1 /* $NetBSD: pms.c,v 1.42 2024/12/07 23:25:19 chs Exp $ */ 2 3 /*- 4 * Copyright (c) 2004 Kentaro Kurahone. 5 * Copyright (c) 2004 Ales Krenek. 6 * Copyright (c) 1994 Charles M. Hannum. 7 * Copyright (c) 1992, 1993 Erik Forsberg. 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 16 * THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED 17 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 18 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 19 * NO EVENT SHALL I BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 20 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 21 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 22 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 23 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 24 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 25 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 */ 27 28 #include <sys/cdefs.h> 29 __KERNEL_RCSID(0, "$NetBSD: pms.c,v 1.42 2024/12/07 23:25:19 chs Exp $"); 30 31 #include "opt_pms.h" 32 33 #include <sys/param.h> 34 #include <sys/systm.h> 35 #include <sys/device.h> 36 #include <sys/ioctl.h> 37 #include <sys/kernel.h> 38 #include <sys/kthread.h> 39 40 #include <sys/bus.h> 41 42 #include <dev/pckbport/pckbportvar.h> 43 #ifdef PMS_SYNAPTICS_TOUCHPAD 44 #include <dev/pckbport/synapticsvar.h> 45 #endif 46 #ifdef PMS_ELANTECH_TOUCHPAD 47 #include <dev/pckbport/elantechvar.h> 48 #endif 49 #ifdef PMS_ALPS_TOUCHPAD 50 #include <dev/pckbport/alpsvar.h> 51 #endif 52 53 #include <dev/pckbport/pmsreg.h> 54 #include <dev/pckbport/pmsvar.h> 55 56 57 #include <dev/wscons/wsconsio.h> 58 #include <dev/wscons/wsmousevar.h> 59 60 #ifdef PMSDEBUG 61 int pmsdebug = 1; 62 #define DPRINTF(x) if (pmsdebug) printf x 63 #else 64 #define DPRINTF(x) 65 #endif 66 67 static const enum pms_type tries[] = { 68 PMS_SCROLL5, PMS_SCROLL3, PMS_STANDARD, PMS_UNKNOWN 69 }; 70 71 static const struct pms_protocol pms_protocols[] = { 72 { { 0, 0, 0 }, 0, "unknown protocol" }, 73 { { 0, 0, 0 }, 0, "no scroll wheel (3 buttons)" }, 74 { { 200, 100, 80 }, 3, "scroll wheel (3 buttons)" }, 75 { { 200, 200, 80 }, 4, "scroll wheel (5 buttons)" }, 76 { { 0, 0, 0 }, 0, "synaptics" }, 77 { { 0, 0, 0 }, 0, "elantech" } 78 }; 79 80 81 static int pmsprobe(device_t, cfdata_t, void *); 82 static void pmsattach(device_t, device_t, void *); 83 static void pmsinput(void *, int); 84 85 CFATTACH_DECL_NEW(pms, sizeof(struct pms_softc), 86 pmsprobe, pmsattach, NULL, NULL); 87 88 static int pms_protocol(pckbport_tag_t, pckbport_slot_t); 89 static void do_enable(struct pms_softc *); 90 static void do_disable(struct pms_softc *); 91 static void pms_reset_thread(void*); 92 static int pms_enable(void *); 93 static int pms_ioctl(void *, u_long, void *, int, struct lwp *); 94 static void pms_disable(void *); 95 96 static bool pms_suspend(device_t, const pmf_qual_t *); 97 static bool pms_resume(device_t, const pmf_qual_t *); 98 99 static const struct wsmouse_accessops pms_accessops = { 100 .enable = pms_enable, 101 .ioctl = pms_ioctl, 102 .disable = pms_disable, 103 }; 104 105 static int 106 pms_protocol(pckbport_tag_t tag, pckbport_slot_t slot) 107 { 108 u_char cmd[2], resp[1]; 109 int i, j, res; 110 const struct pms_protocol *p; 111 112 for (j = 0; j < sizeof(tries) / sizeof(tries[0]); ++j) { 113 p = &pms_protocols[tries[j]]; 114 if (!p->rates[0]) 115 break; 116 cmd[0] = PMS_SET_SAMPLE; 117 for (i = 0; i < 3; i++) { 118 cmd[1] = p->rates[i]; 119 res = pckbport_enqueue_cmd(tag, slot, cmd, 2, 0, 1, 0); 120 if (res) 121 return PMS_STANDARD; 122 } 123 124 cmd[0] = PMS_SEND_DEV_ID; 125 res = pckbport_enqueue_cmd(tag, slot, cmd, 1, 1, 1, resp); 126 if (res) 127 return PMS_UNKNOWN; 128 if (resp[0] == p->response) { 129 DPRINTF(("pms_protocol: found mouse protocol %d\n", 130 tries[j])); 131 return tries[j]; 132 } 133 } 134 DPRINTF(("pms_protocol: standard PS/2 protocol (no scroll wheel)\n")); 135 return PMS_STANDARD; 136 } 137 138 int 139 pmsprobe(device_t parent, cfdata_t match, void *aux) 140 { 141 struct pckbport_attach_args *pa = aux; 142 u_char cmd[1], resp[2]; 143 int res; 144 145 if (pa->pa_slot != PCKBPORT_AUX_SLOT) 146 return 0; 147 148 /* Flush any garbage. */ 149 pckbport_flush(pa->pa_tag, pa->pa_slot); 150 151 /* reset the device */ 152 cmd[0] = PMS_RESET; 153 res = pckbport_poll_cmd(pa->pa_tag, pa->pa_slot, cmd, 1, 2, resp, 1); 154 if (res) { 155 aprint_debug("pmsprobe: reset error %d\n", res); 156 return 0; 157 } 158 if (resp[0] != PMS_RSTDONE) { 159 printf("pmsprobe: reset response 0x%x\n", resp[0]); 160 return 0; 161 } 162 163 /* get type number (0 = mouse) */ 164 if (resp[1] != 0) { 165 aprint_debug("pmsprobe: type 0x%x\n", resp[1]); 166 return 0; 167 } 168 169 return 10; 170 } 171 172 static void 173 pmsattach(device_t parent, device_t self, void *aux) 174 { 175 struct pms_softc *sc = device_private(self); 176 struct pckbport_attach_args *pa = aux; 177 struct wsmousedev_attach_args a; 178 u_char cmd[2], resp[2]; 179 int res; 180 181 sc->sc_dev = self; 182 sc->sc_kbctag = pa->pa_tag; 183 sc->sc_kbcslot = pa->pa_slot; 184 185 aprint_naive("\n"); 186 aprint_normal("\n"); 187 188 /* Flush any garbage. */ 189 pckbport_flush(pa->pa_tag, pa->pa_slot); 190 191 /* reset the device */ 192 cmd[0] = PMS_RESET; 193 res = pckbport_poll_cmd(pa->pa_tag, pa->pa_slot, cmd, 1, 2, resp, 1); 194 if (res || resp[0] != PMS_RSTDONE || resp[1] != 0) { 195 aprint_debug("pmsattach: reset error\n"); 196 return; 197 } 198 sc->inputstate = 0; 199 sc->buttons = 0; 200 sc->protocol = PMS_UNKNOWN; 201 202 #ifdef PMS_SYNAPTICS_TOUCHPAD 203 /* Probe for synaptics touchpad. */ 204 if (pms_synaptics_probe_init(sc) == 0) { 205 sc->protocol = PMS_SYNAPTICS; 206 } else 207 #endif 208 #ifdef PMS_ELANTECH_TOUCHPAD 209 if (pms_elantech_probe_init(sc) == 0) { 210 sc->protocol = PMS_ELANTECH; 211 } else 212 #endif 213 #ifdef PMS_ALPS_TOUCHPAD 214 if (pms_alps_probe_init(sc) == 0) { 215 sc->protocol = PMS_ALPS; 216 } else 217 #endif 218 /* Install generic handler. */ 219 pckbport_set_inputhandler(sc->sc_kbctag, sc->sc_kbcslot, 220 pmsinput, sc, device_xname(sc->sc_dev)); 221 222 a.accessops = &pms_accessops; 223 a.accesscookie = sc; 224 225 /* 226 * Attach the wsmouse, saving a handle to it. 227 * Note that we don't need to check this pointer against NULL 228 * here or in pmsintr, because if this fails pms_enable() will 229 * never be called, so pmsinput() will never be called. 230 */ 231 sc->sc_wsmousedev = config_found(self, &a, wsmousedevprint, CFARGS_NONE); 232 233 /* no interrupts until enabled */ 234 cmd[0] = PMS_DEV_DISABLE; 235 res = pckbport_poll_cmd(pa->pa_tag, pa->pa_slot, cmd, 1, 0, NULL, 0); 236 if (res) 237 aprint_error("pmsattach: disable error\n"); 238 pckbport_slot_enable(sc->sc_kbctag, sc->sc_kbcslot, 0); 239 240 kthread_create(PRI_NONE, 0, NULL, pms_reset_thread, sc, 241 &sc->sc_event_thread, "%s", device_xname(sc->sc_dev)); 242 243 if (!pmf_device_register(self, pms_suspend, pms_resume)) 244 aprint_error_dev(self, "couldn't establish power handler\n"); 245 } 246 247 static void 248 do_enable(struct pms_softc *sc) 249 { 250 u_char cmd[2]; 251 int res; 252 253 sc->inputstate = 0; 254 sc->buttons = 0; 255 256 pckbport_slot_enable(sc->sc_kbctag, sc->sc_kbcslot, 1); 257 258 #ifdef PMS_SYNAPTICS_TOUCHPAD 259 if (sc->protocol == PMS_SYNAPTICS) 260 pms_synaptics_enable(sc); 261 #endif 262 #ifdef PMS_ELANTECH_TOUCHPAD 263 if (sc->protocol == PMS_ELANTECH) 264 pms_elantech_enable(sc); 265 #endif 266 #ifdef PMS_ALPS_TOUCHPAD 267 if (sc->protocol == PMS_ALPS) 268 pms_alps_enable(sc); 269 #endif 270 271 cmd[0] = PMS_DEV_ENABLE; 272 res = pckbport_enqueue_cmd(sc->sc_kbctag, sc->sc_kbcslot, cmd, 273 1, 0, 1, 0); 274 if (res) 275 aprint_error("pms_enable: command error %d\n", res); 276 277 if (sc->protocol == PMS_UNKNOWN) 278 sc->protocol = pms_protocol(sc->sc_kbctag, sc->sc_kbcslot); 279 DPRINTF(("pms_enable: using %s protocol\n", 280 pms_protocols[sc->protocol].name)); 281 #if 0 282 { 283 u_char scmd[2]; 284 285 scmd[0] = PMS_SET_RES; 286 scmd[1] = 3; /* 8 counts/mm */ 287 res = pckbport_enqueue_cmd(sc->sc_kbctag, sc->sc_kbcslot, scmd, 288 2, 0, 1, 0); 289 if (res) 290 printf("pms_enable: setup error1 (%d)\n", res); 291 292 scmd[0] = PMS_SET_SCALE21; 293 res = pckbport_enqueue_cmd(sc->sc_kbctag, sc->sc_kbcslot, scmd, 294 1, 0, 1, 0); 295 if (res) 296 printf("pms_enable: setup error2 (%d)\n", res); 297 298 scmd[0] = PMS_SET_SAMPLE; 299 scmd[1] = 100; /* 100 samples/sec */ 300 res = pckbport_enqueue_cmd(sc->sc_kbctag, sc->sc_kbcslot, scmd, 301 2, 0, 1, 0); 302 if (res) 303 printf("pms_enable: setup error3 (%d)\n", res); 304 } 305 #endif 306 } 307 308 static void 309 do_disable(struct pms_softc *sc) 310 { 311 u_char cmd[1]; 312 int res; 313 314 cmd[0] = PMS_DEV_DISABLE; 315 res = pckbport_enqueue_cmd(sc->sc_kbctag, sc->sc_kbcslot, cmd, 316 1, 0, 1, 0); 317 if (res) 318 aprint_error("pms_disable: command error\n"); 319 320 pckbport_slot_enable(sc->sc_kbctag, sc->sc_kbcslot, 0); 321 } 322 323 static int 324 pms_enable(void *v) 325 { 326 struct pms_softc *sc = v; 327 int s; 328 329 if (sc->sc_enabled) 330 return EBUSY; 331 332 do_enable(sc); 333 334 s = spltty(); 335 sc->sc_enabled = 1; 336 splx(s); 337 338 return 0; 339 } 340 341 static void 342 pms_disable(void *v) 343 { 344 struct pms_softc *sc = v; 345 int s; 346 347 do_disable(sc); 348 349 s = spltty(); 350 sc->sc_enabled = 0; 351 splx(s); 352 } 353 354 static bool 355 pms_suspend(device_t dv, const pmf_qual_t *qual) 356 { 357 struct pms_softc *sc = device_private(dv); 358 359 if (sc->sc_enabled) 360 do_disable(sc); 361 362 return true; 363 } 364 365 static bool 366 pms_resume(device_t dv, const pmf_qual_t *qual) 367 { 368 struct pms_softc *sc = device_private(dv); 369 370 #ifdef PMS_SYNAPTICS_TOUCHPAD 371 if (sc->protocol == PMS_SYNAPTICS) { 372 pms_synaptics_resume(sc); 373 if (sc->sc_enabled) { 374 do_enable(sc); 375 } 376 } else 377 #endif 378 #ifdef PMS_ELANTECH_TOUCHPAD 379 if (sc->protocol == PMS_ELANTECH) { 380 pms_elantech_resume(sc); 381 if (sc->sc_enabled) { 382 do_enable(sc); 383 } 384 } else 385 #endif 386 #ifdef PMS_ALPS_TOUCHPAD 387 if (sc->protocol == PMS_ALPS) { 388 pms_alps_resume(sc); 389 if (sc->sc_enabled) { 390 do_enable(sc); 391 } 392 } else 393 #endif 394 if (sc->sc_enabled) { 395 /* recheck protocol & init mouse */ 396 sc->protocol = PMS_UNKNOWN; 397 do_enable(sc); /* only if we were suspended */ 398 } 399 400 return true; 401 } 402 403 static int 404 pms_ioctl(void *v, u_long cmd, void *data, int flag, 405 struct lwp *l) 406 { 407 struct pms_softc *sc = v; 408 u_char kbcmd[2]; 409 int i; 410 411 switch (cmd) { 412 case WSMOUSEIO_GTYPE: 413 *(u_int *)data = WSMOUSE_TYPE_PS2; 414 break; 415 416 case WSMOUSEIO_SRES: 417 i = (*(u_int *)data - 12) / 25; 418 419 if (i < 0) 420 i = 0; 421 422 if (i > 3) 423 i = 3; 424 425 kbcmd[0] = PMS_SET_RES; 426 kbcmd[1] = i; 427 i = pckbport_enqueue_cmd(sc->sc_kbctag, sc->sc_kbcslot, kbcmd, 428 2, 0, 1, 0); 429 430 if (i) 431 printf("pms_ioctl: SET_RES command error\n"); 432 break; 433 434 default: 435 return EPASSTHROUGH; 436 } 437 return 0; 438 } 439 440 static void 441 pms_reset_thread(void *arg) 442 { 443 struct pms_softc *sc = arg; 444 u_char cmd[1], resp[2]; 445 int res; 446 int save_protocol; 447 448 for (;;) { 449 tsleep(&sc->sc_enabled, PWAIT, "pmsreset", 0); 450 #ifdef PMSDEBUG 451 if (pmsdebug) 452 #endif 453 #if defined(PMSDEBUG) || defined(DIAGNOSTIC) 454 aprint_debug_dev(sc->sc_dev, 455 "resetting mouse interface\n"); 456 #endif 457 save_protocol = sc->protocol; 458 pms_disable(sc); 459 cmd[0] = PMS_RESET; 460 res = pckbport_enqueue_cmd(sc->sc_kbctag, sc->sc_kbcslot, cmd, 461 1, 2, 1, resp); 462 if (res) { 463 DPRINTF(("%s: reset error %d\n", 464 device_xname(sc->sc_dev), res)); 465 } 466 467 /* For the synaptics and elantech case, leave the protocol alone. */ 468 if (sc->protocol != PMS_SYNAPTICS && sc->protocol != PMS_ELANTECH 469 && sc->protocol != PMS_ALPS) 470 sc->protocol = PMS_UNKNOWN; 471 472 pms_enable(sc); 473 if (sc->protocol != save_protocol) { 474 #if defined(PMSDEBUG) || defined(DIAGNOSTIC) 475 aprint_verbose_dev(sc->sc_dev, 476 "protocol change, sleeping and retrying\n"); 477 #endif 478 pms_disable(sc); 479 cmd[0] = PMS_RESET; 480 res = pckbport_enqueue_cmd(sc->sc_kbctag, 481 sc->sc_kbcslot, cmd, 1, 2, 1, resp); 482 if (res) { 483 DPRINTF(("%s: reset error %d\n", 484 device_xname(sc->sc_dev), res)); 485 } 486 tsleep(pms_reset_thread, PWAIT, "pmsreset", hz); 487 cmd[0] = PMS_RESET; 488 res = pckbport_enqueue_cmd(sc->sc_kbctag, 489 sc->sc_kbcslot, cmd, 1, 2, 1, resp); 490 if (res) { 491 DPRINTF(("%s: reset error %d\n", 492 device_xname(sc->sc_dev), res)); 493 } 494 sc->protocol = PMS_UNKNOWN; /* reprobe protocol */ 495 pms_enable(sc); 496 #if defined(PMSDEBUG) || defined(DIAGNOSTIC) 497 if (sc->protocol != save_protocol) { 498 printf("%s: protocol changed.\n", 499 device_xname(sc->sc_dev)); 500 } 501 #endif 502 } 503 } 504 } 505 506 /* Masks for the first byte of a packet */ 507 #define PMS_LBUTMASK 0x01 508 #define PMS_RBUTMASK 0x02 509 #define PMS_MBUTMASK 0x04 510 #define PMS_4BUTMASK 0x10 511 #define PMS_5BUTMASK 0x20 512 513 static void 514 pmsinput(void *vsc, int data) 515 { 516 struct pms_softc *sc = vsc; 517 u_int changed; 518 int dx, dy, dz = 0; 519 int newbuttons = 0; 520 521 if (!sc->sc_enabled) { 522 /* Interrupts are not expected. Discard the byte. */ 523 return; 524 } 525 526 getmicrouptime(&sc->current); 527 528 if (sc->inputstate > 0) { 529 struct timeval diff; 530 531 timersub(&sc->current, &sc->last, &diff); 532 /* 533 * Empirically, the delay should be about 1700us on a standard 534 * PS/2 port. I have seen delays as large as 4500us (rarely) 535 * in regular use. When using a confused mouse, I generally 536 * see delays at least as large as 30,000us. -seebs 537 * 538 * The thinkpad trackball returns at 22-23ms. So we use 539 * >= 40ms. In the future, I'll implement adaptable timeout 540 * by increasing the timeout if the mouse reset happens 541 * too frequently -christos 542 */ 543 if (diff.tv_sec > 0 || diff.tv_usec >= 40000) { 544 DPRINTF(("pms_input: unusual delay (%ld.%06ld s), " 545 "scheduling reset\n", 546 (long)diff.tv_sec, (long)diff.tv_usec)); 547 sc->inputstate = 0; 548 sc->sc_enabled = 0; 549 wakeup(&sc->sc_enabled); 550 return; 551 } 552 } 553 sc->last = sc->current; 554 555 if (sc->inputstate == 0) { 556 /* 557 * Some devices (seen on trackballs anytime, and on 558 * some mice shortly after reset) output garbage bytes 559 * between packets. Just ignore them. 560 */ 561 if ((data & 0xc0) != 0 && (data & 0xff) != PMS_RSTDONE) 562 return; /* not in sync yet, discard input */ 563 } 564 if (sc->inputstate >= sizeof(sc->packet)) 565 panic("inputstate should never be %d", sc->inputstate); 566 567 sc->packet[sc->inputstate++] = data & 0xff; 568 switch (sc->inputstate) { 569 case 0: 570 /* no useful processing can be done yet */ 571 break; 572 573 case 1: 574 /* 575 * Why should we test for bit 0x8 and insist on it here? 576 * The old (psm.c and psm_intelli.c) drivers didn't do 577 * it, and there are devices where it does harm (that's 578 * why it is not used if using PMS_STANDARD protocol). 579 * Anyway, it does not to cause any harm to accept packets 580 * without this bit. 581 */ 582 #if 0 583 if (sc->protocol == PMS_STANDARD) 584 break; 585 if (!(sc->packet[0] & 0x8)) { 586 DPRINTF(("pmsinput: 0x8 not set in first byte " 587 "[0x%02x], resetting\n", sc->packet[0])); 588 sc->inputstate = 0; 589 sc->sc_enabled = 0; 590 wakeup(&sc->sc_enabled); 591 return; 592 } 593 #endif 594 break; 595 596 case 2: 597 if (sc->packet[0] == PMS_RSTDONE && sc->packet[1] == 0) { 598 device_printf(sc->sc_dev, "received BAT completion, resetting\n"); 599 sc->inputstate = 0; 600 sc->sc_enabled = 0; 601 wakeup(&sc->sc_enabled); 602 return; 603 } 604 break; 605 606 case 4: 607 /* Case 4 is a superset of case 3. This is *not* an accident. */ 608 if (sc->protocol == PMS_SCROLL3) { 609 dz = sc->packet[3]; 610 if (dz >= 128) 611 dz -= 256; 612 if (dz == -128) 613 dz = -127; 614 } else if (sc->protocol == PMS_SCROLL5) { 615 dz = sc->packet[3] & 0xf; 616 if (dz >= 8) 617 dz -= 16; 618 if (sc->packet[3] & PMS_4BUTMASK) 619 newbuttons |= 0x8; 620 if (sc->packet[3] & PMS_5BUTMASK) 621 newbuttons |= 0x10; 622 } else { 623 DPRINTF(("pmsinput: why am I looking at this byte?\n")); 624 dz = 0; 625 } 626 /* FALLTHROUGH */ 627 case 3: 628 /* 629 * This is only an endpoint for scroll protocols with 4 630 * bytes, or the standard protocol with 3. 631 */ 632 if (sc->protocol != PMS_STANDARD && sc->inputstate == 3) 633 break; 634 635 newbuttons |= ((sc->packet[0] & PMS_LBUTMASK) ? 0x1 : 0) | 636 ((sc->packet[0] & PMS_MBUTMASK) ? 0x2 : 0) | 637 ((sc->packet[0] & PMS_RBUTMASK) ? 0x4 : 0); 638 639 dx = sc->packet[1]; 640 if (dx >= 128) 641 dx -= 256; 642 if (dx == -128) 643 dx = -127; 644 645 dy = sc->packet[2]; 646 if (dy >= 128) 647 dy -= 256; 648 if (dy == -128) 649 dy = -127; 650 651 sc->inputstate = 0; 652 changed = (sc->buttons ^ newbuttons); 653 sc->buttons = newbuttons; 654 655 #ifdef PMSDEBUG 656 if (sc->protocol == PMS_STANDARD) { 657 DPRINTF(("pms: packet: 0x%02x%02x%02x\n", 658 sc->packet[0], sc->packet[1], sc->packet[2])); 659 } else { 660 DPRINTF(("pms: packet: 0x%02x%02x%02x%02x\n", 661 sc->packet[0], sc->packet[1], sc->packet[2], 662 sc->packet[3])); 663 } 664 #endif 665 if (dx || dy || dz || changed) { 666 #ifdef PMSDEBUG 667 DPRINTF(("pms: x %+03d y %+03d z %+03d " 668 "buttons 0x%02x\n", dx, dy, dz, sc->buttons)); 669 #endif 670 wsmouse_input(sc->sc_wsmousedev, 671 sc->buttons, dx, dy, dz, 0, 672 WSMOUSE_INPUT_DELTA); 673 } 674 memset(sc->packet, 0, 4); 675 break; 676 677 /* If we get here, we have problems. */ 678 default: 679 printf("pmsinput: very confused. resetting.\n"); 680 sc->inputstate = 0; 681 sc->sc_enabled = 0; 682 wakeup(&sc->sc_enabled); 683 return; 684 } 685 } 686 687 /* 688 * Touchpad special command sequence used by Synaptics and others. 689 * Sends 0xE6 0xE8 rr 0xE8 ss 0xE8 tt 0xE8 uu where (rr*64)+(ss*16)+(tt*4)+uu 690 */ 691 int 692 pms_sliced_command(pckbport_tag_t tag, pckbport_slot_t slot, u_char scmd) 693 { 694 u_char cmd[2]; 695 int i, err, ret = 0; 696 697 cmd[0] = PMS_SET_SCALE11; 698 ret = pckbport_poll_cmd(tag, slot, cmd, 1, 0, NULL, 0); 699 700 /* 701 * Need to send 4 Set Resolution commands, with the argument 702 * encoded in the bottom most 2 bits. 703 */ 704 for (i = 6; i >= 0; i -= 2) { 705 cmd[0] = PMS_SET_RES; 706 cmd[1] = (scmd >> i) & 3; 707 err = pckbport_poll_cmd(tag, slot, cmd, 2, 0, NULL, 0); 708 if (ret == 0 && err != 0) { 709 ret = err; 710 } 711 } 712 713 return ret; 714 } 715
Indexes created Fri Sep 26 08:10:20 GMT 2025