1 /* $NetBSD: atw.c,v 1.172 2021/09/21 14:42:01 christos Exp $ */ 2 3 /*- 4 * Copyright (c) 1998, 1999, 2000, 2002, 2003, 2004 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by David Young, by Jason R. Thorpe, and by Charles M. Hannum. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * Device driver for the ADMtek ADM8211 802.11 MAC/BBP. 34 */ 35 36 #include <sys/cdefs.h> 37 __KERNEL_RCSID(0, "$NetBSD: atw.c,v 1.172 2021/09/21 14:42:01 christos Exp $"); 38 39 40 #include <sys/param.h> 41 #include <sys/systm.h> 42 #include <sys/callout.h> 43 #include <sys/mbuf.h> 44 #include <sys/malloc.h> 45 #include <sys/kernel.h> 46 #include <sys/socket.h> 47 #include <sys/ioctl.h> 48 #include <sys/errno.h> 49 #include <sys/device.h> 50 #include <sys/kauth.h> 51 #include <sys/time.h> 52 #include <sys/proc.h> 53 #include <sys/atomic.h> 54 #include <lib/libkern/libkern.h> 55 56 #include <machine/endian.h> 57 58 #include <net/if.h> 59 #include <net/if_dl.h> 60 #include <net/if_media.h> 61 #include <net/if_ether.h> 62 63 #include <net80211/ieee80211_netbsd.h> 64 #include <net80211/ieee80211_var.h> 65 #include <net80211/ieee80211_radiotap.h> 66 67 #include <net/bpf.h> 68 69 #include <sys/bus.h> 70 #include <sys/intr.h> 71 72 #include <dev/ic/atwreg.h> 73 #include <dev/ic/rf3000reg.h> 74 #include <dev/ic/si4136reg.h> 75 #include <dev/ic/atwvar.h> 76 #include <dev/ic/smc93cx6var.h> 77 78 /* XXX TBD open questions 79 * 80 * 81 * When should I set DSSS PAD in reg 0x15 of RF3000? In 1-2Mbps 82 * modes only, or all modes (5.5-11 Mbps CCK modes, too?) Does the MAC 83 * handle this for me? 84 * 85 */ 86 /* device attachment 87 * 88 * print TOFS[012] 89 * 90 * device initialization 91 * 92 * clear ATW_FRCTL_MAXPSP to disable max power saving 93 * set ATW_TXBR_ALCUPDATE to enable ALC 94 * set TOFS[012]? (hope not) 95 * disable rx/tx 96 * set ATW_PAR_SWR (software reset) 97 * wait for ATW_PAR_SWR clear 98 * disable interrupts 99 * ack status register 100 * enable interrupts 101 * 102 * rx/tx initialization 103 * 104 * disable rx/tx w/ ATW_NAR_SR, ATW_NAR_ST 105 * allocate and init descriptor rings 106 * write ATW_PAR_DSL (descriptor skip length) 107 * write descriptor base addrs: ATW_TDBD, ATW_TDBP, write ATW_RDB 108 * write ATW_NAR_SQ for one/both transmit descriptor rings 109 * write ATW_NAR_SQ for one/both transmit descriptor rings 110 * enable rx/tx w/ ATW_NAR_SR, ATW_NAR_ST 111 * 112 * rx/tx end 113 * 114 * stop DMA 115 * disable rx/tx w/ ATW_NAR_SR, ATW_NAR_ST 116 * flush tx w/ ATW_NAR_HF 117 * 118 * scan 119 * 120 * initialize rx/tx 121 * 122 * BSS join: (re)association response 123 * 124 * set ATW_FRCTL_AID 125 * 126 * optimizations ??? 127 * 128 */ 129 130 #define ATW_REFSLAVE /* slavishly do what the reference driver does */ 131 132 int atw_pseudo_milli = 1; 133 int atw_magic_delay1 = 100 * 1000; 134 int atw_magic_delay2 = 100 * 1000; 135 /* more magic multi-millisecond delays (units: microseconds) */ 136 int atw_nar_delay = 20 * 1000; 137 int atw_magic_delay4 = 10 * 1000; 138 int atw_rf_delay1 = 10 * 1000; 139 int atw_rf_delay2 = 5 * 1000; 140 int atw_plcphd_delay = 2 * 1000; 141 int atw_bbp_io_enable_delay = 20 * 1000; 142 int atw_bbp_io_disable_delay = 2 * 1000; 143 int atw_writewep_delay = 1000; 144 int atw_beacon_len_adjust = 4; 145 int atw_dwelltime = 200; 146 int atw_xindiv2 = 0; 147 148 #ifdef ATW_DEBUG 149 int atw_debug = 0; 150 151 #define ATW_DPRINTF(x) if (atw_debug > 0) printf x 152 #define ATW_DPRINTF2(x) if (atw_debug > 1) printf x 153 #define ATW_DPRINTF3(x) if (atw_debug > 2) printf x 154 #define DPRINTF(sc, x) if ((sc)->sc_if.if_flags & IFF_DEBUG) printf x 155 #define DPRINTF2(sc, x) if ((sc)->sc_if.if_flags & IFF_DEBUG) ATW_DPRINTF2(x) 156 #define DPRINTF3(sc, x) if ((sc)->sc_if.if_flags & IFF_DEBUG) ATW_DPRINTF3(x) 157 158 static void atw_dump_pkt(struct ifnet *, struct mbuf *); 159 static void atw_print_regs(struct atw_softc *, const char *); 160 161 /* Note well: I never got atw_rf3000_read or atw_si4126_read to work. */ 162 # ifdef ATW_BBPDEBUG 163 static void atw_rf3000_print(struct atw_softc *); 164 static int atw_rf3000_read(struct atw_softc *sc, u_int, u_int *); 165 # endif /* ATW_BBPDEBUG */ 166 167 # ifdef ATW_SYNDEBUG 168 static void atw_si4126_print(struct atw_softc *); 169 static int atw_si4126_read(struct atw_softc *, u_int, u_int *); 170 # endif /* ATW_SYNDEBUG */ 171 #define __atwdebugused /* empty */ 172 #else 173 #define ATW_DPRINTF(x) 174 #define ATW_DPRINTF2(x) 175 #define ATW_DPRINTF3(x) 176 #define DPRINTF(sc, x) /* nothing */ 177 #define DPRINTF2(sc, x) /* nothing */ 178 #define DPRINTF3(sc, x) /* nothing */ 179 #define __atwdebugused __unused 180 #endif 181 182 /* ifnet methods */ 183 int atw_init(struct ifnet *); 184 int atw_ioctl(struct ifnet *, u_long, void *); 185 void atw_start(struct ifnet *); 186 void atw_stop(struct ifnet *, int); 187 void atw_watchdog(struct ifnet *); 188 189 /* Device attachment */ 190 void atw_attach(struct atw_softc *); 191 int atw_detach(struct atw_softc *); 192 static void atw_evcnt_attach(struct atw_softc *); 193 static void atw_evcnt_detach(struct atw_softc *); 194 195 /* Rx/Tx process */ 196 int atw_add_rxbuf(struct atw_softc *, int); 197 void atw_idle(struct atw_softc *, uint32_t); 198 void atw_rxdrain(struct atw_softc *); 199 void atw_txdrain(struct atw_softc *); 200 201 /* Device (de)activation and power state */ 202 void atw_reset(struct atw_softc *); 203 204 /* Interrupt handlers */ 205 void atw_softintr(void *); 206 void atw_linkintr(struct atw_softc *, uint32_t); 207 void atw_rxintr(struct atw_softc *); 208 void atw_txintr(struct atw_softc *, uint32_t); 209 210 /* 802.11 state machine */ 211 static int atw_newstate(struct ieee80211com *, enum ieee80211_state, int); 212 static void atw_next_scan(void *); 213 static void atw_recv_mgmt(struct ieee80211com *, struct mbuf *, 214 struct ieee80211_node *, int, int, uint32_t); 215 static int atw_tune(struct atw_softc *); 216 217 /* Device initialization */ 218 static void atw_bbp_io_init(struct atw_softc *); 219 static void atw_cfp_init(struct atw_softc *); 220 static void atw_cmdr_init(struct atw_softc *); 221 static void atw_ifs_init(struct atw_softc *); 222 static void atw_nar_init(struct atw_softc *); 223 static void atw_response_times_init(struct atw_softc *); 224 static void atw_rf_reset(struct atw_softc *); 225 static void atw_test1_init(struct atw_softc *); 226 static void atw_tofs0_init(struct atw_softc *); 227 static void atw_tofs2_init(struct atw_softc *); 228 static void atw_txlmt_init(struct atw_softc *); 229 static void atw_wcsr_init(struct atw_softc *); 230 231 /* Key management */ 232 static int atw_key_delete(struct ieee80211com *, const struct ieee80211_key *); 233 static int atw_key_set(struct ieee80211com *, const struct ieee80211_key *, 234 const uint8_t[IEEE80211_ADDR_LEN]); 235 static void atw_key_update_begin(struct ieee80211com *); 236 static void atw_key_update_end(struct ieee80211com *); 237 238 /* RAM/ROM utilities */ 239 static void atw_clear_sram(struct atw_softc *); 240 static void atw_write_sram(struct atw_softc *, u_int, uint8_t *, u_int); 241 static int atw_read_srom(struct atw_softc *); 242 243 /* BSS setup */ 244 static void atw_predict_beacon(struct atw_softc *); 245 static void atw_start_beacon(struct atw_softc *, int); 246 static void atw_write_bssid(struct atw_softc *); 247 static void atw_write_ssid(struct atw_softc *); 248 static void atw_write_sup_rates(struct atw_softc *); 249 static void atw_write_wep(struct atw_softc *); 250 251 /* Media */ 252 static int atw_media_change(struct ifnet *); 253 254 static void atw_filter_setup(struct atw_softc *); 255 256 /* 802.11 utilities */ 257 static uint64_t atw_get_tsft(struct atw_softc *); 258 static inline uint32_t atw_last_even_tsft(uint32_t, uint32_t, 259 uint32_t); 260 static struct ieee80211_node *atw_node_alloc(struct ieee80211_node_table *); 261 static void atw_node_free(struct ieee80211_node *); 262 263 /* 264 * Tuner/transceiver/modem 265 */ 266 static void atw_bbp_io_enable(struct atw_softc *, int); 267 268 /* RFMD RF3000 Baseband Processor */ 269 static int atw_rf3000_init(struct atw_softc *); 270 static int atw_rf3000_tune(struct atw_softc *, u_int); 271 static int atw_rf3000_write(struct atw_softc *, u_int, u_int); 272 273 /* Silicon Laboratories Si4126 RF/IF Synthesizer */ 274 static void atw_si4126_tune(struct atw_softc *, u_int); 275 static void atw_si4126_write(struct atw_softc *, u_int, u_int); 276 277 const struct atw_txthresh_tab atw_txthresh_tab_lo[] = ATW_TXTHRESH_TAB_LO_RATE; 278 const struct atw_txthresh_tab atw_txthresh_tab_hi[] = ATW_TXTHRESH_TAB_HI_RATE; 279 280 const char *atw_tx_state[] = { 281 "STOPPED", 282 "RUNNING - read descriptor", 283 "RUNNING - transmitting", 284 "RUNNING - filling fifo", /* XXX */ 285 "SUSPENDED", 286 "RUNNING -- write descriptor", 287 "RUNNING -- write last descriptor", 288 "RUNNING - fifo full" 289 }; 290 291 const char *atw_rx_state[] = { 292 "STOPPED", 293 "RUNNING - read descriptor", 294 "RUNNING - check this packet, pre-fetch next", 295 "RUNNING - wait for reception", 296 "SUSPENDED", 297 "RUNNING - write descriptor", 298 "RUNNING - flush fifo", 299 "RUNNING - fifo drain" 300 }; 301 302 static inline int 303 is_running(struct ifnet *ifp) 304 { 305 return (ifp->if_flags & (IFF_RUNNING | IFF_UP)) 306 == (IFF_RUNNING | IFF_UP); 307 } 308 309 int 310 atw_activate(device_t self, enum devact act) 311 { 312 struct atw_softc *sc = device_private(self); 313 314 switch (act) { 315 case DVACT_DEACTIVATE: 316 if_deactivate(&sc->sc_if); 317 return 0; 318 default: 319 return EOPNOTSUPP; 320 } 321 } 322 323 bool 324 atw_suspend(device_t self, const pmf_qual_t *qual) 325 { 326 struct atw_softc *sc = device_private(self); 327 328 atw_rxdrain(sc); 329 sc->sc_flags &= ~ATWF_WEP_SRAM_VALID; 330 331 return true; 332 } 333 334 /* Returns -1 on failure. */ 335 static int 336 atw_read_srom(struct atw_softc *sc) 337 { 338 struct seeprom_descriptor sd; 339 uint32_t test0, fail_bits; 340 341 (void)memset(&sd, 0, sizeof(sd)); 342 343 test0 = ATW_READ(sc, ATW_TEST0); 344 345 switch (sc->sc_rev) { 346 case ATW_REVISION_BA: 347 case ATW_REVISION_CA: 348 fail_bits = ATW_TEST0_EPNE; 349 break; 350 default: 351 fail_bits = ATW_TEST0_EPNE | ATW_TEST0_EPSNM; 352 break; 353 } 354 if ((test0 & fail_bits) != 0) { 355 aprint_error_dev(sc->sc_dev, "bad or missing/bad SROM\n"); 356 return -1; 357 } 358 359 switch (test0 & ATW_TEST0_EPTYP_MASK) { 360 case ATW_TEST0_EPTYP_93c66: 361 ATW_DPRINTF(("%s: 93c66 SROM\n", device_xname(sc->sc_dev))); 362 sc->sc_sromsz = 512; 363 sd.sd_chip = C56_66; 364 break; 365 case ATW_TEST0_EPTYP_93c46: 366 ATW_DPRINTF(("%s: 93c46 SROM\n", device_xname(sc->sc_dev))); 367 sc->sc_sromsz = 128; 368 sd.sd_chip = C46; 369 break; 370 default: 371 printf("%s: unknown SROM type %" __PRIuBITS "\n", 372 device_xname(sc->sc_dev), 373 __SHIFTOUT(test0, ATW_TEST0_EPTYP_MASK)); 374 return -1; 375 } 376 377 sc->sc_srom = malloc(sc->sc_sromsz, M_DEVBUF, M_WAITOK | M_ZERO); 378 379 /* ADM8211 has a single 32-bit register for controlling the 380 * 93cx6 SROM. Bit SRS enables the serial port. There is no 381 * "ready" bit. The ADM8211 input/output sense is the reverse 382 * of read_seeprom's. 383 */ 384 sd.sd_tag = sc->sc_st; 385 sd.sd_bsh = sc->sc_sh; 386 sd.sd_regsize = 4; 387 sd.sd_control_offset = ATW_SPR; 388 sd.sd_status_offset = ATW_SPR; 389 sd.sd_dataout_offset = ATW_SPR; 390 sd.sd_CK = ATW_SPR_SCLK; 391 sd.sd_CS = ATW_SPR_SCS; 392 sd.sd_DI = ATW_SPR_SDO; 393 sd.sd_DO = ATW_SPR_SDI; 394 sd.sd_MS = ATW_SPR_SRS; 395 sd.sd_RDY = 0; 396 397 if (!read_seeprom(&sd, sc->sc_srom, 0, sc->sc_sromsz/2)) { 398 aprint_error_dev(sc->sc_dev, "could not read SROM\n"); 399 free(sc->sc_srom, M_DEVBUF); 400 return -1; 401 } 402 #ifdef ATW_DEBUG 403 { 404 int i; 405 ATW_DPRINTF(("\nSerial EEPROM:\n\t")); 406 for (i = 0; i < sc->sc_sromsz/2; i = i + 1) { 407 if (((i % 8) == 0) && (i != 0)) { 408 ATW_DPRINTF(("\n\t")); 409 } 410 ATW_DPRINTF((" 0x%x", sc->sc_srom[i])); 411 } 412 ATW_DPRINTF(("\n")); 413 } 414 #endif /* ATW_DEBUG */ 415 return 0; 416 } 417 418 #ifdef ATW_DEBUG 419 static void 420 atw_print_regs(struct atw_softc *sc, const char *where) 421 { 422 #define PRINTREG(sc, reg) \ 423 ATW_DPRINTF2(("%s: reg[ " #reg " / %03x ] = %08x\n", \ 424 device_xname(sc->sc_dev), reg, ATW_READ(sc, reg))) 425 426 ATW_DPRINTF2(("%s: %s\n", device_xname(sc->sc_dev), where)); 427 428 PRINTREG(sc, ATW_PAR); 429 PRINTREG(sc, ATW_FRCTL); 430 PRINTREG(sc, ATW_TDR); 431 PRINTREG(sc, ATW_WTDP); 432 PRINTREG(sc, ATW_RDR); 433 PRINTREG(sc, ATW_WRDP); 434 PRINTREG(sc, ATW_RDB); 435 PRINTREG(sc, ATW_CSR3A); 436 PRINTREG(sc, ATW_TDBD); 437 PRINTREG(sc, ATW_TDBP); 438 PRINTREG(sc, ATW_STSR); 439 PRINTREG(sc, ATW_CSR5A); 440 PRINTREG(sc, ATW_NAR); 441 PRINTREG(sc, ATW_CSR6A); 442 PRINTREG(sc, ATW_IER); 443 PRINTREG(sc, ATW_CSR7A); 444 PRINTREG(sc, ATW_LPC); 445 PRINTREG(sc, ATW_TEST1); 446 PRINTREG(sc, ATW_SPR); 447 PRINTREG(sc, ATW_TEST0); 448 PRINTREG(sc, ATW_WCSR); 449 PRINTREG(sc, ATW_WPDR); 450 PRINTREG(sc, ATW_GPTMR); 451 PRINTREG(sc, ATW_GPIO); 452 PRINTREG(sc, ATW_BBPCTL); 453 PRINTREG(sc, ATW_SYNCTL); 454 PRINTREG(sc, ATW_PLCPHD); 455 PRINTREG(sc, ATW_MMIWADDR); 456 PRINTREG(sc, ATW_MMIRADDR1); 457 PRINTREG(sc, ATW_MMIRADDR2); 458 PRINTREG(sc, ATW_TXBR); 459 PRINTREG(sc, ATW_CSR15A); 460 PRINTREG(sc, ATW_ALCSTAT); 461 PRINTREG(sc, ATW_TOFS2); 462 PRINTREG(sc, ATW_CMDR); 463 PRINTREG(sc, ATW_PCIC); 464 PRINTREG(sc, ATW_PMCSR); 465 PRINTREG(sc, ATW_PAR0); 466 PRINTREG(sc, ATW_PAR1); 467 PRINTREG(sc, ATW_MAR0); 468 PRINTREG(sc, ATW_MAR1); 469 PRINTREG(sc, ATW_ATIMDA0); 470 PRINTREG(sc, ATW_ABDA1); 471 PRINTREG(sc, ATW_BSSID0); 472 PRINTREG(sc, ATW_TXLMT); 473 PRINTREG(sc, ATW_MIBCNT); 474 PRINTREG(sc, ATW_BCNT); 475 PRINTREG(sc, ATW_TSFTH); 476 PRINTREG(sc, ATW_TSC); 477 PRINTREG(sc, ATW_SYNRF); 478 PRINTREG(sc, ATW_BPLI); 479 PRINTREG(sc, ATW_CAP0); 480 PRINTREG(sc, ATW_CAP1); 481 PRINTREG(sc, ATW_RMD); 482 PRINTREG(sc, ATW_CFPP); 483 PRINTREG(sc, ATW_TOFS0); 484 PRINTREG(sc, ATW_TOFS1); 485 PRINTREG(sc, ATW_IFST); 486 PRINTREG(sc, ATW_RSPT); 487 PRINTREG(sc, ATW_TSFTL); 488 PRINTREG(sc, ATW_WEPCTL); 489 PRINTREG(sc, ATW_WESK); 490 PRINTREG(sc, ATW_WEPCNT); 491 PRINTREG(sc, ATW_MACTEST); 492 PRINTREG(sc, ATW_FER); 493 PRINTREG(sc, ATW_FEMR); 494 PRINTREG(sc, ATW_FPSR); 495 PRINTREG(sc, ATW_FFER); 496 #undef PRINTREG 497 } 498 #endif /* ATW_DEBUG */ 499 500 /* 501 * Finish attaching an ADMtek ADM8211 MAC. Called by bus-specific front-end. 502 */ 503 void 504 atw_attach(struct atw_softc *sc) 505 { 506 static const uint8_t empty_macaddr[IEEE80211_ADDR_LEN] = { 507 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 508 }; 509 struct ieee80211com *ic = &sc->sc_ic; 510 struct ifnet *ifp = &sc->sc_if; 511 int country_code, error, i, srom_major; 512 uint32_t reg; 513 static const char *type_strings[] = {"Intersil (not supported)", 514 "RFMD", "Marvel (not supported)"}; 515 516 pmf_self_suspensor_init(sc->sc_dev, &sc->sc_suspensor, &sc->sc_qual); 517 518 sc->sc_soft_ih = softint_establish(SOFTINT_NET, atw_softintr, sc); 519 if (sc->sc_soft_ih == NULL) { 520 aprint_error_dev(sc->sc_dev, "unable to establish softint\n"); 521 goto fail_0; 522 } 523 524 sc->sc_txth = atw_txthresh_tab_lo; 525 526 SIMPLEQ_INIT(&sc->sc_txfreeq); 527 SIMPLEQ_INIT(&sc->sc_txdirtyq); 528 529 #ifdef ATW_DEBUG 530 atw_print_regs(sc, "atw_attach"); 531 #endif /* ATW_DEBUG */ 532 533 /* 534 * Allocate the control data structures, and create and load the 535 * DMA map for it. 536 */ 537 if ((error = bus_dmamem_alloc(sc->sc_dmat, 538 sizeof(struct atw_control_data), PAGE_SIZE, 0, &sc->sc_cdseg, 539 1, &sc->sc_cdnseg, 0)) != 0) { 540 aprint_error_dev(sc->sc_dev, 541 "unable to allocate control data, error = %d\n", 542 error); 543 goto fail_0; 544 } 545 546 if ((error = bus_dmamem_map(sc->sc_dmat, &sc->sc_cdseg, sc->sc_cdnseg, 547 sizeof(struct atw_control_data), (void **)&sc->sc_control_data, 548 BUS_DMA_COHERENT)) != 0) { 549 aprint_error_dev(sc->sc_dev, 550 "unable to map control data, error = %d\n", 551 error); 552 goto fail_1; 553 } 554 555 if ((error = bus_dmamap_create(sc->sc_dmat, 556 sizeof(struct atw_control_data), 1, 557 sizeof(struct atw_control_data), 0, 0, &sc->sc_cddmamap)) != 0) { 558 aprint_error_dev(sc->sc_dev, 559 "unable to create control data DMA map, error = %d\n", 560 error); 561 goto fail_2; 562 } 563 564 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap, 565 sc->sc_control_data, sizeof(struct atw_control_data), NULL, 566 0)) != 0) { 567 aprint_error_dev(sc->sc_dev, 568 "unable to load control data DMA map, error = %d\n", error); 569 goto fail_3; 570 } 571 572 /* 573 * Create the transmit buffer DMA maps. 574 */ 575 sc->sc_ntxsegs = ATW_NTXSEGS; 576 for (i = 0; i < ATW_TXQUEUELEN; i++) { 577 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 578 sc->sc_ntxsegs, MCLBYTES, 0, 0, 579 &sc->sc_txsoft[i].txs_dmamap)) != 0) { 580 aprint_error_dev(sc->sc_dev, 581 "unable to create tx DMA map %d, error = %d\n", i, 582 error); 583 goto fail_4; 584 } 585 } 586 587 /* 588 * Create the receive buffer DMA maps. 589 */ 590 for (i = 0; i < ATW_NRXDESC; i++) { 591 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, 592 MCLBYTES, 0, 0, &sc->sc_rxsoft[i].rxs_dmamap)) != 0) { 593 aprint_error_dev(sc->sc_dev, 594 "unable to create rx DMA map %d, error = %d\n", i, 595 error); 596 goto fail_5; 597 } 598 } 599 for (i = 0; i < ATW_NRXDESC; i++) { 600 sc->sc_rxsoft[i].rxs_mbuf = NULL; 601 } 602 603 switch (sc->sc_rev) { 604 case ATW_REVISION_AB: 605 case ATW_REVISION_AF: 606 sc->sc_sramlen = ATW_SRAM_A_SIZE; 607 break; 608 case ATW_REVISION_BA: 609 case ATW_REVISION_CA: 610 sc->sc_sramlen = ATW_SRAM_B_SIZE; 611 break; 612 } 613 614 /* Reset the chip to a known state. */ 615 atw_reset(sc); 616 617 if (atw_read_srom(sc) == -1) 618 goto fail_5; 619 620 sc->sc_rftype = __SHIFTOUT(sc->sc_srom[ATW_SR_CSR20], 621 ATW_SR_RFTYPE_MASK); 622 623 sc->sc_bbptype = __SHIFTOUT(sc->sc_srom[ATW_SR_CSR20], 624 ATW_SR_BBPTYPE_MASK); 625 626 if (sc->sc_rftype >= __arraycount(type_strings)) { 627 aprint_error_dev(sc->sc_dev, "unknown RF\n"); 628 goto fail_5; 629 } 630 if (sc->sc_bbptype >= __arraycount(type_strings)) { 631 aprint_error_dev(sc->sc_dev, "unknown BBP\n"); 632 goto fail_5; 633 } 634 635 aprint_normal_dev(sc->sc_dev, "%s RF, %s BBP", 636 type_strings[sc->sc_rftype], type_strings[sc->sc_bbptype]); 637 638 /* XXX There exists a Linux driver which seems to use RFType = 0 for 639 * MARVEL. My bug, or theirs? 640 */ 641 642 reg = __SHIFTIN(sc->sc_rftype, ATW_SYNCTL_RFTYPE_MASK); 643 644 switch (sc->sc_rftype) { 645 case ATW_RFTYPE_INTERSIL: 646 reg |= ATW_SYNCTL_CS1; 647 break; 648 case ATW_RFTYPE_RFMD: 649 reg |= ATW_SYNCTL_CS0; 650 break; 651 case ATW_RFTYPE_MARVEL: 652 break; 653 } 654 655 sc->sc_synctl_rd = reg | ATW_SYNCTL_RD; 656 sc->sc_synctl_wr = reg | ATW_SYNCTL_WR; 657 658 reg = __SHIFTIN(sc->sc_bbptype, ATW_BBPCTL_TYPE_MASK); 659 660 switch (sc->sc_bbptype) { 661 case ATW_BBPTYPE_INTERSIL: 662 reg |= ATW_BBPCTL_TWI; 663 break; 664 case ATW_BBPTYPE_RFMD: 665 reg |= ATW_BBPCTL_RF3KADDR_ADDR | ATW_BBPCTL_NEGEDGE_DO | 666 ATW_BBPCTL_CCA_ACTLO; 667 break; 668 case ATW_BBPTYPE_MARVEL: 669 break; 670 case ATW_C_BBPTYPE_RFMD: 671 aprint_error_dev(sc->sc_dev, 672 "ADM8211C MAC/RFMD BBP not supported yet.\n"); 673 break; 674 } 675 676 sc->sc_bbpctl_wr = reg | ATW_BBPCTL_WR; 677 sc->sc_bbpctl_rd = reg | ATW_BBPCTL_RD; 678 679 /* 680 * From this point forward, the attachment cannot fail. A failure 681 * before this point releases all resources that may have been 682 * allocated. 683 */ 684 sc->sc_flags |= ATWF_ATTACHED; 685 686 ATW_DPRINTF((" SROM MAC %04x%04x%04x", 687 htole16(sc->sc_srom[ATW_SR_MAC00]), 688 htole16(sc->sc_srom[ATW_SR_MAC01]), 689 htole16(sc->sc_srom[ATW_SR_MAC10]))); 690 691 srom_major = __SHIFTOUT(sc->sc_srom[ATW_SR_FORMAT_VERSION], 692 ATW_SR_MAJOR_MASK); 693 694 if (srom_major < 2) 695 sc->sc_rf3000_options1 = 0; 696 else if (sc->sc_rev == ATW_REVISION_BA) { 697 sc->sc_rf3000_options1 = 698 __SHIFTOUT(sc->sc_srom[ATW_SR_CR28_CR03], 699 ATW_SR_CR28_MASK); 700 } else 701 sc->sc_rf3000_options1 = 0; 702 703 sc->sc_rf3000_options2 = __SHIFTOUT(sc->sc_srom[ATW_SR_CTRY_CR29], 704 ATW_SR_CR29_MASK); 705 706 country_code = __SHIFTOUT(sc->sc_srom[ATW_SR_CTRY_CR29], 707 ATW_SR_CTRY_MASK); 708 709 #define ADD_CHANNEL(_ic, _chan) do { \ 710 _ic->ic_channels[_chan].ic_flags = IEEE80211_CHAN_B; \ 711 _ic->ic_channels[_chan].ic_freq = \ 712 ieee80211_ieee2mhz(_chan, _ic->ic_channels[_chan].ic_flags);\ 713 } while (0) 714 715 /* Find available channels */ 716 switch (country_code) { 717 case COUNTRY_MMK2: /* 1-14 */ 718 ADD_CHANNEL(ic, 14); 719 /*FALLTHROUGH*/ 720 case COUNTRY_ETSI: /* 1-13 */ 721 for (i = 1; i <= 13; i++) 722 ADD_CHANNEL(ic, i); 723 break; 724 case COUNTRY_FCC: /* 1-11 */ 725 case COUNTRY_IC: /* 1-11 */ 726 for (i = 1; i <= 11; i++) 727 ADD_CHANNEL(ic, i); 728 break; 729 case COUNTRY_MMK: /* 14 */ 730 ADD_CHANNEL(ic, 14); 731 break; 732 case COUNTRY_FRANCE: /* 10-13 */ 733 for (i = 10; i <= 13; i++) 734 ADD_CHANNEL(ic, i); 735 break; 736 default: /* assume channels 10-11 */ 737 case COUNTRY_SPAIN: /* 10-11 */ 738 for (i = 10; i <= 11; i++) 739 ADD_CHANNEL(ic, i); 740 break; 741 } 742 743 /* Read the MAC address. */ 744 reg = ATW_READ(sc, ATW_PAR0); 745 ic->ic_myaddr[0] = __SHIFTOUT(reg, ATW_PAR0_PAB0_MASK); 746 ic->ic_myaddr[1] = __SHIFTOUT(reg, ATW_PAR0_PAB1_MASK); 747 ic->ic_myaddr[2] = __SHIFTOUT(reg, ATW_PAR0_PAB2_MASK); 748 ic->ic_myaddr[3] = __SHIFTOUT(reg, ATW_PAR0_PAB3_MASK); 749 reg = ATW_READ(sc, ATW_PAR1); 750 ic->ic_myaddr[4] = __SHIFTOUT(reg, ATW_PAR1_PAB4_MASK); 751 ic->ic_myaddr[5] = __SHIFTOUT(reg, ATW_PAR1_PAB5_MASK); 752 753 if (IEEE80211_ADDR_EQ(ic->ic_myaddr, empty_macaddr)) { 754 aprint_error_dev(sc->sc_dev, 755 "could not get mac address, attach failed\n"); 756 goto fail_5; 757 } 758 759 aprint_normal(" 802.11 address %s\n", ether_sprintf(ic->ic_myaddr)); 760 761 memcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ); 762 ifp->if_softc = sc; 763 ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST; 764 ifp->if_ioctl = atw_ioctl; 765 ifp->if_start = atw_start; 766 ifp->if_watchdog = atw_watchdog; 767 ifp->if_init = atw_init; 768 ifp->if_stop = atw_stop; 769 IFQ_SET_READY(&ifp->if_snd); 770 771 ic->ic_ifp = ifp; 772 ic->ic_phytype = IEEE80211_T_DS; 773 ic->ic_opmode = IEEE80211_M_STA; 774 ic->ic_caps = IEEE80211_C_PMGT | IEEE80211_C_IBSS | 775 IEEE80211_C_HOSTAP | IEEE80211_C_MONITOR; 776 777 ic->ic_sup_rates[IEEE80211_MODE_11B] = ieee80211_std_rateset_11b; 778 779 /* 780 * Call MI attach routines. 781 */ 782 783 if_initialize(ifp); 784 ieee80211_ifattach(ic); 785 /* Use common softint-based if_input */ 786 ifp->if_percpuq = if_percpuq_create(ifp); 787 if_register(ifp); 788 789 atw_evcnt_attach(sc); 790 791 sc->sc_newstate = ic->ic_newstate; 792 ic->ic_newstate = atw_newstate; 793 794 sc->sc_recv_mgmt = ic->ic_recv_mgmt; 795 ic->ic_recv_mgmt = atw_recv_mgmt; 796 797 sc->sc_node_free = ic->ic_node_free; 798 ic->ic_node_free = atw_node_free; 799 800 sc->sc_node_alloc = ic->ic_node_alloc; 801 ic->ic_node_alloc = atw_node_alloc; 802 803 ic->ic_crypto.cs_key_delete = atw_key_delete; 804 ic->ic_crypto.cs_key_set = atw_key_set; 805 ic->ic_crypto.cs_key_update_begin = atw_key_update_begin; 806 ic->ic_crypto.cs_key_update_end = atw_key_update_end; 807 808 /* possibly we should fill in our own sc_send_prresp, since 809 * the ADM8211 is probably sending probe responses in ad hoc 810 * mode. 811 */ 812 813 /* complete initialization */ 814 ieee80211_media_init(ic, atw_media_change, ieee80211_media_status); 815 callout_init(&sc->sc_scan_ch, 0); 816 817 bpf_attach2(ifp, DLT_IEEE802_11_RADIO, 818 sizeof(struct ieee80211_frame) + 64, &sc->sc_radiobpf); 819 820 memset(&sc->sc_rxtapu, 0, sizeof(sc->sc_rxtapu)); 821 sc->sc_rxtap.ar_ihdr.it_len = htole16(sizeof(sc->sc_rxtapu)); 822 sc->sc_rxtap.ar_ihdr.it_present = htole32(ATW_RX_RADIOTAP_PRESENT); 823 824 memset(&sc->sc_txtapu, 0, sizeof(sc->sc_txtapu)); 825 sc->sc_txtap.at_ihdr.it_len = htole16(sizeof(sc->sc_txtapu)); 826 sc->sc_txtap.at_ihdr.it_present = htole32(ATW_TX_RADIOTAP_PRESENT); 827 828 ieee80211_announce(ic); 829 return; 830 831 /* 832 * Free any resources we've allocated during the failed attach 833 * attempt. Do this in reverse order and fall through. 834 */ 835 fail_5: 836 for (i = 0; i < ATW_NRXDESC; i++) { 837 if (sc->sc_rxsoft[i].rxs_dmamap == NULL) 838 continue; 839 bus_dmamap_destroy(sc->sc_dmat, sc->sc_rxsoft[i].rxs_dmamap); 840 } 841 fail_4: 842 for (i = 0; i < ATW_TXQUEUELEN; i++) { 843 if (sc->sc_txsoft[i].txs_dmamap == NULL) 844 continue; 845 bus_dmamap_destroy(sc->sc_dmat, sc->sc_txsoft[i].txs_dmamap); 846 } 847 bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap); 848 fail_3: 849 bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap); 850 fail_2: 851 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data, 852 sizeof(struct atw_control_data)); 853 fail_1: 854 bus_dmamem_free(sc->sc_dmat, &sc->sc_cdseg, sc->sc_cdnseg); 855 fail_0: 856 if (sc->sc_soft_ih != NULL) { 857 softint_disestablish(sc->sc_soft_ih); 858 sc->sc_soft_ih = NULL; 859 } 860 } 861 862 static struct ieee80211_node * 863 atw_node_alloc(struct ieee80211_node_table *nt) 864 { 865 struct atw_softc *sc = (struct atw_softc *)nt->nt_ic->ic_ifp->if_softc; 866 struct ieee80211_node *ni = (*sc->sc_node_alloc)(nt); 867 868 DPRINTF(sc, ("%s: alloc node %p\n", device_xname(sc->sc_dev), ni)); 869 return ni; 870 } 871 872 static void 873 atw_node_free(struct ieee80211_node *ni) 874 { 875 struct atw_softc *sc = (struct atw_softc *)ni->ni_ic->ic_ifp->if_softc; 876 877 DPRINTF(sc, ("%s: freeing node %p %s\n", device_xname(sc->sc_dev), ni, 878 ether_sprintf(ni->ni_bssid))); 879 (*sc->sc_node_free)(ni); 880 } 881 882 883 static void 884 atw_test1_reset(struct atw_softc *sc) 885 { 886 switch (sc->sc_rev) { 887 case ATW_REVISION_BA: 888 if (1 /* XXX condition on transceiver type */) { 889 ATW_SET(sc, ATW_TEST1, ATW_TEST1_TESTMODE_MONITOR); 890 } 891 break; 892 case ATW_REVISION_CA: 893 ATW_CLR(sc, ATW_TEST1, ATW_TEST1_TESTMODE_MASK); 894 break; 895 default: 896 break; 897 } 898 } 899 900 /* 901 * atw_reset: 902 * 903 * Perform a soft reset on the ADM8211. 904 */ 905 void 906 atw_reset(struct atw_softc *sc) 907 { 908 int i; 909 uint32_t lpc __atwdebugused; 910 911 ATW_WRITE(sc, ATW_NAR, 0x0); 912 DELAY(atw_nar_delay); 913 914 /* Reference driver has a cryptic remark indicating that this might 915 * power-on the chip. I know that it turns off power-saving.... 916 */ 917 ATW_WRITE(sc, ATW_FRCTL, 0x0); 918 919 ATW_WRITE(sc, ATW_PAR, ATW_PAR_SWR); 920 921 for (i = 0; i < 50000 / atw_pseudo_milli; i++) { 922 if ((ATW_READ(sc, ATW_PAR) & ATW_PAR_SWR) == 0) 923 break; 924 DELAY(atw_pseudo_milli); 925 } 926 927 /* ... and then pause 100ms longer for good measure. */ 928 DELAY(atw_magic_delay1); 929 930 DPRINTF2(sc, ("%s: atw_reset %d iterations\n", device_xname(sc->sc_dev), i)); 931 932 if (ATW_ISSET(sc, ATW_PAR, ATW_PAR_SWR)) 933 aprint_error_dev(sc->sc_dev, "reset failed to complete\n"); 934 935 /* 936 * Initialize the PCI Access Register. 937 */ 938 sc->sc_busmode = ATW_PAR_PBL_8DW; 939 940 ATW_WRITE(sc, ATW_PAR, sc->sc_busmode); 941 DPRINTF(sc, ("%s: ATW_PAR %08x busmode %08x\n", device_xname(sc->sc_dev), 942 ATW_READ(sc, ATW_PAR), sc->sc_busmode)); 943 944 atw_test1_reset(sc); 945 946 /* Turn off maximum power saving, etc. */ 947 ATW_WRITE(sc, ATW_FRCTL, 0x0); 948 949 DELAY(atw_magic_delay2); 950 951 /* Recall EEPROM. */ 952 ATW_SET(sc, ATW_TEST0, ATW_TEST0_EPRLD); 953 954 DELAY(atw_magic_delay4); 955 956 lpc = ATW_READ(sc, ATW_LPC); 957 958 DPRINTF(sc, ("%s: ATW_LPC %#08x\n", __func__, lpc)); 959 960 /* A reset seems to affect the SRAM contents, so put them into 961 * a known state. 962 */ 963 atw_clear_sram(sc); 964 965 memset(sc->sc_bssid, 0xff, sizeof(sc->sc_bssid)); 966 } 967 968 static void 969 atw_clear_sram(struct atw_softc *sc) 970 { 971 memset(sc->sc_sram, 0, sizeof(sc->sc_sram)); 972 sc->sc_flags &= ~ATWF_WEP_SRAM_VALID; 973 /* XXX not for revision 0x20. */ 974 atw_write_sram(sc, 0, sc->sc_sram, sc->sc_sramlen); 975 } 976 977 /* TBD atw_init 978 * 979 * set MAC based on ic->ic_bss->myaddr 980 * write WEP keys 981 * set TX rate 982 */ 983 984 /* Tell the ADM8211 to raise ATW_INTR_LINKOFF if 7 beacon intervals pass 985 * without receiving a beacon with the preferred BSSID & SSID. 986 * atw_write_bssid & atw_write_ssid set the BSSID & SSID. 987 */ 988 static void 989 atw_wcsr_init(struct atw_softc *sc) 990 { 991 uint32_t wcsr; 992 993 wcsr = ATW_READ(sc, ATW_WCSR); 994 wcsr &= ~ATW_WCSR_BLN_MASK; 995 wcsr |= __SHIFTIN(7, ATW_WCSR_BLN_MASK); 996 /* We always want to wake up on link loss or TSFT out of range */ 997 wcsr |= ATW_WCSR_LSOE | ATW_WCSR_TSFTWE; 998 ATW_WRITE(sc, ATW_WCSR, wcsr); 999 1000 DPRINTF(sc, ("%s: %s reg[WCSR] = %08x\n", 1001 device_xname(sc->sc_dev), __func__, ATW_READ(sc, ATW_WCSR))); 1002 } 1003 1004 /* Turn off power management. Set Rx store-and-forward mode. */ 1005 static void 1006 atw_cmdr_init(struct atw_softc *sc) 1007 { 1008 uint32_t cmdr; 1009 cmdr = ATW_READ(sc, ATW_CMDR); 1010 cmdr &= ~ATW_CMDR_APM; 1011 cmdr |= ATW_CMDR_RTE; 1012 cmdr &= ~ATW_CMDR_DRT_MASK; 1013 cmdr |= ATW_CMDR_DRT_SF; 1014 1015 ATW_WRITE(sc, ATW_CMDR, cmdr); 1016 } 1017 1018 static void 1019 atw_tofs2_init(struct atw_softc *sc) 1020 { 1021 uint32_t tofs2; 1022 /* XXX this magic can probably be figured out from the RFMD docs */ 1023 #ifndef ATW_REFSLAVE 1024 tofs2 = __SHIFTIN(4, ATW_TOFS2_PWR1UP_MASK) | /* 8 ms = 4 * 2 ms */ 1025 __SHIFTIN(13, ATW_TOFS2_PWR0PAPE_MASK) | /* 13 us */ 1026 __SHIFTIN(8, ATW_TOFS2_PWR1PAPE_MASK) | /* 8 us */ 1027 __SHIFTIN(5, ATW_TOFS2_PWR0TRSW_MASK) | /* 5 us */ 1028 __SHIFTIN(12, ATW_TOFS2_PWR1TRSW_MASK) | /* 12 us */ 1029 __SHIFTIN(13, ATW_TOFS2_PWR0PE2_MASK) | /* 13 us */ 1030 __SHIFTIN(4, ATW_TOFS2_PWR1PE2_MASK) | /* 4 us */ 1031 __SHIFTIN(5, ATW_TOFS2_PWR0TXPE_MASK); /* 5 us */ 1032 #else 1033 /* XXX new magic from reference driver source */ 1034 tofs2 = __SHIFTIN(8, ATW_TOFS2_PWR1UP_MASK) | /* 8 ms = 4 * 2 ms */ 1035 __SHIFTIN(8, ATW_TOFS2_PWR0PAPE_MASK) | /* 8 us */ 1036 __SHIFTIN(1, ATW_TOFS2_PWR1PAPE_MASK) | /* 1 us */ 1037 __SHIFTIN(5, ATW_TOFS2_PWR0TRSW_MASK) | /* 5 us */ 1038 __SHIFTIN(12, ATW_TOFS2_PWR1TRSW_MASK) | /* 12 us */ 1039 __SHIFTIN(13, ATW_TOFS2_PWR0PE2_MASK) | /* 13 us */ 1040 __SHIFTIN(1, ATW_TOFS2_PWR1PE2_MASK) | /* 1 us */ 1041 __SHIFTIN(8, ATW_TOFS2_PWR0TXPE_MASK); /* 8 us */ 1042 #endif 1043 ATW_WRITE(sc, ATW_TOFS2, tofs2); 1044 } 1045 1046 static void 1047 atw_nar_init(struct atw_softc *sc) 1048 { 1049 ATW_WRITE(sc, ATW_NAR, ATW_NAR_SF | ATW_NAR_PB); 1050 } 1051 1052 static void 1053 atw_txlmt_init(struct atw_softc *sc) 1054 { 1055 ATW_WRITE(sc, ATW_TXLMT, __SHIFTIN(512, ATW_TXLMT_MTMLT_MASK) | 1056 __SHIFTIN(1, ATW_TXLMT_SRTYLIM_MASK)); 1057 } 1058 1059 static void 1060 atw_test1_init(struct atw_softc *sc) 1061 { 1062 uint32_t test1; 1063 1064 test1 = ATW_READ(sc, ATW_TEST1); 1065 test1 &= ~(ATW_TEST1_DBGREAD_MASK | ATW_TEST1_CONTROL); 1066 /* XXX magic 0x1 */ 1067 test1 |= __SHIFTIN(0x1, ATW_TEST1_DBGREAD_MASK) | ATW_TEST1_CONTROL; 1068 ATW_WRITE(sc, ATW_TEST1, test1); 1069 } 1070 1071 static void 1072 atw_rf_reset(struct atw_softc *sc) 1073 { 1074 /* XXX this resets an Intersil RF front-end? */ 1075 /* TBD condition on Intersil RFType? */ 1076 ATW_WRITE(sc, ATW_SYNRF, ATW_SYNRF_INTERSIL_EN); 1077 DELAY(atw_rf_delay1); 1078 ATW_WRITE(sc, ATW_SYNRF, 0); 1079 DELAY(atw_rf_delay2); 1080 } 1081 1082 /* Set 16 TU max duration for the contention-free period (CFP). */ 1083 static void 1084 atw_cfp_init(struct atw_softc *sc) 1085 { 1086 uint32_t cfpp; 1087 1088 cfpp = ATW_READ(sc, ATW_CFPP); 1089 cfpp &= ~ATW_CFPP_CFPMD; 1090 cfpp |= __SHIFTIN(16, ATW_CFPP_CFPMD); 1091 ATW_WRITE(sc, ATW_CFPP, cfpp); 1092 } 1093 1094 static void 1095 atw_tofs0_init(struct atw_softc *sc) 1096 { 1097 /* XXX I guess that the Cardbus clock is 22 MHz? 1098 * I am assuming that the role of ATW_TOFS0_USCNT is 1099 * to divide the bus clock to get a 1 MHz clock---the datasheet is not 1100 * very clear on this point. It says in the datasheet that it is 1101 * possible for the ADM8211 to accommodate bus speeds between 22 MHz 1102 * and 33 MHz; maybe this is the way? I see a binary-only driver write 1103 * these values. These values are also the power-on default. 1104 */ 1105 ATW_WRITE(sc, ATW_TOFS0, 1106 __SHIFTIN(22, ATW_TOFS0_USCNT_MASK) | 1107 ATW_TOFS0_TUCNT_MASK /* set all bits in TUCNT */); 1108 } 1109 1110 /* Initialize interframe spacing: 802.11b slot time, SIFS, DIFS, EIFS. */ 1111 static void 1112 atw_ifs_init(struct atw_softc *sc) 1113 { 1114 uint32_t ifst; 1115 /* XXX EIFS=0x64, SIFS=110 are used by the reference driver. 1116 * Go figure. 1117 */ 1118 ifst = __SHIFTIN(IEEE80211_DUR_DS_SLOT, ATW_IFST_SLOT_MASK) | 1119 __SHIFTIN(22 * 10 /* IEEE80211_DUR_DS_SIFS */ /* # of 22 MHz cycles */, 1120 ATW_IFST_SIFS_MASK) | 1121 __SHIFTIN(IEEE80211_DUR_DS_DIFS, ATW_IFST_DIFS_MASK) | 1122 __SHIFTIN(IEEE80211_DUR_DS_EIFS, ATW_IFST_EIFS_MASK); 1123 1124 ATW_WRITE(sc, ATW_IFST, ifst); 1125 } 1126 1127 static void 1128 atw_response_times_init(struct atw_softc *sc) 1129 { 1130 /* XXX More magic. Relates to ACK timing? The datasheet seems to 1131 * indicate that the MAC expects at least SIFS + MIRT microseconds 1132 * to pass after it transmits a frame that requires a response; 1133 * it waits at most SIFS + MART microseconds for the response. 1134 * Surely this is not the ACK timeout? 1135 */ 1136 ATW_WRITE(sc, ATW_RSPT, __SHIFTIN(0xffff, ATW_RSPT_MART_MASK) | 1137 __SHIFTIN(0xff, ATW_RSPT_MIRT_MASK)); 1138 } 1139 1140 /* Set up the MMI read/write addresses for the baseband. The Tx/Rx 1141 * engines read and write baseband registers after Rx and before 1142 * Tx, respectively. 1143 */ 1144 static void 1145 atw_bbp_io_init(struct atw_softc *sc) 1146 { 1147 uint32_t mmiraddr2; 1148 1149 /* XXX The reference driver does this, but is it *really* 1150 * necessary? 1151 */ 1152 switch (sc->sc_rev) { 1153 case ATW_REVISION_AB: 1154 case ATW_REVISION_AF: 1155 mmiraddr2 = 0x0; 1156 break; 1157 default: 1158 mmiraddr2 = ATW_READ(sc, ATW_MMIRADDR2); 1159 mmiraddr2 &= 1160 ~(ATW_MMIRADDR2_PROREXT | ATW_MMIRADDR2_PRORLEN_MASK); 1161 break; 1162 } 1163 1164 switch (sc->sc_bbptype) { 1165 case ATW_BBPTYPE_INTERSIL: 1166 ATW_WRITE(sc, ATW_MMIWADDR, ATW_MMIWADDR_INTERSIL); 1167 ATW_WRITE(sc, ATW_MMIRADDR1, ATW_MMIRADDR1_INTERSIL); 1168 mmiraddr2 |= ATW_MMIRADDR2_INTERSIL; 1169 break; 1170 case ATW_BBPTYPE_MARVEL: 1171 /* TBD find out the Marvel settings. */ 1172 break; 1173 case ATW_BBPTYPE_RFMD: 1174 default: 1175 ATW_WRITE(sc, ATW_MMIWADDR, ATW_MMIWADDR_RFMD); 1176 ATW_WRITE(sc, ATW_MMIRADDR1, ATW_MMIRADDR1_RFMD); 1177 mmiraddr2 |= ATW_MMIRADDR2_RFMD; 1178 break; 1179 } 1180 ATW_WRITE(sc, ATW_MMIRADDR2, mmiraddr2); 1181 ATW_WRITE(sc, ATW_MACTEST, ATW_MACTEST_MMI_USETXCLK); 1182 } 1183 1184 /* 1185 * atw_init: [ ifnet interface function ] 1186 * 1187 * Initialize the interface. Must be called at splnet(). 1188 */ 1189 int 1190 atw_init(struct ifnet *ifp) 1191 { 1192 struct atw_softc *sc = ifp->if_softc; 1193 struct ieee80211com *ic = &sc->sc_ic; 1194 struct atw_txsoft *txs; 1195 struct atw_rxsoft *rxs; 1196 int i, error = 0; 1197 1198 if (device_is_active(sc->sc_dev)) { 1199 /* 1200 * Cancel any pending I/O. 1201 */ 1202 atw_stop(ifp, 0); 1203 } else if (!pmf_device_subtree_resume(sc->sc_dev, &sc->sc_qual) || 1204 !device_is_active(sc->sc_dev)) 1205 return 0; 1206 1207 /* 1208 * Reset the chip to a known state. 1209 */ 1210 atw_reset(sc); 1211 1212 DPRINTF(sc, ("%s: channel %d freq %d flags 0x%04x\n", 1213 __func__, ieee80211_chan2ieee(ic, ic->ic_curchan), 1214 ic->ic_curchan->ic_freq, ic->ic_curchan->ic_flags)); 1215 1216 atw_wcsr_init(sc); 1217 1218 atw_cmdr_init(sc); 1219 1220 /* Set data rate for PLCP Signal field, 1Mbps = 10 x 100Kb/s. 1221 * 1222 * XXX Set transmit power for ATIM, RTS, Beacon. 1223 */ 1224 ATW_WRITE(sc, ATW_PLCPHD, __SHIFTIN(10, ATW_PLCPHD_SIGNAL_MASK) | 1225 __SHIFTIN(0xb0, ATW_PLCPHD_SERVICE_MASK)); 1226 1227 atw_tofs2_init(sc); 1228 1229 atw_nar_init(sc); 1230 1231 atw_txlmt_init(sc); 1232 1233 atw_test1_init(sc); 1234 1235 atw_rf_reset(sc); 1236 1237 atw_cfp_init(sc); 1238 1239 atw_tofs0_init(sc); 1240 1241 atw_ifs_init(sc); 1242 1243 /* XXX Fall asleep after one second of inactivity. 1244 * XXX A frame may only dribble in for 65536us. 1245 */ 1246 ATW_WRITE(sc, ATW_RMD, 1247 __SHIFTIN(1, ATW_RMD_PCNT) | __SHIFTIN(0xffff, ATW_RMD_RMRD_MASK)); 1248 1249 atw_response_times_init(sc); 1250 1251 atw_bbp_io_init(sc); 1252 1253 ATW_WRITE(sc, ATW_STSR, 0xffffffff); 1254 1255 if ((error = atw_rf3000_init(sc)) != 0) 1256 goto out; 1257 1258 ATW_WRITE(sc, ATW_PAR, sc->sc_busmode); 1259 DPRINTF(sc, ("%s: ATW_PAR %08x busmode %08x\n", device_xname(sc->sc_dev), 1260 ATW_READ(sc, ATW_PAR), sc->sc_busmode)); 1261 1262 /* 1263 * Initialize the transmit descriptor ring. 1264 */ 1265 memset(sc->sc_txdescs, 0, sizeof(sc->sc_txdescs)); 1266 for (i = 0; i < ATW_NTXDESC; i++) { 1267 sc->sc_txdescs[i].at_ctl = 0; 1268 /* no transmit chaining */ 1269 sc->sc_txdescs[i].at_flags = 0 /* ATW_TXFLAG_TCH */; 1270 sc->sc_txdescs[i].at_buf2 = 1271 htole32(ATW_CDTXADDR(sc, ATW_NEXTTX(i))); 1272 } 1273 /* use ring mode */ 1274 sc->sc_txdescs[ATW_NTXDESC - 1].at_flags |= htole32(ATW_TXFLAG_TER); 1275 ATW_CDTXSYNC(sc, 0, ATW_NTXDESC, 1276 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 1277 sc->sc_txfree = ATW_NTXDESC; 1278 sc->sc_txnext = 0; 1279 1280 /* 1281 * Initialize the transmit job descriptors. 1282 */ 1283 SIMPLEQ_INIT(&sc->sc_txfreeq); 1284 SIMPLEQ_INIT(&sc->sc_txdirtyq); 1285 for (i = 0; i < ATW_TXQUEUELEN; i++) { 1286 txs = &sc->sc_txsoft[i]; 1287 txs->txs_mbuf = NULL; 1288 SIMPLEQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q); 1289 } 1290 1291 /* 1292 * Initialize the receive descriptor and receive job 1293 * descriptor rings. 1294 */ 1295 for (i = 0; i < ATW_NRXDESC; i++) { 1296 rxs = &sc->sc_rxsoft[i]; 1297 if (rxs->rxs_mbuf == NULL) { 1298 if ((error = atw_add_rxbuf(sc, i)) != 0) { 1299 aprint_error_dev(sc->sc_dev, 1300 "unable to allocate or map rx buffer %d, " 1301 "error = %d\n", i, error); 1302 /* 1303 * XXX Should attempt to run with fewer receive 1304 * XXX buffers instead of just failing. 1305 */ 1306 atw_rxdrain(sc); 1307 goto out; 1308 } 1309 } else 1310 atw_init_rxdesc(sc, i); 1311 } 1312 sc->sc_rxptr = 0; 1313 1314 /* 1315 * Initialize the interrupt mask and enable interrupts. 1316 */ 1317 /* normal interrupts */ 1318 sc->sc_inten = ATW_INTR_TCI | ATW_INTR_TDU | ATW_INTR_RCI | 1319 ATW_INTR_NISS | ATW_INTR_LINKON | ATW_INTR_BCNTC; 1320 1321 /* abnormal interrupts */ 1322 sc->sc_inten |= ATW_INTR_TPS | ATW_INTR_TLT | ATW_INTR_TRT | 1323 ATW_INTR_TUF | ATW_INTR_RDU | ATW_INTR_RPS | ATW_INTR_AISS | 1324 ATW_INTR_FBE | ATW_INTR_LINKOFF | ATW_INTR_TSFTF | ATW_INTR_TSCZ; 1325 1326 sc->sc_linkint_mask = ATW_INTR_LINKON | ATW_INTR_LINKOFF | 1327 ATW_INTR_BCNTC | ATW_INTR_TSFTF | ATW_INTR_TSCZ; 1328 sc->sc_rxint_mask = ATW_INTR_RCI | ATW_INTR_RDU; 1329 sc->sc_txint_mask = ATW_INTR_TCI | ATW_INTR_TUF | ATW_INTR_TLT | 1330 ATW_INTR_TRT; 1331 1332 sc->sc_linkint_mask &= sc->sc_inten; 1333 sc->sc_rxint_mask &= sc->sc_inten; 1334 sc->sc_txint_mask &= sc->sc_inten; 1335 1336 ATW_WRITE(sc, ATW_IER, sc->sc_inten); 1337 ATW_WRITE(sc, ATW_STSR, 0xffffffff); 1338 1339 DPRINTF(sc, ("%s: ATW_IER %08x, inten %08x\n", 1340 device_xname(sc->sc_dev), ATW_READ(sc, ATW_IER), sc->sc_inten)); 1341 1342 /* 1343 * Give the transmit and receive rings to the ADM8211. 1344 */ 1345 ATW_WRITE(sc, ATW_RDB, ATW_CDRXADDR(sc, sc->sc_rxptr)); 1346 ATW_WRITE(sc, ATW_TDBD, ATW_CDTXADDR(sc, sc->sc_txnext)); 1347 1348 sc->sc_txthresh = 0; 1349 sc->sc_opmode = ATW_NAR_SR | ATW_NAR_ST | 1350 sc->sc_txth[sc->sc_txthresh].txth_opmode; 1351 1352 /* common 802.11 configuration */ 1353 ic->ic_flags &= ~IEEE80211_F_IBSSON; 1354 switch (ic->ic_opmode) { 1355 case IEEE80211_M_STA: 1356 break; 1357 case IEEE80211_M_AHDEMO: /* XXX */ 1358 case IEEE80211_M_IBSS: 1359 ic->ic_flags |= IEEE80211_F_IBSSON; 1360 /*FALLTHROUGH*/ 1361 case IEEE80211_M_HOSTAP: /* XXX */ 1362 break; 1363 case IEEE80211_M_MONITOR: /* XXX */ 1364 break; 1365 } 1366 1367 switch (ic->ic_opmode) { 1368 case IEEE80211_M_AHDEMO: 1369 case IEEE80211_M_HOSTAP: 1370 #ifndef IEEE80211_NO_HOSTAP 1371 ic->ic_bss->ni_intval = ic->ic_lintval; 1372 ic->ic_bss->ni_rssi = 0; 1373 ic->ic_bss->ni_rstamp = 0; 1374 #endif /* !IEEE80211_NO_HOSTAP */ 1375 break; 1376 default: /* XXX */ 1377 break; 1378 } 1379 1380 sc->sc_wepctl = 0; 1381 1382 atw_write_ssid(sc); 1383 atw_write_sup_rates(sc); 1384 atw_write_wep(sc); 1385 1386 ic->ic_state = IEEE80211_S_INIT; 1387 1388 /* 1389 * Set the receive filter. This will start the transmit and 1390 * receive processes. 1391 */ 1392 atw_filter_setup(sc); 1393 1394 /* 1395 * Start the receive process. 1396 */ 1397 ATW_WRITE(sc, ATW_RDR, 0x1); 1398 1399 /* 1400 * Note that the interface is now running. 1401 */ 1402 ifp->if_flags |= IFF_RUNNING; 1403 1404 /* send no beacons, yet. */ 1405 atw_start_beacon(sc, 0); 1406 1407 if (ic->ic_opmode == IEEE80211_M_MONITOR) 1408 error = ieee80211_new_state(ic, IEEE80211_S_RUN, -1); 1409 else 1410 error = ieee80211_new_state(ic, IEEE80211_S_SCAN, -1); 1411 out: 1412 if (error) { 1413 ifp->if_flags &= ~IFF_RUNNING; 1414 sc->sc_tx_timer = 0; 1415 ifp->if_timer = 0; 1416 printf("%s: interface not running\n", device_xname(sc->sc_dev)); 1417 } 1418 #ifdef ATW_DEBUG 1419 atw_print_regs(sc, "end of init"); 1420 #endif /* ATW_DEBUG */ 1421 1422 return (error); 1423 } 1424 1425 /* enable == 1: host control of RF3000/Si4126 through ATW_SYNCTL. 1426 * 0: MAC control of RF3000/Si4126. 1427 * 1428 * Applies power, or selects RF front-end? Sets reset condition. 1429 * 1430 * TBD support non-RFMD BBP, non-SiLabs synth. 1431 */ 1432 static void 1433 atw_bbp_io_enable(struct atw_softc *sc, int enable) 1434 { 1435 if (enable) { 1436 ATW_WRITE(sc, ATW_SYNRF, 1437 ATW_SYNRF_SELRF | ATW_SYNRF_PE1 | ATW_SYNRF_PHYRST); 1438 DELAY(atw_bbp_io_enable_delay); 1439 } else { 1440 ATW_WRITE(sc, ATW_SYNRF, 0); 1441 DELAY(atw_bbp_io_disable_delay); /* shorter for some reason */ 1442 } 1443 } 1444 1445 static int 1446 atw_tune(struct atw_softc *sc) 1447 { 1448 int rc; 1449 u_int chan; 1450 struct ieee80211com *ic = &sc->sc_ic; 1451 1452 chan = ieee80211_chan2ieee(ic, ic->ic_curchan); 1453 if (chan == IEEE80211_CHAN_ANY) 1454 panic("%s: chan == IEEE80211_CHAN_ANY\n", __func__); 1455 1456 if (chan == sc->sc_cur_chan) 1457 return 0; 1458 1459 DPRINTF(sc, ("%s: chan %d -> %d\n", device_xname(sc->sc_dev), 1460 sc->sc_cur_chan, chan)); 1461 1462 atw_idle(sc, ATW_NAR_SR | ATW_NAR_ST); 1463 1464 atw_si4126_tune(sc, chan); 1465 if ((rc = atw_rf3000_tune(sc, chan)) != 0) 1466 printf("%s: failed to tune channel %d\n", device_xname(sc->sc_dev), 1467 chan); 1468 1469 ATW_WRITE(sc, ATW_NAR, sc->sc_opmode); 1470 DELAY(atw_nar_delay); 1471 ATW_WRITE(sc, ATW_RDR, 0x1); 1472 1473 if (rc == 0) { 1474 sc->sc_cur_chan = chan; 1475 sc->sc_rxtap.ar_chan_freq = sc->sc_txtap.at_chan_freq = 1476 htole16(ic->ic_curchan->ic_freq); 1477 sc->sc_rxtap.ar_chan_flags = sc->sc_txtap.at_chan_flags = 1478 htole16(ic->ic_curchan->ic_flags); 1479 } 1480 1481 return rc; 1482 } 1483 1484 #ifdef ATW_SYNDEBUG 1485 static void 1486 atw_si4126_print(struct atw_softc *sc) 1487 { 1488 struct ifnet *ifp = &sc->sc_if; 1489 u_int addr, val; 1490 1491 val = 0; 1492 1493 if (atw_debug < 3 || (ifp->if_flags & IFF_DEBUG) == 0) 1494 return; 1495 1496 for (addr = 0; addr <= 8; addr++) { 1497 printf("%s: synth[%d] = ", device_xname(sc->sc_dev), addr); 1498 if (atw_si4126_read(sc, addr, &val) == 0) { 1499 printf("<unknown> (quitting print-out)\n"); 1500 break; 1501 } 1502 printf("%05x\n", val); 1503 } 1504 } 1505 #endif /* ATW_SYNDEBUG */ 1506 1507 /* Tune to channel chan by adjusting the Si4126 RF/IF synthesizer. 1508 * 1509 * The RF/IF synthesizer produces two reference frequencies for 1510 * the RF2948B transceiver. The first frequency the RF2948B requires 1511 * is two times the so-called "intermediate frequency" (IF). Since 1512 * a SAW filter on the radio fixes the IF at 374 MHz, I program the 1513 * Si4126 to generate IF LO = 374 MHz x 2 = 748 MHz. The second 1514 * frequency required by the transceiver is the radio frequency 1515 * (RF). This is a superheterodyne transceiver; for f(chan) the 1516 * center frequency of the channel we are tuning, RF = f(chan) - 1517 * IF. 1518 * 1519 * XXX I am told by SiLabs that the Si4126 will accept a broader range 1520 * of XIN than the 2-25 MHz mentioned by the datasheet, even *without* 1521 * XINDIV2 = 1. I've tried this (it is necessary to double R) and it 1522 * works, but I have still programmed for XINDIV2 = 1 to be safe. 1523 */ 1524 static void 1525 atw_si4126_tune(struct atw_softc *sc, u_int chan) 1526 { 1527 u_int mhz; 1528 u_int R; 1529 uint32_t gpio; 1530 uint16_t gain; 1531 1532 #ifdef ATW_SYNDEBUG 1533 atw_si4126_print(sc); 1534 #endif /* ATW_SYNDEBUG */ 1535 1536 if (chan == 14) 1537 mhz = 2484; 1538 else 1539 mhz = 2412 + 5 * (chan - 1); 1540 1541 /* Tune IF to 748 MHz to suit the IF LO input of the 1542 * RF2494B, which is 2 x IF. No need to set an IF divider 1543 * because an IF in 526 MHz - 952 MHz is allowed. 1544 * 1545 * XIN is 44.000 MHz, so divide it by two to get allowable 1546 * range of 2-25 MHz. SiLabs tells me that this is not 1547 * strictly necessary. 1548 */ 1549 1550 if (atw_xindiv2) 1551 R = 44; 1552 else 1553 R = 88; 1554 1555 /* Power-up RF, IF synthesizers. */ 1556 atw_si4126_write(sc, SI4126_POWER, 1557 SI4126_POWER_PDIB | SI4126_POWER_PDRB); 1558 1559 /* set LPWR, too? */ 1560 atw_si4126_write(sc, SI4126_MAIN, 1561 (atw_xindiv2) ? SI4126_MAIN_XINDIV2 : 0); 1562 1563 /* Set the phase-locked loop gain. If RF2 N > 2047, then 1564 * set KP2 to 1. 1565 * 1566 * REFDIF This is different from the reference driver, which 1567 * always sets SI4126_GAIN to 0. 1568 */ 1569 gain = __SHIFTIN(((mhz - 374) > 2047) ? 1 : 0, SI4126_GAIN_KP2_MASK); 1570 1571 atw_si4126_write(sc, SI4126_GAIN, gain); 1572 1573 /* XIN = 44 MHz. 1574 * 1575 * If XINDIV2 = 1, IF = N/(2 * R) * XIN. I choose N = 1496, 1576 * R = 44 so that 1496/(2 * 44) * 44 MHz = 748 MHz. 1577 * 1578 * If XINDIV2 = 0, IF = N/R * XIN. I choose N = 1496, R = 88 1579 * so that 1496/88 * 44 MHz = 748 MHz. 1580 */ 1581 atw_si4126_write(sc, SI4126_IFN, 1496); 1582 1583 atw_si4126_write(sc, SI4126_IFR, R); 1584 1585 #ifndef ATW_REFSLAVE 1586 /* Set RF1 arbitrarily. DO NOT configure RF1 after RF2, because 1587 * then RF1 becomes the active RF synthesizer, even on the Si4126, 1588 * which has no RF1! 1589 */ 1590 atw_si4126_write(sc, SI4126_RF1R, R); 1591 1592 atw_si4126_write(sc, SI4126_RF1N, mhz - 374); 1593 #endif 1594 1595 /* N/R * XIN = RF. XIN = 44 MHz. We desire RF = mhz - IF, 1596 * where IF = 374 MHz. Let's divide XIN to 1 MHz. So R = 44. 1597 * Now let's multiply it to mhz. So mhz - IF = N. 1598 */ 1599 atw_si4126_write(sc, SI4126_RF2R, R); 1600 1601 atw_si4126_write(sc, SI4126_RF2N, mhz - 374); 1602 1603 /* wait 100us from power-up for RF, IF to settle */ 1604 DELAY(100); 1605 1606 gpio = ATW_READ(sc, ATW_GPIO); 1607 gpio &= ~(ATW_GPIO_EN_MASK | ATW_GPIO_O_MASK | ATW_GPIO_I_MASK); 1608 gpio |= __SHIFTIN(1, ATW_GPIO_EN_MASK); 1609 1610 if ((sc->sc_if.if_flags & IFF_LINK1) != 0 && chan != 14) { 1611 /* Set a Prism RF front-end to a special mode for channel 14? 1612 * 1613 * Apparently the SMC2635W needs this, although I don't think 1614 * it has a Prism RF. 1615 */ 1616 gpio |= __SHIFTIN(1, ATW_GPIO_O_MASK); 1617 } 1618 ATW_WRITE(sc, ATW_GPIO, gpio); 1619 1620 #ifdef ATW_SYNDEBUG 1621 atw_si4126_print(sc); 1622 #endif /* ATW_SYNDEBUG */ 1623 } 1624 1625 /* Baseline initialization of RF3000 BBP: set CCA mode and enable antenna 1626 * diversity. 1627 * 1628 * !!! 1629 * !!! Call this w/ Tx/Rx suspended, atw_idle(, ATW_NAR_ST|ATW_NAR_SR). 1630 * !!! 1631 */ 1632 static int 1633 atw_rf3000_init(struct atw_softc *sc) 1634 { 1635 int rc = 0; 1636 1637 atw_bbp_io_enable(sc, 1); 1638 1639 /* CCA is acquisition sensitive */ 1640 rc = atw_rf3000_write(sc, RF3000_CCACTL, 1641 __SHIFTIN(RF3000_CCACTL_MODE_BOTH, RF3000_CCACTL_MODE_MASK)); 1642 1643 if (rc != 0) 1644 goto out; 1645 1646 /* enable diversity */ 1647 rc = atw_rf3000_write(sc, RF3000_DIVCTL, RF3000_DIVCTL_ENABLE); 1648 1649 if (rc != 0) 1650 goto out; 1651 1652 /* sensible setting from a binary-only driver */ 1653 rc = atw_rf3000_write(sc, RF3000_GAINCTL, 1654 __SHIFTIN(0x1d, RF3000_GAINCTL_TXVGC_MASK)); 1655 1656 if (rc != 0) 1657 goto out; 1658 1659 /* magic from a binary-only driver */ 1660 rc = atw_rf3000_write(sc, RF3000_LOGAINCAL, 1661 __SHIFTIN(0x38, RF3000_LOGAINCAL_CAL_MASK)); 1662 1663 if (rc != 0) 1664 goto out; 1665 1666 rc = atw_rf3000_write(sc, RF3000_HIGAINCAL, RF3000_HIGAINCAL_DSSSPAD); 1667 1668 if (rc != 0) 1669 goto out; 1670 1671 /* XXX Reference driver remarks that Abocom sets this to 50. 1672 * Meaning 0x50, I think.... 50 = 0x32, which would set a bit 1673 * in the "reserved" area of register RF3000_OPTIONS1. 1674 */ 1675 rc = atw_rf3000_write(sc, RF3000_OPTIONS1, sc->sc_rf3000_options1); 1676 1677 if (rc != 0) 1678 goto out; 1679 1680 rc = atw_rf3000_write(sc, RF3000_OPTIONS2, sc->sc_rf3000_options2); 1681 1682 if (rc != 0) 1683 goto out; 1684 1685 out: 1686 atw_bbp_io_enable(sc, 0); 1687 return rc; 1688 } 1689 1690 #ifdef ATW_BBPDEBUG 1691 static void 1692 atw_rf3000_print(struct atw_softc *sc) 1693 { 1694 struct ifnet *ifp = &sc->sc_if; 1695 u_int addr, val; 1696 1697 if (atw_debug < 3 || (ifp->if_flags & IFF_DEBUG) == 0) 1698 return; 1699 1700 for (addr = 0x01; addr <= 0x15; addr++) { 1701 printf("%s: bbp[%d] = \n", device_xname(sc->sc_dev), addr); 1702 if (atw_rf3000_read(sc, addr, &val) != 0) { 1703 printf("<unknown> (quitting print-out)\n"); 1704 break; 1705 } 1706 printf("%08x\n", val); 1707 } 1708 } 1709 #endif /* ATW_BBPDEBUG */ 1710 1711 /* Set the power settings on the BBP for channel `chan'. */ 1712 static int 1713 atw_rf3000_tune(struct atw_softc *sc, u_int chan) 1714 { 1715 int rc = 0; 1716 uint32_t reg; 1717 uint16_t txpower, lpf_cutoff, lna_gs_thresh; 1718 1719 txpower = sc->sc_srom[ATW_SR_TXPOWER(chan)]; 1720 lpf_cutoff = sc->sc_srom[ATW_SR_LPF_CUTOFF(chan)]; 1721 lna_gs_thresh = sc->sc_srom[ATW_SR_LNA_GS_THRESH(chan)]; 1722 1723 /* odd channels: LSB, even channels: MSB */ 1724 if (chan % 2 == 1) { 1725 txpower &= 0xFF; 1726 lpf_cutoff &= 0xFF; 1727 lna_gs_thresh &= 0xFF; 1728 } else { 1729 txpower >>= 8; 1730 lpf_cutoff >>= 8; 1731 lna_gs_thresh >>= 8; 1732 } 1733 1734 #ifdef ATW_BBPDEBUG 1735 atw_rf3000_print(sc); 1736 #endif /* ATW_BBPDEBUG */ 1737 1738 DPRINTF(sc, ("%s: chan %d txpower %02x, lpf_cutoff %02x, " 1739 "lna_gs_thresh %02x\n", 1740 device_xname(sc->sc_dev), chan, txpower, lpf_cutoff, lna_gs_thresh)); 1741 1742 atw_bbp_io_enable(sc, 1); 1743 1744 if ((rc = atw_rf3000_write(sc, RF3000_GAINCTL, 1745 __SHIFTIN(txpower, RF3000_GAINCTL_TXVGC_MASK))) != 0) 1746 goto out; 1747 1748 if ((rc = atw_rf3000_write(sc, RF3000_LOGAINCAL, lpf_cutoff)) != 0) 1749 goto out; 1750 1751 if ((rc = atw_rf3000_write(sc, RF3000_HIGAINCAL, lna_gs_thresh)) != 0) 1752 goto out; 1753 1754 rc = atw_rf3000_write(sc, RF3000_OPTIONS1, 0x0); 1755 1756 if (rc != 0) 1757 goto out; 1758 1759 rc = atw_rf3000_write(sc, RF3000_OPTIONS2, RF3000_OPTIONS2_LNAGS_DELAY); 1760 1761 if (rc != 0) 1762 goto out; 1763 1764 #ifdef ATW_BBPDEBUG 1765 atw_rf3000_print(sc); 1766 #endif /* ATW_BBPDEBUG */ 1767 1768 out: 1769 atw_bbp_io_enable(sc, 0); 1770 1771 /* set beacon, rts, atim transmit power */ 1772 reg = ATW_READ(sc, ATW_PLCPHD); 1773 reg &= ~ATW_PLCPHD_SERVICE_MASK; 1774 reg |= __SHIFTIN(__SHIFTIN(txpower, RF3000_GAINCTL_TXVGC_MASK), 1775 ATW_PLCPHD_SERVICE_MASK); 1776 ATW_WRITE(sc, ATW_PLCPHD, reg); 1777 DELAY(atw_plcphd_delay); 1778 1779 return rc; 1780 } 1781 1782 /* Write a register on the RF3000 baseband processor using the 1783 * registers provided by the ADM8211 for this purpose. 1784 * 1785 * Return 0 on success. 1786 */ 1787 static int 1788 atw_rf3000_write(struct atw_softc *sc, u_int addr, u_int val) 1789 { 1790 uint32_t reg; 1791 int i; 1792 1793 reg = sc->sc_bbpctl_wr | 1794 __SHIFTIN(val & 0xff, ATW_BBPCTL_DATA_MASK) | 1795 __SHIFTIN(addr & 0x7f, ATW_BBPCTL_ADDR_MASK); 1796 1797 for (i = 20000 / atw_pseudo_milli; --i >= 0; ) { 1798 ATW_WRITE(sc, ATW_BBPCTL, reg); 1799 DELAY(2 * atw_pseudo_milli); 1800 if (ATW_ISSET(sc, ATW_BBPCTL, ATW_BBPCTL_WR) == 0) 1801 break; 1802 } 1803 1804 if (i < 0) { 1805 printf("%s: BBPCTL still busy\n", device_xname(sc->sc_dev)); 1806 return ETIMEDOUT; 1807 } 1808 return 0; 1809 } 1810 1811 /* Read a register on the RF3000 baseband processor using the registers 1812 * the ADM8211 provides for this purpose. 1813 * 1814 * The 7-bit register address is addr. Record the 8-bit data in the register 1815 * in *val. 1816 * 1817 * Return 0 on success. 1818 * 1819 * XXX This does not seem to work. The ADM8211 must require more or 1820 * different magic to read the chip than to write it. Possibly some 1821 * of the magic I have derived from a binary-only driver concerns 1822 * the "chip address" (see the RF3000 manual). 1823 */ 1824 #ifdef ATW_BBPDEBUG 1825 static int 1826 atw_rf3000_read(struct atw_softc *sc, u_int addr, u_int *val) 1827 { 1828 uint32_t reg; 1829 int i; 1830 1831 for (i = 1000; --i >= 0; ) { 1832 if (ATW_ISSET(sc, ATW_BBPCTL, ATW_BBPCTL_RD | ATW_BBPCTL_WR) 1833 == 0) 1834 break; 1835 DELAY(100); 1836 } 1837 1838 if (i < 0) { 1839 printf("%s: start atw_rf3000_read, BBPCTL busy\n", 1840 device_xname(sc->sc_dev)); 1841 return ETIMEDOUT; 1842 } 1843 1844 reg = sc->sc_bbpctl_rd | __SHIFTIN(addr & 0x7f, ATW_BBPCTL_ADDR_MASK); 1845 1846 ATW_WRITE(sc, ATW_BBPCTL, reg); 1847 1848 for (i = 1000; --i >= 0; ) { 1849 DELAY(100); 1850 if (ATW_ISSET(sc, ATW_BBPCTL, ATW_BBPCTL_RD) == 0) 1851 break; 1852 } 1853 1854 ATW_CLR(sc, ATW_BBPCTL, ATW_BBPCTL_RD); 1855 1856 if (i < 0) { 1857 printf("%s: atw_rf3000_read wrote %08x; BBPCTL still busy\n", 1858 device_xname(sc->sc_dev), reg); 1859 return ETIMEDOUT; 1860 } 1861 if (val != NULL) 1862 *val = __SHIFTOUT(reg, ATW_BBPCTL_DATA_MASK); 1863 return 0; 1864 } 1865 #endif /* ATW_BBPDEBUG */ 1866 1867 /* Write a register on the Si4126 RF/IF synthesizer using the registers 1868 * provided by the ADM8211 for that purpose. 1869 * 1870 * val is 18 bits of data, and val is the 4-bit address of the register. 1871 * 1872 * Return 0 on success. 1873 */ 1874 static void 1875 atw_si4126_write(struct atw_softc *sc, u_int addr, u_int val) 1876 { 1877 uint32_t bits, mask, reg; 1878 const int nbits = 22; 1879 1880 KASSERT((addr & ~__SHIFTOUT_MASK(SI4126_TWI_ADDR_MASK)) == 0); 1881 KASSERT((val & ~__SHIFTOUT_MASK(SI4126_TWI_DATA_MASK)) == 0); 1882 1883 bits = __SHIFTIN(val, SI4126_TWI_DATA_MASK) | 1884 __SHIFTIN(addr, SI4126_TWI_ADDR_MASK); 1885 1886 reg = ATW_SYNRF_SELSYN; 1887 /* reference driver: reset Si4126 serial bus to initial 1888 * conditions? 1889 */ 1890 ATW_WRITE(sc, ATW_SYNRF, reg | ATW_SYNRF_LEIF); 1891 ATW_WRITE(sc, ATW_SYNRF, reg); 1892 1893 for (mask = __BIT(nbits - 1); mask != 0; mask >>= 1) { 1894 if ((bits & mask) != 0) 1895 reg |= ATW_SYNRF_SYNDATA; 1896 else 1897 reg &= ~ATW_SYNRF_SYNDATA; 1898 ATW_WRITE(sc, ATW_SYNRF, reg); 1899 ATW_WRITE(sc, ATW_SYNRF, reg | ATW_SYNRF_SYNCLK); 1900 ATW_WRITE(sc, ATW_SYNRF, reg); 1901 } 1902 ATW_WRITE(sc, ATW_SYNRF, reg | ATW_SYNRF_LEIF); 1903 ATW_WRITE(sc, ATW_SYNRF, 0x0); 1904 } 1905 1906 /* Read 18-bit data from the 4-bit address addr in Si4126 1907 * RF synthesizer and write the data to *val. Return 0 on success. 1908 * 1909 * XXX This does not seem to work. The ADM8211 must require more or 1910 * different magic to read the chip than to write it. 1911 */ 1912 #ifdef ATW_SYNDEBUG 1913 static int 1914 atw_si4126_read(struct atw_softc *sc, u_int addr, u_int *val) 1915 { 1916 uint32_t reg; 1917 int i; 1918 1919 KASSERT((addr & ~__SHIFTOUT_MASK(SI4126_TWI_ADDR_MASK)) == 0); 1920 1921 for (i = 1000; --i >= 0; ) { 1922 if (ATW_ISSET(sc, ATW_SYNCTL, ATW_SYNCTL_RD | ATW_SYNCTL_WR) 1923 == 0) 1924 break; 1925 DELAY(100); 1926 } 1927 1928 if (i < 0) { 1929 printf("%s: start atw_si4126_read, SYNCTL busy\n", 1930 device_xname(sc->sc_dev)); 1931 return ETIMEDOUT; 1932 } 1933 1934 reg = sc->sc_synctl_rd | __SHIFTIN(addr, ATW_SYNCTL_DATA_MASK); 1935 1936 ATW_WRITE(sc, ATW_SYNCTL, reg); 1937 1938 for (i = 1000; --i >= 0; ) { 1939 DELAY(100); 1940 if (ATW_ISSET(sc, ATW_SYNCTL, ATW_SYNCTL_RD) == 0) 1941 break; 1942 } 1943 1944 ATW_CLR(sc, ATW_SYNCTL, ATW_SYNCTL_RD); 1945 1946 if (i < 0) { 1947 printf("%s: atw_si4126_read wrote %#08x, SYNCTL still busy\n", 1948 device_xname(sc->sc_dev), reg); 1949 return ETIMEDOUT; 1950 } 1951 if (val != NULL) 1952 *val = __SHIFTOUT(ATW_READ(sc, ATW_SYNCTL), 1953 ATW_SYNCTL_DATA_MASK); 1954 return 0; 1955 } 1956 #endif /* ATW_SYNDEBUG */ 1957 1958 /* XXX is the endianness correct? test. */ 1959 #define atw_calchash(addr) \ 1960 (ether_crc32_le((addr), IEEE80211_ADDR_LEN) & __BITS(5, 0)) 1961 1962 /* 1963 * atw_filter_setup: 1964 * 1965 * Set the ADM8211's receive filter. 1966 */ 1967 static void 1968 atw_filter_setup(struct atw_softc *sc) 1969 { 1970 struct ieee80211com *ic = &sc->sc_ic; 1971 struct ethercom *ec = &sc->sc_ec; 1972 struct ifnet *ifp = &sc->sc_if; 1973 int hash; 1974 uint32_t hashes[2]; 1975 struct ether_multi *enm; 1976 struct ether_multistep step; 1977 1978 /* According to comments in tlp_al981_filter_setup 1979 * (dev/ic/tulip.c) the ADMtek AL981 does not like for its 1980 * multicast filter to be set while it is running. Hopefully 1981 * the ADM8211 is not the same! 1982 */ 1983 if ((ifp->if_flags & IFF_RUNNING) != 0) 1984 atw_idle(sc, ATW_NAR_SR); 1985 1986 sc->sc_opmode &= ~(ATW_NAR_PB | ATW_NAR_PR | ATW_NAR_MM); 1987 ifp->if_flags &= ~IFF_ALLMULTI; 1988 1989 /* XXX in scan mode, do not filter packets. Maybe this is 1990 * unnecessary. 1991 */ 1992 if (ic->ic_state == IEEE80211_S_SCAN || 1993 (ifp->if_flags & IFF_PROMISC) != 0) { 1994 sc->sc_opmode |= ATW_NAR_PR | ATW_NAR_PB; 1995 goto allmulti; 1996 } 1997 1998 hashes[0] = hashes[1] = 0x0; 1999 2000 /* 2001 * Program the 64-bit multicast hash filter. 2002 */ 2003 ETHER_LOCK(ec); 2004 ETHER_FIRST_MULTI(step, ec, enm); 2005 while (enm != NULL) { 2006 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, 2007 ETHER_ADDR_LEN) != 0) { 2008 ETHER_UNLOCK(ec); 2009 goto allmulti; 2010 } 2011 2012 hash = atw_calchash(enm->enm_addrlo); 2013 hashes[hash >> 5] |= 1 << (hash & 0x1f); 2014 ETHER_NEXT_MULTI(step, enm); 2015 sc->sc_opmode |= ATW_NAR_MM; 2016 } 2017 ETHER_UNLOCK(ec); 2018 ifp->if_flags &= ~IFF_ALLMULTI; 2019 goto setit; 2020 2021 allmulti: 2022 sc->sc_opmode |= ATW_NAR_MM; 2023 ifp->if_flags |= IFF_ALLMULTI; 2024 hashes[0] = hashes[1] = 0xffffffff; 2025 2026 setit: 2027 ATW_WRITE(sc, ATW_MAR0, hashes[0]); 2028 ATW_WRITE(sc, ATW_MAR1, hashes[1]); 2029 ATW_WRITE(sc, ATW_NAR, sc->sc_opmode); 2030 DELAY(atw_nar_delay); 2031 ATW_WRITE(sc, ATW_RDR, 0x1); 2032 2033 DPRINTF(sc, ("%s: ATW_NAR %08x opmode %08x\n", device_xname(sc->sc_dev), 2034 ATW_READ(sc, ATW_NAR), sc->sc_opmode)); 2035 } 2036 2037 /* Tell the ADM8211 our preferred BSSID. The ADM8211 must match 2038 * a beacon's BSSID and SSID against the preferred BSSID and SSID 2039 * before it will raise ATW_INTR_LINKON. When the ADM8211 receives 2040 * no beacon with the preferred BSSID and SSID in the number of 2041 * beacon intervals given in ATW_BPLI, then it raises ATW_INTR_LINKOFF. 2042 */ 2043 static void 2044 atw_write_bssid(struct atw_softc *sc) 2045 { 2046 struct ieee80211com *ic = &sc->sc_ic; 2047 uint8_t *bssid; 2048 2049 bssid = ic->ic_bss->ni_bssid; 2050 2051 ATW_WRITE(sc, ATW_BSSID0, 2052 __SHIFTIN(bssid[0], ATW_BSSID0_BSSIDB0_MASK) | 2053 __SHIFTIN(bssid[1], ATW_BSSID0_BSSIDB1_MASK) | 2054 __SHIFTIN(bssid[2], ATW_BSSID0_BSSIDB2_MASK) | 2055 __SHIFTIN(bssid[3], ATW_BSSID0_BSSIDB3_MASK)); 2056 2057 ATW_WRITE(sc, ATW_ABDA1, 2058 (ATW_READ(sc, ATW_ABDA1) & 2059 ~(ATW_ABDA1_BSSIDB4_MASK | ATW_ABDA1_BSSIDB5_MASK)) | 2060 __SHIFTIN(bssid[4], ATW_ABDA1_BSSIDB4_MASK) | 2061 __SHIFTIN(bssid[5], ATW_ABDA1_BSSIDB5_MASK)); 2062 2063 DPRINTF(sc, ("%s: BSSID %s -> ", device_xname(sc->sc_dev), 2064 ether_sprintf(sc->sc_bssid))); 2065 DPRINTF(sc, ("%s\n", ether_sprintf(bssid))); 2066 2067 memcpy(sc->sc_bssid, bssid, sizeof(sc->sc_bssid)); 2068 } 2069 2070 /* Write buflen bytes from buf to SRAM starting at the SRAM's ofs'th 2071 * 16-bit word. 2072 */ 2073 static void 2074 atw_write_sram(struct atw_softc *sc, u_int ofs, uint8_t *buf, u_int buflen) 2075 { 2076 u_int i; 2077 uint8_t *ptr; 2078 2079 memcpy(&sc->sc_sram[ofs], buf, buflen); 2080 2081 KASSERT(ofs % 2 == 0 && buflen % 2 == 0); 2082 2083 KASSERT(buflen + ofs <= sc->sc_sramlen); 2084 2085 ptr = &sc->sc_sram[ofs]; 2086 2087 for (i = 0; i < buflen; i += 2) { 2088 ATW_WRITE(sc, ATW_WEPCTL, ATW_WEPCTL_WR | 2089 __SHIFTIN((ofs + i) / 2, ATW_WEPCTL_TBLADD_MASK)); 2090 DELAY(atw_writewep_delay); 2091 2092 ATW_WRITE(sc, ATW_WESK, 2093 __SHIFTIN((ptr[i + 1] << 8) | ptr[i], ATW_WESK_DATA_MASK)); 2094 DELAY(atw_writewep_delay); 2095 } 2096 ATW_WRITE(sc, ATW_WEPCTL, sc->sc_wepctl); /* restore WEP condition */ 2097 2098 if (sc->sc_if.if_flags & IFF_DEBUG) { 2099 int n_octets = 0; 2100 printf("%s: wrote %d bytes at 0x%x wepctl 0x%08x\n", 2101 device_xname(sc->sc_dev), buflen, ofs, sc->sc_wepctl); 2102 for (i = 0; i < buflen; i++) { 2103 printf(" %02x", ptr[i]); 2104 if (++n_octets % 24 == 0) 2105 printf("\n"); 2106 } 2107 if (n_octets % 24 != 0) 2108 printf("\n"); 2109 } 2110 } 2111 2112 static int 2113 atw_key_delete(struct ieee80211com *ic, const struct ieee80211_key *k) 2114 { 2115 struct atw_softc *sc = ic->ic_ifp->if_softc; 2116 u_int keyix = k->wk_keyix; 2117 2118 DPRINTF(sc, ("%s: delete key %u\n", __func__, keyix)); 2119 2120 if (keyix >= IEEE80211_WEP_NKID) 2121 return 0; 2122 if (k->wk_keylen != 0) 2123 sc->sc_flags &= ~ATWF_WEP_SRAM_VALID; 2124 2125 return 1; 2126 } 2127 2128 static int 2129 atw_key_set(struct ieee80211com *ic, const struct ieee80211_key *k, 2130 const uint8_t mac[IEEE80211_ADDR_LEN]) 2131 { 2132 struct atw_softc *sc = ic->ic_ifp->if_softc; 2133 2134 DPRINTF(sc, ("%s: set key %u\n", __func__, k->wk_keyix)); 2135 2136 if (k->wk_keyix >= IEEE80211_WEP_NKID) 2137 return 0; 2138 2139 sc->sc_flags &= ~ATWF_WEP_SRAM_VALID; 2140 2141 return 1; 2142 } 2143 2144 static void 2145 atw_key_update_begin(struct ieee80211com *ic) 2146 { 2147 #ifdef ATW_DEBUG 2148 struct ifnet *ifp = ic->ic_ifp; 2149 struct atw_softc *sc = ifp->if_softc; 2150 #endif 2151 2152 DPRINTF(sc, ("%s:\n", __func__)); 2153 } 2154 2155 static void 2156 atw_key_update_end(struct ieee80211com *ic) 2157 { 2158 struct ifnet *ifp = ic->ic_ifp; 2159 struct atw_softc *sc = ifp->if_softc; 2160 2161 DPRINTF(sc, ("%s:\n", __func__)); 2162 2163 if ((sc->sc_flags & ATWF_WEP_SRAM_VALID) != 0) 2164 return; 2165 if (!device_activation(sc->sc_dev, DEVACT_LEVEL_DRIVER)) 2166 return; 2167 atw_idle(sc, ATW_NAR_SR | ATW_NAR_ST); 2168 atw_write_wep(sc); 2169 ATW_WRITE(sc, ATW_NAR, sc->sc_opmode); 2170 DELAY(atw_nar_delay); 2171 ATW_WRITE(sc, ATW_RDR, 0x1); 2172 } 2173 2174 /* Write WEP keys from the ieee80211com to the ADM8211's SRAM. */ 2175 static void 2176 atw_write_wep(struct atw_softc *sc) 2177 { 2178 #if 0 2179 struct ieee80211com *ic = &sc->sc_ic; 2180 uint32_t reg; 2181 int i; 2182 #endif 2183 /* SRAM shared-key record format: key0 flags key1 ... key12 */ 2184 uint8_t buf[IEEE80211_WEP_NKID] 2185 [1 /* key[0] */ + 1 /* flags */ + 12 /* key[1 .. 12] */]; 2186 2187 sc->sc_wepctl = 0; 2188 ATW_WRITE(sc, ATW_WEPCTL, sc->sc_wepctl); 2189 2190 memset(&buf[0][0], 0, sizeof(buf)); 2191 2192 #if 0 2193 for (i = 0; i < IEEE80211_WEP_NKID; i++) { 2194 if (ic->ic_nw_keys[i].wk_keylen > 5) { 2195 buf[i][1] = ATW_WEP_ENABLED | ATW_WEP_104BIT; 2196 } else if (ic->ic_nw_keys[i].wk_keylen != 0) { 2197 buf[i][1] = ATW_WEP_ENABLED; 2198 } else { 2199 buf[i][1] = 0; 2200 continue; 2201 } 2202 buf[i][0] = ic->ic_nw_keys[i].wk_key[0]; 2203 memcpy(&buf[i][2], &ic->ic_nw_keys[i].wk_key[1], 2204 ic->ic_nw_keys[i].wk_keylen - 1); 2205 } 2206 2207 reg = ATW_READ(sc, ATW_MACTEST); 2208 reg |= ATW_MACTEST_MMI_USETXCLK | ATW_MACTEST_FORCE_KEYID; 2209 reg &= ~ATW_MACTEST_KEYID_MASK; 2210 reg |= __SHIFTIN(ic->ic_def_txkey, ATW_MACTEST_KEYID_MASK); 2211 ATW_WRITE(sc, ATW_MACTEST, reg); 2212 2213 if ((ic->ic_flags & IEEE80211_F_PRIVACY) != 0) 2214 sc->sc_wepctl |= ATW_WEPCTL_WEPENABLE; 2215 2216 switch (sc->sc_rev) { 2217 case ATW_REVISION_AB: 2218 case ATW_REVISION_AF: 2219 /* Bypass WEP on Rx. */ 2220 sc->sc_wepctl |= ATW_WEPCTL_WEPRXBYP; 2221 break; 2222 default: 2223 break; 2224 } 2225 #endif 2226 2227 atw_write_sram(sc, ATW_SRAM_ADDR_SHARED_KEY, (uint8_t*)&buf[0][0], 2228 sizeof(buf)); 2229 2230 sc->sc_flags |= ATWF_WEP_SRAM_VALID; 2231 } 2232 2233 static void 2234 atw_recv_mgmt(struct ieee80211com *ic, struct mbuf *m, 2235 struct ieee80211_node *ni, int subtype, int rssi, uint32_t rstamp) 2236 { 2237 struct atw_softc *sc = (struct atw_softc *)ic->ic_ifp->if_softc; 2238 2239 /* The ADM8211A answers probe requests. TBD ADM8211B/C. */ 2240 if (subtype == IEEE80211_FC0_SUBTYPE_PROBE_REQ) 2241 return; 2242 2243 (*sc->sc_recv_mgmt)(ic, m, ni, subtype, rssi, rstamp); 2244 2245 switch (subtype) { 2246 case IEEE80211_FC0_SUBTYPE_PROBE_RESP: 2247 case IEEE80211_FC0_SUBTYPE_BEACON: 2248 if (ic->ic_opmode == IEEE80211_M_IBSS && 2249 ic->ic_state == IEEE80211_S_RUN) { 2250 if (le64toh(ni->ni_tstamp.tsf) >= atw_get_tsft(sc)) 2251 (void)ieee80211_ibss_merge(ni); 2252 } 2253 break; 2254 default: 2255 break; 2256 } 2257 return; 2258 } 2259 2260 /* Write the SSID in the ieee80211com to the SRAM on the ADM8211. 2261 * In ad hoc mode, the SSID is written to the beacons sent by the 2262 * ADM8211. In both ad hoc and infrastructure mode, beacons received 2263 * with matching SSID affect ATW_INTR_LINKON/ATW_INTR_LINKOFF 2264 * indications. 2265 */ 2266 static void 2267 atw_write_ssid(struct atw_softc *sc) 2268 { 2269 struct ieee80211com *ic = &sc->sc_ic; 2270 /* 34 bytes are reserved in ADM8211 SRAM for the SSID, but 2271 * it only expects the element length, not its ID. 2272 */ 2273 uint8_t buf[roundup(1 /* length */ + IEEE80211_NWID_LEN, 2)]; 2274 2275 memset(buf, 0, sizeof(buf)); 2276 buf[0] = ic->ic_bss->ni_esslen; 2277 memcpy(&buf[1], ic->ic_bss->ni_essid, ic->ic_bss->ni_esslen); 2278 2279 atw_write_sram(sc, ATW_SRAM_ADDR_SSID, buf, 2280 roundup(1 + ic->ic_bss->ni_esslen, 2)); 2281 } 2282 2283 /* Write the supported rates in the ieee80211com to the SRAM of the ADM8211. 2284 * In ad hoc mode, the supported rates are written to beacons sent by the 2285 * ADM8211. 2286 */ 2287 static void 2288 atw_write_sup_rates(struct atw_softc *sc) 2289 { 2290 struct ieee80211com *ic = &sc->sc_ic; 2291 /* 14 bytes are probably (XXX) reserved in the ADM8211 SRAM for 2292 * supported rates 2293 */ 2294 uint8_t buf[roundup(1 /* length */ + IEEE80211_RATE_SIZE, 2)]; 2295 2296 memset(buf, 0, sizeof(buf)); 2297 2298 buf[0] = ic->ic_bss->ni_rates.rs_nrates; 2299 2300 memcpy(&buf[1], ic->ic_bss->ni_rates.rs_rates, 2301 ic->ic_bss->ni_rates.rs_nrates); 2302 2303 atw_write_sram(sc, ATW_SRAM_ADDR_SUPRATES, buf, sizeof(buf)); 2304 } 2305 2306 /* Start/stop sending beacons. */ 2307 void 2308 atw_start_beacon(struct atw_softc *sc, int start) 2309 { 2310 struct ieee80211com *ic = &sc->sc_ic; 2311 uint16_t chan; 2312 uint32_t bcnt, bpli, cap0, cap1, capinfo; 2313 size_t len; 2314 2315 if (!device_is_active(sc->sc_dev)) 2316 return; 2317 2318 /* start beacons */ 2319 len = sizeof(struct ieee80211_frame) + 2320 8 /* timestamp */ + 2 /* beacon interval */ + 2321 2 /* capability info */ + 2322 2 + ic->ic_bss->ni_esslen /* SSID element */ + 2323 2 + ic->ic_bss->ni_rates.rs_nrates /* rates element */ + 2324 3 /* DS parameters */ + 2325 IEEE80211_CRC_LEN; 2326 2327 bcnt = ATW_READ(sc, ATW_BCNT) & ~ATW_BCNT_BCNT_MASK; 2328 cap0 = ATW_READ(sc, ATW_CAP0) & ~ATW_CAP0_CHN_MASK; 2329 cap1 = ATW_READ(sc, ATW_CAP1) & ~ATW_CAP1_CAPI_MASK; 2330 2331 ATW_WRITE(sc, ATW_BCNT, bcnt); 2332 ATW_WRITE(sc, ATW_CAP1, cap1); 2333 2334 if (!start) 2335 return; 2336 2337 /* TBD use ni_capinfo */ 2338 2339 capinfo = 0; 2340 if (ic->ic_flags & IEEE80211_F_SHPREAMBLE) 2341 capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; 2342 if (ic->ic_flags & IEEE80211_F_PRIVACY) 2343 capinfo |= IEEE80211_CAPINFO_PRIVACY; 2344 2345 switch (ic->ic_opmode) { 2346 case IEEE80211_M_IBSS: 2347 len += 4; /* IBSS parameters */ 2348 capinfo |= IEEE80211_CAPINFO_IBSS; 2349 break; 2350 case IEEE80211_M_HOSTAP: 2351 /* XXX 6-byte minimum TIM */ 2352 len += atw_beacon_len_adjust; 2353 capinfo |= IEEE80211_CAPINFO_ESS; 2354 break; 2355 default: 2356 return; 2357 } 2358 2359 /* set listen interval 2360 * XXX do software units agree w/ hardware? 2361 */ 2362 bpli = __SHIFTIN(ic->ic_bss->ni_intval, ATW_BPLI_BP_MASK) | 2363 __SHIFTIN(ic->ic_lintval / ic->ic_bss->ni_intval, ATW_BPLI_LI_MASK); 2364 2365 chan = ieee80211_chan2ieee(ic, ic->ic_curchan); 2366 2367 bcnt |= __SHIFTIN(len, ATW_BCNT_BCNT_MASK); 2368 cap0 |= __SHIFTIN(chan, ATW_CAP0_CHN_MASK); 2369 cap1 |= __SHIFTIN(capinfo, ATW_CAP1_CAPI_MASK); 2370 2371 ATW_WRITE(sc, ATW_BCNT, bcnt); 2372 ATW_WRITE(sc, ATW_BPLI, bpli); 2373 ATW_WRITE(sc, ATW_CAP0, cap0); 2374 ATW_WRITE(sc, ATW_CAP1, cap1); 2375 2376 DPRINTF(sc, ("%s: atw_start_beacon reg[ATW_BCNT] = %08x\n", 2377 device_xname(sc->sc_dev), bcnt)); 2378 2379 DPRINTF(sc, ("%s: atw_start_beacon reg[ATW_CAP1] = %08x\n", 2380 device_xname(sc->sc_dev), cap1)); 2381 } 2382 2383 /* Return the 32 lsb of the last TSFT divisible by ival. */ 2384 static inline uint32_t 2385 atw_last_even_tsft(uint32_t tsfth, uint32_t tsftl, uint32_t ival) 2386 { 2387 /* Following the reference driver's lead, I compute 2388 * 2389 * (uint32_t)((((uint64_t)tsfth << 32) | tsftl) % ival) 2390 * 2391 * without using 64-bit arithmetic, using the following 2392 * relationship: 2393 * 2394 * (0x100000000 * H + L) % m 2395 * = ((0x100000000 % m) * H + L) % m 2396 * = (((0xffffffff + 1) % m) * H + L) % m 2397 * = ((0xffffffff % m + 1 % m) * H + L) % m 2398 * = ((0xffffffff % m + 1) * H + L) % m 2399 */ 2400 return ((0xFFFFFFFF % ival + 1) * tsfth + tsftl) % ival; 2401 } 2402 2403 static uint64_t 2404 atw_get_tsft(struct atw_softc *sc) 2405 { 2406 int i; 2407 uint32_t tsfth, tsftl; 2408 for (i = 0; i < 2; i++) { 2409 tsfth = ATW_READ(sc, ATW_TSFTH); 2410 tsftl = ATW_READ(sc, ATW_TSFTL); 2411 if (ATW_READ(sc, ATW_TSFTH) == tsfth) 2412 break; 2413 } 2414 return ((uint64_t)tsfth << 32) | tsftl; 2415 } 2416 2417 /* If we've created an IBSS, write the TSF time in the ADM8211 to 2418 * the ieee80211com. 2419 * 2420 * Predict the next target beacon transmission time (TBTT) and 2421 * write it to the ADM8211. 2422 */ 2423 static void 2424 atw_predict_beacon(struct atw_softc *sc) 2425 { 2426 #define TBTTOFS 20 /* TU */ 2427 2428 struct ieee80211com *ic = &sc->sc_ic; 2429 uint64_t tsft; 2430 uint32_t ival, past_even, tbtt, tsfth, tsftl; 2431 union { 2432 uint64_t word; 2433 uint8_t tstamp[8]; 2434 } u; 2435 2436 if ((ic->ic_opmode == IEEE80211_M_HOSTAP) || 2437 ((ic->ic_opmode == IEEE80211_M_IBSS) && 2438 (ic->ic_flags & IEEE80211_F_SIBSS))) { 2439 tsft = atw_get_tsft(sc); 2440 u.word = htole64(tsft); 2441 (void)memcpy(&ic->ic_bss->ni_tstamp, &u.tstamp[0], 2442 sizeof(ic->ic_bss->ni_tstamp)); 2443 } else 2444 tsft = le64toh(ic->ic_bss->ni_tstamp.tsf); 2445 2446 ival = ic->ic_bss->ni_intval * IEEE80211_DUR_TU; 2447 2448 tsftl = tsft & 0xFFFFFFFF; 2449 tsfth = tsft >> 32; 2450 2451 /* We sent/received the last beacon `past' microseconds 2452 * after the interval divided the TSF timer. 2453 */ 2454 past_even = tsftl - atw_last_even_tsft(tsfth, tsftl, ival); 2455 2456 /* Skip ten beacons so that the TBTT cannot pass before 2457 * we've programmed it. Ten is an arbitrary number. 2458 */ 2459 tbtt = past_even + ival * 10; 2460 2461 ATW_WRITE(sc, ATW_TOFS1, 2462 __SHIFTIN(1, ATW_TOFS1_TSFTOFSR_MASK) | 2463 __SHIFTIN(TBTTOFS, ATW_TOFS1_TBTTOFS_MASK) | 2464 __SHIFTIN(__SHIFTOUT(tbtt - TBTTOFS * IEEE80211_DUR_TU, 2465 ATW_TBTTPRE_MASK), ATW_TOFS1_TBTTPRE_MASK)); 2466 #undef TBTTOFS 2467 } 2468 2469 static void 2470 atw_next_scan(void *arg) 2471 { 2472 struct atw_softc *sc = arg; 2473 struct ieee80211com *ic = &sc->sc_ic; 2474 int s; 2475 2476 /* don't call atw_start w/o network interrupts blocked */ 2477 s = splnet(); 2478 if (ic->ic_state == IEEE80211_S_SCAN) 2479 ieee80211_next_scan(ic); 2480 splx(s); 2481 } 2482 2483 /* Synchronize the hardware state with the software state. */ 2484 static int 2485 atw_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg) 2486 { 2487 struct ifnet *ifp = ic->ic_ifp; 2488 struct atw_softc *sc = ifp->if_softc; 2489 int error = 0; 2490 2491 callout_stop(&sc->sc_scan_ch); 2492 2493 switch (nstate) { 2494 case IEEE80211_S_AUTH: 2495 case IEEE80211_S_ASSOC: 2496 atw_write_bssid(sc); 2497 error = atw_tune(sc); 2498 break; 2499 case IEEE80211_S_INIT: 2500 callout_stop(&sc->sc_scan_ch); 2501 sc->sc_cur_chan = IEEE80211_CHAN_ANY; 2502 atw_start_beacon(sc, 0); 2503 break; 2504 case IEEE80211_S_SCAN: 2505 error = atw_tune(sc); 2506 callout_reset(&sc->sc_scan_ch, atw_dwelltime * hz / 1000, 2507 atw_next_scan, sc); 2508 break; 2509 case IEEE80211_S_RUN: 2510 error = atw_tune(sc); 2511 atw_write_bssid(sc); 2512 atw_write_ssid(sc); 2513 atw_write_sup_rates(sc); 2514 2515 if (ic->ic_opmode == IEEE80211_M_AHDEMO || 2516 ic->ic_opmode == IEEE80211_M_MONITOR) 2517 break; 2518 2519 /* set listen interval 2520 * XXX do software units agree w/ hardware? 2521 */ 2522 ATW_WRITE(sc, ATW_BPLI, 2523 __SHIFTIN(ic->ic_bss->ni_intval, ATW_BPLI_BP_MASK) | 2524 __SHIFTIN(ic->ic_lintval / ic->ic_bss->ni_intval, 2525 ATW_BPLI_LI_MASK)); 2526 2527 DPRINTF(sc, ("%s: reg[ATW_BPLI] = %08x\n", device_xname(sc->sc_dev), 2528 ATW_READ(sc, ATW_BPLI))); 2529 2530 atw_predict_beacon(sc); 2531 2532 switch (ic->ic_opmode) { 2533 case IEEE80211_M_AHDEMO: 2534 case IEEE80211_M_HOSTAP: 2535 case IEEE80211_M_IBSS: 2536 atw_start_beacon(sc, 1); 2537 break; 2538 case IEEE80211_M_MONITOR: 2539 case IEEE80211_M_STA: 2540 break; 2541 } 2542 2543 break; 2544 } 2545 return (error != 0) ? error : (*sc->sc_newstate)(ic, nstate, arg); 2546 } 2547 2548 /* 2549 * atw_add_rxbuf: 2550 * 2551 * Add a receive buffer to the indicated descriptor. 2552 */ 2553 int 2554 atw_add_rxbuf(struct atw_softc *sc, int idx) 2555 { 2556 struct atw_rxsoft *rxs = &sc->sc_rxsoft[idx]; 2557 struct mbuf *m; 2558 int error; 2559 2560 MGETHDR(m, M_DONTWAIT, MT_DATA); 2561 if (m == NULL) 2562 return (ENOBUFS); 2563 2564 MCLGET(m, M_DONTWAIT); 2565 if ((m->m_flags & M_EXT) == 0) { 2566 m_freem(m); 2567 return (ENOBUFS); 2568 } 2569 2570 if (rxs->rxs_mbuf != NULL) 2571 bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); 2572 2573 rxs->rxs_mbuf = m; 2574 2575 error = bus_dmamap_load(sc->sc_dmat, rxs->rxs_dmamap, 2576 m->m_ext.ext_buf, m->m_ext.ext_size, NULL, 2577 BUS_DMA_READ | BUS_DMA_NOWAIT); 2578 if (error) { 2579 aprint_error_dev(sc->sc_dev, "can't load rx DMA map %d, error = %d\n", 2580 idx, error); 2581 panic("atw_add_rxbuf"); /* XXX */ 2582 } 2583 2584 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, 2585 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); 2586 2587 atw_init_rxdesc(sc, idx); 2588 2589 return (0); 2590 } 2591 2592 /* 2593 * Release any queued transmit buffers. 2594 */ 2595 void 2596 atw_txdrain(struct atw_softc *sc) 2597 { 2598 struct atw_txsoft *txs; 2599 2600 while ((txs = SIMPLEQ_FIRST(&sc->sc_txdirtyq)) != NULL) { 2601 SIMPLEQ_REMOVE_HEAD(&sc->sc_txdirtyq, txs_q); 2602 if (txs->txs_mbuf != NULL) { 2603 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 2604 m_freem(txs->txs_mbuf); 2605 txs->txs_mbuf = NULL; 2606 } 2607 SIMPLEQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q); 2608 sc->sc_txfree += txs->txs_ndescs; 2609 } 2610 2611 KASSERT((sc->sc_if.if_flags & IFF_RUNNING) == 0 || 2612 !(SIMPLEQ_EMPTY(&sc->sc_txfreeq) || 2613 sc->sc_txfree != ATW_NTXDESC)); 2614 sc->sc_if.if_flags &= ~IFF_OACTIVE; 2615 sc->sc_tx_timer = 0; 2616 } 2617 2618 /* 2619 * atw_stop: [ ifnet interface function ] 2620 * 2621 * Stop transmission on the interface. 2622 */ 2623 void 2624 atw_stop(struct ifnet *ifp, int disable) 2625 { 2626 struct atw_softc *sc = ifp->if_softc; 2627 struct ieee80211com *ic = &sc->sc_ic; 2628 2629 ieee80211_new_state(ic, IEEE80211_S_INIT, -1); 2630 2631 if (device_is_active(sc->sc_dev)) { 2632 /* Disable interrupts. */ 2633 ATW_WRITE(sc, ATW_IER, 0); 2634 2635 /* Stop the transmit and receive processes. */ 2636 ATW_WRITE(sc, ATW_NAR, 0); 2637 DELAY(atw_nar_delay); 2638 ATW_WRITE(sc, ATW_TDBD, 0); 2639 ATW_WRITE(sc, ATW_TDBP, 0); 2640 ATW_WRITE(sc, ATW_RDB, 0); 2641 } 2642 2643 sc->sc_opmode = 0; 2644 2645 atw_txdrain(sc); 2646 2647 /* 2648 * Mark the interface down and cancel the watchdog timer. 2649 */ 2650 ifp->if_flags &= ~IFF_RUNNING; 2651 ifp->if_timer = 0; 2652 2653 if (disable) 2654 pmf_device_suspend(sc->sc_dev, &sc->sc_qual); 2655 } 2656 2657 /* 2658 * atw_rxdrain: 2659 * 2660 * Drain the receive queue. 2661 */ 2662 void 2663 atw_rxdrain(struct atw_softc *sc) 2664 { 2665 struct atw_rxsoft *rxs; 2666 int i; 2667 2668 for (i = 0; i < ATW_NRXDESC; i++) { 2669 rxs = &sc->sc_rxsoft[i]; 2670 if (rxs->rxs_mbuf == NULL) 2671 continue; 2672 bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); 2673 m_freem(rxs->rxs_mbuf); 2674 rxs->rxs_mbuf = NULL; 2675 } 2676 } 2677 2678 /* 2679 * atw_detach: 2680 * 2681 * Detach an ADM8211 interface. 2682 */ 2683 int 2684 atw_detach(struct atw_softc *sc) 2685 { 2686 struct ifnet *ifp = &sc->sc_if; 2687 struct atw_rxsoft *rxs; 2688 struct atw_txsoft *txs; 2689 int i; 2690 2691 /* 2692 * Succeed now if there isn't any work to do. 2693 */ 2694 if ((sc->sc_flags & ATWF_ATTACHED) == 0) 2695 return (0); 2696 2697 pmf_device_deregister(sc->sc_dev); 2698 2699 callout_stop(&sc->sc_scan_ch); 2700 2701 ieee80211_ifdetach(&sc->sc_ic); 2702 if_detach(ifp); 2703 2704 for (i = 0; i < ATW_NRXDESC; i++) { 2705 rxs = &sc->sc_rxsoft[i]; 2706 if (rxs->rxs_mbuf != NULL) { 2707 bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); 2708 m_freem(rxs->rxs_mbuf); 2709 rxs->rxs_mbuf = NULL; 2710 } 2711 bus_dmamap_destroy(sc->sc_dmat, rxs->rxs_dmamap); 2712 } 2713 for (i = 0; i < ATW_TXQUEUELEN; i++) { 2714 txs = &sc->sc_txsoft[i]; 2715 if (txs->txs_mbuf != NULL) { 2716 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 2717 m_freem(txs->txs_mbuf); 2718 txs->txs_mbuf = NULL; 2719 } 2720 bus_dmamap_destroy(sc->sc_dmat, txs->txs_dmamap); 2721 } 2722 bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap); 2723 bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap); 2724 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data, 2725 sizeof(struct atw_control_data)); 2726 bus_dmamem_free(sc->sc_dmat, &sc->sc_cdseg, sc->sc_cdnseg); 2727 2728 if (sc->sc_srom) 2729 free(sc->sc_srom, M_DEVBUF); 2730 2731 atw_evcnt_detach(sc); 2732 2733 if (sc->sc_soft_ih != NULL) { 2734 softint_disestablish(sc->sc_soft_ih); 2735 sc->sc_soft_ih = NULL; 2736 } 2737 2738 return (0); 2739 } 2740 2741 /* atw_shutdown: make sure the interface is stopped at reboot time. */ 2742 bool 2743 atw_shutdown(device_t self, int flags) 2744 { 2745 struct atw_softc *sc = device_private(self); 2746 2747 atw_stop(&sc->sc_if, 1); 2748 return true; 2749 } 2750 2751 #if 0 2752 static void 2753 atw_workaround1(struct atw_softc *sc) 2754 { 2755 uint32_t test1; 2756 2757 test1 = ATW_READ(sc, ATW_TEST1); 2758 2759 sc->sc_misc_ev.ev_count++; 2760 2761 if ((test1 & ATW_TEST1_RXPKT1IN) != 0) { 2762 sc->sc_rxpkt1in_ev.ev_count++; 2763 return; 2764 } 2765 if (__SHIFTOUT(test1, ATW_TEST1_RRA_MASK) == 2766 __SHIFTOUT(test1, ATW_TEST1_RWA_MASK)) { 2767 sc->sc_rxamatch_ev.ev_count++; 2768 return; 2769 } 2770 sc->sc_workaround1_ev.ev_count++; 2771 (void)atw_init(&sc->sc_if); 2772 } 2773 #endif 2774 2775 int 2776 atw_intr(void *arg) 2777 { 2778 struct atw_softc *sc = arg; 2779 struct ifnet *ifp = &sc->sc_if; 2780 uint32_t status; 2781 2782 #ifdef DEBUG 2783 if (!device_activation(sc->sc_dev, DEVACT_LEVEL_DRIVER)) 2784 panic("%s: atw_intr: not enabled", device_xname(sc->sc_dev)); 2785 #endif 2786 2787 /* 2788 * If the interface isn't running, the interrupt couldn't 2789 * possibly have come from us. 2790 */ 2791 if ((ifp->if_flags & IFF_RUNNING) == 0 || 2792 !device_activation(sc->sc_dev, DEVACT_LEVEL_DRIVER)) 2793 return (0); 2794 2795 status = ATW_READ(sc, ATW_STSR); 2796 if (status == 0) 2797 return 0; 2798 2799 if ((status & sc->sc_inten) == 0) { 2800 ATW_WRITE(sc, ATW_STSR, status); 2801 return 0; 2802 } 2803 2804 /* Disable interrupts */ 2805 ATW_WRITE(sc, ATW_IER, 0); 2806 2807 softint_schedule(sc->sc_soft_ih); 2808 return 1; 2809 } 2810 2811 void 2812 atw_softintr(void *arg) 2813 { 2814 struct atw_softc *sc = arg; 2815 struct ifnet *ifp = &sc->sc_if; 2816 uint32_t status, rxstatus, txstatus, linkstatus; 2817 int txthresh, s; 2818 2819 if ((ifp->if_flags & IFF_RUNNING) == 0 || 2820 !device_activation(sc->sc_dev, DEVACT_LEVEL_DRIVER)) 2821 return; 2822 2823 for (;;) { 2824 status = ATW_READ(sc, ATW_STSR); 2825 2826 if (status) 2827 ATW_WRITE(sc, ATW_STSR, status); 2828 2829 #ifdef ATW_DEBUG 2830 #define PRINTINTR(flag) do { \ 2831 if ((status & flag) != 0) { \ 2832 printf("%s" #flag, delim); \ 2833 delim = ","; \ 2834 } \ 2835 } while (0) 2836 2837 if (atw_debug > 1 && status) { 2838 const char *delim = "<"; 2839 2840 printf("%s: reg[STSR] = %x", 2841 device_xname(sc->sc_dev), status); 2842 2843 PRINTINTR(ATW_INTR_FBE); 2844 PRINTINTR(ATW_INTR_LINKOFF); 2845 PRINTINTR(ATW_INTR_LINKON); 2846 PRINTINTR(ATW_INTR_RCI); 2847 PRINTINTR(ATW_INTR_RDU); 2848 PRINTINTR(ATW_INTR_REIS); 2849 PRINTINTR(ATW_INTR_RPS); 2850 PRINTINTR(ATW_INTR_TCI); 2851 PRINTINTR(ATW_INTR_TDU); 2852 PRINTINTR(ATW_INTR_TLT); 2853 PRINTINTR(ATW_INTR_TPS); 2854 PRINTINTR(ATW_INTR_TRT); 2855 PRINTINTR(ATW_INTR_TUF); 2856 PRINTINTR(ATW_INTR_BCNTC); 2857 PRINTINTR(ATW_INTR_ATIME); 2858 PRINTINTR(ATW_INTR_TBTT); 2859 PRINTINTR(ATW_INTR_TSCZ); 2860 PRINTINTR(ATW_INTR_TSFTF); 2861 printf(">\n"); 2862 } 2863 #undef PRINTINTR 2864 #endif /* ATW_DEBUG */ 2865 2866 if ((status & sc->sc_inten) == 0) 2867 break; 2868 2869 rxstatus = status & sc->sc_rxint_mask; 2870 txstatus = status & sc->sc_txint_mask; 2871 linkstatus = status & sc->sc_linkint_mask; 2872 2873 if (linkstatus) { 2874 atw_linkintr(sc, linkstatus); 2875 } 2876 2877 if (rxstatus) { 2878 /* Grab any new packets. */ 2879 atw_rxintr(sc); 2880 2881 if (rxstatus & ATW_INTR_RDU) { 2882 printf("%s: receive ring overrun\n", 2883 device_xname(sc->sc_dev)); 2884 /* Get the receive process going again. */ 2885 ATW_WRITE(sc, ATW_RDR, 0x1); 2886 } 2887 } 2888 2889 if (txstatus) { 2890 /* Sweep up transmit descriptors. */ 2891 atw_txintr(sc, txstatus); 2892 2893 if (txstatus & ATW_INTR_TLT) { 2894 DPRINTF(sc, ("%s: tx lifetime exceeded\n", 2895 device_xname(sc->sc_dev))); 2896 (void)atw_init(&sc->sc_if); 2897 } 2898 2899 if (txstatus & ATW_INTR_TRT) { 2900 DPRINTF(sc, ("%s: tx retry limit exceeded\n", 2901 device_xname(sc->sc_dev))); 2902 } 2903 2904 /* If Tx under-run, increase our transmit threshold 2905 * if another is available. 2906 */ 2907 txthresh = sc->sc_txthresh + 1; 2908 if ((txstatus & ATW_INTR_TUF) && 2909 sc->sc_txth[txthresh].txth_name != NULL) { 2910 /* Idle the transmit process. */ 2911 atw_idle(sc, ATW_NAR_ST); 2912 2913 sc->sc_txthresh = txthresh; 2914 sc->sc_opmode &= ~(ATW_NAR_TR_MASK|ATW_NAR_SF); 2915 sc->sc_opmode |= 2916 sc->sc_txth[txthresh].txth_opmode; 2917 printf("%s: transmit underrun; new " 2918 "threshold: %s\n", device_xname(sc->sc_dev), 2919 sc->sc_txth[txthresh].txth_name); 2920 2921 /* Set the new threshold and restart 2922 * the transmit process. 2923 */ 2924 ATW_WRITE(sc, ATW_NAR, sc->sc_opmode); 2925 DELAY(atw_nar_delay); 2926 ATW_WRITE(sc, ATW_TDR, 0x1); 2927 /* XXX Log every Nth underrun from 2928 * XXX now on? 2929 */ 2930 } 2931 } 2932 2933 if (status & (ATW_INTR_TPS | ATW_INTR_RPS)) { 2934 if (status & ATW_INTR_TPS) 2935 printf("%s: transmit process stopped\n", 2936 device_xname(sc->sc_dev)); 2937 if (status & ATW_INTR_RPS) 2938 printf("%s: receive process stopped\n", 2939 device_xname(sc->sc_dev)); 2940 s = splnet(); 2941 (void)atw_init(ifp); 2942 splx(s); 2943 break; 2944 } 2945 2946 if (status & ATW_INTR_FBE) { 2947 aprint_error_dev(sc->sc_dev, "fatal bus error\n"); 2948 s = splnet(); 2949 (void)atw_init(ifp); 2950 splx(s); 2951 break; 2952 } 2953 2954 /* 2955 * Not handled: 2956 * 2957 * Transmit buffer unavailable -- normal 2958 * condition, nothing to do, really. 2959 * 2960 * Early receive interrupt -- not available on 2961 * all chips, we just use RI. We also only 2962 * use single-segment receive DMA, so this 2963 * is mostly useless. 2964 * 2965 * TBD others 2966 */ 2967 } 2968 2969 /* Try to get more packets going. */ 2970 s = splnet(); 2971 atw_start(ifp); 2972 splx(s); 2973 2974 /* Enable interrupts */ 2975 ATW_WRITE(sc, ATW_IER, sc->sc_inten); 2976 } 2977 2978 /* 2979 * atw_idle: 2980 * 2981 * Cause the transmit and/or receive processes to go idle. 2982 * 2983 * XXX It seems that the ADM8211 will not signal the end of the Rx/Tx 2984 * process in STSR if I clear SR or ST after the process has already 2985 * ceased. Fair enough. But the Rx process status bits in ATW_TEST0 2986 * do not seem to be too reliable. Perhaps I have the sense of the 2987 * Rx bits switched with the Tx bits? 2988 */ 2989 void 2990 atw_idle(struct atw_softc *sc, uint32_t bits) 2991 { 2992 uint32_t ackmask = 0, opmode, stsr, test0; 2993 int i, s; 2994 2995 s = splnet(); 2996 2997 opmode = sc->sc_opmode & ~bits; 2998 2999 if (bits & ATW_NAR_SR) 3000 ackmask |= ATW_INTR_RPS; 3001 3002 if (bits & ATW_NAR_ST) { 3003 ackmask |= ATW_INTR_TPS; 3004 /* set ATW_NAR_HF to flush TX FIFO. */ 3005 opmode |= ATW_NAR_HF; 3006 } 3007 3008 ATW_WRITE(sc, ATW_NAR, opmode); 3009 DELAY(atw_nar_delay); 3010 3011 for (i = 0; i < 1000; i++) { 3012 stsr = ATW_READ(sc, ATW_STSR); 3013 if ((stsr & ackmask) == ackmask) 3014 break; 3015 DELAY(10); 3016 } 3017 3018 ATW_WRITE(sc, ATW_STSR, stsr & ackmask); 3019 3020 if ((stsr & ackmask) == ackmask) 3021 goto out; 3022 3023 test0 = ATW_READ(sc, ATW_TEST0); 3024 3025 if ((bits & ATW_NAR_ST) != 0 && (stsr & ATW_INTR_TPS) == 0 && 3026 (test0 & ATW_TEST0_TS_MASK) != ATW_TEST0_TS_STOPPED) { 3027 printf("%s: transmit process not idle [%s]\n", 3028 device_xname(sc->sc_dev), 3029 atw_tx_state[__SHIFTOUT(test0, ATW_TEST0_TS_MASK)]); 3030 printf("%s: bits %08x test0 %08x stsr %08x\n", 3031 device_xname(sc->sc_dev), bits, test0, stsr); 3032 } 3033 3034 if ((bits & ATW_NAR_SR) != 0 && (stsr & ATW_INTR_RPS) == 0 && 3035 (test0 & ATW_TEST0_RS_MASK) != ATW_TEST0_RS_STOPPED) { 3036 DPRINTF2(sc, ("%s: receive process not idle [%s]\n", 3037 device_xname(sc->sc_dev), 3038 atw_rx_state[__SHIFTOUT(test0, ATW_TEST0_RS_MASK)])); 3039 DPRINTF2(sc, ("%s: bits %08x test0 %08x stsr %08x\n", 3040 device_xname(sc->sc_dev), bits, test0, stsr)); 3041 } 3042 out: 3043 if ((bits & ATW_NAR_ST) != 0) 3044 atw_txdrain(sc); 3045 splx(s); 3046 return; 3047 } 3048 3049 /* 3050 * atw_linkintr: 3051 * 3052 * Helper; handle link-status interrupts. 3053 */ 3054 void 3055 atw_linkintr(struct atw_softc *sc, uint32_t linkstatus) 3056 { 3057 struct ieee80211com *ic = &sc->sc_ic; 3058 3059 if (ic->ic_state != IEEE80211_S_RUN) 3060 return; 3061 3062 if (linkstatus & ATW_INTR_LINKON) { 3063 DPRINTF(sc, ("%s: link on\n", device_xname(sc->sc_dev))); 3064 sc->sc_rescan_timer = 0; 3065 } else if (linkstatus & ATW_INTR_LINKOFF) { 3066 DPRINTF(sc, ("%s: link off\n", device_xname(sc->sc_dev))); 3067 if (ic->ic_opmode != IEEE80211_M_STA) 3068 return; 3069 sc->sc_rescan_timer = 3; 3070 sc->sc_if.if_timer = 1; 3071 } 3072 } 3073 3074 #if 0 3075 static inline int 3076 atw_hw_decrypted(struct atw_softc *sc, struct ieee80211_frame_min *wh) 3077 { 3078 if ((sc->sc_ic.ic_flags & IEEE80211_F_PRIVACY) == 0) 3079 return 0; 3080 if ((wh->i_fc[1] & IEEE80211_FC1_WEP) == 0) 3081 return 0; 3082 return (sc->sc_wepctl & ATW_WEPCTL_WEPRXBYP) == 0; 3083 } 3084 #endif 3085 3086 /* 3087 * atw_rxintr: 3088 * 3089 * Helper; handle receive interrupts. 3090 */ 3091 void 3092 atw_rxintr(struct atw_softc *sc) 3093 { 3094 static int rate_tbl[] = {2, 4, 11, 22, 44}; 3095 struct ieee80211com *ic = &sc->sc_ic; 3096 struct ieee80211_node *ni; 3097 struct ieee80211_frame_min *wh; 3098 struct ifnet *ifp = &sc->sc_if; 3099 struct atw_rxsoft *rxs; 3100 struct mbuf *m; 3101 uint32_t rxstat; 3102 int i, s, len, rate, rate0; 3103 uint32_t rssi, ctlrssi; 3104 3105 for (i = sc->sc_rxptr;; i = sc->sc_rxptr) { 3106 rxs = &sc->sc_rxsoft[i]; 3107 3108 ATW_CDRXSYNC(sc, i, 3109 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 3110 3111 rxstat = le32toh(sc->sc_rxdescs[i].ar_stat); 3112 ctlrssi = le32toh(sc->sc_rxdescs[i].ar_ctlrssi); 3113 rate0 = __SHIFTOUT(rxstat, ATW_RXSTAT_RXDR_MASK); 3114 3115 if (rxstat & ATW_RXSTAT_OWN) { 3116 ATW_CDRXSYNC(sc, i, BUS_DMASYNC_PREREAD); 3117 break; 3118 } 3119 3120 sc->sc_rxptr = ATW_NEXTRX(i); 3121 3122 DPRINTF3(sc, 3123 ("%s: rx stat %08x ctlrssi %08x buf1 %08x buf2 %08x\n", 3124 device_xname(sc->sc_dev), 3125 rxstat, ctlrssi, 3126 le32toh(sc->sc_rxdescs[i].ar_buf1), 3127 le32toh(sc->sc_rxdescs[i].ar_buf2))); 3128 3129 /* 3130 * Make sure the packet fits in one buffer. This should 3131 * always be the case. 3132 */ 3133 if ((rxstat & (ATW_RXSTAT_FS | ATW_RXSTAT_LS)) != 3134 (ATW_RXSTAT_FS | ATW_RXSTAT_LS)) { 3135 printf("%s: incoming packet spilled, resetting\n", 3136 device_xname(sc->sc_dev)); 3137 (void)atw_init(ifp); 3138 return; 3139 } 3140 3141 /* 3142 * If an error occurred, update stats, clear the status 3143 * word, and leave the packet buffer in place. It will 3144 * simply be reused the next time the ring comes around. 3145 */ 3146 if ((rxstat & (ATW_RXSTAT_DE | ATW_RXSTAT_RXTOE)) != 0) { 3147 #define PRINTERR(bit, str) \ 3148 if (rxstat & (bit)) \ 3149 aprint_error_dev(sc->sc_dev, "receive error: %s\n", \ 3150 str) 3151 if_statinc(ifp, if_ierrors); 3152 PRINTERR(ATW_RXSTAT_DE, "descriptor error"); 3153 PRINTERR(ATW_RXSTAT_RXTOE, "time-out"); 3154 #if 0 3155 PRINTERR(ATW_RXSTAT_SFDE, "PLCP SFD error"); 3156 PRINTERR(ATW_RXSTAT_SIGE, "PLCP signal error"); 3157 PRINTERR(ATW_RXSTAT_CRC16E, "PLCP CRC16 error"); 3158 PRINTERR(ATW_RXSTAT_ICVE, "WEP ICV error"); 3159 #endif 3160 #undef PRINTERR 3161 atw_init_rxdesc(sc, i); 3162 continue; 3163 } 3164 3165 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, 3166 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD); 3167 3168 /* 3169 * No errors; receive the packet. Note the ADM8211 3170 * includes the CRC in promiscuous mode. 3171 */ 3172 len = __SHIFTOUT(rxstat, ATW_RXSTAT_FL_MASK); 3173 3174 /* 3175 * Allocate a new mbuf cluster. If that fails, we are 3176 * out of memory, and must drop the packet and recycle 3177 * the buffer that's already attached to this descriptor. 3178 */ 3179 m = rxs->rxs_mbuf; 3180 if (atw_add_rxbuf(sc, i) != 0) { 3181 if_statinc(ifp, if_ierrors); 3182 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, 3183 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); 3184 atw_init_rxdesc(sc, i); 3185 continue; 3186 } 3187 3188 if_statinc(ifp, if_ipackets); 3189 m_set_rcvif(m, ifp); 3190 m->m_pkthdr.len = m->m_len = MIN(m->m_ext.ext_size, len); 3191 3192 rate = (rate0 < __arraycount(rate_tbl)) ? rate_tbl[rate0] : 0; 3193 3194 /* The RSSI comes straight from a register in the 3195 * baseband processor. I know that for the RF3000, 3196 * the RSSI register also contains the antenna-selection 3197 * bits. Mask those off. 3198 * 3199 * TBD Treat other basebands. 3200 * TBD Use short-preamble bit and such in RF3000_RXSTAT. 3201 */ 3202 if (sc->sc_bbptype == ATW_BBPTYPE_RFMD) 3203 rssi = ctlrssi & RF3000_RSSI_MASK; 3204 else 3205 rssi = ctlrssi; 3206 3207 s = splnet(); 3208 3209 /* Pass this up to any BPF listeners. */ 3210 if (sc->sc_radiobpf != NULL) { 3211 struct atw_rx_radiotap_header *tap = &sc->sc_rxtap; 3212 3213 tap->ar_rate = rate; 3214 3215 /* TBD verify units are dB */ 3216 tap->ar_antsignal = (int)rssi; 3217 if (sc->sc_opmode & ATW_NAR_PR) 3218 tap->ar_flags = IEEE80211_RADIOTAP_F_FCS; 3219 else 3220 tap->ar_flags = 0; 3221 3222 if ((rxstat & ATW_RXSTAT_CRC32E) != 0) 3223 tap->ar_flags |= IEEE80211_RADIOTAP_F_BADFCS; 3224 3225 bpf_mtap2(sc->sc_radiobpf, tap, sizeof(sc->sc_rxtapu), 3226 m, BPF_D_IN); 3227 } 3228 3229 sc->sc_recv_ev.ev_count++; 3230 3231 if ((rxstat & (ATW_RXSTAT_CRC16E | ATW_RXSTAT_CRC32E | 3232 ATW_RXSTAT_ICVE | ATW_RXSTAT_SFDE | ATW_RXSTAT_SIGE)) 3233 != 0) { 3234 if (rxstat & ATW_RXSTAT_CRC16E) 3235 sc->sc_crc16e_ev.ev_count++; 3236 if (rxstat & ATW_RXSTAT_CRC32E) 3237 sc->sc_crc32e_ev.ev_count++; 3238 if (rxstat & ATW_RXSTAT_ICVE) 3239 sc->sc_icve_ev.ev_count++; 3240 if (rxstat & ATW_RXSTAT_SFDE) 3241 sc->sc_sfde_ev.ev_count++; 3242 if (rxstat & ATW_RXSTAT_SIGE) 3243 sc->sc_sige_ev.ev_count++; 3244 if_statinc(ifp, if_ierrors); 3245 m_freem(m); 3246 splx(s); 3247 continue; 3248 } 3249 3250 if (sc->sc_opmode & ATW_NAR_PR) 3251 m_adj(m, -IEEE80211_CRC_LEN); 3252 3253 wh = mtod(m, struct ieee80211_frame_min *); 3254 ni = ieee80211_find_rxnode(ic, wh); 3255 #if 0 3256 if (atw_hw_decrypted(sc, wh)) { 3257 wh->i_fc[1] &= ~IEEE80211_FC1_WEP; 3258 DPRINTF(sc, ("%s: hw decrypted\n", __func__)); 3259 } 3260 #endif 3261 ieee80211_input(ic, m, ni, (int)rssi, 0); 3262 ieee80211_free_node(ni); 3263 splx(s); 3264 } 3265 } 3266 3267 /* 3268 * atw_txintr: 3269 * 3270 * Helper; handle transmit interrupts. 3271 */ 3272 void 3273 atw_txintr(struct atw_softc *sc, uint32_t status) 3274 { 3275 static char txstat_buf[sizeof("ffffffff<>" ATW_TXSTAT_FMT)]; 3276 struct ifnet *ifp = &sc->sc_if; 3277 struct atw_txsoft *txs; 3278 uint32_t txstat; 3279 int s; 3280 3281 DPRINTF3(sc, ("%s: atw_txintr: sc_flags 0x%08x\n", 3282 device_xname(sc->sc_dev), sc->sc_flags)); 3283 3284 s = splnet(); 3285 3286 /* 3287 * Go through our Tx list and free mbufs for those 3288 * frames that have been transmitted. 3289 */ 3290 while ((txs = SIMPLEQ_FIRST(&sc->sc_txdirtyq)) != NULL) { 3291 ATW_CDTXSYNC(sc, txs->txs_lastdesc, 1, 3292 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 3293 3294 #ifdef ATW_DEBUG 3295 if ((ifp->if_flags & IFF_DEBUG) != 0 && atw_debug > 2) { 3296 int i; 3297 printf(" txsoft %p transmit chain:\n", txs); 3298 ATW_CDTXSYNC(sc, txs->txs_firstdesc, 3299 txs->txs_ndescs - 1, 3300 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 3301 for (i = txs->txs_firstdesc;; i = ATW_NEXTTX(i)) { 3302 printf(" descriptor %d:\n", i); 3303 printf(" at_status: 0x%08x\n", 3304 le32toh(sc->sc_txdescs[i].at_stat)); 3305 printf(" at_flags: 0x%08x\n", 3306 le32toh(sc->sc_txdescs[i].at_flags)); 3307 printf(" at_buf1: 0x%08x\n", 3308 le32toh(sc->sc_txdescs[i].at_buf1)); 3309 printf(" at_buf2: 0x%08x\n", 3310 le32toh(sc->sc_txdescs[i].at_buf2)); 3311 if (i == txs->txs_lastdesc) 3312 break; 3313 } 3314 ATW_CDTXSYNC(sc, txs->txs_firstdesc, 3315 txs->txs_ndescs - 1, BUS_DMASYNC_PREREAD); 3316 } 3317 #endif 3318 3319 txstat = le32toh(sc->sc_txdescs[txs->txs_lastdesc].at_stat); 3320 if (txstat & ATW_TXSTAT_OWN) { 3321 ATW_CDTXSYNC(sc, txs->txs_lastdesc, 1, 3322 BUS_DMASYNC_PREREAD); 3323 break; 3324 } 3325 3326 SIMPLEQ_REMOVE_HEAD(&sc->sc_txdirtyq, txs_q); 3327 3328 bus_dmamap_sync(sc->sc_dmat, txs->txs_dmamap, 3329 0, txs->txs_dmamap->dm_mapsize, 3330 BUS_DMASYNC_POSTWRITE); 3331 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 3332 m_freem(txs->txs_mbuf); 3333 txs->txs_mbuf = NULL; 3334 3335 sc->sc_txfree += txs->txs_ndescs; 3336 SIMPLEQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q); 3337 3338 KASSERT(!SIMPLEQ_EMPTY(&sc->sc_txfreeq) && sc->sc_txfree != 0); 3339 sc->sc_tx_timer = 0; 3340 ifp->if_flags &= ~IFF_OACTIVE; 3341 3342 if ((ifp->if_flags & IFF_DEBUG) != 0 && 3343 (txstat & ATW_TXSTAT_ERRMASK) != 0) { 3344 snprintb(txstat_buf, sizeof(txstat_buf), 3345 ATW_TXSTAT_FMT, txstat & ATW_TXSTAT_ERRMASK); 3346 printf("%s: txstat %s %" __PRIuBITS "\n", 3347 device_xname(sc->sc_dev), txstat_buf, 3348 __SHIFTOUT(txstat, ATW_TXSTAT_ARC_MASK)); 3349 } 3350 3351 sc->sc_xmit_ev.ev_count++; 3352 3353 /* 3354 * Check for errors and collisions. 3355 */ 3356 if (txstat & ATW_TXSTAT_TUF) 3357 sc->sc_tuf_ev.ev_count++; 3358 if (txstat & ATW_TXSTAT_TLT) 3359 sc->sc_tlt_ev.ev_count++; 3360 if (txstat & ATW_TXSTAT_TRT) 3361 sc->sc_trt_ev.ev_count++; 3362 if (txstat & ATW_TXSTAT_TRO) 3363 sc->sc_tro_ev.ev_count++; 3364 if (txstat & ATW_TXSTAT_SOFBR) 3365 sc->sc_sofbr_ev.ev_count++; 3366 3367 if ((txstat & ATW_TXSTAT_ES) == 0) 3368 if_statadd(ifp, if_collisions, 3369 __SHIFTOUT(txstat, ATW_TXSTAT_ARC_MASK)); 3370 else 3371 if_statinc(ifp, if_oerrors); 3372 3373 if_statinc(ifp, if_opackets); 3374 } 3375 3376 KASSERT(txs != NULL || (ifp->if_flags & IFF_OACTIVE) == 0); 3377 3378 splx(s); 3379 } 3380 3381 /* 3382 * atw_watchdog: [ifnet interface function] 3383 * 3384 * Watchdog timer handler. 3385 */ 3386 void 3387 atw_watchdog(struct ifnet *ifp) 3388 { 3389 struct atw_softc *sc = ifp->if_softc; 3390 struct ieee80211com *ic = &sc->sc_ic; 3391 3392 ifp->if_timer = 0; 3393 if (!device_is_active(sc->sc_dev)) 3394 return; 3395 3396 if (sc->sc_rescan_timer != 0 && --sc->sc_rescan_timer == 0) 3397 (void)ieee80211_new_state(ic, IEEE80211_S_SCAN, -1); 3398 if (sc->sc_tx_timer != 0 && --sc->sc_tx_timer == 0 && 3399 !SIMPLEQ_EMPTY(&sc->sc_txdirtyq)) { 3400 printf("%s: transmit timeout\n", ifp->if_xname); 3401 if_statinc(ifp, if_oerrors); 3402 (void)atw_init(ifp); 3403 atw_start(ifp); 3404 } 3405 if (sc->sc_tx_timer != 0 || sc->sc_rescan_timer != 0) 3406 ifp->if_timer = 1; 3407 ieee80211_watchdog(ic); 3408 } 3409 3410 static void 3411 atw_evcnt_detach(struct atw_softc *sc) 3412 { 3413 evcnt_detach(&sc->sc_sige_ev); 3414 evcnt_detach(&sc->sc_sfde_ev); 3415 evcnt_detach(&sc->sc_icve_ev); 3416 evcnt_detach(&sc->sc_crc32e_ev); 3417 evcnt_detach(&sc->sc_crc16e_ev); 3418 evcnt_detach(&sc->sc_recv_ev); 3419 3420 evcnt_detach(&sc->sc_tuf_ev); 3421 evcnt_detach(&sc->sc_tro_ev); 3422 evcnt_detach(&sc->sc_trt_ev); 3423 evcnt_detach(&sc->sc_tlt_ev); 3424 evcnt_detach(&sc->sc_sofbr_ev); 3425 evcnt_detach(&sc->sc_xmit_ev); 3426 3427 evcnt_detach(&sc->sc_rxpkt1in_ev); 3428 evcnt_detach(&sc->sc_rxamatch_ev); 3429 evcnt_detach(&sc->sc_workaround1_ev); 3430 evcnt_detach(&sc->sc_misc_ev); 3431 } 3432 3433 static void 3434 atw_evcnt_attach(struct atw_softc *sc) 3435 { 3436 evcnt_attach_dynamic(&sc->sc_recv_ev, EVCNT_TYPE_MISC, 3437 NULL, sc->sc_if.if_xname, "recv"); 3438 evcnt_attach_dynamic(&sc->sc_crc16e_ev, EVCNT_TYPE_MISC, 3439 &sc->sc_recv_ev, sc->sc_if.if_xname, "CRC16 error"); 3440 evcnt_attach_dynamic(&sc->sc_crc32e_ev, EVCNT_TYPE_MISC, 3441 &sc->sc_recv_ev, sc->sc_if.if_xname, "CRC32 error"); 3442 evcnt_attach_dynamic(&sc->sc_icve_ev, EVCNT_TYPE_MISC, 3443 &sc->sc_recv_ev, sc->sc_if.if_xname, "ICV error"); 3444 evcnt_attach_dynamic(&sc->sc_sfde_ev, EVCNT_TYPE_MISC, 3445 &sc->sc_recv_ev, sc->sc_if.if_xname, "PLCP SFD error"); 3446 evcnt_attach_dynamic(&sc->sc_sige_ev, EVCNT_TYPE_MISC, 3447 &sc->sc_recv_ev, sc->sc_if.if_xname, "PLCP Signal Field error"); 3448 3449 evcnt_attach_dynamic(&sc->sc_xmit_ev, EVCNT_TYPE_MISC, 3450 NULL, sc->sc_if.if_xname, "xmit"); 3451 evcnt_attach_dynamic(&sc->sc_tuf_ev, EVCNT_TYPE_MISC, 3452 &sc->sc_xmit_ev, sc->sc_if.if_xname, "transmit underflow"); 3453 evcnt_attach_dynamic(&sc->sc_tro_ev, EVCNT_TYPE_MISC, 3454 &sc->sc_xmit_ev, sc->sc_if.if_xname, "transmit overrun"); 3455 evcnt_attach_dynamic(&sc->sc_trt_ev, EVCNT_TYPE_MISC, 3456 &sc->sc_xmit_ev, sc->sc_if.if_xname, "retry count exceeded"); 3457 evcnt_attach_dynamic(&sc->sc_tlt_ev, EVCNT_TYPE_MISC, 3458 &sc->sc_xmit_ev, sc->sc_if.if_xname, "lifetime exceeded"); 3459 evcnt_attach_dynamic(&sc->sc_sofbr_ev, EVCNT_TYPE_MISC, 3460 &sc->sc_xmit_ev, sc->sc_if.if_xname, "packet size mismatch"); 3461 3462 evcnt_attach_dynamic(&sc->sc_misc_ev, EVCNT_TYPE_MISC, 3463 NULL, sc->sc_if.if_xname, "misc"); 3464 evcnt_attach_dynamic(&sc->sc_workaround1_ev, EVCNT_TYPE_MISC, 3465 &sc->sc_misc_ev, sc->sc_if.if_xname, "workaround #1"); 3466 evcnt_attach_dynamic(&sc->sc_rxamatch_ev, EVCNT_TYPE_MISC, 3467 &sc->sc_misc_ev, sc->sc_if.if_xname, "rra equals rwa"); 3468 evcnt_attach_dynamic(&sc->sc_rxpkt1in_ev, EVCNT_TYPE_MISC, 3469 &sc->sc_misc_ev, sc->sc_if.if_xname, "rxpkt1in set"); 3470 } 3471 3472 #ifdef ATW_DEBUG 3473 static void 3474 atw_dump_pkt(struct ifnet *ifp, struct mbuf *m0) 3475 { 3476 struct atw_softc *sc = ifp->if_softc; 3477 struct mbuf *m; 3478 int i, noctets = 0; 3479 3480 printf("%s: %d-byte packet\n", device_xname(sc->sc_dev), 3481 m0->m_pkthdr.len); 3482 3483 for (m = m0; m; m = m->m_next) { 3484 if (m->m_len == 0) 3485 continue; 3486 for (i = 0; i < m->m_len; i++) { 3487 printf(" %02x", ((uint8_t*)m->m_data)[i]); 3488 if (++noctets % 24 == 0) 3489 printf("\n"); 3490 } 3491 } 3492 printf("%s%s: %d bytes emitted\n", 3493 (noctets % 24 != 0) ? "\n" : "", device_xname(sc->sc_dev), noctets); 3494 } 3495 #endif /* ATW_DEBUG */ 3496 3497 /* 3498 * atw_start: [ifnet interface function] 3499 * 3500 * Start packet transmission on the interface. 3501 */ 3502 void 3503 atw_start(struct ifnet *ifp) 3504 { 3505 struct atw_softc *sc = ifp->if_softc; 3506 struct ieee80211_key *k; 3507 struct ieee80211com *ic = &sc->sc_ic; 3508 struct ieee80211_node *ni; 3509 struct ieee80211_frame_min *whm; 3510 struct ieee80211_frame *wh; 3511 struct atw_frame *hh; 3512 uint16_t hdrctl; 3513 struct mbuf *m0, *m; 3514 struct atw_txsoft *txs; 3515 struct atw_txdesc *txd; 3516 int npkt, rate; 3517 bus_dmamap_t dmamap; 3518 int ctl, error, firsttx, nexttx, lasttx, first, ofree, seg; 3519 3520 DPRINTF2(sc, ("%s: atw_start: sc_flags 0x%08x, if_flags 0x%08x\n", 3521 device_xname(sc->sc_dev), sc->sc_flags, ifp->if_flags)); 3522 3523 if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING) 3524 return; 3525 3526 /* 3527 * Remember the previous number of free descriptors and 3528 * the first descriptor we'll use. 3529 */ 3530 ofree = sc->sc_txfree; 3531 firsttx = lasttx = sc->sc_txnext; 3532 3533 DPRINTF2(sc, ("%s: atw_start: txfree %d, txnext %d\n", 3534 device_xname(sc->sc_dev), ofree, firsttx)); 3535 3536 /* 3537 * Loop through the send queue, setting up transmit descriptors 3538 * until we drain the queue, or use up all available transmit 3539 * descriptors. 3540 */ 3541 while ((txs = SIMPLEQ_FIRST(&sc->sc_txfreeq)) != NULL && 3542 sc->sc_txfree != 0) { 3543 3544 hdrctl = htole16(ATW_HDRCTL_UNKNOWN1); 3545 3546 /* 3547 * Grab a packet off the management queue, if it 3548 * is not empty. Otherwise, from the data queue. 3549 */ 3550 IF_DEQUEUE(&ic->ic_mgtq, m0); 3551 if (m0 != NULL) { 3552 ni = M_GETCTX(m0, struct ieee80211_node *); 3553 M_CLEARCTX(m0); 3554 } else if (ic->ic_state != IEEE80211_S_RUN) 3555 break; /* send no data until associated */ 3556 else { 3557 IFQ_DEQUEUE(&ifp->if_snd, m0); 3558 if (m0 == NULL) 3559 break; 3560 bpf_mtap(ifp, m0, BPF_D_OUT); 3561 ni = ieee80211_find_txnode(ic, 3562 mtod(m0, struct ether_header *)->ether_dhost); 3563 if (ni == NULL) { 3564 if_statinc(ifp, if_oerrors); 3565 break; 3566 } 3567 if ((m0 = ieee80211_encap(ic, m0, ni)) == NULL) { 3568 ieee80211_free_node(ni); 3569 if_statinc(ifp, if_oerrors); 3570 break; 3571 } 3572 } 3573 3574 rate = MAX(ieee80211_get_rate(ni), 2); 3575 3576 whm = mtod(m0, struct ieee80211_frame_min *); 3577 3578 if ((whm->i_fc[1] & IEEE80211_FC1_WEP) == 0) 3579 k = NULL; 3580 else if ((k = ieee80211_crypto_encap(ic, ni, m0)) == NULL) { 3581 m_freem(m0); 3582 ieee80211_free_node(ni); 3583 if_statinc(ifp, if_oerrors); 3584 break; 3585 } 3586 #if 0 3587 if (IEEE80211_IS_MULTICAST(wh->i_addr1) && 3588 m0->m_pkthdr.len > ic->ic_fragthreshold) 3589 hdrctl |= htole16(ATW_HDRCTL_MORE_FRAG); 3590 #endif 3591 3592 if (m0->m_pkthdr.len + IEEE80211_CRC_LEN >= ic->ic_rtsthreshold) 3593 hdrctl |= htole16(ATW_HDRCTL_RTSCTS); 3594 3595 if (ieee80211_compute_duration(whm, k, m0->m_pkthdr.len, 3596 ic->ic_flags, ic->ic_fragthreshold, rate, 3597 &txs->txs_d0, &txs->txs_dn, &npkt, 0) == -1) { 3598 DPRINTF2(sc, ("%s: fail compute duration\n", __func__)); 3599 m_freem(m0); 3600 break; 3601 } 3602 3603 /* XXX Misleading if fragmentation is enabled. Better 3604 * to fragment in software? 3605 */ 3606 *(uint16_t *)whm->i_dur = htole16(txs->txs_d0.d_rts_dur); 3607 3608 /* 3609 * Pass the packet to any BPF listeners. 3610 */ 3611 bpf_mtap3(ic->ic_rawbpf, m0, BPF_D_OUT); 3612 3613 if (sc->sc_radiobpf != NULL) { 3614 struct atw_tx_radiotap_header *tap = &sc->sc_txtap; 3615 3616 tap->at_rate = rate; 3617 3618 bpf_mtap2(sc->sc_radiobpf, tap, sizeof(sc->sc_txtapu), 3619 m0, BPF_D_OUT); 3620 } 3621 3622 M_PREPEND(m0, offsetof(struct atw_frame, atw_ihdr), M_DONTWAIT); 3623 3624 if (ni != NULL) 3625 ieee80211_free_node(ni); 3626 3627 if (m0 == NULL) { 3628 if_statinc(ifp, if_oerrors); 3629 break; 3630 } 3631 3632 /* just to make sure. */ 3633 m0 = m_pullup(m0, sizeof(struct atw_frame)); 3634 3635 if (m0 == NULL) { 3636 if_statinc(ifp, if_oerrors); 3637 break; 3638 } 3639 3640 hh = mtod(m0, struct atw_frame *); 3641 wh = &hh->atw_ihdr; 3642 3643 /* Copy everything we need from the 802.11 header: 3644 * Frame Control; address 1, address 3, or addresses 3645 * 3 and 4. NIC fills in BSSID, SA. 3646 */ 3647 if (wh->i_fc[1] & IEEE80211_FC1_DIR_TODS) { 3648 if (wh->i_fc[1] & IEEE80211_FC1_DIR_FROMDS) 3649 panic("%s: illegal WDS frame", 3650 device_xname(sc->sc_dev)); 3651 memcpy(hh->atw_dst, wh->i_addr3, IEEE80211_ADDR_LEN); 3652 } else 3653 memcpy(hh->atw_dst, wh->i_addr1, IEEE80211_ADDR_LEN); 3654 3655 *(uint16_t*)hh->atw_fc = *(uint16_t*)wh->i_fc; 3656 3657 /* initialize remaining Tx parameters */ 3658 memset(&hh->u, 0, sizeof(hh->u)); 3659 3660 hh->atw_rate = rate * 5; 3661 /* XXX this could be incorrect if M_FCS. _encap should 3662 * probably strip FCS just in case it sticks around in 3663 * bridged packets. 3664 */ 3665 hh->atw_service = 0x00; /* XXX guess */ 3666 hh->atw_paylen = htole16(m0->m_pkthdr.len - 3667 sizeof(struct atw_frame)); 3668 3669 /* never fragment multicast frames */ 3670 if (IEEE80211_IS_MULTICAST(hh->atw_dst)) 3671 hh->atw_fragthr = htole16(IEEE80211_FRAG_MAX); 3672 else { 3673 if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && 3674 (ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE)) 3675 hdrctl |= htole16(ATW_HDRCTL_SHORT_PREAMBLE); 3676 hh->atw_fragthr = htole16(ic->ic_fragthreshold); 3677 } 3678 3679 hh->atw_rtylmt = 3; 3680 #if 0 3681 if (do_encrypt) { 3682 hdrctl |= htole16(ATW_HDRCTL_WEP); 3683 hh->atw_keyid = ic->ic_def_txkey; 3684 } 3685 #endif 3686 3687 hh->atw_head_plcplen = htole16(txs->txs_d0.d_plcp_len); 3688 hh->atw_tail_plcplen = htole16(txs->txs_dn.d_plcp_len); 3689 if (txs->txs_d0.d_residue) 3690 hh->atw_head_plcplen |= htole16(0x8000); 3691 if (txs->txs_dn.d_residue) 3692 hh->atw_tail_plcplen |= htole16(0x8000); 3693 hh->atw_head_dur = htole16(txs->txs_d0.d_rts_dur); 3694 hh->atw_tail_dur = htole16(txs->txs_dn.d_rts_dur); 3695 3696 hh->atw_hdrctl = hdrctl; 3697 hh->atw_fragnum = npkt << 4; 3698 #ifdef ATW_DEBUG 3699 3700 if ((ifp->if_flags & IFF_DEBUG) != 0 && atw_debug > 2) { 3701 printf("%s: dst = %s, rate = 0x%02x, " 3702 "service = 0x%02x, paylen = 0x%04x\n", 3703 device_xname(sc->sc_dev), ether_sprintf(hh->atw_dst), 3704 hh->atw_rate, hh->atw_service, hh->atw_paylen); 3705 3706 printf("%s: fc[0] = 0x%02x, fc[1] = 0x%02x, " 3707 "dur1 = 0x%04x, dur2 = 0x%04x, " 3708 "dur3 = 0x%04x, rts_dur = 0x%04x\n", 3709 device_xname(sc->sc_dev), hh->atw_fc[0], hh->atw_fc[1], 3710 hh->atw_tail_plcplen, hh->atw_head_plcplen, 3711 hh->atw_tail_dur, hh->atw_head_dur); 3712 3713 printf("%s: hdrctl = 0x%04x, fragthr = 0x%04x, " 3714 "fragnum = 0x%02x, rtylmt = 0x%04x\n", 3715 device_xname(sc->sc_dev), hh->atw_hdrctl, 3716 hh->atw_fragthr, hh->atw_fragnum, hh->atw_rtylmt); 3717 3718 printf("%s: keyid = %d\n", 3719 device_xname(sc->sc_dev), hh->atw_keyid); 3720 3721 atw_dump_pkt(ifp, m0); 3722 } 3723 #endif /* ATW_DEBUG */ 3724 3725 dmamap = txs->txs_dmamap; 3726 3727 /* 3728 * Load the DMA map. Copy and try (once) again if the packet 3729 * didn't fit in the alloted number of segments. 3730 */ 3731 for (first = 1; 3732 (error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0, 3733 BUS_DMA_WRITE | BUS_DMA_NOWAIT)) != 0 && first; 3734 first = 0) { 3735 MGETHDR(m, M_DONTWAIT, MT_DATA); 3736 if (m == NULL) { 3737 aprint_error_dev(sc->sc_dev, "unable to allocate Tx mbuf\n"); 3738 break; 3739 } 3740 if (m0->m_pkthdr.len > MHLEN) { 3741 MCLGET(m, M_DONTWAIT); 3742 if ((m->m_flags & M_EXT) == 0) { 3743 aprint_error_dev(sc->sc_dev, "unable to allocate Tx " 3744 "cluster\n"); 3745 m_freem(m); 3746 break; 3747 } 3748 } 3749 m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, void *)); 3750 m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len; 3751 m_freem(m0); 3752 m0 = m; 3753 m = NULL; 3754 } 3755 if (error != 0) { 3756 aprint_error_dev(sc->sc_dev, "unable to load Tx buffer, " 3757 "error = %d\n", error); 3758 m_freem(m0); 3759 break; 3760 } 3761 3762 /* 3763 * Ensure we have enough descriptors free to describe 3764 * the packet. 3765 */ 3766 if (dmamap->dm_nsegs > sc->sc_txfree) { 3767 /* 3768 * Not enough free descriptors to transmit 3769 * this packet. Unload the DMA map and 3770 * drop the packet. Notify the upper layer 3771 * that there are no more slots left. 3772 * 3773 * XXX We could allocate an mbuf and copy, but 3774 * XXX it is worth it? 3775 */ 3776 bus_dmamap_unload(sc->sc_dmat, dmamap); 3777 m_freem(m0); 3778 break; 3779 } 3780 3781 /* 3782 * WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET. 3783 */ 3784 3785 /* Sync the DMA map. */ 3786 bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, 3787 BUS_DMASYNC_PREWRITE); 3788 3789 /* XXX arbitrary retry limit; 8 because I have seen it in 3790 * use already and maybe 0 means "no tries" ! 3791 */ 3792 ctl = htole32(__SHIFTIN(8, ATW_TXCTL_TL_MASK)); 3793 3794 DPRINTF2(sc, ("%s: TXDR <- max(10, %d)\n", 3795 device_xname(sc->sc_dev), rate * 5)); 3796 ctl |= htole32(__SHIFTIN(MAX(10, rate * 5), ATW_TXCTL_TXDR_MASK)); 3797 3798 /* 3799 * Initialize the transmit descriptors. 3800 */ 3801 for (nexttx = sc->sc_txnext, seg = 0; 3802 seg < dmamap->dm_nsegs; 3803 seg++, nexttx = ATW_NEXTTX(nexttx)) { 3804 /* 3805 * If this is the first descriptor we're 3806 * enqueueing, don't set the OWN bit just 3807 * yet. That could cause a race condition. 3808 * We'll do it below. 3809 */ 3810 txd = &sc->sc_txdescs[nexttx]; 3811 txd->at_ctl = ctl | 3812 ((nexttx == firsttx) ? 0 : htole32(ATW_TXCTL_OWN)); 3813 3814 txd->at_buf1 = htole32(dmamap->dm_segs[seg].ds_addr); 3815 txd->at_flags = 3816 htole32(__SHIFTIN(dmamap->dm_segs[seg].ds_len, 3817 ATW_TXFLAG_TBS1_MASK)) | 3818 ((nexttx == (ATW_NTXDESC - 1)) 3819 ? htole32(ATW_TXFLAG_TER) : 0); 3820 lasttx = nexttx; 3821 } 3822 3823 /* Set `first segment' and `last segment' appropriately. */ 3824 sc->sc_txdescs[sc->sc_txnext].at_flags |= 3825 htole32(ATW_TXFLAG_FS); 3826 sc->sc_txdescs[lasttx].at_flags |= htole32(ATW_TXFLAG_LS); 3827 3828 #ifdef ATW_DEBUG 3829 if ((ifp->if_flags & IFF_DEBUG) != 0 && atw_debug > 2) { 3830 printf(" txsoft %p transmit chain:\n", txs); 3831 for (seg = sc->sc_txnext;; seg = ATW_NEXTTX(seg)) { 3832 printf(" descriptor %d:\n", seg); 3833 printf(" at_ctl: 0x%08x\n", 3834 le32toh(sc->sc_txdescs[seg].at_ctl)); 3835 printf(" at_flags: 0x%08x\n", 3836 le32toh(sc->sc_txdescs[seg].at_flags)); 3837 printf(" at_buf1: 0x%08x\n", 3838 le32toh(sc->sc_txdescs[seg].at_buf1)); 3839 printf(" at_buf2: 0x%08x\n", 3840 le32toh(sc->sc_txdescs[seg].at_buf2)); 3841 if (seg == lasttx) 3842 break; 3843 } 3844 } 3845 #endif 3846 3847 /* Sync the descriptors we're using. */ 3848 ATW_CDTXSYNC(sc, sc->sc_txnext, dmamap->dm_nsegs, 3849 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 3850 3851 /* 3852 * Store a pointer to the packet so we can free it later, 3853 * and remember what txdirty will be once the packet is 3854 * done. 3855 */ 3856 txs->txs_mbuf = m0; 3857 txs->txs_firstdesc = sc->sc_txnext; 3858 txs->txs_lastdesc = lasttx; 3859 txs->txs_ndescs = dmamap->dm_nsegs; 3860 3861 /* Advance the tx pointer. */ 3862 sc->sc_txfree -= dmamap->dm_nsegs; 3863 sc->sc_txnext = nexttx; 3864 3865 SIMPLEQ_REMOVE_HEAD(&sc->sc_txfreeq, txs_q); 3866 SIMPLEQ_INSERT_TAIL(&sc->sc_txdirtyq, txs, txs_q); 3867 } 3868 3869 if (sc->sc_txfree != ofree) { 3870 DPRINTF2(sc, ("%s: packets enqueued, IC on %d, OWN on %d\n", 3871 device_xname(sc->sc_dev), lasttx, firsttx)); 3872 /* 3873 * Cause a transmit interrupt to happen on the 3874 * last packet we enqueued. 3875 */ 3876 sc->sc_txdescs[lasttx].at_flags |= htole32(ATW_TXFLAG_IC); 3877 ATW_CDTXSYNC(sc, lasttx, 1, 3878 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 3879 3880 /* 3881 * The entire packet chain is set up. Give the 3882 * first descriptor to the chip now. 3883 */ 3884 sc->sc_txdescs[firsttx].at_ctl |= htole32(ATW_TXCTL_OWN); 3885 ATW_CDTXSYNC(sc, firsttx, 1, 3886 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 3887 3888 /* Wake up the transmitter. */ 3889 ATW_WRITE(sc, ATW_TDR, 0x1); 3890 3891 if (txs == NULL || sc->sc_txfree == 0) 3892 ifp->if_flags |= IFF_OACTIVE; 3893 3894 /* Set a watchdog timer in case the chip flakes out. */ 3895 sc->sc_tx_timer = 5; 3896 ifp->if_timer = 1; 3897 } 3898 } 3899 3900 /* 3901 * atw_ioctl: [ifnet interface function] 3902 * 3903 * Handle control requests from the operator. 3904 */ 3905 int 3906 atw_ioctl(struct ifnet *ifp, u_long cmd, void *data) 3907 { 3908 struct atw_softc *sc = ifp->if_softc; 3909 struct ieee80211req *ireq; 3910 int s, error = 0; 3911 3912 s = splnet(); 3913 3914 switch (cmd) { 3915 case SIOCSIFFLAGS: 3916 if ((error = ifioctl_common(ifp, cmd, data)) != 0) 3917 break; 3918 switch (ifp->if_flags & (IFF_UP | IFF_RUNNING)) { 3919 case IFF_UP | IFF_RUNNING: 3920 /* 3921 * To avoid rescanning another access point, 3922 * do not call atw_init() here. Instead, 3923 * only reflect media settings. 3924 */ 3925 if (device_activation(sc->sc_dev, DEVACT_LEVEL_DRIVER)) 3926 atw_filter_setup(sc); 3927 break; 3928 case IFF_UP: 3929 error = atw_init(ifp); 3930 break; 3931 case IFF_RUNNING: 3932 atw_stop(ifp, 1); 3933 break; 3934 case 0: 3935 break; 3936 } 3937 break; 3938 case SIOCADDMULTI: 3939 case SIOCDELMULTI: 3940 if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) { 3941 if (ifp->if_flags & IFF_RUNNING) 3942 atw_filter_setup(sc); /* do not rescan */ 3943 error = 0; 3944 } 3945 break; 3946 case SIOCS80211: 3947 ireq = data; 3948 if (ireq->i_type == IEEE80211_IOC_FRAGTHRESHOLD) { 3949 if ((error = kauth_authorize_network( 3950 kauth_cred_get(), KAUTH_NETWORK_INTERFACE, 3951 KAUTH_REQ_NETWORK_INTERFACE_SETPRIV, ifp, 3952 (void *)cmd, NULL)) != 0) 3953 break; 3954 if (!(IEEE80211_FRAG_MIN <= ireq->i_val && 3955 ireq->i_val <= IEEE80211_FRAG_MAX)) 3956 error = EINVAL; 3957 else 3958 sc->sc_ic.ic_fragthreshold = ireq->i_val; 3959 break; 3960 } 3961 /*FALLTHROUGH*/ 3962 default: 3963 error = ieee80211_ioctl(&sc->sc_ic, cmd, data); 3964 if (error == ENETRESET || error == ERESTART) { 3965 if (is_running(ifp)) 3966 error = atw_init(ifp); 3967 else 3968 error = 0; 3969 } 3970 break; 3971 } 3972 3973 /* Try to get more packets going. */ 3974 if (device_is_active(sc->sc_dev)) 3975 atw_start(ifp); 3976 3977 splx(s); 3978 return (error); 3979 } 3980 3981 static int 3982 atw_media_change(struct ifnet *ifp) 3983 { 3984 int error; 3985 3986 error = ieee80211_media_change(ifp); 3987 if (error == ENETRESET) { 3988 if (is_running(ifp)) 3989 error = atw_init(ifp); 3990 else 3991 error = 0; 3992 } 3993 return error; 3994 } 3995
Indexes created Sat Sep 20 22:09:52 GMT 2025