1 /* $NetBSD: adwlib.h,v 1.23 2019/12/15 16:48:27 tsutsui Exp $ */ 2 3 /* 4 * Definitions for low level routines and data structures 5 * for the Advanced Systems Inc. SCSI controllers chips. 6 * 7 * Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc. 8 * All rights reserved. 9 * 10 * Author: Baldassare Dante Profeta <dante (at) mclink.it> 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 23 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 24 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 31 * POSSIBILITY OF SUCH DAMAGE. 32 */ 33 /* 34 * Ported from: 35 */ 36 /* 37 * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters 38 * 39 * Copyright (c) 1995-2000 Advanced System Products, Inc. 40 * All Rights Reserved. 41 * 42 * Redistribution and use in source and binary forms, with or without 43 * modification, are permitted provided that redistributions of source 44 * code retain the above copyright notice and this comment without 45 * modification. 46 */ 47 48 #ifndef _ADVANSYS_WIDE_LIBRARY_H_ 49 #define _ADVANSYS_WIDE_LIBRARY_H_ 50 51 52 /* 53 * --- Adw Library Constants and Macros 54 */ 55 56 #define ADW_LIB_VERSION_MAJOR 5 57 #define ADW_LIB_VERSION_MINOR 8 58 59 60 /* If the result wraps when calculating tenths, return 0. */ 61 #define ADW_TENTHS(num, den) \ 62 (((10 * ((num)/(den))) > (((num) * 10)/(den))) ? \ 63 0 : ((((num) * 10)/(den)) - (10 * ((num)/(den))))) 64 65 66 /* 67 * Define Adw Reset Hold Time grater than 25 uSec. 68 * See AdwResetSCSIBus() for more info. 69 */ 70 #define ASC_SCSI_RESET_HOLD_TIME_US 60 71 72 /* 73 * Define Adw EEPROM constants. 74 */ 75 76 #define ASC_EEP_DVC_CFG_BEGIN (0x00) 77 #define ASC_EEP_DVC_CFG_END (0x15) 78 #define ASC_EEP_DVC_CTL_BEGIN (0x16) /* location of OEM name */ 79 #define ASC_EEP_MAX_WORD_ADDR (0x1E) 80 81 #define ASC_EEP_DELAY_MS 100 82 83 /* 84 * EEPROM bits reference by the RISC after initialization. 85 */ 86 #define ADW_EEPROM_BIG_ENDIAN 0x8000 /* EEPROM Bit 15 */ 87 #define ADW_EEPROM_BIOS_ENABLE 0x4000 /* EEPROM Bit 14 */ 88 #define ADW_EEPROM_TERM_POL 0x2000 /* EEPROM Bit 13 */ 89 90 /* 91 * EEPROM configuration format 92 * 93 * Field naming convention: 94 * 95 * *_enable indicates the field enables or disables the feature. The 96 * value is never reset. 97 * 98 * *_able indicates both whether a feature should be enabled or disabled 99 * and whether a device isi capable of the feature. At initialization 100 * this field may be set, but later if a device is found to be incapable 101 * of the feature, the field is cleared. 102 * 103 * Default values are maintained in the structure Default_EEPROM_Config. 104 */ 105 #define ADV_EEPROM_BIG_ENDIAN 0x8000 /* EEPROM Bit 15 */ 106 #define ADV_EEPROM_BIOS_ENABLE 0x4000 /* EEPROM Bit 14 */ 107 /* 108 * For the ASC3550 Bit 13 is Termination Polarity control bit. 109 * For later ICs Bit 13 controls whether the CIS (Card Information 110 * Service Section) is loaded from EEPROM. 111 */ 112 #define ADV_EEPROM_TERM_POL 0x2000 /* EEPROM Bit 13 */ 113 #define ADV_EEPROM_CIS_LD 0x2000 /* EEPROM Bit 13 */ 114 115 /* 116 * ASC38C1600 Bit 11 117 * 118 * If EEPROM Bit 11 is 0 for Function 0, then Function 0 will specify 119 * INT A in the PCI Configuration Space Int Pin field. If it is 1, then 120 * Function 0 will specify INT B. 121 * 122 * If EEPROM Bit 11 is 0 for Function 1, then Function 1 will specify 123 * INT B in the PCI Configuration Space Int Pin field. If it is 1, then 124 * Function 1 will specify INT A. 125 */ 126 #define ADW_EEPROM_INTAB 0x0800 /* EEPROM Bit 11 */ 127 128 typedef struct adw_eeprom 129 { 130 /* Word Offset, Description */ 131 132 u_int16_t cfg_lsw; /* 00 power up initialization */ 133 /* bit 13 set - Term Polarity Control */ 134 /* bit 14 set - BIOS Enable */ 135 /* bit 15 set - Big Endian Mode */ 136 u_int16_t cfg_msw; /* 01 unused */ 137 u_int16_t disc_enable; /* 02 disconnect enable */ 138 u_int16_t wdtr_able; /* 03 Wide DTR able */ 139 union { 140 u_int16_t sdtr_able; /* 04 Synchronous DTR able */ 141 u_int16_t sdtr_speed1; /* 04 SDTR Speed TID 0-3 */ 142 } sdtr1; 143 u_int16_t start_motor; /* 05 send start up motor */ 144 u_int16_t tagqng_able; /* 06 tag queuing able */ 145 u_int16_t bios_scan; /* 07 BIOS device control */ 146 u_int16_t scam_tolerant; /* 08 no scam */ 147 148 u_int8_t adapter_scsi_id; /* 09 Host Adapter ID */ 149 u_int8_t bios_boot_delay; /* power up wait */ 150 151 u_int8_t scsi_reset_delay; /* 10 reset delay */ 152 u_int8_t bios_id_lun; /* first boot device scsi id & lun */ 153 /* high nibble is lun */ 154 /* low nibble is scsi id */ 155 156 u_int8_t termination_se; /* 11 0 - automatic */ 157 /* 1 - low off / high off */ 158 /* 2 - low off / high on */ 159 /* 3 - low on / high on */ 160 /* There is no low on / high off */ 161 162 u_int8_t termination_lvd; /* 11 0 - automatic */ 163 /* 1 - low off / high off */ 164 /* 2 - low off / high on */ 165 /* 3 - low on / high on */ 166 /* There is no low on / high off */ 167 168 u_int16_t bios_ctrl; /* 12 BIOS control bits */ 169 /* bit 0 BIOS don't act as initiator. */ 170 /* bit 1 BIOS > 1 GB support */ 171 /* bit 2 BIOS > 2 Disk Support */ 172 /* bit 3 BIOS don't support removables */ 173 /* bit 4 BIOS support bootable CD */ 174 /* bit 5 BIOS scan enabled */ 175 /* bit 6 BIOS support multiple LUNs */ 176 /* bit 7 BIOS display of message */ 177 /* bit 8 SCAM disabled */ 178 /* bit 9 Reset SCSI bus during init. */ 179 /* bit 10 */ 180 /* bit 11 No verbose initialization. */ 181 /* bit 12 SCSI parity enabled */ 182 /* bit 13 */ 183 /* bit 14 */ 184 /* bit 15 */ 185 union { 186 u_int16_t ultra_able; /* 13 ULTRA speed able */ 187 u_int16_t sdtr_speed2; /* 13 SDTR speed TID 4-7 */ 188 } sdtr2; 189 union { 190 u_int16_t reserved2; /* 14 reserved */ 191 u_int16_t sdtr_speed3; /* 14 SDTR speed TID 8-11 */ 192 } sdtr3; 193 u_int8_t max_host_qng; /* 15 maximum host queuing */ 194 u_int8_t max_dvc_qng; /* maximum per device queuing */ 195 u_int16_t dvc_cntl; /* 16 control bit for driver */ 196 union { 197 u_int16_t bug_fix; /* 17 control bit for bug fix */ 198 u_int16_t sdtr_speed4; /* 17 SDTR speed 4 TID 12-15 */ 199 } sdtr4; 200 u_int16_t serial_number[3]; /* 18 - 20 Board serial number */ 201 u_int16_t check_sum; /* 21 EEP check sum */ 202 u_int8_t oem_name[16]; /* 22 OEM name */ 203 u_int16_t dvc_err_code; /* 30 last device driver error code */ 204 u_int16_t adv_err_code; /* 31 last uc and Adw Lib error code */ 205 u_int16_t adv_err_addr; /* 32 last uc error address */ 206 u_int16_t saved_dvc_err_code; /* 33 saved last dev. driver error code */ 207 u_int16_t saved_adv_err_code; /* 34 saved last uc and Adw Lib error code */ 208 u_int16_t saved_adv_err_addr; /* 35 saved last uc error address */ 209 u_int16_t reserved1[20]; /* 36 - 55 reserved */ 210 u_int16_t cisptr_lsw; /* 56 CIS PTR LSW */ 211 u_int16_t cisprt_msw; /* 57 CIS PTR MSW */ 212 u_int16_t subsysvid; /* 58 SubSystem Vendor ID */ 213 u_int16_t subsysid; /* 59 SubSystem ID */ 214 u_int16_t reserved2[4]; /* 60 - 63 reserved */ 215 } ADW_EEPROM; 216 217 218 /* 219 * EEPROM Commands 220 */ 221 #define ASC_EEP_CMD_READ 0x80 222 #define ASC_EEP_CMD_WRITE 0x40 223 #define ASC_EEP_CMD_WRITE_ABLE 0x30 224 #define ASC_EEP_CMD_WRITE_DISABLE 0x00 225 226 #define ASC_EEP_CMD_DONE 0x0200 227 #define ASC_EEP_CMD_DONE_ERR 0x0001 228 229 /* cfg_word */ 230 #define EEP_CFG_WORD_BIG_ENDIAN 0x8000 231 232 /* bios_ctrl */ 233 #define BIOS_CTRL_BIOS 0x0001 234 #define BIOS_CTRL_EXTENDED_XLAT 0x0002 235 #define BIOS_CTRL_GT_2_DISK 0x0004 236 #define BIOS_CTRL_BIOS_REMOVABLE 0x0008 237 #define BIOS_CTRL_BOOTABLE_CD 0x0010 238 #define BIOS_CTRL_MULTIPLE_LUN 0x0040 239 #define BIOS_CTRL_DISPLAY_MSG 0x0080 240 #define BIOS_CTRL_NO_SCAM 0x0100 241 #define BIOS_CTRL_RESET_SCSI_BUS 0x0200 242 #define BIOS_CTRL_INIT_VERBOSE 0x0800 243 #define BIOS_CTRL_SCSI_PARITY 0x1000 244 #define BIOS_CTRL_AIPP_DIS 0x2000 245 246 #define ADW_3550_MEMSIZE 0x2000 /* 8 KB Internal Memory */ 247 #define ADW_3550_IOLEN 0x40 /* I/O Port Range in bytes */ 248 249 #define ADW_38C0800_MEMSIZE 0x4000 /* 16 KB Internal Memory */ 250 #define ADW_38C0800_IOLEN 0x100 /* I/O Port Range in bytes */ 251 252 #define ADW_38C1600_MEMSIZE 0x8000 /* 32 KB Internal Memory */ 253 #define ADW_38C1600_IOLEN 0x100 /* I/O Port Range 256 bytes */ 254 #define ADW_38C1600_MEMLEN 0x1000 /* Memory Range 4KB bytes */ 255 256 /* 257 * Byte I/O register address from base of 'iop_base'. 258 */ 259 #define IOPB_INTR_STATUS_REG 0x00 260 #define IOPB_CHIP_ID_1 0x01 261 #define IOPB_INTR_ENABLES 0x02 262 #define IOPB_CHIP_TYPE_REV 0x03 263 #define IOPB_RES_ADDR_4 0x04 264 #define IOPB_RES_ADDR_5 0x05 265 #define IOPB_RAM_DATA 0x06 266 #define IOPB_RES_ADDR_7 0x07 267 #define IOPB_FLAG_REG 0x08 268 #define IOPB_RES_ADDR_9 0x09 269 #define IOPB_RISC_CSR 0x0A 270 #define IOPB_RES_ADDR_B 0x0B 271 #define IOPB_RES_ADDR_C 0x0C 272 #define IOPB_RES_ADDR_D 0x0D 273 #define IOPB_SOFT_OVER_WR 0x0E 274 #define IOPB_RES_ADDR_F 0x0F 275 #define IOPB_MEM_CFG 0x10 276 #define IOPB_RES_ADDR_11 0x11 277 #define IOPB_GPIO_DATA 0x12 278 #define IOPB_RES_ADDR_13 0x13 279 #define IOPB_FLASH_PAGE 0x14 280 #define IOPB_RES_ADDR_15 0x15 281 #define IOPB_GPIO_CNTL 0x16 282 #define IOPB_RES_ADDR_17 0x17 283 #define IOPB_FLASH_DATA 0x18 284 #define IOPB_RES_ADDR_19 0x19 285 #define IOPB_RES_ADDR_1A 0x1A 286 #define IOPB_RES_ADDR_1B 0x1B 287 #define IOPB_RES_ADDR_1C 0x1C 288 #define IOPB_RES_ADDR_1D 0x1D 289 #define IOPB_RES_ADDR_1E 0x1E 290 #define IOPB_RES_ADDR_1F 0x1F 291 #define IOPB_DMA_CFG0 0x20 292 #define IOPB_DMA_CFG1 0x21 293 #define IOPB_TICKLE 0x22 294 #define IOPB_DMA_REG_WR 0x23 295 #define IOPB_SDMA_STATUS 0x24 296 #define IOPB_SCSI_BYTE_CNT 0x25 297 #define IOPB_HOST_BYTE_CNT 0x26 298 #define IOPB_BYTE_LEFT_TO_XFER 0x27 299 #define IOPB_BYTE_TO_XFER_0 0x28 300 #define IOPB_BYTE_TO_XFER_1 0x29 301 #define IOPB_BYTE_TO_XFER_2 0x2A 302 #define IOPB_BYTE_TO_XFER_3 0x2B 303 #define IOPB_ACC_GRP 0x2C 304 #define IOPB_RES_ADDR_2D 0x2D 305 #define IOPB_DEV_ID 0x2E 306 #define IOPB_RES_ADDR_2F 0x2F 307 #define IOPB_SCSI_DATA 0x30 308 #define IOPB_RES_ADDR_31 0x31 309 #define IOPB_RES_ADDR_32 0x32 310 #define IOPB_SCSI_DATA_HSHK 0x33 311 #define IOPB_SCSI_CTRL 0x34 312 #define IOPB_RES_ADDR_35 0x35 313 #define IOPB_RES_ADDR_36 0x36 314 #define IOPB_RES_ADDR_37 0x37 315 #define IOPB_RAM_BIST 0x38 316 #define IOPB_PLL_TEST 0x39 317 #define IOPB_PCI_INT_CFG 0x3A 318 #define IOPB_RES_ADDR_3B 0x3B 319 #define IOPB_RFIFO_CNT 0x3C 320 #define IOPB_RES_ADDR_3D 0x3D 321 #define IOPB_RES_ADDR_3E 0x3E 322 #define IOPB_RES_ADDR_3F 0x3F 323 324 /* 325 * Word I/O register address from base of 'iop_base'. 326 */ 327 #define IOPW_CHIP_ID_0 0x00 /* CID0 */ 328 #define IOPW_CTRL_REG 0x02 /* CC */ 329 #define IOPW_RAM_ADDR 0x04 /* LA */ 330 #define IOPW_RAM_DATA 0x06 /* LD */ 331 #define IOPW_RES_ADDR_08 0x08 332 #define IOPW_RISC_CSR 0x0A /* CSR */ 333 #define IOPW_SCSI_CFG0 0x0C /* CFG0 */ 334 #define IOPW_SCSI_CFG1 0x0E /* CFG1 */ 335 #define IOPW_RES_ADDR_10 0x10 336 #define IOPW_SEL_MASK 0x12 /* SM */ 337 #define IOPW_RES_ADDR_14 0x14 338 #define IOPW_FLASH_ADDR 0x16 /* FA */ 339 #define IOPW_RES_ADDR_18 0x18 340 #define IOPW_EE_CMD 0x1A /* EC */ 341 #define IOPW_EE_DATA 0x1C /* ED */ 342 #define IOPW_SFIFO_CNT 0x1E /* SFC */ 343 #define IOPW_RES_ADDR_20 0x20 344 #define IOPW_Q_BASE 0x22 /* QB */ 345 #define IOPW_QP 0x24 /* QP */ 346 #define IOPW_IX 0x26 /* IX */ 347 #define IOPW_SP 0x28 /* SP */ 348 #define IOPW_PC 0x2A /* PC */ 349 #define IOPW_RES_ADDR_2C 0x2C 350 #define IOPW_RES_ADDR_2E 0x2E 351 #define IOPW_SCSI_DATA 0x30 /* SD */ 352 #define IOPW_SCSI_DATA_HSHK 0x32 /* SDH */ 353 #define IOPW_SCSI_CTRL 0x34 /* SC */ 354 #define IOPW_HSHK_CFG 0x36 /* HCFG */ 355 #define IOPW_SXFR_STATUS 0x36 /* SXS */ 356 #define IOPW_SXFR_CNTL 0x38 /* SXL */ 357 #define IOPW_SXFR_CNTH 0x3A /* SXH */ 358 #define IOPW_RES_ADDR_3C 0x3C 359 #define IOPW_RFIFO_DATA 0x3E /* RFD */ 360 361 /* 362 * Doubleword I/O register address from base of 'iop_base'. 363 */ 364 #define IOPDW_RES_ADDR_0 0x00 365 #define IOPDW_RAM_DATA 0x04 366 #define IOPDW_RES_ADDR_8 0x08 367 #define IOPDW_RES_ADDR_C 0x0C 368 #define IOPDW_RES_ADDR_10 0x10 369 #define IOPDW_COMMA 0x14 370 #define IOPDW_COMMB 0x18 371 #define IOPDW_RES_ADDR_1C 0x1C 372 #define IOPDW_SDMA_ADDR0 0x20 373 #define IOPDW_SDMA_ADDR1 0x24 374 #define IOPDW_SDMA_COUNT 0x28 375 #define IOPDW_SDMA_ERROR 0x2C 376 #define IOPDW_RDMA_ADDR0 0x30 377 #define IOPDW_RDMA_ADDR1 0x34 378 #define IOPDW_RDMA_COUNT 0x38 379 #define IOPDW_RDMA_ERROR 0x3C 380 381 #define ADW_CHIP_ID_BYTE 0x25 382 #define ADW_CHIP_ID_WORD 0x04C1 383 384 #define ADW_SC_SCSI_BUS_RESET 0x2000 385 386 #define ADW_INTR_ENABLE_HOST_INTR 0x01 387 #define ADW_INTR_ENABLE_SEL_INTR 0x02 388 #define ADW_INTR_ENABLE_DPR_INTR 0x04 389 #define ADW_INTR_ENABLE_RTA_INTR 0x08 390 #define ADW_INTR_ENABLE_RMA_INTR 0x10 391 #define ADW_INTR_ENABLE_RST_INTR 0x20 392 #define ADW_INTR_ENABLE_DPE_INTR 0x40 393 #define ADW_INTR_ENABLE_GLOBAL_INTR 0x80 394 395 #define ADW_INTR_STATUS_INTRA 0x01 396 #define ADW_INTR_STATUS_INTRB 0x02 397 #define ADW_INTR_STATUS_INTRC 0x04 398 399 #define ADW_RISC_CSR_STOP (0x0000) 400 #define ADW_RISC_TEST_COND (0x2000) 401 #define ADW_RISC_CSR_RUN (0x4000) 402 #define ADW_RISC_CSR_SINGLE_STEP (0x8000) 403 404 #define ADW_CTRL_REG_HOST_INTR 0x0100 405 #define ADW_CTRL_REG_SEL_INTR 0x0200 406 #define ADW_CTRL_REG_DPR_INTR 0x0400 407 #define ADW_CTRL_REG_RTA_INTR 0x0800 408 #define ADW_CTRL_REG_RMA_INTR 0x1000 409 #define ADW_CTRL_REG_RES_BIT14 0x2000 410 #define ADW_CTRL_REG_DPE_INTR 0x4000 411 #define ADW_CTRL_REG_POWER_DONE 0x8000 412 #define ADW_CTRL_REG_ANY_INTR 0xFF00 413 414 #define ADW_CTRL_REG_CMD_RESET 0x00C6 415 #define ADW_CTRL_REG_CMD_WR_IO_REG 0x00C5 416 #define ADW_CTRL_REG_CMD_RD_IO_REG 0x00C4 417 #define ADW_CTRL_REG_CMD_WR_PCI_CFG_SPACE 0x00C3 418 #define ADW_CTRL_REG_CMD_RD_PCI_CFG_SPACE 0x00C2 419 420 #define ADW_TICKLE_NOP 0x00 421 #define ADW_TICKLE_A 0x01 422 #define ADW_TICKLE_B 0x02 423 #define ADW_TICKLE_C 0x03 424 425 #define ADW_SCSI_CTRL_RSTOUT 0x2000 426 427 #define ADW_IS_INT_PENDING(iot, ioh) \ 428 (ADW_READ_WORD_REGISTER((iot), (ioh), IOPW_CTRL_REG) & ADW_CTRL_REG_HOST_INTR) 429 430 /* 431 * SCSI_CFG0 Register bit definitions 432 */ 433 #define ADW_TIMER_MODEAB 0xC000 /* Watchdog, Second, and Select. Timer Ctrl. */ 434 #define ADW_PARITY_EN 0x2000 /* Enable SCSI Parity Error detection */ 435 #define ADW_EVEN_PARITY 0x1000 /* Select Even Parity */ 436 #define ADW_WD_LONG 0x0800 /* Watchdog Interval, 1: 57 min, 0: 13 sec */ 437 #define ADW_QUEUE_128 0x0400 /* Queue Size, 1: 128 byte, 0: 64 byte */ 438 #define ADW_PRIM_MODE 0x0100 /* Primitive SCSI mode */ 439 #define ADW_SCAM_EN 0x0080 /* Enable SCAM selection */ 440 #define ADW_SEL_TMO_LONG 0x0040 /* Sel/Resel Timeout, 1: 400 ms, 0: 1.6 ms */ 441 #define ADW_CFRM_ID 0x0020 /* SCAM id sel. confirm., 1: fast, 0: 6.4 ms */ 442 #define ADW_OUR_ID_EN 0x0010 /* Enable OUR_ID bits */ 443 #define ADW_OUR_ID 0x000F /* SCSI ID */ 444 445 /* 446 * SCSI_CFG1 Register bit definitions 447 */ 448 #define ADW_BIG_ENDIAN 0x8000 /* Enable Big Endian Mode MIO:15, EEP:15 */ 449 #define ADW_TERM_POL 0x2000 /* Terminator Polarity Ctrl. MIO:13, EEP:13 */ 450 #define ADW_SLEW_RATE 0x1000 /* SCSI output buffer slew rate */ 451 #define ADW_FILTER_SEL 0x0C00 /* Filter Period Selection */ 452 #define ADW_FLTR_DISABLE 0x0000 /* Input Filtering Disabled */ 453 #define ADW_FLTR_11_TO_20NS 0x0800 /* Input Filtering 11ns to 20ns */ 454 #define ADW_FLTR_21_TO_39NS 0x0C00 /* Input Filtering 21ns to 39ns */ 455 #define ADW_ACTIVE_DBL 0x0200 /* Disable Active Negation */ 456 #define ADW_DIFF_MODE 0x0100 /* SCSI differential Mode (Read-Only) */ 457 #define ADW_DIFF_SENSE 0x0080 /* 1: No SE cables, 0: SE cable (Read-Only) */ 458 #define ADW_TERM_CTL_SEL 0x0040 /* Enable TERM_CTL_H and TERM_CTL_L */ 459 #define ADW_TERM_CTL 0x0030 /* External SCSI Termination Bits */ 460 #define ADW_TERM_CTL_H 0x0020 /* Enable External SCSI Upper Termination */ 461 #define ADW_TERM_CTL_L 0x0010 /* Enable External SCSI Lower Termination */ 462 #define ADW_CABLE_DETECT 0x000F /* External SCSI Cable Connection Status */ 463 464 /* 465 * Addendum for ASC-38C0800 Chip 466 * 467 * The ASC-38C1600 Chip uses the same definitions except that the 468 * bus mode override bits [12:10] have been moved to byte register 469 * offset 0xE (IOPB_SOFT_OVER_WR) bits [12:10]. The [12:10] bits in 470 * SCSI_CFG1 are read-only and always available. Bit 14 (DIS_TERM_DRV) 471 * is not needed. The [12:10] bits in IOPB_SOFT_OVER_WR are write-only. 472 * Also each ASC-38C1600 function or channel uses only cable bits [5:4] 473 * and [1:0]. Bits [14], [7:6], [3:2] are unused. 474 */ 475 #define ADW_DIS_TERM_DRV 0x4000 /* 1: Read c_det[3:0], 0: cannot read */ 476 #define ADW_HVD_LVD_SE 0x1C00 /* Device Detect Bits */ 477 #define ADW_HVD 0x1000 /* HVD Device Detect */ 478 #define ADW_LVD 0x0800 /* LVD Device Detect */ 479 #define ADW_SE 0x0400 /* SE Device Detect */ 480 #define ADW_TERM_LVD 0x00C0 /* LVD Termination Bits */ 481 #define ADW_TERM_LVD_HI 0x0080 /* Enable LVD Upper Termination */ 482 #define ADW_TERM_LVD_LO 0x0040 /* Enable LVD Lower Termination */ 483 #define ADW_TERM_SE 0x0030 /* SE Termination Bits */ 484 #define ADW_TERM_SE_HI 0x0020 /* Enable SE Upper Termination */ 485 #define ADW_TERM_SE_LO 0x0010 /* Enable SE Lower Termination */ 486 #define ADW_C_DET_LVD 0x000C /* LVD Cable Detect Bits */ 487 #define ADW_C_DET3 0x0008 /* Cable Detect for LVD External Wide */ 488 #define ADW_C_DET2 0x0004 /* Cable Detect for LVD Internal Wide */ 489 #define ADW_C_DET_SE 0x0003 /* SE Cable Detect Bits */ 490 #define ADW_C_DET1 0x0002 /* Cable Detect for SE Internal Wide */ 491 #define ADW_C_DET0 0x0001 /* Cable Detect for SE Internal Narrow */ 492 493 494 #define CABLE_ILLEGAL_A 0x7 495 /* x 0 0 0 | on on | Illegal (all 3 connectors are used) */ 496 497 #define CABLE_ILLEGAL_B 0xB 498 /* 0 x 0 0 | on on | Illegal (all 3 connectors are used) */ 499 500 /* 501 The following table details the SCSI_CFG1 Termination Polarity, 502 Termination Control and Cable Detect bits. 503 504 Cable Detect | Termination 505 Bit 3 2 1 0 | 5 4 | Notes 506 _____________|________|____________________ 507 1 1 1 0 | on on | Internal wide only 508 1 1 0 1 | on on | Internal narrow only 509 1 0 1 1 | on on | External narrow only 510 0 x 1 1 | on on | External wide only 511 1 1 0 0 | on off| Internal wide and internal narrow 512 1 0 1 0 | on off| Internal wide and external narrow 513 0 x 1 0 | off off| Internal wide and external wide 514 1 0 0 1 | on off| Internal narrow and external narrow 515 0 x 0 1 | on off| Internal narrow and external wide 516 1 1 1 1 | on on | No devices are attached 517 x 0 0 0 | on on | Illegal (all 3 connectors are used) 518 0 x 0 0 | on on | Illegal (all 3 connectors are used) 519 520 x means don't-care (either '0' or '1') 521 522 If term_pol (bit 13) is '0' (active-low terminator enable), then: 523 'on' is '0' and 'off' is '1'. 524 525 If term_pol bit is '1' (meaning active-hi terminator enable), then: 526 'on' is '1' and 'off' is '0'. 527 */ 528 529 /* 530 * MEM_CFG Register bit definitions 531 */ 532 #define ADW_BIOS_EN 0x40 /* BIOS Enable MIO:14,EEP:14 */ 533 #define ADW_FAST_EE_CLK 0x20 /* Diagnostic Bit */ 534 #define ADW_RAM_SZ 0x1C /* Specify size of RAM to RISC */ 535 #define ADW_RAM_SZ_2KB 0x00 /* 2 KB */ 536 #define ADW_RAM_SZ_4KB 0x04 /* 4 KB */ 537 #define ADW_RAM_SZ_8KB 0x08 /* 8 KB */ 538 #define ADW_RAM_SZ_16KB 0x0C /* 16 KB */ 539 #define ADW_RAM_SZ_32KB 0x10 /* 32 KB */ 540 #define ADW_RAM_SZ_64KB 0x14 /* 64 KB */ 541 542 /* 543 * DMA_CFG0 Register bit definitions 544 * 545 * This register is only accessible to the host. 546 */ 547 #define BC_THRESH_ENB 0x80 /* PCI DMA Start Conditions */ 548 #define FIFO_THRESH 0x70 /* PCI DMA FIFO Threshold */ 549 #define FIFO_THRESH_16B 0x00 /* 16 bytes */ 550 #define FIFO_THRESH_32B 0x20 /* 32 bytes */ 551 #define FIFO_THRESH_48B 0x30 /* 48 bytes */ 552 #define FIFO_THRESH_64B 0x40 /* 64 bytes */ 553 #define FIFO_THRESH_80B 0x50 /* 80 bytes (default) */ 554 #define FIFO_THRESH_96B 0x60 /* 96 bytes */ 555 #define FIFO_THRESH_112B 0x70 /* 112 bytes */ 556 #define START_CTL 0x0C /* DMA start conditions */ 557 #define START_CTL_TH 0x00 /* Wait threshold level (default) */ 558 #define START_CTL_ID 0x04 /* Wait SDMA/SBUS idle */ 559 #define START_CTL_THID 0x08 /* Wait threshold and SDMA/SBUS idle */ 560 #define START_CTL_EMFU 0x0C /* Wait SDMA FIFO empty/full */ 561 #define READ_CMD 0x03 /* Memory Read Method */ 562 #define READ_CMD_MR 0x00 /* Memory Read */ 563 #define READ_CMD_MRL 0x02 /* Memory Read Long */ 564 #define READ_CMD_MRM 0x03 /* Memory Read Multiple (default) */ 565 566 /* 567 * ASC-38C0800 RAM BIST Register bit definitions 568 */ 569 #define RAM_TEST_MODE 0x80 570 #define PRE_TEST_MODE 0x40 571 #define NORMAL_MODE 0x00 572 #define RAM_TEST_DONE 0x10 573 #define RAM_TEST_STATUS 0x0F 574 #define RAM_TEST_HOST_ERROR 0x08 575 #define RAM_TEST_INTRAM_ERROR 0x04 576 #define RAM_TEST_RISC_ERROR 0x02 577 #define RAM_TEST_SCSI_ERROR 0x01 578 #define RAM_TEST_SUCCESS 0x00 579 #define PRE_TEST_VALUE 0x05 580 #define NORMAL_VALUE 0x00 581 582 /* 583 * ASC38C1600 Definitions 584 * 585 * IOPB_PCI_INT_CFG Bit Field Definitions 586 */ 587 588 #define INTAB_LD 0x80 /* Value loaded from EEPROM Bit 11. */ 589 590 /* 591 * Bit 1 can be set to change the interrupt for the Function to operate in 592 * Totem Pole mode. By default Bit 1 is 0 and the interrupt operates in 593 * Open Drain mode. Both functions of the ASC38C1600 must be set to the same 594 * mode, otherwise the operating mode is undefined. 595 */ 596 #define TOTEMPOLE 0x02 597 598 /* 599 * Bit 0 can be used to change the Int Pin for the Function. The value is 600 * 0 by default for both Functions with Function 0 using INT A and Function 601 * B using INT B. For Function 0 if set, INT B is used. For Function 1 if set, 602 * INT A is used. 603 * 604 * EEPROM Word 0 Bit 11 for each Function may change the initial Int Pin 605 * value specified in the PCI Configuration Space. 606 */ 607 #define INTAB 0x01 608 609 610 #define ADW_MAX_TID 15 /* max. target identifier */ 611 #define ADW_MAX_LUN 7 /* max. logical unit number */ 612 613 614 /* 615 * Adw Library Status Definitions 616 */ 617 #define ADW_TRUE 1 618 #define ADW_FALSE 0 619 #define ADW_NOERROR 1 620 #define ADW_SUCCESS 1 621 #define ADW_BUSY 0 622 #define ADW_ERROR (-1) 623 624 625 /* 626 * Warning code values for AdwInitFrom*EEP() functions 627 */ 628 #define ADW_WARN_BUSRESET_ERROR 0x0001 /* SCSI Bus Reset error */ 629 #define ADW_WARN_EEPROM_CHKSUM 0x0002 /* EEP check sum error */ 630 #define ADW_WARN_EEPROM_TERMINATION 0x0004 /* EEP termination bad field */ 631 #define ADW_WARN_SET_PCI_CONFIG_SPACE 0x0080 /* PCI config space set error */ 632 #define ADW_WARN_ERROR 0xFFFF /* ADW_ERROR return */ 633 634 /* 635 * Error code values for AdwInitAsc*Driver() functions 636 */ 637 #define ADW_IERR_WRITE_EEPROM 0x0001 /* write EEPROM error */ 638 #define ADW_IERR_MCODE_CHKSUM 0x0002 /* micro code check sum error */ 639 #define ADW_IERR_NO_CARRIER 0x0004 /* No more carrier memory. */ 640 #define ADW_IERR_START_STOP_CHIP 0x0008 /* start/stop chip failed */ 641 #define ADW_IERR_CHIP_VERSION 0x0040 /* wrong chip version */ 642 #define ADW_IERR_SET_SCSI_ID 0x0080 /* set SCSI ID failed */ 643 #define ADW_IERR_HVD_DEVICE 0x0100 /* HVD attached to LVD connector. */ 644 #define ADW_IERR_BAD_SIGNATURE 0x0200 /* signature not found */ 645 #define ADW_IERR_ILLEGAL_CONNECTION 0x0400 /* Illegal cable connection */ 646 #define ADW_IERR_SINGLE_END_DEVICE 0x0800 /* Single-end used w/differential */ 647 #define ADW_IERR_REVERSED_CABLE 0x1000 /* Narrow flat cable reversed */ 648 #define ADW_IERR_BIST_PRE_TEST 0x2000 /* BIST pre-test error */ 649 #define ADW_IERR_BIST_RAM_TEST 0x4000 /* BIST RAM test error */ 650 #define ADW_IERR_BAD_CHIPTYPE 0x8000 /* Invalid 'chip_type' setting. */ 651 652 /* 653 * BIOS LRAM variable absolute offsets. 654 */ 655 #define BIOS_CODESEG 0x54 656 #define BIOS_CODELEN 0x56 657 #define BIOS_SIGNATURE 0x58 658 #define BIOS_VERSION 0x5A 659 660 /* 661 * Chip Type flag values 662 */ 663 #define ADW_CHIP_ASC3550 0x01 /* Ultra-Wide IC */ 664 #define ADW_CHIP_ASC38C0800 0x02 /* Ultra2-Wide/LVD IC */ 665 #define ADW_CHIP_ASC38C1600 0x03 /* Ultra3-Wide/LVD2 IC */ 666 667 /* 668 * Adapter temporary configuration structure 669 * 670 * This structure can be discarded after initialization. Don't add 671 * fields here needed after initialization. 672 * 673 * Field naming convention: 674 * 675 * *_enable indicates the field enables or disables a feature. The 676 * value of the field is never reset. 677 */ 678 typedef struct adw_dvc_cfg { 679 u_int16_t disc_enable; /* enable disconnection */ 680 u_int8_t chip_version; /* chip version */ 681 u_int8_t termination; /* Term. Ctrl. bits 6-5 of SCSI_CFG1 */ 682 u_int16_t pci_device_id; /* PCI device code number */ 683 u_int16_t lib_version; /* Adw Library version number */ 684 u_int16_t control_flag; /* Microcode Control Flag */ 685 u_int16_t mcode_date; /* Microcode date */ 686 u_int16_t mcode_version; /* Microcode version */ 687 u_int16_t pci_slot_info; /* high byte device/function number 688 bits 7-3 device num., 689 bits 2-0 function num. 690 low byte bus num. */ 691 u_int16_t serial1; /* EEPROM serial number word 1 */ 692 u_int16_t serial2; /* EEPROM serial number word 2 */ 693 u_int16_t serial3; /* EEPROM serial number word 3 */ 694 } ADW_DVC_CFG; 695 696 697 #define NO_OF_SG_PER_BLOCK 15 698 699 typedef struct adw_sg_block { 700 u_int8_t reserved1; 701 u_int8_t reserved2; 702 u_int8_t reserved3; 703 u_int8_t sg_cnt; /* Valid entries in block. */ 704 u_int32_t sg_ptr; /* links to next sg block */ 705 struct { 706 u_int32_t sg_addr; /* SG element address */ 707 u_int32_t sg_count; /* SG element count */ 708 } sg_list[NO_OF_SG_PER_BLOCK]; 709 } ADW_SG_BLOCK; 710 711 712 /* 713 * ADW_SCSI_REQ_Q - microcode request structure 714 * 715 * All fields in this structure up to byte 60 are used by the microcode. 716 * The microcode makes assumptions about the size and ordering of fields 717 * in this structure. Do not change the structure definition here without 718 * coordinating the change with the microcode. 719 */ 720 typedef struct adw_scsi_req_q { 721 u_int8_t cntl; /* Ucode flags and state (ADW_MC_QC_*). */ 722 u_int8_t target_cmd; 723 u_int8_t target_id; /* Device target identifier. */ 724 u_int8_t target_lun; /* Device target logical unit number. */ 725 u_int32_t data_addr; /* Data buffer physical address. */ 726 u_int32_t data_cnt; /* Data count. Ucode sets to residual. */ 727 u_int32_t sense_addr; /* Sense buffer physical address. */ 728 u_int32_t carr_ba; /* Carrier p-address */ 729 u_int8_t mflag; /* Adw Library flag field. */ 730 u_int8_t sense_len; /* Auto-sense length. uCode sets to residual. */ 731 u_int8_t cdb_len; /* SCSI CDB length. Must <= 16 bytes. */ 732 u_int8_t scsi_cntl; 733 u_int8_t done_status; /* Completion status. (see below) */ 734 u_int8_t scsi_status; /* SCSI status byte. (see below) */ 735 u_int8_t host_status; /* ,uCode host status. (see below) */ 736 u_int8_t sg_working_ix; /* ,uCode working SG variable. */ 737 u_int8_t cdb[12]; /* SCSI CDB bytes 0-11. */ 738 u_int32_t sg_real_addr; /* SG list physical address. */ 739 u_int32_t scsiq_rptr; /* Internal pointer to ADW_SCSI_REQ_Q */ 740 u_int8_t cdb16[4]; /* SCSI CDB bytes 12-15. */ 741 u_int32_t ccb_ptr; /* CCB Physical Address */ 742 u_int32_t carr_va; /* Carrier v-address (unused) */ 743 /* 744 * End of microcode structure - 60 bytes. The rest of the structure 745 * is used by the Adw Library and ignored by the microcode. 746 */ 747 struct scsi_sense_data *vsense_addr; /* Sense buffer virtual address. */ 748 u_char *vdata_addr; /* Data buffer virtual address. */ 749 } ADW_SCSI_REQ_Q; 750 751 /* 752 * ASC_SCSI_REQ_Q 'done_status' return values. 753 */ 754 #define QD_NO_STATUS 0x00 /* Request not completed yet. */ 755 #define QD_NO_ERROR 0x01 756 #define QD_ABORTED_BY_HOST 0x02 757 #define QD_WITH_ERROR 0x04 758 759 /* 760 * ASC_SCSI_REQ_Q 'host_status' return values. 761 */ 762 #define QHSTA_NO_ERROR 0x00 763 #define QHSTA_M_SEL_TIMEOUT 0x11 764 #define QHSTA_M_DATA_OVER_RUN 0x12 765 #define QHSTA_M_UNEXPECTED_BUS_FREE 0x13 766 #define QHSTA_M_QUEUE_ABORTED 0x15 767 #define QHSTA_M_SXFR_SDMA_ERR 0x16 /* SXFR_STATUS SCSI DMA Error */ 768 #define QHSTA_M_SXFR_SXFR_PERR 0x17 /* SXFR_STATUS SCSI Bus Parity Error */ 769 #define QHSTA_M_RDMA_PERR 0x18 /* RISC PCI DMA parity error */ 770 #define QHSTA_M_SXFR_OFF_UFLW 0x19 /* SXFR_STATUS Offset Underflow */ 771 #define QHSTA_M_SXFR_OFF_OFLW 0x20 /* SXFR_STATUS Offset Overflow */ 772 #define QHSTA_M_SXFR_WD_TMO 0x21 /* SXFR_STATUS Watchdog Timeout */ 773 #define QHSTA_M_SXFR_DESELECTED 0x22 /* SXFR_STATUS Deselected */ 774 /* Note: QHSTA_M_SXFR_XFR_OFLW is identical to QHSTA_M_DATA_OVER_RUN. */ 775 #define QHSTA_M_SXFR_XFR_OFLW 0x12 /* SXFR_STATUS Transfer Overflow */ 776 #define QHSTA_M_SXFR_XFR_PH_ERR 0x24 /* SXFR_STATUS Transfer Phase Error */ 777 #define QHSTA_M_SXFR_UNKNOWN_ERROR 0x25 /* SXFR_STATUS Unknown Error */ 778 #define QHSTA_M_SCSI_BUS_RESET 0x30 /* Request aborted from SBR */ 779 #define QHSTA_M_SCSI_BUS_RESET_UNSOL 0x31 /* Request aborted from unsol. SBR */ 780 #define QHSTA_M_BUS_DEVICE_RESET 0x32 /* Request aborted from BDR */ 781 #define QHSTA_M_DIRECTION_ERR 0x35 /* Data Phase mismatch */ 782 #define QHSTA_M_DIRECTION_ERR_HUNG 0x36 /* Data Phase mismatch and bus hang */ 783 #define QHSTA_M_WTM_TIMEOUT 0x41 784 #define QHSTA_M_BAD_CMPL_STATUS_IN 0x42 785 #define QHSTA_M_NO_AUTO_REQ_SENSE 0x43 786 #define QHSTA_M_AUTO_REQ_SENSE_FAIL 0x44 787 #define QHSTA_M_INVALID_DEVICE 0x45 /* Bad target ID */ 788 #define QHSTA_M_FROZEN_TIDQ 0x46 /* TID Queue frozen. */ 789 #define QHSTA_M_SGBACKUP_ERROR 0x47 /* Scatter-Gather backup error */ 790 791 /* 792 * ASC_SCSI_REQ_Q 'scsi_status' return values. 793 */ 794 #define SCSI_STATUS_GOOD 0x00 795 #define SCSI_STATUS_CHECK_CONDITION 0x02 796 #define SCSI_STATUS_CONDITION_MET 0x04 797 #define SCSI_STATUS_TARGET_BUSY 0x08 798 #define SCSI_STATUS_INTERMID 0x10 799 #define SCSI_STATUS_INTERMID_COND_MET 0x14 800 #define SCSI_STATUS_RSERV_CONFLICT 0x18 801 #define SCSI_STATUS_CMD_TERMINATED 0x22 802 #define SCSI_STATUS_QUEUE_FULL 0x28 803 804 805 /* 806 * Adapter operation variable structure. 807 * 808 * One structure is required per host adapter. 809 * 810 * Field naming convention: 811 * 812 * *_able indicates both whether a feature should be enabled or disabled 813 * and whether a device is capable of the feature. At initialization 814 * this field may be set, but later if a device is found to be incapable 815 * of the feature, the field is cleared. 816 */ 817 #define CCB_HASH_SIZE 32 /* hash table size for phystokv */ 818 #define CCB_HASH_SHIFT 9 819 #define CCB_HASH(x) ((((x)) >> CCB_HASH_SHIFT) & (CCB_HASH_SIZE - 1)) 820 821 typedef struct adw_softc { 822 823 device_t sc_dev; 824 825 bus_space_tag_t sc_iot; 826 bus_space_handle_t sc_ioh; 827 bus_dma_tag_t sc_dmat; 828 bus_dmamap_t sc_dmamap_control; /* maps the control structures */ 829 bus_dmamap_t sc_dmamap_carrier; /* maps the carrier structures */ 830 void *sc_ih; 831 832 struct adw_control *sc_control; /* control structures */ 833 834 struct adw_ccb *sc_ccbhash[CCB_HASH_SIZE]; 835 TAILQ_HEAD(, adw_ccb) sc_free_ccb, sc_waiting_ccb; 836 TAILQ_HEAD(adw_pending_ccb, adw_ccb) sc_pending_ccb; 837 struct scsipi_adapter sc_adapter; 838 struct scsipi_channel sc_channel; 839 840 int sc_freeze_dev[ADW_MAX_TID+1]; 841 842 /* pointers to functions, called in AdwISR() */ 843 void (*isr_callback)(struct adw_softc *, ADW_SCSI_REQ_Q *); 844 void (*async_callback)(struct adw_softc *, u_int8_t); 845 846 u_int16_t bios_ctrl; /* BIOS control word, EEPROM word 12 */ 847 u_int16_t wdtr_able; /* try WDTR for a device */ 848 u_int16_t sdtr_able; /* try SDTR for a device */ 849 u_int16_t ultra_able; /* try SDTR Ultra speed for a device */ 850 u_int16_t sdtr_speed1; /* EEPROM SDTR Speed for TID 0-3 */ 851 u_int16_t sdtr_speed2; /* EEPROM SDTR Speed for TID 4-7 */ 852 u_int16_t sdtr_speed3; /* EEPROM SDTR Speed for TID 8-11 */ 853 u_int16_t sdtr_speed4; /* EEPROM SDTR Speed for TID 12-15 */ 854 u_int16_t tagqng_able; /* try tagged queuing with a device */ 855 u_int16_t ppr_able; /* PPR message capable per TID bitmask. */ 856 u_int16_t start_motor; /* start motor command allowed */ 857 u_int8_t max_dvc_qng; /* maximum number of tagged commands per device */ 858 u_int8_t scsi_reset_wait; /* delay in seconds after scsi bus reset */ 859 u_int8_t chip_no; /* should be assigned by caller */ 860 u_int8_t max_host_qng; /* maximum number of Q'ed command allowed */ 861 u_int8_t irq_no; /* IRQ number */ 862 u_int8_t chip_type; /* chip SCSI target ID */ 863 u_int16_t no_scam; /* scam_tolerant of EEPROM */ 864 u_int32_t drv_ptr; /* driver pointer to private structure */ 865 u_int8_t chip_scsi_id; /* chip SCSI target ID */ 866 u_int8_t bist_err_code; 867 u_int16_t carr_pending_cnt; /* Count of pending carriers. */ 868 struct adw_carrier *carr_freelist; /* Carrier free list. */ 869 struct adw_carrier *icq_sp; /* Initiator command queue stopper pointer. */ 870 struct adw_carrier *irq_sp; /* Initiator response queue stopper pointer. */ 871 /* 872 * Note: The following fields will not be used after initialization. The 873 * driver may discard the buffer after initialization is done. 874 */ 875 ADW_DVC_CFG cfg; /* temporary configuration structure */ 876 } ADW_SOFTC; 877 878 879 /* 880 * Microcode idle loop commands 881 */ 882 #define IDLE_CMD_COMPLETED 0 883 #define IDLE_CMD_STOP_CHIP 0x0001 884 #define IDLE_CMD_STOP_CHIP_SEND_INT 0x0002 885 #define IDLE_CMD_SEND_INT 0x0004 886 #define IDLE_CMD_ABORT 0x0008 887 #define IDLE_CMD_DEVICE_RESET 0x0010 888 #define IDLE_CMD_SCSI_RESET_START 0x0020 /* Assert SCSI Bus Reset */ 889 #define IDLE_CMD_SCSI_RESET_END 0x0040 /* Deassert SCSI Bus Reset */ 890 #define IDLE_CMD_SCSIREQ 0x0080 891 892 #define IDLE_CMD_STATUS_SUCCESS 0x0001 893 #define IDLE_CMD_STATUS_FAILURE 0x0002 894 895 /* 896 * AdwSendIdleCmd() flag definitions. 897 */ 898 #define ADW_NOWAIT 0x01 899 900 /* 901 * Wait loop time out values. 902 */ 903 #define SCSI_WAIT_10_SEC 10UL /* 10 seconds */ 904 #define SCSI_WAIT_100_MSEC 100UL /* 100 milliseconds */ 905 #define SCSI_US_PER_MSEC 1000 /* microseconds per millisecond */ 906 #define SCSI_MS_PER_SEC 1000UL /* milliseconds per second */ 907 #define SCSI_MAX_RETRY 10 /* retry count */ 908 909 #define ADV_ASYNC_RDMA_FAILURE 0x01 /* Fatal RDMA failure. */ 910 #define ADV_ASYNC_SCSI_BUS_RESET_DET 0x02 /* Detected SCSI Bus Reset. */ 911 #define ADV_ASYNC_CARRIER_READY_FAILURE 0x03 /* Carrier Ready failure. */ 912 913 #define ADV_HOST_SCSI_BUS_RESET 0x80 /* Host Initiated SCSI Bus Reset. */ 914 915 916 /* Read byte from a register. */ 917 #define ADW_READ_BYTE_REGISTER(iot, ioh, reg_off) \ 918 bus_space_read_1((iot), (ioh), (reg_off)) 919 920 /* Write byte to a register. */ 921 #define ADW_WRITE_BYTE_REGISTER(iot, ioh, reg_off, byte) \ 922 bus_space_write_1((iot), (ioh), (reg_off), (byte)) 923 924 /* Read word (2 bytes) from a register. */ 925 #define ADW_READ_WORD_REGISTER(iot, ioh, reg_off) \ 926 bus_space_read_2((iot), (ioh), (reg_off)) 927 928 /* Write word (2 bytes) to a register. */ 929 #define ADW_WRITE_WORD_REGISTER(iot, ioh, reg_off, word) \ 930 bus_space_write_2((iot), (ioh), (reg_off), (word)) 931 932 /* Write double word (4 bytes) to a register. */ 933 #define ADW_WRITE_DWORD_REGISTER(iot, ioh, reg_off, dword) \ 934 bus_space_write_4((iot), (ioh), (reg_off), (dword)) 935 936 /* Read byte from LRAM. */ 937 #define ADW_READ_BYTE_LRAM(iot, ioh, addr, byte) \ 938 do { \ 939 bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr)); \ 940 (byte) = bus_space_read_1((iot), (ioh), IOPB_RAM_DATA); \ 941 } while (0) 942 943 /* Write byte to LRAM. */ 944 #define ADW_WRITE_BYTE_LRAM(iot, ioh, addr, byte) \ 945 do { \ 946 bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr)); \ 947 bus_space_write_1((iot), (ioh), IOPB_RAM_DATA, (byte)); \ 948 } while (0) 949 950 /* Read word (2 bytes) from LRAM. */ 951 #define ADW_READ_WORD_LRAM(iot, ioh, addr, word) \ 952 do { \ 953 bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr)); \ 954 (word) = bus_space_read_2((iot), (ioh), IOPW_RAM_DATA); \ 955 } while (0) 956 957 /* Write word (2 bytes) to LRAM. */ 958 #define ADW_WRITE_WORD_LRAM(iot, ioh, addr, word) \ 959 do { \ 960 bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr)); \ 961 bus_space_write_2((iot), (ioh), IOPW_RAM_DATA, (word)); \ 962 } while (0) 963 964 /* Write double word (4 bytes) to LRAM */ 965 /* Because of unspecified C language ordering don't use auto-increment. */ 966 #define ADW_WRITE_DWORD_LRAM(iot, ioh, addr, dword) \ 967 do { \ 968 bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr)); \ 969 bus_space_write_2((iot), (ioh), IOPW_RAM_DATA, \ 970 (u_int16_t) ((dword) & 0xFFFF)); \ 971 bus_space_write_2((iot), (ioh), IOPW_RAM_ADDR, (addr) + 2); \ 972 bus_space_write_2((iot), (ioh), IOPW_RAM_DATA, \ 973 (u_int16_t) ((dword >> 16) & 0xFFFF)); \ 974 } while (0) 975 976 /* Read word (2 bytes) from LRAM assuming that the address is already set. */ 977 #define ADW_READ_WORD_AUTO_INC_LRAM(iot, ioh) \ 978 bus_space_read_2((iot), (ioh), IOPW_RAM_DATA) \ 979 980 /* Write word (2 bytes) to LRAM assuming that the address is already set. */ 981 #define ADW_WRITE_WORD_AUTO_INC_LRAM(iot, ioh, word) \ 982 bus_space_write_2((iot), (ioh), IOPW_RAM_DATA, (word)) 983 984 /* 985 * Define macro to check for Condor signature. 986 * 987 * Evaluate to ADW_TRUE if a Condor chip is found the specified port 988 * address 'iop_base'. Otherwise evalue to ADW_FALSE. 989 */ 990 #define ADW_FIND_SIGNATURE(iot, ioh) \ 991 (((ADW_READ_BYTE_REGISTER((iot), (ioh), IOPB_CHIP_ID_1) == \ 992 ADW_CHIP_ID_BYTE) && \ 993 (ADW_READ_WORD_REGISTER((iot), (ioh), IOPW_CHIP_ID_0) == \ 994 ADW_CHIP_ID_WORD)) ? ADW_TRUE : ADW_FALSE) 995 996 /* 997 * Define macro to Return the version number of the chip at 'iop_base'. 998 * 999 * The second parameter 'bus_type' is currently unused. 1000 */ 1001 #define ADW_GET_CHIP_VERSION(iot, ioh, bus_type) \ 1002 ADW_READ_BYTE_REGISTER((iot), (ioh), IOPB_CHIP_TYPE_REV) 1003 1004 /* 1005 * Abort an SRB in the chip's RISC Memory. The 'srb_ptr' argument must 1006 * match the ASC_SCSI_REQ_Q 'srb_ptr' field. 1007 * 1008 * If the request has not yet been sent to the device it will simply be 1009 * aborted from RISC memory. If the request is disconnected it will be 1010 * aborted on reselection by sending an Abort Message to the target ID. 1011 * 1012 * Return value: 1013 * ADW_TRUE(1) - Queue was successfully aborted. 1014 * ADW_FALSE(0) - Queue was not found on the active queue list. 1015 */ 1016 #define ADW_ABORT_CCB(sc, ccb_ptr) \ 1017 AdwSendIdleCmd((sc), (u_int16_t) IDLE_CMD_ABORT, (ccb_ptr)->hashkey) 1018 1019 /* 1020 * Send a Bus Device Reset Message to the specified target ID. 1021 * 1022 * All outstanding commands will be purged if sending the 1023 * Bus Device Reset Message is successful. 1024 * 1025 * Return Value: 1026 * ADW_TRUE(1) - All requests on the target are purged. 1027 * ADW_FALSE(0) - Couldn't issue Bus Device Reset Message; Requests 1028 * are not purged. 1029 */ 1030 #define ADW_RESET_DEVICE(sc, target_id) \ 1031 AdwSendIdleCmd((sc), (u_int16_t) IDLE_CMD_DEVICE_RESET, (target_id), 0) 1032 1033 /* 1034 * SCSI Wide Type definition. 1035 */ 1036 #define ADW_SCSI_BIT_ID_TYPE u_int16_t 1037 1038 /* 1039 * AdwInitScsiTarget() 'cntl_flag' options. 1040 */ 1041 #define ADW_SCAN_LUN 0x01 1042 #define ADW_CAPINFO_NOLUN 0x02 1043 1044 /* 1045 * Convert target id to target id bit mask. 1046 */ 1047 #define ADW_TID_TO_TIDMASK(tid) (0x01 << ((tid) & ADW_MAX_TID)) 1048 1049 /* 1050 * Adv Library functions available to drivers. 1051 */ 1052 1053 int AdwInitFromEEPROM(ADW_SOFTC *); 1054 int AdwInitDriver(ADW_SOFTC *); 1055 int AdwExeScsiQueue(ADW_SOFTC *, ADW_SCSI_REQ_Q *); 1056 int AdwISR(ADW_SOFTC *); 1057 void AdwResetChip(bus_space_tag_t, bus_space_handle_t); 1058 int AdwSendIdleCmd(ADW_SOFTC *, u_int16_t, u_int32_t); 1059 int AdwResetSCSIBus(ADW_SOFTC *); 1060 int AdwResetCCB(ADW_SOFTC *); 1061 1062 #endif /* _ADVANSYS_WIDE_LIBRARY_H_ */ 1063
Indexes created Sat Sep 20 22:09:52 GMT 2025