1 // SPDX-License-Identifier: GPL-2.0+ 2 // 3 // Copyright 2011 Freescale Semiconductor, Inc. 4 // Copyright 2011 Linaro Ltd. 5 6 #include "imx53-pinfunc.h" 7 #include <dt-bindings/clock/imx5-clock.h> 8 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/input/input.h> 10 #include <dt-bindings/interrupt-controller/irq.h> 11 12 / { 13 #address-cells = <1>; 14 #size-cells = <1>; 15 /* 16 * The decompressor and also some bootloaders rely on a 17 * pre-existing /chosen node to be available to insert the 18 * command line and merge other ATAGS info. 19 */ 20 chosen {}; 21 22 aliases { 23 ethernet0 = &fec; 24 gpio0 = &gpio1; 25 gpio1 = &gpio2; 26 gpio2 = &gpio3; 27 gpio3 = &gpio4; 28 gpio4 = &gpio5; 29 gpio5 = &gpio6; 30 gpio6 = &gpio7; 31 i2c0 = &i2c1; 32 i2c1 = &i2c2; 33 i2c2 = &i2c3; 34 ipu0 = &ipu; 35 mmc0 = &esdhc1; 36 mmc1 = &esdhc2; 37 mmc2 = &esdhc3; 38 mmc3 = &esdhc4; 39 serial0 = &uart1; 40 serial1 = &uart2; 41 serial2 = &uart3; 42 serial3 = &uart4; 43 serial4 = &uart5; 44 spi0 = &ecspi1; 45 spi1 = &ecspi2; 46 spi2 = &cspi; 47 }; 48 49 cpus { 50 #address-cells = <1>; 51 #size-cells = <0>; 52 cpu0: cpu@0 { 53 device_type = "cpu"; 54 compatible = "arm,cortex-a8"; 55 reg = <0x0>; 56 clocks = <&clks IMX5_CLK_ARM>; 57 clock-latency = <61036>; 58 voltage-tolerance = <5>; 59 operating-points = < 60 /* kHz */ 61 166666 850000 62 400000 900000 63 800000 1050000 64 1000000 1200000 65 1200000 1300000 66 >; 67 }; 68 }; 69 70 display-subsystem { 71 compatible = "fsl,imx-display-subsystem"; 72 ports = <&ipu_di0>, <&ipu_di1>; 73 }; 74 75 capture_subsystem { 76 compatible = "fsl,imx-capture-subsystem"; 77 ports = <&ipu_csi0>, <&ipu_csi1>; 78 }; 79 80 tzic: tz-interrupt-controller@fffc000 { 81 compatible = "fsl,imx53-tzic", "fsl,tzic"; 82 interrupt-controller; 83 #interrupt-cells = <1>; 84 reg = <0x0fffc000 0x4000>; 85 }; 86 87 clocks { 88 ckil { 89 compatible = "fsl,imx-ckil", "fixed-clock"; 90 #clock-cells = <0>; 91 clock-frequency = <32768>; 92 }; 93 94 ckih1 { 95 compatible = "fsl,imx-ckih1", "fixed-clock"; 96 #clock-cells = <0>; 97 clock-frequency = <22579200>; 98 }; 99 100 ckih2 { 101 compatible = "fsl,imx-ckih2", "fixed-clock"; 102 #clock-cells = <0>; 103 clock-frequency = <0>; 104 }; 105 106 osc { 107 compatible = "fsl,imx-osc", "fixed-clock"; 108 #clock-cells = <0>; 109 clock-frequency = <24000000>; 110 }; 111 }; 112 113 pmu: pmu { 114 compatible = "arm,cortex-a8-pmu"; 115 interrupt-parent = <&tzic>; 116 interrupts = <77>; 117 }; 118 119 usbphy0: usbphy-0 { 120 compatible = "usb-nop-xceiv"; 121 clocks = <&clks IMX5_CLK_USB_PHY1_GATE>; 122 clock-names = "main_clk"; 123 #phy-cells = <0>; 124 status = "okay"; 125 }; 126 127 usbphy1: usbphy-1 { 128 compatible = "usb-nop-xceiv"; 129 clocks = <&clks IMX5_CLK_USB_PHY2_GATE>; 130 clock-names = "main_clk"; 131 #phy-cells = <0>; 132 status = "okay"; 133 }; 134 135 soc { 136 #address-cells = <1>; 137 #size-cells = <1>; 138 compatible = "simple-bus"; 139 interrupt-parent = <&tzic>; 140 ranges; 141 142 sata: sata@10000000 { 143 compatible = "fsl,imx53-ahci"; 144 reg = <0x10000000 0x1000>; 145 interrupts = <28>; 146 clocks = <&clks IMX5_CLK_SATA_GATE>, 147 <&clks IMX5_CLK_SATA_REF>, 148 <&clks IMX5_CLK_AHB>; 149 clock-names = "sata", "sata_ref", "ahb"; 150 status = "disabled"; 151 }; 152 153 ipu: ipu@18000000 { 154 #address-cells = <1>; 155 #size-cells = <0>; 156 compatible = "fsl,imx53-ipu"; 157 reg = <0x18000000 0x08000000>; 158 interrupts = <11 10>; 159 clocks = <&clks IMX5_CLK_IPU_GATE>, 160 <&clks IMX5_CLK_IPU_DI0_GATE>, 161 <&clks IMX5_CLK_IPU_DI1_GATE>; 162 clock-names = "bus", "di0", "di1"; 163 resets = <&src 2>; 164 165 ipu_csi0: port@0 { 166 reg = <0>; 167 168 ipu_csi0_from_parallel_sensor: endpoint { 169 }; 170 }; 171 172 ipu_csi1: port@1 { 173 reg = <1>; 174 175 ipu_csi1_from_parallel_sensor: endpoint { 176 }; 177 }; 178 179 ipu_di0: port@2 { 180 #address-cells = <1>; 181 #size-cells = <0>; 182 reg = <2>; 183 184 ipu_di0_disp0: endpoint@0 { 185 reg = <0>; 186 }; 187 188 ipu_di0_lvds0: endpoint@1 { 189 reg = <1>; 190 remote-endpoint = <&lvds0_in>; 191 }; 192 }; 193 194 ipu_di1: port@3 { 195 #address-cells = <1>; 196 #size-cells = <0>; 197 reg = <3>; 198 199 ipu_di1_disp1: endpoint@0 { 200 reg = <0>; 201 }; 202 203 ipu_di1_lvds1: endpoint@1 { 204 reg = <1>; 205 remote-endpoint = <&lvds1_in>; 206 }; 207 208 ipu_di1_tve: endpoint@2 { 209 reg = <2>; 210 remote-endpoint = <&tve_in>; 211 }; 212 }; 213 }; 214 215 gpu: gpu@30000000 { 216 compatible = "amd,imageon-200.0", "amd,imageon"; 217 reg = <0x30000000 0x20000>; 218 reg-names = "kgsl_3d0_reg_memory"; 219 interrupts = <12>; 220 interrupt-names = "kgsl_3d0_irq"; 221 clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>; 222 clock-names = "core_clk", "mem_iface_clk"; 223 }; 224 225 bus@50000000 { /* AIPS1 */ 226 compatible = "fsl,aips-bus", "simple-bus"; 227 #address-cells = <1>; 228 #size-cells = <1>; 229 reg = <0x50000000 0x10000000>; 230 ranges; 231 232 spba@50000000 { 233 compatible = "fsl,spba-bus", "simple-bus"; 234 #address-cells = <1>; 235 #size-cells = <1>; 236 reg = <0x50000000 0x40000>; 237 ranges; 238 239 esdhc1: mmc@50004000 { 240 compatible = "fsl,imx53-esdhc"; 241 reg = <0x50004000 0x4000>; 242 interrupts = <1>; 243 clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, 244 <&clks IMX5_CLK_DUMMY>, 245 <&clks IMX5_CLK_ESDHC1_PER_GATE>; 246 clock-names = "ipg", "ahb", "per"; 247 bus-width = <4>; 248 status = "disabled"; 249 }; 250 251 esdhc2: mmc@50008000 { 252 compatible = "fsl,imx53-esdhc"; 253 reg = <0x50008000 0x4000>; 254 interrupts = <2>; 255 clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, 256 <&clks IMX5_CLK_DUMMY>, 257 <&clks IMX5_CLK_ESDHC2_PER_GATE>; 258 clock-names = "ipg", "ahb", "per"; 259 bus-width = <4>; 260 status = "disabled"; 261 }; 262 263 uart3: serial@5000c000 { 264 compatible = "fsl,imx53-uart", "fsl,imx21-uart"; 265 reg = <0x5000c000 0x4000>; 266 interrupts = <33>; 267 clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, 268 <&clks IMX5_CLK_UART3_PER_GATE>; 269 clock-names = "ipg", "per"; 270 dmas = <&sdma 42 4 0>, <&sdma 43 4 0>; 271 dma-names = "rx", "tx"; 272 status = "disabled"; 273 }; 274 275 ecspi1: spi@50010000 { 276 #address-cells = <1>; 277 #size-cells = <0>; 278 compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; 279 reg = <0x50010000 0x4000>; 280 interrupts = <36>; 281 clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, 282 <&clks IMX5_CLK_ECSPI1_PER_GATE>; 283 clock-names = "ipg", "per"; 284 status = "disabled"; 285 }; 286 287 ssi2: ssi@50014000 { 288 #sound-dai-cells = <0>; 289 compatible = "fsl,imx53-ssi", 290 "fsl,imx51-ssi", 291 "fsl,imx21-ssi"; 292 reg = <0x50014000 0x4000>; 293 interrupts = <30>; 294 clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>, 295 <&clks IMX5_CLK_SSI2_ROOT_GATE>; 296 clock-names = "ipg", "baud"; 297 dmas = <&sdma 24 1 0>, 298 <&sdma 25 1 0>; 299 dma-names = "rx", "tx"; 300 fsl,fifo-depth = <15>; 301 status = "disabled"; 302 }; 303 304 esdhc3: mmc@50020000 { 305 compatible = "fsl,imx53-esdhc"; 306 reg = <0x50020000 0x4000>; 307 interrupts = <3>; 308 clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, 309 <&clks IMX5_CLK_DUMMY>, 310 <&clks IMX5_CLK_ESDHC3_PER_GATE>; 311 clock-names = "ipg", "ahb", "per"; 312 bus-width = <4>; 313 status = "disabled"; 314 }; 315 316 esdhc4: mmc@50024000 { 317 compatible = "fsl,imx53-esdhc"; 318 reg = <0x50024000 0x4000>; 319 interrupts = <4>; 320 clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, 321 <&clks IMX5_CLK_DUMMY>, 322 <&clks IMX5_CLK_ESDHC4_PER_GATE>; 323 clock-names = "ipg", "ahb", "per"; 324 bus-width = <4>; 325 status = "disabled"; 326 }; 327 }; 328 329 aipstz1: bridge@53f00000 { 330 compatible = "fsl,imx53-aipstz"; 331 reg = <0x53f00000 0x60>; 332 }; 333 334 usbotg: usb@53f80000 { 335 compatible = "fsl,imx53-usb", "fsl,imx27-usb"; 336 reg = <0x53f80000 0x0200>; 337 interrupts = <18>; 338 clocks = <&clks IMX5_CLK_USBOH3_GATE>; 339 fsl,usbmisc = <&usbmisc 0>; 340 fsl,usbphy = <&usbphy0>; 341 status = "disabled"; 342 }; 343 344 usbh1: usb@53f80200 { 345 compatible = "fsl,imx53-usb", "fsl,imx27-usb"; 346 reg = <0x53f80200 0x0200>; 347 interrupts = <14>; 348 clocks = <&clks IMX5_CLK_USBOH3_GATE>; 349 fsl,usbmisc = <&usbmisc 1>; 350 fsl,usbphy = <&usbphy1>; 351 dr_mode = "host"; 352 status = "disabled"; 353 }; 354 355 usbh2: usb@53f80400 { 356 compatible = "fsl,imx53-usb", "fsl,imx27-usb"; 357 reg = <0x53f80400 0x0200>; 358 interrupts = <16>; 359 clocks = <&clks IMX5_CLK_USBOH3_GATE>; 360 fsl,usbmisc = <&usbmisc 2>; 361 dr_mode = "host"; 362 status = "disabled"; 363 }; 364 365 usbh3: usb@53f80600 { 366 compatible = "fsl,imx53-usb", "fsl,imx27-usb"; 367 reg = <0x53f80600 0x0200>; 368 interrupts = <17>; 369 clocks = <&clks IMX5_CLK_USBOH3_GATE>; 370 fsl,usbmisc = <&usbmisc 3>; 371 dr_mode = "host"; 372 status = "disabled"; 373 }; 374 375 usbmisc: usbmisc@53f80800 { 376 #index-cells = <1>; 377 compatible = "fsl,imx53-usbmisc"; 378 reg = <0x53f80800 0x200>; 379 clocks = <&clks IMX5_CLK_USBOH3_GATE>; 380 }; 381 382 gpio1: gpio@53f84000 { 383 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; 384 reg = <0x53f84000 0x4000>; 385 interrupts = <50 51>; 386 gpio-controller; 387 #gpio-cells = <2>; 388 interrupt-controller; 389 #interrupt-cells = <2>; 390 }; 391 392 gpio2: gpio@53f88000 { 393 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; 394 reg = <0x53f88000 0x4000>; 395 interrupts = <52 53>; 396 gpio-controller; 397 #gpio-cells = <2>; 398 interrupt-controller; 399 #interrupt-cells = <2>; 400 }; 401 402 gpio3: gpio@53f8c000 { 403 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; 404 reg = <0x53f8c000 0x4000>; 405 interrupts = <54 55>; 406 gpio-controller; 407 #gpio-cells = <2>; 408 interrupt-controller; 409 #interrupt-cells = <2>; 410 }; 411 412 gpio4: gpio@53f90000 { 413 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; 414 reg = <0x53f90000 0x4000>; 415 interrupts = <56 57>; 416 gpio-controller; 417 #gpio-cells = <2>; 418 interrupt-controller; 419 #interrupt-cells = <2>; 420 }; 421 422 kpp: kpp@53f94000 { 423 compatible = "fsl,imx53-kpp", "fsl,imx21-kpp"; 424 reg = <0x53f94000 0x4000>; 425 interrupts = <60>; 426 clocks = <&clks IMX5_CLK_DUMMY>; 427 status = "disabled"; 428 }; 429 430 wdog1: watchdog@53f98000 { 431 compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; 432 reg = <0x53f98000 0x4000>; 433 interrupts = <58>; 434 clocks = <&clks IMX5_CLK_DUMMY>; 435 }; 436 437 wdog2: watchdog@53f9c000 { 438 compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; 439 reg = <0x53f9c000 0x4000>; 440 interrupts = <59>; 441 clocks = <&clks IMX5_CLK_DUMMY>; 442 status = "disabled"; 443 }; 444 445 gpt: timer@53fa0000 { 446 compatible = "fsl,imx53-gpt", "fsl,imx31-gpt"; 447 reg = <0x53fa0000 0x4000>; 448 interrupts = <39>; 449 clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, 450 <&clks IMX5_CLK_GPT_HF_GATE>; 451 clock-names = "ipg", "per"; 452 }; 453 454 srtc: rtc@53fa4000 { 455 compatible = "fsl,imx53-rtc"; 456 reg = <0x53fa4000 0x4000>; 457 interrupts = <24>; 458 clocks = <&clks IMX5_CLK_SRTC_GATE>; 459 }; 460 461 iomuxc: iomuxc@53fa8000 { 462 compatible = "fsl,imx53-iomuxc"; 463 reg = <0x53fa8000 0x4000>; 464 }; 465 466 gpr: iomuxc-gpr@53fa8000 { 467 compatible = "fsl,imx53-iomuxc-gpr", "syscon"; 468 reg = <0x53fa8000 0xc>; 469 }; 470 471 ldb: ldb@53fa8008 { 472 #address-cells = <1>; 473 #size-cells = <0>; 474 compatible = "fsl,imx53-ldb"; 475 reg = <0x53fa8008 0x4>; 476 gpr = <&gpr>; 477 clocks = <&clks IMX5_CLK_LDB_DI0_SEL>, 478 <&clks IMX5_CLK_LDB_DI1_SEL>, 479 <&clks IMX5_CLK_IPU_DI0_SEL>, 480 <&clks IMX5_CLK_IPU_DI1_SEL>, 481 <&clks IMX5_CLK_LDB_DI0_GATE>, 482 <&clks IMX5_CLK_LDB_DI1_GATE>; 483 clock-names = "di0_pll", "di1_pll", 484 "di0_sel", "di1_sel", 485 "di0", "di1"; 486 status = "disabled"; 487 488 lvds-channel@0 { 489 #address-cells = <1>; 490 #size-cells = <0>; 491 reg = <0>; 492 status = "disabled"; 493 494 port@0 { 495 reg = <0>; 496 497 lvds0_in: endpoint { 498 remote-endpoint = <&ipu_di0_lvds0>; 499 }; 500 }; 501 502 port@2 { 503 reg = <2>; 504 }; 505 }; 506 507 lvds-channel@1 { 508 #address-cells = <1>; 509 #size-cells = <0>; 510 reg = <1>; 511 status = "disabled"; 512 513 port@1 { 514 reg = <1>; 515 516 lvds1_in: endpoint { 517 remote-endpoint = <&ipu_di1_lvds1>; 518 }; 519 }; 520 521 port@2 { 522 reg = <2>; 523 }; 524 }; 525 }; 526 527 pwm1: pwm@53fb4000 { 528 #pwm-cells = <3>; 529 compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; 530 reg = <0x53fb4000 0x4000>; 531 clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, 532 <&clks IMX5_CLK_PWM1_HF_GATE>; 533 clock-names = "ipg", "per"; 534 interrupts = <61>; 535 }; 536 537 pwm2: pwm@53fb8000 { 538 #pwm-cells = <3>; 539 compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; 540 reg = <0x53fb8000 0x4000>; 541 clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, 542 <&clks IMX5_CLK_PWM2_HF_GATE>; 543 clock-names = "ipg", "per"; 544 interrupts = <94>; 545 }; 546 547 uart1: serial@53fbc000 { 548 compatible = "fsl,imx53-uart", "fsl,imx21-uart"; 549 reg = <0x53fbc000 0x4000>; 550 interrupts = <31>; 551 clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, 552 <&clks IMX5_CLK_UART1_PER_GATE>; 553 clock-names = "ipg", "per"; 554 dmas = <&sdma 18 4 0>, <&sdma 19 4 0>; 555 dma-names = "rx", "tx"; 556 status = "disabled"; 557 }; 558 559 uart2: serial@53fc0000 { 560 compatible = "fsl,imx53-uart", "fsl,imx21-uart"; 561 reg = <0x53fc0000 0x4000>; 562 interrupts = <32>; 563 clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, 564 <&clks IMX5_CLK_UART2_PER_GATE>; 565 clock-names = "ipg", "per"; 566 dmas = <&sdma 12 4 0>, <&sdma 13 4 0>; 567 dma-names = "rx", "tx"; 568 status = "disabled"; 569 }; 570 571 can1: can@53fc8000 { 572 compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan"; 573 reg = <0x53fc8000 0x4000>; 574 interrupts = <82>; 575 clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, 576 <&clks IMX5_CLK_CAN1_SERIAL_GATE>; 577 clock-names = "ipg", "per"; 578 status = "disabled"; 579 }; 580 581 can2: can@53fcc000 { 582 compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan"; 583 reg = <0x53fcc000 0x4000>; 584 interrupts = <83>; 585 clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>, 586 <&clks IMX5_CLK_CAN2_SERIAL_GATE>; 587 clock-names = "ipg", "per"; 588 status = "disabled"; 589 }; 590 591 src: reset-controller@53fd0000 { 592 compatible = "fsl,imx53-src", "fsl,imx51-src"; 593 reg = <0x53fd0000 0x4000>; 594 interrupts = <75>; 595 #reset-cells = <1>; 596 }; 597 598 clks: ccm@53fd4000{ 599 compatible = "fsl,imx53-ccm"; 600 reg = <0x53fd4000 0x4000>; 601 interrupts = <0 71 0x04 0 72 0x04>; 602 #clock-cells = <1>; 603 }; 604 605 gpio5: gpio@53fdc000 { 606 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; 607 reg = <0x53fdc000 0x4000>; 608 interrupts = <103 104>; 609 gpio-controller; 610 #gpio-cells = <2>; 611 interrupt-controller; 612 #interrupt-cells = <2>; 613 }; 614 615 gpio6: gpio@53fe0000 { 616 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; 617 reg = <0x53fe0000 0x4000>; 618 interrupts = <105 106>; 619 gpio-controller; 620 #gpio-cells = <2>; 621 interrupt-controller; 622 #interrupt-cells = <2>; 623 }; 624 625 gpio7: gpio@53fe4000 { 626 compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; 627 reg = <0x53fe4000 0x4000>; 628 interrupts = <107 108>; 629 gpio-controller; 630 #gpio-cells = <2>; 631 interrupt-controller; 632 #interrupt-cells = <2>; 633 }; 634 635 i2c3: i2c@53fec000 { 636 #address-cells = <1>; 637 #size-cells = <0>; 638 compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; 639 reg = <0x53fec000 0x4000>; 640 interrupts = <64>; 641 clocks = <&clks IMX5_CLK_I2C3_GATE>; 642 status = "disabled"; 643 }; 644 645 uart4: serial@53ff0000 { 646 compatible = "fsl,imx53-uart", "fsl,imx21-uart"; 647 reg = <0x53ff0000 0x4000>; 648 interrupts = <13>; 649 clocks = <&clks IMX5_CLK_UART4_IPG_GATE>, 650 <&clks IMX5_CLK_UART4_PER_GATE>; 651 clock-names = "ipg", "per"; 652 dmas = <&sdma 2 4 0>, <&sdma 3 4 0>; 653 dma-names = "rx", "tx"; 654 status = "disabled"; 655 }; 656 }; 657 658 bus@60000000 { /* AIPS2 */ 659 compatible = "fsl,aips-bus", "simple-bus"; 660 #address-cells = <1>; 661 #size-cells = <1>; 662 reg = <0x60000000 0x10000000>; 663 ranges; 664 665 aipstz2: bridge@63f00000 { 666 compatible = "fsl,imx53-aipstz"; 667 reg = <0x63f00000 0x60>; 668 }; 669 670 iim: efuse@63f98000 { 671 compatible = "fsl,imx53-iim", "fsl,imx27-iim", "syscon"; 672 reg = <0x63f98000 0x4000>; 673 interrupts = <69>; 674 clocks = <&clks IMX5_CLK_IIM_GATE>; 675 }; 676 677 uart5: serial@63f90000 { 678 compatible = "fsl,imx53-uart", "fsl,imx21-uart"; 679 reg = <0x63f90000 0x4000>; 680 interrupts = <86>; 681 clocks = <&clks IMX5_CLK_UART5_IPG_GATE>, 682 <&clks IMX5_CLK_UART5_PER_GATE>; 683 clock-names = "ipg", "per"; 684 dmas = <&sdma 16 4 0>, <&sdma 17 4 0>; 685 dma-names = "rx", "tx"; 686 status = "disabled"; 687 }; 688 689 tigerp: tigerp@63fa0000 { 690 compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp"; 691 reg = <0x63fa0000 0x28>; 692 }; 693 694 owire: owire@63fa4000 { 695 compatible = "fsl,imx53-owire", "fsl,imx21-owire"; 696 reg = <0x63fa4000 0x4000>; 697 clocks = <&clks IMX5_CLK_OWIRE_GATE>; 698 status = "disabled"; 699 }; 700 701 ecspi2: spi@63fac000 { 702 #address-cells = <1>; 703 #size-cells = <0>; 704 compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; 705 reg = <0x63fac000 0x4000>; 706 interrupts = <37>; 707 clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, 708 <&clks IMX5_CLK_ECSPI2_PER_GATE>; 709 clock-names = "ipg", "per"; 710 status = "disabled"; 711 }; 712 713 sdma: sdma@63fb0000 { 714 compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; 715 reg = <0x63fb0000 0x4000>; 716 interrupts = <6>; 717 clocks = <&clks IMX5_CLK_SDMA_GATE>, 718 <&clks IMX5_CLK_AHB>; 719 clock-names = "ipg", "ahb"; 720 #dma-cells = <3>; 721 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; 722 }; 723 724 cspi: spi@63fc0000 { 725 #address-cells = <1>; 726 #size-cells = <0>; 727 compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; 728 reg = <0x63fc0000 0x4000>; 729 interrupts = <38>; 730 clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, 731 <&clks IMX5_CLK_CSPI_IPG_GATE>; 732 clock-names = "ipg", "per"; 733 status = "disabled"; 734 }; 735 736 i2c2: i2c@63fc4000 { 737 #address-cells = <1>; 738 #size-cells = <0>; 739 compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; 740 reg = <0x63fc4000 0x4000>; 741 interrupts = <63>; 742 clocks = <&clks IMX5_CLK_I2C2_GATE>; 743 status = "disabled"; 744 }; 745 746 i2c1: i2c@63fc8000 { 747 #address-cells = <1>; 748 #size-cells = <0>; 749 compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; 750 reg = <0x63fc8000 0x4000>; 751 interrupts = <62>; 752 clocks = <&clks IMX5_CLK_I2C1_GATE>; 753 status = "disabled"; 754 }; 755 756 ssi1: ssi@63fcc000 { 757 #sound-dai-cells = <0>; 758 compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", 759 "fsl,imx21-ssi"; 760 reg = <0x63fcc000 0x4000>; 761 interrupts = <29>; 762 clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>, 763 <&clks IMX5_CLK_SSI1_ROOT_GATE>; 764 clock-names = "ipg", "baud"; 765 dmas = <&sdma 28 0 0>, 766 <&sdma 29 0 0>; 767 dma-names = "rx", "tx"; 768 fsl,fifo-depth = <15>; 769 status = "disabled"; 770 }; 771 772 audmux: audmux@63fd0000 { 773 compatible = "fsl,imx53-audmux", "fsl,imx31-audmux"; 774 reg = <0x63fd0000 0x4000>; 775 status = "disabled"; 776 }; 777 778 nfc: nand@63fdb000 { 779 compatible = "fsl,imx53-nand"; 780 reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>; 781 interrupts = <8>; 782 clocks = <&clks IMX5_CLK_NFC_GATE>; 783 status = "disabled"; 784 }; 785 786 ssi3: ssi@63fe8000 { 787 #sound-dai-cells = <0>; 788 compatible = "fsl,imx53-ssi", "fsl,imx51-ssi", 789 "fsl,imx21-ssi"; 790 reg = <0x63fe8000 0x4000>; 791 interrupts = <96>; 792 clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>, 793 <&clks IMX5_CLK_SSI3_ROOT_GATE>; 794 clock-names = "ipg", "baud"; 795 dmas = <&sdma 46 0 0>, 796 <&sdma 47 0 0>; 797 dma-names = "rx", "tx"; 798 fsl,fifo-depth = <15>; 799 status = "disabled"; 800 }; 801 802 fec: ethernet@63fec000 { 803 compatible = "fsl,imx53-fec", "fsl,imx25-fec"; 804 reg = <0x63fec000 0x4000>; 805 interrupts = <87>; 806 clocks = <&clks IMX5_CLK_FEC_GATE>, 807 <&clks IMX5_CLK_FEC_GATE>, 808 <&clks IMX5_CLK_FEC_GATE>; 809 clock-names = "ipg", "ahb", "ptp"; 810 status = "disabled"; 811 }; 812 813 tve: tve@63ff0000 { 814 compatible = "fsl,imx53-tve"; 815 reg = <0x63ff0000 0x1000>; 816 interrupts = <92>; 817 clocks = <&clks IMX5_CLK_TVE_GATE>, 818 <&clks IMX5_CLK_IPU_DI1_SEL>; 819 clock-names = "tve", "di_sel"; 820 status = "disabled"; 821 822 port { 823 tve_in: endpoint { 824 remote-endpoint = <&ipu_di1_tve>; 825 }; 826 }; 827 }; 828 829 vpu: vpu@63ff4000 { 830 compatible = "fsl,imx53-vpu", "cnm,coda7541"; 831 reg = <0x63ff4000 0x1000>; 832 interrupts = <9>; 833 clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, 834 <&clks IMX5_CLK_VPU_GATE>; 835 clock-names = "per", "ahb"; 836 resets = <&src 1>; 837 iram = <&ocram>; 838 }; 839 840 sahara: crypto@63ff8000 { 841 compatible = "fsl,imx53-sahara"; 842 reg = <0x63ff8000 0x4000>; 843 interrupts = <19 20>; 844 clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>, 845 <&clks IMX5_CLK_SAHARA_IPG_GATE>; 846 clock-names = "ipg", "ahb"; 847 }; 848 }; 849 850 ocram: sram@f8000000 { 851 compatible = "mmio-sram"; 852 reg = <0xf8000000 0x20000>; 853 clocks = <&clks IMX5_CLK_OCRAM>; 854 }; 855 }; 856 }; 857
Indexes created Wed Oct 01 15:09:59 GMT 2025