1 /* $NetBSD: ihavar.h,v 1.13 2008/05/14 13:29:28 tsutsui Exp $ */ 2 3 /*- 4 * Copyright (c) 2001, 2002 Izumi Tsutsui 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 /*- 28 * Device driver for the INI-9XXXU/UW or INIC-940/950 PCI SCSI Controller. 29 * 30 * Written for 386bsd and FreeBSD by 31 * Winston Hung <winstonh (at) initio.com> 32 * 33 * Copyright (c) 1997-1999 Initio Corp. 34 * Copyright (c) 2000 Ken Westerback 35 * All rights reserved. 36 * 37 * Redistribution and use in source and binary forms, with or without 38 * modification, are permitted provided that the following conditions 39 * are met: 40 * 1. Redistributions of source code must retain the above copyright 41 * notice, this list of conditions and the following disclaimer, 42 * without modification, immediately at the beginning of the file. 43 * 2. The name of the author may not be used to endorse or promote products 44 * derived from this software without specific prior written permission. 45 * 46 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 47 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 48 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 49 * IN NO EVENT SHALL THE AUTHOR OR HIS RELATIVES BE LIABLE FOR ANY DIRECT, 50 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 51 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 52 * SERVICES; LOSS OF MIND, USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 53 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 54 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 55 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 56 * THE POSSIBILITY OF SUCH DAMAGE. 57 */ 58 59 /* 60 * Ported to NetBSD by Izumi Tsutsui <tsutsui (at) NetBSD.org> from OpenBSD: 61 * $OpenBSD: iha.h,v 1.2 2001/02/08 17:35:05 krw Exp $ 62 */ 63 64 #define IHA_MAX_SG_ENTRIES (MAXPHYS / PAGE_SIZE + 1) 65 #define IHA_MAX_TARGETS 16 66 #define IHA_MAX_SCB 32 67 #define IHA_MAX_EXTENDED_MSG 4 /* SDTR(3) and WDTR(4) only */ 68 #define IHA_MAX_OFFSET 15 69 70 #define SCSI_CONDITION_MET 0x04 /* SCSI Status codes not defined */ 71 #define SCSI_INTERM_COND_MET 0x14 /* in scsi_all.h */ 72 73 /* 74 * Scatter-Gather Element Structure 75 */ 76 struct iha_sg_element { 77 uint32_t sg_addr; /* Data Pointer */ 78 uint32_t sg_len; /* Data Length */ 79 }; 80 81 #define IHA_SG_SIZE (sizeof(struct iha_sg_element) * IHA_MAX_SG_ENTRIES) 82 83 /* 84 * iha_scb - SCSI Request structure used by the 85 * Tulip (aka inic-940/950). 86 */ 87 88 struct iha_scb { 89 TAILQ_ENTRY(iha_scb) chain; 90 91 bus_dmamap_t dmap; /* maps xs->buf xfer buffer */ 92 93 int status; /* Current status of the SCB */ 94 #define STATUS_QUEUED 0 /* SCB one of Free/Done/Pend */ 95 #define STATUS_RENT 1 /* SCB allocated, not queued */ 96 #define STATUS_SELECT 2 /* SCB being selected */ 97 #define STATUS_BUSY 3 /* SCB I/O is active */ 98 int nextstat; /* Next state function to apply */ 99 int sg_index; /* Scatter/Gather Index */ 100 int sg_max; /* Scatter/Gather # valid entries */ 101 int flags; /* SCB Flags */ 102 #define FLAG_DATAIN 0x00000001 /* Data In */ 103 #define FLAG_DATAOUT 0x00000002 /* Data Out */ 104 #define FLAG_RSENS 0x00000004 /* Request Sense sent */ 105 #define FLAG_SG 0x00000008 /* Scatter/Gather used */ 106 int target; /* Target Id */ 107 int lun; /* Lun */ 108 109 uint32_t bufaddr; /* Data Buffer Physical Addr */ 110 uint32_t buflen; /* Data Allocation Length */ 111 int ha_stat; /* Status of Host Adapter */ 112 #define HOST_OK 0x00 /* OK - operation a success */ 113 #define HOST_TIMED_OUT 0x01 /* Request timed out */ 114 #define HOST_SPERR 0x10 /* SCSI parity error */ 115 #define HOST_SEL_TOUT 0x11 /* Selection Timeout */ 116 #define HOST_DO_DU 0x12 /* Data Over/Underrun */ 117 #define HOST_BAD_PHAS 0x14 /* Unexpected SCSI bus phase */ 118 #define HOST_SCSI_RST 0x1B /* SCSI bus was reset */ 119 #define HOST_DEV_RST 0x1C /* Device was reset */ 120 int ta_stat; /* SCSI Status Byte */ 121 122 struct scsipi_xfer *xs; /* xs this SCB is executing */ 123 struct tcs *tcs; /* tcs for SCB_Target */ 124 struct iha_sg_element *sglist; 125 bus_size_t sgoffset; /* xfer buf offset */ 126 127 int sg_size; /* # of valid entries in sg_list */ 128 uint32_t sg_addr; /* SGList Physical Address */ 129 130 int cmdlen; /* CDB Length */ 131 uint8_t cmd[12]; /* SCSI Command */ 132 133 uint8_t scb_id; /* Identity Message */ 134 uint8_t scb_tagmsg; /* Tag Message */ 135 uint8_t scb_tagid; /* Queue Tag */ 136 }; 137 138 /* 139 * Target Device Control Structure 140 */ 141 struct tcs { 142 int flags; 143 #define FLAG_SCSI_RATE 0x0007 /* Index into iha_rate_tbl[] */ 144 #define FLAG_EN_DISC 0x0008 /* Enable disconnect */ 145 #define FLAG_NO_SYNC 0x0010 /* No sync data transfer */ 146 #define FLAG_NO_WIDE 0x0020 /* No wide data transfer */ 147 #define FLAG_1GIGA 0x0040 /* 255 hd/63 sec (64/32) */ 148 #define FLAG_SPINUP 0x0080 /* Start disk drive */ 149 #define FLAG_WIDE_DONE 0x0100 /* WDTR msg has been sent */ 150 #define FLAG_SYNC_DONE 0x0200 /* SDTR msg has been sent */ 151 #define FLAG_NO_NEG_SYNC (FLAG_NO_SYNC | FLAG_SYNC_DONE) 152 #define FLAG_NO_NEG_WIDE (FLAG_NO_WIDE | FLAG_WIDE_DONE) 153 int period; 154 int offset; 155 int tagcnt; 156 157 struct iha_scb *ntagscb; 158 159 uint8_t syncm; 160 uint8_t sconfig0; 161 }; 162 163 struct iha_softc { 164 device_t sc_dev; 165 166 bus_space_tag_t sc_iot; 167 bus_space_handle_t sc_ioh; 168 169 bus_dma_tag_t sc_dmat; 170 bus_dmamap_t sc_dmamap; 171 172 struct scsipi_adapter sc_adapter; 173 struct scsipi_channel sc_channel; 174 175 int sc_id; 176 void *sc_ih; 177 178 /* 179 * Initio specific fields 180 */ 181 int sc_flags; 182 #define FLAG_EXPECT_DISC 0x01 183 #define FLAG_EXPECT_SELECT 0x02 184 #define FLAG_EXPECT_RESET 0x10 185 #define FLAG_EXPECT_DONE_DISC 0x20 186 int sc_semaph; 187 #define SEMAPH_IN_MAIN 0x00 /* Already in tulip_main */ 188 int sc_phase; /* MSG C/D I/O */ 189 #define PHASE_DATA_OUT 0x00 /* 0 0 0 */ 190 #define PHASE_DATA_IN 0x01 /* 0 0 1 */ 191 #define PHASE_CMD_OUT 0x02 /* 0 1 0 */ 192 #define PHASE_STATUS_IN 0x03 /* 0 1 1 */ 193 #define PHASE_MSG_OUT 0x06 /* 1 1 0 */ 194 #define PHASE_MSG_IN 0x07 /* 1 1 1 */ 195 196 struct iha_scb *sc_scb; /* SCB array */ 197 struct iha_scb *sc_actscb; /* SCB using SCSI bus */ 198 struct iha_sg_element *sc_sglist; 199 200 TAILQ_HEAD(, iha_scb) sc_freescb, 201 sc_pendscb, 202 sc_donescb; 203 204 struct tcs sc_tcs[IHA_MAX_TARGETS]; 205 206 uint8_t sc_msg[IHA_MAX_EXTENDED_MSG]; /* [0] len, [1] Msg Code */ 207 uint8_t sc_sistat; 208 uint8_t sc_status0; 209 uint8_t sc_status1; 210 uint8_t sc_sconf1; 211 }; 212 213 /* 214 * EEPROM for one SCSI Channel 215 */ 216 217 #define EEPROM_SIZE 32 218 #define EEP_LBYTE(x) ((x) & 0xff) 219 #define EEP_HBYTE(x) ((x) >> 8) 220 #define EEP_WORD(l, h) (((h) & 0xff) << 8 | ((l) && 0xff)) 221 #define EEP_WAIT() DELAY(5) 222 223 struct eeprom_adapter { 224 uint16_t config1; /* 0x00 Channel Adapter SCSI Id */ 225 #define CFG_ID_MASK 0x000f 226 #define CFG_ID(cfg) ((cfg) & CFG_ID_MASK) 227 #define CFG_SCSI_RESET 0x0100 /* Reset bus at power up */ 228 #define CFG_EN_PAR 0x0200 /* SCSI parity enable */ 229 #define CFG_ACT_TERM1 0x0400 /* Enable active term 1 */ 230 #define CFG_ACT_TERM2 0x0800 /* Enable active term 2 */ 231 #define CFG_AUTO_TERM 0x1000 /* Enable auto terminator */ 232 #define CFG_EN_PWR 0x8000 /* Enable power mgmt */ 233 #define CFG_DEFAULT (CFG_SCSI_RESET | CFG_AUTO_TERM | CFG_EN_PAR) 234 uint16_t config2; 235 #define CFG_CFG2(x) EEP_LBYTE(x) /* 0x02 Unused Channel Cfg byte 2*/ 236 #define CFG_TARGET(x) EEP_HBYTE(x) /* 0x03 Number of SCSI targets */ 237 /* 0x04 Lower bytes of targ flags*/ 238 uint16_t tflags[IHA_MAX_TARGETS / sizeof(uint16_t)]; 239 #define FLAG_DEFAULT (FLAG_NO_WIDE | FLAG_1GIGA | FLAG_EN_DISC) 240 }; 241 242 /* 243 * Tulip (aka ini-940/950) Serial EEPROM Layout 244 */ 245 struct iha_eeprom { 246 /* ---------- Header ------------------------------------------------*/ 247 uint16_t signature; /* 0x00 NVRAM Signature */ 248 #define EEP_SIGNATURE 0xC925 249 uint16_t revision; 250 #define EEP_SIZE(x) EEP_LBYTE(x) /* 0x02 Size of data structure*/ 251 #define EEP_REV(x) EEP_HBYTE(x) /* 0x03 Rev. of data structure*/ 252 /* ---------- Host Adapter Structure --------------------------------*/ 253 uint16_t model; /* 0x04 Model number */ 254 uint16_t modelinfo; 255 #define EEP_INFO(x) EEP_LBYTE(x) /* 0x06 Model information */ 256 #define EEP_CHAN(x) EEP_HBYTE(x) /* 0x07 Number of SCSI channel*/ 257 uint16_t bioscfg; /* 0x08 BIOS configuration 1 */ 258 #define EEP_BIOSCFG_ENABLE 0x0001 /* BIOS enable */ 259 #define EEP_BIOSCFG_8DRIVE 0x0002 /* Support > 2 drives */ 260 #define EEP_BIOSCFG_REMOVABLE 0x0004 /* Support removable drv */ 261 #define EEP_BIOSCFG_INT19 0x0008 /* Intercept int 19h */ 262 #define EEP_BIOSCFG_BIOSSCAN 0x0010 /* Dynamic BIOS scan */ 263 #define EEP_BIOSCFG_LUNSUPPORT 0x0040 /* Support LUN */ 264 #define EEP_BIOSCFG_DEFAULT EEP_BIOSCFG_ENABLE 265 uint16_t hacfg; /* 0x0a Host adapter config 1 */ 266 #define EEP_HACFG_BOOTIDMASK 0x000F /* Boot ID number */ 267 #define EEP_HACFG_LUNMASK 0x0070 /* Boot LUN number */ 268 #define EEP_HACFG_CHANMASK 0x0080 /* Boot Channel number */ 269 struct eeprom_adapter adapter[2]; /* 0x0c */ 270 uint16_t reserved[5]; /* 0x34 */ 271 272 /* --------- CheckSum -----------------------------------------------*/ 273 uint16_t checksum; /* 0x3E Checksum of NVRam */ 274 }; 275 276 /* Functions used by higher SCSI layers, the kernel, or iha.c and iha_pci.c */ 277 278 int iha_intr(void *); 279 void iha_attach(struct iha_softc *); 280
Indexes created Sat Sep 20 22:09:52 GMT 2025