1 /* $NetBSD: com.c,v 1.388 2025/02/12 05:15:39 imil Exp $ */ 2 3 /*- 4 * Copyright (c) 1998, 1999, 2004, 2008 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Charles M. Hannum. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * Copyright (c) 1991 The Regents of the University of California. 34 * All rights reserved. 35 * 36 * Redistribution and use in source and binary forms, with or without 37 * modification, are permitted provided that the following conditions 38 * are met: 39 * 1. Redistributions of source code must retain the above copyright 40 * notice, this list of conditions and the following disclaimer. 41 * 2. Redistributions in binary form must reproduce the above copyright 42 * notice, this list of conditions and the following disclaimer in the 43 * documentation and/or other materials provided with the distribution. 44 * 3. Neither the name of the University nor the names of its contributors 45 * may be used to endorse or promote products derived from this software 46 * without specific prior written permission. 47 * 48 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 49 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 50 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 51 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 52 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 53 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 54 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 55 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 56 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 57 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 58 * SUCH DAMAGE. 59 * 60 * @(#)com.c 7.5 (Berkeley) 5/16/91 61 */ 62 63 /* 64 * COM driver, uses National Semiconductor NS16450/NS16550AF UART 65 * Supports automatic hardware flow control on StarTech ST16C650A UART 66 * 67 * Lock order: 68 * ttylock (IPL_VM) 69 * -> sc->sc_lock (IPL_HIGH) 70 * -> timecounter_lock (IPL_HIGH) 71 */ 72 73 #include <sys/cdefs.h> 74 __KERNEL_RCSID(0, "$NetBSD: com.c,v 1.388 2025/02/12 05:15:39 imil Exp $"); 75 76 #include "opt_com.h" 77 #include "opt_ddb.h" 78 #include "opt_kgdb.h" 79 #include "opt_lockdebug.h" 80 #include "opt_multiprocessor.h" 81 #include "opt_ntp.h" 82 83 /* The COM16650 option was renamed to COM_16650. */ 84 #ifdef COM16650 85 #error Obsolete COM16650 option; use COM_16650 instead. 86 #endif 87 88 /* 89 * Override cnmagic(9) macro before including <sys/systm.h>. 90 * We need to know if cn_check_magic triggered debugger, so set a flag. 91 * Callers of cn_check_magic must declare int cn_trapped = 0; 92 * XXX: this is *ugly*! 93 */ 94 #define cn_trap() \ 95 do { \ 96 console_debugger(); \ 97 cn_trapped = 1; \ 98 (void)cn_trapped; \ 99 } while (/* CONSTCOND */ 0) 100 101 #include <sys/param.h> 102 #include <sys/systm.h> 103 #include <sys/ioctl.h> 104 #include <sys/select.h> 105 #include <sys/poll.h> 106 #include <sys/tty.h> 107 #include <sys/proc.h> 108 #include <sys/conf.h> 109 #include <sys/file.h> 110 #include <sys/uio.h> 111 #include <sys/kernel.h> 112 #include <sys/syslog.h> 113 #include <sys/device.h> 114 #include <sys/malloc.h> 115 #include <sys/timepps.h> 116 #include <sys/vnode.h> 117 #include <sys/kauth.h> 118 #include <sys/intr.h> 119 #ifdef RND_COM 120 #include <sys/rndsource.h> 121 #endif 122 123 #include <sys/bus.h> 124 125 #include <ddb/db_active.h> 126 127 #include <dev/ic/comreg.h> 128 #include <dev/ic/comvar.h> 129 #include <dev/ic/ns16550reg.h> 130 #include <dev/ic/st16650reg.h> 131 #include <dev/ic/hayespreg.h> 132 #define com_lcr com_cfcr 133 #include <dev/cons.h> 134 135 #include "ioconf.h" 136 137 #define CSR_READ_1(r, o) \ 138 (r)->cr_read((r), (r)->cr_map[o]) 139 #define CSR_WRITE_1(r, o, v) \ 140 (r)->cr_write((r), (r)->cr_map[o], (v)) 141 #define CSR_WRITE_MULTI(r, o, p, n) \ 142 (r)->cr_write_multi((r), (r)->cr_map[o], (p), (n)) 143 144 /* 145 * XXX COM_TYPE_AU1x00 specific 146 */ 147 #define CSR_WRITE_2(r, o, v) \ 148 bus_space_write_2((r)->cr_iot, (r)->cr_ioh, (r)->cr_map[o], v) 149 #define CSR_READ_2(r, o) \ 150 bus_space_read_2((r)->cr_iot, (r)->cr_ioh, (r)->cr_map[o]) 151 152 static void com_enable_debugport(struct com_softc *); 153 154 void com_config(struct com_softc *); 155 void com_shutdown(struct com_softc *); 156 int comspeed(long, long, int); 157 static u_char cflag2lcr(tcflag_t); 158 int comparam(struct tty *, struct termios *); 159 void comstart(struct tty *); 160 int comhwiflow(struct tty *, int); 161 162 void com_loadchannelregs(struct com_softc *); 163 void com_hwiflow(struct com_softc *); 164 void com_break(struct com_softc *, int); 165 void com_modem(struct com_softc *, int); 166 void tiocm_to_com(struct com_softc *, u_long, int); 167 int com_to_tiocm(struct com_softc *); 168 void com_iflush(struct com_softc *); 169 170 int com_common_getc(dev_t, struct com_regs *); 171 static void com_common_putc(dev_t, struct com_regs *, int, int); 172 173 int cominit(struct com_regs *, int, int, int, tcflag_t); 174 175 static int comcnreattach(void); 176 177 int comcngetc(dev_t); 178 void comcnputc(dev_t, int); 179 void comcnpollc(dev_t, int); 180 181 void comsoft(void *); 182 static inline void com_rxsoft(struct com_softc *, struct tty *); 183 static inline void com_txsoft(struct com_softc *, struct tty *); 184 static inline void com_stsoft(struct com_softc *, struct tty *); 185 static inline void com_schedrx(struct com_softc *); 186 void comdiag(void *); 187 188 dev_type_open(comopen); 189 dev_type_close(comclose); 190 dev_type_read(comread); 191 dev_type_write(comwrite); 192 dev_type_ioctl(comioctl); 193 dev_type_stop(comstop); 194 dev_type_tty(comtty); 195 dev_type_poll(compoll); 196 197 static struct comcons_info comcons_info; 198 199 /* 200 * Following are all routines needed for COM to act as console 201 */ 202 static struct consdev comcons = { 203 .cn_getc = comcngetc, 204 .cn_putc = comcnputc, 205 .cn_pollc = comcnpollc, 206 .cn_dev = NODEV, 207 .cn_pri = CN_NORMAL 208 }; 209 210 211 const struct cdevsw com_cdevsw = { 212 .d_open = comopen, 213 .d_close = comclose, 214 .d_read = comread, 215 .d_write = comwrite, 216 .d_ioctl = comioctl, 217 .d_stop = comstop, 218 .d_tty = comtty, 219 .d_poll = compoll, 220 .d_mmap = nommap, 221 .d_kqfilter = ttykqfilter, 222 .d_discard = nodiscard, 223 .d_flag = D_TTY 224 }; 225 226 /* 227 * Make this an option variable one can patch. 228 * But be warned: this must be a power of 2! 229 */ 230 u_int com_rbuf_size = COM_RING_SIZE; 231 232 /* Stop input when 3/4 of the ring is full; restart when only 1/4 is full. */ 233 u_int com_rbuf_hiwat = (COM_RING_SIZE * 1) / 4; 234 u_int com_rbuf_lowat = (COM_RING_SIZE * 3) / 4; 235 236 static int comconsattached; 237 static struct cnm_state com_cnm_state; 238 239 #ifdef KGDB 240 #include <sys/kgdb.h> 241 242 static struct com_regs comkgdbregs; 243 static int com_kgdb_attached; 244 245 int com_kgdb_getc(void *); 246 void com_kgdb_putc(void *, int); 247 #endif /* KGDB */ 248 249 /* initializer for typical 16550-ish hardware */ 250 static const bus_size_t com_std_map[COM_REGMAP_NENTRIES] = { 251 [COM_REG_RXDATA] = com_data, 252 [COM_REG_TXDATA] = com_data, 253 [COM_REG_DLBL] = com_dlbl, 254 [COM_REG_DLBH] = com_dlbh, 255 [COM_REG_IER] = com_ier, 256 [COM_REG_IIR] = com_iir, 257 [COM_REG_FIFO] = com_fifo, 258 [COM_REG_TCR] = com_fifo, 259 [COM_REG_EFR] = com_efr, 260 [COM_REG_TLR] = com_efr, 261 [COM_REG_LCR] = com_lcr, 262 [COM_REG_MCR] = com_mcr, 263 [COM_REG_LSR] = com_lsr, 264 [COM_REG_MSR] = com_msr, 265 [COM_REG_USR] = com_usr, 266 [COM_REG_TFL] = com_tfl, 267 [COM_REG_RFL] = com_rfl, 268 [COM_REG_HALT] = com_halt, 269 [COM_REG_MDR1] = com_mdr1, 270 }; 271 272 #define COMDIALOUT_MASK TTDIALOUT_MASK 273 274 #define COMUNIT(x) TTUNIT(x) 275 #define COMDIALOUT(x) TTDIALOUT(x) 276 277 #define COM_ISALIVE(sc) ((sc)->enabled != 0 && \ 278 device_is_active((sc)->sc_dev)) 279 280 #define BR BUS_SPACE_BARRIER_READ 281 #define BW BUS_SPACE_BARRIER_WRITE 282 #define COM_BARRIER(r, f) \ 283 bus_space_barrier((r)->cr_iot, (r)->cr_ioh, 0, (r)->cr_nports, (f)) 284 285 /* 286 * com_read_1 -- 287 * Default register read callback using single byte accesses. 288 */ 289 static uint8_t 290 com_read_1(struct com_regs *regs, u_int reg) 291 { 292 return bus_space_read_1(regs->cr_iot, regs->cr_ioh, reg); 293 } 294 295 /* 296 * com_write_1 -- 297 * Default register write callback using single byte accesses. 298 */ 299 static void 300 com_write_1(struct com_regs *regs, u_int reg, uint8_t val) 301 { 302 bus_space_write_1(regs->cr_iot, regs->cr_ioh, reg, val); 303 } 304 305 /* 306 * com_write_multi_1 -- 307 * Default register multi write callback using single byte accesses. 308 */ 309 static void 310 com_write_multi_1(struct com_regs *regs, u_int reg, const uint8_t *datap, 311 bus_size_t count) 312 { 313 bus_space_write_multi_1(regs->cr_iot, regs->cr_ioh, reg, datap, count); 314 } 315 316 /* 317 * com_read_4 -- 318 * Default register read callback using dword accesses. 319 */ 320 static uint8_t 321 com_read_4(struct com_regs *regs, u_int reg) 322 { 323 return bus_space_read_4(regs->cr_iot, regs->cr_ioh, reg) & 0xff; 324 } 325 326 /* 327 * com_write_4 -- 328 * Default register write callback using dword accesses. 329 */ 330 static void 331 com_write_4(struct com_regs *regs, u_int reg, uint8_t val) 332 { 333 bus_space_write_4(regs->cr_iot, regs->cr_ioh, reg, val); 334 } 335 336 /* 337 * com_write_multi_4 -- 338 * Default register multi write callback using dword accesses. 339 */ 340 static void 341 com_write_multi_4(struct com_regs *regs, u_int reg, const uint8_t *datap, 342 bus_size_t count) 343 { 344 while (count-- > 0) { 345 bus_space_write_4(regs->cr_iot, regs->cr_ioh, reg, *datap++); 346 } 347 } 348 349 /* 350 * com_init_regs -- 351 * Driver front-ends use this to initialize our register map 352 * in the standard fashion. They may then tailor the map to 353 * their own particular requirements. 354 */ 355 void 356 com_init_regs(struct com_regs *regs, bus_space_tag_t st, bus_space_handle_t sh, 357 bus_addr_t addr) 358 { 359 360 memset(regs, 0, sizeof(*regs)); 361 regs->cr_iot = st; 362 regs->cr_ioh = sh; 363 regs->cr_iobase = addr; 364 regs->cr_nports = COM_NPORTS; 365 regs->cr_read = com_read_1; 366 regs->cr_write = com_write_1; 367 regs->cr_write_multi = com_write_multi_1; 368 memcpy(regs->cr_map, com_std_map, sizeof(regs->cr_map)); 369 } 370 371 /* 372 * com_init_regs_stride -- 373 * Convenience function for front-ends that have a stride between 374 * registers. 375 */ 376 void 377 com_init_regs_stride(struct com_regs *regs, bus_space_tag_t st, 378 bus_space_handle_t sh, bus_addr_t addr, u_int regshift) 379 { 380 381 com_init_regs(regs, st, sh, addr); 382 for (size_t i = 0; i < __arraycount(regs->cr_map); i++) { 383 regs->cr_map[i] <<= regshift; 384 } 385 regs->cr_nports <<= regshift; 386 } 387 388 /* 389 * com_init_regs_stride_width -- 390 * Convenience function for front-ends that have a stride between 391 * registers and specific I/O width requirements. 392 */ 393 void 394 com_init_regs_stride_width(struct com_regs *regs, bus_space_tag_t st, 395 bus_space_handle_t sh, bus_addr_t addr, 396 u_int regshift, u_int width) 397 { 398 399 com_init_regs(regs, st, sh, addr); 400 for (size_t i = 0; i < __arraycount(regs->cr_map); i++) { 401 regs->cr_map[i] <<= regshift; 402 } 403 regs->cr_nports <<= regshift; 404 405 switch (width) { 406 case 1: 407 /* Already set by com_init_regs */ 408 break; 409 case 4: 410 regs->cr_read = com_read_4; 411 regs->cr_write = com_write_4; 412 regs->cr_write_multi = com_write_multi_4; 413 break; 414 default: 415 panic("com: unsupported I/O width %d", width); 416 } 417 } 418 419 /*ARGSUSED*/ 420 int 421 comspeed(long speed, long frequency, int type) 422 { 423 #define divrnd(n, q) (((n)*2/(q)+1)/2) /* divide and round off */ 424 425 int x, err; 426 int divisor = 16; 427 428 if ((type == COM_TYPE_OMAP) && (speed > 230400)) { 429 divisor = 13; 430 } 431 432 if (speed == 0) 433 return (0); 434 if (speed < 0) 435 return (-1); 436 x = divrnd(frequency / divisor, speed); 437 if (x <= 0) 438 return (-1); 439 err = divrnd(((quad_t)frequency) * 1000 / divisor, speed * x) - 1000; 440 if (err < 0) 441 err = -err; 442 if (err > COM_TOLERANCE) 443 return (-1); 444 return (x); 445 446 #undef divrnd 447 } 448 449 #ifdef COM_DEBUG 450 int com_debug = 0; 451 452 void comstatus(struct com_softc *, const char *); 453 void 454 comstatus(struct com_softc *sc, const char *str) 455 { 456 struct tty *tp = sc->sc_tty; 457 458 aprint_normal_dev(sc->sc_dev, 459 "%s %cclocal %cdcd %cts_carr_on %cdtr %ctx_stopped\n", 460 str, 461 ISSET(tp->t_cflag, CLOCAL) ? '+' : '-', 462 ISSET(sc->sc_msr, MSR_DCD) ? '+' : '-', 463 ISSET(tp->t_state, TS_CARR_ON) ? '+' : '-', 464 ISSET(sc->sc_mcr, MCR_DTR) ? '+' : '-', 465 sc->sc_tx_stopped ? '+' : '-'); 466 467 aprint_normal_dev(sc->sc_dev, 468 "%s %ccrtscts %ccts %cts_ttstop %crts rx_flags=0x%x\n", 469 str, 470 ISSET(tp->t_cflag, CRTSCTS) ? '+' : '-', 471 ISSET(sc->sc_msr, MSR_CTS) ? '+' : '-', 472 ISSET(tp->t_state, TS_TTSTOP) ? '+' : '-', 473 ISSET(sc->sc_mcr, MCR_RTS) ? '+' : '-', 474 sc->sc_rx_flags); 475 } 476 #endif 477 478 int 479 com_probe_subr(struct com_regs *regs) 480 { 481 482 /* force access to id reg */ 483 CSR_WRITE_1(regs, COM_REG_LCR, LCR_8BITS); 484 CSR_WRITE_1(regs, COM_REG_IIR, 0); 485 if ((CSR_READ_1(regs, COM_REG_LCR) != LCR_8BITS) || 486 (CSR_READ_1(regs, COM_REG_IIR) & 0x38)) 487 return (0); 488 489 return (1); 490 } 491 492 int 493 comprobe1(bus_space_tag_t iot, bus_space_handle_t ioh) 494 { 495 struct com_regs regs; 496 497 com_init_regs(®s, iot, ioh, 0/*XXX*/); 498 499 return com_probe_subr(®s); 500 } 501 502 /* 503 * No locking in this routine; it is only called during attach, 504 * or with the port already locked. 505 */ 506 static void 507 com_enable_debugport(struct com_softc *sc) 508 { 509 510 /* Turn on line break interrupt, set carrier. */ 511 sc->sc_ier = IER_ERLS; 512 if (sc->sc_type == COM_TYPE_PXA2x0) 513 sc->sc_ier |= IER_EUART | IER_ERXTOUT; 514 if (sc->sc_type == COM_TYPE_INGENIC || 515 sc->sc_type == COM_TYPE_TEGRA) 516 sc->sc_ier |= IER_ERXTOUT; 517 CSR_WRITE_1(&sc->sc_regs, COM_REG_IER, sc->sc_ier); 518 SET(sc->sc_mcr, MCR_DTR | MCR_RTS); 519 CSR_WRITE_1(&sc->sc_regs, COM_REG_MCR, sc->sc_mcr); 520 } 521 522 static void 523 com_intr_poll(void *arg) 524 { 525 struct com_softc * const sc = arg; 526 527 comintr(sc); 528 529 callout_schedule(&sc->sc_poll_callout, sc->sc_poll_ticks); 530 } 531 532 void 533 com_attach_subr(struct com_softc *sc) 534 { 535 struct com_regs *regsp = &sc->sc_regs; 536 struct tty *tp; 537 uint32_t cpr; 538 uint8_t lcr; 539 const char *fifo_msg = NULL; 540 prop_dictionary_t dict; 541 bool is_console = true; 542 bool force_console = false; 543 bool skip_attach_delay = false; 544 545 aprint_naive("\n"); 546 547 dict = device_properties(sc->sc_dev); 548 prop_dictionary_get_bool(dict, "is_console", &is_console); 549 prop_dictionary_get_bool(dict, "force_console", &force_console); 550 prop_dictionary_get_bool(dict, "skip_attach_delay", &skip_attach_delay); 551 callout_init(&sc->sc_diag_callout, 0); 552 callout_init(&sc->sc_poll_callout, 0); 553 callout_setfunc(&sc->sc_poll_callout, com_intr_poll, sc); 554 mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_HIGH); 555 556 #if defined(COM_16650) 557 sc->sc_type = COM_TYPE_16650; 558 #elif defined(COM_16750) 559 sc->sc_type = COM_TYPE_16750; 560 #elif defined(COM_HAYESP) 561 sc->sc_type = COM_TYPE_HAYESP; 562 #elif defined(COM_PXA2X0) 563 sc->sc_type = COM_TYPE_PXA2x0; 564 #endif 565 566 /* Disable interrupts before configuring the device. */ 567 if (sc->sc_type == COM_TYPE_PXA2x0) 568 sc->sc_ier = IER_EUART; 569 else 570 sc->sc_ier = 0; 571 572 CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier); 573 574 if ((bus_space_is_equal(regsp->cr_iot, comcons_info.regs.cr_iot) && 575 regsp->cr_iobase == comcons_info.regs.cr_iobase) || force_console) { 576 comconsattached = 1; 577 578 if (force_console) 579 memcpy(regsp, &comcons_info.regs, sizeof(*regsp)); 580 581 if (cn_tab == NULL && comcnreattach() != 0) { 582 printf("can't re-init serial console @%lx\n", 583 (u_long)comcons_info.regs.cr_iobase); 584 } 585 586 switch (sc->sc_type) { 587 case COM_TYPE_16750: 588 case COM_TYPE_DW_APB: 589 /* Use in comintr(). */ 590 sc->sc_lcr = cflag2lcr(comcons_info.cflag); 591 break; 592 } 593 594 /* No need for a delay on virtual machines. */ 595 if (!skip_attach_delay) 596 delay(10000); /* wait for output to finish */ 597 598 /* Make sure the console is always "hardwired". */ 599 if (is_console) { 600 SET(sc->sc_hwflags, COM_HW_CONSOLE); 601 } 602 603 SET(sc->sc_swflags, TIOCFLAG_SOFTCAR); 604 } 605 606 /* Probe for FIFO */ 607 switch (sc->sc_type) { 608 case COM_TYPE_HAYESP: 609 goto fifodone; 610 611 case COM_TYPE_AU1x00: 612 sc->sc_fifolen = 16; 613 fifo_msg = "Au1X00 UART"; 614 SET(sc->sc_hwflags, COM_HW_FIFO); 615 goto fifodelay; 616 617 case COM_TYPE_16550_NOERS: 618 sc->sc_fifolen = 16; 619 fifo_msg = "ns16650, no ERS"; 620 SET(sc->sc_hwflags, COM_HW_FIFO); 621 goto fifodelay; 622 623 case COM_TYPE_OMAP: 624 sc->sc_fifolen = 64; 625 fifo_msg = "OMAP UART"; 626 SET(sc->sc_hwflags, COM_HW_FIFO); 627 goto fifodelay; 628 629 case COM_TYPE_INGENIC: 630 sc->sc_fifolen = 16; 631 fifo_msg = "Ingenic UART"; 632 SET(sc->sc_hwflags, COM_HW_FIFO); 633 SET(sc->sc_hwflags, COM_HW_NOIEN); 634 goto fifodelay; 635 636 case COM_TYPE_TEGRA: 637 sc->sc_fifolen = 8; 638 fifo_msg = "Tegra UART"; 639 SET(sc->sc_hwflags, COM_HW_FIFO); 640 CSR_WRITE_1(regsp, COM_REG_FIFO, 641 FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_1); 642 goto fifodelay; 643 644 case COM_TYPE_BCMAUXUART: 645 sc->sc_fifolen = 1; 646 fifo_msg = "BCM AUX UART"; 647 SET(sc->sc_hwflags, COM_HW_FIFO); 648 CSR_WRITE_1(regsp, COM_REG_FIFO, 649 FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_1); 650 goto fifodelay; 651 652 case COM_TYPE_DW_APB: 653 if (!prop_dictionary_get_uint(dict, "fifolen", &sc->sc_fifolen)) { 654 cpr = bus_space_read_4(sc->sc_regs.cr_iot, 655 sc->sc_regs.cr_ioh, DW_APB_UART_CPR); 656 sc->sc_fifolen = __SHIFTOUT(cpr, UART_CPR_FIFO_MODE) * 16; 657 } 658 if (sc->sc_fifolen == 0) { 659 sc->sc_fifolen = 1; 660 fifo_msg = "DesignWare APB UART, no fifo"; 661 CSR_WRITE_1(regsp, COM_REG_FIFO, 0); 662 } else { 663 fifo_msg = "DesignWare APB UART"; 664 SET(sc->sc_hwflags, COM_HW_FIFO); 665 CSR_WRITE_1(regsp, COM_REG_FIFO, 666 FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_1); 667 } 668 goto fifodelay; 669 } 670 671 sc->sc_fifolen = 1; 672 /* look for a NS 16550AF UART with FIFOs */ 673 if (sc->sc_type == COM_TYPE_INGENIC) { 674 CSR_WRITE_1(regsp, COM_REG_FIFO, 675 FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | 676 FIFO_TRIGGER_14 | FIFO_UART_ON); 677 } else 678 CSR_WRITE_1(regsp, COM_REG_FIFO, 679 FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_14); 680 delay(100); 681 if (ISSET(CSR_READ_1(regsp, COM_REG_IIR), IIR_FIFO_MASK) 682 == IIR_FIFO_MASK) 683 if (ISSET(CSR_READ_1(regsp, COM_REG_FIFO), FIFO_TRIGGER_14) 684 == FIFO_TRIGGER_14) { 685 SET(sc->sc_hwflags, COM_HW_FIFO); 686 687 fifo_msg = "ns16550a"; 688 sc->sc_fifolen = 16; 689 690 /* 691 * IIR changes into the EFR if LCR is set to LCR_EERS 692 * on 16650s. We also know IIR != 0 at this point. 693 * Write 0 into the EFR, and read it. If the result 694 * is 0, we have a 16650. 695 * 696 * Older 16650s were broken; the test to detect them 697 * is taken from the Linux driver. Apparently 698 * setting DLAB enable gives access to the EFR on 699 * these chips. 700 */ 701 if (sc->sc_type == COM_TYPE_16650) { 702 lcr = CSR_READ_1(regsp, COM_REG_LCR); 703 CSR_WRITE_1(regsp, COM_REG_LCR, LCR_EERS); 704 CSR_WRITE_1(regsp, COM_REG_EFR, 0); 705 if (CSR_READ_1(regsp, COM_REG_EFR) == 0) { 706 CSR_WRITE_1(regsp, COM_REG_LCR, 707 lcr | LCR_DLAB); 708 if (CSR_READ_1(regsp, COM_REG_EFR) == 0) { 709 CLR(sc->sc_hwflags, COM_HW_FIFO); 710 sc->sc_fifolen = 0; 711 } else { 712 SET(sc->sc_hwflags, COM_HW_FLOW); 713 sc->sc_fifolen = 32; 714 } 715 } else 716 sc->sc_fifolen = 16; 717 718 CSR_WRITE_1(regsp, COM_REG_LCR, lcr); 719 if (sc->sc_fifolen == 0) 720 fifo_msg = "st16650, broken fifo"; 721 else if (sc->sc_fifolen == 32) 722 fifo_msg = "st16650a"; 723 else 724 fifo_msg = "ns16550a"; 725 } 726 727 /* 728 * TL16C750 can enable 64byte FIFO, only when DLAB 729 * is 1. However, some 16750 may always enable. For 730 * example, restrictions according to DLAB in a data 731 * sheet for SC16C750 were not described. 732 * Please enable 'options COM_16650', supposing you 733 * use SC16C750. Probably 32 bytes of FIFO and HW FLOW 734 * should become effective. 735 */ 736 if (sc->sc_type == COM_TYPE_16750) { 737 uint8_t iir1, iir2; 738 uint8_t fcr = FIFO_ENABLE | FIFO_TRIGGER_14; 739 740 lcr = CSR_READ_1(regsp, COM_REG_LCR); 741 CSR_WRITE_1(regsp, COM_REG_LCR, 742 lcr & ~LCR_DLAB); 743 CSR_WRITE_1(regsp, COM_REG_FIFO, 744 fcr | FIFO_64B_ENABLE); 745 iir1 = CSR_READ_1(regsp, COM_REG_IIR); 746 CSR_WRITE_1(regsp, COM_REG_FIFO, fcr); 747 CSR_WRITE_1(regsp, COM_REG_LCR, lcr | LCR_DLAB); 748 CSR_WRITE_1(regsp, COM_REG_FIFO, 749 fcr | FIFO_64B_ENABLE); 750 iir2 = CSR_READ_1(regsp, COM_REG_IIR); 751 752 CSR_WRITE_1(regsp, COM_REG_LCR, lcr); 753 754 if (!ISSET(iir1, IIR_64B_FIFO) && 755 ISSET(iir2, IIR_64B_FIFO)) { 756 /* It is TL16C750. */ 757 sc->sc_fifolen = 64; 758 SET(sc->sc_hwflags, COM_HW_AFE); 759 } else 760 CSR_WRITE_1(regsp, COM_REG_FIFO, fcr); 761 762 if (sc->sc_fifolen == 64) 763 fifo_msg = "tl16c750"; 764 else 765 fifo_msg = "ns16750"; 766 } 767 } else 768 fifo_msg = "ns16550, broken fifo"; 769 else 770 fifo_msg = "ns8250 or ns16450, no fifo"; 771 CSR_WRITE_1(regsp, COM_REG_FIFO, 0); 772 773 fifodelay: 774 /* 775 * Some chips will clear down both Tx and Rx FIFOs when zero is 776 * written to com_fifo. If this chip is the console, writing zero 777 * results in some of the chip/FIFO description being lost, so delay 778 * printing it until now. 779 */ 780 delay(10); 781 if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) { 782 aprint_normal(": %s, %d-byte FIFO\n", fifo_msg, sc->sc_fifolen); 783 } else { 784 aprint_normal(": %s\n", fifo_msg); 785 } 786 if (ISSET(sc->sc_hwflags, COM_HW_TXFIFO_DISABLE)) { 787 sc->sc_fifolen = 1; 788 aprint_normal_dev(sc->sc_dev, "txfifo disabled\n"); 789 } 790 791 fifodone: 792 793 tp = tty_alloc(); 794 tp->t_oproc = comstart; 795 tp->t_param = comparam; 796 tp->t_hwiflow = comhwiflow; 797 tp->t_softc = sc; 798 799 sc->sc_tty = tp; 800 sc->sc_rbuf = malloc(com_rbuf_size << 1, M_DEVBUF, M_WAITOK); 801 sc->sc_rbput = sc->sc_rbget = sc->sc_rbuf; 802 sc->sc_rbavail = com_rbuf_size; 803 sc->sc_ebuf = sc->sc_rbuf + (com_rbuf_size << 1); 804 805 tty_attach(tp); 806 807 if (!ISSET(sc->sc_hwflags, COM_HW_NOIEN)) 808 SET(sc->sc_mcr, MCR_IENABLE); 809 810 if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 811 int maj; 812 813 /* locate the major number */ 814 maj = cdevsw_lookup_major(&com_cdevsw); 815 816 tp->t_dev = cn_tab->cn_dev = makedev(maj, 817 device_unit(sc->sc_dev)); 818 819 aprint_normal_dev(sc->sc_dev, "console\n"); 820 } 821 822 #ifdef KGDB 823 /* 824 * Allow kgdb to "take over" this port. If this is 825 * not the console and is the kgdb device, it has 826 * exclusive use. If it's the console _and_ the 827 * kgdb device, it doesn't. 828 */ 829 if (bus_space_is_equal(regsp->cr_iot, comkgdbregs.cr_iot) && 830 regsp->cr_iobase == comkgdbregs.cr_iobase) { 831 if (!ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 832 com_kgdb_attached = 1; 833 834 SET(sc->sc_hwflags, COM_HW_KGDB); 835 } 836 aprint_normal_dev(sc->sc_dev, "kgdb\n"); 837 } 838 #endif 839 840 sc->sc_si = softint_establish(SOFTINT_SERIAL, comsoft, sc); 841 842 #ifdef RND_COM 843 rnd_attach_source(&sc->rnd_source, device_xname(sc->sc_dev), 844 RND_TYPE_TTY, RND_FLAG_DEFAULT); 845 #endif 846 847 /* if there are no enable/disable functions, assume the device 848 is always enabled */ 849 if (!sc->enable) 850 sc->enabled = 1; 851 852 com_config(sc); 853 854 SET(sc->sc_hwflags, COM_HW_DEV_OK); 855 856 if (sc->sc_poll_ticks != 0) 857 callout_schedule(&sc->sc_poll_callout, sc->sc_poll_ticks); 858 } 859 860 void 861 com_config(struct com_softc *sc) 862 { 863 struct com_regs *regsp = &sc->sc_regs; 864 865 /* Disable interrupts before configuring the device. */ 866 if (sc->sc_type == COM_TYPE_PXA2x0) 867 sc->sc_ier = IER_EUART; 868 else 869 sc->sc_ier = 0; 870 CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier); 871 (void) CSR_READ_1(regsp, COM_REG_IIR); 872 873 /* Look for a Hayes ESP board. */ 874 if (sc->sc_type == COM_TYPE_HAYESP) { 875 876 /* Set 16550 compatibility mode */ 877 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD1, 878 HAYESP_SETMODE); 879 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2, 880 HAYESP_MODE_FIFO|HAYESP_MODE_RTS| 881 HAYESP_MODE_SCALE); 882 883 /* Set RTS/CTS flow control */ 884 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD1, 885 HAYESP_SETFLOWTYPE); 886 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2, 887 HAYESP_FLOW_RTS); 888 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2, 889 HAYESP_FLOW_CTS); 890 891 /* Set flow control levels */ 892 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD1, 893 HAYESP_SETRXFLOW); 894 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2, 895 HAYESP_HIBYTE(HAYESP_RXHIWMARK)); 896 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2, 897 HAYESP_LOBYTE(HAYESP_RXHIWMARK)); 898 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2, 899 HAYESP_HIBYTE(HAYESP_RXLOWMARK)); 900 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2, 901 HAYESP_LOBYTE(HAYESP_RXLOWMARK)); 902 } 903 904 if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE|COM_HW_KGDB)) 905 com_enable_debugport(sc); 906 } 907 908 int 909 com_detach(device_t self, int flags) 910 { 911 struct com_softc *sc = device_private(self); 912 int maj, mn; 913 914 if (ISSET(sc->sc_hwflags, COM_HW_KGDB)) 915 return EBUSY; 916 917 if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE) && 918 (flags & DETACH_SHUTDOWN) != 0) 919 return EBUSY; 920 921 if (sc->disable != NULL && sc->enabled != 0) { 922 (*sc->disable)(sc); 923 sc->enabled = 0; 924 } 925 926 if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 927 comconsattached = 0; 928 cn_tab = NULL; 929 } 930 931 /* locate the major number */ 932 maj = cdevsw_lookup_major(&com_cdevsw); 933 934 /* Nuke the vnodes for any open instances. */ 935 mn = device_unit(self); 936 vdevgone(maj, mn, mn, VCHR); 937 938 mn |= COMDIALOUT_MASK; 939 vdevgone(maj, mn, mn, VCHR); 940 941 if (sc->sc_rbuf == NULL) { 942 /* 943 * Ring buffer allocation failed in the com_attach_subr, 944 * only the tty is allocated, and nothing else. 945 */ 946 tty_free(sc->sc_tty); 947 return 0; 948 } 949 950 /* Free the receive buffer. */ 951 free(sc->sc_rbuf, M_DEVBUF); 952 953 /* Detach and free the tty. */ 954 tty_detach(sc->sc_tty); 955 tty_free(sc->sc_tty); 956 957 /* Unhook the soft interrupt handler. */ 958 softint_disestablish(sc->sc_si); 959 960 #ifdef RND_COM 961 /* Unhook the entropy source. */ 962 rnd_detach_source(&sc->rnd_source); 963 #endif 964 callout_destroy(&sc->sc_diag_callout); 965 966 /* Destroy the lock. */ 967 mutex_destroy(&sc->sc_lock); 968 969 return (0); 970 } 971 972 void 973 com_shutdown(struct com_softc *sc) 974 { 975 struct tty *tp = sc->sc_tty; 976 977 mutex_spin_enter(&sc->sc_lock); 978 979 /* If we were asserting flow control, then deassert it. */ 980 SET(sc->sc_rx_flags, RX_IBUF_BLOCKED); 981 com_hwiflow(sc); 982 983 /* Clear any break condition set with TIOCSBRK. */ 984 com_break(sc, 0); 985 986 /* 987 * Hang up if necessary. Record when we hung up, so if we 988 * immediately open the port again, we will wait a bit until 989 * the other side has had time to notice that we hung up. 990 */ 991 if (ISSET(tp->t_cflag, HUPCL)) { 992 com_modem(sc, 0); 993 microuptime(&sc->sc_hup_pending); 994 sc->sc_hup_pending.tv_sec++; 995 } 996 997 /* Turn off interrupts. */ 998 if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 999 sc->sc_ier = IER_ERLS; /* interrupt on line break */ 1000 if ((sc->sc_type == COM_TYPE_PXA2x0) || 1001 (sc->sc_type == COM_TYPE_INGENIC) || 1002 (sc->sc_type == COM_TYPE_TEGRA)) 1003 sc->sc_ier |= IER_ERXTOUT; 1004 } else 1005 sc->sc_ier = 0; 1006 1007 if (sc->sc_type == COM_TYPE_PXA2x0) 1008 sc->sc_ier |= IER_EUART; 1009 1010 CSR_WRITE_1(&sc->sc_regs, COM_REG_IER, sc->sc_ier); 1011 1012 mutex_spin_exit(&sc->sc_lock); 1013 1014 if (sc->disable) { 1015 #ifdef DIAGNOSTIC 1016 if (!sc->enabled) 1017 panic("com_shutdown: not enabled?"); 1018 #endif 1019 (*sc->disable)(sc); 1020 sc->enabled = 0; 1021 } 1022 } 1023 1024 int 1025 comopen(dev_t dev, int flag, int mode, struct lwp *l) 1026 { 1027 struct com_softc *sc; 1028 struct tty *tp; 1029 int s; 1030 int error; 1031 1032 sc = device_lookup_private(&com_cd, COMUNIT(dev)); 1033 if (sc == NULL || !ISSET(sc->sc_hwflags, COM_HW_DEV_OK) || 1034 sc->sc_rbuf == NULL) 1035 return (ENXIO); 1036 1037 if (!device_is_active(sc->sc_dev)) 1038 return (ENXIO); 1039 1040 #ifdef KGDB 1041 /* 1042 * If this is the kgdb port, no other use is permitted. 1043 */ 1044 if (ISSET(sc->sc_hwflags, COM_HW_KGDB)) 1045 return (EBUSY); 1046 #endif 1047 1048 tp = sc->sc_tty; 1049 1050 /* 1051 * If the device is exclusively for kernel use, deny userland 1052 * open. 1053 */ 1054 if (ISSET(tp->t_state, TS_KERN_ONLY)) 1055 return (EBUSY); 1056 1057 if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp)) 1058 return (EBUSY); 1059 1060 s = spltty(); 1061 1062 /* 1063 * Do the following iff this is a first open. 1064 */ 1065 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 1066 struct termios t; 1067 struct timeval now, diff; 1068 1069 tp->t_dev = dev; 1070 1071 if (sc->enable) { 1072 if ((*sc->enable)(sc)) { 1073 splx(s); 1074 aprint_error_dev(sc->sc_dev, 1075 "device enable failed\n"); 1076 return (EIO); 1077 } 1078 mutex_spin_enter(&sc->sc_lock); 1079 sc->enabled = 1; 1080 com_config(sc); 1081 } else { 1082 mutex_spin_enter(&sc->sc_lock); 1083 } 1084 1085 if (timerisset(&sc->sc_hup_pending)) { 1086 microuptime(&now); 1087 while (timercmp(&now, &sc->sc_hup_pending, <)) { 1088 timersub(&sc->sc_hup_pending, &now, &diff); 1089 const int ms = diff.tv_sec * 1000 + 1090 diff.tv_usec / 1000; 1091 kpause(ttclos, false, uimax(mstohz(ms), 1), 1092 &sc->sc_lock); 1093 microuptime(&now); 1094 } 1095 timerclear(&sc->sc_hup_pending); 1096 } 1097 1098 /* Turn on interrupts. */ 1099 sc->sc_ier = IER_ERXRDY | IER_ERLS; 1100 if (!ISSET(tp->t_cflag, CLOCAL)) 1101 sc->sc_ier |= IER_EMSC; 1102 1103 if (sc->sc_type == COM_TYPE_PXA2x0) 1104 sc->sc_ier |= IER_EUART | IER_ERXTOUT; 1105 else if (sc->sc_type == COM_TYPE_INGENIC || 1106 sc->sc_type == COM_TYPE_TEGRA) 1107 sc->sc_ier |= IER_ERXTOUT; 1108 CSR_WRITE_1(&sc->sc_regs, COM_REG_IER, sc->sc_ier); 1109 1110 /* Fetch the current modem control status, needed later. */ 1111 sc->sc_msr = CSR_READ_1(&sc->sc_regs, COM_REG_MSR); 1112 1113 /* Clear PPS capture state on first open. */ 1114 mutex_spin_enter(&timecounter_lock); 1115 memset(&sc->sc_pps_state, 0, sizeof(sc->sc_pps_state)); 1116 sc->sc_pps_state.ppscap = PPS_CAPTUREASSERT | PPS_CAPTURECLEAR; 1117 pps_init(&sc->sc_pps_state); 1118 mutex_spin_exit(&timecounter_lock); 1119 1120 mutex_spin_exit(&sc->sc_lock); 1121 1122 /* 1123 * Initialize the termios status to the defaults. Add in the 1124 * sticky bits from TIOCSFLAGS. 1125 */ 1126 if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 1127 t.c_ospeed = comcons_info.rate; 1128 t.c_cflag = comcons_info.cflag; 1129 } else { 1130 t.c_ospeed = TTYDEF_SPEED; 1131 t.c_cflag = TTYDEF_CFLAG; 1132 } 1133 t.c_ispeed = t.c_ospeed; 1134 if (ISSET(sc->sc_swflags, TIOCFLAG_CLOCAL)) 1135 SET(t.c_cflag, CLOCAL); 1136 if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS)) 1137 SET(t.c_cflag, CRTSCTS); 1138 if (ISSET(sc->sc_swflags, TIOCFLAG_MDMBUF)) 1139 SET(t.c_cflag, MDMBUF); 1140 /* Make sure comparam() will do something. */ 1141 tp->t_ospeed = 0; 1142 (void) comparam(tp, &t); 1143 tp->t_iflag = TTYDEF_IFLAG; 1144 tp->t_oflag = TTYDEF_OFLAG; 1145 tp->t_lflag = TTYDEF_LFLAG; 1146 ttychars(tp); 1147 ttsetwater(tp); 1148 1149 mutex_spin_enter(&sc->sc_lock); 1150 1151 /* 1152 * Turn on DTR. We must always do this, even if carrier is not 1153 * present, because otherwise we'd have to use TIOCSDTR 1154 * immediately after setting CLOCAL, which applications do not 1155 * expect. We always assert DTR while the device is open 1156 * unless explicitly requested to deassert it. 1157 */ 1158 com_modem(sc, 1); 1159 1160 /* Clear the input ring, and unblock. */ 1161 sc->sc_rbput = sc->sc_rbget = sc->sc_rbuf; 1162 sc->sc_rbavail = com_rbuf_size; 1163 com_iflush(sc); 1164 CLR(sc->sc_rx_flags, RX_ANY_BLOCK); 1165 com_hwiflow(sc); 1166 1167 #ifdef COM_DEBUG 1168 if (com_debug) 1169 comstatus(sc, "comopen "); 1170 #endif 1171 1172 mutex_spin_exit(&sc->sc_lock); 1173 } 1174 1175 splx(s); 1176 1177 error = ttyopen(tp, COMDIALOUT(dev), ISSET(flag, O_NONBLOCK)); 1178 if (error) 1179 goto bad; 1180 1181 error = (*tp->t_linesw->l_open)(dev, tp); 1182 if (error) 1183 goto bad; 1184 1185 return (0); 1186 1187 bad: 1188 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 1189 /* 1190 * We failed to open the device, and nobody else had it opened. 1191 * Clean up the state as appropriate. 1192 */ 1193 com_shutdown(sc); 1194 } 1195 1196 return (error); 1197 } 1198 1199 int 1200 comclose(dev_t dev, int flag, int mode, struct lwp *l) 1201 { 1202 struct com_softc *sc = 1203 device_lookup_private(&com_cd, COMUNIT(dev)); 1204 struct tty *tp = sc->sc_tty; 1205 1206 /* XXX This is for cons.c. */ 1207 if (!ISSET(tp->t_state, TS_ISOPEN)) 1208 return (0); 1209 /* 1210 * If the device is exclusively for kernel use, deny userland 1211 * close. 1212 */ 1213 if (ISSET(tp->t_state, TS_KERN_ONLY)) 1214 return (0); 1215 1216 (*tp->t_linesw->l_close)(tp, flag); 1217 ttyclose(tp); 1218 1219 if (COM_ISALIVE(sc) == 0) 1220 return (0); 1221 1222 if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) { 1223 /* 1224 * Although we got a last close, the device may still be in 1225 * use; e.g. if this was the dialout node, and there are still 1226 * processes waiting for carrier on the non-dialout node. 1227 */ 1228 com_shutdown(sc); 1229 } 1230 1231 return (0); 1232 } 1233 1234 int 1235 comread(dev_t dev, struct uio *uio, int flag) 1236 { 1237 struct com_softc *sc = 1238 device_lookup_private(&com_cd, COMUNIT(dev)); 1239 struct tty *tp = sc->sc_tty; 1240 1241 if (COM_ISALIVE(sc) == 0) 1242 return (EIO); 1243 1244 return ((*tp->t_linesw->l_read)(tp, uio, flag)); 1245 } 1246 1247 int 1248 comwrite(dev_t dev, struct uio *uio, int flag) 1249 { 1250 struct com_softc *sc = 1251 device_lookup_private(&com_cd, COMUNIT(dev)); 1252 struct tty *tp = sc->sc_tty; 1253 1254 if (COM_ISALIVE(sc) == 0) 1255 return (EIO); 1256 1257 return ((*tp->t_linesw->l_write)(tp, uio, flag)); 1258 } 1259 1260 int 1261 compoll(dev_t dev, int events, struct lwp *l) 1262 { 1263 struct com_softc *sc = 1264 device_lookup_private(&com_cd, COMUNIT(dev)); 1265 struct tty *tp = sc->sc_tty; 1266 1267 if (COM_ISALIVE(sc) == 0) 1268 return (POLLHUP); 1269 1270 return ((*tp->t_linesw->l_poll)(tp, events, l)); 1271 } 1272 1273 struct tty * 1274 comtty(dev_t dev) 1275 { 1276 struct com_softc *sc = 1277 device_lookup_private(&com_cd, COMUNIT(dev)); 1278 struct tty *tp = sc->sc_tty; 1279 1280 return (tp); 1281 } 1282 1283 int 1284 comioctl(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l) 1285 { 1286 struct com_softc *sc; 1287 struct tty *tp; 1288 int error; 1289 1290 sc = device_lookup_private(&com_cd, COMUNIT(dev)); 1291 if (sc == NULL) 1292 return ENXIO; 1293 if (COM_ISALIVE(sc) == 0) 1294 return (EIO); 1295 1296 tp = sc->sc_tty; 1297 1298 error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, l); 1299 if (error != EPASSTHROUGH) 1300 return (error); 1301 1302 error = ttioctl(tp, cmd, data, flag, l); 1303 if (error != EPASSTHROUGH) 1304 return (error); 1305 1306 error = 0; 1307 switch (cmd) { 1308 case TIOCSFLAGS: 1309 error = kauth_authorize_device_tty(l->l_cred, 1310 KAUTH_DEVICE_TTY_PRIVSET, tp); 1311 break; 1312 default: 1313 /* nothing */ 1314 break; 1315 } 1316 if (error) { 1317 return error; 1318 } 1319 1320 mutex_spin_enter(&sc->sc_lock); 1321 1322 switch (cmd) { 1323 case TIOCSBRK: 1324 com_break(sc, 1); 1325 break; 1326 1327 case TIOCCBRK: 1328 com_break(sc, 0); 1329 break; 1330 1331 case TIOCSDTR: 1332 com_modem(sc, 1); 1333 break; 1334 1335 case TIOCCDTR: 1336 com_modem(sc, 0); 1337 break; 1338 1339 case TIOCGFLAGS: 1340 *(int *)data = sc->sc_swflags; 1341 break; 1342 1343 case TIOCSFLAGS: 1344 sc->sc_swflags = *(int *)data; 1345 break; 1346 1347 case TIOCMSET: 1348 case TIOCMBIS: 1349 case TIOCMBIC: 1350 tiocm_to_com(sc, cmd, *(int *)data); 1351 break; 1352 1353 case TIOCMGET: 1354 *(int *)data = com_to_tiocm(sc); 1355 break; 1356 1357 case PPS_IOC_CREATE: 1358 case PPS_IOC_DESTROY: 1359 case PPS_IOC_GETPARAMS: 1360 case PPS_IOC_SETPARAMS: 1361 case PPS_IOC_GETCAP: 1362 case PPS_IOC_FETCH: 1363 #ifdef PPS_SYNC 1364 case PPS_IOC_KCBIND: 1365 #endif 1366 mutex_spin_enter(&timecounter_lock); 1367 error = pps_ioctl(cmd, data, &sc->sc_pps_state); 1368 mutex_spin_exit(&timecounter_lock); 1369 break; 1370 1371 case TIOCDCDTIMESTAMP: /* XXX old, overloaded API used by xntpd v3 */ 1372 mutex_spin_enter(&timecounter_lock); 1373 #ifndef PPS_TRAILING_EDGE 1374 TIMESPEC_TO_TIMEVAL((struct timeval *)data, 1375 &sc->sc_pps_state.ppsinfo.assert_timestamp); 1376 #else 1377 TIMESPEC_TO_TIMEVAL((struct timeval *)data, 1378 &sc->sc_pps_state.ppsinfo.clear_timestamp); 1379 #endif 1380 mutex_spin_exit(&timecounter_lock); 1381 break; 1382 1383 default: 1384 error = EPASSTHROUGH; 1385 break; 1386 } 1387 1388 mutex_spin_exit(&sc->sc_lock); 1389 1390 #ifdef COM_DEBUG 1391 if (com_debug) 1392 comstatus(sc, "comioctl "); 1393 #endif 1394 1395 return (error); 1396 } 1397 1398 static inline void 1399 com_schedrx(struct com_softc *sc) 1400 { 1401 1402 sc->sc_rx_ready = 1; 1403 1404 /* Wake up the poller. */ 1405 softint_schedule(sc->sc_si); 1406 } 1407 1408 void 1409 com_break(struct com_softc *sc, int onoff) 1410 { 1411 1412 if (onoff) 1413 SET(sc->sc_lcr, LCR_SBREAK); 1414 else 1415 CLR(sc->sc_lcr, LCR_SBREAK); 1416 1417 if (!sc->sc_heldchange) { 1418 if (sc->sc_tx_busy) { 1419 sc->sc_heldtbc = sc->sc_tbc; 1420 sc->sc_tbc = 0; 1421 sc->sc_heldchange = 1; 1422 } else 1423 com_loadchannelregs(sc); 1424 } 1425 } 1426 1427 void 1428 com_modem(struct com_softc *sc, int onoff) 1429 { 1430 1431 if (sc->sc_mcr_dtr == 0) 1432 return; 1433 1434 if (onoff) 1435 SET(sc->sc_mcr, sc->sc_mcr_dtr); 1436 else 1437 CLR(sc->sc_mcr, sc->sc_mcr_dtr); 1438 1439 if (!sc->sc_heldchange) { 1440 if (sc->sc_tx_busy) { 1441 sc->sc_heldtbc = sc->sc_tbc; 1442 sc->sc_tbc = 0; 1443 sc->sc_heldchange = 1; 1444 } else 1445 com_loadchannelregs(sc); 1446 } 1447 } 1448 1449 void 1450 tiocm_to_com(struct com_softc *sc, u_long how, int ttybits) 1451 { 1452 u_char combits; 1453 1454 combits = 0; 1455 if (ISSET(ttybits, TIOCM_DTR)) 1456 SET(combits, MCR_DTR); 1457 if (ISSET(ttybits, TIOCM_RTS)) 1458 SET(combits, MCR_RTS); 1459 1460 switch (how) { 1461 case TIOCMBIC: 1462 CLR(sc->sc_mcr, combits); 1463 break; 1464 1465 case TIOCMBIS: 1466 SET(sc->sc_mcr, combits); 1467 break; 1468 1469 case TIOCMSET: 1470 CLR(sc->sc_mcr, MCR_DTR | MCR_RTS); 1471 SET(sc->sc_mcr, combits); 1472 break; 1473 } 1474 1475 if (!sc->sc_heldchange) { 1476 if (sc->sc_tx_busy) { 1477 sc->sc_heldtbc = sc->sc_tbc; 1478 sc->sc_tbc = 0; 1479 sc->sc_heldchange = 1; 1480 } else 1481 com_loadchannelregs(sc); 1482 } 1483 } 1484 1485 int 1486 com_to_tiocm(struct com_softc *sc) 1487 { 1488 u_char combits; 1489 int ttybits = 0; 1490 1491 combits = sc->sc_mcr; 1492 if (ISSET(combits, MCR_DTR)) 1493 SET(ttybits, TIOCM_DTR); 1494 if (ISSET(combits, MCR_RTS)) 1495 SET(ttybits, TIOCM_RTS); 1496 1497 combits = sc->sc_msr; 1498 if (sc->sc_type == COM_TYPE_INGENIC) { 1499 SET(ttybits, TIOCM_CD); 1500 } else { 1501 if (ISSET(combits, MSR_DCD)) 1502 SET(ttybits, TIOCM_CD); 1503 } 1504 if (ISSET(combits, MSR_CTS)) 1505 SET(ttybits, TIOCM_CTS); 1506 if (ISSET(combits, MSR_DSR)) 1507 SET(ttybits, TIOCM_DSR); 1508 if (ISSET(combits, MSR_RI | MSR_TERI)) 1509 SET(ttybits, TIOCM_RI); 1510 1511 if (ISSET(sc->sc_ier, IER_ERXRDY | IER_ETXRDY | IER_ERLS | IER_EMSC)) 1512 SET(ttybits, TIOCM_LE); 1513 1514 return (ttybits); 1515 } 1516 1517 static u_char 1518 cflag2lcr(tcflag_t cflag) 1519 { 1520 u_char lcr = 0; 1521 1522 switch (ISSET(cflag, CSIZE)) { 1523 case CS5: 1524 SET(lcr, LCR_5BITS); 1525 break; 1526 case CS6: 1527 SET(lcr, LCR_6BITS); 1528 break; 1529 case CS7: 1530 SET(lcr, LCR_7BITS); 1531 break; 1532 case CS8: 1533 SET(lcr, LCR_8BITS); 1534 break; 1535 } 1536 if (ISSET(cflag, PARENB)) { 1537 SET(lcr, LCR_PENAB); 1538 if (!ISSET(cflag, PARODD)) 1539 SET(lcr, LCR_PEVEN); 1540 } 1541 if (ISSET(cflag, CSTOPB)) 1542 SET(lcr, LCR_STOPB); 1543 1544 return (lcr); 1545 } 1546 1547 int 1548 comparam(struct tty *tp, struct termios *t) 1549 { 1550 struct com_softc *sc = 1551 device_lookup_private(&com_cd, COMUNIT(tp->t_dev)); 1552 int ospeed; 1553 u_char lcr; 1554 1555 if (COM_ISALIVE(sc) == 0) 1556 return (EIO); 1557 1558 if (sc->sc_type == COM_TYPE_HAYESP) { 1559 int prescaler, speed; 1560 1561 /* 1562 * Calculate UART clock prescaler. It should be in 1563 * range of 0 .. 3. 1564 */ 1565 for (prescaler = 0, speed = t->c_ospeed; prescaler < 4; 1566 prescaler++, speed /= 2) 1567 if ((ospeed = comspeed(speed, sc->sc_frequency, 1568 sc->sc_type)) > 0) 1569 break; 1570 1571 if (prescaler == 4) 1572 return (EINVAL); 1573 sc->sc_prescaler = prescaler; 1574 } else 1575 ospeed = comspeed(t->c_ospeed, sc->sc_frequency, sc->sc_type); 1576 1577 /* Check requested parameters. */ 1578 if (ospeed < 0) 1579 return (EINVAL); 1580 if (t->c_ispeed && t->c_ispeed != t->c_ospeed) 1581 return (EINVAL); 1582 1583 /* 1584 * For the console, always force CLOCAL and !HUPCL, so that the port 1585 * is always active. 1586 */ 1587 if (ISSET(sc->sc_swflags, TIOCFLAG_SOFTCAR) || 1588 ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 1589 SET(t->c_cflag, CLOCAL); 1590 CLR(t->c_cflag, HUPCL); 1591 } 1592 1593 /* 1594 * If there were no changes, don't do anything. This avoids dropping 1595 * input and improves performance when all we did was frob things like 1596 * VMIN and VTIME. 1597 */ 1598 if (tp->t_ospeed == t->c_ospeed && 1599 tp->t_cflag == t->c_cflag) 1600 return (0); 1601 1602 lcr = ISSET(sc->sc_lcr, LCR_SBREAK) | cflag2lcr(t->c_cflag); 1603 1604 mutex_spin_enter(&sc->sc_lock); 1605 1606 sc->sc_lcr = lcr; 1607 1608 /* 1609 * If we're not in a mode that assumes a connection is present, then 1610 * ignore carrier changes. 1611 */ 1612 if (ISSET(t->c_cflag, CLOCAL | MDMBUF)) 1613 sc->sc_msr_dcd = 0; 1614 else 1615 sc->sc_msr_dcd = MSR_DCD; 1616 /* 1617 * Set the flow control pins depending on the current flow control 1618 * mode. 1619 */ 1620 if (ISSET(t->c_cflag, CRTSCTS)) { 1621 sc->sc_mcr_dtr = MCR_DTR; 1622 sc->sc_mcr_rts = MCR_RTS; 1623 sc->sc_msr_cts = MSR_CTS; 1624 if (ISSET(sc->sc_hwflags, COM_HW_AFE)) { 1625 SET(sc->sc_mcr, MCR_AFE); 1626 } else { 1627 sc->sc_efr = EFR_AUTORTS | EFR_AUTOCTS; 1628 } 1629 } else if (ISSET(t->c_cflag, MDMBUF)) { 1630 /* 1631 * For DTR/DCD flow control, make sure we don't toggle DTR for 1632 * carrier detection. 1633 */ 1634 sc->sc_mcr_dtr = 0; 1635 sc->sc_mcr_rts = MCR_DTR; 1636 sc->sc_msr_cts = MSR_DCD; 1637 if (ISSET(sc->sc_hwflags, COM_HW_AFE)) { 1638 CLR(sc->sc_mcr, MCR_AFE); 1639 } else { 1640 sc->sc_efr = 0; 1641 } 1642 } else { 1643 /* 1644 * If no flow control, then always set RTS. This will make 1645 * the other side happy if it mistakenly thinks we're doing 1646 * RTS/CTS flow control. 1647 */ 1648 sc->sc_mcr_dtr = MCR_DTR | MCR_RTS; 1649 sc->sc_mcr_rts = 0; 1650 sc->sc_msr_cts = 0; 1651 if (ISSET(sc->sc_hwflags, COM_HW_AFE)) { 1652 CLR(sc->sc_mcr, MCR_AFE); 1653 } else { 1654 sc->sc_efr = 0; 1655 } 1656 if (ISSET(sc->sc_mcr, MCR_DTR)) 1657 SET(sc->sc_mcr, MCR_RTS); 1658 else 1659 CLR(sc->sc_mcr, MCR_RTS); 1660 } 1661 sc->sc_msr_mask = sc->sc_msr_cts | sc->sc_msr_dcd; 1662 1663 if (t->c_ospeed == 0 && tp->t_ospeed != 0) 1664 CLR(sc->sc_mcr, sc->sc_mcr_dtr); 1665 else if (t->c_ospeed != 0 && tp->t_ospeed == 0) 1666 SET(sc->sc_mcr, sc->sc_mcr_dtr); 1667 1668 sc->sc_dlbl = ospeed; 1669 sc->sc_dlbh = ospeed >> 8; 1670 1671 /* 1672 * Set the FIFO threshold based on the receive speed. 1673 * 1674 * * If it's a low speed, it's probably a mouse or some other 1675 * interactive device, so set the threshold low. 1676 * * If it's a high speed, trim the trigger level down to prevent 1677 * overflows. 1678 * * Otherwise set it a bit higher. 1679 */ 1680 if (sc->sc_type == COM_TYPE_HAYESP) { 1681 sc->sc_fifo = FIFO_DMA_MODE | FIFO_ENABLE | FIFO_TRIGGER_8; 1682 } else if (sc->sc_type == COM_TYPE_TEGRA) { 1683 sc->sc_fifo = FIFO_ENABLE | FIFO_TRIGGER_1; 1684 } else if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) { 1685 if (t->c_ospeed <= 1200) 1686 sc->sc_fifo = FIFO_ENABLE | FIFO_TRIGGER_1; 1687 else if (t->c_ospeed <= 38400) 1688 sc->sc_fifo = FIFO_ENABLE | FIFO_TRIGGER_8; 1689 else 1690 sc->sc_fifo = FIFO_ENABLE | FIFO_TRIGGER_4; 1691 } else { 1692 sc->sc_fifo = 0; 1693 } 1694 1695 if (sc->sc_type == COM_TYPE_INGENIC) 1696 sc->sc_fifo |= FIFO_UART_ON; 1697 1698 /* And copy to tty. */ 1699 tp->t_ispeed = t->c_ospeed; 1700 tp->t_ospeed = t->c_ospeed; 1701 tp->t_cflag = t->c_cflag; 1702 1703 if (!sc->sc_heldchange) { 1704 if (sc->sc_tx_busy) { 1705 sc->sc_heldtbc = sc->sc_tbc; 1706 sc->sc_tbc = 0; 1707 sc->sc_heldchange = 1; 1708 } else 1709 com_loadchannelregs(sc); 1710 } 1711 1712 if (!ISSET(t->c_cflag, CHWFLOW)) { 1713 /* Disable the high water mark. */ 1714 sc->sc_r_hiwat = 0; 1715 sc->sc_r_lowat = 0; 1716 if (ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED)) { 1717 CLR(sc->sc_rx_flags, RX_TTY_OVERFLOWED); 1718 com_schedrx(sc); 1719 } 1720 if (ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED)) { 1721 CLR(sc->sc_rx_flags, RX_TTY_BLOCKED|RX_IBUF_BLOCKED); 1722 com_hwiflow(sc); 1723 } 1724 } else { 1725 sc->sc_r_hiwat = com_rbuf_hiwat; 1726 sc->sc_r_lowat = com_rbuf_lowat; 1727 } 1728 1729 mutex_spin_exit(&sc->sc_lock); 1730 1731 /* 1732 * Update the tty layer's idea of the carrier bit, in case we changed 1733 * CLOCAL or MDMBUF. We don't hang up here; we only do that by 1734 * explicit request. 1735 */ 1736 if (sc->sc_type == COM_TYPE_INGENIC) { 1737 /* no DCD here */ 1738 (void) (*tp->t_linesw->l_modem)(tp, 1); 1739 } else 1740 (void) (*tp->t_linesw->l_modem)(tp, ISSET(sc->sc_msr, MSR_DCD)); 1741 1742 #ifdef COM_DEBUG 1743 if (com_debug) 1744 comstatus(sc, "comparam "); 1745 #endif 1746 1747 if (!ISSET(t->c_cflag, CHWFLOW)) { 1748 if (sc->sc_tx_stopped) { 1749 sc->sc_tx_stopped = 0; 1750 comstart(tp); 1751 } 1752 } 1753 1754 return (0); 1755 } 1756 1757 void 1758 com_iflush(struct com_softc *sc) 1759 { 1760 struct com_regs *regsp = &sc->sc_regs; 1761 uint8_t fifo; 1762 #ifdef DIAGNOSTIC 1763 int reg; 1764 #endif 1765 int timo; 1766 1767 #ifdef DIAGNOSTIC 1768 reg = 0xffff; 1769 #endif 1770 timo = 50000; 1771 /* flush any pending I/O */ 1772 while (ISSET(CSR_READ_1(regsp, COM_REG_LSR), LSR_RXRDY) 1773 && --timo) 1774 #ifdef DIAGNOSTIC 1775 reg = 1776 #else 1777 (void) 1778 #endif 1779 CSR_READ_1(regsp, COM_REG_RXDATA); 1780 #ifdef DIAGNOSTIC 1781 if (!timo) 1782 aprint_error_dev(sc->sc_dev, "com_iflush timeout %02x\n", reg); 1783 #endif 1784 1785 switch (sc->sc_type) { 1786 case COM_TYPE_16750: 1787 case COM_TYPE_DW_APB: 1788 /* 1789 * Reset all Rx/Tx FIFO, preserve current FIFO length. 1790 * This should prevent triggering busy interrupt while 1791 * manipulating divisors. 1792 */ 1793 fifo = CSR_READ_1(regsp, COM_REG_FIFO) & (FIFO_TRIGGER_1 | 1794 FIFO_TRIGGER_4 | FIFO_TRIGGER_8 | FIFO_TRIGGER_14); 1795 CSR_WRITE_1(regsp, COM_REG_FIFO, 1796 fifo | FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST); 1797 delay(100); 1798 break; 1799 } 1800 } 1801 1802 void 1803 com_loadchannelregs(struct com_softc *sc) 1804 { 1805 struct com_regs *regsp = &sc->sc_regs; 1806 1807 /* XXXXX necessary? */ 1808 com_iflush(sc); 1809 1810 if (sc->sc_type == COM_TYPE_PXA2x0) 1811 CSR_WRITE_1(regsp, COM_REG_IER, IER_EUART); 1812 else 1813 CSR_WRITE_1(regsp, COM_REG_IER, 0); 1814 1815 if (sc->sc_type == COM_TYPE_OMAP) { 1816 /* disable before changing settings */ 1817 CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_DISABLE); 1818 } 1819 1820 if (ISSET(sc->sc_hwflags, COM_HW_FLOW)) { 1821 KASSERT(sc->sc_type != COM_TYPE_AU1x00); 1822 KASSERT(sc->sc_type != COM_TYPE_16550_NOERS); 1823 /* no EFR on alchemy */ 1824 CSR_WRITE_1(regsp, COM_REG_LCR, LCR_EERS); 1825 CSR_WRITE_1(regsp, COM_REG_EFR, sc->sc_efr); 1826 } 1827 if (sc->sc_type == COM_TYPE_AU1x00) { 1828 /* alchemy has single separate 16-bit clock divisor register */ 1829 CSR_WRITE_2(regsp, COM_REG_DLBL, sc->sc_dlbl + 1830 (sc->sc_dlbh << 8)); 1831 } else { 1832 CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr | LCR_DLAB); 1833 CSR_WRITE_1(regsp, COM_REG_DLBL, sc->sc_dlbl); 1834 CSR_WRITE_1(regsp, COM_REG_DLBH, sc->sc_dlbh); 1835 } 1836 CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr); 1837 CSR_WRITE_1(regsp, COM_REG_MCR, sc->sc_mcr_active = sc->sc_mcr); 1838 CSR_WRITE_1(regsp, COM_REG_FIFO, sc->sc_fifo); 1839 if (sc->sc_type == COM_TYPE_HAYESP) { 1840 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD1, 1841 HAYESP_SETPRESCALER); 1842 bus_space_write_1(regsp->cr_iot, sc->sc_hayespioh, HAYESP_CMD2, 1843 sc->sc_prescaler); 1844 } 1845 if (sc->sc_type == COM_TYPE_OMAP) { 1846 /* setup the fifos. the FCR value is not used as long 1847 as SCR[6] and SCR[7] are 0, which they are at reset 1848 and we never touch the SCR register */ 1849 uint8_t rx_fifo_trig = 40; 1850 uint8_t tx_fifo_trig = 60; 1851 uint8_t rx_start = 8; 1852 uint8_t rx_halt = 60; 1853 uint8_t tlr_value = ((rx_fifo_trig>>2) << 4) | (tx_fifo_trig>>2); 1854 uint8_t tcr_value = ((rx_start>>2) << 4) | (rx_halt>>2); 1855 1856 /* enable access to TCR & TLR */ 1857 CSR_WRITE_1(regsp, COM_REG_MCR, sc->sc_mcr | MCR_TCR_TLR); 1858 1859 /* write tcr and tlr values */ 1860 CSR_WRITE_1(regsp, COM_REG_TLR, tlr_value); 1861 CSR_WRITE_1(regsp, COM_REG_TCR, tcr_value); 1862 1863 /* disable access to TCR & TLR */ 1864 CSR_WRITE_1(regsp, COM_REG_MCR, sc->sc_mcr); 1865 1866 /* enable again, but mode is based on speed */ 1867 if (sc->sc_tty->t_termios.c_ospeed > 230400) { 1868 CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_UART_13X); 1869 } else { 1870 CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_UART_16X); 1871 } 1872 } 1873 1874 CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier); 1875 } 1876 1877 int 1878 comhwiflow(struct tty *tp, int block) 1879 { 1880 struct com_softc *sc = 1881 device_lookup_private(&com_cd, COMUNIT(tp->t_dev)); 1882 1883 if (COM_ISALIVE(sc) == 0) 1884 return (0); 1885 1886 if (sc->sc_mcr_rts == 0) 1887 return (0); 1888 1889 mutex_spin_enter(&sc->sc_lock); 1890 1891 if (block) { 1892 if (!ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) { 1893 SET(sc->sc_rx_flags, RX_TTY_BLOCKED); 1894 com_hwiflow(sc); 1895 } 1896 } else { 1897 if (ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED)) { 1898 CLR(sc->sc_rx_flags, RX_TTY_OVERFLOWED); 1899 com_schedrx(sc); 1900 } 1901 if (ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) { 1902 CLR(sc->sc_rx_flags, RX_TTY_BLOCKED); 1903 com_hwiflow(sc); 1904 } 1905 } 1906 1907 mutex_spin_exit(&sc->sc_lock); 1908 return (1); 1909 } 1910 1911 /* 1912 * (un)block input via hw flowcontrol 1913 */ 1914 void 1915 com_hwiflow(struct com_softc *sc) 1916 { 1917 struct com_regs *regsp= &sc->sc_regs; 1918 1919 if (sc->sc_mcr_rts == 0) 1920 return; 1921 1922 if (ISSET(sc->sc_rx_flags, RX_ANY_BLOCK)) { 1923 CLR(sc->sc_mcr, sc->sc_mcr_rts); 1924 CLR(sc->sc_mcr_active, sc->sc_mcr_rts); 1925 } else { 1926 SET(sc->sc_mcr, sc->sc_mcr_rts); 1927 SET(sc->sc_mcr_active, sc->sc_mcr_rts); 1928 } 1929 CSR_WRITE_1(regsp, COM_REG_MCR, sc->sc_mcr_active); 1930 } 1931 1932 1933 void 1934 comstart(struct tty *tp) 1935 { 1936 struct com_softc *sc = 1937 device_lookup_private(&com_cd, COMUNIT(tp->t_dev)); 1938 struct com_regs *regsp = &sc->sc_regs; 1939 1940 if (COM_ISALIVE(sc) == 0) 1941 return; 1942 1943 if (ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP)) 1944 return; 1945 if (sc->sc_tx_stopped) 1946 return; 1947 if (!ttypull(tp)) 1948 return; 1949 1950 /* Grab the first contiguous region of buffer space. */ 1951 { 1952 u_char *tba; 1953 int tbc; 1954 1955 tba = tp->t_outq.c_cf; 1956 tbc = ndqb(&tp->t_outq, 0); 1957 1958 mutex_spin_enter(&sc->sc_lock); 1959 1960 sc->sc_tba = tba; 1961 sc->sc_tbc = tbc; 1962 } 1963 1964 SET(tp->t_state, TS_BUSY); 1965 sc->sc_tx_busy = 1; 1966 1967 /* Enable transmit completion interrupts if necessary. */ 1968 if (!ISSET(sc->sc_ier, IER_ETXRDY)) { 1969 SET(sc->sc_ier, IER_ETXRDY); 1970 CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier); 1971 } 1972 1973 /* Output the first chunk of the contiguous buffer. */ 1974 if (!ISSET(sc->sc_hwflags, COM_HW_NO_TXPRELOAD)) { 1975 u_int n; 1976 1977 n = sc->sc_tbc; 1978 if (n > sc->sc_fifolen) 1979 n = sc->sc_fifolen; 1980 CSR_WRITE_MULTI(regsp, COM_REG_TXDATA, sc->sc_tba, n); 1981 sc->sc_tbc -= n; 1982 sc->sc_tba += n; 1983 } 1984 1985 mutex_spin_exit(&sc->sc_lock); 1986 } 1987 1988 /* 1989 * Stop output on a line. 1990 */ 1991 void 1992 comstop(struct tty *tp, int flag) 1993 { 1994 struct com_softc *sc = 1995 device_lookup_private(&com_cd, COMUNIT(tp->t_dev)); 1996 1997 mutex_spin_enter(&sc->sc_lock); 1998 if (ISSET(tp->t_state, TS_BUSY)) { 1999 /* Stop transmitting at the next chunk. */ 2000 sc->sc_tbc = 0; 2001 sc->sc_heldtbc = 0; 2002 if (!ISSET(tp->t_state, TS_TTSTOP)) 2003 SET(tp->t_state, TS_FLUSH); 2004 } 2005 mutex_spin_exit(&sc->sc_lock); 2006 } 2007 2008 void 2009 comdiag(void *arg) 2010 { 2011 struct com_softc *sc = arg; 2012 int overflows, floods; 2013 2014 mutex_spin_enter(&sc->sc_lock); 2015 overflows = sc->sc_overflows; 2016 sc->sc_overflows = 0; 2017 floods = sc->sc_floods; 2018 sc->sc_floods = 0; 2019 sc->sc_errors = 0; 2020 mutex_spin_exit(&sc->sc_lock); 2021 2022 log(LOG_WARNING, "%s: %d silo overflow%s, %d ibuf flood%s\n", 2023 device_xname(sc->sc_dev), 2024 overflows, overflows == 1 ? "" : "s", 2025 floods, floods == 1 ? "" : "s"); 2026 } 2027 2028 static inline void 2029 com_rxsoft(struct com_softc *sc, struct tty *tp) 2030 { 2031 int (*rint)(int, struct tty *) = tp->t_linesw->l_rint; 2032 u_char *get, *end; 2033 u_int cc, scc; 2034 u_char lsr; 2035 int code; 2036 2037 end = sc->sc_ebuf; 2038 get = sc->sc_rbget; 2039 scc = cc = com_rbuf_size - sc->sc_rbavail; 2040 2041 if (cc == com_rbuf_size) { 2042 sc->sc_floods++; 2043 if (sc->sc_errors++ == 0) 2044 callout_reset(&sc->sc_diag_callout, 60 * hz, 2045 comdiag, sc); 2046 } 2047 2048 /* If not yet open, drop the entire buffer content here */ 2049 if (!ISSET(tp->t_state, TS_ISOPEN)) { 2050 get += cc << 1; 2051 if (get >= end) 2052 get -= com_rbuf_size << 1; 2053 cc = 0; 2054 } 2055 while (cc) { 2056 code = get[0]; 2057 lsr = get[1]; 2058 if (ISSET(lsr, LSR_OE | LSR_BI | LSR_FE | LSR_PE)) { 2059 if (ISSET(lsr, LSR_OE)) { 2060 sc->sc_overflows++; 2061 if (sc->sc_errors++ == 0) 2062 callout_reset(&sc->sc_diag_callout, 2063 60 * hz, comdiag, sc); 2064 } 2065 if (ISSET(lsr, LSR_BI | LSR_FE)) 2066 SET(code, TTY_FE); 2067 if (ISSET(lsr, LSR_PE)) 2068 SET(code, TTY_PE); 2069 } 2070 if ((*rint)(code, tp) == -1) { 2071 /* 2072 * The line discipline's buffer is out of space. 2073 */ 2074 if (!ISSET(sc->sc_rx_flags, RX_TTY_BLOCKED)) { 2075 /* 2076 * We're either not using flow control, or the 2077 * line discipline didn't tell us to block for 2078 * some reason. Either way, we have no way to 2079 * know when there's more space available, so 2080 * just drop the rest of the data. 2081 */ 2082 get += cc << 1; 2083 if (get >= end) 2084 get -= com_rbuf_size << 1; 2085 cc = 0; 2086 } else { 2087 /* 2088 * Don't schedule any more receive processing 2089 * until the line discipline tells us there's 2090 * space available (through comhwiflow()). 2091 * Leave the rest of the data in the input 2092 * buffer. 2093 */ 2094 SET(sc->sc_rx_flags, RX_TTY_OVERFLOWED); 2095 } 2096 break; 2097 } 2098 get += 2; 2099 if (get >= end) 2100 get = sc->sc_rbuf; 2101 cc--; 2102 } 2103 2104 if (cc != scc) { 2105 sc->sc_rbget = get; 2106 mutex_spin_enter(&sc->sc_lock); 2107 2108 cc = sc->sc_rbavail += scc - cc; 2109 /* Buffers should be ok again, release possible block. */ 2110 if (cc >= sc->sc_r_lowat) { 2111 if (ISSET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED)) { 2112 CLR(sc->sc_rx_flags, RX_IBUF_OVERFLOWED); 2113 SET(sc->sc_ier, IER_ERXRDY); 2114 if (sc->sc_type == COM_TYPE_PXA2x0) 2115 SET(sc->sc_ier, IER_ERXTOUT); 2116 if (sc->sc_type == COM_TYPE_INGENIC || 2117 sc->sc_type == COM_TYPE_TEGRA) 2118 SET(sc->sc_ier, IER_ERXTOUT); 2119 2120 CSR_WRITE_1(&sc->sc_regs, COM_REG_IER, 2121 sc->sc_ier); 2122 } 2123 if (ISSET(sc->sc_rx_flags, RX_IBUF_BLOCKED)) { 2124 CLR(sc->sc_rx_flags, RX_IBUF_BLOCKED); 2125 com_hwiflow(sc); 2126 } 2127 } 2128 mutex_spin_exit(&sc->sc_lock); 2129 } 2130 } 2131 2132 static inline void 2133 com_txsoft(struct com_softc *sc, struct tty *tp) 2134 { 2135 2136 CLR(tp->t_state, TS_BUSY); 2137 if (ISSET(tp->t_state, TS_FLUSH)) 2138 CLR(tp->t_state, TS_FLUSH); 2139 else 2140 ndflush(&tp->t_outq, (int)(sc->sc_tba - tp->t_outq.c_cf)); 2141 (*tp->t_linesw->l_start)(tp); 2142 } 2143 2144 static inline void 2145 com_stsoft(struct com_softc *sc, struct tty *tp) 2146 { 2147 u_char msr, delta; 2148 2149 mutex_spin_enter(&sc->sc_lock); 2150 msr = sc->sc_msr; 2151 delta = sc->sc_msr_delta; 2152 sc->sc_msr_delta = 0; 2153 mutex_spin_exit(&sc->sc_lock); 2154 2155 if (ISSET(delta, sc->sc_msr_dcd)) { 2156 /* 2157 * Inform the tty layer that carrier detect changed. 2158 */ 2159 (void) (*tp->t_linesw->l_modem)(tp, ISSET(msr, MSR_DCD)); 2160 } 2161 2162 if (ISSET(delta, sc->sc_msr_cts)) { 2163 /* Block or unblock output according to flow control. */ 2164 if (ISSET(msr, sc->sc_msr_cts)) { 2165 sc->sc_tx_stopped = 0; 2166 (*tp->t_linesw->l_start)(tp); 2167 } else { 2168 sc->sc_tx_stopped = 1; 2169 } 2170 } 2171 2172 #ifdef COM_DEBUG 2173 if (com_debug) 2174 comstatus(sc, "com_stsoft"); 2175 #endif 2176 } 2177 2178 void 2179 comsoft(void *arg) 2180 { 2181 struct com_softc *sc = arg; 2182 struct tty *tp; 2183 2184 if (COM_ISALIVE(sc) == 0) 2185 return; 2186 2187 tp = sc->sc_tty; 2188 2189 if (sc->sc_rx_ready) { 2190 sc->sc_rx_ready = 0; 2191 com_rxsoft(sc, tp); 2192 } 2193 2194 if (sc->sc_st_check) { 2195 sc->sc_st_check = 0; 2196 com_stsoft(sc, tp); 2197 } 2198 2199 if (sc->sc_tx_done) { 2200 sc->sc_tx_done = 0; 2201 com_txsoft(sc, tp); 2202 } 2203 } 2204 2205 int 2206 comintr(void *arg) 2207 { 2208 struct com_softc *sc = arg; 2209 struct com_regs *regsp = &sc->sc_regs; 2210 2211 u_char *put, *end; 2212 u_int cc; 2213 u_char lsr, iir; 2214 2215 if (COM_ISALIVE(sc) == 0) 2216 return (0); 2217 2218 KASSERT(regsp != NULL); 2219 2220 mutex_spin_enter(&sc->sc_lock); 2221 iir = CSR_READ_1(regsp, COM_REG_IIR); 2222 2223 /* Handle ns16750-specific busy interrupt. */ 2224 if (sc->sc_type == COM_TYPE_16750 && 2225 (iir & IIR_BUSY) == IIR_BUSY) { 2226 for (int timeout = 10000; 2227 (CSR_READ_1(regsp, COM_REG_USR) & 0x1) != 0; timeout--) 2228 if (timeout <= 0) { 2229 aprint_error_dev(sc->sc_dev, 2230 "timeout while waiting for BUSY interrupt " 2231 "acknowledge\n"); 2232 mutex_spin_exit(&sc->sc_lock); 2233 return (0); 2234 } 2235 2236 CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr); 2237 iir = CSR_READ_1(regsp, COM_REG_IIR); 2238 } 2239 2240 /* DesignWare APB UART BUSY interrupt */ 2241 if (sc->sc_type == COM_TYPE_DW_APB && 2242 (iir & IIR_BUSY) == IIR_BUSY) { 2243 if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) { 2244 (void)CSR_READ_1(regsp, COM_REG_USR); 2245 } else if ((CSR_READ_1(regsp, COM_REG_USR) & 0x1) != 0) { 2246 CSR_WRITE_1(regsp, COM_REG_HALT, HALT_CHCFG_EN); 2247 CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr | LCR_DLAB); 2248 CSR_WRITE_1(regsp, COM_REG_DLBL, sc->sc_dlbl); 2249 CSR_WRITE_1(regsp, COM_REG_DLBH, sc->sc_dlbh); 2250 CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr); 2251 CSR_WRITE_1(regsp, COM_REG_HALT, 2252 HALT_CHCFG_EN | HALT_CHCFG_UD); 2253 for (int timeout = 10000000; 2254 (CSR_READ_1(regsp, COM_REG_HALT) & HALT_CHCFG_UD) != 0; 2255 timeout--) { 2256 if (timeout <= 0) { 2257 aprint_error_dev(sc->sc_dev, 2258 "timeout while waiting for HALT " 2259 "update acknowledge 0x%x 0x%x\n", 2260 CSR_READ_1(regsp, COM_REG_HALT), 2261 CSR_READ_1(regsp, COM_REG_USR)); 2262 break; 2263 } 2264 } 2265 CSR_WRITE_1(regsp, COM_REG_HALT, 0); 2266 (void)CSR_READ_1(regsp, COM_REG_USR); 2267 } else { 2268 CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr | LCR_DLAB); 2269 CSR_WRITE_1(regsp, COM_REG_DLBL, sc->sc_dlbl); 2270 CSR_WRITE_1(regsp, COM_REG_DLBH, sc->sc_dlbh); 2271 CSR_WRITE_1(regsp, COM_REG_LCR, sc->sc_lcr); 2272 } 2273 } 2274 2275 end = sc->sc_ebuf; 2276 put = sc->sc_rbput; 2277 cc = sc->sc_rbavail; 2278 2279 if (ISSET(iir, IIR_NOPEND)) { 2280 if (ISSET(sc->sc_hwflags, COM_HW_BROKEN_ETXRDY)) 2281 goto do_tx; 2282 mutex_spin_exit(&sc->sc_lock); 2283 return (0); 2284 } 2285 2286 again: do { 2287 u_char msr, delta; 2288 2289 lsr = CSR_READ_1(regsp, COM_REG_LSR); 2290 if (ISSET(lsr, LSR_BI)) { 2291 int cn_trapped = 0; /* see above: cn_trap() */ 2292 2293 cn_check_magic(sc->sc_tty->t_dev, 2294 CNC_BREAK, com_cnm_state); 2295 if (cn_trapped) 2296 continue; 2297 #if defined(KGDB) && !defined(DDB) 2298 if (ISSET(sc->sc_hwflags, COM_HW_KGDB)) { 2299 kgdb_connect(1); 2300 continue; 2301 } 2302 #endif 2303 } 2304 2305 if (sc->sc_type == COM_TYPE_BCMAUXUART && ISSET(iir, IIR_RXRDY)) 2306 lsr |= LSR_RXRDY; 2307 2308 if (ISSET(lsr, LSR_RCV_MASK) && 2309 !ISSET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED)) { 2310 while (cc > 0) { 2311 int cn_trapped = 0; 2312 put[0] = CSR_READ_1(regsp, COM_REG_RXDATA); 2313 put[1] = lsr; 2314 cn_check_magic(sc->sc_tty->t_dev, 2315 put[0], com_cnm_state); 2316 if (cn_trapped) 2317 goto next; 2318 put += 2; 2319 if (put >= end) 2320 put = sc->sc_rbuf; 2321 cc--; 2322 next: 2323 lsr = CSR_READ_1(regsp, COM_REG_LSR); 2324 if (!ISSET(lsr, LSR_RCV_MASK)) 2325 break; 2326 } 2327 2328 /* 2329 * Current string of incoming characters ended because 2330 * no more data was available or we ran out of space. 2331 * Schedule a receive event if any data was received. 2332 * If we're out of space, turn off receive interrupts. 2333 */ 2334 sc->sc_rbput = put; 2335 sc->sc_rbavail = cc; 2336 if (!ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED)) 2337 sc->sc_rx_ready = 1; 2338 2339 /* 2340 * See if we are in danger of overflowing a buffer. If 2341 * so, use hardware flow control to ease the pressure. 2342 */ 2343 if (!ISSET(sc->sc_rx_flags, RX_IBUF_BLOCKED) && 2344 cc < sc->sc_r_hiwat) { 2345 SET(sc->sc_rx_flags, RX_IBUF_BLOCKED); 2346 com_hwiflow(sc); 2347 } 2348 2349 /* 2350 * If we're out of space, disable receive interrupts 2351 * until the queue has drained a bit. 2352 */ 2353 if (!cc) { 2354 SET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED); 2355 switch (sc->sc_type) { 2356 case COM_TYPE_PXA2x0: 2357 CLR(sc->sc_ier, IER_ERXRDY|IER_ERXTOUT); 2358 break; 2359 case COM_TYPE_INGENIC: 2360 case COM_TYPE_TEGRA: 2361 CLR(sc->sc_ier, 2362 IER_ERXRDY | IER_ERXTOUT); 2363 break; 2364 default: 2365 CLR(sc->sc_ier, IER_ERXRDY); 2366 break; 2367 } 2368 CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier); 2369 } 2370 } else { 2371 if ((iir & (IIR_RXRDY|IIR_TXRDY)) == IIR_RXRDY) { 2372 (void) CSR_READ_1(regsp, COM_REG_RXDATA); 2373 continue; 2374 } 2375 } 2376 2377 msr = CSR_READ_1(regsp, COM_REG_MSR); 2378 delta = msr ^ sc->sc_msr; 2379 sc->sc_msr = msr; 2380 if ((sc->sc_pps_state.ppsparam.mode & PPS_CAPTUREBOTH) && 2381 (delta & MSR_DCD)) { 2382 mutex_spin_enter(&timecounter_lock); 2383 pps_capture(&sc->sc_pps_state); 2384 pps_event(&sc->sc_pps_state, 2385 (msr & MSR_DCD) ? 2386 PPS_CAPTUREASSERT : 2387 PPS_CAPTURECLEAR); 2388 mutex_spin_exit(&timecounter_lock); 2389 } 2390 2391 /* 2392 * Process normal status changes 2393 */ 2394 if (ISSET(delta, sc->sc_msr_mask)) { 2395 SET(sc->sc_msr_delta, delta); 2396 2397 /* 2398 * Stop output immediately if we lose the output 2399 * flow control signal or carrier detect. 2400 */ 2401 if (ISSET(~msr, sc->sc_msr_mask)) { 2402 sc->sc_tbc = 0; 2403 sc->sc_heldtbc = 0; 2404 #ifdef COM_DEBUG 2405 if (com_debug) 2406 comstatus(sc, "comintr "); 2407 #endif 2408 } 2409 2410 sc->sc_st_check = 1; 2411 } 2412 } while (!ISSET((iir = 2413 CSR_READ_1(regsp, COM_REG_IIR)), IIR_NOPEND) && 2414 /* 2415 * Since some device (e.g., ST16C1550) doesn't clear IIR_TXRDY 2416 * by IIR read, so we can't do this way: `process all interrupts, 2417 * then do TX if possible'. 2418 */ 2419 (iir & IIR_IMASK) != IIR_TXRDY); 2420 2421 do_tx: 2422 /* 2423 * Read LSR again, since there may be an interrupt between 2424 * the last LSR read and IIR read above. 2425 */ 2426 lsr = CSR_READ_1(regsp, COM_REG_LSR); 2427 2428 /* 2429 * See if data can be transmitted as well. 2430 * Schedule tx done event if no data left 2431 * and tty was marked busy. 2432 */ 2433 if (ISSET(lsr, LSR_TXRDY)) { 2434 /* 2435 * If we've delayed a parameter change, do it now, and restart 2436 * output. 2437 */ 2438 if (sc->sc_heldchange) { 2439 com_loadchannelregs(sc); 2440 sc->sc_heldchange = 0; 2441 sc->sc_tbc = sc->sc_heldtbc; 2442 sc->sc_heldtbc = 0; 2443 } 2444 2445 /* Output the next chunk of the contiguous buffer, if any. */ 2446 if (sc->sc_tbc > 0) { 2447 u_int n; 2448 2449 n = sc->sc_tbc; 2450 if (n > sc->sc_fifolen) 2451 n = sc->sc_fifolen; 2452 CSR_WRITE_MULTI(regsp, COM_REG_TXDATA, sc->sc_tba, n); 2453 sc->sc_tbc -= n; 2454 sc->sc_tba += n; 2455 } else { 2456 /* Disable transmit completion interrupts if necessary. */ 2457 if (ISSET(sc->sc_ier, IER_ETXRDY)) { 2458 CLR(sc->sc_ier, IER_ETXRDY); 2459 CSR_WRITE_1(regsp, COM_REG_IER, sc->sc_ier); 2460 } 2461 if (sc->sc_tx_busy) { 2462 sc->sc_tx_busy = 0; 2463 sc->sc_tx_done = 1; 2464 } 2465 } 2466 } 2467 2468 if (!ISSET((iir = CSR_READ_1(regsp, COM_REG_IIR)), IIR_NOPEND)) 2469 goto again; 2470 2471 mutex_spin_exit(&sc->sc_lock); 2472 2473 /* Wake up the poller. */ 2474 if ((sc->sc_rx_ready | sc->sc_st_check | sc->sc_tx_done) != 0) 2475 softint_schedule(sc->sc_si); 2476 2477 #ifdef RND_COM 2478 rnd_add_uint32(&sc->rnd_source, iir | lsr); 2479 #endif 2480 2481 return (1); 2482 } 2483 2484 /* 2485 * The following functions are polled getc and putc routines, shared 2486 * by the console and kgdb glue. 2487 * 2488 * The read-ahead code is so that you can detect pending in-band 2489 * cn_magic in polled mode while doing output rather than having to 2490 * wait until the kernel decides it needs input. 2491 */ 2492 2493 #define MAX_READAHEAD 20 2494 static int com_readahead[MAX_READAHEAD]; 2495 static int com_readaheadcount = 0; 2496 2497 int 2498 com_common_getc(dev_t dev, struct com_regs *regsp) 2499 { 2500 int s = splserial(); 2501 u_char stat, c; 2502 2503 /* got a character from reading things earlier */ 2504 if (com_readaheadcount > 0) { 2505 int i; 2506 2507 c = com_readahead[0]; 2508 for (i = 1; i < com_readaheadcount; i++) { 2509 com_readahead[i-1] = com_readahead[i]; 2510 } 2511 com_readaheadcount--; 2512 splx(s); 2513 return (c); 2514 } 2515 2516 /* don't block until a character becomes available */ 2517 if (!ISSET(stat = CSR_READ_1(regsp, COM_REG_LSR), LSR_RXRDY)) { 2518 splx(s); 2519 return -1; 2520 } 2521 2522 c = CSR_READ_1(regsp, COM_REG_RXDATA); 2523 stat = CSR_READ_1(regsp, COM_REG_IIR); 2524 { 2525 int cn_trapped = 0; /* required by cn_trap, see above */ 2526 if (!db_active) 2527 cn_check_magic(dev, c, com_cnm_state); 2528 } 2529 splx(s); 2530 return (c); 2531 } 2532 2533 static void 2534 com_common_putc(dev_t dev, struct com_regs *regsp, int c, int with_readahead) 2535 { 2536 int s = splserial(); 2537 int cin, stat, timo; 2538 2539 if (with_readahead && com_readaheadcount < MAX_READAHEAD 2540 && ISSET(stat = CSR_READ_1(regsp, COM_REG_LSR), LSR_RXRDY)) { 2541 int cn_trapped = 0; 2542 cin = CSR_READ_1(regsp, COM_REG_RXDATA); 2543 stat = CSR_READ_1(regsp, COM_REG_IIR); 2544 cn_check_magic(dev, cin, com_cnm_state); 2545 com_readahead[com_readaheadcount++] = cin; 2546 } 2547 2548 /* wait for any pending transmission to finish */ 2549 timo = 150000; 2550 while (!ISSET(CSR_READ_1(regsp, COM_REG_LSR), LSR_TXRDY) && --timo) 2551 continue; 2552 2553 CSR_WRITE_1(regsp, COM_REG_TXDATA, c); 2554 COM_BARRIER(regsp, BR | BW); 2555 2556 splx(s); 2557 } 2558 2559 /* 2560 * Initialize UART for use as console or KGDB line. 2561 */ 2562 int 2563 cominit(struct com_regs *regsp, int rate, int frequency, int type, 2564 tcflag_t cflag) 2565 { 2566 2567 if (bus_space_map(regsp->cr_iot, regsp->cr_iobase, regsp->cr_nports, 0, 2568 ®sp->cr_ioh)) 2569 return (ENOMEM); /* ??? */ 2570 2571 if (type == COM_TYPE_OMAP) { 2572 /* disable before changing settings */ 2573 CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_DISABLE); 2574 } 2575 2576 rate = comspeed(rate, frequency, type); 2577 if (rate != -1) { 2578 if (type == COM_TYPE_AU1x00) { 2579 /* no EFR on alchemy */ 2580 CSR_WRITE_2(regsp, COM_REG_DLBL, rate); 2581 } else { 2582 if ((type != COM_TYPE_16550_NOERS) && 2583 (type != COM_TYPE_INGENIC)) { 2584 CSR_WRITE_1(regsp, COM_REG_LCR, LCR_EERS); 2585 CSR_WRITE_1(regsp, COM_REG_EFR, 0); 2586 } 2587 CSR_WRITE_1(regsp, COM_REG_LCR, LCR_DLAB); 2588 CSR_WRITE_1(regsp, COM_REG_DLBL, rate & 0xff); 2589 CSR_WRITE_1(regsp, COM_REG_DLBH, rate >> 8); 2590 } 2591 } 2592 CSR_WRITE_1(regsp, COM_REG_LCR, cflag2lcr(cflag)); 2593 CSR_WRITE_1(regsp, COM_REG_MCR, MCR_DTR | MCR_RTS); 2594 2595 if (type == COM_TYPE_INGENIC) { 2596 CSR_WRITE_1(regsp, COM_REG_FIFO, 2597 FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | 2598 FIFO_TRIGGER_1 | FIFO_UART_ON); 2599 } else { 2600 CSR_WRITE_1(regsp, COM_REG_FIFO, 2601 FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | 2602 FIFO_TRIGGER_1); 2603 } 2604 2605 if (type == COM_TYPE_OMAP) { 2606 /* setup the fifos. the FCR value is not used as long 2607 as SCR[6] and SCR[7] are 0, which they are at reset 2608 and we never touch the SCR register */ 2609 uint8_t rx_fifo_trig = 40; 2610 uint8_t tx_fifo_trig = 60; 2611 uint8_t rx_start = 8; 2612 uint8_t rx_halt = 60; 2613 uint8_t tlr_value = ((rx_fifo_trig>>2) << 4) | (tx_fifo_trig>>2); 2614 uint8_t tcr_value = ((rx_start>>2) << 4) | (rx_halt>>2); 2615 2616 /* enable access to TCR & TLR */ 2617 CSR_WRITE_1(regsp, COM_REG_MCR, MCR_DTR | MCR_RTS | MCR_TCR_TLR); 2618 2619 /* write tcr and tlr values */ 2620 CSR_WRITE_1(regsp, COM_REG_TLR, tlr_value); 2621 CSR_WRITE_1(regsp, COM_REG_TCR, tcr_value); 2622 2623 /* disable access to TCR & TLR */ 2624 CSR_WRITE_1(regsp, COM_REG_MCR, MCR_DTR | MCR_RTS); 2625 2626 /* enable again, but mode is based on speed */ 2627 if (rate > 230400) { 2628 CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_UART_13X); 2629 } else { 2630 CSR_WRITE_1(regsp, COM_REG_MDR1, MDR1_MODE_UART_16X); 2631 } 2632 } 2633 2634 if (type == COM_TYPE_PXA2x0) 2635 CSR_WRITE_1(regsp, COM_REG_IER, IER_EUART); 2636 else 2637 CSR_WRITE_1(regsp, COM_REG_IER, 0); 2638 2639 return (0); 2640 } 2641 2642 int 2643 comcnattach1(struct com_regs *regsp, int rate, int frequency, int type, 2644 tcflag_t cflag) 2645 { 2646 int res; 2647 2648 comcons_info.regs = *regsp; 2649 2650 res = cominit(&comcons_info.regs, rate, frequency, type, cflag); 2651 if (res) 2652 return (res); 2653 2654 cn_tab = &comcons; 2655 cn_init_magic(&com_cnm_state); 2656 cn_set_magic("\047\001"); /* default magic is BREAK */ 2657 2658 comcons_info.frequency = frequency; 2659 comcons_info.type = type; 2660 comcons_info.rate = rate; 2661 comcons_info.cflag = cflag; 2662 2663 return (0); 2664 } 2665 2666 int 2667 comcnattach(bus_space_tag_t iot, bus_addr_t iobase, int rate, int frequency, 2668 int type, tcflag_t cflag) 2669 { 2670 struct com_regs regs; 2671 2672 /*XXX*/ 2673 bus_space_handle_t dummy_bsh; 2674 memset(&dummy_bsh, 0, sizeof(dummy_bsh)); 2675 2676 /* 2677 * dummy_bsh required because com_init_regs() wants it. A 2678 * real bus_space_handle will be filled in by cominit() later. 2679 * XXXJRT Detangle this mess eventually, plz. 2680 */ 2681 com_init_regs(®s, iot, dummy_bsh/*XXX*/, iobase); 2682 2683 return comcnattach1(®s, rate, frequency, type, cflag); 2684 } 2685 2686 static int 2687 comcnreattach(void) 2688 { 2689 return comcnattach1(&comcons_info.regs, comcons_info.rate, 2690 comcons_info.frequency, comcons_info.type, comcons_info.cflag); 2691 } 2692 2693 int 2694 comcngetc(dev_t dev) 2695 { 2696 2697 return (com_common_getc(dev, &comcons_info.regs)); 2698 } 2699 2700 /* 2701 * Console kernel output character routine. 2702 */ 2703 void 2704 comcnputc(dev_t dev, int c) 2705 { 2706 2707 com_common_putc(dev, &comcons_info.regs, c, cold); 2708 } 2709 2710 void 2711 comcnpollc(dev_t dev, int on) 2712 { 2713 2714 com_readaheadcount = 0; 2715 } 2716 2717 #ifdef KGDB 2718 int 2719 com_kgdb_attach1(struct com_regs *regsp, int rate, int frequency, int type, 2720 tcflag_t cflag) 2721 { 2722 int res; 2723 2724 if (bus_space_is_equal(regsp->cr_iot, comcons_info.regs.cr_iot) && 2725 regsp->cr_iobase == comcons_info.regs.cr_iobase) { 2726 #if !defined(DDB) 2727 return (EBUSY); /* cannot share with console */ 2728 #else 2729 comkgdbregs = *regsp; 2730 comkgdbregs.cr_ioh = comcons_info.regs.cr_ioh; 2731 #endif 2732 } else { 2733 comkgdbregs = *regsp; 2734 res = cominit(&comkgdbregs, rate, frequency, type, cflag); 2735 if (res) 2736 return (res); 2737 2738 /* 2739 * XXXfvdl this shouldn't be needed, but the cn_magic goo 2740 * expects this to be initialized 2741 */ 2742 cn_init_magic(&com_cnm_state); 2743 cn_set_magic("\047\001"); 2744 } 2745 2746 kgdb_attach(com_kgdb_getc, com_kgdb_putc, NULL); 2747 kgdb_dev = 123; /* unneeded, only to satisfy some tests */ 2748 2749 return (0); 2750 } 2751 2752 int 2753 com_kgdb_attach(bus_space_tag_t iot, bus_addr_t iobase, int rate, 2754 int frequency, int type, tcflag_t cflag) 2755 { 2756 struct com_regs regs; 2757 2758 com_init_regs(®s, iot, (bus_space_handle_t)0/*XXX*/, iobase); 2759 2760 return com_kgdb_attach1(®s, rate, frequency, type, cflag); 2761 } 2762 2763 /* ARGSUSED */ 2764 int 2765 com_kgdb_getc(void *arg) 2766 { 2767 2768 return (com_common_getc(NODEV, &comkgdbregs)); 2769 } 2770 2771 /* ARGSUSED */ 2772 void 2773 com_kgdb_putc(void *arg, int c) 2774 { 2775 2776 com_common_putc(NODEV, &comkgdbregs, c, 0); 2777 } 2778 #endif /* KGDB */ 2779 2780 /* 2781 * helper function to identify the com ports used by 2782 * console or KGDB (and not yet autoconf attached) 2783 */ 2784 int 2785 com_is_console(bus_space_tag_t iot, bus_addr_t iobase, bus_space_handle_t *ioh) 2786 { 2787 bus_space_handle_t help; 2788 2789 if (!comconsattached && 2790 bus_space_is_equal(iot, comcons_info.regs.cr_iot) && 2791 iobase == comcons_info.regs.cr_iobase) 2792 help = comcons_info.regs.cr_ioh; 2793 #ifdef KGDB 2794 else if (!com_kgdb_attached && 2795 bus_space_is_equal(iot, comkgdbregs.cr_iot) && 2796 iobase == comkgdbregs.cr_iobase) 2797 help = comkgdbregs.cr_ioh; 2798 #endif 2799 else 2800 return (0); 2801 2802 if (ioh) 2803 *ioh = help; 2804 return (1); 2805 } 2806 2807 /* 2808 * this routine exists to serve as a shutdown hook for systems that 2809 * have firmware which doesn't interact properly with a com device in 2810 * FIFO mode. 2811 */ 2812 bool 2813 com_cleanup(device_t self, int how) 2814 { 2815 struct com_softc *sc = device_private(self); 2816 2817 if (ISSET(sc->sc_hwflags, COM_HW_FIFO)) 2818 CSR_WRITE_1(&sc->sc_regs, COM_REG_FIFO, 0); 2819 2820 return true; 2821 } 2822 2823 bool 2824 com_suspend(device_t self, const pmf_qual_t *qual) 2825 { 2826 struct com_softc *sc = device_private(self); 2827 2828 CSR_WRITE_1(&sc->sc_regs, COM_REG_IER, 0); 2829 (void)CSR_READ_1(&sc->sc_regs, COM_REG_IIR); 2830 2831 return true; 2832 } 2833 2834 bool 2835 com_resume(device_t self, const pmf_qual_t *qual) 2836 { 2837 struct com_softc *sc = device_private(self); 2838 2839 mutex_spin_enter(&sc->sc_lock); 2840 com_loadchannelregs(sc); 2841 mutex_spin_exit(&sc->sc_lock); 2842 2843 return true; 2844 } 2845
Indexes created Sat Sep 20 22:09:52 GMT 2025