1 /* $NetBSD: moused.c,v 1.33 2025/07/11 22:19:54 andvar Exp $ */ 2 /** 3 ** Copyright (c) 1995 Michael Smith, All rights reserved. 4 ** 5 ** Redistribution and use in source and binary forms, with or without 6 ** modification, are permitted provided that the following conditions 7 ** are met: 8 ** 1. Redistributions of source code must retain the above copyright 9 ** notice, this list of conditions and the following disclaimer as 10 ** the first lines of this file unmodified. 11 ** 2. Redistributions in binary form must reproduce the above copyright 12 ** notice, this list of conditions and the following disclaimer in the 13 ** documentation and/or other materials provided with the distribution. 14 ** 3. All advertising materials mentioning features or use of this software 15 ** must display the following acknowledgment: 16 ** This product includes software developed by Michael Smith. 17 ** 4. The name of the author may not be used to endorse or promote products 18 ** derived from this software without specific prior written permission. 19 ** 20 ** 21 ** THIS SOFTWARE IS PROVIDED BY Michael Smith ``AS IS'' AND ANY 22 ** EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 ** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 24 ** PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL Michael Smith BE LIABLE FOR 25 ** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 ** CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 ** SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 28 ** BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 29 ** WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE 30 ** OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, 31 ** EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 32 ** 33 **/ 34 35 /** 36 ** MOUSED.C 37 ** 38 ** Mouse daemon : listens to a serial port, the bus mouse interface, or 39 ** the PS/2 mouse port for mouse data stream, interprets data and passes 40 ** ioctls off to the console driver. 41 ** 42 ** The mouse interface functions are derived closely from the mouse 43 ** handler in the XFree86 X server. Many thanks to the XFree86 people 44 ** for their great work! 45 ** 46 **/ 47 48 #include <sys/cdefs.h> 49 50 #ifndef lint 51 __RCSID("$NetBSD: moused.c,v 1.33 2025/07/11 22:19:54 andvar Exp $"); 52 #endif /* not lint */ 53 54 #include <ctype.h> 55 #include <err.h> 56 #include <errno.h> 57 #include <fcntl.h> 58 #include <limits.h> 59 #include <stdio.h> 60 #include <stdlib.h> 61 #include <stdarg.h> 62 #include <string.h> 63 #include <signal.h> 64 #include <setjmp.h> 65 #include <termios.h> 66 #include <syslog.h> 67 #include "mouse.h" 68 #include <sys/ioctl.h> 69 #include <dev/wscons/wsconsio.h> 70 #include <sys/types.h> 71 #include <sys/time.h> 72 #include <sys/socket.h> 73 #include <stdint.h> 74 #include <sys/un.h> 75 #include <poll.h> 76 #include <unistd.h> 77 78 #define MAX_CLICKTHRESHOLD 2000 /* 2 seconds */ 79 #define MAX_BUTTON2TIMEOUT 2000 /* 2 seconds */ 80 #define DFLT_CLICKTHRESHOLD 500 /* 0.5 second */ 81 #define DFLT_BUTTON2TIMEOUT 100 /* 0.1 second */ 82 83 /* Abort 3-button emulation delay after this many movement events. */ 84 #define BUTTON2_MAXMOVE 3 85 86 #define TRUE 1 87 #define FALSE 0 88 89 #define MOUSE_XAXIS (-1) 90 #define MOUSE_YAXIS (-2) 91 92 /* Logitech PS2++ protocol */ 93 #define MOUSE_PS2PLUS_CHECKBITS(b) \ 94 ((((b[2] & 0x03) << 2) | 0x02) == (b[1] & 0x0f)) 95 #define MOUSE_PS2PLUS_PACKET_TYPE(b) \ 96 (((b[0] & 0x30) >> 2) | ((b[1] & 0x30) >> 4)) 97 98 #define ChordMiddle 0x0001 99 #define Emulate3Button 0x0002 100 #define ClearDTR 0x0004 101 #define ClearRTS 0x0008 102 #define NoPnP 0x0010 103 104 #define ID_NONE 0 105 #define ID_PORT 1 106 #define ID_IF 2 107 #define ID_TYPE 4 108 #define ID_MODEL 8 109 #define ID_ALL (ID_PORT | ID_IF | ID_TYPE | ID_MODEL) 110 111 /* structures */ 112 113 /* symbol table entry */ 114 typedef struct { 115 const char *name; 116 int val; 117 int val2; 118 } symtab_t; 119 120 /* serial PnP ID string */ 121 typedef struct { 122 int revision; /* PnP revision, 100 for 1.00 */ 123 const char *eisaid; /* EISA ID including mfr ID and product ID */ 124 const char *serial; /* serial No, optional */ 125 const char *class; /* device class, optional */ 126 const char *compat; /* list of compatible drivers, optional */ 127 const char *description; /* product description, optional */ 128 int neisaid; /* length of the above fields... */ 129 int nserial; 130 int nclass; 131 int ncompat; 132 int ndescription; 133 } pnpid_t; 134 135 /* global variables */ 136 137 static int dbg = 0; 138 static int nodaemon = FALSE; 139 static int background = FALSE; 140 static int identify = ID_NONE; 141 static const char *pidfile = "/var/run/moused.pid"; 142 143 /* local variables */ 144 145 /* interface (the table must be ordered by MOUSE_IF_XXX in mouse.h) */ 146 static symtab_t rifs[] = { 147 { "serial", MOUSE_IF_SERIAL, 0 }, 148 { "bus", MOUSE_IF_BUS, 0 }, 149 { "inport", MOUSE_IF_INPORT, 0 }, 150 { "ps/2", MOUSE_IF_PS2, 0 }, 151 { "sysmouse", MOUSE_IF_SYSMOUSE, 0 }, 152 { "usb", MOUSE_IF_USB, 0 }, 153 { NULL, MOUSE_IF_UNKNOWN, 0 }, 154 }; 155 156 /* types (the table must be ordered by MOUSE_PROTO_XXX in mouse.h) */ 157 static const char *rnames[] = { 158 "microsoft", 159 "mousesystems", 160 "logitech", 161 "mmseries", 162 "mouseman", 163 "busmouse", 164 "inportmouse", 165 "ps/2", 166 "mmhitab", 167 "glidepoint", 168 "intellimouse", 169 "thinkingmouse", 170 "sysmouse", 171 "x10mouseremote", 172 "kidspad", 173 #if notyet 174 "mariqua", 175 #endif 176 NULL 177 }; 178 179 /* models */ 180 static symtab_t rmodels[] = { 181 { "NetScroll", MOUSE_MODEL_NETSCROLL, 0 }, 182 { "NetMouse/NetScroll Optical", MOUSE_MODEL_NET, 0 }, 183 { "GlidePoint", MOUSE_MODEL_GLIDEPOINT, 0 }, 184 { "ThinkingMouse", MOUSE_MODEL_THINK, 0 }, 185 { "IntelliMouse", MOUSE_MODEL_INTELLI, 0 }, 186 { "EasyScroll/SmartScroll", MOUSE_MODEL_EASYSCROLL, 0 }, 187 { "MouseMan+", MOUSE_MODEL_MOUSEMANPLUS, 0 }, 188 { "Kidspad", MOUSE_MODEL_KIDSPAD, 0 }, 189 { "VersaPad", MOUSE_MODEL_VERSAPAD, 0 }, 190 { "IntelliMouse Explorer", MOUSE_MODEL_EXPLORER, 0 }, 191 { "4D Mouse", MOUSE_MODEL_4D, 0 }, 192 { "4D+ Mouse", MOUSE_MODEL_4DPLUS, 0 }, 193 { "generic", MOUSE_MODEL_GENERIC, 0 }, 194 { NULL, MOUSE_MODEL_UNKNOWN, 0 }, 195 }; 196 197 /* PnP EISA/product IDs */ 198 static symtab_t pnpprod[] = { 199 /* Kensignton ThinkingMouse */ 200 { "KML0001", MOUSE_PROTO_THINK, MOUSE_MODEL_THINK }, 201 /* MS IntelliMouse */ 202 { "MSH0001", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI }, 203 /* MS IntelliMouse TrackBall */ 204 { "MSH0004", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI }, 205 /* Tremon Wheel Mouse MUSD */ 206 { "HTK0001", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI }, 207 /* Genius PnP Mouse */ 208 { "KYE0001", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC }, 209 /* MouseSystems SmartScroll Mouse (OEM from Genius?) */ 210 { "KYE0002", MOUSE_PROTO_MS, MOUSE_MODEL_EASYSCROLL }, 211 /* Genius NetMouse */ 212 { "KYE0003", MOUSE_PROTO_INTELLI, MOUSE_MODEL_NET }, 213 /* Genius Kidspad, Easypad and other tablets */ 214 { "KYE0005", MOUSE_PROTO_KIDSPAD, MOUSE_MODEL_KIDSPAD }, 215 /* Genius EZScroll */ 216 { "KYEEZ00", MOUSE_PROTO_MS, MOUSE_MODEL_EASYSCROLL }, 217 /* Logitech Cordless MouseMan Wheel */ 218 { "LGI8033", MOUSE_PROTO_INTELLI, MOUSE_MODEL_MOUSEMANPLUS }, 219 /* Logitech MouseMan (new 4 button model) */ 220 { "LGI800C", MOUSE_PROTO_INTELLI, MOUSE_MODEL_MOUSEMANPLUS }, 221 /* Logitech MouseMan+ */ 222 { "LGI8050", MOUSE_PROTO_INTELLI, MOUSE_MODEL_MOUSEMANPLUS }, 223 /* Logitech FirstMouse+ */ 224 { "LGI8051", MOUSE_PROTO_INTELLI, MOUSE_MODEL_MOUSEMANPLUS }, 225 /* Logitech serial */ 226 { "LGI8001", MOUSE_PROTO_LOGIMOUSEMAN, MOUSE_MODEL_GENERIC }, 227 /* A4 Tech 4D/4D+ Mouse */ 228 { "A4W0005", MOUSE_PROTO_INTELLI, MOUSE_MODEL_4D }, 229 /* 8D Scroll Mouse */ 230 { "PEC9802", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI }, 231 /* Mitsumi Wireless Scroll Mouse */ 232 { "MTM6401", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI }, 233 234 /* MS bus */ 235 { "PNP0F00", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC }, 236 /* MS serial */ 237 { "PNP0F01", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC }, 238 /* MS InPort */ 239 { "PNP0F02", MOUSE_PROTO_INPORT, MOUSE_MODEL_GENERIC }, 240 /* MS PS/2 */ 241 { "PNP0F03", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC }, 242 /* 243 * EzScroll returns PNP0F04 in the compatible device field; but it 244 * doesn't look compatible... XXX 245 */ 246 /* MouseSystems */ 247 { "PNP0F04", MOUSE_PROTO_MSC, MOUSE_MODEL_GENERIC }, 248 /* MouseSystems */ 249 { "PNP0F05", MOUSE_PROTO_MSC, MOUSE_MODEL_GENERIC }, 250 #if notyet 251 /* Genius Mouse */ 252 { "PNP0F06", MOUSE_PROTO_???, MOUSE_MODEL_GENERIC }, 253 /* Genius Mouse */ 254 { "PNP0F07", MOUSE_PROTO_???, MOUSE_MODEL_GENERIC }, 255 #endif 256 /* Logitech serial */ 257 { "PNP0F08", MOUSE_PROTO_LOGIMOUSEMAN, MOUSE_MODEL_GENERIC }, 258 /* MS BallPoint serial */ 259 { "PNP0F09", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC }, 260 /* MS PnP serial */ 261 { "PNP0F0A", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC }, 262 /* MS PnP BallPoint serial */ 263 { "PNP0F0B", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC }, 264 /* MS serial compatible */ 265 { "PNP0F0C", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC }, 266 /* MS InPort compatible */ 267 { "PNP0F0D", MOUSE_PROTO_INPORT, MOUSE_MODEL_GENERIC }, 268 /* MS PS/2 compatible */ 269 { "PNP0F0E", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC }, 270 /* MS BallPoint compatible */ 271 { "PNP0F0F", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC }, 272 #if notyet 273 /* TI QuickPort */ 274 { "PNP0F10", MOUSE_PROTO_???, MOUSE_MODEL_GENERIC }, 275 #endif 276 /* MS bus compatible */ 277 { "PNP0F11", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC }, 278 /* Logitech PS/2 */ 279 { "PNP0F12", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC }, 280 /* PS/2 */ 281 { "PNP0F13", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC }, 282 #if notyet 283 /* MS Kids Mouse */ 284 { "PNP0F14", MOUSE_PROTO_???, MOUSE_MODEL_GENERIC }, 285 #endif 286 /* Logitech bus */ 287 { "PNP0F15", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC }, 288 #if notyet 289 /* Logitech SWIFT */ 290 { "PNP0F16", MOUSE_PROTO_???, MOUSE_MODEL_GENERIC }, 291 #endif 292 /* Logitech serial compat */ 293 { "PNP0F17", MOUSE_PROTO_LOGIMOUSEMAN, MOUSE_MODEL_GENERIC }, 294 /* Logitech bus compatible */ 295 { "PNP0F18", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC }, 296 /* Logitech PS/2 compatible */ 297 { "PNP0F19", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC }, 298 #if notyet 299 /* Logitech SWIFT compatible */ 300 { "PNP0F1A", MOUSE_PROTO_???, MOUSE_MODEL_GENERIC }, 301 /* HP Omnibook */ 302 { "PNP0F1B", MOUSE_PROTO_???, MOUSE_MODEL_GENERIC }, 303 /* Compaq LTE TrackBall PS/2 */ 304 { "PNP0F1C", MOUSE_PROTO_???, MOUSE_MODEL_GENERIC }, 305 /* Compaq LTE TrackBall serial */ 306 { "PNP0F1D", MOUSE_PROTO_???, MOUSE_MODEL_GENERIC }, 307 /* MS Kidts Trackball */ 308 { "PNP0F1E", MOUSE_PROTO_???, MOUSE_MODEL_GENERIC }, 309 #endif 310 /* Interlink VersaPad */ 311 { "LNK0001", MOUSE_PROTO_VERSAPAD, MOUSE_MODEL_VERSAPAD }, 312 313 { NULL, MOUSE_PROTO_UNKNOWN, MOUSE_MODEL_GENERIC }, 314 }; 315 316 /* the table must be ordered by MOUSE_PROTO_XXX in mouse.h */ 317 static unsigned short rodentcflags[] = 318 { 319 (CS7 | CREAD | CLOCAL | HUPCL ), /* MicroSoft */ 320 (CS8 | CSTOPB | CREAD | CLOCAL | HUPCL ), /* MouseSystems */ 321 (CS8 | CSTOPB | CREAD | CLOCAL | HUPCL ), /* Logitech */ 322 (CS8 | PARENB | PARODD | CREAD | CLOCAL | HUPCL ), /* MMSeries */ 323 (CS7 | CREAD | CLOCAL | HUPCL ), /* MouseMan */ 324 0, /* Bus */ 325 0, /* InPort */ 326 0, /* PS/2 */ 327 (CS8 | CREAD | CLOCAL | HUPCL ), /* MM HitTablet */ 328 (CS7 | CREAD | CLOCAL | HUPCL ), /* GlidePoint */ 329 (CS7 | CREAD | CLOCAL | HUPCL ), /* IntelliMouse */ 330 (CS7 | CREAD | CLOCAL | HUPCL ), /* Thinking Mouse */ 331 (CS8 | CSTOPB | CREAD | CLOCAL | HUPCL ), /* sysmouse */ 332 (CS7 | CREAD | CLOCAL | HUPCL ), /* X10 MouseRemote */ 333 (CS8 | PARENB | PARODD | CREAD | CLOCAL | HUPCL ), /* kidspad etc. */ 334 (CS8 | CREAD | CLOCAL | HUPCL ), /* VersaPad */ 335 #if notyet 336 (CS8 | CSTOPB | CREAD | CLOCAL | HUPCL ), /* Mariqua */ 337 #endif 338 }; 339 340 static struct rodentparam { 341 int flags; 342 char *portname; /* /dev/XXX */ 343 int rtype; /* MOUSE_PROTO_XXX */ 344 int level; /* operation level: 0 or greater */ 345 int baudrate; 346 int rate; /* report rate */ 347 int resolution; /* MOUSE_RES_XXX or a positive number */ 348 int zmap[4]; /* MOUSE_{X|Y}AXIS or a button number */ 349 int wmode; /* wheel mode button number */ 350 int mfd; /* mouse file descriptor */ 351 int cfd; /* /dev/wsmousectl file descriptor */ 352 int mremsfd; /* mouse remote server file descriptor */ 353 int mremcfd; /* mouse remote client file descriptor */ 354 long clickthreshold; /* double click speed in msec */ 355 long button2timeout; /* 3 button emulation timeout */ 356 mousehw_t hw; /* mouse device hardware information */ 357 mousemode_t mode; /* protocol information */ 358 float accelx; /* Acceleration in the X axis */ 359 float accely; /* Acceleration in the Y axis */ 360 } rodent = { 361 .flags = 0, 362 .portname = NULL, 363 .rtype = MOUSE_PROTO_UNKNOWN, 364 .level = -1, 365 .baudrate = 1200, 366 .rate = 0, 367 .resolution = MOUSE_RES_UNKNOWN, 368 .zmap = { 0, 0, 0, 0 }, 369 .wmode = 0, 370 .mfd = -1, 371 .cfd = -1, 372 .mremsfd = -1, 373 .mremcfd = -1, 374 .clickthreshold = DFLT_CLICKTHRESHOLD, 375 .button2timeout = DFLT_BUTTON2TIMEOUT, 376 .accelx = 1.0, 377 .accely = 1.0, 378 }; 379 380 /* button status */ 381 struct button_state { 382 int count; /* 0: up, 1: single click, 2: double click,... */ 383 struct timeval tv; /* timestamp on the last button event */ 384 }; 385 static struct button_state bstate[MOUSE_MAXBUTTON]; /* button state */ 386 static struct button_state *mstate[MOUSE_MAXBUTTON];/* mapped button st.*/ 387 static struct button_state zstate[4]; /* Z/W axis state */ 388 389 /* state machine for 3 button emulation */ 390 391 #define S0 0 /* start */ 392 #define S1 1 /* button 1 delayed down */ 393 #define S2 2 /* button 3 delayed down */ 394 #define S3 3 /* both buttons down -> button 2 down */ 395 #define S4 4 /* button 1 delayed up */ 396 #define S5 5 /* button 1 down */ 397 #define S6 6 /* button 3 down */ 398 #define S7 7 /* both buttons down */ 399 #define S8 8 /* button 3 delayed up */ 400 #define S9 9 /* button 1 or 3 up after S3 */ 401 402 #define A(b1, b3) (((b1) ? 2 : 0) | ((b3) ? 1 : 0)) 403 #define A_TIMEOUT 4 404 #define S_DELAYED(st) (states[st].s[A_TIMEOUT] != (st)) 405 406 static struct { 407 int s[A_TIMEOUT + 1]; 408 int buttons; 409 int mask; 410 int timeout; 411 } states[10] = { 412 /* S0 */ 413 { { S0, S2, S1, S3, S0 }, 0, ~(MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN), FALSE }, 414 /* S1 */ 415 { { S4, S2, S1, S3, S5 }, 0, ~MOUSE_BUTTON1DOWN, FALSE }, 416 /* S2 */ 417 { { S8, S2, S1, S3, S6 }, 0, ~MOUSE_BUTTON3DOWN, FALSE }, 418 /* S3 */ 419 { { S0, S9, S9, S3, S3 }, MOUSE_BUTTON2DOWN, ~0, FALSE }, 420 /* S4 */ 421 { { S0, S2, S1, S3, S0 }, MOUSE_BUTTON1DOWN, ~0, TRUE }, 422 /* S5 */ 423 { { S0, S2, S5, S7, S5 }, MOUSE_BUTTON1DOWN, ~0, FALSE }, 424 /* S6 */ 425 { { S0, S6, S1, S7, S6 }, MOUSE_BUTTON3DOWN, ~0, FALSE }, 426 /* S7 */ 427 { { S0, S6, S5, S7, S7 }, MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, ~0, FALSE }, 428 /* S8 */ 429 { { S0, S2, S1, S3, S0 }, MOUSE_BUTTON3DOWN, ~0, TRUE }, 430 /* S9 */ 431 { { S0, S9, S9, S3, S9 }, 0, ~(MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN), FALSE }, 432 }; 433 static int mouse_button_state; 434 static struct timeval mouse_button_state_tv; 435 static int mouse_move_delayed; 436 437 static jmp_buf env; 438 439 /* function prototypes */ 440 441 static void moused(const char *); 442 __dead static void hup(int sig); 443 __dead static void cleanup(int sig); 444 __dead static void usage(void); 445 446 static int r_identify(void); 447 static const char *r_if(int type); 448 static const char *r_name(int type); 449 static const char *r_model(int model); 450 static void r_init(void); 451 static int r_protocol(u_char b, mousestatus_t *act); 452 static int r_statetrans(mousestatus_t *a1, mousestatus_t *a2, int trans); 453 static int r_installmap(char *arg); 454 static void r_map(mousestatus_t *act1, mousestatus_t *act2); 455 static void r_timestamp(mousestatus_t *act); 456 static int r_timeout(void); 457 static void setmousespeed(int old, int new, unsigned cflag); 458 459 static int pnpwakeup1(void); 460 static int pnpwakeup2(void); 461 static int pnpgets(char *buf); 462 static int pnpparse(pnpid_t *id, char *buf, int len); 463 static symtab_t *pnpproto(pnpid_t *id); 464 465 static symtab_t *gettoken(symtab_t *tab, const char *s, int len); 466 static const char *gettokenname(symtab_t *tab, int val); 467 468 static void wsev(int ty, int val); 469 470 static int kidspad(u_char rxc, mousestatus_t *act); 471 472 __printflike(1, 2) static void 473 debug(const char *fmt, ...) 474 { 475 va_list ap; 476 477 va_start(ap, fmt); 478 if (dbg && nodaemon) 479 vwarnx(fmt, ap); 480 va_end(ap); 481 } 482 483 __dead __printflike(2, 3) static void 484 logerr(int e, const char *fmt, ...) 485 { 486 va_list ap; 487 488 va_start(ap, fmt); 489 if (background) { 490 int saveerrno = errno; 491 vsyslog(LOG_DAEMON | LOG_ERR, fmt, ap); 492 errno = saveerrno; 493 syslog(LOG_DAEMON | LOG_ERR, "%m"); 494 exit(e); 495 } else 496 verr(e, fmt, ap); 497 va_end(ap); 498 } 499 500 __printflike(1, 2) static void 501 logwarn(const char *fmt, ...) 502 { 503 va_list ap; 504 505 va_start(ap, fmt); 506 if (background) { 507 int saveerrno = errno; 508 vsyslog(LOG_DAEMON | LOG_WARNING, fmt, ap); 509 errno = saveerrno; 510 syslog(LOG_DAEMON | LOG_WARNING, "%m"); 511 } else 512 vwarn(fmt, ap); 513 va_end(ap); 514 } 515 516 __printflike(1, 2) static void 517 logwarnx(const char *fmt, ...) 518 { 519 va_list ap; 520 521 va_start(ap, fmt); 522 if (background) 523 vsyslog(LOG_DAEMON | LOG_WARNING, fmt, ap); 524 else 525 vwarnx(fmt, ap); 526 va_end(ap); 527 } 528 529 int 530 main(int argc, char *argv[]) 531 { 532 int c; 533 int i; 534 int j; 535 const char * volatile ctldev = "/dev/wsmuxctl0"; 536 537 for (i = 0; i < MOUSE_MAXBUTTON; ++i) 538 mstate[i] = &bstate[i]; 539 540 while((c = getopt(argc,argv,"3DE:F:I:PRS:W:a:cdfhi:l:m:p:r:st:w:z:")) != -1) 541 switch(c) { 542 543 case 'W': 544 ctldev = optarg; 545 break; 546 547 case '3': 548 rodent.flags |= Emulate3Button; 549 break; 550 551 case 'E': 552 rodent.button2timeout = atoi(optarg); 553 if ((rodent.button2timeout < 0) || 554 (rodent.button2timeout > MAX_BUTTON2TIMEOUT)) { 555 warnx("invalid argument `%s'", optarg); 556 usage(); 557 } 558 break; 559 560 case 'a': 561 i = sscanf(optarg, "%f,%f", &rodent.accelx, &rodent.accely); 562 if (i == 0) { 563 warnx("invalid acceleration argument '%s'", optarg); 564 usage(); 565 } 566 567 if (i == 1) 568 rodent.accely = rodent.accelx; 569 570 break; 571 572 case 'c': 573 rodent.flags |= ChordMiddle; 574 break; 575 576 case 'd': 577 ++dbg; 578 break; 579 580 case 'f': 581 nodaemon = TRUE; 582 break; 583 584 case 'i': 585 if (strcmp(optarg, "all") == 0) 586 identify = ID_ALL; 587 else if (strcmp(optarg, "port") == 0) 588 identify = ID_PORT; 589 else if (strcmp(optarg, "if") == 0) 590 identify = ID_IF; 591 else if (strcmp(optarg, "type") == 0) 592 identify = ID_TYPE; 593 else if (strcmp(optarg, "model") == 0) 594 identify = ID_MODEL; 595 else { 596 warnx("invalid argument `%s'", optarg); 597 usage(); 598 } 599 nodaemon = TRUE; 600 break; 601 602 case 'l': 603 rodent.level = atoi(optarg); 604 if ((rodent.level < 0) || (rodent.level > 4)) { 605 warnx("invalid argument `%s'", optarg); 606 usage(); 607 } 608 break; 609 610 case 'm': 611 if (!r_installmap(optarg)) { 612 warnx("invalid argument `%s'", optarg); 613 usage(); 614 } 615 break; 616 617 case 'p': 618 rodent.portname = optarg; 619 break; 620 621 case 'r': 622 if (strcmp(optarg, "high") == 0) 623 rodent.resolution = MOUSE_RES_HIGH; 624 else if (strcmp(optarg, "medium-high") == 0) 625 rodent.resolution = MOUSE_RES_HIGH; 626 else if (strcmp(optarg, "medium-low") == 0) 627 rodent.resolution = MOUSE_RES_MEDIUMLOW; 628 else if (strcmp(optarg, "low") == 0) 629 rodent.resolution = MOUSE_RES_LOW; 630 else if (strcmp(optarg, "default") == 0) 631 rodent.resolution = MOUSE_RES_DEFAULT; 632 else { 633 rodent.resolution = atoi(optarg); 634 if (rodent.resolution <= 0) { 635 warnx("invalid argument `%s'", optarg); 636 usage(); 637 } 638 } 639 break; 640 641 case 's': 642 rodent.baudrate = 9600; 643 break; 644 645 case 'w': 646 i = atoi(optarg); 647 if ((i <= 0) || (i > MOUSE_MAXBUTTON)) { 648 warnx("invalid argument `%s'", optarg); 649 usage(); 650 } 651 rodent.wmode = 1 << (i - 1); 652 break; 653 654 case 'z': 655 if (strcmp(optarg, "x") == 0) 656 rodent.zmap[0] = MOUSE_XAXIS; 657 else if (strcmp(optarg, "y") == 0) 658 rodent.zmap[0] = MOUSE_YAXIS; 659 else { 660 i = atoi(optarg); 661 /* 662 * Use button i for negative Z axis movement and 663 * button (i + 1) for positive Z axis movement. 664 */ 665 if ((i <= 0) || (i > MOUSE_MAXBUTTON - 1)) { 666 warnx("invalid argument `%s'", optarg); 667 usage(); 668 } 669 rodent.zmap[0] = i; 670 rodent.zmap[1] = i + 1; 671 debug("optind: %d, optarg: '%s'", optind, optarg); 672 for (j = 1; j < 4; ++j) { 673 if ((optind >= argc) || !isdigit((unsigned char)*argv[optind])) 674 break; 675 i = atoi(argv[optind]); 676 if ((i <= 0) || (i > MOUSE_MAXBUTTON - 1)) { 677 warnx("invalid argument `%s'", argv[optind]); 678 usage(); 679 } 680 rodent.zmap[j] = i; 681 ++optind; 682 } 683 if ((rodent.zmap[2] != 0) && (rodent.zmap[3] == 0)) 684 rodent.zmap[3] = rodent.zmap[2] + 1; 685 } 686 break; 687 688 case 'D': 689 rodent.flags |= ClearDTR; 690 break; 691 692 case 'F': 693 rodent.rate = atoi(optarg); 694 if (rodent.rate <= 0) { 695 warnx("invalid argument `%s'", optarg); 696 usage(); 697 } 698 break; 699 700 case 'I': 701 pidfile = optarg; 702 break; 703 704 case 'P': 705 rodent.flags |= NoPnP; 706 break; 707 708 case 'R': 709 rodent.flags |= ClearRTS; 710 break; 711 712 case 'S': 713 rodent.baudrate = atoi(optarg); 714 if (rodent.baudrate <= 0) { 715 warnx("invalid argument `%s'", optarg); 716 usage(); 717 } 718 debug("rodent baudrate %d", rodent.baudrate); 719 break; 720 721 case 't': 722 if (strcmp(optarg, "auto") == 0) { 723 rodent.rtype = MOUSE_PROTO_UNKNOWN; 724 rodent.flags &= ~NoPnP; 725 rodent.level = -1; 726 break; 727 } 728 for (i = 0; rnames[i]; i++) 729 if (strcmp(optarg, rnames[i]) == 0) { 730 rodent.rtype = i; 731 rodent.flags |= NoPnP; 732 rodent.level = (i == MOUSE_PROTO_SYSMOUSE) ? 1 : 0; 733 break; 734 } 735 if (rnames[i]) 736 break; 737 warnx("no such mouse type `%s'", optarg); 738 usage(); 739 740 case 'h': 741 case '?': 742 default: 743 usage(); 744 } 745 746 /* fix Z axis mapping */ 747 for (i = 0; i < 4; ++i) { 748 if (rodent.zmap[i] > 0) { 749 for (j = 0; j < MOUSE_MAXBUTTON; ++j) { 750 if (mstate[j] == &bstate[rodent.zmap[i] - 1]) 751 mstate[j] = &zstate[i]; 752 } 753 rodent.zmap[i] = 1 << (rodent.zmap[i] - 1); 754 } 755 } 756 757 /* the default port name */ 758 switch(rodent.rtype) { 759 case MOUSE_PROTO_INPORT: 760 /* INPORT and BUS are the same... */ 761 rodent.rtype = MOUSE_PROTO_BUS; 762 /* FALL THROUGH */ 763 default: 764 if (rodent.portname) 765 break; 766 warnx("no port name specified"); 767 usage(); 768 } 769 770 for (;;) { 771 if (setjmp(env) == 0) { 772 signal(SIGHUP, hup); 773 signal(SIGINT , cleanup); 774 signal(SIGQUIT, cleanup); 775 signal(SIGTERM, cleanup); 776 if ((rodent.mfd = open(rodent.portname, O_RDWR | O_NONBLOCK, 0)) 777 == -1) 778 logerr(1, "unable to open %s", rodent.portname); 779 if (r_identify() == MOUSE_PROTO_UNKNOWN) { 780 logwarnx("cannot determine mouse type on %s", rodent.portname); 781 close(rodent.mfd); 782 rodent.mfd = -1; 783 } 784 785 /* print some information */ 786 if (identify != ID_NONE) { 787 if (identify == ID_ALL) 788 printf("%s %s %s %s\n", 789 rodent.portname, r_if(rodent.hw.iftype), 790 r_name(rodent.rtype), r_model(rodent.hw.model)); 791 else if (identify & ID_PORT) 792 printf("%s\n", rodent.portname); 793 else if (identify & ID_IF) 794 printf("%s\n", r_if(rodent.hw.iftype)); 795 else if (identify & ID_TYPE) 796 printf("%s\n", r_name(rodent.rtype)); 797 else if (identify & ID_MODEL) 798 printf("%s\n", r_model(rodent.hw.model)); 799 exit(0); 800 } else { 801 debug("port: %s interface: %s type: %s model: %s", 802 rodent.portname, r_if(rodent.hw.iftype), 803 r_name(rodent.rtype), r_model(rodent.hw.model)); 804 } 805 806 if (rodent.mfd == -1) { 807 /* 808 * We cannot continue because of error. Exit if the 809 * program has not become a daemon. Otherwise, block 810 * until the user corrects the problem and issues SIGHUP. 811 */ 812 if (!background) 813 exit(1); 814 sigpause(0); 815 } 816 817 r_init(); /* call init function */ 818 moused(ctldev); 819 } 820 821 if (rodent.mfd != -1) 822 close(rodent.mfd); 823 if (rodent.cfd != -1) 824 close(rodent.cfd); 825 rodent.mfd = rodent.cfd = -1; 826 } 827 /* NOT REACHED */ 828 829 exit(0); 830 } 831 832 static void 833 wsev(int ty, int val) 834 { 835 struct wscons_event ev; 836 837 ev.type = ty; 838 ev.value = val; 839 if (dbg) 840 printf("wsev: type=%d value=%d\n", ty, val); 841 if (ioctl(rodent.cfd, WSMUXIO_INJECTEVENT, &ev) < 0) 842 logwarn("muxio inject event"); 843 } 844 845 static void 846 moused(const char *wsm) 847 { 848 mousestatus_t action0; /* original mouse action */ 849 mousestatus_t action; /* interrim buffer */ 850 mousestatus_t action2; /* mapped action */ 851 int lastbutton = 0; 852 int button; 853 struct pollfd set[3]; 854 u_char b; 855 FILE *fp; 856 int flags; 857 int c; 858 int i; 859 860 if ((rodent.cfd = open(wsm, O_WRONLY, 0)) == -1) 861 logerr(1, "cannot open %s", wsm); 862 863 if (!nodaemon && !background) { 864 if (daemon(0, 0)) { 865 logerr(1, "failed to become a daemon"); 866 } else { 867 background = TRUE; 868 fp = fopen(pidfile, "w"); 869 if (fp != NULL) { 870 fprintf(fp, "%d\n", getpid()); 871 fclose(fp); 872 } 873 } 874 } 875 876 /* clear mouse data */ 877 bzero(&action0, sizeof(action0)); 878 bzero(&action, sizeof(action)); 879 bzero(&action2, sizeof(action2)); 880 mouse_button_state = S0; 881 gettimeofday(&mouse_button_state_tv, NULL); 882 mouse_move_delayed = 0; 883 for (i = 0; i < MOUSE_MAXBUTTON; ++i) { 884 bstate[i].count = 0; 885 bstate[i].tv = mouse_button_state_tv; 886 } 887 for (i = 0; i < (int)(sizeof(zstate)/sizeof(zstate[0])); ++i) { 888 zstate[i].count = 0; 889 zstate[i].tv = mouse_button_state_tv; 890 } 891 flags = 0; 892 893 /* process mouse data */ 894 for (;;) { 895 896 set[0].fd = rodent.mfd; 897 set[0].events = POLLIN; 898 set[1].fd = rodent.mremsfd; 899 set[1].events = POLLIN; 900 set[2].fd = rodent.mremcfd; 901 set[2].events = POLLIN; 902 903 c = poll(set, 3, (rodent.flags & Emulate3Button) ? 20 : INFTIM); 904 if (c < 0) { /* error */ 905 logwarn("failed to read from mouse"); 906 continue; 907 } else if (c == 0) { /* timeout */ 908 /* assert(rodent.flags & Emulate3Button) */ 909 action0.button = action0.obutton; 910 action0.dx = action0.dy = action0.dz = 0; 911 action0.flags = flags = 0; 912 if (r_timeout() && r_statetrans(&action0, &action, A_TIMEOUT)) { 913 if (dbg > 2) 914 debug("flags:%08x buttons:%08x obuttons:%08x", 915 action.flags, action.button, action.obutton); 916 } else { 917 action0.obutton = action0.button; 918 continue; 919 } 920 } else { 921 #if 0 922 /* MouseRemote client connect/disconnect */ 923 if (set[1].revents & POLLIN) { 924 mremote_clientchg(TRUE); 925 continue; 926 } 927 if (set[2].revents & POLLIN) { 928 mremote_clientchg(FALSE); 929 continue; 930 } 931 #endif 932 /* mouse movement */ 933 if (set[0].revents & POLLIN) { 934 if (read(rodent.mfd, &b, 1) == -1) 935 return; 936 if ((flags = r_protocol(b, &action0)) == 0) 937 continue; 938 r_timestamp(&action0); 939 r_statetrans(&action0, &action, 940 A(action0.button & MOUSE_BUTTON1DOWN, 941 action0.button & MOUSE_BUTTON3DOWN)); 942 debug("flags:%08x buttons:%08x obuttons:%08x", action.flags, 943 action.button, action.obutton); 944 } 945 } 946 action0.obutton = action0.button; 947 flags &= MOUSE_POSCHANGED; 948 flags |= action.obutton ^ action.button; 949 action.flags = flags; 950 951 if (flags) { /* handler detected action */ 952 r_map(&action, &action2); 953 debug("activity : buttons 0x%08x dx %d dy %d dz %d", 954 action2.button, action2.dx, action2.dy, action2.dz); 955 956 if (dbg > 1) 957 printf("buttons=%x x=%d y=%d z=%d\n", action2.button, 958 (int)(action2.dx * rodent.accelx), 959 (int)(action2.dy * rodent.accely), 960 (int)action2.dz); 961 if (action2.dx != 0 && dbg < 2) 962 wsev(WSCONS_EVENT_MOUSE_DELTA_X, action2.dx * rodent.accelx); 963 if (action2.dy != 0 && dbg < 2) 964 wsev(WSCONS_EVENT_MOUSE_DELTA_Y, -action2.dy * rodent.accely); 965 if (action2.dz != 0 && dbg < 2) 966 wsev(WSCONS_EVENT_MOUSE_DELTA_Z, action2.dz); 967 button = lastbutton ^ action2.button; 968 lastbutton = action2.button; 969 printf("diff=%x buts=%x\n", button, lastbutton); 970 for (i = 0; i < 3; i ++) { 971 if ((button & (1<<i)) && dbg < 2) { 972 wsev(lastbutton & (1<<i) ? WSCONS_EVENT_MOUSE_DOWN : 973 WSCONS_EVENT_MOUSE_UP, i); 974 } 975 } 976 977 /* 978 * If the Z axis movement is mapped to a imaginary physical 979 * button, we need to cook up a corresponding button `up' event 980 * after sending a button `down' event. 981 */ 982 if ((rodent.zmap[0] > 0) && (action.dz != 0)) { 983 action.obutton = action.button; 984 action.dx = action.dy = action.dz = 0; 985 r_map(&action, &action2); 986 debug("activity : buttons 0x%08x dx %d dy %d dz %d", 987 action2.button, action2.dx, action2.dy, action2.dz); 988 989 /* XXX emplement this */ 990 #if 0 991 if (extioctl) { 992 r_click(&action2); 993 } else { 994 mouse.operation = MOUSE_ACTION; 995 mouse.u.data.buttons = action2.button; 996 mouse.u.data.x = mouse.u.data.y = mouse.u.data.z = 0; 997 if (dbg < 2) 998 ioctl(rodent.cfd, CONS_MOUSECTL, &mouse); 999 } 1000 #endif 1001 } 1002 } 1003 } 1004 /* NOT REACHED */ 1005 } 1006 1007 static void 1008 hup(int sig) 1009 { 1010 longjmp(env, 1); 1011 } 1012 1013 static void 1014 cleanup(int sig) 1015 { 1016 if (rodent.rtype == MOUSE_PROTO_X10MOUSEREM) 1017 unlink(_PATH_MOUSEREMOTE); 1018 exit(0); 1019 } 1020 1021 /** 1022 ** usage 1023 ** 1024 ** Complain, and free the CPU for more worthy tasks 1025 **/ 1026 static void 1027 usage(void) 1028 { 1029 fprintf(stderr, "%s\n%s\n%s\n%s\n", 1030 "usage: moused [-DRcdfs] [-I file] [-F rate] [-r resolution] [-S baudrate]", 1031 " [-a X[,Y]] [-m N=M] [-w N] [-z N]", 1032 " [-t <mousetype>] [-3 [-E timeout]] -p <port>", 1033 " moused [-d] -i <port|if|type|model|all> -p <port>"); 1034 exit(1); 1035 } 1036 1037 /** 1038 ** Mouse interface code, courtesy of XFree86 3.1.2. 1039 ** 1040 ** Note: Various bits have been trimmed, and in my shortsighted enthusiasm 1041 ** to clean, reformat and rationalise naming, it's quite possible that 1042 ** some things in here have been broken. 1043 ** 1044 ** I hope not 8) 1045 ** 1046 ** The following code is derived from a module marked : 1047 **/ 1048 1049 /* $XConsortium: xf86_Mouse.c,v 1.2 94/10/12 20:33:21 kaleb Exp $ */ 1050 /* $XFree86: xc/programs/Xserver/hw/xfree86/common/xf86_Mouse.c,v 3.2 1995/01/28 1051 17:03:40 dawes Exp $ */ 1052 /* 1053 * 1054 * Copyright 1990,91 by Thomas Roell, Dinkelscherben, Germany. 1055 * Copyright 1993 by David Dawes <dawes (at) physics.su.oz.au> 1056 * 1057 * Permission to use, copy, modify, distribute, and sell this software and its 1058 * documentation for any purpose is hereby granted without fee, provided that 1059 * the above copyright notice appear in all copies and that both that 1060 * copyright notice and this permission notice appear in supporting 1061 * documentation, and that the names of Thomas Roell and David Dawes not be 1062 * used in advertising or publicity pertaining to distribution of the 1063 * software without specific, written prior permission. Thomas Roell 1064 * and David Dawes makes no representations about the suitability of this 1065 * software for any purpose. It is provided "as is" without express or 1066 * implied warranty. 1067 * 1068 * THOMAS ROELL AND DAVID DAWES DISCLAIM ALL WARRANTIES WITH REGARD TO THIS 1069 * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND 1070 * FITNESS, IN NO EVENT SHALL THOMAS ROELL OR DAVID DAWES BE LIABLE FOR ANY 1071 * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER 1072 * RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF 1073 * CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN 1074 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 1075 * 1076 */ 1077 1078 /** 1079 ** GlidePoint support from XFree86 3.2. 1080 ** Derived from the module: 1081 **/ 1082 1083 /* $XFree86: xc/programs/Xserver/hw/xfree86/common/xf86_Mouse.c,v 3.19 1996/10/16 14:40:51 dawes Exp $ */ 1084 /* $XConsortium: xf86_Mouse.c /main/10 1996/01/30 15:16:12 kaleb $ */ 1085 1086 /* the following table must be ordered by MOUSE_PROTO_XXX in mouse.h */ 1087 static unsigned char proto[][7] = { 1088 /* hd_mask hd_id dp_mask dp_id bytes b4_mask b4_id */ 1089 { 0x40, 0x40, 0x40, 0x00, 3, ~0x23, 0x00 }, /* MicroSoft */ 1090 { 0xf8, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* MouseSystems */ 1091 { 0xe0, 0x80, 0x80, 0x00, 3, 0x00, 0xff }, /* Logitech */ 1092 { 0xe0, 0x80, 0x80, 0x00, 3, 0x00, 0xff }, /* MMSeries */ 1093 { 0x40, 0x40, 0x40, 0x00, 3, ~0x33, 0x00 }, /* MouseMan */ 1094 { 0xf8, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* Bus */ 1095 { 0xf8, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* InPort */ 1096 { 0xc0, 0x00, 0x00, 0x00, 3, 0x00, 0xff }, /* PS/2 mouse */ 1097 { 0xe0, 0x80, 0x80, 0x00, 3, 0x00, 0xff }, /* MM HitTablet */ 1098 { 0x40, 0x40, 0x40, 0x00, 3, ~0x33, 0x00 }, /* GlidePoint */ 1099 { 0x40, 0x40, 0x40, 0x00, 3, ~0x3f, 0x00 }, /* IntelliMouse */ 1100 { 0x40, 0x40, 0x40, 0x00, 3, ~0x33, 0x00 }, /* ThinkingMouse */ 1101 { 0xf8, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* sysmouse */ 1102 { 0x40, 0x40, 0x40, 0x00, 3, ~0x23, 0x00 }, /* X10 MouseRem */ 1103 { 0x80, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* KIDSPAD */ 1104 { 0xc3, 0xc0, 0x00, 0x00, 6, 0x00, 0xff }, /* VersaPad */ 1105 #if notyet 1106 { 0xf8, 0x80, 0x00, 0x00, 5, ~0x2f, 0x10 }, /* Mariqua */ 1107 #endif 1108 }; 1109 static unsigned char cur_proto[7]; 1110 1111 static int 1112 r_identify(void) 1113 { 1114 char pnpbuf[256]; /* PnP identifier string may be up to 256 bytes long */ 1115 pnpid_t pnpid; 1116 symtab_t *t; 1117 int len; 1118 1119 rodent.level = 0; 1120 1121 if (rodent.rtype != MOUSE_PROTO_UNKNOWN) 1122 bcopy(proto[rodent.rtype], cur_proto, sizeof(cur_proto)); 1123 rodent.mode.protocol = MOUSE_PROTO_UNKNOWN; 1124 rodent.mode.rate = -1; 1125 rodent.mode.resolution = MOUSE_RES_UNKNOWN; 1126 rodent.mode.accelfactor = 0; 1127 rodent.mode.level = 0; 1128 1129 /* maybe this is an PnP mouse... */ 1130 if (rodent.mode.protocol == MOUSE_PROTO_UNKNOWN) { 1131 1132 if (rodent.flags & NoPnP) 1133 return rodent.rtype; 1134 if (((len = pnpgets(pnpbuf)) <= 0) || !pnpparse(&pnpid, pnpbuf, len)) 1135 return rodent.rtype; 1136 1137 debug("PnP serial mouse: '%*.*s' '%*.*s' '%*.*s'", 1138 pnpid.neisaid, pnpid.neisaid, pnpid.eisaid, 1139 pnpid.ncompat, pnpid.ncompat, pnpid.compat, 1140 pnpid.ndescription, pnpid.ndescription, pnpid.description); 1141 1142 /* we have a valid PnP serial device ID */ 1143 rodent.hw.iftype = MOUSE_IF_SERIAL; 1144 t = pnpproto(&pnpid); 1145 if (t != NULL) { 1146 rodent.mode.protocol = t->val; 1147 rodent.hw.model = t->val2; 1148 } else { 1149 rodent.mode.protocol = MOUSE_PROTO_UNKNOWN; 1150 } 1151 if (rodent.mode.protocol == MOUSE_PROTO_INPORT) 1152 rodent.mode.protocol = MOUSE_PROTO_BUS; 1153 1154 /* make final adjustment */ 1155 if (rodent.mode.protocol != MOUSE_PROTO_UNKNOWN) { 1156 if (rodent.mode.protocol != rodent.rtype) { 1157 /* Hmm, the device doesn't agree with the user... */ 1158 if (rodent.rtype != MOUSE_PROTO_UNKNOWN) 1159 logwarnx("mouse type mismatch (%s != %s), %s is assumed", 1160 r_name(rodent.mode.protocol), r_name(rodent.rtype), 1161 r_name(rodent.mode.protocol)); 1162 rodent.rtype = rodent.mode.protocol; 1163 bcopy(proto[rodent.rtype], cur_proto, sizeof(cur_proto)); 1164 } 1165 } 1166 } 1167 1168 debug("proto params: %02x %02x %02x %02x %d %02x %02x", 1169 cur_proto[0], cur_proto[1], cur_proto[2], cur_proto[3], 1170 cur_proto[4], cur_proto[5], cur_proto[6]); 1171 1172 return rodent.rtype; 1173 } 1174 1175 static const char * 1176 r_if(int iftype) 1177 { 1178 const char *s; 1179 1180 s = gettokenname(rifs, iftype); 1181 return (s == NULL) ? "unknown" : s; 1182 } 1183 1184 static const char * 1185 r_name(int type) 1186 { 1187 return ((type == MOUSE_PROTO_UNKNOWN) 1188 || (type > (int)(sizeof(rnames)/sizeof(rnames[0]) - 1))) 1189 ? "unknown" : rnames[type]; 1190 } 1191 1192 static const char * 1193 r_model(int model) 1194 { 1195 const char *s; 1196 1197 s = gettokenname(rmodels, model); 1198 return (s == NULL) ? "unknown" : s; 1199 } 1200 1201 static void 1202 r_init(void) 1203 { 1204 unsigned char buf[16]; /* scrach buffer */ 1205 struct pollfd set[1]; 1206 const char *s; 1207 char c; 1208 int i; 1209 1210 /** 1211 ** This comment is a little out of context here, but it contains 1212 ** some useful information... 1213 ******************************************************************** 1214 ** 1215 ** The following lines take care of the Logitech MouseMan protocols. 1216 ** 1217 ** NOTE: There are different versions of both MouseMan and TrackMan! 1218 ** Hence I add another protocol P_LOGIMAN, which the user can 1219 ** specify as MouseMan in his XF86Config file. This entry was 1220 ** formerly handled as a special case of P_MS. However, people 1221 ** who don't have the middle button problem, can still specify 1222 ** Microsoft and use P_MS. 1223 ** 1224 ** By default, these mice should use a 3 byte Microsoft protocol 1225 ** plus a 4th byte for the middle button. However, the mouse might 1226 ** have switched to a different protocol before we use it, so I send 1227 ** the proper sequence just in case. 1228 ** 1229 ** NOTE: - all commands to (at least the European) MouseMan have to 1230 ** be sent at 1200 Baud. 1231 ** - each command starts with a '*'. 1232 ** - whenever the MouseMan receives a '*', it will switch back 1233 ** to 1200 Baud. Hence I have to select the desired protocol 1234 ** first, then select the baud rate. 1235 ** 1236 ** The protocols supported by the (European) MouseMan are: 1237 ** - 5 byte packed binary protocol, as with the Mouse Systems 1238 ** mouse. Selected by sequence "*U". 1239 ** - 2 button 3 byte MicroSoft compatible protocol. Selected 1240 ** by sequence "*V". 1241 ** - 3 button 3+1 byte MicroSoft compatible protocol (default). 1242 ** Selected by sequence "*X". 1243 ** 1244 ** The following baud rates are supported: 1245 ** - 1200 Baud (default). Selected by sequence "*n". 1246 ** - 9600 Baud. Selected by sequence "*q". 1247 ** 1248 ** Selecting a sample rate is no longer supported with the MouseMan! 1249 ** Some additional lines in xf86Config.c take care of ill configured 1250 ** baud rates and sample rates. (The user will get an error.) 1251 */ 1252 1253 switch (rodent.rtype) { 1254 1255 case MOUSE_PROTO_LOGI: 1256 /* 1257 * The baud rate selection command must be sent at the current 1258 * baud rate; try all likely settings 1259 */ 1260 setmousespeed(9600, rodent.baudrate, rodentcflags[rodent.rtype]); 1261 setmousespeed(4800, rodent.baudrate, rodentcflags[rodent.rtype]); 1262 setmousespeed(2400, rodent.baudrate, rodentcflags[rodent.rtype]); 1263 setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]); 1264 /* select MM series data format */ 1265 write(rodent.mfd, "S", 1); 1266 setmousespeed(rodent.baudrate, rodent.baudrate, 1267 rodentcflags[MOUSE_PROTO_MM]); 1268 /* select report rate/frequency */ 1269 if (rodent.rate <= 0) write(rodent.mfd, "O", 1); 1270 else if (rodent.rate <= 15) write(rodent.mfd, "J", 1); 1271 else if (rodent.rate <= 27) write(rodent.mfd, "K", 1); 1272 else if (rodent.rate <= 42) write(rodent.mfd, "L", 1); 1273 else if (rodent.rate <= 60) write(rodent.mfd, "R", 1); 1274 else if (rodent.rate <= 85) write(rodent.mfd, "M", 1); 1275 else if (rodent.rate <= 125) write(rodent.mfd, "Q", 1); 1276 else write(rodent.mfd, "N", 1); 1277 break; 1278 1279 case MOUSE_PROTO_LOGIMOUSEMAN: 1280 /* The command must always be sent at 1200 baud */ 1281 setmousespeed(1200, 1200, rodentcflags[rodent.rtype]); 1282 write(rodent.mfd, "*X", 2); 1283 setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]); 1284 break; 1285 1286 case MOUSE_PROTO_HITTAB: 1287 setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]); 1288 1289 /* 1290 * Initialize Hitachi PUMA Plus - Model 1212E to desired settings. 1291 * The tablet must be configured to be in MM mode, NO parity, 1292 * Binary Format. xf86Info.sampleRate controls the sensativity 1293 * of the tablet. We only use this tablet for its 4-button puck 1294 * so we don't run in "Absolute Mode" 1295 */ 1296 write(rodent.mfd, "z8", 2); /* Set Parity = "NONE" */ 1297 usleep(50000); 1298 write(rodent.mfd, "zb", 2); /* Set Format = "Binary" */ 1299 usleep(50000); 1300 write(rodent.mfd, "@", 1); /* Set Report Mode = "Stream" */ 1301 usleep(50000); 1302 write(rodent.mfd, "R", 1); /* Set Output Rate = "45 rps" */ 1303 usleep(50000); 1304 write(rodent.mfd, "I\x20", 2); /* Set Incrememtal Mode "20" */ 1305 usleep(50000); 1306 write(rodent.mfd, "E", 1); /* Set Data Type = "Relative */ 1307 usleep(50000); 1308 1309 /* Resolution is in 'lines per inch' on the Hitachi tablet */ 1310 if (rodent.resolution == MOUSE_RES_LOW) c = 'g'; 1311 else if (rodent.resolution == MOUSE_RES_MEDIUMLOW) c = 'e'; 1312 else if (rodent.resolution == MOUSE_RES_MEDIUMHIGH) c = 'h'; 1313 else if (rodent.resolution == MOUSE_RES_HIGH) c = 'd'; 1314 else if (rodent.resolution <= 40) c = 'g'; 1315 else if (rodent.resolution <= 100) c = 'd'; 1316 else if (rodent.resolution <= 200) c = 'e'; 1317 else if (rodent.resolution <= 500) c = 'h'; 1318 else if (rodent.resolution <= 1000) c = 'j'; 1319 else c = 'd'; 1320 write(rodent.mfd, &c, 1); 1321 usleep(50000); 1322 1323 write(rodent.mfd, "\021", 1); /* Resume DATA output */ 1324 break; 1325 1326 case MOUSE_PROTO_THINK: 1327 setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]); 1328 /* the PnP ID string may be sent again, discard it */ 1329 usleep(200000); 1330 i = FREAD; 1331 ioctl(rodent.mfd, TIOCFLUSH, &i); 1332 /* send the command to initialize the beast */ 1333 set[0].fd = rodent.mfd; 1334 set[0].events = POLLIN; 1335 for (s = "E5E5"; *s; ++s) { 1336 write(rodent.mfd, s, 1); 1337 if (poll(set, 1, INFTIM) <= 0) 1338 break; 1339 read(rodent.mfd, &c, 1); 1340 debug("%c", c); 1341 if (c != *s) 1342 break; 1343 } 1344 break; 1345 1346 case MOUSE_PROTO_MSC: 1347 setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]); 1348 if (rodent.flags & ClearDTR) { 1349 i = TIOCM_DTR; 1350 ioctl(rodent.mfd, TIOCMBIC, &i); 1351 } 1352 if (rodent.flags & ClearRTS) { 1353 i = TIOCM_RTS; 1354 ioctl(rodent.mfd, TIOCMBIC, &i); 1355 } 1356 break; 1357 1358 case MOUSE_PROTO_SYSMOUSE: 1359 if (rodent.hw.iftype == MOUSE_IF_SYSMOUSE) 1360 setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]); 1361 /* fall through */ 1362 1363 case MOUSE_PROTO_BUS: 1364 case MOUSE_PROTO_INPORT: 1365 case MOUSE_PROTO_PS2: 1366 if (rodent.rate >= 0) 1367 rodent.mode.rate = rodent.rate; 1368 if (rodent.resolution != MOUSE_RES_UNKNOWN) 1369 rodent.mode.resolution = rodent.resolution; 1370 #if 0 1371 ioctl(rodent.mfd, MOUSE_SETMODE, &rodent.mode); 1372 #endif 1373 break; 1374 1375 case MOUSE_PROTO_X10MOUSEREM: 1376 #if 0 1377 mremote_serversetup(); 1378 #endif 1379 setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]); 1380 break; 1381 1382 1383 case MOUSE_PROTO_VERSAPAD: 1384 tcsendbreak(rodent.mfd, 0); /* send break for 400 msec */ 1385 i = FREAD; 1386 ioctl(rodent.mfd, TIOCFLUSH, &i); 1387 set[0].fd = rodent.mfd; 1388 set[0].events = POLLIN; 1389 for (i = 0; i < 7; ++i) { 1390 if (poll(set, 1, INFTIM) <= 0) 1391 break; 1392 read(rodent.mfd, &c, 1); 1393 buf[i] = c; 1394 } 1395 debug("%s\n", buf); 1396 if ((buf[0] != 'V') || (buf[1] != 'P')|| (buf[7] != '\r')) 1397 break; 1398 setmousespeed(9600, rodent.baudrate, rodentcflags[rodent.rtype]); 1399 tcsendbreak(rodent.mfd, 0); /* send break for 400 msec again */ 1400 for (i = 0; i < 7; ++i) { 1401 if (poll(set, 1, INFTIM) <= 0) 1402 break; 1403 read(rodent.mfd, &c, 1); 1404 debug("%c", c); 1405 if (c != buf[i]) 1406 break; 1407 } 1408 i = FREAD; 1409 ioctl(rodent.mfd, TIOCFLUSH, &i); 1410 break; 1411 1412 default: 1413 setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]); 1414 break; 1415 } 1416 } 1417 1418 static int 1419 r_protocol(u_char rBuf, mousestatus_t *act) 1420 { 1421 /* MOUSE_MSS_BUTTON?DOWN -> MOUSE_BUTTON?DOWN */ 1422 static int butmapmss[4] = { /* Microsoft, MouseMan, GlidePoint, 1423 IntelliMouse, Thinking Mouse */ 1424 0, 1425 MOUSE_BUTTON3DOWN, 1426 MOUSE_BUTTON1DOWN, 1427 MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, 1428 }; 1429 static int butmapmss2[4] = { /* Microsoft, MouseMan, GlidePoint, 1430 Thinking Mouse */ 1431 0, 1432 MOUSE_BUTTON4DOWN, 1433 MOUSE_BUTTON2DOWN, 1434 MOUSE_BUTTON2DOWN | MOUSE_BUTTON4DOWN, 1435 }; 1436 /* MOUSE_INTELLI_BUTTON?DOWN -> MOUSE_BUTTON?DOWN */ 1437 static int butmapintelli[4] = { /* IntelliMouse, NetMouse, Mie Mouse, 1438 MouseMan+ */ 1439 0, 1440 MOUSE_BUTTON2DOWN, 1441 MOUSE_BUTTON4DOWN, 1442 MOUSE_BUTTON2DOWN | MOUSE_BUTTON4DOWN, 1443 }; 1444 /* MOUSE_MSC_BUTTON?UP -> MOUSE_BUTTON?DOWN */ 1445 static int butmapmsc[8] = { /* MouseSystems, MMSeries, Logitech, 1446 Bus, sysmouse */ 1447 0, 1448 MOUSE_BUTTON3DOWN, 1449 MOUSE_BUTTON2DOWN, 1450 MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN, 1451 MOUSE_BUTTON1DOWN, 1452 MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, 1453 MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN, 1454 MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN 1455 }; 1456 /* MOUSE_PS2_BUTTON?DOWN -> MOUSE_BUTTON?DOWN */ 1457 static int butmapps2[8] = { /* PS/2 */ 1458 0, 1459 MOUSE_BUTTON1DOWN, 1460 MOUSE_BUTTON3DOWN, 1461 MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, 1462 MOUSE_BUTTON2DOWN, 1463 MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN, 1464 MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN, 1465 MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN 1466 }; 1467 /* for Hitachi tablet */ 1468 static int butmaphit[8] = { /* MM HitTablet */ 1469 0, 1470 MOUSE_BUTTON3DOWN, 1471 MOUSE_BUTTON2DOWN, 1472 MOUSE_BUTTON1DOWN, 1473 MOUSE_BUTTON4DOWN, 1474 MOUSE_BUTTON5DOWN, 1475 MOUSE_BUTTON6DOWN, 1476 MOUSE_BUTTON7DOWN, 1477 }; 1478 /* for serial VersaPad */ 1479 static int butmapversa[8] = { /* VersaPad */ 1480 0, 1481 0, 1482 MOUSE_BUTTON3DOWN, 1483 MOUSE_BUTTON3DOWN, 1484 MOUSE_BUTTON1DOWN, 1485 MOUSE_BUTTON1DOWN, 1486 MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, 1487 MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, 1488 }; 1489 /* for PS/2 VersaPad */ 1490 static int butmapversaps2[8] = { /* VersaPad */ 1491 0, 1492 MOUSE_BUTTON3DOWN, 1493 0, 1494 MOUSE_BUTTON3DOWN, 1495 MOUSE_BUTTON1DOWN, 1496 MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, 1497 MOUSE_BUTTON1DOWN, 1498 MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, 1499 }; 1500 static int pBufP = 0; 1501 static unsigned char pBuf[8]; 1502 static int prev_x, prev_y; 1503 static int on = FALSE; 1504 int x, y; 1505 1506 debug("received char 0x%x",(int)rBuf); 1507 if (rodent.rtype == MOUSE_PROTO_KIDSPAD) 1508 return kidspad(rBuf, act); 1509 1510 /* 1511 * Hack for resyncing: We check here for a package that is: 1512 * a) illegal (detected by wrong data-package header) 1513 * b) invalid (0x80 == -128 and that might be wrong for MouseSystems) 1514 * c) bad header-package 1515 * 1516 * NOTE: b) is a violation of the MouseSystems-Protocol, since values of 1517 * -128 are allowed, but since they are very seldom we can easily 1518 * use them as package-header with no button pressed. 1519 * NOTE/2: On a PS/2 mouse any byte is valid as a data byte. Furthermore, 1520 * 0x80 is not valid as a header byte. For a PS/2 mouse we skip 1521 * checking data bytes. 1522 * For resyncing a PS/2 mouse we require the two most significant 1523 * bits in the header byte to be 0. These are the overflow bits, 1524 * and in case of an overflow we actually lose sync. Overflows 1525 * are very rare, however, and we quickly gain sync again after 1526 * an overflow condition. This is the best we can do. (Actually, 1527 * we could use bit 0x08 in the header byte for resyncing, since 1528 * that bit is supposed to be always on, but nobody told 1529 * Microsoft...) 1530 */ 1531 1532 if (pBufP != 0 && rodent.rtype != MOUSE_PROTO_PS2 && 1533 ((rBuf & cur_proto[2]) != cur_proto[3] || rBuf == 0x80)) 1534 { 1535 pBufP = 0; /* skip package */ 1536 } 1537 1538 if (pBufP == 0 && (rBuf & cur_proto[0]) != cur_proto[1]) 1539 return 0; 1540 1541 /* is there an extra data byte? */ 1542 if (pBufP >= cur_proto[4] && (rBuf & cur_proto[0]) != cur_proto[1]) 1543 { 1544 /* 1545 * Hack for Logitech MouseMan Mouse - Middle button 1546 * 1547 * Unfortunately this mouse has variable length packets: the standard 1548 * Microsoft 3 byte packet plus an optional 4th byte whenever the 1549 * middle button status changes. 1550 * 1551 * We have already processed the standard packet with the movement 1552 * and button info. Now post an event message with the old status 1553 * of the left and right buttons and the updated middle button. 1554 */ 1555 1556 /* 1557 * Even worse, different MouseMen and TrackMen differ in the 4th 1558 * byte: some will send 0x00/0x20, others 0x01/0x21, or even 1559 * 0x02/0x22, so I have to strip off the lower bits. 1560 * 1561 * [JCH-96/01/21] 1562 * HACK for ALPS "fourth button". (It's bit 0x10 of the "fourth byte" 1563 * and it is activated by tapping the glidepad with the finger! 8^) 1564 * We map it to bit bit3, and the reverse map in xf86Events just has 1565 * to be extended so that it is identified as Button 4. The lower 1566 * half of the reverse-map may remain unchanged. 1567 */ 1568 1569 /* 1570 * [KY-97/08/03] 1571 * Receive the fourth byte only when preceding three bytes have 1572 * been detected (pBufP >= cur_proto[4]). In the previous 1573 * versions, the test was pBufP == 0; thus, we may have mistakingly 1574 * received a byte even if we didn't see anything preceding 1575 * the byte. 1576 */ 1577 1578 if ((rBuf & cur_proto[5]) != cur_proto[6]) { 1579 pBufP = 0; 1580 return 0; 1581 } 1582 1583 switch (rodent.rtype) { 1584 #if notyet 1585 case MOUSE_PROTO_MARIQUA: 1586 /* 1587 * This mouse has 16! buttons in addition to the standard 1588 * three of them. They return 0x10 though 0x1f in the 1589 * so-called `ten key' mode and 0x30 though 0x3f in the 1590 * `function key' mode. As there are only 31 bits for 1591 * button state (including the standard three), we ignore 1592 * the bit 0x20 and don't distinguish the two modes. 1593 */ 1594 act->dx = act->dy = act->dz = 0; 1595 act->obutton = act->button; 1596 rBuf &= 0x1f; 1597 act->button = (1 << (rBuf - 13)) 1598 | (act->obutton & (MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN)); 1599 /* 1600 * FIXME: this is a button "down" event. There needs to be 1601 * a corresponding button "up" event... XXX 1602 */ 1603 break; 1604 #endif /* notyet */ 1605 1606 /* 1607 * IntelliMouse, NetMouse (including NetMouse Pro) and Mie Mouse 1608 * always send the fourth byte, whereas the fourth byte is 1609 * optional for GlidePoint and ThinkingMouse. The fourth byte 1610 * is also optional for MouseMan+ and FirstMouse+ in their 1611 * native mode. It is always sent if they are in the IntelliMouse 1612 * compatible mode. 1613 */ 1614 case MOUSE_PROTO_INTELLI: /* IntelliMouse, NetMouse, Mie Mouse, 1615 MouseMan+ */ 1616 act->dx = act->dy = 0; 1617 act->dz = (rBuf & 0x08) ? (rBuf & 0x0f) - 16 : (rBuf & 0x0f); 1618 if ((act->dz >= 7) || (act->dz <= -7)) 1619 act->dz = 0; 1620 act->obutton = act->button; 1621 act->button = butmapintelli[(rBuf & MOUSE_MSS_BUTTONS) >> 4] 1622 | (act->obutton & (MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN)); 1623 break; 1624 1625 default: 1626 act->dx = act->dy = act->dz = 0; 1627 act->obutton = act->button; 1628 act->button = butmapmss2[(rBuf & MOUSE_MSS_BUTTONS) >> 4] 1629 | (act->obutton & (MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN)); 1630 break; 1631 } 1632 1633 act->flags = ((act->dx || act->dy || act->dz) ? MOUSE_POSCHANGED : 0) 1634 | (act->obutton ^ act->button); 1635 pBufP = 0; 1636 return act->flags; 1637 } 1638 1639 if (pBufP >= cur_proto[4]) 1640 pBufP = 0; 1641 pBuf[pBufP++] = rBuf; 1642 if (pBufP != cur_proto[4]) 1643 return 0; 1644 1645 /* 1646 * assembly full package 1647 */ 1648 1649 debug("assembled full packet (len %d) %x,%x,%x,%x,%x,%x,%x,%x", 1650 cur_proto[4], 1651 pBuf[0], pBuf[1], pBuf[2], pBuf[3], 1652 pBuf[4], pBuf[5], pBuf[6], pBuf[7]); 1653 1654 act->dz = 0; 1655 act->obutton = act->button; 1656 switch (rodent.rtype) 1657 { 1658 case MOUSE_PROTO_MS: /* Microsoft */ 1659 case MOUSE_PROTO_LOGIMOUSEMAN: /* MouseMan/TrackMan */ 1660 case MOUSE_PROTO_X10MOUSEREM: /* X10 MouseRemote */ 1661 act->button = act->obutton & MOUSE_BUTTON4DOWN; 1662 if (rodent.flags & ChordMiddle) 1663 act->button |= ((pBuf[0] & MOUSE_MSS_BUTTONS) == MOUSE_MSS_BUTTONS) 1664 ? MOUSE_BUTTON2DOWN 1665 : butmapmss[(pBuf[0] & MOUSE_MSS_BUTTONS) >> 4]; 1666 else 1667 act->button |= (act->obutton & MOUSE_BUTTON2DOWN) 1668 | butmapmss[(pBuf[0] & MOUSE_MSS_BUTTONS) >> 4]; 1669 1670 #if 0 1671 /* Send X10 btn events to remote client (ensure -128-+127 range) */ 1672 if ((rodent.rtype == MOUSE_PROTO_X10MOUSEREM) && 1673 ((pBuf[0] & 0xFC) == 0x44) && (pBuf[2] == 0x3F)) { 1674 if (rodent.mremcfd >= 0) { 1675 unsigned char key = (signed char)(((pBuf[0] & 0x03) << 6) | 1676 (pBuf[1] & 0x3F)); 1677 write( rodent.mremcfd, &key, 1 ); 1678 } 1679 return 0; 1680 } 1681 #endif 1682 1683 act->dx = (char)(((pBuf[0] & 0x03) << 6) | (pBuf[1] & 0x3F)); 1684 act->dy = (char)(((pBuf[0] & 0x0C) << 4) | (pBuf[2] & 0x3F)); 1685 break; 1686 1687 case MOUSE_PROTO_GLIDEPOINT: /* GlidePoint */ 1688 case MOUSE_PROTO_THINK: /* ThinkingMouse */ 1689 case MOUSE_PROTO_INTELLI: /* IntelliMouse, NetMouse, Mie Mouse, 1690 MouseMan+ */ 1691 act->button = (act->obutton & (MOUSE_BUTTON2DOWN | MOUSE_BUTTON4DOWN)) 1692 | butmapmss[(pBuf[0] & MOUSE_MSS_BUTTONS) >> 4]; 1693 act->dx = (char)(((pBuf[0] & 0x03) << 6) | (pBuf[1] & 0x3F)); 1694 act->dy = (char)(((pBuf[0] & 0x0C) << 4) | (pBuf[2] & 0x3F)); 1695 break; 1696 1697 case MOUSE_PROTO_MSC: /* MouseSystems Corp */ 1698 #if notyet 1699 case MOUSE_PROTO_MARIQUA: /* Mariqua */ 1700 #endif 1701 act->button = butmapmsc[(~pBuf[0]) & MOUSE_MSC_BUTTONS]; 1702 act->dx = (char)(pBuf[1]) + (char)(pBuf[3]); 1703 act->dy = - ((char)(pBuf[2]) + (char)(pBuf[4])); 1704 break; 1705 1706 case MOUSE_PROTO_HITTAB: /* MM HitTablet */ 1707 act->button = butmaphit[pBuf[0] & 0x07]; 1708 act->dx = (pBuf[0] & MOUSE_MM_XPOSITIVE) ? pBuf[1] : - pBuf[1]; 1709 act->dy = (pBuf[0] & MOUSE_MM_YPOSITIVE) ? - pBuf[2] : pBuf[2]; 1710 break; 1711 1712 case MOUSE_PROTO_MM: /* MM Series */ 1713 case MOUSE_PROTO_LOGI: /* Logitech Mice */ 1714 act->button = butmapmsc[pBuf[0] & MOUSE_MSC_BUTTONS]; 1715 act->dx = (pBuf[0] & MOUSE_MM_XPOSITIVE) ? pBuf[1] : - pBuf[1]; 1716 act->dy = (pBuf[0] & MOUSE_MM_YPOSITIVE) ? - pBuf[2] : pBuf[2]; 1717 break; 1718 1719 case MOUSE_PROTO_VERSAPAD: /* VersaPad */ 1720 act->button = butmapversa[(pBuf[0] & MOUSE_VERSA_BUTTONS) >> 3]; 1721 act->button |= (pBuf[0] & MOUSE_VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0; 1722 act->dx = act->dy = 0; 1723 if (!(pBuf[0] & MOUSE_VERSA_IN_USE)) { 1724 on = FALSE; 1725 break; 1726 } 1727 x = (pBuf[2] << 6) | pBuf[1]; 1728 if (x & 0x800) 1729 x -= 0x1000; 1730 y = (pBuf[4] << 6) | pBuf[3]; 1731 if (y & 0x800) 1732 y -= 0x1000; 1733 if (on) { 1734 act->dx = prev_x - x; 1735 act->dy = prev_y - y; 1736 } else { 1737 on = TRUE; 1738 } 1739 prev_x = x; 1740 prev_y = y; 1741 break; 1742 1743 case MOUSE_PROTO_BUS: /* Bus */ 1744 case MOUSE_PROTO_INPORT: /* InPort */ 1745 act->button = butmapmsc[(~pBuf[0]) & MOUSE_MSC_BUTTONS]; 1746 act->dx = (char)pBuf[1]; 1747 act->dy = - (char)pBuf[2]; 1748 break; 1749 1750 case MOUSE_PROTO_PS2: /* PS/2 */ 1751 act->button = butmapps2[pBuf[0] & MOUSE_PS2_BUTTONS]; 1752 act->dx = (pBuf[0] & MOUSE_PS2_XNEG) ? pBuf[1] - 256 : pBuf[1]; 1753 act->dy = (pBuf[0] & MOUSE_PS2_YNEG) ? -(pBuf[2] - 256) : -pBuf[2]; 1754 /* 1755 * Moused usually operates the psm driver at the operation level 1 1756 * which sends mouse data in MOUSE_PROTO_SYSMOUSE protocol. 1757 * The following code takes effect only when the user explicitly 1758 * requests the level 2 at which wheel movement and additional button 1759 * actions are encoded in model-dependent formats. At the level 0 1760 * the following code is no-op because the psm driver says the model 1761 * is MOUSE_MODEL_GENERIC. 1762 */ 1763 switch (rodent.hw.model) { 1764 case MOUSE_MODEL_EXPLORER: 1765 /* wheel and additional button data is in the fourth byte */ 1766 act->dz = (pBuf[3] & MOUSE_EXPLORER_ZNEG) 1767 ? (pBuf[3] & 0x0f) - 16 : (pBuf[3] & 0x0f); 1768 act->button |= (pBuf[3] & MOUSE_EXPLORER_BUTTON4DOWN) 1769 ? MOUSE_BUTTON4DOWN : 0; 1770 act->button |= (pBuf[3] & MOUSE_EXPLORER_BUTTON5DOWN) 1771 ? MOUSE_BUTTON5DOWN : 0; 1772 break; 1773 case MOUSE_MODEL_INTELLI: 1774 case MOUSE_MODEL_NET: 1775 /* wheel data is in the fourth byte */ 1776 act->dz = (char)pBuf[3]; 1777 if ((act->dz >= 7) || (act->dz <= -7)) 1778 act->dz = 0; 1779 /* some compatible mice may have additional buttons */ 1780 act->button |= (pBuf[0] & MOUSE_PS2INTELLI_BUTTON4DOWN) 1781 ? MOUSE_BUTTON4DOWN : 0; 1782 act->button |= (pBuf[0] & MOUSE_PS2INTELLI_BUTTON5DOWN) 1783 ? MOUSE_BUTTON5DOWN : 0; 1784 break; 1785 case MOUSE_MODEL_MOUSEMANPLUS: 1786 if (((pBuf[0] & MOUSE_PS2PLUS_SYNCMASK) == MOUSE_PS2PLUS_SYNC) 1787 && (abs(act->dx) > 191) 1788 && MOUSE_PS2PLUS_CHECKBITS(pBuf)) { 1789 /* the extended data packet encodes button and wheel events */ 1790 switch (MOUSE_PS2PLUS_PACKET_TYPE(pBuf)) { 1791 case 1: 1792 /* wheel data packet */ 1793 act->dx = act->dy = 0; 1794 if (pBuf[2] & 0x80) { 1795 /* horizontal roller count - ignore it XXX*/ 1796 } else { 1797 /* vertical roller count */ 1798 act->dz = (pBuf[2] & MOUSE_PS2PLUS_ZNEG) 1799 ? (pBuf[2] & 0x0f) - 16 : (pBuf[2] & 0x0f); 1800 } 1801 act->button |= (pBuf[2] & MOUSE_PS2PLUS_BUTTON4DOWN) 1802 ? MOUSE_BUTTON4DOWN : 0; 1803 act->button |= (pBuf[2] & MOUSE_PS2PLUS_BUTTON5DOWN) 1804 ? MOUSE_BUTTON5DOWN : 0; 1805 break; 1806 case 2: 1807 /* this packet type is reserved by Logitech */ 1808 /* 1809 * IBM ScrollPoint Mouse uses this packet type to 1810 * encode both vertical and horizontal scroll movement. 1811 */ 1812 act->dx = act->dy = 0; 1813 /* horizontal roller count */ 1814 if (pBuf[2] & 0x0f) 1815 act->dz = (pBuf[2] & MOUSE_SPOINT_WNEG) ? -2 : 2; 1816 /* vertical roller count */ 1817 if (pBuf[2] & 0xf0) 1818 act->dz = (pBuf[2] & MOUSE_SPOINT_ZNEG) ? -1 : 1; 1819 #if 0 1820 /* vertical roller count */ 1821 act->dz = (pBuf[2] & MOUSE_SPOINT_ZNEG) 1822 ? ((pBuf[2] >> 4) & 0x0f) - 16 1823 : ((pBuf[2] >> 4) & 0x0f); 1824 /* horizontal roller count */ 1825 act->dw = (pBuf[2] & MOUSE_SPOINT_WNEG) 1826 ? (pBuf[2] & 0x0f) - 16 : (pBuf[2] & 0x0f); 1827 #endif 1828 break; 1829 case 0: 1830 /* device type packet - shouldn't happen */ 1831 /* FALL THROUGH */ 1832 default: 1833 act->dx = act->dy = 0; 1834 act->button = act->obutton; 1835 debug("unknown PS2++ packet type %d: 0x%02x 0x%02x 0x%02x\n", 1836 MOUSE_PS2PLUS_PACKET_TYPE(pBuf), 1837 pBuf[0], pBuf[1], pBuf[2]); 1838 break; 1839 } 1840 } else { 1841 /* preserve button states */ 1842 act->button |= act->obutton & MOUSE_EXTBUTTONS; 1843 } 1844 break; 1845 case MOUSE_MODEL_GLIDEPOINT: 1846 /* `tapping' action */ 1847 act->button |= ((pBuf[0] & MOUSE_PS2_TAP)) ? 0 : MOUSE_BUTTON4DOWN; 1848 break; 1849 case MOUSE_MODEL_NETSCROLL: 1850 /* three addtional bytes encode buttons and wheel events */ 1851 act->button |= (pBuf[3] & MOUSE_PS2_BUTTON3DOWN) 1852 ? MOUSE_BUTTON4DOWN : 0; 1853 act->button |= (pBuf[3] & MOUSE_PS2_BUTTON1DOWN) 1854 ? MOUSE_BUTTON5DOWN : 0; 1855 act->dz = (pBuf[3] & MOUSE_PS2_XNEG) ? pBuf[4] - 256 : pBuf[4]; 1856 break; 1857 case MOUSE_MODEL_THINK: 1858 /* the fourth button state in the first byte */ 1859 act->button |= (pBuf[0] & MOUSE_PS2_TAP) ? MOUSE_BUTTON4DOWN : 0; 1860 break; 1861 case MOUSE_MODEL_VERSAPAD: 1862 act->button = butmapversaps2[pBuf[0] & MOUSE_PS2VERSA_BUTTONS]; 1863 act->button |= 1864 (pBuf[0] & MOUSE_PS2VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0; 1865 act->dx = act->dy = 0; 1866 if (!(pBuf[0] & MOUSE_PS2VERSA_IN_USE)) { 1867 on = FALSE; 1868 break; 1869 } 1870 x = ((pBuf[4] << 8) & 0xf00) | pBuf[1]; 1871 if (x & 0x800) 1872 x -= 0x1000; 1873 y = ((pBuf[4] << 4) & 0xf00) | pBuf[2]; 1874 if (y & 0x800) 1875 y -= 0x1000; 1876 if (on) { 1877 act->dx = prev_x - x; 1878 act->dy = prev_y - y; 1879 } else { 1880 on = TRUE; 1881 } 1882 prev_x = x; 1883 prev_y = y; 1884 break; 1885 case MOUSE_MODEL_4D: 1886 act->dx = (pBuf[1] & 0x80) ? pBuf[1] - 256 : pBuf[1]; 1887 act->dy = (pBuf[2] & 0x80) ? -(pBuf[2] - 256) : -pBuf[2]; 1888 switch (pBuf[0] & MOUSE_4D_WHEELBITS) { 1889 case 0x10: 1890 act->dz = 1; 1891 break; 1892 case 0x30: 1893 act->dz = -1; 1894 break; 1895 case 0x40: /* 2nd wheel rolling right XXX */ 1896 act->dz = 2; 1897 break; 1898 case 0xc0: /* 2nd wheel rolling left XXX */ 1899 act->dz = -2; 1900 break; 1901 } 1902 break; 1903 case MOUSE_MODEL_4DPLUS: 1904 if ((act->dx < 16 - 256) && (act->dy > 256 - 16)) { 1905 act->dx = act->dy = 0; 1906 if (pBuf[2] & MOUSE_4DPLUS_BUTTON4DOWN) 1907 act->button |= MOUSE_BUTTON4DOWN; 1908 act->dz = (pBuf[2] & MOUSE_4DPLUS_ZNEG) 1909 ? ((pBuf[2] & 0x07) - 8) : (pBuf[2] & 0x07); 1910 } else { 1911 /* preserve previous button states */ 1912 act->button |= act->obutton & MOUSE_EXTBUTTONS; 1913 } 1914 break; 1915 case MOUSE_MODEL_GENERIC: 1916 default: 1917 break; 1918 } 1919 break; 1920 1921 case MOUSE_PROTO_SYSMOUSE: /* sysmouse */ 1922 act->button = butmapmsc[(~pBuf[0]) & MOUSE_SYS_STDBUTTONS]; 1923 act->dx = (char)(pBuf[1]) + (char)(pBuf[3]); 1924 act->dy = - ((char)(pBuf[2]) + (char)(pBuf[4])); 1925 if (rodent.level == 1) { 1926 act->dz = ((char)(pBuf[5] << 1) + (char)(pBuf[6] << 1))/2; 1927 act->button |= ((~pBuf[7] & MOUSE_SYS_EXTBUTTONS) << 3); 1928 } 1929 break; 1930 1931 default: 1932 return 0; 1933 } 1934 /* 1935 * We don't reset pBufP here yet, as there may be an additional data 1936 * byte in some protocols. See above. 1937 */ 1938 1939 /* has something changed? */ 1940 act->flags = ((act->dx || act->dy || act->dz) ? MOUSE_POSCHANGED : 0) 1941 | (act->obutton ^ act->button); 1942 1943 return act->flags; 1944 } 1945 1946 static int 1947 r_statetrans(mousestatus_t *a1, mousestatus_t *a2, int trans) 1948 { 1949 int changed; 1950 int flags; 1951 1952 a2->dx = a1->dx; 1953 a2->dy = a1->dy; 1954 a2->dz = a1->dz; 1955 a2->obutton = a2->button; 1956 a2->button = a1->button; 1957 a2->flags = a1->flags; 1958 changed = FALSE; 1959 1960 if (rodent.flags & Emulate3Button) { 1961 if (dbg > 2) 1962 debug("state:%d, trans:%d -> state:%d", 1963 mouse_button_state, trans, 1964 states[mouse_button_state].s[trans]); 1965 /* 1966 * Avoid re-ordering button and movement events. While a button 1967 * event is deferred, throw away up to BUTTON2_MAXMOVE movement 1968 * events to allow for mouse jitter. If more movement events 1969 * occur, then complete the deferred button events immediately. 1970 */ 1971 if ((a2->dx != 0 || a2->dy != 0) && 1972 S_DELAYED(states[mouse_button_state].s[trans])) { 1973 if (++mouse_move_delayed > BUTTON2_MAXMOVE) { 1974 mouse_move_delayed = 0; 1975 mouse_button_state = 1976 states[mouse_button_state].s[A_TIMEOUT]; 1977 changed = TRUE; 1978 } else 1979 a2->dx = a2->dy = 0; 1980 } else 1981 mouse_move_delayed = 0; 1982 if (mouse_button_state != states[mouse_button_state].s[trans]) 1983 changed = TRUE; 1984 if (changed) 1985 gettimeofday(&mouse_button_state_tv, NULL); 1986 mouse_button_state = states[mouse_button_state].s[trans]; 1987 a2->button &= 1988 ~(MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN); 1989 a2->button &= states[mouse_button_state].mask; 1990 a2->button |= states[mouse_button_state].buttons; 1991 flags = a2->flags & MOUSE_POSCHANGED; 1992 flags |= a2->obutton ^ a2->button; 1993 if (flags & MOUSE_BUTTON2DOWN) { 1994 a2->flags = flags & MOUSE_BUTTON2DOWN; 1995 r_timestamp(a2); 1996 } 1997 a2->flags = flags; 1998 } 1999 return changed; 2000 } 2001 2002 /* phisical to logical button mapping */ 2003 static int p2l[MOUSE_MAXBUTTON] = { 2004 MOUSE_BUTTON1DOWN, MOUSE_BUTTON2DOWN, MOUSE_BUTTON3DOWN, MOUSE_BUTTON4DOWN, 2005 MOUSE_BUTTON5DOWN, MOUSE_BUTTON6DOWN, MOUSE_BUTTON7DOWN, MOUSE_BUTTON8DOWN, 2006 0x00000100, 0x00000200, 0x00000400, 0x00000800, 2007 0x00001000, 0x00002000, 0x00004000, 0x00008000, 2008 0x00010000, 0x00020000, 0x00040000, 0x00080000, 2009 0x00100000, 0x00200000, 0x00400000, 0x00800000, 2010 0x01000000, 0x02000000, 0x04000000, 0x08000000, 2011 0x10000000, 0x20000000, 0x40000000, 2012 }; 2013 2014 static char * 2015 skipspace(char *s) 2016 { 2017 while(isspace((unsigned char)*s)) 2018 ++s; 2019 return s; 2020 } 2021 2022 static int 2023 r_installmap(char *arg) 2024 { 2025 int pbutton; 2026 int lbutton; 2027 char *s; 2028 2029 while (*arg) { 2030 arg = skipspace(arg); 2031 s = arg; 2032 while (isdigit((unsigned char)*arg)) 2033 ++arg; 2034 arg = skipspace(arg); 2035 if ((arg <= s) || (*arg != '=')) 2036 return FALSE; 2037 lbutton = atoi(s); 2038 2039 arg = skipspace(arg + 1); 2040 s = arg; 2041 while (isdigit((unsigned char)*arg)) 2042 ++arg; 2043 if ((arg <= s) || (!isspace((unsigned char)*arg) && (*arg != '\0'))) 2044 return FALSE; 2045 pbutton = atoi(s); 2046 2047 if ((lbutton <= 0) || (lbutton > MOUSE_MAXBUTTON)) 2048 return FALSE; 2049 if ((pbutton <= 0) || (pbutton > MOUSE_MAXBUTTON)) 2050 return FALSE; 2051 p2l[pbutton - 1] = 1 << (lbutton - 1); 2052 mstate[lbutton - 1] = &bstate[pbutton - 1]; 2053 } 2054 2055 return TRUE; 2056 } 2057 2058 static void 2059 r_map(mousestatus_t *act1, mousestatus_t *act2) 2060 { 2061 register int pb; 2062 register int pbuttons; 2063 int lbuttons; 2064 2065 pbuttons = act1->button; 2066 lbuttons = 0; 2067 2068 act2->obutton = act2->button; 2069 if (pbuttons & rodent.wmode) { 2070 pbuttons &= ~rodent.wmode; 2071 act1->dz = act1->dy; 2072 act1->dx = 0; 2073 act1->dy = 0; 2074 } 2075 act2->dx = act1->dx; 2076 act2->dy = act1->dy; 2077 act2->dz = act1->dz; 2078 2079 switch (rodent.zmap[0]) { 2080 case 0: /* do nothing */ 2081 break; 2082 case MOUSE_XAXIS: 2083 if (act1->dz != 0) { 2084 act2->dx = act1->dz; 2085 act2->dz = 0; 2086 } 2087 break; 2088 case MOUSE_YAXIS: 2089 if (act1->dz != 0) { 2090 act2->dy = act1->dz; 2091 act2->dz = 0; 2092 } 2093 break; 2094 default: /* buttons */ 2095 pbuttons &= ~(rodent.zmap[0] | rodent.zmap[1] 2096 | rodent.zmap[2] | rodent.zmap[3]); 2097 if ((act1->dz < -1) && rodent.zmap[2]) { 2098 pbuttons |= rodent.zmap[2]; 2099 zstate[2].count = 1; 2100 } else if (act1->dz < 0) { 2101 pbuttons |= rodent.zmap[0]; 2102 zstate[0].count = 1; 2103 } else if ((act1->dz > 1) && rodent.zmap[3]) { 2104 pbuttons |= rodent.zmap[3]; 2105 zstate[3].count = 1; 2106 } else if (act1->dz > 0) { 2107 pbuttons |= rodent.zmap[1]; 2108 zstate[1].count = 1; 2109 } 2110 act2->dz = 0; 2111 break; 2112 } 2113 2114 for (pb = 0; (pb < MOUSE_MAXBUTTON) && (pbuttons != 0); ++pb) { 2115 lbuttons |= (pbuttons & 1) ? p2l[pb] : 0; 2116 pbuttons >>= 1; 2117 } 2118 act2->button = lbuttons; 2119 2120 act2->flags = ((act2->dx || act2->dy || act2->dz) ? MOUSE_POSCHANGED : 0) 2121 | (act2->obutton ^ act2->button); 2122 } 2123 2124 static void 2125 r_timestamp(mousestatus_t *act) 2126 { 2127 struct timeval tv; 2128 struct timeval tv1; 2129 struct timeval tv2; 2130 struct timeval tv3; 2131 int button; 2132 int mask; 2133 int i; 2134 2135 mask = act->flags & MOUSE_BUTTONS; 2136 #if 0 2137 if (mask == 0) 2138 return; 2139 #endif 2140 2141 gettimeofday(&tv1, NULL); 2142 2143 /* double click threshold */ 2144 tv2.tv_sec = rodent.clickthreshold/1000; 2145 tv2.tv_usec = (rodent.clickthreshold%1000)*1000; 2146 timersub(&tv1, &tv2, &tv); 2147 debug("tv: %jd %jd", (intmax_t)tv.tv_sec, (intmax_t)tv.tv_usec); 2148 2149 /* 3 button emulation timeout */ 2150 tv2.tv_sec = rodent.button2timeout/1000; 2151 tv2.tv_usec = (rodent.button2timeout%1000)*1000; 2152 timersub(&tv1, &tv2, &tv3); 2153 2154 button = MOUSE_BUTTON1DOWN; 2155 for (i = 0; (i < MOUSE_MAXBUTTON) && (mask != 0); ++i) { 2156 if (mask & 1) { 2157 if (act->button & button) { 2158 /* the button is down */ 2159 debug(" : %jd %jd", 2160 (intmax_t)bstate[i].tv.tv_sec, 2161 (intmax_t)bstate[i].tv.tv_usec); 2162 if (timercmp(&tv, &bstate[i].tv, >)) { 2163 bstate[i].count = 1; 2164 } else { 2165 ++bstate[i].count; 2166 } 2167 bstate[i].tv = tv1; 2168 } else { 2169 /* the button is up */ 2170 bstate[i].tv = tv1; 2171 } 2172 } else { 2173 if (act->button & button) { 2174 /* the button has been down */ 2175 if (timercmp(&tv3, &bstate[i].tv, >)) { 2176 bstate[i].count = 1; 2177 bstate[i].tv = tv1; 2178 act->flags |= button; 2179 debug("button %d timeout", i + 1); 2180 } 2181 } else { 2182 /* the button has been up */ 2183 } 2184 } 2185 button <<= 1; 2186 mask >>= 1; 2187 } 2188 } 2189 2190 static int 2191 r_timeout(void) 2192 { 2193 struct timeval tv; 2194 struct timeval tv1; 2195 struct timeval tv2; 2196 2197 if (states[mouse_button_state].timeout) 2198 return TRUE; 2199 gettimeofday(&tv1, NULL); 2200 tv2.tv_sec = rodent.button2timeout/1000; 2201 tv2.tv_usec = (rodent.button2timeout%1000)*1000; 2202 timersub(&tv1, &tv2, &tv); 2203 return timercmp(&tv, &mouse_button_state_tv, >); 2204 } 2205 2206 /* $XConsortium: posix_tty.c,v 1.3 95/01/05 20:42:55 kaleb Exp $ */ 2207 /* $XFree86: xc/programs/Xserver/hw/xfree86/os-support/shared/posix_tty.c,v 3.4 1995/01/28 17:05:03 dawes Exp $ */ 2208 /* 2209 * Copyright 1993 by David Dawes <dawes (at) physics.su.oz.au> 2210 * 2211 * Permission to use, copy, modify, distribute, and sell this software and its 2212 * documentation for any purpose is hereby granted without fee, provided that 2213 * the above copyright notice appear in all copies and that both that 2214 * copyright notice and this permission notice appear in supporting 2215 * documentation, and that the name of David Dawes 2216 * not be used in advertising or publicity pertaining to distribution of 2217 * the software without specific, written prior permission. 2218 * David Dawes makes no representations about the suitability of this 2219 * software for any purpose. It is provided "as is" without express or 2220 * implied warranty. 2221 * 2222 * DAVID DAWES DISCLAIMS ALL WARRANTIES WITH REGARD TO 2223 * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND 2224 * FITNESS, IN NO EVENT SHALL DAVID DAWES BE LIABLE FOR 2225 * ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER 2226 * RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF 2227 * CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN 2228 * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 2229 * 2230 */ 2231 2232 2233 static void 2234 setmousespeed(int old, int new, unsigned cflag) 2235 { 2236 struct termios tty; 2237 const char *c; 2238 2239 if (tcgetattr(rodent.mfd, &tty) < 0) 2240 { 2241 logwarn("unable to get status of mouse fd"); 2242 return; 2243 } 2244 2245 tty.c_iflag = IGNBRK | IGNPAR; 2246 tty.c_oflag = 0; 2247 tty.c_lflag = 0; 2248 tty.c_cflag = (tcflag_t)cflag; 2249 tty.c_cc[VTIME] = 0; 2250 tty.c_cc[VMIN] = 1; 2251 2252 switch (old) 2253 { 2254 case 9600: 2255 cfsetispeed(&tty, B9600); 2256 cfsetospeed(&tty, B9600); 2257 break; 2258 case 4800: 2259 cfsetispeed(&tty, B4800); 2260 cfsetospeed(&tty, B4800); 2261 break; 2262 case 2400: 2263 cfsetispeed(&tty, B2400); 2264 cfsetospeed(&tty, B2400); 2265 break; 2266 case 1200: 2267 default: 2268 cfsetispeed(&tty, B1200); 2269 cfsetospeed(&tty, B1200); 2270 } 2271 2272 if (tcsetattr(rodent.mfd, TCSADRAIN, &tty) < 0) 2273 { 2274 logwarn("unable to set status of mouse fd"); 2275 return; 2276 } 2277 2278 switch (new) 2279 { 2280 case 9600: 2281 c = "*q"; 2282 cfsetispeed(&tty, B9600); 2283 cfsetospeed(&tty, B9600); 2284 break; 2285 case 4800: 2286 c = "*p"; 2287 cfsetispeed(&tty, B4800); 2288 cfsetospeed(&tty, B4800); 2289 break; 2290 case 2400: 2291 c = "*o"; 2292 cfsetispeed(&tty, B2400); 2293 cfsetospeed(&tty, B2400); 2294 break; 2295 case 1200: 2296 default: 2297 c = "*n"; 2298 cfsetispeed(&tty, B1200); 2299 cfsetospeed(&tty, B1200); 2300 } 2301 2302 if (rodent.rtype == MOUSE_PROTO_LOGIMOUSEMAN 2303 || rodent.rtype == MOUSE_PROTO_LOGI) 2304 { 2305 if (write(rodent.mfd, c, 2) != 2) 2306 { 2307 logwarn("unable to write to mouse fd"); 2308 return; 2309 } 2310 } 2311 usleep(100000); 2312 2313 if (tcsetattr(rodent.mfd, TCSADRAIN, &tty) < 0) 2314 logwarn("unable to set status of mouse fd"); 2315 } 2316 2317 /* 2318 * PnP COM device support 2319 * 2320 * It's a simplistic implementation, but it works :-) 2321 * KY, 31/7/97. 2322 */ 2323 2324 /* 2325 * Try to elicit a PnP ID as described in 2326 * Microsoft, Hayes: "Plug and Play External COM Device Specification, 2327 * rev 1.00", 1995. 2328 * 2329 * The routine does not fully implement the COM Enumerator as par Section 2330 * 2.1 of the document. In particular, we don't have idle state in which 2331 * the driver software monitors the com port for dynamic connection or 2332 * removal of a device at the port, because `moused' simply quits if no 2333 * device is found. 2334 * 2335 * In addition, as PnP COM device enumeration procedure slightly has 2336 * changed since its first publication, devices which follow earlier 2337 * revisions of the above spec. may fail to respond if the rev 1.0 2338 * procedure is used. XXX 2339 */ 2340 static int 2341 pnpwakeup1(void) 2342 { 2343 struct pollfd set[1]; 2344 int i; 2345 2346 /* 2347 * This is the procedure described in rev 1.0 of PnP COM device spec. 2348 * Unfortunately, some devices which comform to earlier revisions of 2349 * the spec gets confused and do not return the ID string... 2350 */ 2351 debug("PnP COM device rev 1.0 probe..."); 2352 2353 /* port initialization (2.1.2) */ 2354 ioctl(rodent.mfd, TIOCMGET, &i); 2355 i |= TIOCM_DTR; /* DTR = 1 */ 2356 i &= ~TIOCM_RTS; /* RTS = 0 */ 2357 ioctl(rodent.mfd, TIOCMSET, &i); 2358 usleep(240000); 2359 2360 /* 2361 * The PnP COM device spec. dictates that the mouse must set DSR 2362 * in response to DTR (by hardware or by software) and that if DSR is 2363 * not asserted, the host computer should think that there is no device 2364 * at this serial port. But some mice just don't do that... 2365 */ 2366 ioctl(rodent.mfd, TIOCMGET, &i); 2367 debug("modem status 0%o", i); 2368 if ((i & TIOCM_DSR) == 0) 2369 return FALSE; 2370 2371 /* port setup, 1st phase (2.1.3) */ 2372 setmousespeed(1200, 1200, (CS7 | CREAD | CLOCAL | HUPCL)); 2373 i = TIOCM_DTR | TIOCM_RTS; /* DTR = 0, RTS = 0 */ 2374 ioctl(rodent.mfd, TIOCMBIC, &i); 2375 usleep(240000); 2376 i = TIOCM_DTR; /* DTR = 1, RTS = 0 */ 2377 ioctl(rodent.mfd, TIOCMBIS, &i); 2378 usleep(240000); 2379 2380 /* wait for response, 1st phase (2.1.4) */ 2381 i = FREAD; 2382 ioctl(rodent.mfd, TIOCFLUSH, &i); 2383 i = TIOCM_RTS; /* DTR = 1, RTS = 1 */ 2384 ioctl(rodent.mfd, TIOCMBIS, &i); 2385 2386 /* try to read something */ 2387 set[0].fd = rodent.mfd; 2388 set[0].events = POLLIN; 2389 if (poll(set, 1, 240) > 0) { 2390 debug("pnpwakeup1(): valid response in first phase."); 2391 return TRUE; 2392 } 2393 2394 /* port setup, 2nd phase (2.1.5) */ 2395 i = TIOCM_DTR | TIOCM_RTS; /* DTR = 0, RTS = 0 */ 2396 ioctl(rodent.mfd, TIOCMBIC, &i); 2397 usleep(240000); 2398 2399 /* wait for response, 2nd phase (2.1.6) */ 2400 i = FREAD; 2401 ioctl(rodent.mfd, TIOCFLUSH, &i); 2402 i = TIOCM_DTR | TIOCM_RTS; /* DTR = 1, RTS = 1 */ 2403 ioctl(rodent.mfd, TIOCMBIS, &i); 2404 2405 /* try to read something */ 2406 if (poll(set, 1, 240) > 0) { 2407 debug("pnpwakeup1(): valid response in second phase."); 2408 return TRUE; 2409 } 2410 2411 return FALSE; 2412 } 2413 2414 static int 2415 pnpwakeup2(void) 2416 { 2417 struct pollfd set[1]; 2418 int i; 2419 2420 /* 2421 * This is a simplified procedure; it simply toggles RTS. 2422 */ 2423 debug("alternate probe..."); 2424 2425 ioctl(rodent.mfd, TIOCMGET, &i); 2426 i |= TIOCM_DTR; /* DTR = 1 */ 2427 i &= ~TIOCM_RTS; /* RTS = 0 */ 2428 ioctl(rodent.mfd, TIOCMSET, &i); 2429 usleep(240000); 2430 2431 setmousespeed(1200, 1200, (CS7 | CREAD | CLOCAL | HUPCL)); 2432 2433 /* wait for response */ 2434 i = FREAD; 2435 ioctl(rodent.mfd, TIOCFLUSH, &i); 2436 i = TIOCM_DTR | TIOCM_RTS; /* DTR = 1, RTS = 1 */ 2437 ioctl(rodent.mfd, TIOCMBIS, &i); 2438 2439 /* try to read something */ 2440 set[0].fd = rodent.mfd; 2441 set[0].events = POLLIN; 2442 if (poll(set, 1, 240) > 0) { 2443 debug("pnpwakeup2(): valid response."); 2444 return TRUE; 2445 } 2446 2447 return FALSE; 2448 } 2449 2450 static int 2451 pnpgets(char *buf) 2452 { 2453 struct pollfd set[1]; 2454 int begin; 2455 int i; 2456 char c; 2457 2458 if (!pnpwakeup1() && !pnpwakeup2()) { 2459 /* 2460 * According to PnP spec, we should set DTR = 1 and RTS = 0 while 2461 * in idle state. But, `moused' shall set DTR = RTS = 1 and proceed, 2462 * assuming there is something at the port even if it didn't 2463 * respond to the PnP enumeration procedure. 2464 */ 2465 i = TIOCM_DTR | TIOCM_RTS; /* DTR = 1, RTS = 1 */ 2466 ioctl(rodent.mfd, TIOCMBIS, &i); 2467 return 0; 2468 } 2469 2470 /* collect PnP COM device ID (2.1.7) */ 2471 begin = -1; 2472 i = 0; 2473 usleep(240000); /* the mouse must send `Begin ID' within 200msec */ 2474 while (read(rodent.mfd, &c, 1) == 1) { 2475 /* we may see "M", or "M3..." before `Begin ID' */ 2476 buf[i++] = c; 2477 if ((c == 0x08) || (c == 0x28)) { /* Begin ID */ 2478 debug("begin-id %02x", c); 2479 begin = i - 1; 2480 break; 2481 } 2482 debug("%c %02x", c, c); 2483 if (i >= 256) 2484 break; 2485 } 2486 if (begin < 0) { 2487 /* we haven't seen `Begin ID' in time... */ 2488 goto connect_idle; 2489 } 2490 2491 ++c; /* make it `End ID' */ 2492 set[0].fd = rodent.mfd; 2493 set[0].events = POLLIN; 2494 for (;;) { 2495 if (poll(set, 1, 240) <= 0) 2496 break; 2497 2498 read(rodent.mfd, &buf[i], 1); 2499 if (buf[i++] == c) /* End ID */ 2500 break; 2501 if (i >= 256) 2502 break; 2503 } 2504 if (begin > 0) { 2505 i -= begin; 2506 bcopy(&buf[begin], &buf[0], i); 2507 } 2508 /* string may not be human readable... */ 2509 debug("len:%d, '%-*.*s'", i, i, i, buf); 2510 2511 if (buf[i - 1] == c) 2512 return i; /* a valid PnP string */ 2513 2514 /* 2515 * According to PnP spec, we should set DTR = 1 and RTS = 0 while 2516 * in idle state. But, `moused' shall leave the modem control lines 2517 * as they are. See above. 2518 */ 2519 connect_idle: 2520 2521 /* we may still have something in the buffer */ 2522 return ((i > 0) ? i : 0); 2523 } 2524 2525 static int 2526 pnpparse(pnpid_t *id, char *buf, int len) 2527 { 2528 char s[3]; 2529 int offset; 2530 int sum = 0; 2531 int i, j; 2532 2533 id->revision = 0; 2534 id->eisaid = ""; 2535 id->serial = NULL; 2536 id->class = NULL; 2537 id->compat = ""; 2538 id->description = ""; 2539 id->neisaid = 0; 2540 id->nserial = 0; 2541 id->nclass = 0; 2542 id->ncompat = 0; 2543 id->ndescription = 0; 2544 2545 if ((buf[0] != 0x28) && (buf[0] != 0x08)) { 2546 /* non-PnP mice */ 2547 switch(buf[0]) { 2548 default: 2549 return FALSE; 2550 case 'M': /* Microsoft */ 2551 id->eisaid = "PNP0F01"; 2552 break; 2553 case 'H': /* MouseSystems */ 2554 id->eisaid = "PNP0F04"; 2555 break; 2556 } 2557 id->neisaid = strlen(id->eisaid); 2558 id->class = "MOUSE"; 2559 id->nclass = strlen(id->class); 2560 debug("non-PnP mouse '%c'", buf[0]); 2561 return TRUE; 2562 } 2563 2564 /* PnP mice */ 2565 offset = 0x28 - buf[0]; 2566 2567 /* calculate checksum */ 2568 for (i = 0; i < len - 3; ++i) { 2569 sum += buf[i]; 2570 buf[i] += offset; 2571 } 2572 sum += buf[len - 1]; 2573 for (; i < len; ++i) 2574 buf[i] += offset; 2575 debug("PnP ID string: '%*.*s'", len, len, buf); 2576 2577 /* revision */ 2578 buf[1] -= offset; 2579 buf[2] -= offset; 2580 id->revision = ((buf[1] & 0x3f) << 6) | (buf[2] & 0x3f); 2581 debug("PnP rev %d.%02d", id->revision / 100, id->revision % 100); 2582 2583 /* EISA vendor and product ID */ 2584 id->eisaid = &buf[3]; 2585 id->neisaid = 7; 2586 2587 /* option strings */ 2588 i = 10; 2589 if (buf[i] == '\\') { 2590 /* device serial # */ 2591 for (j = ++i; i < len; ++i) { 2592 if (buf[i] == '\\') 2593 break; 2594 } 2595 if (i >= len) 2596 i -= 3; 2597 if (i - j == 8) { 2598 id->serial = &buf[j]; 2599 id->nserial = 8; 2600 } 2601 } 2602 if (buf[i] == '\\') { 2603 /* PnP class */ 2604 for (j = ++i; i < len; ++i) { 2605 if (buf[i] == '\\') 2606 break; 2607 } 2608 if (i >= len) 2609 i -= 3; 2610 if (i > j + 1) { 2611 id->class = &buf[j]; 2612 id->nclass = i - j; 2613 } 2614 } 2615 if (buf[i] == '\\') { 2616 /* compatible driver */ 2617 for (j = ++i; i < len; ++i) { 2618 if (buf[i] == '\\') 2619 break; 2620 } 2621 /* 2622 * PnP COM spec prior to v0.96 allowed '*' in this field, 2623 * it's not allowed now; just ignore it. 2624 */ 2625 if (buf[j] == '*') 2626 ++j; 2627 if (i >= len) 2628 i -= 3; 2629 if (i > j + 1) { 2630 id->compat = &buf[j]; 2631 id->ncompat = i - j; 2632 } 2633 } 2634 if (buf[i] == '\\') { 2635 /* product description */ 2636 for (j = ++i; i < len; ++i) { 2637 if (buf[i] == ';') 2638 break; 2639 } 2640 if (i >= len) 2641 i -= 3; 2642 if (i > j + 1) { 2643 id->description = &buf[j]; 2644 id->ndescription = i - j; 2645 } 2646 } 2647 2648 /* checksum exists if there are any optional fields */ 2649 if ((id->nserial > 0) || (id->nclass > 0) 2650 || (id->ncompat > 0) || (id->ndescription > 0)) { 2651 debug("PnP checksum: 0x%X", sum); 2652 snprintf(s, sizeof(s), "%02X", sum & 0x0ff); 2653 if (strncmp(s, &buf[len - 3], 2) != 0) { 2654 #if 0 2655 /* 2656 * I found some mice do not comply with the PnP COM device 2657 * spec regarding checksum... XXX 2658 */ 2659 logwarnx("PnP checksum error", 0); 2660 return FALSE; 2661 #endif 2662 } 2663 } 2664 2665 return TRUE; 2666 } 2667 2668 static symtab_t * 2669 pnpproto(pnpid_t *id) 2670 { 2671 symtab_t *t; 2672 int i, j; 2673 2674 if (id->nclass > 0) 2675 if ( strncmp(id->class, "MOUSE", id->nclass) != 0 && 2676 strncmp(id->class, "TABLET", id->nclass) != 0) 2677 /* this is not a mouse! */ 2678 return NULL; 2679 2680 if (id->neisaid > 0) { 2681 t = gettoken(pnpprod, id->eisaid, id->neisaid); 2682 if (t->val != MOUSE_PROTO_UNKNOWN) 2683 return t; 2684 } 2685 2686 /* 2687 * The 'Compatible drivers' field may contain more than one 2688 * ID separated by ','. 2689 */ 2690 if (id->ncompat <= 0) 2691 return NULL; 2692 for (i = 0; i < id->ncompat; ++i) { 2693 for (j = i; id->compat[i] != ','; ++i) 2694 if (i >= id->ncompat) 2695 break; 2696 if (i > j) { 2697 t = gettoken(pnpprod, id->compat + j, i - j); 2698 if (t->val != MOUSE_PROTO_UNKNOWN) 2699 return t; 2700 } 2701 } 2702 2703 return NULL; 2704 } 2705 2706 /* name/val mapping */ 2707 2708 static symtab_t * 2709 gettoken(symtab_t *tab, const char *s, int len) 2710 { 2711 int i; 2712 2713 for (i = 0; tab[i].name != NULL; ++i) { 2714 if (strncmp(tab[i].name, s, len) == 0) 2715 break; 2716 } 2717 return &tab[i]; 2718 } 2719 2720 static const char * 2721 gettokenname(symtab_t *tab, int val) 2722 { 2723 int i; 2724 2725 for (i = 0; tab[i].name != NULL; ++i) { 2726 if (tab[i].val == val) 2727 return tab[i].name; 2728 } 2729 return NULL; 2730 } 2731 2732 2733 /* 2734 * code to read from the Genius Kidspad tablet. 2735 2736 The tablet responds to the COM PnP protocol 1.0 with EISA-ID KYE0005, 2737 and to pre-pnp probes (RTS toggle) with 'T' (tablet ?) 2738 9600, 8 bit, parity odd. 2739 2740 The tablet puts out 5 bytes. b0 (mask 0xb8, value 0xb8) contains 2741 the proximity, tip and button info: 2742 (byte0 & 0x1) true = tip pressed 2743 (byte0 & 0x2) true = button pressed 2744 (byte0 & 0x40) false = pen in proximity of tablet. 2745 2746 The next 4 bytes are used for coordinates xl, xh, yl, yh (7 bits valid). 2747 2748 Only absolute coordinates are returned, so we use the following approach: 2749 we store the last coordinates sent when the pen went out of the tablet, 2750 2751 2752 * 2753 */ 2754 2755 typedef enum { 2756 S_IDLE, S_PROXY, S_FIRST, S_DOWN, S_UP 2757 } k_status; 2758 2759 static int 2760 kidspad(u_char rxc, mousestatus_t *act) 2761 { 2762 static int buf[5]; 2763 static int buflen = 0, b_prev = 0 , x_prev = -1, y_prev = -1; 2764 static k_status status = S_IDLE; 2765 static struct timeval now; 2766 2767 int x, y; 2768 2769 if (buflen > 0 && (rxc & 0x80) ) { 2770 fprintf(stderr, "invalid code %d 0x%x\n", buflen, rxc); 2771 buflen = 0; 2772 } 2773 if (buflen == 0 && (rxc & 0xb8) != 0xb8 ) { 2774 fprintf(stderr, "invalid code 0 0x%x\n", rxc); 2775 return 0; /* invalid code, no action */ 2776 } 2777 buf[buflen++] = rxc; 2778 if (buflen < 5) 2779 return 0; 2780 2781 buflen = 0; /* for next time... */ 2782 2783 x = buf[1]+128*(buf[2] - 7); 2784 if (x < 0) x = 0; 2785 y = 28*128 - (buf[3] + 128* (buf[4] - 7)); 2786 if (y < 0) y = 0; 2787 2788 x /= 8; 2789 y /= 8; 2790 2791 act->flags = 0; 2792 act->obutton = act->button; 2793 act->dx = act->dy = act->dz = 0; 2794 gettimeofday(&now, NULL); 2795 if ( buf[0] & 0x40 ) /* pen went out of reach */ 2796 status = S_IDLE; 2797 else if (status == S_IDLE) { /* pen is newly near the tablet */ 2798 act->flags |= MOUSE_POSCHANGED; /* force update */ 2799 status = S_PROXY; 2800 x_prev = x; 2801 y_prev = y; 2802 } 2803 act->dx = x - x_prev; 2804 act->dy = y - y_prev; 2805 if (act->dx || act->dy) 2806 act->flags |= MOUSE_POSCHANGED; 2807 x_prev = x; 2808 y_prev = y; 2809 if (b_prev != 0 && b_prev != buf[0]) { /* possibly record button change */ 2810 act->button = 0; 2811 if ( buf[0] & 0x01 ) /* tip pressed */ 2812 act->button |= MOUSE_BUTTON1DOWN; 2813 if ( buf[0] & 0x02 ) /* button pressed */ 2814 act->button |= MOUSE_BUTTON2DOWN; 2815 act->flags |= MOUSE_BUTTONSCHANGED; 2816 } 2817 b_prev = buf[0]; 2818 return act->flags; 2819 } 2820
Indexes created Mon Sep 22 10:09:38 GMT 2025