->black_hole != NULL) { 3952 /*xpt_free_path(ahc->black_hole->path);*/ 3953 free(ahc->black_hole, M_DEVBUF); 3954 } 3955 #endif 3956 #ifndef __NetBSD__ 3957 if (ahc->name != NULL) 3958 free(ahc->name, M_DEVBUF); 3959 #endif 3960 if (ahc->seep_config != NULL) 3961 free(ahc->seep_config, M_DEVBUF); 3962 #if !defined(__FreeBSD__) && !defined(__NetBSD__) 3963 free(ahc, M_DEVBUF); 3964 #endif 3965 return; 3966 } 3967 3968 void 3969 ahc_shutdown(void *arg) 3970 { 3971 struct ahc_softc *ahc; 3972 int i; 3973 3974 ahc = arg; 3975 3976 /* This will reset most registers to 0, but not all */ 3977 ahc_reset(ahc); 3978 ahc_outb(ahc, SCSISEQ, 0); 3979 ahc_outb(ahc, SXFRCTL0, 0); 3980 ahc_outb(ahc, DSPCISTATUS, 0); 3981 3982 for (i = TARG_SCSIRATE; i < SCSICONF; i++) 3983 ahc_outb(ahc, i, 0); 3984 } 3985 3986 /* 3987 * Reset the controller and record some information about it 3988 * that is only available just after a reset. 3989 */ 3990 int 3991 ahc_reset(struct ahc_softc *ahc) 3992 { 3993 u_int sblkctl; 3994 u_int sxfrctl1_a, sxfrctl1_b; 3995 int wait; 3996 3997 /* 3998 * Preserve the value of the SXFRCTL1 register for all channels. 3999 * It contains settings that affect termination and we don't want 4000 * to disturb the integrity of the bus. 4001 */ 4002 ahc_pause(ahc); 4003 if ((ahc_inb(ahc, HCNTRL) & CHIPRST) != 0) { 4004 /* 4005 * The chip has not been initialized since 4006 * PCI/EISA/VLB bus reset. Don't trust 4007 * "left over BIOS data". 4008 */ 4009 ahc->flags |= AHC_NO_BIOS_INIT; 4010 } 4011 sxfrctl1_b = 0; 4012 if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7770) { 4013 u_int sblkctl1; 4014 4015 /* 4016 * Save channel B's settings in case this chip 4017 * is setup for TWIN channel operation. 4018 */ 4019 sblkctl1 = ahc_inb(ahc, SBLKCTL); 4020 ahc_outb(ahc, SBLKCTL, sblkctl1 | SELBUSB); 4021 sxfrctl1_b = ahc_inb(ahc, SXFRCTL1); 4022 ahc_outb(ahc, SBLKCTL, sblkctl1 & ~SELBUSB); 4023 } 4024 sxfrctl1_a = ahc_inb(ahc, SXFRCTL1); 4025 4026 ahc_outb(ahc, HCNTRL, CHIPRST | ahc->pause); 4027 4028 /* 4029 * Ensure that the reset has finished. We delay 1000us 4030 * prior to reading the register to make sure the chip 4031 * has sufficiently completed its reset to handle register 4032 * accesses. 4033 */ 4034 wait = 1000; 4035 do { 4036 ahc_delay(1000); 4037 } while (--wait && !(ahc_inb(ahc, HCNTRL) & CHIPRSTACK)); 4038 4039 if (wait == 0) { 4040 printf("%s: WARNING - Failed chip reset! " 4041 "Trying to initialize anyway.\n", ahc_name(ahc)); 4042 } 4043 ahc_outb(ahc, HCNTRL, ahc->pause); 4044 4045 /* Determine channel configuration */ 4046 sblkctl = ahc_inb(ahc, SBLKCTL) & (SELBUSB|SELWIDE); 4047 /* No Twin Channel PCI cards */ 4048 if ((ahc->chip & AHC_PCI) != 0) 4049 sblkctl &= ~SELBUSB; 4050 switch (sblkctl) { 4051 case 0: 4052 /* Single Narrow Channel */ 4053 break; 4054 case 2: 4055 /* Wide Channel */ 4056 ahc->features |= AHC_WIDE; 4057 break; 4058 case 8: 4059 /* Twin Channel */ 4060 ahc->features |= AHC_TWIN; 4061 break; 4062 default: 4063 printf(" Unsupported adapter type (0x%x). Ignoring\n", 4064 sblkctl); 4065 return(-1); 4066 } 4067 4068 /* 4069 * Reload sxfrctl1. 4070 * 4071 * We must always initialize STPWEN to 1 before we 4072 * restore the saved values. STPWEN is initialized 4073 * to a tri-state condition which can only be cleared 4074 * by turning it on. 4075 */ 4076 if ((ahc->features & AHC_TWIN) != 0) { 4077 u_int sblkctl1; 4078 4079 sblkctl1 = ahc_inb(ahc, SBLKCTL); 4080 ahc_outb(ahc, SBLKCTL, sblkctl1 | SELBUSB); 4081 ahc_outb(ahc, SXFRCTL1, sxfrctl1_b); 4082 ahc_outb(ahc, SBLKCTL, sblkctl1 & ~SELBUSB); 4083 } 4084 ahc_outb(ahc, SXFRCTL1, sxfrctl1_a); 4085 4086 #ifdef AHC_DUMP_SEQ 4087 if (ahc->init_level == 0) 4088 ahc_dumpseq(ahc); 4089 #endif 4090 4091 return (0); 4092 } 4093 4094 /* 4095 * Determine the number of SCBs available on the controller 4096 */ 4097 int 4098 ahc_probe_scbs(struct ahc_softc *ahc) { 4099 int i; 4100 4101 for (i = 0; i < AHC_SCB_MAX; i++) { 4102 4103 ahc_outb(ahc, SCBPTR, i); 4104 ahc_outb(ahc, SCB_BASE, i); 4105 if (ahc_inb(ahc, SCB_BASE) != i) 4106 break; 4107 ahc_outb(ahc, SCBPTR, 0); 4108 if (ahc_inb(ahc, SCB_BASE) != 0) 4109 break; 4110 } 4111 return (i); 4112 } 4113 4114 #if 0 4115 static void 4116 ahc_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) 4117 { 4118 bus_addr_t *baddr; 4119 4120 baddr = (bus_addr_t *)arg; 4121 *baddr = segs->ds_addr; 4122 } 4123 #endif 4124 4125 static void 4126 ahc_build_free_scb_list(struct ahc_softc *ahc) 4127 { 4128 int scbsize; 4129 int i; 4130 4131 scbsize = 32; 4132 if ((ahc->flags & AHC_LSCBS_ENABLED) != 0) 4133 scbsize = 64; 4134 4135 for (i = 0; i < ahc->scb_data->maxhscbs; i++) { 4136 int j; 4137 4138 ahc_outb(ahc, SCBPTR, i); 4139 4140 /* 4141 * Touch all SCB bytes to avoid parity errors 4142 * should one of our debugging routines read 4143 * an otherwise uninitialized byte. 4144 */ 4145 for (j = 0; j < scbsize; j++) 4146 ahc_outb(ahc, SCB_BASE+j, 0xFF); 4147 4148 /* Clear the control byte. */ 4149 ahc_outb(ahc, SCB_CONTROL, 0); 4150 4151 /* Set the next pointer */ 4152 if ((ahc->flags & AHC_PAGESCBS) != 0) 4153 ahc_outb(ahc, SCB_NEXT, i+1); 4154 else 4155 ahc_outb(ahc, SCB_NEXT, SCB_LIST_NULL); 4156 4157 /* Make the tag number, SCSIID, and lun invalid */ 4158 ahc_outb(ahc, SCB_TAG, SCB_LIST_NULL); 4159 ahc_outb(ahc, SCB_SCSIID, 0xFF); 4160 ahc_outb(ahc, SCB_LUN, 0xFF); 4161 } 4162 4163 /* Make sure that the last SCB terminates the free list */ 4164 ahc_outb(ahc, SCBPTR, i-1); 4165 ahc_outb(ahc, SCB_NEXT, SCB_LIST_NULL); 4166 } 4167 4168 static int 4169 ahc_init_scbdata(struct ahc_softc *ahc) 4170 { 4171 struct scb_data *scb_data; 4172 4173 scb_data = ahc->scb_data; 4174 SLIST_INIT(&scb_data->free_scbs); 4175 SLIST_INIT(&scb_data->sg_maps); 4176 4177 /* Allocate SCB resources */ 4178 scb_data->scbarray = malloc(sizeof(struct scb) * AHC_SCB_MAX_ALLOC, 4179 M_DEVBUF, M_WAITOK | M_ZERO); 4180 4181 /* Determine the number of hardware SCBs and initialize them */ 4182 4183 scb_data->maxhscbs = ahc_probe_scbs(ahc); 4184 if ((ahc->flags & AHC_PAGESCBS) != 0) { 4185 /* SCB 0 heads the free list */ 4186 ahc_outb(ahc, FREE_SCBH, 0); 4187 } else { 4188 ahc_outb(ahc, FREE_SCBH, SCB_LIST_NULL); 4189 } 4190 4191 if (ahc->scb_data->maxhscbs == 0) { 4192 printf("%s: No SCB space found\n", ahc_name(ahc)); 4193 return (ENXIO); 4194 } 4195 4196 ahc_build_free_scb_list(ahc); 4197 4198 /* 4199 * Create our DMA tags. These tags define the kinds of device 4200 * accessible memory allocations and memory mappings we will 4201 * need to perform during normal operation. 4202 * 4203 * Unless we need to further restrict the allocation, we rely 4204 * on the restrictions of the parent dmat, hence the common 4205 * use of MAXADDR and MAXSIZE. 4206 */ 4207 4208 if (ahc_createdmamem(ahc->parent_dmat, 4209 AHC_SCB_MAX * sizeof(struct hardware_scb), ahc->sc_dmaflags, 4210 &scb_data->hscb_dmamap, 4211 (void **)&scb_data->hscbs, &scb_data->hscb_busaddr, 4212 &scb_data->hscb_seg, &scb_data->hscb_nseg, ahc_name(ahc), 4213 "hardware SCB structures") < 0) 4214 goto error_exit; 4215 4216 scb_data->init_level++; 4217 4218 if (ahc_createdmamem(ahc->parent_dmat, 4219 AHC_SCB_MAX * sizeof(struct scsi_sense_data), ahc->sc_dmaflags, 4220 &scb_data->sense_dmamap, (void **)&scb_data->sense, 4221 &scb_data->sense_busaddr, &scb_data->sense_seg, 4222 &scb_data->sense_nseg, ahc_name(ahc), "sense buffers") < 0) 4223 goto error_exit; 4224 4225 scb_data->init_level++; 4226 4227 /* Perform initial CCB allocation */ 4228 memset(scb_data->hscbs, 0, 4229 AHC_SCB_MAX_ALLOC * sizeof(struct hardware_scb)); 4230 ahc_alloc_scbs(ahc); 4231 scb_data->init_level++; 4232 4233 if (scb_data->numscbs == 0) { 4234 printf("%s: ahc_init_scbdata - " 4235 "Unable to allocate initial scbs\n", 4236 ahc_name(ahc)); 4237 goto error_exit; 4238 } 4239 4240 /* 4241 * Tell the sequencer which SCB will be the next one it receives. 4242 */ 4243 ahc->next_queued_scb = ahc_get_scb(ahc); 4244 ahc_outb(ahc, NEXT_QUEUED_SCB, ahc->next_queued_scb->hscb->tag); 4245 4246 /* 4247 * Note that we were successful 4248 */ 4249 return (0); 4250 4251 error_exit: 4252 4253 return (ENOMEM); 4254 } 4255 4256 static void 4257 ahc_fini_scbdata(struct ahc_softc *ahc) 4258 { 4259 struct scb_data *scb_data; 4260 4261 scb_data = ahc->scb_data; 4262 if (scb_data == NULL) 4263 return; 4264 4265 switch (scb_data->init_level) { 4266 default: 4267 case 5: 4268 { 4269 struct sg_map_node *sg_map; 4270 4271 while ((sg_map = SLIST_FIRST(&scb_data->sg_maps))!= NULL) { 4272 SLIST_REMOVE_HEAD(&scb_data->sg_maps, links); 4273 ahc_freedmamem(ahc->parent_dmat, PAGE_SIZE, 4274 sg_map->sg_dmamap, (void *)sg_map->sg_vaddr, 4275 &sg_map->sg_dmasegs, sg_map->sg_nseg); 4276 free(sg_map, M_DEVBUF); 4277 } 4278 } 4279 /*FALLTHROUGH*/ 4280 case 4: 4281 ahc_freedmamem(ahc->parent_dmat, 4282 AHC_SCB_MAX * sizeof(struct scsi_sense_data), 4283 scb_data->sense_dmamap, (void *)scb_data->sense, 4284 &scb_data->sense_seg, scb_data->sense_nseg); 4285 /*FALLTHROUGH*/ 4286 case 3: 4287 ahc_freedmamem(ahc->parent_dmat, 4288 AHC_SCB_MAX * sizeof(struct hardware_scb), 4289 scb_data->hscb_dmamap, (void *)scb_data->hscbs, 4290 &scb_data->hscb_seg, scb_data->hscb_nseg); 4291 /*FALLTHROUGH*/ 4292 case 2: 4293 case 1: 4294 case 0: 4295 break; 4296 } 4297 if (scb_data->scbarray != NULL) 4298 free(scb_data->scbarray, M_DEVBUF); 4299 } 4300 4301 int 4302 ahc_alloc_scbs(struct ahc_softc *ahc) 4303 { 4304 struct scb_data *scb_data; 4305 struct scb *next_scb; 4306 struct sg_map_node *sg_map; 4307 bus_addr_t physaddr; 4308 struct ahc_dma_seg *segs; 4309 int newcount; 4310 int i; 4311 4312 scb_data = ahc->scb_data; 4313 if (scb_data->numscbs >= AHC_SCB_MAX_ALLOC) 4314 /* Can't allocate any more */ 4315 return (0); 4316 4317 next_scb = &scb_data->scbarray[scb_data->numscbs]; 4318 4319 sg_map = malloc(sizeof(*sg_map), M_DEVBUF, M_WAITOK); 4320 4321 if (sg_map == NULL) 4322 return (0); 4323 4324 /* Allocate S/G space for the next batch of SCBS */ 4325 if (ahc_createdmamem(ahc->parent_dmat, PAGE_SIZE, ahc->sc_dmaflags, 4326 &sg_map->sg_dmamap, 4327 (void **)&sg_map->sg_vaddr, &sg_map->sg_physaddr, 4328 &sg_map->sg_dmasegs, &sg_map->sg_nseg, 4329 ahc_name(ahc), 4330 "SG space") < 0) { 4331 free(sg_map, M_DEVBUF); 4332 return (0); 4333 } 4334 4335 SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links); 4336 4337 segs = sg_map->sg_vaddr; 4338 physaddr = sg_map->sg_physaddr; 4339 4340 newcount = (PAGE_SIZE / (AHC_NSEG * sizeof(struct ahc_dma_seg))); 4341 newcount = MIN(newcount, (AHC_SCB_MAX_ALLOC - scb_data->numscbs)); 4342 for (i = 0; i < newcount; i++) { 4343 struct scb_platform_data *pdata; 4344 int error; 4345 4346 pdata = malloc(sizeof(*pdata), M_DEVBUF, M_WAITOK); 4347 if (pdata == NULL) 4348 break; 4349 next_scb->platform_data = pdata; 4350 next_scb->sg_map = sg_map; 4351 next_scb->sg_list = segs; 4352 /* 4353 * The sequencer always starts with the second entry. 4354 * The first entry is embedded in the scb. 4355 */ 4356 next_scb->sg_list_phys = physaddr + sizeof(struct ahc_dma_seg); 4357 next_scb->ahc_softc = ahc; 4358 next_scb->flags = SCB_FREE; 4359 4360 error = bus_dmamap_create(ahc->parent_dmat, 4361 AHC_MAXTRANSFER_SIZE, AHC_NSEG, MAXPHYS, 0, 4362 BUS_DMA_WAITOK|BUS_DMA_ALLOCNOW|ahc->sc_dmaflags, 4363 &next_scb->dmamap); 4364 if (error != 0) { 4365 free(pdata, M_DEVBUF); 4366 break; 4367 } 4368 4369 next_scb->hscb = &scb_data->hscbs[scb_data->numscbs]; 4370 next_scb->hscb->tag = ahc->scb_data->numscbs; 4371 SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs, 4372 next_scb, links.sle); 4373 segs += AHC_NSEG; 4374 physaddr += (AHC_NSEG * sizeof(struct ahc_dma_seg)); 4375 next_scb++; 4376 ahc->scb_data->numscbs++; 4377 } 4378 return (newcount); 4379 } 4380 4381 void 4382 ahc_controller_info(struct ahc_softc *ahc, char *tbuf, size_t l) 4383 { 4384 size_t len; 4385 4386 len = snprintf(tbuf, l, "%s: ", 4387 ahc_chip_names[ahc->chip & AHC_CHIPID_MASK]); 4388 if (len > l) 4389 return; 4390 if ((ahc->features & AHC_TWIN) != 0) 4391 len += snprintf(tbuf + len, l - len, 4392 "Twin Channel, A SCSI Id=%d, B SCSI Id=%d, primary %c, ", 4393 ahc->our_id, ahc->our_id_b, 4394 (ahc->flags & AHC_PRIMARY_CHANNEL) + 'A'); 4395 else { 4396 const char *speed; 4397 const char *type; 4398 4399 speed = ""; 4400 if ((ahc->features & AHC_ULTRA) != 0) { 4401 speed = "Ultra "; 4402 } else if ((ahc->features & AHC_DT) != 0) { 4403 speed = "Ultra160 "; 4404 } else if ((ahc->features & AHC_ULTRA2) != 0) { 4405 speed = "Ultra2 "; 4406 } 4407 if ((ahc->features & AHC_WIDE) != 0) { 4408 type = "Wide"; 4409 } else { 4410 type = "Single"; 4411 } 4412 len += snprintf(tbuf + len, l - len, "%s%s Channel %c, SCSI Id=%d, ", 4413 speed, type, ahc->channel, ahc->our_id); 4414 } 4415 if (len > l) 4416 return; 4417 4418 if ((ahc->flags & AHC_PAGESCBS) != 0) 4419 snprintf(tbuf + len, l - len, "%d/%d SCBs", 4420 ahc->scb_data->maxhscbs, AHC_MAX_QUEUE); 4421 else 4422 snprintf(tbuf + len, l - len, "%d SCBs", ahc->scb_data->maxhscbs); 4423 } 4424 4425 /* 4426 * Start the board, ready for normal operation 4427 */ 4428 int 4429 ahc_init(struct ahc_softc *ahc) 4430 { 4431 int max_targ; 4432 int i; 4433 int term; 4434 u_int scsi_conf; 4435 u_int scsiseq_template; 4436 u_int ultraenb; 4437 u_int discenable; 4438 u_int tagenable; 4439 size_t driver_data_size; 4440 uint32_t physaddr; 4441 4442 #ifdef AHC_DEBUG 4443 if ((ahc_debug & AHC_DEBUG_SEQUENCER) != 0) 4444 ahc->flags |= AHC_SEQUENCER_DEBUG; 4445 #endif 4446 4447 #ifdef AHC_PRINT_SRAM 4448 printf("Scratch Ram:"); 4449 for (i = 0x20; i < 0x5f; i++) { 4450 if (((i % 8) == 0) && (i != 0)) { 4451 printf ("\n "); 4452 } 4453 printf (" 0x%x", ahc_inb(ahc, i)); 4454 } 4455 if ((ahc->features & AHC_MORE_SRAM) != 0) { 4456 for (i = 0x70; i < 0x7f; i++) { 4457 if (((i % 8) == 0) && (i != 0)) { 4458 printf ("\n "); 4459 } 4460 printf (" 0x%x", ahc_inb(ahc, i)); 4461 } 4462 } 4463 printf ("\n"); 4464 /* 4465 * Reading uninitialized scratch ram may 4466 * generate parity errors. 4467 */ 4468 ahc_outb(ahc, CLRINT, CLRPARERR); 4469 ahc_outb(ahc, CLRINT, CLRBRKADRINT); 4470 #endif 4471 max_targ = 15; 4472 4473 /* 4474 * Assume we have a board at this stage and it has been reset. 4475 */ 4476 if ((ahc->flags & AHC_USEDEFAULTS) != 0) 4477 ahc->our_id = ahc->our_id_b = 7; 4478 4479 /* 4480 * Default to allowing initiator operations. 4481 */ 4482 ahc->flags |= AHC_INITIATORROLE; 4483 4484 /* 4485 * Only allow target mode features if this unit has them enabled. 4486 */ 4487 //if ((AHC_TMODE_ENABLE & (0x1 << ahc->unit)) == 0) 4488 ahc->features &= ~AHC_TARGETMODE; 4489 4490 /* 4491 * DMA tag for our command fifos and other data in system memory 4492 * the card's sequencer must be able to access. For initiator 4493 * roles, we need to allocate space for the qinfifo and qoutfifo. 4494 * The qinfifo and qoutfifo are composed of 256 1 byte elements. 4495 * When providing for the target mode role, we must additionally 4496 * provide space for the incoming target command fifo and an extra 4497 * byte to deal with a DMA bug in some chip versions. 4498 */ 4499 driver_data_size = 2 * 256 * sizeof(uint8_t); 4500 if ((ahc->features & AHC_TARGETMODE) != 0) 4501 driver_data_size += AHC_TMODE_CMDS * sizeof(struct target_cmd) 4502 + /*DMA WideOdd Bug Buffer*/1; 4503 ahc->shared_data_size = driver_data_size; 4504 4505 if (ahc_createdmamem(ahc->parent_dmat, ahc->shared_data_size, 4506 ahc->sc_dmaflags, 4507 &ahc->shared_data_dmamap, (void **)&ahc->qoutfifo, 4508 &ahc->shared_data_busaddr, &ahc->shared_data_seg, 4509 &ahc->shared_data_nseg, ahc_name(ahc), 4510 "shared data") < 0) 4511 return (ENOMEM); 4512 4513 ahc->init_level++; 4514 4515 if ((ahc->features & AHC_TARGETMODE) != 0) { 4516 ahc->targetcmds = (struct target_cmd *)ahc->qoutfifo; 4517 ahc->qoutfifo = (uint8_t *)&ahc->targetcmds[AHC_TMODE_CMDS]; 4518 ahc->dma_bug_buf = ahc->shared_data_busaddr 4519 + ahc->shared_data_size - 1; 4520 /* All target command blocks start out invalid. */ 4521 for (i = 0; i < AHC_TMODE_CMDS; i++) 4522 ahc->targetcmds[i].cmd_valid = 0; 4523 ahc_sync_tqinfifo(ahc, BUS_DMASYNC_PREREAD); 4524 ahc->tqinfifonext = 1; 4525 ahc_outb(ahc, KERNEL_TQINPOS, ahc->tqinfifonext - 1); 4526 ahc_outb(ahc, TQINPOS, ahc->tqinfifonext); 4527 ahc->qoutfifo = (uint8_t *)&ahc->targetcmds[256]; 4528 } 4529 ahc->qinfifo = &ahc->qoutfifo[256]; 4530 4531 ahc->init_level++; 4532 4533 /* Allocate SCB data now that buffer_dmat is initialized */ 4534 if (ahc->scb_data->maxhscbs == 0) 4535 if (ahc_init_scbdata(ahc) != 0) 4536 return (ENOMEM); 4537 4538 if (bootverbose) 4539 printf("%s: found %d SCBs\n", ahc_name(ahc), 4540 ahc->scb_data->maxhscbs); 4541 4542 /* 4543 * Allocate a tstate to house information for our 4544 * initiator presence on the bus as well as the user 4545 * data for any target mode initiator. 4546 */ 4547 if (ahc_alloc_tstate(ahc, ahc->our_id, 'A') == NULL) { 4548 printf("%s: unable to allocate ahc_tmode_tstate. " 4549 "Failing attach\n", ahc_name(ahc)); 4550 return (ENOMEM); 4551 } 4552 4553 if ((ahc->features & AHC_TWIN) != 0) { 4554 if (ahc_alloc_tstate(ahc, ahc->our_id_b, 'B') == NULL) { 4555 printf("%s: unable to allocate ahc_tmode_tstate. " 4556 "Failing attach\n", ahc_name(ahc)); 4557 return (ENOMEM); 4558 } 4559 } 4560 4561 ahc_outb(ahc, SEQ_FLAGS, 0); 4562 ahc_outb(ahc, SEQ_FLAGS2, 0); 4563 4564 if (ahc->scb_data->maxhscbs < AHC_SCB_MAX_ALLOC) { 4565 ahc->flags |= AHC_PAGESCBS; 4566 } else { 4567 ahc->flags &= ~AHC_PAGESCBS; 4568 } 4569 4570 #ifdef AHC_DEBUG 4571 if (ahc_debug & AHC_SHOW_MISC) { 4572 printf("%s: hardware scb %lu bytes; kernel scb %lu bytes; " 4573 "ahc_dma %lu bytes\n", 4574 ahc_name(ahc), 4575 (u_long)sizeof(struct hardware_scb), 4576 (u_long)sizeof(struct scb), 4577 (u_long)sizeof(struct ahc_dma_seg)); 4578 } 4579 #endif /* AHC_DEBUG */ 4580 4581 /* 4582 * Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1, for both channels 4583 */ 4584 if (ahc->features & AHC_TWIN) { 4585 4586 /* 4587 * The device is gated to channel B after a chip reset, 4588 * so set those values first 4589 */ 4590 ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) | SELBUSB); 4591 term = (ahc->flags & AHC_TERM_ENB_B) != 0 ? STPWEN : 0; 4592 ahc_outb(ahc, SCSIID, ahc->our_id_b); 4593 scsi_conf = ahc_inb(ahc, SCSICONF + 1); 4594 ahc_outb(ahc, SXFRCTL1, (scsi_conf & (ENSPCHK|STIMESEL)) 4595 |term|ahc->seltime_b|ENSTIMER|ACTNEGEN); 4596 if ((ahc->features & AHC_ULTRA2) != 0) 4597 ahc_outb(ahc, SIMODE0, ahc_inb(ahc, SIMODE0)|ENIOERR); 4598 ahc_outb(ahc, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR); 4599 ahc_outb(ahc, SXFRCTL0, DFON|SPIOEN); 4600 4601 if ((scsi_conf & RESET_SCSI) != 0 4602 && (ahc->flags & AHC_INITIATORROLE) != 0) 4603 ahc->flags |= AHC_RESET_BUS_B; 4604 4605 /* Select Channel A */ 4606 ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) & ~SELBUSB); 4607 } 4608 4609 term = (ahc->flags & AHC_TERM_ENB_A) != 0 ? STPWEN : 0; 4610 if ((ahc->features & AHC_ULTRA2) != 0) 4611 ahc_outb(ahc, SCSIID_ULTRA2, ahc->our_id); 4612 else 4613 ahc_outb(ahc, SCSIID, ahc->our_id); 4614 scsi_conf = ahc_inb(ahc, SCSICONF); 4615 ahc_outb(ahc, SXFRCTL1, (scsi_conf & (ENSPCHK|STIMESEL)) 4616 |term|ahc->seltime 4617 |ENSTIMER|ACTNEGEN); 4618 if ((ahc->features & AHC_ULTRA2) != 0) 4619 ahc_outb(ahc, SIMODE0, ahc_inb(ahc, SIMODE0)|ENIOERR); 4620 ahc_outb(ahc, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR); 4621 ahc_outb(ahc, SXFRCTL0, DFON|SPIOEN); 4622 4623 if ((scsi_conf & RESET_SCSI) != 0 4624 && (ahc->flags & AHC_INITIATORROLE) != 0) 4625 ahc->flags |= AHC_RESET_BUS_A; 4626 4627 /* 4628 * Look at the information that board initialization or 4629 * the board bios has left us. 4630 */ 4631 ultraenb = 0; 4632 tagenable = ALL_TARGETS_MASK; 4633 4634 /* Grab the disconnection disable table and invert it for our needs */ 4635 if ((ahc->flags & AHC_USEDEFAULTS) != 0) { 4636 printf("%s: Host Adapter BIOS disabled. Using default SCSI " 4637 "host and target device parameters\n", ahc_name(ahc)); 4638 ahc->flags |= AHC_EXTENDED_TRANS_A|AHC_EXTENDED_TRANS_B| 4639 AHC_TERM_ENB_A|AHC_TERM_ENB_B; 4640 discenable = ALL_TARGETS_MASK; 4641 if ((ahc->features & AHC_ULTRA) != 0) 4642 ultraenb = ALL_TARGETS_MASK; 4643 } else if ((ahc->flags & AHC_USETARGETDEFAULTS) != 0) { 4644 printf("%s: Host Adapter has no SEEPROM. Using default SCSI" 4645 " target parameters\n", ahc_name(ahc)); 4646 ahc->flags |= AHC_EXTENDED_TRANS_A|AHC_EXTENDED_TRANS_B; 4647 discenable = ALL_TARGETS_MASK; 4648 if ((ahc->features & AHC_ULTRA) != 0) 4649 ultraenb = ALL_TARGETS_MASK; 4650 } else { 4651 discenable = ~((ahc_inb(ahc, DISC_DSB + 1) << 8) 4652 | ahc_inb(ahc, DISC_DSB)); 4653 if ((ahc->features & (AHC_ULTRA|AHC_ULTRA2)) != 0) 4654 ultraenb = (ahc_inb(ahc, ULTRA_ENB + 1) << 8) 4655 | ahc_inb(ahc, ULTRA_ENB); 4656 } 4657 4658 if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0) 4659 max_targ = 7; 4660 4661 for (i = 0; i <= max_targ; i++) { 4662 struct ahc_initiator_tinfo *tinfo; 4663 struct ahc_tmode_tstate *tstate; 4664 u_int our_id; 4665 u_int target_id; 4666 char channel; 4667 4668 channel = 'A'; 4669 our_id = ahc->our_id; 4670 target_id = i; 4671 if (i > 7 && (ahc->features & AHC_TWIN) != 0) { 4672 channel = 'B'; 4673 our_id = ahc->our_id_b; 4674 target_id = i % 8; 4675 } 4676 tinfo = ahc_fetch_transinfo(ahc, channel, our_id, 4677 target_id, &tstate); 4678 /* Default to async narrow across the board */ 4679 memset(tinfo, 0, sizeof(*tinfo)); 4680 if (ahc->flags & (AHC_USEDEFAULTS | AHC_USETARGETDEFAULTS)) { 4681 if ((ahc->features & AHC_WIDE) != 0) 4682 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT; 4683 4684 /* 4685 * These will be truncated when we determine the 4686 * connection type we have with the target. 4687 */ 4688 tinfo->user.period = ahc_syncrates->period; 4689 tinfo->user.offset = ~0; 4690 } else { 4691 u_int scsirate; 4692 uint16_t mask; 4693 4694 /* Take the settings leftover in scratch RAM. */ 4695 scsirate = ahc_inb(ahc, TARG_SCSIRATE + i); 4696 mask = (0x01 << i); 4697 if ((ahc->features & AHC_ULTRA2) != 0) { 4698 u_int offset; 4699 u_int maxsync; 4700 4701 if ((scsirate & SOFS) == 0x0F) { 4702 /* 4703 * Haven't negotiated yet, 4704 * so the format is different. 4705 */ 4706 scsirate = (scsirate & SXFR) >> 4 4707 | (ultraenb & mask) 4708 ? 0x08 : 0x0 4709 | (scsirate & WIDEXFER); 4710 offset = MAX_OFFSET_ULTRA2; 4711 } else 4712 offset = ahc_inb(ahc, TARG_OFFSET + i); 4713 if ((scsirate & ~WIDEXFER) == 0 && offset != 0) 4714 /* Set to the lowest sync rate, 5MHz */ 4715 scsirate |= 0x1c; 4716 maxsync = AHC_SYNCRATE_ULTRA2; 4717 if ((ahc->features & AHC_DT) != 0) 4718 maxsync = AHC_SYNCRATE_DT; 4719 tinfo->user.period = 4720 ahc_find_period(ahc, scsirate, maxsync); 4721 if (offset == 0) 4722 tinfo->user.period = 0; 4723 else 4724 tinfo->user.offset = ~0; 4725 if ((scsirate & SXFR_ULTRA2) <= 8/*10MHz*/ 4726 && (ahc->features & AHC_DT) != 0) 4727 tinfo->user.ppr_options = 4728 MSG_EXT_PPR_DT_REQ; 4729 } else if ((scsirate & SOFS) != 0) { 4730 if ((scsirate & SXFR) == 0x40 4731 && (ultraenb & mask) != 0) { 4732 /* Treat 10MHz as a non-ultra speed */ 4733 scsirate &= ~SXFR; 4734 ultraenb &= ~mask; 4735 } 4736 tinfo->user.period = 4737 ahc_find_period(ahc, scsirate, 4738 (ultraenb & mask) 4739 ? AHC_SYNCRATE_ULTRA 4740 : AHC_SYNCRATE_FAST); 4741 if (tinfo->user.period != 0) 4742 tinfo->user.offset = ~0; 4743 } 4744 if (tinfo->user.period == 0) 4745 tinfo->user.offset = 0; 4746 if ((scsirate & WIDEXFER) != 0 4747 && (ahc->features & AHC_WIDE) != 0) 4748 tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT; 4749 tinfo->user.protocol_version = 4; 4750 if ((ahc->features & AHC_DT) != 0) 4751 tinfo->user.transport_version = 3; 4752 else 4753 tinfo->user.transport_version = 2; 4754 tinfo->goal.protocol_version = 2; 4755 tinfo->goal.transport_version = 2; 4756 tinfo->curr.protocol_version = 2; 4757 tinfo->curr.transport_version = 2; 4758 } 4759 tstate->ultraenb = 0; 4760 tstate->discenable = discenable; 4761 } 4762 ahc->user_discenable = discenable; 4763 ahc->user_tagenable = tagenable; 4764 4765 /* There are no untagged SCBs active yet. */ 4766 for (i = 0; i < 16; i++) { 4767 ahc_unbusy_tcl(ahc, BUILD_TCL(i << 4, 0)); 4768 if ((ahc->flags & AHC_SCB_BTT) != 0) { 4769 int lun; 4770 4771 /* 4772 * The SCB based BTT allows an entry per 4773 * target and lun pair. 4774 */ 4775 for (lun = 1; lun < AHC_NUM_LUNS; lun++) 4776 ahc_unbusy_tcl(ahc, BUILD_TCL(i << 4, lun)); 4777 } 4778 } 4779 4780 /* All of our queues are empty */ 4781 for (i = 0; i < 256; i++) 4782 ahc->qoutfifo[i] = SCB_LIST_NULL; 4783 4784 ahc_sync_qoutfifo(ahc, BUS_DMASYNC_PREREAD); 4785 4786 for (i = 0; i < 256; i++) 4787 ahc->qinfifo[i] = SCB_LIST_NULL; 4788 4789 if ((ahc->features & AHC_MULTI_TID) != 0) { 4790 ahc_outb(ahc, TARGID, 0); 4791 ahc_outb(ahc, TARGID + 1, 0); 4792 } 4793 4794 /* 4795 * Tell the sequencer where it can find our arrays in memory. 4796 */ 4797 physaddr = ahc->scb_data->hscb_busaddr; 4798 ahc_outb(ahc, HSCB_ADDR, physaddr & 0xFF); 4799 ahc_outb(ahc, HSCB_ADDR + 1, (physaddr >> 8) & 0xFF); 4800 ahc_outb(ahc, HSCB_ADDR + 2, (physaddr >> 16) & 0xFF); 4801 ahc_outb(ahc, HSCB_ADDR + 3, (physaddr >> 24) & 0xFF); 4802 4803 physaddr = ahc->shared_data_busaddr; 4804 ahc_outb(ahc, SHARED_DATA_ADDR, physaddr & 0xFF); 4805 ahc_outb(ahc, SHARED_DATA_ADDR + 1, (physaddr >> 8) & 0xFF); 4806 ahc_outb(ahc, SHARED_DATA_ADDR + 2, (physaddr >> 16) & 0xFF); 4807 ahc_outb(ahc, SHARED_DATA_ADDR + 3, (physaddr >> 24) & 0xFF); 4808 4809 /* 4810 * Initialize the group code to command length table. 4811 * This overrides the values in TARG_SCSIRATE, so only 4812 * setup the table after we have processed that information. 4813 */ 4814 ahc_outb(ahc, CMDSIZE_TABLE, 5); 4815 ahc_outb(ahc, CMDSIZE_TABLE + 1, 9); 4816 ahc_outb(ahc, CMDSIZE_TABLE + 2, 9); 4817 ahc_outb(ahc, CMDSIZE_TABLE + 3, 0); 4818 ahc_outb(ahc, CMDSIZE_TABLE + 4, 15); 4819 ahc_outb(ahc, CMDSIZE_TABLE + 5, 11); 4820 ahc_outb(ahc, CMDSIZE_TABLE + 6, 0); 4821 ahc_outb(ahc, CMDSIZE_TABLE + 7, 0); 4822 4823 /* Tell the sequencer of our initial queue positions */ 4824 ahc_outb(ahc, KERNEL_QINPOS, 0); 4825 ahc_outb(ahc, QINPOS, 0); 4826 ahc_outb(ahc, QOUTPOS, 0); 4827 4828 /* 4829 * Use the built in queue management registers 4830 * if they are available. 4831 */ 4832 if ((ahc->features & AHC_QUEUE_REGS) != 0) { 4833 ahc_outb(ahc, QOFF_CTLSTA, SCB_QSIZE_256); 4834 ahc_outb(ahc, SDSCB_QOFF, 0); 4835 ahc_outb(ahc, SNSCB_QOFF, 0); 4836 ahc_outb(ahc, HNSCB_QOFF, 0); 4837 } 4838 4839 4840 /* We don't have any waiting selections */ 4841 ahc_outb(ahc, WAITING_SCBH, SCB_LIST_NULL); 4842 4843 /* Our disconnection list is empty too */ 4844 ahc_outb(ahc, DISCONNECTED_SCBH, SCB_LIST_NULL); 4845 4846 /* Message out buffer starts empty */ 4847 ahc_outb(ahc, MSG_OUT, MSG_NOOP); 4848 4849 /* 4850 * Setup the allowed SCSI Sequences based on operational mode. 4851 * If we are a target, we'll enable select in operations once 4852 * we've had a lun enabled. 4853 */ 4854 scsiseq_template = ENSELO|ENAUTOATNO|ENAUTOATNP; 4855 if ((ahc->flags & AHC_INITIATORROLE) != 0) 4856 scsiseq_template |= ENRSELI; 4857 ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq_template); 4858 4859 /* 4860 * Load the Sequencer program and Enable the adapter 4861 * in "fast" mode. 4862 */ 4863 if (bootverbose) 4864 printf("%s: Downloading Sequencer Program...", 4865 ahc_name(ahc)); 4866 4867 ahc_loadseq(ahc); 4868 4869 if ((ahc->features & AHC_ULTRA2) != 0) { 4870 int wait; 4871 4872 /* 4873 * Wait for up to 500ms for our transceivers 4874 * to settle. If the adapter does not have 4875 * a cable attached, the transceivers may 4876 * never settle, so don't complain if we 4877 * fail here. 4878 */ 4879 ahc_pause(ahc); 4880 for (wait = 5000; 4881 (ahc_inb(ahc, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait; 4882 wait--) 4883 ahc_delay(100); 4884 ahc_unpause(ahc); 4885 } 4886 4887 return (0); 4888 } 4889 4890 void 4891 ahc_intr_enable(struct ahc_softc *ahc, int enable) 4892 { 4893 u_int hcntrl; 4894 4895 hcntrl = ahc_inb(ahc, HCNTRL); 4896 hcntrl &= ~INTEN; 4897 ahc->pause &= ~INTEN; 4898 ahc->unpause &= ~INTEN; 4899 if (enable) { 4900 hcntrl |= INTEN; 4901 ahc->pause |= INTEN; 4902 ahc->unpause |= INTEN; 4903 } 4904 ahc_outb(ahc, HCNTRL, hcntrl); 4905 } 4906 4907 /* 4908 * Ensure that the card is paused in a location 4909 * outside of all critical sections and that all 4910 * pending work is completed prior to returning. 4911 * This routine should only be called from outside 4912 * an interrupt context. 4913 */ 4914 void 4915 ahc_pause_and_flushwork(struct ahc_softc *ahc) 4916 { 4917 int intstat; 4918 int maxloops; 4919 int paused; 4920 4921 maxloops = 1000; 4922 ahc->flags |= AHC_ALL_INTERRUPTS; 4923 intstat = 0; 4924 paused = FALSE; 4925 do { 4926 if (paused) 4927 ahc_unpause(ahc); 4928 ahc_intr(ahc); 4929 ahc_pause(ahc); 4930 paused = TRUE; 4931 ahc_outb(ahc, SCSISEQ, ahc_inb(ahc, SCSISEQ) & ~ENSELO); 4932 ahc_clear_critical_section(ahc); 4933 if (intstat == 0xFF && (ahc->features & AHC_REMOVABLE) != 0) 4934 break; 4935 } while (--maxloops 4936 && (((intstat = ahc_inb(ahc, INTSTAT)) & INT_PEND) != 0 4937 || (ahc_inb(ahc, SSTAT0) & (SELDO|SELINGO)))); 4938 if (maxloops == 0) { 4939 printf("Infinite interrupt loop, INTSTAT = %x", 4940 ahc_inb(ahc, INTSTAT)); 4941 } 4942 ahc_platform_flushwork(ahc); 4943 ahc->flags &= ~AHC_ALL_INTERRUPTS; 4944 } 4945 4946 int 4947 ahc_suspend(struct ahc_softc *ahc) 4948 { 4949 uint8_t *ptr; 4950 int i; 4951 4952 ahc_pause_and_flushwork(ahc); 4953 4954 if (LIST_FIRST(&ahc->pending_scbs) != NULL) 4955 return (EBUSY); 4956 4957 #if AHC_TARGET_MODE 4958 /* 4959 * XXX What about ATIOs that have not yet been serviced? 4960 * Perhaps we should just refuse to be suspended if we 4961 * are acting in a target role. 4962 */ 4963 if (ahc->pending_device != NULL) 4964 return (EBUSY); 4965 #endif 4966 4967 /* Save volatile registers */ 4968 if ((ahc->features & AHC_TWIN) != 0) { 4969 ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) | SELBUSB); 4970 ahc->suspend_state.channel[1].scsiseq = ahc_inb(ahc, SCSISEQ); 4971 ahc->suspend_state.channel[1].sxfrctl0 = ahc_inb(ahc, SXFRCTL0); 4972 ahc->suspend_state.channel[1].sxfrctl1 = ahc_inb(ahc, SXFRCTL1); 4973 ahc->suspend_state.channel[1].simode0 = ahc_inb(ahc, SIMODE0); 4974 ahc->suspend_state.channel[1].simode1 = ahc_inb(ahc, SIMODE1); 4975 ahc->suspend_state.channel[1].seltimer = ahc_inb(ahc, SELTIMER); 4976 ahc->suspend_state.channel[1].seqctl = ahc_inb(ahc, SEQCTL); 4977 ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) & ~SELBUSB); 4978 } 4979 ahc->suspend_state.channel[0].scsiseq = ahc_inb(ahc, SCSISEQ); 4980 ahc->suspend_state.channel[0].sxfrctl0 = ahc_inb(ahc, SXFRCTL0); 4981 ahc->suspend_state.channel[0].sxfrctl1 = ahc_inb(ahc, SXFRCTL1); 4982 ahc->suspend_state.channel[0].simode0 = ahc_inb(ahc, SIMODE0); 4983 ahc->suspend_state.channel[0].simode1 = ahc_inb(ahc, SIMODE1); 4984 ahc->suspend_state.channel[0].seltimer = ahc_inb(ahc, SELTIMER); 4985 ahc->suspend_state.channel[0].seqctl = ahc_inb(ahc, SEQCTL); 4986 4987 if ((ahc->chip & AHC_PCI) != 0) { 4988 ahc->suspend_state.dscommand0 = ahc_inb(ahc, DSCOMMAND0); 4989 ahc->suspend_state.dspcistatus = ahc_inb(ahc, DSPCISTATUS); 4990 } 4991 4992 if ((ahc->features & AHC_DT) != 0) { 4993 u_int sfunct; 4994 4995 sfunct = ahc_inb(ahc, SFUNCT) & ~ALT_MODE; 4996 ahc_outb(ahc, SFUNCT, sfunct | ALT_MODE); 4997 ahc->suspend_state.optionmode = ahc_inb(ahc, OPTIONMODE); 4998 ahc_outb(ahc, SFUNCT, sfunct); 4999 ahc->suspend_state.crccontrol1 = ahc_inb(ahc, CRCCONTROL1); 5000 } 5001 5002 if ((ahc->features & AHC_MULTI_FUNC) != 0) 5003 ahc->suspend_state.scbbaddr = ahc_inb(ahc, SCBBADDR); 5004 5005 if ((ahc->features & AHC_ULTRA2) != 0) 5006 ahc->suspend_state.dff_thrsh = ahc_inb(ahc, DFF_THRSH); 5007 5008 ptr = ahc->suspend_state.scratch_ram; 5009 for (i = 0; i < 64; i++) 5010 *ptr++ = ahc_inb(ahc, SRAM_BASE + i); 5011 5012 if ((ahc->features & AHC_MORE_SRAM) != 0) { 5013 for (i = 0; i < 16; i++) 5014 *ptr++ = ahc_inb(ahc, TARG_OFFSET + i); 5015 } 5016 5017 ptr = ahc->suspend_state.btt; 5018 if ((ahc->flags & AHC_SCB_BTT) != 0) { 5019 for (i = 0;i < AHC_NUM_TARGETS; i++) { 5020 int j; 5021 5022 for (j = 0;j < AHC_NUM_LUNS; j++) { 5023 u_int tcl; 5024 5025 tcl = BUILD_TCL(i << 4, j); 5026 *ptr = ahc_index_busy_tcl(ahc, tcl); 5027 } 5028 } 5029 } 5030 ahc_shutdown(ahc); 5031 return (0); 5032 } 5033 5034 int 5035 ahc_resume(struct ahc_softc *ahc) 5036 { 5037 uint8_t *ptr; 5038 int i; 5039 5040 ahc_reset(ahc); 5041 5042 ahc_build_free_scb_list(ahc); 5043 5044 /* Restore volatile registers */ 5045 if ((ahc->features & AHC_TWIN) != 0) { 5046 ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) | SELBUSB); 5047 ahc_outb(ahc, SCSIID, ahc->our_id); 5048 ahc_outb(ahc, SCSISEQ, ahc->suspend_state.channel[1].scsiseq); 5049 ahc_outb(ahc, SXFRCTL0, ahc->suspend_state.channel[1].sxfrctl0); 5050 ahc_outb(ahc, SXFRCTL1, ahc->suspend_state.channel[1].sxfrctl1); 5051 ahc_outb(ahc, SIMODE0, ahc->suspend_state.channel[1].simode0); 5052 ahc_outb(ahc, SIMODE1, ahc->suspend_state.channel[1].simode1); 5053 ahc_outb(ahc, SELTIMER, ahc->suspend_state.channel[1].seltimer); 5054 ahc_outb(ahc, SEQCTL, ahc->suspend_state.channel[1].seqctl); 5055 ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) & ~SELBUSB); 5056 } 5057 ahc_outb(ahc, SCSISEQ, ahc->suspend_state.channel[0].scsiseq); 5058 ahc_outb(ahc, SXFRCTL0, ahc->suspend_state.channel[0].sxfrctl0); 5059 ahc_outb(ahc, SXFRCTL1, ahc->suspend_state.channel[0].sxfrctl1); 5060 ahc_outb(ahc, SIMODE0, ahc->suspend_state.channel[0].simode0); 5061 ahc_outb(ahc, SIMODE1, ahc->suspend_state.channel[0].simode1); 5062 ahc_outb(ahc, SELTIMER, ahc->suspend_state.channel[0].seltimer); 5063 ahc_outb(ahc, SEQCTL, ahc->suspend_state.channel[0].seqctl); 5064 if ((ahc->features & AHC_ULTRA2) != 0) 5065 ahc_outb(ahc, SCSIID_ULTRA2, ahc->our_id); 5066 else 5067 ahc_outb(ahc, SCSIID, ahc->our_id); 5068 5069 if ((ahc->chip & AHC_PCI) != 0) { 5070 ahc_outb(ahc, DSCOMMAND0, ahc->suspend_state.dscommand0); 5071 ahc_outb(ahc, DSPCISTATUS, ahc->suspend_state.dspcistatus); 5072 } 5073 5074 if ((ahc->features & AHC_DT) != 0) { 5075 u_int sfunct; 5076 5077 sfunct = ahc_inb(ahc, SFUNCT) & ~ALT_MODE; 5078 ahc_outb(ahc, SFUNCT, sfunct | ALT_MODE); 5079 ahc_outb(ahc, OPTIONMODE, ahc->suspend_state.optionmode); 5080 ahc_outb(ahc, SFUNCT, sfunct); 5081 ahc_outb(ahc, CRCCONTROL1, ahc->suspend_state.crccontrol1); 5082 } 5083 5084 if ((ahc->features & AHC_MULTI_FUNC) != 0) 5085 ahc_outb(ahc, SCBBADDR, ahc->suspend_state.scbbaddr); 5086 5087 if ((ahc->features & AHC_ULTRA2) != 0) 5088 ahc_outb(ahc, DFF_THRSH, ahc->suspend_state.dff_thrsh); 5089 5090 ptr = ahc->suspend_state.scratch_ram; 5091 for (i = 0; i < 64; i++) 5092 ahc_outb(ahc, SRAM_BASE + i, *ptr++); 5093 5094 if ((ahc->features & AHC_MORE_SRAM) != 0) { 5095 for (i = 0; i < 16; i++) 5096 ahc_outb(ahc, TARG_OFFSET + i, *ptr++); 5097 } 5098 5099 ptr = ahc->suspend_state.btt; 5100 if ((ahc->flags & AHC_SCB_BTT) != 0) { 5101 for (i = 0;i < AHC_NUM_TARGETS; i++) { 5102 int j; 5103 5104 for (j = 0;j < AHC_NUM_LUNS; j++) { 5105 u_int tcl; 5106 5107 tcl = BUILD_TCL(i << 4, j); 5108 ahc_busy_tcl(ahc, tcl, *ptr); 5109 } 5110 } 5111 } 5112 return (0); 5113 } 5114 5115 /************************** Busy Target Table *********************************/ 5116 /* 5117 * Return the untagged transaction id for a given target/channel lun. 5118 * Optionally, clear the entry. 5119 */ 5120 u_int 5121 ahc_index_busy_tcl(struct ahc_softc *ahc, u_int tcl) 5122 { 5123 u_int scbid; 5124 u_int target_offset; 5125 5126 if ((ahc->flags & AHC_SCB_BTT) != 0) { 5127 u_int saved_scbptr; 5128 5129 saved_scbptr = ahc_inb(ahc, SCBPTR); 5130 ahc_outb(ahc, SCBPTR, TCL_LUN(tcl)); 5131 scbid = ahc_inb(ahc, SCB_64_BTT + TCL_TARGET_OFFSET(tcl)); 5132 ahc_outb(ahc, SCBPTR, saved_scbptr); 5133 } else { 5134 target_offset = TCL_TARGET_OFFSET(tcl); 5135 scbid = ahc_inb(ahc, BUSY_TARGETS + target_offset); 5136 } 5137 5138 return (scbid); 5139 } 5140 5141 void 5142 ahc_unbusy_tcl(struct ahc_softc *ahc, u_int tcl) 5143 { 5144 u_int target_offset; 5145 5146 if ((ahc->flags & AHC_SCB_BTT) != 0) { 5147 u_int saved_scbptr; 5148 5149 saved_scbptr = ahc_inb(ahc, SCBPTR); 5150 ahc_outb(ahc, SCBPTR, TCL_LUN(tcl)); 5151 ahc_outb(ahc, SCB_64_BTT+TCL_TARGET_OFFSET(tcl), SCB_LIST_NULL); 5152 ahc_outb(ahc, SCBPTR, saved_scbptr); 5153 } else { 5154 target_offset = TCL_TARGET_OFFSET(tcl); 5155 ahc_outb(ahc, BUSY_TARGETS + target_offset, SCB_LIST_NULL); 5156 } 5157 } 5158 5159 void 5160 ahc_busy_tcl(struct ahc_softc *ahc, u_int tcl, u_int scbid) 5161 { 5162 u_int target_offset; 5163 5164 if ((ahc->flags & AHC_SCB_BTT) != 0) { 5165 u_int saved_scbptr; 5166 5167 saved_scbptr = ahc_inb(ahc, SCBPTR); 5168 ahc_outb(ahc, SCBPTR, TCL_LUN(tcl)); 5169 ahc_outb(ahc, SCB_64_BTT + TCL_TARGET_OFFSET(tcl), scbid); 5170 ahc_outb(ahc, SCBPTR, saved_scbptr); 5171 } else { 5172 target_offset = TCL_TARGET_OFFSET(tcl); 5173 ahc_outb(ahc, BUSY_TARGETS + target_offset, scbid); 5174 } 5175 } 5176 5177 /************************** SCB and SCB queue management **********************/ 5178 int 5179 ahc_match_scb(struct ahc_softc *ahc, struct scb *scb, int target, 5180 char channel, int lun, u_int tag, role_t role) 5181 { 5182 int targ = SCB_GET_TARGET(ahc, scb); 5183 char chan = SCB_GET_CHANNEL(ahc, scb); 5184 int slun = SCB_GET_LUN(scb); 5185 int match; 5186 5187 match = ((chan == channel) || (channel == ALL_CHANNELS)); 5188 if (match != 0) 5189 match = ((targ == target) || (target == CAM_TARGET_WILDCARD)); 5190 if (match != 0) 5191 match = ((lun == slun) || (lun == CAM_LUN_WILDCARD)); 5192 if (match != 0) { 5193 #if 0 5194 #if AHC_TARGET_MODE 5195 int group; 5196 5197 group = XPT_FC_GROUP(scb->io_ctx->ccb_h.func_code); 5198 if (role == ROLE_INITIATOR) { 5199 match = (group != XPT_FC_GROUP_TMODE) 5200 && ((tag == scb->hscb->tag) 5201 || (tag == SCB_LIST_NULL)); 5202 } else if (role == ROLE_TARGET) { 5203 match = (group == XPT_FC_GROUP_TMODE) 5204 && ((tag == scb->io_ctx->csio.tag_id) 5205 || (tag == SCB_LIST_NULL)); 5206 } 5207 #else /* !AHC_TARGET_MODE */ 5208 match = ((tag == scb->hscb->tag) || (tag == SCB_LIST_NULL)); 5209 #endif /* AHC_TARGET_MODE */ 5210 #endif 5211 } 5212 5213 return match; 5214 } 5215 5216 void 5217 ahc_freeze_devq(struct ahc_softc *ahc, struct scb *scb) 5218 { 5219 int target; 5220 char channel; 5221 int lun; 5222 5223 target = SCB_GET_TARGET(ahc, scb); 5224 lun = SCB_GET_LUN(scb); 5225 channel = SCB_GET_CHANNEL(ahc, scb); 5226 5227 ahc_search_qinfifo(ahc, target, channel, lun, 5228 /*tag*/SCB_LIST_NULL, ROLE_UNKNOWN, 5229 CAM_REQUEUE_REQ, SEARCH_COMPLETE); 5230 5231 ahc_platform_freeze_devq(ahc, scb); 5232 } 5233 5234 void 5235 ahc_qinfifo_requeue_tail(struct ahc_softc *ahc, struct scb *scb) 5236 { 5237 struct scb *prev_scb; 5238 5239 prev_scb = NULL; 5240 if (ahc_qinfifo_count(ahc) != 0) { 5241 u_int prev_tag; 5242 uint8_t prev_pos; 5243 5244 prev_pos = ahc->qinfifonext - 1; 5245 prev_tag = ahc->qinfifo[prev_pos]; 5246 prev_scb = ahc_lookup_scb(ahc, prev_tag); 5247 } 5248 ahc_qinfifo_requeue(ahc, prev_scb, scb); 5249 if ((ahc->features & AHC_QUEUE_REGS) != 0) { 5250 ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext); 5251 } else { 5252 ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext); 5253 } 5254 } 5255 5256 static void 5257 ahc_qinfifo_requeue(struct ahc_softc *ahc, struct scb *prev_scb, 5258 struct scb *scb) 5259 { 5260 if (prev_scb == NULL) { 5261 ahc_outb(ahc, NEXT_QUEUED_SCB, scb->hscb->tag); 5262 } else { 5263 prev_scb->hscb->next = scb->hscb->tag; 5264 ahc_sync_scb(ahc, prev_scb, 5265 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 5266 } 5267 ahc->qinfifo[ahc->qinfifonext++] = scb->hscb->tag; 5268 scb->hscb->next = ahc->next_queued_scb->hscb->tag; 5269 ahc_sync_scb(ahc, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 5270 } 5271 5272 static int 5273 ahc_qinfifo_count(struct ahc_softc *ahc) 5274 { 5275 uint8_t qinpos; 5276 uint8_t diff; 5277 5278 if ((ahc->features & AHC_QUEUE_REGS) != 0) { 5279 qinpos = ahc_inb(ahc, SNSCB_QOFF); 5280 ahc_outb(ahc, SNSCB_QOFF, qinpos); 5281 } else 5282 qinpos = ahc_inb(ahc, QINPOS); 5283 diff = ahc->qinfifonext - qinpos; 5284 return (diff); 5285 } 5286 5287 int 5288 ahc_search_qinfifo(struct ahc_softc *ahc, int target, char channel, 5289 int lun, u_int tag, role_t role, uint32_t status, 5290 ahc_search_action action) 5291 { 5292 struct scb *scb; 5293 struct scb *prev_scb; 5294 uint8_t qinstart; 5295 uint8_t qinpos; 5296 uint8_t qintail; 5297 uint8_t next; 5298 uint8_t prev; 5299 uint8_t curscbptr; 5300 int found; 5301 int have_qregs; 5302 5303 qintail = ahc->qinfifonext; 5304 have_qregs = (ahc->features & AHC_QUEUE_REGS) != 0; 5305 if (have_qregs) { 5306 qinstart = ahc_inb(ahc, SNSCB_QOFF); 5307 ahc_outb(ahc, SNSCB_QOFF, qinstart); 5308 } else 5309 qinstart = ahc_inb(ahc, QINPOS); 5310 qinpos = qinstart; 5311 found = 0; 5312 prev_scb = NULL; 5313 5314 if (action == SEARCH_COMPLETE) { 5315 /* 5316 * Don't attempt to run any queued untagged transactions 5317 * until we are done with the abort process. 5318 */ 5319 ahc_freeze_untagged_queues(ahc); 5320 } 5321 5322 /* 5323 * Start with an empty queue. Entries that are not chosen 5324 * for removal will be re-added to the queue as we go. 5325 */ 5326 ahc->qinfifonext = qinpos; 5327 ahc_outb(ahc, NEXT_QUEUED_SCB, ahc->next_queued_scb->hscb->tag); 5328 5329 while (qinpos != qintail) { 5330 scb = ahc_lookup_scb(ahc, ahc->qinfifo[qinpos]); 5331 if (scb == NULL) { 5332 printf("qinpos = %d, SCB index = %d\n", 5333 qinpos, ahc->qinfifo[qinpos]); 5334 panic("Loop 1\n"); 5335 } 5336 5337 if (ahc_match_scb(ahc, scb, target, channel, lun, tag, role)) { 5338 /* 5339 * We found an scb that needs to be acted on. 5340 */ 5341 found++; 5342 switch (action) { 5343 case SEARCH_COMPLETE: 5344 { 5345 cam_status ostat; 5346 cam_status cstat; 5347 5348 ostat = ahc_get_transaction_status(scb); 5349 if (ostat == CAM_REQ_INPROG) 5350 ahc_set_transaction_status(scb, status); 5351 cstat = ahc_get_transaction_status(scb); 5352 if (cstat != CAM_REQ_CMP) 5353 ahc_freeze_scb(scb); 5354 if ((scb->flags & SCB_ACTIVE) == 0) 5355 printf("Inactive SCB in qinfifo\n"); 5356 ahc_done(ahc, scb); 5357 5358 /* FALLTHROUGH */ 5359 } 5360 case SEARCH_REMOVE: 5361 break; 5362 case SEARCH_COUNT: 5363 ahc_qinfifo_requeue(ahc, prev_scb, scb); 5364 prev_scb = scb; 5365 break; 5366 } 5367 } else { 5368 ahc_qinfifo_requeue(ahc, prev_scb, scb); 5369 prev_scb = scb; 5370 } 5371 qinpos++; 5372 } 5373 5374 if ((ahc->features & AHC_QUEUE_REGS) != 0) { 5375 ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext); 5376 } else { 5377 ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext); 5378 } 5379 5380 if (action != SEARCH_COUNT 5381 && (found != 0) 5382 && (qinstart != ahc->qinfifonext)) { 5383 /* 5384 * The sequencer may be in the process of DMA'ing 5385 * down the SCB at the beginning of the queue. 5386 * This could be problematic if either the first, 5387 * or the second SCB is removed from the queue 5388 * (the first SCB includes a pointer to the "next" 5389 * SCB to DMA). If we have removed any entries, swap 5390 * the first element in the queue with the next HSCB 5391 * so the sequencer will notice that NEXT_QUEUED_SCB 5392 * has changed during its DMA attempt and will retry 5393 * the DMA. 5394 */ 5395 scb = ahc_lookup_scb(ahc, ahc->qinfifo[qinstart]); 5396 5397 if (scb == NULL) { 5398 printf("found = %d, qinstart = %d, qinfifionext = %d\n", 5399 found, qinstart, ahc->qinfifonext); 5400 panic("First/Second Qinfifo fixup\n"); 5401 } 5402 /* 5403 * ahc_swap_with_next_hscb forces our next pointer to 5404 * point to the reserved SCB for future commands. Save 5405 * and restore our original next pointer to maintain 5406 * queue integrity. 5407 */ 5408 next = scb->hscb->next; 5409 ahc->scb_data->scbindex[scb->hscb->tag] = NULL; 5410 ahc_swap_with_next_hscb(ahc, scb); 5411 scb->hscb->next = next; 5412 ahc->qinfifo[qinstart] = scb->hscb->tag; 5413 5414 /* Tell the card about the new head of the qinfifo. */ 5415 ahc_outb(ahc, NEXT_QUEUED_SCB, scb->hscb->tag); 5416 5417 /* Fixup the tail "next" pointer. */ 5418 qintail = ahc->qinfifonext - 1; 5419 scb = ahc_lookup_scb(ahc, ahc->qinfifo[qintail]); 5420 scb->hscb->next = ahc->next_queued_scb->hscb->tag; 5421 } 5422 5423 /* 5424 * Search waiting for selection list. 5425 */ 5426 curscbptr = ahc_inb(ahc, SCBPTR); 5427 next = ahc_inb(ahc, WAITING_SCBH); /* Start at head of list. */ 5428 prev = SCB_LIST_NULL; 5429 5430 while (next != SCB_LIST_NULL) { 5431 uint8_t scb_index; 5432 5433 ahc_outb(ahc, SCBPTR, next); 5434 scb_index = ahc_inb(ahc, SCB_TAG); 5435 if (scb_index >= ahc->scb_data->numscbs) { 5436 printf("Waiting List inconsistency. " 5437 "SCB index == %d, yet numscbs == %d.", 5438 scb_index, ahc->scb_data->numscbs); 5439 ahc_dump_card_state(ahc); 5440 panic("for safety"); 5441 } 5442 scb = ahc_lookup_scb(ahc, scb_index); 5443 if (scb == NULL) { 5444 printf("scb_index = %d, next = %d\n", 5445 scb_index, next); 5446 panic("Waiting List traversal\n"); 5447 } 5448 if (ahc_match_scb(ahc, scb, target, channel, 5449 lun, SCB_LIST_NULL, role)) { 5450 /* 5451 * We found an scb that needs to be acted on. 5452 */ 5453 found++; 5454 switch (action) { 5455 case SEARCH_COMPLETE: 5456 { 5457 cam_status ostat; 5458 cam_status cstat; 5459 5460 ostat = ahc_get_transaction_status(scb); 5461 if (ostat == CAM_REQ_INPROG) 5462 ahc_set_transaction_status(scb, status); 5463 cstat = ahc_get_transaction_status(scb); 5464 if (cstat != CAM_REQ_CMP) 5465 ahc_freeze_scb(scb); 5466 if ((scb->flags & SCB_ACTIVE) == 0) 5467 printf("Inactive SCB in " 5468 "Waiting List\n"); 5469 ahc_done(ahc, scb); 5470 } 5471 /* FALLTHROUGH */ 5472 case SEARCH_REMOVE: 5473 next = ahc_rem_wscb(ahc, next, prev); 5474 break; 5475 case SEARCH_COUNT: 5476 prev = next; 5477 next = ahc_inb(ahc, SCB_NEXT); 5478 break; 5479 } 5480 } else { 5481 5482 prev = next; 5483 next = ahc_inb(ahc, SCB_NEXT); 5484 } 5485 } 5486 ahc_outb(ahc, SCBPTR, curscbptr); 5487 5488 found += ahc_search_untagged_queues(ahc, /*ahc_io_ctx_t*/NULL, target, 5489 channel, lun, status, action); 5490 5491 if (action == SEARCH_COMPLETE) 5492 ahc_release_untagged_queues(ahc); 5493 return (found); 5494 } 5495 5496 int 5497 ahc_search_untagged_queues(struct ahc_softc *ahc, 5498 struct scsipi_xfer *xs, int target, char channel, int lun, 5499 uint32_t status, ahc_search_action action) 5500 { 5501 struct scb *scb; 5502 int maxtarget; 5503 int found; 5504 int i; 5505 5506 if (action == SEARCH_COMPLETE) { 5507 /* 5508 * Don't attempt to run any queued untagged transactions 5509 * until we are done with the abort process. 5510 */ 5511 ahc_freeze_untagged_queues(ahc); 5512 } 5513 5514 found = 0; 5515 i = 0; 5516 if ((ahc->flags & AHC_SCB_BTT) == 0) { 5517 5518 maxtarget = 16; 5519 if (target != CAM_TARGET_WILDCARD) { 5520 5521 i = target; 5522 if (channel == 'B') 5523 i += 8; 5524 maxtarget = i + 1; 5525 } 5526 } else { 5527 maxtarget = 0; 5528 } 5529 5530 for (; i < maxtarget; i++) { 5531 struct scb_tailq *untagged_q; 5532 struct scb *next_scb; 5533 5534 untagged_q = &(ahc->untagged_queues[i]); 5535 next_scb = TAILQ_FIRST(untagged_q); 5536 while (next_scb != NULL) { 5537 5538 scb = next_scb; 5539 next_scb = TAILQ_NEXT(scb, links.tqe); 5540 5541 /* 5542 * The head of the list may be the currently 5543 * active untagged command for a device. 5544 * We're only searching for commands that 5545 * have not been started. A transaction 5546 * marked active but still in the qinfifo 5547 * is removed by the qinfifo scanning code 5548 * above. 5549 */ 5550 if ((scb->flags & SCB_ACTIVE) != 0) 5551 continue; 5552 5553 if (ahc_match_scb(ahc, scb, target, channel, lun, 5554 SCB_LIST_NULL, ROLE_INITIATOR) == 0 5555 /*|| (ctx != NULL && ctx != scb->io_ctx)*/) 5556 continue; 5557 5558 /* 5559 * We found an scb that needs to be acted on. 5560 */ 5561 found++; 5562 switch (action) { 5563 case SEARCH_COMPLETE: 5564 { 5565 cam_status ostat; 5566 cam_status cstat; 5567 5568 ostat = ahc_get_transaction_status(scb); 5569 if (ostat == CAM_REQ_INPROG) 5570 ahc_set_transaction_status(scb, status); 5571 cstat = ahc_get_transaction_status(scb); 5572 if (cstat != CAM_REQ_CMP) 5573 ahc_freeze_scb(scb); 5574 if ((scb->flags & SCB_ACTIVE) == 0) 5575 printf("Inactive SCB in untaggedQ\n"); 5576 ahc_done(ahc, scb); 5577 break; 5578 } 5579 case SEARCH_REMOVE: 5580 scb->flags &= ~SCB_UNTAGGEDQ; 5581 TAILQ_REMOVE(untagged_q, scb, links.tqe); 5582 break; 5583 case SEARCH_COUNT: 5584 break; 5585 } 5586 } 5587 } 5588 5589 if (action == SEARCH_COMPLETE) 5590 ahc_release_untagged_queues(ahc); 5591 return (found); 5592 } 5593 5594 int 5595 ahc_search_disc_list(struct ahc_softc *ahc, int target, char channel, 5596 int lun, u_int tag, int stop_on_first, int remove, 5597 int save_state) 5598 { 5599 struct scb *scbp; 5600 u_int next; 5601 u_int prev; 5602 u_int count; 5603 u_int active_scb; 5604 5605 count = 0; 5606 next = ahc_inb(ahc, DISCONNECTED_SCBH); 5607 prev = SCB_LIST_NULL; 5608 5609 if (save_state) { 5610 /* restore this when we're done */ 5611 active_scb = ahc_inb(ahc, SCBPTR); 5612 } else 5613 /* Silence compiler */ 5614 active_scb = SCB_LIST_NULL; 5615 5616 while (next != SCB_LIST_NULL) { 5617 u_int scb_index; 5618 5619 ahc_outb(ahc, SCBPTR, next); 5620 scb_index = ahc_inb(ahc, SCB_TAG); 5621 if (scb_index >= ahc->scb_data->numscbs) { 5622 printf("Disconnected List inconsistency. " 5623 "SCB index == %d, yet numscbs == %d.", 5624 scb_index, ahc->scb_data->numscbs); 5625 ahc_dump_card_state(ahc); 5626 panic("for safety"); 5627 } 5628 5629 if (next == prev) { 5630 panic("Disconnected List Loop. " 5631 "cur SCBPTR == %x, prev SCBPTR == %x.", 5632 next, prev); 5633 } 5634 scbp = ahc_lookup_scb(ahc, scb_index); 5635 if (ahc_match_scb(ahc, scbp, target, channel, lun, 5636 tag, ROLE_INITIATOR)) { 5637 count++; 5638 if (remove) { 5639 next = 5640 ahc_rem_scb_from_disc_list(ahc, prev, next); 5641 } else { 5642 prev = next; 5643 next = ahc_inb(ahc, SCB_NEXT); 5644 } 5645 if (stop_on_first) 5646 break; 5647 } else { 5648 prev = next; 5649 next = ahc_inb(ahc, SCB_NEXT); 5650 } 5651 } 5652 if (save_state) 5653 ahc_outb(ahc, SCBPTR, active_scb); 5654 return (count); 5655 } 5656 5657 /* 5658 * Remove an SCB from the on chip list of disconnected transactions. 5659 * This is empty/unused if we are not performing SCB paging. 5660 */ 5661 static u_int 5662 ahc_rem_scb_from_disc_list(struct ahc_softc *ahc, u_int prev, u_int scbptr) 5663 { 5664 u_int next; 5665 5666 ahc_outb(ahc, SCBPTR, scbptr); 5667 next = ahc_inb(ahc, SCB_NEXT); 5668 5669 ahc_outb(ahc, SCB_CONTROL, 0); 5670 5671 ahc_add_curscb_to_free_list(ahc); 5672 5673 if (prev != SCB_LIST_NULL) { 5674 ahc_outb(ahc, SCBPTR, prev); 5675 ahc_outb(ahc, SCB_NEXT, next); 5676 } else 5677 ahc_outb(ahc, DISCONNECTED_SCBH, next); 5678 5679 return (next); 5680 } 5681 5682 /* 5683 * Add the SCB as selected by SCBPTR onto the on chip list of 5684 * free hardware SCBs. This list is empty/unused if we are not 5685 * performing SCB paging. 5686 */ 5687 static void 5688 ahc_add_curscb_to_free_list(struct ahc_softc *ahc) 5689 { 5690 /* 5691 * Invalidate the tag so that our abort 5692 * routines don't think it's active. 5693 */ 5694 ahc_outb(ahc, SCB_TAG, SCB_LIST_NULL); 5695 5696 if ((ahc->flags & AHC_PAGESCBS) != 0) { 5697 ahc_outb(ahc, SCB_NEXT, ahc_inb(ahc, FREE_SCBH)); 5698 ahc_outb(ahc, FREE_SCBH, ahc_inb(ahc, SCBPTR)); 5699 } 5700 } 5701 5702 /* 5703 * Manipulate the waiting for selection list and return the 5704 * scb that follows the one that we remove. 5705 */ 5706 static u_int 5707 ahc_rem_wscb(struct ahc_softc *ahc, u_int scbpos, u_int prev) 5708 { 5709 u_int curscb, next; 5710 5711 /* 5712 * Select the SCB we want to abort and 5713 * pull the next pointer out of it. 5714 */ 5715 curscb = ahc_inb(ahc, SCBPTR); 5716 ahc_outb(ahc, SCBPTR, scbpos); 5717 next = ahc_inb(ahc, SCB_NEXT); 5718 5719 /* Clear the necessary fields */ 5720 ahc_outb(ahc, SCB_CONTROL, 0); 5721 5722 ahc_add_curscb_to_free_list(ahc); 5723 5724 /* update the waiting list */ 5725 if (prev == SCB_LIST_NULL) { 5726 /* First in the list */ 5727 ahc_outb(ahc, WAITING_SCBH, next); 5728 5729 /* 5730 * Ensure we aren't attempting to perform 5731 * selection for this entry. 5732 */ 5733 ahc_outb(ahc, SCSISEQ, (ahc_inb(ahc, SCSISEQ) & ~ENSELO)); 5734 } else { 5735 /* 5736 * Select the scb that pointed to us 5737 * and update its next pointer. 5738 */ 5739 ahc_outb(ahc, SCBPTR, prev); 5740 ahc_outb(ahc, SCB_NEXT, next); 5741 } 5742 5743 /* 5744 * Point us back at the original scb position. 5745 */ 5746 ahc_outb(ahc, SCBPTR, curscb); 5747 return next; 5748 } 5749 5750 /******************************** Error Handling ******************************/ 5751 /* 5752 * Abort all SCBs that match the given description (target/channel/lun/tag), 5753 * setting their status to the passed in status if the status has not already 5754 * been modified from CAM_REQ_INPROG. This routine assumes that the sequencer 5755 * is paused before it is called. 5756 */ 5757 int 5758 ahc_abort_scbs(struct ahc_softc *ahc, int target, char channel, 5759 int lun, u_int tag, role_t role, uint32_t status) 5760 { 5761 struct scb *scbp; 5762 struct scb *scbp_next; 5763 u_int active_scb; 5764 int i, j; 5765 int maxtarget; 5766 int minlun; 5767 int maxlun; 5768 5769 int found; 5770 5771 /* 5772 * Don't attempt to run any queued untagged transactions 5773 * until we are done with the abort process. 5774 */ 5775 ahc_freeze_untagged_queues(ahc); 5776 5777 /* restore this when we're done */ 5778 active_scb = ahc_inb(ahc, SCBPTR); 5779 5780 found = ahc_search_qinfifo(ahc, target, channel, lun, SCB_LIST_NULL, 5781 role, CAM_REQUEUE_REQ, SEARCH_COMPLETE); 5782 5783 /* 5784 * Clean out the busy target table for any untagged commands. 5785 */ 5786 i = 0; 5787 maxtarget = 16; 5788 if (target != CAM_TARGET_WILDCARD) { 5789 i = target; 5790 if (channel == 'B') 5791 i += 8; 5792 maxtarget = i + 1; 5793 } 5794 5795 if (lun == CAM_LUN_WILDCARD) { 5796 5797 /* 5798 * Unless we are using an SCB based 5799 * busy targets table, there is only 5800 * one table entry for all luns of 5801 * a target. 5802 */ 5803 minlun = 0; 5804 maxlun = 1; 5805 if ((ahc->flags & AHC_SCB_BTT) != 0) 5806 maxlun = AHC_NUM_LUNS; 5807 } else { 5808 minlun = lun; 5809 maxlun = lun + 1; 5810 } 5811 5812 if (role != ROLE_TARGET) { 5813 for (;i < maxtarget; i++) { 5814 for (j = minlun;j < maxlun; j++) { 5815 u_int scbid; 5816 u_int tcl; 5817 5818 tcl = BUILD_TCL(i << 4, j); 5819 scbid = ahc_index_busy_tcl(ahc, tcl); 5820 scbp = ahc_lookup_scb(ahc, scbid); 5821 if (scbp == NULL 5822 || ahc_match_scb(ahc, scbp, target, channel, 5823 lun, tag, role) == 0) 5824 continue; 5825 ahc_unbusy_tcl(ahc, BUILD_TCL(i << 4, j)); 5826 } 5827 } 5828 5829 /* 5830 * Go through the disconnected list and remove any entries we 5831 * have queued for completion, 0'ing their control byte too. 5832 * We save the active SCB and restore it ourselves, so there 5833 * is no reason for this search to restore it too. 5834 */ 5835 ahc_search_disc_list(ahc, target, channel, lun, tag, 5836 /*stop_on_first*/FALSE, /*remove*/TRUE, 5837 /*save_state*/FALSE); 5838 } 5839 5840 /* 5841 * Go through the hardware SCB array looking for commands that 5842 * were active but not on any list. In some cases, these remnants 5843 * might not still have mappings in the scbindex array (e.g. unexpected 5844 * bus free with the same scb queued for an abort). Don't hold this 5845 * against them. 5846 */ 5847 for (i = 0; i < ahc->scb_data->maxhscbs; i++) { 5848 u_int scbid; 5849 5850 ahc_outb(ahc, SCBPTR, i); 5851 scbid = ahc_inb(ahc, SCB_TAG); 5852 scbp = ahc_lookup_scb(ahc, scbid); 5853 if ((scbp == NULL && scbid != SCB_LIST_NULL) 5854 || (scbp != NULL 5855 && ahc_match_scb(ahc, scbp, target, channel, lun, tag, role))) 5856 ahc_add_curscb_to_free_list(ahc); 5857 } 5858 5859 /* 5860 * Go through the pending CCB list and look for 5861 * commands for this target that are still active. 5862 * These are other tagged commands that were 5863 * disconnected when the reset occurred. 5864 */ 5865 scbp_next = LIST_FIRST(&ahc->pending_scbs); 5866 while (scbp_next != NULL) { 5867 scbp = scbp_next; 5868 scbp_next = LIST_NEXT(scbp, pending_links); 5869 if (ahc_match_scb(ahc, scbp, target, channel, lun, tag, role)) { 5870 cam_status ostat; 5871 5872 ostat = ahc_get_transaction_status(scbp); 5873 if (ostat == CAM_REQ_INPROG) 5874 ahc_set_transaction_status(scbp, status); 5875 if (ahc_get_transaction_status(scbp) != CAM_REQ_CMP) 5876 ahc_freeze_scb(scbp); 5877 if ((scbp->flags & SCB_ACTIVE) == 0) 5878 printf("Inactive SCB on pending list\n"); 5879 ahc_done(ahc, scbp); 5880 found++; 5881 } 5882 } 5883 ahc_outb(ahc, SCBPTR, active_scb); 5884 ahc_platform_abort_scbs(ahc, target, channel, lun, tag, role, status); 5885 ahc_release_untagged_queues(ahc); 5886 return found; 5887 } 5888 5889 static void 5890 ahc_reset_current_bus(struct ahc_softc *ahc) 5891 { 5892 uint8_t scsiseq; 5893 5894 ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENSCSIRST); 5895 scsiseq = ahc_inb(ahc, SCSISEQ); 5896 ahc_outb(ahc, SCSISEQ, scsiseq | SCSIRSTO); 5897 ahc_flush_device_writes(ahc); 5898 ahc_delay(AHC_BUSRESET_DELAY); 5899 /* Turn off the bus reset */ 5900 ahc_outb(ahc, SCSISEQ, scsiseq & ~SCSIRSTO); 5901 5902 ahc_clear_intstat(ahc); 5903 5904 /* Re-enable reset interrupts */ 5905 ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) | ENSCSIRST); 5906 } 5907 5908 int 5909 ahc_reset_channel(struct ahc_softc *ahc, char channel, int initiate_reset) 5910 { 5911 struct ahc_devinfo dinfo; 5912 u_int initiator, target, max_scsiid; 5913 u_int sblkctl; 5914 u_int scsiseq; 5915 u_int simode1; 5916 int found; 5917 int restart_needed; 5918 char cur_channel; 5919 5920 ahc->pending_device = NULL; 5921 5922 ahc_compile_devinfo(&dinfo, 5923 CAM_TARGET_WILDCARD, 5924 CAM_TARGET_WILDCARD, 5925 CAM_LUN_WILDCARD, 5926 channel, ROLE_UNKNOWN); 5927 ahc_pause(ahc); 5928 5929 /* Make sure the sequencer is in a safe location. */ 5930 ahc_clear_critical_section(ahc); 5931 5932 /* 5933 * Run our command complete fifos to ensure that we perform 5934 * completion processing on any commands that 'completed' 5935 * before the reset occurred. 5936 */ 5937 ahc_run_qoutfifo(ahc); 5938 #if AHC_TARGET_MODE 5939 /* 5940 * XXX - In Twin mode, the tqinfifo may have commands 5941 * for an unaffected channel in it. However, if 5942 * we have run out of ATIO resources to drain that 5943 * queue, we may not get them all out here. Further, 5944 * the blocked transactions for the reset channel 5945 * should just be killed off, irrespective of whether 5946 * we are blocked on ATIO resources. Write a routine 5947 * to compact the tqinfifo appropriately. 5948 */ 5949 if ((ahc->flags & AHC_TARGETROLE) != 0) { 5950 ahc_run_tqinfifo(ahc, /*paused*/TRUE); 5951 } 5952 #endif 5953 5954 /* 5955 * Reset the bus if we are initiating this reset 5956 */ 5957 sblkctl = ahc_inb(ahc, SBLKCTL); 5958 cur_channel = 'A'; 5959 if ((ahc->features & AHC_TWIN) != 0 5960 && ((sblkctl & SELBUSB) != 0)) 5961 cur_channel = 'B'; 5962 scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE); 5963 if (cur_channel != channel) { 5964 /* Case 1: Command for another bus is active 5965 * Stealthily reset the other bus without 5966 * upsetting the current bus. 5967 */ 5968 ahc_outb(ahc, SBLKCTL, sblkctl ^ SELBUSB); 5969 simode1 = ahc_inb(ahc, SIMODE1) & ~(ENBUSFREE|ENSCSIRST); 5970 #if AHC_TARGET_MODE 5971 /* 5972 * Bus resets clear ENSELI, so we cannot 5973 * defer re-enabling bus reset interrupts 5974 * if we are in target mode. 5975 */ 5976 if ((ahc->flags & AHC_TARGETROLE) != 0) 5977 simode1 |= ENSCSIRST; 5978 #endif 5979 ahc_outb(ahc, SIMODE1, simode1); 5980 if (initiate_reset) 5981 ahc_reset_current_bus(ahc); 5982 ahc_clear_intstat(ahc); 5983 ahc_outb(ahc, SCSISEQ, scsiseq & (ENSELI|ENRSELI|ENAUTOATNP)); 5984 ahc_outb(ahc, SBLKCTL, sblkctl); 5985 restart_needed = FALSE; 5986 } else { 5987 /* Case 2: A command from this bus is active or we're idle */ 5988 simode1 = ahc_inb(ahc, SIMODE1) & ~(ENBUSFREE|ENSCSIRST); 5989 #if AHC_TARGET_MODE 5990 /* 5991 * Bus resets clear ENSELI, so we cannot 5992 * defer re-enabling bus reset interrupts 5993 * if we are in target mode. 5994 */ 5995 if ((ahc->flags & AHC_TARGETROLE) != 0) 5996 simode1 |= ENSCSIRST; 5997 #endif 5998 ahc_outb(ahc, SIMODE1, simode1); 5999 if (initiate_reset) 6000 ahc_reset_current_bus(ahc); 6001 ahc_clear_intstat(ahc); 6002 ahc_outb(ahc, SCSISEQ, scsiseq & (ENSELI|ENRSELI|ENAUTOATNP)); 6003 restart_needed = TRUE; 6004 } 6005 6006 /* 6007 * Clean up all the state information for the 6008 * pending transactions on this bus. 6009 */ 6010 found = ahc_abort_scbs(ahc, CAM_TARGET_WILDCARD, channel, 6011 CAM_LUN_WILDCARD, SCB_LIST_NULL, 6012 ROLE_UNKNOWN, CAM_SCSI_BUS_RESET); 6013 6014 max_scsiid = (ahc->features & AHC_WIDE) ? 15 : 7; 6015 6016 #ifdef AHC_TARGET_MODE 6017 /* 6018 * Send an immediate notify ccb to all target more peripheral 6019 * drivers affected by this action. 6020 */ 6021 for (target = 0; target <= max_scsiid; target++) { 6022 struct ahc_tmode_tstate* tstate; 6023 u_int lun; 6024 6025 tstate = ahc->enabled_targets[target]; 6026 if (tstate == NULL) 6027 continue; 6028 for (lun = 0; lun < AHC_NUM_LUNS; lun++) { 6029 struct ahc_tmode_lstate* lstate; 6030 6031 lstate = tstate->enabled_luns[lun]; 6032 if (lstate == NULL) 6033 continue; 6034 6035 ahc_queue_lstate_event(ahc, lstate, CAM_TARGET_WILDCARD, 6036 EVENT_TYPE_BUS_RESET, /*arg*/0); 6037 ahc_send_lstate_events(ahc, lstate); 6038 } 6039 } 6040 #endif 6041 /* 6042 * Revert to async/narrow transfers until we renegotiate. 6043 */ 6044 for (target = 0; target <= max_scsiid; target++) { 6045 6046 if (ahc->enabled_targets[target] == NULL) 6047 continue; 6048 for (initiator = 0; initiator <= max_scsiid; initiator++) { 6049 struct ahc_devinfo devinfo; 6050 6051 ahc_compile_devinfo(&devinfo, target, initiator, 6052 CAM_LUN_WILDCARD, 6053 channel, ROLE_UNKNOWN); 6054 ahc_set_width(ahc, &devinfo, MSG_EXT_WDTR_BUS_8_BIT, 6055 AHC_TRANS_CUR, /*paused*/TRUE); 6056 ahc_set_syncrate(ahc, &devinfo, /*syncrate*/NULL, 6057 /*period*/0, /*offset*/0, 6058 /*ppr_options*/0, AHC_TRANS_CUR, 6059 /*paused*/TRUE); 6060 } 6061 } 6062 6063 if (restart_needed) 6064 ahc_restart(ahc); 6065 else 6066 ahc_unpause(ahc); 6067 return found; 6068 } 6069 6070 6071 /***************************** Residual Processing ****************************/ 6072 /* 6073 * Calculate the residual for a just completed SCB. 6074 */ 6075 void 6076 ahc_calc_residual(struct ahc_softc *ahc, struct scb *scb) 6077 { 6078 struct hardware_scb *hscb; 6079 struct status_pkt *spkt; 6080 uint32_t sgptr; 6081 uint32_t resid_sgptr; 6082 uint32_t resid; 6083 6084 /* 6085 * 5 cases. 6086 * 1) No residual. 6087 * SG_RESID_VALID clear in sgptr. 6088 * 2) Transferless command 6089 * 3) Never performed any transfers. 6090 * sgptr has SG_FULL_RESID set. 6091 * 4) No residual but target did not 6092 * save data pointers after the 6093 * last transfer, so sgptr was 6094 * never updated. 6095 * 5) We have a partial residual. 6096 * Use residual_sgptr to determine 6097 * where we are. 6098 */ 6099 6100 hscb = scb->hscb; 6101 sgptr = ahc_le32toh(hscb->sgptr); 6102 if ((sgptr & SG_RESID_VALID) == 0) 6103 /* Case 1 */ 6104 return; 6105 sgptr &= ~SG_RESID_VALID; 6106 6107 if ((sgptr & SG_LIST_NULL) != 0) 6108 /* Case 2 */ 6109 return; 6110 6111 spkt = &hscb->shared_data.status; 6112 resid_sgptr = ahc_le32toh(spkt->residual_sg_ptr); 6113 if ((sgptr & SG_FULL_RESID) != 0) { 6114 /* Case 3 */ 6115 resid = ahc_get_transfer_length(scb); 6116 } else if ((resid_sgptr & SG_LIST_NULL) != 0) { 6117 /* Case 4 */ 6118 return; 6119 } else if ((resid_sgptr & ~SG_PTR_MASK) != 0) { 6120 panic("Bogus resid sgptr value 0x%x\n", resid_sgptr); 6121 } else { 6122 struct ahc_dma_seg *sg; 6123 6124 /* 6125 * Remainder of the SG where the transfer 6126 * stopped. 6127 */ 6128 resid = ahc_le32toh(spkt->residual_datacnt) & AHC_SG_LEN_MASK; 6129 sg = ahc_sg_bus_to_virt(scb, resid_sgptr & SG_PTR_MASK); 6130 6131 /* The residual sg_ptr always points to the next sg */ 6132 sg--; 6133 6134 /* 6135 * Add up the contents of all residual 6136 * SG segments that are after the SG where 6137 * the transfer stopped. 6138 */ 6139 while ((ahc_le32toh(sg->len) & AHC_DMA_LAST_SEG) == 0) { 6140 sg++; 6141 resid += ahc_le32toh(sg->len) & AHC_SG_LEN_MASK; 6142 } 6143 } 6144 if ((scb->flags & SCB_SENSE) == 0) 6145 ahc_set_residual(scb, resid); 6146 else 6147 ahc_set_sense_residual(scb, resid); 6148 6149 #ifdef AHC_DEBUG 6150 if ((ahc_debug & AHC_SHOW_MISC) != 0) { 6151 ahc_print_path(ahc, scb); 6152 printf("Handled %sResidual of %d bytes\n", 6153 (scb->flags & SCB_SENSE) ? "Sense " : "", resid); 6154 } 6155 #endif 6156 } 6157 6158 /******************************* Target Mode **********************************/ 6159 #ifdef AHC_TARGET_MODE 6160 /* 6161 * Add a target mode event to this lun's queue 6162 */ 6163 static void 6164 ahc_queue_lstate_event(struct ahc_softc *ahc, struct ahc_tmode_lstate *lstate, 6165 u_int initiator_id, u_int event_type, u_int event_arg) 6166 { 6167 struct ahc_tmode_event *event; 6168 int pending; 6169 6170 xpt_freeze_devq(lstate->path, /*count*/1); 6171 if (lstate->event_w_idx >= lstate->event_r_idx) 6172 pending = lstate->event_w_idx - lstate->event_r_idx; 6173 else 6174 pending = AHC_TMODE_EVENT_BUFFER_SIZE + 1 6175 - (lstate->event_r_idx - lstate->event_w_idx); 6176 6177 if (event_type == EVENT_TYPE_BUS_RESET 6178 || event_type == MSG_BUS_DEV_RESET) { 6179 /* 6180 * Any earlier events are irrelevant, so reset our buffer. 6181 * This has the effect of allowing us to deal with reset 6182 * floods (an external device holding down the reset line) 6183 * without losing the event that is really interesting. 6184 */ 6185 lstate->event_r_idx = 0; 6186 lstate->event_w_idx = 0; 6187 xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE); 6188 } 6189 6190 if (pending == AHC_TMODE_EVENT_BUFFER_SIZE) { 6191 xpt_print_path(lstate->path); 6192 printf("immediate event %x:%x lost\n", 6193 lstate->event_buffer[lstate->event_r_idx].event_type, 6194 lstate->event_buffer[lstate->event_r_idx].event_arg); 6195 lstate->event_r_idx++; 6196 if (lstate->event_r_idx == AHC_TMODE_EVENT_BUFFER_SIZE) 6197 lstate->event_r_idx = 0; 6198 xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE); 6199 } 6200 6201 event = &lstate->event_buffer[lstate->event_w_idx]; 6202 event->initiator_id = initiator_id; 6203 event->event_type = event_type; 6204 event->event_arg = event_arg; 6205 lstate->event_w_idx++; 6206 if (lstate->event_w_idx == AHC_TMODE_EVENT_BUFFER_SIZE) 6207 lstate->event_w_idx = 0; 6208 } 6209 6210 /* 6211 * Send any target mode events queued up waiting 6212 * for immediate notify resources. 6213 */ 6214 void 6215 ahc_send_lstate_events(struct ahc_softc *ahc, struct ahc_tmode_lstate *lstate) 6216 { 6217 struct ccb_hdr *ccbh; 6218 struct ccb_immed_notify *inot; 6219 6220 while (lstate->event_r_idx != lstate->event_w_idx 6221 && (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) { 6222 struct ahc_tmode_event *event; 6223 6224 event = &lstate->event_buffer[lstate->event_r_idx]; 6225 SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle); 6226 inot = (struct ccb_immed_notify *)ccbh; 6227 switch (event->event_type) { 6228 case EVENT_TYPE_BUS_RESET: 6229 ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN; 6230 break; 6231 default: 6232 ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN; 6233 inot->message_args[0] = event->event_type; 6234 inot->message_args[1] = event->event_arg; 6235 break; 6236 } 6237 inot->initiator_id = event->initiator_id; 6238 inot->sense_len = 0; 6239 xpt_done((union ccb *)inot); 6240 lstate->event_r_idx++; 6241 if (lstate->event_r_idx == AHC_TMODE_EVENT_BUFFER_SIZE) 6242 lstate->event_r_idx = 0; 6243 } 6244 } 6245 #endif 6246 6247 /******************** Sequencer Program Patching/Download *********************/ 6248 6249 #ifdef AHC_DUMP_SEQ 6250 void 6251 ahc_dumpseq(struct ahc_softc* ahc) 6252 { 6253 int i; 6254 int max_prog; 6255 6256 if ((ahc->chip & AHC_BUS_MASK) < AHC_PCI) 6257 max_prog = 448; 6258 else if ((ahc->features & AHC_ULTRA2) != 0) 6259 max_prog = 768; 6260 else 6261 max_prog = 512; 6262 6263 ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 6264 ahc_outb(ahc, SEQADDR0, 0); 6265 ahc_outb(ahc, SEQADDR1, 0); 6266 for (i = 0; i < max_prog; i++) { 6267 uint8_t ins_bytes[4]; 6268 6269 ahc_insb(ahc, SEQRAM, ins_bytes, 4); 6270 printf("0x%08x\n", ins_bytes[0] << 24 6271 | ins_bytes[1] << 16 6272 | ins_bytes[2] << 8 6273 | ins_bytes[3]); 6274 } 6275 } 6276 #endif 6277 6278 static void __noinline 6279 ahc_loadseq(struct ahc_softc *ahc) 6280 { 6281 struct cs cs_table[NUM_CRITICAL_SECTIONS]; 6282 u_int begin_set[NUM_CRITICAL_SECTIONS]; 6283 u_int end_set[NUM_CRITICAL_SECTIONS]; 6284 const struct patch *cur_patch; 6285 u_int cs_count; 6286 u_int cur_cs; 6287 u_int i; 6288 int downloaded; 6289 u_int skip_addr; 6290 u_int sg_prefetch_cnt; 6291 uint8_t download_consts[7]; 6292 6293 /* 6294 * Start out with 0 critical sections 6295 * that apply to this firmware load. 6296 */ 6297 cs_count = 0; 6298 cur_cs = 0; 6299 memset(begin_set, 0, sizeof(begin_set)); 6300 memset(end_set, 0, sizeof(end_set)); 6301 6302 /* Setup downloadable constant table */ 6303 download_consts[QOUTFIFO_OFFSET] = 0; 6304 if (ahc->targetcmds != NULL) 6305 download_consts[QOUTFIFO_OFFSET] += 32; 6306 download_consts[QINFIFO_OFFSET] = download_consts[QOUTFIFO_OFFSET] + 1; 6307 download_consts[CACHESIZE_MASK] = ahc->pci_cachesize - 1; 6308 download_consts[INVERTED_CACHESIZE_MASK] = ~(ahc->pci_cachesize - 1); 6309 sg_prefetch_cnt = ahc->pci_cachesize; 6310 if (sg_prefetch_cnt < (2 * sizeof(struct ahc_dma_seg))) 6311 sg_prefetch_cnt = 2 * sizeof(struct ahc_dma_seg); 6312 download_consts[SG_PREFETCH_CNT] = sg_prefetch_cnt; 6313 download_consts[SG_PREFETCH_ALIGN_MASK] = ~(sg_prefetch_cnt - 1); 6314 download_consts[SG_PREFETCH_ADDR_MASK] = (sg_prefetch_cnt - 1); 6315 6316 cur_patch = patches; 6317 downloaded = 0; 6318 skip_addr = 0; 6319 ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE|LOADRAM); 6320 ahc_outb(ahc, SEQADDR0, 0); 6321 ahc_outb(ahc, SEQADDR1, 0); 6322 6323 for (i = 0; i < sizeof(seqprog)/4; i++) { 6324 if (ahc_check_patch(ahc, &cur_patch, i, &skip_addr) == 0) { 6325 /* 6326 * Don't download this instruction as it 6327 * is in a patch that was removed. 6328 */ 6329 continue; 6330 } 6331 /* 6332 * Move through the CS table until we find a CS 6333 * that might apply to this instruction. 6334 */ 6335 for (; cur_cs < NUM_CRITICAL_SECTIONS; cur_cs++) { 6336 if (critical_sections[cur_cs].end <= i) { 6337 if (begin_set[cs_count] == TRUE 6338 && end_set[cs_count] == FALSE) { 6339 cs_table[cs_count].end = downloaded; 6340 end_set[cs_count] = TRUE; 6341 cs_count++; 6342 } 6343 continue; 6344 } 6345 if (critical_sections[cur_cs].begin <= i 6346 && begin_set[cs_count] == FALSE) { 6347 cs_table[cs_count].begin = downloaded; 6348 begin_set[cs_count] = TRUE; 6349 } 6350 break; 6351 } 6352 ahc_download_instr(ahc, i, download_consts); 6353 downloaded++; 6354 } 6355 6356 ahc->num_critical_sections = cs_count; 6357 if (cs_count != 0) { 6358 6359 cs_count *= sizeof(struct cs); 6360 ahc->critical_sections = malloc(cs_count, M_DEVBUF, M_WAITOK); 6361 memcpy(ahc->critical_sections, cs_table, cs_count); 6362 } 6363 ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE); 6364 ahc_restart(ahc); 6365 6366 if (bootverbose) { 6367 printf(" %d instructions downloaded\n", downloaded); 6368 printf("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n", 6369 ahc_name(ahc), ahc->features, ahc->bugs, ahc->flags); 6370 } 6371 } 6372 6373 static int 6374 ahc_check_patch(struct ahc_softc *ahc, const struct patch **start_patch, 6375 u_int start_instr, u_int *skip_addr) 6376 { 6377 const struct patch *cur_patch; 6378 const struct patch *last_patch; 6379 u_int num_patches; 6380 6381 num_patches = sizeof(patches)/sizeof(struct patch); 6382 last_patch = &patches[num_patches]; 6383 cur_patch = *start_patch; 6384 6385 while (cur_patch < last_patch && start_instr == cur_patch->begin) { 6386 6387 if (cur_patch->patch_func(ahc) == 0) { 6388 6389 /* Start rejecting code */ 6390 *skip_addr = start_instr + cur_patch->skip_instr; 6391 cur_patch += cur_patch->skip_patch; 6392 } else { 6393 /* Accepted this patch. Advance to the next 6394 * one and wait for our instruction pointer to 6395 * hit this point. 6396 */ 6397 cur_patch++; 6398 } 6399 } 6400 6401 *start_patch = cur_patch; 6402 if (start_instr < *skip_addr) 6403 /* Still skipping */ 6404 return (0); 6405 6406 return (1); 6407 } 6408 6409 static void 6410 ahc_download_instr(struct ahc_softc *ahc, u_int instrptr, uint8_t *dconsts) 6411 { 6412 union ins_formats instr; 6413 struct ins_format1 *fmt1_ins; 6414 struct ins_format3 *fmt3_ins; 6415 u_int opcode; 6416 6417 /* 6418 * The firmware is always compiled into a little endian format. 6419 */ 6420 instr.integer = ahc_le32toh(*(const uint32_t*)&seqprog[instrptr * 4]); 6421 6422 fmt1_ins = &instr.format1; 6423 fmt3_ins = NULL; 6424 6425 /* Pull the opcode */ 6426 opcode = instr.format1.opcode; 6427 switch (opcode) { 6428 case AIC_OP_JMP: 6429 case AIC_OP_JC: 6430 case AIC_OP_JNC: 6431 case AIC_OP_CALL: 6432 case AIC_OP_JNE: 6433 case AIC_OP_JNZ: 6434 case AIC_OP_JE: 6435 case AIC_OP_JZ: 6436 { 6437 const struct patch *cur_patch; 6438 int address_offset; 6439 u_int address; 6440 u_int skip_addr; 6441 u_int i; 6442 6443 fmt3_ins = &instr.format3; 6444 address_offset = 0; 6445 address = fmt3_ins->address; 6446 cur_patch = patches; 6447 skip_addr = 0; 6448 for (i = 0; i < address;) { 6449 ahc_check_patch(ahc, &cur_patch, i, &skip_addr); 6450 6451 if (skip_addr > i) { 6452 int end_addr; 6453 6454 end_addr = MIN(address, skip_addr); 6455 address_offset += end_addr - i; 6456 i = skip_addr; 6457 } else { 6458 i++; 6459 } 6460 } 6461 address -= address_offset; 6462 fmt3_ins->address = address; 6463 } 6464 /* FALLTHROUGH */ 6465 case AIC_OP_OR: 6466 case AIC_OP_AND: 6467 case AIC_OP_XOR: 6468 case AIC_OP_ADD: 6469 case AIC_OP_ADC: 6470 case AIC_OP_BMOV: 6471 if (fmt1_ins->parity != 0) { 6472 fmt1_ins->immediate = dconsts[fmt1_ins->immediate]; 6473 } 6474 fmt1_ins->parity = 0; 6475 if ((ahc->features & AHC_CMD_CHAN) == 0 6476 && opcode == AIC_OP_BMOV) { 6477 /* 6478 * Block move was added at the same time 6479 * as the command channel. Verify that 6480 * this is only a move of a single element 6481 * and convert the BMOV to a MOV 6482 * (AND with an immediate of FF). 6483 */ 6484 if (fmt1_ins->immediate != 1) 6485 panic("%s: BMOV not supported\n", 6486 ahc_name(ahc)); 6487 fmt1_ins->opcode = AIC_OP_AND; 6488 fmt1_ins->immediate = 0xff; 6489 } 6490 /* FALLTHROUGH */ 6491 case AIC_OP_ROL: 6492 if ((ahc->features & AHC_ULTRA2) != 0) { 6493 int i, count; 6494 6495 /* Calculate odd parity for the instruction */ 6496 for (i = 0, count = 0; i < 31; i++) { 6497 uint32_t mask; 6498 6499 mask = 0x01 << i; 6500 if ((instr.integer & mask) != 0) 6501 count++; 6502 } 6503 if ((count & 0x01) == 0) 6504 instr.format1.parity = 1; 6505 } else { 6506 /* Compress the instruction for older sequencers */ 6507 if (fmt3_ins != NULL) { 6508 instr.integer = 6509 fmt3_ins->immediate 6510 | (fmt3_ins->source << 8) 6511 | (fmt3_ins->address << 16) 6512 | (fmt3_ins->opcode << 25); 6513 } else { 6514 instr.integer = 6515 fmt1_ins->immediate 6516 | (fmt1_ins->source << 8) 6517 | (fmt1_ins->destination << 16) 6518 | (fmt1_ins->ret << 24) 6519 | (fmt1_ins->opcode << 25); 6520 } 6521 } 6522 /* The sequencer is a little endian CPU */ 6523 instr.integer = ahc_htole32(instr.integer); 6524 ahc_outsb(ahc, SEQRAM, instr.bytes, 4); 6525 break; 6526 default: 6527 panic("Unknown opcode encountered in seq program"); 6528 break; 6529 } 6530 } 6531 6532 int 6533 ahc_print_register(ahc_reg_parse_entry_t *table, u_int num_entries, 6534 const char *name, u_int address, u_int value, 6535 u_int *cur_column, u_int wrap_point) 6536 { 6537 size_t printed; 6538 u_int printed_mask; 6539 char line[1024]; 6540 6541 line[0] = 0; 6542 6543 if (cur_column != NULL && *cur_column >= wrap_point) { 6544 printf("\n"); 6545 *cur_column = 0; 6546 } 6547 printed = snprintf(line, sizeof(line), "%s[0x%x]", name, value); 6548 if (printed > sizeof(line)) 6549 printed = sizeof(line); 6550 if (table == NULL) { 6551 printed += snprintf(&line[printed], (sizeof line) - printed, 6552 " "); 6553 if (printed > sizeof(line)) 6554 printed = sizeof(line); 6555 printf("%s", line); 6556 if (cur_column != NULL) 6557 *cur_column += printed; 6558 return (printed); 6559 } 6560 printed_mask = 0; 6561 while (printed_mask != 0xFF) { 6562 int entry; 6563 6564 for (entry = 0; entry < num_entries; entry++) { 6565 if (((value & table[entry].mask) 6566 != table[entry].value) 6567 || ((printed_mask & table[entry].mask) 6568 == table[entry].mask)) 6569 continue; 6570 if (printed > sizeof(line)) 6571 printed = sizeof(line); 6572 printed += snprintf(&line[printed], 6573 (sizeof line) - printed, "%s%s", 6574 printed_mask == 0 ? ":(" : "|", 6575 table[entry].name); 6576 printed_mask |= table[entry].mask; 6577 6578 break; 6579 } 6580 if (entry >= num_entries) 6581 break; 6582 } 6583 if (printed > sizeof(line)) 6584 printed = sizeof(line); 6585 if (printed_mask != 0) 6586 printed += snprintf(&line[printed], 6587 (sizeof line) - printed, ") "); 6588 else 6589 printed += snprintf(&line[printed], 6590 (sizeof line) - printed, " "); 6591 if (cur_column != NULL) 6592 *cur_column += printed; 6593 printf("%s", line); 6594 6595 return (printed); 6596 } 6597 6598 void 6599 ahc_dump_card_state(struct ahc_softc *ahc) 6600 { 6601 struct scb *scb; 6602 struct scb_tailq *untagged_q; 6603 u_int cur_col; 6604 int paused; 6605 int target; 6606 int maxtarget; 6607 int i; 6608 uint8_t last_phase; 6609 uint8_t qinpos; 6610 uint8_t qintail; 6611 uint8_t qoutpos; 6612 uint8_t scb_index; 6613 uint8_t saved_scbptr; 6614 6615 if (ahc_is_paused(ahc)) { 6616 paused = 1; 6617 } else { 6618 paused = 0; 6619 ahc_pause(ahc); 6620 } 6621 6622 saved_scbptr = ahc_inb(ahc, SCBPTR); 6623 last_phase = ahc_inb(ahc, LASTPHASE); 6624 printf(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n" 6625 "%s: Dumping Card State %s, at SEQADDR 0x%x\n", 6626 ahc_name(ahc), ahc_lookup_phase_entry(last_phase)->phasemsg, 6627 ahc_inb(ahc, SEQADDR0) | (ahc_inb(ahc, SEQADDR1) << 8)); 6628 if (paused) 6629 printf("Card was paused\n"); 6630 printf("ACCUM = 0x%x, SINDEX = 0x%x, DINDEX = 0x%x, ARG_2 = 0x%x\n", 6631 ahc_inb(ahc, ACCUM), ahc_inb(ahc, SINDEX), ahc_inb(ahc, DINDEX), 6632 ahc_inb(ahc, ARG_2)); 6633 printf("HCNT = 0x%x SCBPTR = 0x%x\n", ahc_inb(ahc, HCNT), 6634 ahc_inb(ahc, SCBPTR)); 6635 cur_col = 0; 6636 if ((ahc->features & AHC_DT) != 0) 6637 ahc_scsiphase_print(ahc_inb(ahc, SCSIPHASE), &cur_col, 50); 6638 ahc_scsisigi_print(ahc_inb(ahc, SCSISIGI), &cur_col, 50); 6639 ahc_error_print(ahc_inb(ahc, ERROR), &cur_col, 50); 6640 ahc_scsibusl_print(ahc_inb(ahc, SCSIBUSL), &cur_col, 50); 6641 ahc_lastphase_print(ahc_inb(ahc, LASTPHASE), &cur_col, 50); 6642 ahc_scsiseq_print(ahc_inb(ahc, SCSISEQ), &cur_col, 50); 6643 ahc_sblkctl_print(ahc_inb(ahc, SBLKCTL), &cur_col, 50); 6644 ahc_scsirate_print(ahc_inb(ahc, SCSIRATE), &cur_col, 50); 6645 ahc_seqctl_print(ahc_inb(ahc, SEQCTL), &cur_col, 50); 6646 ahc_seq_flags_print(ahc_inb(ahc, SEQ_FLAGS), &cur_col, 50); 6647 ahc_sstat0_print(ahc_inb(ahc, SSTAT0), &cur_col, 50); 6648 ahc_sstat1_print(ahc_inb(ahc, SSTAT1), &cur_col, 50); 6649 ahc_sstat2_print(ahc_inb(ahc, SSTAT2), &cur_col, 50); 6650 ahc_sstat3_print(ahc_inb(ahc, SSTAT3), &cur_col, 50); 6651 ahc_simode0_print(ahc_inb(ahc, SIMODE0), &cur_col, 50); 6652 ahc_simode1_print(ahc_inb(ahc, SIMODE1), &cur_col, 50); 6653 ahc_sxfrctl0_print(ahc_inb(ahc, SXFRCTL0), &cur_col, 50); 6654 ahc_dfcntrl_print(ahc_inb(ahc, DFCNTRL), &cur_col, 50); 6655 ahc_dfstatus_print(ahc_inb(ahc, DFSTATUS), &cur_col, 50); 6656 if (cur_col != 0) 6657 printf("\n"); 6658 printf("STACK:"); 6659 for (i = 0; i < STACK_SIZE; i++) 6660 printf(" 0x%x", ahc_inb(ahc, STACK)|(ahc_inb(ahc, STACK) << 8)); 6661 printf("\nSCB count = %d\n", ahc->scb_data->numscbs); 6662 printf("Kernel NEXTQSCB = %d\n", ahc->next_queued_scb->hscb->tag); 6663 printf("Card NEXTQSCB = %d\n", ahc_inb(ahc, NEXT_QUEUED_SCB)); 6664 /* QINFIFO */ 6665 printf("QINFIFO entries: "); 6666 if ((ahc->features & AHC_QUEUE_REGS) != 0) { 6667 qinpos = ahc_inb(ahc, SNSCB_QOFF); 6668 ahc_outb(ahc, SNSCB_QOFF, qinpos); 6669 } else 6670 qinpos = ahc_inb(ahc, QINPOS); 6671 qintail = ahc->qinfifonext; 6672 while (qinpos != qintail) { 6673 printf("%d ", ahc->qinfifo[qinpos]); 6674 qinpos++; 6675 } 6676 printf("\n"); 6677 6678 printf("Waiting Queue entries: "); 6679 scb_index = ahc_inb(ahc, WAITING_SCBH); 6680 i = 0; 6681 while (scb_index != SCB_LIST_NULL && i++ < 256) { 6682 ahc_outb(ahc, SCBPTR, scb_index); 6683 printf("%d:%d ", scb_index, ahc_inb(ahc, SCB_TAG)); 6684 scb_index = ahc_inb(ahc, SCB_NEXT); 6685 } 6686 printf("\n"); 6687 6688 printf("Disconnected Queue entries: "); 6689 scb_index = ahc_inb(ahc, DISCONNECTED_SCBH); 6690 i = 0; 6691 while (scb_index != SCB_LIST_NULL && i++ < 256) { 6692 ahc_outb(ahc, SCBPTR, scb_index); 6693 printf("%d:%d ", scb_index, ahc_inb(ahc, SCB_TAG)); 6694 scb_index = ahc_inb(ahc, SCB_NEXT); 6695 } 6696 printf("\n"); 6697 6698 ahc_sync_qoutfifo(ahc, BUS_DMASYNC_POSTREAD); 6699 printf("QOUTFIFO entries: "); 6700 qoutpos = ahc->qoutfifonext; 6701 i = 0; 6702 while (ahc->qoutfifo[qoutpos] != SCB_LIST_NULL && i++ < 256) { 6703 printf("%d ", ahc->qoutfifo[qoutpos]); 6704 qoutpos++; 6705 } 6706 printf("\n"); 6707 6708 printf("Sequencer Free SCB List: "); 6709 scb_index = ahc_inb(ahc, FREE_SCBH); 6710 i = 0; 6711 while (scb_index != SCB_LIST_NULL && i++ < 256) { 6712 ahc_outb(ahc, SCBPTR, scb_index); 6713 printf("%d ", scb_index); 6714 scb_index = ahc_inb(ahc, SCB_NEXT); 6715 } 6716 printf("\n"); 6717 6718 printf("Sequencer SCB Info: "); 6719 for (i = 0; i < ahc->scb_data->maxhscbs; i++) { 6720 ahc_outb(ahc, SCBPTR, i); 6721 /*cur_col =*/ printf("\n%3d ", i); 6722 6723 ahc_scb_control_print(ahc_inb(ahc, SCB_CONTROL), &cur_col, 60); 6724 ahc_scb_scsiid_print(ahc_inb(ahc, SCB_SCSIID), &cur_col, 60); 6725 ahc_scb_lun_print(ahc_inb(ahc, SCB_LUN), &cur_col, 60); 6726 ahc_scb_tag_print(ahc_inb(ahc, SCB_TAG), &cur_col, 60); 6727 } 6728 printf("\n"); 6729 6730 printf("Pending list: "); 6731 i = 0; 6732 LIST_FOREACH(scb, &ahc->pending_scbs, pending_links) { 6733 if (i++ > 256) 6734 break; 6735 /*cur_col =*/ printf("\n%3d ", scb->hscb->tag); 6736 ahc_scb_control_print(scb->hscb->control, &cur_col, 60); 6737 ahc_scb_scsiid_print(scb->hscb->scsiid, &cur_col, 60); 6738 ahc_scb_lun_print(scb->hscb->lun, &cur_col, 60); 6739 if ((ahc->flags & AHC_PAGESCBS) == 0) { 6740 ahc_outb(ahc, SCBPTR, scb->hscb->tag); 6741 printf("("); 6742 ahc_scb_control_print(ahc_inb(ahc, SCB_CONTROL), 6743 &cur_col, 60); 6744 ahc_scb_tag_print(ahc_inb(ahc, SCB_TAG), &cur_col, 60); 6745 printf(")"); 6746 } 6747 } 6748 printf("\n"); 6749 6750 printf("Kernel Free SCB list: "); 6751 i = 0; 6752 SLIST_FOREACH(scb, &ahc->scb_data->free_scbs, links.sle) { 6753 if (i++ > 256) 6754 break; 6755 printf("%d ", scb->hscb->tag); 6756 } 6757 printf("\n"); 6758 6759 maxtarget = (ahc->features & (AHC_WIDE|AHC_TWIN)) ? 15 : 7; 6760 for (target = 0; target <= maxtarget; target++) { 6761 untagged_q = &ahc->untagged_queues[target]; 6762 if (TAILQ_FIRST(untagged_q) == NULL) 6763 continue; 6764 printf("Untagged Q(%d): ", target); 6765 i = 0; 6766 TAILQ_FOREACH(scb, untagged_q, links.tqe) { 6767 if (i++ > 256) 6768 break; 6769 printf("%d ", scb->hscb->tag); 6770 } 6771 printf("\n"); 6772 } 6773 6774 ahc_platform_dump_card_state(ahc); 6775 printf("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n"); 6776 ahc_outb(ahc, SCBPTR, saved_scbptr); 6777 if (paused == 0) 6778 ahc_unpause(ahc); 6779 } 6780 6781 /************************* Target Mode ****************************************/ 6782 #ifdef AHC_TARGET_MODE 6783 cam_status 6784 ahc_find_tmode_devs(struct ahc_softc *ahc, struct cam_sim *sim, union ccb *ccb, 6785 struct ahc_tmode_tstate **tstate, 6786 struct ahc_tmode_lstate **lstate, 6787 int notfound_failure) 6788 { 6789 6790 if ((ahc->features & AHC_TARGETMODE) == 0) 6791 return (CAM_REQ_INVALID); 6792 6793 /* 6794 * Handle the 'black hole' device that sucks up 6795 * requests to unattached luns on enabled targets. 6796 */ 6797 if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD 6798 && ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) { 6799 *tstate = NULL; 6800 *lstate = ahc->black_hole; 6801 } else { 6802 u_int max_id; 6803 6804 max_id = (ahc->features & AHC_WIDE) ? 15 : 7; 6805 if (ccb->ccb_h.target_id > max_id) 6806 return (CAM_TID_INVALID); 6807 6808 if (ccb->ccb_h.target_lun >= AHC_NUM_LUNS) 6809 return (CAM_LUN_INVALID); 6810 6811 *tstate = ahc->enabled_targets[ccb->ccb_h.target_id]; 6812 *lstate = NULL; 6813 if (*tstate != NULL) 6814 *lstate = 6815 (*tstate)->enabled_luns[ccb->ccb_h.target_lun]; 6816 } 6817 6818 if (notfound_failure != 0 && *lstate == NULL) 6819 return (CAM_PATH_INVALID); 6820 6821 return (CAM_REQ_CMP); 6822 } 6823 6824 void 6825 ahc_handle_en_lun(struct ahc_softc *ahc, struct cam_sim *sim, union ccb *ccb) 6826 { 6827 struct ahc_tmode_tstate *tstate; 6828 struct ahc_tmode_lstate *lstate; 6829 struct ccb_en_lun *cel; 6830 cam_status status; 6831 u_int target; 6832 u_int lun; 6833 u_int target_mask; 6834 u_int our_id; 6835 u_long s; 6836 char channel; 6837 6838 status = ahc_find_tmode_devs(ahc, sim, ccb, &tstate, &lstate, 6839 /*notfound_failure*/FALSE); 6840 6841 if (status != CAM_REQ_CMP) { 6842 ccb->ccb_h.status = status; 6843 return; 6844 } 6845 6846 if (cam_sim_bus(sim) == 0) 6847 our_id = ahc->our_id; 6848 else 6849 our_id = ahc->our_id_b; 6850 6851 if (ccb->ccb_h.target_id != our_id) { 6852 /* 6853 * our_id represents our initiator ID, or 6854 * the ID of the first target to have an 6855 * enabled lun in target mode. There are 6856 * two cases that may preclude enabling a 6857 * target id other than our_id. 6858 * 6859 * o our_id is for an active initiator role. 6860 * Since the hardware does not support 6861 * reselections to the initiator role at 6862 * anything other than our_id, and our_id 6863 * is used by the hardware to indicate the 6864 * ID to use for both select-out and 6865 * reselect-out operations, the only target 6866 * ID we can support in this mode is our_id. 6867 * 6868 * o The MULTARGID feature is not available and 6869 * a previous target mode ID has been enabled. 6870 */ 6871 if ((ahc->features & AHC_MULTIROLE) != 0) { 6872 6873 if ((ahc->features & AHC_MULTI_TID) != 0 6874 && (ahc->flags & AHC_INITIATORROLE) != 0) { 6875 /* 6876 * Only allow additional targets if 6877 * the initiator role is disabled. 6878 * The hardware cannot handle a re-select-in 6879 * on the initiator id during a re-select-out 6880 * on a different target id. 6881 */ 6882 status = CAM_TID_INVALID; 6883 } else if ((ahc->flags & AHC_INITIATORROLE) != 0 6884 || ahc->enabled_luns > 0) { 6885 /* 6886 * Only allow our target id to change 6887 * if the initiator role is not configured 6888 * and there are no enabled luns which 6889 * are attached to the currently registered 6890 * scsi id. 6891 */ 6892 status = CAM_TID_INVALID; 6893 } 6894 } else if ((ahc->features & AHC_MULTI_TID) == 0 6895 && ahc->enabled_luns > 0) { 6896 6897 status = CAM_TID_INVALID; 6898 } 6899 } 6900 6901 if (status != CAM_REQ_CMP) { 6902 ccb->ccb_h.status = status; 6903 return; 6904 } 6905 6906 /* 6907 * We now have an id that is valid. 6908 * If we aren't in target mode, switch modes. 6909 */ 6910 if ((ahc->flags & AHC_TARGETROLE) == 0 6911 && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) { 6912 u_long s; 6913 6914 printf("Configuring Target Mode\n"); 6915 ahc_lock(ahc, &s); 6916 if (LIST_FIRST(&ahc->pending_scbs) != NULL) { 6917 ccb->ccb_h.status = CAM_BUSY; 6918 ahc_unlock(ahc, &s); 6919 return; 6920 } 6921 ahc->flags |= AHC_TARGETROLE; 6922 if ((ahc->features & AHC_MULTIROLE) == 0) 6923 ahc->flags &= ~AHC_INITIATORROLE; 6924 ahc_pause(ahc); 6925 ahc_loadseq(ahc); 6926 ahc_unlock(ahc, &s); 6927 } 6928 cel = &ccb->cel; 6929 target = ccb->ccb_h.target_id; 6930 lun = ccb->ccb_h.target_lun; 6931 channel = SIM_CHANNEL(ahc, sim); 6932 target_mask = 0x01 << target; 6933 if (channel == 'B') 6934 target_mask <<= 8; 6935 6936 if (cel->enable != 0) { 6937 u_int scsiseq; 6938 6939 /* Are we already enabled?? */ 6940 if (lstate != NULL) { 6941 xpt_print_path(ccb->ccb_h.path); 6942 printf("Lun already enabled\n"); 6943 ccb->ccb_h.status = CAM_LUN_ALRDY_ENA; 6944 return; 6945 } 6946 6947 if (cel->grp6_len != 0 6948 || cel->grp7_len != 0) { 6949 /* 6950 * Don't (yet?) support vendor 6951 * specific commands. 6952 */ 6953 ccb->ccb_h.status = CAM_REQ_INVALID; 6954 printf("Non-zero Group Codes\n"); 6955 return; 6956 } 6957 6958 /* 6959 * Seems to be okay. 6960 * Setup our data structures. 6961 */ 6962 if (target != CAM_TARGET_WILDCARD && tstate == NULL) { 6963 tstate = ahc_alloc_tstate(ahc, target, channel); 6964 if (tstate == NULL) { 6965 xpt_print_path(ccb->ccb_h.path); 6966 printf("Couldn't allocate tstate\n"); 6967 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 6968 return; 6969 } 6970 } 6971 lstate = malloc(sizeof(*lstate), M_DEVBUF, M_NOWAIT); 6972 if (lstate == NULL) { 6973 xpt_print_path(ccb->ccb_h.path); 6974 printf("Couldn't allocate lstate\n"); 6975 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 6976 return; 6977 } 6978 memset(lstate, 0, sizeof(*lstate)); 6979 status = xpt_create_path(&lstate->path, /*periph*/NULL, 6980 xpt_path_path_id(ccb->ccb_h.path), 6981 xpt_path_target_id(ccb->ccb_h.path), 6982 xpt_path_lun_id(ccb->ccb_h.path)); 6983 if (status != CAM_REQ_CMP) { 6984 free(lstate, M_DEVBUF); 6985 xpt_print_path(ccb->ccb_h.path); 6986 printf("Couldn't allocate path\n"); 6987 ccb->ccb_h.status = CAM_RESRC_UNAVAIL; 6988 return; 6989 } 6990 SLIST_INIT(&lstate->accept_tios); 6991 SLIST_INIT(&lstate->immed_notifies); 6992 ahc_lock(ahc, &s); 6993 ahc_pause(ahc); 6994 if (target != CAM_TARGET_WILDCARD) { 6995 tstate->enabled_luns[lun] = lstate; 6996 ahc->enabled_luns++; 6997 6998 if ((ahc->features & AHC_MULTI_TID) != 0) { 6999 u_int targid_mask; 7000 7001 targid_mask = ahc_inb(ahc, TARGID) 7002 | (ahc_inb(ahc, TARGID + 1) << 8); 7003 7004 targid_mask |= target_mask; 7005 ahc_outb(ahc, TARGID, targid_mask); 7006 ahc_outb(ahc, TARGID+1, (targid_mask >> 8)); 7007 7008 ahc_update_scsiid(ahc, targid_mask); 7009 } else { 7010 u_int our_id; 7011 char channel; 7012 7013 channel = SIM_CHANNEL(ahc, sim); 7014 our_id = SIM_SCSI_ID(ahc, sim); 7015 7016 /* 7017 * This can only happen if selections 7018 * are not enabled 7019 */ 7020 if (target != our_id) { 7021 u_int sblkctl; 7022 char cur_channel; 7023 int swap; 7024 7025 sblkctl = ahc_inb(ahc, SBLKCTL); 7026 cur_channel = (sblkctl & SELBUSB) 7027 ? 'B' : 'A'; 7028 if ((ahc->features & AHC_TWIN) == 0) 7029 cur_channel = 'A'; 7030 swap = cur_channel != channel; 7031 if (channel == 'A') 7032 ahc->our_id = target; 7033 else 7034 ahc->our_id_b = target; 7035 7036 if (swap) 7037 ahc_outb(ahc, SBLKCTL, 7038 sblkctl ^ SELBUSB); 7039 7040 ahc_outb(ahc, SCSIID, target); 7041 7042 if (swap) 7043 ahc_outb(ahc, SBLKCTL, sblkctl); 7044 } 7045 } 7046 } else 7047 ahc->black_hole = lstate; 7048 /* Allow select-in operations */ 7049 if (ahc->black_hole != NULL && ahc->enabled_luns > 0) { 7050 scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE); 7051 scsiseq |= ENSELI; 7052 ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq); 7053 scsiseq = ahc_inb(ahc, SCSISEQ); 7054 scsiseq |= ENSELI; 7055 ahc_outb(ahc, SCSISEQ, scsiseq); 7056 } 7057 ahc_unpause(ahc); 7058 ahc_unlock(ahc, &s); 7059 ccb->ccb_h.status = CAM_REQ_CMP; 7060 xpt_print_path(ccb->ccb_h.path); 7061 printf("Lun now enabled for target mode\n"); 7062 } else { 7063 struct scb *scb; 7064 int i, empty; 7065 7066 if (lstate == NULL) { 7067 ccb->ccb_h.status = CAM_LUN_INVALID; 7068 return; 7069 } 7070 7071 ahc_lock(ahc, &s); 7072 7073 ccb->ccb_h.status = CAM_REQ_CMP; 7074 LIST_FOREACH(scb, &ahc->pending_scbs, pending_links) { 7075 struct ccb_hdr *ccbh; 7076 7077 ccbh = &scb->io_ctx->ccb_h; 7078 if (ccbh->func_code == XPT_CONT_TARGET_IO 7079 && !xpt_path_comp(ccbh->path, ccb->ccb_h.path)){ 7080 printf("CTIO pending\n"); 7081 ccb->ccb_h.status = CAM_REQ_INVALID; 7082 ahc_unlock(ahc, &s); 7083 return; 7084 } 7085 } 7086 7087 if (SLIST_FIRST(&lstate->accept_tios) != NULL) { 7088 printf("ATIOs pending\n"); 7089 ccb->ccb_h.status = CAM_REQ_INVALID; 7090 } 7091 7092 if (SLIST_FIRST(&lstate->immed_notifies) != NULL) { 7093 printf("INOTs pending\n"); 7094 ccb->ccb_h.status = CAM_REQ_INVALID; 7095 } 7096 7097 if (ccb->ccb_h.status != CAM_REQ_CMP) { 7098 ahc_unlock(ahc, &s); 7099 return; 7100 } 7101 7102 xpt_print_path(ccb->ccb_h.path); 7103 printf("Target mode disabled\n"); 7104 xpt_free_path(lstate->path); 7105 free(lstate, M_DEVBUF); 7106 7107 ahc_pause(ahc); 7108 /* Can we clean up the target too? */ 7109 if (target != CAM_TARGET_WILDCARD) { 7110 tstate->enabled_luns[lun] = NULL; 7111 ahc->enabled_luns--; 7112 for (empty = 1, i = 0; i < 8; i++) 7113 if (tstate->enabled_luns[i] != NULL) { 7114 empty = 0; 7115 break; 7116 } 7117 7118 if (empty) { 7119 ahc_free_tstate(ahc, target, channel, 7120 /*force*/FALSE); 7121 if (ahc->features & AHC_MULTI_TID) { 7122 u_int targid_mask; 7123 7124 targid_mask = ahc_inb(ahc, TARGID) 7125 | (ahc_inb(ahc, TARGID + 1) 7126 << 8); 7127 7128 targid_mask &= ~target_mask; 7129 ahc_outb(ahc, TARGID, targid_mask); 7130 ahc_outb(ahc, TARGID+1, 7131 (targid_mask >> 8)); 7132 ahc_update_scsiid(ahc, targid_mask); 7133 } 7134 } 7135 } else { 7136 7137 ahc->black_hole = NULL; 7138 7139 /* 7140 * We can't allow selections without 7141 * our black hole device. 7142 */ 7143 empty = TRUE; 7144 } 7145 if (ahc->enabled_luns == 0) { 7146 /* Disallow select-in */ 7147 u_int scsiseq; 7148 7149 scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE); 7150 scsiseq &= ~ENSELI; 7151 ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq); 7152 scsiseq = ahc_inb(ahc, SCSISEQ); 7153 scsiseq &= ~ENSELI; 7154 ahc_outb(ahc, SCSISEQ, scsiseq); 7155 7156 if ((ahc->features & AHC_MULTIROLE) == 0) { 7157 printf("Configuring Initiator Mode\n"); 7158 ahc->flags &= ~AHC_TARGETROLE; 7159 ahc->flags |= AHC_INITIATORROLE; 7160 ahc_pause(ahc); 7161 ahc_loadseq(ahc); 7162 } 7163 } 7164 ahc_unpause(ahc); 7165 ahc_unlock(ahc, &s); 7166 } 7167 } 7168 7169 static void 7170 ahc_update_scsiid(struct ahc_softc *ahc, u_int targid_mask) 7171 { 7172 u_int scsiid_mask; 7173 u_int scsiid; 7174 7175 if ((ahc->features & AHC_MULTI_TID) == 0) 7176 panic("ahc_update_scsiid called on non-multitid unit\n"); 7177 7178 /* 7179 * Since we will rely on the TARGID mask 7180 * for selection enables, ensure that OID 7181 * in SCSIID is not set to some other ID 7182 * that we don't want to allow selections on. 7183 */ 7184 if ((ahc->features & AHC_ULTRA2) != 0) 7185 scsiid = ahc_inb(ahc, SCSIID_ULTRA2); 7186 else 7187 scsiid = ahc_inb(ahc, SCSIID); 7188 scsiid_mask = 0x1 << (scsiid & OID); 7189 if ((targid_mask & scsiid_mask) == 0) { 7190 u_int our_id; 7191 7192 /* ffs counts from 1 */ 7193 our_id = ffs(targid_mask); 7194 if (our_id == 0) 7195 our_id = ahc->our_id; 7196 else 7197 our_id--; 7198 scsiid &= TID; 7199 scsiid |= our_id; 7200 } 7201 if ((ahc->features & AHC_ULTRA2) != 0) 7202 ahc_outb(ahc, SCSIID_ULTRA2, scsiid); 7203 else 7204 ahc_outb(ahc, SCSIID, scsiid); 7205 } 7206 7207 void 7208 ahc_run_tqinfifo(struct ahc_softc *ahc, int paused) 7209 { 7210 struct target_cmd *cmd; 7211 7212 /* 7213 * If the card supports auto-access pause, 7214 * we can access the card directly regardless 7215 * of whether it is paused or not. 7216 */ 7217 if ((ahc->features & AHC_AUTOPAUSE) != 0) 7218 paused = TRUE; 7219 7220 ahc_sync_tqinfifo(ahc, BUS_DMASYNC_POSTREAD); 7221 while ((cmd = &ahc->targetcmds[ahc->tqinfifonext])->cmd_valid != 0) { 7222 7223 /* 7224 * Only advance through the queue if we 7225 * have the resources to process the command. 7226 */ 7227 if (ahc_handle_target_cmd(ahc, cmd) != 0) 7228 break; 7229 7230 cmd->cmd_valid = 0; 7231 ahc_dmamap_sync(ahc, ahc->parent_dmat/*shared_data_dmat*/, 7232 ahc->shared_data_dmamap, 7233 ahc_targetcmd_offset(ahc, ahc->tqinfifonext), 7234 sizeof(struct target_cmd), 7235 BUS_DMASYNC_PREREAD); 7236 ahc->tqinfifonext++; 7237 7238 /* 7239 * Lazily update our position in the target mode incoming 7240 * command queue as seen by the sequencer. 7241 */ 7242 if ((ahc->tqinfifonext & (HOST_TQINPOS - 1)) == 1) { 7243 if ((ahc->features & AHC_HS_MAILBOX) != 0) { 7244 u_int hs_mailbox; 7245 7246 hs_mailbox = ahc_inb(ahc, HS_MAILBOX); 7247 hs_mailbox &= ~HOST_TQINPOS; 7248 hs_mailbox |= ahc->tqinfifonext & HOST_TQINPOS; 7249 ahc_outb(ahc, HS_MAILBOX, hs_mailbox); 7250 } else { 7251 if (!paused) 7252 ahc_pause(ahc); 7253 ahc_outb(ahc, KERNEL_TQINPOS, 7254 ahc->tqinfifonext & HOST_TQINPOS); 7255 if (!paused) 7256 ahc_unpause(ahc); 7257 } 7258 } 7259 } 7260 } 7261 7262 static int 7263 ahc_handle_target_cmd(struct ahc_softc *ahc, struct target_cmd *cmd) 7264 { 7265 struct ahc_tmode_tstate *tstate; 7266 struct ahc_tmode_lstate *lstate; 7267 struct ccb_accept_tio *atio; 7268 uint8_t *byte; 7269 int initiator; 7270 int target; 7271 int lun; 7272 7273 initiator = SCSIID_TARGET(ahc, cmd->scsiid); 7274 target = SCSIID_OUR_ID(cmd->scsiid); 7275 lun = (cmd->identify & MSG_IDENTIFY_LUNMASK); 7276 7277 byte = cmd->bytes; 7278 tstate = ahc->enabled_targets[target]; 7279 lstate = NULL; 7280 if (tstate != NULL) 7281 lstate = tstate->enabled_luns[lun]; 7282 7283 /* 7284 * Commands for disabled luns go to the black hole driver. 7285 */ 7286 if (lstate == NULL) 7287 lstate = ahc->black_hole; 7288 7289 atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios); 7290 if (atio == NULL) { 7291 ahc->flags |= AHC_TQINFIFO_BLOCKED; 7292 /* 7293 * Wait for more ATIOs from the peripheral driver for this lun. 7294 */ 7295 if (bootverbose) 7296 printf("%s: ATIOs exhausted\n", ahc_name(ahc)); 7297 return (1); 7298 } else 7299 ahc->flags &= ~AHC_TQINFIFO_BLOCKED; 7300 #if 0 7301 printf("Incoming command from %d for %d:%d%s\n", 7302 initiator, target, lun, 7303 lstate == ahc->black_hole ? "(Black Holed)" : ""); 7304 #endif 7305 SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle); 7306 7307 if (lstate == ahc->black_hole) { 7308 /* Fill in the wildcards */ 7309 atio->ccb_h.target_id = target; 7310 atio->ccb_h.target_lun = lun; 7311 } 7312 7313 /* 7314 * Package it up and send it off to 7315 * whomever has this lun enabled. 7316 */ 7317 atio->sense_len = 0; 7318 atio->init_id = initiator; 7319 if (byte[0] != 0xFF) { 7320 /* Tag was included */ 7321 atio->tag_action = *byte++; 7322 atio->tag_id = *byte++; 7323 atio->ccb_h.flags = CAM_TAG_ACTION_VALID; 7324 } else { 7325 atio->ccb_h.flags = 0; 7326 } 7327 byte++; 7328 7329 /* Okay. Now determine the cdb size based on the command code */ 7330 switch (*byte >> CMD_GROUP_CODE_SHIFT) { 7331 case 0: 7332 atio->cdb_len = 6; 7333 break; 7334 case 1: 7335 case 2: 7336 atio->cdb_len = 10; 7337 break; 7338 case 4: 7339 atio->cdb_len = 16; 7340 break; 7341 case 5: 7342 atio->cdb_len = 12; 7343 break; 7344 case 3: 7345 default: 7346 /* Only copy the opcode. */ 7347 atio->cdb_len = 1; 7348 printf("Reserved or VU command code type encountered\n"); 7349 break; 7350 } 7351 7352 memcpy(atio->cdb_io.cdb_bytes, byte, atio->cdb_len); 7353 7354 atio->ccb_h.status |= CAM_CDB_RECVD; 7355 7356 if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) { 7357 /* 7358 * We weren't allowed to disconnect. 7359 * We're hanging on the bus until a 7360 * continue target I/O comes in response 7361 * to this accept tio. 7362 */ 7363 #if 0 7364 printf("Received Immediate Command %d:%d:%d - %p\n", 7365 initiator, target, lun, ahc->pending_device); 7366 #endif 7367 ahc->pending_device = lstate; 7368 ahc_freeze_ccb((union ccb *)atio); 7369 atio->ccb_h.flags |= CAM_DIS_DISCONNECT; 7370 } 7371 xpt_done((union ccb*)atio); 7372 return (0); 7373 } 7374 #endif 7375 7376 static int 7377 ahc_createdmamem(bus_dma_tag_t tag, int size, int flags, bus_dmamap_t *mapp, 7378 void **vaddr, bus_addr_t *baddr, bus_dma_segment_t *seg, int *nseg, 7379 const char *myname, const char *what) 7380 { 7381 int error, level = 0; 7382 7383 if ((error = bus_dmamem_alloc(tag, size, PAGE_SIZE, 0, 7384 seg, 1, nseg, BUS_DMA_WAITOK)) != 0) { 7385 printf("%s: failed to allocate DMA mem for %s, error = %d\n", 7386 myname, what, error); 7387 goto out; 7388 } 7389 level++; 7390 7391 if ((error = bus_dmamem_map(tag, seg, *nseg, size, vaddr, 7392 BUS_DMA_WAITOK|BUS_DMA_COHERENT)) != 0) { 7393 printf("%s: failed to map DMA mem for %s, error = %d\n", 7394 myname, what, error); 7395 goto out; 7396 } 7397 level++; 7398 7399 if ((error = bus_dmamap_create(tag, size, 1, size, 0, 7400 BUS_DMA_WAITOK | flags, mapp)) != 0) { 7401 printf("%s: failed to create DMA map for %s, error = %d\n", 7402 myname, what, error); 7403 goto out; 7404 } 7405 level++; 7406 7407 7408 if ((error = bus_dmamap_load(tag, *mapp, *vaddr, size, NULL, 7409 BUS_DMA_WAITOK)) != 0) { 7410 printf("%s: failed to load DMA map for %s, error = %d\n", 7411 myname, what, error); 7412 goto out; 7413 } 7414 7415 *baddr = (*mapp)->dm_segs[0].ds_addr; 7416 7417 return 0; 7418 out: 7419 printf("ahc_createdmamem error (%d)\n", level); 7420 switch (level) { 7421 case 3: 7422 bus_dmamap_destroy(tag, *mapp); 7423 /* FALLTHROUGH */ 7424 case 2: 7425 bus_dmamem_unmap(tag, *vaddr, size); 7426 /* FALLTHROUGH */ 7427 case 1: 7428 bus_dmamem_free(tag, seg, *nseg); 7429 break; 7430 default: 7431 break; 7432 } 7433 7434 return -1; 7435 } 7436 7437 static void 7438 ahc_freedmamem(bus_dma_tag_t tag, int size, bus_dmamap_t map, void *vaddr, 7439 bus_dma_segment_t *seg, int nseg) 7440 { 7441 7442 bus_dmamap_unload(tag, map); 7443 bus_dmamap_destroy(tag, map); 7444 bus_dmamem_unmap(tag, vaddr, size); 7445 bus_dmamem_free(tag, seg, nseg); 7446 } 7447
Indexes created Sat Sep 20 22:09:52 GMT 2025