1 /* $NetBSD: state.c,v 1.35 2024/10/29 13:10:10 kre Exp $ */ 2 3 /* 4 * Copyright (c) 1989, 1993 5 * The Regents of the University of California. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. Neither the name of the University nor the names of its contributors 16 * may be used to endorse or promote products derived from this software 17 * without specific prior written permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 */ 31 32 #include <sys/cdefs.h> 33 #ifndef lint 34 #if 0 35 static char sccsid[] = "@(#)state.c 8.5 (Berkeley) 5/30/95"; 36 #else 37 __RCSID("$NetBSD: state.c,v 1.35 2024/10/29 13:10:10 kre Exp $"); 38 #endif 39 #endif /* not lint */ 40 41 #include <ctype.h> 42 #include <stdarg.h> 43 44 #include "telnetd.h" 45 46 static int envvarok(char *); 47 48 int not42 = 1; 49 50 /* 51 * Buffer for sub-options, and macros 52 * for suboptions buffer manipulations 53 */ 54 unsigned char subbuffer[4096], *subpointer= subbuffer, *subend= subbuffer; 55 56 #define SB_CLEAR() subpointer = subbuffer 57 #define SB_TERM() { subend = subpointer; SB_CLEAR(); } 58 #define SB_ACCUM(c) if (subpointer < (subbuffer+sizeof subbuffer)) { \ 59 *subpointer++ = (c); \ 60 } 61 #define SB_GET() ((*subpointer++)&0xff) 62 #define SB_EOF() (subpointer >= subend) 63 #define SB_LEN() (subend - subpointer) 64 65 #ifdef ENV_HACK 66 unsigned char *subsave; 67 #define SB_SAVE() subsave = subpointer; 68 #define SB_RESTORE() subpointer = subsave; 69 #endif 70 71 72 /* 73 * State for recv fsm 74 */ 75 #define TS_DATA 0 /* base state */ 76 #define TS_IAC 1 /* look for double IAC's */ 77 #define TS_CR 2 /* CR-LF ->'s CR */ 78 #define TS_SB 3 /* throw away begin's... */ 79 #define TS_SE 4 /* ...end's (suboption negotiation) */ 80 #define TS_WILL 5 /* will option negotiation */ 81 #define TS_WONT 6 /* wont " */ 82 #define TS_DO 7 /* do " */ 83 #define TS_DONT 8 /* dont " */ 84 85 void 86 telrcv(void) 87 { 88 int c; 89 static int state = TS_DATA; 90 91 while (ncc > 0) { 92 if ((&ptyobuf[BUFSIZ] - pfrontp) < 2) 93 break; 94 c = *netip++ & 0377, ncc--; 95 #ifdef ENCRYPTION 96 if (decrypt_input) 97 c = (*decrypt_input)(c); 98 #endif /* ENCRYPTION */ 99 switch (state) { 100 101 case TS_CR: 102 state = TS_DATA; 103 104 #ifdef LINEMODE 105 /* 106 * If we are operating in linemode, 107 * convert to local end-of-line. 108 */ 109 if (linemode && (ncc > 0) && ((c == '\n') || 110 ((c == 0) && tty_iscrnl())) ) 111 c = '\n'; 112 else 113 #endif 114 { 115 /* 116 * We now map \r\n ==> \r for pragmatic reasons. 117 * Many client implementations send \r\n when 118 * the user hits the CarriageReturn key. 119 * 120 * We USED to map \r\n ==> \n, since \r\n says 121 * that we want to be in column 1 of the next 122 * printable line, and \n is the standard 123 * unix way of saying that (\r is only good 124 * if CRMOD is set, which it normally is). 125 */ 126 127 /* Strip off \n or \0 after a \r */ 128 if ((c == 0) || (c == '\n')) 129 break; 130 } 131 /* FALL THROUGH */ 132 133 case TS_DATA: 134 if (c == IAC) { 135 state = TS_IAC; 136 break; 137 } 138 139 if ((c == '\r') && his_state_is_wont(TELOPT_BINARY)) 140 state = TS_CR; 141 142 *pfrontp++ = c; 143 break; 144 145 case TS_IAC: 146 gotiac: switch (c) { 147 148 /* 149 * Send the process on the pty side an 150 * interrupt. Do this with a NULL or 151 * interrupt char; depending on the tty mode. 152 */ 153 case IP: 154 DIAG(TD_OPTIONS, 155 printoption("td: recv IAC", c)); 156 interrupt(); 157 break; 158 159 case BREAK: 160 DIAG(TD_OPTIONS, 161 printoption("td: recv IAC", c)); 162 sendbrk(); 163 break; 164 165 /* 166 * Are You There? 167 */ 168 case AYT: 169 DIAG(TD_OPTIONS, 170 printoption("td: recv IAC", c)); 171 recv_ayt(); 172 break; 173 174 /* 175 * Abort Output 176 */ 177 case AO: 178 { 179 DIAG(TD_OPTIONS, 180 printoption("td: recv IAC", c)); 181 ptyflush(); /* half-hearted */ 182 init_termbuf(); 183 184 if (slctab[SLC_AO].sptr && 185 *slctab[SLC_AO].sptr != (cc_t)(_POSIX_VDISABLE)) { 186 *pfrontp++ = 187 (unsigned char)*slctab[SLC_AO].sptr; 188 } 189 190 netclear(); /* clear buffer back */ 191 output_data("%c%c", IAC, DM); 192 neturg = nfrontp - 1; /* off by one XXX */ 193 DIAG(TD_OPTIONS, 194 printoption("td: send IAC", DM)); 195 break; 196 } 197 198 /* 199 * Erase Character and 200 * Erase Line 201 */ 202 case EC: 203 case EL: 204 { 205 cc_t ch; 206 207 DIAG(TD_OPTIONS, 208 printoption("td: recv IAC", c)); 209 ptyflush(); /* half-hearted */ 210 init_termbuf(); 211 if (c == EC) 212 ch = *slctab[SLC_EC].sptr; 213 else 214 ch = *slctab[SLC_EL].sptr; 215 if (ch != (cc_t)(_POSIX_VDISABLE)) 216 *pfrontp++ = (unsigned char)ch; 217 break; 218 } 219 220 /* 221 * Check for urgent data... 222 */ 223 case DM: 224 DIAG(TD_OPTIONS, 225 printoption("td: recv IAC", c)); 226 SYNCHing = stilloob(net); 227 settimer(gotDM); 228 break; 229 230 231 /* 232 * Begin option subnegotiation... 233 */ 234 case SB: 235 state = TS_SB; 236 SB_CLEAR(); 237 continue; 238 239 case WILL: 240 state = TS_WILL; 241 continue; 242 243 case WONT: 244 state = TS_WONT; 245 continue; 246 247 case DO: 248 state = TS_DO; 249 continue; 250 251 case DONT: 252 state = TS_DONT; 253 continue; 254 case EOR: 255 if (his_state_is_will(TELOPT_EOR)) 256 doeof(); 257 break; 258 259 /* 260 * Handle RFC 10xx Telnet linemode option additions 261 * to command stream (EOF, SUSP, ABORT). 262 */ 263 case xEOF: 264 doeof(); 265 break; 266 267 case SUSP: 268 sendsusp(); 269 break; 270 271 case ABORT: 272 sendbrk(); 273 break; 274 275 case IAC: 276 *pfrontp++ = c; 277 break; 278 } 279 state = TS_DATA; 280 break; 281 282 case TS_SB: 283 if (c == IAC) { 284 state = TS_SE; 285 } else { 286 SB_ACCUM(c); 287 } 288 break; 289 290 case TS_SE: 291 if (c != SE) { 292 if (c != IAC) { 293 /* 294 * bad form of suboption negotiation. 295 * handle it in such a way as to avoid 296 * damage to local state. Parse 297 * suboption buffer found so far, 298 * then treat remaining stream as 299 * another command sequence. 300 */ 301 302 /* for DIAGNOSTICS */ 303 SB_ACCUM(IAC); 304 SB_ACCUM(c); 305 subpointer -= 2; 306 307 SB_TERM(); 308 suboption(); 309 state = TS_IAC; 310 goto gotiac; 311 } 312 SB_ACCUM(c); 313 state = TS_SB; 314 } else { 315 /* for DIAGNOSTICS */ 316 SB_ACCUM(IAC); 317 SB_ACCUM(SE); 318 subpointer -= 2; 319 320 SB_TERM(); 321 suboption(); /* handle sub-option */ 322 state = TS_DATA; 323 } 324 break; 325 326 case TS_WILL: 327 willoption(c); 328 state = TS_DATA; 329 continue; 330 331 case TS_WONT: 332 wontoption(c); 333 state = TS_DATA; 334 continue; 335 336 case TS_DO: 337 dooption(c); 338 state = TS_DATA; 339 continue; 340 341 case TS_DONT: 342 dontoption(c); 343 state = TS_DATA; 344 continue; 345 346 default: 347 syslog(LOG_ERR, "panic state=%d", state); 348 printf("telnetd: panic state=%d\n", state); 349 exit(1); 350 } 351 } 352 } /* end of telrcv */ 353 354 /* 355 * The will/wont/do/dont state machines are based on Dave Borman's 356 * Telnet option processing state machine. 357 * 358 * These correspond to the following states: 359 * my_state = the last negotiated state 360 * want_state = what I want the state to go to 361 * want_resp = how many requests I have sent 362 * All state defaults are negative, and resp defaults to 0. 363 * 364 * When initiating a request to change state to new_state: 365 * 366 * if ((want_resp == 0 && new_state == my_state) || want_state == new_state) { 367 * do nothing; 368 * } else { 369 * want_state = new_state; 370 * send new_state; 371 * want_resp++; 372 * } 373 * 374 * When receiving new_state: 375 * 376 * if (want_resp) { 377 * want_resp--; 378 * if (want_resp && (new_state == my_state)) 379 * want_resp--; 380 * } 381 * if ((want_resp == 0) && (new_state != want_state)) { 382 * if (ok_to_switch_to new_state) 383 * want_state = new_state; 384 * else 385 * want_resp++; 386 * send want_state; 387 * } 388 * my_state = new_state; 389 * 390 * Note that new_state is implied in these functions by the function itself. 391 * will and do imply positive new_state, wont and dont imply negative. 392 * 393 * Finally, there is one catch. If we send a negative response to a 394 * positive request, my_state will be the positive while want_state will 395 * remain negative. my_state will revert to negative when the negative 396 * acknowledgment arrives from the peer. Thus, my_state generally tells 397 * us not only the last negotiated state, but also tells us what the peer 398 * wants to be doing as well. It is important to understand this difference 399 * as we may wish to be processing data streams based on our desired state 400 * (want_state) or based on what the peer thinks the state is (my_state). 401 * 402 * This all works fine because if the peer sends a positive request, the data 403 * that we receive prior to negative acknowledgment will probably be affected 404 * by the positive state, and we can process it as such (if we can; if we 405 * can't then it really doesn't matter). If it is that important, then the 406 * peer probably should be buffering until this option state negotiation 407 * is complete. 408 * 409 */ 410 void 411 send_do(int option, int init) 412 { 413 if (init) { 414 if ((do_dont_resp[option] == 0 && his_state_is_will(option)) || 415 his_want_state_is_will(option)) 416 return; 417 /* 418 * Special case for TELOPT_TM: We send a DO, but pretend 419 * that we sent a DONT, so that we can send more DOs if 420 * we want to. 421 */ 422 if (option == TELOPT_TM) 423 set_his_want_state_wont(option); 424 else 425 set_his_want_state_will(option); 426 do_dont_resp[option]++; 427 } 428 (void) output_data("%c%c%c", IAC, DO, option); 429 430 DIAG(TD_OPTIONS, printoption("td: send do", option)); 431 } 432 433 #ifdef LINEMODE 434 extern void doclientstat(void); 435 #endif 436 #if 0 437 #ifdef AUTHENTICATION 438 extern void auth_request(void); /* libtelnet */ 439 #endif 440 #ifdef ENCRYPTION 441 extern void encrypt_send_support(void); 442 #endif /* ENCRYPTION */ 443 #endif 444 445 void 446 willoption(int option) 447 { 448 int changeok = 0; 449 void (*func)(void) = 0; 450 451 /* 452 * process input from peer. 453 */ 454 455 DIAG(TD_OPTIONS, printoption("td: recv will", option)); 456 457 if (do_dont_resp[option]) { 458 do_dont_resp[option]--; 459 if (do_dont_resp[option] && his_state_is_will(option)) 460 do_dont_resp[option]--; 461 } 462 if (do_dont_resp[option] == 0) { 463 if (his_want_state_is_wont(option)) { 464 switch (option) { 465 466 case TELOPT_BINARY: 467 init_termbuf(); 468 tty_binaryin(1); 469 set_termbuf(); 470 changeok++; 471 break; 472 473 case TELOPT_ECHO: 474 /* 475 * See comments below for more info. 476 */ 477 not42 = 0; /* looks like a 4.2 system */ 478 break; 479 480 case TELOPT_TM: 481 #if defined(LINEMODE) && defined(KLUDGELINEMODE) 482 /* 483 * This telnetd implementation does not really 484 * support timing marks, it just uses them to 485 * support the kludge linemode stuff. If we 486 * receive a will or wont TM in response to our 487 * do TM request that may have been sent to 488 * determine kludge linemode support, process 489 * it, otherwise TM should get a negative 490 * response back. 491 */ 492 /* 493 * Handle the linemode kludge stuff. 494 * If we are not currently supporting any 495 * linemode at all, then we assume that this 496 * is the client telling us to use kludge 497 * linemode in response to our query. Set the 498 * linemode type that is to be supported, note 499 * that the client wishes to use linemode, and 500 * eat the will TM as though it never arrived. 501 */ 502 if (lmodetype < KLUDGE_LINEMODE) { 503 lmodetype = KLUDGE_LINEMODE; 504 clientstat(TELOPT_LINEMODE, WILL, 0); 505 send_wont(TELOPT_SGA, 1); 506 } else if (lmodetype == NO_AUTOKLUDGE) { 507 lmodetype = KLUDGE_OK; 508 } 509 #endif /* defined(LINEMODE) && defined(KLUDGELINEMODE) */ 510 /* 511 * We never respond to a WILL TM, and 512 * we leave the state WONT. 513 */ 514 return; 515 516 case TELOPT_LFLOW: 517 /* 518 * If we are going to support flow control 519 * option, then don't worry peer that we can't 520 * change the flow control characters. 521 */ 522 slctab[SLC_XON].defset.flag &= ~SLC_LEVELBITS; 523 slctab[SLC_XON].defset.flag |= SLC_DEFAULT; 524 slctab[SLC_XOFF].defset.flag &= ~SLC_LEVELBITS; 525 slctab[SLC_XOFF].defset.flag |= SLC_DEFAULT; 526 /* FALLTHROUGH */ 527 case TELOPT_TTYPE: 528 case TELOPT_SGA: 529 case TELOPT_NAWS: 530 case TELOPT_TSPEED: 531 case TELOPT_XDISPLOC: 532 case TELOPT_NEW_ENVIRON: 533 case TELOPT_OLD_ENVIRON: 534 changeok++; 535 break; 536 537 #ifdef LINEMODE 538 case TELOPT_LINEMODE: 539 # ifdef KLUDGELINEMODE 540 /* 541 * Note client's desire to use linemode. 542 */ 543 lmodetype = REAL_LINEMODE; 544 # endif /* KLUDGELINEMODE */ 545 func = doclientstat; 546 changeok++; 547 break; 548 #endif /* LINEMODE */ 549 550 #ifdef AUTHENTICATION 551 case TELOPT_AUTHENTICATION: 552 if (auth_level >= 0) { 553 func = auth_request; 554 changeok++; 555 } 556 break; 557 #endif 558 559 #ifdef ENCRYPTION 560 case TELOPT_ENCRYPT: 561 func = encrypt_send_support; 562 changeok++; 563 break; 564 #endif /* ENCRYPTION */ 565 566 default: 567 break; 568 } 569 if (changeok) { 570 set_his_want_state_will(option); 571 send_do(option, 0); 572 } else { 573 do_dont_resp[option]++; 574 send_dont(option, 0); 575 } 576 } else { 577 /* 578 * Option processing that should happen when 579 * we receive conformation of a change in 580 * state that we had requested. 581 */ 582 switch (option) { 583 case TELOPT_ECHO: 584 not42 = 0; /* looks like a 4.2 system */ 585 /* 586 * Egads, he responded "WILL ECHO". Turn 587 * it off right now! 588 */ 589 send_dont(option, 1); 590 /* 591 * "WILL ECHO". Kludge upon kludge! 592 * A 4.2 client is now echoing user input at 593 * the tty. This is probably undesireable and 594 * it should be stopped. The client will 595 * respond WONT TM to the DO TM that we send to 596 * check for kludge linemode. When the WONT TM 597 * arrives, linemode will be turned off and a 598 * change propagated to the pty. This change 599 * will cause us to process the new pty state 600 * in localstat(), which will notice that 601 * linemode is off and send a WILL ECHO 602 * so that we are properly in character mode and 603 * all is well. 604 */ 605 break; 606 #ifdef LINEMODE 607 case TELOPT_LINEMODE: 608 # ifdef KLUDGELINEMODE 609 /* 610 * Note client's desire to use linemode. 611 */ 612 lmodetype = REAL_LINEMODE; 613 # endif /* KLUDGELINEMODE */ 614 func = doclientstat; 615 break; 616 #endif /* LINEMODE */ 617 618 #ifdef AUTHENTICATION 619 case TELOPT_AUTHENTICATION: 620 func = auth_request; 621 break; 622 #endif 623 624 #ifdef ENCRYPTION 625 case TELOPT_ENCRYPT: 626 func = encrypt_send_support; 627 break; 628 #endif /* ENCRYPTION */ 629 630 case TELOPT_LFLOW: 631 func = flowstat; 632 break; 633 } 634 } 635 } 636 set_his_state_will(option); 637 if (func) 638 (*func)(); 639 } /* end of willoption */ 640 641 void 642 send_dont(int option, int init) 643 { 644 if (init) { 645 if ((do_dont_resp[option] == 0 && his_state_is_wont(option)) || 646 his_want_state_is_wont(option)) 647 return; 648 set_his_want_state_wont(option); 649 do_dont_resp[option]++; 650 } 651 (void) output_data("%c%c%c", IAC, DONT, option); 652 653 DIAG(TD_OPTIONS, printoption("td: send dont", option)); 654 } 655 656 void 657 wontoption(int option) 658 { 659 /* 660 * Process client input. 661 */ 662 663 DIAG(TD_OPTIONS, printoption("td: recv wont", option)); 664 665 if (do_dont_resp[option]) { 666 do_dont_resp[option]--; 667 if (do_dont_resp[option] && his_state_is_wont(option)) 668 do_dont_resp[option]--; 669 } 670 if (do_dont_resp[option] == 0) { 671 if (his_want_state_is_will(option)) { 672 /* it is always ok to change to negative state */ 673 switch (option) { 674 case TELOPT_ECHO: 675 not42 = 1; /* doesn't seem to be a 4.2 system */ 676 break; 677 678 case TELOPT_BINARY: 679 init_termbuf(); 680 tty_binaryin(0); 681 set_termbuf(); 682 break; 683 684 #ifdef LINEMODE 685 case TELOPT_LINEMODE: 686 # ifdef KLUDGELINEMODE 687 /* 688 * If real linemode is supported, then client is 689 * asking to turn linemode off. 690 */ 691 if (lmodetype != REAL_LINEMODE) 692 break; 693 /* XXX double-check this --thorpej */ 694 lmodetype = KLUDGE_LINEMODE; 695 # endif /* KLUDGELINEMODE */ 696 clientstat(TELOPT_LINEMODE, WONT, 0); 697 break; 698 #endif /* LINEMODE */ 699 700 case TELOPT_TM: 701 /* 702 * If we get a WONT TM, and had sent a DO TM, 703 * don't respond with a DONT TM, just leave it 704 * as is. Short circut the state machine to 705 * achieve this. 706 */ 707 set_his_want_state_wont(TELOPT_TM); 708 return; 709 710 case TELOPT_LFLOW: 711 /* 712 * If we are not going to support flow control 713 * option, then let peer know that we can't 714 * change the flow control characters. 715 */ 716 slctab[SLC_XON].defset.flag &= ~SLC_LEVELBITS; 717 slctab[SLC_XON].defset.flag |= SLC_CANTCHANGE; 718 slctab[SLC_XOFF].defset.flag &= ~SLC_LEVELBITS; 719 slctab[SLC_XOFF].defset.flag |= SLC_CANTCHANGE; 720 break; 721 722 #ifdef AUTHENTICATION 723 case TELOPT_AUTHENTICATION: 724 auth_finished(0, AUTH_REJECT); 725 break; 726 #endif 727 728 /* 729 * For options that we might spin waiting for 730 * sub-negotiation, if the client turns off the 731 * option rather than responding to the request, 732 * we have to treat it here as if we got a response 733 * to the sub-negotiation, (by updating the timers) 734 * so that we'll break out of the loop. 735 */ 736 case TELOPT_TTYPE: 737 settimer(ttypesubopt); 738 break; 739 740 case TELOPT_TSPEED: 741 settimer(tspeedsubopt); 742 break; 743 744 case TELOPT_XDISPLOC: 745 settimer(xdisplocsubopt); 746 break; 747 748 case TELOPT_OLD_ENVIRON: 749 settimer(oenvironsubopt); 750 break; 751 752 case TELOPT_NEW_ENVIRON: 753 settimer(environsubopt); 754 break; 755 756 default: 757 break; 758 } 759 set_his_want_state_wont(option); 760 if (his_state_is_will(option)) 761 send_dont(option, 0); 762 } else { 763 switch (option) { 764 case TELOPT_TM: 765 #if defined(LINEMODE) && defined(KLUDGELINEMODE) 766 if (lmodetype < NO_AUTOKLUDGE) { 767 lmodetype = NO_LINEMODE; 768 clientstat(TELOPT_LINEMODE, WONT, 0); 769 send_will(TELOPT_SGA, 1); 770 send_will(TELOPT_ECHO, 1); 771 } 772 #endif /* defined(LINEMODE) && defined(KLUDGELINEMODE) */ 773 break; 774 775 #ifdef AUTHENTICATION 776 case TELOPT_AUTHENTICATION: 777 auth_finished(0, AUTH_REJECT); 778 break; 779 #endif 780 default: 781 break; 782 } 783 } 784 } 785 set_his_state_wont(option); 786 787 } /* end of wontoption */ 788 789 void 790 send_will(int option, int init) 791 { 792 if (init) { 793 if ((will_wont_resp[option] == 0 && my_state_is_will(option))|| 794 my_want_state_is_will(option)) 795 return; 796 set_my_want_state_will(option); 797 will_wont_resp[option]++; 798 } 799 (void) output_data("%c%c%c", IAC, WILL, option); 800 801 DIAG(TD_OPTIONS, printoption("td: send will", option)); 802 } 803 804 #if !defined(LINEMODE) || !defined(KLUDGELINEMODE) 805 /* 806 * When we get a DONT SGA, we will try once to turn it 807 * back on. If the other side responds DONT SGA, we 808 * leave it at that. This is so that when we talk to 809 * clients that understand KLUDGELINEMODE but not LINEMODE, 810 * we'll keep them in char-at-a-time mode. 811 */ 812 int turn_on_sga = 0; 813 #endif 814 815 void 816 dooption(int option) 817 { 818 int changeok = 0; 819 820 /* 821 * Process client input. 822 */ 823 824 DIAG(TD_OPTIONS, printoption("td: recv do", option)); 825 826 if (will_wont_resp[option]) { 827 will_wont_resp[option]--; 828 if (will_wont_resp[option] && my_state_is_will(option)) 829 will_wont_resp[option]--; 830 } 831 if ((will_wont_resp[option] == 0) && (my_want_state_is_wont(option))) { 832 switch (option) { 833 case TELOPT_ECHO: 834 #ifdef LINEMODE 835 # ifdef KLUDGELINEMODE 836 if (lmodetype == NO_LINEMODE) 837 # else 838 if (his_state_is_wont(TELOPT_LINEMODE)) 839 # endif 840 #endif 841 { 842 init_termbuf(); 843 tty_setecho(1); 844 set_termbuf(); 845 } 846 changeok++; 847 break; 848 849 case TELOPT_BINARY: 850 init_termbuf(); 851 tty_binaryout(1); 852 set_termbuf(); 853 changeok++; 854 break; 855 856 case TELOPT_SGA: 857 #if defined(LINEMODE) && defined(KLUDGELINEMODE) 858 /* 859 * If kludge linemode is in use, then we must 860 * process an incoming do SGA for linemode 861 * purposes. 862 */ 863 if (lmodetype == KLUDGE_LINEMODE) { 864 /* 865 * Receipt of "do SGA" in kludge 866 * linemode is the peer asking us to 867 * turn off linemode. Make note of 868 * the request. 869 */ 870 clientstat(TELOPT_LINEMODE, WONT, 0); 871 /* 872 * If linemode did not get turned off 873 * then don't tell peer that we did. 874 * Breaking here forces a wont SGA to 875 * be returned. 876 */ 877 if (linemode) 878 break; 879 } 880 #else 881 turn_on_sga = 0; 882 #endif /* defined(LINEMODE) && defined(KLUDGELINEMODE) */ 883 changeok++; 884 break; 885 886 case TELOPT_STATUS: 887 changeok++; 888 break; 889 890 case TELOPT_TM: 891 /* 892 * Special case for TM. We send a WILL, but 893 * pretend we sent a WONT. 894 */ 895 send_will(option, 0); 896 set_my_want_state_wont(option); 897 set_my_state_wont(option); 898 return; 899 900 case TELOPT_LOGOUT: 901 /* 902 * When we get a LOGOUT option, respond 903 * with a WILL LOGOUT, make sure that 904 * it gets written out to the network, 905 * and then just go away... 906 */ 907 set_my_want_state_will(TELOPT_LOGOUT); 908 send_will(TELOPT_LOGOUT, 0); 909 set_my_state_will(TELOPT_LOGOUT); 910 (void)netflush(); 911 cleanup(0); 912 /* NOT REACHED */ 913 break; 914 915 #ifdef ENCRYPTION 916 case TELOPT_ENCRYPT: 917 changeok++; 918 break; 919 #endif /* ENCRYPTION */ 920 921 case TELOPT_LINEMODE: 922 case TELOPT_TTYPE: 923 case TELOPT_NAWS: 924 case TELOPT_TSPEED: 925 case TELOPT_LFLOW: 926 case TELOPT_XDISPLOC: 927 case TELOPT_OLD_ENVIRON: 928 default: 929 break; 930 } 931 if (changeok) { 932 set_my_want_state_will(option); 933 send_will(option, 0); 934 } else { 935 will_wont_resp[option]++; 936 send_wont(option, 0); 937 } 938 } 939 set_my_state_will(option); 940 941 } /* end of dooption */ 942 943 void 944 send_wont(int option, int init) 945 { 946 if (init) { 947 if ((will_wont_resp[option] == 0 && my_state_is_wont(option)) || 948 my_want_state_is_wont(option)) 949 return; 950 set_my_want_state_wont(option); 951 will_wont_resp[option]++; 952 } 953 (void) output_data("%c%c%c", IAC, WONT, option); 954 955 DIAG(TD_OPTIONS, printoption("td: send wont", option)); 956 } 957 958 void 959 dontoption(int option) 960 { 961 /* 962 * Process client input. 963 */ 964 965 966 DIAG(TD_OPTIONS, printoption("td: recv dont", option)); 967 968 if (will_wont_resp[option]) { 969 will_wont_resp[option]--; 970 if (will_wont_resp[option] && my_state_is_wont(option)) 971 will_wont_resp[option]--; 972 } 973 if ((will_wont_resp[option] == 0) && (my_want_state_is_will(option))) { 974 switch (option) { 975 case TELOPT_BINARY: 976 init_termbuf(); 977 tty_binaryout(0); 978 set_termbuf(); 979 break; 980 981 case TELOPT_ECHO: /* we should stop echoing */ 982 #ifdef LINEMODE 983 # ifdef KLUDGELINEMODE 984 if ((lmodetype != REAL_LINEMODE) && 985 (lmodetype != KLUDGE_LINEMODE)) 986 # else 987 if (his_state_is_wont(TELOPT_LINEMODE)) 988 # endif 989 #endif 990 { 991 init_termbuf(); 992 tty_setecho(0); 993 set_termbuf(); 994 } 995 break; 996 997 case TELOPT_SGA: 998 #if defined(LINEMODE) && defined(KLUDGELINEMODE) 999 /* 1000 * If kludge linemode is in use, then we 1001 * must process an incoming do SGA for 1002 * linemode purposes. 1003 */ 1004 if ((lmodetype == KLUDGE_LINEMODE) || 1005 (lmodetype == KLUDGE_OK)) { 1006 /* 1007 * The client is asking us to turn 1008 * linemode on. 1009 */ 1010 lmodetype = KLUDGE_LINEMODE; 1011 clientstat(TELOPT_LINEMODE, WILL, 0); 1012 /* 1013 * If we did not turn line mode on, 1014 * then what do we say? Will SGA? 1015 * This violates design of telnet. 1016 * Gross. Very Gross. 1017 */ 1018 } 1019 break; 1020 #else 1021 set_my_want_state_wont(option); 1022 if (my_state_is_will(option)) 1023 send_wont(option, 0); 1024 set_my_state_wont(option); 1025 if (turn_on_sga ^= 1) 1026 send_will(option, 1); 1027 return; 1028 #endif /* defined(LINEMODE) && defined(KLUDGELINEMODE) */ 1029 1030 default: 1031 break; 1032 } 1033 1034 set_my_want_state_wont(option); 1035 if (my_state_is_will(option)) 1036 send_wont(option, 0); 1037 } 1038 set_my_state_wont(option); 1039 1040 } /* end of dontoption */ 1041 1042 #ifdef ENV_HACK 1043 int env_ovar = -1; 1044 int env_ovalue = -1; 1045 #else /* ENV_HACK */ 1046 # define env_ovar OLD_ENV_VAR 1047 # define env_ovalue OLD_ENV_VALUE 1048 #endif /* ENV_HACK */ 1049 1050 /* envvarok(char*) */ 1051 /* check that variable is safe to pass to login or shell */ 1052 static int 1053 envvarok(char *varp) 1054 { 1055 1056 if (strcmp(varp, "TERMCAP") && /* to prevent a security hole */ 1057 strcmp(varp, "TERMINFO") && /* with tgetent */ 1058 strcmp(varp, "TERMPATH") && 1059 strcmp(varp, "HOME") && /* to prevent the tegetent bug */ 1060 strncmp(varp, "LD_", strlen("LD_")) && /* most systems */ 1061 strncmp(varp, "_RLD_", strlen("_RLD_")) && /* IRIX */ 1062 strcmp(varp, "LIBPATH") && /* AIX */ 1063 strcmp(varp, "ENV") && 1064 strcmp(varp, "BASH_ENV") && 1065 strcmp(varp, "IFS") && 1066 strncmp(varp, "KRB5", strlen("KRB5")) && /* Krb5 */ 1067 /* 1068 * The above case is a catch-all for now. Here are some of 1069 * the specific ones we must avoid passing, at least until 1070 * we can prove it can be done safely. Keep this list 1071 * around un case someone wants to remove the catch-all. 1072 */ 1073 strcmp(varp, "KRB5_CONFIG") && /* Krb5 */ 1074 strcmp(varp, "KRB5CCNAME") && /* Krb5 */ 1075 strcmp(varp, "KRB5_KTNAME") && /* Krb5 */ 1076 strcmp(varp, "KRBTKFILE") && /* Krb4 */ 1077 strcmp(varp, "KRB_CONF") && /* CNS 4 */ 1078 strcmp(varp, "KRB_REALMS") && /* CNS 4 */ 1079 strcmp(varp, "RESOLV_HOST_CONF")) /* Linux */ 1080 return (1); 1081 else { 1082 syslog(LOG_INFO, "Rejected the attempt to modify the " 1083 "environment variable \"%s\"", varp); 1084 return (0); 1085 } 1086 } 1087 1088 /* 1089 * suboption() 1090 * 1091 * Look at the sub-option buffer, and try to be helpful to the other 1092 * side. 1093 * 1094 * Currently we recognize: 1095 * 1096 * Terminal type is 1097 * Linemode 1098 * Window size 1099 * Terminal speed 1100 */ 1101 void 1102 suboption(void) 1103 { 1104 int subchar; 1105 1106 DIAG(TD_OPTIONS, {netflush(); printsub('<', subpointer, SB_LEN()+2);}); 1107 1108 subchar = SB_GET(); 1109 switch (subchar) { 1110 case TELOPT_TSPEED: { 1111 int xspeed, rspeed; 1112 1113 if (his_state_is_wont(TELOPT_TSPEED)) /* Ignore if option disabled */ 1114 break; 1115 1116 settimer(tspeedsubopt); 1117 1118 if (SB_EOF() || SB_GET() != TELQUAL_IS) 1119 return; 1120 1121 xspeed = atoi((char *)subpointer); 1122 1123 while (SB_GET() != ',' && !SB_EOF()); 1124 if (SB_EOF()) 1125 return; 1126 1127 rspeed = atoi((char *)subpointer); 1128 clientstat(TELOPT_TSPEED, xspeed, rspeed); 1129 1130 break; 1131 1132 } /* end of case TELOPT_TSPEED */ 1133 1134 case TELOPT_TTYPE: { /* Yaaaay! */ 1135 char *p; 1136 1137 if (his_state_is_wont(TELOPT_TTYPE)) /* Ignore if option disabled */ 1138 break; 1139 settimer(ttypesubopt); 1140 1141 if (SB_EOF() || SB_GET() != TELQUAL_IS) { 1142 return; /* ??? XXX but, this is the most robust */ 1143 } 1144 1145 p = terminaltype; 1146 1147 while ((p < (terminaltype + sizeof terminaltype-1)) && 1148 !SB_EOF()) { 1149 int c; 1150 1151 c = SB_GET(); 1152 if (isupper(c)) { 1153 c = tolower(c); 1154 } 1155 *p++ = c; /* accumulate name */ 1156 } 1157 *p = 0; 1158 break; 1159 } /* end of case TELOPT_TTYPE */ 1160 1161 case TELOPT_NAWS: { 1162 int xwinsize, ywinsize; 1163 1164 if (his_state_is_wont(TELOPT_NAWS)) /* Ignore if option disabled */ 1165 break; 1166 1167 if (SB_EOF()) 1168 return; 1169 xwinsize = SB_GET() << 8; 1170 if (SB_EOF()) 1171 return; 1172 xwinsize |= SB_GET(); 1173 if (SB_EOF()) 1174 return; 1175 ywinsize = SB_GET() << 8; 1176 if (SB_EOF()) 1177 return; 1178 ywinsize |= SB_GET(); 1179 clientstat(TELOPT_NAWS, xwinsize, ywinsize); 1180 1181 break; 1182 1183 } /* end of case TELOPT_NAWS */ 1184 1185 #ifdef LINEMODE 1186 case TELOPT_LINEMODE: { 1187 int request; 1188 1189 if (his_state_is_wont(TELOPT_LINEMODE)) /* Ignore if option disabled */ 1190 break; 1191 /* 1192 * Process linemode suboptions. 1193 */ 1194 if (SB_EOF()) 1195 break; /* garbage was sent */ 1196 request = SB_GET(); /* get will/wont */ 1197 1198 if (SB_EOF()) 1199 break; /* another garbage check */ 1200 1201 if (request == LM_SLC) { /* SLC is not preceded by WILL or WONT */ 1202 /* 1203 * Process suboption buffer of slc's 1204 */ 1205 start_slc(1); 1206 do_opt_slc(subpointer, SB_LEN()); 1207 (void) end_slc(0); 1208 break; 1209 } else if (request == LM_MODE) { 1210 if (SB_EOF()) 1211 return; 1212 useeditmode = SB_GET(); /* get mode flag */ 1213 clientstat(LM_MODE, 0, 0); 1214 break; 1215 } 1216 1217 if (SB_EOF()) 1218 break; 1219 switch (SB_GET()) { /* what suboption? */ 1220 case LM_FORWARDMASK: 1221 /* 1222 * According to spec, only server can send request for 1223 * forwardmask, and client can only return a positive response. 1224 * So don't worry about it. 1225 */ 1226 1227 default: 1228 break; 1229 } 1230 break; 1231 } /* end of case TELOPT_LINEMODE */ 1232 #endif 1233 case TELOPT_STATUS: { 1234 int mode; 1235 1236 if (SB_EOF()) 1237 break; 1238 mode = SB_GET(); 1239 switch (mode) { 1240 case TELQUAL_SEND: 1241 if (my_state_is_will(TELOPT_STATUS)) 1242 send_status(); 1243 break; 1244 1245 case TELQUAL_IS: 1246 break; 1247 1248 default: 1249 break; 1250 } 1251 break; 1252 } /* end of case TELOPT_STATUS */ 1253 1254 case TELOPT_XDISPLOC: { 1255 if (SB_EOF() || SB_GET() != TELQUAL_IS) 1256 return; 1257 settimer(xdisplocsubopt); 1258 subpointer[SB_LEN()] = '\0'; 1259 (void)setenv("DISPLAY", (char *)subpointer, 1); 1260 break; 1261 } /* end of case TELOPT_XDISPLOC */ 1262 1263 case TELOPT_NEW_ENVIRON: 1264 case TELOPT_OLD_ENVIRON: { 1265 int c; 1266 char *cp, *varp, *valp; 1267 1268 if (SB_EOF()) 1269 return; 1270 c = SB_GET(); 1271 if (c == TELQUAL_IS) { 1272 if (subchar == TELOPT_OLD_ENVIRON) 1273 settimer(oenvironsubopt); 1274 else 1275 settimer(environsubopt); 1276 } else if (c != TELQUAL_INFO) { 1277 return; 1278 } 1279 1280 if (subchar == TELOPT_NEW_ENVIRON) { 1281 while (!SB_EOF()) { 1282 c = SB_GET(); 1283 if ((c == NEW_ENV_VAR) || (c == ENV_USERVAR)) 1284 break; 1285 } 1286 } else 1287 { 1288 #ifdef ENV_HACK 1289 /* 1290 * We only want to do this if we haven't already decided 1291 * whether or not the other side has its VALUE and VAR 1292 * reversed. 1293 */ 1294 if (env_ovar < 0) { 1295 int last = -1; /* invalid value */ 1296 int empty = 0; 1297 int got_var = 0, got_value = 0, got_uservar = 0; 1298 1299 /* 1300 * The other side might have its VALUE and VAR values 1301 * reversed. To be interoperable, we need to determine 1302 * which way it is. If the first recognized character 1303 * is a VAR or VALUE, then that will tell us what 1304 * type of client it is. If the first recognized 1305 * character is a USERVAR, then we continue scanning 1306 * the suboption looking for two consecutive 1307 * VAR or VALUE fields. We should not get two 1308 * consecutive VALUE fields, so finding two 1309 * consecutive VALUE or VAR fields will tell us 1310 * what the client is. 1311 */ 1312 SB_SAVE(); 1313 while (!SB_EOF()) { 1314 c = SB_GET(); 1315 switch(c) { 1316 case OLD_ENV_VAR: 1317 if (last < 0 || last == OLD_ENV_VAR 1318 || (empty && (last == OLD_ENV_VALUE))) 1319 goto env_ovar_ok; 1320 got_var++; 1321 last = OLD_ENV_VAR; 1322 break; 1323 case OLD_ENV_VALUE: 1324 if (last < 0 || last == OLD_ENV_VALUE 1325 || (empty && (last == OLD_ENV_VAR))) 1326 goto env_ovar_wrong; 1327 got_value++; 1328 last = OLD_ENV_VALUE; 1329 break; 1330 case ENV_USERVAR: 1331 /* count strings of USERVAR as one */ 1332 if (last != ENV_USERVAR) 1333 got_uservar++; 1334 if (empty) { 1335 if (last == OLD_ENV_VALUE) 1336 goto env_ovar_ok; 1337 if (last == OLD_ENV_VAR) 1338 goto env_ovar_wrong; 1339 } 1340 last = ENV_USERVAR; 1341 break; 1342 case ENV_ESC: 1343 if (!SB_EOF()) 1344 c = SB_GET(); 1345 /* FALL THROUGH */ 1346 default: 1347 empty = 0; 1348 continue; 1349 } 1350 empty = 1; 1351 } 1352 if (empty) { 1353 if (last == OLD_ENV_VALUE) 1354 goto env_ovar_ok; 1355 if (last == OLD_ENV_VAR) 1356 goto env_ovar_wrong; 1357 } 1358 /* 1359 * Ok, the first thing was a USERVAR, and there 1360 * are not two consecutive VAR or VALUE commands, 1361 * and none of the VAR or VALUE commands are empty. 1362 * If the client has sent us a well-formed option, 1363 * then the number of VALUEs received should always 1364 * be less than or equal to the number of VARs and 1365 * USERVARs received. 1366 * 1367 * If we got exactly as many VALUEs as VARs and 1368 * USERVARs, the client has the same definitions. 1369 * 1370 * If we got exactly as many VARs as VALUEs and 1371 * USERVARS, the client has reversed definitions. 1372 */ 1373 if (got_uservar + got_var == got_value) { 1374 env_ovar_ok: 1375 env_ovar = OLD_ENV_VAR; 1376 env_ovalue = OLD_ENV_VALUE; 1377 } else if (got_uservar + got_value == got_var) { 1378 env_ovar_wrong: 1379 env_ovar = OLD_ENV_VALUE; 1380 env_ovalue = OLD_ENV_VAR; 1381 DIAG(TD_OPTIONS, {output_data( 1382 "ENVIRON VALUE and VAR are reversed!\r\n");}); 1383 1384 } 1385 } 1386 SB_RESTORE(); 1387 #endif 1388 1389 while (!SB_EOF()) { 1390 c = SB_GET(); 1391 if ((c == env_ovar) || (c == ENV_USERVAR)) 1392 break; 1393 } 1394 } 1395 1396 if (SB_EOF()) 1397 return; 1398 1399 cp = varp = (char *)subpointer; 1400 valp = 0; 1401 1402 while (!SB_EOF()) { 1403 c = SB_GET(); 1404 if (subchar == TELOPT_OLD_ENVIRON) { 1405 if (c == env_ovar) 1406 c = NEW_ENV_VAR; 1407 else if (c == env_ovalue) 1408 c = NEW_ENV_VALUE; 1409 } 1410 switch (c) { 1411 1412 case NEW_ENV_VALUE: 1413 *cp = '\0'; 1414 cp = valp = (char *)subpointer; 1415 break; 1416 1417 case NEW_ENV_VAR: 1418 case ENV_USERVAR: 1419 *cp = '\0'; 1420 if (envvarok(varp)) { 1421 if (valp) 1422 (void)setenv(varp, valp, 1); 1423 else 1424 unsetenv(varp); 1425 } 1426 cp = varp = (char *)subpointer; 1427 valp = 0; 1428 break; 1429 1430 case ENV_ESC: 1431 if (SB_EOF()) 1432 break; 1433 c = SB_GET(); 1434 /* FALL THROUGH */ 1435 default: 1436 *cp++ = c; 1437 break; 1438 } 1439 } 1440 *cp = '\0'; 1441 if (envvarok(varp)) { 1442 if (valp) 1443 (void)setenv(varp, valp, 1); 1444 else 1445 unsetenv(varp); 1446 } 1447 break; 1448 } /* end of case TELOPT_NEW_ENVIRON */ 1449 #ifdef AUTHENTICATION 1450 case TELOPT_AUTHENTICATION: 1451 if (SB_EOF()) 1452 break; 1453 switch(SB_GET()) { 1454 case TELQUAL_SEND: 1455 case TELQUAL_REPLY: 1456 /* 1457 * These are sent by us and cannot be sent by 1458 * the client. 1459 */ 1460 break; 1461 case TELQUAL_IS: 1462 auth_is(subpointer, SB_LEN()); 1463 break; 1464 case TELQUAL_NAME: 1465 auth_name(subpointer, SB_LEN()); 1466 break; 1467 } 1468 break; 1469 #endif 1470 #ifdef ENCRYPTION 1471 case TELOPT_ENCRYPT: 1472 if (SB_EOF()) 1473 break; 1474 switch(SB_GET()) { 1475 case ENCRYPT_SUPPORT: 1476 encrypt_support(subpointer, SB_LEN()); 1477 break; 1478 case ENCRYPT_IS: 1479 encrypt_is(subpointer, SB_LEN()); 1480 break; 1481 case ENCRYPT_REPLY: 1482 encrypt_reply(subpointer, SB_LEN()); 1483 break; 1484 case ENCRYPT_START: 1485 encrypt_start(subpointer, SB_LEN()); 1486 break; 1487 case ENCRYPT_END: 1488 encrypt_end(); 1489 break; 1490 case ENCRYPT_REQSTART: 1491 encrypt_request_start(subpointer, SB_LEN()); 1492 break; 1493 case ENCRYPT_REQEND: 1494 /* 1495 * We can always send an REQEND so that we cannot 1496 * get stuck encrypting. We should only get this 1497 * if we have been able to get in the correct mode 1498 * anyhow. 1499 */ 1500 encrypt_request_end(); 1501 break; 1502 case ENCRYPT_ENC_KEYID: 1503 encrypt_enc_keyid(subpointer, SB_LEN()); 1504 break; 1505 case ENCRYPT_DEC_KEYID: 1506 encrypt_dec_keyid(subpointer, SB_LEN()); 1507 break; 1508 default: 1509 break; 1510 } 1511 break; 1512 #endif /* ENCRYPTION */ 1513 1514 default: 1515 break; 1516 } /* end of switch */ 1517 1518 } /* end of suboption */ 1519 1520 #ifdef LINEMODE 1521 void 1522 doclientstat(void) 1523 { 1524 clientstat(TELOPT_LINEMODE, WILL, 0); 1525 } 1526 #endif /* LINEMODE */ 1527 1528 void 1529 send_status(void) 1530 { 1531 #define ADD(c) \ 1532 do { \ 1533 if (ep > ncp) \ 1534 *ncp++ = c; \ 1535 else \ 1536 goto trunc; \ 1537 } while (0) 1538 #define ADD_DATA(c) \ 1539 do { \ 1540 ADD(c); if (c == SE || c == IAC) ADD(c); \ 1541 } while (0) 1542 1543 unsigned char statusbuf[256]; 1544 unsigned char *ep; 1545 unsigned char *ncp; 1546 unsigned char i; 1547 1548 ncp = statusbuf; 1549 ep = statusbuf + sizeof(statusbuf); 1550 1551 netflush(); /* get rid of anything waiting to go out */ 1552 1553 ADD(IAC); 1554 ADD(SB); 1555 ADD(TELOPT_STATUS); 1556 ADD(TELQUAL_IS); 1557 1558 /* 1559 * We check the want_state rather than the current state, 1560 * because if we received a DO/WILL for an option that we 1561 * don't support, and the other side didn't send a DONT/WONT 1562 * in response to our WONT/DONT, then the "state" will be 1563 * WILL/DO, and the "want_state" will be WONT/DONT. We 1564 * need to go by the latter. 1565 */ 1566 for (i = 0; i < (unsigned char)NTELOPTS; i++) { 1567 if (my_want_state_is_will(i)) { 1568 ADD(WILL); 1569 ADD_DATA(i); 1570 } 1571 if (his_want_state_is_will(i)) { 1572 ADD(DO); 1573 ADD_DATA(i); 1574 } 1575 } 1576 1577 if (his_want_state_is_will(TELOPT_LFLOW)) { 1578 ADD(SB); 1579 ADD(TELOPT_LFLOW); 1580 if (flowmode) { 1581 ADD(LFLOW_ON); 1582 } else { 1583 ADD(LFLOW_OFF); 1584 } 1585 ADD(SE); 1586 1587 if (restartany >= 0) { 1588 ADD(SB); 1589 ADD(TELOPT_LFLOW); 1590 if (restartany) { 1591 ADD(LFLOW_RESTART_ANY); 1592 } else { 1593 ADD(LFLOW_RESTART_XON); 1594 } 1595 ADD(SE); 1596 } 1597 } 1598 1599 #ifdef LINEMODE 1600 if (his_want_state_is_will(TELOPT_LINEMODE)) { 1601 unsigned char *cp, *cpe; 1602 int len; 1603 1604 ADD(SB); 1605 ADD(TELOPT_LINEMODE); 1606 ADD(LM_MODE); 1607 ADD_DATA(editmode); 1608 ADD(SE); 1609 1610 ADD(SB); 1611 ADD(TELOPT_LINEMODE); 1612 ADD(LM_SLC); 1613 start_slc(0); 1614 send_slc(); 1615 len = end_slc(&cp); 1616 for (cpe = cp + len; cp < cpe; cp++) 1617 ADD_DATA(*cp); 1618 ADD(SE); 1619 } 1620 #endif /* LINEMODE */ 1621 1622 ADD(IAC); 1623 ADD(SE); 1624 1625 writenet(statusbuf, ncp - statusbuf); 1626 netflush(); /* Send it on its way */ 1627 1628 DIAG(TD_OPTIONS, 1629 {printsub('>', statusbuf, ncp - statusbuf); netflush();}); 1630 return; 1631 1632 trunc: 1633 /* XXX bark? */ 1634 return; 1635 #undef ADD 1636 #undef ADD_DATA 1637 } 1638 1639 int 1640 output_data(const char *format, ...) 1641 { 1642 va_list args; 1643 size_t remaining, ret; 1644 1645 va_start(args, format); 1646 remaining = BUFSIZ - (nfrontp - netobuf); 1647 /* try a netflush() if the room is too low */ 1648 if (strlen(format) > remaining || BUFSIZ / 4 > remaining) { 1649 netflush(); 1650 remaining = BUFSIZ - (nfrontp - netobuf); 1651 } 1652 ret = vsnprintf(nfrontp, remaining, format, args); 1653 nfrontp += ((ret < remaining - 1) ? ret : remaining - 1); 1654 va_end(args); 1655 return ret; 1656 } 1657 1658 int 1659 output_datalen(const char *buf, size_t l) 1660 { 1661 size_t remaining; 1662 1663 remaining = BUFSIZ - (nfrontp - netobuf); 1664 if (remaining < l) { 1665 netflush(); 1666 remaining = BUFSIZ - (nfrontp - netobuf); 1667 } 1668 if (remaining < l) 1669 return -1; 1670 memmove(nfrontp, buf, l); 1671 nfrontp += l; 1672 return (int)l; 1673 } 1674
Indexes created Sun Sep 21 20:09:37 GMT 2025