xref: /src/external/gpl2/xcvs/dist/src/sanity.sh

#! /bin/sh
:
#	sanity.sh -- a growing testsuite for cvs.
#
# The copyright notice said: "Copyright (C) 1992, 1993 Cygnus Support"
# I'm not adding new copyright notices for new years as our recent 
# practice has been to include copying terms without copyright notices.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# Original Author: K. Richard Pixley

# usage:
usage ()
{
    echo "Usage: `basename $0` --help"
    echo "Usage: `basename $0` [--eklrw] [-c CONFIG-FILE] [-f FROM-TEST] \\"
    echo "                 [-h HOSTNAME] [-s CVS-FOR-CVS-SERVER] CVS-TO-TEST \\"
    echo "                 [TESTS-TO-RUN...]"
}

exit_usage ()
{
    usage 1>&2
    exit 2
}

exit_help ()
{
    usage
    echo
    echo "-H|--help	display this text"
    echo "-c CONFIG-FILE"
    echo "--config=CONFIG_FILE"
    echo "		use an alternate test suite config file (defaults to"
    echo "		\`sanity.config.sh' in the same directory as"
    echo "		CVS-TO-TEST is found in)"
    echo "-e|--skipfail Treat tests that would otherwise be nonfatally skipped"
    echo "              for reasons like missing tools as failures, exiting"
    echo "              with an error message.  Also treat warnings as"
    echo "		failures."
    echo "-f FROM-TEST"
    echo "--from-test=FROM-TEST"
    echo "		run TESTS-TO-RUN, skipping all tests in the list before"
    echo "		FROM-TEST"
    echo "-h HOSTNAME"
    echo "--hostname HOSTNAME"
    echo "              Use :ext:HOSTNAME to run remote tests rather than"
    echo "              :fork:.  Implies --remote and assumes that \$TESTDIR"
    echo "              resolves to the same directory on both the client and"
    echo "              the server."
    echo "-k|--keep	try to keep directories created by individual tests"
    echo "		around, exiting after the first test which supports"
    echo "		--keep"
    echo "-l|--link-root"
    echo "		test CVS using a symlink to a real CVSROOT"
    echo "-n|--noredirect"
    echo "              test a secondary/primary CVS server (writeproxy)"
    echo "              configuration with the Redirect response disabled"
    echo "              (implies --proxy)."
    echo "-p|--proxy	test a secondary/primary CVS server (writeproxy)"
    echo "              configuration (implies --remote)."
    echo "-r|--remote	test client/server, as opposed to local, CVS"
    echo "-w|--wait	automatically sleep for a second before and after"
    echo "		checkouts, commits, and updates.  Use this option"
    echo "		if you have fast cores and a slow disk.  (For example,"
    echo "		you may need this flag if you see tests fail because"
    echo "		they think they have nothing to commit.)"
    echo "-s CVS-FOR-CVS-SERVER"
    echo "--server=CVS-FOR-CVS-SERVER"
    echo "		use CVS-FOR-CVS-SERVER as the path to the CVS SERVER"
    echo "		executable to be tested (defaults to CVS-TO-TEST and"
    echo "		implies --remote)"
    echo
    echo "CVS-TO-TEST	the path to the CVS executable to be tested; used as"
    echo "		the path to the CVS client when CVS-FOR-CVS-SERVER is"
    echo "		specified"
    echo "TESTS-TO-RUN	the names of the tests to run (defaults to all tests)"
    exit 2
}

checklongoptarg()
{
    if test "x$1" != xoptional && test -z "$OPTARG"; then
	echo "option \`--$LONGOPT' requires an argument" >&2
	exit_usage
    fi
}

# See TODO list at end of file.

# required to make this script work properly.
unset CVSREAD

# We want to invoke a predictable set of i18n behaviors, not whatever
# the user running this script might have set.
# In particular:
#   'sort' and tabs and spaces (LC_COLLATE).
#   Messages from getopt (LC_MESSAGES) (in the future, CVS itself might 
#     also alter its messages based on LC_MESSAGES).
LANG=C
export LANG
LC_ALL=C
export LC_ALL

# And a few tests want a predictable umask.
umask 0002

#
# Initialize the test counts.
#
passed=0
skipped=0
warnings=0



#
# read our options
#
unset configfile
unset fromtest
unset remotehost
unset rootoptions
keep=false
linkroot=false
noredirect=false
proxy=false
remote=false
servercvs=false
skipfail=false
waitforslowdisk=false
while getopts Hc:ef:h:klnprs:w-: option ; do
    # convert the long opts to short opts
    if test x$option = x-;  then
	# remove any argument
	if echo "$OPTARG" |grep = >/dev/null; then
	    LONGOPT=`echo "$OPTARG" |sed 's/=.*$//'`
	    OPTARG=`echo "$OPTARG" |sed -e 's/^.*=//'`
	else
	    LONGOPT=$OPTARG
	    OPTARG=
	fi
	# Convert LONGOPT to lower case
	LONGOPT=`echo "$LONGOPT" |sed 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
	case "$LONGOPT" in
	    c|co|con|conf|confi|config)
		option=c
		checklongoptarg
		;;
	    f|fr|fro|from|from-|from-t|from-te|from-tes|from-test)
		option=f
		checklongoptarg
		;;
	    h)
		echo "\`--h' is ambiguous.  Could mean \`--help' or \`--hostname'" >&2
		exit_usage
		;;
	    he|hel|help)
		option=H
		OPTARG=
		;;
	    ho|hos|host|hostn|hostna|hostnam|hostname)
		option=h
		checklongoptarg
		;;
	    k|ke|kee|keep)
		option=k
		OPTARG=
		;;
	    l|li|lin|link|link-|link-r]|link-ro|link-roo|link-root)
		option=l
		OPTARG=
		;;
	    n|no|nor|nore|nored|noredi|noredir|noredire|noredirec|noredirect)
		option=n
		OPTARG=
		;;
	    p|pr|pro|prox|proxy)
		option=p
		OPTARG=
		;;
	    r|re|rem|remo|remot|remote)
		option=r
		OPTARG=
		;;
	    s)
		echo "\`--s' is ambiguous.  Could mean \`--server' or \`--skipfail'" >&2
		exit_usage
		;;
	    se|ser|serv|serve|server)
		option=s
		checklongoptarg
		;;
	    sk|ski|skip|skipf|skipfa|skipfai|skipfail)
		option=e
		OPTARG=
		;;
	    w|wa|wai|wait)
		option=w
		OPTARG=
		;;
	    *)
		option=\?
		OPTARG=
	esac
    fi
    case "$option" in
	c)
	    configfile="$OPTARG"
	    ;;
	e)
	    skipfail=:
	    ;;
	f)
	    fromtest="$OPTARG"
	    ;;
	h)
	    # Set a remotehost to run the remote tests on via :ext:
	    # Implies `-r' and assumes that $TESTDIR resolves to the same
	    # directory on the client and the server.
	    remotehost="$OPTARG"
	    remote=:
	    ;;
	H)
	    exit_help
	    ;;
	k)
	    # The -k (keep) option will eventually cause all the tests to
	    # leave around the contents of the /tmp directory; right now only
	    # some implement it.  Not originally intended to be useful with
	    # more than one test, but this should work if each test uses a
	    # uniquely named dir (use the name of the test).
	    keep=:
	    ;;
	l)
	    linkroot=:
	    ;;
        n)
	    proxy=:
	    noredirect=:
	    remote=:
	    ;;
        p)
	    proxy=:
	    remote=:
	    ;;
	r)
	    remote=:
	    ;;
        s)
	    servercvs="$OPTARG"
	    remote=:
	    ;;
	w)
	    waitforslowdisk=:
	    ;;
	\?)
	    exit_usage
	    ;;
    esac
done

# boot the arguments we used above
while test $OPTIND -gt 1 ; do
    shift
    OPTIND=`expr $OPTIND - 1`
done

# Use full path for CVS executable, so that CVS_SERVER gets set properly
# for remote.
case $1 in
"")
  exit_usage
  ;;
/*)
  testcvs=$1
  ;;
*)
  testcvs=`pwd`/$1
  ;;
esac
shift

# Verify that $testcvs looks like CVS.
# we can't use test -x since BSD 4.3 doesn't support it.
if test ! -f $testcvs || test ! -r $testcvs; then
  echo "No such file or file not readable: $testcvs" >&2
  exit 1
fi
if $testcvs --version </dev/null 2>/dev/null |
     grep '^Concurrent Versions System' >/dev/null 2>&1; then :; else
  echo "Not a CVS executable: $testcvs" >&2
  exit 1
fi

# If $remotehost is set, warn if $TESTDIR isn't since we are pretty sure
# that its default value of `/tmp/cvs-sanity' will not resolve to the same
# directory on two different machines.
if test -n "$remotehost" && test -z "$TESTDIR"; then
    echo "WARNING: CVS server hostname is set and \$TESTDIR is not.  If" >&2
    echo "$remotehost is not the local machine, then it is unlikely that" >&2
    echo "the default value assigned to \$TESTDIR will resolve to the same" >&2
    echo "directory on both this client and the CVS server." >&2
fi

# Read our config file if we can find it.
#
# The config file should always be located in the same directory as the CVS
# executable, unless we are testing an executable outside of the build
# directory.  In this case, we echo a warning and attempt to assume the most
# portable configuration.
if test -z "$configfile"; then
	configfile=`dirname $testcvs`/sanity.config.sh
fi
if test -r "$configfile"; then
	. "$configfile"
else
	echo "WARNING: Failed to locate test suite config file" >&2
	echo "         \`$configfile'." >&2
fi



# Set a default value for $CVS_RSH. The sanity.config.sh file will
# have the configured value in the RSH_DFLT variable.
#
: ${CVS_RSH=${RSH_DFLT:-ssh}}; export CVS_RSH

if test -n "$remotehost"; then
    # Verify that $CVS_RSH $remotehost works.
    result=`$CVS_RSH $remotehost 'echo test'`
    if test $? != 0 || test "x$result" != "xtest"; then
	echo "\`$CVS_RSH $remotehost' failed." >&2
	exit 1
    fi
fi

case "$servercvs" in
"")
  exit_usage
  ;;
false)
  ;;
/*)
  ;;
*)
  servercvs=`pwd`/$servercvs
  ;;
esac

if test false != $servercvs; then
  # Allow command line to override $CVS_SERVER
  CVS_SERVER=$servercvs
else
  # default $CVS_SERVER to ${testcvs}
  : ${CVS_SERVER=$testcvs}
  # With the previous command, effectively defaults $servercvs to $CVS_SERVER,
  # then $testcvs
  servercvs=$CVS_SERVER
fi
export CVS_SERVER
servercvs_orig=$servercvs

# Fail in client/server mode if our ${servercvs} does not contain server
# support.
if $remote; then
  if test -n "$remotehost"; then
    if $CVS_RSH $remotehost "test ! -f ${servercvs} || test ! -r ${servercvs}"
    then
      echo "No such file or file not readable: $remotehost:${testcvs}" >&2
      exit 1
    fi
    if $CVS_RSH $remotehost "${servercvs} --version </dev/null 2>/dev/null |
         grep '^Concurrent Versions System' >/dev/null 2>&1"; then :; else
      echo "Not a CVS executable: $remotehost:${servercvs}" >&2
      exit 1
    fi
    if $CVS_RSH $remotehost "${servercvs} --version </dev/null |
         grep '^Concurrent.*(.*server)$' >/dev/null 2>&1"; then :; else
      echo "CVS executable \`$remotehost:${servercvs}' does not contain server support." >&2
      exit 1
    fi
  else
    if test ! -f ${servercvs} || test ! -r ${servercvs}; then
      echo "No such file or file not readable: ${testcvs}" >&2
      exit 1
    fi
    if ${servercvs} --version </dev/null 2>/dev/null |
         grep '^Concurrent Versions System' >/dev/null 2>&1; then :; else
      echo "Not a CVS executable: ${servercvs}" >&2
      exit 1
    fi
    if ${servercvs} --version </dev/null |
         grep '^Concurrent.*(.*server)$' >/dev/null 2>&1; then :; else
      echo "CVS executable \`${servercvs}' does not contain server support." >&2
      exit 1
    fi
  fi
fi

# Fail in client/server mode if our ${testcvs} does not contain client
# support.
if $remote; then
  if ${testcvs} --version </dev/null |
       grep '^Concurrent.*(client.*)$' >/dev/null 2>&1; then :; else
    echo "CVS executable \`${testcvs}' does not contain client support." >&2
    exit 1
  fi
fi

# For the "fork" tests.
if ${testcvs} --version </dev/null |
     grep '^Concurrent.*(.*server)$' >/dev/null 2>&1
then
  testcvs_server_support=:
else
  testcvs_server_support=false
fi



dokeep() 
{ 
    if ${keep}; then
      echo "Keeping ${TESTDIR} for test case \`${what}' and exiting due to --keep"
      exit 0
    fi
}



###
### GUTS
###

# "debugger"
#set -x

echo 'This test should produce no other output than this message, and a final "OK".'
echo '(Note that the test can take an hour or more to run and periodically stops'
echo 'for as long as one minute.  Do not assume there is a problem just because'
echo 'nothing seems to happen for a long time.  If you cannot live without'
echo "running status, try the command: \`tail -f check.log' from another window.)"

# Regexp to match what the CVS client will call itself in output that it prints.
# FIXME: we don't properly quote this--if the name contains . we'll
# just spuriously match a few things; if the name contains other regexp
# special characters we are probably in big trouble.
CPROG=`basename ${testcvs} |sed 's/\.exe$//'`
# And the regexp for the CVS server when we have one.  In local mode, this
# defaults to $CPROG since $servercvs already did.
# FIXCVS: There are a few places in error messages where CVS suggests a command
# and outputs $SPROG as the suggested executable.  This could hopefully use
# MT (tagged text - see doc/cvs-client.texi) to request that the client print
# its own name.
SPROG=`basename ${servercvs} |sed 's/\.exe$//'`


# Match the hostname
hostname="[-_.a-zA-Z0-9]*"

# Regexp to match a commitid
commitid="[a-zA-Z0-9]*"

# Regexp to match the name of a temporary file (from cvs_temp_name).
# This appears in certain diff output.
tempfile="cvs[-a-zA-Z0-9.%_]*"
# $tempname set after $TMPDIR, below.

# Regexp to match a date in RFC822 format (as amended by RFC1123).
RFCDATE="[a-zA-Z0-9 ][a-zA-Z0-9 ]* [0-9:][0-9:]* -0000"
RFCDATE_EPOCH="1 Jan 1970 00:00:00 -0000"

# Special times used in touch -t commands and the regular expresions
# to match them. Now that the tests set TZ=UTC0, it
# should be easier to be more exact in their regexp.
TOUCH1971="197107040343"
# This date regexp was 1971/07/0[3-5] [0-9][0-9]:43:[0-9][0-9]
ISO8601DATE1971="1971-07-04 03:43:[0-9][0-9] [+-]0000"

TOUCH2034="203412251801"
# This date regexp was 2034/12/2[4-6] [0-9][0-9]:01:[0-9][0-9]
ISO8601DATE2034="2034-12-25 18:01:[0-9][0-9] [+-]0000"

# Used in admin tests for exporting RCS files.
# The RAWRCSDATE..... format is for internal ,v files and
# the ISO8601DATE..... format is to allow for a regular expression in
# 'cvs log' output patterns. The tests that use this set of specific
# ${ISO8601DATE.....} variables also force TZ=UTC0 for the test.
RAWRCSDATE2000A="2000.11.24.15.58.37"
RAWRCSDATE1996A="96.11.24.15.57.41"
RAWRCSDATE1996B="96.11.24.15.56.05"
ISO8601DATE2000A="2000-11-24 15:58:37 [+-]0000"
ISO8601DATE1996A="1996-11-24 15:57:41 [+-]0000"
ISO8601DATE1996B="1996-11-24 15:56:05 [+-]0000"

# Regexp to match the date in cvs log command output
# This format has been enhanced in the future to accept either
# old-style cvs log output dates or new-style ISO8601 timezone
# information similar to the ISODATE format. The RCSKEYDATE is
# similar, but uses '/' instead of '-' to sepearate year/month/day
# and does not include the optional timezone offset.
ISO8601DATE="[0-9][0-9][0-9][0-9]-[0-1][0-9]-[0-3][0-9] [0-2][0-9]:[0-6][0-9]:[0-6][0-9] [-+][0-1][0-9][0-6][0-9]"

# Regexp to match the dates found in rcs keyword strings
RCSKEYDATE="[0-9][0-9][0-9][0-9]/[0-9][0-9]/[0-9][0-9] [0-9][0-9]:[0-9][0-9]:[0-9][0-9]"

# Regexp to match the date in the delta section of rcs format files.
# Dates in very old RCS files may not have included the century.
RCSDELTADATE="[0-9][0-9]*\.[0-9][0-9]\.[0-9][0-9]\.[0-9][0-9]\.[0-9][0-9]\.[0-9][0-9]"

# Regexp to match a date in standard Unix format as used by rdiff
# FIXCVS: There's no reason for rdiff to use a different date format
# than diff does
DATE="[a-zA-Z]* [a-zA-Z]* [ 1-3][0-9] [0-9:]* [0-9]*"
# ISO 8601 format "yyyy-mm-dd hh:mm -0000"
ISODATE="[0-9][0-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9] [0-9][0-9]:[0-9][0-9] [+-][0-9][0-9][0-9][0-9]"
# %p format is not well defined (nil) and hex digits are common. Using
# ..* is a bad idea as the tests take a very long time to run due to
# the complexity of the expressions.  If you run into any other characters
# that are used in a %p format, add them here.
PFMT="[0-9a-zA-Z()][0-9a-zA-Z()]*"

# Which directories should Which and find_tool search for executables?
SEARCHPATH=$PATH:/usr/local/bin:/usr/contrib/bin:/usr/contrib:/usr/gnu/bin:/local/bin:/local/gnu/bin:/gnu/bin:/sw/bin:/usr/pkg/bin

# Do not assume that `type -p cmd` is portable
# Usage: Which [-a] [-x|-f|-r] prog [$SEARCHPATH:/with/directories:/to/search]
Which() {
  # Optional first argument for file type, defaults to -x.
  # Second argument is the file or directory to be found.
  # Third argument is the PATH to search.
  # By default, print only the first file that matches,
  # -a will cause all matches to be printed.
  notevery=:
  if [ "x$1" = "x-a" ]; then notevery=false; shift; fi
  case "$1" in
    -*) t=$1; shift ;;
    *) t=-x ;;
  esac
  case "$1" in
    # FIXME: Someday this may need to be fixed
    # to deal better with C:\some\path\to\ssh values...
    /*) test $t $1 && echo $1 ;;
    *) for d in `IFS=:; echo ${2-$SEARCHPATH}`
       do
         test $t $d/$1 && { echo $d/$1; if $notevery; then break; fi; }
       done
       ;;
  esac
}


# On cygwin32, we may not have /bin/sh.
if test -r /bin/sh; then
  TESTSHELL="/bin/sh"
else
  TESTSHELL=`Which -f sh`
  if test ! -r "$TESTSHELL"; then
    TESTSHELL="/bin/sh"
  fi
fi

# FIXME: try things (what things? checkins?) without -m.
#
# Some of these tests are written to expect -Q.  But testing with
# -Q is kind of bogus, it is not the way users actually use CVS (usually).
# So new tests probably should invoke ${testcvs} directly, rather than ${CVS}.
# and then they've obviously got to do something with the output....
#
CVS="${testcvs} -Q"

LOGFILE=`pwd`/check.log

# Save the previous log in case the person running the tests decides
# they want to look at it.  The extension ".plog" is chosen for consistency
# with dejagnu.
test -f check.plog && mv check.plog check.plog~
test -f check.log && mv check.log check.plog

# Create the log file so check.log can be tailed almost immediately after
# this script is started.  Otherwise it can take up to a minute or two before
# the log file gets created when $remotehost is specified on some systems,
# which makes for a lot of failed `tail -f' attempts.
touch check.log

# Workaround any X11Forwarding by ssh. Otherwise this text:
#   Warning: No xauth data; using fake authentication data for X11 forwarding.
# has been known to end up in the test results below
# causing the test to fail.
[ -n "$DISPLAY" ] && unset DISPLAY
  
# The default value of /tmp/cvs-sanity for TESTDIR is dubious,
# because it loses if two people/scripts try to run the tests
# at the same time.  Some possible solutions:
# 1.  Use /tmp/cvs-test$$.  One disadvantage is that the old
#     cvs-test* directories would pile up, because they wouldn't
#     necessarily get removed.
# 2.  Have everyone/everything running the testsuite set
#     TESTDIR to some appropriate directory.
# 3.  Have the default value of TESTDIR be some variation of
#     `pwd`/cvs-sanity.  The biggest problem here is that we have
#     been fairly careful to test that CVS prints in messages the
#     actual pathnames that we pass to it, rather than a different
#     pathname for the same directory, as may come out of `pwd`.
#     So this would be lost if everything was `pwd`-based.  I suppose
#     if we wanted to get baroque we could start making symlinks
#     to ensure the two are different.
if test -n "$remotehost"; then
        # We need to set $tmp on the server since $TMPDIR is compared against
	# messages generated by the server.
	tmp=`$CVS_RSH $remotehost 'cd /tmp; /bin/pwd || pwd' 2>/dev/null`
	if test $? != 0; then
	    echo "$CVS_RSH $remotehost failed." >&2
	    exit 1
	fi
else
	tmp=`(cd /tmp; /bin/pwd || pwd) 2>/dev/null`
fi

# Now:
#	1) Set TESTDIR if it's not set already
#	2) Remove any old test remnants
#	3) Create $TESTDIR
#	4) Normalize TESTDIR with `cd && (/bin/pwd || pwd)`
#	   (This will match CVS output later)
: ${TESTDIR=$tmp/cvs-sanity}
# clean any old remnants (we need the chmod because some tests make
# directories read-only)
if test -d $TESTDIR; then
    chmod -R a+wx $TESTDIR
    rm -rf $TESTDIR
fi
# These exits are important.  The first time I tried this, if the `mkdir && cd`
# failed then the build directory would get blown away.  Some people probably
# wouldn't appreciate that.
mkdir $TESTDIR || exit 1
cd $TESTDIR || exit 1
# Ensure $TESTDIR is absolute
if echo "$TESTDIR" |grep '^[^/]'; then
    # Don't resolve this unless we have to.  This keeps symlinks intact.  This
    # is important at least when testing using -h $remotehost, because the same
    # value for $TESTDIR must resolve to the same directory on the client and
    # the server and we likely used Samba, and possibly symlinks, to do this.
    TESTDIR=`(/bin/pwd || pwd) 2>/dev/null`
fi

if test -z "$TESTDIR" || echo "$TESTDIR" |grep '^[^/]'; then
    echo "Unable to resolve TESTDIR to an absolute directory." >&2
    exit 1
fi
cd $TESTDIR



: ${TIMING=false}
if $remote; then
    # Now override our CVS_RSH in order to forward variables which affect the
    # test suite through.  This always needs to be done when $remotehost is
    # set, needs to be done in $proxy mode for the crerepos tests, and needs to
    # be done in $remote mode for the writeproxy-ssh tests.
    if $TIMING; then
	time="/usr/bin/time -ao'$TESTDIR/time.out'"
    else
	time=
    fi
    cat >$TESTDIR/ssh-wrapper-env <<EOF
#! $TESTSHELL
while [ \$# -gt 0 ]
do
  case "\$1" in
    *=*)
      eval "\$1"
      var=\`echo "\$1" | sed 's/^\\(.*\\)=.*\$/\\1/'\`
      export \$var
      ;;
    *) break;;
  esac
  shift
done
exec \${1+"\$@"}
EOF
    chmod a+x $TESTDIR/ssh-wrapper-env
    cat >$TESTDIR/ssh-wrapper <<EOF
#! $TESTSHELL
hostname=\$1
shift
exec \
$CVS_RSH \
	 \$hostname \
	 $TESTDIR/ssh-wrapper-env \
	 "CVS_SERVER='\$CVS_SERVER'" \
	 "CVS_SERVER_SLEEP='\$CVS_SERVER_SLEEP'" \
	 "CVS_PARENT_SERVER_SLEEP='\$CVS_PARENT_SERVER_SLEEP'" \
	 "CVS_SERVER_LOG='\$CVS_SERVER_LOG'" \
	 "CVS_SECONDARY_LOG='\$CVS_SECONDARY_LOG'" \
	 "TMPDIR='\$TMPDIR'" \
	 "CVS_RSH='$TESTDIR/ssh-wrapper'" \
	 "CVSUMASK='\$CVSUMASK'" \
	 "CVS_PID='\$CVS_PID'" \
	 $time \
	 \${1+"\$@"}
EOF
    chmod a+x $TESTDIR/ssh-wrapper
    CVS_RSH=$TESTDIR/ssh-wrapper
fi # $remotehost



# Now set $TMPDIR if the user hasn't overridden it.
#
# We use a $TMPDIR under $TESTDIR by default so that two tests may be run at
# the same time without bumping heads without requiring the user to specify
# more than $TESTDIR.  See the test for leftover cvs-serv* directories near the
# end of this script at the end of "The big loop".
: ${TMPDIR=$TESTDIR/tmp}
export TMPDIR
if test -d $TMPDIR; then :; else
    mkdir $TMPDIR
fi


# Regexp to match the the full path to a temporary file (from cvs_temp_name).
# This appears in certain diff output.
tempname=$TMPDIR/$tempfile

# Make sure various tools work the way we expect, or try to find
# versions that do.
: ${AWK=awk}
: ${EXPR=expr}
: ${ID=id}
: ${TR=tr}

# Keep track of tools that are found, but do NOT work as we hope
# in order to avoid them in future
badtools=
set_bad_tool ()
{
   badtools=$badtools:$1
}
is_bad_tool ()
{
   case ":$badtools:" in *:$1:*) return 0 ;; *) return 1 ; esac
}

version_test ()
{
  vercmd=$1
  verbad=:
  if RES=`$vercmd --version </dev/null 2>&1`; then
    if test "X$RES" != "X--version" && test "X$RES" != "X" ; then
      echo "$RES"
      verbad=false
    fi
  fi
  if $verbad; then
    echo "The command \`$vercmd' does not support the --version option."
  fi
  # It does not really matter that --version is not supported
  return 0
}

# Try to find a tool that satisfies all of the tests.
# Usage: list:of:colon:separated:alternatives test1 test2 test3 test4...
# Example: find_tool awk:gawk:nawk awk_tooltest1 awk_tooltest2
find_tool ()
{
  default_TOOL=$1
  echo find_tool: ${1+"$@"} >>$LOGFILE
  cmds="`IFS=:; echo $1`"; shift; tooltests="${1+$@}"
  if test -z "$tooltests"; then tooltests=version_test; fi
  clist=; for cmd in $cmds; do clist="$clist `Which -a $cmd`"; done
  # Make sure the default tool is just the first real command name
  for default_TOOL in $clist `IFS=:; echo $default_TOOL`; do break; done
  TOOL=""
  for trytool in $clist ; do
    pass=:
    for tooltest in $tooltests; do
      result=`eval $tooltest $trytool`
      rc=$?
      echo "Running $tooltest $trytool" >>$LOGFILE
      if test -n "$result"; then
	echo "$result" >>$LOGFILE
      fi
      if test "$rc" = "0"; then
        echo "PASS: $tooltest $trytool" >>$LOGFILE
      elif test "$rc" = "77"; then
        echo "MARGINAL: $tooltest $trytool; rc=$rc" >>$LOGFILE
        TOOL=$trytool
	pass=false
      else
        set_bad_tool $trytool
        echo "FAIL: $tooltest $trytool; rc=$rc" >>$LOGFILE
	pass=false
      fi
    done
    if $pass; then
      echo $trytool
      return 0
    fi
  done
  if test -n "$TOOL"; then
    echo "Notice: The default version of \`$default_TOOL' is defective." >>$LOGFILE
    echo "using \`$TOOL' and hoping for the best." >>$LOGFILE
    echo "Notice: The default version of \`$default_TOOL' is defective." >&2
    echo "using \`$TOOL' and hoping for the best." >&2
    echo $TOOL
  else
    echo $default_TOOL
  fi
}  

id_tool_test ()
{
  id=$1
  if $id -u >/dev/null 2>&1 && $id -un >/dev/null 2>&1; then
    return 0
  else
    echo "Running these tests requires an \`id' program that understands the"
    echo "-u and -n flags.  Make sure that such an id (GNU, or many but not"
    echo "all vendor-supplied versions) is in your path."
    return 1
  fi
}

ID=`find_tool id version_test id_tool_test`
echo "Using ID=$ID" >>$LOGFILE

# You can't run CVS as root; print a nice error message here instead
# of somewhere later, after making a mess.
for pass in false :; do
  case "`$ID -u 2>/dev/null`" in
    "0")
      echo "Test suite does not work correctly when run as root" >&2
      exit 1
      ;;

    *)
      break
      ;;
  esac
done

# Cause NextStep 3.3 users to lose in a more graceful fashion.
expr_tooltest1 ()
{
expr=$1
if $expr 'abc
def' : 'abc
def' >/dev/null; then
  # good, it works
  return 0
else
  echo 'Running these tests requires an "expr" program that can handle'
  echo 'multi-line patterns.  Make sure that such an expr (GNU, or many but'
  echo 'not all vendor-supplied versions) is in your path.'
  return 1
fi
}

# Warn SunOS, SysVr3.2, etc., users that they may be partially losing
# if we can't find a GNU expr to ease their troubles...
expr_tooltest2 ()
{
expr=$1
if $expr 'a
b' : 'a
c' >/dev/null; then
  echo 'Warning: you are using a version of expr that does not correctly'
  echo 'match multi-line patterns.  Some tests may spuriously pass or fail.'
  echo 'You may wish to make sure GNU expr is in your path.'
  return 1
else
  return 0
fi
}

expr_create_bar ()
{
echo 'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ' >${TESTDIR}/foo
cat ${TESTDIR}/foo ${TESTDIR}/foo ${TESTDIR}/foo ${TESTDIR}/foo >${TESTDIR}/bar
cat ${TESTDIR}/bar ${TESTDIR}/bar ${TESTDIR}/bar ${TESTDIR}/bar >${TESTDIR}/foo
cat ${TESTDIR}/foo ${TESTDIR}/foo ${TESTDIR}/foo ${TESTDIR}/foo >${TESTDIR}/bar
rm -f ${TESTDIR}/foo
}

expr_tooltest3 ()
{
expr=$1
# More SunOS lossage...
test ! -f ${TESTDIR}/bar && expr_create_bar
if $expr "`cat ${TESTDIR}/bar`" : "`cat ${TESTDIR}/bar`" >/dev/null; then
  : good, it works
else
  echo 'Warning: you are using a version of expr that does not correctly'
  echo 'match large patterns.  Some tests may spuriously pass or fail.'
  echo 'You may wish to make sure GNU expr is in your path.'
  return 1
fi
if $expr "`cat ${TESTDIR}/bar`x" : "`cat ${TESTDIR}/bar`y" >/dev/null; then
  echo 'Warning: you are using a version of expr that does not correctly'
  echo 'match large patterns.  Some tests may spuriously pass or fail.'
  echo 'You may wish to make sure GNU expr is in your path.'
  return 1
fi
# good, it works
return 0
}

# That we should have to do this is total bogosity, but GNU expr
# version 1.9.4-1.12 uses the emacs definition of "$" instead of the unix
# (e.g. SunOS 4.1.3 expr) one.  Rumor has it this will be fixed in the
# next release of GNU expr after 1.12 (but we still have to cater to the old
# ones for some time because they are in many linux distributions).
ENDANCHOR="$"
expr_set_ENDANCHOR ()
{
expr=$1
ENDANCHOR="$"
if $expr 'abc
def' : 'abc$' >/dev/null; then
  ENDANCHOR='\'\'
   echo "Notice: An ENDANCHOR of dollar does not work."
   echo "Using a workaround for GNU expr versions 1.9.4 thru 1.12"
fi
return 0
}

# Work around another GNU expr (version 1.10-1.12) bug/incompatibility.
# "." doesn't appear to match a newline (it does with SunOS 4.1.3 expr).
# Note that the workaround is not a complete equivalent of .* because
# the first parenthesized expression in the regexp must match something
# in order for expr to return a successful exit status.
# Rumor has it this will be fixed in the
# next release of GNU expr after 1.12 (but we still have to cater to the old
# ones for some time because they are in many linux distributions).
DOTSTAR='.*'
expr_set_DOTSTAR ()
{
expr=$1
DOTSTAR='.*'
if $expr 'abc
def' : "a${DOTSTAR}f" >/dev/null; then
  : good, it works
else
  DOTSTAR='\(.\|
\)*'
  echo "Notice: DOTSTAR changed from sane \`.*' value to \`$DOTSTAR\`"
  echo "to workaround GNU expr version 1.10 thru 1.12 bug where \`.'"
  echo "does not match a newline."
fi
return 0
}

# Now that we have DOTSTAR, make sure it works with big matches
expr_tooltest_DOTSTAR ()
{
expr=$1
test ! -f ${TESTDIR}/bar && expr_create_bar
if $expr "`cat ${TESTDIR}/bar`" : "${DOTSTAR}xyzABC${DOTSTAR}$" >/dev/null; then
  # good, it works
  return 0
else
  echo 'Warning: you are using a version of expr that does not correctly'
  echo 'match large patterns.  Some tests may spuriously pass or fail.'
  echo 'You may wish to make sure GNU expr is in your path.'
  return 77
fi
}

EXPR=`find_tool ${EXPR}:gexpr \
  version_test expr_tooltest1 expr_tooltest2 expr_tooltest3 \
expr_set_ENDANCHOR expr_set_DOTSTAR expr_tooltest_DOTSTAR`

# Set the ENDANCHOR and DOTSTAR for the chosen expr version.
expr_set_ENDANCHOR ${EXPR} >/dev/null
expr_tooltest_DOTSTAR ${EXPR} >/dev/null

echo "Using EXPR=$EXPR" >>$LOGFILE
echo "Using ENDANCHOR=$ENDANCHOR" >>$LOGFILE
echo "Using DOTSTAR=$DOTSTAR" >>$LOGFILE

# Cleanup
rm -f ${TESTDIR}/bar

# Work around yet another GNU expr (version 1.10) bug/incompatibility.
# "+" is a special character, yet for unix expr (e.g. SunOS 4.1.3)
# it is not.  I doubt that POSIX allows us to use \+ and assume it means
# (non-special) +, so here is another workaround
# Rumor has it this will be fixed in the
# next release of GNU expr after 1.12 (but we still have to cater to the old
# ones for some time because they are in many linux distributions).
PLUS='+'
if $EXPR 'a +b' : "a ${PLUS}b" >/dev/null; then
  : good, it works
else
  PLUS='\+'
fi

# Likewise, for ?
QUESTION='?'
if $EXPR 'a?b' : "a${QUESTION}b" >/dev/null; then
  : good, it works
else
  QUESTION='\?'
fi

# Now test the username to make sure it contains only valid characters
username=`$ID -un`
if $EXPR "${username}" : "${username}" >/dev/null; then
  : good, it works
else
  echo "Test suite does not work correctly when run by a username" >&2
  echo "containing regular expression meta-characters." >&2
  exit 1
fi

# Only 8 characters of $username appear in some output.
if test `echo $username |wc -c` -gt 8; then
  username8=`echo $username |sed 's/^\(........\).*/\1/'`
else
  username8=$username
fi

# Rarely, we need to match any username, not just the name of the user
# running this test.  This variable usually shouldn't be used.  $username
# contains the name of the user actually running this test.
#
# I believe this only ever actually gets compared to usernames created by this
# test.  It used to be compared to the username of the user running this test,
# but this hasn't been true for a long time.  Regardless, I tried to get the
# allowed character set right, based on a list in a private email from Mark
# Baushke, basically the allowed names from Linux systems (plus `.', which is
# only allowed on Gentoo Linux as of 2005-09-13).
anyusername="[_a-zA-Z0-9][-_.$a-zA-Z0-9]*"

# now make sure that tr works on NULs
tr_tooltest1 ()
{
tr=$1
if $EXPR `echo "123" | $tr '2' '\0'` : "123" >/dev/null 2>&1; then
  echo 'Warning: you are using a version of tr which does not correctly'
  echo 'handle NUL bytes.  Some tests may spuriously pass or fail.'
  echo 'You may wish to make sure GNU tr is in your path.'
  return 77
fi
# good, it works
return 0
}

TR=`find_tool ${TR}:gtr version_test tr_tooltest1`
echo "Using TR=$TR" >>$LOGFILE

# MacOS X (10.2.8) has a /bin/ls that does not work correctly in that
# it will return true even if the wildcard argument does not match any
# files.
ls_tooltest ()
{
ls=$1
# Force cleanup
if test -d $TESTDIR/ls-test; then
    chmod -R a+wx $TESTDIR/ls-test
    rm -rf $TESTDIR/ls-test
fi
if $ls $TESTDIR/ls-test >/dev/null 2>&1; then
  echo "Notice: \`$ls' is defective."
  echo 'This is a version of ls which does not correctly'
  echo 'return false for files that do not exist. Some tests may'
  echo 'spuriously pass or fail.'
  echo 'You may wish to put a an ls from GNU coreutils into your path.'
  return 77
else
  return 0
fi
}
LS=`find_tool ls:gls version_test ls_tooltest`
echo "Using LS=$LS" >>$LOGFILE

# Awk testing

awk_tooltest1 ()
{
awk=$1
$awk 'BEGIN {printf("one\ntwo\nthree\nfour\nfive\nsix")}' </dev/null >abc
if $EXPR "`cat abc`" : \
'one
two
three
four
five
six'; then
  rm abc
  return 0
else
  rm abc
  echo "Notice: awk BEGIN clause or printf is not be working properly."
  return 1
fi
}

# Format item %c check
awk_tooltest2 ()
{
awk=$1
$awk 'BEGIN { printf "%c%c%c", 2, 3, 4 }' </dev/null \
  | ${TR} '\002\003\004' '123' >abc
if $EXPR "`cat abc`" : "123" ; then
  : good, found it
else
  echo "Notice: awk format %c string may not be working properly."
  rm abc
  return 77
fi
rm abc
return 0
}

AWK=`find_tool gawk:nawk:awk version_test awk_tooltest1 awk_tooltest2`
echo "Using AWK=$AWK" >>$LOGFILE


###
### Functions used by tests.
###

# Execute a command on the repository, syncing when done if necessary.
#
# Syntax is as `eval'.
modify_repo ()
{
    eval "$*"
    if $proxy; then
	# And now resync the secondary.
	$TESTDIR/sync-secondary "repo modification" modify_repo ALL "$@"
    fi
}

# Restore changes to CVSROOT admin files.
restore_adm ()
{
    modify_repo rm -rf $CVSROOT_DIRNAME/CVSROOT
    modify_repo cp -Rp $TESTDIR/CVSROOT.save $CVSROOT_DIRNAME/CVSROOT
}

# Test that $RSYNC supports the options we need or try to find a
# replacement. If $RSYNC works or we replace it, and return 0.
# Otherwise, set $skipreason and return 77.
require_rsync ()
{
  rsyncworks=false
  # rsync is NOT a GNU tool, so do NOT use find_tool for name munging.
  for rsync in ${RSYNC} `Which -a rsync`;
  do

    if is_bad_tool `Which $rsync` ; then continue ; fi
    # Make some data to test rsync on.
    mkdir $TESTDIR/rsync-test
    mkdir $TESTDIR/rsync-test/Attic && touch $TESTDIR/rsync-test/Attic/6
    mkdir $TESTDIR/rsync-test/otherdir && touch $TESTDIR/rsync-test/otherdir/7
    for file in 1 2 3 4 5; do
      touch $TESTDIR/rsync-test/$file
    done
  
    if test -f "$rsync" && test -r "$rsync" \
      && $rsync -rglop --delete $TESTDIR/rsync-test/ $TESTDIR/rsync-test-copy \
  	      >/dev/null 2>&1 \
      && $rsync -rglop --delete --include Attic --exclude '*/' \
  	      $TESTDIR/rsync-test/ $TESTDIR/rsync-test-copy2 \
  	      >/dev/null 2>&1 \
      && test -f $TESTDIR/rsync-test/5 \
      && mv $TESTDIR/rsync-test/5 $TESTDIR/rsync-test/Attic/5 \
      && test -f $TESTDIR/rsync-test-copy/Attic/6 \
      && $rsync -rglop --delete $TESTDIR/rsync-test/ $TESTDIR/rsync-test-copy \
  	      >/dev/null 2>&1 \
      && $rsync -rglop --delete --include Attic --exclude '*/' \
  	      $TESTDIR/rsync-test/ $TESTDIR/rsync-test-copy2 \
  	      >/dev/null 2>&1 \
      && test ! -f $TESTDIR/rsync-test-copy/5 \
      && test ! -f $TESTDIR/rsync-test-copy2/5 \
      && test -f $TESTDIR/rsync-test-copy2/Attic/5 \
      && test ! -f $TESTDIR/rsync-test-copy2/otherdir/7
    then
      # good, it works
      rsyncworks=:
      RSYNC=$rsync
    else
      # Only use Which because of ${RSYNC} in the for loop.
      set_bad_tool `Which $rsync`
    fi
  
    rm -rf $TESTDIR/rsync-test $TESTDIR/rsync-test-copy \
       $TESTDIR/rsync-test-copy2

    if $rsyncworks; then
      return 0
    else
      (echo $rsync failed to work properly;\
       echo "$rsync --version"; $rsync --version) >>$LOGFILE 2>&1
    fi
  done

  unset RSYNC
  skipreason="unusable or no rsync found"
  return 77
}

# Test that $1 works as a remote shell.  If so, set $host, $CVS_RSH, &
# $save_CVS_RSH to match and return 0.  Otherwise, set $skipreason and return
# 77.
require_rsh ()
{
  host=${remotehost-"`hostname`"}
  result=`$1 $host 'echo test'`
  rc=$?
  if test $? != 0 || test "x$result" != "xtest"; then
    skipreason="\`$1 $host' failed rc=$rc result=$result"
    return 77
  fi

  save_CVS_RSH=$CVS_RSH
  CVS_RSH=$1; export CVS_RSH
  return 0
}

# Find a usable SSH.  When a usable ssh is found, set $host, $CVS_RSH, and
# $save_CVS_RSH and return 0.  Otherwise, set $skipreason and return 77.
require_ssh ()
{
  case "$CVS_RSH" in
    *ssh*|*putty*)
      tryssh=`Which $CVS_RSH`
      if [ ! -n "$tryssh" ]; then
	skipreason="Unable to find CVS_RSH=$CVS_RSH executable"
	return 77
      elif [ ! -x "$tryssh" ]; then
	skipreason="Unable to execute $tryssh program"
	return 77
      fi
      ;;
    *)
      # Look in the user's PATH for "ssh"
      tryssh=`Which ssh`
      if test ! -r "$tryssh"; then
	skipreason="Unable to find ssh program"
	return 77
      fi
      ;;
  esac

  require_rsh "$tryssh"
  return $?
}

pass ()
{
  echo "PASS: $1" >>${LOGFILE}
  passed=`expr $passed + 1`
}

# Like skip(), but don't fail when $skipfail is set.
skip_always ()
{
  echo "SKIP: $1${2+ ($2)}" >>$LOGFILE
  skipped=`expr $skipped + 1`
}

skip ()
{
  if $skipfail; then
    # exits
    fail "$1${2+ ($2)}"
  fi

  skip_always ${1+"$@"}
}

# Convenience function for skipping tests run only in remote mode.
remoteonly ()
{
  skip_always $1 "only tested in remote mode"
}

# Convenience function for skipping tests not run in proxy mode.
notproxy ()
{
  skip_always $1 "not tested in proxy mode"
}

# Convenience function for skipping tests not run in proxy mode.
notnoredirect ()
{
  skip_always $1 "not tested in proxy-noredirect mode"
}

warn ()
{
  if $skipfail; then
    fail "$1${2+ ($2)}"
  else
    echo "WARNING: $1${2+ ($2)}" >>$LOGFILE
  fi
  warnings=`expr $warnings + 1`
}

fail ()
{
  echo "FAIL: $1" | tee -a ${LOGFILE}
  echo "*** Please see the \`TESTS' and \`check.log' files for more information." >&2
  # This way the tester can go and see what remnants were left
  exit 1
}

verify_tmp_empty ()
{
  # Test our temp directory for cvs-serv* directories and cvsXXXXXX temp
  # files.  We would like to not leave any behind.
  if $remote && $LS $TMPDIR/cvs-serv* >/dev/null 2>&1; then
    # A true value means ls found files/directories with these names.
    # Give the server some time to finish, then retry.
    sleep 1
    if $LS $TMPDIR/cvs-serv* >/dev/null 2>&1; then
      warn "$1" "Found cvs-serv* directories in $TMPDIR."
      # The above will exit if $skipfail
      rm -rf $TMPDIR/cvs-serv*
    fi
  fi
  if $LS $TMPDIR/cvs?????? >/dev/null 2>&1; then
    # A true value means ls found files/directories with these names.
    warn "$1" "Found cvsXXXXXX temp files in $TMPDIR."
    # The above will exit if $skipfail
    rm -f ls $TMPDIR/cvs??????
  fi
}

# See dotest and dotest_fail for explanation (this is the parts
# of the implementation common to the two).
dotest_internal ()
{
  if $EXPR "`cat ${TESTDIR}/dotest.tmp`" : "$3${ENDANCHOR}" >/dev/null; then
    # Why, I hear you ask, do we write this to the logfile
    # even when the test passes?  The reason is that the test
    # may give us the regexp which we were supposed to match,
    # but sometimes it may be useful to look at the exact
    # text which was output.  For example, suppose one wants
    # to grep for a particular warning, and make _sure_ that
    # CVS never hits it (even in cases where the tests might
    # match it with .*).  Or suppose one wants to see the exact
    # date format output in a certain case (where the test will
    # surely use a somewhat non-specific pattern).
    cat ${TESTDIR}/dotest.tmp >>${LOGFILE}
    pass "$1"
    verify_tmp_empty "$1"
  # expr can't distinguish between "zero characters matched" and "no match",
  # so special-case it.
  elif test -z "$3" && test ! -s ${TESTDIR}/dotest.tmp; then
    pass "$1"
    verify_tmp_empty "$1"
  elif test x"$4" != x; then
    if $EXPR "`cat ${TESTDIR}/dotest.tmp`" : "$4${ENDANCHOR}" >/dev/null; then
      cat ${TESTDIR}/dotest.tmp >>${LOGFILE}
      pass "$1"
      verify_tmp_empty "$1"
    else
      echo "** expected: " >>${LOGFILE}
      echo "$3" >>${LOGFILE}
      echo "$3" > ${TESTDIR}/dotest.ex1
      echo "** or: " >>${LOGFILE}
      echo "$4" >>${LOGFILE}
      echo "$4" > ${TESTDIR}/dotest.ex2
      echo "** got: " >>${LOGFILE}
      cat ${TESTDIR}/dotest.tmp >>${LOGFILE}
      fail "$1"
    fi
  else
    echo "** expected: " >>${LOGFILE}
    echo "$3" >>${LOGFILE}
    echo "$3" > ${TESTDIR}/dotest.exp
    echo "** got: " >>${LOGFILE}
    cat ${TESTDIR}/dotest.tmp >>${LOGFILE}
    fail "$1"
  fi
}

dotest_all_in_one ()
{
  if $EXPR "`cat ${TESTDIR}/dotest.tmp`" : \
         "`cat ${TESTDIR}/dotest.exp`" >/dev/null; then
    return 0
  fi
  return 1
}

# WARNING: this won't work with REs that match newlines....
#
dotest_line_by_line ()
{
  line=1
  while [ $line -le `wc -l <${TESTDIR}/dotest.tmp` ] ; do
    if $EXPR "`sed -n ${line}p ${TESTDIR}/dotest.tmp`" : \
       "`sed -n ${line}p ${TESTDIR}/dotest.exp`" >/dev/null; then
      :
    elif test -z "`sed -n ${line}p ${TESTDIR}/dotest.tmp`" &&
       test -z "`sed -n ${line}p ${TESTDIR}/dotest.exp`"; then
      :
    else
      echo "Line $line:" >> ${LOGFILE}
      echo "**** expected: " >>${LOGFILE}
      sed -n ${line}p ${TESTDIR}/dotest.exp >>${LOGFILE}
      echo "**** got: " >>${LOGFILE}
      sed -n ${line}p ${TESTDIR}/dotest.tmp >>${LOGFILE}
      unset line
      return 1
    fi
    line=`expr $line + 1`
  done
  unset line
  return 0
}

# If you are having trouble telling which line of a multi-line
# expression is not being matched, replace calls to dotest_internal()
# with calls to this function:
#
dotest_internal_debug ()
{
  if test -z "$3"; then
    if test -s ${TESTDIR}/dotest.tmp; then
      echo "** expected: " >>${LOGFILE}
      echo "$3" >>${LOGFILE}
      echo "$3" > ${TESTDIR}/dotest.exp
      rm -f ${TESTDIR}/dotest.ex2
      echo "** got: " >>${LOGFILE}
      cat ${TESTDIR}/dotest.tmp >>${LOGFILE}
      fail "$1"
    else
      pass "$1"
      verify_tmp_empty "$1"
    fi
  else
    echo "$3" > ${TESTDIR}/dotest.exp
    if dotest_line_by_line "$1" "$2"; then
      pass "$1"
      verify_tmp_empty "$1"
    else
      if test x"$4" != x; then
	mv ${TESTDIR}/dotest.exp ${TESTDIR}/dotest.ex1
	echo "$4" > ${TESTDIR}/dotest.exp
	if dotest_line_by_line "$1" "$2"; then
	  pass "$1"
	  verify_tmp_empty "$1"
	else
	  mv ${TESTDIR}/dotest.exp ${TESTDIR}/dotest.ex2
	  echo "** expected: " >>${LOGFILE}
	  echo "$3" >>${LOGFILE}
	  echo "** or: " >>${LOGFILE}
	  echo "$4" >>${LOGFILE}
	  echo "** got: " >>${LOGFILE}
	  cat ${TESTDIR}/dotest.tmp >>${LOGFILE}
	  fail "$1"
	fi
      else
	echo "** expected: " >>${LOGFILE}
	echo "$3" >>${LOGFILE}
	echo "** got: " >>${LOGFILE}
	cat ${TESTDIR}/dotest.tmp >>${LOGFILE}
	fail "$1"
      fi
    fi
  fi
}

# This function allows the test output to be filtered before being verified.
# The dotest_* functions all call this function, which runs the command
# in the env var $TEST_FILTER on its argument if $TEST_FILTER is set.  If
# $TEST_FILTER is not set, this function does nothing.
#
# I found this primarily useful when running the test suite on a CVS
# executable linked with memory and function profilers which can generate
# spurious output.
run_filter ()
{
  if test -n "$TEST_FILTER"; then
    # Make sure there is an EOL
    echo >>$1
    sed '${/^$/d}' <$1 >$1.filter1
    # Run the filter
    eval "$TEST_FILTER" <$1.filter1 >$1.filter2
    diff -u $1 $1.filter2 \
	    >$1.diff
    mv $1.filter2 $1
    rm $1.filter1
  fi
}

maybe_sleep_if_ci_co_or_up ()
{
  if $waitforslowdisk; then
    case "$@" in
    *" ci "*|*" ci"|*" commit "*|*" commit") sleep 1;;
    *" co "*|*" co"|*" checkout "*|*" checkout") sleep 1;;
    *" up "*|*" up"|*" update "*|*" update") sleep 1;;
    esac
  fi
}

# Usage:
#  dotest TESTNAME COMMAND OUTPUT [OUTPUT2]
# TESTNAME is the name used in the log to identify the test.
# COMMAND is the command to run; for the test to pass, it exits with
# exitstatus zero.
# OUTPUT is a regexp which is compared against the output (stdout and
# stderr combined) from the test.  It is anchored to the start and end
# of the output, so should start or end with ".*" if that is what is desired.
# Trailing newlines are stripped from the command's actual output before
# matching against OUTPUT.
# If OUTPUT2 is specified and the output matches it, then it is also
# a pass (partial workaround for the fact that some versions of expr
# lack \|).
dotest ()
{
  maybe_sleep_if_ci_co_or_up "$2"
  rm -f $TESTDIR/dotest.ex? 2>&1
  eval "$2" >$TESTDIR/dotest.tmp 2>&1
  status=$?
  run_filter $TESTDIR/dotest.tmp
  if test "$status" != 0; then
    cat $TESTDIR/dotest.tmp >>$LOGFILE
    echo "exit status was $status" >>${LOGFILE}
    fail "$1"
  fi
  maybe_sleep_if_ci_co_or_up "$2"
  dotest_internal "$@"
}

# Like dotest except only 2 args and result must exactly match stdin
dotest_lit ()
{
  maybe_sleep_if_ci_co_or_up "$2"
  rm -f $TESTDIR/dotest.ex? 2>&1
  eval "$2" >$TESTDIR/dotest.tmp 2>&1
  status=$?
  run_filter $TESTDIR/dotest.tmp
  if test "$status" != 0; then
    cat $TESTDIR/dotest.tmp >>$LOGFILE
    echo "exit status was $status" >>$LOGFILE
    fail "$1"
  fi
  maybe_sleep_if_ci_co_or_up "$2"
  cat >$TESTDIR/dotest.exp
  if cmp $TESTDIR/dotest.exp $TESTDIR/dotest.tmp >/dev/null 2>&1; then
    pass "$1"
    verify_tmp_empty "$1"
  else
    echo "** expected: " >>$LOGFILE
    cat $TESTDIR/dotest.exp >>$LOGFILE
    echo "** got: " >>$LOGFILE
    cat $TESTDIR/dotest.tmp >>$LOGFILE
    fail "$1"
  fi
}

# Like dotest except exitstatus should be nonzero.
dotest_fail ()
{
  maybe_sleep_if_ci_co_or_up "$2"
  rm -f $TESTDIR/dotest.ex? 2>&1
  eval "$2" >$TESTDIR/dotest.tmp 2>&1
  status=$?
  run_filter $TESTDIR/dotest.tmp
  if test "$status" = 0; then
    cat $TESTDIR/dotest.tmp >>$LOGFILE
    echo "exit status was $status" >>$LOGFILE
    fail "$1"
  fi
  maybe_sleep_if_ci_co_or_up "$2"
  dotest_internal "$@"
}

# Like dotest except output is sorted.
dotest_sort ()
{
  maybe_sleep_if_ci_co_or_up "$2"
  rm -f $TESTDIR/dotest.ex? 2>&1
  eval "$2" >$TESTDIR/dotest.tmp1 2>&1
  status=$?
  run_filter $TESTDIR/dotest.tmp1
  if test "$status" != 0; then
    cat $TESTDIR/dotest.tmp1 >>$LOGFILE
    echo "exit status was $status" >>$LOGFILE
    fail "$1"
  fi
  $TR '	' ' ' < $TESTDIR/dotest.tmp1 | sort > $TESTDIR/dotest.tmp
  maybe_sleep_if_ci_co_or_up "$2"
  dotest_internal "$@"
}

# Like dotest_fail except output is sorted.
dotest_fail_sort ()
{
  maybe_sleep_if_ci_co_or_up "$2"
  rm -f $TESTDIR/dotest.ex? 2>&1
  eval "$2" >$TESTDIR/dotest.tmp1 2>&1
  status=$?
  run_filter $TESTDIR/dotest.tmp1
  if test "$status" = 0; then
    cat $TESTDIR/dotest.tmp1 >>$LOGFILE
    echo "exit status was $status" >>$LOGFILE
    fail "$1"
  fi
  $TR '	' ' ' < $TESTDIR/dotest.tmp1 | sort > $TESTDIR/dotest.tmp
  maybe_sleep_if_ci_co_or_up "$2"
  dotest_internal "$@"
}

# A function for fetching the timestamp of a revison of a file
getrlogdate () {
    ${testcvs} -n rlog -N ${1+"$@"} |
    while read token value; do
	case "$token" in
	date:)
	    echo $value | sed "s,;.*,,"
	    break;
            ;;
	esac
    done
}

# Avoid picking up any stray .cvsrc, etc., from the user running the tests
mkdir home
HOME=$TESTDIR/home; export HOME

# Make sure this variable is not defined to anything that would
# change the format of rcs dates.  Otherwise people using e.g.,
# RCSINIT=-zLT get lots of spurious failures.
RCSINIT=; export RCSINIT

# Remaining arguments are the names of tests to run.
#
# The testsuite is broken up into (hopefully manageably-sized)
# independently runnable tests, so that one can quickly get a result
# from a cvs or testsuite change, and to facilitate understanding the
# tests.

if test x"$*" = x; then
	# Basic/miscellaneous functionality
	tests="version basica basicb basicc basic1 deep basic2 ls"
	tests="$tests parseroot parseroot2 parseroot3 files spacefiles"
	tests="${tests} commit-readonly commit-add-missing"
	tests="${tests} status"
	# Branching, tagging, removing, adding, multiple directories
	tests="${tests} rdiff rdiff-short"
	tests="${tests} rdiff2 diff diffnl death death2"
	tests="${tests} rm-update-message rmadd rmadd2 rmadd3 resurrection"
	tests="${tests} dirs dirs2 branches branches2 branches3"
	tests="${tests} branches4 tagc tagf tag-space"
	tests="${tests} rcslib multibranch import importb importc importX"
	tests="$tests importX2 import-CVS import-quirks"
	tests="${tests} update-p import-after-initial branch-after-import"
	tests="${tests} join join2 join3 join4 join5 join6 join7"
	tests="${tests} join-readonly-conflict join-admin join-admin-2"
	tests="${tests} join-rm"
	tests="${tests} new newb conflicts conflicts2 conflicts3"
	tests="${tests} clean"
	tests="${tests} keywordexpand"
	# Checking out various places (modules, checkout -d, &c)
	tests="${tests} modules modules2 modules3 modules4 modules5 modules6"
	tests="${tests} modules7 mkmodules co-d"
	tests="${tests} cvsadm emptydir abspath abspath2 toplevel toplevel2"
        tests="${tests} rstar-toplevel trailingslashes checkout_repository"
	# Log messages, error messages.
	tests="${tests} mflag editor env errmsg1 errmsg2 adderrmsg opterrmsg"
	tests="${tests} errmsg3"
	tests="${tests} close-stdout"
	tests="$tests debug-log-nonfatal"
	# Watches, binary files, history browsing, &c.
	tests="${tests} devcom devcom2 devcom3 watch4 watch5 watch6-0 watch6"
        tests="${tests} edit-check"
	tests="${tests} unedit-without-baserev"
	tests="${tests} ignore ignore-on-branch binfiles binfiles2 binfiles3"
	tests="${tests} mcopy binwrap binwrap2"
	tests="${tests} binwrap3 mwrap info taginfo posttag"
	tests="$tests config config2 config3 config4"
	tests="${tests} serverpatch log log2 logopt ann ann-id"
	# Repository Storage (RCS file format, CVS lock files, creating
	# a repository without "cvs init", &c).
	tests="${tests} crerepos rcs rcs2 rcs3 rcs4 rcs5"
	tests="$tests lockfiles backuprecover"
	tests="${tests} sshstdio"
	# More history browsing, &c.
	tests="${tests} history"
	tests="${tests} big modes modes2 modes3 stamps"
	# PreservePermissions stuff: permissions, symlinks et al.
	# tests="${tests} perms symlinks symlinks2 hardlinks"
	# More tag and branch tests, keywords.
	tests="${tests} sticky keyword keywordlog keywordname keyword2"
	tests="${tests} head tagdate multibranch2 tag8k"
	# "cvs admin", reserved checkouts.
	tests="${tests} admin reserved"
	# Nuts and bolts of diffing/merging (diff library, &c)
	tests="${tests} diffmerge1 diffmerge2"
	# Release of multiple directories
	tests="${tests} release"
	tests="${tests} recase"
	# Multiple root directories and low-level protocol tests.
	tests="${tests} multiroot multiroot2 multiroot3 multiroot4"
	tests="${tests} rmroot reposmv pserver server server2 client"
	tests="${tests} dottedroot fork commit-d template"
	tests="${tests} writeproxy writeproxy-noredirect writeproxy-ssh"
	tests="${tests} writeproxy-ssh-noredirect"
else
	tests="$*"
fi

# Now check the -f argument for validity.
if test -n "$fromtest"; then
	# Don't allow spaces - they are our delimiters in tests
	count=0
	for sub in $fromtest; do
	  count=`expr $count + 1`
	done
	if test $count != 1; then
		echo "No such test \`$fromtest'." >&2
		exit 2
	fi
	# make sure it is in $tests
	case " $tests " in
		*" $fromtest "*)
			;;
		*)
			echo "No such test \`$fromtest'." >&2
			exit 2
			;;
	esac
fi



# a simple function to compare directory contents
#
# Returns: 0 for same, 1 for different
#
directory_cmp ()
{
	OLDPWD=`pwd`
	DIR_1=$1
	DIR_2=$2

	cd $DIR_1
	find . -print | fgrep -v /CVS | sort > $TESTDIR/dc$$d1

	# go back where we were to avoid symlink hell...
	cd $OLDPWD
	cd $DIR_2
	find . -print | fgrep -v /CVS | sort > $TESTDIR/dc$$d2

	if diff $TESTDIR/dc$$d1 $TESTDIR/dc$$d2 >/dev/null 2>&1
	then
		:
	else
		return 1
	fi
	cd $OLDPWD
	while read a
	do
		if test -f $DIR_1/"$a" ; then
			cmp -s $DIR_1/"$a" $DIR_2/"$a"
			if test $? -ne 0 ; then
				return 1
			fi
		fi
	done < $TESTDIR/dc$$d1
	rm -f $TESTDIR/dc$$*
	return 0
}



#
# The following 4 functions are used by the diffmerge1 test case.  They set up,
# respectively, the four versions of the files necessary:
#
#	1.  Ancestor revisions.
#	2.  "Your" changes.
#	3.  "My" changes.
#	4.  Expected merge result.
#

# Create ancestor revisions for diffmerge1
diffmerge_create_older_files() {
	  # This test case was supplied by Noah Friedman:
	  cat >testcase01 <<EOF
// Button.java

package random.application;

import random.util.*;

public class Button
{
  /* Instantiates a Button with origin (0, 0) and zero width and height.
   * You must call an initializer method to properly initialize the Button.
   */
  public Button ()
  {
    super ();

    _titleColor = Color.black;
    _disabledTitleColor = Color.gray;
    _titleFont = Font.defaultFont ();
  }

  /* Convenience constructor for instantiating a Button with
   * bounds x, y, width, and height.  Equivalent to
   *     foo = new Button ();
   *     foo.init (x, y, width, height);
   */
  public Button (int x, int y, int width, int height)
  {
    this ();
    init (x, y, width, height);
  }
}
EOF

	  # This test case was supplied by Jacob Burckhardt:
	  cat >testcase02 <<EOF
a
a
a
a
a
EOF

	  # This test case was supplied by Karl Tomlinson who also wrote the
	  # patch which lets CVS correctly handle this and several other cases:
	  cat >testcase03 <<EOF
x
s
a
b
s
y
EOF

	  # This test case was supplied by Karl Tomlinson:
	  cat >testcase04 <<EOF
s
x
m
m
x
s
v
s
x
m
m
x
s
EOF

	  # This test case was supplied by Karl Tomlinson:
	  cat >testcase05 <<EOF
s
x
m
m
x
x
x
x
x
x
x
x
x
x
s
s
s
s
s
s
s
s
s
s
v
EOF

	  # This test case was supplied by Jacob Burckhardt:
	  cat >testcase06 <<EOF
g











i
EOF

	  # This test is supposed to verify that the horizon lines are the same
	  # for both 2-way diffs, but unfortunately, it does not fail with the
	  # old version of cvs.  However, Karl Tomlinson still thought it would
	  # be good to test it anyway:
	  cat >testcase07 <<EOF
h
f









g
r



i










i
EOF

	  # This test case was supplied by Jacob Burckhardt:
	  cat >testcase08 <<EOF
Both changes move this line to the end of the file.

no
changes
here

First change will delete this line.

First change will also delete this line.

    no
    changes
    here

Second change will change it here.

        no
        changes
        here
EOF

	  # This test case was supplied by Jacob Burckhardt.  Note that I do not
	  # think cvs has ever failed with this case, but I include it anyway,
	  # since I think it is a hard case.  It is hard because Peter Miller's
	  # fmerge utility fails on it:
	  cat >testcase09 <<EOF
m
a
{
}
b
{
}
EOF

	  # This test case was supplied by Martin Dorey and simplified by Jacob
	  # Burckhardt:
	  cat >testcase10 <<EOF

    petRpY ( MtatRk );
    fV ( MtatRk != Zy ) UDTXUK_DUUZU ( BGKT_ZFDK_qjT_HGTG );

    MtatRk = MQfr_GttpfIRte_MtpeaL ( &acI, jfle_Uecopd_KRLIep * jfle_Uecopd_MfJe_fY_nEtek );
    OjZy MtatRk = Uead_GttpfIRte_MtpeaL ( &acI, jfle_Uecopd_MfJe_fY_nEtek, nRVVep );

    Bloke_GttpfIRte_MtpeaL ( &acI );
MTGTXM Uead_Ktz_qjT_jfle_Uecopd ( fYt Y, uofd *nRVVep )
{
    fV ( Y < 16 )
    {
        petRpY ( Uead_Mectopk ( noot_Uecopd.qVtHatabcY0 * noot_Uecopd.MectopkFepBlRktep +
                                                      Y * jfle_Uecopd_MfJe_fY_Mectopk,
                                jfle_Uecopd_MfJe_fY_Mectopk,
                                nRVVep ) );
    }
    elke
    {
        petRpY ( Uead_Mectopk ( noot_Uecopd.qVtqfppHatabcY0 * noot_Uecopd.MectopkFepBlRktep +
                                                 ( Y - 16 ) * jfle_Uecopd_MfJe_fY_Mectopk,
                                jfle_Uecopd_MfJe_fY_Mectopk,
                                nRVVep ) );
    }

}


/****************************************************************************
*                                                                           *
*   Uead Mectopk ( Uelatfue to tze cRppeYt raptftfoY )                      *
*                                                                           *
****************************************************************************/

MTGTXM Uead_Mectopk ( RfYt64 Mtapt_Mectop, RfYt64 KRL_Mectopk, uofd *nRVVep )
{
MTGTXM MtatRk = Zy;

    MtatRk = Uead_HfkQ ( FaptftfoY_TaIle.Uelatfue_Mectop + Mtapt_Mectop, KRL_Mectopk, nRVVep );

    petRpY ( MtatRk );

}
    HfkQipfte ( waYdle,                 /*  waYdle                         */
                waYdleFok,              /*  ZVVket VpoL ktapt oV dfkQ      */
                (coYkt RfYt8*) nRVVep,  /*  nRVVep                         */
                0,                      /*  MRrepVlRoRk KfxoYfkL           */
                beYgtz                  /*  nEtek to Apfte                 */
              );

    petRpY ( Zy );
}
EOF
}

# Create "your" revisions for diffmerge1
diffmerge_create_your_files() {
	  # remove the Button() method
	  cat >testcase01 <<\EOF
// Button.java

package random.application;

import random.util.*;

public class Button
{
  /* Instantiates a Button with origin (0, 0) and zero width and height.
   * You must call an initializer method to properly initialize the Button.
   */
  public Button ()
  {
    super ();

    _titleColor = Color.black;
    _disabledTitleColor = Color.gray;
    _titleFont = Font.defaultFont ();
  }
}
EOF

	  cat >testcase02 <<\EOF
y
a
a
a
a
EOF

	  cat >testcase03 <<\EOF
x
s
a
b
s
b
s
y
EOF

	  cat >testcase04 <<\EOF
s
m
s
v
s
m
s
EOF

	  cat >testcase05 <<\EOF
v
s
m
s
s
s
s
s
s
s
s
s
s
v
EOF

	  # Test case 6 and test case 7 both use the same input files, but they
	  # order the input files differently.  In one case, a certain file is
	  # used as the older file, but in the other test case, that same file
	  # is used as the file which has changes.  I could have put echo
	  # commands here, but since the echo lines would be the same as those
	  # in the previous function, I decided to save space and avoid repeating
	  # several lines of code.  Instead, I merely swap the files:
	  mv testcase07 tmp
	  mv testcase06 testcase07
	  mv tmp testcase06

	  # Make the date newer so that cvs thinks that the files are changed:
	  touch testcase06 testcase07

	  cat >testcase08 <<\EOF
no
changes
here

First change has now added this in.

    no
    changes
    here

Second change will change it here.

        no
        changes
        here

Both changes move this line to the end of the file.
EOF

	  cat >testcase09 <<\EOF

m
a
{
}
b
{
}
c
{
}
EOF

	  cat >testcase10 <<\EOF

    fV ( BzQkV_URYYfYg ) (*jfle_Uecopdk)[0].jfle_Uecopd_KRLIep = ZpfgfYal_jUK;

    petRpY ( MtatRk );
    fV ( MtatRk != Zy ) UDTXUK_DUUZU ( BGKT_ZFDK_qjT_HGTG );

    fV ( jfle_Uecopd_KRLIep < 16 )
    {
        MtatRk = Uead_Ktz_qjT_jfle_Uecopd ( jfle_Uecopd_KRLIep, (uofd*)nRVVep );
    }
    elke
    {
        MtatRk = ZreY_GttpfIRte_MtpeaL ( qjT_jfle_Uecopdk, qjT_jfle_Uecopd_BoRYt, HGTG_TvFD, KXbb, KXbb, &acI );
        fV ( MtatRk != Zy ) UDTXUK_DUUZU ( BGKT_ZFDK_qjT_HGTG );

        MtatRk = MQfr_GttpfIRte_MtpeaL ( &acI, jfle_Uecopd_KRLIep * jfle_Uecopd_MfJe_fY_nEtek );
        OjZy MtatRk = Uead_GttpfIRte_MtpeaL ( &acI, jfle_Uecopd_MfJe_fY_nEtek, nRVVep );

    Bloke_GttpfIRte_MtpeaL ( &acI );
MTGTXM Uead_Ktz_qjT_jfle_Uecopd ( fYt Y, uofd *nRVVep )
{
MTGTXM MtatRk = Zy;

    fV ( Y < 16 )
    {
        petRpY ( Uead_Mectopk ( noot_Uecopd.qVtHatabcY0 * noot_Uecopd.MectopkFepBlRktep +
                                                      Y * jfle_Uecopd_MfJe_fY_Mectopk,
                                jfle_Uecopd_MfJe_fY_Mectopk,
                                nRVVep ) );
    }
    elke
    {
        petRpY ( Uead_Mectopk ( noot_Uecopd.qVtqfppHatabcY0 * noot_Uecopd.MectopkFepBlRktep +
                                                 ( Y - 16 ) * jfle_Uecopd_MfJe_fY_Mectopk,
                                jfle_Uecopd_MfJe_fY_Mectopk,
                                nRVVep ) );
    }

    petRpY ( MtatRk );

}


/****************************************************************************
*                                                                           *
*   Uead Mectopk ( Uelatfue to tze cRppeYt raptftfoY )                      *
*                                                                           *
****************************************************************************/

MTGTXM Uead_Mectopk ( RfYt64 Mtapt_Mectop, RfYt64 KRL_Mectopk, uofd *nRVVep )
{
MTGTXM MtatRk = Zy;

    MtatRk = Uead_HfkQ ( FaptftfoY_TaIle.Uelatfue_Mectop + Mtapt_Mectop, KRL_Mectopk, nRVVep );

    petRpY ( MtatRk );

}
    HfkQipfte ( waYdle,                 /*  waYdle                         */
                waYdleFok,              /*  ZVVket VpoL ktapt oV dfkQ      */
                (coYkt RfYt8*) nRVVep,  /*  nRVVep                         */
                0,                      /*  MRrepVlRoRk KfxoYfkL           */
                beYgtz                  /*  nEtek to Apfte                 */
              );

    petRpY ( Zy );
}

EOF
}

# Create "my" revisions for diffmerge1
diffmerge_create_my_files() {
          # My working copy still has the Button() method, but I
	  # comment out some code at the top of the class.
	  cat >testcase01 <<\EOF
// Button.java

package random.application;

import random.util.*;

public class Button
{
  /* Instantiates a Button with origin (0, 0) and zero width and height.
   * You must call an initializer method to properly initialize the Button.
   */
  public Button ()
  {
    super ();

    // _titleColor = Color.black;
    // _disabledTitleColor = Color.gray;
    // _titleFont = Font.defaultFont ();
  }

  /* Convenience constructor for instantiating a Button with
   * bounds x, y, width, and height.  Equivalent to
   *     foo = new Button ();
   *     foo.init (x, y, width, height);
   */
  public Button (int x, int y, int width, int height)
  {
    this ();
    init (x, y, width, height);
  }
}
EOF

	  cat >testcase02 <<\EOF
a
a
a
a
m
EOF

	  cat >testcase03 <<\EOF
x
s
c
s
b
s
y
EOF

	  cat >testcase04 <<\EOF
v
s
x
m
m
x
s
v
s
x
m
m
x
s
v
EOF

	  # Note that in test case 5, there are no changes in the "mine"
	  # section, which explains why there is no command here which writes to
	  # file testcase05.

	  # no changes for testcase06

	  # The two branches make the same changes:
	  cp ../yours/testcase07 .

	  cat >testcase08 <<\EOF
no
changes
here

First change will delete this line.

First change will also delete this line.

    no
    changes
    here

Second change has now changed it here.

        no
        changes
        here

Both changes move this line to the end of the file.
EOF

	  cat >testcase09 <<\EOF
m
a
{
}
b
{
}
c
{
}
EOF

	  cat >testcase10 <<\EOF

    petRpY ( MtatRk );
    fV ( MtatRk != Zy ) UDTXUK_DUUZU ( BGKT_ZFDK_qjT_HGTG );

    MtatRk = MQfr_GttpfIRte_MtpeaL ( &acI, jfle_Uecopd_KRLIep * jfle_Uecopd_MfJe_fY_nEtek );
    OjZy MtatRk = Uead_GttpfIRte_MtpeaL ( &acI, jfle_Uecopd_MfJe_fY_nEtek, nRVVep );

    Bloke_GttpfIRte_MtpeaL ( &acI );
MTGTXM Uead_Ktz_qjT_jfle_Uecopd ( fYt Y, uofd *nRVVep )
{
    fV ( Y < 16 )
    {
        petRpY ( Uead_Mectopk ( noot_Uecopd.qVtHatabcY0 * noot_Uecopd.MectopkFepBlRktep +
                                                      Y * jfle_Uecopd_MfJe_fY_Mectopk,
                                jfle_Uecopd_MfJe_fY_Mectopk,
                                nRVVep ) );
    }
    elke
    {
        petRpY ( Uead_Mectopk ( noot_Uecopd.qVtqfppHatabcY0 * noot_Uecopd.MectopkFepBlRktep +
                                                 ( Y - 16 ) * jfle_Uecopd_MfJe_fY_Mectopk,
                                jfle_Uecopd_MfJe_fY_Mectopk,
                                nRVVep ) );
    }

}


/****************************************************************************
*                                                                           *
*   Uead Mectopk ( Uelatfue to tze cRppeYt raptftfoY )                      *
*                                                                           *
****************************************************************************/

MTGTXM Uead_Mectopk ( RfYt64 Mtapt_Mectop, RfYt64 KRL_Mectopk, uofd *nRVVep )
{
MTGTXM MtatRk = Zy;

    MtatRk = Uead_HfkQ ( FaptftfoY_TaIle.Uelatfue_Mectop + Mtapt_Mectop, KRL_Mectopk, nRVVep );

    petRpY ( MtatRk );

}
    HfkQipfte ( waYdle,                 /*  waYdle                         */
                waYdleFok,              /*  ZVVket VpoL ktapt oV dfkQ      */
                (coYkt RfYt8*) nRVVep,  /*  nRVVep                         */
                beYgtz                  /*  nEtek to Apfte                 */
              );

    petRpY ( Zy );
}

EOF
}

# Create expected results of merge for diffmerge1
diffmerge_create_expected_files() {
	  cat >testcase01 <<\EOF
// Button.java

package random.application;

import random.util.*;

public class Button
{
  /* Instantiates a Button with origin (0, 0) and zero width and height.
   * You must call an initializer method to properly initialize the Button.
   */
  public Button ()
  {
    super ();

    // _titleColor = Color.black;
    // _disabledTitleColor = Color.gray;
    // _titleFont = Font.defaultFont ();
  }
}
EOF

	  cat >testcase02 <<\EOF
y
a
a
a
m
EOF

	  cat >testcase03 <<\EOF
x
s
c
s
b
s
b
s
y
EOF

	  cat >testcase04 <<\EOF
v
s
m
s
v
s
m
s
v
EOF

	  # Since there are no changes in the "mine" section, just take exactly
	  # the version in the "yours" section:
	  cp ../yours/testcase05 .

	  cp ../yours/testcase06 .

	  # Since the two branches make the same changes, the result should be
	  # the same as both branches.  Here, I happen to pick yours to copy from,
	  # but I could have also picked mine, since the source of the copy is
	  # the same in either case.  However, the mine has already been
	  # altered by the update command, so don't use it.  Instead, use the
	  # yours section which has not had an update on it and so is unchanged:
	  cp ../yours/testcase07 .

	  cat >testcase08 <<\EOF
no
changes
here

First change has now added this in.

    no
    changes
    here

Second change has now changed it here.

        no
        changes
        here

Both changes move this line to the end of the file.
EOF

	  cat >testcase09 <<\EOF

m
a
{
}
b
{
}
c
{
}
EOF

	  cat >testcase10 <<\EOF

    fV ( BzQkV_URYYfYg ) (*jfle_Uecopdk)[0].jfle_Uecopd_KRLIep = ZpfgfYal_jUK;

    petRpY ( MtatRk );
    fV ( MtatRk != Zy ) UDTXUK_DUUZU ( BGKT_ZFDK_qjT_HGTG );

    fV ( jfle_Uecopd_KRLIep < 16 )
    {
        MtatRk = Uead_Ktz_qjT_jfle_Uecopd ( jfle_Uecopd_KRLIep, (uofd*)nRVVep );
    }
    elke
    {
        MtatRk = ZreY_GttpfIRte_MtpeaL ( qjT_jfle_Uecopdk, qjT_jfle_Uecopd_BoRYt, HGTG_TvFD, KXbb, KXbb, &acI );
        fV ( MtatRk != Zy ) UDTXUK_DUUZU ( BGKT_ZFDK_qjT_HGTG );

        MtatRk = MQfr_GttpfIRte_MtpeaL ( &acI, jfle_Uecopd_KRLIep * jfle_Uecopd_MfJe_fY_nEtek );
        OjZy MtatRk = Uead_GttpfIRte_MtpeaL ( &acI, jfle_Uecopd_MfJe_fY_nEtek, nRVVep );

    Bloke_GttpfIRte_MtpeaL ( &acI );
MTGTXM Uead_Ktz_qjT_jfle_Uecopd ( fYt Y, uofd *nRVVep )
{
MTGTXM MtatRk = Zy;

    fV ( Y < 16 )
    {
        petRpY ( Uead_Mectopk ( noot_Uecopd.qVtHatabcY0 * noot_Uecopd.MectopkFepBlRktep +
                                                      Y * jfle_Uecopd_MfJe_fY_Mectopk,
                                jfle_Uecopd_MfJe_fY_Mectopk,
                                nRVVep ) );
    }
    elke
    {
        petRpY ( Uead_Mectopk ( noot_Uecopd.qVtqfppHatabcY0 * noot_Uecopd.MectopkFepBlRktep +
                                                 ( Y - 16 ) * jfle_Uecopd_MfJe_fY_Mectopk,
                                jfle_Uecopd_MfJe_fY_Mectopk,
                                nRVVep ) );
    }

    petRpY ( MtatRk );

}


/****************************************************************************
*                                                                           *
*   Uead Mectopk ( Uelatfue to tze cRppeYt raptftfoY )                      *
*                                                                           *
****************************************************************************/

MTGTXM Uead_Mectopk ( RfYt64 Mtapt_Mectop, RfYt64 KRL_Mectopk, uofd *nRVVep )
{
MTGTXM MtatRk = Zy;

    MtatRk = Uead_HfkQ ( FaptftfoY_TaIle.Uelatfue_Mectop + Mtapt_Mectop, KRL_Mectopk, nRVVep );

    petRpY ( MtatRk );

}
    HfkQipfte ( waYdle,                 /*  waYdle                         */
                waYdleFok,              /*  ZVVket VpoL ktapt oV dfkQ      */
                (coYkt RfYt8*) nRVVep,  /*  nRVVep                         */
                beYgtz                  /*  nEtek to Apfte                 */
              );

    petRpY ( Zy );
}

EOF
}



# Echo a new CVSROOT based on $1, $remote, and $remotehost
newroot() {
  if $remote; then
    if test -n "$remotehost"; then
      echo :ext$rootoptions:$remotehost$1
    else
      echo :fork$rootoptions:$1
    fi
  else
    echo $1
  fi
}



# Set up CVSROOT (the crerepos tests will test operating without CVSROOT set).
#
# Currently we test :fork: and :ext: (see crerepos test).  There is a
# known difference between the two in modes-15 (see comments there).
#
# :ext: can be tested against a remote machine if:
#
#    1. $remotehost is set using the `-h' option to this script.
#    2. ${CVS_RSH=rsh} $remotehost works.
#    3. The path to $TESTDIR is the same on both machines (symlinks are okay)
#    4. The path to $testcvs is the same on both machines (symlinks are okay)
#       or $CVS_SERVER is overridden in this script's environment to point to
#       a working CVS exectuable on the remote machine.
#
# Testing :pserver: would be hard (inetd issues).  (How about using tcpserver
# and some high port number?  DRP)

if $linkroot; then
    mkdir ${TESTDIR}/realcvsroot
    ln -s realcvsroot ${TESTDIR}/cvsroot
fi
CVSROOT_DIRNAME=${TESTDIR}/cvsroot
CVSROOT=`newroot $CVSROOT_DIRNAME`; export CVSROOT



###
### Initialize the repository
###
dotest init-1 "$testcvs init"

# Now hide the primary root behind a secondary if requested.
if $proxy; then
    # Save the primary root.
    PRIMARY_CVSROOT=$CVSROOT
    PRIMARY_CVSROOT_DIRNAME=$CVSROOT_DIRNAME
    # Where the secondary root will be
    SECONDARY_CVSROOT_DIRNAME=$TESTDIR/secondary_cvsroot
    if $noredirect; then
	rootoptions=";Redirect=no"
	SECONDARY_CVSROOT=`newroot $PRIMARY_CVSROOT_DIRNAME`
    else
	SECONDARY_CVSROOT=`newroot $SECONDARY_CVSROOT_DIRNAME`
    fi
    # Now set the global CVSROOT to use the secondary.
    CVSROOT=$SECONDARY_CVSROOT; export CVSROOT

    require_rsync
    if test $? -eq 77; then
	echo "Unable to test in proxy mode: $skipreason" >&2
	skip all "missing or broken rsync command."
	exit 0
    fi

    if $noredirect; then
	# Wrap the CVS server to allow --primary-root to be set by the
	# secondary.
	cat <<EOF >$TESTDIR/secondary-wrapper
#! $TESTSHELL
CVS_SERVER=$TESTDIR/primary-wrapper
export CVS_SERVER

# No need to check the PID of the last client since we are testing with
# Redirect disabled.
proot_arg="--allow-root=$SECONDARY_CVSROOT_DIRNAME"
exec $CVS_SERVER \$proot_arg "\$@"
EOF
	cat <<EOF >$TESTDIR/primary-wrapper
#! $TESTSHELL
if test -n "$CVS_SERVER_LOG"; then
  CVS_SERVER_LOG=`dirname "$CVS_SERVER_LOG"`/cvsprimarylog
  export CVS_SERVER_LOG
fi
exec $CVS_SERVER "\$@"
EOF

	CVS_SERVER_secondary=$TESTDIR/secondary-wrapper
	CVS_SERVER=$CVS_SERVER_secondary

	chmod a+x $TESTDIR/secondary-wrapper \
	          $TESTDIR/primary-wrapper
    fi

    # Script to sync the secondary root.
    cat >$TESTDIR/sync-secondary <<EOF
#! $TESTSHELL
# date >>$TESTDIR/update-log

ps=\$1
cmd=\$2
dir=\$3
shift
shift
shift

# echo "updating from \$ps for command \\\`\$cmd' in dir \\\`\$dir'" \${1+"\$@"} \\
#      >>$TESTDIR/update-log

# If multiple CVS executables could attempt to access the repository, we would
# Need to lock for this sync and sleep
case "\$dir" in
  ALL)
    # This is a hack to allow a few of the tests to play with the
    # UseNewInfoFmtStrings key in CVSROOT/config.  It's inefficient, but there
    # aren't many tests than need it and the alternative is an awful lot of
    # special casing.
    $RSYNC -rglop --delete --exclude '#cvs.*' \\
           $PRIMARY_CVSROOT_DIRNAME/ \\
           $SECONDARY_CVSROOT_DIRNAME
    ;;

  *)
    # For the majority of the tests we will only sync the directories that
    # were written to.
    case "\$cmd" in
      add|import)
	# For \`add', we need a recursive update due to quirks in rsync syntax,
	# but it shouldn't affect efficiency since any new dir should be empty.
	#
	# For \`import', a recursive update is necessary since subdirs may have
	# been added underneath the root dir we were passed. 
        $RSYNC -rglop \\
	       $PRIMARY_CVSROOT_DIRNAME/"\$dir" \\
	       $SECONDARY_CVSROOT_DIRNAME/\`dirname -- "\$dir"\`
        ;;

      tag)
	# \`tag' may have changed CVSROOT/val-tags too.
        $RSYNC -glop \\
               $PRIMARY_CVSROOT_DIRNAME/CVSROOT/val-tags \\
               $SECONDARY_CVSROOT_DIRNAME/CVSROOT
	# Otherwise it is identical to other write commands.
        $RSYNC -rglop --delete \\
               --include Attic --include CVS \
               --exclude '#cvs.*' --exclude '*/' \\
               $PRIMARY_CVSROOT_DIRNAME/"\$dir"/ \\
               $SECONDARY_CVSROOT_DIRNAME/"\$dir"
        ;;

      *)
	# By default, sync just what changed.
        $RSYNC -rglop --delete \\
               --include Attic --include CVS \
               --exclude '#cvs.*' --exclude '*/' \\
               $PRIMARY_CVSROOT_DIRNAME/"\$dir"/ \\
               $SECONDARY_CVSROOT_DIRNAME/"\$dir"
        ;;
    esac # \$cmd

    # And keep the history file up to date for all commands.
    $RSYNC -glop \\
           $PRIMARY_CVSROOT_DIRNAME/CVSROOT/history \\
           $SECONDARY_CVSROOT_DIRNAME/CVSROOT
    ;; # \$dir = *
esac # \$dir

# Avoid timestamp comparison issues with rsync.
sleep 1
EOF
    chmod a+x $TESTDIR/sync-secondary

    # And now init the secondary.
    $TESTDIR/sync-secondary "- no, before - create secondary root" \
                            sanity-setup ALL

    # Initialize the primary repository
    mkdir proxy-init; cd proxy-init
    dotest proxy-init-1 "$testcvs -Qd$PRIMARY_CVSROOT co CVSROOT"
    cd CVSROOT
    cat >>config <<EOF
PrimaryServer=$PRIMARY_CVSROOT
EOF
    cat >>loginfo <<EOF
ALL $TESTDIR/sync-secondary loginfo %c %p %{sVv}
EOF
    cat >>postadmin <<EOF
ALL $TESTDIR/sync-secondary postadmin %c %p
EOF
    cat >>posttag <<EOF
ALL $TESTDIR/sync-secondary posttag %c %p %o %b %t %{sVv}
EOF
    cat >>postwatch <<EOF
ALL $TESTDIR/sync-secondary postwatch %c %p
EOF
    dotest proxy-init-2 \
"$testcvs -Q ci -mconfigure-writeproxy"

    # Save these files for later reference
    cp config $TESTDIR/config-clean
    cp loginfo $TESTDIR/loginfo-clean
    cp postadmin $TESTDIR/postadmin-clean
    cp posttag $TESTDIR/posttag-clean
    cp postwatch $TESTDIR/postwatch-clean

    # done in here
    cd ../..
    rm -rf proxy-init
else # !$proxy
    # Set this even when not testing $proxy to match messages, like $SPROG.
    SECONDARY_CVSROOT_DIRNAME=$CVSROOT_DIRNAME
fi # $proxy

# Save a copy of the initial repository so that it may be restored after the
# tests that alter it.
cp -Rp $CVSROOT_DIRNAME/CVSROOT $TESTDIR/CVSROOT.save


###
### The tests
###
dotest init-2 "$testcvs init"



###
### The big loop
###
for what in $tests; do
	if test -n "$fromtest" ; then
	    if test $fromtest = $what ; then
		unset fromtest
	    else
		continue
	    fi
	fi
	case $what in

	version)
	  # We've had cases where the version command started dumping core,
	  # so we might as well test it
	  dotest version-1 "${testcvs} --version" \
'
Concurrent Versions System (CVS) [0-9.]*.*with CVSACL Patch [0-9.]*.*

Copyright (C) [0-9]* Free Software Foundation, Inc.

Senior active maintainers include Larry Jones, Derek R. Price,
and Mark D. Baushke.  Please see the AUTHORS and README files from the CVS
distribution kit for a complete list of contributors and copyrights.

CVS may be copied only under the terms of the GNU General Public License,
a copy of which can be found with the CVS distribution kit.

Specify the --help option for further information about CVS'

# Maybe someday...
#	  if $proxy; then
#		dotest version-2r "${testcvs} version" \
#'Client: Concurrent Versions System (CVS) [0-9p.]* (client.*)
#Server: Concurrent Versions System (CVS) [0-9p.]* (.*server)
#Secondary Server: Concurrent Versions System (CVS) [0-9p.]* (.*server)'
	  if $remote; then
		dotest version-2r "${testcvs} version" \
'Client: Concurrent Versions System (CVS) [0-9p.]* (client.*)
with CVSACL Patch [0-9p.]* (.*)
Server: Concurrent Versions System (CVS) [0-9p.]* (.*server)
with CVSACL Patch [0-9p.]* (.*)'
	  else
		dotest version-2 "${testcvs} version" \
'Concurrent Versions System (CVS) [0-9.]*.*'
	  fi
	  ;;



	basica)
	  # Similar in spirit to some of the basic1, and basic2
	  # tests, but hopefully a lot faster.  Also tests operating on
	  # files two directories down *without* operating on the parent dirs.

	  # Tests basica-0a and basica-0b provide the equivalent of the:
	  #    mkdir ${CVSROOT_DIRNAME}/first-dir
	  # used by many of the tests.  It is "more official" in the sense
	  # that is does everything through CVS; the reason most of the
	  # tests don't use it is mostly historical.
	  mkdir 1; cd 1
	  dotest basica-0a "$testcvs -q co -l ."
	  mkdir first-dir
	  dotest basica-0b "$testcvs add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd ..
	  rm -r 1

	  dotest basica-1 "$testcvs -q co first-dir" ''
	  cd first-dir

	  # Test a few operations, to ensure they gracefully do
	  # nothing in an empty directory.
	  dotest basica-1a0 "$testcvs -q update"
	  dotest basica-1a1 "$testcvs -q diff -c"
	  dotest basica-1a2 "$testcvs -q status"
	  dotest basica-1a3 "$testcvs -q update ."
	  dotest basica-1a4 "$testcvs -q update ./"

	  mkdir sdir
	  # Remote CVS gives the "cannot open CVS/Entries" error, which is
	  # clearly a bug, but not a simple one to fix.
	  dotest basica-1a10 "$testcvs -n add sdir" \
"Directory $CVSROOT_DIRNAME/first-dir/sdir added to the repository" \
"$SPROG add: cannot open CVS/Entries for reading: No such file or directory
Directory $CVSROOT_DIRNAME/first-dir/sdir added to the repository"
	  dotest_fail basica-1a11 \
	    "test -d $CVSROOT_DIRNAME/first-dir/sdir"
	  dotest basica-2 "$testcvs add sdir" \
"Directory $CVSROOT_DIRNAME/first-dir/sdir added to the repository"
	  cd sdir
	  mkdir ssdir
	  dotest basica-3 "$testcvs add ssdir" \
"Directory $CVSROOT_DIRNAME/first-dir/sdir/ssdir added to the repository"
	  cd ssdir
	  echo ssfile >ssfile

	  # Trying to commit it without a "cvs add" should be an error.
	  # The "use `cvs add' to create an entry" message is the one
	  # that I consider to be more correct, but local cvs prints the
	  # "nothing known" message and noone has gotten around to fixing it.
	  dotest_fail basica-notadded "${testcvs} -q ci ssfile" \
"${CPROG} commit: use .${CPROG} add. to create an entry for \`ssfile'
${CPROG}"' \[commit aborted\]: correct above errors first!' \
"${CPROG}"' commit: nothing known about `ssfile'\''
'"${CPROG}"' \[commit aborted\]: correct above errors first!'

	  dotest basica-4 "${testcvs} add ssfile" \
"${SPROG}"' add: scheduling file `ssfile'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  dotest_fail basica-4a "${testcvs} tag tag0 ssfile" \
"${SPROG} tag: nothing known about ssfile
${SPROG} "'\[tag aborted\]: correct the above errors first!'
	  cd ../..
	  dotest basica-5 "${testcvs} -q ci -m add-it" \
"$CVSROOT_DIRNAME/first-dir/sdir/ssdir/ssfile,v  <--  sdir/ssdir/ssfile
initial revision: 1\.1"
	  dotest_fail basica-5a \
	    "${testcvs} -q tag BASE sdir/ssdir/ssfile" \
"${SPROG} tag: Attempt to add reserved tag name BASE
${SPROG} \[tag aborted\]: failed to set tag BASE to revision 1\.1 in ${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v"
	  dotest basica-5b "${testcvs} -q tag NOT_RESERVED" \
'T sdir/ssdir/ssfile'

	  dotest basica-6 "${testcvs} -q update" ''
	  echo "ssfile line 2" >>sdir/ssdir/ssfile
	  dotest_fail basica-6.2 "${testcvs} -q diff -c" \
"Index: sdir/ssdir/ssfile
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v
retrieving revision 1\.1
diff -c -r1\.1 ssfile
\*\*\* sdir/ssdir/ssfile	${RFCDATE}	1\.1
--- sdir/ssdir/ssfile	${RFCDATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
--- 1,2 ----
  ssfile
${PLUS} ssfile line 2"
	  dotest_fail basica-6.3 "${testcvs} -q diff -c -rBASE" \
"Index: sdir/ssdir/ssfile
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v
retrieving revision 1\.1
diff -c -r1\.1 ssfile
\*\*\* sdir/ssdir/ssfile	${RFCDATE}	1\.1
--- sdir/ssdir/ssfile	${RFCDATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
--- 1,2 ----
  ssfile
${PLUS} ssfile line 2"
	  dotest_fail basica-6.4 "${testcvs} -q diff -c -rBASE -C3isacrowd" \
"Index: sdir/ssdir/ssfile
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v
retrieving revision 1\.1
diff -c -C 3isacrowd -r1\.1 ssfile
${SPROG} diff: invalid context length argument"
	  dotest basica-7 "${testcvs} -q ci -m modify-it" \
"$CVSROOT_DIRNAME/first-dir/sdir/ssdir/ssfile,v  <--  sdir/ssdir/ssfile
new revision: 1\.2; previous revision: 1\.1"
	  dotest_fail basica-nonexist "${testcvs} -q ci nonexist" \
"${CPROG}"' commit: nothing known about `nonexist'\''
'"${CPROG}"' \[commit aborted\]: correct above errors first!'
	  dotest basica-8 "${testcvs} -q update ." ''

	  # Test the -f option to ci
	  cd sdir/ssdir
	  dotest basica-8a0 "${testcvs} -q ci -m not-modified ssfile" ''
	  dotest basica-8a "${testcvs} -q ci -f -m force-it" \
"$CVSROOT_DIRNAME/first-dir/sdir/ssdir/ssfile,v  <--  ssfile
new revision: 1\.3; previous revision: 1\.2"
	  dotest basica-8a1 "${testcvs} -q ci -m bump-it -r 2.0" \
"$CVSROOT_DIRNAME/first-dir/sdir/ssdir/ssfile,v  <--  ssfile
new revision: 2\.0; previous revision: 1\.3"
	  dotest basica-8a1a "${testcvs} -q ci -m bump-it -r 2.9" \
"${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v  <--  ssfile
new revision: 2\.9; previous revision: 2\.0"
	  # Test string-based revion number increment rollover
	  dotest basica-8a1b "${testcvs} -q ci -m bump-it -f -r 2" \
"${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v  <--  ssfile
new revision: 2\.10; previous revision: 2\.9"
	  dotest basica-8a1c "${testcvs} -q ci -m bump-it -r 2.99" \
"${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v  <--  ssfile
new revision: 2\.99; previous revision: 2\.10"
	  # Test string-based revion number increment rollover
	  dotest basica-8a1d "${testcvs} -q ci -m bump-it -f -r 2" \
"${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v  <--  ssfile
new revision: 2\.100; previous revision: 2\.99"
	  dotest basica-8a1e "${testcvs} -q ci -m bump-it -r 2.1099" \
"${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v  <--  ssfile
new revision: 2\.1099; previous revision: 2\.100"
	  # Test string-based revion number increment rollover
	  dotest basica-8a1f "${testcvs} -q ci -m bump-it -f -r 2" \
"${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v  <--  ssfile
new revision: 2\.1100; previous revision: 2\.1099"
	  # -f should not be necessary, but it should be harmless.
	  # Also test the "-r 3" (rather than "-r 3.0") usage.
	  dotest basica-8a2 "${testcvs} -q ci -m bump-it -f -r 3" \
"$CVSROOT_DIRNAME/first-dir/sdir/ssdir/ssfile,v  <--  ssfile
new revision: 3\.1; previous revision: 2\.1100"

	  # Test using -r to create a branch
	  dotest_fail basica-8a3 "${testcvs} -q ci -m bogus -r 3.0.0" \
"$CVSROOT_DIRNAME/first-dir/sdir/ssdir/ssfile,v  <--  ssfile
$SPROG commit: $CVSROOT_DIRNAME/first-dir/sdir/ssdir/ssfile,v: can't find branch point 3\.0
$SPROG commit: could not check in ssfile"
	  dotest basica-8a4 "${testcvs} -q ci -m valid -r 3.1.2" \
"$CVSROOT_DIRNAME/first-dir/sdir/ssdir/ssfile,v  <--  ssfile
new revision: 3\.1\.2\.1; previous revision: 3\.1"
	  # now get rid of the sticky tag and go back to the trunk
	  dotest basica-8a5 "${testcvs} -q up -A ./" "[UP] ssfile"

	  cd ../..
	  dotest basica-8b "${testcvs} -q diff -r1.2 -r1.3"

	  dotest basica-8b1 "${testcvs} -q diff -r1.2 -r1.3 -C 3isacrowd"

	  # The .* here will normally be "No such file or directory",
	  # but if memory serves some systems (AIX?) have a different message.
:	  dotest_fail basica-9 \
	    "${testcvs} -q -d ${TESTDIR}/nonexist update" \
"${SPROG}: cannot access cvs root ${TESTDIR}/nonexist: .*"
	  dotest_fail basica-9a \
	    "${testcvs} -q -d ${TESTDIR}/nonexist update" \
"${CPROG} \[update aborted\]: ${TESTDIR}/nonexist/CVSROOT: .*"

	  dotest basica-10 "${testcvs} annotate" \
'
Annotations for sdir/ssdir/ssfile
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
1\.1          .'"$username8"' *[0-9a-zA-Z-]*.: ssfile
1\.2          .'"$username8"' *[0-9a-zA-Z-]*.: ssfile line 2'

	  # Test resurrecting with strange revision numbers
	  cd sdir/ssdir
	  dotest basica-r1 "${testcvs} rm -f ssfile" \
"${SPROG} remove: scheduling .ssfile. for removal
${SPROG} remove: use .${SPROG} commit. to remove this file permanently"
	  dotest basica-r2 "${testcvs} -q ci -m remove" \
"$CVSROOT_DIRNAME/first-dir/sdir/ssdir/ssfile,v  <--  ssfile
new revision: delete; previous revision: 3\.1"
	  dotest basica-r3 "${testcvs} -q up -p -r 3.1 ./ssfile >ssfile" ""
	  dotest basica-r4 "${testcvs} add ssfile" \
"${SPROG} add: Re-adding file .ssfile. after dead revision 3\.2\.
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest basica-r5 "${testcvs} -q ci -m resurrect" \
"$CVSROOT_DIRNAME/first-dir/sdir/ssdir/ssfile,v  <--  ssfile
new revision: 3\.3; previous revision: 3\.2"
	  cd ../..

	  # As long as we have a file with a few revisions, test
	  # a few "cvs admin -o" invocations.
	  cd sdir/ssdir
	  dotest_fail basica-o1 "${testcvs} admin -o 1.2::1.2" \
"${CPROG} admin: while processing more than one file:
${CPROG} \[admin aborted\]: attempt to specify a numeric revision"
	  dotest basica-o2 "${testcvs} admin -o 1.2::1.2 ssfile" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v
done"
	  dotest basica-o2a "${testcvs} admin -o 1.1::NOT_RESERVED ssfile" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v
done"
	  dotest_fail basica-o2b "${testcvs} admin -o 1.1::NOT_EXIST ssfile" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v
${SPROG} admin: ${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v: Revision NOT_EXIST doesn't exist.
${SPROG} admin: RCS file for .ssfile. not modified\."
	  dotest basica-o3 "${testcvs} admin -o 1.2::1.3 ssfile" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v
done"
	  dotest basica-o4 "${testcvs} admin -o 3.1:: ssfile" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v
deleting revision 3\.3
deleting revision 3\.2
done"
	  dotest basica-o5 "${testcvs} admin -o ::1.1 ssfile" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v
done"
	  dotest basica-o5a "${testcvs} -n admin -o 1.2::3.1 ssfile" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v
deleting revision 2\.1100
deleting revision 2\.1099
deleting revision 2\.100
deleting revision 2\.99
deleting revision 2\.10
deleting revision 2\.9
deleting revision 2\.0
deleting revision 1\.3
done"
	  dotest basica-o6 "${testcvs} admin -o 1.2::3.1 ssfile" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v
deleting revision 2\.1100
deleting revision 2\.1099
deleting revision 2\.100
deleting revision 2\.99
deleting revision 2\.10
deleting revision 2\.9
deleting revision 2\.0
deleting revision 1\.3
done"
	  dotest basica-o6a "${testcvs} admin -o 3.1.2: ssfile" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v
deleting revision 3\.1\.2\.1
done"
	  dotest basica-o7 "${testcvs} log -N ssfile" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/sdir/ssdir/ssfile,v
Working file: ssfile
head: 3\.1
branch:
locks: strict
access list:
keyword substitution: kv
total revisions: 3;	selected revisions: 3
description:
----------------------------
revision 3\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}0 -0;  commitid: ${commitid};
bump-it
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
modify-it
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
add-it
============================================================================="
	  dotest basica-o8 "${testcvs} -q update -p -r 1.1 ./ssfile" "ssfile"
	  cd ../..

	  cd ..

	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  rm -r first-dir
	  ;;



	basicb)
	  # More basic tests, including non-branch tags and co -d.
	  mkdir 1; cd 1
	  dotest basicb-0a "${testcvs} -q co -l ." ''
	  touch topfile
	  dotest basicb-0b "${testcvs} add topfile" \
"${SPROG} add: scheduling file .topfile. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest basicb-0c "${testcvs} -q ci -m add-it topfile" \
"$CVSROOT_DIRNAME/topfile,v  <--  topfile
initial revision: 1\.1"
	  cd ..
	  rm -r 1
	  mkdir 2; cd 2
	  dotest basicb-0d "${testcvs} -q co -l ." "U topfile"
	  # Now test the ability to run checkout on an existing working
	  # directory without having it lose its mind.  I don't know
	  # whether this is tested elsewhere in sanity.sh.  A more elaborate
	  # test might also have modified files, make sure it works if
	  # the modules file was modified to add new directories to the
	  # module, and such.
	  dotest basicb-0d0 "${testcvs} -q co -l ." ""
	  mkdir first-dir
	  dotest basicb-0e "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd ..
	  rm -r 2

	  dotest basicb-1 "${testcvs} -q co first-dir" ''

	  # The top-level CVS directory is not created by default.
	  # I'm leaving basicb-1a and basicb-1b untouched, mostly, in
	  # case we decide that the default should be reversed...

	  dotest_fail basicb-1a "test -d CVS" ''

	  dotest basicb-1c "cat first-dir/CVS/Repository" "first-dir"

	  cd first-dir
	  # Note that the name Emptydir is chosen to test that CVS just
	  # treats it like any other directory name.  It should be
	  # special only when it is directly in $CVSROOT/CVSROOT.
	  mkdir Emptydir sdir2
	  dotest basicb-2 "${testcvs} add Emptydir sdir2" \
"Directory ${CVSROOT_DIRNAME}/first-dir/Emptydir added to the repository
Directory ${CVSROOT_DIRNAME}/first-dir/sdir2 added to the repository"
	  cd Emptydir
	  echo sfile1 starts >sfile1
	  dotest basicb-2a10 "${testcvs} -n add sfile1" \
"${SPROG} add: scheduling file .sfile1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest basicb-2a11 "${testcvs} status sfile1" \
"${SPROG} status: use \`${SPROG} add' to create an entry for \`sfile1'
===================================================================
File: sfile1           	Status: Unknown

   Working revision:	No entry for sfile1
   Repository revision:	No revision control file"
	  dotest basicb-3 "${testcvs} add sfile1" \
"${SPROG} add: scheduling file .sfile1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest basicb-3a1 "${testcvs} status sfile1" \
"===================================================================
File: sfile1           	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"

	  cd ../sdir2
	  echo sfile2 starts >sfile2
	  dotest basicb-4 "${testcvs} add sfile2" \
"${SPROG} add: scheduling file .sfile2. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest basicb-4a "${testcvs} -q ci CVS" \
"${CPROG} commit: warning: directory CVS specified in argument
${CPROG} commit: but CVS uses CVS for its own purposes; skipping CVS directory"
	  cd ..
	  dotest basicb-5 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/Emptydir/sfile1,v  <--  Emptydir/sfile1
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/sdir2/sfile2,v  <--  sdir2/sfile2
initial revision: 1\.1"
	  echo sfile1 develops >Emptydir/sfile1
	  dotest basicb-6 "${testcvs} -q ci -m modify" \
"$CVSROOT_DIRNAME/first-dir/Emptydir/sfile1,v  <--  Emptydir/sfile1
new revision: 1\.2; previous revision: 1\.1"
	  dotest basicb-7 "${testcvs} -q tag release-1" 'T Emptydir/sfile1
T sdir2/sfile2'
	  echo not in time for release-1 >sdir2/sfile2
	  dotest basicb-8 "${testcvs} -q ci -m modify-2" \
"$CVSROOT_DIRNAME/first-dir/sdir2/sfile2,v  <--  sdir2/sfile2
new revision: 1\.2; previous revision: 1\.1"
	  # See if CVS can correctly notice when an invalid numeric
	  # revision is specified.
	  # Commented out until we get around to fixing CVS
:	  dotest basicb-8a0 "${testcvs} diff -r 1.5 -r 1.7 sfile2" 'error msg'
	  cd ..

	  # Test that we recurse into the correct directory when checking
	  # for existing files, even if co -d is in use.
	  touch first-dir/extra
	  dotest basicb-cod-1 "${testcvs} -q co -d first-dir1 first-dir" \
'U first-dir1/Emptydir/sfile1
U first-dir1/sdir2/sfile2'
	  rm -r first-dir1

	  rm -r first-dir

	  # FIXME? basicb-9 used to check things out like this:
	  #   U newdir/Emptydir/sfile1
	  #   U newdir/sdir2/sfile2
	  # but that's difficult to do.  The whole "shorten" thing
	  # is pretty bogus, because it will break on things
	  # like "cvs co foo/bar baz/quux".  Unless there's some
	  # pretty detailed expansion and analysis of the command-line
	  # arguments, we shouldn't do "shorten" stuff at all.

	  dotest basicb-9 \
"${testcvs} -q co -d newdir -r release-1 first-dir/Emptydir first-dir/sdir2" \
'U newdir/first-dir/Emptydir/sfile1
U newdir/first-dir/sdir2/sfile2'

	  # basicb-9a and basicb-9b: see note about basicb-1a

	  dotest_fail basicb-9a "test -d CVS" ''

	  dotest basicb-9c "cat newdir/CVS/Repository" "\."
	  dotest basicb-9d "cat newdir/first-dir/CVS/Repository" \
"${CVSROOT_DIRNAME}/first-dir" \
"first-dir"
	  dotest basicb-9e "cat newdir/first-dir/Emptydir/CVS/Repository" \
"${CVSROOT_DIRNAME}/first-dir/Emptydir" \
"first-dir/Emptydir"
	  dotest basicb-9f "cat newdir/first-dir/sdir2/CVS/Repository" \
"${CVSROOT_DIRNAME}/first-dir/sdir2" \
"first-dir/sdir2"

	  dotest basicb-10 "cat newdir/first-dir/Emptydir/sfile1 newdir/first-dir/sdir2/sfile2" \
"sfile1 develops
sfile2 starts"

	  rm -r newdir

	  # Hmm, this might be a case for CVSNULLREPOS, but CVS doesn't
	  # seem to deal with it...
	  if false; then
	  dotest basicb-11 "${testcvs} -q co -d sub1/sub2 first-dir" \
"U sub1/sub2/Emptydir/sfile1
U sub1/sub2/sdir2/sfile2"
	  cd sub1
	  dotest basicb-12 "${testcvs} -q update ./." ''
	  touch xx
	  dotest basicb-13 "${testcvs} add xx" fixme
	  cd ..
	  rm -r sub1
	  # to test: sub1/sub2/sub3
	  fi # end of tests commented out.

	  # Create a second directory.
	  mkdir 1
	  cd 1
	  dotest basicb-14 "${testcvs} -q co -l ." 'U topfile'
	  mkdir second-dir
	  dotest basicb-15 "${testcvs} add second-dir" \
"Directory ${CVSROOT_DIRNAME}/second-dir added to the repository"
	  cd second-dir
	  touch aa
	  dotest basicb-16 "${testcvs} add aa" \
"${SPROG} add: scheduling file .aa. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest basicb-17 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/second-dir/aa,v  <--  aa
initial revision: 1\.1"
	  cd ..

	  # Try to remove all revisions in a file.
	  dotest_fail basicb-o1 "${testcvs} admin -o1.1 topfile" \
"RCS file: ${CVSROOT_DIRNAME}/topfile,v
deleting revision 1\.1
${SPROG} \[admin aborted\]: attempt to delete all revisions"
	  dotest basicb-o2 "${testcvs} -q update -d first-dir" \
"U first-dir/Emptydir/sfile1
U first-dir/sdir2/sfile2"
	  dotest_fail basicb-o3 \
"${testcvs} admin -o1.1:1.2 first-dir/sdir2/sfile2" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/sdir2/sfile2,v
deleting revision 1\.2
deleting revision 1\.1
${SPROG} \[admin aborted\]: attempt to delete all revisions"
	  cd ..
	  rm -r 1

	  mkdir 1; cd 1
	  # Note that -H is an invalid option.
	  # I suspect that the choice between "illegal" and "invalid"
	  # depends on the user's environment variables, the phase
	  # of the moon (weirdness with optind), and who knows what else.
	  # I've been seeing "illegal"...
	  # And I switched it to "invalid". -DRP
	  # POSIX 1003.2 specifies the format should be 'illegal option'
	  # many other folks are still using the older 'invalid option'
	  # lib/getopt.c will use POSIX when __posixly_correct
	  # otherwise the other, so accept both of them. -- mdb
	  dotest_fail basicb-21 "${testcvs} -q admin -H" \
"admin: invalid option -- '*H'*
${CPROG} \[admin aborted\]: specify ${CPROG} -H admin for usage information" \
"admin: illegal option -- '*H'*
${CPROG} \[admin aborted\]: specify ${CPROG} -H admin for usage information"
	  cd ..
	  rmdir 1

	  if $keep; then
	    echo Keeping ${TESTDIR} and exiting due to --keep
	    exit 0
	  fi

	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir \
			     $CVSROOT_DIRNAME/second-dir
	  modify_repo rm -f $CVSROOT_DIRNAME/topfile,v
	  ;;



	basicc)
	  # More tests of basic/miscellaneous functionality.
	  mkdir 1; cd 1
	  dotest_fail basicc-1 "$testcvs diff" \
"$CPROG diff: in directory \.:
$CPROG \[diff aborted\]: there is no version here; run .$CPROG checkout. first"
	  dotest basicc-2 "$testcvs -q co -l ."
	  mkdir first-dir second-dir
	  dotest basicc-3 "${testcvs} add first-dir second-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository
Directory ${CVSROOT_DIRNAME}/second-dir added to the repository"
	  # Old versions of CVS often didn't create this top-level CVS
	  # directory in the first place.  I think that maybe the only
	  # way to get it to work currently is to let CVS create it,
	  # and then blow it away (don't complain if it does not
	  # exist).  But that is perfectly valid; people who are used
	  # to the old behavior especially may be interested.
	  # FIXME: this test is intended for the TopLevelAdmin=yes case;
	  # should adjust/move it accordingly.
	  rm -rf CVS
	  dotest basicc-4 "echo *" "first-dir second-dir"
	  dotest basicc-5 "${testcvs} update" \
"${SPROG} update: Updating first-dir
${SPROG} update: Updating second-dir" \
"${SPROG} update: Updating \.
${SPROG} update: Updating first-dir
${SPROG} update: Updating second-dir"

	  cd first-dir
	  dotest basicc-6 "${testcvs} release -d" ""
	  dotest basicc-7 "test -d ../first-dir" ""
	  # The Linux 2.2 kernel lets you delete ".".  That's OK either way,
	  # the point is that CVS must not mess with anything *outside* "."
	  # the way that CVS 1.10 and older tried to.
	  dotest basicc-8 "${testcvs} -Q release -d ." \
"" "${CPROG} release: deletion of directory \. failed: .*"
	  dotest basicc-9 "test -d ../second-dir" ""
	  # For CVS to make a syntactic check for "." wouldn't suffice.
	  # On Linux 2.2 systems, the cwd may be gone, so we recreate it
          # to allow basicc-11 to actually happen 
	  if test ! -d ../first-dir; then
	    # Apparently `cd ..' doesn't work with Linux 2.2 & Bash 2.05b.
	    cd $TESTDIR/1
	    mkdir ./first-dir
            cd ./first-dir
	  fi
	  dotest basicc-11 "${testcvs} -Q release -d ./." \
"" "${CPROG} release: deletion of directory \./\. failed: .*"
	  dotest basicc-11a "test -d ../second-dir" ""

	  cd ../..

	  mkdir 2; cd 2
	  dotest basicc-12 "${testcvs} -Q co ." ""
	  # actual entries can be in either Entries or Entries.log, do
	  # an update to get them consolidated into Entries
	  dotest basicc-12a "${testcvs} -Q up" ""
	  dotest basicc-12b "cat CVS/Entries" \
"D/CVSROOT////
D/first-dir////
D/second-dir////"
	  dotest basicc-13 "echo *" "CVS CVSROOT first-dir second-dir"
	  dotest basicc-14 "${testcvs} -Q release first-dir second-dir" ""
	  # a normal release shouldn't affect the Entries file
	  dotest basicc-14b "cat CVS/Entries" \
"D/CVSROOT////
D/first-dir////
D/second-dir////"
	  # FIXCVS: but release -d probably should
	  dotest basicc-15 "${testcvs} -Q release -d first-dir second-dir" ""
	  dotest basicc-16 "echo *" "CVS CVSROOT"
	  dotest basicc-17 "cat CVS/Entries" \
"D/CVSROOT////
D/first-dir////
D/second-dir////"
	  # FIXCVS: if not, update should notice the missing directories
	  # and update Entries accordingly
	  dotest basicc-18 "${testcvs} -Q up" ""
	  dotest basicc-19 "cat CVS/Entries" \
"D/CVSROOT////
D/first-dir////
D/second-dir////"

	  cd ..
	  rm -r 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir \
			     $CVSROOT_DIRNAME/second-dir
	  ;;



	basic1)
	  # first dive - add a files, first singly, then in a group.
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  mkdir basic1; cd basic1
	  # check out an empty directory
	  dotest basic1-1 "${testcvs} -q co first-dir" ''

	  cd first-dir
	  echo file2 >file2
	  echo file3 >file3
	  echo file4 >file4
	  echo file5 >file5

	  dotest basic1-14-add-add "${testcvs} add file2 file3 file4 file5" \
"${SPROG} add: scheduling file \`file2' for addition
${SPROG} add: scheduling file \`file3' for addition
${SPROG} add: scheduling file \`file4' for addition
${SPROG} add: scheduling file \`file5' for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  dotest basic1-15-add-add \
"${testcvs} -q update file2 file3 file4 file5" \
"A file2
A file3
A file4
A file5"
	  dotest basic1-16-add-add "${testcvs} -q update" \
"A file2
A file3
A file4
A file5"
	  dotest basic1-17-add-add "${testcvs} -q status" \
"===================================================================
File: file2            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file3            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file4            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file5            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest basic1-18-add-add "${testcvs} -q log" \
"${SPROG} log: file2 has been added, but not committed
${SPROG} log: file3 has been added, but not committed
${SPROG} log: file4 has been added, but not committed
${SPROG} log: file5 has been added, but not committed"
	  cd ..
	  dotest basic1-21-add-add "${testcvs} -q update" \
"A first-dir/file2
A first-dir/file3
A first-dir/file4
A first-dir/file5"
	  # FIXCVS?  Shouldn't this read first-dir/file2 instead of file2?
	  dotest basic1-22-add-add "${testcvs} log first-dir" \
"${SPROG} log: Logging first-dir
${SPROG} log: file2 has been added, but not committed
${SPROG} log: file3 has been added, but not committed
${SPROG} log: file4 has been added, but not committed
${SPROG} log: file5 has been added, but not committed"
	  dotest basic1-23-add-add "${testcvs} status first-dir" \
"${SPROG} status: Examining first-dir
===================================================================
File: file2            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file3            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file4            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file5            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest basic1-24-add-add "${testcvs} update first-dir" \
"${SPROG} update: Updating first-dir
A first-dir/file2
A first-dir/file3
A first-dir/file4
A first-dir/file5"
	  dotest basic1-27-add-add "${testcvs} co first-dir" \
"${SPROG} checkout: Updating first-dir
A first-dir/file2
A first-dir/file3
A first-dir/file4
A first-dir/file5"
	  cd first-dir
	  dotest basic1-14-add-ci \
"$testcvs commit -m test file2 file3 file4 file5" \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file3,v  <--  file3
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file5,v  <--  file5
initial revision: 1\.1"
	  dotest basic1-15-add-ci \
"${testcvs} -q update file2 file3 file4 file5" ''
	  dotest basic1-16-add-ci "${testcvs} -q update" ''
	  dotest basic1-17-add-ci "${testcvs} -q status" \
"===================================================================
File: file2            	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file2,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file3            	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file3,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file4            	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file4,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file5            	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file5,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  # The "log" tests and friends probably already test the output 
	  # from log quite adequately.
	  # Note: using dotest fails here.  It seems to be related
	  # to the output being sufficiently large (Red Hat 4.1).
	  # dotest basic1-18-add-ci "${testcvs} log" "${DOTSTAR}"
	  if ${testcvs} -q log >>${LOGFILE}; then
	    pass basic1-18-add-ci
	  else
	    pass basic1-18-add-ci
	  fi
	  cd ..
	  dotest basic1-21-add-ci "${testcvs} -q update" ''
	  # See test basic1-18-add-ci for explanation of non-use of dotest.
	  if ${testcvs} -q log first-dir >>${LOGFILE}; then
	    pass basic1-22-add-ci
	  else
	    pass basic1-22-add-ci
	  fi
	  # At least for the moment I am going to consider 17-add-ci
	  # an adequate test of the output here.
	  # See test basic1-18-add-ci for explanation of non-use of dotest.
	  if ${testcvs} -q status first-dir >>${LOGFILE}; then
	    pass basic1-23-add-ci
	  else
	    pass basic1-23-add-ci
	  fi
	  dotest basic1-24-add-ci "${testcvs} -q update first-dir" ''
	  dotest basic1-27-add-ci "${testcvs} -q co first-dir" ''

	  cd first-dir
	  rm file2 file3 file4 file5
	  dotest basic1-14-rm-rm "${testcvs} rm file2 file3 file4 file5" \
"${SPROG} remove: scheduling .file2. for removal
${SPROG} remove: scheduling .file3. for removal
${SPROG} remove: scheduling .file4. for removal
${SPROG} remove: scheduling .file5. for removal
${SPROG} remove: use .${SPROG} commit. to remove these files permanently"
	  # 15-rm-rm was commented out.  Why?
	  dotest basic1-15-rm-rm \
"${testcvs} -q update file2 file3 file4 file5" \
"R file2
R file3
R file4
R file5"
	  dotest basic1-16-rm-rm "${testcvs} -q update" \
"R file2
R file3
R file4
R file5"
	  dotest basic1-17-rm-rm "${testcvs} -q status" \
"===================================================================
File: no file file2		Status: Locally Removed

   Working revision:	-1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file2,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: no file file3		Status: Locally Removed

   Working revision:	-1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file3,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: no file file4		Status: Locally Removed

   Working revision:	-1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file4,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: no file file5		Status: Locally Removed

   Working revision:	-1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file5,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  # Would be nice to test that real logs appear (with dead state
	  # and all), either here or someplace like log2 tests.
	  if ${testcvs} -q log >>${LOGFILE}; then
	    pass basic1-18-rm-rm
	  else
	    fail basic1-18-rm-rm
	  fi
	  cd ..
	  dotest basic1-21-rm-rm "${testcvs} -q update" \
"R first-dir/file2
R first-dir/file3
R first-dir/file4
R first-dir/file5"
	  if ${testcvs} -q log first-dir >>${LOGFILE}; then
	    pass basic1-22-rm-rm
	  else
	    fail basic1-22-rm-rm
	  fi
	  if ${testcvs} -q status first-dir >>${LOGFILE}; then
	    pass basic1-23-rm-rm
	  else
	    fail basic1-23-rm-rm
	  fi
	  dotest basic1-24-rm-rm "${testcvs} -q update first-dir" \
"R first-dir/file2
R first-dir/file3
R first-dir/file4
R first-dir/file5"
	  dotest basic1-27-rm-rm "${testcvs} -q co first-dir" \
"R first-dir/file2
R first-dir/file3
R first-dir/file4
R first-dir/file5"
	  cd first-dir
	  dotest basic1-14-rm-ci "${testcvs} -q commit -m test" \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: delete; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file3,v  <--  file3
new revision: delete; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
new revision: delete; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file5,v  <--  file5
new revision: delete; previous revision: 1\.1"
	  dotest basic1-15-rm-ci \
"${testcvs} -q update file2 file3 file4 file5" ''
	  dotest basic1-16-rm-ci "${testcvs} -q update" ''
	  dotest basic1-17-rm-ci "${testcvs} -q status" ''
	  # Would be nice to test that real logs appear (with dead state
	  # and all), either here or someplace like log2 tests.
	  if ${testcvs} -q log >>${LOGFILE}; then
	    pass basic1-18-rm-ci
	  else
	    fail basic1-18-rm-ci
	  fi
	  cd ..
	  dotest basic1-21-rm-ci "${testcvs} -q update" ''
	  if ${testcvs} -q log first-dir >>${LOGFILE}; then
	    pass basic1-22-rm-ci
	  else
	    fail basic1-22-rm-ci
	  fi
	  if ${testcvs} -q status first-dir >>${LOGFILE}; then
	    pass basic1-23-rm-ci
	  else
	    fail basic1-23-rm-ci
	  fi
	  dotest basic1-24-rm-ci "${testcvs} -q update first-dir" ''
	  dotest basic1-27-rm-ci "${testcvs} -q co first-dir" ''
	  cd first-dir
	  # All the files are removed, so nothing gets tagged.
	  dotest basic1-28 "${testcvs} -q tag first-dive" ''
	  cd ..
	  cd ..

	  if $keep; then
	    echo Keeping ${TESTDIR} and exiting due to --keep
	    exit 0
	  fi

	  rm -r basic1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	deep)
	  # Test the ability to operate on directories nested rather deeply.
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  dotest deep-1 "${testcvs} -q co first-dir" ''
	  cd first-dir
	  for i in dir1 dir2 dir3 dir4 dir5 dir6 dir7 dir8; do
	    mkdir $i
	    dotest deep-2-$i "${testcvs} add $i" \
"Directory ${CVSROOT_DIRNAME}/first-dir/dir1[/dir0-9]* added to the repository"
	    cd $i
	    echo file1 >file1
	    dotest deep-3-$i "${testcvs} add file1" \
"${SPROG}"' add: scheduling file `file1'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  done
	  cd ../../../../../../../../..
	  dotest_lit deep-4 "$testcvs -q ci -m add-them first-dir" <<HERE
$CVSROOT_DIRNAME/first-dir/dir1/file1,v  <--  first-dir/dir1/file1
initial revision: 1.1
$CVSROOT_DIRNAME/first-dir/dir1/dir2/file1,v  <--  first-dir/dir1/dir2/file1
initial revision: 1.1
$CVSROOT_DIRNAME/first-dir/dir1/dir2/dir3/file1,v  <--  first-dir/dir1/dir2/dir3/file1
initial revision: 1.1
$CVSROOT_DIRNAME/first-dir/dir1/dir2/dir3/dir4/file1,v  <--  first-dir/dir1/dir2/dir3/dir4/file1
initial revision: 1.1
$CVSROOT_DIRNAME/first-dir/dir1/dir2/dir3/dir4/dir5/file1,v  <--  first-dir/dir1/dir2/dir3/dir4/dir5/file1
initial revision: 1.1
$CVSROOT_DIRNAME/first-dir/dir1/dir2/dir3/dir4/dir5/dir6/file1,v  <--  first-dir/dir1/dir2/dir3/dir4/dir5/dir6/file1
initial revision: 1.1
$CVSROOT_DIRNAME/first-dir/dir1/dir2/dir3/dir4/dir5/dir6/dir7/file1,v  <--  first-dir/dir1/dir2/dir3/dir4/dir5/dir6/dir7/file1
initial revision: 1.1
$CVSROOT_DIRNAME/first-dir/dir1/dir2/dir3/dir4/dir5/dir6/dir7/dir8/file1,v  <--  first-dir/dir1/dir2/dir3/dir4/dir5/dir6/dir7/dir8/file1
initial revision: 1.1
HERE

	  cd first-dir/dir1/dir2/dir3/dir4/dir5/dir6/dir7/dir8
	  rm file1
	  dotest deep-4a0 "$testcvs rm file1" \
"$SPROG remove: scheduling .file1. for removal
$SPROG remove: use .$SPROG commit. to remove this file permanently"
	  dotest deep-4a1 "$testcvs -q ci -m rm-it" \
"$CVSROOT_DIRNAME/first-dir/dir1/dir2/dir3/dir4/dir5/dir6/dir7/dir8/file1,v  <--  file1
new revision: delete; previous revision: 1\.1"
	  cd ../../..
	  dotest deep-4a2 "${testcvs} -q update -P dir6/dir7" ''
	  # Should be using "test -e", but it's not portable enough -
	  # Solaris 2.5 does not have it.
	  dotest_fail deep-4a3 "test -d dir6/dir7/dir8" ''

	  # Test that if we remove the working directory, CVS does not
	  # recreate it.  (I realize that this behavior is what the
	  # users expect, but in the longer run we might want to
	  # re-think it.  The corresponding behavior for a file is that
	  # CVS *will* recreate it, and we might want to make it so
	  # that "cvs release -d" is the way to delete the directory
	  # and have it stay gone -kingdon, Oct1996).
	  rm -r dir6
	  dotest deep-4b0a "${testcvs} -q diff"
	  dotest deep-4b0b "${testcvs} -q ci"
	  dotest deep-4b1 "${testcvs} -q update"
	  dotest deep-4b2 "${testcvs} -q update -d -P" \
'U dir6/file1
U dir6/dir7/file1'

	  # Test what happens if one uses -P when there are files removed
	  # but not committed.
	  cd dir6/dir7
	  dotest deep-rm1 "${testcvs} rm -f file1" \
"${SPROG} remove: scheduling .file1. for removal
${SPROG} remove: use .${SPROG} commit. to remove this file permanently"
	  cd ..
	  dotest deep-rm2 "${testcvs} -q update -d -P" 'R dir7/file1'
	  dotest deep-rm3 "test -d dir7" ''
	  dotest deep-rm4 "$testcvs -q ci -m rm-it" \
"$CVSROOT_DIRNAME/first-dir/dir1/dir2/dir3/dir4/dir5/dir6/dir7/file1,v  <--  dir7/file1
new revision: delete; previous revision: 1\.1"
	  dotest deep-rm5 "${testcvs} -q update -d -P" ''
	  dotest_fail deep-rm6 "test -d dir7" ''

	  # Test rm -f -R.
	  cd ../..
	  dotest deep-rm7 "${testcvs} rm -f -R dir5" \
"${SPROG} remove: Removing dir5
${SPROG} remove: scheduling .dir5/file1. for removal
${SPROG} remove: Removing dir5/dir6
${SPROG} remove: scheduling .dir5/dir6/file1. for removal
${SPROG} remove: use .${SPROG} commit. to remove these files permanently"
	  dotest deep-rm8 "${testcvs} -q ci -m rm-it" \
"$CVSROOT_DIRNAME/first-dir/dir1/dir2/dir3/dir4/dir5/file1,v  <--  dir5/file1
new revision: delete; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/dir1/dir2/dir3/dir4/dir5/dir6/file1,v  <--  dir5/dir6/file1
new revision: delete; previous revision: 1\.1"
	  dotest deep-rm9 "${testcvs} -q update -d -P" ''
	  dotest_fail deep-rm10 "test -d dir5"

	  cd ../../../../..

	  if echo "yes" | $testcvs release -d first-dir >>$LOGFILE 2>&1; then
	    pass deep-5
	  else
	    fail deep-5
	  fi
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	basic2)
		# Test rtag, import, history, various miscellaneous operations

		# NOTE: this section has reached the size and
		# complexity where it is getting to be a good idea to
		# add new tests to a new section rather than
		# continuing to piggyback them onto the tests here.

		# First empty the history file
		modify_repo rm -rf $CVSROOT_DIRNAME/CVSROOT/history
		modify_repo touch $CVSROOT_DIRNAME/CVSROOT/history

		modify_repo mkdir $CVSROOT_DIRNAME/first-dir
		dotest basic2-1 "$testcvs -q co first-dir"
		for i in first-dir dir1 dir2 ; do
			if test ! -d $i ; then
				mkdir $i
				dotest basic2-2-$i "${testcvs} add $i" \
"Directory ${CVSROOT_DIRNAME}/.*/$i added to the repository"
			fi

			cd $i

			for j in file6 file7; do
				echo $j > $j
			done

			dotest basic2-3-$i "${testcvs} add file6 file7" \
"${SPROG} add: scheduling file .file6. for addition
${SPROG} add: scheduling file .file7. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"

		done
		cd ../../..
		dotest basic2-4 "${testcvs} update first-dir" \
"${SPROG} update: Updating first-dir
A first-dir/file6
A first-dir/file7
${SPROG} update: Updating first-dir/dir1
A first-dir/dir1/file6
A first-dir/dir1/file7
${SPROG} update: Updating first-dir/dir1/dir2
A first-dir/dir1/dir2/file6
A first-dir/dir1/dir2/file7"

		# fixme: doesn't work right for added files.
		dotest basic2-5 "${testcvs} log first-dir" \
"${SPROG} log: Logging first-dir
${SPROG} log: file6 has been added, but not committed
${SPROG} log: file7 has been added, but not committed
${SPROG} log: Logging first-dir/dir1
${SPROG} log: file6 has been added, but not committed
${SPROG} log: file7 has been added, but not committed
${SPROG} log: Logging first-dir/dir1/dir2
${SPROG} log: file6 has been added, but not committed
${SPROG} log: file7 has been added, but not committed"

		dotest basic2-6 "${testcvs} status first-dir" \
"${SPROG} status: Examining first-dir
===================================================================
File: file6            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file7            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

${SPROG} status: Examining first-dir/dir1
===================================================================
File: file6            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file7            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

${SPROG} status: Examining first-dir/dir1/dir2
===================================================================
File: file6            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file7            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"

# XXX why is this commented out???
#		if ${CVS} diff -u first-dir   >> ${LOGFILE} || test $? = 1 ; then
#		    pass 34
#		else
#		    fail 34
#		fi

		dotest basic2-8 "${testcvs} -q ci -m 'second dive' first-dir" \
"$CVSROOT_DIRNAME/first-dir/file6,v  <--  first-dir/file6
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file7,v  <--  first-dir/file7
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/dir1/file6,v  <--  first-dir/dir1/file6
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/dir1/file7,v  <--  first-dir/dir1/file7
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/dir1/dir2/file6,v  <--  first-dir/dir1/dir2/file6
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/dir1/dir2/file7,v  <--  first-dir/dir1/dir2/file7
initial revision: 1\.1"

		dotest basic2-9 "${testcvs} tag second-dive first-dir" \
"${SPROG} tag: Tagging first-dir
T first-dir/file6
T first-dir/file7
${SPROG} tag: Tagging first-dir/dir1
T first-dir/dir1/file6
T first-dir/dir1/file7
${SPROG} tag: Tagging first-dir/dir1/dir2
T first-dir/dir1/dir2/file6
T first-dir/dir1/dir2/file7"

		# third dive - in bunch o' directories, add bunch o' files,
		# delete some, change some.

		for i in first-dir dir1 dir2 ; do
			cd $i

			# modify a file
			echo file6 >>file6

			# delete a file
			rm file7

			dotest basic2-10-$i "${testcvs} rm file7" \
"${SPROG} remove: scheduling .file7. for removal
${SPROG} remove: use .${SPROG} commit. to remove this file permanently"

			# and add a new file
			echo file14 >file14

			dotest basic2-11-$i "${testcvs} add file14" \
"${SPROG} add: scheduling file .file14. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
		done

		cd ../../..
		dotest basic2-12 "${testcvs} update first-dir" \
"${SPROG} update: Updating first-dir
A first-dir/file14
M first-dir/file6
R first-dir/file7
${SPROG} update: Updating first-dir/dir1
A first-dir/dir1/file14
M first-dir/dir1/file6
R first-dir/dir1/file7
${SPROG} update: Updating first-dir/dir1/dir2
A first-dir/dir1/dir2/file14
M first-dir/dir1/dir2/file6
R first-dir/dir1/dir2/file7"

		# FIXME: doesn't work right for added files
		dotest basic2-13 "${testcvs} log first-dir" \
"${SPROG} log: Logging first-dir
${SPROG} log: file14 has been added, but not committed

RCS file: ${CVSROOT_DIRNAME}/first-dir/file6,v
Working file: first-dir/file6
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
	second-dive: 1\.1
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
second dive
=============================================================================

RCS file: ${CVSROOT_DIRNAME}/first-dir/file7,v
Working file: first-dir/file7
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
	second-dive: 1\.1
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
second dive
=============================================================================
${SPROG} log: Logging first-dir/dir1
${SPROG} log: file14 has been added, but not committed

RCS file: ${CVSROOT_DIRNAME}/first-dir/dir1/file6,v
Working file: first-dir/dir1/file6
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
	second-dive: 1\.1
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
second dive
=============================================================================

RCS file: ${CVSROOT_DIRNAME}/first-dir/dir1/file7,v
Working file: first-dir/dir1/file7
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
	second-dive: 1\.1
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
second dive
=============================================================================
${SPROG} log: Logging first-dir/dir1/dir2
${SPROG} log: file14 has been added, but not committed

RCS file: ${CVSROOT_DIRNAME}/first-dir/dir1/dir2/file6,v
Working file: first-dir/dir1/dir2/file6
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
	second-dive: 1\.1
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
second dive
=============================================================================

RCS file: ${CVSROOT_DIRNAME}/first-dir/dir1/dir2/file7,v
Working file: first-dir/dir1/dir2/file7
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
	second-dive: 1\.1
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
second dive
============================================================================="

		dotest basic2-14 "${testcvs} status first-dir" \
"${SPROG} status: Examining first-dir
===================================================================
File: file14           	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file6            	Status: Locally Modified

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file6,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: no file file7		Status: Locally Removed

   Working revision:	-1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file7,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

${SPROG} status: Examining first-dir/dir1
===================================================================
File: file14           	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file6            	Status: Locally Modified

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/dir1/file6,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: no file file7		Status: Locally Removed

   Working revision:	-1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/dir1/file7,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

${SPROG} status: Examining first-dir/dir1/dir2
===================================================================
File: file14           	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file6            	Status: Locally Modified

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/dir1/dir2/file6,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: no file file7		Status: Locally Removed

   Working revision:	-1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/dir1/dir2/file7,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)${DOTSTAR}"

# XXX why is this commented out?
#		if ${CVS} diff -u first-dir  >> ${LOGFILE} || test $? = 1 ; then
#		    pass 42
#		else
#		    fail 42
#		fi

		dotest basic2-16 "${testcvs} ci -m 'third dive' first-dir" \
"${CPROG} commit: Examining first-dir
${CPROG} commit: Examining first-dir/dir1
${CPROG} commit: Examining first-dir/dir1/dir2
${CVSROOT_DIRNAME}/first-dir/file14,v  <--  first-dir/file14
initial revision: 1\.1
${CVSROOT_DIRNAME}/first-dir/file6,v  <--  first-dir/file6
new revision: 1\.2; previous revision: 1\.1
${CVSROOT_DIRNAME}/first-dir/file7,v  <--  first-dir/file7
new revision: delete; previous revision: 1\.1
${CVSROOT_DIRNAME}/first-dir/dir1/file14,v  <--  first-dir/dir1/file14
initial revision: 1\.1
${CVSROOT_DIRNAME}/first-dir/dir1/file6,v  <--  first-dir/dir1/file6
new revision: 1\.2; previous revision: 1\.1
${CVSROOT_DIRNAME}/first-dir/dir1/file7,v  <--  first-dir/dir1/file7
new revision: delete; previous revision: 1\.1
${CVSROOT_DIRNAME}/first-dir/dir1/dir2/file14,v  <--  first-dir/dir1/dir2/file14
initial revision: 1\.1
${CVSROOT_DIRNAME}/first-dir/dir1/dir2/file6,v  <--  first-dir/dir1/dir2/file6
new revision: 1\.2; previous revision: 1\.1
${CVSROOT_DIRNAME}/first-dir/dir1/dir2/file7,v  <--  first-dir/dir1/dir2/file7
new revision: delete; previous revision: 1\.1"
		dotest basic2-17 "${testcvs} -q update first-dir" ''

		dotest basic2-18 "${testcvs} tag third-dive first-dir" \
"${SPROG} tag: Tagging first-dir
T first-dir/file14
T first-dir/file6
${SPROG} tag: Tagging first-dir/dir1
T first-dir/dir1/file14
T first-dir/dir1/file6
${SPROG} tag: Tagging first-dir/dir1/dir2
T first-dir/dir1/dir2/file14
T first-dir/dir1/dir2/file6"

		dotest basic2-19 "echo yes | ${testcvs} release -d first-dir" \
"You have \[0\] altered files in this repository\.
Are you sure you want to release (and delete) directory .first-dir.: "

		# end of third dive
		dotest_fail basic2-20 "test -d first-dir" ""

		# now try some rtags

		# rtag HEADS
		dotest basic2-21 "${testcvs} rtag rtagged-by-head first-dir" \
"${SPROG} rtag: Tagging first-dir
${SPROG} rtag: Tagging first-dir/dir1
${SPROG} rtag: Tagging first-dir/dir1/dir2"

		dotest basic2-21b "${testcvs} co -p -r rtagged-by-head first-dir/file6" \
"===================================================================
Checking out first-dir/file6
RCS:  $CVSROOT_DIRNAME/first-dir/file6,v
VERS: 1\.2
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
file6
file6"
		# see what happens when val-tags is removed
		modify_repo mv $CVSROOT_DIRNAME/CVSROOT/val-tags \
				$CVSROOT_DIRNAME/CVSROOT/val-tags.save
		# The output for this used to be something like:
		# "${SPROG} checkout: cannot open CVS/Entries for reading: No such file or directory
		# ${SPROG} \[checkout aborted\]: no such tag \`rtagged-by-head'"

		dotest basic2-21c \
"${testcvs} co -p -r rtagged-by-head first-dir/file6" \
"===================================================================
Checking out first-dir/file6
RCS:  $CVSROOT_DIRNAME/first-dir/file6,v
VERS: 1\.2
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
file6
file6"
		modify_repo mv $CVSROOT_DIRNAME/CVSROOT/val-tags.save \
				$CVSROOT_DIRNAME/CVSROOT/val-tags

		# tag by tag
		dotest basic2-22 "${testcvs} rtag -r rtagged-by-head rtagged-by-tag first-dir" \
"${SPROG} rtag: Tagging first-dir
${SPROG} rtag: Tagging first-dir/dir1
${SPROG} rtag: Tagging first-dir/dir1/dir2"

		# tag by revision
		dotest basic2-23 "${testcvs} rtag -r1.1 rtagged-by-revision first-dir" \
"${SPROG} rtag: Tagging first-dir
${SPROG} rtag: Tagging first-dir/dir1
${SPROG} rtag: Tagging first-dir/dir1/dir2"

		# rdiff by revision
		dotest basic2-24 "${testcvs} rdiff -r1.1 -rrtagged-by-head first-dir" \
"${SPROG} rdiff: Diffing first-dir
Index: first-dir/file6
diff -c first-dir/file6:1\.1 first-dir/file6:1\.2
\*\*\* first-dir/file6:1\.1	${DATE}
--- first-dir/file6	${DATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
--- 1,2 ----
  file6
${PLUS} file6
Index: first-dir/file7
diff -c first-dir/file7:1\.1 first-dir/file7:removed
\*\*\* first-dir/file7:1.1	${DATE}
--- first-dir/file7	${DATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
- file7
--- 0 ----
${SPROG} rdiff: Diffing first-dir/dir1
Index: first-dir/dir1/file6
diff -c first-dir/dir1/file6:1\.1 first-dir/dir1/file6:1\.2
\*\*\* first-dir/dir1/file6:1\.1	${DATE}
--- first-dir/dir1/file6	${DATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
--- 1,2 ----
  file6
${PLUS} file6
Index: first-dir/dir1/file7
diff -c first-dir/dir1/file7:1\.1 first-dir/dir1/file7:removed
\*\*\* first-dir/dir1/file7:1\.1	${DATE}
--- first-dir/dir1/file7	${DATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
- file7
--- 0 ----
${SPROG} rdiff: Diffing first-dir/dir1/dir2
Index: first-dir/dir1/dir2/file6
diff -c first-dir/dir1/dir2/file6:1\.1 first-dir/dir1/dir2/file6:1\.2
\*\*\* first-dir/dir1/dir2/file6:1\.1	${DATE}
--- first-dir/dir1/dir2/file6	${DATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
--- 1,2 ----
  file6
${PLUS} file6
Index: first-dir/dir1/dir2/file7
diff -c first-dir/dir1/dir2/file7:1\.1 first-dir/dir1/dir2/file7:removed
\*\*\* first-dir/dir1/dir2/file7:1\.1	${DATE}
--- first-dir/dir1/dir2/file7	${DATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
- file7
--- 0 ----"
		dotest basic2-24a "${testcvs} rdiff -l -r1.1 -rrtagged-by-head first-dir" \
"${SPROG} rdiff: Diffing first-dir
Index: first-dir/file6
diff -c first-dir/file6:1\.1 first-dir/file6:1\.2
\*\*\* first-dir/file6:1\.1	${DATE}
--- first-dir/file6	${DATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
--- 1,2 ----
  file6
${PLUS} file6
Index: first-dir/file7
diff -c first-dir/file7:1\.1 first-dir/file7:removed
\*\*\* first-dir/file7:1.1	${DATE}
--- first-dir/file7	${DATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
- file7
--- 0 ----"
		# now export by rtagged-by-head and rtagged-by-tag and compare.
		dotest basic2-25 "${testcvs} export -r rtagged-by-head -d 1dir first-dir" \
"${SPROG} export: Updating 1dir
U 1dir/file14
U 1dir/file6
${SPROG} export: Updating 1dir/dir1
U 1dir/dir1/file14
U 1dir/dir1/file6
${SPROG} export: Updating 1dir/dir1/dir2
U 1dir/dir1/dir2/file14
U 1dir/dir1/dir2/file6"
		dotest_fail basic2-25a "test -d 1dir/CVS"
		dotest_fail basic2-25b "test -d 1dir/dir1/CVS"
		dotest_fail basic2-25c "test -d 1dir/dir1/dir2/CVS"

		dotest basic2-26 "${testcvs} export -r rtagged-by-tag first-dir" \
"${SPROG} export: Updating first-dir
U first-dir/file14
U first-dir/file6
${SPROG} export: Updating first-dir/dir1
U first-dir/dir1/file14
U first-dir/dir1/file6
${SPROG} export: Updating first-dir/dir1/dir2
U first-dir/dir1/dir2/file14
U first-dir/dir1/dir2/file6"
		dotest_fail basic2-26a "test -d first-dir/CVS"
		dotest_fail basic2-26b "test -d first-dir/dir1/CVS"
		dotest_fail basic2-26c "test -d first-dir/dir1/dir2/CVS"

		dotest basic2-27 "directory_cmp 1dir first-dir"
		rm -r 1dir first-dir

		# checkout by revision vs export by rtagged-by-revision and compare.
		mkdir export-dir
		dotest basic2-28 "${testcvs} export -rrtagged-by-revision -d export-dir first-dir" \
"${SPROG} export: Updating export-dir
U export-dir/file14
U export-dir/file6
U export-dir/file7
${SPROG} export: Updating export-dir/dir1
U export-dir/dir1/file14
U export-dir/dir1/file6
U export-dir/dir1/file7
${SPROG} export: Updating export-dir/dir1/dir2
U export-dir/dir1/dir2/file14
U export-dir/dir1/dir2/file6
U export-dir/dir1/dir2/file7"
		dotest_fail basic2-28a "test -d export-dir/CVS"
		dotest_fail basic2-28b "test -d export-dir/dir1/CVS"
		dotest_fail basic2-28c "test -d export-dir/dir1/dir2/CVS"

		dotest basic2-29 "${testcvs} co -r1.1 first-dir" \
"${SPROG} checkout: Updating first-dir
U first-dir/file14
U first-dir/file6
U first-dir/file7
${SPROG} checkout: Updating first-dir/dir1
U first-dir/dir1/file14
U first-dir/dir1/file6
U first-dir/dir1/file7
${SPROG} checkout: Updating first-dir/dir1/dir2
U first-dir/dir1/dir2/file14
U first-dir/dir1/dir2/file6
U first-dir/dir1/dir2/file7"

		# directory copies are done in an oblique way in order to avoid a bug in sun's tmp filesystem.
		mkdir first-dir.cpy ; (cd first-dir ; tar cf - . | (cd ../first-dir.cpy ; tar xf -))

		dotest basic2-30 "directory_cmp first-dir export-dir"

		# interrupt, while we've got a clean 1.1 here, let's import it
		# into a couple of other modules.
		cd export-dir
		dotest_sort basic2-31 \
"$testcvs import -m first-import second-dir first-immigration immigration1 immigration1_0" \
"

N second-dir/dir1/dir2/file14
N second-dir/dir1/dir2/file6
N second-dir/dir1/dir2/file7
N second-dir/dir1/file14
N second-dir/dir1/file6
N second-dir/dir1/file7
N second-dir/file14
N second-dir/file6
N second-dir/file7
No conflicts created by this import
${SPROG} import: Importing ${CVSROOT_DIRNAME}/second-dir/dir1
${SPROG} import: Importing ${CVSROOT_DIRNAME}/second-dir/dir1/dir2"
		cd ..

		dotest basic2-32 "${testcvs} export -r HEAD second-dir" \
"${SPROG} export: Updating second-dir
U second-dir/file14
U second-dir/file6
U second-dir/file7
${SPROG} export: Updating second-dir/dir1
U second-dir/dir1/file14
U second-dir/dir1/file6
U second-dir/dir1/file7
${SPROG} export: Updating second-dir/dir1/dir2
U second-dir/dir1/dir2/file14
U second-dir/dir1/dir2/file6
U second-dir/dir1/dir2/file7"

		dotest basic2-33 "directory_cmp first-dir second-dir"

		rm -r second-dir

		rm -r export-dir first-dir
		mkdir first-dir
		(cd first-dir.cpy ; tar cf - . | (cd ../first-dir ; tar xf -))

		# update the top, cancelling sticky tags, retag, update other copy, compare.
		cd first-dir
		dotest basic2-34 "${testcvs} update -A -l *file*" \
"[UP] file6
${SPROG} update: \`file7' is no longer in the repository"

		# If we don't delete the tag first, cvs won't retag it.
		# This would appear to be a feature.
		dotest basic2-35 "${testcvs} tag -l -d rtagged-by-revision" \
"${SPROG} tag: Untagging \.
D file14
D file6"
		dotest basic2-36 "${testcvs} tag -l rtagged-by-revision" \
"${SPROG} tag: Tagging \.
T file14
T file6"

		cd ..
		mv first-dir 1dir
		mv first-dir.cpy first-dir
		cd first-dir

		dotest basic2-37 "${testcvs} -q diff -u" ''

		dotest basic2-38 "${testcvs} update" \
"${SPROG} update: Updating .
${SPROG} update: Updating dir1
${SPROG} update: Updating dir1/dir2"

		cd ..

		#### FIXME: is this expected to work???  Need to investigate
		#### and fix or remove the test.
#		dotest basic2-39 "directory_cmp 1dir first-dir"

		rm -r 1dir first-dir

		# Test the cvs history command.
		#
		# Just skip these in write proxy mode for now.  We should only
		# see write commands and maybe the last few reads in the
		# secondary history file the way we currently sync, but I'm not
		# going to try and test this yet.
		if $proxy; then :; else

		# The reason that there are two patterns rather than using
		# \(${TESTDIR}\|<remote>\) is that we are trying to
		# make this portable.  Perhaps at some point we should
		# ditch that notion and require GNU expr (or dejagnu or....)
		# since it seems to be so painful.

		dotest basic2-64 "${testcvs} his -x TOFWUPCGMAR -a" \
"O [0-9-]* [0-9:]* ${PLUS}0000 ${username} first-dir           =first-dir= ${TESTDIR}/\*
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file6     first-dir           == ${TESTDIR}
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file7     first-dir           == ${TESTDIR}
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file6     first-dir/dir1      == ${TESTDIR}
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file7     first-dir/dir1      == ${TESTDIR}
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file6     first-dir/dir1/dir2 == ${TESTDIR}
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file7     first-dir/dir1/dir2 == ${TESTDIR}
T [0-9-]* [0-9:]* ${PLUS}0000 ${username} first-dir \[second-dive:A\]
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file14    first-dir           == ${TESTDIR}
M [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.2 file6     first-dir           == ${TESTDIR}
R [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.2 file7     first-dir           == ${TESTDIR}
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file14    first-dir/dir1      == ${TESTDIR}
M [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.2 file6     first-dir/dir1      == ${TESTDIR}
R [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.2 file7     first-dir/dir1      == ${TESTDIR}
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file14    first-dir/dir1/dir2 == ${TESTDIR}
M [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.2 file6     first-dir/dir1/dir2 == ${TESTDIR}
R [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.2 file7     first-dir/dir1/dir2 == ${TESTDIR}
T [0-9-]* [0-9:]* ${PLUS}0000 ${username} first-dir \[third-dive:A\]
F [0-9-]* [0-9:]* ${PLUS}0000 ${username}                     =first-dir= ${TESTDIR}/\*
T [0-9-]* [0-9:]* ${PLUS}0000 ${username} first-dir \[rtagged-by-head:A\]
T [0-9-]* [0-9:]* ${PLUS}0000 ${username} first-dir \[rtagged-by-tag:rtagged-by-head\]
T [0-9-]* [0-9:]* ${PLUS}0000 ${username} first-dir \[rtagged-by-revision:1\.1\]
O [0-9-]* [0-9:]* ${PLUS}0000 ${username} \[1\.1\] first-dir           =first-dir= ${TESTDIR}/\*
U [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.2 file6     first-dir           == ${TESTDIR}/first-dir
W [0-9-]* [0-9:]* ${PLUS}0000 ${username}     file7     first-dir           == ${TESTDIR}/first-dir" \
"O [0-9-]* [0-9:]* ${PLUS}0000 ${username} first-dir           =first-dir= <remote>/\*
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file6     first-dir           == <remote>
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file7     first-dir           == <remote>
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file6     first-dir/dir1      == <remote>
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file7     first-dir/dir1      == <remote>
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file6     first-dir/dir1/dir2 == <remote>
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file7     first-dir/dir1/dir2 == <remote>
T [0-9-]* [0-9:]* ${PLUS}0000 ${username} first-dir \[second-dive:A\]
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file14    first-dir           == <remote>
M [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.2 file6     first-dir           == <remote>
R [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.2 file7     first-dir           == <remote>
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file14    first-dir/dir1      == <remote>
M [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.2 file6     first-dir/dir1      == <remote>
R [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.2 file7     first-dir/dir1      == <remote>
A [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.1 file14    first-dir/dir1/dir2 == <remote>
M [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.2 file6     first-dir/dir1/dir2 == <remote>
R [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.2 file7     first-dir/dir1/dir2 == <remote>
T [0-9-]* [0-9:]* ${PLUS}0000 ${username} first-dir \[third-dive:A\]
F [0-9-]* [0-9:]* ${PLUS}0000 ${username}                     =first-dir= <remote>/\*
T [0-9-]* [0-9:]* ${PLUS}0000 ${username} first-dir \[rtagged-by-head:A\]
T [0-9-]* [0-9:]* ${PLUS}0000 ${username} first-dir \[rtagged-by-tag:rtagged-by-head\]
T [0-9-]* [0-9:]* ${PLUS}0000 ${username} first-dir \[rtagged-by-revision:1\.1\]
O [0-9-]* [0-9:]* ${PLUS}0000 ${username} \[1\.1\] first-dir           =first-dir= <remote>/\*
P [0-9-]* [0-9:]* ${PLUS}0000 ${username} 1\.2 file6     first-dir           == <remote>
W [0-9-]* [0-9:]* ${PLUS}0000 ${username}     file7     first-dir           == <remote>"
	  fi

	  dokeep
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir \
			     $CVSROOT_DIRNAME/second-dir
	  ;;



	ls)
	  # Test the ls & rls commands.  There are some tests of
	  # Interaction of ls, rls, and branches in branches2.
	  mkdir ls; cd ls
	  dotest ls-init-1 "$testcvs -Q co -dtop ."
	  cd top
	  dotest ls-1 "$testcvs ls CVSROOT" \
"access
aclconfig
checkoutlist
commitinfo
config
cvswrappers
group
loginfo
modules
notify
postadmin
postproxy
posttag
postwatch
preproxy
rcsinfo
taginfo
verifymsg"
	  dotest ls-2 "$testcvs ls -R" \
"\.:
CVSROOT

CVSROOT:
access
aclconfig
checkoutlist
commitinfo
config
cvswrappers
group
loginfo
modules
notify
postadmin
postproxy
posttag
postwatch
preproxy
rcsinfo
taginfo
verifymsg"
	  # This used to cause a fatal error.
	  modify_repo mkdir $CVSROOT_DIRNAME/notcheckedout
	  dotest ls-3 "$testcvs ls -RP" \
"\.:
CVSROOT
notcheckedout

CVSROOT:
access
aclconfig
checkoutlist
commitinfo
config
cvswrappers
group
loginfo
modules
notify
postadmin
postproxy
posttag
postwatch
preproxy
rcsinfo
taginfo
verifymsg"

	  # Make sure the previous command did not create the notcheckedout
	  # directory.
	  dotest_fail ls-4 "test -d notcheckedout"

	  dotest ls-5 "$testcvs ls -R" \
"\.:
CVSROOT
notcheckedout

CVSROOT:
access
aclconfig
checkoutlist
commitinfo
config
cvswrappers
group
loginfo
modules
notify
postadmin
postproxy
posttag
postwatch
preproxy
rcsinfo
taginfo
verifymsg

notcheckedout:"
	  dotest_fail ls-6 "test -d notcheckedout"

	  # Several test for ls -d, which shows dead revisions

	  # Set up the dead files
	  mkdir cemetery
	  dotest ls-d-init-1 "$testcvs -Q add cemetery"
	  cd cemetery
	  touch dead living
	  dotest ls-d-init-2 "$testcvs -Q add dead living"
	  dotest ls-d-init-3 "$testcvs -Q ci -mm dead living"
	  dotest ls-d-init-4 "$testcvs -Q tag -b branch"
	  dotest ls-d-init-5 "$testcvs -Q up -A"
	  rm dead
	  dotest ls-d-init-6 "$testcvs -Q rm dead"
	  dotest ls-d-init-7 "$testcvs -Q ci -mm dead"
	  dotest ls-d-init-8 "$testcvs -Q up -r branch"
	  rm dead
	  dotest ls-d-init-9 "$testcvs -Q rm dead"
	  dotest ls-d-init-10 "$testcvs -Q ci -mm dead"

	  # Possible output
	  output_living="living"
	  output_dead="dead
living"

	  # The basic test is to make sure that dead revisions are shown if and
	  # only if -d is speficified (and that live revisions are always
	  # shown).  The following test cases cover all combinations of these
	  # factors:
	  #
	  #    + Working directory is on branch or trunk
	  #    + ls or rls
	  #    + implicit branch, explicit trunk, or explicit branch
	  #    + -d present or absent

	  # Working directory on trunk
	  $testcvs -Q up -A

	  ## ls
	  dotest ls-d-1 "$testcvs ls" "$output_living"
	  dotest ls-d-2 "$testcvs ls -d" "$output_dead"

	  dotest ls-d-3 "$testcvs ls -rHEAD" "$output_living"
	  dotest ls-d-4 "$testcvs ls -drHEAD" "$output_dead"

	  dotest ls-d-5 "$testcvs ls -rbranch" "$output_living"
	  dotest ls-d-6 "$testcvs ls -drbranch" "$output_dead"

	  ## rls
	  dotest ls-d-7 "$testcvs rls cemetery" \
"$SPROG rls: Listing module: \`cemetery'
$output_living"
	  dotest ls-d-8 "$testcvs rls -d cemetery" \
"$SPROG rls: Listing module: \`cemetery'
$output_dead"

	  dotest ls-d-9 "$testcvs -q rls -rHEAD cemetery" "$output_living"
	  dotest ls-d-10 "$testcvs -q rls -drHEAD cemetery" "$output_dead"

	  dotest ls-d-11 "$testcvs -q rls -rbranch cemetery" "$output_living"
	  dotest ls-d-12 "$testcvs -q rls -drbranch cemetery" "$output_dead"

	  # Working directory on branch
	  $testcvs -Q up -r branch

	  ## ls
	  dotest ls-d-13 "$testcvs ls" "$output_living"
	  dotest ls-d-14 "$testcvs ls -d" "$output_dead"

	  dotest ls-d-15 "$testcvs ls -r HEAD" "$output_living"
	  dotest ls-d-16 "$testcvs ls -d -r HEAD" "$output_dead"

	  dotest ls-d-17 "$testcvs ls -r branch" "$output_living"
	  dotest ls-d-18 "$testcvs ls -d -r branch" "$output_dead"

	  ## rls
	  dotest ls-d-19 "$testcvs -q rls cemetery" "$output_living"
	  dotest ls-d-20 "$testcvs -q rls -d cemetery" "$output_dead"

	  dotest ls-d-21 "$testcvs -q rls -rHEAD cemetery" "$output_living"
	  dotest ls-d-22 "$testcvs -q rls -drHEAD cemetery" "$output_dead"

	  dotest ls-d-23 "$testcvs -q rls -rbranch cemetery" "$output_living"
	  dotest ls-d-24 "$testcvs -q rls -drbranch cemetery" "$output_dead"

	  # Some tests to cover specifying a file name as an option
	  # Combinations of factors:
	  #
	  #  + file in CVS/Entries or not
	  #  + current directory or subdirectory
	  #  + file dead or not

	  # Switch back to the trunk
	  $testcvs -Q up -A

	  ## file in CVS/Entries
	  dotest ls-filename-1 "$testcvs ls dead"

	  # ls'ing a file that already exists once caused an assertion failure.
	  dotest ls-filename-2 "$testcvs ls living" "living"

	  cd ..
	  dotest ls-filename-3 "$testcvs ls cemetery/dead"

	  # ls'ing a file that already exists once caused an assertion failure.
	  dotest ls-filename-4 "$testcvs ls cemetery/living" "cemetery/living"
	  cd cemetery

	  ## file not in CVS/Entries
	  echo D > CVS/Entries

	  dotest ls-filename-5 "$testcvs ls dead"

	  # ls'ing a file that already exists once caused an assertion failure.
	  dotest ls-filename-6 "$testcvs ls living" "living"

	  cd ..
	  dotest ls-filename-7 "$testcvs ls cemetery/dead"

	  # ls'ing a file that already exists once caused an assertion failure.
	  dotest ls-filename-8 "$testcvs ls cemetery/living" "cemetery/living"

	  cd cemetery

	  # Test the -D date option to cvs ls

	  # try and list a file before it's created, during an old revision, in
	  # a period when it was dead and in the future
	  time_prebirth=`date '+%Y-%m-%d %H:%M:%S'` ; sleep 1
	  touch dated
	  dotest ls-D-init-1 "$testcvs -Q add dated"
	  dotest ls-D-init-2 "$testcvs -Q ci -mm dated"
	  time_newborn=`date '+%Y-%m-%d %H:%M:%S'` ; sleep 1
	  echo mm >> dated
	  dotest ls-D-init-2 "$testcvs -Q ci -mm dated"
	  time_predeath=`date '+%Y-%m-%d %H:%M:%S'` ; sleep 1
	  rm dated
	  dotest ls-D-init-3 "$testcvs -Q rm dated"
	  dotest ls-D-init-4 "$testcvs -Q ci -mm dated"
	  time_postdeath=`date '+%Y-%m-%d %H:%M:%S'`

	  dotest ls-D-1 "$testcvs ls -D '$time_prebirth' -e dated"

	  # ls'ing a file that already exists once caused an assertion failure.
	  dotest ls-D-2 "$testcvs ls -D '$time_newborn' -e dated" \
"/dated/1\.1/.*"

	  # ls'ing a file that already exists once caused an assertion failure.
	  dotest ls-D-3 "$testcvs ls -D '$time_predeath' -e dated" \
"/dated/1.2/.*"

	  dotest ls-D-4 "$testcvs ls -D '$time_postdeath' -e dated"

	  dokeep
	  cd ../../..
	  rm -r ls
	  modify_repo rm -rf $CVSROOT_DIRNAME/notcheckedout \
			     $CVSROOT_DIRNAME/cemetery
	  unset output_living output_dead
	  ;;



	parseroot)
	  mkdir 1; cd 1
	  # Test odd cases involving CVSROOT.  At the moment, that means we
	  # are testing roots with '/'s on the end, which CVS should parse off.
	  CVSROOT_save=${CVSROOT}
	  CVSROOT="${CVSROOT}/////"
	  dotest parseroot-1 "${testcvs} -q co CVSROOT/modules" \
"U CVSROOT/modules"
	  dotest parseroot-2 "${testcvs} -q ci -fmnull-change CVSROOT/modules" \
"$CVSROOT_DIRNAME/CVSROOT/modules,v  <--  CVSROOT/modules
new revision: 1\.2; previous revision: 1\.1
$SPROG commit: Rebuilding administrative file database"

	  if $remote; then
	    # I only test these when testing remote in case CVS was compiled
	    # without client support.

	    # logout does not try to contact the server.
	    CVSROOT=":pserver;proxy=localhost;proxyport=8080:localhost/dev/null"
	    dotest parseroot-3r "$testcvs -d'$CVSROOT' logout" \
"Logging out of :pserver:$username@localhost:2401/dev/null
$CPROG logout: warning: failed to open $HOME/\.cvspass for reading: No such file or directory
$CPROG logout: Entry not found."
	    CVSROOT=":pserver;proxyport=8080:localhost/dev/null"
	    dotest_fail parseroot-4r "$testcvs -d'$CVSROOT' logout" \
"$CPROG logout: Proxy port specified in CVSROOT without proxy host\.
$CPROG \[logout aborted\]: Bad CVSROOT: \`:pserver;proxyport=8080:localhost/dev/null'\."
	    CVSROOT=":pserver;optionnoarg:localhost/dev/null"
	    dotest_fail parseroot-5r "$testcvs -d'$CVSROOT' logout" \
"$CPROG logout: Option (\`optionnoarg') has no argument in CVSROOT\.
$CPROG \[logout aborted\]: Bad CVSROOT: \`:pserver;optionnoarg:localhost/dev/null'\."
	    CVSROOT=":pserver;notanoption=anything:localhost/dev/null"
	    dotest_fail parseroot-6r "$testcvs -d'$CVSROOT' logout" \
"$CPROG logout: Unknown option (\`notanoption') in CVSROOT\.
$CPROG \[logout aborted\]: Bad CVSROOT: \`:pserver;notanoption=anything:localhost/dev/null'\."
	    CVSROOT=":local;proxy=localhost:/dev/null"
	    dotest_fail parseroot-7r "$testcvs -d'$CVSROOT' logout" \
"$CPROG logout: CVSROOT proxy specification is only valid for gserver and
$CPROG logout: pserver connection methods\.
$CPROG \[logout aborted\]: Bad CVSROOT: \`:local;proxy=localhost:/dev/null'\."
	    CVSROOT="::pserver@anonymous@test.org:/cvs"
	    dotest_fail parseroot-8r "$testcvs -d'$CVSROOT' co test" \
"$CPROG checkout: Unknown method (\`') in CVSROOT\.
$CPROG \[checkout aborted\]: Bad CVSROOT: \`$CVSROOT'\."
	  fi

	  dokeep

	  # Clean up
	  CVSROOT=$CVSROOT_save
	  cd ..
	  rm -r 1
	  ;;



	files)
	  # Test of how we specify files on the command line
	  # (recurse.c and that sort of thing).  Vaguely similar to
	  # tests like basic* and deep.  See modules and such tests
	  # for what happens when we throw in modules and co -d, &c.

	  # This particular test is fairly carefully crafted, to spot
	  # one particular issue with remote.
	  mkdir 1; cd 1
	  dotest files-1 "${testcvs} -q co -l ." ""
	  mkdir first-dir
	  dotest files-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  touch tfile
	  dotest files-3 "${testcvs} add tfile" \
"${SPROG} add: scheduling file .tfile. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest files-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/tfile,v  <--  tfile
initial revision: 1\.1"
	  dotest files-5 "${testcvs} -q tag -b C" "T tfile"
	  dotest files-6 "${testcvs} -q update -r C" ""
	  mkdir dir
	  dotest files-7 "${testcvs} add dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir/dir added to the repository
--> Using per-directory sticky tag .C'"
	  cd dir
	  touch .file
	  dotest files-7b "${testcvs} add .file" \
"${SPROG} add: scheduling file .\.file' for addition on branch .C.
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  mkdir sdir
	  dotest files-7c "${testcvs} add sdir" \
"Directory ${CVSROOT_DIRNAME}/first-dir/dir/sdir added to the repository
--> Using per-directory sticky tag .C'"
	  cd sdir
	  mkdir ssdir
	  dotest files-8 "${testcvs} add ssdir" \
"Directory ${CVSROOT_DIRNAME}/first-dir/dir/sdir/ssdir added to the repository
--> Using per-directory sticky tag .C'"
	  cd ssdir
	  touch .file
	  dotest files-9 "${testcvs} add .file" \
"${SPROG} add: scheduling file .\.file' for addition on branch .C.
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  cd ../..
	  dotest files-10 "${testcvs} -q ci -m test" \
"$CVSROOT_DIRNAME/first-dir/dir/Attic/\.file,v  <--  \.file
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/dir/sdir/ssdir/Attic/\.file,v  <--  sdir/ssdir/\.file
new revision: 1\.1\.2\.1; previous revision: 1\.1"
	  dotest files-11 \
"${testcvs} commit -m test -f ./.file ./sdir/ssdir/.file" \
"${CVSROOT_DIRNAME}/first-dir/dir/Attic/\.file,v  <--  \.file
new revision: 1\.1\.2\.2; previous revision: 1\.1\.2\.1
${CVSROOT_DIRNAME}/first-dir/dir/sdir/ssdir/Attic/\.file,v  <--  \./sdir/ssdir/\.file
new revision: 1\.1\.2\.2; previous revision: 1\.1\.2\.1"
	  if $remote; then
	    # FIXCVS:
	    # This is a bug, looks like that toplevel_repos cruft in
	    # client.c is coming back to haunt us.
	    # May want to think about the whole issue, toplevel_repos
	    # has always been crufty and trying to patch it up again
	    # might be a mistake.
	    dotest files-12r \
"$testcvs commit -f -m test ./sdir/ssdir/.file ./.file" \
"$CVSROOT_DIRNAME/first-dir/dir/sdir/ssdir/Attic/\.file,v  <--  \./sdir/ssdir/\.file
new revision: 1\.1\.2\.3; previous revision: 1\.1\.2\.2"

	    # Sync up the version numbers so that the rest of the
	    # tests don't need to expect different numbers based
	    # local or remote.
	    dotest files-12rworkaround \
"$testcvs commit -f -m test .file" \
"$CVSROOT_DIRNAME/first-dir/dir/Attic/\.file,v  <--  \.file
new revision: 1\.1\.2\.3; previous revision: 1\.1\.2\.2"
	  else
	    dotest files-12 \
"${testcvs} commit -f -m test ./sdir/ssdir/.file ./.file" \
"${CVSROOT_DIRNAME}/first-dir/dir/sdir/ssdir/Attic/\.file,v  <--  \./sdir/ssdir/\.file
new revision: 1\.1\.2\.3; previous revision: 1\.1\.2\.2
${CVSROOT_DIRNAME}/first-dir/dir/Attic/\.file,v  <--  \.file
new revision: 1\.1\.2\.3; previous revision: 1\.1\.2\.2"
	  fi
	  dotest files-13 \
"${testcvs} commit -fmtest ./sdir/../sdir/ssdir/..///ssdir/.file" \
"${CVSROOT_DIRNAME}/first-dir/dir/sdir/ssdir/Attic/\.file,v  <--  \./sdir/\.\./sdir/ssdir/\.\.///ssdir/\.file
new revision: 1\.1\.2\.4; previous revision: 1\.1\.2\.3"
	  dotest files-14 \
"${testcvs} commit -fmtest ../../first-dir/dir/.file" \
"${CVSROOT_DIRNAME}/first-dir/dir/Attic/\.file,v  <--  \.\./\.\./first-dir/dir/\.file
new revision: 1\.1\.2\.4; previous revision: 1\.1\.2\.3"

	  dokeep
	  cd ../../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	spacefiles)
	  # More filename tests, in particular spaces in file names.
	  # (it might be better to just change a few of the names in
	  # basica or some other test instead, always good to keep the
	  # testsuite concise).

	  mkdir 1; cd 1
	  dotest spacefiles-1 "${testcvs} -q co -l ." ""
	  touch ./-c
	  dotest spacefiles-2 "${testcvs} add -- -c" \
"${SPROG} add: scheduling file .-c. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest spacefiles-3 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/-c,v  <--  -c
initial revision: 1\.1"
	  mkdir 'first dir'
	  dotest spacefiles-4 "${testcvs} add 'first dir'" \
"Directory ${CVSROOT_DIRNAME}/first dir added to the repository"
	  mkdir ./-b
	  dotest spacefiles-5 "${testcvs} add -- -b" \
"Directory ${CVSROOT_DIRNAME}/-b added to the repository"
	  cd 'first dir'
	  touch 'a file'
	  dotest spacefiles-6 "${testcvs} add 'a file'" \
"${SPROG} add: scheduling file .a file. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest spacefiles-7 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first dir/a file,v  <--  a file
initial revision: 1\.1"
	  dotest spacefiles-8 "${testcvs} -q tag new-tag" "T a file"
	  cd ../..

	  mkdir 2; cd 2
	  dotest spacefiles-10 "${testcvs} co -- -b" \
"${SPROG} checkout: Updating -b"
	  dotest spacefiles-11 "${testcvs} -q co -- -c" "U \./-c"
	  rm ./-c
	  dotest spacefiles-13 "${testcvs} -q co 'first dir'" \
"U first dir/a file"
	  cd ..

	  mkdir 3; cd 3
	  dotest spacefiles-14 "${testcvs} -q co 'first dir/a file'" \
"U first dir/a file"
	  cd ..

	  rm -r 1 2 3
	  modify_repo rm -rf "'$CVSROOT_DIRNAME/first dir'" \
			     $CVSROOT_DIRNAME/-b $CVSROOT_DIRNAME/-c,v
	  ;;



	commit-readonly)
	  mkdir 1; cd 1
	  module=x

	  : > junk
	  dotest commit-readonly-1 "$testcvs -Q import -m . $module X Y" ''
	  dotest commit-readonly-2 "$testcvs -Q co $module" ''
	  cd $module

	  file=m

	  # Include an rcs keyword to be expanded.
	  echo '$Id''$' > $file

	  dotest commit-readonly-3 "$testcvs add $file" \
"$SPROG add: scheduling file .$file. for addition
$SPROG add: use .$SPROG commit. to add this file permanently"
	  dotest commit-readonly-4 "$testcvs -Q ci -m . $file"

	  echo line2 >> $file
	  # Make the file read-only.
	  chmod a-w $file

	  dotest commit-readonly-5 "$testcvs -Q ci -m . $file"

	  dokeep
	  cd ../..
	  rm -rf 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/"$module"
	  ;;



	status)
		# This tests for a bug in the status command which failed to
		# notice resolved conflicts.
		mkdir status; cd status
		dotest status-init-1 "$testcvs -q co -l ."
		mkdir first-dir
		dotest status-init-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
		cd first-dir
		echo a line >tfile
		dotest status-init-3 "${testcvs} add tfile" \
"${SPROG} add: scheduling file .tfile. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
		dotest status-init-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/tfile,v  <--  tfile
initial revision: 1\.1"
		cd ..
		dotest status-init-5 "${testcvs} -q co -dsecond-dir first-dir" \
"U second-dir/tfile"
		cd second-dir
		echo some junk >>tfile
		dotest status-init-6 "${testcvs} -q ci -maline" \
"$CVSROOT_DIRNAME/first-dir/tfile,v  <--  tfile
new revision: 1\.2; previous revision: 1\.1"
		cd ../first-dir
		echo force a conflict >>tfile
		dotest status-init-7 "${testcvs} -q up" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/tfile,v
retrieving revision 1\.1
retrieving revision 1\.2
Merging differences between 1\.1 and 1\.2 into tfile
rcsmerge: warning: conflicts during merge
${SPROG} update: conflicts found in tfile
C tfile"

		# Now note our status
		dotest status-1 "${testcvs} status tfile" \
"===================================================================
File: tfile            	Status: Unresolved Conflict

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT_DIRNAME}/first-dir/tfile,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"

		# touch the file, leaving conflict markers in place
		# and note our status
		touch tfile
		dotest status-2 "${testcvs} status tfile" \
"===================================================================
File: tfile            	Status: File had conflicts on merge

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT_DIRNAME}/first-dir/tfile,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"

		# resolve the conflict
		echo resolution >tfile
		dotest status-3 "${testcvs} status tfile" \
"===================================================================
File: tfile            	Status: Locally Modified

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT_DIRNAME}/first-dir/tfile,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"

		# Check that there are no problems just using CVS/Root too.
		save_CVSROOT=$CVSROOT
		unset CVSROOT
		dotest status-3a "${testcvs} status tfile" \
"===================================================================
File: tfile            	Status: Locally Modified

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT_DIRNAME}/first-dir/tfile,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
		CVSROOT=$save_CVSROOT
		export CVSROOT

		# FIXCVS:
		# Update is supposed to re-Register() the file when it
		# finds resolved conflicts:
		dotest status-4 "grep 'Result of merge' CVS/Entries" \
"/tfile/1\.2/Result of merge${PLUS}[a-zA-Z0-9 :]*//"

                cd ..
                mkdir fourth-dir
                dotest status-init-8 "$testcvs add fourth-dir" \
"Directory $CVSROOT_DIRNAME/fourth-dir added to the repository"
                cd fourth-dir
                echo yet another line >t3file
                dotest status-init-9 "$testcvs add t3file" \
"$SPROG add: scheduling file .t3file. for addition
$SPROG add: use .$SPROG commit. to add this file permanently"
                dotest status-init-10 "$testcvs -q ci -m add" \
"$CVSROOT_DIRNAME/fourth-dir/t3file,v  <--  t3file
initial revision: 1\.1"
                cd ../first-dir
                mkdir third-dir
                dotest status-init-11 "$testcvs add third-dir" \
"Directory $CVSROOT_DIRNAME/first-dir/third-dir added to the repository"
                cd third-dir
                echo another line >t2file
                dotest status-init-12 "$testcvs add t2file" \
"$SPROG add: scheduling file .t2file. for addition
$SPROG add: use .$SPROG commit. to add this file permanently"
                dotest status-init-13 "$testcvs -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/third-dir/t2file,v  <--  t2file
initial revision: 1\.1"
                dotest status-5 "$testcvs status ../tfile" \
"===================================================================
File: tfile            	Status: Locally Modified

   Working revision:	1\.2.*
   Repository revision:	1\.2	$CVSROOT_DIRNAME/first-dir/tfile,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
                dotest status-6 "$testcvs status ../../fourth-dir/t3file" \
"===================================================================
File: t3file           	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	$CVSROOT_DIRNAME/fourth-dir/t3file,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"

		dokeep
		cd ../../..
		rm -rf status
		modify_repo rm -rf $CVSROOT_DIRNAME/first-dir \
				   $CVSROOT_DIRNAME/fourth-dir
		;;



	commit-readonlyfs)
	  mkdir 1; cd 1
	  module=x
	  : > junk
	  dotest commit-readonlyfs-1 "${testcvs} -Q import -m . $module X Y" ''
	  if $remote; then
	    dotest_fail commit-readonlyfs-2r1 "${testcvs} -Q -R co $module" \
"${CPROG} \[checkout aborted\]: Read-only repository feature unavailable with remote roots (cvsroot = ${CVSROOT_DIRNAME})"
	    dotest commit-readonlyfs-2r2 "${testcvs} -Q co $module" ''
          else
	    dotest commit-readonlyfs-2 "${testcvs} -Q -R co $module" ''
	    rm -rf $module
	    dotest commit-readonlyfs-2r3 "${testcvs} -q -R co $module" \
"U $module/junk"
	    rm -rf $module
	    dotest commit-readonlyfs-2r4 "${testcvs} -R co $module" \
"${SPROG}: WARNING: Read-only repository access mode selected via \`cvs -R'\.
Using this option to access a repository which some users write to may
cause intermittent sandbox corruption\.
${SPROG} checkout: Updating $module
U $module/junk"
          fi
	  cd $module
	  echo test > junk
	  if $remote; then
	    dotest_fail commit-readonlyfs-3r "${testcvs} -Q -R ci -m. junk" \
"${SPROG} \[commit aborted\]: Read-only repository feature unavailable with remote roots (cvsroot = ${CVSROOT_DIRNAME})"
	  else
	    dotest_fail commit-readonlyfs-3 "${testcvs} -Q -R ci -m. junk" \
"${SPROG} commit: write lock failed\.
WARNING: Read-only repository access mode selected via \`cvs -R'\.
Attempting to write to a read-only filesystem is not allowed\.
${SPROG} \[commit aborted\]: lock failed - giving up"
          fi

	  dokeep
	  cd ../..
	  rm -rf 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/"$module"
	  ;;



	rdiff)
		# Test rdiff
		# XXX for now this is just the most essential test...
		cd ${TESTDIR}

		mkdir testimport
		cd testimport
		echo '$''Id$' > foo
		echo '$''Name$' >> foo
		echo '$''Id$' > bar
		echo '$''Name$' >> bar
		dotest_sort rdiff-1 \
		  "${testcvs} import -I ! -m test-import-with-keyword trdiff TRDIFF T1" \
'

N trdiff/bar
N trdiff/foo
No conflicts created by this import'
		dotest rdiff-2 \
		  "${testcvs} co -ko trdiff" \
"${SPROG} checkout: Updating trdiff
U trdiff/bar
U trdiff/foo"
		cd trdiff
		echo something >> foo
		dotest rdiff-3 \
		  "${testcvs} ci -m added-something foo" \
"${CVSROOT_DIRNAME}/trdiff/foo,v  <--  foo
new revision: 1\.2; previous revision: 1\.1"
		echo '#ident	"@(#)trdiff:$''Name$:$''Id$"' > new
		echo "new file" >> new
		dotest rdiff-4 \
		  "${testcvs} add -m new-file-description new" \
"${SPROG} add: scheduling file \`new' for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
		dotest rdiff-5 \
		  "${testcvs} commit -m added-new-file new" \
"${CVSROOT_DIRNAME}/trdiff/new,v  <--  new
initial revision: 1\.1"
		dotest rdiff-6 \
		  "${testcvs} tag local-v0" \
"${SPROG} tag: Tagging .
T bar
T foo
T new"
		dotest rdiff-7 \
		  "${testcvs} status -v foo" \
"===================================================================
File: foo              	Status: Up-to-date

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT_DIRNAME}/trdiff/foo,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	-ko

   Existing Tags:
	local-v0                 	(revision: 1\.2)
	T1                       	(revision: 1\.1\.1\.1)
	TRDIFF                   	(branch: 1\.1\.1)"

		cd ..
		rm -r trdiff

		dotest rdiff-8 \
		  "${testcvs} rdiff -r T1 -r local-v0 trdiff" \
"${SPROG}"' rdiff: Diffing trdiff
Index: trdiff/foo
diff -c trdiff/foo:1\.1\.1\.1 trdiff/foo:1\.2
\*\*\* trdiff/foo:1\.1\.1\.1	'"${DATE}"'
--- trdiff/foo	'"${DATE}"'
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1,2 \*\*\*\*
! \$''Id: foo,v 1\.1\.1\.1 [0-9/]* [0-9:]* '"${username}"' Exp \$
! \$''Name: T1 \$
--- 1,3 ----
! \$''Id: foo,v 1\.2 [0-9/]* [0-9:]* '"${username}"' Exp \$
! \$''Name: local-v0 \$
! something
Index: trdiff/new
diff -c /dev/null trdiff/new:1\.1
\*\*\* /dev/null	'"${DATE}"'
--- trdiff/new	'"${DATE}"'
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 0 \*\*\*\*
--- 1,2 ----
'"${PLUS}"' #ident	"@(#)trdiff:\$''Name: local-v0 \$:\$''Id: new,v 1\.1 [0-9/]* [0-9:]* '"${username}"' Exp \$"
'"${PLUS}"' new file'

		dokeep
		cd ..
		rm -r testimport
		modify_repo rm -rf $CVSROOT_DIRNAME/trdiff
		;;



	rdiff-short)
	  # Test that the short patch behaves as expected
	  #   1) Added file.
	  #   2) Removed file.
	  #   3) Different revision number with no difference.
	  #   4) Different revision number with changes.
	  #   5) Against trunk.
	  #   6) Same revision number (no difference).
	  mkdir rdiff-short; cd rdiff-short
	  mkdir abc
	  dotest rdiff-short-init-1 \
"${testcvs} -q import -I ! -m initial-import abc vendor initial" \
'
No conflicts created by this import'

	  dotest rdiff-short-init-2 "${testcvs} -q get abc" ''
	  cd abc
	  echo "abc" >file1.txt
	  dotest rdiff-short-init-3 "${testcvs} add file1.txt" \
"${SPROG} add: scheduling file .file1\.txt' for addition
${SPROG} add: use \`${SPROG} commit' to add this file permanently"
	  dotest rdiff-short-init-4 \
"${testcvs} commit -madd-file1 file1.txt" \
"${CVSROOT_DIRNAME}/abc/file1\.txt,v  <--  file1\.txt
initial revision: 1\.1"
	  echo def >>file1.txt
	  dotest rdiff-short-init-5 \
"${testcvs} commit -mchange-file1 file1.txt" \
"${CVSROOT_DIRNAME}/abc/file1\.txt,v  <--  file1\.txt
new revision: 1\.2; previous revision: 1\.1"
	  echo "abc" >file1.txt
	  dotest rdiff-short-init-6 \
"${testcvs} commit -mrestore-file1-rev1 file1.txt" \
"${CVSROOT_DIRNAME}/abc/file1\.txt,v  <--  file1\.txt
new revision: 1\.3; previous revision: 1\.2"
	  dotest rdiff-short-init-7 \
"${testcvs} tag -r 1.1 tag1 file1.txt" \
"T file1\.txt"
	  dotest rdiff-short-init-8 \
"${testcvs} tag -r 1.2 tag2 file1.txt" \
"T file1\.txt"
	  dotest rdiff-short-init-9 \
"${testcvs} tag -r 1.3 tag3 file1.txt" \
"T file1\.txt"
	  echo "abc" >file2.txt
	  dotest rdiff-short-init-10 \
"${testcvs} add file2.txt" \
"${SPROG} add: scheduling file .file2\.txt' for addition
${SPROG} add: use \`${SPROG} commit' to add this file permanently"
	  dotest rdiff-add-remove-nodiff-init-11 \
"${testcvs} commit -madd-file2 file2.txt" \
"${CVSROOT_DIRNAME}/abc/file2\.txt,v  <--  file2\.txt
initial revision: 1\.1"
	  dotest rdiff-short-init-12 \
"${testcvs} tag -r 1.1 tag4 file2.txt" \
"T file2\.txt"
	  dotest rdiff-short-init-13 \
"${testcvs} tag -r 1.1 tag5 file2.txt" \
"T file2\.txt"
	  cd ../..
	  rm -fr rdiff-short

	  # 3) Different revision number with no difference.
	  dotest rdiff-short-no-real-change \
"${testcvs} -q rdiff -s -r tag1 -r tag3 abc"

	  # 4) Different revision number with changes.
	  dotest rdiff-short-real-change \
"${testcvs} -q rdiff -s -r tag1 -r tag2 abc" \
'File abc/file1.txt changed from revision 1\.1 to 1\.2'

	  # 1) Added file.
	  # 2) Removed file.
	  dotest_sort rdiff-short-remove-add \
"${testcvs} -q rdiff -s -r tag2 -r tag4 abc" \
'File abc/file1\.txt is removed; tag2 revision 1\.2
File abc/file2\.txt is new; tag4 revision 1\.1'

	  # 6) Same revision number (no difference).
	  dotest rdiff-short-no-change \
"${testcvs} -q rdiff -s -r tag4 -r tag5 abc"

	  # 5) Against trunk.
	  # Check that the messages change when we diff against the trunk
	  # rather than a tag or date.
	  dotest rdiff-short-against-trunk-1 \
"${testcvs} -q rdiff -s -rtag4 abc" \
"File abc/file1\.txt is new; current revision 1\.3"

	  dotest rdiff-short-against-trunk-2 \
"${testcvs} -q rdiff -s -rtag2 abc" \
"File abc/file1\.txt changed from revision 1\.2 to 1\.3
File abc/file2\.txt is new; current revision 1\.1"

	  modify_repo rm -rf $CVSROOT_DIRNAME/abc
	  ;;



	rdiff2)
	  # Test for the segv problem reported by James Cribb
	  # Somewhere to work
	  mkdir rdiff2; cd rdiff2	  
	  # Create a module "m" with files "foo" and "d/bar"
	  mkdir m; cd m
	  echo foo >foo
	  mkdir d
	  echo bar >d/bar
	  dotest_sort  rdiff2-1 \
"${testcvs} -q import -I ! -m initial-import m vendor initial" \
'

N m/d/bar
N m/foo
No conflicts created by this import'

	  cd ..
	  rm -r m
	  
	  # Remove "foo"
	  dotest rdiff2-2 "${testcvs} get m" \
"${SPROG} checkout: Updating m
U m/foo
${SPROG} checkout: Updating m/d
U m/d/bar"
	  cd m
	  dotest rdiff2-3 "${testcvs} rm -f foo" \
"${SPROG} remove: scheduling .foo. for removal
${SPROG} remove: use .${SPROG} commit. to remove this file permanently"

	  dotest rdiff2-4 "${testcvs} commit -m Removed foo" \
"${CVSROOT_DIRNAME}/m/foo,v  <--  foo
new revision: delete; previous revision: 1\.1\.1\.1"

	  # Modify "d/bar"
	  echo foo >d/bar
	  dotest rdiff2-5 "${testcvs} commit -m Changed d/bar" \
"${CVSROOT_DIRNAME}/m/d/bar,v  <--  d/bar
new revision: 1\.2; previous revision: 1\.1"
	  
	  # Crash before showing d/bar diffs
	  dotest_fail rdiff2-6 "${testcvs} rdiff -t m" \
"${SPROG} rdiff: Diffing m
${SPROG} rdiff: Diffing m/d
Index: m/d/bar
diff -c m/d/bar:1\.1\.1\.1 m/d/bar:1\.2
\*\*\* m/d/bar:1\.1\.1\.1	${DATE}
--- m/d/bar	${DATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
! bar
--- 1 ----
! foo"

	  dokeep
	  cd ../..
	  rm -rf rdiff2
	  modify_repo rm -rf $CVSROOT_DIRNAME/m
	  ;;



	diff)
	  # Various tests specific to the "cvs diff" command.
	  # Related tests:
	  #   death2: -N
	  #   rcslib: cvs diff and $Name.
	  #   rdiff: cvs rdiff.
	  #   diffmerge*: nuts and bolts (stuff within diff library)
	  mkdir 1; cd 1
	  dotest diff-1 "$testcvs -q co -l ."
	  mkdir first-dir
	  dotest diff-2 "$testcvs add first-dir" \
"Directory $CVSROOT_DIRNAME/first-dir added to the repository"
	  cd first-dir

	  # diff is anomalous.  Most CVS commands print the "nothing
	  # known" message (or worse yet, no message in some cases) but
	  # diff says "I know nothing".  Shrug.
	  dotest_fail diff-3 "${testcvs} diff xyzpdq" \
"${SPROG} diff: I know nothing about xyzpdq"
	  touch abc
	  dotest diff-4 "${testcvs} add abc" \
"${SPROG} add: scheduling file .abc. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest diff-5 "${testcvs} -q ci -mtest" \
"$CVSROOT_DIRNAME/first-dir/abc,v  <--  abc
initial revision: 1\.1"
	  echo "extern int gethostname ();" >abc
	  dotest diff-6 "${testcvs} -q ci -mtest" \
"$CVSROOT_DIRNAME/first-dir/abc,v  <--  abc
new revision: 1\.2; previous revision: 1\.1"
	  echo "#include <winsock.h>" >abc
	  # check the behavior of the --ifdef=MACRO option
	  dotest_fail diff-7 "${testcvs} -q diff --ifdef=HAVE_WINSOCK_H" \
"Index: abc
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/abc,v
retrieving revision 1\.2
diff --ifdef HAVE_WINSOCK_H -r1\.2 abc
#ifndef HAVE_WINSOCK_H
extern int gethostname ();
#else /\* HAVE_WINSOCK_H \*/
#include <winsock\.h>
#endif /\* HAVE_WINSOCK_H \*/"

	  dokeep
	  cd ../..
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  rm -r 1
	  ;;



	diffnl)
	  # Test handling of 'cvs diff' of files without newlines
	  mkdir 1; cd 1
	  dotest diffnl-000 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest diffnl-001 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
          cd first-dir

	  ${AWK} 'BEGIN {printf("one\ntwo\nthree\nfour\nfive\nsix")}' </dev/null >abc
	  dotest diffnl-002 "${testcvs} add abc" \
"${SPROG} add: scheduling file .abc. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
          dotest diffnl-003 "${testcvs} -q ci -mtest" \
"$CVSROOT_DIRNAME/first-dir/abc,v  <--  abc
initial revision: 1\.1"

	  # change to line near EOF
	  ${AWK} 'BEGIN {printf("one\ntwo\nthree\nfour\nsix")}' </dev/null >abc
	  dotest_fail diffnl-100 "${testcvs} diff abc" \
"Index: abc
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/abc,v
retrieving revision 1\.1
diff -r1\.1 abc
5d4
< five"
          dotest_fail diffnl-101 "${testcvs} diff -u abc" \
"Index: abc
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/abc,v
retrieving revision 1\.1
diff -u -r1\.1 abc
--- abc	${RFCDATE}	1\.1
+++ abc	${RFCDATE}
@@ -2,5 +2,4 @@
 two
 three
 four
-five
 six
\\\\ No newline at end of file"
          dotest diffnl-102 "${testcvs} -q ci -mtest abc" \
"$CVSROOT_DIRNAME/first-dir/abc,v  <--  abc
new revision: 1\.2; previous revision: 1\.1"

          # Change to last line
	  ${AWK} 'BEGIN {printf("one\ntwo\nthree\nfour\nseven")}' </dev/null >abc
          dotest_fail diffnl-200 "${testcvs} diff abc" \
"Index: abc
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/abc,v
retrieving revision 1\.2
diff -r1\.2 abc
5c5
< six
\\\\ No newline at end of file
---
> seven
\\\\ No newline at end of file"
	  dotest_fail diffnl-201 "${testcvs} diff -u abc" \
"Index: abc
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/abc,v
retrieving revision 1\.2
diff -u -r1\.2 abc
--- abc	${RFCDATE}	1\.2
+++ abc	${RFCDATE}
@@ -2,4 +2,4 @@
 two
 three
 four
-six
\\\\ No newline at end of file
+seven
\\\\ No newline at end of file"
	  dotest diffnl-202 "${testcvs} ci -mtest abc" \
"${CVSROOT_DIRNAME}/first-dir/abc,v  <--  abc
new revision: 1\.3; previous revision: 1\.2"

	  # Addition of newline
	  echo "one
two
three
four
seven" > abc
	  dotest_fail diffnl-300 "${testcvs} diff abc" \
"Index: abc
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/abc,v
retrieving revision 1\.3
diff -r1\.3 abc
5c5
< seven
\\\\ No newline at end of file
---
> seven"
	  dotest_fail diffnl-301 "${testcvs} diff -u abc" \
"Index: abc
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/abc,v
retrieving revision 1\.3
diff -u -r1\.3 abc
--- abc	${RFCDATE}	1\.3
+++ abc	${RFCDATE}
@@ -2,4 +2,4 @@
 two
 three
 four
-seven
\\\\ No newline at end of file
+seven"
	  dotest diffnl-302 "${testcvs} ci -mtest abc" \
"${CVSROOT_DIRNAME}/first-dir/abc,v  <--  abc
new revision: 1\.4; previous revision: 1\.3"

	  # Removal of newline
	  ${AWK} 'BEGIN {printf("one\ntwo\nthree\nfour\nseven")}' </dev/null >abc
	  dotest_fail diffnl-400 "${testcvs} diff abc" \
"Index: abc
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/abc,v
retrieving revision 1\.4
diff -r1\.4 abc
5c5
< seven
---
> seven
\\\\ No newline at end of file"
	  dotest_fail diffnl-401 "${testcvs} diff -u abc" \
"Index: abc
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/abc,v
retrieving revision 1\.4
diff -u -r1\.4 abc
--- abc	${RFCDATE}	1\.4
+++ abc	${RFCDATE}
@@ -2,4 +2,4 @@
 two
 three
 four
-seven
+seven
\\\\ No newline at end of file"

	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	death)
		# next dive.  test death support.

		# NOTE: this section has reached the size and
		# complexity where it is getting to be a good idea to
		# add new death support tests to a new section rather
		# than continuing to piggyback them onto the tests here.

		modify_repo mkdir $CVSROOT_DIRNAME/first-dir
		dotest death-init-1 "$testcvs -Q co first-dir"

		cd first-dir

		# Create a directory with only dead files, to make sure CVS
		# doesn't get confused by it.
		mkdir subdir
		dotest 65a0 "${testcvs} add subdir" \
"Directory ${CVSROOT_DIRNAME}/first-dir/subdir added to the repository"
		cd subdir
		echo file in subdir >sfile
		dotest 65a1 "${testcvs} add sfile" \
"${SPROG}"' add: scheduling file `sfile'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
		dotest 65a2 "${testcvs} -q ci -m add-it" \
"$CVSROOT_DIRNAME/first-dir/subdir/sfile,v  <--  sfile
initial revision: 1\.1"
		rm sfile
		dotest 65a3 "${testcvs} rm sfile" \
"${SPROG}"' remove: scheduling `sfile'\'' for removal
'"${SPROG}"' remove: use .'"${SPROG}"' commit. to remove this file permanently'
		dotest 65a4 "${testcvs} -q ci -m remove-it" \
"$CVSROOT_DIRNAME/first-dir/subdir/sfile,v  <--  sfile
new revision: delete; previous revision: 1\.1"
		cd ..
		dotest 65a5 "${testcvs} -q update -P" ''
		dotest_fail 65a6 "test -d subdir" ''

		# add a file.
		touch file1
		if ${CVS} add file1  2>> ${LOGFILE}; then
		    pass 66
		else
		    fail 66
		fi

		# commit
		if ${CVS} ci -m test  >> ${LOGFILE} 2>&1; then
		    pass 67
		else
		    fail 67
		fi

		# remove
		rm file1
		if ${CVS} rm file1  2>> ${LOGFILE}; then
		    pass 68
		else
		    fail 68
		fi

		# commit
		if ${CVS} ci -m test  >>${LOGFILE} ; then
		    pass 69
		else
		    fail 69
		fi

		dotest_fail 69a0 "test -f file1" ''
		# get the old contents of file1 back
		if ${testcvs} update -p -r 1.1 file1 >file1 2>>${LOGFILE}; then
		  pass 69a1
		else
		  fail 69a1
		fi
		dotest 69a2 "cat file1" ''

		# create second file
		touch file2
		if ${CVS} add file1 file2  2>> ${LOGFILE}; then
		    pass 70
		else
		    fail 70
		fi

		# commit
		if ${CVS} ci -m test  >> ${LOGFILE} 2>&1; then
		    pass 71
		else
		    fail 71
		fi

		# log
		if ${CVS} log file1  >> ${LOGFILE}; then
		    pass 72
		else
		    fail 72
		fi

		# file4 will be dead at the time of branching and stay dead.
		echo file4 > file4
		dotest death-file4-add "${testcvs} add file4" \
"${SPROG}"' add: scheduling file `file4'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
		dotest death-file4-ciadd "${testcvs} -q ci -m add file4" \
"$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
initial revision: 1\.1"
		rm file4
		dotest death-file4-rm "${testcvs} remove file4" \
"${SPROG}"' remove: scheduling `file4'\'' for removal
'"${SPROG}"' remove: use .'"${SPROG}"' commit. to remove this file permanently'
		dotest death-file4-cirm "${testcvs} -q ci -m remove file4" \
"$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
new revision: delete; previous revision: 1\.1"

		# Tag the branchpoint.
		dotest death-72a "${testcvs} -q tag bp_branch1" 'T file1
T file2'

		# branch1
		if ${CVS} tag -b branch1  ; then
		    pass 73
		else
		    fail 73
		fi

		# and move to the branch.
		if ${CVS} update -r branch1  ; then
		    pass 74
		else
		    fail 74
		fi

		dotest_fail death-file4-3 "test -f file4" ''

		# add a file in the branch
		echo line1 from branch1 >> file3
		if ${CVS} add file3  2>> ${LOGFILE}; then
		    pass 75
		else
		    fail 75
		fi

		# commit
		if ${CVS} ci -m test  >> ${LOGFILE} 2>&1; then
		    pass 76
		else
		    fail 76
		fi

		dotest death-76a0 \
"${testcvs} -q rdiff -r bp_branch1 -r branch1 first-dir" \
"Index: first-dir/file3
diff -c /dev/null first-dir/file3:1\.1\.2\.1
\*\*\* /dev/null	${DATE}
--- first-dir/file3	${DATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 0 \*\*\*\*
--- 1 ----
${PLUS} line1 from branch1"
		dotest death-76a1 \
"${testcvs} -q rdiff -r branch1 -r bp_branch1 first-dir" \
"Index: first-dir/file3
diff -c first-dir/file3:1\.1\.2\.1 first-dir/file3:removed
\*\*\* first-dir/file3:1\.1\.2\.1	${DATE}
--- first-dir/file3	${DATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
- line1 from branch1
--- 0 ----"

		# remove
		rm file3
		if ${CVS} rm file3  2>> ${LOGFILE}; then
		    pass 77
		else
		    fail 77
		fi

		# commit
		if ${CVS} ci -m test  >>${LOGFILE} ; then
		    pass 78
		else
		    fail 78
		fi

		# add again
		echo line1 from branch1 >> file3
		if ${CVS} add file3  2>> ${LOGFILE}; then
		    pass 79
		else
		    fail 79
		fi

		# commit
		if ${CVS} ci -m test  >> ${LOGFILE} 2>&1; then
		    pass 80
		else
		    fail 80
		fi

		# change the first file
		echo line2 from branch1 >> file1

		# commit
		if ${CVS} ci -m test  >> ${LOGFILE} 2>&1; then
		    pass 81
		else
		    fail 81
		fi

		# remove the second
		rm file2
		if ${CVS} rm file2  2>> ${LOGFILE}; then
		    pass 82
		else
		    fail 82
		fi

		# commit
		if ${CVS} ci -m test  >>${LOGFILE}; then
		    pass 83
		else
		    fail 83
		fi

		# back to the trunk.
		if ${CVS} update -A  2>> ${LOGFILE}; then
		    pass 84
		else
		    fail 84
		fi

		dotest_fail death-file4-4 "test -f file4" ''

		if test -f file3 ; then
		    fail 85
		else
		    pass 85
		fi

		# join
		dotest death-86 "$testcvs -q update -j branch1" \
"RCS file: $CVSROOT_DIRNAME/first-dir/file1,v
retrieving revision 1\.3
retrieving revision 1\.3\.2\.1
Merging differences between 1\.3 and 1\.3\.2\.1 into file1
${SPROG} update: scheduling \`file2' for removal
U file3"

		dotest_fail death-file4-5 "test -f file4" ''

		if test -f file3 ; then
		    pass 87
		else
		    fail 87
		fi

		# Make sure that we joined the correct change to file1
		if echo line2 from branch1 | cmp - file1 >/dev/null; then
		    pass 87a
		else
		    fail 87a
		fi

		# update
		if ${CVS} update  ; then
		    pass 88
		else
		    fail 88
		fi

		# commit
		dotest 89 "${testcvs} -q ci -m test" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.4; previous revision: 1\.3
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: delete; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file3,v  <--  file3
new revision: 1\.2; previous revision: 1\.1"
		cd ..
		mkdir 2
		cd 2
		dotest 89a "${testcvs} -q co first-dir" 'U first-dir/file1
U first-dir/file3'
		cd ..
		rm -r 2
		cd first-dir

		# remove first file.
		rm file1
		if ${CVS} rm file1  2>> ${LOGFILE}; then
		    pass 90
		else
		    fail 90
		fi

		# commit
		if ${CVS} ci -m test  >>${LOGFILE}; then
		    pass 91
		else
		    fail 91
		fi

		if test -f file1 ; then
		    fail 92
		else
		    pass 92
		fi

		# typo; try to get to the branch and fail
		dotest_fail 92.1a "$testcvs update -r brnach1" \
		  "$SPROG \[update aborted\]: no such tag \`brnach1'"
		# Make sure we are still on the trunk
		if test -f file1 ; then
		    fail 92.1b
		else
		    pass 92.1b
		fi
		if test -f file3 ; then
		    pass 92.1c
		else
		    fail 92.1c
		fi

		# back to branch1
		if ${CVS} update -r branch1  2>> ${LOGFILE}; then
		    pass 93
		else
		    fail 93
		fi

		dotest_fail death-file4-6 "test -f file4" ''

		if test -f file1 ; then
		    pass 94
		else
		    fail 94
		fi

		# and join
		dotest 95 "${testcvs} -q update -j HEAD" \
"${SPROG}"' update: file file1 has been modified, but has been removed in revision HEAD
'"${SPROG}"' update: file file3 exists, but has been added in revision HEAD'

		dotest_fail death-file4-7 "test -f file4" ''

		# file2 should not have been recreated.  It was
		# deleted on the branch, and has not been modified on
		# the trunk.  That means that there have been no
		# changes between the greatest common ancestor (the
		# trunk version) and HEAD.
		dotest_fail death-file2-1 "test -f file2" ''

		dokeep
		cd ..
		rm -r first-dir
		modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
		;;



	death2)
	  # More tests of death support.
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  dotest death2-1 "$testcvs -q co first-dir"

	  cd first-dir

	  # Add two files on the trunk.
	  echo "first revision" > file1
	  echo "file4 first revision" > file4
	  dotest death2-2 "${testcvs} add file1 file4" \
"${SPROG}"' add: scheduling file `file1'\'' for addition
'"${SPROG}"' add: scheduling file `file4'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add these files permanently'

	  dotest death2-3 "${testcvs} -q commit -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
initial revision: 1\.1"

	  # Make a branch and a non-branch tag.
	  dotest death2-4 "${testcvs} -q tag -b branch" \
'T file1
T file4'
	  dotest death2-5 "${testcvs} -q tag tag" \
'T file1
T file4'

	  # Switch over to the branch.
	  dotest death2-6 "${testcvs} -q update -r branch" ''

	  # Delete the file on the branch.
	  rm file1
	  dotest death2-7 "${testcvs} rm file1" \
"${SPROG} remove: scheduling .file1. for removal
${SPROG} remove: use .${SPROG} commit. to remove this file permanently"

	  # Test diff of the removed file before it is committed.
	  dotest_fail death2-diff-1 "${testcvs} -q diff file1" \
"${SPROG} diff: file1 was removed, no comparison available"

	  dotest_fail death2-diff-2 "${testcvs} -q diff -N -c file1" \
"Index: file1
===================================================================
RCS file: file1
diff -N file1
\*\*\* file1	${RFCDATE}	[0-9.]*
--- /dev/null	${RFCDATE_EPOCH}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
- first revision
--- 0 ----"

	  dotest death2-8 "${testcvs} -q ci -m removed" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: delete; previous revision: 1\.1"

	  # Test diff of a dead file.
	  dotest_fail death2-diff-3 \
"${testcvs} -q diff -r1.1 -rbranch -c file1" \
"${SPROG} diff: Tag branch refers to a dead (removed) revision in file .file1.\.
${SPROG} diff: No comparison available\.  Pass .-N. to .${SPROG} diff.${QUESTION}"
	  # and in reverse
	  dotest_fail death2-diff-3a \
"${testcvs} -q diff -rbranch -r1.1 -c file1" \
"${SPROG} diff: Tag branch refers to a dead (removed) revision in file .file1.\.
${SPROG} diff: No comparison available\.  Pass .-N. to .${SPROG} diff.${QUESTION}"

	  dotest_fail death2-diff-4 \
"${testcvs} -q diff -r1.1 -rbranch -N -c file1" \
"Index: file1
===================================================================
RCS file: file1
diff -N file1
\*\*\* file1	${RFCDATE}	[0-9.]*
--- /dev/null	${RFCDATE_EPOCH}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
- first revision
--- 0 ----"
	  # and in reverse
	  dotest_fail death2-diff-4a \
"${testcvs} -q diff -rbranch -r1.1 -N -c file1" \
"Index: file1
===================================================================
RCS file: file1
diff -N file1
\*\*\* /dev/null	${RFCDATE_EPOCH}
--- file1	${RFCDATE}	[0-9.]*
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 0 \*\*\*\*
--- 1 ----
+ first revision"


	  dotest_fail death2-diff-5 "${testcvs} -q diff -rtag -c ." \
"${SPROG} diff: file1 no longer exists, no comparison available"

	  dotest_fail death2-diff-6 "${testcvs} -q diff -rtag -N -c ." \
"Index: file1
===================================================================
RCS file: file1
diff -N file1
\*\*\* file1	[-a-zA-Z0-9: ]*	[0-9.]*
--- /dev/null	${RFCDATE_EPOCH}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
- first revision
--- 0 ----"

	  # Test rdiff of a dead file.
	  dotest death2-rdiff-1 \
"${testcvs} -q rtag -rbranch rdiff-tag first-dir" ''

	  dotest death2-rdiff-2 "${testcvs} -q rdiff -rtag -rbranch first-dir" \
"Index: first-dir/file1
diff -c first-dir/file1:1\.1 first-dir/file1:removed
\*\*\* first-dir/file1:1\.1	[a-zA-Z0-9: ]*
--- first-dir/file1	[a-zA-Z0-9: ]*
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
- first revision
--- 0 ----"

	  # Readd the file to the branch.
	  echo "second revision" > file1
	  dotest death2-9 "${testcvs} add file1" \
"${SPROG} add: Re-adding file \`file1' on branch \`branch' after dead revision 1\.1\.2\.1\.
${SPROG} add: use \`${SPROG} commit' to add this file permanently"

	  # Test diff of the added file before it is committed.
	  dotest_fail death2-diff-7 "${testcvs} -q diff file1" \
"${SPROG} diff: file1 is a new entry, no comparison available"

	  dotest_fail death2-diff-8 "${testcvs} -q diff -N -c file1" \
"Index: file1
===================================================================
RCS file: file1
diff -N file1
\*\*\* /dev/null	${RFCDATE_EPOCH}
--- file1	${RFCDATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 0 \*\*\*\*
--- 1 ----
${PLUS} second revision"

	  dotest death2-10 "${testcvs} -q commit -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.2; previous revision: 1\.1\.2\.1"

	  # Delete file4 from the branch
	  dotest death2-10a "${testcvs} rm -f file4" \
"${SPROG} remove: scheduling .file4. for removal
${SPROG} remove: use .${SPROG} commit. to remove this file permanently"
	  dotest death2-10b "${testcvs} -q ci -m removed" \
"$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
new revision: delete; previous revision: 1\.1"

	  # Back to the trunk.
	  dotest death2-11 "${testcvs} -q update -A" \
"[UP] file1
U file4"

	  # Add another file on the trunk.
	  echo "first revision" > file2
	  dotest death2-12 "${testcvs} add file2" \
"${SPROG}"' add: scheduling file `file2'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  dotest death2-13 "${testcvs} -q commit -m add" \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.1"

	  # Modify file4 on the trunk.
	  echo "new file4 revision" > file4
	  dotest death2-13a "${testcvs} -q commit -m mod" \
"$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
new revision: 1\.2; previous revision: 1\.1"

	  # Back to the branch.
	  # The ``no longer in the repository'' message doesn't really
	  # look right to me, but that's what CVS currently prints for
	  # this case.
	  dotest death2-14 "${testcvs} -q update -r branch" \
"[UP] file1
${SPROG} update: \`file2' is no longer in the repository
${SPROG} update: \`file4' is no longer in the repository"

	  # Add a file on the branch with the same name.
	  echo "branch revision" > file2
	  dotest death2-15 "${testcvs} add file2" \
"${SPROG}"' add: scheduling file `file2'\'' for addition on branch `branch'\''
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  dotest death2-16 "${testcvs} -q commit -m add" \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.1\.2\.2; previous revision: 1\.1\.2\.1"

	  # Add a new file on the branch.
	  echo "first revision" > file3
	  dotest death2-17 "${testcvs} add file3" \
"${SPROG}"' add: scheduling file `file3'\'' for addition on branch `branch'\''
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  dotest death2-18 "${testcvs} -q commit -m add" \
"$CVSROOT_DIRNAME/first-dir/Attic/file3,v  <--  file3
new revision: 1\.1\.2\.1; previous revision: 1\.1"

	  # Test diff of a nonexistent tag
	  dotest_fail death2-diff-9 "$testcvs -q diff -rtag -c file3" \
"$SPROG diff: tag tag is not in file file3"

	  dotest_fail death2-diff-10 "${testcvs} -q diff -rtag -N -c file3" \
"Index: file3
===================================================================
RCS file: file3
diff -N file3
\*\*\* /dev/null	${RFCDATE_EPOCH}
--- file3	${RFCDATE}	[0-9.]*
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 0 \*\*\*\*
--- 1 ----
${PLUS} first revision"

	  dotest_fail death2-diff-11 "${testcvs} -q diff -rtag -c ." \
"Index: file1
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.1
retrieving revision 1\.1\.2\.2
diff -c -r1\.1 -r1\.1\.2\.2
\*\*\* file1	${RFCDATE}	[0-9.]*
--- file1	${RFCDATE}	[0-9.]*
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
! first revision
--- 1 ----
! second revision
${SPROG} diff: tag tag is not in file file2
${SPROG} diff: tag tag is not in file file3
${SPROG} diff: file4 no longer exists, no comparison available"

	  dotest_fail death2-diff-12 "${testcvs} -q diff -rtag -c -N ." \
"Index: file1
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.1
retrieving revision 1\.1\.2\.2
diff -c -r1\.1 -r1\.1\.2\.2
\*\*\* file1	${RFCDATE}	[0-9.]*
--- file1	${RFCDATE}	[0-9.]*
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
! first revision
--- 1 ----
! second revision
Index: file2
===================================================================
RCS file: file2
diff -N file2
\*\*\* /dev/null	${RFCDATE_EPOCH}
--- file2	${RFCDATE}	[0-9.]*
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 0 \*\*\*\*
--- 1 ----
${PLUS} branch revision
Index: file3
===================================================================
RCS file: file3
diff -N file3
\*\*\* /dev/null	${RFCDATE_EPOCH}
--- file3	${RFCDATE}	[0-9.]*
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 0 \*\*\*\*
--- 1 ----
${PLUS} first revision
Index: file4
===================================================================
RCS file: file4
diff -N file4
\*\*\* file4	${RFCDATE}	[0-9.]*
--- /dev/null	${RFCDATE_EPOCH}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
- file4 first revision
--- 0 ----"

	  # Switch to the nonbranch tag.
	  dotest death2-19 "${testcvs} -q update -r tag" \
"[UP] file1
${SPROG} update: \`file2' is no longer in the repository
${SPROG} update: \`file3' is no longer in the repository
U file4"

	  dotest_fail death2-20 "test -f file2"

	  # Make sure diff only reports appropriate files.
	  dotest_fail death2-diff-13 "${testcvs} -q diff -r rdiff-tag" \
"${SPROG} diff: Tag rdiff-tag refers to a dead (removed) revision in file .file1.\.
${SPROG} diff: No comparison available\.  Pass .-N. to .${SPROG} diff.${QUESTION}"

	  dotest_fail death2-diff-14 "${testcvs} -q diff -r rdiff-tag -c -N" \
"Index: file1
===================================================================
RCS file: file1
diff -N file1
\*\*\* /dev/null	${RFCDATE_EPOCH}
--- file1	${RFCDATE}	[0-9.]*
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 0 \*\*\*\*
--- 1 ----
${PLUS} first revision"

	  # now back to the trunk
	  dotest death2-21 "${testcvs} -q update -A" \
"U file2
[UP] file4"

	  # test merging with a dead file
	  dotest death2-22 "${testcvs} -q co first-dir" \
"U first-dir/file1
U first-dir/file2
U first-dir/file4"

	  cd first-dir
	  dotest death2-23 "${testcvs} rm -f file4" \
"${SPROG} remove: scheduling .file4. for removal
${SPROG} remove: use .${SPROG} commit. to remove this file permanently"
	  dotest death2-24 "${testcvs} -q ci -m removed file4" \
"$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
new revision: delete; previous revision: 1\.2"
	  cd ..
	  echo "new stuff" >file4
	  dotest_fail death2-25 "${testcvs} up file4" \
"${SPROG} update: conflict: \`file4' is modified but no longer in the repository
C file4"

	  dokeep
	  cd ..
	  rm -r first-dir
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	rm-update-message)
	  # FIXME
	  # local CVS prints a warning message when update notices a missing
	  # file and client/server CVS doesn't.  These should be identical.
	  mkdir rm-update-message; cd rm-update-message
	  modify_repo mkdir $CVSROOT_DIRNAME/rm-update-message
	  dotest rm-update-message-setup-1 "$testcvs -q co rm-update-message" ''
	  cd rm-update-message
	  file=x
	  echo >$file
	  dotest rm-update-message-setup-2 "$testcvs -q add $file" \
"${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest rm-update-message-setup-3 "$testcvs -q ci -mcreate $file" \
"$CVSROOT_DIRNAME/rm-update-message/$file,v  <--  $file
initial revision: 1\.1"

	  rm $file
	  dotest rm-update-message-1 "$testcvs up $file" \
"${SPROG} update: warning: \`$file' was lost
U $file"

	  dokeep
	  cd ../..
	  rm -r rm-update-message
	  modify_repo rm -rf $CVSROOT_DIRNAME/rm-update-message
	  ;;



	rmadd)
	  # More tests of adding and removing files.
	  # In particular ci -r.
	  # Other ci -r tests:
	  #   * editor-9: checking in a modified file,
	  #     where "ci -r" means a branch.
	  #   * basica-8a1: checking in a modified file with numeric revision.
	  #   * basica-8a2: likewise.
	  #   * keywordlog-4: adding a new file with numeric revision.
	  mkdir 1; cd 1
	  dotest rmadd-1 "$testcvs -q co -l ."
	  mkdir first-dir
	  dotest rmadd-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  echo first file1 >file1
	  dotest rmadd-3 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"

	  dotest_fail rmadd-4 "${testcvs} -q ci -r 1.2.2.4 -m add" \
"${SPROG} commit: cannot add file .file1' with revision .1\.2\.2\.4'; must be on trunk
${SPROG} \[commit aborted\]: correct above errors first!"
	  dotest_fail rmadd-5 "${testcvs} -q ci -r 1.2.2 -m add" \
"${SPROG} commit: cannot add file .file1' with revision .1\.2\.2'; must be on trunk
${SPROG} \[commit aborted\]: correct above errors first!"
	  dotest_fail rmadd-6 "$testcvs -q ci -r mybranch -m add" \
"$SPROG \[commit aborted\]: no such tag \`mybranch'"

	  # The thing with the trailing periods strikes me as a very
	  # bizarre behavior, but it would seem to be intentional
	  # (see commit.c).  It probably could go away....
	  dotest rmadd-7 "${testcvs} -q ci -r 7.... -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 7\.1"
	  if $remote; then
	    # I guess remote doesn't set a sticky tag in this case.
	    # Kind of odd, in the sense that rmadd-24a does set one
	    # both local and remote.
	    dotest_fail rmadd-7a "test -f CVS/Tag"
	    echo T7 >CVS/Tag
	  else
	    dotest rmadd-7a "cat CVS/Tag" "T7"
	  fi

	  dotest rmadd-8 "${testcvs} -q tag -b mybranch" "T file1"
	  dotest rmadd-9 "${testcvs} -q tag mynonbranch" "T file1"

	  touch file2
	  # The previous "cvs ci -r" set a sticky tag of '7'.  Seems a
	  # bit odd, and I guess commit.c (findmaxrev) makes '7' sticky
	  # tags unnecessary (?).  I kind of suspect that it should be
	  # saying "sticky tag is not a branch" like keywordlog-4b.
	  # Or something.
	  dotest rmadd-10 "${testcvs} add file2" \
"${SPROG} add: scheduling file .file2. for addition on branch .7'
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  # As in the previous example, CVS is confused....
	  dotest rmadd-11 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 7\.1"

	  dotest rmadd-12 "${testcvs} -q update -A" ""
	  touch file3
	  dotest rmadd-13 "${testcvs} add file3" \
"${SPROG} add: scheduling file .file3. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  # Huh?  file2 is not up to date?  Seems buggy to me....
	  dotest_fail rmadd-14 "${testcvs} -q ci -r mybranch -m add" \
"${SPROG} commit: Up-to-date check failed for .file2'
${SPROG} \[commit aborted\]: correct above errors first!"
	  # Whatever, let's not let file2 distract us....
	  dotest rmadd-15 "${testcvs} -q ci -r mybranch -m add file3" \
"$CVSROOT_DIRNAME/first-dir/Attic/file3,v  <--  file3
new revision: 1\.1\.2\.1; previous revision: 1\.1"

	  touch file4
	  dotest rmadd-16 "${testcvs} add file4" \
"${SPROG} add: scheduling file .file4. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  # Prior to CVS 1.12.10, this would fail with a, "no such tag" message
	  # since val-tags used to be updated the first time the tag was used
	  # rather than when it was created.

	  # Try to make CVS write val-tags.
	  if $proxy; then :; else
	    # First remove the tag.
	    grep -v mynonbranch $CVSROOT_DIRNAME/CVSROOT/val-tags \
	         >$CVSROOT_DIRNAME/CVSROOT/val-tags-tmp
	    mv $CVSROOT_DIRNAME/CVSROOT/val-tags-tmp \
	       $CVSROOT_DIRNAME/CVSROOT/val-tags

	    dotest rmadd-18 "$testcvs -q update -p -r mynonbranch file1" \
"first file1"
	    # Oops, -p suppresses writing val-tags (probably a questionable
	    # behavior).
	    dotest_fail rmadd-19 \
"$testcvs -q ci -r mynonbranch -m add file4" \
"$SPROG \[commit aborted\]: no such tag \`mynonbranch'"
	    # Now make CVS write val-tags for real.
	    dotest rmadd-20 "$testcvs -q update -r mynonbranch file1"
	  fi # !$proxy

	  # Oops - CVS isn't distinguishing between a branch tag and
	  # a non-branch tag.
	  dotest rmadd-21 \
"${testcvs} -q ci -r mynonbranch -m add file4" \
"$CVSROOT_DIRNAME/first-dir/Attic/file4,v  <--  file4
new revision: 1\.1\.2\.1; previous revision: 1\.1"

	  # OK, we add this one in a vanilla way, but then check in
	  # a modification with ci -r and sniff around for sticky tags.
	  echo file5 >file5
	  dotest rmadd-22 "${testcvs} add file5" \
"${SPROG} add: scheduling file .file5. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  if $remote; then
	    # Interesting bug (or missing feature) here.  findmaxrev
	    # gets the major revision from the Entries.  Well, remote
	    # doesn't send the entries for files which are not involved.
	    dotest rmadd-23r "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file5,v  <--  file5
initial revision: 1\.1"
	    dotest rmadd-23-workaroundr \
"${testcvs} -q ci -r 7 -m bump-it file5" \
"$CVSROOT_DIRNAME/first-dir/file5,v  <--  file5
new revision: 7\.1; previous revision: 1\.1"
	  else
	    dotest rmadd-23 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file5,v  <--  file5
initial revision: 7\.1"
	  fi
	  echo change it >file5
	  dotest_fail rmadd-24 "$testcvs -q ci -r 4.8 -m change file5" \
"$CVSROOT_DIRNAME/first-dir/file5,v  <--  file5
$SPROG commit: $CVSROOT_DIRNAME/first-dir/file5,v: revision 4\.8 too low; must be higher than 7\.1
$SPROG commit: could not check in file5"
	  dotest rmadd-24a "${testcvs} -q ci -r 8.4 -m change file5" \
"$CVSROOT_DIRNAME/first-dir/file5,v  <--  file5
new revision: 8\.4; previous revision: 7\.1"
	  # I'm not really sure that a sticky tag make sense here.
	  # It seems to be longstanding behavior for what that is worth.
	  dotest rmadd-25 "${testcvs} status file5" \
"===================================================================
File: file5            	Status: Up-to-date

   Working revision:	8\.4.*
   Repository revision:	8\.4	${CVSROOT_DIRNAME}/first-dir/file5,v
   Commit Identifier:	${commitid}
   Sticky Tag:		8\.4
   Sticky Date:		(none)
   Sticky Options:	(none)"

	  # now try forced revision with recursion
	  mkdir sub
	  dotest rmadd-26 "${testcvs} -q add sub" \
"Directory ${CVSROOT_DIRNAME}/first-dir/sub added to the repository"
	  echo hello >sub/subfile
	  dotest rmadd-27 "${testcvs} -q add sub/subfile" \
"${SPROG} add: use .${SPROG} commit. to add this file permanently"

	  dotest rmadd-28 "${testcvs} -q ci -m. sub" \
"$CVSROOT_DIRNAME/first-dir/sub/subfile,v  <--  sub/subfile
initial revision: 1\.1"

	  # lose the branch
	  dotest rmadd-29 "${testcvs} -q up -A" \
"${SPROG} update: \`file3' is no longer in the repository
${SPROG} update: \`file4' is no longer in the repository"

	  # -f disables recursion
	  dotest rmadd-30 "${testcvs} -q ci -f -r9 -m." \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 9\.1; previous revision: 7\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 9\.1; previous revision: 7\.1
$CVSROOT_DIRNAME/first-dir/file5,v  <--  file5
new revision: 9\.1; previous revision: 8\.4"

	  # add -R to force recursion
	  dotest rmadd-31 "${testcvs} -q ci -f -r9 -R -m." \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 9\.2; previous revision: 9\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 9\.2; previous revision: 9\.1
$CVSROOT_DIRNAME/first-dir/file5,v  <--  file5
new revision: 9\.2; previous revision: 9\.1
$CVSROOT_DIRNAME/first-dir/sub/subfile,v  <--  sub/subfile
new revision: 9\.1; previous revision: 1\.1"

	  if $remote; then
	    # as noted above, remote doesn't set a sticky tag
	    :
	  else
	    dotest rmadd-32 "cat CVS/Tag" "T9"
	    dotest rmadd-33 "cat sub/CVS/Tag" "T9"
	  fi

	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	rmadd2)
	  # Tests of undoing commits, including in the presence of
	  # adding and removing files.  See join for a list of -j tests.
	  mkdir 1; cd 1
	  dotest rmadd2-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest rmadd2-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  echo 'initial contents' >file1
	  dotest rmadd2-3 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest rmadd2-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  dotest rmadd2-4a "${testcvs} -Q tag tagone" ""
	  dotest rmadd2-5 "${testcvs} rm -f file1" \
"${SPROG} remove: scheduling .file1. for removal
${SPROG} remove: use .${SPROG} commit. to remove this file permanently"
	  dotest rmadd2-6 "${testcvs} -q ci -m remove" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: delete; previous revision: 1\.1"
	  dotest rmadd2-7 "$testcvs -q update -j 1.2 -j 1.1 file1" "U file1"
	  dotest rmadd2-8 "${testcvs} -q ci -m readd" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.3; previous revision: 1\.2"
	  echo 'new contents' >file1
	  dotest rmadd2-9 "${testcvs} -q ci -m modify" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.4; previous revision: 1\.3"
	  dotest rmadd2-10 "${testcvs} -q update -j 1.4 -j 1.3 file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.4
retrieving revision 1\.3
Merging differences between 1\.4 and 1\.3 into file1"
	  dotest rmadd2-11 "${testcvs} -q ci -m undo" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.5; previous revision: 1\.4"
	  dotest rmadd2-12 "cat file1" "initial contents"
	  dotest rmadd2-13 "${testcvs} -q update -p -r 1.3" "initial contents"

	  # Hmm, might be a bit odd that this works even if 1.3 is not
	  # the head.
	  dotest rmadd2-14 "${testcvs} -q update -j 1.3 -j 1.2 file1" \
"${SPROG} update: scheduling \`file1' for removal"

	  # Check that -p can get arbitrary revisions of a removed file
	  dotest rmadd2-14a "${testcvs} -q update -p" "initial contents"
	  dotest rmadd2-14b "${testcvs} -q update -p -r 1.5" "initial contents"
	  dotest rmadd2-14c "${testcvs} -q update -p -r 1.3" "initial contents"

	  dotest rmadd2-15 "${testcvs} -q ci -m re-remove" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: delete; previous revision: 1\.5"
	  dotest rmadd2-16 "${testcvs} log -h file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/Attic/file1,v
Working file: file1
head: 1\.6
branch:
locks: strict
access list:
symbolic names:
	tagone: 1\.1
keyword substitution: kv
total revisions: 6
============================================================================="
	  dotest rmadd2-17 "${testcvs} status -v file1" \
"===================================================================
File: no file file1		Status: Up-to-date

   Working revision:	No entry for file1
   Repository revision:	1\.6	${CVSROOT_DIRNAME}/first-dir/Attic/file1,v
   Commit Identifier:	${commitid}

   Existing Tags:
	tagone                   	(revision: 1.1)"

	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	rmadd3)
          # This test demonstrates that CVS notices that file1 exists rather
	  # that deleting or writing over it after:
	  #
	  #   cvs remove -f file1; touch file1; cvs add file1.
	  #
          # According to the manual, this should work for:
	  #
	  #   rm file1; cvs remove file1; cvs add file1
	  #
	  # but in past version of CVS, new content in file1 would be
	  # erroneously deleted when file1 reappeared between the remove and
	  # the add.
	  #
	  # Later versions of CVS would refuse to perform the add, but still
	  # allow a subsequent local commit to erase the file from the
	  # workspace, possibly losing data.
	  mkdir 1; cd 1
	  dotest rmadd3-init1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest rmadd3-init2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir

	  echo initial content for file1 >file1
	  dotest rmadd3-init3 "${testcvs} add file1" \
"${SPROG} add: scheduling file \`file1' for addition
${SPROG} add: use \`${SPROG} commit' to add this file permanently"
	  dotest rmadd3-init4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"

	  # Here begins the guts of this test, as detailed above.
	  dotest rmadd3-1 "${testcvs} rm -f file1" \
"${SPROG} remove: scheduling \`file1' for removal
${SPROG} remove: use \`${SPROG} commit' to remove this file permanently"

          # Now recreate the file:
	  echo desired future contents for file1 >file1

	  # And attempt to resurrect it at the same time:
	  dotest_fail rmadd3-2 "${testcvs} add file1" \
"${SPROG} add: \`file1' should be removed and is still there (or is back again)"

	  # Now prove that commit knows that it shouldn't erase files.
	  dotest_fail rmadd3-3 "${testcvs} -q ci -m." \
"$CPROG commit: \`file1' should be removed and is still there (or is back again)
$CPROG \[commit aborted\]: correct above errors first!"

	  # Then these should pass too:
	  dotest rmadd3-4 "test -f file1"
	  dotest rmadd3-5 "cat file1" "desired future contents for file1"

	  if $keep; then
	    echo Keeping ${TESTDIR} and exiting due to --keep
	    exit 0
	  fi

	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	resurrection)
	  # This test tests a few file resurrection scenarios.
	  mkdir 1; cd 1
	  dotest resurrection-init1 "$testcvs -q co -l ." ''
	  mkdir first-dir
	  dotest resurrection-init2 "$testcvs add first-dir" \
"Directory $CVSROOT_DIRNAME/first-dir added to the repository"
	  cd first-dir

	  echo initial content for file1 >file1
	  dotest resurrection-init3 "$testcvs add file1" \
"$SPROG add: scheduling file \`file1' for addition
$SPROG add: use \`$SPROG commit' to add this file permanently"
	  dotest resurrection-init4 "$testcvs -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"

	  dotest resurrection-init5 "$testcvs -Q rm -f file1"

	  # The first test is that `cvs add' will resurrect a file before its
	  # removal has been committed.
	  dotest_sort resurrection-1 "$testcvs add file1" \
"U file1
$SPROG add: \`file1', version 1\.1, resurrected"
	  dotest resurrection-2 "$testcvs -Q diff file1" ""

	  dotest resurrection-init6 "$testcvs -Q tag -b resurrection"
	  dotest resurrection-init7 "$testcvs -Q rm -f file1"
	  dotest resurrection-init8 "$testcvs -Q ci -mrm"

	  # The next test is that CVS will resurrect a committed removal.
	  dotest_sort resurrection-3 "$testcvs add file1" \
"U file1
$SPROG add: Re-adding file \`file1' after dead revision 1\.2\.
$SPROG add: Resurrecting file \`file1' from revision 1\.1\.
$SPROG add: use \`$SPROG commit' to add this file permanently"
	  dotest resurrection-4 "$testcvs -q diff -r1.1 file1" ""
	  dotest resurrection-5 "$testcvs -q ci -mreadd" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.3; previous revision: 1\.2"

	  dotest resurrection-init9 "$testcvs -Q up -rresurrection"
	  dotest resurrection-init10 "$testcvs -Q rm -f file1"
	  dotest resurrection-init11 "$testcvs -Q ci -mrm-on-resurrection"

	  # The next test is that CVS will resurrect a committed removal to a
	  # branch.
	  dotest_sort resurrection-6 "$testcvs -r add file1" \
"U file1
$SPROG add: Re-adding file \`file1' on branch \`resurrection' after dead revision 1\.1\.2\.1\.
$SPROG add: Resurrecting file \`file1' from revision 1\.1\.
$SPROG add: use \`$SPROG commit' to add this file permanently"
	  # If the file is modified, it had better be read-write
	  # regardless of what the user has requested with the CVSREAD
	  # environment variable or the global -r switch
          dotest resurrection-6b 'test -w file1' ''
	  dotest resurrection-7 "$testcvs -Q diff -r1.1 file1" ""
	  dotest resurrection-8 "$testcvs -q ci -mreadd" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.2; previous revision: 1\.1\.2\.1"

	  # The next few tests verify that an attempted resurrection of a file
	  # with no previous revision on the trunk fails.
	  touch file2
	  dotest resurrection-9 "$testcvs -Q add file2"
	  dotest resurrection-10 "$testcvs -Q ci -mnew-file2"
	  dotest resurrection-11 "$testcvs -Q up -A"

	  # This command once caused an assertion failure.
	  dotest resurrection-12 "$testcvs add file2" \
"$SPROG add: File \`file2' has no previous revision to resurrect\."

	  # Check what 'cvs -r add' does with resurrected files.
	  dotest resurrection-13 "$testcvs -Q rm -f file1"
	  dotest_sort resurrection-14 "$testcvs -r add file1" \
"U file1
$SPROG add: \`file1', version 1\.3, resurrected"
	  dotest_fail resurrection-15 'test -w file1' ''

	  dokeep
	  cd ../..
	  rm -rf 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	dirs)
	  # Tests related to removing and adding directories.
	  # See also:
	  #   conflicts (especially dir1 in conflicts-130): What happens if
	  #     directory exists in repository and a non-CVS-controlled
	  #     directory in the working directory?
	  #   conflicts3-15.  More cases, especially where CVS directory
	  #     exists but without CVS/Repository and friends.
	  #   conflicts3-22.  Similar to conflicts-130 but there is a file
	  #     in the directory.
	  #   dirs2.  Sort of similar to conflicts3-22 but somewhat different.
	  mkdir imp-dir; cd imp-dir
	  echo file1 >file1
	  mkdir sdir
	  echo sfile >sdir/sfile
	  dotest_sort dirs-1 \
"${testcvs} import -m import-it dir1 vend rel" "

N dir1/file1
N dir1/sdir/sfile
No conflicts created by this import
${SPROG} import: Importing ${CVSROOT_DIRNAME}/dir1/sdir"
	  cd ..

	  mkdir 1; cd 1
	  dotest dirs-2 "$testcvs -Q co dir1" ""

	  # Various CVS administrators are in the habit of removing
	  # the repository directory for things they don't want any
	  # more.  I've even been known to do it myself (on rare
	  # occasions).  Not the usual recommended practice, but we want
	  # to try to come up with some kind of reasonable/documented/sensible
	  # behavior.
	  modify_repo rm -rf $CVSROOT_DIRNAME/dir1/sdir

	  dotest dirs-3 "${testcvs} update" \
"${SPROG} update: Updating dir1
${SPROG} update: Updating dir1/sdir
${SPROG} update: cannot open directory ${CVSROOT_DIRNAME}/dir1/sdir: No such file or directory
${SPROG} update: skipping directory dir1/sdir"
	  dotest dirs-3a "${testcvs} update -d" \
"${SPROG} update: Updating dir1
${SPROG} update: Updating dir1/sdir
${SPROG} update: cannot open directory ${CVSROOT_DIRNAME}/dir1/sdir: No such file or directory
${SPROG} update: skipping directory dir1/sdir"

	  # If we say "yes", then CVS gives errors about not being able to
	  # create lock files.
	  # The fact that it says "skipping directory " rather than
	  # "skipping directory dir1/sdir" is some kind of bug.
	  dotest dirs-4 "echo no | ${testcvs} release -d dir1/sdir" \
"${SPROG} update: cannot open directory ${CVSROOT_DIRNAME}/dir1/sdir: No such file or directory
${SPROG} update: skipping directory 
You have \[0\] altered files in this repository\.
Are you sure you want to release (and delete) directory .dir1/sdir': .. .release' aborted by user choice."

	  # OK, if "cvs release" won't help, we'll try it the other way...
	  rm -r dir1/sdir

	  dotest dirs-5 "cat dir1/CVS/Entries" \
"/file1/1.1.1.1/[a-zA-Z0-9 :]*//
D/sdir////"
	  dotest dirs-6 "${testcvs} update" "${SPROG} update: Updating dir1"
	  dotest dirs-7 "cat dir1/CVS/Entries" \
"/file1/1.1.1.1/[a-zA-Z0-9 :]*//
D/sdir////"
	  dotest dirs-8 "${testcvs} update -d dir1" \
"${SPROG} update: Updating dir1"

	  dokeep
	  cd ..
	  rm -r imp-dir 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/dir1
	  ;;



	dirs2)
	  # See "dirs" for a list of tests involving adding and
	  # removing directories.
	  mkdir 1; cd 1
	  dotest dirs2-1 "$testcvs -q co -l ."
	  mkdir first-dir
	  dotest dirs2-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  mkdir sdir
	  dotest dirs2-3 "${testcvs} add sdir" \
"Directory ${CVSROOT_DIRNAME}/first-dir/sdir added to the repository"
	  touch sdir/file1
	  dotest dirs2-4 "${testcvs} add sdir/file1" \
"${SPROG} add: scheduling file .sdir/file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest dirs2-5 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/sdir/file1,v  <--  sdir/file1
initial revision: 1\.1"
	  rm -r sdir/CVS
	  if $remote; then
	    # This is just like conflicts3-23
	    dotest_fail dirs2-6r "${testcvs} update -d" \
"${QUESTION} sdir
${SPROG} update: Updating \.
${SPROG} update: Updating sdir
${CPROG} update: move away \`sdir/file1'; it is in the way
C sdir/file1"
	    rm sdir/file1
	    rm -r sdir/CVS

	    # This is where things are not just like conflicts3-23
	    dotest dirs2-7r "${testcvs} update -d" \
"${QUESTION} sdir
${SPROG} update: Updating \.
${SPROG} update: Updating sdir
U sdir/file1"
	  else
	    dotest dirs2-6 "${testcvs} update -d" \
"${CPROG} update: Updating \.
${QUESTION} sdir"
	    rm sdir/file1
	    dotest dirs2-7 "${testcvs} update -d" \
"${CPROG} update: Updating \.
${QUESTION} sdir"
	  fi
	  cd ../..

	  # Now, the same thing (more or less) on a branch.
	  mkdir 2; cd 2
	  dotest dirs2-8 "${testcvs} -q co first-dir" 'U first-dir/sdir/file1'
	  cd first-dir
	  dotest dirs2-9 "${testcvs} -q tag -b br" "T sdir/file1"
	  rm -r sdir/CVS

	  if $remote; then
	    # val-tags used to have a cute little quirk; if an update didn't
	    # recurse into the directories where the tag is defined, val-tags
	    # wouldn't get updated.  This is no longer a problem as of 1.12.10.
	    dotest_fail dirs2-10-againr "$testcvs update -d -r br" \
"$QUESTION sdir
$SPROG update: Updating \.
$SPROG update: Updating sdir
$CPROG update: move away \`sdir/file1'; it is in the way
C sdir/file1"
	  else
	    dotest dirs2-10 "${testcvs} update -d -r br" \
"$SPROG update: Updating \.
$QUESTION sdir"
# This is what used to happen.  I'm not sure why it changed with 1.12.10, but
# as near as I can tell from the comments in update_direntproc, the new
# behavior was the intended behavior.
#"$CPROG update: in directory \`sdir':
#$CPROG \[update aborted\]: there is no version here; do \`$CPROG checkout' first"
	  fi
	  cd ../..

	  # OK, the above tests make the situation somewhat harder
	  # than it might be, in the sense that they actually have a
	  # file which is alive on the branch we are updating.  Let's
	  # try it where it is just a directory where all the files
	  # have been removed.
	  mkdir 3; cd 3
	  dotest dirs2-11 "${testcvs} -q co -r br first-dir" \
"U first-dir/sdir/file1"
	  cd first-dir
	  # Hmm, this doesn't mention the branch like add does.  That's
	  # an odd non-orthogonality.
	  dotest dirs2-12 "${testcvs} rm -f sdir/file1" \
"${SPROG} remove: scheduling .sdir/file1. for removal
${SPROG} remove: use .${SPROG} commit. to remove this file permanently"
	  dotest dirs2-13 "${testcvs} -q ci -m remove" \
"$CVSROOT_DIRNAME/first-dir/sdir/file1,v  <--  sdir/file1
new revision: delete; previous revision: 1\.1"
	  cd ../../2/first-dir
	  if $remote; then
	    dotest dirs2-14 "${testcvs} update -d -r br" \
"${QUESTION} sdir/file1
${SPROG} update: Updating \.
${SPROG} update: Updating sdir"
	  else
	    dotest dirs2-14 "${testcvs} update -d -r br" \
"${CPROG} update: Updating \.
${QUESTION} sdir"
	  fi

	  dokeep
	  cd ../..
	  rm -r 1 2 3
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	branches)
	  # More branch tests, including branches off of branches
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  dotest branches-1 "$testcvs -q co first-dir"
	  cd first-dir
	  echo 1:ancest >file1
	  echo 2:ancest >file2
	  echo 3:ancest >file3
	  echo 4:trunk-1 >file4
	  dotest branches-2 "${testcvs} add file1 file2 file3 file4" \
"$SPROG add: scheduling file \`file1' for addition
$SPROG add: scheduling file \`file2' for addition
$SPROG add: scheduling file \`file3' for addition
$SPROG add: scheduling file \`file4' for addition
$SPROG add: use .$SPROG commit. to add these files permanently"
	  dotest branches-2a "$testcvs -n -q ci -m dont-commit"
	  dotest_lit branches-3 "$testcvs -q ci -m add-it" <<HERE
$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1.1
${CVSROOT_DIRNAME}/first-dir/file3,v  <--  file3
initial revision: 1.1
${CVSROOT_DIRNAME}/first-dir/file4,v  <--  file4
initial revision: 1.1
HERE
	  echo 4:trunk-2 >file4
	  dotest branches-3.2 "${testcvs} -q ci -m trunk-before-branch" \
"$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
new revision: 1\.2; previous revision: 1\.1"
	  # The "cvs log file4" in test branches-14.3 will test that we
	  # didn't really add the tag.
	  dotest branches-3.3 "${testcvs} -qn tag dont-tag" \
"T file1
T file2
T file3
T file4"
	  # Modify this file before branching, to deal with the case where
	  # someone is hacking along, says "oops, I should be doing this on
	  # a branch", and only then creates the branch.
	  echo 1:br1 >file1
	  dotest branches-4 "${testcvs} tag -b br1" "${SPROG}"' tag: Tagging \.
T file1
T file2
T file3
T file4'
	  dotest branches-5 "${testcvs} update -r br1" \
"${SPROG} update: Updating \.
M file1"
	  echo 2:br1 >file2
	  echo 4:br1 >file4
	  dotest branches-6 "${testcvs} -q ci -m modify" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
new revision: 1\.2\.2\.1; previous revision: 1\.2"
	  dotest branches-7 "${testcvs} -q tag -b brbr" 'T file1
T file2
T file3
T file4'
	  dotest branches-8 "${testcvs} -q update -r brbr" ''
	  echo 1:brbr >file1
	  echo 4:brbr >file4
	  dotest branches-9 "${testcvs} -q ci -m modify" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.1\.2\.1; previous revision: 1\.1\.2\.1
$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
new revision: 1\.2\.2\.1\.2\.1; previous revision: 1\.2\.2\.1"
	  dotest branches-10 "cat file1 file2 file3 file4" '1:brbr
2:br1
3:ancest
4:brbr'
	  dotest branches-11 "${testcvs} -q update -r br1" \
'[UP] file1
[UP] file4'
	  dotest branches-12 "cat file1 file2 file3 file4" '1:br1
2:br1
3:ancest
4:br1'
	  echo 4:br1-2 >file4
	  dotest branches-12.2 "${testcvs} -q ci -m change-on-br1" \
"$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
new revision: 1\.2\.2\.2; previous revision: 1\.2\.2\.1"
	  dotest branches-13 "${testcvs} -q update -A" '[UP] file1
[UP] file2
[UP] file4'
	  dotest branches-14 "cat file1 file2 file3 file4" '1:ancest
2:ancest
3:ancest
4:trunk-2'
	  echo 4:trunk-3 >file4
	  dotest branches-14.2 \
	    "${testcvs} -q ci -m trunk-change-after-branch" \
"$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
new revision: 1\.3; previous revision: 1\.2"
	  dotest branches-14.3 "${testcvs} log file4" \
"
RCS file: ${CVSROOT_DIRNAME}/first-dir/file4,v
Working file: file4
head: 1\.3
branch:
locks: strict
access list:
symbolic names:
	brbr: 1\.2\.2\.1\.0\.2
	br1: 1\.2\.0\.2
keyword substitution: kv
total revisions: 6;	selected revisions: 6
description:
----------------------------
revision 1\.3
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -1;  commitid: ${commitid};
trunk-change-after-branch
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -1;  commitid: ${commitid};
branches:  1\.2\.2;
trunk-before-branch
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
add-it
----------------------------
revision 1\.2\.2\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -1;  commitid: ${commitid};
change-on-br1
----------------------------
revision 1\.2\.2\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -1;  commitid: ${commitid};
branches:  1\.2\.2\.1\.2;
modify
----------------------------
revision 1\.2\.2\.1\.2\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -1;  commitid: ${commitid};
modify
============================================================================="
	  dotest_fail branches-14.4 \
	    "${testcvs} diff -c -r 1.1 -r 1.3 file4" \
"Index: file4
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/file4,v
retrieving revision 1\.1
retrieving revision 1\.3
diff -c -r1\.1 -r1\.3
\*\*\* file4	${RFCDATE}	1\.1
--- file4	${RFCDATE}	1\.3
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
! 4:trunk-1
--- 1 ----
! 4:trunk-3"
	  dotest_fail branches-14.5 \
	    "${testcvs} diff -c -r 1.1 -r 1.2.2.1 file4" \
"Index: file4
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/file4,v
retrieving revision 1\.1
retrieving revision 1\.2\.2\.1
diff -c -r1\.1 -r1\.2\.2\.1
\*\*\* file4	${RFCDATE}	1\.1
--- file4	${RFCDATE}	1\.2\.2\.1
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1 \*\*\*\*
! 4:trunk-1
--- 1 ----
! 4:br1"
	  dotest branches-15 \
	    "${testcvs} update -j 1.1.2.1 -j 1.1.2.1.2.1 file1" \
	    "RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.1\.2\.1
retrieving revision 1\.1\.2\.1\.2\.1
Merging differences between 1\.1\.2\.1 and 1\.1\.2\.1\.2\.1 into file1
rcsmerge: warning: conflicts during merge"
	  dotest branches-16 "cat file1" '<<<<<<< file1
1:ancest
[=]======
1:brbr
[>]>>>>>> 1\.1\.2\.1\.2\.1'

	  dotest branches-o1 "${testcvs} -q admin -o ::brbr" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
done
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
done
RCS file: ${CVSROOT_DIRNAME}/first-dir/file3,v
done
RCS file: ${CVSROOT_DIRNAME}/first-dir/file4,v
done"

	  dokeep
	  cd ..
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  rm -r first-dir
	  ;;



	branches2)
	  # More branch tests.
	  # Test that when updating a new subdirectory in a directory
	  # which was checked out on a branch, the new subdirectory is
	  # created on the appropriate branch.  Test this when joining
	  # as well.

	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  mkdir trunk; cd trunk

	  # Create a file.
	  dotest branches2-1 "${testcvs} -q co first-dir"
	  cd first-dir
	  echo "file1 first revision" > file1
	  dotest branches2-2 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest branches2-3 "${testcvs} commit -m add file1" \
"${CVSROOT_DIRNAME}/first-dir/file1,v  <--  file1
initial revision: 1\.1"

	  # Tag the file.
	  dotest branches2-4 "${testcvs} -q tag tag1" 'T file1'

	  # Make two branches.
	  dotest branches2-5 "${testcvs} -q rtag -b -r tag1 b1 first-dir" ''
	  dotest branches2-6 "${testcvs} -q rtag -b -r tag1 b2 first-dir" ''

	  # Create some files and a subdirectory on branch b1.
	  cd ../..
	  mkdir b1; cd b1
	  dotest branches2-7 "${testcvs} -q co -r b1 first-dir" \
"U first-dir/file1"
	  cd first-dir
	  echo "file2 first revision" > file2
	  dotest branches2-8 "${testcvs} add file2" \
"${SPROG}"' add: scheduling file `file2'\'' for addition on branch `b1'\''
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  mkdir dir1
	  dotest branches2-9 "${testcvs} add dir1" \
"Directory ${CVSROOT_DIRNAME}/first-dir/dir1 added to the repository
--> Using per-directory sticky tag "'`'"b1'"
	  echo "file3 first revision" > dir1/file3
	  dotest branches2-10 "${testcvs} add dir1/file3" \
"${SPROG}"' add: scheduling file `dir1/file3'\'' for addition on branch `b1'\''
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  dotest branches2-11 "${testcvs} -q ci -madd ." \
"$CVSROOT_DIRNAME/first-dir/Attic/file2,v  <--  file2
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/dir1/Attic/file3,v  <--  dir1/file3
new revision: 1\.1\.2\.1; previous revision: 1\.1"

	  # Check out the second branch, and update the working
	  # directory to the first branch, to make sure the right
	  # happens with dir1.
	  cd ../..
	  mkdir b2; cd b2
	  dotest branches2-12 "${testcvs} -q co -r b2 first-dir" \
'U first-dir/file1'
	  cd first-dir
	  dotest branches2-13 "${testcvs} update -d -r b1 dir1" \
"${SPROG} update: Updating dir1
U dir1/file3"
	  dotest branches2-14 "${testcvs} -q status" \
"===================================================================
File: file1            	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		b2 (branch: 1\.1\.4)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file3            	Status: Up-to-date

   Working revision:	1\.1\.2\.1.*
   Repository revision:	1\.1\.2\.1	${CVSROOT_DIRNAME}/first-dir/dir1/Attic/file3,v
   Commit Identifier:	${commitid}
   Sticky Tag:		b1 (branch: 1\.1\.2)
   Sticky Date:		(none)
   Sticky Options:	(none)"

	  # Test some calls to rls here because we can.  These should probably
	  # be somewhere else, but we already have some directories set up.
          dotest branches2-14-rls-1 "$testcvs rls" \
"$SPROG rls: Listing module: \`.'
CVSROOT
first-dir"
          dotest branches2-14-rls-2 "$testcvs rls -R" \
"$SPROG rls: Listing module: \`.'
\.:
CVSROOT
first-dir

CVSROOT:
access
aclconfig
checkoutlist
commitinfo
config
cvswrappers
group
loginfo
modules
notify
postadmin
postproxy
posttag
postwatch
preproxy
rcsinfo
taginfo
verifymsg
Emptydir

CVSROOT/Emptydir:

first-dir:
file1
dir1

first-dir/dir1:"
          dotest branches2-14-rls-3 "$testcvs rls -l -R" \
"$SPROG rls: Listing module: \`.'
\.:
d--- $ISO8601DATE            CVSROOT
d--- $ISO8601DATE            first-dir

CVSROOT:
---- $ISO8601DATE 1\.[0-9][0-9]*        access
---- $ISO8601DATE 1\.[0-9][0-9]*        aclconfig
---- $ISO8601DATE 1\.[0-9][0-9]*        checkoutlist
---- $ISO8601DATE 1\.[0-9][0-9]*        commitinfo
---- $ISO8601DATE 1\.[0-9][0-9]*        config
---- $ISO8601DATE 1\.[0-9][0-9]*        cvswrappers
---- $ISO8601DATE 1\.[0-9][0-9]*        group
---- $ISO8601DATE 1\.[0-9][0-9]*        loginfo
---- $ISO8601DATE 1\.[0-9][0-9]*        modules
---- $ISO8601DATE 1\.[0-9][0-9]*        notify
---- $ISO8601DATE 1\.[0-9][0-9]*        postadmin
---- $ISO8601DATE 1\.[0-9][0-9]*        postproxy
---- $ISO8601DATE 1\.[0-9][0-9]*        posttag
---- $ISO8601DATE 1\.[0-9][0-9]*        postwatch
---- $ISO8601DATE 1\.[0-9][0-9]*        preproxy
---- $ISO8601DATE 1\.[0-9][0-9]*        rcsinfo
---- $ISO8601DATE 1\.[0-9][0-9]*        taginfo
---- $ISO8601DATE 1\.[0-9][0-9]*        verifymsg
d--- $ISO8601DATE            Emptydir

CVSROOT/Emptydir:

first-dir:
---- $ISO8601DATE 1\.1        file1
d--- $ISO8601DATE            dir1

first-dir/dir1:"
          dotest branches2-14-rls-4 "$testcvs rls -eR" \
"$SPROG rls: Listing module: \`.'
\.:
D/CVSROOT////
D/first-dir////

CVSROOT:
/access/1\.[0-9][0-9]*/$DATE//
/aclconfig/1\.[0-9][0-9]*/$DATE//
/checkoutlist/1\.[0-9][0-9]*/$DATE//
/commitinfo/1\.[0-9][0-9]*/$DATE//
/config/1\.[0-9][0-9]*/$DATE//
/cvswrappers/1\.[0-9][0-9]*/$DATE//
/group/1\.[0-9][0-9]*/$DATE//
/loginfo/1\.[0-9][0-9]*/$DATE//
/modules/1\.[0-9][0-9]*/$DATE//
/notify/1\.[0-9][0-9]*/$DATE//
/postadmin/1\.[0-9][0-9]*/$DATE//
/postproxy/1\.[0-9][0-9]*/$DATE//
/posttag/1\.[0-9][0-9]*/$DATE//
/postwatch/1\.[0-9][0-9]*/$DATE//
/preproxy/1\.[0-9][0-9]*/$DATE//
/rcsinfo/1\.[0-9][0-9]*/$DATE//
/taginfo/1\.[0-9][0-9]*/$DATE//
/verifymsg/1\.[0-9][0-9]*/$DATE//
D/Emptydir////

CVSROOT/Emptydir:

first-dir:
/file1/1\.1/$DATE//
D/dir1////

first-dir/dir1:"
          dotest branches2-14-rls-5 "$testcvs -q rls -R" \
"\.:
CVSROOT
first-dir

CVSROOT:
access
aclconfig
checkoutlist
commitinfo
config
cvswrappers
group
loginfo
modules
notify
postadmin
postproxy
posttag
postwatch
preproxy
rcsinfo
taginfo
verifymsg
Emptydir

CVSROOT/Emptydir:

first-dir:
file1
dir1

first-dir/dir1:"
          dotest branches2-14-rls-6 "$testcvs -q rls -lRrb1" \
"\.:
d--- $ISO8601DATE            CVSROOT
d--- $ISO8601DATE            first-dir

CVSROOT:
d--- $ISO8601DATE            Emptydir

CVSROOT/Emptydir:

first-dir:
---- $ISO8601DATE 1\.1        file1
---- $ISO8601DATE 1\.1\.2\.1    file2
d--- $ISO8601DATE            dir1

first-dir/dir1:
---- $ISO8601DATE 1\.1\.2\.1    file3"
          dotest branches2-14-rls-7 "$testcvs -q rls -lRrb2" \
"\.:
d--- $ISO8601DATE            CVSROOT
d--- $ISO8601DATE            first-dir

CVSROOT:
d--- $ISO8601DATE            Emptydir

CVSROOT/Emptydir:

first-dir:
---- $ISO8601DATE 1\.1        file1
d--- $ISO8601DATE            dir1

first-dir/dir1:"

	  # Now some calls to ls.  These are more appropriate here.
	  dotest branches2-14-ls-1 "$testcvs ls" \
"file1
dir1"
	  dotest branches2-14-ls-2 "$testcvs ls -e" \
"/file1/1\.1/$DATE//
D/dir1////"
	  dotest branches2-14-ls-3 "$testcvs ls -R" \
"\.:
file1
dir1

dir1:
file3"
	  dotest branches2-14-ls-4 "$testcvs ls -eRrHEAD" \
"\.:
/file1/1\.1/$DATE//THEAD
D/dir1////

dir1:"
	  dotest branches2-14-ls-5 "$testcvs ls -eRrb1" \
"\.:
/file1/1\.1/$DATE//Tb1
/file2/1\.1\.2\.1/$DATE//Tb1
D/dir1////

dir1:
/file3/1\.1\.2\.1/$DATE//Tb1"
	  dotest branches2-14-ls-6 "$testcvs ls -eRrb2" \
"\.:
/file1/1.1/$DATE//Tb2
D/dir1////

dir1:"
	  # Nonexistant tags used to cause assertion failures.
	  dotest_fail branches2-14-ls-7 "$testcvs ls -eRrnosuchtag" \
"$SPROG \[ls aborted\]: no such tag \`nosuchtag'"

	  # FIXME: Just clobbering the directory like this is a bit
	  # tacky, although people generally expect it to work.  Maybe
	  # we should release it instead.  We do it a few other places
	  # below as well.
	  rm -r dir1
	  dotest branches2-15 "${testcvs} update -d -j b1 dir1" \
"${SPROG} update: Updating dir1
U dir1/file3"
	  # FIXCVS: The `No revision control file' stuff seems to be
	  # CVS's way of telling us that we're adding the file on a
	  # branch, and the file is not on that branch yet.  This
	  # should be nicer.
	  dotest branches2-16 "${testcvs} -q status" \
"===================================================================
File: file1            	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		b2 (branch: 1\.1\.4)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file3            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		b2 - MISSING from RCS file!
   Sticky Date:		(none)
   Sticky Options:	(none)"

	  cd ../../trunk/first-dir
	  dotest branches2-17 "${testcvs} update -d -P dir1" \
"${SPROG} update: Updating dir1"
	  dotest_fail branches2-18 "test -d dir1"
	  dotest branches2-19 "${testcvs} update -d -P -r b1 dir1" \
"${SPROG} update: Updating dir1
U dir1/file3"
	  dotest branches2-20 "${testcvs} -q status" \
"===================================================================
File: file1            	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file3            	Status: Up-to-date

   Working revision:	1\.1\.2\.1.*
   Repository revision:	1\.1\.2\.1	${CVSROOT_DIRNAME}/first-dir/dir1/Attic/file3,v
   Commit Identifier:	${commitid}
   Sticky Tag:		b1 (branch: 1\.1\.2)
   Sticky Date:		(none)
   Sticky Options:	(none)"

	  rm -r dir1
	  dotest branches2-21 "${testcvs} update -d -P -j b1 dir1" \
"${SPROG} update: Updating dir1
U dir1/file3"
	  dotest branches2-22 "${testcvs} -q status" \
"===================================================================
File: file1            	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file3            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/dir1/Attic/file3,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"

	  cd ../..
	  rm -r b1 b2

	  # Check out branch b1 twice.  Crate a new directory in one
	  # working directory, then do a cvs update in the other
	  # working directory and see if the tags are right.
	  mkdir b1a
	  mkdir b1b
	  cd b1b
	  dotest branches2-23 "${testcvs} -q co -r b1 first-dir" \
'U first-dir/file1
U first-dir/file2
U first-dir/dir1/file3'
	  cd ../b1a
	  dotest branches2-24 "${testcvs} -q co -r b1 first-dir" \
'U first-dir/file1
U first-dir/file2
U first-dir/dir1/file3'
	  cd first-dir
	  mkdir dir2
	  dotest branches2-25 "${testcvs} add dir2" \
"Directory ${CVSROOT_DIRNAME}/first-dir/dir2 added to the repository
--> Using per-directory sticky tag "'`'"b1'"
	  echo "file4 first revision" > dir2/file4
	  dotest branches2-26 "${testcvs} add dir2/file4" \
"${SPROG}"' add: scheduling file `dir2/file4'\'' for addition on branch `b1'\''
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  dotest branches2-27 "${testcvs} -q commit -madd" \
"$CVSROOT_DIRNAME/first-dir/dir2/Attic/file4,v  <--  dir2/file4
new revision: 1\.1\.2\.1; previous revision: 1\.1"

	  cd ../../b1b/first-dir
	  dotest branches2-28 "${testcvs} update -d dir2" \
"${SPROG} update: Updating dir2
U dir2/file4"
	  cd dir2
	  dotest branches2-29 "${testcvs} -q status" \
"===================================================================
File: file4            	Status: Up-to-date

   Working revision:	1\.1\.2\.1.*
   Repository revision:	1\.1\.2\.1	${CVSROOT_DIRNAME}/first-dir/dir2/Attic/file4,v
   Commit Identifier:	${commitid}
   Sticky Tag:		b1 (branch: 1\.1\.2)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest branches2-30 "cat CVS/Tag" 'Tb1'

	  # Test update -A on a subdirectory
	  cd ..
	  rm -r dir2
	  dotest branches2-31 "${testcvs} update -A -d dir2" \
"${SPROG} update: Updating dir2"
	  cd dir2
	  dotest branches2-32 "${testcvs} -q status" ''
	  dotest_fail branches2-33 "test -f CVS/Tag"

	  # Add a file on the trunk.
	  echo "file5 first revision" > file5
	  dotest branches2-34 "${testcvs} add file5" \
"${SPROG}"' add: scheduling file `file5'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  dotest branches2-35 "${testcvs} -q commit -madd" \
"$CVSROOT_DIRNAME/first-dir/dir2/file5,v  <--  file5
initial revision: 1\.1"

	  cd ../../../trunk/first-dir
	  dotest branches2-36 "${testcvs} -q update -d dir2" 'U dir2/file5'
	  cd dir2
	  dotest branches2-37 "${testcvs} -q status" \
"===================================================================
File: file5            	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/dir2/file5,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest_fail branches2-38 "test -f CVS/status"

          dotest branches2-39 "$testcvs rls -rb1 -l -R first-dir" \
"$SPROG rls: Listing module: \`first-dir'
first-dir:
---- $ISO8601DATE 1\.1        file1
---- $ISO8601DATE 1\.1\.2\.1    file2
d--- $ISO8601DATE            dir1
d--- $ISO8601DATE            dir2

first-dir/dir1:
---- $ISO8601DATE 1\.1\.2\.1    file3

first-dir/dir2:
---- $ISO8601DATE 1\.1\.2\.1    file4"

	  dokeep
	  cd ../../..
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  rm -r trunk b1a b1b
	  ;;



	branches3)
	  # test local branch number support

	  # This test is skipped in $remotehost mode since the
	  # CVS_LOCAL_BRANCH_NUM is not inherited by the server process as it
	  # is with :fork:, for hopefully obvious reasons.
	  #
	  # FIXCVS?  Is this correct?  Should CVS_LOCAL_BRANCH_NUM be sent as
	  # a protocol extension or is it reasonable to only want this set on
	  # the server?

	  if test -n "$remotehost"; then :;else
	    modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	    mkdir branches3; cd branches3

	    dotest branches3-1 "$testcvs -q co first-dir"
	    cd first-dir
	    echo "file1 first revision" > file1
	    dotest branches3-2 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	    dotest branches3-3 "${testcvs} commit -m add file1" \
"${CVSROOT_DIRNAME}/first-dir/file1,v  <--  file1
initial revision: 1\.1"

	    # Tag the file using a CVS_LOCAL_BRANCH_NUM of 1000
	    CVS_LOCAL_BRANCH_NUM=1000; export CVS_LOCAL_BRANCH_NUM
	    dotest branches3-4 "${testcvs} -q tag -b tag1" 'T file1'
	    unset CVS_LOCAL_BRANCH_NUM
	    dotest branches3-5 "${testcvs} -q log file1" \
"
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
	tag1: 1\.1\.0\.1000
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
add
============================================================================="

	    dokeep
	    cd ../..
	    modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	    rm -r branches3
	  fi # !$remotehost
	  ;;



	branches4)
	  # test where a tag is a branch tag in some files and a revision
	  # tag in others

	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  mkdir branches4; cd branches4

	  dotest branches4-1 "$testcvs -q co first-dir"
	  cd first-dir
	  mkdir branches mixed mixed2 versions
	  dotest branches4-2 "${testcvs} -q add branches mixed mixed2 versions" \
"Directory ${CVSROOT_DIRNAME}/first-dir/branches added to the repository
Directory ${CVSROOT_DIRNAME}/first-dir/mixed added to the repository
Directory ${CVSROOT_DIRNAME}/first-dir/mixed2 added to the repository
Directory ${CVSROOT_DIRNAME}/first-dir/versions added to the repository"

	  echo file1 >branches/file1
	  echo file2 >branches/file2
	  echo file3 >branches/file3
	  echo file4 >branches/file4
	  cp branches/file* mixed
	  cp branches/file* mixed2
	  cp branches/file* versions

	  dotest branches4-3 "${testcvs} -q add */file*" \
"${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  dotest branches4-3a "${testcvs} -Q ci -m."

	  dotest branches4-4 "${testcvs} -q tag xxx versions/file* mixed*/file1 mixed*/file3" \
"T versions/file1
T versions/file2
T versions/file3
T versions/file4
T mixed/file1
T mixed/file3
T mixed2/file1
T mixed2/file3"

	  dotest branches4-5 "${testcvs} -q tag -b xxx branches/file* mixed*/file2 mixed*/file4" \
"T branches/file1
T branches/file2
T branches/file3
T branches/file4
T mixed/file2
T mixed/file4
T mixed2/file2
T mixed2/file4"

	  # make sure we get the appropriate warnings when updating	  
	  dotest branches4-6 "${testcvs} update -r xxx" \
"${SPROG} update: Updating \.
${SPROG} update: Updating branches
${SPROG} update: Updating mixed
${SPROG} update: warning: xxx is a branch tag in some files and a revision tag in others\.
${SPROG} update: Updating mixed2
${SPROG} update: warning: xxx is a branch tag in some files and a revision tag in others\.
${SPROG} update: Updating versions"

	  # make sure we don't get warned in quiet modes
	  dotest branches4-7 "${testcvs} -q update -A"
	  dotest branches4-8 "${testcvs} -q update -r xxx"
	  dotest branches4-9 "${testcvs} -q update -A"
	  dotest branches4-10 "${testcvs} -Q update -r xxx"

	  # make sure the Tag files are correct
	  dotest branches4-11 "cat branches/CVS/Tag" "Txxx"
	  dotest branches4-12 "cat mixed/CVS/Tag" "Nxxx"
	  dotest branches4-13 "cat mixed2/CVS/Tag" "Nxxx"
	  dotest branches4-14 "cat versions/CVS/Tag" "Nxxx"

	  # We only warn if there's mixed usage in a single directory.
	  # We may want to consider changing that in the future.
	  dotest branches4-15 "${testcvs} update -r xxx branches versions" \
"${SPROG} update: Updating branches
${SPROG} update: Updating versions"

	  dokeep
	  cd ../..
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  rm -r branches4
	  ;;



	tagc)
	  # Test the tag -c option.
	  mkdir 1; cd 1
	  dotest tagc-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest tagc-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  touch file1 file2
	  dotest tagc-3 "${testcvs} add file1 file2" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: scheduling file .file2. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  dotest tagc-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.1"
	  dotest tagc-5 "${testcvs} -q tag -c tag1" \
"T file1
T file2"
	  touch file1 file2
	  dotest tagc-6 "${testcvs} -q tag -c tag2" \
"T file1
T file2"
	  # Avoid timestamp granularity bugs (FIXME: CVS should be
	  # doing the sleep, right?).
	  sleep 1
	  echo myedit >>file1
	  dotest tagc-6a "${testcvs} rm -f file2" \
"${SPROG} remove: scheduling .file2. for removal
${SPROG} remove: use .${SPROG} commit. to remove this file permanently"
	  touch file3
	  dotest tagc-6b "${testcvs} add file3" \
"${SPROG} add: scheduling file .file3. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest_fail tagc-7 "${testcvs} -q tag -c tag3" \
"${SPROG} tag: file1 is locally modified
${SPROG} tag: file2 is locally modified
${SPROG} tag: file3 is locally modified
${SPROG} \[tag aborted\]: correct the above errors first!"
	  cd ../..
	  mkdir 2
	  cd 2
	  dotest tagc-8 "${testcvs} -q co first-dir" \
"U first-dir/file1
U first-dir/file2"
	  cd ../1/first-dir
	  dotest tagc-9 "${testcvs} -q ci -m modify" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: delete; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file3,v  <--  file3
initial revision: 1\.1"
	  cd ../../2/first-dir
	  dotest tagc-10 "${testcvs} -q tag -c tag4" \
"${SPROG} tag: \`file2' is no longer in the repository
T file1
T file2"

	  dokeep
	  cd ../..
	  rm -r 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	update-p)
	  # Make sure `cvs update -p -rT FILE' works from a branch when
	  # FILE is already on the trunk and is being added to that branch.

	  mkdir 1; cd 1
	  module=x

	  echo > unused-file

	  # Create the module.
	  dotest update-p-1 \
	    "$testcvs -Q import -m. $module X Y" ''

	  file=F
	  # Check it out and tag it.
	  dotest update-p-2 "$testcvs -Q co $module" ''
	  cd $module
	  dotest update-p-3 "$testcvs -Q tag -b B" ''
	  echo v1 > $file
	  dotest update-p-4 "$testcvs -Q add $file" ''
	  dotest update-p-5 "$testcvs -Q ci -m. $file"
	  dotest update-p-6 "$testcvs -Q tag T $file" ''
	  dotest update-p-7 "$testcvs -Q update -rB" ''

	  # This merge effectively adds file F on branch B.
	  dotest update-p-8 "$testcvs -Q update -jT" ''

	  # Before the fix that prompted the addition of this test,
	  # the following command would fail with this diagnostic:
	  # cvs update: conflict: F created independently by second party
	  dotest update-p-9 "$testcvs update -p -rT $file" \
"===================================================================
Checking out $file
RCS:  ${CVSROOT_DIRNAME}/$module/$file,v
VERS: 1\.1
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
v1"

	  # Repeat the above, but with $file removed.
	  # This exercises a slightly different code path.
	  rm $file
	  # Before the fix that prompted the addition of this test,
	  # the following command would fail with this diagnostic:
	  # cvs update: warning: new-born \`F' has disappeared
	  dotest update-p-10 "$testcvs update -p -rT $file" \
"===================================================================
Checking out $file
RCS:  ${CVSROOT_DIRNAME}/$module/$file,v
VERS: 1\.1
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
v1"

	  # Exercise yet another code path:
	  # the one that involves reviving a `dead' file.
	  # And a little more, for good measure...
	  touch new
	  dotest update-p-a1 "$testcvs -Q add new" ''
	  dotest update-p-a2 "$testcvs -Q update -p new" ''
	  dotest update-p-a3 "$testcvs -Q rm -f new" ''

	  # Both an update -A, *and* the following update are required
	  # to return to the state of being on the trunk with a $file
	  # that we can then remove.
	  dotest update-p-undead-0 "$testcvs update -A" \
"${SPROG} update: Updating \.
${SPROG} update: warning: new-born \`$file' has disappeared"
	  dotest update-p-undead-1 "$testcvs update" \
"${SPROG} update: Updating \.
U $file"
	  dotest update-p-undead-2 "$testcvs -Q update -p -rT $file" v1
	  dotest update-p-undead-3 "$testcvs -Q rm -f $file" ''
	  dotest update-p-undead-4 "$testcvs -Q update -p -rT $file" v1
	  dotest update-p-undead-5 "$testcvs -Q ci -m. $file"
	  dotest update-p-undead-6 "$testcvs -Q update -p -rT $file" v1
	  echo v2 > $file
	  dotest update-p-undead-7 "$testcvs -Q update -p -rT $file" v1
	  dotest update-p-undead-8 "$testcvs add $file" \
"$SPROG add: Re-adding file .$file. after dead revision 1\.2\.
$SPROG add: use \`$SPROG commit' to add this file permanently"

	  dotest update-p-undead-9 "$testcvs -Q update -p -rT $file" v1

	  dokeep
	  cd ../..
	  rm -rf 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/$module
	  ;;



	tagf)
	  # More tagging tests, including using tag -F -B to convert a
	  # branch tag to a regular tag and recovering thereof.

	  # Setup; check in first-dir/file1
	  mkdir 1; cd 1
	  dotest tagf-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest tagf-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  touch file1 file2
	  dotest tagf-3 "${testcvs} add file1 file2" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: scheduling file .file2. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  dotest tagf-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.1"

	  # Now create a branch and commit a revision there.
	  dotest tagf-5 "${testcvs} -q tag -b br" "T file1
T file2"
	  dotest tagf-6 "${testcvs} -q update -r br" ""
	  echo brmod >> file1
	  echo brmod >> file2
	  dotest tagf-7 "${testcvs} -q ci -m modify" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.1\.2\.1; previous revision: 1\.1"
	  # Here we try to make it a non-branch tag, but will
	  # succeed in getting only warnings, even with -F 
	  # because converting a branch tag to non-branch 
	  # is potentially catastrophic.
	  dotest tagf-8a "${testcvs} -q tag -F br" \
"${SPROG} tag: file1: Not moving branch tag .br. from 1\.1\.2\.1 to 1\.1\\.2\.1\.
${SPROG} tag: file2: Not moving branch tag .br. from 1\.1\.2\.1 to 1\.1\.2\.1\."
	  # however, if we *really* are sure we want to move a branch tag,
	  # "-F -B" will do the trick
	  dotest tagf-8 "${testcvs} -q tag -F -B br" "T file1
T file2"
	  echo moremod >> file1
	  echo moremod >> file2
	  dotest tagf-9 "${testcvs} -q status -v file1" \
"===================================================================
File: file1            	Status: Locally Modified

   Working revision:	1\.1\.2\.1.*
   Repository revision:	1\.1\.2\.1	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		br (revision: 1\.1\.2\.1)
   Sticky Date:		(none)
   Sticky Options:	(none)

   Existing Tags:
	br                       	(revision: 1\.1\.2\.1)"

	  # Now, how do we recover?
	  dotest tagf-10 "${testcvs} -q tag -d br" "D file1
D file2"
	  # This creates a new branch, 1.1.4.  See the code in RCS_magicrev
	  # which will notice that there is a (non-magic) 1.1.2 and thus
	  # skip that number.
	  dotest tagf-11 "${testcvs} -q tag -r 1.1 -b br file1" "T file1"
	  # Fix it with admin -n (cf admin-18, admin-26-4).
	  dotest tagf-12 "${testcvs} -q admin -nbr:1.1.2 file2" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
done"
	  # Another variation on the file2 test would be to use two working
	  # directories so that the update -r br would need to
	  # a merge to get from 1.1.2.1 to the head of the 1.1.2 branch.
	  dotest tagf-13 "${testcvs} -q update -r br" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.1\.2\.1
retrieving revision 1\.1
Merging differences between 1\.1\.2\.1 and 1\.1 into file1
rcsmerge: warning: conflicts during merge
${SPROG} update: conflicts found in file1
C file1
M file2"
	  # CVS is giving a conflict because we are trying to get back to
	  # 1.1.4.  I'm not sure why it is a conflict rather than just
	  # "M file1".
	  dotest tagf-14 "cat file1" \
"<<<<<<< file1
brmod
moremod
[=]======
[>]>>>>>> 1\.1"
	  echo resolve >file1
	  dotest tagf-15 "${testcvs} -q ci -m recovered" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.4\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.1\.2\.2; previous revision: 1\.1\.2\.1"
	  # try accidentally deleting branch tag, "tag -d"
	  dotest_fail tagf-16 "${testcvs} tag -d br" \
"${SPROG} tag: Untagging \.
${SPROG} tag: Not removing branch tag .br. from .${CVSROOT_DIRNAME}/first-dir/file1,v.\.
${SPROG} tag: Not removing branch tag .br. from .${CVSROOT_DIRNAME}/first-dir/file2,v.\."
	  # try accidentally deleting branch tag, "rtag -d"
	  dotest_fail tagf-17 "${testcvs} rtag -d br first-dir" \
"${SPROG} rtag: Untagging first-dir
${SPROG} rtag: Not removing branch tag .br. from .${CVSROOT_DIRNAME}/first-dir/file1,v.\.
${SPROG} rtag: Not removing branch tag .br. from .${CVSROOT_DIRNAME}/first-dir/file2,v.\."
	  # try accidentally converting branch tag to non-branch tag "tag -F"
	  dotest tagf-18 "${testcvs} tag -r1.1 -F br file1" \
"${SPROG} tag: file1: Not moving branch tag .br. from 1\.1\.4\.1 to 1\.1\."
	  # try accidentally converting branch tag to non-branch tag "rtag -F"
	  dotest tagf-19 "${testcvs} rtag -r1.1 -F br first-dir" \
"${SPROG} rtag: Tagging first-dir
${SPROG} rtag: first-dir/file1: Not moving branch tag .br. from 1\.1\.4\.1 to 1\.1\.
${SPROG} rtag: first-dir/file2: Not moving branch tag .br. from 1\.1\.2\.2 to 1\.1\."
	  # create a non-branch tag
	  dotest tagf-20 "${testcvs} rtag regulartag first-dir" \
"${SPROG} rtag: Tagging first-dir"
	  # try accidentally converting non-branch tag to branch tag (tag -F -B -b)
	  dotest tagf-21 "${testcvs} tag -F -B -b regulartag file1" \
"${SPROG} tag: file1: Not moving non-branch tag .regulartag. from 1\.1 to 1\.1\.4\.1\.0\.2 due to .-B. option\."
	  # try accidentally converting non-branch tag to branch rtag (rtag -F -B -b)
	  dotest tagf-22 "${testcvs} rtag -F -B -b regulartag first-dir" \
"${SPROG} rtag: Tagging first-dir
${SPROG} rtag: first-dir/file1: Not moving non-branch tag .regulartag. from 1\.1 to 1\.1\.0\.6 due to .-B. option\.
${SPROG} rtag: first-dir/file2: Not moving non-branch tag .regulartag. from 1\.1 to 1\.1\.0\.4 due to .-B. option\."
	  # Try accidentally deleting non-branch: (tag -d -B)
	  dotest_fail tagf-23 "${testcvs} tag -d -B regulartag file1" \
"${SPROG} tag: Not removing non-branch tag .regulartag. from .${CVSROOT_DIRNAME}/first-dir/file1,v. due to .-B. option\."
	  # Try accidentally deleting non-branch: (rtag -d -B)
	  dotest_fail tagf-24 \
		"${testcvs} rtag -d -B regulartag first-dir" \
"${SPROG} rtag: Untagging first-dir
${SPROG} rtag: Not removing non-branch tag .regulartag. from .${CVSROOT_DIRNAME}/first-dir/file1,v. due to .-B. option\.
${SPROG} rtag: Not removing non-branch tag .regulartag. from .${CVSROOT_DIRNAME}/first-dir/file2,v. due to .-B. option\."

	  # the following tests (throught the next commit) keep moving the same
	  # tag back and forth between 1.1.6 & 1.1.8  in file1 and between
	  # 1.1.4 and 1.1.6 in file2 since nothing was checked in on some of
	  # these branches and CVS only tracks branches via tags unless they contain data.

	  # try intentionally converting non-branch tag to branch tag (tag -F -b)
	  dotest tagf-25a "${testcvs} tag -F -b regulartag file1" "T file1"
	  # try intentionally moving a branch tag to a newly created branch (tag -F -b -B)
	  dotest tagf-25b "${testcvs} tag -F -B -b -r1.1 regulartag file1" \
"T file1"
	  # try intentionally converting mixed tags to branch tags (rtag -F -b)
	  dotest tagf-26a "${testcvs} rtag -F -b regulartag first-dir" \
"${SPROG} rtag: Tagging first-dir
${SPROG} rtag: first-dir/file1: Not moving branch tag .regulartag. from 1\.1 to 1\.1\.0\.8\."
	  # try intentionally converting a branch to a new branch tag (rtag -F -b -B)
	  dotest tagf-26b "${testcvs} rtag -F -B -b -r1.1 regulartag first-dir" \
"${SPROG} rtag: Tagging first-dir"
	  # update to our new branch
	  dotest tagf-27 "${testcvs} update -r regulartag" \
"${SPROG} update: Updating \.
U file1
U file2"
	  # commit some changes and see that all rev numbers look right
	  echo changes >> file1
	  echo changes >> file2
	  dotest tagf-28 "${testcvs} ci -m changes" \
"${CPROG} commit: Examining \.
${CVSROOT_DIRNAME}/first-dir/file1,v  <--  file1
new revision: 1\.1\.8\.1; previous revision: 1\.1
${CVSROOT_DIRNAME}/first-dir/file2,v  <--  file2
new revision: 1\.1\.6\.1; previous revision: 1\.1"
	  # try intentional branch to non-branch (tag -F -B)
	  dotest tagf-29 "${testcvs} tag -F -B -r1.1 regulartag file1" \
"T file1"
	  # try non-branch to non-branch (tag -F -B)
	  dotest tagf-29a "${testcvs} tag -F -B -r br regulartag file1" \
"${SPROG} tag: file1: Not moving non-branch tag .regulartag. from 1\.1 to 1\.1\.4\.1 due to .-B. option\."
	  # try mixed-branch to non-branch (rtag -F -B )
	  dotest tagf-29b "${testcvs} rtag -F -B -r br regulartag first-dir" \
"${SPROG} rtag: Tagging first-dir
${SPROG} rtag: first-dir/file1: Not moving non-branch tag .regulartag. from 1\.1 to 1\.1\.4\.1 due to .-B. option\."
	  # at this point, regulartag is a regular tag within
	  # file1 and file2

	  # try intentional branch to non-branch (rtag -F -B)
	  dotest tagf-30 "${testcvs} rtag -F -B -r1.1 br first-dir"  \
"${SPROG} rtag: Tagging first-dir"
	  # create a branch tag so we can try to delete it.
	  dotest tagf-31 "${testcvs} rtag -b brtag first-dir"  \
"${SPROG} rtag: Tagging first-dir"
	
	  # try intentinal deletion of branch tag (tag -d -B)
	  dotest tagf-32 "${testcvs} tag -d -B brtag file1" "D file1"
	  # try intentinal deletion of branch tag (rtag -d -B)
	  dotest tagf-33 "${testcvs} rtag -d -B brtag first-dir" \
"${SPROG} rtag: Untagging first-dir"

	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	tag-space)
	  # Test tags with spaces in the names.
	  #
	  # Prior to releases 1.11.18 & 1.12.10, some commands used with
	  # tags with spaces in the names could hang CVS.

	  # Setup; check in first-dir/file1
	  mkdir 1; cd 1
	  dotest tag-space-init-1 "$testcvs -q co -l ."
	  mkdir first-dir
	  dotest tag-space-init-2 "$testcvs add first-dir" \
"Directory $CVSROOT_DIRNAME/first-dir added to the repository"
	  cd first-dir
	  touch file1
	  dotest tag-space-init-3 "$testcvs add file1" \
"$SPROG add: scheduling file \`file1' for addition
$SPROG add: use \`$SPROG commit' to add this file permanently"
	  dotest tag-space-init-4 "$testcvs -Q ci -m add"

	  # Reportedly, the following two tags make it past WinCVS.
	  dotest_fail tag-space-1 "$testcvs tag ' spacetag '" \
"$SPROG \[tag aborted\]: tag \` spacetag ' must start with a letter"
	  dotest_fail tag-space-2 "$testcvs tag 'spacetag '" \
"$SPROG \[tag aborted\]: tag \`spacetag ' has non-visible graphic characters"

	  if $remote; then
	    # Verify that this isn't a client check.
	    dotest tag-space-3 "$testcvs server" \
"E $SPROG \[tag aborted\]: tag \` spacetag ' must start with a letter
error  " <<EOF
Root $CVSROOT_DIRNAME
UseUnchanged
Argument --
Argument  spacetag 
Directory .
$CVSROOT_DIRNAME/first-dir
Entry /file1/1.1///
Unchanged file1
tag
EOF

	    dotest tag-space-4 "$testcvs server" \
"E $SPROG \[tag aborted\]: tag \`spacetag ' has non-visible graphic characters
error  " <<EOF
Root $CVSROOT_DIRNAME
UseUnchanged
Argument --
Argument spacetag 
Directory .
$CVSROOT_DIRNAME/first-dir
Entry /file1/1.1///
Unchanged file1
tag
EOF
	  fi # $remote

	  # Any number of normal tags and branches were handled correctly.
	  dotest tag-space-5 "$testcvs -Q tag t1"
	  dotest tag-space-5b "$testcvs -Q tag t2"
	  dotest tag-space-5c "$testcvs -Q tag -b b1"

	  cd ../..
	  mkdir 2; cd 2

	  # But once a vendor branch exists, it's all over.
	  mkdir project; cd project
	  touch file1
	  dotest tag-space-init-4 \
"$testcvs -Q import -mimport second-dir VENDOR RELEASE"

	  cd ..

	  dotest_fail tag-space-6 "$testcvs -Q co -r ' spacetag ' first-dir" \
"$SPROG \[checkout aborted\]: tag \` spacetag ' must start with a letter"

	  # But when any files were imported, this test hung prior to CVS
	  # versions 1.11.18 & 1.12.10.
	  dotest_fail tag-space-7 "$testcvs -Q co -r ' spacetag ' second-dir" \
"$SPROG \[checkout aborted\]: tag \` spacetag ' must start with a letter"

	  if $remote; then
	    # I based the client input in the next two tests on actual input
	    # from WinCVS 1.2.
	    dotest tag-space-8 "$testcvs server" \
"E $SPROG \[checkout aborted\]: tag \` spacetag ' must start with a letter
error  " <<EOF
Root $CVSROOT_DIRNAME
Argument -P
Argument -r
Argument  spacetag 
Argument first-dir
Directory .
$CVSROOT_DIRNAME
co
EOF

	    # Verify the test is not on the client side.
	    dotest tag-space-9 "$testcvs server" \
"E $SPROG \[checkout aborted\]: tag \` spacetag ' must start with a letter
error  " <<EOF
Root $CVSROOT_DIRNAME
Argument -P
Argument -r
Argument  spacetag 
Argument second-dir
Directory .
$CVSROOT_DIRNAME
co
EOF
	  fi # $remote

	  dotest tag-space-10 "$testcvs -Q co second-dir"
	  cd second-dir

	  # This test would also hang.
	  dotest_fail tag-space-11 "$testcvs -Q up -r ' spacetag '" \
"$SPROG \[update aborted\]: tag \` spacetag ' must start with a letter"

	  if $remote; then
	    dotest tag-space-12 "$testcvs server" \
"E $SPROG \[update aborted\]: tag \` spacetag ' must start with a letter
error  " <<EOF
Root $CVSROOT_DIRNAME
Argument -r
Argument  spacetag 
Argument -u
Argument --
Directory .
$CVSROOT_DIRNAME
Unchanged file1
update
EOF
	  fi # $remote

	  # I'm skipping tests for other commands that may have had the same
	  # problem.  Hopefully, if a new issue arises, one of the above tests
	  # will catch the problem.

	  if $keep; then
	    echo Keeping $TESTDIR and exiting due to --keep
	    exit 0
	  fi

	  cd ../..
	  rm -r 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir \
	                     $CVSROOT_DIRNAME/second-dir
	  ;;



	rcslib)
	  # Test librarification of RCS.
	  # First: test whether `cvs diff' handles $Name expansion
	  # correctly.	We diff two revisions with their symbolic tags;
	  # neither tag should be expanded in the output.  Also diff
	  # one revision with the working copy.

	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  dotest rcsdiff-1 "${testcvs} -q co first-dir" ''
	  cd first-dir
	  echo "I am the first foo, and my name is $""Name$." > foo.c
	  dotest rcsdiff-2 "${testcvs} add -m new-file foo.c" \
"${SPROG} add: scheduling file .foo\.c. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest rcsdiff-3 "${testcvs} commit -m rev1 foo.c" \
"${CVSROOT_DIRNAME}/first-dir/foo.c,v  <--  foo\.c
initial revision: 1\.1"
	  dotest rcsdiff-4 "${testcvs} tag first foo.c" "T foo\.c"
	  dotest rcsdiff-5 "${testcvs} update -p -r first foo.c" \
"===================================================================
Checking out foo\.c
RCS:  ${CVSROOT_DIRNAME}/first-dir/foo\.c,v
VERS: 1\.1
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
I am the first foo, and my name is \$""Name: first \$\."

	  echo "I am the second foo, and my name is $""Name$." > foo.c
	  dotest rcsdiff-6 "${testcvs} commit -m rev2 foo.c" \
"${CVSROOT_DIRNAME}/first-dir/foo\.c,v  <--  foo\.c
new revision: 1\.2; previous revision: 1\.1"
	  dotest rcsdiff-7 "${testcvs} tag second foo.c" "T foo\.c"
	  dotest rcsdiff-8 "${testcvs} update -p -r second foo.c" \
"===================================================================
Checking out foo\.c
RCS:  ${CVSROOT_DIRNAME}/first-dir/foo\.c,v
VERS: 1\.2
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
I am the second foo, and my name is \$""Name: second \$\."

	dotest_fail rcsdiff-9 "${testcvs} diff -r first -r second" \
"${SPROG} diff: Diffing \.
Index: foo\.c
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/foo\.c,v
retrieving revision 1\.1
retrieving revision 1\.2
diff -r1\.1 -r1\.2
1c1
< I am the first foo, and my name is \$""Name:  \$\.
---
> I am the second foo, and my name is \$""Name:  \$\."

	  echo "I am the once and future foo, and my name is $""Name$." > foo.c
	  dotest_fail rcsdiff-10 "${testcvs} diff -r first" \
"${SPROG} diff: Diffing \.
Index: foo\.c
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/foo\.c,v
retrieving revision 1\.1
diff -r1\.1 foo\.c
1c1
< I am the first foo, and my name is \$""Name:  \$\.
---
> I am the once and future foo, and my name is \$""Name\$\."

	  # Test handling of libdiff options.  diff gets quite enough
	  # of a workout elsewhere in sanity.sh, so we assume that it's
	  # mostly working properly if it passes all the other tests.
	  # The main one we want to try is regex handling, since we are
	  # using CVS's regex matcher and not diff's.

	  cat >rgx.c <<EOF
test_regex (whiz, bang)
{
foo;
bar;
baz;
grumble;
}
EOF

	  dotest rcslib-diffrgx-1 "${testcvs} -q add -m '' rgx.c" \
"${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest rcslib-diffrgx-2 "${testcvs} -q ci -m '' rgx.c" \
"$CVSROOT_DIRNAME/first-dir/rgx\.c,v  <--  rgx\.c
initial revision: 1\.1"
	  cat >rgx.c <<EOF
test_regex (whiz, bang)
{
foo;
bar;
baz;
mumble;
}
EOF
	  # Use dotest_fail because exit status from `cvs diff' must be 1.
	  #
	  # Incidentally test that CVS no longer splits diff arguments on
	  # spaces.
	  dotest_fail rcslib-diffrgx-3 "$testcvs diff -c -F'.* (' rgx.c" \
"Index: rgx\.c
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/rgx\.c,v
retrieving revision 1\.1
diff -c -F '\.\* (' -r1\.1 rgx\.c
\*\*\* rgx\.c	${RFCDATE}	1\.1
--- rgx\.c	${RFCDATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\* test_regex (whiz, bang)
\*\*\* 3,7 \*\*\*\*
  foo;
  bar;
  baz;
! grumble;
  }
--- 3,7 ----
  foo;
  bar;
  baz;
! mumble;
  }"

	  # Tests of rcsmerge/diff3.  Merge operations get a good general
	  # workout elsewhere; we want to make sure that options are still
	  # handled properly.  Try merging two branches with -kv, to test
	  # both -j and -k switches.

	  cd ..

	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  rm -r first-dir

	  mkdir 1; cd 1
	  dotest rcslib-merge-1 "$testcvs -q co -l ."
	  mkdir first-dir
	  dotest rcslib-merge-2 "$testcvs -q add first-dir" \
"Directory $CVSROOT_DIRNAME.*/first-dir added to the repository"
	  cd ..; rm -r 1

	  dotest rcslib-merge-3 "$testcvs -q co first-dir" ""
	  cd first-dir

	  echo '$''Revision$' > file1
	  echo '2' >> file1
	  echo '3' >> file1
	  dotest rcslib-merge-4 "${testcvs} -q add file1" \
"${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest rcslib-merge-5 "${testcvs} -q commit -m '' file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  sed -e 's/2/two/' file1 > f; mv f file1
	  dotest rcslib-merge-6 "${testcvs} -q commit -m '' file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1"
	  dotest rcslib-merge-7 "${testcvs} -q tag -b -r 1.1 patch1" "T file1"
	  dotest rcslib-merge-8 "${testcvs} -q update -r patch1" "[UP] file1"
	  dotest rcslib-merge-9 "${testcvs} -q status" \
"===================================================================
File: file1            	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		patch1 (branch: 1\.1\.2)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest rcslib-merge-10 "cat file1" \
'$''Revision: 1\.1 $
2
3'
	  sed -e 's/3/three/' file1 > f; mv f file1
	  dotest rcslib-merge-11 "${testcvs} -q commit -m '' file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.1; previous revision: 1\.1"
	  dotest rcslib-merge-12 "${testcvs} -q update -kv -j1.2" \
"U file1
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.1
retrieving revision 1\.2
Merging differences between 1\.1 and 1\.2 into file1
rcsmerge: warning: conflicts during merge"
	  dotest rcslib-merge-13 "cat file1" \
"<<<<<<< file1
1\.1\.2\.1
2
three
[=]======
1\.2
two
3
[>]>>>>>> 1\.2"

	  # Test behavior of symlinks in the repository.
	  if test -n "$remotehost"; then
	    # Create the link on the remote system.  This is because Cygwin's
	    # Windows support creates *.lnk files for Windows.  When creating
	    # these in an SMB share from UNIX, these links won't work from the
	    # UNIX side.
	    modify_repo $CVS_RSH $remotehost "'ln -s file1,v $CVSROOT_DIRNAME/first-dir/file2,v'"
	  else
	    modify_repo ln -s file1,v $CVSROOT_DIRNAME/first-dir/file2,v
	  fi
	  dotest rcslib-symlink-2 "$testcvs update file2" "U file2"
	  echo "This is a change" >> file2
	  dotest rcslib-symlink-3 "$testcvs ci -m because file2" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file2
new revision: 1\.1\.2\.2; previous revision: 1\.1\.2\.1"

	  # Switch as for rcslib-symlink-1
	  if test -n "$remotehost"; then
	    dotest rcslib-symlink-4 "$CVS_RSH $remotehost 'ls -l $CVSROOT_DIRNAME/first-dir/file2,v'" \
".*$CVSROOT_DIRNAME/first-dir/file2,v -> file1,v"
	  else
	    dotest rcslib-symlink-4 "ls -l $CVSROOT_DIRNAME/first-dir/file2,v" \
".*$CVSROOT_DIRNAME/first-dir/file2,v -> file1,v"
	  fi

	  # CVS was failing to check both the symlink and the file
	  # for timestamp changes for a while.  Test that.
	  rm file1
	  dotest rcslib-symlink-3a "${testcvs} -q up file1" \
"${SPROG} update: warning: \`file1' was lost
U file1"
	  echo "This is a change" >> file1
	  dotest rcslib-symlink-3b "${testcvs} ci -m because file1" \
"${CVSROOT_DIRNAME}/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.[0-9]*; previous revision: 1\.1\.2\.[0-9]*"
	  dotest rcslib-symlink-3c "${testcvs} update file2" "[UP] file2"

	  echo some new text >file3
	  dotest rcslib-symlink-3d "${testcvs} -Q add file3" ''
	  dotest rcslib-symlink-3e "$testcvs -Q ci -mtest file3"

	  rm -f ${CVSROOT_DIRNAME}/first-dir/file2,v
	  # As for rcslib-symlink-1
	  if test -n "$remotehost"; then
	    modify_repo "$CVS_RSH $remotehost 'ln -s Attic/file3,v $CVSROOT_DIRNAME/first-dir/file2,v'"
	  else
	    modify_repo ln -s Attic/file3,v $CVSROOT_DIRNAME/first-dir/file2,v
	  fi

	  dotest rcslib-symlink-3g "$testcvs update file2" "U file2"

	  # restore the link to file1 for the following tests
	  dotest rcslib-symlink-3i "$testcvs -Q rm -f file3" ''
	  dotest rcslib-symlink-3j "$testcvs -Q ci -mwhatever file3"
	  rm -f $CVSROOT_DIRNAME/first-dir/file2,v
	  rm -f $CVSROOT_DIRNAME/first-dir/Attic/file3,v
	  # As for rcslib-symlink-1
	  if test -n "$remotehost"; then
	    modify_repo "$CVS_RSH $remotehost 'ln -s file1,v $CVSROOT_DIRNAME/first-dir/file2,v'"
	  else
	    modify_repo ln -s file1,v $CVSROOT_DIRNAME/first-dir/file2,v
	  fi

	  # Test 5 reveals a problem with having symlinks in the
	  # repository.  CVS will try to tag both of the files
	  # separately.  After processing one, it will do the same
	  # operation to the other, which is actually the same file,
	  # so the tag will already be there.  FIXME: do we bother
	  # changing operations to notice cases like this?  This
	  # strikes me as a difficult problem.  -Noel
	  dotest rcslib-symlink-5 "$testcvs tag the_tag" \
"$SPROG tag: Tagging .
T file1
W file2 : the_tag already exists on version 1.1.2.3 : NOT MOVING tag to version 1.1.2.1"
	  # As for rcslib-symlink-1
	  if test -n "$remotehost"; then
	    dotest rcslib-symlink-6 "$CVS_RSH $remotehost 'ls -l $CVSROOT_DIRNAME/first-dir/file2,v'" \
".*$CVSROOT_DIRNAME/first-dir/file2,v -> file1,v"
	  else
	    dotest rcslib-symlink-6 "ls -l $CVSROOT_DIRNAME/first-dir/file2,v" \
".*$CVSROOT_DIRNAME/first-dir/file2,v -> file1,v"
	  fi

	  # Symlinks tend to interact poorly with the Attic.
	  cd ..
	  mkdir 2; cd 2
	  dotest rcslib-symlink-7 "$testcvs -q co first-dir" \
"U first-dir/file1
U first-dir/file2"
	  cd first-dir
	  dotest rcslib-symlink-8 "$testcvs rm -f file2" \
"$SPROG remove: scheduling .file2. for removal
$SPROG remove: use .$SPROG commit. to remove this file permanently"
	  dotest rcslib-symlink-9 "$testcvs -q ci -m rm-it" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file2
new revision: delete; previous revision: 1\.2"
	  # OK, why this message happens twice is relatively clear
	  # (the check_* and rtag_* calls to start_recursion).
	  # Why it happens a third time I didn't try to find out.
	  #
	  # DRP: One of the error messages disappeared while I was making
	  # proxy modifications.  Until I detect a deeper issue, I'm not
	  # going to stress over it.
	  #
	  # DRP: Both messages disappear starting with glibc 2.3.3 due to a bug
	  # in the glob function which causes it to fail to return broken
	  # symlinks.  I'm submitting a bug fix to glibc which will hopefully
	  # be released with glibc 2.3.6.  Once it is released and versions
	  # 2.3.3-2.3.5 of glibc become uncommon, the first, empty case below
	  # should be removed again.
	  dotest rcslib-symlink-10 \
"$testcvs -q rtag -b -r the_tag brtag first-dir" "" \
"$SPROG rtag: could not read RCS file for first-dir/file2
$SPROG rtag: could not read RCS file for first-dir/file2"

	  # Restore file1 for the next test.
	  dotest rcslib-long-symlink-init-1 "$testcvs -Q up -A"
	  dotest rcslib-long-symlink-init-2 "$testcvs -Q add file1"
	  dotest rcslib-long-symlink-init-3 "$testcvs -Q ci -mback"

	  cd ../..  # $TESTDIR

	  # CVS has a hard-coded default link path size of 127 characters.
	  # Make sure it knows how to exceed that.
	  longpath=$CVSROOT_DIRNAME
	  count=0
	  while test $count -lt 10; do
	    # 10 * 30 characters + len $CVSROOT_DIRNAME
	    count=`expr $count + 1`
	    longpath=$longpath/123456789012345678901234567890
	    modify_repo mkdir $longpath
	  done
	  modify_repo cp $CVSROOT_DIRNAME/first-dir/file1,v $longpath
	  modify_repo mkdir $CVSROOT_DIRNAME/second-dir

	  # Switch as for rcslib-symlink-1
	  if test -n "$remotehost"; then
	    modify_repo $CVS_RSH $remotehost \
	    'ln -s $longpath/file1,v $CVSROOT_DIRNAME/second-dir/fileX,v'
	  else
	    modify_repo ln -s $longpath/file1,v \
			      $CVSROOT_DIRNAME/second-dir/fileX,v
	  fi

	  dotest rcslib-long-symlink-2 "$testcvs co second-dir" \
"$SPROG checkout: Updating second-dir
U second-dir/fileX"

	  cd second-dir
	  echo change-it >>fileX

	  # Writes actually cause symlinks to be resolved.
	  dotest rcslib-long-symlink-3 "$testcvs -q ci -mwrite-it" \
"$CVSROOT_DIRNAME/123456789012345678901234567890/123456789012345678901234567890/123456789012345678901234567890/123456789012345678901234567890/123456789012345678901234567890/123456789012345678901234567890/123456789012345678901234567890/123456789012345678901234567890/123456789012345678901234567890/123456789012345678901234567890/file1,v  <--  fileX
new revision: 1\.5; previous revision: 1\.4"

	  dokeep
	  cd ..

	  # Must remove the symlink first.  Samba doesn't appear to show
	  # broken symlink across the SMB share, and rm -rf by itself
	  # will remove file1,v first and leave file2,v a broken link and the
	  # rm -rf will fail since it doesn't find file2,v and it still gets
	  # directory not empty errors removing cvsroot/first-dir.
	  #
	  # I'm not sure why I need to do this on $remotehost.  The rm above
	  # rcslib-symlink-3j works fine, but the next one doesn't unless run
	  # remotely under Cygwin and using a TESTDIR on a Samba share.
	  if test -n "$remotehost"; then
	    $CVS_RSH $remotehost \
"rm -f $CVSROOT_DIRNAME/first-dir/file2,v $CVSROOT_DIRNAME/second-dir/fileX,v"
	  fi
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir \
			     $CVSROOT_DIRNAME/second-dir \
			     $CVSROOT_DIRNAME/123456789012345678901234567890
	  rm -r first-dir second-dir 2
	  ;;



	multibranch)
	  # Test the ability to have several branchpoints coming off the
	  # same revision.
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  dotest multibranch-1 "${testcvs} -q co first-dir" ''
	  cd first-dir
	  echo 1:trunk-1 >file1
	  dotest multibranch-2 "${testcvs} add file1" \
"${SPROG}"' add: scheduling file `file1'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  dotest_lit multibranch-3 "${testcvs} -q ci -m add-it" <<HERE
$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1.1
HERE
	  dotest multibranch-4 "${testcvs} tag -b br1" \
"${SPROG} tag: Tagging \.
T file1"
	  dotest multibranch-5 "${testcvs} tag -b br2" \
"${SPROG} tag: Tagging \.
T file1"
	  dotest multibranch-6 "${testcvs} -q update -r br1" ''
	  echo on-br1 >file1
	  dotest multibranch-7 "${testcvs} -q ci -m modify-on-br1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.1; previous revision: 1\.1"
	  dotest multibranch-8 "${testcvs} -q update -r br2" '[UP] file1'
	  echo br2 adds a line >>file1
	  dotest multibranch-9 "${testcvs} -q ci -m modify-on-br2" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.4\.1; previous revision: 1\.1"
	  dotest multibranch-10 "${testcvs} -q update -r br1" '[UP] file1'
	  dotest multibranch-11 "cat file1" 'on-br1'
	  dotest multibranch-12 "${testcvs} -q update -r br2" '[UP] file1'
	  dotest multibranch-13 "cat file1" '1:trunk-1
br2 adds a line'

	  dotest multibranch-14 "${testcvs} log file1" \
"
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
	br2: 1\.1\.0\.4
	br1: 1\.1\.0\.2
keyword substitution: kv
total revisions: 3;	selected revisions: 3
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
branches:  1\.1\.2;  1\.1\.4;
add-it
----------------------------
revision 1\.1\.4\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
modify-on-br2
----------------------------
revision 1\.1\.2\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -1;  commitid: ${commitid};
modify-on-br1
============================================================================="

	  dokeep
	  cd ..
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  rm -r first-dir
	  ;;



	import) # test death after import
		# Tests of "cvs import":
		# basic2
		# rdiff  -- imports with keywords
		# import  -- more tests of imports with keywords
		# importb  -- -b option.
		# importc -- bunch o' files in bunch o' directories
		# importX  -- -X option.
		# importX2 -- CVSROOT/config ImportNewFilesToVendorBranchOnly
		#             flag
		# modules3
		# mflag -- various -m messages
		# ignore  -- import and cvsignore
		# binwrap -- import and -k wrappers
		# info -- imports which are rejected by verifymsg
		# head -- intended to test vendor branches and HEAD,
		#   although it doesn't really do it yet.
		# import-CVS -- refuse to import directories named "CVS".
		# import-quirks -- short tests of import quirks.

		# import
		mkdir import-dir ; cd import-dir

		for i in 1 2 3 4 ; do
		  echo imported file"$i" > imported-f"$i"
		done

		# This directory should be on the default ignore list,
		# so it shouldn't get imported.
		mkdir RCS
		echo ignore.me >RCS/ignore.me

		echo 'import should not expand $''Id$' >>imported-f2
		cp imported-f2 ../imported-f2-orig.tmp

		dotest_sort import-96 \
"${testcvs} import -m first-import first-dir vendor-branch junk-1_0" \
"

I first-dir/RCS
N first-dir/imported-f1
N first-dir/imported-f2
N first-dir/imported-f3
N first-dir/imported-f4
No conflicts created by this import"

		dotest import-96.5 "cmp ../imported-f2-orig.tmp imported-f2" ''

		cd ..

		# co
		dotest import-97 "${testcvs} -q co first-dir" \
"U first-dir/imported-f1
U first-dir/imported-f2
U first-dir/imported-f3
U first-dir/imported-f4"

		cd first-dir

		for i in 1 2 3 4 ; do
		  dotest import-98-$i "test -f imported-f$i" ''
		done
		dotest_fail import-98.5 "test -d RCS" ''

		# remove
		rm imported-f1
		dotest import-99 "${testcvs} rm imported-f1" \
"${SPROG}"' remove: scheduling `imported-f1'\'' for removal
'"${SPROG}"' remove: use .'"${SPROG}"' commit. to remove this file permanently'

		# change
		echo local-change >> imported-f2

		# commit
		dotest import-100 "${testcvs} ci -m local-changes" \
"${CPROG} commit: Examining .
${CVSROOT_DIRNAME}/first-dir/imported-f1,v  <--  imported-f1
new revision: delete; previous revision: 1\.1\.1\.1
${CVSROOT_DIRNAME}/first-dir/imported-f2,v  <--  imported-f2
new revision: 1\.2; previous revision: 1\.1"

		# log
		dotest import-101 "${testcvs} log imported-f1" \
"
RCS file: ${CVSROOT_DIRNAME}/first-dir/Attic/imported-f1,v
Working file: imported-f1
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	junk-1_0: 1\.1\.1\.1
	vendor-branch: 1\.1\.1
keyword substitution: kv
total revisions: 3;	selected revisions: 3
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: dead;  lines: ${PLUS}0 -0;  commitid: ${commitid};
local-changes
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
branches:  1\.1\.1;
Initial revision
----------------------------
revision 1\.1\.1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}0 -0;  commitid: ${commitid};
first-import
============================================================================="

		# update into the vendor branch.
		dotest import-102 "${testcvs} update -rvendor-branch" \
"${SPROG} update: Updating .
[UP] imported-f1
[UP] imported-f2"

		# remove file4 on the vendor branch
		rm imported-f4
		dotest import-103 "${testcvs} rm imported-f4" \
"${SPROG}"' remove: scheduling `imported-f4'\'' for removal
'"${SPROG}"' remove: use .'"${SPROG}"' commit. to remove this file permanently'

		# commit
		dotest import-104 \
"${testcvs} ci -m vendor-removed imported-f4" \
"${CVSROOT_DIRNAME}/first-dir/imported-f4,v  <--  imported-f4
new revision: delete; previous revision: 1\.1\.1\.1"

		# update to main line
		dotest import-105 "${testcvs} -q update -A" \
"${SPROG} update: \`imported-f1' is no longer in the repository
[UP] imported-f2"

		# second import - file4 deliberately unchanged
		cd ../import-dir
		for i in 1 2 3 ; do
		  echo rev 2 of file $i >> imported-f"$i"
		done
		cp imported-f2 ../imported-f2-orig.tmp

		dotest_sort import-106 \
"${testcvs} import -m second-import first-dir vendor-branch junk-2_0" \
"


 ${CPROG} checkout -j<prev_rel_tag> -jjunk-2_0 first-dir
2 conflicts created by this import.
C first-dir/imported-f1
C first-dir/imported-f2
I first-dir/RCS
U first-dir/imported-f3
U first-dir/imported-f4
Use the following command to help the merge:"

		dotest import-106.5 "cmp ../imported-f2-orig.tmp imported-f2" \
''

		cd ..

		rm imported-f2-orig.tmp

		# co
		dotest import-107 "${testcvs} co first-dir" \
"${SPROG} checkout: Updating first-dir
[UP] first-dir/imported-f3
[UP] first-dir/imported-f4"

		cd first-dir

		dotest_fail import-108 "test -f imported-f1" ''

		for i in 2 3 ; do
		  dotest import-109-$i "test -f imported-f$i" ''
		done

		# check vendor branch for file4
		dotest import-110 "${testcvs} -q update -rvendor-branch" \
"[UP] imported-f1
[UP] imported-f2"

		dotest import-111 "test -f imported-f4" ''

		# update to main line
		dotest import-112 "${testcvs} -q update -A" \
"${SPROG} update: \`imported-f1' is no longer in the repository
[UP] imported-f2"

		cd ..

		dotest import-113 \
"${testcvs} -q co -jjunk-1_0 -jjunk-2_0 first-dir" \
"${SPROG} checkout: file first-dir/imported-f1 does not exist, but is present in revision junk-2_0
RCS file: ${CVSROOT_DIRNAME}/first-dir/imported-f2,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.1\.1\.2
Merging differences between 1\.1\.1\.1 and 1\.1\.1\.2 into imported-f2
rcsmerge: warning: conflicts during merge
first-dir/imported-f3 already contains the differences between 1\.1\.1\.1 and 1\.1\.1\.2
first-dir/imported-f4 already contains the differences between 1\.1\.1\.1 and 1\.1\.1\.3"

		cd first-dir

		dotest_fail import-114 "test -f imported-f1" ''

		for i in 2 3 ; do
		  dotest import-115-$i "test -f imported-f$i" ''
		done

		dotest import-116 'cat imported-f2' \
'imported file2
[<]<<<<<< imported-f2
import should not expand \$''Id: imported-f2,v 1\.2 [0-9/]* [0-9:]* '"${username}"' Exp \$
local-change
[=]======
import should not expand \$''Id: imported-f2,v 1\.1\.1\.2 [0-9/]* [0-9:]* '"${username}"' Exp \$
rev 2 of file 2
[>]>>>>>> 1\.1\.1\.2'

		dokeep
		cd ..
		rm -r first-dir
		modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
		rm -r import-dir
		;;



	importb)
	  # More cvs import tests, especially -b option.

	  # OK, first we get some sources from the NetMunger project, and
	  # import them into the 1.1.1 vendor branch.
	  mkdir imp-dir
	  cd imp-dir
	  echo 'OpenMunger sources' >file1
	  echo 'OpenMunger sources' >file2
	  dotest_sort importb-1 \
"${testcvs} import -m add first-dir openmunger openmunger-1_0" \
"

N first-dir/file1
N first-dir/file2
No conflicts created by this import"
	  cd ..
	  rm -r imp-dir

	  # Now we put the sources we get from FreeMunger into 1.1.3
	  mkdir imp-dir
	  cd imp-dir
	  echo 'FreeMunger sources' >file1
	  echo 'FreeMunger sources' >file2
	  # Not completely sure how the conflict detection is supposed to
	  # be working here (haven't really thought about it).
	  # We use an explicit -d option to test that it is reflected
	  # in the suggested checkout.
	  dotest_sort importb-2 \
"$testcvs -d '$CVSROOT' import -m add -b 1.1.3 \
          first-dir freemunger freemunger-1_0" \
"


 ${CPROG} -d ${CVSROOT} checkout -j<prev_rel_tag> -jfreemunger-1_0 first-dir
2 conflicts created by this import.
C first-dir/file1
C first-dir/file2
Use the following command to help the merge:"
	  cd ..
	  rm -r imp-dir

	  # Now a test of main branch import (into second-dir, not first-dir).
	  mkdir imp-dir
	  cd imp-dir
	  echo 'my own stuff' >mine1.c
	  echo 'my own stuff' >mine2.c
	  dotest_fail importb-3 \
"${testcvs} import -m add -b 1 second-dir dummy really_dumb_y" \
"$CPROG \[import aborted\]: Only numeric branch specifications with two dots are
supported by import, not \`1'\.  For example: \`1\.1\.1'\."
	  : when we implement main-branch import, should be \
"N second-dir/mine1\.c
N second-dir/mine2\.c

No conflicts created by this import"
	  cd ..
	  rm -r imp-dir

	  mkdir 1
	  cd 1
	  # when we implement main branch import, will want to 
	  # add "second-dir" here.
	  dotest importb-4 "${testcvs} -q co first-dir" \
"U first-dir/file1
U first-dir/file2"
	  cd first-dir
	  dotest importb-5 "${testcvs} -q log file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch: 1\.1\.1
locks: strict
access list:
symbolic names:
	freemunger-1_0: 1\.1\.3\.1
	freemunger: 1\.1\.3
	openmunger-1_0: 1\.1\.1\.1
	openmunger: 1\.1\.1
keyword substitution: kv
total revisions: 3;	selected revisions: 3
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
branches:  1\.1\.1;  1\.1\.3;
Initial revision
----------------------------
revision 1\.1\.3\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -1;  commitid: ${commitid};
add
----------------------------
revision 1\.1\.1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}0 -0;  commitid: ${commitid};
add
============================================================================="

	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir \
			     $CVSROOT_DIRNAME/second-dir
	  ;;



	importc)
	  # Test importing a bunch o' files in a bunch o' directories.
	  # Also the -d option.

	  # Set a predictable time zone for these tests.
	  save_TZ=$TZ
	  TZ=UTC0; export TZ

	  mkdir 1; cd 1
	  mkdir adir bdir cdir
	  mkdir adir/sub1 adir/sub2
	  mkdir adir/sub1/ssdir
	  mkdir bdir/subdir
	  touch adir/sub1/file1 adir/sub2/file2 adir/sub1/ssdir/ssfile
	  touch -t ${TOUCH1971} bdir/subdir/file1
	  touch -t ${TOUCH2034} cdir/cfile
	  dotest_sort importc-1 \
"${testcvs} import -d -m import-it first-dir vendor release" \
"

N first-dir/adir/sub1/file1
N first-dir/adir/sub1/ssdir/ssfile
N first-dir/adir/sub2/file2
N first-dir/bdir/subdir/file1
N first-dir/cdir/cfile
No conflicts created by this import
${SPROG} import: Importing ${CVSROOT_DIRNAME}/first-dir/adir
${SPROG} import: Importing ${CVSROOT_DIRNAME}/first-dir/adir/sub1
${SPROG} import: Importing ${CVSROOT_DIRNAME}/first-dir/adir/sub1/ssdir
${SPROG} import: Importing ${CVSROOT_DIRNAME}/first-dir/adir/sub2
${SPROG} import: Importing ${CVSROOT_DIRNAME}/first-dir/bdir
${SPROG} import: Importing ${CVSROOT_DIRNAME}/first-dir/bdir/subdir
${SPROG} import: Importing ${CVSROOT_DIRNAME}/first-dir/cdir"
	  cd ..
	  mkdir 2; cd 2
	  dotest importc-2 "${testcvs} -q co first-dir" \
"U first-dir/adir/sub1/file1
U first-dir/adir/sub1/ssdir/ssfile
U first-dir/adir/sub2/file2
U first-dir/bdir/subdir/file1
U first-dir/cdir/cfile"
	  cd first-dir
	  dotest importc-3 "${testcvs} update adir/sub1" \
"${SPROG} update: Updating adir/sub1
${SPROG} update: Updating adir/sub1/ssdir"
	  dotest importc-4 "${testcvs} update adir/sub1 bdir/subdir" \
"${SPROG} update: Updating adir/sub1
${SPROG} update: Updating adir/sub1/ssdir
${SPROG} update: Updating bdir/subdir"

	  echo modify >>cdir/cfile
	  dotest importc-5 \
"${testcvs} -q rtag -b -r release wip_test first-dir" ""
	  dotest importc-6 "${testcvs} -q update -r wip_test" "M cdir/cfile"

	  # This used to fail in local mode
	  dotest importc-7 "${testcvs} -q ci -m modify -r wip_test" \
"$CVSROOT_DIRNAME/first-dir/cdir/cfile,v  <--  cdir/cfile
new revision: 1\.1\.1\.1\.2\.1; previous revision: 1\.1\.1\.1"

	  # TODO: should also be testing "import -d" when we update
	  # an existing file.
	  dotest importc-8 "${testcvs} -q log cdir/cfile" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/cdir/cfile,v
Working file: cdir/cfile
head: 1\.1
branch: 1\.1\.1
locks: strict
access list:
symbolic names:
	wip_test: 1\.1\.1\.1\.0\.2
	release: 1\.1\.1\.1
	vendor: 1\.1\.1
keyword substitution: kv
total revisions: 3;	selected revisions: 3
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE2034};  author: ${username};  state: Exp;  commitid: ${commitid};
branches:  1\.1\.1;
Initial revision
----------------------------
revision 1\.1\.1\.1
date: ${ISO8601DATE2034};  author: ${username};  state: Exp;  lines: ${PLUS}0 -0;  commitid: ${commitid};
branches:  1\.1\.1\.1\.2;
import-it
----------------------------
revision 1\.1\.1\.1\.2\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
modify
============================================================================="

	  dotest importc-9 "${testcvs} -q log bdir/subdir/file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/bdir/subdir/file1,v
Working file: bdir/subdir/file1
head: 1\.1
branch: 1\.1\.1
locks: strict
access list:
symbolic names:
	wip_test: 1\.1\.1\.1\.0\.2
	release: 1\.1\.1\.1
	vendor: 1\.1\.1
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE1971};  author: ${username};  state: Exp;  commitid: ${commitid};
branches:  1\.1\.1;
Initial revision
----------------------------
revision 1\.1\.1\.1
date: ${ISO8601DATE1971};  author: ${username};  state: Exp;  lines: ${PLUS}0 -0;  commitid: ${commitid};
import-it
============================================================================="
	  cd ..

	  # Now tests of absolute pathnames and .. as repository directory.
	  cd ../1
	  dotest_fail importc-10 \
"${testcvs} import -m imp ../other vendor release2" \
"${CPROG} \[import aborted\]: directory \.\./other not relative within the repository"
	  dotest_fail importc-11 \
"${testcvs} import -m imp ${TESTDIR}/other vendor release3" \
"${CPROG} \[import aborted\]: directory ${TESTDIR}/other not relative within the repository"
	  dotest_fail importc-12 "test -d ${TESTDIR}/other" ""

	  dokeep
	  TZ=$save_TZ
	  cd ..
	  rm -r 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	importX)
	  # More cvs import tests, especially -X option.

	  # OK, first we get some sources from the Munger version 0.9,
	  # and import them into the 1.1.1 vendor branch (w/o -X).  (This
	  # will be used to test subsequent imports of the same file
	  # with -X.)
	  mkdir imp-dir
	  cd imp-dir
	  echo 'Munger sources 0.9' >file0
	  dotest_sort importX-1 \
"${testcvs} import -m add first-dir munger munger-0_9" \
"

N first-dir/file0
No conflicts created by this import"
	  cd ..
	  rm -r imp-dir

	  # Now we put the sources we get from Munger version 1.0 on
	  # to the 1.1.1 vendor branch using -X.  (This imports a new
	  # version of file0, and imports all-new files file1 and file2.)
	  mkdir imp-dir
	  cd imp-dir
	  echo 'Munger sources' >file0
	  echo 'Munger sources' >file1
	  echo 'Munger sources' >file2
	  dotest_sort importX-2 \
"${testcvs} import -X -m add first-dir munger munger-1_0" \
"


 ${CPROG} checkout -j<prev_rel_tag> -jmunger-1_0 first-dir
N first-dir/file1
N first-dir/file2
No conflicts created by this import.
U first-dir/file0
Use the following command to help the merge:"
	  cd ..
	  rm -r imp-dir

	  # Now we put the sources we get from Munger version 1.1 on
	  # to the 1.1.1 vendor branch using -X.  (This imports unchanged
	  # versions of file0 and file2, a changed version of file1, and
	  # an all-new file3.)
	  mkdir imp-dir
	  cd imp-dir
	  echo 'Munger sources' >file0
	  echo 'Munger sources 1.1' >file1
	  echo 'Munger sources' >file2
	  echo 'Munger sources 1.1' >file3
	  dotest_sort importX-3 \
"$testcvs -d '$CVSROOT' import -X -m add first-dir munger munger-1_1" \
"


 ${CPROG} -d ${CVSROOT} checkout -j<prev_rel_tag> -jmunger-1_1 first-dir
1 conflicts created by this import.
C first-dir/file1
N first-dir/file3
U first-dir/file0
U first-dir/file2
Use the following command to help the merge:"
	  cd ..
	  rm -r imp-dir

	  mkdir 1
	  cd 1
	  # only file0 should be checked out
	  dotest importX-4 "${testcvs} -q co first-dir" \
"U first-dir/file0"
	  cd first-dir

	  dotest importX-5 "${testcvs} -q log file0" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file0,v
Working file: file0
head: 1\.1
branch: 1\.1\.1
locks: strict
access list:
symbolic names:
	munger-1_1: 1\.1\.1\.2
	munger-1_0: 1\.1\.1\.2
	munger-0_9: 1\.1\.1\.1
	munger: 1\.1\.1
keyword substitution: kv
total revisions: 3;	selected revisions: 3
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
branches:  1\.1\.1;
Initial revision
----------------------------
revision 1\.1\.1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -1;  commitid: ${commitid};
add
----------------------------
revision 1\.1\.1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}0 -0;  commitid: ${commitid};
add
============================================================================="

	  dotest importX-6 "${testcvs} -q log file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/Attic/file1,v
Working file: file1
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	munger-1_1: 1\.1\.1\.2
	munger-1_0: 1\.1\.1\.1
	munger: 1\.1\.1
keyword substitution: kv
total revisions: 4;	selected revisions: 4
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: dead;  lines: ${PLUS}0 -0;  commitid: ${commitid};
Revision 1\.1 was added on the vendor branch\.
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
branches:  1\.1\.1;
Initial revision
----------------------------
revision 1\.1\.1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -1;  commitid: ${commitid};
add
----------------------------
revision 1\.1\.1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}0 -0;  commitid: ${commitid};
add
============================================================================="

	  cd ../..
	  rm -r 1
	  modify_repo rm -rf ${CVSROOT_DIRNAME}/first-dir
	  ;;



	importX2)
	  # Test ImportNewFilesToVendorBranchOnly config file option.

	  # On Windows, we can't check out CVSROOT, because the case
	  # insensitivity means that this conflicts with cvsroot.
	  mkdir wnt
	  cd wnt

	  dotest importX2-1 "${testcvs} -q co CVSROOT" "[UP] CVSROOT${DOTSTAR}"
	  cd CVSROOT
          echo "ImportNewFilesToVendorBranchOnly=yes" >> config

	  dotest importX2-2 "$testcvs -q ci -m force-cvs-import-X" \
"$TESTDIR/cvsroot/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	  cd ../..

	  # Import a sources file, but do NOT specify -X.  The new file
	  # should be killed, anyway (because of the config option).
	  mkdir imp-dir
	  cd imp-dir
	  echo 'source' >file1
	  dotest_sort importX2-3 \
"${testcvs} import -m add first-dir source source-1_0" \
"


 ${CPROG} checkout -j<prev_rel_tag> -jsource-1_0 first-dir
N first-dir/file1
No conflicts created by this import.
Use the following command to help the merge:"
	  cd ..
	  rm -r imp-dir

	  mkdir 1
	  cd 1
	  # **nothing** should be checked out**
	  dotest importX2-4 "${testcvs} -q co first-dir" ""

	  cd first-dir
	  dotest importX2-5 "${testcvs} -q log file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/Attic/file1,v
Working file: file1
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	source-1_0: 1\.1\.1\.1
	source: 1\.1\.1
keyword substitution: kv
total revisions: 3;	selected revisions: 3
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: dead;  lines: ${PLUS}0 -0;  commitid: ${commitid};
Revision 1\.1 was added on the vendor branch\.
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
branches:  1\.1\.1;
Initial revision
----------------------------
revision 1\.1\.1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}0 -0;  commitid: ${commitid};
add
============================================================================="

	  dokeep
	  cd ../..
	  restore_adm
	  rm -r 1
	  rm -r wnt
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	import-CVS)
	  mkdir import-CVS
	  cd import-CVS
	  touch file1 file2 file3
	  dotest_fail import-CVS-1 "$testcvs import CVS vtag rtag" \
"$CPROG import: The word \`CVS' is reserved by CVS and may not be used
$CPROG \[import aborted\]: as a directory in a path or as a file name\."
	  mkdir sdir
	  mkdir sdir/CVS
	  touch sdir/CVS/file4 sdir/CVS/file5 sdir/file6 sdir/file7
	  # Calling the imported directory import-CVS is dual purpose in the
	  # following test.  It makes sure the path test which matched above
	  # wasn't too strict.
	  dotest_sort import-CVS-2 \
"$testcvs import -I! -mimport import-CVS vtag rtag" \
"

I import-CVS/sdir/CVS
N import-CVS/file1
N import-CVS/file2
N import-CVS/file3
N import-CVS/sdir/file6
N import-CVS/sdir/file7
No conflicts created by this import
$SPROG import: Importing $CVSROOT_DIRNAME/import-CVS/sdir"

	  dokeep
	  cd ..
	  rm -r import-CVS
	  modify_repo rm -rf $CVSROOT_DIRNAME/import-CVS
	  ;;



	import-quirks)
	  # Short tests of quirky import behavior.
	  #
	  # For a list of other import tests with short descriptions, see the
	  # comment header of the "import" test.
	  mkdir import-quirks
	  cd import-quirks
	  touch file1 file2 file3

	  # CVS prior to 1.11.18 and 1.12.10 used to happily import to
	  # "branch 1.1", creating RCS archives with revisions like,
	  # "1.1..1".  That double-dot is *not* a typo.
	  dotest_fail import-quirks-1 \
"$testcvs import -b1.1. -mbad-bad-bad import-quirks VB RT" \
"$CPROG \[import aborted\]: Only numeric branch specifications with two dots are
supported by import, not \`1\.1\.'\.  For example: \`1\.1\.1'\."

	  dotest_fail import-quirks-2 \
"$testcvs import -b1.1.1.. -mbad-bad-bad import-quirks VB RT" \
"$CPROG \[import aborted\]: Only numeric branch specifications with two dots are
supported by import, not \`1\.1\.1\.\.'\.  For example: \`1\.1\.1'\."

	  # Try a few odd numbers.  This is hardly comprehensive.
	  dotest_sort import-quirks-2 \
"$testcvs import -b10.10.101 -mthis-ones-ok import-quirks-2 VB RT" \
"

N import-quirks-2/file1
N import-quirks-2/file2
N import-quirks-2/file3
No conflicts created by this import"

	  dotest_sort import-quirks-3 \
"$testcvs import -b2345678901.2345678901.2345678901 -mthis-ones-ok import-quirks-3 VB RT" \
"

N import-quirks-3/file1
N import-quirks-3/file2
N import-quirks-3/file3
No conflicts created by this import"

	  dotest_sort import-quirks-4 \
"$testcvs import -b1.1.2 -mthis-ones-ok import-quirks-4 VB RT" \
"

N import-quirks-4/file1
N import-quirks-4/file2
N import-quirks-4/file3
No conflicts created by this import"

	  dokeep
	  cd ..
	  rm -r import-quirks
	  rm -rf $CVSROOT_DIRNAME/import-quirks-2 \
		 $CVSROOT_DIRNAME/import-quirks-3 \
		 $CVSROOT_DIRNAME/import-quirks-4
	  ;;



	import-after-initial)
	  # Properly handle the case in which the first version of a
	  # file is created by a regular cvs add and commit, and there
	  # is a subsequent cvs import of the same file.  cvs update with
	  # a date tag must resort to searching the vendor branch only if
	  # the initial version of the file was created at the same time
	  # as the initial version on the vendor branch.

	  mkdir 1; cd 1
	  module=x

	  echo > unused-file

	  # Create the module.
	  dotest import-after-initial-1 \
	    "$testcvs -Q import -m. $module X Y" ''

	  file=m
	  # Check it out and add a file.
	  dotest import-after-initial-2 "$testcvs -Q co $module" ''
	  cd $module
	  echo original > $file
	  dotest import-after-initial-3 "${testcvs} -Q add $file" ""
	  dotest import-after-initial-4 "$testcvs -Q ci -m. $file"

	  # Delay a little so the following import isn't done in the same
	  # second as the preceding commit.
	  sleep 2

	  # Do the first import of $file *after* $file already has an
	  # initial version.
	  mkdir sub
	  cd sub
	  echo newer-via-import > $file
	  dotest import-after-initial-5 \
	    "$testcvs -Q import -m. $module X Y2" ''
	  cd ..

	  # Sleep a second so we're sure to be after the second of the import.
	  sleep 1

	  dotest import-after-initial-6 \
	    "$testcvs -Q update -p -D now $file" 'original'

	  dokeep
	  cd ../..
	  rm -rf 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/$module
	  ;;



        branch-after-import)
	  # Test branching after an import via both cvs tag -b and
	  # cvs add to verify that the HEAD remains at 1.1.1.1
	  # This was a FreeBSD bug documented at the URL:
	  # http://www.freebsd.org/cgi/query-pr.cgi?pr=4033

	  mkdir branch-after-import
	  cd branch-after-import

	  # OK, first we get some sources from the NetMunger project,
	  # and import them into the 1.1.1 vendor branch.
	  mkdir imp-dir
	  cd imp-dir
	  echo 'OpenMunger sources' >file1
	  echo 'OpenMunger sources' >file2
	  dotest_sort branch-after-import-1 \
"${testcvs} import -m add first-dir openmunger openmunger-1_0" \
'

N first-dir/file1
N first-dir/file2
No conflicts created by this import'
	  cd ..

	  # Next checkout the new module
	  dotest branch-after-import-2 \
"${testcvs} -q co first-dir" \
'U first-dir/file1
U first-dir/file2'
	  cd first-dir
	  # Branch tag the file1 and cvs add file2,
	  # the branch should remain the same in both cases
	  # such that a new import will not require a conflict
	  # resolution.
	  dotest branch-after-import-3 \
"${testcvs} tag -b TESTTOTRON file1" \
'T file1'
	  dotest branch-after-import-4 \
"${testcvs} -q update -r TESTTOTRON" \
"${SPROG} update: \`file2' is no longer in the repository"

	  cp ../imp-dir/file2 .
	  dotest branch-after-import-5 \
"${testcvs} add file2" \
"${SPROG} add: scheduling file .file2. for addition on branch .TESTTOTRON.
${SPROG} add: use .${SPROG} commit. to add this file permanently"

	  dotest branch-after-import-6 \
"$testcvs commit -m cvs-add file2" \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.1\.1\.1\.2\.2; previous revision: 1\.1\.1\.1\.2\.1"

	  dokeep
	  cd ../..
	  rm -r branch-after-import
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	join)
	  # Test doing joins which involve adding and removing files.
	  #   Variety of scenarios (see list below), in the context of:
	  #     * merge changes from T1 to T2 into the main line
	  #     * merge changes from branch 'branch' into the main line
	  #     * merge changes from branch 'branch' into branch 'br2'.
	  # See also binfile2, which does similar things with binary files.
	  # See also join2, which tests joining (and update -A) on only
	  # a single file, rather than a directory.
	  # See also rmadd2, which tests -j cases not involving branches
	  #   (e.g. undoing a commit)
	  # See also join3, which tests some cases involving the greatest
	  # common ancestor.  Here is a list of tests according to branch
	  # topology:
	  #
	  # --->bp---->trunk          too many to mention
	  #     \----->branch
	  #
	  #     /----->branch1
	  # --->bp---->trunk          multibranch, multibranch2
	  #     \----->branch2
	  #
	  # --->bp1----->bp2---->trunk   join3
	  #     \->br1   \->br2
	  #
	  # --->bp1----->trunk
	  #     \----bp2---->branch                branches
	  #          \------>branch-of-branch

	  # We check merging changes from T1 to T2 into the main line.
	  # Here are the interesting cases I can think of:
	  #   1) File added between T1 and T2, not on main line.
	  #      File should be marked for addition.
	  #   2) File added between T1 and T2, also added on main line.
	  #      Conflict.
	  #   3) File removed between T1 and T2, unchanged on main line.
	  #      File should be marked for removal.
	  #   4) File removed between T1 and T2, modified on main line.
	  #      If mod checked in, file should be marked for removal.
	  #	 If mod still in working directory, conflict.
	  #   5) File removed between T1 and T2, was never on main line.
	  #      Nothing should happen.
	  #   6) File removed between T1 and T2, also removed on main line.
	  #      Nothing should happen.
	  #   7) File not added between T1 and T2, added on main line.
	  #      Nothing should happen.
	  #   8) File not modified between T1 and T2, removed on main line.
	  #      Nothing should happen.
	  #   9) File modified between T1 and T2, removed on main line.
	  #      Conflict.
	  #  10) File was never on branch, removed on main line.
	  #      Nothing should happen.

	  # We also check merging changes from a branch into the main
	  # line.  Here are the interesting cases:
	  #   1) File added on branch, not on main line.
	  #      File should be marked for addition.
	  #   2) File added on branch, also added on main line.
	  #      Conflict.
	  #   3) File removed on branch, unchanged on main line.
	  #      File should be marked for removal.
	  #   4) File removed on branch, modified on main line.
	  #      Conflict.
	  #   5) File removed on branch, was never on main line.
	  #      Nothing should happen.
	  #   6) File removed on branch, also removed on main line.
	  #      Nothing should happen.
	  #   7) File added on main line, not added on branch.
	  #      Nothing should happen.
	  #   8) File removed on main line, not modified on branch.
	  #      Nothing should happen.
	  #   9) File modified on branch, removed on main line.
	  #      Conflict.
	  #  10) File was never on branch, removed on main line.
	  #      Nothing should happen.

	  # In the tests below, fileN represents case N in the above
	  # lists.

	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  mkdir 1
	  cd 1
	  dotest join-1 "$testcvs -q co first-dir"

	  cd first-dir

	  # Add two files.
	  echo 'first revision of file3' > file3
	  echo 'first revision of file4' > file4
	  echo 'first revision of file6' > file6
	  echo 'first revision of file8' > file8
	  echo 'first revision of file9' > file9
	  dotest join-2 "${testcvs} add file3 file4 file6 file8 file9" \
"${SPROG}"' add: scheduling file `file3'\'' for addition
'"${SPROG}"' add: scheduling file `file4'\'' for addition
'"${SPROG}"' add: scheduling file `file6'\'' for addition
'"${SPROG}"' add: scheduling file `file8'\'' for addition
'"${SPROG}"' add: scheduling file `file9'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add these files permanently'

	  dotest join-3 "${testcvs} -q commit -m add" \
"$CVSROOT_DIRNAME/first-dir/file3,v  <--  file3
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file6,v  <--  file6
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file8,v  <--  file8
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file9,v  <--  file9
initial revision: 1\.1"

	  # Make a branch.
	  dotest join-4 "${testcvs} -q tag -b branch ." \
'T file3
T file4
T file6
T file8
T file9'

	  # Add file2, file7, and file10, modify file4, and remove
	  # file6, file8, and file9.
	  echo 'first revision of file2' > file2
	  echo 'second revision of file4' > file4
	  echo 'first revision of file7' > file7
	  rm file6 file8 file9
	  echo 'first revision of file10' > file10
	  dotest join-5 "${testcvs} add file2 file7 file10" \
"${SPROG}"' add: scheduling file `file2'\'' for addition
'"${SPROG}"' add: scheduling file `file7'\'' for addition
'"${SPROG}"' add: scheduling file `file10'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add these files permanently'
	  dotest join-6 "${testcvs} rm file6 file8 file9" \
"${SPROG}"' remove: scheduling `file6'\'' for removal
'"${SPROG}"' remove: scheduling `file8'\'' for removal
'"${SPROG}"' remove: scheduling `file9'\'' for removal
'"${SPROG}"' remove: use .'"${SPROG}"' commit. to remove these files permanently'
	  dotest join-7 "${testcvs} -q ci -mx ." \
"$CVSROOT_DIRNAME/first-dir/file10,v  <--  file10
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
new revision: 1\.2; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file6,v  <--  file6
new revision: delete; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file7,v  <--  file7
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file8,v  <--  file8
new revision: delete; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file9,v  <--  file9
new revision: delete; previous revision: 1\.1"

	  # Remove file10
	  dotest join-7a "${testcvs} rm -f file10" \
"${SPROG}"' remove: scheduling `file10'\'' for removal
'"${SPROG}"' remove: use .'"${SPROG}"' commit. to remove this file permanently'
	  dotest join-7b "${testcvs} -q ci -mx ." \
"$CVSROOT_DIRNAME/first-dir/file10,v  <--  file10
new revision: delete; previous revision: 1\.1"

	  # Check out the branch.
	  cd ../..
	  mkdir 2
	  cd 2
	  dotest join-8 "${testcvs} -q co -r branch first-dir" \
'U first-dir/file3
U first-dir/file4
U first-dir/file6
U first-dir/file8
U first-dir/file9'

	  cd first-dir

	  # Modify the files on the branch, so that T1 is not an
	  # ancestor of the main line, and add file5
	  echo 'first branch revision of file3' > file3
	  echo 'first branch revision of file4' > file4
	  echo 'first branch revision of file5' > file5
	  echo 'first branch revision of file6' > file6
	  echo 'first branch revision of file9' > file9
	  dotest join-9 "${testcvs} add file5" \
"${SPROG}"' add: scheduling file `file5'\'' for addition on branch `branch'\''
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  dotest join-10 "${testcvs} -q ci -mx ." \
"$CVSROOT_DIRNAME/first-dir/file3,v  <--  file3
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/Attic/file5,v  <--  file5
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/Attic/file6,v  <--  file6
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/Attic/file9,v  <--  file9
new revision: 1\.1\.2\.1; previous revision: 1\.1"

	  # Tag the current revisions on the branch.
	  dotest join-11 "${testcvs} -q tag T1 ." \
'T file3
T file4
T file5
T file6
T file8
T file9'

	  # Add file1 and file2, modify file9, and remove the other files.
	  echo 'first branch revision of file1' > file1
	  echo 'first branch revision of file2' > file2
	  echo 'second branch revision of file9' > file9
	  rm file3 file4 file5 file6
	  dotest join-12 "${testcvs} add file1 file2" \
"${SPROG}"' add: scheduling file `file1'\'' for addition on branch `branch'\''
'"${SPROG}"' add: scheduling file `file2'\'' for addition on branch `branch'\''
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add these files permanently'
	  dotest join-13 "${testcvs} rm file3 file4 file5 file6" \
"${SPROG}"' remove: scheduling `file3'\'' for removal
'"${SPROG}"' remove: scheduling `file4'\'' for removal
'"${SPROG}"' remove: scheduling `file5'\'' for removal
'"${SPROG}"' remove: scheduling `file6'\'' for removal
'"${SPROG}"' remove: use .'"${SPROG}"' commit. to remove these files permanently'
	  dotest join-14 "${testcvs} -q ci -mx ." \
"$CVSROOT_DIRNAME/first-dir/Attic/file1,v  <--  file1
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.1\.2\.2; previous revision: 1\.1\.2\.1
$CVSROOT_DIRNAME/first-dir/file3,v  <--  file3
new revision: delete; previous revision: 1\.1\.2\.1
$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
new revision: delete; previous revision: 1\.1\.2\.1
$CVSROOT_DIRNAME/first-dir/Attic/file5,v  <--  file5
new revision: delete; previous revision: 1\.1\.2\.1
$CVSROOT_DIRNAME/first-dir/Attic/file6,v  <--  file6
new revision: delete; previous revision: 1\.1\.2\.1
$CVSROOT_DIRNAME/first-dir/Attic/file9,v  <--  file9
new revision: 1\.1\.2\.2; previous revision: 1\.1\.2\.1"

	  # Tag the current revisions on the branch.
	  dotest join-15 "${testcvs} -q tag T2 ." \
'T file1
T file2
T file8
T file9'

	  # Do a checkout with a merge.
	  cd ../..
	  mkdir 3
	  cd 3
	  dotest join-16 "${testcvs} -q co -jT1 -jT2 first-dir" \
"U first-dir/file1
U first-dir/file2
${SPROG} checkout: file first-dir/file2 exists, but has been added in revision T2
U first-dir/file3
${SPROG} checkout: scheduling \`first-dir/file3' for removal
U first-dir/file4
${SPROG} checkout: scheduling \`first-dir/file4' for removal
U first-dir/file7
${SPROG} checkout: file first-dir/file9 does not exist, but is present in revision T2"

	  # Verify that the right changes have been scheduled.
	  cd first-dir
	  dotest join-17 "${testcvs} -q update" \
'A file1
R file3
R file4'

	  # Modify file4 locally, and do an update with a merge.
	  cd ../../1/first-dir
	  echo 'third revision of file4' > file4
	  dotest join-18 "${testcvs} -q update -jT1 -jT2 ." \
"U file1
$SPROG update: file file2 exists, but has been added in revision T2
$SPROG update: scheduling \`file3' for removal
M file4
$SPROG update: file file4 is locally modified, but has been removed in revision T2
$SPROG update: file file9 does not exist, but is present in revision T2"

	  # Verify that the right changes have been scheduled.
	  dotest join-19 "${testcvs} -q update" \
'A file1
R file3
M file4'

	  # Do a checkout with a merge from a single revision.

	  # FIXME: CVS currently gets this wrong.  file2 has been
	  # added on both the branch and the main line, and so should
	  # be regarded as a conflict.  However, given the way that
	  # CVS sets up the RCS file, there is no way to distinguish
	  # this case from the case of file2 having existed before the
	  # branch was made.  This could be fixed by reserving
	  # a revision somewhere, perhaps 1.1, as an always dead
	  # revision which can be used as the source for files added
	  # on branches.
	  cd ../../3
	  rm -r first-dir
	  dotest join-20 "${testcvs} -q co -jbranch first-dir" \
"U first-dir/file1
U first-dir/file2
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
retrieving revision 1\.1
retrieving revision 1\.1\.2\.2
Merging differences between 1\.1 and 1\.1\.2\.2 into file2
U first-dir/file3
${SPROG} checkout: scheduling \`first-dir/file3' for removal
U first-dir/file4
${SPROG} checkout: file first-dir/file4 has been modified, but has been removed in revision branch
U first-dir/file7
${SPROG} checkout: file first-dir/file9 does not exist, but is present in revision branch"

	  # Verify that the right changes have been scheduled.
	  # The M file2 line is a bug; see above join-20.
	  cd first-dir
	  dotest join-21 "${testcvs} -q update" \
'A file1
M file2
R file3'

	  # Checkout the main line again.
	  cd ../../1
	  rm -r first-dir
	  dotest join-22 "${testcvs} -q co first-dir" \
'U first-dir/file2
U first-dir/file3
U first-dir/file4
U first-dir/file7'

	  # Modify file4 locally, and do an update with a merge from a
	  # single revision.
	  # The file2 handling is a bug; see above join-20.
	  cd first-dir
	  echo 'third revision of file4' > file4
	  dotest join-23 "${testcvs} -q update -jbranch ." \
"U file1
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
retrieving revision 1\.1
retrieving revision 1\.1\.2\.2
Merging differences between 1\.1 and 1\.1\.2\.2 into file2
${SPROG} update: scheduling \`file3' for removal
M file4
${SPROG} update: file file4 is locally modified, but has been removed in revision branch
${SPROG} update: file file9 does not exist, but is present in revision branch"

	  # Verify that the right changes have been scheduled.
	  # The M file2 line is a bug; see above join-20
	  dotest join-24 "${testcvs} -q update" \
'A file1
M file2
R file3
M file4'

	  cd ..

	  # Checkout the main line again and make a new branch which we
	  # merge to.
	  rm -r first-dir
	  dotest join-25 "${testcvs} -q co first-dir" \
'U first-dir/file2
U first-dir/file3
U first-dir/file4
U first-dir/file7'
	  cd first-dir
	  dotest join-26 "${testcvs} -q tag -b br2" \
"T file2
T file3
T file4
T file7"
	  dotest join-27 "${testcvs} -q update -r br2" ""
	  # The handling of file8 and file9 here look fishy to me.  I don't
	  # see why it should be different from the case where we merge to
	  # the trunk (e.g. join-23).
	  dotest join-28 "${testcvs} -q update -j branch" \
"U file1
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
retrieving revision 1.1
retrieving revision 1.1.2.2
Merging differences between 1.1 and 1.1.2.2 into file2
${SPROG} update: scheduling \`file3' for removal
${SPROG} update: file file4 has been modified, but has been removed in revision branch
U file8
U file9"
	  # Verify that the right changes have been scheduled.
	  dotest join-29 "${testcvs} -q update" \
"A file1
M file2
R file3
A file8
A file9"

	  # Checkout the mainline again to try updating and merging between two
	  # branches in the same step
	  # this seems a likely scenario - the user finishes up on branch and
	  # updates to br2 and merges in the same step - and there was a bug
	  # once that if the file was removed in the update then it wouldn't be
	  # readded in the merge
	  cd ..
	  rm -r first-dir
	  dotest join-twobranch-1 "${testcvs} -q co -rbranch first-dir" \
'U first-dir/file1
U first-dir/file2
U first-dir/file8
U first-dir/file9'
	  cd first-dir
	  dotest join-twobranch-2 "${testcvs} -q update -rbr2 -jbranch" \
"${SPROG} update: \`file1' is no longer in the repository
U file1
U file2
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
retrieving revision 1\.1
retrieving revision 1\.1\.2\.2
Merging differences between 1\.1 and 1\.1\.2\.2 into file2
U file3
${SPROG} update: scheduling \`file3' for removal
U file4
${SPROG} update: file file4 has been modified, but has been removed in revision branch
U file7
${SPROG} update: \`file8' is no longer in the repository
U file8
${SPROG} update: \`file9' is no longer in the repository
U file9"
	  # Verify that the right changes have been scheduled.
	  dotest join-twobranch-3 "${testcvs} -q update" \
"A file1
M file2
R file3
A file8
A file9"

	  # Checkout the mainline again to try merging from the trunk
	  # to a branch.
	  cd ..
	  rm -r first-dir
	  dotest join-30 "${testcvs} -q co first-dir" \
'U first-dir/file2
U first-dir/file3
U first-dir/file4
U first-dir/file7'
	  cd first-dir

	  # Tag the current revisions on the trunk.
	  dotest join-31 "${testcvs} -q tag T3 ." \
'T file2
T file3
T file4
T file7'

	  # Modify file7.
	  echo 'second revision of file7' > file7
	  dotest join-32 "${testcvs} -q ci -mx ." \
"$CVSROOT_DIRNAME/first-dir/file7,v  <--  file7
new revision: 1\.2; previous revision: 1\.1"

	  # And Tag again.
	  dotest join-33 "${testcvs} -q tag T4 ." \
'T file2
T file3
T file4
T file7'

	  # Now update branch to T3.
	  cd ../../2/first-dir
	  dotest join-34 "${testcvs} -q up -jT3" \
"${SPROG} update: file file4 does not exist, but is present in revision T3
U file7"

	  # Verify that the right changes have been scheduled.
	  dotest join-35 "${testcvs} -q update" \
'A file7'

	  # Now update to T4.
	  # This is probably a bug, although in this particular case it just
	  # happens to do the right thing; see above join-20.
	  dotest join-36 "${testcvs} -q up -j T3 -j T4" \
"A file7
RCS file: ${CVSROOT_DIRNAME}/first-dir/file7,v
retrieving revision 1\.1
retrieving revision 1\.2
Merging differences between 1\.1 and 1\.2 into file7"

	  # Verify that the right changes have been scheduled.
	  dotest join-37 "${testcvs} -q update" \
'A file7'

	  dokeep
	  cd ../..
	  rm -r 1 2 3
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	join2)
	  # More joining tests.

	  # First the usual setup; create a directory first-dir, a file
	  # first-dir/file1, and a branch br1.
	  mkdir 1; cd 1
	  dotest join2-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest join2-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
          cd first-dir
	  echo 'initial contents of file1' >file1
	  dotest join2-3 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest join2-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  dotest join2-5 "${testcvs} -q tag -b br1" "T file1"
	  dotest join2-6 "${testcvs} -q update -r br1" ""
	  echo 'modify on branch' >>file1
	  touch bradd
	  dotest join2-6a "${testcvs} add bradd" \
"${SPROG} add: scheduling file .bradd. for addition on branch .br1.
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest join2-7 "${testcvs} -q ci -m modify" \
"$CVSROOT_DIRNAME/first-dir/Attic/bradd,v  <--  bradd
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.1; previous revision: 1\.1"

	  # Here is the unusual/pathological part.  We switch back to
	  # the trunk *for file1 only*, not for the whole directory.
	  dotest join2-8 "${testcvs} -q update -A file1" '[UP] file1'
	  dotest join2-9 "${testcvs} -q status file1" \
"===================================================================
File: file1            	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest join2-10 "cat CVS/Tag" "Tbr1"

	  dotest join2-11 "${testcvs} -q update -j br1 file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.1
retrieving revision 1\.1\.2\.1
Merging differences between 1\.1 and 1\.1\.2\.1 into file1"
	  dotest join2-12 "cat file1" "initial contents of file1
modify on branch"
	  # We should have no sticky tag on file1
	  dotest join2-13 "${testcvs} -q status file1" \
"===================================================================
File: file1            	Status: Locally Modified

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest join2-14 "cat CVS/Tag" "Tbr1"
	  # And the checkin should go to the trunk
	  dotest join2-15 "${testcvs} -q ci -m modify file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1"

	  # OK, the above is all well and good and has worked for some
	  # time.  Now try the case where the file had been added on
	  # the branch.
	  dotest join2-16 "${testcvs} -q update -r br1" "[UP] file1"
	  # The workaround is to update the whole directory.
	  # The non-circumvented version won't work.  The reason is that
	  # update removes the entry from CVS/Entries, so of course we get
	  # the tag from CVS/Tag and not Entries.  I suppose maybe
	  # we could invent some new format in Entries which would handle
	  # this, but doing so, and handling it properly throughout
	  # CVS, would be a lot of work and I'm not sure this case justifies
	  # it.
	  dotest join2-17-circumvent "${testcvs} -q update -A" \
"${SPROG} update: \`bradd' is no longer in the repository
[UP] file1"
:	  dotest join2-17 "${testcvs} -q update -A bradd" \
"${SPROG} update: warning: \`bradd' is not (any longer) pertinent"
	  dotest join2-18 "${testcvs} -q update -j br1 bradd" "U bradd"
	  dotest join2-19 "${testcvs} -q status bradd" \
"===================================================================
File: bradd            	Status: Locally Added

   Working revision:	New file!
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/Attic/bradd,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest join2-20 "${testcvs} -q ci -m modify bradd" \
"$CVSROOT_DIRNAME/first-dir/bradd,v  <--  bradd
new revision: 1\.2; previous revision: 1\.1"

	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	join3)
	  # See "join" for a list of other joining/branching tests.
	  # First the usual setup; create a directory first-dir, a file
	  # first-dir/file1, and a branch br1.
	  mkdir 1; cd 1
	  dotest join3-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest join3-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  echo 'initial contents of file1' >file1
	  dotest join3-3 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest join3-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  dotest join3-5 "${testcvs} -q tag -b br1" "T file1"
	  dotest join3-6 "${testcvs} -q update -r br1" ""
	  echo 'br1:line1' >>file1
	  dotest join3-7 "${testcvs} -q ci -m modify" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.1; previous revision: 1\.1"

	  # Now back to the trunk for:
	  # another revision and another branch for file1.
	  # add file2, which will exist on trunk and br2 but not br1.
	  dotest join3-8 "${testcvs} -q update -A" "[UP] file1"
	  echo 'trunk:line1' > file2
	  dotest join3-8a "${testcvs} add file2" \
"${SPROG} add: scheduling file .file2. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  echo 'trunk:line1' >>file1
	  dotest join3-9 "${testcvs} -q ci -m modify" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.1"
	  dotest join3-10 "${testcvs} -q tag -b br2" "T file1
T file2"

	  # Before we actually have any revision on br2, let's try a join
	  dotest join3-11 "${testcvs} -q update -r br1" "[UP] file1
${SPROG} update: \`file2' is no longer in the repository"
	  dotest join3-12 "${testcvs} -q update -j br2" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.1
retrieving revision 1\.2
Merging differences between 1\.1 and 1\.2 into file1
rcsmerge: warning: conflicts during merge
U file2"
	  dotest join3-13 "cat file1" \
"initial contents of file1
[<]<<<<<< file1
br1:line1
[=]======
trunk:line1
[>]>>>>>> 1\.2"
	  rm file1

	  # OK, we'll try the same thing with a revision on br2.
	  dotest join3-14 "${testcvs} -q update -r br2 file1" \
"${SPROG} update: warning: \`file1' was lost
U file1" "U file1"
	  echo 'br2:line1' >>file1
	  dotest join3-15 "${testcvs} -q ci -m modify file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2\.2\.1; previous revision: 1\.2"

	  # OK, now we can join br2 to br1
	  dotest join3-16 "${testcvs} -q update -r br1 file1" "[UP] file1"
	  # It may seem odd, to merge a higher branch into a lower
	  # branch, but in fact CVS defines the ancestor as 1.1
	  # and so it merges both the 1.1->1.2 and 1.2->1.2.2.1 changes.
	  # This seems like a reasonably plausible behavior.
	  dotest join3-17 "${testcvs} -q update -j br2 file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.1
retrieving revision 1\.2\.2\.1
Merging differences between 1\.1 and 1\.2\.2\.1 into file1
rcsmerge: warning: conflicts during merge"
	  dotest join3-18 "cat file1" \
"initial contents of file1
[<]<<<<<< file1
br1:line1
[=]======
trunk:line1
br2:line1
[>]>>>>>> 1\.2\.2\.1"

	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	join4)
	  # Like join, but with local (uncommitted) modifications.

	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  mkdir 1
	  cd 1
	  dotest join4-1 "${testcvs} -q co first-dir" ''

	  cd first-dir

	  # Add two files.
	  echo 'first revision of file3' > file3
	  echo 'first revision of file4' > file4
	  echo 'first revision of file6' > file6
	  echo 'first revision of file8' > file8
	  echo 'first revision of file9' > file9
	  dotest join4-2 "${testcvs} add file3 file4 file6 file8 file9" \
"${SPROG}"' add: scheduling file `file3'\'' for addition
'"${SPROG}"' add: scheduling file `file4'\'' for addition
'"${SPROG}"' add: scheduling file `file6'\'' for addition
'"${SPROG}"' add: scheduling file `file8'\'' for addition
'"${SPROG}"' add: scheduling file `file9'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add these files permanently'

	  dotest join4-3 "${testcvs} -q commit -m add" \
"$CVSROOT_DIRNAME/first-dir/file3,v  <--  file3
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file6,v  <--  file6
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file8,v  <--  file8
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file9,v  <--  file9
initial revision: 1\.1"

	  # Make a branch.
	  dotest join4-4 "${testcvs} -q tag -b branch ." \
'T file3
T file4
T file6
T file8
T file9'

	  # Add file10
	  echo 'first revision of file10' > file10
	  dotest join4-7a "${testcvs} add file10" \
"${SPROG}"' add: scheduling file `file10'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  dotest join4-7b "${testcvs} -q ci -mx ." \
"$CVSROOT_DIRNAME/first-dir/file10,v  <--  file10
initial revision: 1\.1"

	  # Add file2 and file7, modify file4, and remove
	  # file6, file8, file9, and file10.
	  echo 'first revision of file2' > file2
	  echo 'second revision of file4' > file4
	  echo 'first revision of file7' > file7
	  rm file6 file8 file9 file10
	  dotest join4-5 "${testcvs} add file2 file7" \
"${SPROG}"' add: scheduling file `file2'\'' for addition
'"${SPROG}"' add: scheduling file `file7'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add these files permanently'
	  dotest join4-6 "${testcvs} rm file6 file8 file9 file10" \
"${SPROG}"' remove: scheduling `file6'\'' for removal
'"${SPROG}"' remove: scheduling `file8'\'' for removal
'"${SPROG}"' remove: scheduling `file9'\'' for removal
'"${SPROG}"' remove: scheduling `file10'\'' for removal
'"${SPROG}"' remove: use .'"${SPROG}"' commit. to remove these files permanently'

	  # Check out the branch.
	  cd ../..
	  mkdir 2
	  cd 2
	  dotest join4-8 "${testcvs} -q co -r branch first-dir" \
'U first-dir/file3
U first-dir/file4
U first-dir/file6
U first-dir/file8
U first-dir/file9'

	  cd first-dir

	  # Modify the files on the branch, so that T1 is not an
	  # ancestor of the main line, and add file5
	  echo 'first branch revision of file3' > file3
	  echo 'first branch revision of file4' > file4
	  echo 'first branch revision of file5' > file5
	  echo 'first branch revision of file6' > file6
	  echo 'first branch revision of file9' > file9
	  dotest join4-9 "${testcvs} add file5" \
"${SPROG}"' add: scheduling file `file5'\'' for addition on branch `branch'\''
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  dotest join4-10 "${testcvs} -q ci -mx ." \
"$CVSROOT_DIRNAME/first-dir/file3,v  <--  file3
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/Attic/file5,v  <--  file5
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file6,v  <--  file6
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file9,v  <--  file9
new revision: 1\.1\.2\.1; previous revision: 1\.1"

	  # Tag the current revisions on the branch.
	  dotest join4-11 "${testcvs} -q tag T1 ." \
'T file3
T file4
T file5
T file6
T file8
T file9'

	  # Add file1 and file2, modify file9, and remove the other files.
	  echo 'first branch revision of file1' > file1
	  echo 'first branch revision of file2' > file2
	  echo 'second branch revision of file9' > file9
	  rm file3 file4 file5 file6
	  dotest join4-12 "${testcvs} add file1 file2" \
"${SPROG}"' add: scheduling file `file1'\'' for addition on branch `branch'\''
'"${SPROG}"' add: scheduling file `file2'\'' for addition on branch `branch'\''
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add these files permanently'
	  dotest join4-13 "${testcvs} rm file3 file4 file5 file6" \
"${SPROG}"' remove: scheduling `file3'\'' for removal
'"${SPROG}"' remove: scheduling `file4'\'' for removal
'"${SPROG}"' remove: scheduling `file5'\'' for removal
'"${SPROG}"' remove: scheduling `file6'\'' for removal
'"${SPROG}"' remove: use .'"${SPROG}"' commit. to remove these files permanently'
	  dotest join4-14 "${testcvs} -q ci -mx ." \
"$CVSROOT_DIRNAME/first-dir/Attic/file1,v  <--  file1
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/Attic/file2,v  <--  file2
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file3,v  <--  file3
new revision: delete; previous revision: 1\.1\.2\.1
$CVSROOT_DIRNAME/first-dir/file4,v  <--  file4
new revision: delete; previous revision: 1\.1\.2\.1
$CVSROOT_DIRNAME/first-dir/Attic/file5,v  <--  file5
new revision: delete; previous revision: 1\.1\.2\.1
$CVSROOT_DIRNAME/first-dir/file6,v  <--  file6
new revision: delete; previous revision: 1\.1\.2\.1
$CVSROOT_DIRNAME/first-dir/file9,v  <--  file9
new revision: 1\.1\.2\.2; previous revision: 1\.1\.2\.1"

	  # Tag the current revisions on the branch.
	  dotest join4-15 "${testcvs} -q tag T2 ." \
'T file1
T file2
T file8
T file9'

	  # Modify file4 locally, and do an update with a merge.
	  cd ../../1/first-dir
	  echo 'third revision of file4' > file4
	  dotest join4-18 "${testcvs} -q update -jT1 -jT2 ." \
"U file1
R file10
A file2
${SPROG} update: file file2 exists, but has been added in revision T2
${SPROG} update: scheduling \`file3' for removal
M file4
${SPROG} update: file file4 is locally modified, but has been removed in revision T2
R file6
A file7
R file8
R file9
${SPROG} update: file file9 does not exist, but is present in revision T2"

	  # Verify that the right changes have been scheduled.
	  dotest join4-19 "${testcvs} -q update" \
'A file1
R file10
A file2
R file3
M file4
R file6
A file7
R file8
R file9'

	  dokeep
	  cd ../..
	  rm -r 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	join5)
	  # This test verifies that CVS can handle filenames starting with a
	  # dash (`-') properly.  What used to happen was that CVS handled it
	  # just fine, until it went to pass them as arguments to the diff
	  # library, at which point it neglected to pass `--' before the file
	  # list, causing the diff library to attempt to interpret the file
	  # name as an argument.
	  mkdir join5; cd join5
	  mkdir 1; cd 1
	  dotest join5-init-1 "${testcvs} -Q co -l ."
	  mkdir join5
	  dotest join5-init-2 "${testcvs} -Q add join5"
	  cd join5
	  echo "there once was a file from harrisburg" >-file
	  echo "who's existance it seems was quiteabsurd" >>-file
	  dotest join5-init-3 "${testcvs} -Q add -- -file"
	  dotest join5-init-4 "${testcvs} -q ci -minitial" \
"$CVSROOT_DIRNAME/join5/-file,v  <--  -file
initial revision: 1\.1"
	  cd ../..

	  mkdir 2; cd 2
	  dotest join5-init-5 "${testcvs} -Q co join5"
	  cd join5
	  echo "it tested for free" >>-file
	  echo "when paid it should be" >>-file
	  dotest join5-init-4 "${testcvs} -q ci -msecond" \
"$CVSROOT_DIRNAME/join5/-file,v  <--  -file
new revision: 1\.2; previous revision: 1\.1"
	  cd ../..

	  cd 1/join5
	  echo "but maybe it could charge bytheword" >>-file
	  # This is the test that used to spew complaints from diff3:
	  dotest join5 "${testcvs} up" \
"${SPROG} update: Updating \.
RCS file: ${CVSROOT_DIRNAME}/join5/-file,v
retrieving revision 1\.1
retrieving revision 1\.2
Merging differences between 1\.1 and 1\.2 into -file
rcsmerge: warning: conflicts during merge
${SPROG} update: conflicts found in -file
C -file"

	  dokeep
	  cd ../../..
	  rm -r join5
	  modify_repo rm -rf $CVSROOT_DIRNAME/join5
	  ;;



        join6)
	  mkdir join6; cd join6
          mkdir 1; cd 1
	  dotest join6-init-1 "${testcvs} -Q co -l ."
	  mkdir join6
	  dotest join6-init-2 "${testcvs} -Q add join6"
	  cd join6
          echo aaa >temp.txt
	  echo bbb >>temp.txt
	  echo ccc >>temp.txt
	  dotest join6-1 "${testcvs} -Q add temp.txt"
	  dotest join6-2 "${testcvs} -q commit -minitial temp.txt" \
"$CVSROOT_DIRNAME/join6/temp\.txt,v  <--  temp\.txt
initial revision: 1\.1"
	  cp temp.txt temp2.txt
	  echo ddd >>temp.txt
	  dotest join6-3 "${testcvs} -q commit -madd temp.txt" \
"$CVSROOT_DIRNAME/join6/temp.txt,v  <--  temp\.txt
new revision: 1\.2; previous revision: 1\.1"

	  # The case where the merge target is up-to-date and its base revision
	  # matches the second argument to -j: CVS doesn't bother attempting
	  # the merge since it already knows that the target contains the
	  # change.
	  dotest join6-3.3 "${testcvs} update -j1.1 -j1.2 temp.txt" \
"temp\.txt already contains the differences between 1\.1 and 1\.2"
	  dotest join6-3.4 "${testcvs} diff temp.txt" ""

	  # The case where the merge target is modified but already contains
	  # the change.
	  echo bbb >temp.txt
	  echo ccc >>temp.txt
	  echo ddd >>temp.txt
	  dotest join6-3.5 "${testcvs} update -j1.1 -j1.2 temp.txt" \
"M temp\.txt
RCS file: ${CVSROOT_DIRNAME}/join6/temp\.txt,v
retrieving revision 1\.1
retrieving revision 1\.2
Merging differences between 1\.1 and 1\.2 into temp\.txt
temp\.txt already contains the differences between 1\.1 and 1\.2"
	  dotest_fail join6-3.6 "${testcvs} diff temp.txt" \
"Index: temp\.txt
===================================================================
RCS file: ${CVSROOT_DIRNAME}/join6/temp\.txt,v
retrieving revision 1\.2
diff -r1\.2 temp.txt
1d0
< aaa"

	  cp temp2.txt temp.txt
	  dotest_fail join6-4 "${testcvs} diff temp.txt" \
"Index: temp.txt
===================================================================
RCS file: ${CVSROOT_DIRNAME}/join6/temp\.txt,v
retrieving revision 1\.2
diff -r1\.2 temp\.txt
4d3
< ddd"

	  dotest join6-5 "${testcvs} update -j1.1 -j1.2 temp.txt" \
"M temp\.txt
RCS file: ${CVSROOT_DIRNAME}/join6/temp\.txt,v
retrieving revision 1\.1
retrieving revision 1\.2
Merging differences between 1\.1 and 1\.2 into temp\.txt"
	  dotest join6-6 "${testcvs} diff temp.txt" ""
	  mv temp.txt temp3.txt
	  dotest join6-7 "sed 's/ddd/dddd/' < temp3.txt > temp.txt" ""
	  dotest join6-8 "${testcvs} update -j1.1 -j1.2 temp.txt" \
"M temp\.txt
RCS file: ${CVSROOT_DIRNAME}/join6/temp\.txt,v
retrieving revision 1\.1
retrieving revision 1\.2
Merging differences between 1\.1 and 1\.2 into temp\.txt
rcsmerge: warning: conflicts during merge"
	  dotest_fail join6-9 "${testcvs} diff temp.txt" \
"Index: temp\.txt
===================================================================
RCS file: ${CVSROOT_DIRNAME}/join6/temp.txt,v
retrieving revision 1\.2
diff -r1\.2 temp\.txt
3a4,6
> <<<<<<< temp\.txt
> dddd
> =======
4a8
> >>>>>>> 1\.2"
	  cp temp2.txt temp.txt
	  dotest join6-10 "${testcvs} -q ci -m del temp.txt" \
"$CVSROOT_DIRNAME/join6/temp.txt,v  <--  temp\.txt
new revision: 1\.3; previous revision: 1\.2"
          cp temp3.txt temp.txt
	  dotest_fail join6-11 "${testcvs} diff temp.txt" \
"Index: temp\.txt
===================================================================
RCS file: ${CVSROOT_DIRNAME}/join6/temp.txt,v
retrieving revision 1\.3
diff -r1\.3 temp\.txt
3a4
> ddd"
	  dotest join6-12 "${testcvs} update -j1.2 -j1.3 temp.txt" \
"M temp\.txt
RCS file: ${CVSROOT_DIRNAME}/join6/temp\.txt,v
retrieving revision 1\.2
retrieving revision 1\.3
Merging differences between 1\.2 and 1\.3 into temp\.txt"
	  dotest join6-13 "${testcvs} diff temp.txt" ""

	  # The case where the merge target wasn't created until after the
	  # first tag was applied
	  rm temp2.txt temp3.txt
	  dotest join6-20 "${testcvs} -q tag -r1.1 t1" \
"T temp.txt"
	  echo xxx >temp2.txt
	  dotest join6-21 "${testcvs} -Q add temp2.txt"
	  dotest join6-22 "${testcvs} -q ci -m." \
"$CVSROOT_DIRNAME/join6/temp2\.txt,v  <--  temp2\.txt
initial revision: 1\.1"
	  dotest join6-23 "${testcvs} -q tag t2" \
"T temp.txt
T temp2.txt"
	  echo xxx >>temp.txt
	  dotest join6-24 "${testcvs} -q ci -m." \
"$CVSROOT_DIRNAME/join6/temp.txt,v  <--  temp\.txt
new revision: 1\.4; previous revision: 1\.3"
	  dotest join6-25 "${testcvs} -q up -jt1 -jt2" \
"RCS file: ${CVSROOT_DIRNAME}/join6/temp.txt,v
retrieving revision 1\.1
retrieving revision 1\.3
Merging differences between 1\.1 and 1\.3 into temp.txt
temp.txt already contains the differences between 1\.1 and 1\.3
temp2.txt already contains the differences between creation and 1\.1"

	  # Now for my next trick: delete the file, recreate it, and
	  # try to merge
	  dotest join6-30 "${testcvs} -q rm -f temp2.txt" \
"${SPROG} remove: use .${SPROG} commit. to remove this file permanently"
	  dotest join6-31 "${testcvs} -q ci -m. temp2.txt" \
"$CVSROOT_DIRNAME/join6/temp2\.txt,v  <--  temp2\.txt
new revision: delete; previous revision: 1\.1"
	  echo new >temp2.txt
	  # FIXCVS: Local and remote really shouldn't be different and there
	  # really shouldn't be two different status lines for temp2.txt
	  if $remote; then
	    dotest_fail join6-32 "${testcvs} -q up -jt1 -jt2" \
"? temp2\.txt
RCS file: ${CVSROOT_DIRNAME}/join6/temp.txt,v
retrieving revision 1\.1
retrieving revision 1\.3
Merging differences between 1\.1 and 1\.3 into temp.txt
temp.txt already contains the differences between 1\.1 and 1\.3
$CPROG update: move away .\./temp2\.txt.; it is in the way
C temp2\.txt"
	  else
	    dotest join6-32 "${testcvs} -q up -jt1 -jt2" \
"RCS file: ${CVSROOT_DIRNAME}/join6/temp.txt,v
retrieving revision 1\.1
retrieving revision 1\.3
Merging differences between 1\.1 and 1\.3 into temp.txt
temp.txt already contains the differences between 1\.1 and 1\.3
${SPROG} update: use .${SPROG} add. to create an entry for .temp2\.txt.
U temp2\.txt
? temp2\.txt"
	  fi

	  dokeep
	  cd ../../..
	  rm -r join6
	  modify_repo rm -rf $CVSROOT_DIRNAME/join6
	  ;;



	join7)
	  # This test deals with joins that happen with the -n switch
	  mkdir join7; cd join7
	  mkdir impdir; cd impdir
          echo aaa >temp.txt
	  echo bbb >>temp.txt
	  echo ccc >>temp.txt
	  dotest join7-1 \
"${testcvs} -Q import -minitial join7 vendor vers-1" \
""
	  cd ..
	  dotest join7-2 "${testcvs} -Q co join7" ""
	  cd join7
	  echo ddd >> temp.txt
	  dotest join7-3 "${testcvs} -Q ci -madded-line temp.txt" ""
	  cd ../impdir
	  echo aaaa >temp.txt
	  echo bbbb >>temp.txt
	  echo ccc >>temp.txt
	  echo eee >>temp.txt
	  dotest join7-4 \
"${testcvs} -Q import -minitial join7 vendor vers-2" \
""
	  cd ../join7
	  dotest join7-5 \
"${testcvs} -n update -jvers-1 -jvers-2 temp.txt" \
"RCS file: $CVSROOT_DIRNAME/join7/temp.txt,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.1\.1\.2
Merging differences between 1\.1\.1\.1 and 1\.1\.1\.2 into temp.txt
rcsmerge: warning: conflicts during merge"
	  touch temp.txt
	  dotest join7-6 "${testcvs} -n update -jvers-1 -jvers-2 temp.txt" \
"RCS file: $CVSROOT_DIRNAME/join7/temp.txt,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.1\.1\.2
Merging differences between 1\.1\.1\.1 and 1\.1\.1\.2 into temp.txt
rcsmerge: warning: conflicts during merge" \
"RCS file: $CVSROOT_DIRNAME/join7/temp.txt,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.1\.1\.2
Merging differences between 1\.1\.1\.1 and 1\.1\.1\.2 into temp.txt
rcsmerge: warning: conflicts during merge"

	  dokeep
	  cd ../..
	  rm -r join7
	  modify_repo rm -rf $CVSROOT_DIRNAME/join7
	  ;;



	join-readonly-conflict)
	  # Previously, only tests 1 & 11 were being tested.  I added the
	  # intermediate dotest's to try and diagnose a different failure
	  #
	  # Demonstrate that cvs-1.9.29 can fail on 2nd and subsequent
	  # conflict-evoking join attempts.
	  # Even with that version of CVS, This test failed only in
	  # client-server mode, and would have been noticed in normal
	  # operation only for files that were read-only (either due to
	  # use of cvs' global -r option, setting the CVSREAD envvar,
	  # or use of watch lists).
	  mkdir join-readonly-conflict; cd join-readonly-conflict
	  dotest join-readonly-conflict-1 "$testcvs -q co -l ." ''
	  module=join-readonly-conflict
	  mkdir $module
	  $testcvs -q add $module >>$LOGFILE 2>&1
	  cd $module

	  file=m
	  echo trunk > $file
	  dotest join-readonly-conflict-2 "$testcvs -Q add $file" ''

	  dotest join-readonly-conflict-3 "$testcvs -q ci -m . $file" \
"$CVSROOT_DIRNAME/$module/$file,v  <--  $file
initial revision: 1\.1"

	  dotest join-readonly-conflict-4 "$testcvs tag -b B $file" "T $file"
	  dotest join-readonly-conflict-5 "$testcvs -q update -rB $file" ''
	  echo branch B > $file
	  dotest join-readonly-conflict-6 "$testcvs -q ci -m . $file" \
"$CVSROOT_DIRNAME/$module/$file,v  <--  $file
new revision: 1\.1\.2\.1; previous revision: 1\.1"

	  rm $file
	  dotest join-readonly-conflict-7 "$testcvs -Q update -A $file" ''
	  # Make sure $file is read-only.  This can happen more realistically
	  # via patch -- which could be used to apply a delta, yet would
	  # preserve a file's read-only permissions.
	  echo conflict > $file; chmod u-w $file
	  dotest join-readonly-conflict-8 "$testcvs update -r B $file" \
"RCS file: $CVSROOT_DIRNAME/$module/$file,v
retrieving revision 1\.1
retrieving revision 1\.1\.2\.1
Merging differences between 1\.1 and 1\.1\.2\.1 into $file
rcsmerge: warning: conflicts during merge
${SPROG} update: conflicts found in $file
C $file"

	  # restore to the trunk
	  rm -f $file
	  dotest join-readonly-conflict-9 "$testcvs -Q update -A $file" ''

	  # This one would fail because cvs couldn't open the existing
	  # (and read-only) .# file for writing.
	  echo conflict > $file

	  # verify that the backup file is not writable
	  if test -w ".#$file.1.1"; then
	    fail "join-readonly-conflict-10 : .#$file.1.1 is writable"
	  else
	    pass "join-readonly-conflict-10"
	  fi
	  dotest join-readonly-conflict-11 "$testcvs update -r B $file" \
"RCS file: $CVSROOT_DIRNAME/$module/$file,v
retrieving revision 1\.1
retrieving revision 1\.1\.2\.1
Merging differences between 1\.1 and 1\.1\.2\.1 into $file
rcsmerge: warning: conflicts during merge
${SPROG} update: conflicts found in $file
C m"

	  dokeep
	  cd ../..
	  rm -r join-readonly-conflict
	  modify_repo rm -rf $CVSROOT_DIRNAME/$module
	  ;;



	join-admin)
	  mkdir 1; cd 1
	  dotest join-admin-0-1 "$testcvs -q co -l ."
	  module=x
	  mkdir $module
	  dotest join-admin-0-2 "$testcvs -q add $module" \
"Directory $CVSROOT_DIRNAME/$module added to the repository"
	  cd $module

	  # Create a file so applying the first tag works.
	  echo foo > a
	  dotest join-admin-0-3 "$testcvs -Q add a" ''
	  dotest join-admin-0-4 "$testcvs -Q ci -m. a" ''

	  dotest join-admin-0-5 "$testcvs -Q tag -b B" ''
	  dotest join-admin-0-6 "$testcvs -Q tag -b M1" ''
	  echo '$''Id$' > b
	  dotest join-admin-0-7 "$testcvs -Q add b" ''
	  dotest join-admin-0-8 "$testcvs -Q ci -m. b" ''
	  dotest join-admin-0-9 "$testcvs -Q tag -b M2" ''

	  dotest join-admin-0-10 "$testcvs -Q update -r B" ''
	  dotest join-admin-0-11 "$testcvs -Q update -kk -jM1 -jM2" ''
	  dotest join-admin-0-12 "$testcvs -Q ci -m. b" ''

	  dotest join-admin-0-13 "$testcvs -Q update -A" ''

	  # Verify that the -kk flag from the update did not
	  # propagate to the repository.
	  dotest join-admin-1 "$testcvs status b" \
"===================================================================
File: b                	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/x/b,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"

	  dokeep
	  cd ../..
	  rm -rf 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/$module
	  ;;



	join-admin-2)
	  # Show that when a merge (via update -kk -jtag1 -jtag2) first
	  # removes a file, then modifies another containing an $Id...$ line,
	  # the resulting file contains the unexpanded `$Id.$' string, as
	  # -kk requires.
	  mkdir 1; cd 1
	  dotest join-admin-2-1 "$testcvs -q co -l ." ''
	  module=x
	  mkdir $module
	  dotest join-admin-2-2 "$testcvs -q add $module" \
"Directory ${CVSROOT_DIRNAME}/x added to the repository"
	  cd $module

	  # Create a file so applying the first tag works.
	  echo '$''Id$' > e0
	  cp e0 e
	  dotest join-admin-2-3 "$testcvs -Q add e"
	  dotest join-admin-2-4 "$testcvs -Q ci -m. e"

	  dotest join-admin-2-5 "$testcvs -Q tag -b T" '' "${QUESTION} e0"
	  dotest join-admin-2-6 "$testcvs -Q update -r T" '' "${QUESTION} e0"
	  cp e0 e
	  dotest join-admin-2-7 "$testcvs -Q ci -m. e"

	  dotest join-admin-2-8 "$testcvs -Q update -A" '' "${QUESTION} e0"
	  dotest join-admin-2-9 "$testcvs -Q tag -b M1" '' "${QUESTION} e0"

	  echo '$''Id$' > b
	  dotest join-admin-2-10 "$testcvs -Q add b" ''
	  cp e0 e
	  dotest join-admin-2-11 "$testcvs -Q ci -m. b e"

	  dotest join-admin-2-12 "$testcvs -Q tag -b M2" '' "${QUESTION} e0"

	  dotest join-admin-2-13 "$testcvs -Q update -r T" '' "${QUESTION} e0"
	  dotest join-admin-2-14 "$testcvs update -kk -jM1 -jM2" \
"${SPROG} update: Updating .
U b
U e
RCS file: ${CVSROOT_DIRNAME}/x/e,v
retrieving revision 1\.1
retrieving revision 1\.2
Merging differences between 1\.1 and 1\.2 into e
e already contains the differences between 1\.1 and 1\.2
${QUESTION} e0" \
"${QUESTION} e0
${SPROG} update: Updating .
U b
U e
RCS file: ${CVSROOT_DIRNAME}/x/e,v
retrieving revision 1\.1
retrieving revision 1\.2
Merging differences between 1\.1 and 1\.2 into e
e already contains the differences between 1\.1 and 1\.2"

	  # Verify that the $Id.$ string is not expanded.
	  dotest join-admin-2-15 "cat e" '$''Id$'

	  dokeep
	  cd ../..
	  rm -rf 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/$module
	  ;;



	join-rm)
	  # This first half of this test checks that a single-argument merge
	  # from a branch is capable of removing files.
	  #
	  # The second half verifies that an update to another location with an
	  # uncommitted removal will transfer the destination branch of the
	  # removal.

	  module=join-rm
	  mkdir $module; cd $module

	  dotest join-rm-init-1 "$testcvs -q co -l ." ''
	  mkdir $module
	  dotest join-rm-init-2 "$testcvs -q add $module" \
"Directory $CVSROOT_DIRNAME/$module added to the repository"
	  cd $module

	  # add some files.
	  touch a b c d e f g
	  dotest join-rm-init-3 "$testcvs -Q add a b c d e f g"
	  dotest join-rm-init-4 "$testcvs -Q ci -m add-em"
	  
	  # create the branch and update to it
	  dotest join-rm-init-5 "$testcvs -Q tag -b br"
	  dotest join-rm-init-6 "$testcvs -Q up -rbr"

	  # remove a few files from the branch
	  dotest join-rm-init-7 "$testcvs -Q rm -f b d g"
	  dotest join-rm-init-8 "$testcvs -Q ci -mrm"

	  # update to the trunk
	  dotest join-rm-init-9 "$testcvs -Q up -A"

	  # now for the test - try and merge the removals.
	  dotest join-rm-1 "$testcvs -q up -jbr" \
"$SPROG update: scheduling \`b' for removal
$SPROG update: scheduling \`d' for removal
$SPROG update: scheduling \`g' for removal"

	  # And make sure the merge took
	  dotest join-rm-2 "$testcvs -qn up" \
"R b
R d
R g"

	  dotest join-rm-3 "$testcvs -q ci -m 'save the merge'" \
"$CVSROOT_DIRNAME/join-rm/b,v  <--  b
new revision: delete; previous revision: 1\.1
$CVSROOT_DIRNAME/join-rm/d,v  <--  d
new revision: delete; previous revision: 1\.1
$CVSROOT_DIRNAME/join-rm/g,v  <--  g
new revision: delete; previous revision: 1\.1"

	  # and verify that it was the head revision which was removed.
	  dotest join-rm-4 "$testcvs -q log b"  "
RCS file: $CVSROOT_DIRNAME/join-rm/Attic/b,v
Working file: b
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	br: 1\.1\.0\.2
keyword substitution: kv
total revisions: 3;	selected revisions: 3
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: $username;  state: dead;  lines: ${PLUS}0 -0;  commitid: ${commitid};
save the merge
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: $username;  state: Exp;  commitid: ${commitid};
branches:  1.1.2;
add-em
----------------------------
revision 1\.1\.2\.1
date: ${ISO8601DATE};  author: $username;  state: dead;  lines: ${PLUS}0 -0;  commitid: ${commitid};
rm
============================================================================="

	  # go back to the branch to set up for the second set of tests
	  dotest join-rm-init-10 "$testcvs -Q up -rbr"
	  dotest join-rm-init-11 "$testcvs -Q rm -f a"
	  dotest join-rm-init-12 "$testcvs -Q ci -m rma"

	  # now the test: update to the trunk
	  #
	  # FIXCVS: This update should merge the removal to the trunk.  It does
	  # not.
	  dotest join-rm-5 "$testcvs -q up -A" "U a"

	  # and verify that there is no sticky tag
	  dotest join-rm-6 "$testcvs status a" \
"===================================================================
File: a                	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	$CVSROOT_DIRNAME/join-rm/a,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"

	  dokeep
	  cd ../..
	  modify_repo rm -rf $CVSROOT_DIRNAME/$module
	  rm -r $module
	  ;;



	new) # look for stray "no longer pertinent" messages.
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  dotest new-init-1 "$testcvs -Q co first-dir"

	  cd first-dir
	  touch a

	  dotest new-1 "$testcvs -Q add a"

	  dotest new-2 "$testcvs -Q ci -m added"
	  rm a

	  dotest new-3 "$testcvs -Q rm a"
	  dotest new-4 "$testcvs -Q ci -m removed"
	  dotest new-5 "$testcvs -Q update -A"
	  dotest new-6 "$testcvs -Q update -rHEAD"

	  dokeep
	  cd ..
	  rm -r first-dir
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	newb)
	  # Test removing a file on a branch and then checking it out.

	  # We call this "newb" only because it, like the "new" tests,
	  # has something to do with "no longer pertinent" messages.
	  # Not necessarily the most brilliant nomenclature.

	  # Create file 'a'.
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  dotest newb-123a "${testcvs} -q co first-dir" ''
	  cd first-dir
	  touch a
	  dotest newb-123b "${testcvs} add a" \
"${SPROG} add: scheduling file .a. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest newb-123c "${testcvs} -q ci -m added" \
"$CVSROOT_DIRNAME/first-dir/a,v  <--  a
initial revision: 1\.1"

	  # Make a branch.
	  dotest newb-123d "${testcvs} -q tag -b branch" "T a"

	  # Check out the branch.
	  cd ..
	  rm -r first-dir
	  mkdir 1
	  cd 1
	  dotest newb-123e "${testcvs} -q co -r branch first-dir" \
"U first-dir/a"

	  # Remove 'a' on another copy of the branch.
	  cd ..
	  mkdir 2
	  cd 2
	  dotest newb-123f "${testcvs} -q co -r branch first-dir" \
"U first-dir/a"
	  cd first-dir
	  rm a
	  dotest newb-123g "${testcvs} rm a" \
"${SPROG} remove: scheduling .a. for removal
${SPROG} remove: use .${SPROG} commit. to remove this file permanently"
	  dotest newb-123h "${testcvs} -q ci -m removed" \
"$CVSROOT_DIRNAME/first-dir/a,v  <--  a
new revision: delete; previous revision: 1\.1"

	  # Check out the file on the branch.  This should report
	  # that the file is not pertinent, but it should not
	  # say anything else.
	  cd ..
	  rm -r first-dir
	  dotest newb-123i "${testcvs} -q co -r branch first-dir/a" \
"${SPROG} checkout: warning: \`first-dir/a' is not (any longer) pertinent"

	  # Update the other copy, and make sure that a is removed.
	  cd ../1/first-dir
	  # "Entry Invalid" is a rather strange output here.  Something like
	  # "Removed in Repository" would make more sense.
	  dotest newb-123j0 "${testcvs} status a" \
"${SPROG} status: \`a' is no longer in the repository
===================================================================
File: a                	Status: Entry Invalid

   Working revision:	1\.1.*
   Repository revision:	1\.1\.2\.1	${CVSROOT_DIRNAME}/first-dir/a,v
   Commit Identifier:	${commitid}
   Sticky Tag:		branch (branch: 1\.1\.2)
   Sticky Date:		(none)
   Sticky Options:	(none)${DOTSTAR}"
	  dotest newb-123j "${testcvs} -q update" \
"${SPROG} update: \`a' is no longer in the repository"

	  if test -f a; then
	    fail newb-123k
	  else
	    pass newb-123k
	  fi

	  dokeep
	  cd ../..
	  rm -r 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	conflicts)
		modify_repo mkdir $CVSROOT_DIRNAME/first-dir

		mkdir 1
		cd 1

		dotest conflicts-124 "${testcvs} -q co first-dir" ''

		cd first-dir
		touch a

		dotest conflicts-125 "${testcvs} add a" \
"${SPROG} add: scheduling file .a. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
		dotest conflicts-126 "${testcvs} -q ci -m added" \
"$CVSROOT_DIRNAME/first-dir/a,v  <--  a
initial revision: 1\.1"

		cd ../..
		mkdir 2
		cd 2

		dotest conflicts-126.5 "${testcvs} co -p first-dir" \
"${SPROG} checkout: Updating first-dir
===================================================================
Checking out first-dir/a
RCS:  ${CVSROOT_DIRNAME}/first-dir/a,v
VERS: 1\.1
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*"
		dotest conflicts-127 "${testcvs} -Q co first-dir" ''
		cd first-dir
		dotest conflicts-127a "test -f a" ''

		cd ../../1/first-dir
		echo add a line >>a
		mkdir dir1
		dotest conflicts-127b "${testcvs} add dir1" \
"Directory ${CVSROOT_DIRNAME}/first-dir/dir1 added to the repository"
		dotest conflicts-128 "${testcvs} -q ci -m changed" \
"$CVSROOT_DIRNAME/first-dir/a,v  <--  a
new revision: 1\.2; previous revision: 1\.1"
		cd ../..

		# Similar to conflicts-126.5, but now the file has nonempty
		# contents.
		mkdir 3
		cd 3
		dotest conflicts-128.5 "${testcvs} co -p -l first-dir" \
"${SPROG} checkout: Updating first-dir
===================================================================
Checking out first-dir/a
RCS:  ${CVSROOT_DIRNAME}/first-dir/a,v
VERS: 1\.2
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
add a line"
		cd ..
		rmdir 3

		# Now go over the to the other working directory and
		# start testing conflicts
		cd 2/first-dir
		echo add a conflicting line >>a
		dotest_fail conflicts-129 "${testcvs} -q ci -m changed" \
"${SPROG}"' commit: Up-to-date check failed for `a'\''
'"${SPROG}"' \[commit aborted\]: correct above errors first!'
		mkdir dir1
		mkdir sdir
		dotest conflicts-status-0 "${testcvs} status a" \
"===================================================================
File: a                	Status: Needs Merge

   Working revision:	1\.1.*
   Repository revision:	1\.2	${CVSROOT_DIRNAME}/first-dir/a,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
		dotest conflicts-129a "${testcvs} -nq update a" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/a,v
retrieving revision 1\.1
retrieving revision 1\.2
Merging differences between 1\.1 and 1\.2 into a
rcsmerge: warning: conflicts during merge
${SPROG} update: conflicts found in a
C a"
		dotest conflicts-130 "${testcvs} -q update" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/a,v
retrieving revision 1\.1
retrieving revision 1\.2
Merging differences between 1\.1 and 1\.2 into a
rcsmerge: warning: conflicts during merge
${SPROG} update: conflicts found in a
C a
${QUESTION} dir1
${QUESTION} sdir" \
"${QUESTION} dir1
${QUESTION} sdir
RCS file: ${CVSROOT_DIRNAME}/first-dir/a,v
retrieving revision 1\.1
retrieving revision 1\.2
Merging differences between 1\.1 and 1\.2 into a
rcsmerge: warning: conflicts during merge
${SPROG} update: conflicts found in a
C a"
		rmdir dir1 sdir

		dotest conflicts-status-1 "${testcvs} status a" \
"===================================================================
File: a                	Status: Unresolved Conflict

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT_DIRNAME}/first-dir/a,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
		dotest_fail conflicts-131 "${testcvs} -q ci -m try" \
"${SPROG} commit: file .a. had a conflict and has not been modified
${SPROG} \[commit aborted\]: correct above errors first!"

		# Try to check in the file with the conflict markers in it.
		# Make sure we detect any one of the three conflict markers
		mv a aa
		grep '^<<<<<<<' aa >a
		dotest conflicts-status-2 "${testcvs} -nq ci -m try a" \
"${SPROG} commit: warning: file .a. seems to still contain conflict indicators"

		grep '^=======' aa >a
		dotest conflicts-status-3 "${testcvs} -nq ci -m try a" \
"${SPROG} commit: warning: file .a. seems to still contain conflict indicators"

		grep '^>>>>>>>' aa >a
		dotest conflicts-status-4 "${testcvs} -qn ci -m try a" \
"${SPROG} commit: warning: file .a. seems to still contain conflict indicators"

		mv aa a
		echo lame attempt at resolving it >>a
		dotest conflicts-status-5 "${testcvs} status a" \
"===================================================================
File: a                	Status: File had conflicts on merge

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT_DIRNAME}/first-dir/a,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
		dotest conflicts-132 "$testcvs -q ci -m try" \
"$SPROG commit: warning: file .a. seems to still contain conflict indicators
$CVSROOT_DIRNAME/first-dir/a,v  <--  a
new revision: 1\.3; previous revision: 1\.2"

		# OK, the user saw the warning (good user), and now
		# resolves it for real.
		echo resolve conflict >a
		dotest conflicts-status-6 "${testcvs} status a" \
"===================================================================
File: a                	Status: Locally Modified

   Working revision:	1\.3.*
   Repository revision:	1\.3	${CVSROOT_DIRNAME}/first-dir/a,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
		dotest conflicts-133 "${testcvs} -q ci -m resolved" \
"$CVSROOT_DIRNAME/first-dir/a,v  <--  a
new revision: 1\.4; previous revision: 1\.3"
		dotest conflicts-status-7 "${testcvs} status a" \
"===================================================================
File: a                	Status: Up-to-date

   Working revision:	1\.4.*
   Repository revision:	1\.4	${CVSROOT_DIRNAME}/first-dir/a,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"

		# Now test that we can add a file in one working directory
		# and have an update in another get it.
		cd ../../1/first-dir
		echo abc >abc
		if ${testcvs} add abc >>${LOGFILE} 2>&1; then
		    pass 134
		else
		    fail 134
		fi
		if ${testcvs} ci -m 'add abc' abc >>${LOGFILE} 2>&1; then
		    pass 135
		else
		    fail 135
		fi
		cd ../../2
		mkdir first-dir/dir1 first-dir/sdir
		dotest conflicts-136 "${testcvs} -q update first-dir" \
'[UP] first-dir/abc
'"${QUESTION}"' first-dir/dir1
'"${QUESTION}"' first-dir/sdir' \
''"${QUESTION}"' first-dir/dir1
'"${QUESTION}"' first-dir/sdir
[UP] first-dir/abc'
		dotest conflicts-137 'test -f first-dir/abc' ''
		rmdir first-dir/dir1 first-dir/sdir

		# Now test something similar, but in which the parent directory
		# (not the directory in question) has the Entries.Static flag
		# set.
		cd ../1/first-dir
		mkdir subdir
		dotest conflicts-138 "${testcvs} add subdir" "${DOTSTAR}"
		cd ../..
		mkdir 3
		cd 3
		dotest conflicts-139 \
"${testcvs} -q co first-dir/abc first-dir/subdir" "${DOTSTAR}"
		cd ../1/first-dir/subdir
		echo sss >sss
		dotest conflicts-140 "${testcvs} add sss" "${DOTSTAR}"
		dotest conflicts-140a "${testcvs} ci -m adding sss" \
"${DOTSTAR}"
		cd ../../../3/first-dir
		dotest conflicts-141 "${testcvs} -q update" "${DOTSTAR}"
		dotest conflicts-142 "test -f subdir/sss"

		dokeep
		cd ../..
		rm -r 1 2 3
		modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
		restore_adm
		;;



	conflicts2)
	  # More conflicts tests; separate from conflicts to keep each
	  # test a manageable size.
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir

	  mkdir 1
	  cd 1

	  dotest conflicts2-142a1 "${testcvs} -q co first-dir" ''

	  cd first-dir
	  touch a abc

	  dotest conflicts2-142a2 "${testcvs} add a abc" \
"${SPROG} add: scheduling file .a. for addition
${SPROG} add: scheduling file .abc. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  dotest conflicts2-142a3 "${testcvs} -q ci -m added" \
"$CVSROOT_DIRNAME/first-dir/a,v  <--  a
initial revision: 1\.1
${CVSROOT_DIRNAME}/first-dir/abc,v  <--  abc
initial revision: 1\.1"

	  cd ../..
	  mkdir 2
	  cd 2

	  dotest conflicts2-142a4 "${testcvs} -q co first-dir" 'U first-dir/a
U first-dir/abc'
	  cd ..

	  # BEGIN TESTS USING THE FILE A
	  # FIXME: would be cleaner to separate them out into their own
	  # tests; conflicts2 is getting long.
	  # Now test that if one person modifies and commits a
	  # file and a second person removes it, it is a
	  # conflict
	  cd 1/first-dir
	  echo modify a >>a
	  dotest conflicts2-142b2 "${testcvs} -q ci -m modify-a" \
"$CVSROOT_DIRNAME/first-dir/a,v  <--  a
new revision: 1\.2; previous revision: 1\.1"
	  cd ../../2/first-dir
	  rm a
	  dotest conflicts2-142b3 "${testcvs} rm a" \
"${SPROG} remove: scheduling .a. for removal
${SPROG} remove: use .${SPROG} commit. to remove this file permanently"
	  dotest_fail conflicts2-142b4 "${testcvs} -q update" \
"${SPROG} update: conflict: removed \`a' was modified by second party
C a"
	  # Resolve the conflict by deciding not to remove the file
	  # after all.
	  dotest_sort conflicts2-142b5 "$testcvs add a" "U a
${SPROG} add: \`a', version 1\.1, resurrected"
	  dotest conflicts2-142b5b1 "$testcvs status a" \
"===================================================================
File: a                	Status: Needs Patch

   Working revision:	1\.1.*
   Repository revision:	1\.2	$CVSROOT_DIRNAME/first-dir/a,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest conflicts2-142b6 "$testcvs -q update" 'U a'

	  # Now one level up.
	  cd ..
	  dotest conflicts2-142b7 "${testcvs} rm -f first-dir/a" \
"${SPROG} remove: scheduling \`first-dir/a' for removal
${SPROG} remove: use \`${SPROG} commit' to remove this file permanently"

	  if $remote; then
	    # Haven't investigated this one.
	    dotest_fail conflicts2-142b8r "$testcvs add first-dir/a" \
"${CPROG} add: in directory \`\.':
${CPROG} \[add aborted\]: there is no version here; do \`${CPROG} checkout' first"
	    cd first-dir
	  else
	    dotest conflicts2-142b8 "${testcvs} add first-dir/a" \
"U first-dir/a
$SPROG add: \`first-dir/a', version 1\.2, resurrected"
	    cd first-dir
	    # Now recover from the damage that the 142b8 test did.
	    dotest conflicts2-142b9 "${testcvs} rm -f a" \
"${SPROG} remove: scheduling \`a' for removal
${SPROG} remove: use \`${SPROG} commit' to remove this file permanently"
	  fi

	  # As before, 1.2 instead of 1.1 is a bug.
	  dotest_sort conflicts2-142b10 "$testcvs add a" "U a
${SPROG} add: \`a', version 1\.2, resurrected"
	  # As with conflicts2-142b6, check that things are normal again.
	  dotest conflicts2-142b11 "${testcvs} -q update" ''
	  cd ../..
	  # END TESTS USING THE FILE A

	  # Now test that if one person removes a file and
	  # commits it, and a second person removes it, is it
	  # not a conflict.
	  cd 1/first-dir
	  rm abc
	  dotest conflicts2-142c0 "${testcvs} rm abc" \
"${SPROG} remove: scheduling \`abc' for removal
${SPROG} remove: use \`${SPROG} commit' to remove this file permanently"
	  dotest conflicts2-142c1 "${testcvs} -q ci -m remove-abc" \
"$CVSROOT_DIRNAME/first-dir/abc,v  <--  abc
new revision: delete; previous revision: 1\.1"
	  cd ../../2/first-dir
	  rm abc
	  dotest conflicts2-142c2 "${testcvs} rm abc" \
"${SPROG} remove: scheduling \`abc' for removal
${SPROG} remove: use \`${SPROG} commit' to remove this file permanently"
	  dotest conflicts2-142c3 "${testcvs} update" \
"${SPROG} update: Updating \."
	  cd ../..

	  # conflicts2-142d*: test that if one party adds a file, and another
	  # party has a file of the same name, cvs notices
	  cd 1/first-dir
	  touch aa.c
	  echo 'contents unchanged' >same.c
	  dotest conflicts2-142d0 "${testcvs} add aa.c same.c" \
"${SPROG} add: scheduling file .aa\.c. for addition
${SPROG} add: scheduling file .same\.c. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  dotest conflicts2-142d1 "${testcvs} -q ci -m added" \
"$CVSROOT_DIRNAME/first-dir/aa\.c,v  <--  aa\.c
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/same\.c,v  <--  same\.c
initial revision: 1\.1"

	  # Test the case where the second user manages the add before the
	  # first commits
	  touch bb.c
	  dotest conflicts2-142d1a "$testcvs add bb.c" \
"$SPROG add: scheduling file .bb\.c. for addition
$SPROG add: use .$SPROG commit. to add this file permanently"
	  cd ../../2/first-dir
	  echo "don't you dare obliterate this text" >bb.c
	  dotest conflicts2-142d1b "$testcvs add bb.c" \
"$SPROG add: scheduling file .bb\.c. for addition
$SPROG add: use .$SPROG commit. to add this file permanently"
	  cd ../../1/first-dir
	  dotest conflicts2-142d1c "$testcvs -q ci -m added" \
"$CVSROOT_DIRNAME/first-dir/bb\.c,v  <--  bb\.c
initial revision: 1\.1"

	  cd ../../2/first-dir
	  echo "don't you dare obliterate this text either" >aa.c
	  echo 'contents unchanged' >same.c
	  # Note the discrepancy between local and remote in the handling
	  # of same.c.  I kind
	  # of suspect that the local CVS behavior is the more useful one
	  # although I do sort of wonder whether we should make people run
	  # cvs add just to get them in that habit (also, trying to implement
	  # the local CVS behavior for remote without the cvs add seems 
	  # pretty difficult).
	  if $remote; then
	    dotest_fail conflicts2-142d2r "${testcvs} -q update" \
"${QUESTION} aa\.c
${QUESTION} same\.c
${CPROG} update: move away \`\./aa\.c'; it is in the way
C aa\.c
${SPROG} update: conflict: \`bb\.c' created independently by second party
C bb\.c
${CPROG} update: move away \`\./same\.c'; it is in the way
C same\.c"
	  else
	    dotest_fail conflicts2-142d2 "${testcvs} -q update" \
"${CPROG} update: move away \`aa\.c'; it is in the way
C aa\.c
${CPROG} update: conflict: \`bb\.c' created independently by second party
C bb\.c
U same\.c"
	  fi
	  dotest conflicts2-142d3 "${testcvs} -q status aa.c" \
"${SPROG} status: move away \`aa\.c'; it is in the way
===================================================================
File: aa\.c             	Status: Unresolved Conflict

   Working revision:	No entry for aa\.c
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/aa\.c,v
   Commit Identifier:	${commitid}"
	  dotest conflicts2-142d3a "${testcvs} -q status bb.c" \
"${SPROG} status: conflict: \`bb\.c' created independently by second party
===================================================================
File: bb\.c             	Status: Unresolved Conflict

   Working revision:	New file!
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/bb\.c,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"

	  # FIXCVS
	  # This message seems somewhat bogus.  I mean, parallel development
	  # means that we get to work in parallel if we choose, right?  And
	  # then at commit time it would be a conflict.
	  #
	  # Well, the status is "Unresolved conflict" before _and_ after
	  # the update/merge (when conflicts happen, not at commit time).
	  # It is possible that this message could be changed to something
	  # more infomrative to novice users, like "File of same name exists
	  # in repository", or "File of same name committed independantly by
	  # second party", but these two messages look too long for the Status
	  # field and the move away & added independantly error messages _are_
	  # displayed.  Still, we get a lot of questions about this on the
	  # email lists.  Somehow we need to get more information to users
	  # via these messages and the ones generated by update. -DRP
	  dotest_fail conflicts2-142d4 "${testcvs} -q add aa.c" \
"${SPROG} add: \`aa.c' added independently by second party"

	  # The user might want to see just what the conflict is.
	  # Don't bother, diff seems to kind of lose its mind, with or
	  # without -N.  This is a CVS bug(s).
	  #dotest conflicts2-142d5 \
	  #"${testcvs} -q diff -r HEAD -N aa.c" FIXCVS THEN FIXME

	  # Now: "how can the user resolve this conflict", I hear you cry.
	  # Well, one way is to forget about the file in the working
	  # directory.
	  # Since it didn't let us do the add in conflicts2-142d4, there
	  # is no need to run cvs rm here.
	  #dotest conflicts2-142d6 "${testcvs} -q rm -f aa.c" fixme
	  dotest conflicts2-142d6 "rm aa.c" ''
	  dotest conflicts2-142d7 "${testcvs} -q update aa.c" "U aa\.c"
	  dotest conflicts2-142d8 "cat aa.c" ''

	  # The other way is to use the version from the working directory
	  # instead of the version from the repository.  Unfortunately,
	  # there doesn't seem to be any particularly clear way to do
	  # this (?).

	  dokeep
	  cd ../..
	  rm -r 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	conflicts3)
	  # More tests of conflicts and/or multiple working directories
	  # in general.

	  mkdir 1; cd 1
	  dotest conflicts3-1 "$testcvs -q co -l ."
	  mkdir first-dir
	  dotest conflicts3-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd ..
	  mkdir 2; cd 2
	  dotest conflicts3-3 "${testcvs} -q co -l first-dir" ''
	  cd ../1/first-dir
	  touch file1 file2
	  dotest conflicts3-4 "${testcvs} add file1 file2" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: scheduling file .file2. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  dotest conflicts3-5 "${testcvs} -q ci -m add-them" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.1"
	  cd ../../2/first-dir
	  # Check that -n doesn't make CVS lose its mind as it creates
	  # (or rather, doesn't) a new file.
	  dotest conflicts3-6 "${testcvs} -nq update" \
"U file1
U file2"
	  dotest_fail conflicts3-7 "test -f file1" ''
	  dotest conflicts3-8 "${testcvs} -q update" \
"U file1
U file2"
	  dotest conflicts3-9 "test -f file2" ''

	  # OK, now remove two files at once
	  dotest conflicts3-10 "${testcvs} rm -f file1 file2" \
"${SPROG} remove: scheduling .file1. for removal
${SPROG} remove: scheduling .file2. for removal
${SPROG} remove: use .${SPROG} commit. to remove these files permanently"
	  dotest conflicts3-11 "${testcvs} -q ci -m remove-them" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: delete; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: delete; previous revision: 1\.1"
	  cd ../../1/first-dir
	  dotest conflicts3-12 "${testcvs} -n -q update" \
"${SPROG} update: \`file1' is no longer in the repository
${SPROG} update: \`file2' is no longer in the repository"
	  dotest conflicts3-13 "${testcvs} -q update" \
"${SPROG} update: \`file1' is no longer in the repository
${SPROG} update: \`file2' is no longer in the repository"

	  # OK, now add a directory to both working directories
	  # and see that CVS doesn't lose its mind.
	  mkdir sdir
	  dotest conflicts3-14 "${testcvs} add sdir" \
"Directory ${CVSROOT_DIRNAME}/first-dir/sdir added to the repository"
	  touch sdir/sfile
	  dotest conflicts3-14a "${testcvs} add sdir/sfile" \
"${SPROG} add: scheduling file .sdir/sfile. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest conflicts3-14b "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/sdir/sfile,v  <--  sdir/sfile
initial revision: 1\.1"

	  cd ../../2/first-dir

	  # Create a CVS directory without the proper administrative
	  # files in it.  This can happen for example if you hit ^C
	  # in the middle of a checkout.
	  mkdir sdir
	  mkdir sdir/CVS
	  # OK, in the local case CVS sees that the directory exists
	  # in the repository and recurses into it.  In the remote case
	  # CVS can't see the repository and has no way of knowing
	  # that sdir is even a directory (stat'ing everything would be
	  # too slow).  The remote behavior makes more sense to me (but
	  # would this affect other cases?).
	  if $remote; then
	    dotest conflicts3-15 "${testcvs} -q update" \
"${QUESTION} sdir"
	  else
	    dotest conflicts3-15 "${testcvs} -q update" \
"${QUESTION} sdir
${SPROG} update: ignoring sdir (CVS/Repository missing)"
	    touch sdir/CVS/Repository
	    dotest conflicts3-16 "${testcvs} -q update" \
"${QUESTION} sdir
${SPROG} update: ignoring sdir (CVS/Entries missing)"
	    cd ..
	    dotest conflicts3-16a "${testcvs} -q update first-dir" \
"${QUESTION} first-dir/sdir
${SPROG} update: ignoring first-dir/sdir (CVS/Entries missing)"
	    cd first-dir
	  fi
	  rm -r sdir

	  # OK, now the same thing, but the directory doesn't exist
	  # in the repository.
	  mkdir newdir
	  mkdir newdir/CVS
	  dotest conflicts3-17 "${testcvs} -q update" "${QUESTION} newdir"
	  echo "D/newdir////" >> CVS/Entries
	  dotest conflicts3-18 "${testcvs} -q update" \
"${CPROG} update: ignoring newdir (CVS/Repository missing)"
	  touch newdir/CVS/Repository
	  dotest conflicts3-19 "${testcvs} -q update" \
"${CPROG} update: ignoring newdir (CVS/Entries missing)"
	  cd ..
	  dotest conflicts3-20 "${testcvs} -q update first-dir" \
"${CPROG} update: ignoring first-dir/newdir (CVS/Entries missing)"
	  cd first-dir
	  rm -r newdir

	  # The previous tests have left CVS/Entries in something of a mess.
	  # While we "should" be able to deal with that (maybe), for now
	  # we just start over.
	  cd ..
	  rm -r first-dir
	  dotest conflicts3-20a "${testcvs} -q co -l first-dir" ''
	  cd first-dir

	  dotest conflicts3-21 "${testcvs} -q update -d sdir" "U sdir/sfile"
	  rm -r sdir/CVS
	  dotest conflicts3-22 "${testcvs} -q update" "${QUESTION} sdir"
	  if $remote; then
	    dotest_fail conflicts3-23 "${testcvs} -q update -PdA" \
"${QUESTION} sdir
${CPROG} update: move away \`sdir/sfile'; it is in the way
C sdir/sfile"
	  else
	    dotest conflicts3-23 "${testcvs} -q update -PdA" \
"${QUESTION} sdir"
	  fi

	  # Not that it should really affect much, but let's do the case
	  # where sfile has been removed.  For example, suppose that sdir
	  # had been a CVS-controlled directory which was then removed
	  # by removing each file (and using update -P or some such).  Then
	  # suppose that the build process creates an sdir directory which
	  # is not supposed to be under CVS.
	  rm -r sdir
	  dotest conflicts3-24 "${testcvs} -q update -d sdir" "U sdir/sfile"
	  rm sdir/sfile
	  dotest conflicts3-25 "${testcvs} rm sdir/sfile" \
"${SPROG} remove: scheduling .sdir/sfile. for removal
${SPROG} remove: use .${SPROG} commit. to remove this file permanently"
	  dotest conflicts3-26 "${testcvs} ci -m remove sdir/sfile" \
"${CVSROOT_DIRNAME}/first-dir/sdir/sfile,v  <--  sdir/sfile
new revision: delete; previous revision: 1\.1"
	  rm -r sdir/CVS
	  dotest conflicts3-27 "${testcvs} -q update" "${QUESTION} sdir"
	  dotest conflicts3-28 "${testcvs} -q update -PdA" \
"${QUESTION} sdir"

	  dokeep
	  cd ../..
	  rm -r 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	clean)
	  # Test update -C (overwrite local mods w/ repository copies)
	  mkdir 1; cd 1
	  dotest clean-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest clean-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  echo "The usual boring test text." > cleanme.txt
          dotest clean-3 "${testcvs} add cleanme.txt" \
"${SPROG} add: scheduling file .cleanme\.txt. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest clean-4 "${testcvs} -q ci -m clean-3" \
"$CVSROOT_DIRNAME/first-dir/cleanme\.txt,v  <--  cleanme\.txt
initial revision: 1\.1"
          # Okay, preparation is done, now test.
          # Check that updating an unmodified copy works.
	  dotest clean-5 "${testcvs} -q update" ''
          # Check that updating -C an unmodified copy works.
	  dotest clean-6 "${testcvs} -q update -C" ''
          # Check that updating a modified copy works.
	  echo "fish" >> cleanme.txt
	  dotest clean-7 "${testcvs} -q update" 'M cleanme\.txt'
          # Check that updating -C a modified copy works.
	  dotest clean-8 "${testcvs} -q update -C" \
"(Locally modified cleanme\.txt moved to \.#cleanme\.txt\.1\.1)
U cleanme\.txt"
	  # And check that the backup copy really was made.
	  dotest clean-9 "cat .#cleanme.txt.1.1" \
"The usual boring test text\.
fish"

          # Do it all again, this time naming the file explicitly.
	  rm .#cleanme.txt.1.1
	  dotest clean-10 "${testcvs} -q update cleanme.txt" ''
	  dotest clean-11 "${testcvs} -q update -C cleanme.txt" ''
	  echo "bluegill" >> cleanme.txt
	  dotest clean-12 "${testcvs} -q update cleanme.txt" 'M cleanme\.txt'
	  dotest clean-13 "${testcvs} -q update -C cleanme.txt" \
"(Locally modified cleanme\.txt moved to \.#cleanme\.txt\.1\.1)
U cleanme\.txt"
	  # And check that the backup copy really was made.
	  dotest clean-14 "cat .#cleanme.txt.1.1" \
"The usual boring test text\.
bluegill"

	  # Now try with conflicts
	  cd ..
	  dotest clean-15 "${testcvs} -q co -d second-dir first-dir" \
'U second-dir/cleanme\.txt'
	  cd second-dir
	  echo "conflict test" >> cleanme.txt
	  dotest clean-16 "${testcvs} -q ci -m." \
"$CVSROOT_DIRNAME/first-dir/cleanme\.txt,v  <--  cleanme\.txt
new revision: 1\.2; previous revision: 1\.1"
	  cd ../first-dir
	  echo "fish" >> cleanme.txt
	  dotest clean-17 "${testcvs} -nq update" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/cleanme\.txt,v
retrieving revision 1\.1
retrieving revision 1\.2
Merging differences between 1\.1 and 1\.2 into cleanme\.txt
rcsmerge: warning: conflicts during merge
${SPROG} update: conflicts found in cleanme\.txt
C cleanme\.txt"
	  dotest clean-18 "${testcvs} -q update -C" \
"(Locally modified cleanme\.txt moved to \.#cleanme\.txt\.1\.1)
U cleanme\.txt"
	  dotest clean-19 "cat .#cleanme.txt.1.1" \
"The usual boring test text\.
fish"
	  
          # Done.  Clean up.
	  dokeep
	  cd ../..
          rm -rf 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	keywordexpand)
	  # Tests of the original *BSD tag= and keywordexpand= features
	  # are done via the LocalKeyword= and KeywordExpand features.

	  # Skip this in noredirect mode because it is too easy for the primary
	  # and secondary error messages to get out of sync when the
	  # CVSROOT/config files are broken.  This is intentional, since it is
	  # possible and even likely that an administrator might want to set up
	  # different configurations on the two servers and the paths to the
	  # config files on the secondary and primary were intentionally left
	  # intact even though they might be different.
	  if $noredirect; then
            notnoredirect keywordexpand
	    continue
	  fi

	  mkdir keywordexpand; cd keywordexpand

	  dotest keywordexpand-1 "${testcvs} -q co CVSROOT" \
'U CVSROOT/access
U CVSROOT/aclconfig
U CVSROOT/checkoutlist
U CVSROOT/commitinfo
U CVSROOT/config
U CVSROOT/cvswrappers
U CVSROOT/group
U CVSROOT/loginfo
U CVSROOT/modules
U CVSROOT/notify
U CVSROOT/postadmin
U CVSROOT/postproxy
U CVSROOT/posttag
U CVSROOT/postwatch
U CVSROOT/preproxy
U CVSROOT/rcsinfo
U CVSROOT/taginfo
U CVSROOT/verifymsg'
	  cd CVSROOT
	  echo LocalKeyword=MyBSD=CVSHeader >> config
	  # First do not expand any keywords
	  echo KeywordExpand=i >> config
	  dotest keywordexpand-2 "${testcvs} -Q ci -mkeywordexpand config"

	  cd ..

	  mkdir testimport; cd testimport
	  echo '$''Author$' > file1
	  echo '$''Date$' >> file1
	  echo '$''CVSHeader$' >> file1
	  echo '$''Header$' >> file1
	  echo '$''Id$' >> file1
	  echo '$''Locker$' >> file1
	  echo '$''Log$' >> file1
	  echo '$''Name$' >> file1
	  echo '$''RCSfile$' >> file1
	  echo '$''Revision$' >> file1
	  echo '$''Source$' >> file1
	  echo '$''State$' >> file1
	  echo '$''MyBSD$' >> file1
	  dotest keywordexpand-3 \
"${testcvs} -Q import -I ! -m test-import-with-bsd-keyword keywordexpand vendor v1" \
''
	  cd ..

	  dotest keywordexpand-4 "${testcvs} -Q checkout keywordexpand" ''
	  cd keywordexpand
	  dotest keywordexpand-5 "cat file1" \
"\$""Author\$
\$""Date\$
\$""CVSHeader\$
\$""Header\$
\$""Id\$
\$""Locker\$
\$""Log\$
\$""Name\$
\$""RCSfile\$
\$""Revision\$
\$""Source\$
\$""State\$
\$MyBSD\$"
	  cd ../CVSROOT
	  # Now expand just the MyBSD and Id keywords
	  mv config config.old
	  sed -e 's/KeywordExpand=i/KeywordExpand=iMyBSD,Id/' < config.old > config
	  rm -f config.old
	  dotest keywordexpand-6 "${testcvs} -Q ci -mkeywordexpand config"
	  cd ../keywordexpand
	  echo 'a change' >> file1
	  dotest keywordexpand-7 "${testcvs} -Q ci -madd"
	  dotest keywordexpand-8 "cat file1" \
"\$""Author\$
\$""Date\$
\$""CVSHeader\$
\$""Header\$
\$""Id: file1,v 1\.2 [0-9/]* [0-9:]* ${username} Exp \$
\$""Locker\$
\$""Log\$
\$""Name\$
\$""RCSfile\$
\$""Revision\$
\$""Source\$
\$""State\$
\$MyBSD: keywordexpand/file1,v 1\.2 [0-9/]* [0-9:]* ${username} Exp \$
a change"

	  cd ../CVSROOT
	  mv config config.old
	  sed -e 's/LocalKeyword=MyBSD/LocalKeyword=My_BSD/' \
	      <config.old >config
	  dotest keywordexpand-9 "$testcvs -Q ci -minvalidlocalkeyword config"
	  dotest keywordexpand-10 "$testcvs -Q update config" \
"$SPROG [a-z]*: $SECONDARY_CVSROOT_DIRNAME/CVSROOT/config \[[1-9][0-9]*\]: LocalKeyword ignored: Bad character \`_' in key \`My_BSD'"
	  cp config.old config
	  dotest keywordexpand-11 "$testcvs -Q ci -mfixit config" \
"$SPROG [a-z]*: $SECONDARY_CVSROOT_DIRNAME/CVSROOT/config \[[1-9][0-9]*\]: LocalKeyword ignored: Bad character \`_' in key \`My_BSD'" \
"$SPROG [a-z]*: $SECONDARY_CVSROOT_DIRNAME/CVSROOT/config \[[1-9][0-9]*\]: LocalKeyword ignored: Bad character \`_' in key \`My_BSD'
$SPROG [a-z]*: $CVSROOT_DIRNAME/CVSROOT/config \[[1-9][0-9]*\]: LocalKeyword ignored: Bad character \`_' in key \`My_BSD'"
	  dotest keywordexpand-12 "$testcvs -Q update config"
	  sed -e 's/LocalKeyword=MyBSD=CVSHeader/LocalKeyword=MyBSD=Name/' \
	      <config.old >config
	  dotest keywordexpand-13 \
"$testcvs -Q ci -minvalidlocalkeyword2 config"
	  dotest keywordexpand-14 "$testcvs -Q update config" \
"$SPROG [a-z]*: $SECONDARY_CVSROOT_DIRNAME/CVSROOT/config \[[1-9][0-9]*\]: LocalKeyword ignored: Unknown LocalId mode: \`Name'"
	  cp config.old config
	  dotest keywordexpand-15 "$testcvs -Q ci -mfixit2 config" \
"$SPROG [a-z]*: $SECONDARY_CVSROOT_DIRNAME/CVSROOT/config \[[1-9][0-9]*\]: LocalKeyword ignored: Unknown LocalId mode: \`Name'" \
"$SPROG [a-z]*: $SECONDARY_CVSROOT_DIRNAME/CVSROOT/config \[[1-9][0-9]*\]: LocalKeyword ignored: Unknown LocalId mode: \`Name'
$SPROG [a-z]*: $CVSROOT_DIRNAME/CVSROOT/config \[[1-9][0-9]*\]: LocalKeyword ignored: Unknown LocalId mode: \`Name'"
	  dotest keywordexpand-16 "$testcvs -Q update config"

	  dokeep
	  # Done. Clean up.
	  cd ../..
	  rm -rf $TESTDIR/keywordexpand
          modify_repo rm -rf $CVSROOT_DIRNAME/keywordexpand
	  restore_adm
	  ;;



	modules)
	  # Tests of various ways to define and use modules.
	  # Roadmap to various modules tests:
	  # -a:
	  #   error on incorrect placement: modules
	  #   error combining with other options: modules2-a*
	  #   infinite loops: modules148a1.1 - modules148a1.2
	  #   use to specify a file more than once: modules3
	  #   use with ! feature: modules4
	  # regular modules: modules, modules2, cvsadm
	  # ampersand modules: modules2
	  # -s: modules.
	  # -d: modules, modules3, cvsadm
	  # -i, -o, -u, -e, -t: modules5
	  # slashes in module names: modules3
	  # invalid module definitions: modules6

	  ############################################################
	  # These tests are to make sure that administrative files get
	  # rebuilt, regardless of how and where files are checked
	  # out.
	  ############################################################
	  # Check out the whole repository
	  mkdir 1; cd 1
	  dotest modules-1 "${testcvs} -q co ." 'U CVSROOT/access
U CVSROOT/aclconfig
U CVSROOT/checkoutlist
U CVSROOT/commitinfo
U CVSROOT/config
U CVSROOT/cvswrappers
U CVSROOT/group
U CVSROOT/loginfo
U CVSROOT/modules
U CVSROOT/notify
U CVSROOT/postadmin
U CVSROOT/postproxy
U CVSROOT/posttag
U CVSROOT/postwatch
U CVSROOT/preproxy
U CVSROOT/rcsinfo
U CVSROOT/taginfo
U CVSROOT/verifymsg'
	  echo "# made a change" >>CVSROOT/modules
	  dotest modules-1d "${testcvs} -q ci -m add-modules" \
"$CVSROOT_DIRNAME/CVSROOT/modules,v  <--  CVSROOT/modules
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  cd ..
	  rm -rf 1

	  ############################################################
	  # Check out CVSROOT
	  mkdir 1; cd 1
	  dotest modules-2 "${testcvs} -q co CVSROOT" 'U CVSROOT/access
U CVSROOT/aclconfig
U CVSROOT/checkoutlist
U CVSROOT/commitinfo
U CVSROOT/config
U CVSROOT/cvswrappers
U CVSROOT/group
U CVSROOT/loginfo
U CVSROOT/modules
U CVSROOT/notify
U CVSROOT/postadmin
U CVSROOT/postproxy
U CVSROOT/posttag
U CVSROOT/postwatch
U CVSROOT/preproxy
U CVSROOT/rcsinfo
U CVSROOT/taginfo
U CVSROOT/verifymsg'
	  echo "# made a change" >>CVSROOT/modules
	  dotest modules-2d "${testcvs} -q ci -m add-modules" \
"$CVSROOT_DIRNAME/CVSROOT/modules,v  <--  CVSROOT/modules
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  cd ..
	  rm -rf 1

	  ############################################################
	  # Check out CVSROOT in some other directory
	  modify_repo mkdir $CVSROOT_DIRNAME/somedir
	  mkdir 1; cd 1
	  dotest modules-3 "${testcvs} -q co somedir" ''
	  cd somedir
	  dotest modules-3d "${testcvs} -q co CVSROOT" 'U CVSROOT/access
U CVSROOT/aclconfig
U CVSROOT/checkoutlist
U CVSROOT/commitinfo
U CVSROOT/config
U CVSROOT/cvswrappers
U CVSROOT/group
U CVSROOT/loginfo
U CVSROOT/modules
U CVSROOT/notify
U CVSROOT/postadmin
U CVSROOT/postproxy
U CVSROOT/posttag
U CVSROOT/postwatch
U CVSROOT/preproxy
U CVSROOT/rcsinfo
U CVSROOT/taginfo
U CVSROOT/verifymsg'
	  echo "# made a change" >>CVSROOT/modules
	  dotest modules-3g "${testcvs} -q ci -m add-modules" \
"$CVSROOT_DIRNAME/CVSROOT/modules,v  <--  CVSROOT/modules
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  cd ../..
	  rm -rf 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/somedir
	  ############################################################
	  # end rebuild tests
	  ############################################################


	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir

	  mkdir 1
	  cd 1

	  dotest modules-143 "${testcvs} -q co first-dir" ""

	  cd first-dir
	  mkdir subdir
	  dotest modules-143a "${testcvs} add subdir" \
"Directory ${CVSROOT_DIRNAME}/first-dir/subdir added to the repository"

	  cd subdir
	  mkdir ssdir
	  dotest modules-143b "${testcvs} add ssdir" \
"Directory ${CVSROOT_DIRNAME}/first-dir/subdir/ssdir added to the repository"

	  touch a b

	  dotest modules-144 "${testcvs} add a b" \
"${SPROG} add: scheduling file .a. for addition
${SPROG} add: scheduling file .b. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"

	  dotest modules-145 "$testcvs ci -m added" \
"$CPROG commit: Examining .
$CPROG commit: Examining ssdir
$CVSROOT_DIRNAME/first-dir/subdir/a,v  <--  a
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/subdir/b,v  <--  b
initial revision: 1\.1"

	  cd ..
	  dotest modules-146 "$testcvs -q co CVSROOT" \
"U CVSROOT/access
U CVSROOT/aclconfig
U CVSROOT/checkoutlist
U CVSROOT/commitinfo
U CVSROOT/config
U CVSROOT/cvswrappers
U CVSROOT/group
U CVSROOT/loginfo
U CVSROOT/modules
U CVSROOT/notify
U CVSROOT/postadmin
U CVSROOT/postproxy
U CVSROOT/posttag
U CVSROOT/postwatch
U CVSROOT/preproxy
U CVSROOT/rcsinfo
U CVSROOT/taginfo
U CVSROOT/verifymsg"

	  # Here we test that CVS can deal with CVSROOT (whose repository
	  # is at top level) in the same directory as subdir (whose repository
	  # is a subdirectory of first-dir).  TODO: Might want to check that
	  # files can actually get updated in this state.
	  dotest modules-147 "$testcvs -q update"

	  cat >CVSROOT/modules <<EOF
realmodule first-dir/subdir a
dirmodule first-dir/subdir
namedmodule -d nameddir first-dir/subdir
aliasmodule -a first-dir/subdir/a
aliasnested -a first-dir/subdir/ssdir
topfiles -a first-dir/file1 first-dir/file2
world -a .
statusmod -s Mungeable
# Check for ability to block infinite loops.
infinitealias -a infinitealias
# Prior to 1.11.12 & 1.12.6, the infinite alias loop check didn't strip
# slashes or work if a module called a module which then called itself
# (A -> A was blocked, but not A -> B -> A or deeper).
infinitealias2 -a infinitealias2/
infinitealias3 -a infinitealias4/
infinitealias4 -a aliasmodule infinitealias5
infinitealias5 -a infinitealias3/
# Options must come before arguments.  It is possible this should
# be relaxed at some point (though the result would be bizarre for
# -a); for now test the current behavior.
bogusalias first-dir/subdir/a -a
EOF
	  dotest modules-148 "$testcvs ci -m 'add modules' CVSROOT/modules" \
"$CVSROOT_DIRNAME/CVSROOT/modules,v  <--  CVSROOT/modules
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	  cd ..
	  # The "statusmod" module contains an error; trying to use it
	  # will produce "modules file missing directory" I think.
	  # However, that shouldn't affect the ability of "cvs co -c" or
	  # "cvs co -s" to do something reasonable with it.
	  dotest modules-148a0 "$testcvs co -c" \
'aliasmodule  -a first-dir/subdir/a
aliasnested  -a first-dir/subdir/ssdir
bogusalias   first-dir/subdir/a -a
dirmodule    first-dir/subdir
infinitealias -a infinitealias
infinitealias2 -a infinitealias2/
infinitealias3 -a infinitealias4/
infinitealias4 -a aliasmodule infinitealias5
infinitealias5 -a infinitealias3/
namedmodule  -d nameddir first-dir/subdir
realmodule   first-dir/subdir a
statusmod    -s Mungeable
topfiles     -a first-dir/file1 first-dir/file2
world        -a \.'
	  # There is code in modules.c:save_d which explicitly skips
	  # modules defined with -a, which is why aliasmodule is not
	  # listed.
	  dotest modules-148a1 "${testcvs} co -s" \
'statusmod    Mungeable  
bogusalias   NONE        first-dir/subdir/a -a
dirmodule    NONE        first-dir/subdir
namedmodule  NONE        first-dir/subdir
realmodule   NONE        first-dir/subdir a'

	  # Check that infinite loops are avoided
	  dotest modules-148a1.1 "${testcvs} co infinitealias" \
"$CPROG checkout: module \`infinitealias' in modules file contains infinite loop" \
"$SPROG server: module \`infinitealias' in modules file contains infinite loop
$SPROG checkout: module \`infinitealias' in modules file contains infinite loop"
	  # Prior to 1.11.12 & 1.12.6, the inifinte alias loop check did not
	  # strip slashes.
	  dotest modules-148a1.2 "${testcvs} co infinitealias2" \
"$CPROG checkout: module \`infinitealias2' in modules file contains infinite loop" \
"$SPROG server: module \`infinitealias2' in modules file contains infinite loop
$SPROG checkout: module \`infinitealias2' in modules file contains infinite loop"
	  # Prior to 1.11.12 & 1.12.6, the inifinte alias loop check did not
	  # notice when A -> B -> A, it only noticed A -> A.
	  dotest modules-148a1.3 "${testcvs} co infinitealias3/" \
"$CPROG checkout: module \`infinitealias3' in modules file contains infinite loop" \
"$SPROG server: module \`infinitealias3' in modules file contains infinite loop
$SPROG checkout: module \`infinitealias3' in modules file contains infinite loop"

	  # Test that real modules check out to realmodule/a, not subdir/a.
	  dotest modules-149a1 "${testcvs} co realmodule" "U realmodule/a"
	  dotest modules-149a2 "test -d realmodule && test -f realmodule/a" ""
	  dotest_fail modules-149a3 "test -f realmodule/b" ""
	  dotest modules-149a4 "${testcvs} -q co realmodule" ""
	  dotest modules-149a5 "echo yes | ${testcvs} release -d realmodule" \
"You have \[0\] altered files in this repository\.
Are you sure you want to release (and delete) directory .realmodule.: "

	  dotest_fail modules-149b1 "${testcvs} co realmodule/a" \
"${SPROG}"' checkout: module `realmodule/a'\'' is a request for a file in a module which is not a directory' \
"${SPROG}"' server: module `realmodule/a'\'' is a request for a file in a module which is not a directory
'"${CPROG}"' \[checkout aborted\]: cannot expand modules'

	  # Now test the ability to check out a single file from a directory
	  dotest modules-150c "${testcvs} co dirmodule/a" "U dirmodule/a"
	  dotest modules-150d "test -d dirmodule && test -f dirmodule/a" ""
	  dotest_fail modules-150e "test -f dirmodule/b" ""
	  dotest modules-150f "echo yes | ${testcvs} release -d dirmodule" \
"You have \[0\] altered files in this repository\.
Are you sure you want to release (and delete) directory .dirmodule.: "
	  # Now test the ability to correctly reject a non-existent filename.
	  # For maximum studliness we would check that an error message is
	  # being output.
	  # We accept a zero exit status because it is what CVS does
	  # (Dec 95).  Probably the exit status should be nonzero,
	  # however.
	  dotest modules-150g1 "${testcvs} co dirmodule/nonexist" \
"${SPROG} checkout: warning: new-born \`dirmodule/nonexist' has disappeared"
	  # We tolerate the creation of the dirmodule directory, since that
	  # is what CVS does, not because we view that as preferable to not
	  # creating it.
	  dotest_fail modules-150g2 "test -f dirmodule/a || test -f dirmodule/b" ""
	  rm -r dirmodule

	  # Now test that a module using -d checks out to the specified
	  # directory.
	  dotest modules-150h1 "${testcvs} -q co namedmodule" \
'U nameddir/a
U nameddir/b'
	  dotest modules-150h2 "test -f nameddir/a && test -f nameddir/b" ""
	  echo add line >>nameddir/a
	  dotest modules-150h3 "${testcvs} -q co namedmodule" 'M nameddir/a'
	  rm nameddir/a
	  dotest modules-150h4 "${testcvs} -q co namedmodule" 'U nameddir/a'
	  dotest modules-150h99 "echo yes | ${testcvs} release -d nameddir" \
"You have \[0\] altered files in this repository\.
Are you sure you want to release (and delete) directory .nameddir.: "

	  # Now test that alias modules check out to subdir/a, not
	  # aliasmodule/a.
	  dotest modules-151 "${testcvs} co aliasmodule" ""
	  dotest_fail modules-152 "test -d aliasmodule" ""
	  echo abc >>first-dir/subdir/a
	  dotest modules-153 "${testcvs} -q co aliasmodule" "M first-dir/subdir/a"

	  cd ..
	  rm -r 1

	  mkdir 2
	  cd 2
	  dotest modules-155a0 "${testcvs} co aliasnested" \
"${SPROG} checkout: Updating first-dir/subdir/ssdir"
	  dotest modules-155a1 "test -d first-dir" ''
	  dotest modules-155a2 "test -d first-dir/subdir" ''
	  dotest modules-155a3 "test -d first-dir/subdir/ssdir" ''
	  # Test that nothing extraneous got created.
	  dotest modules-155a4 "ls" "first-dir" \
"CVS
first-dir"
	  cd ..
	  rm -r 2

	  # Test checking out everything.
	  mkdir 1
	  cd 1
	  dotest modules-155b "${testcvs} -q co world" \
"U CVSROOT/${DOTSTAR}
U first-dir/subdir/a
U first-dir/subdir/b"
	  cd ..
	  rm -r 1

	  # Test checking out a module which lists at least two
	  # specific files twice.  At one time, this failed over
	  # remote CVS.
	  mkdir 1
	  cd 1
	  dotest modules-155c1 "${testcvs} -q co first-dir" \
"U first-dir/subdir/a
U first-dir/subdir/b"

	  cd first-dir
	  echo 'first revision' > file1
	  echo 'first revision' > file2
	  dotest modules-155c2 "${testcvs} add file1 file2" \
"${SPROG}"' add: scheduling file `file1'\'' for addition
'"${SPROG}"' add: scheduling file `file2'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add these files permanently'
	  dotest modules-155c3 "${testcvs} -q ci -m add-it" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.1"

	  cd ..
	  rm -r first-dir
	  dotest modules-155c4 "${testcvs} -q co topfiles" \
"U first-dir/file1
U first-dir/file2"
	  dotest modules-155c5 "${testcvs} -q co topfiles" ""

	  # Make sure the right thing happens if we remove a file.
	  cd first-dir
	  dotest modules-155c6 "${testcvs} -q rm -f file1" \
"${SPROG} remove: use .${SPROG} commit. to remove this file permanently"
	  dotest modules-155c7 "${testcvs} -q ci -m remove-it" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: delete; previous revision: 1\.1"
	  cd ..
	  rm -r first-dir
	  dotest modules-155c8 "${testcvs} -q co topfiles" \
"${SPROG} checkout: warning: \`first-dir/file1' is not (any longer) pertinent
U first-dir/file2"

	  dokeep
	  cd ..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	modules2)
	  # More tests of modules, in particular the & feature.
	  mkdir 1; cd 1
	  dotest modules2-setup-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir second-dir third-dir
	  dotest modules2-setup-2 \
"${testcvs} add first-dir second-dir third-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository
Directory ${CVSROOT_DIRNAME}/second-dir added to the repository
Directory ${CVSROOT_DIRNAME}/third-dir added to the repository"
	  cd third-dir
	  touch file3
	  dotest modules2-setup-3 "${testcvs} add file3" \
"${SPROG} add: scheduling file .file3. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest modules2-setup-4 "${testcvs} -q ci -m add file3" \
"$CVSROOT_DIRNAME/third-dir/file3,v  <--  file3
initial revision: 1\.1"
	  cd ../..
	  rm -r 1

	  mkdir 1
	  cd 1

	  dotest modules2-1 "${testcvs} -q co CVSROOT/modules" \
'U CVSROOT/modules'
	  cd CVSROOT
	  cat >> modules << EOF
ampermodule &first-dir &second-dir
combmodule third-dir file3 &first-dir
ampdirmod -d newdir &first-dir &second-dir
badmod -d newdir
messymod first-dir &messymodchild
messymodchild -d sdir/child second-dir
EOF
	  # Depending on whether the user also ran the modules test
	  # we will be checking in revision 1.2 or 1.3.
	  dotest modules2-2 "${testcvs} -q ci -m add-modules" \
"$CVSROOT_DIRNAME/CVSROOT/modules,v  <--  modules
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	  cd ..

	  dotest modules2-3 "${testcvs} -q co ampermodule" ''
	  dotest modules2-4 "test -d ampermodule/first-dir" ''
	  dotest modules2-5 "test -d ampermodule/second-dir" ''

	  # Test ability of cvs release to handle multiple arguments
	  # See comment at "release" for list of other cvs release tests.
	  cd ampermodule
	  if ${testcvs} release -d first-dir second-dir <<EOF >>${LOGFILE}
yes
yes
EOF
	  then
	    pass modules2-6
	  else
	    fail modules2-6
	  fi
	  dotest_fail modules2-7 "test -d first-dir" ''
	  dotest_fail modules2-8 "test -d second-dir" ''

	  cd ..

	  # There used to be a nasty-hack that made CVS skip creation of the
	  # module dir (in this case ampermodule) when -n was specified
	  dotest modules2-ampermod-1 "${testcvs} -q co -n ampermodule" ''
	  dotest modules2-ampermod-2 "test -d ampermodule/first-dir" ''
	  dotest modules2-ampermod-3 "test -d ampermodule/second-dir" ''

	  # Test release of a module
	  if echo yes |${testcvs} release -d ampermodule >>${LOGFILE}; then
	    pass modules2-ampermod-release-1
	  else
	    fail modules2-ampermod-release-1
	  fi
	  dotest_fail modules2-ampermod-release-2 "test -d ampermodule" ''

	  # and the '-n' test again, but in conjunction with '-d'
	  dotest modules2-ampermod-4 "${testcvs} -q co -n -d newname ampermodule" ''
	  dotest modules2-ampermod-5 "test -d newname/first-dir" ''
	  dotest modules2-ampermod-6 "test -d newname/second-dir" ''
	  rm -rf newname

	  # Now we create another directory named first-dir and make
	  # sure that CVS doesn't get them mixed up.
	  mkdir first-dir
	  # Note that this message should say "Updating ampermodule/first-dir"
	  # I suspect.  This is a long-standing behavior/bug....
	  dotest modules2-9 "${testcvs} co ampermodule" \
"${SPROG} checkout: Updating first-dir
${SPROG} checkout: Updating second-dir"
	  touch ampermodule/first-dir/amper1
	  cd ampermodule
	  dotest modules2-10 "${testcvs} add first-dir/amper1" \
"${SPROG} add: scheduling file .first-dir/amper1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  cd ..

	  # As with the "Updating xxx" message, the "U first-dir/amper1"
	  # message (instead of "U ampermodule/first-dir/amper1") is
	  # rather fishy.
	  dotest modules2-12 "${testcvs} co ampermodule" \
"${SPROG} checkout: Updating first-dir
A first-dir/amper1
${SPROG} checkout: Updating second-dir"

	  if $remote; then
	    dotest modules2-13r "$testcvs -q ci -m add-it ampermodule" \
"$CVSROOT_DIRNAME/first-dir/amper1,v  <--  ampermodule/first-dir/amper1
initial revision: 1\.1"
	  else
	    # Trying this as above led to a "protocol error" message.
	    # Work around this bug.
	    cd ampermodule
	    dotest modules2-13 "$testcvs -q ci -m add-it" \
"$CVSROOT_DIRNAME/first-dir/amper1,v  <--  first-dir/amper1
initial revision: 1\.1"
	    cd ..
	  fi
	  cd ..
	  rm -r 1

	  # Now test the "combmodule" module (combining regular modules
	  # and ampersand modules in the same module definition).
	  mkdir 1; cd 1
	  dotest modules2-14 "${testcvs} co combmodule" \
"U combmodule/file3
${SPROG} checkout: Updating first-dir
U first-dir/amper1"
	  dotest modules2-15 "test -f combmodule/file3" ""
	  dotest modules2-16 "test -f combmodule/first-dir/amper1" ""
	  cd combmodule
	  rm -r first-dir
	  # At least for now there is no way to tell CVS that
	  # some files/subdirectories come from one repository directory,
	  # and others from another.
	  # This seems like a pretty sensible behavior to me, in the
	  # sense that first-dir doesn't "really" exist within
	  # third-dir, so CVS just acts as if there is nothing there
	  # to do.
	  dotest modules2-17 "${testcvs} update -d" \
"${SPROG} update: Updating \."

	  cd ..
	  dotest modules2-18 "${testcvs} -q co combmodule" \
"U first-dir/amper1"
	  dotest modules2-19 "test -f combmodule/first-dir/amper1" ""
	  cd ..
	  rm -r 1

	  # Now test the "ampdirmod" and "badmod" modules to be sure that
	  # options work with ampersand modules but don't prevent the
	  # "missing directory" error message.
	  mkdir 1; cd 1
	  dotest modules2-20 "${testcvs} co ampdirmod" \
"${SPROG} checkout: Updating first-dir
U first-dir/amper1
${SPROG} checkout: Updating second-dir"
	  dotest modules2-21 "test -f newdir/first-dir/amper1" ""
	  dotest modules2-22 "test -d newdir/second-dir" ""
	  dotest_fail modules2-23 "${testcvs} co badmod" \
"${SPROG} checkout: modules file missing directory for module badmod" \
"${SPROG} server: modules file missing directory for module badmod
${CPROG} \[checkout aborted\]: cannot expand modules"
	  cd ..
	  rm -r 1

	  # Confirm that a rename with added depth nested in an ampersand
	  # module works.
	  mkdir 1; cd 1
	  dotest modules2-nestedrename-1 "${testcvs} -q co messymod" \
"U messymod/amper1"
	  dotest modules2-nestedrename-2 "test -d messymod/sdir" ''
	  dotest modules2-nestedrename-3 "test -d messymod/sdir/CVS" ''
	  dotest modules2-nestedrename-4 "test -d messymod/sdir/child" ''
	  dotest modules2-nestedrename-5 "test -d messymod/sdir/child/CVS" ''
	  cd ..; rm -r 1

	  # FIXME:  client/server has a bug.  It should be working like a local
	  # repository in this case, but fails to check out the second module
	  # in the list when a branch is specified.
	  mkdir 1; cd 1
	  dotest modules2-ampertag-setup-1 \
"${testcvs} -Q rtag tag first-dir second-dir third-dir" \
''
	  dotest modules2-ampertag-1 "${testcvs} -q co -rtag ampermodule" \
"U first-dir/amper1"
	  if $remote; then
	    dotest_fail modules2-ampertag-2 "test -d ampermodule/second-dir" ''
	    dotest_fail modules2-ampertag-3 "test -d ampermodule/second-dir/CVS" ''
	  else
	    dotest modules2-ampertag-2 "test -d ampermodule/second-dir" ''
	    dotest modules2-ampertag-3 "test -d ampermodule/second-dir/CVS" ''
	  fi
	  cd ..; rm -r 1

	  # Test for tag files when an ampermod is renamed with more path
	  # elements than it started with.
	  #
	  # FIXME: This is currently broken in the remote case, possibly only
	  # because the messymodchild isn't being checked out at all.
	  mkdir 1; cd 1
#	  dotest modules2-tagfiles-setup-1 \
#"${testcvs} -Q rtag -b branch first-dir second-dir" \
#''
	  dotest modules2-tagfiles-1 "${testcvs} -q co -rtag messymod" \
"U messymod/amper1"
	  if $remote; then
	    dotest_fail modules2-tagfiles-2r "test -d messymod/sdir" ''
	  else
	    dotest modules2-tagfiles-2 "cat messymod/sdir/CVS/Tag" 'Ttag'
	  fi
	  cd ..; rm -r 1

	  # Test that CVS gives an error if one combines -a with
	  # other options.
	  # Probably would be better to break this out into a separate
	  # test.  Although it is short, it shares no files/state with
	  # the rest of the modules2 tests.
	  mkdir 1; cd 1
	  dotest modules2-a0.5 "${testcvs} -q co CVSROOT/modules" \
'U CVSROOT/modules'
	  cd CVSROOT
	  echo 'aliasopt -a -d onedir first-dir' >modules
	  dotest modules2-a0 "${testcvs} -q ci -m add-modules" \
"$CVSROOT_DIRNAME/CVSROOT/modules,v  <--  modules
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  cd ..
	  dotest_fail modules2-a1 "${testcvs} -q co aliasopt" \
"${SPROG} checkout: -a cannot be specified in the modules file along with other options" \
"${SPROG} server: -a cannot be specified in the modules file along with other options
${CPROG} \[checkout aborted\]: cannot expand modules"
	  cd ..;  rm -r 1

	  # Clean up.
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir \
			     $CVSROOT_DIRNAME/second-dir \
			     $CVSROOT_DIRNAME/third-dir
	  ;;



	modules3)
	  # More tests of modules, in particular what happens if several
	  # modules point to the same file.

	  # First just set up a directory first-dir and a file file1 in it.
	  mkdir 1; cd 1

	  dotest modules3-0 "$testcvs -q co -l ."
	  mkdir first-dir
	  dotest modules3-1 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"

	  cd first-dir
	  echo file1 >file1
	  dotest modules3-2 "${testcvs} add file1" \
"${SPROG} add: scheduling file \`file1' for addition
${SPROG} add: use \`${SPROG} commit' to add this file permanently"
	  dotest modules3-3 "${testcvs} -q ci -m add-it" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  cd ..

	  dotest modules3-4 "${testcvs} -q update -d CVSROOT" \
"U CVSROOT${DOTSTAR}"
	  cd CVSROOT
	  cat >modules <<EOF
mod1 -a first-dir/file1
bigmod -a mod1 first-dir/file1
namednest -d src/sub/dir first-dir
nestdeeper -d src/sub1/sub2/sub3/dir first-dir
nestshallow -d src/dir second-dir/suba/subb
path/in/modules &mod1
another/path/test -d another/path/test first-dir
EOF
	  dotest modules3-5 "${testcvs} -q ci -m add-modules" \
"$CVSROOT_DIRNAME/CVSROOT/modules,v  <--  modules
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  cd ..

	  dotest modules3-6 "${testcvs} -q co bigmod" ''
	  rm -r first-dir
	  dotest modules3-7 "${testcvs} -q co bigmod" 'U first-dir/file1'
	  cd ..
	  rm -r 1

	  mkdir 1; cd 1
	  mkdir suba
	  mkdir suba/subb
	  # This fails to work remote (it doesn't notice the directories,
	  # I suppose because they contain no files).  Bummer, especially
	  # considering this is a documented technique and everything.
	  dotest modules3-7a \
"${testcvs} import -m add-dirs second-dir tag1 tag2" \
"${SPROG} import: Importing ${CVSROOT_DIRNAME}/second-dir/suba
${SPROG} import: Importing ${CVSROOT_DIRNAME}/second-dir/suba/subb

No conflicts created by this import" "
No conflicts created by this import"
	  cd ..; rm -r 1
	  mkdir 1; cd 1
	  dotest modules3-7b "${testcvs} co second-dir" \
"${SPROG} checkout: Updating second-dir
${SPROG} checkout: Updating second-dir/suba
${SPROG} checkout: Updating second-dir/suba/subb" \
"${SPROG} checkout: Updating second-dir"

	  if $remote; then
	    cd second-dir
	    mkdir suba
	    dotest modules3-7-workaround1 "${testcvs} add suba" \
"Directory ${CVSROOT_DIRNAME}/second-dir/suba added to the repository"
	    cd suba
	    mkdir subb
	    dotest modules3-7-workaround2 "${testcvs} add subb" \
"Directory ${CVSROOT_DIRNAME}/second-dir/suba/subb added to the repository"
	    cd ../..
	  fi

	  cd second-dir/suba/subb
	  touch fileb
	  dotest modules3-7c "${testcvs} add fileb" \
"${SPROG} add: scheduling file .fileb. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest modules3-7d "${testcvs} -q ci -m add-it" \
"$CVSROOT_DIRNAME/second-dir/suba/subb/fileb,v  <--  fileb
initial revision: 1\.1"
	  cd ../../..
	  cd ..; rm -r 1

	  mkdir 1
	  cd 1
	  dotest modules3-8 "${testcvs} -q co namednest" \
'U src/sub/dir/file1'
	  dotest modules3-9 "test -f src/sub/dir/file1" ''
	  cd ..
	  rm -r 1

	  # Try the same thing, but with the directories nested even
	  # deeper (deeply enough so they are nested more deeply than
	  # the number of directories from / to ${TESTDIR}).
	  mkdir 1
	  cd 1
	  dotest modules3-10 "${testcvs} -q co nestdeeper" \
'U src/sub1/sub2/sub3/dir/file1'
	  dotest modules3-11 "test -f src/sub1/sub2/sub3/dir/file1" ''

	  # While we are doing things like twisted uses of '/' (e.g.
	  # modules3-12), try this one.
	  if $remote; then
	    dotest_fail modules3-11b \
"${testcvs} -q update ${TESTDIR}/1/src/sub1/sub2/sub3/dir/file1" \
"absolute pathnames invalid for server (specified .${TESTDIR}/1/src/sub1/sub2/sub3/dir.)"
	  fi # end of remote-only tests

	  cd ..
	  rm -r 1

	  # This one is almost too twisted for words.  The pathname output
	  # in the message from "co" doesn't include the "path/in/modules",
	  # but those directories do get created (with no CVSADM except
	  # in "modules" which has a CVSNULLREPOS).
	  # I'm not sure anyone is relying on this nonsense or whether we
	  # need to keep doing it, but it is what CVS currently does...
	  # Skip it for remote; the remote code has the good sense to
	  # not deal with it (on the minus side it gives
	  # "internal error: repository string too short." (CVS 1.9) or
	  # "warning: server is not creating directories one at a time" (now)
	  # instead of a real error).
	  # I'm tempted to just make it a fatal error to have '/' in a
	  # module name.  But see comments at modules3-16.
	  if $remote; then :; else
	    mkdir 1; cd 1
	    dotest modules3-12 "${testcvs} -q co path/in/modules" \
"U first-dir/file1"
	    dotest modules3-13 "test -f path/in/modules/first-dir/file1" ''
	    cd ..; rm -r 1
	  fi # end of tests skipped for remote

	  # Now here is where it used to get seriously bogus.
	  mkdir 1; cd 1
	  dotest modules3-14 \
"${testcvs} -q rtag tag1 path/in/modules" ''
	  # CVS used to create this even though rtag should *never* affect
	  # the directory current when it is called!
	  dotest_fail modules3-15 "test -d path/in/modules" ''
	  # Just for trivia's sake, rdiff was not similarly vulnerable
	  # because it passed 0 for run_module_prog to do_module.
	  cd ..; rm -r 1

	  # Some people seem to want this to work.  I still suspect there
	  # are dark corners in slashes in module names.  This probably wants
	  # more thought before we start hacking on CVS (one way or the other)
	  # or documenting this.
	  mkdir 2; cd 2
	  dotest modules3-16 "${testcvs} -q co another/path/test" \
"U another/path/test/file1"
	  dotest modules3-17 "cat another/path/test/file1" 'file1'

	  dokeep
	  cd ..; rm -r 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir \
			     $CVSROOT_DIRNAME/second-dir
	  ;;



	modules4)
	  # Some tests using the modules file with aliases that
	  # exclude particular directories.

	  mkdir 1; cd 1

	  dotest modules4-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest modules4-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"

	  cd first-dir
          mkdir subdir subdir_long
          dotest modules4-3 "${testcvs} add subdir subdir_long" \
"Directory ${CVSROOT_DIRNAME}/first-dir/subdir added to the repository
Directory ${CVSROOT_DIRNAME}/first-dir/subdir_long added to the repository"

	  echo file1 > file1
	  dotest modules4-4 "${testcvs} add file1" \
"${SPROG}"' add: scheduling file `file1'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'

	  echo file2 > subdir/file2
	  dotest modules4-5 "${testcvs} add subdir/file2" \
"${SPROG}"' add: scheduling file `subdir/file2'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'

	  echo file3 > subdir_long/file3
	  dotest modules4-6 "${testcvs} add subdir_long/file3" \
"${SPROG}"' add: scheduling file `subdir_long/file3'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'

	  dotest modules4-7 "${testcvs} -q ci -m add-it" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/subdir/file2,v  <--  subdir/file2
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/subdir_long/file3,v  <--  subdir_long/file3
initial revision: 1\.1"

	  cd ..

	  dotest modules4-8 "${testcvs} -q update -d CVSROOT" \
"U CVSROOT${DOTSTAR}"
	  cd CVSROOT
	  cat >modules <<EOF
all -a first-dir
some -a !first-dir/subdir first-dir
other -a !first-dir/subdir !first-dir/subdir_long first-dir
somewhat -a first-dir !first-dir/subdir
EOF
	  dotest modules4-9 "${testcvs} -q ci -m add-modules" \
"$CVSROOT_DIRNAME/CVSROOT/modules,v  <--  modules
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  cd ..

	  cd ..
	  mkdir 2; cd 2

	  dotest modules4-10 "${testcvs} -q co all" \
"U first-dir/file1
U first-dir/subdir/file2
U first-dir/subdir_long/file3"
	  rm -r first-dir

	  dotest modules4-11 "${testcvs} -q co some" \
"U first-dir/file1
U first-dir/subdir_long/file3"
	  dotest_fail modules4-12 "test -d first-dir/subdir" ''
	  dotest modules4-13 "test -d first-dir/subdir_long" ''
	  rm -r first-dir

	  if $remote; then
	    # But remote seems to do it the other way.
	    dotest modules4-14r-1 "${testcvs} -q co somewhat" \
"U first-dir/file1
U first-dir/subdir_long/file3"
	    dotest_fail modules4-14r-2 "test -d first-dir/subdir" ''
	    dotest modules4-14r-3 "test -d first-dir/subdir_long" ''
	  else
	    # This is strange behavior, in that the order of the
	    # "!first-dir/subdir" and "first-dir" matter, and it isn't
	    # clear that they should.  I suspect it is long-standing
	    # strange behavior but I haven't verified that.
	    dotest modules4-14-1 "${testcvs} -q co somewhat" \
"U first-dir/file1
U first-dir/subdir/file2
U first-dir/subdir_long/file3"
	    dotest modules4-14-2 "test -d first-dir/subdir" ''
	    dotest modules4-14-3 "test -d first-dir/subdir_long" ''
	  fi
	  rm -r first-dir

	  dotest modules4-15 "${testcvs} -q co other" \
"U first-dir/file1"
	  dotest_fail modules4-16 "test -d first-dir/subdir" ''
	  dotest_fail modules4-17 "test -d first-dir/subdir_long" ''
	  rm -r first-dir

	  cd ..
	  rm -r 2

	  dotest modules4-18 "${testcvs} rtag tag some" \
"${SPROG} rtag: Tagging first-dir
${SPROG} rtag: Ignoring first-dir/subdir
${SPROG} rtag: Tagging first-dir/subdir_long"

	  cd 1/first-dir/subdir
	  dotest modules4-19 "${testcvs} log file2" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/subdir/file2,v
Working file: file2
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
add-it
============================================================================="

	  dokeep
	  cd ../../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	modules5)
	  # Test module programs

	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  mkdir 1
	  cd 1
	  dotest modules5-1 "$testcvs -q co first-dir"
	  cd first-dir
	  mkdir subdir
	  dotest modules5-2 "${testcvs} add subdir" \
"Directory ${CVSROOT_DIRNAME}/first-dir/subdir added to the repository"
	  cd subdir
	  mkdir ssdir
	  dotest modules5-3 "${testcvs} add ssdir" \
"Directory ${CVSROOT_DIRNAME}/first-dir/subdir/ssdir added to the repository"
	  touch a b
	  dotest modules5-4 "${testcvs} add a b" \
"${SPROG} add: scheduling file .a. for addition
${SPROG} add: scheduling file .b. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"

	  dotest modules5-5 "${testcvs} ci -m added" \
"${CPROG} commit: Examining .
${CPROG} commit: Examining ssdir
${CVSROOT_DIRNAME}/first-dir/subdir/a,v  <--  a
initial revision: 1\.1
${CVSROOT_DIRNAME}/first-dir/subdir/b,v  <--  b
initial revision: 1\.1"

	  cd ..
	  dotest modules5-6 "${testcvs} -q co CVSROOT" \
"U CVSROOT/access
U CVSROOT/aclconfig
U CVSROOT/checkoutlist
U CVSROOT/commitinfo
U CVSROOT/config
U CVSROOT/cvswrappers
U CVSROOT/group
U CVSROOT/loginfo
U CVSROOT/modules
U CVSROOT/notify
U CVSROOT/postadmin
U CVSROOT/postproxy
U CVSROOT/posttag
U CVSROOT/postwatch
U CVSROOT/preproxy
U CVSROOT/rcsinfo
U CVSROOT/taginfo
U CVSROOT/verifymsg"

	  # FIXCVS: The sleep in the following script helps avoid out of
	  # order messages, but we really need to figure out how to fix
	  # cvs to prevent them in the first place.
	  for i in checkout export tag; do
	    cat >> ${CVSROOT_DIRNAME}/$i.sh <<EOF
#! $TESTSHELL
sleep 1
echo "$i script invoked in \`pwd\`"
echo "args: \$@"
EOF
	    # Cygwin doesn't set premissions correctly over the Samba share.
	    if test -n "$remotehost"; then
	      $CVS_RSH $remotehost "chmod +x ${CVSROOT_DIRNAME}/$i.sh"
	    else
	      chmod +x ${CVSROOT_DIRNAME}/$i.sh
	    fi
	  done

	  OPTS="-o${CVSROOT_DIRNAME}/checkout.sh -e ${CVSROOT_DIRNAME}/export.sh -t${CVSROOT_DIRNAME}/tag.sh"
	  cat >CVSROOT/modules <<EOF
realmodule ${OPTS} first-dir/subdir a
dirmodule ${OPTS} first-dir/subdir
namedmodule -d nameddir ${OPTS} first-dir/subdir
EOF

	  dotest modules5-7 "$testcvs -Q ci -m 'add modules' CVSROOT/modules"

	  cd ..
	  rm -rf first-dir

	  # Test that real modules check out to realmodule/a, not subdir/a.
	  if $remote; then
	    # FIXCVS?
	    # Mac OSX 10.3 (Darwin ppc-osx1 5.5) fails here when $TMPDIR
	    # contains a symlink (it does not fail the local modules5-8).
	    # Since no other platforms are exhibiting the same problem, I
	    # suspect an issue with OSX and fork() or the like dereferencing
	    # the symlink, but it is possible it is something that could be
	    # fixed or worked around in CVS.
	    dotest modules5-8r "$testcvs co realmodule" \
"U realmodule/a
${SPROG} checkout: Executing ..${CVSROOT_DIRNAME}/checkout\.sh. .realmodule..
checkout script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: realmodule"
	  else
	    dotest modules5-8 "${testcvs} co realmodule" \
"U realmodule/a
${SPROG} checkout: Executing ..${CVSROOT_DIRNAME}/checkout\.sh. .realmodule..
checkout script invoked in ${TESTDIR}/1
args: realmodule"
	  fi
	  dotest modules5-9 "test -d realmodule && test -f realmodule/a" ""
	  dotest_fail modules5-10 "test -f realmodule/b" ""
	  if $remote; then
	    dotest modules5-11 "${testcvs} -q co realmodule" \
"checkout script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: realmodule"
	    dotest modules5-12 "${testcvs} -q update" ''
	    echo "change" >>realmodule/a
	    dotest modules5-13 "${testcvs} -q ci -m." \
"$CVSROOT_DIRNAME/first-dir/subdir/a,v  <--  realmodule/a
new revision: 1\.2; previous revision: 1\.1"
	  else
	    dotest modules5-11 "${testcvs} -q co realmodule" \
"checkout script invoked in ${TESTDIR}/1
args: realmodule"
	    dotest modules5-12 "${testcvs} -q update" ''
	    echo "change" >>realmodule/a
	    dotest modules5-13 "${testcvs} -q ci -m." \
"$CVSROOT_DIRNAME/first-dir/subdir/a,v  <--  realmodule/a
new revision: 1\.2; previous revision: 1\.1"
	  fi
	  dotest modules5-14 "echo yes | ${testcvs} release -d realmodule" \
"You have \[0\] altered files in this repository\.
Are you sure you want to release (and delete) directory .realmodule.: "
	  dotest modules5-15 "${testcvs} -q rtag -Dnow MYTAG realmodule" \
"tag script invoked in ${TESTDIR}/1
args: realmodule MYTAG" \
"tag script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: realmodule MYTAG"
	  if $remote; then
	    dotest modules5-16 "${testcvs} -q export -r MYTAG realmodule" \
"U realmodule/a
export script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: realmodule"
	  else
	    dotest modules5-16 "${testcvs} -q export -r MYTAG realmodule" \
"U realmodule/a
export script invoked in ${TESTDIR}/1
args: realmodule"
	  fi
	  rm -r realmodule

	  dotest_fail modules5-17 "${testcvs} co realmodule/a" \
"${SPROG}"' checkout: module `realmodule/a'\'' is a request for a file in a module which is not a directory' \
"${SPROG}"' server: module `realmodule/a'\'' is a request for a file in a module which is not a directory
'"${CPROG}"' \[checkout aborted\]: cannot expand modules'

	  # Now test the ability to check out a single file from a directory
	  if $remote; then
	    dotest modules5-18 "${testcvs} co dirmodule/a" \
"U dirmodule/a
${SPROG} checkout: Executing ..${CVSROOT_DIRNAME}/checkout\.sh. .dirmodule..
checkout script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: dirmodule"
	  else
	    dotest modules5-18 "${testcvs} co dirmodule/a" \
"U dirmodule/a
${SPROG} checkout: Executing ..${CVSROOT_DIRNAME}/checkout\.sh. .dirmodule..
checkout script invoked in ${TESTDIR}/1
args: dirmodule"
	  fi
	  dotest modules5-19 "test -d dirmodule && test -f dirmodule/a" ""
	  dotest_fail modules5-20 "test -f dirmodule/b" ""
	  dotest modules5-21 "echo yes | ${testcvs} release -d dirmodule" \
"You have \[0\] altered files in this repository\.
Are you sure you want to release (and delete) directory .dirmodule.: "

	  # Now test the ability to correctly reject a non-existent filename.
	  # For maximum studliness we would check that an error message is
	  # being output.
	  # We accept a zero exit status because it is what CVS does
	  # (Dec 95).  Probably the exit status should be nonzero,
	  # however.
	  if $remote; then
	    dotest modules5-22 "${testcvs} co dirmodule/nonexist" \
"${SPROG} checkout: warning: new-born \`dirmodule/nonexist' has disappeared
${SPROG} checkout: Executing ..${CVSROOT_DIRNAME}/checkout\.sh. .dirmodule..
checkout script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: dirmodule"
	  else
	    dotest modules5-22 "${testcvs} co dirmodule/nonexist" \
"${SPROG} checkout: warning: new-born \`dirmodule/nonexist' has disappeared
${SPROG} checkout: Executing ..${CVSROOT_DIRNAME}/checkout\.sh. .dirmodule..
checkout script invoked in ${TESTDIR}/1
args: dirmodule"
	  fi
	  # We tolerate the creation of the dirmodule directory, since that
	  # is what CVS does, not because we view that as preferable to not
	  # creating it.
	  dotest_fail modules5-23 "test -f dirmodule/a || test -f dirmodule/b" ""
	  rm -r dirmodule

	  # Now test that a module using -d checks out to the specified
	  # directory.
	  if $remote; then
	    dotest modules5-24 "${testcvs} -q co namedmodule" \
"U nameddir/a
U nameddir/b
checkout script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: nameddir"
	  else
	    dotest modules5-24 "${testcvs} -q co namedmodule" \
"U nameddir/a
U nameddir/b
checkout script invoked in ${TESTDIR}/1
args: nameddir"
	  fi
	  dotest modules5-25 "test -f nameddir/a && test -f nameddir/b" ""
	  echo add line >>nameddir/a
	  # This seems suspicious: when we checkout an existing directory,
	  # the checkout script gets executed in addition to the update
	  # script.  Is that by design or accident?
	  if $remote; then
	    dotest modules5-26 "${testcvs} -q co namedmodule" \
"M nameddir/a
checkout script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: nameddir"
	  else
	    dotest modules5-26 "${testcvs} -q co namedmodule" \
"M nameddir/a
checkout script invoked in ${TESTDIR}/1
args: nameddir"
	  fi
	  rm nameddir/a

	  if $remote; then
	    dotest modules5-27 "${testcvs} -q co namedmodule" \
"U nameddir/a
checkout script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: nameddir"
	  else
	    dotest modules5-27 "${testcvs} -q co namedmodule" \
"U nameddir/a
checkout script invoked in ${TESTDIR}/1
args: nameddir"
	  fi
	  dotest modules5-28 "echo yes | ${testcvs} release -d nameddir" \
"You have \[0\] altered files in this repository\.
Are you sure you want to release (and delete) directory .nameddir.: "

	  # Now try the same tests with -d on command line
	  # FIXCVS?  The manual says the modules programs get the module name,
	  # but they really get the directory name.
	  if $remote; then
	    dotest modules5-29 "${testcvs} co -d mydir realmodule" \
"U mydir/a
${SPROG} checkout: Executing ..${CVSROOT_DIRNAME}/checkout\.sh. .mydir..
checkout script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: mydir"
	  else
	    dotest modules5-29 "${testcvs} co -d mydir realmodule" \
"U mydir/a
${SPROG} checkout: Executing ..${CVSROOT_DIRNAME}/checkout\.sh. .mydir..
checkout script invoked in ${TESTDIR}/1
args: mydir"
	  fi
	  dotest modules5-30 "test -d mydir && test -f mydir/a" ""
	  dotest_fail modules5-31 "test -d realmodule || test -f mydir/b" ""
	  if $remote; then
	    dotest modules5-32 "${testcvs} -q co -d mydir realmodule" \
"checkout script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: mydir"
	    dotest modules5-33 "${testcvs} -q update" ''
	    echo "change" >>mydir/a
	    dotest modules5-34 "${testcvs} -q ci -m." \
"$CVSROOT_DIRNAME/first-dir/subdir/a,v  <--  mydir/a
new revision: 1\.3; previous revision: 1\.2"
	  else
	    dotest modules5-32 "${testcvs} -q co -d mydir realmodule" \
"checkout script invoked in ${TESTDIR}/1
args: mydir"
	    dotest modules5-33 "${testcvs} -q update" ''
	    echo "change" >>mydir/a
	    dotest modules5-34 "${testcvs} -q ci -m." \
"$CVSROOT_DIRNAME/first-dir/subdir/a,v  <--  mydir/a
new revision: 1\.3; previous revision: 1\.2"
	  fi
	  dotest modules5-35 "echo yes | ${testcvs} release -d mydir" \
"You have \[0\] altered files in this repository\.
Are you sure you want to release (and delete) directory .mydir.: "
	  if $remote; then
	    dotest modules5-36 "${testcvs} -q rtag -Dnow MYTAG2 realmodule" \
"tag script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: realmodule MYTAG2"
	    dotest modules5-37 "${testcvs} -q export -r MYTAG2 -d mydir realmodule" \
"U mydir/a
export script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: mydir"
	  else
	    dotest modules5-36 "${testcvs} -q rtag -Dnow MYTAG2 realmodule" \
"tag script invoked in ${TESTDIR}/1
args: realmodule MYTAG2"
	    dotest modules5-37 "${testcvs} -q export -r MYTAG2 -d mydir realmodule" \
"U mydir/a
export script invoked in ${TESTDIR}/1
args: mydir"
	  fi
	  rm -r mydir

	  # Now test the ability to check out a single file from a directory
	  if $remote; then
	    dotest modules5-38 "${testcvs} co -d mydir dirmodule/a" \
"U mydir/a
${SPROG} checkout: Executing ..${CVSROOT_DIRNAME}/checkout\.sh. .mydir..
checkout script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: mydir"
	  else
	    dotest modules5-38 "${testcvs} co -d mydir dirmodule/a" \
"U mydir/a
${SPROG} checkout: Executing ..${CVSROOT_DIRNAME}/checkout\.sh. .mydir..
checkout script invoked in ${TESTDIR}/1
args: mydir"
	  fi
	  dotest modules5-39 "test -d mydir && test -f mydir/a" ""
	  dotest_fail modules5-40 "test -d dirmodule || test -f mydir/b" ""
	  dotest modules5-41 "echo yes | ${testcvs} release -d mydir" \
"You have \[0\] altered files in this repository\.
Are you sure you want to release (and delete) directory .mydir.: "

	  # Now test the ability to correctly reject a non-existent filename.
	  # For maximum studliness we would check that an error message is
	  # being output.
	  # We accept a zero exit status because it is what CVS does
	  # (Dec 95).  Probably the exit status should be nonzero,
	  # however.
	  if $remote; then
	    dotest modules5-42 "${testcvs} co -d mydir dirmodule/nonexist" \
"${SPROG} checkout: warning: new-born \`mydir/nonexist' has disappeared
${SPROG} checkout: Executing ..${CVSROOT_DIRNAME}/checkout\.sh. .mydir..
checkout script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: mydir"
	  else
	    dotest modules5-42 "${testcvs} co -d mydir dirmodule/nonexist" \
"${SPROG} checkout: warning: new-born \`mydir/nonexist' has disappeared
${SPROG} checkout: Executing ..${CVSROOT_DIRNAME}/checkout\.sh. .mydir..
checkout script invoked in ${TESTDIR}/1
args: mydir"
	  fi
	  # We tolerate the creation of the mydir directory, since that
	  # is what CVS does, not because we view that as preferable to not
	  # creating it.
	  dotest_fail modules5-43 "test -f mydir/a || test -f mydir/b" ""
	  rm -r mydir

	  if $remote; then
	    dotest modules5-44 "${testcvs} -q co -d mydir namedmodule" \
"U mydir/a
U mydir/b
checkout script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: mydir"
	  else
	    dotest modules5-44 "${testcvs} -q co -d mydir namedmodule" \
"U mydir/a
U mydir/b
checkout script invoked in ${TESTDIR}/1
args: mydir"
	  fi
	  dotest modules5-45 "test -f mydir/a && test -f mydir/b" ""
	  dotest_fail modules5-46 "test -d namedir"
	  echo add line >>mydir/a
	  # This seems suspicious: when we checkout an existing directory,
	  # the checkout script gets executed in addition to the update
	  # script.  Is that by design or accident?
	  if $remote; then
	    dotest modules5-47 "${testcvs} -q co -d mydir namedmodule" \
"M mydir/a
checkout script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: mydir"
	  else
	    dotest modules5-47 "${testcvs} -q co -d mydir namedmodule" \
"M mydir/a
checkout script invoked in ${TESTDIR}/1
args: mydir"
	  fi
	  rm mydir/a

	  if $remote; then
	    dotest modules5-48 "${testcvs} -q co -d mydir namedmodule" \
"U mydir/a
checkout script invoked in ${TMPDIR}/cvs-serv[0-9a-z]*
args: mydir"
	  else
	    dotest modules5-48 "${testcvs} -q co -d mydir namedmodule" \
"U mydir/a
checkout script invoked in ${TESTDIR}/1
args: mydir"
	  fi
	  dotest modules5-49 "echo yes | ${testcvs} release -d mydir" \
"You have \[0\] altered files in this repository\.
Are you sure you want to release (and delete) directory .mydir.: "

	  dokeep
	  cd ..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir \
			     $CVSROOT_DIRNAME/*.sh
	  ;;



	modules6)
	  #
	  # Test invalid module definitions
	  #
	  # See the header comment for the `modules' test for an index of
	  # the complete suite of modules tests.
	  #

	  #
	  # There was a bug in CVS through 1.11.1p1 where a bad module name
	  # would cause the previous line to be parsed as the module
	  # definition.  This test proves this doesn't happen anymore.
	  #
	  mkdir modules6
	  cd modules6
	  dotest module6-setup-1 "${testcvs} -Q co CVSROOT" ""
	  cd CVSROOT
	  echo "longmodulename who cares" >modules
	  echo "badname" >>modules
	  # This test almost isn't setup since it generates the error message
	  # we are looking for if `-Q' isn't specified, but I want to test the
	  # filename in the message later.
	  dotest modules6-setup-2 "$testcvs -Q ci -mbad-modules"

	  # Here's where CVS would report not being able to find `lename'
	  cd ..
	  dotest_fail modules6-1 "${testcvs} -q co badname" \
"${SPROG} checkout: warning: NULL value for key .badname. at line 2 of .${CVSROOT_DIRNAME}/CVSROOT/modules.
${SPROG} checkout: cannot find module .badname. - ignored" \
"${SPROG} server: warning: NULL value for key .badname. at line 2 of .${CVSROOT_DIRNAME}/CVSROOT/modules.
${SPROG} server: cannot find module .badname. - ignored
${CPROG} \[checkout aborted\]: cannot expand modules"

	  dokeep
	  restore_adm
	  cd ..
	  rm -r modules6
	  ;;



	modules7)
	  #
	  # Test tag problems vs an empty CVSROOT/val-tags file
	  #
	  # See the header comment for the `modules' test for an index of
	  # the complete suite of modules tests.
	  #
	  mkdir modules7
	  cd modules7
	  dotest modules7-1 "$testcvs -Q co -d top ."
	  cd top
	  mkdir zero one
	  dotest modules7-2 "$testcvs -Q add zero one"
	  cd one
	  echo 'file1 contents' > file1
	  dotest modules7-2 "$testcvs -Q add file1"
	  dotest modules7-3 "$testcvs -Q ci -mnew file1"
	  dotest modules7-4 "$testcvs -Q tag mytag file1"
	  cd ../CVSROOT
	  echo 'all -a zero one' > modules
	  dotest modules7-5 "$testcvs -Q ci -mall-module"
	  cd ../..
	  mkdir myexport
	  cd myexport

	  # This failed prior to CVS version 1.12.10.
	  dotest modules7-7 "$testcvs export -rmytag all" \
"$SPROG export: Updating zero
$SPROG export: Updating one
U one/file1"
	  dotest modules7-8 'cat one/file1' 'file1 contents'

	  dokeep

	  # cleanup
	  restore_adm
	  cd ../..
	  rm -fr modules7
	  rm -rf $CVSROOT_DIRNAME/zero $CVSROOT_DIRNAME/one
	  ;;



	mkmodules)
	  # When a file listed in checkoutlist doesn't exist, cvs-1.10.4
	  # would fail to remove the CVSROOT/.#[0-9]* temporary file it
	  # creates while mkmodules is in the process of trying to check
	  # out the missing file.

	  mkdir 1; cd 1
	  dotest mkmodules-temp-file-removal-1 "${testcvs} -Q co CVSROOT" ''
	  cd CVSROOT
	  echo no-such-file >> checkoutlist
	  dotest mkmodules-temp-file-removal-2 "$testcvs -Q ci -m. checkoutlist"

	  dotest mkmodules-temp-file-removal-3 \
"echo $CVSROOT_DIRNAME/CVSROOT/.#[0-9]*" \
"$CVSROOT_DIRNAME/CVSROOT/\.#\[0-9\]\*"

	  # Versions 1.11.6 & 1.12.1 and earlier of CVS printed most of the
	  # white space included before error messages in checkoutlist.
	  echo "no-such-file     Failed to update no-such-file." >checkoutlist
	  dotest mkmodules-error-message-1 "$testcvs -Q ci -m. checkoutlist" \
"$SPROG commit: Failed to update no-such-file\."

	  # Versions 1.11.6 & 1.12.1 and earlier of CVS used the error string
	  # from the checkoutlist file as the format string passed to error()'s
	  # printf.  Check that this is no longer the case by verifying that
	  # printf format patterns remain unchanged.
	  echo "no-such-file     Failed to update %s %lx times because %s happened %d times." >checkoutlist
	  dotest mkmodules-error-message-2 "$testcvs -Q ci -m. checkoutlist" \
"$SPROG commit: Failed to update %s %lx times because %s happened %d times\."

	  dotest mkmodules-cleanup-1 \
"$testcvs -Q up -pr1.1 checkoutlist >checkoutlist"
	  dotest mkmodules-cleanup-2 "$testcvs -Q ci -m. checkoutlist"

	  dokeep
	  cd ../..
	  rm -r 1
	  ;;



	co-d)
	  # Some tests of various permutations of co-d when directories exist
	  # and checkouts lengthen.
	  #
	  # Interestingly enough, these same tests pass when the directory
	  # lengthening happens via the modules file.  Go figure.
	  module=co-d
	  mkdir $module; cd $module
	  mkdir top; cd top
	  dotest co-d-init-1 "$testcvs -Q co -l ."
	  mkdir $module
	  dotest co-d-init-2 "$testcvs -Q add $module"
	  cd $module
	  echo content >file1
	  echo different content >file2
	  dotest co-d-init-3 "$testcvs -Q add file1 file2"
	  dotest co-d-init-4 "$testcvs -Q ci -madd-em"
	  cd ../..

	  mkdir 2; cd 2
	  dotest co-d-1 "$testcvs -q co -d dir $module" \
"U dir/file1
U dir/file2"
	  dotest co-d-1.2 "cat dir/CVS/Repository" "$module"

	  dotest co-d-2 "$testcvs -q co -d dir2/sdir $module" \
"U dir2/sdir/file1
U dir2/sdir/file2"
	  dotest co-d-2.2 "cat dir2/CVS/Repository" "."
	  dotest co-d-2.3 "cat dir2/sdir/CVS/Repository" "$module"

	  dotest co-d-2.4 "$testcvs -q co -d dir2.4/sdir/sdir2 $module" \
"U dir2.4/sdir/sdir2/file1
U dir2.4/sdir/sdir2/file2"
	  dotest co-d-2.4.2 "cat dir2.4/CVS/Repository" "CVSROOT/Emptydir"
	  dotest co-d-2.4.3 "cat dir2.4/sdir/CVS/Repository" "."
	  dotest co-d-2.4.3 "cat dir2.4/sdir/sdir2/CVS/Repository" "$module"

	  mkdir dir3
	  dotest co-d-3 "$testcvs -q co -d dir3 $module" \
"U dir3/file1
U dir3/file2"
	  dotest co-d-3.2 "cat dir3/CVS/Repository" "$module"

	  mkdir dir4
	  dotest co-d-4 "$testcvs -q co -d dir4/sdir $module" \
"U dir4/sdir/file1
U dir4/sdir/file2"

	  # CVS is only supposed to create administration directories in
	  # directories it also creates, and in the directory specified by
	  # the last portion of the path passed to -d regardless.  This is
	  #
	  # FIXCVS:
	  # This is broken in client/server mode because the server does not
	  # know the client's directory structure and has to create
	  # everything.
	  if $remote; then
	    dotest co-d-4.2r "cat dir4/CVS/Repository" "."
	  else
	    dotest_fail co-d-4.2 "test -d dir4/CVS"
	  fi

	  dotest co-d-4.3 "cat dir4/sdir/CVS/Repository" "$module"

	  mkdir dir5
	  mkdir dir5/sdir
	  dotest co-d-5 "$testcvs -q co -d dir5/sdir $module" \
"U dir5/sdir/file1
U dir5/sdir/file2"
	    # FIXCVS as for co-d-4.2r.
	  if $remote; then
	    dotest co-d-5.2 "cat dir5/CVS/Repository" "."
	  else
	    dotest_fail co-d-5.2 "test -d dir5/CVS"
	  fi

	  dotest co-d-5.3 "cat dir5/sdir/CVS/Repository" "$module"

	  # clean up
	  dokeep
	  cd ../..
	  modify_repo rm -rf $CVSROOT_DIRNAME/$module
	  rm -r $module
	  ;;



	cvsadm)
	  # These test check the content of CVS' administrative
	  # files as they are checked out in various configurations.
	  # (As a side note, I'm not using the "-q" flag in any of
	  # this code, which should provide some extra checking for
          # those messages which don't seem to be checked thoroughly
	  # anywhere else.)  To do a thorough test, we need to make
	  # a bunch of modules in various configurations.
	  #
	  # <1mod> is a directory at the top level of cvsroot
	  #    ``foo bar''
	  # <2mod> is a directory at the second level of cvsroot
	  #    ``foo bar/baz''
	  # <1d1mod> is a directory at the top level which is
	  #   checked out into another directory
	  #     ``foo -d bar baz''
	  # <1d2mod> is a directory at the second level which is
	  #   checked out into another directory
	  #     ``foo -d bar baz/quux''
	  # <2d1mod> is a directory at the top level which is
	  #   checked out into a directory that is two deep
	  #     ``foo -d bar/baz quux''
	  # <2d2mod> is a directory at the second level which is
	  #   checked out into a directory that is two deep
	  #     ``foo -d bar/baz quux''
	  #
	  # The tests do each of these types separately and in twos.
	  # We also repeat each test -d flag for 1-deep and 2-deep
	  # directories.
	  #
	  # Each test should check the output for the Repository
	  # file, since that is the one which varies depending on 
	  # the directory and how it was checked out.
	  #
	  # Yes, this is verbose, but at least it's very thorough.

	  # convenience variables
	  REP=${CVSROOT}

	  # First, set TopLevelAdmin=yes so we're sure to get
	  # top-level CVS directories.
	  mkdir 1; cd 1
	  dotest cvsadm-setup-1 "${testcvs} -q co CVSROOT/config" \
"U CVSROOT/config"
	  cd CVSROOT
	  echo "TopLevelAdmin=yes" >>config
	  dotest cvsadm-setup-2 "${testcvs} -q ci -m yes-top-level" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  cd ../..
	  rm -r 1

	  # Second, check out the modules file and edit it.
	  mkdir 1; cd 1
	  dotest cvsadm-1 "${testcvs} co CVSROOT/modules" \
"U CVSROOT/modules"

	  # Test CVS/Root once.  Since there is only one part of
	  # the code which writes CVS/Root files (Create_Admin),
	  # there is no point in testing this every time.
	  dotest cvsadm-1a "cat CVS/Root" ${REP}
	  dotest cvsadm-1b "cat CVS/Repository" "\."
	  dotest cvsadm-1c "cat CVSROOT/CVS/Root" ${REP}
	  dotest cvsadm-1d "cat CVSROOT/CVS/Repository" "CVSROOT"
          # All of the defined module names begin with a number.
	  # All of the top-level directory names begin with "dir".
	  # All of the subdirectory names begin with "sub".
	  # All of the top-level modules begin with "mod".
	  echo "# Module defs for cvsadm tests" > CVSROOT/modules
	  echo "1mod mod1" >> CVSROOT/modules
	  echo "1mod-2 mod1-2" >> CVSROOT/modules
	  echo "2mod mod2/sub2" >> CVSROOT/modules
	  echo "2mod-2 mod2-2/sub2-2" >> CVSROOT/modules
	  echo "1d1mod -d dir1d1 mod1" >> CVSROOT/modules
	  echo "1d1mod-2 -d dir1d1-2 mod1-2" >> CVSROOT/modules
	  echo "1d2mod -d dir1d2 mod2/sub2" >> CVSROOT/modules
	  echo "1d2mod-2 -d dir1d2-2 mod2-2/sub2-2" >> CVSROOT/modules
	  echo "2d1mod -d dir2d1/sub2d1 mod1" >> CVSROOT/modules
	  echo "2d1mod-2 -d dir2d1-2/sub2d1-2 mod1-2" >> CVSROOT/modules
	  echo "2d2mod -d dir2d2/sub2d2 mod2/sub2" >> CVSROOT/modules
	  echo "2d2mod-2 -d dir2d2-2/sub2d2-2 mod2-2/sub2-2" >> CVSROOT/modules
	  dotest cvsadm-1e "${testcvs} ci -m add-modules" \
"${CPROG} commit: Examining .
${CPROG} commit: Examining CVSROOT
${CVSROOT_DIRNAME}/CVSROOT/modules,v  <--  CVSROOT/modules
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
${SPROG} commit: Rebuilding administrative file database" \
"${CPROG} commit: Examining .
${CPROG} commit: Examining CVSROOT"
	  rm -rf CVS CVSROOT;

	  # Create the various modules
	  dotest cvsadm-2 "${testcvs} -q co -l ." ''
	  mkdir mod1
	  mkdir mod1-2
	  mkdir mod2
	  mkdir mod2/sub2
	  mkdir mod2-2
	  mkdir mod2-2/sub2-2
	  dotest cvsadm-2a "${testcvs} add mod1 mod1-2 mod2 mod2/sub2 mod2-2 mod2-2/sub2-2" \
"Directory ${CVSROOT_DIRNAME}/mod1 added to the repository
Directory ${CVSROOT_DIRNAME}/mod1-2 added to the repository
Directory ${CVSROOT_DIRNAME}/mod2 added to the repository
Directory ${CVSROOT_DIRNAME}/mod2/sub2 added to the repository
Directory ${CVSROOT_DIRNAME}/mod2-2 added to the repository
Directory ${CVSROOT_DIRNAME}/mod2-2/sub2-2 added to the repository"

	  # Populate the directories for the halibut
	  echo "file1" > mod1/file1
	  echo "file1-2" > mod1-2/file1-2
	  echo "file2" > mod2/sub2/file2
	  echo "file2-2" > mod2-2/sub2-2/file2-2
	  dotest cvsadm-2aa "${testcvs} add mod1/file1 mod1-2/file1-2 mod2/sub2/file2 mod2-2/sub2-2/file2-2" \
"${SPROG} add: scheduling file .mod1/file1. for addition
${SPROG} add: scheduling file .mod1-2/file1-2. for addition
${SPROG} add: scheduling file .mod2/sub2/file2. for addition
${SPROG} add: scheduling file .mod2-2/sub2-2/file2-2. for addition
${SPROG} add: use \`${SPROG} commit' to add these files permanently"

	  dotest cvsadm-2b "${testcvs} ci -m yup mod1 mod1-2 mod2 mod2-2" \
"${CPROG} commit: Examining mod1
${CPROG} commit: Examining mod1-2
${CPROG} commit: Examining mod2
${CPROG} commit: Examining mod2/sub2
${CPROG} commit: Examining mod2-2
${CPROG} commit: Examining mod2-2/sub2-2
${CVSROOT_DIRNAME}/mod1/file1,v  <--  mod1/file1
initial revision: 1.1
${CVSROOT_DIRNAME}/mod1-2/file1-2,v  <--  mod1-2/file1-2
initial revision: 1.1
${CVSROOT_DIRNAME}/mod2/sub2/file2,v  <--  mod2/sub2/file2
initial revision: 1.1
${CVSROOT_DIRNAME}/mod2-2/sub2-2/file2-2,v  <--  mod2-2/sub2-2/file2-2
initial revision: 1.1"
	  # Finished creating the modules -- clean up.
	  rm -rf CVS mod1 mod1-2 mod2 mod2-2
	  # Done.

	  ##################################################
	  ## Start the dizzying array of possibilities.
	  ## Begin with each module type separately.
	  ##################################################
	  
	  # Pattern -- after each checkout, first check the top-level
	  # CVS directory.  Then, check the directories in numerical
	  # order.

	  dotest cvsadm-3 "${testcvs} co 1mod" \
"${SPROG} checkout: Updating 1mod
U 1mod/file1"
	  dotest cvsadm-3b "cat CVS/Repository" "\."
	  dotest cvsadm-3d "cat 1mod/CVS/Repository" "mod1"
	  rm -rf CVS 1mod

	  dotest cvsadm-4 "${testcvs} co 2mod" \
"${SPROG} checkout: Updating 2mod
U 2mod/file2"
	  dotest cvsadm-4b "cat CVS/Repository" "\."
	  dotest cvsadm-4d "cat 2mod/CVS/Repository" "mod2/sub2"
	  rm -rf CVS 2mod

	  dotest cvsadm-5 "${testcvs} co 1d1mod" \
"${SPROG} checkout: Updating dir1d1
U dir1d1/file1"
	  dotest cvsadm-5b "cat CVS/Repository" "\."
	  dotest cvsadm-5d "cat dir1d1/CVS/Repository" "mod1"
	  rm -rf CVS dir1d1

	  dotest cvsadm-6 "${testcvs} co 1d2mod" \
"${SPROG} checkout: Updating dir1d2
U dir1d2/file2"
	  dotest cvsadm-6b "cat CVS/Repository" "\."
	  dotest cvsadm-6d "cat dir1d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir1d2

	  dotest cvsadm-7 "${testcvs} co 2d1mod" \
"${SPROG} checkout: Updating dir2d1/sub2d1
U dir2d1/sub2d1/file1"
	  dotest cvsadm-7b "cat CVS/Repository" "\."
	  dotest cvsadm-7d "cat dir2d1/CVS/Repository" "\."
	  dotest cvsadm-7f "cat dir2d1/sub2d1/CVS/Repository" "mod1"
	  rm -rf CVS dir2d1

	  dotest cvsadm-8 "${testcvs} co 2d2mod" \
"${SPROG} checkout: Updating dir2d2/sub2d2
U dir2d2/sub2d2/file2"
	  dotest cvsadm-8b "cat CVS/Repository" "\."
	  dotest cvsadm-8d "cat dir2d2/CVS/Repository" "mod2"
	  dotest cvsadm-8f "cat dir2d2/sub2d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir2d2

	  ##################################################
	  ## You are in a shell script of twisted little
	  ## module combination statements, all alike.
	  ##################################################

	  ### 1mod
	  
	  dotest cvsadm-9 "${testcvs} co 1mod 1mod-2" \
"${SPROG} checkout: Updating 1mod
U 1mod/file1
${SPROG} checkout: Updating 1mod-2
U 1mod-2/file1-2"
	  # the usual for the top level
	  dotest cvsadm-9b "cat CVS/Repository" "\."
	  # the usual for 1mod
	  dotest cvsadm-9d "cat 1mod/CVS/Repository" "mod1"
	  # the usual for 1mod copy
	  dotest cvsadm-9f "cat 1mod-2/CVS/Repository" "mod1-2"
	  rm -rf CVS 1mod 1mod-2

	  # 1mod 2mod redmod bluemod
	  dotest cvsadm-10 "${testcvs} co 1mod 2mod" \
"${SPROG} checkout: Updating 1mod
U 1mod/file1
${SPROG} checkout: Updating 2mod
U 2mod/file2"
	  # the usual for the top level
	  dotest cvsadm-10b "cat CVS/Repository" "\."
	  # the usual for 1mod
	  dotest cvsadm-10d "cat 1mod/CVS/Repository" "mod1"
	  # the usual for 2dmod
	  dotest cvsadm-10f "cat 2mod/CVS/Repository" "mod2/sub2"
	  rm -rf CVS 1mod 2mod

	  dotest cvsadm-11 "${testcvs} co 1mod 1d1mod" \
"${SPROG} checkout: Updating 1mod
U 1mod/file1
${SPROG} checkout: Updating dir1d1
U dir1d1/file1"
	  # the usual for the top level
	  dotest cvsadm-11b "cat CVS/Repository" "\."
	  # the usual for 1mod
	  dotest cvsadm-11d "cat 1mod/CVS/Repository" "mod1"
	  # the usual for 1d1mod
	  dotest cvsadm-11f "cat dir1d1/CVS/Repository" "mod1"
	  rm -rf CVS 1mod dir1d1

	  dotest cvsadm-12 "${testcvs} co 1mod 1d2mod" \
"${SPROG} checkout: Updating 1mod
U 1mod/file1
${SPROG} checkout: Updating dir1d2
U dir1d2/file2"
	  # the usual for the top level
	  dotest cvsadm-12b "cat CVS/Repository" "\."
	  # the usual for 1mod
	  dotest cvsadm-12d "cat 1mod/CVS/Repository" "mod1"
	  # the usual for 1d2mod
	  dotest cvsadm-12f "cat dir1d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS 1mod dir1d2

	  dotest cvsadm-13 "${testcvs} co 1mod 2d1mod" \
"${SPROG} checkout: Updating 1mod
U 1mod/file1
${SPROG} checkout: Updating dir2d1/sub2d1
U dir2d1/sub2d1/file1"
	  # the usual for the top level
	  dotest cvsadm-13b "cat CVS/Repository" "\."
	  # the usual for 1mod
	  dotest cvsadm-13d "cat 1mod/CVS/Repository" "mod1"
	  # the usual for 2d1mod
	  dotest cvsadm-13f "cat dir2d1/CVS/Repository" "\."
	  dotest cvsadm-13h "cat dir2d1/sub2d1/CVS/Repository" "mod1"
	  rm -rf CVS 1mod dir2d1

	  dotest cvsadm-14 "${testcvs} co 1mod 2d2mod" \
"${SPROG} checkout: Updating 1mod
U 1mod/file1
${SPROG} checkout: Updating dir2d2/sub2d2
U dir2d2/sub2d2/file2"
	  # the usual for the top level
	  dotest cvsadm-14b "cat CVS/Repository" "\."
	  # the usual for 1mod
	  dotest cvsadm-14d "cat 1mod/CVS/Repository" "mod1"
	  # the usual for 2d2mod
	  dotest cvsadm-14f "cat dir2d2/CVS/Repository" "mod2"
	  dotest cvsadm-14h "cat dir2d2/sub2d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS 1mod dir2d2


	  ### 2mod
	  
	  dotest cvsadm-15 "${testcvs} co 2mod 2mod-2" \
"${SPROG} checkout: Updating 2mod
U 2mod/file2
${SPROG} checkout: Updating 2mod-2
U 2mod-2/file2-2"
	  # the usual for the top level
	  dotest cvsadm-15b "cat CVS/Repository" "\."
	  # the usual for 2mod
	  dotest cvsadm-15d "cat 2mod/CVS/Repository" "mod2/sub2"
	  # the usual for 2mod copy
	  dotest cvsadm-15f "cat 2mod-2/CVS/Repository" "mod2-2/sub2-2"
	  rm -rf CVS 2mod 2mod-2


	  dotest cvsadm-16 "${testcvs} co 2mod 1d1mod" \
"${SPROG} checkout: Updating 2mod
U 2mod/file2
${SPROG} checkout: Updating dir1d1
U dir1d1/file1"
	  # the usual for the top level
	  dotest cvsadm-16b "cat CVS/Repository" "\."
	  # the usual for 2mod
	  dotest cvsadm-16d "cat 2mod/CVS/Repository" "mod2/sub2"
	  # the usual for 1d1mod
	  dotest cvsadm-16f "cat dir1d1/CVS/Repository" "mod1"
	  rm -rf CVS 2mod dir1d1

	  dotest cvsadm-17 "${testcvs} co 2mod 1d2mod" \
"${SPROG} checkout: Updating 2mod
U 2mod/file2
${SPROG} checkout: Updating dir1d2
U dir1d2/file2"
	  # the usual for the top level
	  dotest cvsadm-17b "cat CVS/Repository" "\."
	  # the usual for 2mod
	  dotest cvsadm-17d "cat 2mod/CVS/Repository" "mod2/sub2"
	  # the usual for 1d2mod
	  dotest cvsadm-17f "cat dir1d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS 2mod dir1d2

	  dotest cvsadm-18 "${testcvs} co 2mod 2d1mod" \
"${SPROG} checkout: Updating 2mod
U 2mod/file2
${SPROG} checkout: Updating dir2d1/sub2d1
U dir2d1/sub2d1/file1"
	  # the usual for the top level
	  dotest cvsadm-18b "cat CVS/Repository" "\."
	  # the usual for 2mod
	  dotest cvsadm-18d "cat 2mod/CVS/Repository" "mod2/sub2"
	  # the usual for 2d1mod
	  dotest cvsadm-18f "cat dir2d1/CVS/Repository" "\."
	  dotest cvsadm-18h "cat dir2d1/sub2d1/CVS/Repository" "mod1"
	  rm -rf CVS 2mod dir2d1

	  dotest cvsadm-19 "${testcvs} co 2mod 2d2mod" \
"${SPROG} checkout: Updating 2mod
U 2mod/file2
${SPROG} checkout: Updating dir2d2/sub2d2
U dir2d2/sub2d2/file2"
	  # the usual for the top level
	  dotest cvsadm-19b "cat CVS/Repository" "\."
	  # the usual for 2mod
	  dotest cvsadm-19d "cat 2mod/CVS/Repository" "mod2/sub2"
	  # the usual for 2d2mod
	  dotest cvsadm-19f "cat dir2d2/CVS/Repository" "mod2"
	  dotest cvsadm-19h "cat dir2d2/sub2d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS 2mod dir2d2


	  ### 1d1mod

	  dotest cvsadm-20 "${testcvs} co 1d1mod 1d1mod-2" \
"${SPROG} checkout: Updating dir1d1
U dir1d1/file1
${SPROG} checkout: Updating dir1d1-2
U dir1d1-2/file1-2"
	  # the usual for the top level
	  dotest cvsadm-20b "cat CVS/Repository" "\."
	  # the usual for 1d1mod
	  dotest cvsadm-20d "cat dir1d1/CVS/Repository" "mod1"
	  # the usual for 1d1mod copy
	  dotest cvsadm-20f "cat dir1d1-2/CVS/Repository" "mod1-2"
	  rm -rf CVS dir1d1 dir1d1-2

	  dotest cvsadm-21 "${testcvs} co 1d1mod 1d2mod" \
"${SPROG} checkout: Updating dir1d1
U dir1d1/file1
${SPROG} checkout: Updating dir1d2
U dir1d2/file2"
	  # the usual for the top level
	  dotest cvsadm-21b "cat CVS/Repository" "\."
	  # the usual for 1d1mod
	  dotest cvsadm-21d "cat dir1d1/CVS/Repository" "mod1"
	  # the usual for 1d2mod
	  dotest cvsadm-21f "cat dir1d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir1d1 dir1d2

	  dotest cvsadm-22 "${testcvs} co 1d1mod 2d1mod" \
"${SPROG} checkout: Updating dir1d1
U dir1d1/file1
${SPROG} checkout: Updating dir2d1/sub2d1
U dir2d1/sub2d1/file1"
	  # the usual for the top level
	  dotest cvsadm-22b "cat CVS/Repository" "\."
	  # the usual for 1d1mod
	  dotest cvsadm-22d "cat dir1d1/CVS/Repository" "mod1"
	  # the usual for 2d1mod
	  dotest cvsadm-22f "cat dir2d1/CVS/Repository" "\."
	  dotest cvsadm-22h "cat dir2d1/sub2d1/CVS/Repository" "mod1"
	  rm -rf CVS dir1d1 dir2d1

	  dotest cvsadm-23 "${testcvs} co 1d1mod 2d2mod" \
"${SPROG} checkout: Updating dir1d1
U dir1d1/file1
${SPROG} checkout: Updating dir2d2/sub2d2
U dir2d2/sub2d2/file2"
	  # the usual for the top level
	  dotest cvsadm-23b "cat CVS/Repository" "\."
	  # the usual for 1d1mod
	  dotest cvsadm-23d "cat dir1d1/CVS/Repository" "mod1"
	  # the usual for 2d2mod
	  dotest cvsadm-23f "cat dir2d2/CVS/Repository" "mod2"
	  dotest cvsadm-23h "cat dir2d2/sub2d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir1d1 dir2d2


	  ### 1d2mod

	  dotest cvsadm-24 "${testcvs} co 1d2mod 1d2mod-2" \
"${SPROG} checkout: Updating dir1d2
U dir1d2/file2
${SPROG} checkout: Updating dir1d2-2
U dir1d2-2/file2-2"
	  # the usual for the top level
	  dotest cvsadm-24b "cat CVS/Repository" "\."
	  # the usual for 1d2mod
	  dotest cvsadm-24d "cat dir1d2/CVS/Repository" "mod2/sub2"
	  # the usual for 1d2mod copy
	  dotest cvsadm-24f "cat dir1d2-2/CVS/Repository" "mod2-2/sub2-2"
	  rm -rf CVS dir1d2 dir1d2-2

	  dotest cvsadm-25 "${testcvs} co 1d2mod 2d1mod" \
"${SPROG} checkout: Updating dir1d2
U dir1d2/file2
${SPROG} checkout: Updating dir2d1/sub2d1
U dir2d1/sub2d1/file1"
	  # the usual for the top level
	  dotest cvsadm-25b "cat CVS/Repository" "\."
	  # the usual for 1d2mod
	  dotest cvsadm-25d "cat dir1d2/CVS/Repository" "mod2/sub2"
	  # the usual for 2d1mod
	  dotest cvsadm-25f "cat dir2d1/CVS/Repository" "\."
	  dotest cvsadm-25h "cat dir2d1/sub2d1/CVS/Repository" "mod1"
	  rm -rf CVS dir1d2 dir2d1

	  dotest cvsadm-26 "${testcvs} co 1d2mod 2d2mod" \
"${SPROG} checkout: Updating dir1d2
U dir1d2/file2
${SPROG} checkout: Updating dir2d2/sub2d2
U dir2d2/sub2d2/file2"
	  # the usual for the top level
	  dotest cvsadm-26b "cat CVS/Repository" "\."
	  # the usual for 1d2mod
	  dotest cvsadm-26d "cat dir1d2/CVS/Repository" "mod2/sub2"
	  # the usual for 2d2mod
	  dotest cvsadm-26f "cat dir2d2/CVS/Repository" "mod2"
	  dotest cvsadm-26h "cat dir2d2/sub2d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir1d2 dir2d2


	  # 2d1mod

	  dotest cvsadm-27 "${testcvs} co 2d1mod 2d1mod-2" \
"${SPROG} checkout: Updating dir2d1/sub2d1
U dir2d1/sub2d1/file1
${SPROG} checkout: Updating dir2d1-2/sub2d1-2
U dir2d1-2/sub2d1-2/file1-2"
	  # the usual for the top level
	  dotest cvsadm-27b "cat CVS/Repository" "\."
	  # the usual for 2d1mod
	  dotest cvsadm-27d "cat dir2d1/CVS/Repository" "\."
	  dotest cvsadm-27f "cat dir2d1/sub2d1/CVS/Repository" "mod1"
	  # the usual for 2d1mod
	  dotest cvsadm-27h "cat dir2d1-2/CVS/Repository" "\."
	  dotest cvsadm-27j "cat dir2d1-2/sub2d1-2/CVS/Repository" "mod1-2"
	  rm -rf CVS dir2d1 dir2d1-2

	  dotest cvsadm-28 "${testcvs} co 2d1mod 2d2mod" \
"${SPROG} checkout: Updating dir2d1/sub2d1
U dir2d1/sub2d1/file1
${SPROG} checkout: Updating dir2d2/sub2d2
U dir2d2/sub2d2/file2"
	  # the usual for the top level
	  dotest cvsadm-28b "cat CVS/Repository" "\."
	  # the usual for 2d1mod
	  dotest cvsadm-28d "cat dir2d1/CVS/Repository" "\."
	  dotest cvsadm-28f "cat dir2d1/sub2d1/CVS/Repository" "mod1"
	  # the usual for 2d2mod
	  dotest cvsadm-28h "cat dir2d2/CVS/Repository" "mod2"
	  dotest cvsadm-28j "cat dir2d2/sub2d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir2d1 dir2d2

	  
	  # 2d2mod

	  dotest cvsadm-29 "${testcvs} co 2d2mod 2d2mod-2" \
"${SPROG} checkout: Updating dir2d2/sub2d2
U dir2d2/sub2d2/file2
${SPROG} checkout: Updating dir2d2-2/sub2d2-2
U dir2d2-2/sub2d2-2/file2-2"
	  # the usual for the top level
	  dotest cvsadm-29b "cat CVS/Repository" "\."
	  # the usual for 2d2mod
	  dotest cvsadm-29d "cat dir2d2/CVS/Repository" "mod2"
	  dotest cvsadm-29f "cat dir2d2/sub2d2/CVS/Repository" "mod2/sub2"
	  # the usual for 2d2mod
	  dotest cvsadm-29h "cat dir2d2-2/CVS/Repository" "mod2-2"
	  dotest cvsadm-29j "cat dir2d2-2/sub2d2-2/CVS/Repository" \
"mod2-2/sub2-2"
	  rm -rf CVS dir2d2 dir2d2-2

	  ##################################################
	  ## And now, all of that again using the "-d" flag
	  ## on the command line.
	  ##################################################

	  dotest cvsadm-1d3 "${testcvs} co -d dir 1mod" \
"${SPROG} checkout: Updating dir
U dir/file1"
	  dotest cvsadm-1d3b "cat CVS/Repository" "\."
	  dotest cvsadm-1d3d "cat dir/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  dotest cvsadm-1d4 "${testcvs} co -d dir 2mod" \
"${SPROG} checkout: Updating dir
U dir/file2"
	  dotest cvsadm-1d4b "cat CVS/Repository" "\."
	  dotest cvsadm-1d4d "cat dir/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir

	  dotest cvsadm-1d5 "${testcvs} co -d dir 1d1mod" \
"${SPROG} checkout: Updating dir
U dir/file1"
	  dotest cvsadm-1d5b "cat CVS/Repository" "\."
	  dotest cvsadm-1d5d "cat dir/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  dotest cvsadm-1d6 "${testcvs} co -d dir 1d2mod" \
"${SPROG} checkout: Updating dir
U dir/file2"
	  dotest cvsadm-1d6b "cat CVS/Repository" "\."
	  dotest cvsadm-1d6d "cat dir/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir

	  dotest cvsadm-1d7 "${testcvs} co -d dir 2d1mod" \
"${SPROG} checkout: Updating dir
U dir/file1"
	  dotest cvsadm-1d7b "cat CVS/Repository" "\."
	  dotest cvsadm-1d7d "cat dir/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  dotest cvsadm-1d8 "${testcvs} co -d dir 2d2mod" \
"${SPROG} checkout: Updating dir
U dir/file2"
	  dotest cvsadm-1d8b "cat CVS/Repository" "\."
	  dotest cvsadm-1d8d "cat dir/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir

	  ##################################################
	  ## Los Combonaciones
	  ##################################################

	  ### 1mod

	  dotest cvsadm-1d9 "${testcvs} co -d dir 1mod 1mod-2" \
"${SPROG} checkout: Updating dir/1mod
U dir/1mod/file1
${SPROG} checkout: Updating dir/1mod-2
U dir/1mod-2/file1-2"
	  # the usual for the top level
	  dotest cvsadm-1d9b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d9d "cat dir/CVS/Repository" "\."
	  # the usual for 1mod
	  dotest cvsadm-1d9f "cat dir/1mod/CVS/Repository" "mod1"
	  # the usual for 1mod copy
	  dotest cvsadm-1d9h "cat dir/1mod-2/CVS/Repository" "mod1-2"
	  rm -rf CVS dir

	  # 1mod 2mod redmod bluemod
	  dotest cvsadm-1d10 "${testcvs} co -d dir 1mod 2mod" \
"${SPROG} checkout: Updating dir/1mod
U dir/1mod/file1
${SPROG} checkout: Updating dir/2mod
U dir/2mod/file2"
	  dotest cvsadm-1d10b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d10d "cat dir/CVS/Repository" "\."
	  # the usual for 1mod
	  dotest cvsadm-1d10f "cat dir/1mod/CVS/Repository" "mod1"
	  # the usual for 2dmod
	  dotest cvsadm-1d10h "cat dir/2mod/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir

	  dotest cvsadm-1d11 "${testcvs} co -d dir 1mod 1d1mod" \
"${SPROG} checkout: Updating dir/1mod
U dir/1mod/file1
${SPROG} checkout: Updating dir/dir1d1
U dir/dir1d1/file1"
	  dotest cvsadm-1d11b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d11d "cat dir/CVS/Repository" "\."
	  # the usual for 1mod
	  dotest cvsadm-1d11f "cat dir/1mod/CVS/Repository" "mod1"
	  # the usual for 1d1mod
	  dotest cvsadm-1d11h "cat dir/dir1d1/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  dotest cvsadm-1d12 "${testcvs} co -d dir 1mod 1d2mod" \
"${SPROG} checkout: Updating dir/1mod
U dir/1mod/file1
${SPROG} checkout: Updating dir/dir1d2
U dir/dir1d2/file2"
	  dotest cvsadm-1d12b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d12d "cat dir/CVS/Repository" "\."
	  # the usual for 1mod
	  dotest cvsadm-1d12f "cat dir/1mod/CVS/Repository" "mod1"
	  # the usual for 1d2mod
	  dotest cvsadm-1d12h "cat dir/dir1d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir

	  dotest cvsadm-1d13 "${testcvs} co -d dir 1mod 2d1mod" \
"${SPROG} checkout: Updating dir/1mod
U dir/1mod/file1
${SPROG} checkout: Updating dir/dir2d1/sub2d1
U dir/dir2d1/sub2d1/file1"
	  dotest cvsadm-1d13b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d13d "cat dir/CVS/Repository" "\."
	  # the usual for 1mod
	  dotest cvsadm-1d13f "cat dir/1mod/CVS/Repository" "mod1"
	  # the usual for 2d1mod
	  dotest cvsadm-1d13h "cat dir/dir2d1/CVS/Repository" "\."
	  dotest cvsadm-1d13j "cat dir/dir2d1/sub2d1/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  dotest cvsadm-1d14 "${testcvs} co -d dir 1mod 2d2mod" \
"${SPROG} checkout: Updating dir/1mod
U dir/1mod/file1
${SPROG} checkout: Updating dir/dir2d2/sub2d2
U dir/dir2d2/sub2d2/file2"
	  dotest cvsadm-1d14b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d14d "cat dir/CVS/Repository" "\."
	  # the usual for 1mod
	  dotest cvsadm-1d14f "cat dir/1mod/CVS/Repository" "mod1"
	  # the usual for 2d2mod
	  dotest cvsadm-1d14h "cat dir/dir2d2/CVS/Repository" "mod2"
	  dotest cvsadm-1d14j "cat dir/dir2d2/sub2d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir


	  ### 2mod

	  dotest cvsadm-1d15 "${testcvs} co -d dir 2mod 2mod-2" \
"${SPROG} checkout: Updating dir/2mod
U dir/2mod/file2
${SPROG} checkout: Updating dir/2mod-2
U dir/2mod-2/file2-2"
	  dotest cvsadm-1d15b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d15d "cat dir/CVS/Repository" "mod2"
	  # the usual for 2mod
	  dotest cvsadm-1d15f "cat dir/2mod/CVS/Repository" "mod2/sub2"
	  # the usual for 2mod copy
	  dotest cvsadm-1d15h "cat dir/2mod-2/CVS/Repository" "mod2-2/sub2-2"
	  rm -rf CVS dir

	  dotest cvsadm-1d16 "${testcvs} co -d dir 2mod 1d1mod" \
"${SPROG} checkout: Updating dir/2mod
U dir/2mod/file2
${SPROG} checkout: Updating dir/dir1d1
U dir/dir1d1/file1"
	  dotest cvsadm-1d16b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d16d "cat dir/CVS/Repository" "mod2"
	  # the usual for 2mod
	  dotest cvsadm-1d16f "cat dir/2mod/CVS/Repository" "mod2/sub2"
	  # the usual for 1d1mod
	  dotest cvsadm-1d16h "cat dir/dir1d1/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  dotest cvsadm-1d17 "${testcvs} co -d dir 2mod 1d2mod" \
"${SPROG} checkout: Updating dir/2mod
U dir/2mod/file2
${SPROG} checkout: Updating dir/dir1d2
U dir/dir1d2/file2"
	  dotest cvsadm-1d17b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d17d "cat dir/CVS/Repository" "mod2"
	  # the usual for 2mod
	  dotest cvsadm-1d17f "cat dir/2mod/CVS/Repository" "mod2/sub2"
	  # the usual for 1d2mod
	  dotest cvsadm-1d17h "cat dir/dir1d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir

	  dotest cvsadm-1d18 "${testcvs} co -d dir 2mod 2d1mod" \
"${SPROG} checkout: Updating dir/2mod
U dir/2mod/file2
${SPROG} checkout: Updating dir/dir2d1/sub2d1
U dir/dir2d1/sub2d1/file1"
	  dotest cvsadm-1d18b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d18d "cat dir/CVS/Repository" "mod2"
	  # the usual for 2mod
	  dotest cvsadm-1d18f "cat dir/2mod/CVS/Repository" "mod2/sub2"
	  # the usual for 2d1mod
	  dotest cvsadm-1d18h "cat dir/dir2d1/CVS/Repository" "\."
	  dotest cvsadm-1d18j "cat dir/dir2d1/sub2d1/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  dotest cvsadm-1d19 "${testcvs} co -d dir 2mod 2d2mod" \
"${SPROG} checkout: Updating dir/2mod
U dir/2mod/file2
${SPROG} checkout: Updating dir/dir2d2/sub2d2
U dir/dir2d2/sub2d2/file2"
	  dotest cvsadm-1d19b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d19d "cat dir/CVS/Repository" "mod2"
	  # the usual for 2mod
	  dotest cvsadm-1d19f "cat dir/2mod/CVS/Repository" "mod2/sub2"
	  # the usual for 2d2mod
	  dotest cvsadm-1d19h "cat dir/dir2d2/CVS/Repository" "mod2"
	  dotest cvsadm-1d19j "cat dir/dir2d2/sub2d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir


	  ### 1d1mod

	  dotest cvsadm-1d20 "${testcvs} co -d dir 1d1mod 1d1mod-2" \
"${SPROG} checkout: Updating dir/dir1d1
U dir/dir1d1/file1
${SPROG} checkout: Updating dir/dir1d1-2
U dir/dir1d1-2/file1-2"
	  dotest cvsadm-1d20b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d20d "cat dir/CVS/Repository" "\."
	  # the usual for 1d1mod
	  dotest cvsadm-1d20f "cat dir/dir1d1/CVS/Repository" "mod1"
	  # the usual for 1d1mod copy
	  dotest cvsadm-1d20h "cat dir/dir1d1-2/CVS/Repository" "mod1-2"
	  rm -rf CVS dir

	  dotest cvsadm-1d21 "${testcvs} co -d dir 1d1mod 1d2mod" \
"${SPROG} checkout: Updating dir/dir1d1
U dir/dir1d1/file1
${SPROG} checkout: Updating dir/dir1d2
U dir/dir1d2/file2"
	  dotest cvsadm-1d21b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d21d "cat dir/CVS/Repository" "\."
	  # the usual for 1d1mod
	  dotest cvsadm-1d21f "cat dir/dir1d1/CVS/Repository" "mod1"
	  # the usual for 1d2mod
	  dotest cvsadm-1d21h "cat dir/dir1d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir

	  dotest cvsadm-1d22 "${testcvs} co -d dir 1d1mod 2d1mod" \
"${SPROG} checkout: Updating dir/dir1d1
U dir/dir1d1/file1
${SPROG} checkout: Updating dir/dir2d1/sub2d1
U dir/dir2d1/sub2d1/file1"
	  dotest cvsadm-1d22b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d22d "cat dir/CVS/Repository" "\."
	  # the usual for 1d1mod
	  dotest cvsadm-1d22f "cat dir/dir1d1/CVS/Repository" "mod1"
	  # the usual for 2d1mod
	  dotest cvsadm-1d22h "cat dir/dir2d1/CVS/Repository" "\."
	  dotest cvsadm-1d22j "cat dir/dir2d1/sub2d1/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  dotest cvsadm-1d23 "${testcvs} co -d dir 1d1mod 2d2mod" \
"${SPROG} checkout: Updating dir/dir1d1
U dir/dir1d1/file1
${SPROG} checkout: Updating dir/dir2d2/sub2d2
U dir/dir2d2/sub2d2/file2"
	  dotest cvsadm-1d23b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d23d "cat dir/CVS/Repository" "\."
	  # the usual for 1d1mod
	  dotest cvsadm-1d23f "cat dir/dir1d1/CVS/Repository" "mod1"
	  # the usual for 2d2mod
	  dotest cvsadm-1d23h "cat dir/dir2d2/CVS/Repository" "mod2"
	  dotest cvsadm-1d23j "cat dir/dir2d2/sub2d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir


	  ### 1d2mod

	  dotest cvsadm-1d24 "${testcvs} co -d dir 1d2mod 1d2mod-2" \
"${SPROG} checkout: Updating dir/dir1d2
U dir/dir1d2/file2
${SPROG} checkout: Updating dir/dir1d2-2
U dir/dir1d2-2/file2-2"
	  dotest cvsadm-1d24b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d24d "cat dir/CVS/Repository" "mod2"
	  # the usual for 1d2mod
	  dotest cvsadm-1d24f "cat dir/dir1d2/CVS/Repository" "mod2/sub2"
	  # the usual for 1d2mod copy
	  dotest cvsadm-1d24h "cat dir/dir1d2-2/CVS/Repository" "mod2-2/sub2-2"
	  rm -rf CVS dir

	  dotest cvsadm-1d25 "${testcvs} co -d dir 1d2mod 2d1mod" \
"${SPROG} checkout: Updating dir/dir1d2
U dir/dir1d2/file2
${SPROG} checkout: Updating dir/dir2d1/sub2d1
U dir/dir2d1/sub2d1/file1"
	  dotest cvsadm-1d25b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d25d "cat dir/CVS/Repository" "mod2"
	  # the usual for 1d2mod
	  dotest cvsadm-1d25f "cat dir/dir1d2/CVS/Repository" "mod2/sub2"
	  # the usual for 2d1mod
	  dotest cvsadm-1d25h "cat dir/dir2d1/CVS/Repository" "\."
	  dotest cvsadm-1d25j "cat dir/dir2d1/sub2d1/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  dotest cvsadm-1d26 "${testcvs} co -d dir 1d2mod 2d2mod" \
"${SPROG} checkout: Updating dir/dir1d2
U dir/dir1d2/file2
${SPROG} checkout: Updating dir/dir2d2/sub2d2
U dir/dir2d2/sub2d2/file2"
	  dotest cvsadm-1d26b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d26d "cat dir/CVS/Repository" "mod2"
	  # the usual for 1d2mod
	  dotest cvsadm-1d26f "cat dir/dir1d2/CVS/Repository" "mod2/sub2"
	  # the usual for 2d2mod
	  dotest cvsadm-1d26h "cat dir/dir2d2/CVS/Repository" "mod2"
	  dotest cvsadm-1d26j "cat dir/dir2d2/sub2d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir


	  # 2d1mod

	  dotest cvsadm-1d27 "${testcvs} co -d dir 2d1mod 2d1mod-2" \
"${SPROG} checkout: Updating dir/dir2d1/sub2d1
U dir/dir2d1/sub2d1/file1
${SPROG} checkout: Updating dir/dir2d1-2/sub2d1-2
U dir/dir2d1-2/sub2d1-2/file1-2"
	  dotest cvsadm-1d27b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d27d "cat dir/CVS/Repository" "CVSROOT/Emptydir"
	  # the usual for 2d1mod
	  dotest cvsadm-1d27f "cat dir/dir2d1/CVS/Repository" "\."
	  dotest cvsadm-1d27h "cat dir/dir2d1/sub2d1/CVS/Repository" "mod1"
	  # the usual for 2d1mod
	  dotest cvsadm-1d27j "cat dir/dir2d1-2/CVS/Repository" "\."
	  dotest cvsadm-1d27l "cat dir/dir2d1-2/sub2d1-2/CVS/Repository" \
"mod1-2"
	  rm -rf CVS dir

	  dotest cvsadm-1d28 "${testcvs} co -d dir 2d1mod 2d2mod" \
"${SPROG} checkout: Updating dir/dir2d1/sub2d1
U dir/dir2d1/sub2d1/file1
${SPROG} checkout: Updating dir/dir2d2/sub2d2
U dir/dir2d2/sub2d2/file2"
	  dotest cvsadm-1d28b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d28d "cat dir/CVS/Repository" "CVSROOT/Emptydir"
	  # the usual for 2d1mod
	  dotest cvsadm-1d28f "cat dir/dir2d1/CVS/Repository" "\."
	  dotest cvsadm-1d28h "cat dir/dir2d1/sub2d1/CVS/Repository" "mod1"
	  # the usual for 2d2mod
	  dotest cvsadm-1d28j "cat dir/dir2d2/CVS/Repository" "mod2"
	  dotest cvsadm-1d28l "cat dir/dir2d2/sub2d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir

	  
	  # 2d2mod

	  dotest cvsadm-1d29 "${testcvs} co -d dir 2d2mod 2d2mod-2" \
"${SPROG} checkout: Updating dir/dir2d2/sub2d2
U dir/dir2d2/sub2d2/file2
${SPROG} checkout: Updating dir/dir2d2-2/sub2d2-2
U dir/dir2d2-2/sub2d2-2/file2-2"
	  dotest cvsadm-1d29b "cat CVS/Repository" "\."
	  # the usual for the dir level
	  dotest cvsadm-1d29d "cat dir/CVS/Repository" "\."
	  # the usual for 2d2mod
	  dotest cvsadm-1d29f "cat dir/dir2d2/CVS/Repository" "mod2"
	  dotest cvsadm-1d29h "cat dir/dir2d2/sub2d2/CVS/Repository" "mod2/sub2"
	  # the usual for 2d2mod
	  dotest cvsadm-1d29j "cat dir/dir2d2-2/CVS/Repository" "mod2-2"
	  dotest cvsadm-1d29l "cat dir/dir2d2-2/sub2d2-2/CVS/Repository" \
"mod2-2/sub2-2"
	  rm -rf CVS dir

	  ##################################################
	  ## And now, some of that again using the "-d" flag
	  ## on the command line, but use a longer path.
	  ##################################################

	  dotest cvsadm-2d3-1 "$testcvs co -d dir/dir2 1mod" \
"$SPROG checkout: Updating dir/dir2
U dir/dir2/file1"

	  # Remote couldn't handle this, even with the "mkdir dir", before
	  # CVS 1.11.14.
	  dotest cvsadm-2d3b "cat CVS/Repository" "\."
	  dotest cvsadm-2d3d "cat dir/CVS/Repository" "."
	  dotest cvsadm-2d3f "cat dir/dir2/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  mkdir dir
	  dotest cvsadm-2d4 "$testcvs co -d dir/dir2 2mod" \
"$SPROG checkout: Updating dir/dir2
U dir/dir2/file2"
	  dotest cvsadm-2d4b "cat CVS/Repository" "\."
	  dotest cvsadm-2d4f "cat dir/dir2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir

	  mkdir dir
	  dotest cvsadm-2d5 "$testcvs co -d dir/dir2 1d1mod" \
"$SPROG checkout: Updating dir/dir2
U dir/dir2/file1"
	  dotest cvsadm-2d5b "cat CVS/Repository" "\."
	  dotest cvsadm-2d5f "cat dir/dir2/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  mkdir dir
	  dotest cvsadm-2d6 "$testcvs co -d dir/dir2 1d2mod" \
"$SPROG checkout: Updating dir/dir2
U dir/dir2/file2"
	  dotest cvsadm-2d6b "cat CVS/Repository" "\."
	  dotest cvsadm-2d6f "cat dir/dir2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir

	  mkdir dir
	  dotest cvsadm-2d7 "$testcvs co -d dir/dir2 2d1mod" \
"$SPROG checkout: Updating dir/dir2
U dir/dir2/file1"
	  dotest cvsadm-2d7b "cat CVS/Repository" "\."
	  dotest cvsadm-2d7f "cat dir/dir2/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  mkdir dir
	  dotest cvsadm-2d8 "$testcvs co -d dir/dir2 2d2mod" \
"$SPROG checkout: Updating dir/dir2
U dir/dir2/file2"
	  dotest cvsadm-2d8b "cat CVS/Repository" "\."
	  dotest cvsadm-2d8f "cat dir/dir2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir

	  ##################################################
	  ## And now, a few of those tests revisited to
	  ## test the behavior of the -N flag.
	  ##################################################

	  dotest cvsadm-N3 "$testcvs co -N 1mod" \
"$SPROG checkout: Updating 1mod
U 1mod/file1"
	  dotest cvsadm-N3b "cat CVS/Repository" "\."
	  dotest cvsadm-N3d "cat 1mod/CVS/Repository" "mod1"
	  rm -rf CVS 1mod

	  dotest cvsadm-N4 "$testcvs co -N 2mod" \
"$SPROG checkout: Updating 2mod
U 2mod/file2"
	  dotest cvsadm-N4b "cat CVS/Repository" "\."
	  dotest cvsadm-N4d "cat 2mod/CVS/Repository" "mod2/sub2"
	  rm -rf CVS 2mod

	  dotest cvsadm-N5 "$testcvs co -N 1d1mod" \
"$SPROG checkout: Updating dir1d1
U dir1d1/file1"
	  dotest cvsadm-N5b "cat CVS/Repository" "\."
	  dotest cvsadm-N5d "cat dir1d1/CVS/Repository" "mod1"
	  rm -rf CVS dir1d1

	  dotest cvsadm-N6 "$testcvs co -N 1d2mod" \
"$SPROG checkout: Updating dir1d2
U dir1d2/file2"
	  dotest cvsadm-N6b "cat CVS/Repository" "\."
	  dotest cvsadm-N6d "cat dir1d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir1d2

	  dotest cvsadm-N7 "$testcvs co -N 2d1mod" \
"$SPROG checkout: Updating dir2d1/sub2d1
U dir2d1/sub2d1/file1"
	  dotest cvsadm-N7b "cat CVS/Repository" "\."
	  dotest cvsadm-N7d "cat dir2d1/CVS/Repository" "\."
	  dotest cvsadm-N7f "cat dir2d1/sub2d1/CVS/Repository" "mod1"
	  rm -rf CVS dir2d1

	  dotest cvsadm-N8 "$testcvs co -N 2d2mod" \
"$SPROG checkout: Updating dir2d2/sub2d2
U dir2d2/sub2d2/file2"
	  dotest cvsadm-N8b "cat CVS/Repository" "\."
	  dotest cvsadm-N8d "cat dir2d2/CVS/Repository" "mod2"
	  dotest cvsadm-N8f "cat dir2d2/sub2d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir2d2

	  ## the ones in one-deep directories

	  dotest cvsadm-N1d3 "$testcvs co -N -d dir 1mod" \
"$SPROG checkout: Updating dir/1mod
U dir/1mod/file1"
	  dotest cvsadm-N1d3b "cat CVS/Repository" "\."
	  dotest cvsadm-N1d3d "cat dir/CVS/Repository" "\."
	  dotest cvsadm-N1d3f "cat dir/1mod/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  dotest cvsadm-N1d4 "$testcvs co -N -d dir 2mod" \
"$SPROG checkout: Updating dir/2mod
U dir/2mod/file2"
	  dotest cvsadm-N1d4b "cat CVS/Repository" "\."
	  dotest cvsadm-N1d4d "cat dir/CVS/Repository" "mod2"
	  dotest cvsadm-N1d4f "cat dir/2mod/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir

	  dotest cvsadm-N1d5 "$testcvs co -N -d dir 1d1mod" \
"$SPROG checkout: Updating dir/dir1d1
U dir/dir1d1/file1"
	  dotest cvsadm-N1d5b "cat CVS/Repository" "\."
	  dotest cvsadm-N1d5d "cat dir/CVS/Repository" "\."
	  dotest cvsadm-N1d5d "cat dir/dir1d1/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  dotest cvsadm-N1d6 "$testcvs co -N -d dir 1d2mod" \
"$SPROG checkout: Updating dir/dir1d2
U dir/dir1d2/file2"
	  dotest cvsadm-N1d6b "cat CVS/Repository" "\."
	  dotest cvsadm-N1d6d "cat dir/CVS/Repository" "mod2"
	  dotest cvsadm-N1d6f "cat dir/dir1d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir

	  dotest cvsadm-N1d7 "$testcvs co -N -d dir 2d1mod" \
"$SPROG checkout: Updating dir/dir2d1/sub2d1
U dir/dir2d1/sub2d1/file1"
	  dotest cvsadm-N1d7b "cat CVS/Repository" "\."
	  dotest cvsadm-N1d7d "cat dir/CVS/Repository" "CVSROOT/Emptydir"
	  dotest cvsadm-N1d7f "cat dir/dir2d1/CVS/Repository" "\."
	  dotest cvsadm-N1d7h "cat dir/dir2d1/sub2d1/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  dotest cvsadm-N1d8 "$testcvs co -N -d dir 2d2mod" \
"$SPROG checkout: Updating dir/dir2d2/sub2d2
U dir/dir2d2/sub2d2/file2"
	  dotest cvsadm-N1d8b "cat CVS/Repository" "\."
	  dotest cvsadm-N1d8d "cat dir/CVS/Repository" "\."
	  dotest cvsadm-N1d8d "cat dir/dir2d2/CVS/Repository" "mod2"
	  dotest cvsadm-N1d8d "cat dir/dir2d2/sub2d2/CVS/Repository" \
"mod2/sub2"
	  rm -rf CVS dir

	  ## the ones in two-deep directories

	  mkdir dir
	  dotest cvsadm-N2d3 "$testcvs co -N -d dir/dir2 1mod" \
"$SPROG checkout: Updating dir/dir2/1mod
U dir/dir2/1mod/file1"
	  dotest cvsadm-N2d3b "cat CVS/Repository" "\."
	  dotest cvsadm-N2d3f "cat dir/dir2/CVS/Repository" "\."
	  dotest cvsadm-N2d3h "cat dir/dir2/1mod/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  mkdir dir
	  dotest cvsadm-N2d4 "$testcvs co -N -d dir/dir2 2mod" \
"$SPROG checkout: Updating dir/dir2/2mod
U dir/dir2/2mod/file2"
	  dotest cvsadm-N2d4b "cat CVS/Repository" "\."
	  dotest cvsadm-N2d4f "cat dir/dir2/CVS/Repository" "mod2"
	  dotest cvsadm-N2d4h "cat dir/dir2/2mod/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir

	  mkdir dir
	  dotest cvsadm-N2d5 "$testcvs co -N -d dir/dir2 1d1mod" \
"$SPROG checkout: Updating dir/dir2/dir1d1
U dir/dir2/dir1d1/file1"
	  dotest cvsadm-N2d5b "cat CVS/Repository" "\."
	  dotest cvsadm-N2d5f "cat dir/dir2/CVS/Repository" "\."
	  dotest cvsadm-N2d5h "cat dir/dir2/dir1d1/CVS/Repository" "mod1"
	  rm -rf CVS dir

	  mkdir dir
	  dotest cvsadm-N2d6 "$testcvs co -N -d dir/dir2 1d2mod" \
"$SPROG checkout: Updating dir/dir2/dir1d2
U dir/dir2/dir1d2/file2"
	  dotest cvsadm-N2d6b "cat CVS/Repository" "\."
	  dotest cvsadm-N2d6f "cat dir/dir2/CVS/Repository" "mod2"
	  dotest cvsadm-N2d6h "cat dir/dir2/dir1d2/CVS/Repository" "mod2/sub2"
	  rm -rf CVS dir

	  mkdir dir
	  dotest cvsadm-N2d7 "$testcvs co -N -d dir/dir2 2d1mod" \
"$SPROG checkout: Updating dir/dir2/dir2d1/sub2d1
U dir/dir2/dir2d1/sub2d1/file1"
	  dotest cvsadm-N2d7b "cat CVS/Repository" "\."
	  dotest cvsadm-N2d7f "cat dir/dir2/CVS/Repository" "CVSROOT/Emptydir"
	  dotest cvsadm-N2d7g "cat dir/dir2/dir2d1/CVS/Repository" "\."
	  dotest cvsadm-N2d7h "cat dir/dir2/dir2d1/sub2d1/CVS/Repository" \
"mod1"
	  rm -rf CVS dir

	  mkdir dir
	  dotest cvsadm-N2d8 "$testcvs co -N -d dir/dir2 2d2mod" \
"$SPROG checkout: Updating dir/dir2/dir2d2/sub2d2
U dir/dir2/dir2d2/sub2d2/file2"
	  dotest cvsadm-N2d8b "cat CVS/Repository" "\."
	  dotest cvsadm-N2d8f "cat dir/dir2/CVS/Repository" "\."
	  dotest cvsadm-N2d8h "cat dir/dir2/dir2d2/CVS/Repository" "mod2"
	  dotest cvsadm-N2d8j "cat dir/dir2/dir2d2/sub2d2/CVS/Repository" \
"mod2/sub2"
	  rm -rf CVS dir
	  # End of test that didn't work for remote prior to CVS 1.11.14.

	  ##################################################
	  ## That's enough of that, thank you very much.
	  ##################################################

	  dokeep
	  restore_adm

	  # remove our junk
	  cd ..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/1mod $CVSROOT_DIRNAME/1mod-2 \
			     $CVSROOT_DIRNAME/2mod $CVSROOT_DIRNAME/2mod-2 \
			     $CVSROOT_DIRNAME/mod1 $CVSROOT_DIRNAME/mod1-2 \
			     $CVSROOT_DIRNAME/mod2 $CVSROOT_DIRNAME/mod2-2
	  ;;



	emptydir)
	  # Various tests of the Emptydir (CVSNULLREPOS) code.  See also:
	  #   cvsadm: tests of Emptydir in various module definitions
	  #   basicb: Test that "Emptydir" is non-special in ordinary contexts

	  mkdir 1; cd 1
	  dotest emptydir-1 "${testcvs} co CVSROOT/modules" \
"U CVSROOT/modules"
	  echo "# Module defs for emptydir tests" > CVSROOT/modules
	  echo "2d1mod -d dir2d1/sub/sub2d1 mod1" >> CVSROOT/modules
	  echo "2d1moda -d dir2d1/suba moda/modasub" >> CVSROOT/modules
	  echo "2d1modb -d dir2d1/suba mod1" >> CVSROOT/modules
	  echo "comb -a 2d1modb 2d1moda" >> CVSROOT/modules

	  dotest emptydir-2 "${testcvs} ci -m add-modules" \
"${CPROG} commit: Examining CVSROOT
${CVSROOT_DIRNAME}/CVSROOT/modules,v  <--  CVSROOT/modules
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
${SPROG} commit: Rebuilding administrative file database" \
"${CPROG} commit: Examining CVSROOT"
	  rm -rf CVS CVSROOT

	  modify_repo mkdir $CVSROOT_DIRNAME/mod1 $CVSROOT_DIRNAME/moda
	  # Populate.  Not sure we really need to do this.
	  dotest emptydir-3 "$testcvs -q co -l ."
	  dotest emptydir-3a "${testcvs} co mod1 moda" \
"${SPROG} checkout: Updating mod1
${SPROG} checkout: Updating moda"
	  echo "file1" > mod1/file1
	  mkdir moda/modasub
	  dotest emptydir-3b "${testcvs} add moda/modasub" \
"Directory ${CVSROOT_DIRNAME}/moda/modasub added to the repository"
	  echo "filea" > moda/modasub/filea
	  dotest emptydir-4 "${testcvs} add mod1/file1 moda/modasub/filea" \
"${SPROG} add: scheduling file .mod1/file1. for addition
${SPROG} add: scheduling file .moda/modasub/filea. for addition
${SPROG} add: use \`${SPROG} commit' to add these files permanently"
	  dotest emptydir-5 "${testcvs} -q ci -m yup" \
"$CVSROOT_DIRNAME/mod1/file1,v  <--  mod1/file1
initial revision: 1\.1
${CVSROOT_DIRNAME}/moda/modasub/filea,v  <--  moda/modasub/filea
initial revision: 1\.1"
	  rm -rf mod1 moda CVS
	  # End Populate.

	  dotest emptydir-6 "${testcvs} co 2d1mod" \
"${SPROG} checkout: Updating dir2d1/sub/sub2d1
U dir2d1/sub/sub2d1/file1"
	  cd dir2d1
	  touch emptyfile
	  # It doesn't make any sense to add a file (or do much of anything
	  # else) in Emptydir; Emptydir is a placeholder indicating that
	  # the working directory doesn't correspond to anything in
	  # the repository.
	  dotest_fail emptydir-7 "${testcvs} add emptyfile" \
"${SPROG} \[add aborted]: cannot add to \`${CVSROOT_DIRNAME}/CVSROOT/Emptydir'"
	  mkdir emptydir
	  dotest_fail emptydir-8 "${testcvs} add emptydir" \
"${CPROG} \[add aborted]: cannot add to \`${CVSROOT_DIRNAME}/CVSROOT/Emptydir'"
	  cd ..
	  rm -rf CVS dir2d1

	  # OK, while we have an Emptydir around, test a few obscure
	  # things about it.
	  mkdir edir; cd edir
	  dotest emptydir-9 "${testcvs} -q co -l CVSROOT" \
"U CVSROOT${DOTSTAR}"
	  cd CVSROOT
	  dotest_fail emptydir-10 "test -d Emptydir" ''
	  # This tests the code in find_dirs which skips Emptydir.
	  dotest emptydir-11 "${testcvs} -q -n update -d -P" ''
	  cd ../..
	  rm -r edir
	  cd ..

	  # Now start playing with moda.
	  mkdir 2; cd 2
	  dotest emptydir-12 "${testcvs} -q co 2d1moda" \
"U dir2d1/suba/filea"
	  # OK, this is the crux of the matter.  This used to show "Emptydir",
	  # but everyone seemed to think it should show "moda".  This
	  # usually works better, but not always as shown by the following
	  # test.
	  dotest emptydir-13 "cat dir2d1/CVS/Repository" "moda"
	  dotest_fail emptydir-14 "${testcvs} co comb" \
"${SPROG} checkout: existing repository ${CVSROOT_DIRNAME}/moda/modasub does not match ${CVSROOT_DIRNAME}/mod1
${SPROG} checkout: ignoring module 2d1modb
${SPROG} checkout: Updating dir2d1/suba"
	  dotest emptydir-15 "cat dir2d1/CVS/Repository" "moda"
	  cd ..

	  # Test the effect of a non-cvs directory already existing with the
	  # same name as one in the modules file.
	  mkdir 3; cd 3
	  mkdir dir2d1
	  dotest emptydir-16 "${testcvs} co 2d1mod" \
"${SPROG} checkout: Updating dir2d1/sub/sub2d1
U dir2d1/sub/sub2d1/file1"

	  if $remote; then
	    dotest emptydir-17 "cat dir2d1/CVS/Repository" "CVSROOT/Emptydir"
	  else
	    dotest_fail emptydir-17 "test -d dir2d1/CVS"
	  fi

	  dokeep
	  cd ..
	  rm -r 1 2 3
	  modify_repo rm -rf $CVSROOT_DIRNAME/mod1 $CVSROOT_DIRNAME/moda
	  # I guess for the moment the convention is going to be
	  # that we don't need to remove $CVSROOT_DIRNAME/CVSROOT/Emptydir
	  ;;



	abspath)
	
	  # These tests test the thituations thin thwitch thoo theck
	  # things thout twith thabsolute thaths.  Threally.

	  #
	  # CHECKOUTS
	  #

	  # Create a few modules to use
	  modify_repo mkdir $CVSROOT_DIRNAME/mod1 $CVSROOT_DIRNAME/mod2
	  dotest abspath-1a "${testcvs} co mod1 mod2" \
"${SPROG} checkout: Updating mod1
${SPROG} checkout: Updating mod2"

	  # Populate the module
	  echo "file1" > mod1/file1
	  echo "file2" > mod2/file2
	  cd mod1
	  dotest abspath-1ba "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use \`${SPROG} commit' to add this file permanently"
          cd ..
          cd mod2
	  dotest abspath-1bb "${testcvs} add file2" \
"${SPROG} add: scheduling file .file2. for addition
${SPROG} add: use \`${SPROG} commit' to add this file permanently"
          cd ..

	  dotest abspath-1c "${testcvs} ci -m yup mod1 mod2" \
"${CPROG} commit: Examining mod1
${CPROG} commit: Examining mod2
${CVSROOT_DIRNAME}/mod1/file1,v  <--  mod1/file1
initial revision: 1.1
${CVSROOT_DIRNAME}/mod2/file2,v  <--  mod2/file2
initial revision: 1.1"
	  # Finished creating the module -- clean up.
	  rm -rf CVS mod1 mod2
	  # Done.
	  
	  # Try checking out the module in a local directory
	  if $remote; then
	    dotest_fail abspath-2a "${testcvs} co -d ${TESTDIR}/1 mod1" \
"${SPROG} \[checkout aborted\]: absolute pathnames invalid for server (specified .${TESTDIR}/1.)"
	    dotest abspath-2a-try2 "${testcvs} co -d 1 mod1" \
"${SPROG} checkout: Updating 1
U 1/file1"
	  else
	    dotest abspath-2a "${testcvs} co -d ${TESTDIR}/1 mod1" \
"${SPROG} checkout: Updating ${TESTDIR}/1
U ${TESTDIR}/1/file1"
	  fi # remote workaround

	  dotest abspath-2b "cat ${TESTDIR}/1/CVS/Repository" "mod1"

	  # Done.  Clean up.
	  rm -r $TESTDIR/1


	  # Now try in a subdirectory.  We're not covering any more
	  # code here, but we might catch a future error if someone
	  # changes the checkout code.

	  # Since CVS 1.11.14, CVS will create leading directories specified
	  # via co -d.
	  # I am unsure that this wasn't the behavior prior to CVS 1.9, but the
	  # comment that used to be here leads me to believe it was not.
	  if $remote; then :; else
	    dotest abspath-3.1 "$testcvs -q co -d $TESTDIR/1/2 mod1" \
"U $TESTDIR/1/2/file1"
	    rm -r $TESTDIR/1
	  fi
	  dotest abspath-3.2 "$testcvs -q co -d 1/2 mod1" \
"U 1/2/file1"
	  rm -r 1

	  # We don't to mess with an existing directory just to traverse it,
	  # for example by creating a CVS directory, but currently we can't
	  # avoid this in client/server mode.
	  mkdir 1
	  if $remote; then
	    dotest abspath-3ar "$testcvs co -d 1/2 mod1" \
"$SPROG checkout: Updating 1/2
U 1/2/file1"
	    dotest abspath-3br "cat 1/CVS/Repository" .
	  else
	    dotest abspath-3a "$testcvs co -d $TESTDIR/1/2 mod1" \
"$SPROG checkout: Updating $TESTDIR/1/2
U $TESTDIR/1/2/file1"
	    dotest_fail abspath-3b "test -d ${TESTDIR}/1/CVS"
	  fi

	  dotest abspath-3c "cat ${TESTDIR}/1/2/CVS/Repository" mod1


	  # Done.  Clean up.
	  rm -rf ${TESTDIR}/1


	  # Now try someplace where we don't have permission.
	  mkdir ${TESTDIR}/barf
	  chmod -w ${TESTDIR}/barf
	  dotest_fail abspath-4r "${testcvs} co -d ${TESTDIR}/barf/sub mod1" \
"${SPROG} \[checkout aborted\]: cannot make directory sub: Permission denied" \
"${SPROG} \[checkout aborted\]: absolute pathnames invalid for server (specified .${TESTDIR}/barf/sub.)"
	  chmod +w ${TESTDIR}/barf
	  rmdir ${TESTDIR}/barf
	  # Done.  Nothing to clean up.


	  # Try checking out two modules into the same directory.
	  if $remote; then
	    dotest abspath-5ar "${testcvs} co -d 1 mod1 mod2" \
"${SPROG} checkout: Updating 1/mod1
U 1/mod1/file1
${SPROG} checkout: Updating 1/mod2
U 1/mod2/file2"
	  else
	    dotest abspath-5a "${testcvs} co -d ${TESTDIR}/1 mod1 mod2" \
"${SPROG} checkout: Updating ${TESTDIR}/1/mod1
U ${TESTDIR}/1/mod1/file1
${SPROG} checkout: Updating ${TESTDIR}/1/mod2
U ${TESTDIR}/1/mod2/file2"
	  fi # end remote workaround
	  dotest abspath-5b "cat ${TESTDIR}/1/CVS/Repository" "\."
	  dotest abspath-5c "cat ${TESTDIR}/1/mod1/CVS/Repository" "mod1"
	  dotest abspath-5d "cat ${TESTDIR}/1/mod2/CVS/Repository" "mod2"
	  # Done.  Clean up.
	  rm -rf $TESTDIR/1


	  # Try checking out the top-level module.
	  if $remote; then
	    dotest abspath-6ar "$testcvs co -d 1 ." \
"$SPROG checkout: Updating 1
$SPROG checkout: Updating 1/CVSROOT
$DOTSTAR
$SPROG checkout: Updating 1/mod1
U 1/mod1/file1
$SPROG checkout: Updating 1/mod2
U 1/mod2/file2"
	  else
	    dotest abspath-6a "${testcvs} co -d ${TESTDIR}/1 ." \
"${SPROG} checkout: Updating ${TESTDIR}/1
${SPROG} checkout: Updating ${TESTDIR}/1/CVSROOT
${DOTSTAR}
${SPROG} checkout: Updating ${TESTDIR}/1/mod1
U ${TESTDIR}/1/mod1/file1
${SPROG} checkout: Updating ${TESTDIR}/1/mod2
U ${TESTDIR}/1/mod2/file2"
	  fi # end of remote workaround
	  dotest abspath-6b "cat ${TESTDIR}/1/CVS/Repository" "\."
	  dotest abspath-6c "cat ${TESTDIR}/1/CVSROOT/CVS/Repository" "CVSROOT"
	  dotest abspath-6c "cat ${TESTDIR}/1/mod1/CVS/Repository" "mod1"
	  dotest abspath-6d "cat ${TESTDIR}/1/mod2/CVS/Repository" "mod2"
	  # Done.  Clean up.
	  rm -rf ${TESTDIR}/1

	  # Test that an absolute pathname to some other directory
	  # doesn't mess with the current working directory.
	  mkdir 1
	  cd 1
	  if $remote; then
	    dotest_fail abspath-7ar "${testcvs} -q co -d ../2 mod2" \
"${SPROG} checkout: protocol error: .\.\./2. contains more leading \.\.
${SPROG} \[checkout aborted\]: than the 0 which Max-dotdot specified"
	    cd ..
	    dotest abspath-7a-try2r "${testcvs} -q co -d 2 mod2" \
"U 2/file2"
	    cd 1
	  else
	    dotest abspath-7a "${testcvs} -q co -d ${TESTDIR}/2 mod2" \
"U ${TESTDIR}/2/file2"
	  fi # remote workaround
	  dotest abspath-7b "ls" ""
	  dotest abspath-7c "${testcvs} -q co mod1" \
"U mod1/file1"
	  cd mod1
	  if $remote; then
	    cd ../..
	    dotest abspath-7dr "${testcvs} -q co -d 3 mod2" \
"U 3/file2"
	    cd 1/mod1
	  else
	    dotest abspath-7d "${testcvs} -q co -d ${TESTDIR}/3 mod2" \
"U ${TESTDIR}/3/file2"
	  fi # remote workaround
	  dotest abspath-7e "${testcvs} -q update -d"

	  #
	  # FIXME: do other functions here (e.g. update /tmp/foo)
	  #

	  # Finished with all tests.  Cleanup.
	  dokeep
	  cd ../..
	  rm -r 1 2 3
	  modify_repo rm -rf $CVSROOT_DIRNAME/mod1 $CVSROOT_DIRNAME/mod2
	  ;;



	abspath2)
	  # More absolute path checks.  The following used to attempt to create
	  # directories in /:
	  #
	  # $ cvs -d:fork:/cvsroot co /foo
	  # cvs checkout: warning: cannot make directory CVS in /: Permission denied
	  # cvs [checkout aborted]: cannot make directory /foo: Permission denied
	  # $
	  #
	  # The -z9 in this test also checks for an old server bug where the
	  # server would block indefinitely attempting to read an EOF from the
	  # client in the compression buffer shutdown routine.
	  dotest_fail abspath2-1 "$testcvs -z9 co /foo" \
"$CPROG \[checkout aborted\]: Absolute module reference invalid: \`/foo'" \
"$SPROG \[server aborted\]: Absolute module reference invalid: \`/foo'
$CPROG \[checkout aborted\]: end of file from server (consult above messages if any)"
	  ;;



	toplevel)
	  # test the feature that cvs creates a CVS subdir also for
	  # the toplevel directory

	  # First set the TopLevelAdmin setting.
	  mkdir 1; cd 1
	  dotest toplevel-1a "${testcvs} -q co CVSROOT/config" \
"U CVSROOT/config"
	  cd CVSROOT
	  echo "TopLevelAdmin=yes" >>config
	  dotest toplevel-1b "${testcvs} -q ci -m yes-top-level" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  cd ../..
	  rm -r 1

	  mkdir 1; cd 1
	  dotest toplevel-1 "${testcvs} -q co -l ." ''
	  mkdir top-dir second-dir
	  dotest toplevel-2 "${testcvs} add top-dir second-dir" \
"Directory ${CVSROOT_DIRNAME}/top-dir added to the repository
Directory ${CVSROOT_DIRNAME}/second-dir added to the repository"
	  cd top-dir

	  touch file1
	  dotest toplevel-3 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest toplevel-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/top-dir/file1,v  <--  file1
initial revision: 1\.1"
	  cd ..

	  cd second-dir
	  touch file2
	  dotest toplevel-3s "${testcvs} add file2" \
"${SPROG} add: scheduling file .file2. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest toplevel-4s "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/second-dir/file2,v  <--  file2
initial revision: 1\.1"

	  cd ../..
	  rm -r 1; mkdir 1; cd 1
	  dotest toplevel-5 "${testcvs} co top-dir" \
"${SPROG} checkout: Updating top-dir
U top-dir/file1"

	  dotest toplevel-6 "${testcvs} update top-dir" \
"${SPROG} update: Updating top-dir"
	  dotest toplevel-7 "${testcvs} update"  \
"${SPROG} update: Updating \.
${SPROG} update: Updating top-dir"

	  dotest toplevel-8 "${testcvs} update -d top-dir" \
"${SPROG} update: Updating top-dir"
	  # There is some sentiment that
	  #   "${SPROG} update: Updating \.
          #   ${SPROG} update: Updating top-dir"
	  # is correct but it isn't clear why that would be correct instead
	  # of the remote CVS behavior (which also updates CVSROOT).
	  #
	  # The DOTSTAR matches of a bunch of lines like
	  # "U CVSROOT/checkoutlist".  Trying to match them more precisely
	  # seemed to cause trouble.  For example CVSROOT/cvsignore will
	  # be present or absent depending on whether we ran the "ignore"
	  # test or not.
	  dotest toplevel-9 "${testcvs} update -d" \
"${SPROG} update: Updating \.
${SPROG} update: Updating CVSROOT
${DOTSTAR}
${SPROG} update: Updating top-dir"

	  cd ..
	  rm -r 1; mkdir 1; cd 1
	  dotest toplevel-10 "${testcvs} co top-dir" \
"${SPROG} checkout: Updating top-dir
U top-dir/file1"

	  # This tests more or less the same thing, in a particularly
	  # "real life" example.
	  dotest toplevel-11 "${testcvs} -q update -d second-dir" \
"U second-dir/file2"

	  # Now remove the CVS directory (people may do this manually,
	  # especially if they formed their habits with CVS
	  # 1.9 and older, which didn't create it.  Or perhaps the working
	  # directory itself was created with 1.9 or older).
	  rm -r CVS
	  # Now set the permissions so we can't recreate it.
	  if test -n "$remotehost"; then
	    # Cygwin again.
	    $CVS_RSH $remotehost "chmod -w $TESTDIR/1"
	  else
	    chmod -w ../1
	  fi
	  # Now see whether CVS has trouble because it can't create CVS.
	  # First string is for local, second is for remote.
	  dotest toplevel-12 "${testcvs} co top-dir" \
"${SPROG} checkout: warning: cannot make directory CVS in \.: Permission denied
${SPROG} checkout: Updating top-dir" \
"${CPROG} checkout: warning: cannot make directory CVS in \.: Permission denied
${CPROG} checkout: in directory \.:
${CPROG} checkout: cannot open CVS/Entries for reading: No such file or directory
${SPROG} checkout: Updating top-dir"

	  chmod +w ../1

	  dokeep
	  restore_adm
	  cd ..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/top-dir \
			     $CVSROOT_DIRNAME/second-dir
	  ;;



	toplevel2)
	  # Similar to toplevel, but test the case where TopLevelAdmin=no.

	  # First set the TopLevelAdmin setting.
	  mkdir 1; cd 1
	  dotest toplevel2-1a "${testcvs} -q co CVSROOT/config" \
"U CVSROOT/config"
	  cd CVSROOT
	  echo "TopLevelAdmin=no" >>config
	  dotest toplevel2-1b "$testcvs -q ci -m no-top-level" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  cd ../..
	  rm -r 1

	  # Now set up some directories and subdirectories
	  mkdir 1; cd 1
	  dotest toplevel2-1 "${testcvs} -q co -l ." ''
	  mkdir top-dir second-dir
	  dotest toplevel2-2 "${testcvs} add top-dir second-dir" \
"Directory ${CVSROOT_DIRNAME}/top-dir added to the repository
Directory ${CVSROOT_DIRNAME}/second-dir added to the repository"
	  cd top-dir

	  touch file1
	  dotest toplevel2-3 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest toplevel2-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/top-dir/file1,v  <--  file1
initial revision: 1\.1"
	  cd ..

	  cd second-dir
	  touch file2
	  dotest toplevel2-3s "${testcvs} add file2" \
"${SPROG} add: scheduling file .file2. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest toplevel2-4s "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/second-dir/file2,v  <--  file2
initial revision: 1\.1"

	  cd ../..
	  rm -r 1; mkdir 1; cd 1
	  dotest toplevel2-5 "${testcvs} co top-dir" \
"${SPROG} checkout: Updating top-dir
U top-dir/file1"

	  dotest toplevel2-6 "${testcvs} update top-dir" \
"${SPROG} update: Updating top-dir"
	  dotest toplevel2-7 "${testcvs} update"  \
"${SPROG} update: Updating top-dir"

	  dotest toplevel2-8 "${testcvs} update -d top-dir" \
"${SPROG} update: Updating top-dir"
	  # Contrast this with toplevel-9, which has TopLevelAdmin=yes.
	  dotest toplevel2-9 "${testcvs} update -d" \
"${SPROG} update: Updating top-dir"

	  cd ..
	  rm -r 1; mkdir 1; cd 1
	  dotest toplevel2-10 "${testcvs} co top-dir" \
"${SPROG} checkout: Updating top-dir
U top-dir/file1"
	  # This tests more or less the same thing, in a particularly
	  # "real life" example.  With TopLevelAdmin=yes, this command
	  # would give us second-dir and CVSROOT directories too.
	  dotest toplevel2-11 "${testcvs} -q update -d" ""

	  dokeep
	  cd ..
	  restore_adm
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/top-dir \
			     $CVSROOT_DIRNAME/second-dir
	  ;;



	rstar-toplevel)
	  # This test used to confirm a bug that existed in the r* commands
	  # run against the top-level project prior to CVS 1.11.18 & 1.12.10.
	  #
	  # The assertion failure was something like:
	  # do_recursion: Assertion \`strstr (repository, \"/\./\") == ((void \*)0)' failed\..*"
	  dotest rstar-toplevel-1 "$testcvs -q rlog ." \
"
RCS file: $CVSROOT_DIRNAME/CVSROOT$DOTSTAR"

	  dokeep
	;;



	trailingslashes)
	  # Some tests of CVS's reactions to path specifications containing
	  # trailing slashes.
	  mkdir trailingslashes; cd trailingslashes
	  dotest trailingslashes-init-1 "$testcvs -Q co -ldt ."
	  dotest trailingslashes-init-2 "$testcvs -Q co -dt2 ."
	  cd t
	  echo "Ahh'll be baaack." >topfile
	  dotest trailingslashes-init-3 "$testcvs -Q add topfile"
	  dotest trailingslashes-init-4 "$testcvs -Q ci -mto-top"

	  # First, demonstrate the usual case.
	  cd ../t2
	  dotest trailingslashes-1 "$testcvs -q up CVSROOT"
	  dotest_fail trailingslashes-1a "test -f topfile"

	  # FIXCVS:
	  # Now the one that fails in remote mode.
	  # This highlights one of the failure cases mentioned in TODO item
	  # #205.
	  if $remote; then
		  dotest trailingslashes-2 "$testcvs -q up CVSROOT/" \
"U topfile"
		  dotest trailingslashes-2a "test -f topfile"
	  else
		  dotest trailingslashes-2 "$testcvs -q up CVSROOT/"
		  dotest_fail trailingslashes-2a "test -f topfile"
	  fi

	  dokeep
	  cd ../..
	  rm -rf trailingslashes
	  modify_repo rm -rf $CVSROOT_DIRNAME/topfile,v
	  ;;



        checkout_repository)
          dotest_fail checkout_repository-1 \
"${testcvs} co -d ${CVSROOT_DIRNAME} CVSROOT" \
"${CPROG} \[checkout aborted\]: Cannot check out files into the repository itself" \
"${SPROG} \[checkout aborted\]: absolute pathnames invalid for server (specified \`${CVSROOT_DIRNAME}')"

	  # The behavior of the client/server test below should be correct.
	  # The CVS client currently has no way of knowing that the client and
	  # server are the same machine and thus skips the $CVSROOT checks.
	  # I think checking for this case in CVS would be bloat since this
	  # should be a fairly rare occurance.
	  cd ${CVSROOT_DIRNAME}
          dotest_fail checkout_repository-2 "${testcvs} co CVSROOT" \
"${CPROG} \[checkout aborted\]: Cannot check out files into the repository itself" \
"${SPROG} checkout: Updating CVSROOT
${CPROG} checkout: move away \`CVSROOT/access'; it is in the way
C CVSROOT/access
${CPROG} checkout: move away \`CVSROOT/aclconfig'; it is in the way
C CVSROOT/aclconfig
${CPROG} checkout: move away \`CVSROOT/checkoutlist'; it is in the way
C CVSROOT/checkoutlist
${CPROG} checkout: move away \`CVSROOT/commitinfo'; it is in the way
C CVSROOT/commitinfo
${CPROG} checkout: move away \`CVSROOT/config'; it is in the way
C CVSROOT/config
${CPROG} checkout: move away \`CVSROOT/cvswrappers'; it is in the way
C CVSROOT/cvswrappers
${CPROG} checkout: move away \`CVSROOT/group'; it is in the way
C CVSROOT/group
${CPROG} checkout: move away \`CVSROOT/loginfo'; it is in the way
C CVSROOT/loginfo
${CPROG} checkout: move away \`CVSROOT/modules'; it is in the way
C CVSROOT/modules
${CPROG} checkout: move away \`CVSROOT/notify'; it is in the way
C CVSROOT/notify
${CPROG} checkout: move away \`CVSROOT/postadmin'; it is in the way
C CVSROOT/postadmin
${CPROG} checkout: move away \`CVSROOT/postproxy'; it is in the way
C CVSROOT/postproxy
${CPROG} checkout: move away \`CVSROOT/posttag'; it is in the way
C CVSROOT/posttag
${CPROG} checkout: move away \`CVSROOT/postwatch'; it is in the way
C CVSROOT/postwatch
${CPROG} checkout: move away \`CVSROOT/preproxy'; it is in the way
C CVSROOT/preproxy
${CPROG} checkout: move away \`CVSROOT/rcsinfo'; it is in the way
C CVSROOT/rcsinfo
${CPROG} checkout: move away \`CVSROOT/taginfo'; it is in the way
C CVSROOT/taginfo
${CPROG} checkout: move away \`CVSROOT/verifymsg'; it is in the way
C CVSROOT/verifymsg"

          dotest checkout_repository-3 \
"${testcvs} co -p CVSROOT/modules >/dev/null" \
"===================================================================
Checking out CVSROOT/modules
RCS:  ${CVSROOT_DIRNAME}/CVSROOT/modules,v
VERS: 1\.[0-9]*
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*"

	  dokeep
	  cd $TESTDIR
          ;;



	mflag)
	  for message in '' ' ' '	
           ' '    	  	test' ; do
	    # Set up
	    mkdir a-dir; cd a-dir
	    # Test handling of -m during import
	    echo testa >>test
	    if ${testcvs} import -m "$message" a-dir A A1 >>${LOGFILE} 2>&1;then
	        pass 156
	    else
		fail 156
	    fi
	    # Must import twice since the first time uses inline code that
	    # avoids RCS call.
	    echo testb >>test
	    if ${testcvs} import -m "$message" a-dir A A2 >>${LOGFILE} 2>&1;then
		pass 157
	    else
		fail 157
	    fi
	    # Test handling of -m during ci
	    cd ..; rm -r a-dir
	    if ${testcvs} co a-dir >>${LOGFILE} 2>&1; then
		pass 158
	    else
		fail 158
	    fi
	    cd a-dir
	    echo testc >>test
	    if ${testcvs} ci -m "$message" >>${LOGFILE} 2>&1; then
		pass 159
	    else
		fail 159
	    fi
	    # Test handling of -m during rm/ci
	    rm test;
	    if ${testcvs} rm test >>${LOGFILE} 2>&1; then
		pass 160
	    else
		fail 160
	    fi
	    if ${testcvs} ci -m "$message" >>${LOGFILE} 2>&1; then
		pass 161
	    else
		fail 161
	    fi

	    dokeep
	    # Clean up
	    cd ..
	    rm -r a-dir
	    modify_repo rm -rf $CVSROOT_DIRNAME/a-dir
	  done
	  ;;



	editor)
	  # More tests of log messages, in this case the ability to
	  # run an external editor.
	  # TODO:
	  #   * also test $EDITOR, $CVSEDITOR, &c.
	  #   * test what happens if up-to-date check fails.

	  # Our "editor" puts "x" at the start of each line, so we
	  # can see the "CVS:" lines.
	  cat >${TESTDIR}/editme <<EOF
#!${TESTSHELL}
sleep 1
sed <\$1 -e 's/^/x/' >${TESTDIR}/edit.new
mv ${TESTDIR}/edit.new \$1
exit 0
EOF
	  chmod +x ${TESTDIR}/editme

	  mkdir 1; cd 1
	  dotest editor-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest editor-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  touch file1 file2
	  dotest editor-3 "${testcvs} add file1 file2" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: scheduling file .file2. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  dotest editor-4 "${testcvs} -e ${TESTDIR}/editme -q ci" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.1"
	  dotest editor-5 "${testcvs} -q tag -b br" "T file1
T file2"
	  dotest editor-6 "${testcvs} -q update -r br" ''
	  echo modify >>file1
	  dotest editor-7 "${testcvs} -e ${TESTDIR}/editme -q ci" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.1; previous revision: 1\.1"
	  # OK, now we want to make sure "ci -r" puts in the branch
	  # where appropriate.  Note that we can check in on the branch
	  # without being on the branch, because there is not a revision
	  # already on the branch.  If there were a revision on the branch,
	  # CVS would correctly give an up-to-date check failed.
	  dotest editor-8 "${testcvs} -q update -A" "U file1"
	  echo add a line >>file2
	  dotest editor-9 "${testcvs} -q -e ${TESTDIR}/editme ci -rbr file2" \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.1\.2\.1; previous revision: 1\.1"

	  dotest editor-log-file1 "${testcvs} log -N file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch:
locks: strict
access list:
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
branches:  1\.1\.2;
x
xCVS: ----------------------------------------------------------------------
xCVS: Enter Log.  Lines beginning with .CVS:. are removed automatically
xCVS:
xCVS: Committing in .
xCVS:
xCVS: Added Files:
xCVS: 	file1 file2
xCVS: ----------------------------------------------------------------------
----------------------------
revision 1\.1\.2\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
x
xCVS: ----------------------------------------------------------------------
xCVS: Enter Log.  Lines beginning with .CVS:. are removed automatically
xCVS:
xCVS: Committing in .
xCVS:
xCVS: Modified Files:
xCVS:  Tag: br
xCVS: 	file1
xCVS: ----------------------------------------------------------------------
============================================================================="

	  # The only difference between the two expect strings is the
	  # presence or absence of "Committing in ." for 1.1.2.1.
	  dotest editor-log-file2 "${testcvs} log -N file2" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
Working file: file2
head: 1\.1
branch:
locks: strict
access list:
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
branches:  1\.1\.2;
x
xCVS: ----------------------------------------------------------------------
xCVS: Enter Log.  Lines beginning with .CVS:. are removed automatically
xCVS:
xCVS: Committing in .
xCVS:
xCVS: Added Files:
xCVS: 	file1 file2
xCVS: ----------------------------------------------------------------------
----------------------------
revision 1\.1\.2\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
x
xCVS: ----------------------------------------------------------------------
xCVS: Enter Log.  Lines beginning with .CVS:. are removed automatically
xCVS:
xCVS: Modified Files:
xCVS:  Tag: br
xCVS: 	file2
xCVS: ----------------------------------------------------------------------
=============================================================================" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
Working file: file2
head: 1\.1
branch:
locks: strict
access list:
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
branches:  1\.1\.2;
x
xCVS: ----------------------------------------------------------------------
xCVS: Enter Log.  Lines beginning with .CVS:. are removed automatically
xCVS:
xCVS: Committing in .
xCVS:
xCVS: Added Files:
xCVS: 	file1 file2
xCVS: ----------------------------------------------------------------------
----------------------------
revision 1\.1\.2\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
x
xCVS: ----------------------------------------------------------------------
xCVS: Enter Log.  Lines beginning with .CVS:. are removed automatically
xCVS:
xCVS: Committing in .
xCVS:
xCVS: Modified Files:
xCVS:  Tag: br
xCVS: 	file2
xCVS: ----------------------------------------------------------------------
============================================================================="

	  # Test CVS's response to an unchanged log message
	  cat >${TESTDIR}/editme <<EOF
#!${TESTSHELL}
sleep 1
exit 0
EOF
	  chmod +x ${TESTDIR}/editme
	  dotest_fail editor-emptylog-1 "echo a |${testcvs} -e ${TESTDIR}/editme ci -f file1" \
"
Log message unchanged or not specified
a)bort, c)ontinue, e)dit, !)reuse this message unchanged for remaining dirs
Action: (abort) ${CPROG} \[commit aborted\]: aborted by user"

	  # Test CVS's response to an empty log message
	  cat >${TESTDIR}/editme <<EOF
#!${TESTSHELL}
sleep 1
cat /dev/null >\$1
exit 0
EOF
	  chmod +x ${TESTDIR}/editme
	  dotest_fail editor-emptylog-1a "echo a |${testcvs} -e ${TESTDIR}/editme ci -f file1" \
"
Log message unchanged or not specified
a)bort, c)ontinue, e)dit, !)reuse this message unchanged for remaining dirs
Action: (abort) ${CPROG} \[commit aborted\]: aborted by user"

	  # Test CVS's response to a log message with one blank line
	  cat >${TESTDIR}/editme <<EOF
#!${TESTSHELL}
sleep 1
echo >\$1
exit 0
EOF
	  chmod +x ${TESTDIR}/editme
	  dotest_fail editor-emptylog-1b "echo a |${testcvs} -e ${TESTDIR}/editme ci -f file1" \
"
Log message unchanged or not specified
a)bort, c)ontinue, e)dit, !)reuse this message unchanged for remaining dirs
Action: (abort) ${CPROG} \[commit aborted\]: aborted by user"

	  # Test CVS's response to a log message with only comments
	  cat >${TESTDIR}/editme <<EOF
#!${TESTSHELL}
sleep 1
cat \$1 >${TESTDIR}/edit.new
mv ${TESTDIR}/edit.new \$1
exit 0
EOF
	  chmod +x ${TESTDIR}/editme
	  dotest_fail editor-emptylog-1c "echo a |${testcvs} -e ${TESTDIR}/editme ci -f file1" \
"
Log message unchanged or not specified
a)bort, c)ontinue, e)dit, !)reuse this message unchanged for remaining dirs
Action: (abort) ${CPROG} \[commit aborted\]: aborted by user"

	  # Test CVS's response to a log message that is zero bytes
	  # in length. This caused core dumps in cvs 1.11.5 on Solaris
	  # hosts.
	  cd ..
	  dotest editor-emptylog-continue-1 "${testcvs} -q co CVSROOT/loginfo" \
"U CVSROOT/loginfo"

          cd CVSROOT
	  cat <<\EOF >>loginfo
DEFAULT (echo Start-Log;cat;echo End-Log) >> $CVSROOT/CVSROOT/commitlog
EOF
	  dotest editor-emptylog-continue-2 "$testcvs -Q ci -mloggem"

	  cd ../first-dir
	  cat >${TESTDIR}/editme <<EOF
#!${TESTSHELL}
sleep 1
cp /dev/null \$1
exit 1
EOF
	  chmod +x ${TESTDIR}/editme
	  dotest editor-emptylog-continue-3 "echo c |${testcvs} -e ${TESTDIR}/editme ci -f file1" \
"${CPROG} commit: warning: editor session failed

Log message unchanged or not specified
a)bort, c)ontinue, e)dit, !)reuse this message unchanged for remaining dirs
Action: (abort) ${CVSROOT_DIRNAME}/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1"
	  # The loginfo Log message should be an empty line and not "(null)"
	  # which is what some fprintf() implementations do with "%s"
	  # format and a NULL pointer...
	  if $remote; then
	    dotest editor-emptylog-continue-4r \
"cat $CVSROOT_DIRNAME/CVSROOT/commitlog" \
"Start-Log
Update of $CVSROOT_DIRNAME/CVSROOT
In directory $hostname:$TMPDIR/cvs-serv[0-9a-z]*

Modified Files:
	loginfo 
Log Message:
loggem
End-Log
Start-Log
Update of $CVSROOT_DIRNAME/first-dir
In directory $hostname:$TMPDIR/cvs-serv[0-9a-z]*

Modified Files:
	file1 
Log Message:

End-Log"
          else
	    dotest editor-emptylog-continue-4 \
"cat $CVSROOT_DIRNAME/CVSROOT/commitlog" \
"Start-Log
Update of $CVSROOT_DIRNAME/CVSROOT
In directory $hostname:$TESTDIR/1/CVSROOT

Modified Files:
	loginfo 
Log Message:
loggem
End-Log
Start-Log
Update of $CVSROOT_DIRNAME/first-dir
In directory $hostname:$TESTDIR/1/first-dir

Modified Files:
	file1 
Log Message:

End-Log"
         fi
	  # There should have an empty log message at this point
	  dotest editor-emptylog-continue-5 "${testcvs} log -N -r1.2 file1" \
"
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.2
branch:
locks: strict
access list:
keyword substitution: kv
total revisions: 3;	selected revisions: 1
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: +0 -0;  commitid: ${commitid};
\*\*\* empty log message \*\*\*
============================================================================="

	  # clean up
	  dokeep
	  # restore the default loginfo script
	  restore_adm
	  cd ../..
	  rm -r 1
	  rm $TESTDIR/editme
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	env)
	  # Test to see if the CVS_PID environment variable is being set
	  mkdir ${TESTDIR}/env
	  cd ${TESTDIR}/env
	  dotest env-1 "${testcvs} -Q co . >>${LOGFILE}" ''

	  cat > ${TESTDIR}/env/test-cvs-pid <<EOF
#!${TESTSHELL}
if test "x\$CVS_PID" != "x"; then
  # In local mode, there is no directory with the pid in it for use.
  # In remote mode the CVS_PID will be the parent process of the
  # cvs process that runs the commitinfo script.
  if test "x$remote" = "x:" ; then
    ppid=\`pwd | sed -e 's,.*/cvs-serv,,'\`
  else
    # This assumes that the -l switch puts PPID in the banner and does
    # not run the elements together such that whitespace surrounds the
    # pid and ppid in the output. This could be made slightly simpler
    # if all hosts had a 'ps' command that supported the -p switch,
    # but Solaris 7 /usr/ucb/ps does not and that may be the one we use.
    # It is because this is so messy that the CVS_PID feature exists.
    pid=\$\$
    pidcmd="ps -o pid,ppid -p \$pid || ps -el || ps -al"
    if echo \$pidcmd | sh >pid.stdout 2> pid.stderr; then
      ppid=\`cat pid.stdout |\\
      awk '/PPID/ { for (i=1; i <= NF; i++) {
                      if (\$i == "PPID") ppidx = i; 
                      if (\$i == "PID") pidx = i;
		    }
                    next; 
                  }
                  { print \$pidx " " \$ppidx }' |\\
      grep "^\$pid " |\\
      awk '{ print \$NF }'\`
    else
      ppid=unkown
    fi
  fi
  if test "x\$ppid" = "x\${CVS_PID}"; then
    # The PID looks okay to me
    # Clean up any temporary files
    rm -f pid.stdout pid.stderr
    exit 0
  else
    echo The environment variable CVS_PID is not properly set.
    echo It should have been set to \'\$ppid\' but instead was \'\$CVS_PID\'
    echo It is possible that this test is broken for your host.
    echo Current pid: \$pid
    [ -n "\$pidcmd" ] && echo "Command: \$pidcmd"
    [ -s pid.stdout ] && echo Standard Out: && cat pid.stdout
    [ -s pid.stderr ] && echo Standard Error: && cat pid.stderr
    exit 1
  fi
else
  echo The environment variable CVS_PID is not set.
  exit 1
fi
EOF
	  if test -n "$remotehost"; then
	    $CVS_RSH $remotehost "chmod +x ${TESTDIR}/env/test-cvs-pid"
	  else
	    chmod +x ${TESTDIR}/env/test-cvs-pid
	  fi
	  cd CVSROOT
	  echo "^env ${TESTDIR}/env/test-cvs-pid %r/%p %s" >>commitinfo
	  dotest env-2 "${testcvs} -q ci -m test-pid commitinfo" \
"${CVSROOT_DIRNAME}/CVSROOT/commitinfo,v  <--  commitinfo
new revision: 1\.2; previous revision: 1\.1
${SPROG} commit: Rebuilding administrative file database"
	  cd ..
	  mkdir env
	  dotest env-3 "${testcvs} -q add env" \
"Directory ${CVSROOT_DIRNAME}/env added to the repository"
	  cd env
	  echo testing >file1
	  dotest env-4 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest env-5 "${testcvs} -q commit -m test-pid" \
"${CVSROOT_DIRNAME}/env/file1,v  <--  file1
initial revision: 1\.1"

	  dokeep
	  # undo commitinfo changes
	  restore_adm
	  cd ../..
	  rm -fr $TESTDIR/env
	  modify_repo rm -rf $CVSROOT_DIRNAME/env
	  ;;



	errmsg1)
	  modify_repo mkdir $CVSROOT_DIRNAME/1dir
	  mkdir 1
	  cd 1
	  dotest errmsg1-init-1 "$testcvs -Q co 1dir"
	  cd 1dir
	  touch foo
	  dotest errmsg-init-2 "$testcvs -Q add foo"
	  if ${testcvs} ci -m added >>${LOGFILE} 2>&1; then
	      pass 164
	  else
	      fail 164
	  fi
	  cd ../..
	  mkdir 2
	  cd 2
	  if ${testcvs} -q co 1dir >>${LOGFILE}; then
	      pass 165
	  else
	      fail 165
	  fi
	  chmod a-w 1dir
	  cd ../1/1dir
	  rm foo;
	  if ${testcvs} rm foo >>${LOGFILE} 2>&1; then
	      pass 166
	  else
	      fail 166
	  fi
	  if ${testcvs} ci -m removed >>${LOGFILE} 2>&1; then
	      pass 167
	  else
	      fail 167
	  fi

	  cd ../../2/1dir
	  # The second case in the local and remote versions of errmsg1-168
	  # below happens on Cygwin under Windows, where write privileges
	  # aren't enforced properly.
	  if $remote; then
	    dotest errmsg1-168r "${testcvs} -q update" \
"${SPROG} update: \`foo' is no longer in the repository
$CPROG update: unable to remove \./foo: Permission denied" \
"${SPROG} update: \`foo' is no longer in the repository"
	  else
	    dotest errmsg1-168 "${testcvs} -q update" \
"${SPROG} update: \`foo' is no longer in the repository
${SPROG} update: unable to remove foo: Permission denied" \
"${SPROG} update: \`foo' is no longer in the repository"
	  fi

	  dokeep
	  cd ..
	  chmod u+w 1dir
	  cd ..
	  rm -r 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/1dir
	  ;;



	errmsg2)
	  # More tests of various miscellaneous error handling,
	  # and cvs add behavior in general.
	  # See also test basicb-4a, concerning "cvs ci CVS".
	  # Too many tests to mention test the simple cases of
	  # adding files and directories.
	  # Test basicb-2a10 tests cvs -n add.

	  # First the usual setup; create a directory first-dir.
	  mkdir 1; cd 1
	  dotest errmsg2-1 "$testcvs -q co -l ."
	  mkdir first-dir
	  dotest errmsg2-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
          cd first-dir
	  dotest_fail errmsg2-3 "${testcvs} add CVS" \
"${CPROG} add: cannot add special file .CVS.; skipping"
	  touch file1
	  # For the most part add returns a failure exitstatus if
	  # there are any errors, even if the remaining files are
	  # processed without incident.  The "cannot add
	  # special file" message fits this pattern, at
	  # least currently.
	  dotest_fail errmsg2-4 "${testcvs} add CVS file1" \
"${CPROG} add: cannot add special file .CVS.; skipping
${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  # I'm not sure these tests completely convey the various strange
	  # behaviors that CVS had before it specially checked for "." and
	  # "..".  Suffice it to say that these are unlikely to work right
	  # without a special case.
	  dotest_fail errmsg2-5 "${testcvs} add ." \
"${CPROG} add: cannot add special file .\..; skipping"
	  dotest_fail errmsg2-6 "${testcvs} add .." \
"${CPROG} add: cannot add special file .\.\..; skipping"
	  # Make sure that none of the error messages left droppings
	  # which interfere with normal operation.
	  dotest errmsg2-7 "${testcvs} -q ci -m add-file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  mkdir sdir
	  cd ..
	  dotest errmsg2-8 "${testcvs} add first-dir/sdir" \
"Directory ${CVSROOT_DIRNAME}/first-dir/sdir added to the repository"
	  # while we're here... check commit with no CVS directory
	  dotest_fail errmsg2-8a "${testcvs} -q ci first-dir nonexistant" \
"${CPROG} commit: nothing known about .nonexistant'
${CPROG} \[commit aborted\]: correct above errors first!"
	  dotest_fail errmsg2-8b "$testcvs -q ci nonexistant first-dir" \
"$CPROG commit: nothing known about .nonexistant'
$CPROG \[commit aborted\]: correct above errors first!"
	  dotest errmsg2-8c "$testcvs -q ci first-dir"

	  cd first-dir

	  touch file10
	  mkdir sdir10
	  dotest errmsg2-10 "${testcvs} add file10 sdir10" \
"${SPROG} add: scheduling file .file10. for addition
Directory ${CVSROOT_DIRNAME}/first-dir/sdir10 added to the repository
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest errmsg2-11 "${testcvs} -q ci -m add-file10" \
"$CVSROOT_DIRNAME/first-dir/file10,v  <--  file10
initial revision: 1\.1"
	  # Try to see that there are no droppings left by
	  # any of the previous tests.
	  dotest errmsg2-12 "${testcvs} -q update" ""

	  # Now test adding files with '/' in the name, both one level
	  # down and more than one level down.
	  cd ..
	  mkdir first-dir/sdir10/ssdir
	  dotest errmsg2-13 "${testcvs} add first-dir/sdir10/ssdir" \
"Directory ${CVSROOT_DIRNAME}/first-dir/sdir10/ssdir added to the repository"

	  touch first-dir/sdir10/ssdir/ssfile
	  dotest errmsg2-14 \
	    "${testcvs} add first-dir/sdir10/ssdir/ssfile" \
"${SPROG} add: scheduling file .first-dir/sdir10/ssdir/ssfile. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  touch first-dir/file15
	  dotest errmsg2-15 "${testcvs} add first-dir/file15" \
"${SPROG} add: scheduling file .first-dir/file15. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"

	  # Now the case where we try to give it a directory which is not
	  # under CVS control.
	  mkdir bogus-dir
	  touch bogus-dir/file16
	  # FIXCVS: The first message, from local CVS, is nice.  The second one
	  # is not nice; would be good to fix remote CVS to give a clearer
	  # message (e.g. the one from local CVS).  But at least it is an
	  # error message.
	  dotest_fail errmsg2-16 "${testcvs} add bogus-dir/file16" \
"${SPROG} add: in directory \`bogus-dir':
${SPROG} \[add aborted\]: there is no version here; do .${SPROG} checkout. first" \
"${CPROG} add: cannot open CVS/Entries for reading: No such file or directory
${CPROG} \[add aborted\]: no repository"
	  rm -r bogus-dir

	  # One error condition we don't test for is trying to add a file
	  # or directory which already is there.

	  dotest errmsg2-17 "${testcvs} -q ci -m checkin" \
"$CVSROOT_DIRNAME/first-dir/file15,v  <--  first-dir/file15
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/sdir10/ssdir/ssfile,v  <--  first-dir/sdir10/ssdir/ssfile
initial revision: 1\.1"
	  dotest errmsg2-18 "${testcvs} -Q tag test" ''

	  # trying to import the repository

	  if $remote; then :; else
	    cd ${CVSROOT_DIRNAME}
	    dotest_fail errmsg2-20 "${testcvs} import -mtest . A B" \
"${SPROG} \[import aborted\]: attempt to import the repository"
	    dotest_fail errmsg2-21 "${testcvs} import -mtest first-dir A B" \
"${SPROG} \[import aborted\]: attempt to import the repository"
	  fi

	  dokeep
	  cd ..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	errmsg3)
	  # Test the *PANIC* message caused by missing administration files
	  mkdir errmsg3
	  cd errmsg3
	  mkdir CVS
	  dotest_fail errmsg3-1 "${testcvs} -q up" \
"${CPROG} update: in directory \`.':
${CPROG} update: CVS directory found without administrative files\.
${CPROG} update: Use CVS to create the CVS directory, or rename the
${CPROG} update: directory if it is intended to store something
${CPROG} update: besides CVS administrative files\.
${CPROG} \[update aborted\]: \*PANIC\* administration files missing!"

	  dokeep
	  cd ..
	  rm -r errmsg3
	  ;;



	close-stdout)
	  # Ensure that cvs update -p FILE > /dev/full fails
	  # Perform this test IFF /dev/full is a writable character device.
	  if test -w /dev/full && test -c /dev/full; then
	    mkdir close-stdout
	    cd close-stdout
	    echo a > file
	    dotest close-stdout-1 "$testcvs -Q import -m. closeout X Y" ''
	    dotest close-stdout-2 "$testcvs -Q co closeout" ''
	    # Match either a bare `write error' or
	    # `write error: No space left on device',
	    # since closeout.c can produce both.
	    dotest_fail close-stdout-3 \
		"${testcvs} -Q update -p closeout/file > /dev/full" \
		"${CPROG} \[update aborted\]: write error.*"

	    dokeep
	    cd ..
	    rm -r close-stdout
	    modify_repo rm -rf $CVSROOT_DIRNAME/closeout
	  else
	    skip close-stdout '/dev/full is not available'
	  fi
	  ;;



	debug-log-nonfatal)
	  # Once upon a time, failure to create the debug log could be fatal.
          if $remote; then :; else
            remoteonly debug-log-nonfatal
	    continue
	  fi

	  mkdir $TESTDIR/unwritable
	  chmod a-w $TESTDIR/unwritable
	  if test -n "$CVS_CLIENT_LOG"; then
              save_CVS_CLIENT_LOG=$CVS_CLIENT_LOG
	  fi
	  CVS_CLIENT_LOG=$TESTDIR/unwritable/cvsclientlog
	  export CVS_CLIENT_LOG

	  dotest debug-log-nonfatal-1 \
"$testcvs -Q co -p CVSROOT/config >/dev/null" \
"$CPROG checkout: opening to-server logfile $TESTDIR/unwritable/cvsclientlog.in: Permission denied
$CPROG checkout: opening from-server logfile $TESTDIR/unwritable/cvsclientlog.out: Permission denied"

	  dokeep
	  rm -rf $TESTDIR/unwritable
	  unset CVS_CLIENT_LOG
	  if test -n "$save_CVS_CLIENT_LOG"; then
	      CVS_CLIENT_LOG=$save_CVS_CLIENT_LOG
	  fi
	  ;;



	adderrmsg)
	  # Test some of the error messages the 'add' command can return and
	  # their reactions to '-q'.

	  # First the usual setup; create a directory first-dir.
	  mkdir 1; cd 1
	  dotest adderrmsg-init1 "${testcvs} -q co -l ." ''
	  mkdir adderrmsg-dir
	  dotest adderrmsg-init2 "${testcvs} add adderrmsg-dir" \
"Directory ${CVSROOT_DIRNAME}/adderrmsg-dir added to the repository"
          cd adderrmsg-dir

	  # try to add the admin dir
	  dotest_fail adderrmsg-1 "${testcvs} add CVS" \
"${CPROG} add: cannot add special file .CVS.; skipping"
	  # might not want to see this message when you 'cvs add *'
	  dotest_fail adderrmsg-2 "${testcvs} -q add CVS" ""

	  # to test some other messages
	  touch file1
	  dotest adderrmsg-3 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"

	  # add it twice
	  dotest_fail adderrmsg-4 "${testcvs} add file1" \
"${SPROG} add: \`file1' has already been entered"
	  dotest_fail adderrmsg-5 "${testcvs} -q add file1" ""

	  dotest adderrmsg-6 "${testcvs} -q ci -madd" \
"$CVSROOT_DIRNAME/adderrmsg-dir/file1,v  <--  file1
initial revision: 1\.1"

	  # file in Entries & repository
	  dotest_fail adderrmsg-7 "${testcvs} add file1" \
"${SPROG} add: \`file1' already exists, with version number 1\.1"
	  dotest_fail adderrmsg-8 "${testcvs} -q add file1" ""

	  # clean up
	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/adderrmsg-dir
	  ;;



	opterrmsg)
	  # Test some option parsing error messages

	  # No init is necessary since these error messages are printed b4
	  # CVS looks for a sandbox or repository

	  # -z used to accept non-numeric arguments.  This bit someone who
	  # attempted `cvs -z -n up' when the -n was read as the argument to
	  # -z.
	  dotest_fail opterrmsg-1 "${testcvs} -z -n up" \
"${CPROG}: gzip compression level must be between 0 and 9"

	  # Some general -z checks
	  dotest_fail opterrmsg-2 "${testcvs} -z -1 up" \
"${CPROG}: gzip compression level must be between 0 and 9"
	  dotest_fail opterrmsg-3 "${testcvs} -z10 up" \
"${CPROG}: gzip compression level must be between 0 and 9"
	  ;;



	devcom)
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  mkdir 1
	  cd 1
	  dotest devcom-1 "$testcvs -q co first-dir"

	  cd first-dir
	  echo abb >abb
	  dotest devcom-2 "$testcvs add abb" \
"$SPROG add: scheduling file \`abb' for addition
$SPROG add: use \`$SPROG commit' to add this file permanently"

	  dotest devcom-3 "$testcvs -q ci -m added" \
"$CVSROOT_DIRNAME/first-dir/abb,v  <--  abb
initial revision: 1\.1"

	  dotest_fail devcom-4 "$testcvs watch" "Usage$DOTSTAR"

	  dotest devcom-5 "$testcvs watch on"

	  echo abc >abc
	  dotest devcom-6 "$testcvs add abc" \
"$SPROG add: scheduling file \`abc' for addition
$SPROG add: use \`$SPROG commit' to add this file permanently"

	  dotest devcom-7 "$testcvs -q ci -m added" \
"$CVSROOT_DIRNAME/first-dir/abc,v  <--  abc
initial revision: 1\.1"

	  cd ../..
	  mkdir 2
	  cd 2

	  dotest devcom-8 "$testcvs -q co first-dir" \
"U first-dir/abb
U first-dir/abc"

	  cd first-dir
	  dotest_fail devcom-9 "test -w abb"
	  dotest_fail devcom-9b "test -w abc"

	  dotest devcom-10 "$testcvs editors"
	  dotest devcom-11 "$testcvs edit abb"

	  # Here we test for the traditional ISO C ctime() date format.
	  # We assume the C locale; I guess that works provided we set
	  # LC_ALL at the start of this script but whether these
	  # strings should vary based on locale does not strike me as
	  # self-evident.
	  dotest devcom-12 "$testcvs editors" \
"abb	${username}	[SMTWF][uoehra][neduit] [JFAMSOND][aepuco][nbrylgptvc] [0-9 ][0-9] [0-9:]* [0-9][0-9][0-9][0-9] -0000	[-a-zA-Z_.0-9]*	${TESTDIR}/2/first-dir"

	  echo aaaa >>abb
	  dotest devcom-13 "$testcvs ci -m modify abb" \
"${CVSROOT_DIRNAME}/first-dir/abb,v  <--  abb
new revision: 1\.2; previous revision: 1\.1"

	  # Unedit of a file not being edited should be a noop.
	  dotest devcom-14 "$testcvs unedit abb" ''

	  dotest devcom-15 "$testcvs editors" ""

	  dotest_fail devcom-16 "test -w abb"

	  dotest devcom-17 "$testcvs edit abc"

	  # Unedit of an unmodified file.
	  dotest devcom-18 "$testcvs unedit abc"
	  dotest devcom-19 "$testcvs edit abc"

	  echo changedabc >abc
	  # Try to unedit a modified file; cvs should ask for confirmation
	  dotest devcom-20 "echo no | $testcvs unedit abc" \
"abc has been modified; revert changes? "

	  dotest devcom-21 "echo changedabc | cmp - abc"

	  # OK, now confirm the unedit
	  dotest devcom-22 "echo yes |$testcvs unedit abc" \
"abc has been modified; revert changes? "

	  dotest devcom-23 "echo abc |cmp - abc"

	  dotest devcom-24 "$testcvs watchers" ''

	  # FIXME: This probably should be an error message instead
	  # of silently succeeding and printing nothing.
	  dotest devcom-a-nonexist "$testcvs watchers nonexist" ''

	  dotest devcom-a1 "$testcvs watch add" ''
	  dotest devcom-a2 "$testcvs watchers" \
"abb	$username	edit	unedit	commit
abc	$username	edit	unedit	commit"
	  dotest devcom-a3 "$testcvs watch remove -a unedit abb" ''
	  dotest devcom-a4 "$testcvs watchers abb" \
"abb	$username	edit	commit"

	  # Check tagging and checking out while we have a CVS
	  # directory in the repository.
	  dotest devcom-t0 "${testcvs} -q tag tag" \
'T abb
T abc'
	  cd ../..
	  mkdir 3
	  cd 3

	  # Test commented out because the bug it tests for is not fixed
	  # The error is:
	  # cvs watchers: cannot open CVS/Entries for reading: No such file or directory
	  # cvs: ../../work/ccvs/src/fileattr.c:75: fileattr_read: Assertion `fileattr_stored_repos != ((void *)0)' failed.
:	  dotest devcom-t-nonexist "${testcvs} watchers nonexist" fixme

	  dotest devcom-t1 "${testcvs} -q co -rtag first-dir/abb" \
'U first-dir/abb'
	  cd ..
	  # Since first-dir/abb is readonly, use -f.
	  rm -rf 3

	  # Test checking out the directory rather than the file.
	  mkdir 3
	  cd 3
	  dotest devcom-t2 "${testcvs} -q co -rtag first-dir" \
'U first-dir/abb
U first-dir/abc'
	  cd ..
	  # Since the files are readonly, use -f.
	  rm -rf 3

	  # Now do it again, after removing the val-tags file created
	  # by devcom-t1 to force CVS to search the repository
	  # containing CVS directories.
	  rm ${CVSROOT_DIRNAME}/CVSROOT/val-tags
	  mkdir 3
	  cd 3
	  dotest devcom-t3 "${testcvs} -q co -rtag first-dir" \
'U first-dir/abb
U first-dir/abc'
	  cd ..
	  # Since the files are readonly, use -f.
	  rm -rf 3

	  # Now remove all the file attributes
	  cd 2/first-dir
	  dotest devcom-b0 "${testcvs} watch off" ''
	  dotest devcom-b1 "${testcvs} watch remove" ''
	  # Test that CVS 1.6 and earlier can handle the repository.
	  dotest_fail devcom-b2 "test -d ${CVSROOT_DIRNAME}/first-dir/CVS"

	  # Now test watching just some, not all, files.
	  dotest devcom-some0 "${testcvs} watch on abc" ''
	  cd ../..
	  mkdir 3
	  cd 3
	  dotest devcom-some1 "${testcvs} -q co first-dir" 'U first-dir/abb
U first-dir/abc'
	  dotest devcom-some2 "test -w first-dir/abb" ''
	  dotest_fail devcom-some3 "test -w first-dir/abc" ''

	  dokeep
	  cd ..
	  # Use -f because of the readonly files.
	  rm -rf 1 2 3
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	devcom2)
	  # More watch tests, most notably setting watches on
	  # files in various different states.
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  mkdir 1
	  cd 1
	  dotest devcom2-1 "${testcvs} -q co first-dir" ''
	  cd first-dir

	  # This should probably be an error; setting a watch on a totally
	  # unknown file is more likely to be a typo than intentional.
	  # But that isn't the currently implemented behavior.
	  dotest devcom2-2 "${testcvs} watch on w1" ''

	  touch w1 w2 w3 nw1
	  dotest devcom2-3 "${testcvs} add w1 w2 w3 nw1" "${DOTSTAR}"
	  # Letting the user set the watch here probably can be considered
	  # a feature--although it leads to a few potentially strange
	  # consequences like one user can set the watch and another actually
	  # adds the file.
	  dotest devcom2-4 "${testcvs} watch on w2" ''
	  dotest devcom2-5 "${testcvs} -Q ci -m add-them"

	  # Note that this test differs in a subtle way from devcom-some0;
	  # in devcom-some0 the watch is creating a new fileattr file, and
	  # here we are modifying an existing one.
	  dotest devcom2-6 "${testcvs} watch on w3" ''

	  # Now test that all the watches got set on the correct files
	  # FIXME: CVS should have a way to report whether watches are
	  # set, I think.  The "check it out and see if it read-only" is
	  # sort of OK, but is complicated by CVSREAD and doesn't help
	  # if the file is added and not yet committed or some such.
	  # Probably "cvs status" should report "watch: on" if watch is on
	  # (and nothing if watch is off, so existing behavior is preserved).
	  cd ../..
	  mkdir 2
	  cd 2
	  dotest devcom2-7 "${testcvs} -q co first-dir" 'U first-dir/nw1
U first-dir/w1
U first-dir/w2
U first-dir/w3'
	  dotest devcom2-8 "test -w first-dir/nw1" ''
	  dotest_fail devcom2-9 "test -w first-dir/w1" ''
	  dotest_fail devcom2-10 "test -w first-dir/w2" ''
	  dotest_fail devcom2-11 "test -w first-dir/w3" ''

	  cd first-dir
	  # OK, now we want to try files in various states with cvs edit.
	  dotest_fail devcom2-12 "$testcvs edit w4" \
"${CPROG} edit: no such file w4; ignored"
	  # Try the same thing with a per-directory watch set.
	  dotest devcom2-13 "${testcvs} watch on" ''
	  dotest_fail devcom2-14 "$testcvs edit w5" \
"${CPROG} edit: no such file w5; ignored"
	  dotest devcom2-15 "${testcvs} editors" ''
	  dotest devcom2-16 "${testcvs} editors w4" ''
	  # Make sure there are no droppings lying around
	  dotest devcom2-17 "cat ${CVSROOT_DIRNAME}/first-dir/CVS/fileattr" \
"Fw1	_watched=
Fw2	_watched=
Fw3	_watched=
Fnw1	_watched=
D	_watched="
	  cd ..

	  # Do a little error testing
	  dotest devcom2-18 "${testcvs} -q co -d first+dir first-dir" \
"U first${PLUS}dir/nw1
U first${PLUS}dir/w1
U first${PLUS}dir/w2
U first${PLUS}dir/w3"
	  cd first+dir
	  dotest_fail devcom2-19 "${testcvs} edit" \
"${CPROG} \[edit aborted\]: current directory (${TESTDIR}/2/first${PLUS}dir) contains an invalid character (${PLUS},>;=\\\\t\\\\n)"

	  # Make sure there are no droppings lying around
	  dotest devcom2-20 "cat ${CVSROOT_DIRNAME}/first-dir/CVS/fileattr" \
"Fw1	_watched=
Fw2	_watched=
Fw3	_watched=
Fnw1	_watched=
D	_watched="

	  dokeep
	  cd ../..
	  # Use -f because of the readonly files.
	  rm -rf 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	devcom3)
	  # More watch tests, most notably handling of features designed
	  # for future expansion.
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  mkdir 1
	  cd 1

	  # Set up logging via the postwatch script hook.  See the `info' test
	  # for a list of tests where other script hooks are tested.
	  dotest devcom3-init-1 "$testcvs -Q co CVSROOT"
	  cd CVSROOT
	  echo "ALL $TESTDIR/1/loggit %r %p %c" >>postwatch
	  dotest devcom3-init-2 "$testcvs -Q ci -mlog-watch"
	  cd .. # 1

	  cat >loggit <<EOF
#!$TESTSHELL
echo \${1+"\$@"} >>$TESTDIR/1/watch-log
EOF
	  # #^@&!^@ Cygwin.
	  if test -n "$remotehost"; then
	    $CVS_RSH $remotehost "chmod +x $TESTDIR/1/loggit"
	  else
	    chmod +x loggit
	  fi
	
	

	  dotest devcom3-1 "$testcvs -q co first-dir"
	  cd first-dir

	  touch w1 w2
	  dotest devcom3-2 "${testcvs} add w1 w2" "${DOTSTAR}"
	  dotest devcom3-3 "${testcvs} watch on w1 w2" ''
	  dotest devcom3-4 "${testcvs} -Q ci -m add-them"

	  # OK, since we are about to delve into CVS's internals, make
	  # sure that we seem to be correct about how they work.
	  dotest devcom3-5 "cat ${CVSROOT_DIRNAME}/first-dir/CVS/fileattr" \
"Fw1	_watched=
Fw2	_watched="
	  # Now write a few more lines, just as if we were a newer version
	  # of CVS implementing some new feature.
	  cat <<'EOF' >>${CVSROOT_DIRNAME}/first-dir/CVS/fileattr
Enew	line	here
G@#$^!@#=&
EOF
	  # Now get CVS to write to the fileattr file....
	  dotest devcom3-6 "${testcvs} watch off w1" ''
	  # ...and make sure that it hasn't clobbered our new lines.
	  # Note that writing these lines in another order would be OK
	  # too.
	  dotest devcom3-7 "cat ${CVSROOT_DIRNAME}/first-dir/CVS/fileattr" \
"Fw2	_watched=
G@#..!@#=&
Enew	line	here"

	  # See what CVS does when a file name is duplicated.  The
	  # behavior of all versions of CVS since file attributes were
	  # implemented is that it nukes the duplications.  This seems
	  # reasonable enough, although it means it isn't clear how
	  # useful duplicates would be for purposes of future
	  # expansion.  But in the interests of keeping behaviors
	  # predictable, might as well test for it, I guess.
	  echo 'Fw2	duplicate=' >>${CVSROOT_DIRNAME}/first-dir/CVS/fileattr
	  dotest devcom3-8 "${testcvs} watch on w1" ''
	  dotest devcom3-9 "cat ${CVSROOT_DIRNAME}/first-dir/CVS/fileattr" \
"Fw2	_watched=
Fw1	_watched=
Enew	line	here
G@#..!@#=&"

	  # Now test disconnected "cvs edit" and the format of the 
	  # CVS/Notify file.
	  if $remote; then
	    CVS_SERVER_save=$CVS_SERVER
	    CVS_SERVER=$TESTDIR/cvs-none; export CVS_SERVER

	    # The ${DOTSTAR} below matches the exact CVS server error message,
	    # which in :fork: mode is:
	    # "$SPROG \[edit aborted\]: cannot exec $TESTDIR/cvs-none: ${DOTSTAR}",
	    # but which is:
	    # "bash2: line 1: $TESTDIR/cvs-none: No such file or directory"
	    # when testing across an :ext:/ssh link to my Linux 2.4 box.
	    #
	    # I can't even test for the second part of the error message,
	    # from the client, which varies more consistently, usually either
	    # "end of file from server" (if the process doing the exec exits
	    # before the parent gets around to sending data to it) or
	    # "received broken pipe signal" (if it is the other way around),
	    # since HP-UX fails to output it.
	    dotest_fail devcom3-9ar "$testcvs edit w1 2>/dev/null"
	    dotest devcom3-9br "test -w w1"
	    dotest devcom3-9cr "cat CVS/Notify" \
"Ew1	[SMTWF][uoehra][neduit] [JFAMSOND][aepuco][nbrylgptvc] [0-9 ][0-9] [0-9:]* [0-9][0-9][0-9][0-9] -0000	[-a-zA-Z_.0-9]*	${TESTDIR}/1/first-dir	EUC"
	    CVS_SERVER=${CVS_SERVER_save}; export CVS_SERVER
	    if $proxy; then
	      dotest_fail devcom3-9dp "$testcvs -q update" \
"This CVS server does not support disconnected \`cvs edit'\.  For now, remove all \`CVS/Notify' files in your workspace and try your command again\."
	      dotest devcom3-9ep "test -f CVS/Notify"
	      rm CVS/Notify
	      dotest devcom3-9hp "$testcvs watchers w1"
	    else
	      dotest devcom3-9dr "$testcvs -q update"
	      dotest_fail devcom3-9er "test -f CVS/Notify"
	      dotest devcom3-9fr "$testcvs watchers w1" \
"w1	$username	tedit	tunedit	tcommit"
	    fi
	    dotest devcom3-9gr "$testcvs unedit w1"
	    dotest devcom3-9hr "$testcvs watchers w1"
	  fi

	  cd ../..
	  # OK, now change the tab to a space, and see that CVS gives
	  # a reasonable error (this is database corruption but CVS should
	  # not lose its mind).
	  sed -e 's/Fw2	/Fw2 /' <$CVSROOT_DIRNAME/first-dir/CVS/fileattr \
	    >$CVSROOT_DIRNAME/first-dir/CVS/fileattr.new
	  modify_repo mv $CVSROOT_DIRNAME/first-dir/CVS/fileattr.new \
			 $CVSROOT_DIRNAME/first-dir/CVS/fileattr
	  mkdir 2; cd 2
	  dotest_fail devcom3-10 "${testcvs} -Q co ." \
"${SPROG} \[checkout aborted\]: file attribute database corruption: tab missing in ${CVSROOT_DIRNAME}/first-dir/CVS/fileattr"

	  notifyworks=false
	  if $remote; then
	    if $proxy; then :; else
	      notifyworks=:
	    fi
	  fi
	  if $notifyworks; then
	    dotest devcom3-postwatch-examine-1r "cat $TESTDIR/1/watch-log" \
"$CVSROOT_DIRNAME first-dir watch
$CVSROOT_DIRNAME first-dir watch
$CVSROOT_DIRNAME first-dir watch
$CVSROOT_DIRNAME first-dir update
$CVSROOT_DIRNAME first-dir server"
	  else
	    dotest devcom3-postwatch-examine-1 "cat $TESTDIR/1/watch-log" \
"$CVSROOT_DIRNAME first-dir watch
$CVSROOT_DIRNAME first-dir watch
$CVSROOT_DIRNAME first-dir watch"
	  fi

	  dokeep
	  restore_adm
	  cd ..
	  # Use -f because of the readonly files.
	  rm -rf 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	watch4)
	  # More watch tests, including adding directories.
	  mkdir 1; cd 1
	  dotest watch4-0a "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest watch4-0b "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"

	  cd first-dir
	  dotest watch4-1 "${testcvs} watch on" ''
	  # This is just like the 173 test
	  touch file1
	  dotest watch4-2 "$testcvs add file1" \
"$SPROG add: scheduling file .file1. for addition
$SPROG add: use .$SPROG commit. to add this file permanently"
	  dotest watch4-3 "$testcvs -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  # Now test the analogous behavior for directories.
	  mkdir subdir
	  dotest watch4-4 "${testcvs} add subdir" \
"Directory ${CVSROOT_DIRNAME}/first-dir/subdir added to the repository"
	  cd subdir
	  touch sfile
	  dotest watch4-5 "${testcvs} add sfile" \
"${SPROG} add: scheduling file .sfile. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest watch4-6 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/subdir/sfile,v  <--  sfile
initial revision: 1\.1"
	  cd ../../..
	  mkdir 2; cd 2
	  dotest watch4-7 "${testcvs} -q co first-dir" "U first-dir/file1
U first-dir/subdir/sfile"
	  dotest_fail watch4-8 "test -w first-dir/file1" ''
	  dotest_fail watch4-9 "test -w first-dir/subdir/sfile" ''
	  cd first-dir
	  dotest watch4-10 "${testcvs} edit file1" ''
	  echo 'edited in 2' >file1
	  cd ../..

	  cd 1/first-dir

            # NOTE: I'm leaving in '' as acceptable
            #  to maintain partial compatibility with CVS versions
            #  prior to the edit check patch.
          editorsLineRE="file1	$username	[SMTWF][uoehra][neduit] [JFAMSOND][aepuco][nbrylgptvc] [0-9 ][0-9] [0-9:]* [0-9][0-9][0-9][0-9] -0000	$hostname	$TESTDIR/2/first-dir"
	  dotest watch4-11 "$testcvs edit file1" "$editorsLineRE"

	  echo 'edited in 1' >file1
	  dotest watch4-12 "${testcvs} -q ci -m edit-in-1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1"
	  cd ../..
	  cd 2/first-dir
	  dotest watch4-13 "${testcvs} -q update" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.1
retrieving revision 1\.2
Merging differences between 1\.1 and 1\.2 into file1
rcsmerge: warning: conflicts during merge
${SPROG} update: conflicts found in file1
C file1"
	  if (echo yes | ${testcvs} unedit file1) >>${LOGFILE}; then
	    pass watch4-14
	  else
	    fail watch4-15
	  fi
	  # This could plausibly be defined to either go back to the revision
	  # which was cvs edit'd (the status quo), or back to revision 1.2
	  # (that is, the merge could update CVS/Base/file1).  We pick the
	  # former because it is easier to implement, not because we have
	  # thought much about which is better.
	  dotest watch4-16 "cat file1" ''
	  # Make sure CVS really thinks we are at 1.1.
	  dotest watch4-17 "${testcvs} -q update" "U file1"
	  dotest watch4-18 "cat file1" "edited in 1"
	  cd ../..

	  # As a sanity check, make sure we are in the right place.
	  dotest watch4-cleanup-1 "test -d 1"
	  dotest watch4-cleanup-1 "test -d 2"

	  dokeep
	  # Specify -f because of the readonly files.
	  rm -rf 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	watch5)
	  # This test was designed to catch a problem in server
	  # mode where an 'cvs edit'd file disappeared from the
	  # CVS/Base directory when 'cvs status' or 'cvs update'
	  # was called on the file after the file was touched.
	  #
	  # This test is still here to prevent the bug from
	  # being reintroduced.
	  #
	  # The rationale for having CVS/Base stay around is that
	  # CVS/Base should be there if "cvs edit" has been run (this
	  # may be helpful as a "cvs editors" analogue, it is
	  # client-side and based on working directory not username;
	  # but more importantly, it isn't clear why a "cvs status"
	  # would act like an unedit, and even if it does, it would
	  # need to make the file read-only again).

	  mkdir watch5; cd watch5
	  dotest watch5-0a "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest watch5-0b "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"

	  cd first-dir
	  dotest watch5-1 "${testcvs} watch on" ''
	  # This is just like the 173 test
	  touch file1
	  dotest watch5-2 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest watch5-3 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  dotest watch5-4 "${testcvs} edit file1" ''
	  dotest watch5-5 "test -f CVS/Base/file1" ''
	  if ${testcvs} status file1 >>${LOGFILE} 2>&1; then
		pass watch5-6
	  else
		fail watch5-6
	  fi
	  dotest watch5-7 "test -f CVS/Base/file1" ''

	  # Here's where the file used to dissappear
	  touch file1
	  if ${testcvs} status file1 >>${LOGFILE} 2>&1; then
		pass watch5-8
	  else
		fail watch5-8
	  fi
	  dotest watch5-10 "test -f CVS/Base/file1" ''

	  # Make sure update won't remove the file either
	  touch file1
	  dotest watch5-11 "${testcvs} -q up" ''
	  dotest watch5-12 "test -f CVS/Base/file1" ''

	  dokeep
	  cd ../..
	  rm -r watch5
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	watch6-0)

	  # Make sure that default attributes are being set properly.
	  # Specifying a directory has, it seems, never worked,
	  # and 1.12.10 broke it completely.
	  mkdir watch6-0; cd watch6-0

	  dotest watch6-0-setup-1 "$testcvs -Q co -ldtop ."
	  cd top
	  mkdir watch6-0
	  dotest watch6-0-setup-2 "$testcvs -Q add watch6-0"
	  cd watch6-0
	  dotest watch6-0-1 "$testcvs watch add"
	  dotest watch6-0-2 "grep -qE '^D' $CVSROOT_DIRNAME/watch6-0/CVS/fileattr"
	  dotest watch6-0-3 "$testcvs watch remove"
	  dotest_fail watch6-0-4 "grep -qE '^D' $CVSROOT_DIRNAME/watch6-0/CVS/fileattr 2>/dev/null"

	  dotest watch6-0-5 "$testcvs watch add ."
	  dotest watch6-0-6 "grep -qE '^D' $CVSROOT_DIRNAME/watch6-0/CVS/fileattr"
	  dotest watch6-0-7 "$testcvs watch remove ."
	  dotest_fail watch6-0-8 "grep -qE '^D' $CVSROOT_DIRNAME/watch6-0/CVS/fileattr 2>/dev/null"

	  # OK, basic add/remove work. Now, make sure it works with named directories
	  mkdir dir1
	  mkdir dir2
	  mkdir dir3
	  echo afile>afile
	  $testcvs -Q add afile dir1 dir2 dir3
	  $testcvs -Q ci -m "Adding test files"

	  # Current directory should not be watched, but there should be a watch on the file,
	  # and on dir1 & dir2, but not on dir3.
	  dotest watch6-0-9 "$testcvs -Q watch add afile dir1 dir2"
	  dotest_fail watch6-0-10 "grep -qE '^D' $CVSROOT_DIRNAME/watch6-0/CVS/fileattr 2>/dev/null"
	  dotest watch6-0-11 "grep -qE '^Fafile' $CVSROOT_DIRNAME/watch6-0/CVS/fileattr"
	  dotest watch6-0-12 "grep -qE '^D' $CVSROOT_DIRNAME/watch6-0/dir1/CVS/fileattr"
	  dotest watch6-0-13 "grep -qE '^D' $CVSROOT_DIRNAME/watch6-0/dir2/CVS/fileattr"
	  dotest_fail watch6-0-12 "grep -qE '^D' $CVSROOT_DIRNAME/watch6-0/dir3/CVS/fileattr 2>/dev/null"

	  dokeep
	  cd ../../..
	  rm -rf watch6-0
	  modify_repo rm -rf $CVSROOT_DIRNAME/watch6-0
	  ;;



	watch6)
	  # Check that `cvs watch on' does not reset the fileattr file.
	  mkdir watch6; cd watch6

	  dotest watch6-setup-1 "$testcvs -Q co -ldtop ."
	  cd top
	  mkdir watch6
	  dotest watch6-setup-2 "$testcvs -Q add watch6"

	  # I don't recall why I had these next 3 lines.
	  cd ..
	  dotest watch6-setup-3 "$testcvs -Q co watch6"
	  cd watch6

	  mkdir subdir
	  dotest watch6-setup-4 "$testcvs -Q add subdir"
	  cd subdir

	  # START watch add/remove sequence
	  dotest watch6-1 "$testcvs -Q watch add"
	  dotest watch6-2 \
"grep '_watchers' $CVSROOT_DIRNAME/watch6/subdir/CVS/fileattr >/dev/null"

	  dotest watch6-3 "$testcvs watch on"
	  dotest watch6-4 \
"grep '_watchers' $CVSROOT_DIRNAME/watch6/subdir/CVS/fileattr >/dev/null"
	  dotest watch6-5 \
"grep '_watched' $CVSROOT_DIRNAME/watch6/subdir/CVS/fileattr >/dev/null"

	  dotest watch6-6 "$testcvs watch off"
	  dotest watch6-7 \
"grep '_watchers' $CVSROOT_DIRNAME/watch6/subdir/CVS/fileattr >/dev/null"
	  dotest_fail watch6-8 \
"grep '_watched' $CVSROOT_DIRNAME/watch6/subdir/CVS/fileattr >/dev/null"

	  dotest watch6-9 "$testcvs watch remove"
	  dotest_fail watch6-10 \
"test -d $CVSROOT_DIRNAME/test-directory/subdir/CVS"
	  dotest_fail watch6-11 \
"test -f $CVSROOT_DIRNAME/test-directory/subdir/CVS/fileattr"
	  # END watch add/remove sequence

	  echo Hi there >afile
	  dotest watch6-12 "$testcvs -Q add afile"
	  dotest watch6-13 "$testcvs ci -m 'A file' afile" \
"$CVSROOT_DIRNAME/watch6/subdir/afile,v  <--  afile
initial revision: 1.1"

	  # START watch add/remove sequence
	  dotest watch6-14 "$testcvs -Q watch add"
	  dotest watch6-15 \
"grep '_watchers' $CVSROOT_DIRNAME/watch6/subdir/CVS/fileattr >/dev/null"

	  dotest watch6-16 "$testcvs watch on"
	  dotest watch6-17 \
"grep '_watchers' $CVSROOT_DIRNAME/watch6/subdir/CVS/fileattr >/dev/null"
	  dotest watch6-18 \
"grep '_watched' $CVSROOT_DIRNAME/watch6/subdir/CVS/fileattr >/dev/null"

	  dotest watch6-19 "$testcvs watch off"
	  dotest watch6-20 \
"grep '_watchers' $CVSROOT_DIRNAME/watch6/subdir/CVS/fileattr >/dev/null"
	  dotest_fail watch6-21 \
"grep '_watched' $CVSROOT_DIRNAME/watch6/subdir/CVS/fileattr >/dev/null"

	  dotest watch6-22 "$testcvs watch remove"
	  dotest_fail watch6-23 \
"test -d $CVSROOT_DIRNAME/test-directory/subdir/CVS"
	  dotest_fail watch6-24 \
"test -f $CVSROOT_DIRNAME/test-directory/subdir/CVS/fileattr"
	  # END watch add/remove sequence

	  if $keep; then
	    echo Keeping $TESTDIR and exiting due to --keep
	    exit 0
	  fi
	  cd ../../..
	  rm -r watch6
	  modify_repo rm -rf $CVSROOT_DIRNAME/watch6
	  ;;



        edit-check)
          # This tests the edit -c/-f and related features.

	  mkdir edit-check; cd edit-check
	  dotest edit-check-0a "$testcvs -q co -l ."
	  mkdir first-dir
	  dotest edit-check-0b "$testcvs add first-dir" \
"Directory $CVSROOT_DIRNAME/first-dir added to the repository"

	  cd first-dir
	  dotest edit-check-1 "$testcvs watch on"

          echo foo > file1
          dotest edit-check-2a "$testcvs add -minitial file1" \
"$SPROG [a-z]*: scheduling file .file1. for addition
$SPROG [a-z]*: use .$SPROG commit. to add this file permanently"

          dotest edit-check-2b "$testcvs commit -m 'c1' file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"

          editorsLineRE="file1	$username	[SMTWF][uoehra][neduit] [JFAMSOND][aepuco][nbrylgptvc] [0-9 ][0-9] [0-9:]* [0-9][0-9][0-9][0-9] -0000	$hostname	$TESTDIR/edit-check/first-dir"

          R_editorsLineRE="first-dir/file1	$username	[SMTWF][uoehra][neduit] [JFAMSOND][aepuco][nbrylgptvc] [0-9 ][0-9] [0-9:]* [0-9][0-9][0-9][0-9] -0000	$hostname	$TESTDIR/edit-check"
          F3_editorsLineRE="second-dir/file3	$username	[SMTWF][uoehra][neduit] [JFAMSOND][aepuco][nbrylgptvc] [0-9 ][0-9] [0-9:]* [0-9][0-9][0-9][0-9] -0000	$hostname	$TESTDIR/edit-check/first-dir"

          A_editorsLineRE="file1	[-a-zA-Z0-9_]*	[SMTWF][uoehra][neduit] [JFAMSOND][aepuco][nbrylgptvc] [0-9 ][0-9] [0-9:]* [0-9][0-9][0-9][0-9] -0000	$hostname	$TESTDIR[0-9]*/edit-check/first-dir"

          AF_editorsLineRE="file[12]	[-a-zA-Z0-9_]*	[SMTWF][uoehra][neduit] [JFAMSOND][aepuco][nbrylgptvc] [0-9 ][0-9] [0-9:]* [0-9][0-9][0-9][0-9] -0000	$hostname	$TESTDIR/edit-check/first-dir"

          NF_editorsLineRE="	[-a-zA-Z0-9_]*	[SMTWF][uoehra][neduit] [JFAMSOND][aepuco][nbrylgptvc] [0-9 ][0-9] [0-9:]* [0-9][0-9][0-9][0-9] -0000	$hostname	$TESTDIR/edit-check/first-dir"

          dotest edit-check-3 "$testcvs edit file1"
          dotest edit-check-4 "$testcvs edit file1" "$editorsLineRE"

          dotest_fail edit-check-5a "$testcvs edit -c file1" \
"$editorsLineRE
$SPROG edit: Skipping file \`file1' due to existing editors\."

          dotest edit-check-5b "$testcvs editors" "$editorsLineRE"

          dotest edit-check-6a "$testcvs edit -c -f file1" "$editorsLineRE"
          dotest edit-check-6b "$testcvs editors" "$editorsLineRE"

          dotest edit-check-7a "cat file1" "foo"
          echo "bar" > file1
          dotest_fail edit-check-7b "$testcvs edit -c file1" \
"$editorsLineRE
$SPROG edit: Skipping file \`file1' due to existing editors\."
          dotest edit-check-7c "cat file1" "bar"

            # edit-check-8a has issues.  It copies the current (modified)
            # version of the file into CVS/Base, so that edit-check-9a and
            # edit-check-9b don't get the expected results.
            #   Maybe unedit is *supposed* to return it to the state
            # it was in before the edit (even if it was modified),
            # but while that has a certain symetry, it doesn't seem
            # to pass the intuitive-usability test.
            #   This aspect of the general problem could
            # be fixed by not overwriting pre-existing Base versions,
            # but it still wouldn't fix it if the user manually
            # modified the file before doing the first edit.
            #   Because of the possibility that this is working as
            # intended, I'm just commenting out the test, not fixing
            # the issue.
          #dotest edit-check-8a "${testcvs} edit -c -f file1" \
          #   "${editorsLineRE}"
          dotest edit-check-8b "$testcvs editors" "$editorsLineRE"

          dotest edit-check-9a "echo yes | $testcvs unedit file1" \
"file1 has been modified; revert changes? "
          dotest edit-check-9b "$testcvs editors"
          dotest edit-check-9c "cat file1" "foo"

          dotest edit-check-10 "$testcvs edit -c file1"
          dotest_fail edit-check-11 "$testcvs edit -c file1" \
"$editorsLineRE
$SPROG edit: Skipping file \`file1' due to existing editors\."

          echo "morefoo" > file1
          dotest edit-check-12a "$testcvs commit -m 'c2' -c file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1"
          dotest edit-check-12b "$testcvs editors file1"

          chmod u+w file1
          echo "morebar" > file1
          dotest_fail edit-check-13a "$testcvs commit -m 'c3' -c file1" \
"$SPROG [a-z]*: Valid edit does not exist for file1
$SPROG \[[a-z]* aborted\]: correct above errors first!"
          dotest edit-check-13b "$testcvs editors file1"

          dotest edit-check-14a "$testcvs commit -m 'c4' -c -f file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.3; previous revision: 1\.2"
          dotest edit-check-14b "$testcvs editors file1"

          dotest edit-check-15 "$testcvs edit -c file1"
          cd ..

          dotest edit-check-16a "echo yes | $testcvs release -d first-dir" \
"You have \[0\] altered files in this repository.
Are you sure you want to release (and delete) directory \`first-dir': "
          dotest edit-check-16b "$testcvs -q update -d first-dir" \
             "U first-dir/file1"
          cd first-dir
          dotest edit-check-16c "$testcvs editors file1"

          cd ..
          dotest edit-check-17a "$testcvs edit -c"
          dotest_fail edit-check-17b "$testcvs edit -c" \
"$R_editorsLineRE
$SPROG edit: Skipping file \`first-dir/file1' due to existing editors\."
          dotest edit-check-17c "$testcvs edit -c -f" "$R_editorsLineRE"

          echo "more changes" > first-dir/file1
          dotest edit-check-18a "$testcvs -q commit -m 'c5' -c" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  first-dir/file1
new revision: 1\.4; previous revision: 1\.3"
          dotest edit-check-18b "$testcvs editors"

          cd first-dir

            # Manually fake another editor:

            # Try to gaurantee a seperate name for an "other" user editting
            # the file.
          otherUser="dummyUser"
          if [ x"$USER" = x"$otherUser" ]  ; then
            otherUser="dummyUser2"
          fi
          if [ x"$LOGNAME" = x"$otherUser" ] ; then
            otherUser="dummyUser3"
          fi
          tabChar='	'

          backupFileattrName="$CVSROOT_DIRNAME/first-dir/CVS/bak.fileattr.$$"
          mv $CVSROOT_DIRNAME/first-dir/CVS/fileattr $backupFileattrName

          otherDir="`pwd | sed 's%/edit-check/%2/edit-check/%'`"
          echo \
"Ffile1${tabChar}_watched=;_editors=$otherUser>Sat Oct  6 04:25:00 2001 -0000+`hostname`+$otherDir;_watchers=$otherUser>tedit+tunedit+tcommit
D${tabChar}_watched=" > $CVSROOT_DIRNAME/first-dir/CVS/fileattr 

          editFileattrName="$CVSROOT_DIRNAME/first-dir/CVS/edit.fileattr.$$"
          cp $CVSROOT_DIRNAME/first-dir/CVS/fileattr $editFileattrName

          O_editorsLineRE="file1	$otherUser	[SMTWF][uoehra][neduit] [JFAMSOND][aepuco][nbrylgptvc] [0-9 ][0-9] [0-9:]* [0-9][0-9][0-9][0-9] -0000	$hostname	$TESTDIR[0-9]/edit-check/first-dir"

          dotest edit-check-19a "$testcvs edit file1" "$O_editorsLineRE"
          dotest edit-check-19b "$testcvs editors" \
"$A_editorsLineRE
$NF_editorsLineRE"

          dotest edit-check-20a "$testcvs unedit file1"
          dotest edit-check-20b "$testcvs editors" "$O_editorsLineRE"

          dotest_fail edit-check-21a "$testcvs edit -c file1" \
"$O_editorsLineRE
$SPROG edit: Skipping file \`file1' due to existing editors\."
          dotest edit-check-21b "$testcvs editors" "$O_editorsLineRE"

          dotest edit-check-22a "$testcvs edit -c -f file1" "$O_editorsLineRE"
          dotest edit-check-22b "$testcvs editors" \
"$A_editorsLineRE
$NF_editorsLineRE"

          echo "Yet another change" >file1

          dotest_fail edit-check-23a "$testcvs edit -c" \
"$A_editorsLineRE
$NF_editorsLineRE
$SPROG edit: Skipping file \`file1' due to existing editors\."

          dotest edit-check-23b "$testcvs editors" \
"$A_editorsLineRE
$NF_editorsLineRE"

          dotest edit-check-24a "echo y | $testcvs unedit" \
             "file1 has been modified; revert changes? "
          dotest edit-check-24b "$testcvs editors" "$O_editorsLineRE"
          dotest edit-check-24c "cat file1" "more changes"

          dotest edit-check-25a "$testcvs unedit"
          dotest edit-check-25b "$testcvs editors" "$O_editorsLineRE"
          dotest_fail edit-check-25c "test -w file1"

          dotest edit-check-26a "$testcvs edit file1" "$O_editorsLineRE"
          dotest edit-check-26b "$testcvs editors file1" \
"$A_editorsLineRE
$NF_editorsLineRE"
          dotest edit-check-26c "test -w file1"

          echo "Yet more changes" >file1
          dotest edit-check-27a "$testcvs -q commit -mmsg -c file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.5; previous revision: 1\.4"
          dotest edit-check-27b "$testcvs editors" "$O_editorsLineRE"

          chmod u+w file1
          echo "unofficial change" >file1

          dotest_fail edit-check-28a "$testcvs -q commit -mmsg -c" \
"$SPROG commit: Valid edit does not exist for file1
$SPROG \[commit aborted\]: correct above errors first!"
          dotest edit-check-28b "$testcvs editors" "$O_editorsLineRE"

          dotest edit-check-29a "$testcvs -q commit -mmsg -c -f" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.6; previous revision: 1\.5"
          dotest edit-check-29b "$testcvs editors" "$O_editorsLineRE"
          dotest edit-check-29c "cat file1" "unofficial change"

          modify_repo cp "$backupFileattrName" \
			 $CVSROOT_DIRNAME/first-dir/CVS/fileattr
          dotest edit-check-30 "$testcvs editors"

          # Make sure earlier unreported editors are reported properly
          # with the edit-check code running.
          if $remote; then
            CVS_SERVER_SAVED=$CVS_SERVER
            CVS_SERVER=$TESTDIR/cvs-none; export CVS_SERVER

            # The $DOTSTAR matches the exact exec error message
            # (which varies) and either "end of file from server"
            # (if the process doing the exec exits before the parent
            # gets around to sending data to it) or "broken pipe" (if it
            # is the other way around).
            dotest_fail edit-check-31ar "$testcvs edit file1" \
"$SPROG \[edit aborted\]: cannot exec $TESTDIR/cvs-none: $DOTSTAR"
            dotest edit-check-31br "test -w file1"
            dotest edit-check-31cr "cat CVS/Notify" \
"Efile1	[SMTWF][uoehra][neduit] [JFAMSOND][aepuco][nbrylgptvc] [0-9 ][0-9] [0-9:]* [0-9][0-9][0-9][0-9] -0000	[-a-zA-Z_.0-9]*	$TESTDIR/edit-check/first-dir	EUC"
            CVS_SERVER=$CVS_SERVER_SAVED; export CVS_SERVER

            dotest_fail edit-check-31dr "$testcvs edit -c file1" \
"$editorsLineRE
$SPROG edit: Skipping file \`file1' due to existing editors\."
            dotest edit-check-31er "$testcvs editors file1" "$editorsLineRE"
            dotest edit-check-31fr "$testcvs unedit file1"
          fi

           # Make sure it isn't confused by handling multiple files at
           # the same time:
          echo file2Data >file2

          dotest edit-check-32a "$testcvs add file2" \
"$SPROG [a-z]*: scheduling file .file2. for addition
$SPROG [a-z]*: use .$SPROG commit. to add this file permanently"

          dotest edit-check-32b "$testcvs commit -m 'c1' file2" \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.1"

          mkdir second-dir
          dotest edit-check-32c "$testcvs add second-dir" \
"Directory $CVSROOT_DIRNAME/first-dir/second-dir added to the repository"
          cd second-dir
          echo ThirdFile >file3

          dotest edit-check-32d "$testcvs add file3" \
"$SPROG [a-z]*: scheduling file .file3. for addition
$SPROG [a-z]*: use .$SPROG commit. to add this file permanently"

          dotest edit-check-32f "$testcvs commit -m 'c1' file3" \
"$CVSROOT_DIRNAME/first-dir/second-dir/file3,v  <--  file3
initial revision: 1\.1"
          dotest_fail edit-check-32g "test -w file3"

          cd ..

          dotest edit-check-33a "$testcvs edit -c"

          dotest edit-check-33b "$testcvs editors" \
"$AF_editorsLineRE
$AF_editorsLineRE
$F3_editorsLineRE"
          dotest edit-check-33c "test -w second-dir/file3"

          dotest_fail edit-check-34a "$testcvs edit -c file1 file2" \
"$AF_editorsLineRE
$SPROG edit: Skipping file \`file1' due to existing editors\.
$AF_editorsLineRE
$SPROG edit: Skipping file \`file2' due to existing editors\."

          dotest edit-check-34b "$testcvs editors file1 file2" \
"$editorsLineRE
$AF_editorsLineRE"

          dotest edit-check-35a "$testcvs unedit file1"
          dotest edit-check-35b "$testcvs editors" \
"$AF_editorsLineRE
$F3_editorsLineRE"
          dotest edit-check-35c "test -w second-dir/file3"

          dotest edit-check-36a "$testcvs unedit"
          dotest edit-check-36b "$testcvs editors"
          dotest_fail edit-check-36c "test -w second-dir/file3"

	  dokeep
          cd ../..
          rm -rf edit-check
          rm -rf $CVSROOT_DIRNAME/first-dir
          ;;



	unedit-without-baserev)
	  mkdir 1; cd 1
	  module=x

	  file=m
	  echo foo > $file
	  dotest unedit-without-baserev-1 \
	    "$testcvs -Q import -m . $module X Y" ''
	  dotest unedit-without-baserev-2 "$testcvs -Q co $module" ''
	  cd $module

	  dotest unedit-without-baserev-3 "$testcvs -Q edit $file" ''

	  echo add a line >> $file
	  rm -f CVS/Baserev

	  # This will fail on most systems.
	  dotest unedit-without-baserev-4 "echo yes |${testcvs} -Q unedit $file" \
"m has been modified; revert changes${QUESTION} ${CPROG} unedit: m not mentioned in CVS/Baserev
${CPROG} unedit: run update to complete the unedit"

	  # SunOS4.1.4 systems make it this far, but with a corrupted
	  # CVS/Entries file.  Demonstrate the corruption!
	  dotest unedit-without-baserev-5 "cat CVS/Entries" \
	    "/$file/1\.1\.1\.1/${DOTSTAR}"

	  dotest unedit-without-baserev-6 "${testcvs} -q update" \
"$SPROG update: warning: \`m' was lost
U m"

	  # OK, those were the easy cases.  Now tackle the hard one
	  # (the reason that CVS/Baserev was invented rather than just
	  # getting the revision from CVS/Entries).  This is very
	  # similar to watch4-10 through watch4-18 but with Baserev
	  # missing.
	  cd ../..
	  mkdir 2; cd 2
	  dotest unedit-without-baserev-7 "${testcvs} -Q co x" ''
	  cd x

	  dotest unedit-without-baserev-10 "${testcvs} edit m" ''
	  echo 'edited in 2' >m
	  cd ../..

	  cd 1/x

          editorsLineRE="m	$username	[SMTWF][uoehra][neduit] [JFAMSOND][aepuco][nbrylgptvc] [0-9 ][0-9] [0-9:]* [0-9][0-9][0-9][0-9] -0000	$hostname	$TESTDIR/2/x"
	  dotest unedit-without-baserev-11 "$testcvs edit m" "$editorsLineRE"

	  echo 'edited in 1' >m
	  dotest unedit-without-baserev-12 "${testcvs} -q ci -m edit-in-1" \
"$CVSROOT_DIRNAME/x/m,v  <--  m
new revision: 1\.2; previous revision: 1\.1"
	  cd ../..
	  cd 2/x
	  dotest unedit-without-baserev-13 "${testcvs} -q update" \
"RCS file: ${CVSROOT_DIRNAME}/x/m,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.2
Merging differences between 1\.1\.1\.1 and 1\.2 into m
rcsmerge: warning: conflicts during merge
${SPROG} update: conflicts found in m
C m"
	  rm CVS/Baserev
	  dotest unedit-without-baserev-14 "echo yes |${testcvs} unedit m" \
"m has been modified; revert changes${QUESTION} ${CPROG} unedit: m not mentioned in CVS/Baserev
${CPROG} unedit: run update to complete the unedit"
	  dotest unedit-without-baserev-15 "${testcvs} -q update" \
"$SPROG update: warning: \`m' was lost
U m"
	  # The following tests are kind of degenerate compared with
	  # watch4-16 through watch4-18 but might as well make sure that
	  # nothing seriously wrong has happened to the working directory.
	  dotest unedit-without-baserev-16 "cat m" 'edited in 1'
	  # Make sure CVS really thinks we are at 1.2.
	  dotest unedit-without-baserev-17 "${testcvs} -q update" ""
	  dotest unedit-without-baserev-18 "cat m" "edited in 1"

	  dokeep
	  cd ../..
	  rm -rf 1
	  rm -r 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/$module
	  ;;



	ignore)
	  # On Windows, we can't check out CVSROOT, because the case
	  # insensitivity means that this conflicts with cvsroot.
	  mkdir ignore
	  cd ignore

	  dotest ignore-1 "${testcvs} -q co CVSROOT" "U CVSROOT/${DOTSTAR}"
	  cd CVSROOT
	  echo rootig.c >cvsignore
	  dotest ignore-2 "${testcvs} add cvsignore" "${SPROG}"' add: scheduling file `cvsignore'"'"' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'

	  dotest ignore-3 " ${testcvs} ci -m added" \
"${CPROG} commit: Examining \.
${CVSROOT_DIRNAME}/CVSROOT/cvsignore,v  <--  cvsignore
initial revision: 1\.1
${SPROG} commit: Rebuilding administrative file database"

	  cd ..
	  if echo "yes" | ${testcvs} release -d CVSROOT >>${LOGFILE} ; then
	      pass ignore-4
	  else
	      fail ignore-4
	  fi

	  # CVS looks at the home dir from getpwuid, not HOME (is that correct
	  # behavior?), so this is hard to test and we won't try.
	  # echo foobar.c >${HOME}/.cvsignore
	  CVSIGNORE=envig.c; export CVSIGNORE
	  mkdir dir-to-import
	  cd dir-to-import
	  touch foobar.c bar.c rootig.c defig.o envig.c optig.c
	  # We use sort because we can't predict the order in which
	  # the files will be listed.
	  dotest_sort ignore-5 "${testcvs} import -m m -I optig.c ignore/first-dir tag1 tag2" \
'

I ignore/first-dir/defig.o
I ignore/first-dir/envig.c
I ignore/first-dir/optig.c
I ignore/first-dir/rootig.c
N ignore/first-dir/bar.c
N ignore/first-dir/foobar.c
No conflicts created by this import'
	  dotest_sort ignore-6 "${testcvs} import -m m -I ! ignore/second-dir tag3 tag4" \
'

N ignore/second-dir/bar.c
N ignore/second-dir/defig.o
N ignore/second-dir/envig.c
N ignore/second-dir/foobar.c
N ignore/second-dir/optig.c
N ignore/second-dir/rootig.c
No conflicts created by this import'
	  cd ..
	  rm -r dir-to-import

	  mkdir 1
	  cd 1
	  dotest ignore-7 "${testcvs} -q co -dsecond-dir ignore/second-dir" \
'U second-dir/bar.c
U second-dir/defig.o
U second-dir/envig.c
U second-dir/foobar.c
U second-dir/optig.c
U second-dir/rootig.c'
	  dotest ignore-8 "${testcvs} -q co -dfirst-dir ignore/first-dir" 'U first-dir/bar.c
U first-dir/foobar.c'
	  cd first-dir
	  touch rootig.c defig.o envig.c optig.c notig.c
	  dotest ignore-9 "${testcvs} -q update -I optig.c" "${QUESTION} notig.c"
	  # The fact that CVS requires us to specify -I CVS here strikes me
	  # as a bug.
	  dotest_sort ignore-10 "${testcvs} -q update -I ! -I CVS" \
"${QUESTION} defig.o
${QUESTION} envig.c
${QUESTION} notig.c
${QUESTION} optig.c
${QUESTION} rootig.c"

	  # Now test that commands other than update also print "? notig.c"
	  # where appropriate.  Only test this for remote, because local
	  # CVS only prints it on update.
	  rm optig.c
	  if $remote; then
	    dotest ignore-11r "$testcvs -q diff" "$QUESTION notig.c"

	    # Force the server to be contacted.  Ugh.  Having CVS
	    # contact the server for the sole purpose of checking
	    # the CVSROOT/cvsignore file does not seem like such a
	    # good idea, so I imagine this will continue to be
	    # necessary.  Oh well, at least we test CVS's ablity to
	    # handle a file with a modified timestamp but unmodified
	    # contents.
	    touch bar.c

	    dotest ignore-11ar "$testcvs -q ci -m commit-it" \
"$QUESTION notig.c"
	  fi

	  # now test .cvsignore files
	  cd ..
	  echo notig.c >first-dir/.cvsignore
	  echo foobar.c >second-dir/.cvsignore
	  touch first-dir/notig.c second-dir/notig.c second-dir/foobar.c
	  dotest_sort ignore-12 "${testcvs} -qn update" \
"${QUESTION} first-dir/.cvsignore
${QUESTION} second-dir/.cvsignore
${QUESTION} second-dir/notig.c"
	  dotest_sort ignore-13 "${testcvs} -qn update -I! -I CVS" \
"${QUESTION} first-dir/.cvsignore
${QUESTION} first-dir/defig.o
${QUESTION} first-dir/envig.c
${QUESTION} first-dir/rootig.c
${QUESTION} second-dir/.cvsignore
${QUESTION} second-dir/notig.c"

	  echo yes | dotest ignore-14 "${testcvs} release -d first-dir" \
"${QUESTION} \.cvsignore
You have \[0\] altered files in this repository.
Are you sure you want to release (and delete) directory .first-dir': "

	  echo add a line >>second-dir/foobar.c
	  rm second-dir/notig.c second-dir/.cvsignore
	  echo yes | dotest ignore-15 "${testcvs} release -d second-dir" \
"M foobar.c
You have \[1\] altered files in this repository.
Are you sure you want to release (and delete) directory .second-dir': "

	  dokeep
	  cd ../..
	  rm -r ignore
	  modify_repo rm -rf $CVSROOT_DIRNAME/ignore
	  ;;



	ignore-on-branch)
	  # Test that CVS _doesn't_ ignore files on branches because they were
	  # added to the trunk.
	  mkdir ignore-on-branch; cd ignore-on-branch
	  modify_repo mkdir $CVSROOT_DIRNAME/ignore-on-branch

	  # create file1 & file2 on trunk
	  dotest ignore-on-branch-setup-1 "$testcvs -q co -dsetup ignore-on-branch" ''
	  cd setup
	  echo file1 >file1 
	  dotest ignore-on-branch-setup-2 "$testcvs -q add file1" \
"${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest ignore-on-branch-setup-3 "$testcvs -q ci -mfile1 file1" \
"$CVSROOT_DIRNAME/ignore-on-branch/file1,v  <--  file1
initial revision: 1\.1"
	  dotest ignore-on-branch-setup-4 "$testcvs -q tag -b branch" 'T file1'
	  echo file2 >file2 
	  dotest ignore-on-branch-setup-5 "$testcvs -q add file2" \
"${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest ignore-on-branch-setup-6 "$testcvs -q ci -mtrunk file2" \
"$CVSROOT_DIRNAME/ignore-on-branch/file2,v  <--  file2
initial revision: 1\.1"

	  cd ..

	  # Check out branch.
	  #
	  # - This was the original failure case - file2 would not be flagged
	  #   with a '?'
	  dotest ignore-on-branch-1 "$testcvs -q co -rbranch ignore-on-branch" \
'U ignore-on-branch/file1'
	  cd ignore-on-branch
	  echo file2 on branch >file2 
	  dotest ignore-on-branch-2 "$testcvs -nq update" '? file2'

	  # Now set up for a join.  One of the original fixes for this would
	  # print out a 'U' and a '?' during a join which added a file.
	  if $remote; then
	    dotest ignore-on-branch-3 "$testcvs -q tag -b branch2" \
'? file2
T file1'
	  else
	    dotest ignore-on-branch-3 "$testcvs -q tag -b branch2" 'T file1'
	  fi
	  dotest ignore-on-branch-4 "$testcvs -q add file2" \
"${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest ignore-on-branch-5 "$testcvs -q ci -mbranch file2" \
"$CVSROOT_DIRNAME/ignore-on-branch/file2,v  <--  file2
new revision: 1\.1\.2\.2; previous revision: 1\.1\.2\.1"
	  dotest ignore-on-branch-6 "$testcvs -q up -rbranch2" \
"${SPROG} update: \`file2' is no longer in the repository"
	  dotest ignore-on-branch-7 "$testcvs -q up -jbranch" 'U file2'

	  dokeep
	  cd ../..
	  rm -r ignore-on-branch
	  modify_repo rm -rf $CVSROOT_DIRNAME/ignore-on-branch
	  ;;



	binfiles)
	  # Test cvs's ability to handle binary files.
	  # List of binary file tests:
	  #   * conflicts, "cvs admin": binfiles
	  #   * branching and joining: binfiles2
	  #   * adding and removing files: binfiles3
	  #   * -k wrappers: binwrap, binwrap2, binwrap3
	  #   * "cvs import" and wrappers: binwrap, binwrap2, binwrap3
	  #   * -k option to "cvs import": none yet, as far as I know.
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  mkdir 1; cd 1
	  dotest binfiles-1 "${testcvs} -q co first-dir" ''
	  ${AWK} 'BEGIN { printf "%c%c%c@%c%c", 2, 10, 137, 13, 10 }' \
	    </dev/null | ${TR} '@' '\000' >binfile.dat
	  cat binfile.dat binfile.dat >binfile2.dat
	  cd first-dir
	  cp ../binfile.dat binfile
	  dotest binfiles-2 "${testcvs} add -kb binfile" \
"${SPROG}"' add: scheduling file `binfile'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  dotest binfiles-3 "${testcvs} -q ci -m add-it" \
"$CVSROOT_DIRNAME/first-dir/binfile,v  <--  binfile
initial revision: 1\.1"
	  cd ../..
	  mkdir 2; cd 2
	  dotest binfiles-4 "${testcvs} -q co first-dir" 'U first-dir/binfile'
	  cd first-dir
	  dotest binfiles-5 "cmp ../../1/binfile.dat binfile" ''
	  # Testing that sticky options is -kb is the closest thing we have
	  # to testing that binary files work right on non-unix machines
	  # (until there is automated testing for such machines, of course).
	  dotest binfiles-5.5 "${testcvs} status binfile" \
"===================================================================
File: binfile          	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/binfile,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	-kb"

	  # Test that "-kk" does not override "-kb"
	  cd ../..
	  mkdir 2a; cd 2a
	  dotest binfiles-4 "${testcvs} -q co -kk first-dir" 'U first-dir/binfile'
	  cd first-dir
	  # Testing that sticky options is -kb is the closest thing we have
	  # to testing that binary files work right on non-unix machines
	  # (until there is automated testing for such machines, of course).
	  dotest binfiles-5.5 "${testcvs} status binfile" \
"===================================================================
File: binfile          	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/binfile,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	-kb"

	  # Test whether the default options from the RCS file are
	  # also used when operating on files instead of whole
	  # directories
          cd ../..
	  rm -r 2a
	  mkdir 3; cd 3
	  dotest binfiles-5.5b0 "${testcvs} -q co first-dir/binfile" \
'U first-dir/binfile'
	  cd first-dir
	  dotest binfiles-5.5b1 "${testcvs} status binfile" \
"===================================================================
File: binfile          	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/binfile,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	-kb"
	  cd ../..
	  rm -r 3
	  # test that "-kk" does not override "-kb"
	  mkdir 3; cd 3
	  dotest binfiles-5.5b0 "${testcvs} -q co -kk first-dir/binfile" \
'U first-dir/binfile'
	  cd first-dir
	  dotest binfiles-5.5b1 "${testcvs} status binfile" \
"===================================================================
File: binfile          	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/binfile,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	-kb"
	  cd ../..
	  rm -r 3
	  cd 2/first-dir

	  cp ../../1/binfile2.dat binfile
	  dotest binfiles-6 "${testcvs} -q ci -m modify-it" \
"$CVSROOT_DIRNAME/first-dir/binfile,v  <--  binfile
new revision: 1\.2; previous revision: 1\.1"
	  cd ../../1/first-dir
	  dotest binfiles-7 "${testcvs} -q update" '[UP] binfile'
	  dotest binfiles-8 "cmp ../binfile2.dat binfile" ''

	  # Now test handling of conflicts with binary files.
	  cp ../binfile.dat binfile
	  dotest binfiles-con0 "${testcvs} -q ci -m modify-it" \
"$CVSROOT_DIRNAME/first-dir/binfile,v  <--  binfile
new revision: 1\.3; previous revision: 1\.2"
	  cd ../../2/first-dir
	  echo 'edits in dir 2' >binfile
	  dotest binfiles-con1 "${testcvs} -q update" \
"$SPROG update: nonmergeable file needs merge
$SPROG update: revision 1\.3 from repository is now in binfile
$SPROG update: file from working directory is now in \.#binfile\.1\.2
C binfile"

	  dotest_fail binfiles-con1b "$testcvs -q up" "C binfile"

	  dotest binfiles-con2 "cmp binfile ../../1/binfile.dat" ''
	  dotest binfiles-con3 "cat .#binfile.1.2" 'edits in dir 2'

	  cp ../../1/binfile2.dat binfile
	  dotest binfiles-con4 "$testcvs -q ci -m resolve-it" \
"$CVSROOT_DIRNAME/first-dir/binfile,v  <--  binfile
new revision: 1\.4; previous revision: 1\.3"
	  cd ../../1/first-dir
	  dotest binfiles-con5 "${testcvs} -q update" '[UP] binfile'

	  dotest binfiles-9 "${testcvs} -q update -A" ''
	  # "-kk" no longer does anything with "-kb"
	  dotest binfiles-10 "${testcvs} -q update -kk" ''
	  dotest binfiles-11 "${testcvs} -q update" ''
	  # "-kk" no longer does anything with "-kb"
	  dotest binfiles-12 "${testcvs} -q update -A" ''
	  dotest binfiles-13 "${testcvs} -q update -A" ''

	  cd ../..

	  mkdir 3
	  cd 3
	  dotest binfiles-13a0 "${testcvs} -q co -r HEAD first-dir" \
'U first-dir/binfile'
	  cd first-dir
	  dotest binfiles-13a1 "${testcvs} status binfile" \
"===================================================================
File: binfile          	Status: Up-to-date

   Working revision:	1\.4.*
   Repository revision:	1\.4	${CVSROOT_DIRNAME}/first-dir/binfile,v
   Commit Identifier:	${commitid}
   Sticky Tag:		HEAD (revision: 1\.4)
   Sticky Date:		(none)
   Sticky Options:	-kb"
	  cd ../..
	  rm -r 3

	  cd 2/first-dir
	  echo 'this file is $''RCSfile$' >binfile
	  dotest binfiles-14a "${testcvs} -q ci -m modify-it" \
"$CVSROOT_DIRNAME/first-dir/binfile,v  <--  binfile
new revision: 1\.5; previous revision: 1\.4"
	  dotest binfiles-14b "cat binfile" 'this file is $''RCSfile$'
	  # See binfiles-5.5 for discussion of -kb.
	  dotest binfiles-14c "${testcvs} status binfile" \
"===================================================================
File: binfile          	Status: Up-to-date

   Working revision:	1\.5.*
   Repository revision:	1\.5	${CVSROOT_DIRNAME}/first-dir/binfile,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	-kb"
	  dotest binfiles-14d "${testcvs} admin -kv binfile" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/binfile,v
done"
	  # cvs admin doesn't change the checked-out file or its sticky
	  # kopts.  There probably should be a way which does (but
	  # what if the file is modified?  And do we try to version
	  # control the kopt setting?)
	  dotest binfiles-14e "cat binfile" 'this file is $''RCSfile$'
	  dotest binfiles-14f "${testcvs} status binfile" \
"===================================================================
File: binfile          	Status: Up-to-date

   Working revision:	1\.5.*
   Repository revision:	1\.5	${CVSROOT_DIRNAME}/first-dir/binfile,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	-kb"
	  dotest binfiles-14g "${testcvs} -q update -A" '[UP] binfile'
	  dotest binfiles-14h "cat binfile" 'this file is binfile,v'
	  dotest binfiles-14i "${testcvs} status binfile" \
"===================================================================
File: binfile          	Status: Up-to-date

   Working revision:	1\.5.*
   Repository revision:	1\.5	${CVSROOT_DIRNAME}/first-dir/binfile,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	-kv"

	  # Do sticky options work when used with 'cvs update'?
	  echo "Not a binary file." > nibfile
	  dotest binfiles-sticky1 "${testcvs} -q add nibfile" \
"${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest binfiles-sticky2 "${testcvs} -q ci -m add-it nibfile" \
"$CVSROOT_DIRNAME/first-dir/nibfile,v  <--  nibfile
initial revision: 1\.1"
	  dotest binfiles-sticky3 "${testcvs} -q update -kb nibfile" \
	    '[UP] nibfile'
	  dotest binfiles-sticky4 "${testcvs} -q status nibfile" \
"===================================================================
File: nibfile          	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/nibfile,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	-kb"

	  # Now test that -A can clear the sticky option.
	  dotest binfiles-sticky5 "${testcvs} -q update -A nibfile" \
"[UP] nibfile"
	  dotest binfiles-sticky6 "${testcvs} -q status nibfile" \
"===================================================================
File: nibfile          	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/nibfile,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest binfiles-15 "${testcvs} -q admin -kb nibfile" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/nibfile,v
done"
	  dotest binfiles-16 "${testcvs} -q update nibfile" "[UP] nibfile"
	  dotest binfiles-17 "${testcvs} -q status nibfile" \
"===================================================================
File: nibfile          	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/nibfile,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	-kb"

	  dotest binfiles-o1 "${testcvs} admin -o1.3:: binfile" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/binfile,v
deleting revision 1\.5
deleting revision 1\.4
done"
	  dotest binfiles-o2 "${testcvs} admin -o::1.3 binfile" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/binfile,v
deleting revision 1\.2
deleting revision 1\.1
done"
	  dotest binfiles-o3 "${testcvs} -q log -h -N binfile" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/binfile,v
Working file: binfile
head: 1\.3
branch:
locks: strict
access list:
keyword substitution: v
total revisions: 1
============================================================================="

	  # Check that the contents were right.  This isn't the hard case
	  # (in which RCS_delete_revs does a diff), but might as well.
	  dotest binfiles-o4 "${testcvs} -q update binfile" "U binfile"
	  dotest binfiles-o5 "cmp binfile ../../1/binfile.dat" ""

	  dokeep
	  cd ../..
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  rm -r 1 2
	  ;;



	binfiles2)
	  # Test cvs's ability to handle binary files, particularly branching
	  # and joining.  The key thing we are worrying about is that CVS
	  # doesn't print "cannot merge binary files" or some such, in 
	  # situations where no merging is required.
	  # See also "join" which does this with non-binary files.
	  #
	  # Cases (we are merging from the branch to the trunk):
	  # binfile.dat) File added on branch, not on trunk.
	  #      File should be marked for addition.
	  # brmod) File modified on branch, not on trunk.
	  #      File should be copied over to trunk (no merging is needed).
	  # brmod-trmod) File modified on branch, also on trunk.
	  #      This is a conflict.  Present the user with both files and
	  #      let them figure it out.
	  # brmod-wdmod) File modified on branch, not modified in the trunk
	  #      repository, but modified in the (trunk) working directory.
	  #      This is also a conflict.

	  modify_repo mkdir ${CVSROOT_DIRNAME}/first-dir
	  mkdir 1; cd 1
	  dotest binfiles2-1 "${testcvs} -q co first-dir" ''
	  cd first-dir

	  # The most important thing here is that binfile, binfile2, &c
	  # each be distinct from each other.  We also make sure to include
	  # a few likely end-of-line patterns to make sure nothing is
	  # being munged as if in text mode.
	  ${AWK} 'BEGIN { printf "%c%c%c@%c%c", 2, 10, 137, 13, 10 }' \
	    </dev/null | ${TR} '@' '\000' >../binfile
	  # Use binfl2 rather than binfile2 because of a problem with Cygwin
	  # and Samba. that causes cat to report that the input and output file
	  # are the same when outputting to binfile3.  Why?  I don't know, but
	  # it is consistently reproducible.
	  cat ../binfile ../binfile >../binfl2
	  cat ../binfl2 ../binfile >../binfile3

	  # FIXCVS: unless a branch has at least one file on it,
	  # tag_check_valid won't know it exists.  So if brmod didn't
	  # exist, we would have to invent it.
	  cp ../binfile brmod
	  cp ../binfile brmod-trmod
	  cp ../binfile brmod-wdmod
	  dotest binfiles2-1a \
"${testcvs} add -kb brmod brmod-trmod brmod-wdmod" \
"${SPROG} add: scheduling file .brmod. for addition
${SPROG} add: scheduling file .brmod-trmod. for addition
${SPROG} add: scheduling file .brmod-wdmod. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  dotest binfiles2-1b "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/brmod,v  <--  brmod
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/brmod-trmod,v  <--  brmod-trmod
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/brmod-wdmod,v  <--  brmod-wdmod
initial revision: 1\.1"
	  dotest binfiles2-2 "${testcvs} -q tag -b br" 'T brmod
T brmod-trmod
T brmod-wdmod'
	  dotest binfiles2-3 "${testcvs} -q update -r br" ''
	  cp ../binfile binfile.dat
	  dotest binfiles2-4 "${testcvs} add -kb binfile.dat" \
"${SPROG} add: scheduling file .binfile\.dat. for addition on branch .br.
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  cp ../binfl2 brmod
	  cp ../binfl2 brmod-trmod
	  cp ../binfl2 brmod-wdmod
	  dotest binfiles2-5 "${testcvs} -q ci -m br-changes" \
"$CVSROOT_DIRNAME/first-dir/Attic/binfile\.dat,v  <--  binfile\.dat
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/brmod,v  <--  brmod
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/brmod-trmod,v  <--  brmod-trmod
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/brmod-wdmod,v  <--  brmod-wdmod
new revision: 1\.1\.2\.1; previous revision: 1\.1"
	  dotest binfiles2-6 "${testcvs} -q update -A" \
"${SPROG} update: \`binfile\.dat' is no longer in the repository
[UP] brmod
[UP] brmod-trmod
[UP] brmod-wdmod"
	  dotest_fail binfiles2-7 "test -f binfile.dat" ''
	  dotest binfiles2-7-brmod "cmp ../binfile brmod"
	  cp ../binfile3 brmod-trmod
	  dotest binfiles2-7a "${testcvs} -q ci -m tr-modify" \
"$CVSROOT_DIRNAME/first-dir/brmod-trmod,v  <--  brmod-trmod
new revision: 1\.2; previous revision: 1\.1"
	  cp ../binfile3 brmod-wdmod

	  dotest binfiles2-8 "${testcvs} -q update -j br" \
"U binfile\.dat
U brmod
${SPROG} update: nonmergeable file needs merge
${SPROG} update: revision 1.1.2.1 from repository is now in brmod-trmod
${SPROG} update: file from working directory is now in .#brmod-trmod.1.2
C brmod-trmod
M brmod-wdmod
${SPROG} update: nonmergeable file needs merge
${SPROG} update: revision 1.1.2.1 from repository is now in brmod-wdmod
${SPROG} update: file from working directory is now in .#brmod-wdmod.1.1
C brmod-wdmod"

	  dotest binfiles2-9 "cmp ../binfile binfile.dat"
	  dotest binfiles2-9-brmod "cmp ../binfl2 brmod"
	  dotest binfiles2-9-brmod-trmod "cmp ../binfl2 brmod-trmod"
	  dotest binfiles2-9-brmod-trmod "cmp ../binfl2 brmod-wdmod"
	  dotest binfiles2-9a-brmod-trmod "cmp ../binfile3 .#brmod-trmod.1.2"
	  dotest binfiles2-9a-brmod-wdmod "cmp ../binfile3 .#brmod-wdmod.1.1"

	  # Test that everything was properly scheduled.
	  dotest binfiles2-10 "${testcvs} -q ci -m checkin" \
"$CVSROOT_DIRNAME/first-dir/binfile\.dat,v  <--  binfile\.dat
new revision: 1\.2; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/brmod,v  <--  brmod
new revision: 1\.2; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/brmod-trmod,v  <--  brmod-trmod
new revision: 1\.3; previous revision: 1\.2
$CVSROOT_DIRNAME/first-dir/brmod-wdmod,v  <--  brmod-wdmod
new revision: 1\.2; previous revision: 1\.1"

	  dotest_fail binfiles2-o1 "${testcvs} -q admin -o :1.2 brmod-trmod" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/brmod-trmod,v
deleting revision 1\.2
${SPROG} admin: ${CVSROOT_DIRNAME}/first-dir/brmod-trmod,v: can't remove branch point 1\.1
${SPROG} admin: RCS file for .brmod-trmod. not modified\."
	  dotest binfiles2-o2 "${testcvs} -q admin -o 1.1.2.1: brmod-trmod" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/brmod-trmod,v
deleting revision 1\.1\.2\.1
done"
	  dotest binfiles2-o3 "${testcvs} -q admin -o :1.2 brmod-trmod" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/brmod-trmod,v
deleting revision 1\.2
deleting revision 1\.1
done"
	  dotest binfiles2-o4 "${testcvs} -q log -N brmod-trmod" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/brmod-trmod,v
Working file: brmod-trmod
head: 1\.3
branch:
locks: strict
access list:
keyword substitution: b
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.3
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
checkin
============================================================================="

	  dokeep
	  cd ../..
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  rm -r 1
	  ;;



	binfiles3)
	  # More binary file tests, especially removing, adding, &c.
	  # See "binfiles" for a list of binary file tests.
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  mkdir 1; cd 1
	  dotest binfiles3-1 "${testcvs} -q co first-dir" ''
	  ${AWK} 'BEGIN { printf "%c%c%c@%c%c", 2, 10, 137, 13, 10 }' \
	    </dev/null | ${TR} '@' '\000' >binfile.dat
	  cd first-dir
	  echo hello >file1
	  dotest binfiles3-2 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest binfiles3-3 "${testcvs} -q ci -m add-it" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  rm file1
	  dotest binfiles3-4 "${testcvs} rm file1" \
"${SPROG} remove: scheduling .file1. for removal
${SPROG} remove: use .${SPROG} commit. to remove this file permanently"
	  dotest binfiles3-5 "${testcvs} -q ci -m remove-it" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: delete; previous revision: 1\.1"
	  cp ../binfile.dat file1
	  dotest binfiles3-6 "${testcvs} add -kb file1" \
"$SPROG add: Re-adding file .file1. after dead revision 1\.2\.
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  # The idea behind this test is to make sure that the file
	  # gets opened in binary mode to send to "cvs ci".
	  dotest binfiles3-6a "cat CVS/Entries" \
"/file1/0/[A-Za-z0-9 :]*/-kb/
D"
	  # TODO: This just tests the case where the old keyword
	  # expansion mode is the default (RCS_getexpand == NULL
	  # in checkaddfile()); should also test the case in which
	  # we are changing it from one non-default value to another.
	  dotest binfiles3-7 "$testcvs -q ci -m readd-it" \
"$SPROG commit: changing keyword expansion mode to -kb
$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.3; previous revision: 1\.2"
	  dotest binfiles3-8 "${testcvs} -q log -h -N file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.3
branch:
locks: strict
access list:
keyword substitution: b
total revisions: 3
============================================================================="

	  # OK, now test admin -o on a binary file.  See "admin"
	  # test for a more complete list of admin -o tests.
	  cp ${TESTDIR}/1/binfile.dat ${TESTDIR}/1/binfile4.dat
	  echo '%%$$##@@!!jjiiuull' | ${TR} j '\000' >>${TESTDIR}/1/binfile4.dat
	  cp ${TESTDIR}/1/binfile4.dat ${TESTDIR}/1/binfile5.dat
	  echo 'aawwee%$$##@@!!jjil' | ${TR} w '\000' >>${TESTDIR}/1/binfile5.dat

	  cp ../binfile4.dat file1
	  dotest binfiles3-9 "${testcvs} -q ci -m change" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.4; previous revision: 1\.3"
	  cp ../binfile5.dat file1
	  dotest binfiles3-10 "${testcvs} -q ci -m change" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.5; previous revision: 1\.4"
	  dotest binfiles3-11 "${testcvs} admin -o 1.3::1.5 file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
deleting revision 1\.4
done"
	  dotest binfiles3-12 "${testcvs} -q update -r 1.3 file1" "U file1"
	  dotest binfiles3-13 "cmp file1 ${TESTDIR}/1/binfile.dat" ""

	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	mcopy)
	  # See comment at "mwrap" test for list of other wrappers tests.
	  # Test cvs's ability to handle nonmergeable files specified with
	  # -m 'COPY' in wrappers.  Similar to the binfiles2 test,
	  # which tests the same thing for binary files
	  # (which are non-mergeable in the same sense).
	  #
	  # Cases (we are merging from the branch to the trunk):
	  # brmod) File modified on branch, not on trunk.
	  #      File should be copied over to trunk (no merging is needed).
	  # brmod-trmod) File modified on branch, also on trunk.
	  #      This is a conflict.  Present the user with both files and
	  #      let them figure it out.
	  # brmod-wdmod) File modified on branch, not modified in the trunk
	  #      repository, but modified in the (trunk) working directory.
	  #      This is also a conflict.

	  # For the moment, remote CVS can't pass wrappers from CVSWRAPPERS
	  # (see wrap_send).  So skip these tests for remote.
	  if $remote; then :; else

	    mkdir ${CVSROOT_DIRNAME}/first-dir
	    mkdir 1; cd 1
	    dotest mcopy-1 "${testcvs} -q co first-dir" ''
	    cd first-dir

	    # FIXCVS: unless a branch has at least one file on it,
	    # tag_check_valid won't know it exists.  So if brmod didn't
	    # exist, we would have to invent it.
	    echo 'brmod initial contents' >brmod
	    echo 'brmod-trmod initial contents' >brmod-trmod
	    echo 'brmod-wdmod initial contents' >brmod-wdmod
	    echo "* -m 'COPY'" >.cvswrappers
	    dotest mcopy-1a \
"${testcvs} add .cvswrappers brmod brmod-trmod brmod-wdmod" \
"${SPROG} add: scheduling file .\.cvswrappers. for addition
${SPROG} add: scheduling file .brmod. for addition
${SPROG} add: scheduling file .brmod-trmod. for addition
${SPROG} add: scheduling file .brmod-wdmod. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	    dotest mcopy-1b "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/\.cvswrappers,v  <--  \.cvswrappers
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/brmod,v  <--  brmod
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/brmod-trmod,v  <--  brmod-trmod
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/brmod-wdmod,v  <--  brmod-wdmod
initial revision: 1\.1"

	    # NOTE: .cvswrappers files are broken (see comment in
	    # src/wrapper.c).  So doing everything via the environment
	    # variable is a workaround.  Better would be to test them
	    # both.
	    CVSWRAPPERS="* -m 'COPY'"
	    export CVSWRAPPERS
	    dotest mcopy-2 "${testcvs} -q tag -b br" 'T \.cvswrappers
T brmod
T brmod-trmod
T brmod-wdmod'
	    dotest mcopy-3 "${testcvs} -q update -r br" ''
	    echo 'modify brmod on br' >brmod
	    echo 'modify brmod-trmod on br' >brmod-trmod
	    echo 'modify brmod-wdmod on br' >brmod-wdmod
	    dotest mcopy-5 "${testcvs} -q ci -m br-changes" \
"$CVSROOT_DIRNAME/first-dir/brmod,v  <--  brmod
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/brmod-trmod,v  <--  brmod-trmod
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/brmod-wdmod,v  <--  brmod-wdmod
new revision: 1\.1\.2\.1; previous revision: 1\.1"
	    dotest mcopy-6 "${testcvs} -q update -A" \
"[UP] brmod
[UP] brmod-trmod
[UP] brmod-wdmod"
	    dotest mcopy-7 "cat brmod brmod-trmod brmod-wdmod" \
"brmod initial contents
brmod-trmod initial contents
brmod-wdmod initial contents"

	    echo 'modify brmod-trmod again on trunk' >brmod-trmod
	    dotest mcopy-7a "${testcvs} -q ci -m tr-modify" \
"$CVSROOT_DIRNAME/first-dir/brmod-trmod,v  <--  brmod-trmod
new revision: 1\.2; previous revision: 1\.1"
	    echo 'modify brmod-wdmod in working dir' >brmod-wdmod

	    dotest mcopy-8 "${testcvs} -q update -j br" \
"U brmod
${SPROG} update: nonmergeable file needs merge
${SPROG} update: revision 1.1.2.1 from repository is now in brmod-trmod
${SPROG} update: file from working directory is now in .#brmod-trmod.1.2
C brmod-trmod
M brmod-wdmod
${SPROG} update: nonmergeable file needs merge
${SPROG} update: revision 1.1.2.1 from repository is now in brmod-wdmod
${SPROG} update: file from working directory is now in .#brmod-wdmod.1.1
C brmod-wdmod"

	    dotest mcopy-9 "cat brmod brmod-trmod brmod-wdmod" \
"modify brmod on br
modify brmod-trmod on br
modify brmod-wdmod on br"
	    dotest mcopy-9a "cat .#brmod-trmod.1.2 .#brmod-wdmod.1.1" \
"modify brmod-trmod again on trunk
modify brmod-wdmod in working dir"

	    # Test that everything was properly scheduled.
	    dotest mcopy-10 "${testcvs} -q ci -m checkin" \
"$CVSROOT_DIRNAME/first-dir/brmod,v  <--  brmod
new revision: 1\.2; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/brmod-trmod,v  <--  brmod-trmod
new revision: 1\.3; previous revision: 1\.2
$CVSROOT_DIRNAME/first-dir/brmod-wdmod,v  <--  brmod-wdmod
new revision: 1\.2; previous revision: 1\.1"

	    dokeep
	    cd ../..
	    modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	    rm -r 1
	    unset CVSWRAPPERS
	  fi # end of tests to be skipped for remote
	  ;;



	binwrap)
	  # Test the ability to specify binary-ness based on file name.
	  # See "mwrap" for a list of other wrappers tests.

	  mkdir dir-to-import
	  cd dir-to-import
	  touch foo.c foo.exe

	  # While we're here, test for rejection of duplicate tag names.
	  dotest_fail binwrap-0 \
	    "${testcvs} import -m msg -I ! first-dir dup dup" \
"${CPROG} \[import aborted\]: tag .dup. was specified more than once"

	  if ${testcvs} import -m message -I ! -W "*.exe -k 'b'" \
	      first-dir tag1 tag2 >>${LOGFILE}; then
	    pass binwrap-1
	  else
	    fail binwrap-1
	  fi
	  cd ..
	  rm -r dir-to-import
	  dotest binwrap-2 "${testcvs} -q co first-dir" 'U first-dir/foo.c
U first-dir/foo.exe'
	  dotest binwrap-3 "${testcvs} -q status first-dir" \
"===================================================================
File: foo\.c            	Status: Up-to-date

   Working revision:	1\.1\.1\.1.*
   Repository revision:	1\.1\.1\.1	${CVSROOT_DIRNAME}/first-dir/foo\.c,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: foo\.exe          	Status: Up-to-date

   Working revision:	1\.1\.1\.1.*
   Repository revision:	1\.1\.1\.1	${CVSROOT_DIRNAME}/first-dir/foo\.exe,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	-kb"

	  dokeep
	  rm -r first-dir
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	binwrap2)
	  # Test the ability to specify binary-ness based on file name.
	  # See "mwrap" for a list of other wrappers tests.

	  mkdir dir-to-import
	  cd dir-to-import
	  touch foo.c foo.exe

	  # Specify that all files are binary except *.c.
	  # The order seems to matter, with the earlier rules taking
	  # precedence.  I'm not sure whether that is good or not,
	  # but it is the current behavior.
	  if ${testcvs} import -m message -I ! \
	      -W "*.c -k 'o'" -W "* -k 'b'" \
	      first-dir tag1 tag2 >>${LOGFILE}; then
	    pass binwrap2-1
	  else
	    fail binwrap2-1
	  fi
	  cd ..
	  rm -r dir-to-import
	  dotest binwrap2-2 "${testcvs} -q co first-dir" 'U first-dir/foo.c
U first-dir/foo.exe'
	  dotest binwrap2-3 "${testcvs} -q status first-dir" \
"===================================================================
File: foo\.c            	Status: Up-to-date

   Working revision:	1\.1\.1\.1.*
   Repository revision:	1\.1\.1\.1	${CVSROOT_DIRNAME}/first-dir/foo\.c,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	-ko

===================================================================
File: foo\.exe          	Status: Up-to-date

   Working revision:	1\.1\.1\.1.*
   Repository revision:	1\.1\.1\.1	${CVSROOT_DIRNAME}/first-dir/foo\.exe,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	-kb"

	  dokeep
	  rm -r first-dir
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



        binwrap3)
          # Test communication of file-specified -k wrappers between
          # client and server, in `import':
          #
          #   1. Set up a directory tree, populate it with files.
          #   2. Give each directory a different .cvswrappers file. 
          #   3. Give the server its own .cvswrappers file.
          #   4. Import the whole tree, see if the right files got set
          #      to binary.
          #
          # The tree has a top ("0th") level, and two subdirs, sub1/
          # and sub2/; sub2/ contains directory subsub/.  Every
          # directory has a .cvswrappers file as well as regular
          # files.
          #
          # In the file names, "foo-b.*" should end up binary, and
          # "foo-t.*" should end up text.  Don't worry about the two
          # letter extensions; they're just there to help me keep
          # things straight.
          #
          # Here's the directory tree:
          #
          # ./
          #    .cvswrappers
          #    foo-b.c0
          #    foo-b.sb
          #    foo-t.c1
          #    foo-t.st
          #
          #    sub1/             sub2/
          #      .cvswrappers      .cvswrappers
          #      foo-b.c1          foo-b.sb
          #      foo-b.sb          foo-b.st
          #      foo-t.c0          foo-t.c0
          #      foo-t.st          foo-t.c1
          #                        foo-t.c2
          #                        foo-t.c3
          #
          #                        subsub/
          #                          .cvswrappers
          #                          foo-b.c3
          #                          foo-b.sb
          #                          foo-t.c0
          #                          foo-t.c1
          #                          foo-t.c2
          #                          foo-t.st

          binwrap3_line1="This is a test file "
          binwrap3_line2="containing little of use "
          binwrap3_line3="except this non-haiku"

          binwrap3_text="${binwrap3_line1}${binwrap3_line2}${binwrap3_line3}"

          cd ${TESTDIR}

	  # On Windows, we can't check out CVSROOT, because the case
	  # insensitivity means that this conflicts with cvsroot.
	  mkdir wnt
	  cd wnt

          mkdir binwrap3 # the 0th dir
          mkdir binwrap3/sub1
          mkdir binwrap3/sub2
          mkdir binwrap3/sub2/subsub
          
          echo "bar*" > binwrap3/.cvswrappers
          echo "*.c0 -k 'b'" >> binwrap3/.cvswrappers
          echo "whatever -k 'b'" >> binwrap3/.cvswrappers
          echo ${binwrap3_text} > binwrap3/foo-b.c0
          echo ${binwrap3_text} > binwrap3/bar-t.c0
          echo ${binwrap3_text} > binwrap3/foo-b.sb
          echo ${binwrap3_text} > binwrap3/foo-t.sb
          echo ${binwrap3_text} > binwrap3/foo-t.c1
          echo ${binwrap3_text} > binwrap3/foo-t.st

          echo "bar* -k 'kv'" > binwrap3/sub1/.cvswrappers
          echo "*.c1 -k 'b'" >> binwrap3/sub1/.cvswrappers
          echo "whatever -k 'b'" >> binwrap3/sub1/.cvswrappers
          echo ${binwrap3_text} > binwrap3/sub1/foo-b.c1
          echo ${binwrap3_text} > binwrap3/sub1/bar-t.c1
          echo ${binwrap3_text} > binwrap3/sub1/foo-b.sb
          echo ${binwrap3_text} > binwrap3/sub1/foo-t.sb
          echo ${binwrap3_text} > binwrap3/sub1/foo-t.c0
          echo ${binwrap3_text} > binwrap3/sub1/foo-t.st

          echo "bar*" > binwrap3/sub2/.cvswrappers
          echo "*.st -k 'b'" >> binwrap3/sub2/.cvswrappers
          echo ${binwrap3_text} > binwrap3/sub2/foo-b.sb
          echo ${binwrap3_text} > binwrap3/sub2/foo-t.sb
          echo ${binwrap3_text} > binwrap3/sub2/foo-b.st
          echo ${binwrap3_text} > binwrap3/sub2/bar-t.st
          echo ${binwrap3_text} > binwrap3/sub2/foo-t.c0
          echo ${binwrap3_text} > binwrap3/sub2/foo-t.c1
          echo ${binwrap3_text} > binwrap3/sub2/foo-t.c2
          echo ${binwrap3_text} > binwrap3/sub2/foo-t.c3

          echo "bar* -k 'kv'" > binwrap3/sub2/subsub/.cvswrappers
          echo "*.c3 -k 'b'" >> binwrap3/sub2/subsub/.cvswrappers
          echo "foo -k 'b'" >> binwrap3/sub2/subsub/.cvswrappers
          echo "c0* -k 'b'" >> binwrap3/sub2/subsub/.cvswrappers
          echo ${binwrap3_text} > binwrap3/sub2/subsub/foo-b.c3
          echo ${binwrap3_text} > binwrap3/sub2/subsub/bar-t.c3
          echo ${binwrap3_text} > binwrap3/sub2/subsub/foo-b.sb
          echo ${binwrap3_text} > binwrap3/sub2/subsub/foo-t.sb
          echo ${binwrap3_text} > binwrap3/sub2/subsub/foo-t.c0
          echo ${binwrap3_text} > binwrap3/sub2/subsub/foo-t.c1
          echo ${binwrap3_text} > binwrap3/sub2/subsub/foo-t.c2
          echo ${binwrap3_text} > binwrap3/sub2/subsub/foo-t.st

          # Now set up CVSROOT/cvswrappers, the easy way:
	  dotest binwrap3-1 "${testcvs} -q co CVSROOT" "[UP] CVSROOT${DOTSTAR}"
	  cd CVSROOT
          # This destroys anything currently in cvswrappers, but
	  # presumably other tests will take care of it themselves if
	  # they use cvswrappers:
	  echo "foo-t.sb" > cvswrappers
	  echo "foo*.sb  -k 'b'" >> cvswrappers
	  dotest binwrap3-2 "${testcvs} -q ci -m cvswrappers-mod" \
"$CVSROOT_DIRNAME/CVSROOT/cvswrappers,v  <--  cvswrappers
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
          cd ..

          # Avoid environmental interference
          CVSWRAPPERS_save=${CVSWRAPPERS}
          unset CVSWRAPPERS

          # Do the import
          cd binwrap3
	  # Not importing .cvswrappers tests whether the client is really
	  # letting the server know "honestly" whether the file is binary,
	  # rather than just letting the server see the .cvswrappers file.
          dotest binwrap3-2a \
"${testcvs} import -m . -I .cvswrappers binwrap3 tag1 tag2" \
"[NI] ${DOTSTAR}"

	  # OK, now test "cvs add".
          cd ..
	  rm -r binwrap3
          dotest binwrap3-2b "${testcvs} co binwrap3" "${DOTSTAR}"
          cd binwrap3
	  cd sub2
	  echo "*.newbin -k 'b'" > .cvswrappers
	  echo .cvswrappers >.cvsignore
	  echo .cvsignore >>.cvsignore
	  touch file1.newbin file1.txt
	  dotest binwrap3-2c "${testcvs} add file1.newbin file1.txt" \
"${SPROG} add: scheduling file .file1\.newbin. for addition
${SPROG} add: scheduling file .file1\.txt. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  dotest binwrap3-2d "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/binwrap3/sub2/file1\.newbin,v  <--  file1\.newbin
initial revision: 1\.1
$CVSROOT_DIRNAME/binwrap3/sub2/file1\.txt,v  <--  file1\.txt
initial revision: 1\.1"
	  cd ..

          # Now check out the module and see which files are binary.
          cd ..
	  rm -r binwrap3
          dotest binwrap3-3 "${testcvs} co binwrap3" "${DOTSTAR}"
          cd binwrap3

          # Running "cvs status" and matching output is too
          # error-prone, too likely to falsely fail.  Instead, we'll
          # just grep the Entries lines:

          dotest binwrap3-top1 "grep foo-b.c0 ./CVS/Entries" \
                 "/foo-b.c0/1.1.1.1/[A-Za-z0-9 	:]*/-kb/"

          dotest binwrap3-top2 "grep foo-b.sb ./CVS/Entries" \
                 "/foo-b.sb/1.1.1.1/[A-Za-z0-9 	:]*/-kb/"

          dotest binwrap3-top3 "grep foo-t.c1 ./CVS/Entries" \
                 "/foo-t.c1/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-top4 "grep foo-t.st ./CVS/Entries" \
                 "/foo-t.st/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-top5 "grep foo-t.sb ./CVS/Entries" \
                 "/foo-t.sb/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-top6 "grep bar-t.c0 ./CVS/Entries" \
                 "/bar-t.c0/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-sub1-1 "grep foo-b.c1 sub1/CVS/Entries" \
                 "/foo-b.c1/1.1.1.1/[A-Za-z0-9 	:]*/-kb/"

          dotest binwrap3-sub1-2 "grep foo-b.sb sub1/CVS/Entries" \
                 "/foo-b.sb/1.1.1.1/[A-Za-z0-9 	:]*/-kb/"

          dotest binwrap3-sub1-3 "grep foo-t.c0 sub1/CVS/Entries" \
                 "/foo-t.c0/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-sub1-4 "grep foo-t.st sub1/CVS/Entries" \
                 "/foo-t.st/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-sub1-5 "grep foo-t.sb sub1/CVS/Entries" \
                 "/foo-t.sb/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-sub1-6 "grep bar-t.c1 sub1/CVS/Entries" \
                 "/bar-t.c1/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-sub2-1 "grep foo-b.sb sub2/CVS/Entries" \
                 "/foo-b.sb/1.1.1.1/[A-Za-z0-9 	:]*/-kb/"

          dotest binwrap3-sub2-2 "grep foo-b.st sub2/CVS/Entries" \
                 "/foo-b.st/1.1.1.1/[A-Za-z0-9 	:]*/-kb/"

          dotest binwrap3-sub2-3 "grep foo-t.c0 sub2/CVS/Entries" \
                 "/foo-t.c0/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-sub2-4 "grep foo-t.c1 sub2/CVS/Entries" \
                 "/foo-t.c1/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-sub2-5 "grep foo-t.c2 sub2/CVS/Entries" \
                 "/foo-t.c2/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-sub2-6 "grep foo-t.c3 sub2/CVS/Entries" \
                 "/foo-t.c3/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-sub2-7 "grep foo-t.sb sub2/CVS/Entries" \
                 "/foo-t.sb/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-sub2-8 "grep bar-t.st sub2/CVS/Entries" \
                 "/bar-t.st/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-subsub1 "grep foo-b.c3 sub2/subsub/CVS/Entries" \
                 "/foo-b.c3/1.1.1.1/[A-Za-z0-9 	:]*/-kb/"

          dotest binwrap3-subsub2 "grep foo-b.sb sub2/subsub/CVS/Entries" \
                 "/foo-b.sb/1.1.1.1/[A-Za-z0-9 	:]*/-kb/"

          dotest binwrap3-subsub3 "grep foo-t.c0 sub2/subsub/CVS/Entries" \
                 "/foo-t.c0/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-subsub4 "grep foo-t.c1 sub2/subsub/CVS/Entries" \
                 "/foo-t.c1/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-subsub5 "grep foo-t.c2 sub2/subsub/CVS/Entries" \
                 "/foo-t.c2/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-subsub6 "grep foo-t.st sub2/subsub/CVS/Entries" \
                 "/foo-t.st/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-subsub7 "grep foo-t.sb sub2/subsub/CVS/Entries" \
                 "/foo-t.sb/1.1.1.1/[A-Za-z0-9 	:]*//"

          dotest binwrap3-subsub8 "grep bar-t.c3 sub2/subsub/CVS/Entries" \
                 "/bar-t.c3/1.1.1.1/[A-Za-z0-9 	:]*//"

	  dotest binwrap3-sub2-add1 "grep file1.newbin sub2/CVS/Entries" \
	    "/file1.newbin/1.1/[A-Za-z0-9 	:]*/-kb/"
	  dotest binwrap3-sub2-add2 "grep file1.txt sub2/CVS/Entries" \
	    "/file1.txt/1.1/[A-Za-z0-9 	:]*//"

          # Restore and clean up
	  dokeep
          cd ..
	  rm -r binwrap3 CVSROOT
	  cd ..
	  rm -r wnt
	  modify_repo rm -rf $CVSROOT_DIRNAME/binwrap3
          CVSWRAPPERS=${CVSWRAPPERS_save}
          ;;



	mwrap)
	  # Tests of various wrappers features:
	  # -m 'COPY' and cvs update: mwrap
	  # -m 'COPY' and joining: mcopy
	  # -k: binwrap, binwrap2
	  # -t/-f: hasn't been written yet.
	  # 
	  # Tests of different ways of specifying wrappers:
	  # CVSROOT/cvswrappers: mwrap
	  # -W: binwrap, binwrap2
	  # .cvswrappers in working directory, local: mcopy
	  # CVSROOT/cvswrappers, .cvswrappers remote: binwrap3
	  # CVSWRAPPERS environment variable: mcopy

	  # This test is similar to binfiles-con1; -m 'COPY' specifies
	  # non-mergeableness the same way that -kb does.

	  # On Windows, we can't check out CVSROOT, because the case
	  # insensitivity means that this conflicts with cvsroot.
	  mkdir wnt
	  cd wnt

	  dotest mwrap-c1 "${testcvs} -q co CVSROOT" "[UP] CVSROOT${DOTSTAR}"
	  cd CVSROOT
	  echo "* -m 'COPY'" >>cvswrappers
	  dotest mwrap-c2 "${testcvs} -q ci -m wrapper-mod" \
"$CVSROOT_DIRNAME/CVSROOT/cvswrappers,v  <--  cvswrappers
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  cd ..
	  mkdir m1; cd m1
	  dotest mwrap-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest mwrap-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  touch aa
	  dotest mwrap-3 "${testcvs} add aa" \
"${SPROG} add: scheduling file .aa. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest mwrap-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/aa,v  <--  aa
initial revision: 1\.1"
	  cd ../..
	  mkdir m2; cd m2
	  dotest mwrap-5 "${testcvs} -q co first-dir" "U first-dir/aa"
	  cd first-dir
	  echo "changed in m2" >aa
	  dotest mwrap-6 "${testcvs} -q ci -m m2-mod" \
"$CVSROOT_DIRNAME/first-dir/aa,v  <--  aa
new revision: 1\.2; previous revision: 1\.1"
	  cd ../..
	  cd m1/first-dir
	  echo "changed in m1" >aa
	    dotest mwrap-7 "$testcvs -nq update" \
"$SPROG update: nonmergeable file needs merge
$SPROG update: revision 1\.2 from repository is now in aa
$SPROG update: file from working directory is now in \.#aa\.1\.1
C aa"
	  dotest mwrap-8 "$testcvs -q update" \
"$SPROG update: nonmergeable file needs merge
$SPROG update: revision 1\.2 from repository is now in aa
$SPROG update: file from working directory is now in \.#aa\.1\.1
C aa"
	  dotest mwrap-9 "cat aa" "changed in m2"
	  dotest mwrap-10 "cat .#aa.1.1" "changed in m1"

	  dokeep
	  restore_adm
	  cd ../..
	  rm -r CVSROOT
	  rm -r m1 m2
	  cd ..
	  rm -r wnt
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	info)
	  # Administrative file tests.
	  # Here is a list of where each administrative file is tested:
	  # loginfo: info
	  # modules: modules, modules2, modules3
	  # cvsignore: ignore
	  # verifymsg: info
	  # cvswrappers: mwrap
	  # taginfo: taginfo
	  # posttag: posttag
	  # postadmin: admin
	  # postwatch: devcom3
	  # config: config
	  # config2: MinCompressionLevel and MaxCompressionLevel in config

	  # On Windows, we can't check out CVSROOT, because the case
	  # insensitivity means that this conflicts with cvsroot.
	  mkdir wnt
	  cd wnt

	  dotest info-1 "$testcvs -q co CVSROOT" "[UP] CVSROOT${DOTSTAR}"
	  cd CVSROOT
	  dotest info-2 "$testcvs -Q tag info-start"
	  sed -e's/%p/ALL/' <loginfo >tmploginfo
	  mv tmploginfo loginfo
	  echo "ALL sh -c \"echo x\${=MYENV}\${=OTHER}y\${=ZEE}=\$USER=\$COMMITID=\$SESSIONID=\$CVSROOT= >>$TESTDIR/testlog; cat >/dev/null\"" >> loginfo
          # The following cases test the format string substitution
          echo "ALL echo %{} >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "ALL echo %x >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "ALL echo % >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "ALL echo %{sxVv} >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "ALL echo %{v} >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "ALL echo %s %s >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "ALL echo %{V}AX >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "first-dir echo %sux >>$TESTDIR/testlog2; cat >/dev/null" \
            >> loginfo
	  sed -e's/^UseNewInfoFmtStrings=yes$/#&/' <config >tmpconfig
	  mv tmpconfig config

	  # Might be nice to move this to crerepos tests; it should
	  # work to create a loginfo file if you didn't create one
	  # with "cvs init".
	  : dotest info-2 "$testcvs add loginfo" \
"$SPROG add: scheduling file \`loginfo' for addition
$SPROG add: use \`$SPROG commit' to add this file permanently"

	  dotest_fail info-3 "$testcvs -q ci -m new-loginfo" \
"$TESTDIR/cvsroot/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$CVSROOT_DIRNAME/CVSROOT/loginfo,v  <--  loginfo
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database
$SPROG commit: loginfo:[0-9]*: no such user variable \${=MYENV}
$SPROG \[commit aborted\]: Unknown format character in info file ('').
Info files are the hook files, verifymsg, taginfo, commitinfo, etc\."
	  cd ..

	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  dotest info-5 "$testcvs -q co first-dir" ''
	  cd first-dir
	  touch file1
	  dotest info-6 "$testcvs add file1" \
"$SPROG add: scheduling file \`file1' for addition
$SPROG add: use \`$SPROG commit' to add this file permanently"
	  echo "cvs -s OTHER=not-this -s MYENV=env-" >>$HOME/.cvsrc
	  dotest info-6b "$testcvs -q -s OTHER=value ci -m add-it" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1
$SPROG commit: loginfo:[0-9]*: no such user variable \${=ZEE}
$SPROG commit: warning:  Set to use deprecated info format strings\.  Establish
compatibility with the new info file format strings (add a temporary .1. in
all info files after each .%. which doesn.t represent a literal percent)
and set UseNewInfoFmtStrings=yes in CVSROOT/config\.  After that, convert
individual command lines and scripts to handle the new format at your
leisure\." \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1
$SPROG commit: warning:  Set to use deprecated info format strings\.  Establish
compatibility with the new info file format strings (add a temporary .1. in
all info files after each .%. which doesn.t represent a literal percent)
and set UseNewInfoFmtStrings=yes in CVSROOT/config\.  After that, convert
individual command lines and scripts to handle the new format at your
leisure\.
$SPROG commit: loginfo:[0-9]*: no such user variable \${=ZEE}"
	  echo line0 >>file1
	  dotest info-6c "$testcvs -q -sOTHER=foo ci -m mod-it" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1
$SPROG commit: loginfo:[0-9]*: no such user variable \${=ZEE}
$SPROG commit: warning:  Set to use deprecated info format strings\.  Establish
compatibility with the new info file format strings (add a temporary .1. in
all info files after each .%. which doesn.t represent a literal percent)
and set UseNewInfoFmtStrings=yes in CVSROOT/config\.  After that, convert
individual command lines and scripts to handle the new format at your
leisure\." \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1
$SPROG commit: warning:  Set to use deprecated info format strings\.  Establish
compatibility with the new info file format strings (add a temporary .1. in
all info files after each .%. which doesn.t represent a literal percent)
and set UseNewInfoFmtStrings=yes in CVSROOT/config\.  After that, convert
individual command lines and scripts to handle the new format at your
leisure\.
$SPROG commit: loginfo:[0-9]*: no such user variable \${=ZEE}"
	  echo line1 >>file1
	  dotest info-7 "${testcvs} -q -s OTHER=value -s ZEE=z ci -m mod-it" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.3; previous revision: 1\.2
$SPROG commit: warning:  Set to use deprecated info format strings\.  Establish
compatibility with the new info file format strings (add a temporary .1. in
all info files after each .%. which doesn.t represent a literal percent)
and set UseNewInfoFmtStrings=yes in CVSROOT/config\.  After that, convert
individual command lines and scripts to handle the new format at your
leisure\."

	  cd ..
	  dotest info-9 "cat $TESTDIR/testlog" \
"xenv-valueyz=${username}=${commitid}=${commitid}=${CVSROOT_DIRNAME}="
          dotest info-10 "cat $TESTDIR/testlog2" \
'first-dir
first-dir
first-dir
first-dir file1,,NONE,1.1
first-dir 1.1
first-dir file1 %s
first-dir NONEAX
first-dir file1ux
first-dir
first-dir
first-dir
first-dir file1,,1.1,1.2
first-dir 1.2
first-dir file1 %s
first-dir 1.1AX
first-dir file1ux
first-dir
first-dir
first-dir
first-dir file1,,1.2,1.3
first-dir 1.3
first-dir file1 %s
first-dir 1.2AX
first-dir file1ux'

	  # and make sure adding a '1' in the format strings really does ensure
	  # ensure backwards compatibility.
	  #
	  # these tests are identical to the above except for the loginfo setup
	  # and the project name
	  cd CVSROOT
	  dotest info-setup-intfmt-1 "$testcvs -q up -prinfo-start config >config"
	  dotest info-setup-intfmt-2 "$testcvs -q up -prinfo-start loginfo >loginfo"
	  sed -e's/%p/ALL/' <loginfo >tmploginfo
	  mv tmploginfo loginfo
	  echo "ALL sh -c \"echo x\${=MYENV}\${=OTHER}y\${=ZEE}=\$USER=\$CVSROOT= >>$TESTDIR/testlog; cat >/dev/null\"" >> loginfo
          # The following cases test the format string substitution
          echo "ALL echo %1{} >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "ALL echo %1x >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "ALL echo %1 >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "ALL echo %1{sxVv} >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "ALL echo %1{v} >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "ALL echo %1s %%s >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "ALL echo %1{V}AX >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "third-dir echo %1sux >>$TESTDIR/testlog2; cat >/dev/null" \
            >> loginfo

	  dotest info-setup-intfmt-2 "${testcvs} -q -s ZEE=garbage ci -m nuke-admin-for-info-intfmt" \
"$TESTDIR/cvsroot/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$TESTDIR/cvsroot/CVSROOT/loginfo,v  <--  loginfo
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database
$SPROG commit: warning:  Set to use deprecated info format strings\.  Establish
compatibility with the new info file format strings (add a temporary .1. in
all info files after each .%. which doesn.t represent a literal percent)
and set UseNewInfoFmtStrings=yes in CVSROOT/config\.  After that, convert
individual command lines and scripts to handle the new format at your
leisure\."
	  cd ..

	  # delete the logs now so the results look more like the last tests
	  # (they won't include the config file update)
	  rm ${TESTDIR}/testlog ${TESTDIR}/testlog2

	  modify_repo mkdir $CVSROOT_DIRNAME/third-dir
	  dotest info-intfmt-5 "${testcvs} -q co third-dir" ''
	  cd third-dir
	  touch file1
	  dotest info-intfmt-6 "${testcvs} add file1" \
"${SPROG}"' add: scheduling file `file1'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  echo "cvs -s OTHER=not-this -s MYENV=env-" >>$HOME/.cvsrc
	  dotest info-intfmt-6b "${testcvs} -q -s OTHER=value ci -m add-it" \
"${TESTDIR}/cvsroot/third-dir/file1,v  <--  file1
initial revision: 1\.1
${SPROG} commit: loginfo:[0-9]*: no such user variable \${=ZEE}
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\."
	  echo line0 >>file1
	  dotest info-intfmt-6c "${testcvs} -q -sOTHER=foo ci -m mod-it" \
"${TESTDIR}/cvsroot/third-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1
${SPROG} commit: loginfo:[0-9]*: no such user variable \${=ZEE}
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\."
	  echo line1 >>file1
	  dotest info-intfmt-7 "${testcvs} -q -s OTHER=value -s ZEE=z ci -m mod-it" \
"${TESTDIR}/cvsroot/third-dir/file1,v  <--  file1
new revision: 1\.3; previous revision: 1\.2
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\.
${SPROG} commit: Using deprecated info format strings\.  Convert your scripts to use
the new argument format and remove '1's from your info file format strings\."

	  cd ..
	  dotest info-intfmt-9 "cat $TESTDIR/testlog" "xenv-valueyz=${username}=${TESTDIR}/cvsroot="
          dotest info-intfmt-10 "cat $TESTDIR/testlog2" \
'third-dir
third-dir
third-dir
third-dir file1,,NONE,1.1
third-dir 1.1
third-dir file1 %s
third-dir NONEAX
third-dir file1ux
third-dir
third-dir
third-dir
third-dir file1,,1.1,1.2
third-dir 1.2
third-dir file1 %s
third-dir 1.1AX
third-dir file1ux
third-dir
third-dir
third-dir
third-dir file1,,1.2,1.3
third-dir 1.3
third-dir file1 %s
third-dir 1.2AX
third-dir file1ux'

	  rm ${TESTDIR}/testlog ${TESTDIR}/testlog2

	  # test the new format strings too
	  cd CVSROOT
	  dotest info-setup-newfmt-1 "$testcvs -q up -prinfo-start loginfo >loginfo"
	  echo "ALL sh -c \"echo x\${=MYENV}\${=OTHER}y\${=ZEE}=\$USER=\$CVSROOT= >>$TESTDIR/testlog; cat >/dev/null\" %{sVv}" >> loginfo
          # The following cases test the format string substitution
          echo "ALL echo %p \"%{sTVv}\" >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "ALL echo %{v} >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "ALL echo %s >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "ALL echo %{V}AX >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
          echo "second-dir echo %sux >>$TESTDIR/testlog2; cat >/dev/null" >> loginfo
	  dotest info-setup-newfmt-2 "$testcvs -q -s ZEE=garbage ci -m nuke-admin-for-info-newfmt" \
"${CVSROOT_DIRNAME}/CVSROOT/loginfo,v  <--  loginfo
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
${SPROG} commit: Rebuilding administrative file database"
	  cd ..

	  # delete the logs now so the results look more like the last tests
	  # (they won't include the config file update)
	  rm ${TESTDIR}/testlog ${TESTDIR}/testlog2

	  modify_repo mkdir $CVSROOT_DIRNAME/fourth-dir
	  dotest info-newfmt-1 "${testcvs} -q co fourth-dir" ''
	  cd fourth-dir
	  touch file1
	  dotest info-newfmt-2 "${testcvs} add file1" \
"${SPROG}"' add: scheduling file `file1'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  echo "cvs -s OTHER=not-this -s MYENV=env-" >>$HOME/.cvsrc
	  dotest info-newfmt-3 "$testcvs -q -s OTHER=value ci -m add-it" \
"$TESTDIR/cvsroot/fourth-dir/file1,v  <--  file1
initial revision: 1\.1
$SPROG commit: loginfo:[0-9]*: no such user variable \${=ZEE}"
	  echo line0 >>file1
	  dotest info-newfmt-4 "$testcvs -q -sOTHER=foo ci -m mod-it" \
"$TESTDIR/cvsroot/fourth-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1
$SPROG commit: loginfo:[0-9]*: no such user variable \${=ZEE}"
	  echo line1 >>file1
	  dotest info-newfmt-5 "${testcvs} -q -s OTHER=value -s ZEE=z ci -m mod-it" \
"${TESTDIR}/cvsroot/fourth-dir/file1,v  <--  file1
new revision: 1\.3; previous revision: 1\.2"

	  cd ..
	  dotest info-newfmt-6 "cat $TESTDIR/testlog" \
"xenv-valueyz=${username}=${TESTDIR}/cvsroot="
          dotest info-newfmt-7 "cat $TESTDIR/testlog2" \
'fourth-dir file1  NONE 1\.1
1\.1
file1
NONEAX
fourth-dir file1  1\.1 1\.2
1\.2
file1
1\.1AX
fourth-dir file1  1\.2 1\.3
1\.3
file1
1\.2AX'

	  # clean up after newfmt tests
	  cd CVSROOT
	  dotest info-cleanup-newfmt-1 "$testcvs -q up -prinfo-start loginfo >loginfo"
	  dotest info-cleanup-newfmt-2 "$testcvs -q ci -m nuke-loginfo" \
"$CVSROOT_DIRNAME/CVSROOT/loginfo,v  <--  loginfo
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	  # clean up the logs
	  rm ${TESTDIR}/testlog ${TESTDIR}/testlog2

	  # Now test verifymsg
	  cat >${TESTDIR}/vscript <<EOF
#!${TESTSHELL}
echo vscript "\$@"
if sed 1q < \$1 | grep '^BugId:[ ]*[0-9][0-9]*$' > /dev/null; then
    exit 0
elif sed 1q < \$1 | grep '^BugId:[ ]*new$' > /dev/null; then
    echo A new bugid was found. >> \$1
    exit 0
else
    echo "No BugId found."
    sleep 1
    exit 1
fi
EOF
	  cat >${TESTDIR}/vscript2 <<EOF
#!${TESTSHELL}
echo vscript2 "\$@"
if test -f CVS/Repository; then
	repo=\`cat CVS/Repository\`
else
	repo=\`pwd\`
fi
echo \$repo
if echo "\$repo" |grep yet-another/ >/dev/null 2>&1; then
	exit 1
else
	exit 0
fi
EOF
	  # Grumble, grumble, mumble, search for "Cygwin".
	  if test -n "$remotehost"; then
	    $CVS_RSH $remotehost "chmod +x ${TESTDIR}/vscript*"
	  else
	    chmod +x ${TESTDIR}/vscript*
	  fi
	  echo "^first-dir/yet-another\\(/\\|\$\\) ${TESTDIR}/vscript2 %l %{sV}" >verifymsg
	  echo "^first-dir\\(/\\|\$\\) ${TESTDIR}/vscript %l %{sV}" >>verifymsg
	  echo "^missing-script\$ ${TESTDIR}/bogus %l" >>verifymsg
	  echo "^missing-var\$ ${TESTDIR}/vscript %l \${=Bogus}" >>verifymsg
	  # first test the directory independant verifymsg
	  dotest info-v1 "${testcvs} -q ci -m add-verification" \
"$CVSROOT_DIRNAME/CVSROOT/verifymsg,v  <--  verifymsg
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	  cd ../first-dir
	  echo line2 >>file1
	  dotest_fail info-v2 "${testcvs} -q ci -m bogus" \
"vscript $tempname file1 1\.3
No BugId found\.
${SPROG} \[commit aborted\]: Message verification failed"

	  cat >${TESTDIR}/comment.tmp <<EOF
BugId: 42
and many more lines after it
EOF
	  dotest info-v3 "${testcvs} -q ci -F ${TESTDIR}/comment.tmp" \
"vscript $tempname file1 1\.3
$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.4; previous revision: 1\.3"
	  rm ${TESTDIR}/comment.tmp

	  cd ..
	  mkdir another-dir
	  cd another-dir
	  touch file2
	  dotest_fail info-v4 \
	    "${testcvs} import -m bogus first-dir/another x y" \
"vscript $tempname - Imported sources NONE
No BugId found\.
${SPROG} \[import aborted\]: Message verification failed"

	  # now verify that directory dependent verifymsgs work
	  dotest info-v5 \
	    "${testcvs} import -m bogus first-dir/yet-another x y" \
"vscript2 $tempname - Imported sources NONE
$TESTDIR/wnt/another-dir
N first-dir/yet-another/file2

No conflicts created by this import" \
"vscript2 $tempname - Imported sources NONE
$CVSROOT_DIRNAME/first-dir/yet-another
N first-dir/yet-another/file2

No conflicts created by this import"

	  # FIXCVS
	  #
	  # note that in the local case the error message is the same as
	  # info-v5
	  #
	  # This means that the verifymsg scripts cannot reliably and
	  # consistantly obtain information on which directory is being
	  # committed to.  Thus it is currently useless for them to be
	  # running in every dir.  They should either be run once or
	  # directory information should be passed.
	  if $remote; then
	    dotest_fail info-v6r \
	      "${testcvs} import -m bogus first-dir/yet-another/and-another x y" \
"vscript2 $tempname - Imported sources NONE
$CVSROOT_DIRNAME/first-dir/yet-another/and-another
$SPROG \[import aborted\]: Message verification failed"
	  else
	    dotest info-v6 \
	      "${testcvs} import -m bogus first-dir/yet-another/and-another x y" \
"vscript2 $tempname - Imported sources NONE
$TESTDIR/wnt/another-dir
N first-dir/yet-another/and-another/file2

No conflicts created by this import"
	  fi

	  # check that errors invoking the script cause verification failure
	  #
	  # The second text below occurs on Cygwin, where I assume execvp
	  # does not return to let CVS print the error message when its
	  # argument does not exist.
	  dotest_fail info-v7 "${testcvs} import -m bogus missing-script x y" \
"${SPROG} import: cannot exec ${TESTDIR}/bogus: No such file or directory
${SPROG} \[import aborted\]: Message verification failed" \
"${SPROG} \[import aborted\]: Message verification failed"

	  dotest_fail info-v8 "${testcvs} import -m bogus missing-var x y" \
"${SPROG} import: verifymsg:4: no such user variable \${=Bogus}
${SPROG} \[import aborted\]: Message verification failed"

	  rm file2
	  cd ..
	  rmdir another-dir

	  cd CVSROOT
	  echo "RereadLogAfterVerify=always" >>config
	  dotest info-rereadlog-1 "${testcvs} -q ci -m add-RereadLogAfterVerify=always" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  cd ../first-dir
	  echo line3 >>file1
	  cat >${TESTDIR}/comment.tmp <<EOF
BugId: new
See what happens next.
EOF
	  dotest info-reread-2 "${testcvs} -q ci -F ${TESTDIR}/comment.tmp" \
"vscript $tempname file1 1\.4
$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.5; previous revision: 1\.4"
	  dotest info-reread-3 "${testcvs} -q log -N -r1.5 file1" "
.*
BugId: new
See what happens next.
A new bugid was found.
============================================================================="

	  cd ../CVSROOT
	  grep -v "RereadLogAfterVerify" config > config.new
	  mv config.new config
	  echo "RereadLogAfterVerify=stat" >>config
	  dotest info-reread-4 \
"$testcvs -q ci -m add-RereadLogAfterVerify=stat" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  cd ../first-dir
	  echo line4 >>file1
	  cat >${TESTDIR}/comment.tmp <<EOF
BugId: new
See what happens next with stat.
EOF
	  dotest info-reread-5 "${testcvs} -q ci -F ${TESTDIR}/comment.tmp" \
"vscript $tempname file1 1\.5
$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.6; previous revision: 1\.5"
	  dotest info-reread-6 "${testcvs} -q log -N -r1.6 file1" "
.*
BugId: new
See what happens next with stat.
A new bugid was found.
============================================================================="

	  cd ../CVSROOT
	  grep -v "RereadLogAfterVerify" config > config.new
	  mv config.new config
	  echo "RereadLogAfterVerify=never" >>config
	  dotest info-reread-7 \
"$testcvs -q ci -m add-RereadLogAfterVerify=never" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  cd ../first-dir
	  echo line5 >>file1
	  cat >${TESTDIR}/comment.tmp <<EOF
BugId: new
See what happens next.
EOF
	  dotest info-reread-8 "${testcvs} -q ci -F ${TESTDIR}/comment.tmp" \
"vscript $tempname file1 1\.6
$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.7; previous revision: 1\.6"
	  dotest info-reread-6 "${testcvs} -q log -N -r1.7 file1" "
.*
BugId: new
See what happens next.
============================================================================="

	  cd ../CVSROOT
	  dotest info-reread-cleanup-1 "$testcvs -q up -prinfo-start config >config"
	  # Append the NULL format string until we remove the deprecation
	  # warning for lack of format strings.
	  echo 'DEFAULT false %n' >verifymsg
	  echo 'DEFAULT true %n' >>verifymsg
	  dotest info-multdef "${testcvs} -q ci -m multdef" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$CVSROOT_DIRNAME/CVSROOT/verifymsg,v  <--  verifymsg
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	  cd ../CVSROOT
	  dotest info-reread--cleanup-1 \
"$testcvs -q up -prinfo-start verifymsg >verifymsg"
	  dotest info-cleanup-verifymsg "$testcvs -q ci -m nuke-verifymsg" \
"$SPROG commit: Multiple .DEFAULT. lines (1 and 2) in verifymsg file
$CVSROOT_DIRNAME/CVSROOT/verifymsg,v  <--  verifymsg
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	  dokeep
	  rm ${TESTDIR}/vscript*
	  cd ..

	  dotest info-cleanup-0 "$testcvs -n release -d CVSROOT" \
"You have \[0\] altered files in this repository\."

	  dotest info-cleanup-1 \
"echo yes |${testcvs} -q release -d CVSROOT >/dev/null"
	  dotest info-cleanup-2 \
"echo yes |${testcvs} -q release -d first-dir >/dev/null"
	  dotest info-cleanup-3 \
"echo yes |${testcvs} -q release -d third-dir >/dev/null"
	  dotest info-cleanup-4 \
"echo yes |${testcvs} -q release -d fourth-dir >/dev/null"

	  dokeep
	  cd ..
	  rm -r wnt
	  rm $HOME/.cvsrc
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir \
			     $CVSROOT_DIRNAME/third-dir \
			     $CVSROOT_DIRNAME/fourth-dir
	  ;;



	taginfo)
	  # Tests of the CVSROOT/taginfo file.  See the comment at the
	  # "info" tests for a full list of administrative file tests.

	  # all the oldfmt stuff can come out once we finish deprecating
	  # the old info file command line format stuff.
	  #
	  # grep the code for SUPPORT_OLD_INFO_FMT_STRINGS and see the stuff
	  # in configure.in about oldinfoformatsupport

	  mkdir 1; cd 1
	  dotest taginfo-init-1 "$testcvs -q co CVSROOT" "U CVSROOT/$DOTSTAR"
	  cd CVSROOT
	  dotest taginfo-init-2 "$testcvs -Q tag taginfo-start"
	  cat >$TESTDIR/1/loggit <<EOF
#!$TESTSHELL
if test "\$1" = rejectme; then
  exit 1
else
  echo "\$@" >>$TESTDIR/1/taglog
  exit 0
fi
EOF
	  # #^@&!^@ Cygwin.
	  if test -n "$remotehost"; then
	    $CVS_RSH $remotehost "chmod +x ${TESTDIR}/1/loggit"
	  else
	    chmod +x ${TESTDIR}/1/loggit
	  fi
	  echo "ALL ${TESTDIR}/1/loggit" >>taginfo
	  sed -e's/^UseNewInfoFmtStrings=yes$/#&/' <config >tmpconfig
	  mv tmpconfig config
	  sed -e's/%p/ALL/' <loginfo >tmploginfo
	  mv tmploginfo loginfo
	  dotest taginfo-2 "${testcvs} -q ci -m check-in-taginfo" \
"$TESTDIR/cvsroot/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$CVSROOT_DIRNAME/CVSROOT/loginfo,v  <--  loginfo
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$CVSROOT_DIRNAME/CVSROOT/taginfo,v  <--  taginfo
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  cd ..

	  # taginfo-3 used to rely on the top-level CVS directory
	  # being created to add "first-dir" to the repository.  Since
	  # that won't happen anymore, we create the directory in the
	  # repository.
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  dotest taginfo-3 "$testcvs -q co first-dir"

	  cd first-dir
	  echo first >file1
	  dotest taginfo-4 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest taginfo-5 "${testcvs} -q ci -m add-it" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1
$SPROG commit: warning:  Set to use deprecated info format strings\.  Establish
compatibility with the new info file format strings (add a temporary '1' in
all info files after each '%' which doesn't represent a literal percent)
and set UseNewInfoFmtStrings=yes in CVSROOT/config\.  After that, convert
individual command lines and scripts to handle the new format at your
leisure\."
	  dotest taginfo-6 "${testcvs} -q tag tag1" \
"${SPROG} tag: warning: taginfo line contains no format strings:
    \"${TESTDIR}/1/loggit\"
Filling in old defaults ('%t %o %p %{sv}'), but please be aware that this
usage is deprecated\.
T file1"
	  dotest taginfo-7 "${testcvs} -q tag -b br" \
"${SPROG} tag: warning: taginfo line contains no format strings:
    \"${TESTDIR}/1/loggit\"
Filling in old defaults ('%t %o %p %{sv}'), but please be aware that this
usage is deprecated\.
T file1"
	  dotest taginfo-8 "$testcvs -q update -r br"
	  echo add text on branch >>file1
	  dotest taginfo-9 "${testcvs} -q ci -m modify-on-br" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.1; previous revision: 1\.1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.1; previous revision: 1\.1
$SPROG commit: warning:  Set to use deprecated info format strings\.  Establish
compatibility with the new info file format strings (add a temporary '1' in
all info files after each '%' which doesn't represent a literal percent)
and set UseNewInfoFmtStrings=yes in CVSROOT/config\.  After that, convert
individual command lines and scripts to handle the new format at your
leisure\."
	  dotest taginfo-10 "${testcvs} -q tag -F -c brtag" \
"${SPROG} tag: warning: taginfo line contains no format strings:
    \"${TESTDIR}/1/loggit\"
Filling in old defaults ('%t %o %p %{sv}'), but please be aware that this
usage is deprecated\.
T file1"

	  dotest_fail taginfo-11 "${testcvs} -q tag rejectme" \
"${SPROG} tag: warning: taginfo line contains no format strings:
    \"${TESTDIR}/1/loggit\"
Filling in old defaults ('%t %o %p %{sv}'), but please be aware that this
usage is deprecated\.
${SPROG} tag: Pre-tag check failed
${SPROG} \[tag aborted\]: correct the above errors first!"

	  # When we are using taginfo to allow/disallow, it would be
	  # convenient to be able to use "cvs -n tag" to test whether
	  # the allow/disallow functionality is working as expected.
	  dotest taginfo-12 "${testcvs} -nq tag rejectme" \
"${SPROG} tag: warning: taginfo line contains no format strings:
    \"${TESTDIR}/1/loggit\"
Filling in old defaults ('%t %o %p %{sv}'), but please be aware that this
usage is deprecated\.
T file1"

	  # But when taginfo is used for logging, it is a pain for -n
	  # to call taginfo, since taginfo doesn't know whether -n was
	  # specified or not.
	  dotest taginfo-13 "${testcvs} -nq tag would-be-tag" \
"${SPROG} tag: warning: taginfo line contains no format strings:
    \"${TESTDIR}/1/loggit\"
Filling in old defaults ('%t %o %p %{sv}'), but please be aware that this
usage is deprecated\.
T file1"

	  # Deleting: the cases are basically either the tag existed,
	  # or it didn't exist.
	  dotest taginfo-14 "${testcvs} -q tag -d tag1" \
"${SPROG} tag: warning: taginfo line contains no format strings:
    \"${TESTDIR}/1/loggit\"
Filling in old defaults ('%t %o %p %{sv}'), but please be aware that this
usage is deprecated\.
D file1"
	  dotest taginfo-15 "${testcvs} -q tag -d tag1" \
"${SPROG} tag: warning: taginfo line contains no format strings:
    \"${TESTDIR}/1/loggit\"
Filling in old defaults ('%t %o %p %{sv}'), but please be aware that this
usage is deprecated\."

	  # Likewise with rtag.
	  dotest taginfo-16 "${testcvs} -q rtag tag1 first-dir" \
"${SPROG} rtag: warning: taginfo line contains no format strings:
    \"${TESTDIR}/1/loggit\"
Filling in old defaults ('%t %o %p %{sv}'), but please be aware that this
usage is deprecated\."
	  dotest taginfo-17 "${testcvs} -q rtag -d tag1 first-dir" \
"${SPROG} rtag: warning: taginfo line contains no format strings:
    \"${TESTDIR}/1/loggit\"
Filling in old defaults ('%t %o %p %{sv}'), but please be aware that this
usage is deprecated\."
	  dotest taginfo-18 "${testcvs} -q rtag -d tag1 first-dir" \
"${SPROG} rtag: warning: taginfo line contains no format strings:
    \"${TESTDIR}/1/loggit\"
Filling in old defaults ('%t %o %p %{sv}'), but please be aware that this
usage is deprecated\."

	  # The "br" example should be passing 1.1.2 or 1.1.0.2.
	  # But it turns out that is very hard to implement, since
	  # check_fileproc doesn't know what branch number it will
	  # get.  Probably the whole thing should be re-architected
	  # so that taginfo only allows/denies tagging, and a new
	  # hook, which is done from tag_fileproc, does logging.
	  # That would solve this, some more subtle races, and also
	  # the fact that it is nice for users to run "-n tag foo" to
	  # see whether a tag would be allowed.  Failing that,
	  # I suppose passing "1.1.branch" or "branch" for "br"
	  # would be an improvement.
	  dotest taginfo-examine-1 "cat ${TESTDIR}/1/taglog" \
"tag1 add first-dir file1 1\.1
br add first-dir file1 1\.1
brtag mov first-dir file1 1\.1\.2\.1
tag1 del first-dir file1 1\.1
tag1 del first-dir
tag1 add first-dir file1 1\.1
tag1 del first-dir file1 1\.1
tag1 del first-dir"

	  # now that we've tested the default operation, try a new
	  # style fmt string.
	  rm $TESTDIR/1/taglog
	  cd ..
	  cd CVSROOT
	  dotest taginfo-newfmt-init-1 \
"$testcvs -q up -prtaginfo-start taginfo >taginfo"
	  echo "ALL $TESTDIR/1/loggit %r %t %o %b %p %{sTVv}" >>taginfo
	  dotest taginfo-newfmt-init-2 "$testcvs -q ci -m check-in-taginfo" \
"$TESTDIR/cvsroot/CVSROOT/taginfo,v  <--  taginfo
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"  \
"$TESTDIR/cvsroot/CVSROOT/taginfo,v  <--  taginfo
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database
$SPROG commit: warning:  Set to use deprecated info format strings\.  Establish
compatibility with the new info file format strings (add a temporary '1' in
all info files after each '%' which doesn't represent a literal percent)
and set UseNewInfoFmtStrings=yes in CVSROOT/config\.  After that, convert
individual command lines and scripts to handle the new format at your
leisure\."

	  cat >${TESTDIR}/1/loggit <<EOF
#!${TESTSHELL}
if test "\$1" = rejectme; then
  exit 1
else
  while test "\$#" -gt 0; do
    echo "\$1" >>${TESTDIR}/1/taglog
    shift
  done
  exit 0
fi
EOF

	  cd ..
	  cd first-dir
	  dotest taginfo-newfmt-2 "${testcvs} -q update -A" "[UP] file1"
	  echo "bull pucky" >'file 2'
	  dotest taginfo-newfmt-2b "${testcvs} add 'file 2'" \
"${SPROG} add: scheduling file .file 2. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest taginfo-newfmt-2c "$testcvs -q ci -m add-it" \
"$TESTDIR/cvsroot/first-dir/file 2,v  <--  file 2
initial revision: 1\.1" \
"$TESTDIR/cvsroot/first-dir/file 2,v  <--  file 2
initial revision: 1\.1
$SPROG commit: warning:  Set to use deprecated info format strings\.  Establish
compatibility with the new info file format strings (add a temporary '1' in
all info files after each '%' which doesn't represent a literal percent)
and set UseNewInfoFmtStrings=yes in CVSROOT/config\.  After that, convert
individual command lines and scripts to handle the new format at your
leisure\."

	  dotest taginfo-newfmt-3 "${testcvs} -q tag tag1" \
"T file 2
T file1"
	  dotest taginfo-newfmt-4 "${testcvs} -q tag tag3" \
"T file 2
T file1"
	  dotest taginfo-newfmt-5 "$testcvs -q tag -rtag1 tag4" \
"T file 2
T file1"

	  dotest taginfo-newfmt-examine-1 "cat ${TESTDIR}/1/taglog" \
"$TESTDIR/cvsroot
tag1
add
N
first-dir
file 2

NONE
1\.1
file1

NONE
1\.1
$TESTDIR/cvsroot
tag3
add
N
first-dir
file 2

NONE
1\.1
file1

NONE
1\.1
$TESTDIR/cvsroot
tag4
add
N
first-dir
file 2
tag1
NONE
1\.1
file1
tag1
NONE
1\.1"

	  # now update to use the new format strings (really, disable support
	  # of the old format) and run the whole gamut of tests again.
	  rm ${TESTDIR}/1/taglog
	  cd ..
	  cd CVSROOT
	  cat >${TESTDIR}/1/loggit <<EOF
#!${TESTSHELL}
if test "\$1" = rejectme; then
  exit 1
else
  echo "\$@" >>${TESTDIR}/1/taglog
  exit 0
fi
EOF
	  dotest taginfo-newfmt-init-7 \
"$testcvs -q up -prtaginfo-start taginfo >taginfo"
	  echo "ALL ${TESTDIR}/1/loggit %{t} %b %{o} %p %{sTVv}" >>taginfo
	  echo "UseNewInfoFmtStrings=yes" >>config
	  dotest taginfo-newfmt-7 "$testcvs -q ci -m check-in-taginfo" \
"$TESTDIR/cvsroot/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$TESTDIR/cvsroot/CVSROOT/taginfo,v  <--  taginfo
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database" \
"$TESTDIR/cvsroot/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$TESTDIR/cvsroot/CVSROOT/taginfo,v  <--  taginfo
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database
$SPROG commit: warning:  Set to use deprecated info format strings\.  Establish
compatibility with the new info file format strings (add a temporary '1' in
all info files after each '%' which doesn't represent a literal percent)
and set UseNewInfoFmtStrings=yes in CVSROOT/config\.  After that, convert
individual command lines and scripts to handle the new format at your
leisure\."

	  cd ../first-dir
	  dotest taginfo-newfmt-8 "${testcvs} -q tag tag1" ""
	  mkdir sdir
	  dotest taginfo-newfmt-8b "${testcvs} -q add sdir" \
"Directory ${TESTDIR}/cvsroot/first-dir/sdir added to the repository"
	  touch sdir/file3
	  dotest taginfo-newfmt-8c "${testcvs} -q add sdir/file3" \
"${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest taginfo-newfmt-8d "${testcvs} -q ci -m added-sdir" \
"${TESTDIR}/cvsroot/first-dir/sdir/file3,v  <--  sdir/file3
initial revision: 1\.1"
	  dotest taginfo-newfmt-9 "${testcvs} -q tag -b br" \
"T file 2
W file1 : br already exists on branch 1\.1\.2\.1 : NOT MOVING tag to branch 1\.1\.0\.4
T sdir/file3"
	  dotest taginfo-newfmt-10 "${testcvs} -q update -r br" "[UP] file1"
	  echo add more text on branch >>file1
	  dotest taginfo-newfmt-11 "${testcvs} -q ci -m modify-on-br" \
"${TESTDIR}/cvsroot/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.2; previous revision: 1\.1\.2\.1"
	  dotest taginfo-newfmt-12 "${testcvs} -q tag -F -c brtag" \
"T file 2
T file1
T sdir/file3"

	  # we are being called once for each directory.  I'm not sure
	  # I like this, but I'm also not sure how hard it would be to change,
	  # It seems like it would be more trouble than it is really worth
	  # to let a partial tag go through...
	  dotest_fail taginfo-newfmt-13 "${testcvs} -q tag rejectme" \
"${SPROG} tag: Pre-tag check failed
${SPROG} tag: Pre-tag check failed
${SPROG} \[tag aborted\]: correct the above errors first!"

	  # When we are using taginfo to allow/disallow, it would be
	  # convenient to be able to use "cvs -n tag" to test whether
	  # the allow/disallow functionality is working as expected.
	  # see the comment before taginfo-newfmt-15 for notes on
	  # pretag and posttag proc
	  dotest taginfo-newfmt-14 "${testcvs} -nq tag rejectme" \
"T file 2
T file1
T sdir/file3"

	  # But when taginfo is used for logging, it is a pain for -n
	  # to call taginfo, since taginfo doesn't know whether -n was
	  # specified or not. (this could be fixed pretty easily now
	  # with a new fmt string.  i suppose it would be better to
	  # have a pretag proc and a posttag proc, though.)
	  dotest taginfo-newfmt-15 "${testcvs} -nq tag would-be-tag" \
"T file 2
T file1
T sdir/file3"

	  # Deleting: the cases are basically either the tag existed,
	  # or it didn't exist.
	  dotest taginfo-newfmt-16 "${testcvs} -q tag -d tag1" \
"D file 2
D file1"
	  dotest taginfo-newfmt-17 "${testcvs} -q tag -d tag1" ""

	  # Likewise with rtag.
	  dotest taginfo-newfmt-18 "${testcvs} -q rtag tag1 first-dir" ""
	  dotest taginfo-newfmt-19 "${testcvs} -q rtag -d tag1 first-dir" ""
	  dotest taginfo-newfmt-20 "${testcvs} -q rtag -d tag1 first-dir" ""

	  # The "br" example should be passing 1.1.2 or 1.1.0.2.
	  # But it turns out that is very hard to implement, since
	  # check_fileproc doesn't know what branch number it will
	  # get.  Probably the whole thing should be re-architected
	  # so that taginfo only allows/denies tagging, and a new
	  # hook, which is done from tag_fileproc, does logging.
	  # That would solve this, some more subtle races, and also
	  # the fact that it is nice for users to run "-n tag foo" to
	  # see whether a tag would be allowed.  Failing that,
	  # I suppose passing "1.1.branch" or "branch" for "br"
	  # would be an improvement.
	  dotest taginfo-newfmt-examine-2 "cat ${TESTDIR}/1/taglog" \
"tag1 N add first-dir
br T add first-dir file 2  NONE 1\.1
br T add first-dir/sdir file3  NONE 1\.1
brtag N mov first-dir file 2 br NONE 1\.1 file1 br 1\.1\.2\.1 1\.1\.2\.2
brtag N mov first-dir/sdir file3 br NONE 1\.1
tag1 ? del first-dir file 2 br 1\.1 1\.1 file1 br 1\.1 1\.1
tag1 ? del first-dir/sdir
tag1 ? del first-dir
tag1 ? del first-dir/sdir
tag1 N add first-dir file 2  NONE 1\.1 file1  NONE 1\.1
tag1 N add first-dir/sdir file3  NONE 1\.1
tag1 ? del first-dir file 2  1\.1 1\.1 file1  1\.1 1\.1
tag1 ? del first-dir/sdir file3  1\.1 1\.1
tag1 ? del first-dir
tag1 ? del first-dir/sdir"

	  dokeep
	  restore_adm
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	posttag)
	  # Tests of the CVSROOT/taginfo file.  See the comment at the
	  # "info" tests for a full list of administrative file tests.

	  mkdir 1; cd 1

	  dotest posttag-init-1 "$testcvs -q co CVSROOT" "U CVSROOT/$DOTSTAR"

	  # now that we've tested the default operation, try a new
	  # style fmt string.
	  cd CVSROOT
	  echo "ALL $TESTDIR/1/loggit %r %t %o %b %p %{sVv}" >posttag
	  dotest posttag-init-2 "$testcvs -q ci -m check-in-taginfo" \
"$TESTDIR/cvsroot/CVSROOT/posttag,v  <--  posttag
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  cd ..

	  cat >$TESTDIR/1/loggit <<EOF
#!$TESTSHELL
if test "\$1" = rejectme; then
    error=:
else
    error=false
fi

while [ -n "\$1" ]; do
    echo "\$1" >>$TESTDIR/1/taglog
    shift
done

if \$error; then
  exit 1
fi
exit 0
EOF
	  # #^@&!^@ Cygwin.
	  if test -n "$remotehost"; then
	    $CVS_RSH $remotehost "chmod +x $TESTDIR/1/loggit"
	  else
	    chmod +x $TESTDIR/1/loggit
	  fi

	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  dotest posttag-init-3 "$testcvs -q co first-dir"

	  cd first-dir
	  echo first >file1
	  echo "bull pucky" >'file 2'
	  dotest posttag-init-4 "$testcvs add file1 'file 2'" \
"$SPROG add: scheduling file \`file1' for addition
$SPROG add: scheduling file \`file 2' for addition
$SPROG add: use \`$SPROG commit' to add these files permanently"
	  dotest posttag-init-5 "$testcvs -q ci -m add-it" \
"$CVSROOT_DIRNAME/first-dir/file 2,v  <--  file 2
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"

	  dotest posttag-1 "$testcvs -q tag tag1" \
"T file 2
T file1"
	  dotest posttag-2 "$testcvs -q tag tag3" \
"T file 2
T file1"

	  dotest posttag-3 "$testcvs -q tag rejectme" \
"T file 2
T file1"

	  dotest posttag-4 "$testcvs -q tag -d rejectme" \
"D file 2
D file1"

	  dotest posttag-examine-1 "cat $TESTDIR/1/taglog" \
"$TESTDIR/cvsroot
tag1
add
N
first-dir
file 2
NONE
1\.1
file1
NONE
1\.1
$TESTDIR/cvsroot
tag3
add
N
first-dir
file 2
NONE
1\.1
file1
NONE
1\.1
$TESTDIR/cvsroot
rejectme
add
N
first-dir
file 2
NONE
1.1
file1
NONE
1.1
$TESTDIR/cvsroot
rejectme
del
?
first-dir
file 2
1.1
1.1
file1
1.1
1.1"

	  dokeep
	  cd ../..
	  restore_adm
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	config)
	  # Tests of the CVSROOT/config file.  See the comment at the
	  # "info" tests for a full list of administrative file tests.

	  # See note in keywordexpand about config errors from a proxied
	  # primary.
	  if $noredirect; then
	    notnoredirect config
	    continue
	  fi

	  # On Windows, we can't check out CVSROOT, because the case
	  # insensitivity means that this conflicts with cvsroot.
	  mkdir wnt
	  cd wnt

	  dotest config-init-1 "$testcvs -q co CVSROOT" "U CVSROOT/$DOTSTAR"
	  cd CVSROOT
	  dotest config-init-2 "$testcvs -Q tag config-start"
	  echo 'bogus line' >>config
	  dotest config-3 "$testcvs -q ci -m change-to-bogus-line" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  dotest config-3a "$testcvs -Q update -jHEAD -jconfig-start" \
"$SPROG [a-z]*: $SECONDARY_CVSROOT_DIRNAME/CVSROOT/config \[[1-9][0-9]*\]: syntax error: missing \`=' between keyword and value
RCS file: $CVSROOT_DIRNAME/CVSROOT/config,v
retrieving revision 1.[0-9]*
retrieving revision 1.[0-9]*
Merging differences between 1.[0-9]* and 1.[0-9]* into config"
	  echo 'BogusOption=yes' >>config
	  if $proxy; then
	    dotest config-4p "$testcvs -q ci -m change-to-bogus-opt" \
"$SPROG [a-z]*: $SECONDARY_CVSROOT_DIRNAME/CVSROOT/config \[[1-9][0-9]*\]: syntax error: missing \`=' between keyword and value
$SPROG [a-z]*: $CVSROOT_DIRNAME/CVSROOT/config \[[1-9][0-9]*\]: syntax error: missing \`=' between keyword and value
$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  else
	    dotest config-4 "$testcvs -q ci -m change-to-bogus-opt" \
"$SPROG [a-z]*: $SECONDARY_CVSROOT_DIRNAME/CVSROOT/config \[[1-9][0-9]*\]: syntax error: missing \`=' between keyword and value
$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  fi

	  if $proxy; then
	    : # FIXME: don't try in proxy mode
	  else
	    # Now test the HistoryLogPath and HistorySearchPath options.
	    mkdir $TESTDIR/historylogs
	    echo >config \
	         'HistoryLogPath=$CVSROOT/../historylogs/%Y-%m-%d-%H-%M-%S'
	    echo 'HistorySearchPath=$CVSROOT/../historylogs/*' >>config

	    # The warning is left over from the previous test.
	    dotest config-5 "$testcvs -q ci -m set-HistoryLogPath" \
"$SPROG [a-z]*: $CVSROOT_DIRNAME/CVSROOT/config \[[1-9][0-9]*\]: unrecognized keyword \`BogusOption'
$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	    echo '# noop' >> config
	    dotest config-6 "$testcvs -q ci -mlog-commit" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	    echo '# noop' >> config
	    dotest config-7 "$testcvs -q ci -mlog-commit" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	    # The log entry was intentionally split across multiple files.
	    dotest config-8 "ls -l $TESTDIR/historylogs/*" \
"-rw-rw-r--.*$TESTDIR/historylogs/2[0-9][0-9][0-9]-[01][0-9]-[0-3][0-9]-[0-2][0-9]-[0-5][0-9]-[0-5][0-9]
-rw-rw-r--.*$TESTDIR/historylogs/2[0-9][0-9][0-9]-[01][0-9]-[0-3][0-9]-[0-2][0-9]-[0-5][0-9]-[0-5][0-9]"

	    # Should still see both commits.
	    if $remote; then
	      dotest config-9r "$testcvs history -ea" \
"M [0-9-]* [0-9:]* ${PLUS}0000 $username 1\.[0-9]* config CVSROOT == <remote>
M [0-9-]* [0-9:]* ${PLUS}0000 $username 1\.[0-9]* config CVSROOT == <remote>"
	    else
	      dotest config-9 "$testcvs history -ea" \
"M [0-9-]* [0-9:]* ${PLUS}0000 $username 1\.[0-9]* config CVSROOT == $TESTDIR/wnt/CVSROOT
M [0-9-]* [0-9:]* ${PLUS}0000 $username 1\.[0-9]* config CVSROOT == $TESTDIR/wnt/CVSROOT"
	    fi

	    # Remove this now to see what kind of error messages we get.
	    rm -r $TESTDIR/historylogs
	  fi

	  dokeep
	  restore_adm
	  cd ../..
	  rm -r wnt
	  ;;



	config2)
	  # Tests of the CVSROOT/config file.  See the comment at the
	  # "info" tests for a full list of administrative file tests.

	  # No point in testing compression effects in local mode.
          if $remote; then :; else
            remoteonly config2
	    continue
	  fi

	  # On Windows, we can't check out CVSROOT, because the case
	  # insensitivity means that this conflicts with cvsroot.
	  mkdir wnt
	  cd wnt

	  # Set MinCompressionLevel and MaxCompressionLevel in config.
	  dotest config2-init-1 "$testcvs -q co CVSROOT" "U CVSROOT/$DOTSTAR"
	  dotest config2-init-1b "$testcvs -Q tag initial"
	  cd CVSROOT
	  cat << EOF >> config
MinCompressionLevel=5
MaxCompressionLevel=6
EOF
	  dotest config2-init-2 \
"$testcvs -q ci -m set-compression-constraints" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	  # Verify that the server reports forcing compression to an allowed
	  # level.

	  # Too high.
	  dotest config2-1 "$testcvs -z9 update" \
"$SPROG server: Forcing compression level 6 (allowed: 5 <= z <= 6)\.
$SPROG update: Updating \."
	  # Too low.
	  dotest config2-2 "$testcvs -z1 update" \
"$SPROG server: Forcing compression level 5 (allowed: 5 <= z <= 6)\.
$SPROG update: Updating \."
	  # From zero.
	  dotest config2-3 "$testcvs update" \
"$SPROG server: Forcing compression level 5 (allowed: 5 <= z <= 6)\.
$SPROG update: Updating \."
	  # Just right.
	  dotest config2-3 "$testcvs -z5 update" \
"$SPROG update: Updating \."

	  # Check that compression may be forced to 0.
	  dotest config2-init-2b "$testcvs -z5 up -jHEAD -jinitial" "$DOTSTAR"
	  cat << EOF >> config
MaxCompressionLevel=0
EOF
	  dotest config2-init-3 "$testcvs -qz5 ci -m no-compression" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	  # Too high.
	  dotest config2-5 "$testcvs -z9 update" \
"$SPROG server: Forcing compression level 0 (allowed: 0 <= z <= 0)\.
$SPROG update: Updating \."
	  # Just right.
	  dotest config2-6 "$testcvs update" \
"$SPROG update: Updating \."

	  # And verify effect without restrictions.
	  dotest config2-init-3b "$testcvs up -jHEAD -jinitial" "$DOTSTAR"
	  dotest config2-init-4 "$testcvs -q ci -m change-to-comment" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  dotest config2-7 "$testcvs update" \
"$SPROG update: Updating \."

	  dokeep
	  restore_adm
	  cd ../..
	  rm -r wnt
	  ;;

	config3)
	  # Verify comments, white space, & [rootspecs] in CVSROOT/config
	  #
	  # `cvs server' `-c' option tested in `server' test
	  modify_repo mkdir $CVSROOT_DIRNAME/config3
	  mkdir config3
	  cd config3

	  dotest config3-init-1 "$testcvs -q co CVSROOT" "U CVSROOT/$DOTSTAR"
	  cd CVSROOT

	  # I break the usual sanity.sh indentation standard for here-docs
	  # mostly to test that leading white-space is now ignored.
	  dotest config3-init-1b "$testcvs -Q tag initial-config"

	  cat <<EOF >>config
	      # Ignore a comment with leading spaces.
	      GLOBAL-BAD-OPTION=WWW
 
	      [/ignore/this/root]
	      [/and/this/one]
		  IGNORED-BAD-OPTION=YYY
EOF
	  dotest config3-init-2 \
"$testcvs -q ci -m test-root-specs" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	  cd ..
	  dotest config3-1 "$testcvs co config3" \
"$SPROG [a-z]*: $SECONDARY_CVSROOT_DIRNAME/CVSROOT/config \[[0-9]*\]: unrecognized keyword \`GLOBAL-BAD-OPTION'
$SPROG checkout: Updating config3"

	  cd CVSROOT
	  dotest config3-init-2a "$testcvs -Q up -jHEAD -jinitial-config" \
"$DOTSTAR
Merging differences between 1\.[0-9]* and 1\.[0-9]* into config"

	  cat <<EOF >>config
	      # Ignore a comment with leading spaces.

	      [/ignore/this/root]
	      [/and/this/one]
		  IGNORED-BAD-OPTION=YYY
		  # Ignore a comment with leading spaces.

	      [/some/other/root]

	      # Comments and blank lines do not affect fall-through behavior.

	      [$CVSROOT_DIRNAME]
	      [$SECONDARY_CVSROOT_DIRNAME]

	      # Comments and blank lines do not affect fall-through behavior.

	      [/yet/another/root]
		  # Ignore a comment with leading spaces.
		  PROCESS-BAD-OPTION=XXX
EOF
	  dotest config3-init-3 \
"$testcvs -q ci -m test-root-specs" \
"$SPROG [a-z]*: $CVSROOT_DIRNAME/CVSROOT/config \[[0-9]*\]: unrecognized keyword \`GLOBAL-BAD-OPTION'
$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database" \
"$SPROG [a-z]*: $SECONDARY_CVSROOT_DIRNAME/CVSROOT/config \[[0-9]*\]: unrecognized keyword \`GLOBAL-BAD-OPTION'
$SPROG [a-z]*: $CVSROOT_DIRNAME/CVSROOT/config \[[0-9]*\]: unrecognized keyword \`GLOBAL-BAD-OPTION'
$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	  cd ..
	  dotest config3-2 "$testcvs co config3" \
"$SPROG [a-z]*: $SECONDARY_CVSROOT_DIRNAME/CVSROOT/config \[[0-9]*\]: unrecognized keyword \`PROCESS-BAD-OPTION'
$SPROG checkout: Updating config3"

	  # The next few tests make sure both global options and root
	  # specific options are processed by setting the history log and
	  # search paths in different locations and then verifying that
	  # both registered.  It also verifies that a key for a different
	  # root is ignored.
	  cd CVSROOT
	  dotest config3-init-3a "$testcvs -Q up -jHEAD -jinitial-config" \
"$DOTSTAR
Merging differences between 1\.[0-9]* and 1\.[0-9]* into config"

	  cat <<EOF >>config
	      HistoryLogPath=$TESTDIR/historylog

	      [/ignore/this/root]
	      [/and/this/one]
		  IGNORED-BAD-OPTION=YYY

	      [/some/other/root]
	      [$CVSROOT_DIRNAME]
	      [$SECONDARY_CVSROOT_DIRNAME]
	      [/yet/another/root]
		  HistorySearchPath=$TESTDIR/historylog

	      [/ignore/another/root]
	      [/and/this/one/too]
		  ANOTHER-IGNORED-BAD-OPTION=ZZZ

	      [$CVSROOT_DIRNAME]
	      [$SECONDARY_CVSROOT_DIRNAME]
		  LogHistory=TMAR
EOF
	  dotest config3-init-4 \
"$testcvs -q ci -m test-root-specs" \
"$SPROG [a-z]*: $CVSROOT_DIRNAME/CVSROOT/config \[[0-9]*\]: unrecognized keyword \`PROCESS-BAD-OPTION'
$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database" \
"$SPROG [a-z]*: $SECONDARY_CVSROOT_DIRNAME/CVSROOT/config \[[0-9]*\]: unrecognized keyword \`PROCESS-BAD-OPTION'
$SPROG [a-z]*: $CVSROOT_DIRNAME/CVSROOT/config \[[0-9]*\]: unrecognized keyword \`PROCESS-BAD-OPTION'
$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	  cd ..
	  dotest config3-3 "$testcvs co -d config3-2 config3" \
"$SPROG checkout: Updating config3-2"

	  cd config3-2
	  touch newfile
	  dotest config3-4 "$testcvs -Q add newfile"
	  dotest config3-5 "$testcvs -q ci -madd-file" \
"$CVSROOT_DIRNAME/config3/newfile,v  <--  newfile
initial revision: 1\.1"

	  dotest config3-6 "$testcvs rtag testtag config3" \
"$SPROG rtag: Tagging config3"

	  cd ..
	  dotest config3-7 "$testcvs history -ea" \
"A [0-9-]* [0-9:]* ${PLUS}0000 $username 1\.1 newfile config3 == [-_/a-zA-Z0-9<>]*
T [0-9-]* [0-9:]* ${PLUS}0000 $username config3 \[testtag:A\]"

	  dokeep
	  restore_adm
	  cd ..
	  rm -r config3
	  modify_repo rm -rf $CVSROOT_DIRNAME/config3
	  ;;



	config4)
	  # TmpDir
	  mkdir config4
	  cd config4

	  dotest config4-init-1 "$testcvs -q co CVSROOT" "U CVSROOT/$DOTSTAR"
	  cd CVSROOT
	  mkdir $TESTDIR/config4/tmp
	  echo "TmpDir=$TESTDIR/config4/tmp" >>config
	  echo "DEFAULT $TESTDIR/config4/verify %l" >>verifymsg
	  dotest config4-init-2 "$testcvs -q ci -m change-tmpdir" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$CVSROOT_DIRNAME/CVSROOT/verifymsg,v  <--  verifymsg
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	  cat >$TESTDIR/config4/verify <<EOF
#! /bin/sh
echo \$1
exit 0
EOF
	  chmod a+x $TESTDIR/config4/verify
	  dotest config4-1 \
"$testcvs -q ci -fmtest-tmpdir config" \
"$TESTDIR/config4/tmp/$tempfile
$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	  dokeep
	  restore_adm
	  cd ../..
	  rm -r config4
	  modify_repo rm -rf $CVSROOT_DIRNAME/config4
	  ;;



	serverpatch)
	  # Test remote CVS handling of unpatchable files.  This isn't
	  # much of a test for local CVS.
	  # We test this with some keyword expansion games, but the situation
	  # also arises if the user modifies the file while CVS is running.
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  mkdir 1
	  cd 1
	  dotest serverpatch-1 "$testcvs -q co first-dir"

	  cd first-dir

	  # Add a file with an RCS keyword.
	  echo '$''Name$' > file1
	  echo '1' >> file1
	  dotest serverpatch-2 "$testcvs add file1" \
"$SPROG add: scheduling file \`file1' for addition
$SPROG add: use \`$SPROG commit' to add this file permanently"

	  dotest serverpatch-3 "${testcvs} -q commit -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"

	  # Tag the file.
	  dotest serverpatch-4 "${testcvs} -q tag tag file1" 'T file1'

	  # Check out a tagged copy of the file.
	  cd ../..
	  mkdir 2
	  cd 2
	  dotest serverpatch-5 "${testcvs} -q co -r tag first-dir" \
'U first-dir/file1'

	  # Remove the tag.  This will leave the tag string in the
	  # expansion of the Name keyword.
	  dotest serverpatch-6 "${testcvs} -q update -A first-dir" ''

	  # Modify and check in the first copy.
	  cd ../1/first-dir
	  echo '2' >> file1
	  dotest serverpatch-7 "${testcvs} -q ci -mx file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1"

	  # Now update the second copy.  When using remote CVS, the
	  # patch will fail, forcing the file to be refetched.
	  cd ../../2/first-dir
	  dotest serverpatch-8 "${testcvs} -q update" \
'U file1' \
"P file1
${CPROG} update: checksum failure after patch to \./file1; will refetch
${CPROG} client: refetching unpatchable files
$SPROG update: warning: \`file1' was lost
U file1"

	  dokeep
	  cd ../..
	  rm -r 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	log)
	  # Test selecting revisions with cvs log.
	  # See also log2 tests for more tests.
	  # See also branches-14.3 for logging with a branch off of a branch.
	  # See also multibranch-14 for logging with several branches off the
	  #   same branchpoint.
	  # Tests of each option to cvs log:
	  #   -h: admin-19a-log
	  #   -N: log, log2, admin-19a-log
	  #   -b, -r: log
	  #   -d: logopt, rcs
	  #   -s: logopt, rcs3
	  #   -R: logopt, rcs3
	  #   -w, -t: not tested yet (TODO)

	  # Check in a file with a few revisions and branches.
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  dotest log-1 "$testcvs -q co first-dir"
	  cd first-dir
	  echo 'first revision' > file1
	  echo 'first revision' > file2
	  dotest log-2 "${testcvs} add file1 file2" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: scheduling file .file2. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"

	  # While we're at it, check multi-line comments, input from file,
	  # and trailing whitespace trimming
	  echo 'line 1     '	 >${TESTDIR}/comment.tmp
	  echo '     '		>>${TESTDIR}/comment.tmp
	  echo 'line 2	'	>>${TESTDIR}/comment.tmp
	  echo '	'	>>${TESTDIR}/comment.tmp
	  echo '  	  '	>>${TESTDIR}/comment.tmp
	  dotest log-3 "${testcvs} -q commit -F ${TESTDIR}/comment.tmp" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.1"
	  rm -f ${TESTDIR}/comment.tmp

	  echo 'second revision' > file1
	  echo 'second revision' > file2
	  dotest log-4 "${testcvs} -q ci -m2 file1 file2" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.2; previous revision: 1\.1"

	  dotest log-5 "${testcvs} -q tag -b branch file1" 'T file1'
	  dotest log-5a "${testcvs} -q tag tag1 file2" 'T file2'

	  echo 'third revision' > file1
	  echo 'third revision' > file2
	  dotest log-6 "${testcvs} -q ci -m3 file1 file2" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.3; previous revision: 1\.2
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.3; previous revision: 1\.2"

	  dotest log-6a "${testcvs} -q tag tag2 file2" 'T file2'

	  dotest log-7 "${testcvs} -q update -r branch" \
"[UP] file1
${SPROG} update: \`file2' is no longer in the repository"

	  echo 'first branch revision' > file1
	  dotest log-8 "${testcvs} -q ci -m1b file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2\.2\.1; previous revision: 1\.2"

	  dotest log-9 "${testcvs} -q tag tag file1" 'T file1'

	  echo 'second branch revision' > file1
	  dotest log-10 "${testcvs} -q ci -m2b file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2\.2\.2; previous revision: 1\.2\.2\.1"

	  # Set up a bunch of shell variables to make the later tests
	  # easier to describe.=
	  log_header1="
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.3
branch:
locks: strict
access list:"
	  rlog_header1="
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
head: 1\.3
branch:
locks: strict
access list:"
	  log_tags1='symbolic names:
	tag: 1\.2\.2\.1
	branch: 1\.2\.0\.2'
	  log_keyword='keyword substitution: kv'
	  log_dash='----------------------------
revision'
	  log_date="date: ${ISO8601DATE};  author: ${username};  state: Exp;"
	  log_lines="  lines: ${PLUS}1 -1;"
	  log_commitid="  commitid: ${commitid};"
	  log_rev1="${log_dash} 1\.1
${log_date}${log_commitid}
line 1

line 2"
	  log_rev2="${log_dash} 1\.2
${log_date}${log_lines}${log_commitid}
branches:  1\.2\.2;
2"
	  log_rev3="${log_dash} 1\.3
${log_date}${log_lines}${log_commitid}
3"
	  log_rev1b="${log_dash} 1\.2\.2\.1
${log_date}${log_lines}${log_commitid}
1b"
	  log_rev2b="${log_dash} 1\.2\.2\.2
${log_date}${log_lines}${log_commitid}
2b"
	  log_trailer='============================================================================='

	  # Now, finally, test the log output.

	  dotest log-11 "${testcvs} log file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 5
description:
${log_rev3}
${log_rev2}
${log_rev1}
${log_rev2b}
${log_rev1b}
${log_trailer}"

	  dotest log-12 "${testcvs} log -N file1" \
"${log_header1}
${log_keyword}
total revisions: 5;	selected revisions: 5
description:
${log_rev3}
${log_rev2}
${log_rev1}
${log_rev2b}
${log_rev1b}
${log_trailer}"

	  dotest log-13 "${testcvs} log -b file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 3
description:
${log_rev3}
${log_rev2}
${log_rev1}
${log_trailer}"

	  dotest log-14 "${testcvs} log -r file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev3}
${log_trailer}"

	  dotest log-14a "${testcvs} log -rHEAD file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev3}
${log_trailer}"

	  # The user might not realize that "-r" must not take a space.
	  # In the error message, HEAD is a file name, not a tag name (which
	  # might be confusing itself).
	  dotest_fail log-14b "${testcvs} log -r HEAD file1" \
"${SPROG} log: nothing known about HEAD
${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev3}
${log_trailer}"

#	  Check that unusual syntax works correctly.

	  dotest log-14c "${testcvs} log -r: file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev3}
${log_trailer}"
	  dotest log-14d "${testcvs} log -r, file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev3}
${log_trailer}"
	  dotest log-14e "${testcvs} log -r. file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev3}
${log_trailer}"
	  dotest log-14f "${testcvs} log -r:: file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 0
description:
${log_trailer}"

	  dotest log-15 "${testcvs} log -r1.2 file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev2}
${log_trailer}"

	  dotest log-16 "${testcvs} log -r1.2.2 file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 2
description:
${log_rev2b}
${log_rev1b}
${log_trailer}"

	  # This test would fail with the old invocation of rlog, but it
	  # works with the builtin log support.
	  dotest log-17 "${testcvs} log -rbranch file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 2
description:
${log_rev2b}
${log_rev1b}
${log_trailer}"

	  dotest log-18 "${testcvs} log -r1.2.2. file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev2b}
${log_trailer}"

	  # Multiple -r options are undocumented; see comments in
	  # cvs.texinfo about whether they should be deprecated.
	  dotest log-18a "${testcvs} log -r1.2.2.2 -r1.3:1.3 file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 2
description:
${log_rev3}
${log_rev2b}
${log_trailer}"

	  # This test would fail with the old invocation of rlog, but it
	  # works with the builtin log support.
	  dotest log-19 "${testcvs} log -rbranch. file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev2b}
${log_trailer}"

	  dotest log-20 "${testcvs} log -r1.2: file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 2
description:
${log_rev3}
${log_rev2}
${log_trailer}"

	  dotest log-20a "${testcvs} log -r1.2:: file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev3}
${log_trailer}"

	  dotest log-21 "${testcvs} log -r:1.2 file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 2
description:
${log_rev2}
${log_rev1}
${log_trailer}"

	  dotest log-21a "${testcvs} log -r::1.2 file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 2
description:
${log_rev2}
${log_rev1}
${log_trailer}"

	  dotest log-22 "${testcvs} log -r1.1:1.2 file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 2
description:
${log_rev2}
${log_rev1}
${log_trailer}"

	  dotest log-22a "${testcvs} log -r1.1::1.2 file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev2}
${log_trailer}"

	  dotest log-22b "${testcvs} log -r1.1::1.3 file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 2
description:
${log_rev3}
${log_rev2}
${log_trailer}"

	  dotest log-23 "${testcvs} log -rfoo:: file1" \
"${SPROG} log: warning: no revision .foo. in .${CVSROOT_DIRNAME}/first-dir/file1,v.
${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 0
description:
${log_trailer}"

	  dotest log-24 "${testcvs} log -rfoo::1.3 file1" \
"${SPROG} log: warning: no revision .foo. in .${CVSROOT_DIRNAME}/first-dir/file1,v.
${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 0
description:
${log_trailer}"

	  dotest log-25 "${testcvs} log -r::foo file1" \
"${SPROG} log: warning: no revision .foo. in .${CVSROOT_DIRNAME}/first-dir/file1,v.
${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 0
description:
${log_trailer}"

	  dotest log-26 "${testcvs} log -r1.1::foo file1" \
"${SPROG} log: warning: no revision .foo. in .${CVSROOT_DIRNAME}/first-dir/file1,v.
${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 0
description:
${log_trailer}"

	  # Test BASE pseudotag
	  dotest log-27 "${testcvs} log -rBASE file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev2b}
${log_trailer}"

	  dotest log-28 "${testcvs} -q up -r1.2 file1" "[UP] file1"
	  dotest log-29 "${testcvs} log -rBASE file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev2}
${log_trailer}"

	  dotest log-30 "${testcvs} -q up -rbranch file1" "[UP] file1"

	  # Now the same tests but with rlog

	  dotest log-r11 "${testcvs} rlog first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 5
description:
${log_rev3}
${log_rev2}
${log_rev1}
${log_rev2b}
${log_rev1b}
${log_trailer}"

	  dotest log-r12 "${testcvs} rlog -N first-dir/file1" \
"${rlog_header1}
${log_keyword}
total revisions: 5;	selected revisions: 5
description:
${log_rev3}
${log_rev2}
${log_rev1}
${log_rev2b}
${log_rev1b}
${log_trailer}"

	  dotest log-r13 "${testcvs} rlog -b first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 3
description:
${log_rev3}
${log_rev2}
${log_rev1}
${log_trailer}"

	  dotest log-r14 "${testcvs} rlog -r first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev3}
${log_trailer}"

	  dotest log-r14a "${testcvs} rlog -rHEAD first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev3}
${log_trailer}"

	  dotest_fail log-r14b "${testcvs} rlog -r HEAD first-dir/file1" \
"${SPROG} rlog: cannot find module .HEAD. - ignored
${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev3}
${log_trailer}"

	  dotest log-r14c "${testcvs} rlog -r: first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev3}
${log_trailer}"
	  dotest log-r14d "${testcvs} rlog -r, first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev3}
${log_trailer}"
	  dotest log-r14e "${testcvs} rlog -r. first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev3}
${log_trailer}"
	  dotest log-r14f "${testcvs} rlog -r:: first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 0
description:
${log_trailer}"

	  dotest log-r15 "${testcvs} rlog -r1.2 first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev2}
${log_trailer}"

	  dotest log-r16 "${testcvs} rlog -r1.2.2 first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 2
description:
${log_rev2b}
${log_rev1b}
${log_trailer}"

	  dotest log-r17 "${testcvs} rlog -rbranch first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 2
description:
${log_rev2b}
${log_rev1b}
${log_trailer}"

	  dotest log-r18 "${testcvs} rlog -r1.2.2. first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev2b}
${log_trailer}"

	  dotest log-r18a "${testcvs} rlog -r1.2.2.2 -r1.3:1.3 first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 2
description:
${log_rev3}
${log_rev2b}
${log_trailer}"

	  dotest log-r19 "${testcvs} rlog -rbranch. first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev2b}
${log_trailer}"

	  dotest log-r20 "${testcvs} rlog -r1.2: first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 2
description:
${log_rev3}
${log_rev2}
${log_trailer}"

	  dotest log-r20a "${testcvs} rlog -r1.2:: first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev3}
${log_trailer}"

	  dotest log-r21 "${testcvs} rlog -r:1.2 first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 2
description:
${log_rev2}
${log_rev1}
${log_trailer}"

	  dotest log-r21a "${testcvs} rlog -r::1.2 first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 2
description:
${log_rev2}
${log_rev1}
${log_trailer}"

	  dotest log-r22 "${testcvs} rlog -r1.1:1.2 first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 2
description:
${log_rev2}
${log_rev1}
${log_trailer}"

	  dotest log-r22a "${testcvs} rlog -r1.1::1.2 first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 1
description:
${log_rev2}
${log_trailer}"

	  dotest log-r22b "${testcvs} rlog -r1.1::1.3 first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 2
description:
${log_rev3}
${log_rev2}
${log_trailer}"

	  dotest log-r23 "${testcvs} rlog -rfoo:: first-dir/file1" \
"${SPROG} rlog: warning: no revision .foo. in .${CVSROOT_DIRNAME}/first-dir/file1,v.
${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 0
description:
${log_trailer}"

	  dotest log-r24 "${testcvs} rlog -rfoo::1.3 first-dir/file1" \
"${SPROG} rlog: warning: no revision .foo. in .${CVSROOT_DIRNAME}/first-dir/file1,v.
${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 0
description:
${log_trailer}"

	  dotest log-r25 "${testcvs} rlog -r::foo first-dir/file1" \
"${SPROG} rlog: warning: no revision .foo. in .${CVSROOT_DIRNAME}/first-dir/file1,v.
${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 0
description:
${log_trailer}"

	  dotest log-r26 "${testcvs} rlog -r1.1::foo first-dir/file1" \
"${SPROG} rlog: warning: no revision .foo. in .${CVSROOT_DIRNAME}/first-dir/file1,v.
${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 0
description:
${log_trailer}"

	  # Test BASE pseudotag
	  dotest log-r27 "${testcvs} rlog -rBASE first-dir/file1" \
"${SPROG} rlog: warning: no revision .BASE. in .${CVSROOT_DIRNAME}/first-dir/file1,v.
${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 0
description:
${log_trailer}"

	  dotest log-r28 "${testcvs} -q up -r1.2 file1" "[UP] file1"
	  dotest log-r29 "${testcvs} rlog -rBASE first-dir/file1" \
"${SPROG} rlog: warning: no revision .BASE. in .${CVSROOT_DIRNAME}/first-dir/file1,v.
${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 0
description:
${log_trailer}"

	  # Test when head is dead

	  dotest log-d0 "${testcvs} -q up -A" \
"[UP] file1
U file2"
	  dotest log-d1 "${testcvs} -q rm -f file1" \
"${SPROG} remove: use .${SPROG} commit. to remove this file permanently"
	  dotest log-d2 "${testcvs} -q ci -m4" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: delete; previous revision: 1\.3"

	  log_header1="
RCS file: ${CVSROOT_DIRNAME}/first-dir/Attic/file1,v
Working file: file1
head: 1\.4
branch:
locks: strict
access list:"
	  rlog_header1="
RCS file: ${CVSROOT_DIRNAME}/first-dir/Attic/file1,v
head: 1\.4
branch:
locks: strict
access list:"
	  log_header2="
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
Working file: file2
head: 1\.3
branch:
locks: strict
access list:"
	  rlog_header2="
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
head: 1\.3
branch:
locks: strict
access list:"
	  log_tags2='symbolic names:
	tag2: 1\.3
	tag1: 1\.2'
	  log_rev4="${log_dash} 1\.4
date: ${ISO8601DATE};  author: ${username};  state: dead;  lines: ${PLUS}0 -0;  commitid: ${commitid};
4"
	  log_rev22="${log_dash} 1\.2
${log_date}${log_lines}${log_commitid}
2"

	  dotest log-d3 "${testcvs} log -rbranch file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 6;	selected revisions: 2
description:
${log_rev2b}
${log_rev1b}
${log_trailer}"
	  dotest log-rd3 "${testcvs} rlog -rbranch first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 6;	selected revisions: 2
description:
${log_rev2b}
${log_rev1b}
${log_trailer}"
	  dotest log-d4 "${testcvs} -q log -rbranch" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 6;	selected revisions: 2
description:
${log_rev2b}
${log_rev1b}
${log_trailer}
${SPROG} log: warning: no revision .branch. in .${CVSROOT_DIRNAME}/first-dir/file2,v.
${log_header2}
${log_tags2}
${log_keyword}
total revisions: 3;	selected revisions: 0
description:
${log_trailer}"
	  dotest log-d4a "${testcvs} -q log -t -rbranch" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 6
description:
${log_trailer}
${SPROG} log: warning: no revision .branch. in .${CVSROOT_DIRNAME}/first-dir/file2,v.
${log_header2}
${log_tags2}
${log_keyword}
total revisions: 3
description:
${log_trailer}"
	  dotest log-d4b "${testcvs} -q log -tS -rbranch" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 6;	selected revisions: 2
description:
${log_trailer}
${SPROG} log: warning: no revision .branch. in .${CVSROOT_DIRNAME}/first-dir/file2,v."
	  dotest log-d4c "${testcvs} -q log -h -rbranch" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 6
${log_trailer}
${SPROG} log: warning: no revision .branch. in .${CVSROOT_DIRNAME}/first-dir/file2,v.
${log_header2}
${log_tags2}
${log_keyword}
total revisions: 3
${log_trailer}"
	  dotest log-d4d "${testcvs} -q log -hS -rbranch" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 6;	selected revisions: 2
${log_trailer}
${SPROG} log: warning: no revision .branch. in .${CVSROOT_DIRNAME}/first-dir/file2,v."
	  dotest log-d4e "$testcvs -q log -R -rbranch" \
"$CVSROOT_DIRNAME/first-dir/Attic/file1,v
$CVSROOT_DIRNAME/first-dir/file2,v"
	  dotest log-d4f "${testcvs} -q log -R -S -rbranch" \
"${CVSROOT_DIRNAME}/first-dir/Attic/file1,v
${SPROG} log: warning: no revision .branch. in .${CVSROOT_DIRNAME}/first-dir/file2,v."
	  dotest log-rd4 "${testcvs} -q rlog -rbranch first-dir" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 6;	selected revisions: 2
description:
${log_rev2b}
${log_rev1b}
${log_trailer}
${SPROG} rlog: warning: no revision .branch. in .${CVSROOT_DIRNAME}/first-dir/file2,v.
${rlog_header2}
${log_tags2}
${log_keyword}
total revisions: 3;	selected revisions: 0
description:
${log_trailer}"
	  dotest log-rd4a "${testcvs} -q rlog -t -rbranch first-dir" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 6
description:
${log_trailer}
${SPROG} rlog: warning: no revision .branch. in .${CVSROOT_DIRNAME}/first-dir/file2,v.
${rlog_header2}
${log_tags2}
${log_keyword}
total revisions: 3
description:
${log_trailer}"
	  dotest log-rd4b "${testcvs} -q rlog -St -rbranch first-dir" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 6;	selected revisions: 2
description:
${log_trailer}
${SPROG} rlog: warning: no revision .branch. in .${CVSROOT_DIRNAME}/first-dir/file2,v."
	  dotest log-rd4c "${testcvs} -q rlog -h -rbranch first-dir" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 6
${log_trailer}
${SPROG} rlog: warning: no revision .branch. in .${CVSROOT_DIRNAME}/first-dir/file2,v.
${rlog_header2}
${log_tags2}
${log_keyword}
total revisions: 3
${log_trailer}"
	  dotest log-rd4d "${testcvs} -q rlog -Sh -rbranch first-dir" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 6;	selected revisions: 2
${log_trailer}
${SPROG} rlog: warning: no revision .branch. in .${CVSROOT_DIRNAME}/first-dir/file2,v."
	  dotest log-rd4e "${testcvs} -q rlog -R -rbranch first-dir" \
"${CVSROOT_DIRNAME}/first-dir/Attic/file1,v
${CVSROOT_DIRNAME}/first-dir/file2,v"
	  dotest log-rd4f "${testcvs} -q rlog -R -S -rbranch first-dir" \
"${CVSROOT_DIRNAME}/first-dir/Attic/file1,v
${SPROG} rlog: warning: no revision .branch. in .${CVSROOT_DIRNAME}/first-dir/file2,v."
	  dotest log-d5 "${testcvs} log -r1.2.2.1:1.2.2.2 file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 6;	selected revisions: 2
description:
${log_rev2b}
${log_rev1b}
${log_trailer}"
	  dotest log-rd5 "${testcvs} rlog -r1.2.2.1:1.2.2.2 first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 6;	selected revisions: 2
description:
${log_rev2b}
${log_rev1b}
${log_trailer}"
	  dotest log-d6 "${testcvs} -q log -r1.2.2.1:1.2.2.2" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 6;	selected revisions: 2
description:
${log_rev2b}
${log_rev1b}
${log_trailer}
${log_header2}
${log_tags2}
${log_keyword}
total revisions: 3;	selected revisions: 0
description:
${log_trailer}"
	  dotest log-rd6 "${testcvs} -q rlog -r1.2.2.1:1.2.2.2 first-dir" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 6;	selected revisions: 2
description:
${log_rev2b}
${log_rev1b}
${log_trailer}
${rlog_header2}
${log_tags2}
${log_keyword}
total revisions: 3;	selected revisions: 0
description:
${log_trailer}"
	  dotest log-d7 "${testcvs} log -r1.2:1.3 file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 6;	selected revisions: 2
description:
${log_rev3}
${log_rev2}
${log_trailer}"
	  dotest log-rd7 "${testcvs} -q rlog -r1.2:1.3 first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 6;	selected revisions: 2
description:
${log_rev3}
${log_rev2}
${log_trailer}"
	  dotest log-d8 "${testcvs} -q log -rtag1:tag2" \
"${SPROG} log: warning: no revision .tag1. in .${CVSROOT_DIRNAME}/first-dir/Attic/file1,v.
${SPROG} log: warning: no revision .tag2. in .${CVSROOT_DIRNAME}/first-dir/Attic/file1,v.
${log_header1}
${log_tags1}
${log_keyword}
total revisions: 6;	selected revisions: 0
description:
${log_trailer}
${log_header2}
${log_tags2}
${log_keyword}
total revisions: 3;	selected revisions: 2
description:
${log_rev3}
${log_rev22}
${log_trailer}"
	  dotest log-d8a "${testcvs} -q log -rtag1:tag2 -S" \
"${SPROG} log: warning: no revision .tag1. in .${CVSROOT_DIRNAME}/first-dir/Attic/file1,v.
${SPROG} log: warning: no revision .tag2. in .${CVSROOT_DIRNAME}/first-dir/Attic/file1,v.
${log_header2}
${log_tags2}
${log_keyword}
total revisions: 3;	selected revisions: 2
description:
${log_rev3}
${log_rev22}
${log_trailer}"
	  dotest log-rd8 "${testcvs} -q rlog -rtag1:tag2 first-dir" \
"${SPROG} rlog: warning: no revision .tag1. in .${CVSROOT_DIRNAME}/first-dir/Attic/file1,v.
${SPROG} rlog: warning: no revision .tag2. in .${CVSROOT_DIRNAME}/first-dir/Attic/file1,v.
${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 6;	selected revisions: 0
description:
${log_trailer}
${rlog_header2}
${log_tags2}
${log_keyword}
total revisions: 3;	selected revisions: 2
description:
${log_rev3}
${log_rev22}
${log_trailer}"
	  dotest log-rd8a "${testcvs} -q rlog -rtag1:tag2 -S first-dir" \
"${SPROG} rlog: warning: no revision .tag1. in .${CVSROOT_DIRNAME}/first-dir/Attic/file1,v.
${SPROG} rlog: warning: no revision .tag2. in .${CVSROOT_DIRNAME}/first-dir/Attic/file1,v.
${rlog_header2}
${log_tags2}
${log_keyword}
total revisions: 3;	selected revisions: 2
description:
${log_rev3}
${log_rev22}
${log_trailer}"

	  dotest log-d99 "${testcvs} -q up -rbranch" \
"[UP] file1
${SPROG} update: \`file2' is no longer in the repository"

	  # Now test outdating revisions

	  dotest log-o0 "${testcvs} admin -o 1.2.2.2:: file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/Attic/file1,v
done"
	  dotest log-o1 "${testcvs} admin -o ::1.2.2.1 file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/Attic/file1,v
done"
	  dotest log-o2 "${testcvs} admin -o 1.2.2.1:: file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/Attic/file1,v
deleting revision 1\.2\.2\.2
done"
	  dotest log-o3 "${testcvs} log file1" \
"${log_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 5
description:
${log_rev4}
${log_rev3}
${log_rev2}
${log_rev1}
${log_rev1b}
${log_trailer}"
	  dotest log-ro3 "${testcvs} rlog first-dir/file1" \
"${rlog_header1}
${log_tags1}
${log_keyword}
total revisions: 5;	selected revisions: 5
description:
${log_rev4}
${log_rev3}
${log_rev2}
${log_rev1}
${log_rev1b}
${log_trailer}"
	  dotest log-o4 "${testcvs} -q update -p -r 1.2.2.1 file1" \
"first branch revision"

	  dokeep
	  cd ..
	  rm -r first-dir
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	log2)
	  # More "cvs log" tests, for example the file description.

	  # Check in a file
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  dotest log2-1 "$testcvs -q co first-dir"
	  cd first-dir
	  echo 'first revision' > file1
	  dotest log2-2 "${testcvs} add -m file1-is-for-testing file1" \
"${SPROG}"' add: scheduling file `file1'\'' for addition
'"${SPROG}"' add: use .'"${SPROG}"' commit. to add this file permanently'
	  dotest log2-3 "${testcvs} -q commit -m 1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  # Setting the file description with add -m doesn't yet work
	  # client/server, so skip log2-4 for remote.
	  if $remote; then :; else

	    dotest log2-4 "${testcvs} log -N file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch:
locks: strict
access list:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
file1-is-for-testing
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
1
============================================================================="

	  fi # end of tests skipped for remote

	  dotest log2-5 "${testcvs} admin -t-change-description file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
done"
	  dotest log2-6 "${testcvs} log -N file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch:
locks: strict
access list:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
change-description
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
1
============================================================================="

	  echo 'longer description' >${TESTDIR}/descrip
	  echo 'with two lines' >>${TESTDIR}/descrip
	  dotest log2-7 "${testcvs} admin -t${TESTDIR}/descrip file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
done"
	  dotest_fail log2-7a "${testcvs} admin -t${TESTDIR}/nonexist file1" \
"${CPROG} \[admin aborted\]: can't stat ${TESTDIR}/nonexist: No such file or directory"
	  dotest log2-8 "${testcvs} log -N file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch:
locks: strict
access list:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
longer description
with two lines
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
1
============================================================================="

	  # TODO: `cvs admin -t "my message" file1' is a request to
	  # read the message from stdin and to operate on two files.
	  # Should test that there is an error because "my message"
	  # doesn't exist.

	  dotest log2-9 "echo change from stdin | ${testcvs} admin -t -q file1" ""
	  dotest log2-10 "${testcvs} log -N file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch:
locks: strict
access list:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
change from stdin
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
1
============================================================================="

	  dokeep
	  cd ..
	  rm $TESTDIR/descrip
	  rm -r first-dir
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	logopt)
	  # Some tests of log.c's option parsing and such things.
	  mkdir 1; cd 1
	  dotest logopt-1 "$testcvs -q co -l ." ''
	  mkdir first-dir
	  dotest logopt-2 "$testcvs add first-dir" \
"Directory $CVSROOT_DIRNAME/first-dir added to the repository"
	  cd first-dir
	  echo hi >file1
	  dotest logopt-3 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest logopt-4 "${testcvs} -q ci -m add file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  cd ..

	  dotest logopt-5 "${testcvs} log -R -d 2038-01-01" \
"${SPROG} log: Logging \.
${SPROG} log: Logging first-dir
${CVSROOT_DIRNAME}/first-dir/file1,v"
	  dotest logopt-6 "${testcvs} log -d 2038-01-01 -R" \
"${SPROG} log: Logging \.
${SPROG} log: Logging first-dir
${CVSROOT_DIRNAME}/first-dir/file1,v"
	  dotest logopt-6a "${testcvs} log -Rd 2038-01-01" \
"${SPROG} log: Logging \.
${SPROG} log: Logging first-dir
${CVSROOT_DIRNAME}/first-dir/file1,v"
	  dotest logopt-7 "${testcvs} log -s Exp -R" \
"${SPROG} log: Logging \.
${SPROG} log: Logging first-dir
${CVSROOT_DIRNAME}/first-dir/file1,v"

	  dokeep
	  cd ..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	ann)
	  # Tests of "cvs annotate".  See also:
	  #   basica-10  A simple annotate test
	  #   rcs        Annotate and the year 2000
	  #   keywordlog Annotate and $Log.
	  mkdir 1; cd 1
	  dotest ann-1 "$testcvs -q co -l ."
	  mkdir first-dir
	  dotest ann-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  cat >file1 <<EOF
this
is
the
ancestral
file
EOF
	  dotest ann-3 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest ann-4 "${testcvs} -q ci -m add file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  cat >file1 <<EOF
this
is
a
file

with
a
blank
line
EOF
	  dotest ann-5 "${testcvs} -q ci -m modify file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1"
	  dotest ann-6 "${testcvs} -q tag -b br" "T file1"
	  cat >file1 <<EOF
this
is
a
trunk file

with
a
blank
line
EOF
	  dotest ann-7 "${testcvs} -q ci -m modify file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.3; previous revision: 1\.2"
	  dotest ann-8 "${testcvs} -q update -r br" "[UP] file1"
	  cat >file1 <<EOF
this
is
a
file

with
a
blank
line
and some
branched content
EOF
	  dotest ann-9 "${testcvs} -q ci -m modify" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2\.2\.1; previous revision: 1\.2"
	  # Note that this annotates the trunk despite the presence
	  # of a sticky tag in the current directory.  This is
	  # fairly bogus, but it is the longstanding behavior for
	  # whatever that is worth.
	  dotest ann-10 "${testcvs} ann" \
"
Annotations for file1
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
1\.1          ($username8 *[0-9a-zA-Z-]*): this
1\.1          ($username8 *[0-9a-zA-Z-]*): is
1\.2          ($username8 *[0-9a-zA-Z-]*): a
1\.3          ($username8 *[0-9a-zA-Z-]*): trunk file
1\.2          ($username8 *[0-9a-zA-Z-]*): 
1\.2          ($username8 *[0-9a-zA-Z-]*): with
1\.2          ($username8 *[0-9a-zA-Z-]*): a
1\.2          ($username8 *[0-9a-zA-Z-]*): blank
1\.2          ($username8 *[0-9a-zA-Z-]*): line"
	  dotest ann-11 "${testcvs} ann -r br" \
"
Annotations for file1
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
1\.1          ($username8 *[0-9a-zA-Z-]*): this
1\.1          ($username8 *[0-9a-zA-Z-]*): is
1\.2          ($username8 *[0-9a-zA-Z-]*): a
1\.1          ($username8 *[0-9a-zA-Z-]*): file
1\.2          ($username8 *[0-9a-zA-Z-]*): 
1\.2          ($username8 *[0-9a-zA-Z-]*): with
1\.2          ($username8 *[0-9a-zA-Z-]*): a
1\.2          ($username8 *[0-9a-zA-Z-]*): blank
1\.2          ($username8 *[0-9a-zA-Z-]*): line
1\.2\.2\.1      ($username8 *[0-9a-zA-Z-]*): and some
1\.2\.2\.1      ($username8 *[0-9a-zA-Z-]*): branched content"
	  # FIXCVS: shouldn't "-r 1.2.0.2" be the same as "-r br"?
	  dotest ann-12 "${testcvs} ann -r 1.2.0.2 file1" ""
	  dotest ann-13 "${testcvs} ann -r 1.2.2 file1" \
"
Annotations for file1
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
1\.1          ($username8 *[0-9a-zA-Z-]*): this
1\.1          ($username8 *[0-9a-zA-Z-]*): is
1\.2          ($username8 *[0-9a-zA-Z-]*): a
1\.1          ($username8 *[0-9a-zA-Z-]*): file
1\.2          ($username8 *[0-9a-zA-Z-]*): 
1\.2          ($username8 *[0-9a-zA-Z-]*): with
1\.2          ($username8 *[0-9a-zA-Z-]*): a
1\.2          ($username8 *[0-9a-zA-Z-]*): blank
1\.2          ($username8 *[0-9a-zA-Z-]*): line
1\.2\.2\.1      ($username8 *[0-9a-zA-Z-]*): and some
1\.2\.2\.1      ($username8 *[0-9a-zA-Z-]*): branched content"
	  dotest_fail ann-14 "$testcvs ann -r bill-clintons-chastity file1" \
"$SPROG \[annotate aborted\]: no such tag \`bill-clintons-chastity'"

	  # Now get rid of the working directory and test rannotate

	  cd ../..
	  rm -r 1
	  dotest ann-r10 "${testcvs} rann first-dir" \
"
Annotations for first-dir/file1
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
1\.1          ($username8 *[0-9a-zA-Z-]*): this
1\.1          ($username8 *[0-9a-zA-Z-]*): is
1\.2          ($username8 *[0-9a-zA-Z-]*): a
1\.3          ($username8 *[0-9a-zA-Z-]*): trunk file
1\.2          ($username8 *[0-9a-zA-Z-]*): 
1\.2          ($username8 *[0-9a-zA-Z-]*): with
1\.2          ($username8 *[0-9a-zA-Z-]*): a
1\.2          ($username8 *[0-9a-zA-Z-]*): blank
1\.2          ($username8 *[0-9a-zA-Z-]*): line"
	  dotest ann-r11 "${testcvs} rann -r br first-dir" \
"
Annotations for first-dir/file1
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
1\.1          ($username8 *[0-9a-zA-Z-]*): this
1\.1          ($username8 *[0-9a-zA-Z-]*): is
1\.2          ($username8 *[0-9a-zA-Z-]*): a
1\.1          ($username8 *[0-9a-zA-Z-]*): file
1\.2          ($username8 *[0-9a-zA-Z-]*): 
1\.2          ($username8 *[0-9a-zA-Z-]*): with
1\.2          ($username8 *[0-9a-zA-Z-]*): a
1\.2          ($username8 *[0-9a-zA-Z-]*): blank
1\.2          ($username8 *[0-9a-zA-Z-]*): line
1\.2\.2\.1      ($username8 *[0-9a-zA-Z-]*): and some
1\.2\.2\.1      ($username8 *[0-9a-zA-Z-]*): branched content"
	  dotest ann-r12 "${testcvs} rann -r 1.2.0.2 first-dir/file1" ""
	  dotest ann-r13 "${testcvs} rann -r 1.2.2 first-dir/file1" \
"
Annotations for first-dir/file1
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
1\.1          ($username8 *[0-9a-zA-Z-]*): this
1\.1          ($username8 *[0-9a-zA-Z-]*): is
1\.2          ($username8 *[0-9a-zA-Z-]*): a
1\.1          ($username8 *[0-9a-zA-Z-]*): file
1\.2          ($username8 *[0-9a-zA-Z-]*): 
1\.2          ($username8 *[0-9a-zA-Z-]*): with
1\.2          ($username8 *[0-9a-zA-Z-]*): a
1\.2          ($username8 *[0-9a-zA-Z-]*): blank
1\.2          ($username8 *[0-9a-zA-Z-]*): line
1\.2\.2\.1      ($username8 *[0-9a-zA-Z-]*): and some
1\.2\.2\.1      ($username8 *[0-9a-zA-Z-]*): branched content"
	  dotest_fail ann-r14 "$testcvs rann -r bill-clintons-chastity first-dir/file1" \
"$SPROG \[rannotate aborted\]: no such tag \`bill-clintons-chastity'"

	  dokeep
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	ann-id)
	  # Demonstrate that cvs-1.9.28.1 improperly expands rcs keywords in
	  # the output of `cvs annotate' -- it uses values from the previous
	  # delta.  In this case, `1.1' instead of `1.2', even though it puts
	  # the proper version number on the prefix to each line of output.
	  mkdir 1; cd 1
	  dotest ann-id-1 "$testcvs -q co -l ."
	  module=x
	  mkdir $module
	  dotest ann-id-2 "${testcvs} add $module" \
"Directory ${CVSROOT_DIRNAME}/$module added to the repository"
	  cd $module

	  file=m
	  echo '$Id''$' > $file

	  dotest ann-id-3 "$testcvs add $file" \
"$SPROG add: scheduling file .$file. for addition
$SPROG add: use .$SPROG commit. to add this file permanently"
	  dotest ann-id-4 "$testcvs -Q ci -m . $file"

	  echo line2 >> $file
	  dotest ann-id-5 "$testcvs -Q ci -m . $file"

	  # The version number after $file,v should be `1.2'.
	  # 1.9.28.1 puts `1.1' there.
	  dotest ann-id-6 "$testcvs -Q ann $file" \
"
Annotations for $file
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
1.2          ($username8 *[0-9a-zA-Z-]*): "'\$'"Id: $file,v 1.1 [0-9/]* [0-9:]* $username Exp "'\$'"
1.2          ($username8 *[0-9a-zA-Z-]*): line2"

	  dokeep
	  cd ../..
	  rm -rf 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/$module
	  ;;



	crerepos)
	  # Various tests relating to creating repositories, operating
	  # on repositories created with old versions of CVS, etc.

	  CVS_SERVER_save=$CVS_SERVER

	  # Because this test is all about -d options and such, it
	  # at least to some extent needs to be different for remote vs.
	  # local.
	  if $remote; then

	    # Use :ext: rather than :fork:.  Most of the tests use :fork:,
	    # so we want to make sure that we test :ext: _somewhere_.
	    # Make sure 'rsh' works first.
	    require_rsh "$CVS_RSH"
	    if test $? -eq 77; then
		skip crerepos "$skipreason"
		continue
	    fi

            # Make sure server ignores real $HOME/.cvsrc:
            cat >$TESTDIR/cvs-setHome <<EOF
#!$TESTSHELL
HOME=$HOME
export HOME
exec $CVS_SERVER "\$@"
EOF
            chmod a+x $TESTDIR/cvs-setHome

	    # Note that we set CVS_SERVER at the beginning.
	    CVS_SERVER=$TESTDIR/cvs-setHome; export CVS_SERVER
	    CREREPOS_ROOT=:ext:$host$TESTDIR/crerepos
	  else # local
	    CREREPOS_ROOT=$TESTDIR/crerepos
	  fi

	  # First, if the repository doesn't exist at all...
	  dotest_fail crerepos-1 \
"${testcvs} -d ${TESTDIR}/crerepos co cvs-sanity" \
"${SPROG} \[checkout aborted\]: ${TESTDIR}/crerepos/CVSROOT: .*"
	  mkdir crerepos

	  # The repository exists but CVSROOT doesn't.
	  dotest_fail crerepos-2 \
"${testcvs} -d ${TESTDIR}/crerepos co cvs-sanity" \
"${SPROG} \[checkout aborted\]: ${TESTDIR}/crerepos/CVSROOT: .*"
	  mkdir crerepos/CVSROOT

	  # Checkout of nonexistent module
	  dotest_fail crerepos-3 \
"${testcvs} -d ${TESTDIR}/crerepos co cvs-sanity" \
"${SPROG} checkout: cannot find module .cvs-sanity. - ignored"

	  # Now test that CVS works correctly without a modules file
	  # or any of that other stuff.  In particular, it *must*
	  # function if administrative files added to CVS recently (since
	  # CVS 1.3) do not exist, because the repository might have
	  # been created with an old version of CVS.
	  mkdir 1; cd 1
	  dotest crerepos-4 \
"${testcvs} -q -d ${TESTDIR}/crerepos co CVSROOT" \
''
	  dotest crerepos-5 \
"echo yes | $testcvs -d $TESTDIR/crerepos release -d CVSROOT" \
"You have \[0\] altered files in this repository\.
Are you sure you want to release (and delete) directory \`CVSROOT': "
	  rm -rf CVS
	  cd ..
	  # The directory 1 should be empty
	  dotest crerepos-6 "rmdir 1"

	  if $remote; then
	    # Test that CVS rejects a relative path in CVSROOT.
	    mkdir 1; cd 1
	    # Note that having the client reject the pathname (as :fork:
	    # does), does _not_ test for the bugs we are trying to catch
	    # here.  The point is that malicious clients might send all
	    # manner of things and the server better protect itself.
	    dotest_fail crerepos-6a-r \
"${testcvs} -q -d :ext:`hostname`:../crerepos get ." \
"${CPROG} checkout: CVSROOT may only specify a positive, non-zero, integer port (not .\.\..)\.
${CPROG} checkout: Perhaps you entered a relative pathname${QUESTION}
${CPROG} \[checkout aborted\]: Bad CVSROOT: .:ext:${hostname}:\.\./crerepos.\."
	    cd ..
	    rm -r 1

	    mkdir 1; cd 1
	    dotest_fail crerepos-6b-r \
"${testcvs} -d :ext:`hostname`:crerepos init" \
"${CPROG} init: CVSROOT requires a path spec:
${CPROG} init: :(gserver|kserver|pserver):\[\[user\]\[:password\]@\]host\[:\[port\]\]/path
${CPROG} init: \[:(ext|server):\]\[\[user\]@\]host\[:\]/path
${CPROG} \[init aborted\]: Bad CVSROOT: .:ext:${hostname}:crerepos.\."
	    cd ..
	    rm -r 1
	  else # local
	    # Test that CVS rejects a relative path in CVSROOT.

	    mkdir 1; cd 1
	    # Set CVS_RSH=false since ocassionally (e.g. when CVS_RSH=ssh on
	    # some systems) some rsh implementations will block because they
	    # can look up '..' and want to ask the user about the unknown host
	    # key or somesuch.  Which error message we get depends on whether
	    # false finishes running before we try to talk to it or not.
	    dotest_fail crerepos-6a "CVS_RSH=false ${testcvs} -q -d ../crerepos get ." \
"${SPROG} \[checkout aborted\]: end of file from server (consult above messages if any)" \
"${SPROG} \[checkout aborted\]: received broken pipe signal"
	    cd ..
	    rm -r 1

	    mkdir 1; cd 1
	    dotest_fail crerepos-6b "${testcvs} -d crerepos init" \
"${SPROG} init: CVSROOT must be an absolute pathname (not .crerepos.)
${SPROG} init: when using local access method\.
${SPROG} \[init aborted\]: Bad CVSROOT: .crerepos.\."
	    cd ..
	    rm -r 1
	  fi # end of tests to be skipped for remote

	  # CVS should have created a history file.  If the administrator 
	  # doesn't need it and wants to save on disk space, they just
	  # delete it and set LogHistory = the empty string in config.
	  dotest crerepos-7 "test -f $TESTDIR/crerepos/CVSROOT/history"

	  # Now test mixing repositories.  This kind of thing tends to
	  # happen accidentally when people work with several repositories.
	  mkdir 1; cd 1
	  dotest crerepos-8 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest crerepos-9 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  touch file1
	  dotest crerepos-10 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest crerepos-11 "${testcvs} -q ci -m add-it" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  cd ../..
	  rm -r 1

	  mkdir 1; cd 1
	  dotest crerepos-12 "$testcvs -d $CREREPOS_ROOT -q co -l ."
	  mkdir crerepos-dir
	  dotest crerepos-13 "$testcvs add crerepos-dir" \
"Directory $TESTDIR/crerepos/crerepos-dir added to the repository"
	  cd crerepos-dir
	  touch cfile
	  dotest crerepos-14 "${testcvs} add cfile" \
"${SPROG} add: scheduling file .cfile. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest crerepos-15 "${testcvs} -q ci -m add-it" \
"$TESTDIR/crerepos/crerepos-dir/cfile,v  <--  cfile
initial revision: 1\.1"
	  cd ../..
	  rm -r 1

	  mkdir 1; cd 1
	  dotest crerepos-16 "${testcvs} co first-dir" \
"${SPROG} checkout: Updating first-dir
U first-dir/file1"
	  dotest crerepos-17 "${testcvs} -d ${CREREPOS_ROOT} co crerepos-dir" \
"${SPROG} checkout: Updating crerepos-dir
U crerepos-dir/cfile"
	  dotest crerepos-18 "${testcvs} update" \
"${SPROG} update: Updating first-dir
${SPROG} update: Updating crerepos-dir"

	  cd ..

          CVS_SERVER=$CVS_SERVER_save; export CVS_SERVER

	  if $keep; then
	    echo Keeping ${TESTDIR} and exiting due to --keep
	    exit 0
	  fi

	  dokeep
          rm -f $TESTDIR/cvs-setHome
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  rm -rf $TESTDIR/crerepos
	  ;;



	rcs)
	  # Test ability to import an RCS file.  Note that this format
	  # is fixed--files written by RCS5, and other software which
	  # implements this format, will be out there "forever" and
	  # CVS must always be able to import such files.

	  # See tests admin-13, admin-25 and rcs-8a for exporting RCS files.

	  # Save the timezone and set it to UTC for these tests to make the
	  # value more predicatable.
	  save_TZ=$TZ
	  TZ=UTC0; export TZ

	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir

	  # Currently the way to import an RCS file is to copy it
	  # directly into the repository.
	  #
	  # This file was written by RCS 5.7, and then the dates were
	  # hacked so that we test year 2000 stuff.  Note also that
	  # "author" names are just strings, as far as importing
	  # RCS files is concerned--they need not correspond to user
	  # IDs on any particular system.
	  #
	  # I also tried writing a file with the RCS supplied with
	  # HPUX A.09.05.  According to "man rcsintro" this is
	  # "Revision Number: 3.0; Release Date: 83/05/11".  There
	  # were a few minor differences like whitespace but at least
	  # in simple cases like this everything else seemed the same
	  # as the file written by RCS 5.7 (so I won't try to make it
	  # a separate test case).

	  cat <<EOF >$TESTDIR/file1,v
head	1.3;
access;
symbols;
locks; strict;
comment	@# @;


1.3
date	${RAWRCSDATE2000A};	author kingdon;	state Exp;
branches;
next	1.2;

1.2
date	${RAWRCSDATE1996A};	author kingdon;	state Exp;
branches;
next	1.1;

1.1
date	${RAWRCSDATE1996B};	author kingdon;	state Exp;
branches;
next	;


desc
@file1 is for testing CVS
@


1.3
log
@delete second line; modify twelfth line
@
text
@This is the first line
This is the third line
This is the fourth line
This is the fifth line
This is the sixth line
This is the seventh line
This is the eighth line
This is the ninth line
This is the tenth line
This is the eleventh line
This is the twelfth line (and what a line it is)
This is the thirteenth line
@


1.2
log
@add more lines
@
text
@a1 1
This is the second line
d11 1
a11 1
This is the twelfth line
@


1.1
log
@add file1
@
text
@d2 12
@
EOF
	  modify_repo mv $TESTDIR/file1,v $CVSROOT_DIRNAME/first-dir/file1,v

	  dotest rcs-1 "$testcvs -q co first-dir" 'U first-dir/file1'
	  cd first-dir
	  dotest rcs-2 "$testcvs -q log" "
RCS file: $CVSROOT_DIRNAME/first-dir/file1,v
Working file: file1
head: 1\.3
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 3;	selected revisions: 3
description:
file1 is for testing CVS
----------------------------
revision 1\.3
date: ${ISO8601DATE2000A};  author: kingdon;  state: Exp;  lines: ${PLUS}1 -2;
delete second line; modify twelfth line
----------------------------
revision 1\.2
date: ${ISO8601DATE1996A};  author: kingdon;  state: Exp;  lines: ${PLUS}12 -0;
add more lines
----------------------------
revision 1\.1
date: ${ISO8601DATE1996B};  author: kingdon;  state: Exp;
add file1
============================================================================="

	  # Note that the dates here are chosen so that (a) we test
	  # at least one date after 2000, (b) we will notice if the
	  # month and day are getting mixed up with each other.
	  # TODO: also test that year isn't getting mixed up with month
	  # or day, for example 01-02-03.

	  # ISO8601 format.  There are many, many, other variations
	  # specified by ISO8601 which we should be testing too.
	  dotest rcs-3 "${testcvs} -q log -d '1996-12-11<'" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.3
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 3;	selected revisions: 1
description:
file1 is for testing CVS
----------------------------
revision 1\.3
date: ${ISO8601DATE2000A};  author: kingdon;  state: Exp;  lines: ${PLUS}1 -2;
delete second line; modify twelfth line
============================================================================="

	  # RFC822 format (as amended by RFC1123).
	  dotest rcs-4 "${testcvs} -q log -d '<3 Apr 2000 00:00'" \
"
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.3
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 3;	selected revisions: 2
description:
file1 is for testing CVS
----------------------------
revision 1\.2
date: ${ISO8601DATE1996A};  author: kingdon;  state: Exp;  lines: ${PLUS}12 -0;
add more lines
----------------------------
revision 1\.1
date: ${ISO8601DATE1996B};  author: kingdon;  state: Exp;
add file1
============================================================================="

	  # Intended behavior for "cvs annotate" is that it displays the
	  # last two digits of the year.  Make sure it does that rather
	  # than some bogosity like "100".
	  dotest rcs-4a "${testcvs} annotate file1" \
"
Annotations for file1
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
1\.1          (kingdon  24-Nov-96): This is the first line
1\.2          (kingdon  24-Nov-96): This is the third line
1\.2          (kingdon  24-Nov-96): This is the fourth line
1\.2          (kingdon  24-Nov-96): This is the fifth line
1\.2          (kingdon  24-Nov-96): This is the sixth line
1\.2          (kingdon  24-Nov-96): This is the seventh line
1\.2          (kingdon  24-Nov-96): This is the eighth line
1\.2          (kingdon  24-Nov-96): This is the ninth line
1\.2          (kingdon  24-Nov-96): This is the tenth line
1\.2          (kingdon  24-Nov-96): This is the eleventh line
1\.3          (kingdon  24-Nov-00): This is the twelfth line (and what a line it is)
1\.2          (kingdon  24-Nov-96): This is the thirteenth line"

	  # Probably should split this test into two at this point (file1
	  # above this line and file2 below), as the two share little
	  # data/setup.

	  # OK, here is another one.  This one was written by hand based on
	  # doc/RCSFILES and friends.  One subtle point is that none of
	  # the lines end with newlines; that is a feature which we
	  # should be testing.
	  cat <<EOF >$TESTDIR/file2,v
head			 	1.5                 ;
     branch        1.2.6;
access ;
symbols branch:1.2.6;
locks;
testofanewphrase @without newphrase we'd have trouble extending @@ all@ ;
1.5 date 71.01.01.01.00.00; author joe; state bogus; branches; next 1.4;
1.4 date 71.01.01.00.00.05; author joe; state bogus; branches; next 1.3;
1.3 date 70.12.31.15.00.05; author joe; state bogus; branches; next 1.2;
1.2 date 70.12.31.12.15.05; author me; state bogus; branches 1.2.6.1; next 1.1;
1.1 date 70.12.31.11.00.05; author joe; state bogus; branches; next; newph;
1.2.6.1 date 71.01.01.08.00.05; author joe; state Exp; branches; next;
desc @@
1.5 log @@ newphrase1; newphrase2 42; text @head revision@
1.4 log @@ text @d1 1
a1 1
new year revision@
1.3 log @@ text @d1 1
a1 1
old year revision@
1.2 log @@ text @d1 1
a1 1
mid revision@ 1.1

log           @@ text @d1 1
a1 1
start revision@
1.2.6.1 log @@ text @d1 1
a1 1
branch revision@
EOF
	  modify_repo mv $TESTDIR/file2,v $CVSROOT_DIRNAME/first-dir/file2,v
	  # ' Match the single quote in above here doc -- for font-lock mode.

	  # First test the default branch.
	  dotest rcs-5 "${testcvs} -q update file2" "U file2"
	  dotest rcs-6 "cat file2" "branch revision"

	  # Check in a revision on the branch to force CVS to
	  # interpret every revision in the file.
	  dotest rcs-6a "${testcvs} -q update -r branch file2" ""
	  echo "next branch revision" > file2
	  dotest rcs-6b "${testcvs} -q ci -m mod file2" \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.2\.6\.2; previous revision: 1\.2\.6\.1"

	  # Now get rid of the default branch, it will get in the way.
	  dotest rcs-7 "${testcvs} admin -b file2" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
done"
	  # But we do want to make sure that "cvs admin" leaves the newphrases
	  # in the file.
	  # The extra whitespace regexps are for the RCS library, which does
	  # not preserve whitespace in the dogmatic manner of RCS 5.7. -twp
	  dotest rcs-8 \
"grep testofanewphrase ${CVSROOT_DIRNAME}/first-dir/file2,v" \
"testofanewphrase[	 ][ 	]*@without newphrase we'd have trouble extending @@ all@[	 ]*;"
	  # The easiest way to test for newphrases in deltas and deltatexts
	  # is to just look at the whole file, I guess.
	  dotest rcs-8a "cat ${CVSROOT_DIRNAME}/first-dir/file2,v" \
"head	1\.5;
access;
symbols
	branch:1.2.6;
locks;

testofanewphrase	@without newphrase we'd have trouble extending @@ all@;

1\.5
date	71\.01\.01\.01\.00\.00;	author joe;	state bogus;
branches;
next	1\.4;

1\.4
date	71\.01\.01\.00\.00\.05;	author joe;	state bogus;
branches;
next	1\.3;

1\.3
date	70\.12\.31\.15\.00\.05;	author joe;	state bogus;
branches;
next	1\.2;

1\.2
date	70\.12\.31\.12\.15\.05;	author me;	state bogus;
branches
	1\.2\.6\.1;
next	1\.1;

1\.1
date	70\.12\.31\.11\.00\.05;	author joe;	state bogus;
branches;
next	;
newph	;

1\.2\.6\.1
date	71\.01\.01\.08\.00\.05;	author joe;	state Exp;
branches;
next	1\.2\.6\.2;

1\.2\.6\.2
date	[0-9.]*;	author ${username};	state Exp;
branches;
next	;
commitid	${commitid};


desc
@@


1\.5
log
@@
newphrase1	;
newphrase2	42;
text
@head revision@


1\.4
log
@@
text
@d1 1
a1 1
new year revision@


1\.3
log
@@
text
@d1 1
a1 1
old year revision@


1\.2
log
@@
text
@d1 1
a1 1
mid revision@


1\.1
log
@@
text
@d1 1
a1 1
start revision@


1\.2\.6\.1
log
@@
text
@d1 1
a1 1
branch revision@


1\.2\.6\.2
log
@mod
@
text
@d1 1
a1 1
next branch revision
@"

	  dotest rcs-9 "${testcvs} -q update -p -D '1970-12-31 11:30 UT' file2" \
"start revision"

	  dotest rcs-10 "${testcvs} -q update -p -D '1970-12-31 12:30 UT' file2" \
"mid revision"

	  dotest rcs-11 "${testcvs} -q update -p -D '1971-01-01 00:30 UT' file2" \
"new year revision"

	  # Same test as rcs-10, but with am/pm.
	  dotest rcs-12 "${testcvs} -q update -p -D 'December 31, 1970 12:30pm UT' file2" \
"mid revision"

	  # Same test as rcs-11, but with am/pm.
	  dotest rcs-13 "${testcvs} -q update -p -D 'January 1, 1971 12:30am UT' file2" \
"new year revision"

	  # OK, now make sure cvs log doesn't have any trouble with the
	  # newphrases and such.
	  dotest rcs-14 "${testcvs} -q log file2" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
Working file: file2
head: 1\.5
branch:
locks:
access list:
symbolic names:
	branch: 1\.2\.6
keyword substitution: kv
total revisions: 7;	selected revisions: 7
description:
----------------------------
revision 1\.5
date: 1971-01-01 01:00:00 [+-]0000;  author: joe;  state: bogus;  lines: ${PLUS}1 -1;
\*\*\* empty log message \*\*\*
----------------------------
revision 1\.4
date: 1971-01-01 00:00:05 [+-]0000;  author: joe;  state: bogus;  lines: ${PLUS}1 -1;
\*\*\* empty log message \*\*\*
----------------------------
revision 1\.3
date: 1970-12-31 15:00:05 [+-]0000;  author: joe;  state: bogus;  lines: ${PLUS}1 -1;
\*\*\* empty log message \*\*\*
----------------------------
revision 1\.2
date: 1970-12-31 12:15:05 [+-]0000;  author: me;  state: bogus;  lines: ${PLUS}1 -1;
branches:  1\.2\.6;
\*\*\* empty log message \*\*\*
----------------------------
revision 1\.1
date: 1970-12-31 11:00:05 [+-]0000;  author: joe;  state: bogus;
\*\*\* empty log message \*\*\*
----------------------------
revision 1\.2\.6\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -1;  commitid: ${commitid};
mod
----------------------------
revision 1\.2\.6\.1
date: 1971-01-01 08:00:05 [+-]0000;  author: joe;  state: Exp;  lines: ${PLUS}1 -1;
\*\*\* empty log message \*\*\*
============================================================================="
	  # Now test each date format for "cvs log -d".
	  # Earlier than 1971-01-01
	  dotest rcs-15 "${testcvs} -q log -d '<1971-01-01 00:00 GMT' file2 \
	    | grep revision" \
"total revisions: 7;	selected revisions: 3
revision 1\.3
revision 1\.2
revision 1\.1"
	  # Later than 1971-01-01
	  dotest rcs-16 "${testcvs} -q log -d '1971-01-01 00:00 GMT<' file2 \
	    | grep revision" \
"total revisions: 7;	selected revisions: 4
revision 1\.5
revision 1\.4
revision 1\.2\.6\.2
revision 1\.2\.6\.1"
	  # Alternate syntaxes for later and earlier; multiple -d options
	  dotest rcs-17 "${testcvs} -q log -d '>1971-01-01 00:00 GMT' \
	    -d '1970-12-31 12:15 GMT>' file2 | grep revision" \
"total revisions: 7;	selected revisions: 5
revision 1\.5
revision 1\.4
revision 1\.1
revision 1\.2\.6\.2
revision 1\.2\.6\.1"
	  # Range, and single date
	  dotest rcs-18 "${testcvs} -q log -d '1970-12-31 11:30 GMT' \
	    -d '1971-01-01 00:00:05 GMT<1971-01-01 01:00:01 GMT' \
	    file2 | grep revision" \
"total revisions: 7;	selected revisions: 2
revision 1\.5
revision 1\.1"
	  # Alternate range syntax; equality
	  dotest rcs-19 "${testcvs} -q log \
	    -d '1971-01-01 01:00:01 GMT>=1971-01-01 00:00:05 GMT' \
	    file2 | grep revision" \
"total revisions: 7;	selected revisions: 2
revision 1\.5
revision 1\.4"

	  dokeep
	  TZ=$save_TZ
	  cd ..
	  rm -r first-dir
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	rcs2)
	  # More date tests.  Might as well do this as a separate
	  # test from "rcs", so that we don't need to perturb the
	  # "written by RCS 5.7" RCS file.
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  # Significance of various dates:
	  # * At least one Y2K standard refers to recognizing 9 Sep 1999
	  #   (as an example of a pre-2000 date, I guess).
	  # * At least one Y2K standard refers to recognizing 1 Jan 2001
	  #   (as an example of a post-2000 date, I guess).
	  # * Many Y2K standards refer to 2000 being a leap year.
	  cat <<EOF >$TESTDIR/file1,v
head 1.7; access; symbols; locks; strict;
1.7 date 2004.08.31.01.01.01; author sue; state; branches; next 1.6;
1.6 date 2004.02.29.01.01.01; author sue; state; branches; next 1.5;
1.5 date 2003.02.28.01.01.01; author sue; state; branches; next 1.4;
1.4 date 2001.01.01.01.01.01; author sue; state; branches; next 1.3;
1.3 date 2000.02.29.01.01.01; author sue; state; branches; next 1.2;
1.2 date 99.09.09.01.01.01; author sue; state; branches; next 1.1;
1.1 date 98.09.10.01.01.01; author sue; state; branches; next;
desc @a test file@
1.7 log @@ text @head revision@
1.6 log @@ text @d1 1
a1 1
2004 was a great year for leaping@
1.5 log @@ text @d1 1
a1 1
2003 wasn't@
1.4 log @@ text @d1 1
a1 1
two year hiatus@
1.3 log @@ text @d1 1
a1 1
2000 is also a good year for leaping@
1.2 log @@ text @d1 1
a1 1
Tonight we're going to party like it's a certain year@
1.1 log @@ text @d1 1
a1 1
Need to start somewhere@
EOF
	  modify_repo mv $TESTDIR/file1,v $CVSROOT_DIRNAME/first-dir/file1,v
	  # ' Match the 3rd single quote in the here doc -- for font-lock mode.

	  dotest rcs2-1 "${testcvs} -q co first-dir" 'U first-dir/file1'
	  cd first-dir

	  # 9 Sep 1999
	  dotest rcs2-2 "${testcvs} -q update -p -D '1999-09-09 11:30 UT' file1" \
"Tonight we're going to party like it's a certain year"
	  # 1 Jan 2001.
	  dotest rcs2-3 "${testcvs} -q update -p -D '2001-01-01 11:30 UT' file1" \
"two year hiatus"
	  # 29 Feb 2000
	  dotest rcs2-4 "${testcvs} -q update -p -D '2000-02-29 11:30 UT' file1" \
"2000 is also a good year for leaping"
	  # 29 Feb 2003 is invalid
	  dotest_fail rcs2-5 "${testcvs} -q update -p -D '2003-02-29 11:30 UT' file1" \
"$CPROG \[update aborted\]: Can't parse date/time: \`2003-02-29 11:30 UT'"

	  dotest rcs2-6 "${testcvs} -q update -p -D 2007-01-07 file1" \
"head revision"
	  # This assumes that the clock of the machine running the tests
	  # is set to at least the year 1998 or so.  There don't seem
	  # to be a lot of ways to test the relative date code (short
	  # of something like LD_LIBRARY_PRELOAD'ing in our own
	  # getttimeofday, or hacking the CVS source with testing
	  # features, which always seems to be problematic since then
	  # someone feels like documenting them and things go downhill
	  # from there).
	  # 
	  # These tests can be expected to fail 3 times every 400 years
	  # starting Feb. 29, 2096 (because 8 years from that date would
	  # be Feb. 29, 2100, which is an invalid date -- 2100 isn't a
	  # leap year because it's divisible by 100 but not by 400).

	  dotest rcs2-7 "${testcvs} -q update -p -D '96 months' file1" \
"head revision"
	  dotest rcs2-8 "${testcvs} -q update -p -D '8 years' file1" \
"head revision"

	  dokeep
	  cd ..
	  rm -r first-dir
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	rcs3)
	  # More RCS file tests, in particular at least some of the
	  # error handling issues.
	  mkdir ${CVSROOT_DIRNAME}/first-dir
	  cat <<EOF >$TESTDIR/file1,v
head 1.1; access; symbols; locks; expand o; 1.1 date 2007.03.20.04.03.02
; author jeremiah ;state ;  branches; next;desc@@1.1log@@text@head@
EOF
	  modify_repo mv $TESTDIR/file1,v $CVSROOT_DIRNAME/first-dir/file1,v
	  mkdir 1; cd 1
	  # CVS requires whitespace between "desc" and its value.
	  # The rcsfile(5) manpage doesn't really seem to answer the
	  # question one way or the other (it has a grammar but almost
	  # nothing about lexical analysis).
	  dotest_fail rcs3-1 "${testcvs} -q co first-dir" \
"${SPROG} \[checkout aborted\]: EOF while looking for value in RCS file ${CVSROOT_DIRNAME}/first-dir/file1,v"
	  cat <<EOF >$TESTDIR/file1,v
head 1.1; access; symbols; locks; expand o; 1.1 date 2007.03.20.04.03.02
; author jeremiah ;state ;  branches; next;desc @@1.1log@@text@head@
EOF
	  modify_repo mv $TESTDIR/file1,v $CVSROOT_DIRNAME/first-dir/file1,v
	  # Whitespace issues, likewise.
	  dotest_fail rcs3-2 "${testcvs} -q co first-dir" \
"${SPROG} \[checkout aborted\]: unexpected '.x6c' reading revision number in RCS file ${CVSROOT_DIRNAME}/first-dir/file1,v"
	  cat <<EOF >$TESTDIR/file1,v
head 1.1; access; symbols; locks; expand o; 1.1 date 2007.03.20.04.03.02
; author jeremiah ;state ;  branches; next;desc @@1.1 log@@text@head@
EOF
	  modify_repo mv $TESTDIR/file1,v $CVSROOT_DIRNAME/first-dir/file1,v
	  # Charming array of different messages for similar
	  # whitespace issues (depending on where the whitespace is).
	  dotest_fail rcs3-3 "${testcvs} -q co first-dir" \
"${SPROG} \[checkout aborted\]: EOF while looking for value in RCS file ${CVSROOT_DIRNAME}/first-dir/file1,v"
	  cat <<EOF >$TESTDIR/file1,v
head 1.1; access; symbols; locks; expand o; 1.1 date 2007.03.20.04.03.02
; author jeremiah ;state ;  branches; next;desc @@1.1 log @@text @head@
EOF
	  modify_repo mv $TESTDIR/file1,v $CVSROOT_DIRNAME/first-dir/file1,v
	  dotest rcs3-4 "${testcvs} -q co first-dir" 'U first-dir/file1'

	  # Ouch, didn't expect this one.  FIXCVS.  Or maybe just remove
	  # the feature, if this is a -s problem?
	  dotest_fail rcs3-5 "${testcvs} log -s nostate first-dir/file1" \
"${DOTSTAR}ssertion.*failed${DOTSTAR}" "${DOTSTAR}failed assertion${DOTSTAR}"
	  cd first-dir
	  dotest_fail rcs3-5a "${testcvs} log -s nostate file1" \
"${DOTSTAR}ssertion.*failed${DOTSTAR}" "${DOTSTAR}failed assertion${DOTSTAR}"
	  cd ..

	  # See remote code above for rationale for cd.
	  cd first-dir
	  dotest rcs3-6 "${testcvs} log -R file1" \
"${CVSROOT_DIRNAME}/first-dir/file1,v"

	  # OK, now put an extraneous '\0' at the end.
	  mv $CVSROOT_DIRNAME/first-dir/file1,v $TESTDIR/file1,v
	  ${AWK} </dev/null 'BEGIN { printf "@%c", 10 }' | ${TR} '@' '\000' \
	    >>$TESTDIR/file1,v
	  modify_repo mv $TESTDIR/file1,v $CVSROOT_DIRNAME/first-dir/file1,v
	  dotest_fail rcs3-7 "${testcvs} log -s nostate file1" \
"${SPROG} \[log aborted\]: unexpected '.x0' reading revision number in RCS file ${CVSROOT_DIRNAME}/first-dir/file1,v"

	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	rcs4)
	  # Fix a bug that shows up when checking out files by date with the
	  # "-D date" command line option.  There is code in the original to
	  # handle a special case.  If the date search finds revision 1.1 it
	  # is supposed to check whether revision 1.1.1.1 has the same date
	  # stamp, which would indicate that the file was originally brought
	  # in with "cvs import".  In that case it is supposed to return the
	  # vendor branch version 1.1.1.1.
	  # 
	  # However, there is a bug in the code. It actually compares
	  # the date of revision 1.1 for equality with the date given
	  # on the command line -- clearly wrong. This commit fixes
	  # the coding bug.
	  # 
	  # There is an additional bug which is _not_ fixed yet. 
	  # The date comparison should not be a strict
	  # equality test. It should allow a fudge factor of, say, 2-3
	  # seconds. Old versions of CVS created the two revisions
	  # with two separate invocations of the RCS "ci" command. We
	  # have many old files in the tree in which the dates of
	  # revisions 1.1 and 1.1.1.1 differ by 1 second.

	  # Need a predictable time zone.
	  save_TZ=$TZ
	  TZ=UTC0; export TZ

          mkdir rcs4
          cd rcs4

	  mkdir imp-dir
	  cd imp-dir
	  echo 'OpenMunger sources' >file1

	  # choose a time in the past to demonstrate the problem
	  touch -t 200012010123 file1

	  dotest_sort rcs4-1 \
"${testcvs} import -d -m add rcs4-dir openmunger openmunger-1_0" \
'

N rcs4-dir/file1
No conflicts created by this import'
	  echo 'OpenMunger sources release 1.1 extras' >>file1
	  touch -t 200112011234 file1
	  dotest_sort rcs4-2 \
"${testcvs} import -d -m add rcs4-dir openmunger openmunger-1_1" \
'

No conflicts created by this import
U rcs4-dir/file1'
	  cd ..
	  # Next checkout the new module
	  dotest rcs4-3 \
"${testcvs} -q co rcs4-dir" \
'U rcs4-dir/file1'
	  cd rcs4-dir
	  echo 'local change' >> file1

	  # commit a local change
	  dotest rcs4-4 "${testcvs} -q commit -m hack file1" \
"$CVSROOT_DIRNAME/rcs4-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1"
	  # now see if we get version 1.1 or 1.1.1.1 when we ask for
	  # a checkout by time... it really should be 1.1.1.1 as
          # that was indeed the version that was visible at the target
	  # time.
	  dotest rcs4-5 \
"${testcvs} -q update -D 'October 1, 2001 UTC' file1" \
'[UP] file1'
	  dotest rcs4-6 \
"${testcvs} -q status file1" \
'===================================================================
File: file1            	Status: Up-to-date

   Working revision:	1\.1\.1\.1.*
   Repository revision:	1\.1\.1\.1	'${CVSROOT_DIRNAME}'/rcs4-dir/file1,v
   Commit Identifier:	'${commitid}'
   Sticky Tag:		(none)
   Sticky Date:		2001\.10\.01\.00\.00\.00
   Sticky Options:	(none)'

	  dokeep
	  TZ=$save_TZ
	  cd ../..
          rm -r rcs4
          modify_repo rm -rf $CVSROOT_DIRNAME/rcs4-dir
	  ;;



	rcs5)
	  # Some tests of the $Log keyword and log message without a trailing
	  # EOL.  This used to look ugly and, in the worst case, could cause
	  # a seg fault due to a buffer overflow.
	  #
	  # Note that it should not be possible to create this situation via a
	  # CVS server (and any client), since the server itself inserts the
	  # trailing EOL onto log messages that are missing one.  Still, we
	  # shouldn't segfault due to a corrupt RCS file and I think that a log
	  # message without the trailing EOL doesn't actually violate the RCS
	  # spec, though it doesn't appear to be possible to create such a log
	  # message using RCS 5.7.

	  modify_repo mkdir $CVSROOT_DIRNAME/rcs5
	  cat <<\EOF >$TESTDIR/file1,v
head 1.1;
access;
symbols;
locks;
expand kv;

1.1 date 2007.03.20.04.03.02; author jeremiah; state Ext;  branches; next;

desc
@@

1.1
log
@he always had very fine wine@
text
@line1
/*
EOF
echo ' * History: $''Log$' >>$TESTDIR/file1,v
	  cat <<\EOF >>$TESTDIR/file1,v
 */
line5
@
EOF
	  modify_repo mv $TESTDIR/file1,v $CVSROOT_DIRNAME/rcs5/file1,v

          mkdir rcs5
          cd rcs5
	  dotest rcs5-1 "$testcvs -Q co rcs5"
	  dotest rcs5-2 "cat rcs5/file1" \
"line1
/\\*
 \\* History: "'\$'"Log: file1,v "'\$'"
 \\* History: Revision 1\.1  2007/03/20 04:03:02  jeremiah
 \\* History: he always had very fine wine
 \\* History:
 \\*/
line5"

	  cd ..
          rm -r rcs5
          modify_repo rm -rf $CVSROOT_DIRNAME/rcs5
	  ;;



	lockfiles)
	  # Tests of CVS lock files.
	  # TODO-maybe: Add a test where we arrange for a loginfo
	  # script (or some such) to ensure that locks are in place
	  # so then we can see how they are behaving.

	  if $proxy; then
	    # don't even try
	    continue
	  fi

	  mkdir 1; cd 1
	  mkdir sdir
	  mkdir sdir/ssdir
	  echo file >sdir/ssdir/file1
	  dotest lockfiles-1 \
"${testcvs} -Q import -m import-it first-dir bar baz" ""
	  cd ..

	  mkdir 2; cd 2
	  dotest lockfiles-2 "${testcvs} -q co first-dir" \
"U first-dir/sdir/ssdir/file1"
	  dotest lockfiles-3 "${testcvs} -Q co CVSROOT" ""
	  cd CVSROOT
	  echo "LockDir=${TESTDIR}/locks" >>config
	  dotest lockfiles-4 "${testcvs} -q ci -m config-it" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	  cd ../first-dir/sdir/ssdir
	  # The error message appears twice because Lock_Cleanup only
	  # stops recursing after the first attempt.
	  dotest_fail lockfiles-5 "${testcvs} -q update" \
"${SPROG} \[update aborted\]: cannot stat ${TESTDIR}/locks: No such file or directory"
	  mkdir ${TESTDIR}/locks
	  # Grumble, mumble.  Cygwin.
	  if test -n "$remotehost"; then
	    $CVS_RSH $remotehost "chmod u=rwx,g=r,o= ${TESTDIR}/locks"
	  else
	    chmod u=rwx,g=r,o= ${TESTDIR}/locks
	  fi
	  save_umask=`umask`
	  umask 0077
	  CVSUMASK=0077; export CVSUMASK
	  dotest lockfiles-6 "${testcvs} -q update" ""
	  # TODO: should also be testing that CVS continues to honor the
	  # umask and CVSUMASK normally.  In the case of the umask, CVS
	  # doesn't seem to use it for much (although it perhaps should).
	  dotest lockfiles-7 "ls ${TESTDIR}/locks/first-dir/sdir/ssdir" ""

	  # The policy is that when CVS creates new lock directories, they
	  # inherit the permissions from the parent directory.  CVSUMASK
	  # isn't right, because typically the reason for LockDir is to
	  # use a different set of permissions.
	  #
	  # Bah!  Cygwin!
	  if test -n "$remotehost"; then
	    dotest lockfiles-7a "$CVS_RSH $remotehost 'ls -ld ${TESTDIR}/locks/first-dir'" \
"drwxr-----.*first-dir"
	    dotest lockfiles-7b "$CVS_RSH $remotehost 'ls -ld ${TESTDIR}/locks/first-dir/sdir/ssdir'" \
"drwxr-----.*first-dir/sdir/ssdir"
	  else
	    dotest lockfiles-7a "ls -ld ${TESTDIR}/locks/first-dir" \
"drwxr-----.*first-dir"
	    dotest lockfiles-7b "ls -ld ${TESTDIR}/locks/first-dir/sdir/ssdir" \
"drwxr-----.*first-dir/sdir/ssdir"
	  fi

	  cd ../../..
	  dotest lockfiles-8 "${testcvs} -q update" ""
	  dotest lockfiles-9 "${testcvs} -q co -l ." ""

	  ###
	  ### There are race conditions in the following tests, but hopefully
	  ### the 5 seconds the first process waits to remove the lockdir and
	  ### the 30 seconds CVS waits betweens checks will be significant
	  ### enough to render the case moot.
	  ###
	  # Considers the following cases:
	  #
	  #                    Lock Present
	  # Operation          Allowed (case #)
	  #
	  #                    Read      Promotable   Write
	  #                    _______   __________   ______
	  # Read              |Yes (1)   Yes (2)      No (3)
	  # Promotable Read   |Yes (4)   No (5)       No (6)
	  # Write             |No (7)    No (8)       No (9)
	  #
	  # Tests do not appear in same ordering as table:
	  # 1. Read when read locks are present...
	  # 2. Read when promotable locks are present...
	  # 3. Don't read when write locks present...
	  # 4. Read but don't write when read locks are present... (fail
	  #    commit up-to-date check with promotable lock present).
	  # 5. Don't allow promotable read when promotable locks are present...
	  #    (fail to perform commit up-to-date check with promotable lock
	  #     present).
	  # 6. Don't allow promotable read when write locks are present...
	  #    (fail to perform commit up-to-date check with promotable lock
	  #     present).
	  # 7. Don't write when read locks are present...
	  # 8. Don't write when promotable locks are present...
	  # 9. Don't write when write locks are present...

	  # 3. Don't read when write locks present...
	  mkdir "$TESTDIR/locks/first-dir/#cvs.lock"
	  (sleep 5; rmdir "$TESTDIR/locks/first-dir/#cvs.lock")&
	  dotest lockfiles-10 "$testcvs -q co -l first-dir" \
"$SPROG checkout: \[[0-9:]*\] waiting for $username's lock in $CVSROOT_DIRNAME/first-dir
$SPROG checkout: \[[0-9:]*\] obtained lock in $CVSROOT_DIRNAME/first-dir"

	  # 1. Read when read locks are present...
	  touch "$TESTDIR/locks/first-dir/#cvs.rfl.test.lock"
	  dotest lockfiles-11 "$testcvs -q co -l first-dir"
	  rm "$TESTDIR/locks/first-dir/#cvs.rfl.test.lock"

	  # 2. Read when promotable locks are present...
	  cd ..
	  mkdir 3; cd 3
	  touch "$TESTDIR/locks/first-dir/sdir/ssdir/#cvs.pfl.test.lock"
	  dotest lockfiles-12 "$testcvs -q co first-dir" \
"U first-dir/sdir/ssdir/file1"
	  rm "$TESTDIR/locks/first-dir/sdir/ssdir/#cvs.pfl.test.lock"

	  # 7. Don't write when read locks are present...
	  echo I always have trouble coming up with witty text for the test files >>first-dir/sdir/ssdir/file1
	  touch "$TESTDIR/locks/first-dir/sdir/ssdir/#cvs.rfl.test.lock"
	  (sleep 5; rm "$TESTDIR/locks/first-dir/sdir/ssdir/#cvs.rfl.test.lock")&
	  dotest lockfiles-13 "$testcvs -q ci -mconflict first-dir" \
"$SPROG commit: \[[0-9:]*\] waiting for $username's lock in $CVSROOT_DIRNAME/first-dir/sdir/ssdir
$SPROG commit: \[[0-9:]*\] obtained lock in $CVSROOT_DIRNAME/first-dir/sdir/ssdir
$CVSROOT_DIRNAME/first-dir/sdir/ssdir/file1,v  <--  first-dir/sdir/ssdir/file1
new revision: 1\.2; previous revision: 1\.1"

	  # 4. Read but don't write when read locks are present... (fail
	  #    commit up-to-date check with promotable lock present).
	  cd ../2
	  echo something that would render readers all full of smiles >>first-dir/sdir/ssdir/file1
	  touch "$TESTDIR/locks/first-dir/sdir/ssdir/#cvs.rfl.test.lock"
	  dotest_fail lockfiles-14 "$testcvs -q ci -mnot-up-to-date first-dir" \
"$SPROG commit: Up-to-date check failed for \`first-dir/sdir/ssdir/file1'
$SPROG \[commit aborted\]: correct above errors first!"
	  rm "$TESTDIR/locks/first-dir/sdir/ssdir/#cvs.rfl.test.lock"

	  # 5. Don't allow promotable read when promotable locks are present...
	  #    (fail to perform commit up-to-date check with promotable lock
	  #     present).
	  touch "$TESTDIR/locks/first-dir/sdir/ssdir/#cvs.pfl.test.lock"
	  (sleep 5; rm "$TESTDIR/locks/first-dir/sdir/ssdir/#cvs.pfl.test.lock")&
	  dotest_fail lockfiles-15 "$testcvs -q ci -mnot-up-to-date first-dir" \
"$SPROG commit: \[[0-9:]*\] waiting for $username's lock in $CVSROOT_DIRNAME/first-dir/sdir/ssdir
$SPROG commit: \[[0-9:]*\] obtained lock in $CVSROOT_DIRNAME/first-dir/sdir/ssdir
$SPROG commit: Up-to-date check failed for \`first-dir/sdir/ssdir/file1'
$SPROG \[commit aborted\]: correct above errors first!"

	  # 6. Don't allow promotable read when write locks are present...
	  #    (fail to perform commit up-to-date check with promotable lock
	  #     present).
	  mkdir "$TESTDIR/locks/first-dir/sdir/ssdir/#cvs.lock"
	  (sleep 5; rmdir "$TESTDIR/locks/first-dir/sdir/ssdir/#cvs.lock")&
	  dotest_fail lockfiles-16 "$testcvs -q ci -mnot-up-to-date first-dir" \
"$SPROG commit: \[[0-9:]*\] waiting for $username's lock in $CVSROOT_DIRNAME/first-dir/sdir/ssdir
$SPROG commit: \[[0-9:]*\] obtained lock in $CVSROOT_DIRNAME/first-dir/sdir/ssdir
$SPROG commit: Up-to-date check failed for \`first-dir/sdir/ssdir/file1'
$SPROG \[commit aborted\]: correct above errors first!"

	  # 8. Don't write when promotable locks are present...
	  dotest lockfiles-17 "$testcvs -Q up -C first-dir/sdir/ssdir"
	  echo the kinds of smiles that light faces for miles >>first-dir/sdir/ssdir/file1
	  touch "$TESTDIR/locks/first-dir/sdir/ssdir/#cvs.pfl.test.lock"
	  (sleep 5; rm "$TESTDIR/locks/first-dir/sdir/ssdir/#cvs.pfl.test.lock")&
	  dotest lockfiles-18 "$testcvs -q ci -mnot-up-to-date first-dir" \
"$SPROG commit: \[[0-9:]*\] waiting for $username's lock in $CVSROOT_DIRNAME/first-dir/sdir/ssdir
$SPROG commit: \[[0-9:]*\] obtained lock in $CVSROOT_DIRNAME/first-dir/sdir/ssdir
$CVSROOT_DIRNAME/first-dir/sdir/ssdir/file1,v  <--  first-dir/sdir/ssdir/file1
new revision: 1\.3; previous revision: 1\.2"

	  # 9. Don't write when write locks are present...
	  echo yet this poem would probably only give longfellow bile >>first-dir/sdir/ssdir/file1
	  mkdir "$TESTDIR/locks/first-dir/sdir/ssdir/#cvs.lock"
	  (sleep 5; rmdir "$TESTDIR/locks/first-dir/sdir/ssdir/#cvs.lock")&
	  dotest lockfiles-19 "$testcvs -q ci -mnot-up-to-date first-dir" \
"$SPROG commit: \[[0-9:]*\] waiting for $username's lock in $CVSROOT_DIRNAME/first-dir/sdir/ssdir
$SPROG commit: \[[0-9:]*\] obtained lock in $CVSROOT_DIRNAME/first-dir/sdir/ssdir
$CVSROOT_DIRNAME/first-dir/sdir/ssdir/file1,v  <--  first-dir/sdir/ssdir/file1
new revision: 1\.4; previous revision: 1\.3"

	  # 10. Don't write when history locks are present...
	  echo have you ever heard a poem quite so vile\? >>first-dir/sdir/ssdir/file1
	  mkdir "$TESTDIR/locks/CVSROOT/#cvs.history.lock"
	  (sleep 5; rmdir "$TESTDIR/locks/CVSROOT/#cvs.history.lock")&
	  dotest lockfiles-20 "$testcvs -q ci -mnot-up-to-date first-dir" \
"$CVSROOT_DIRNAME/first-dir/sdir/ssdir/file1,v  <--  first-dir/sdir/ssdir/file1
new revision: 1\.5; previous revision: 1\.4
$SPROG commit: \[[0-9:]*\] waiting for $username's lock in $CVSROOT_DIRNAME/CVSROOT
$SPROG commit: \[[0-9:]*\] obtained lock in $CVSROOT_DIRNAME/CVSROOT"

	  dotest lockfiles-21 "$testcvs -Q tag newtag first-dir"

	  rm $CVSROOT_DIRNAME/CVSROOT/val-tags
	  mkdir "$TESTDIR/locks/CVSROOT/#cvs.val-tags.lock"
	  (sleep 5; rmdir "$TESTDIR/locks/CVSROOT/#cvs.val-tags.lock")&
	  dotest lockfiles-22 "$testcvs -q up -r newtag first-dir" \
"$SPROG update: \[[0-9:]*\] waiting for $username's lock in $CVSROOT_DIRNAME/CVSROOT
$SPROG update: \[[0-9:]*\] obtained lock in $CVSROOT_DIRNAME/CVSROOT"

	  cd CVSROOT
	  dotest lockfiles-cleanup-1 "$testcvs -q up -pr1.1 config >config" ""
	  dotest lockfiles-cleanup-2 "$testcvs -q ci -m config-it" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	  dokeep
	  cd ../..
	  # Restore umask.
	  umask $save_umask
	  unset CVSUMASK
	  rm -r $TESTDIR/locks
	  rm -r 1 2 3
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	backuprecover)
	  # Tests to make sure we get the expected behavior
	  # when we recover a repository from an old backup
	  #
	  # Details:
	  #   Backup will be older than some developer's workspaces
	  #	This means the first attempt at an update will fail
	  #	The workaround for this is to replace the CVS
	  #	  directories with those from a "new" checkout from
	  #	  the recovered repository.  Due to this, multiple
	  #	  merges should cause conflicts (the same data
	  #	  will be merged more than once).
	  #	A workspace updated before the date of the recovered
	  #	  copy will not need any extra attention
	  #
	  # Note that backuprecover-15 is probably a failure case
	  #   If nobody else had a more recent update, the data would be lost
	  #	permanently
	  #   Granted, the developer should have been notified not to do this
	  #	by now, but still...
	  #
	  mkdir backuprecover; cd backuprecover
	  mkdir 1; cd 1
	  dotest backuprecover-1 "$testcvs -q co -l ."
	  mkdir first-dir
	  dotest backuprecover-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
          cd first-dir
	  mkdir dir
	  dotest backuprecover-3 "${testcvs} add dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir/dir added to the repository"
	  touch file1 dir/file2
	  dotest backuprecover-4 "${testcvs} -q add file1 dir/file2" \
"${SPROG} add: use \`${SPROG} commit' to add these files permanently"
	  dotest backuprecover-5 "${testcvs} -q ci -mtest" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/dir/file2,v  <--  dir/file2
initial revision: 1\.1"
	  echo "Line one" >>file1
	  echo "  is the place" >>file1
	  echo "    we like to begin" >>file1
	  echo "Anything else" >>file1
	  echo "  looks like" >>file1
	  echo "    a sin" >>file1
	  echo "File 2" >>dir/file2
	  echo "  is the place" >>dir/file2
	  echo "    the rest of it goes"  >>dir/file2
	  echo "Why I don't use" >>dir/file2
	  echo "  something like 'foo'" >>dir/file2
	  echo "    God only knows" >>dir/file2
	  dotest backuprecover-6 "${testcvs} -q ci -mtest" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/dir/file2,v  <--  dir/file2
new revision: 1\.2; previous revision: 1\.1"

	  # Simulate the lazy developer
	  # (he did some work but didn't check it in...)
	  cd ../..
	  mkdir 2; cd 2
	  dotest backuprecover-7 "${testcvs} -Q co first-dir" ''
	  cd first-dir
	  sed -e "s/looks like/just looks like/" file1 >tmp; mv tmp file1
	  sed -e "s/don't use/don't just use/" dir/file2 >tmp; mv tmp dir/file2

	  # developer 1 is on a roll
	  cd ../../1/first-dir
	  echo "I need some more words" >>file1
	  echo "  to fill up this space" >>file1
	  echo "    anything else would be a disgrace" >>file1
	  echo "My rhymes cross many boundries" >>dir/file2
	  echo "  this time it's files" >>dir/file2
	  echo "    a word that fits here would be something like dials" >>dir/file2
	  dotest backuprecover-8 "${testcvs} -q ci -mtest" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.3; previous revision: 1\.2
$CVSROOT_DIRNAME/first-dir/dir/file2,v  <--  dir/file2
new revision: 1\.3; previous revision: 1\.2"

	  # Save a backup copy
	  cp -R $CVSROOT_DIRNAME/first-dir $TESTDIR/backup

	  # Simulate developer 3
	  cd ../..
	  mkdir 3; cd 3
	  dotest backuprecover-9a "${testcvs} -Q co first-dir" ''
	  cd first-dir
	  echo >>file1
	  echo >>dir/file2
	  echo "Developer 1 makes very lame rhymes" >>file1
	  echo "  I think he should quit and become a mime" >>file1
	  echo "What the %*^# kind of rhyme crosses a boundry?" >>dir/file2
	  echo "  I think you should quit and get a job in the foundry" >>dir/file2
	  dotest backuprecover-9b "${testcvs} -q ci -mtest" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.4; previous revision: 1\.3
$CVSROOT_DIRNAME/first-dir/dir/file2,v  <--  dir/file2
new revision: 1\.4; previous revision: 1\.3"

	  # Developer 4 so we can simulate a conflict later...
	  cd ../..
	  mkdir 4; cd 4
	  dotest backuprecover-10 "${testcvs} -Q co first-dir" ''
	  cd first-dir
	  sed -e "s/quit and/be fired so he can/" dir/file2 >tmp; mv tmp dir/file2

	  # And back to developer 1
	  cd ../../1/first-dir
	  dotest backuprecover-11 "${testcvs} -Q update" ''
	  echo >>file1
	  echo >>dir/file2
	  echo "Oh yeah, well rhyme this" >>file1
	  echo "  developer three" >>file1
	  echo "    you want opposition" >>file1
	  echo "      you found some in me!" >>file1
	  echo "I'll give you mimes" >>dir/file2
	  echo "  and foundries galore!"  >>dir/file2
	  echo "    your head will spin" >>dir/file2
	  echo "      once you find what's in store!" >>dir/file2
	  dotest backuprecover-12 "${testcvs} -q ci -mtest" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.5; previous revision: 1\.4
$CVSROOT_DIRNAME/first-dir/dir/file2,v  <--  dir/file2
new revision: 1\.5; previous revision: 1\.4"

	  # developer 3'll do a bit of work that never gets checked in
	  cd ../../3/first-dir
	  dotest backuprecover-13 "${testcvs} -Q update" ''
	  sed -e "s/very/some extremely/" file1 >tmp; mv tmp file1
	  dotest backuprecover-14 "${testcvs} -q ci -mtest" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.6; previous revision: 1\.5"
	  echo >>file1
	  echo "Tee hee hee hee" >>file1
	  echo >>dir/file2
	  echo "Find what's in store?" >>dir/file2
	  echo "  Oh, I'm so sure!" >>dir/file2
	  echo "    You've got an ill, and I have the cure!"  >>dir/file2

	  # Slag the original and restore it a few revisions back
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  modify_repo mv $TESTDIR/backup $CVSROOT_DIRNAME/first-dir

	  # Have developer 1 try an update and lose some data
	  #
	  # Feel free to imagine the horrific scream of despair
	  cd ../../1/first-dir
	  dotest backuprecover-15 "${testcvs} update" \
"${SPROG} update: Updating .
U file1
${SPROG} update: Updating dir
U dir/file2"

	  # Developer 3 tries the same thing (he has an office)
	  # but fails without losing data since all of his files have
	  # uncommitted changes
	  cd ../../3/first-dir
	  dotest_fail backuprecover-16 "${testcvs} update" \
"${SPROG} update: Updating \.
${SPROG} \[update aborted\]: could not find desired version 1\.6 in ${CVSROOT_DIRNAME}/first-dir/file1,v"

	  # create our workspace fixin' script
	  cd ../..
	  echo \
"#!$TESTSHELL

# This script will copy the CVS database dirs from the checked out
# version of a newly recovered repository and replace the CVS
# database dirs in a workspace with later revisions than those in the
# recovered repository
cd repos-first-dir
DATADIRS=\`find . -name CVS -print\`
cd ../first-dir
find . -name CVS -print | xargs rm -rf
for file in \${DATADIRS}; do
	cp -R ../repos-first-dir/\${file} \${file}
done" >fixit

	  # We only need to fix the workspaces of developers 3 and 4
	  # (1 lost all her data and 2 has an update date from
	  # before the date the backup was made)
	  cd 3
	  dotest backuprecover-17 \
		"${testcvs} -Q co -d repos-first-dir first-dir" ''
	  cd ../4
	  dotest backuprecover-18 \
		"${testcvs} -Q co -d repos-first-dir first-dir" ''
	  sh ../fixit
	  cd ../3; sh ../fixit

	  # (re)commit developer 3's stuff
	  cd first-dir
	  dotest backuprecover-19 "${testcvs} -q ci -mrecover/merge" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.4; previous revision: 1\.3
$CVSROOT_DIRNAME/first-dir/dir/file2,v  <--  dir/file2
new revision: 1\.4; previous revision: 1\.3"

	  # and we should get a conflict on developer 4's stuff
	  cd ../../4/first-dir
	  dotest backuprecover-20 "${testcvs} update" \
"${SPROG} update: Updating \.
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.3
retrieving revision 1\.4
Merging differences between 1\.3 and 1\.4 into file1
rcsmerge: warning: conflicts during merge
${SPROG} update: conflicts found in file1
C file1
${SPROG} update: Updating dir
RCS file: ${CVSROOT_DIRNAME}/first-dir/dir/file2,v
retrieving revision 1\.3
retrieving revision 1\.4
Merging differences between 1\.3 and 1\.4 into file2
rcsmerge: warning: conflicts during merge
${SPROG} update: conflicts found in dir/file2
C dir/file2"
	  sed -e \
"/^<<<<<<</,/^=======/d
/^>>>>>>>/d" file1 >tmp; mv tmp file1
	  sed -e \
"/^<<<<<<</,/^=======/d
/^>>>>>>>/d
s/quit and/be fired so he can/" dir/file2 >tmp; mv tmp dir/file2
	  dotest backuprecover-21 "${testcvs} -q ci -mrecover/merge" \
"$CVSROOT_DIRNAME/first-dir/dir/file2,v  <--  dir/file2
new revision: 1\.5; previous revision: 1\.4"

	  # go back and commit developer 2's stuff to prove it can still be done
	  cd ../../2/first-dir
	  dotest backuprecover-22 "${testcvs} -Q update" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.2
retrieving revision 1\.4
Merging differences between 1\.2 and 1\.4 into file1
RCS file: ${CVSROOT_DIRNAME}/first-dir/dir/file2,v
retrieving revision 1\.2
retrieving revision 1\.5
Merging differences between 1\.2 and 1\.5 into file2"
	  dotest backuprecover-23 "${testcvs} -q ci -mtest" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.5; previous revision: 1\.4
$CVSROOT_DIRNAME/first-dir/dir/file2,v  <--  dir/file2
new revision: 1\.6; previous revision: 1\.5"

	  # and restore the data to developer 1
	  cd ../../1/first-dir
	  dotest backuprecover-24 "${testcvs} -Q update" ''

	  dokeep
	  cd ../../..
	  rm -r backuprecover
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



        sshstdio)
          # CVS_RSH=ssh can have a problem with a non-blocking stdio
          # in some cases. So, this test is all about testing :ext:
          # with CVS_RSH=ssh. The problem is that not all machines
          # will necessarily have ssh available, so be prepared to
          # skip this test.

	  if $proxy; then
            notproxy sshstdio
	    continue
	  fi

          if $remote; then :; else
            remoteonly sshstdio
	    continue
	  fi

	  require_ssh
	  if test $? -eq 77; then
            skip sshstdio "$skipreason"
	    continue
	  fi

	  SSHSTDIO_ROOT=:ext:$host$CVSROOT_DIRNAME

          mkdir sshstdio; cd sshstdio
          dotest sshstdio-1 "$testcvs -d $SSHSTDIO_ROOT -q co -l ."
          mkdir first-dir
          dotest sshstdio-2 "$testcvs add first-dir" \
  "Directory $CVSROOT_DIRNAME/first-dir added to the repository"
          cd first-dir
          a='aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa'
          c='aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaacaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa'
          # Generate 1024 lines of $a
          cnt=0
          echo $a > aaa
          while [ $cnt -lt 5 ] ; do
            cnt=`expr $cnt + 1` ;
            mv aaa aaa.old
            cat aaa.old aaa.old aaa.old aaa.old > aaa
          done
          dotest sshstdio-3 "$testcvs -q add aaa" \
"$SPROG add: use .$SPROG commit. to add this file permanently"
          dotest sshstdio-4 "$testcvs -q ci -mcreate aaa" \
"$CVSROOT_DIRNAME/first-dir/aaa,v  <--  aaa
initial revision: 1\.1"
          # replace lines 1, 512, 513, 1024 with $c
          sed 510q < aaa > aaa.old
          (echo $c; cat aaa.old; echo $c; \
           echo $c; cat aaa.old; echo $c) > aaa
          dotest sshstdio-5 "$testcvs -q ci -mmodify-it aaa" \
"$CVSROOT_DIRNAME/first-dir/aaa,v  <--  aaa
new revision: 1\.2; previous revision: 1\.1"
          cat > wrapper.sh <<EOF
#!$TESTSHELL
exec "\$@" 2>&1 < /dev/null | cat
EOF
          chmod +x wrapper.sh
          ./wrapper.sh \
           $testcvs -z5 -Q diff --side-by-side -W 500 -r 1.1 -r 1.2 \
             aaa > wrapper.dif
  
          $testcvs -z5 -Q diff --side-by-side -W 500 -r 1.1 -r 1.2 \
             aaa > good.dif
  
          dotest sshstdio-6 "cmp wrapper.dif good.dif"

	  dokeep
          cd ../..
          CVS_RSH=$save_CVS_RSH; export CVS_RSH
          rm -r sshstdio
          rm -rf $CVSROOT_DIRNAME/first-dir
          ;;



	parseroot2)
	  # Test some :ext: roots for consistancy.
	  if $remote; then :; else
	    remoteonly parseroot2
	    continue
	  fi

	  require_rsh "$CVS_RSH"
	  if test $? -eq 77; then
	    skip parseroot2 "$skipreason"
	    continue
	  fi

	  # Test checking out and subsequently updating with some different
	  # CVSROOTs.

	  # A standard case, hostname:dirname.
	  mkdir parseroot2; cd parseroot2
	  save_CVSROOT=$CVSROOT
	  CVSROOT=$host:$CVSROOT_DIRNAME
	  dotest parseroot2-1 "$testcvs -Q co CVSROOT"
	  cd CVSROOT
	  dotest parseroot2-2 "$testcvs -Q up"
	  cd ..

	  # A degenerate remote case, just the server name and the directory
	  # name, with no :'s to help parsing.  It can be mistaken for a
	  # relative directory name.
	  rm -r CVSROOT
	  CVSROOT=$host$CVSROOT_DIRNAME
	  dotest parseroot2-3 "$testcvs -Q co CVSROOT"
	  cd CVSROOT
	  dotest parseroot2-4 "$testcvs -Q up"

	  dokeep
	  cd ../..
	  CVSROOT=$save_CVSROOT
	  rm -r parseroot2
	  ;;



	parseroot3)
	  # Test some :ext: roots for consistancy.
	  if $remote; then :; else
	    remoteonly parseroot3
	    continue
	  fi

	  require_rsh "$CVS_RSH"
	  if test $? -eq 77; then
	    skip parseroot3 "$skipreason"
	    continue
	  fi

	  # Test checking out and subsequently updating with some different
	  # CVSROOTs.

	  # A standard case, hostname:dirname.
	  mkdir parseroot3; cd parseroot3
	  save_CVSROOT=$CVSROOT
	  save_CVS_RSH=$CVS_RSH
	  save_CVS_SERVER=$CVS_SERVER
	  unset CVS_RSH
	  unset CVS_SERVER
	  CVSROOT=":ext;CVS_RSH=$save_CVS_RSH;CVS_SERVER=$save_CVS_SERVER:$host:$CVSROOT_DIRNAME"
	  dotest parseroot3-1 "$testcvs -Q co CVSROOT"
	  cd CVSROOT
	  dotest parseroot3-2 "$testcvs -Q up"
	  cd ..

	  # Initial checkout.
	  rm -r CVSROOT
	  CVSROOT=":ext;cvs_RSH=$save_CVS_RSH;CVS_Server=$save_CVS_SERVER:$host$CVSROOT_DIRNAME"
	  dotest parseroot3-3 "$testcvs -Q co CVSROOT"
	  cd CVSROOT
	  dotest parseroot3-4 "$testcvs -Q up"
	  cd ..

	  # Checkout bogus values for Redirect
	  rm -r CVSROOT
	  CVSROOT=":ext;Redirect=bogus;CVS_RSH=$save_CVS_RSH;CVS_SERVER=$save_CVS_SERVER:$host$CVSROOT_DIRNAME"
	  dotest parseroot3-5 "$testcvs -Q co CVSROOT" \
"$SPROG checkout: CVSROOT: unrecognized value \`bogus' for \`Redirect'"
	  cd CVSROOT
	  # FIXCVS: parse_cvsroot is called more often that is
	  # desirable.	  
	  dotest parseroot3-6 "$testcvs -Q up" \
"$SPROG update: CVSROOT: unrecognized value \`bogus' for \`Redirect'"
	  cd ..

	  # Checkout good values for Redirect
	  rm -r CVSROOT
	  CVSROOT=":EXT;Redirect=no;CVS_RSH=$save_CVS_RSH;CVS_SERVER=$save_CVS_SERVER:$host$CVSROOT_DIRNAME"
	  dotest parseroot3-7 "$testcvs -Q co CVSROOT"
	  cd CVSROOT
	  dotest parseroot3-8 "$testcvs -Q up"
	  cd ..

	  dotest parseroot3-9 "$testcvs -Q co -ldtop ."
	  dotest parseroot3-10 "test -d top"
	  dotest parseroot3-11 "test -d top/CVS"
	  dotest parseroot3-10 "cat top/CVS/Root" "$CVSROOT"

	  dokeep
	  cd ..
	  CVSROOT=$save_CVSROOT
	  CVS_RSH=$save_CVS_RSH
	  CVS_SERVER=$save_CVS_SERVER
	  export CVS_RSH CVS_SERVER
	  rm -r parseroot3
	  ;;



	history)
	  # CVSROOT/history tests:
	  # history: various "cvs history" invocations
	  # basic2: Generating the CVSROOT/history file via CVS commands.

	  # Put in some data for the history file (discarding what was
	  # there before).  Note that this file format is fixed; the
	  # user may wish to analyze data from a previous version of
	  # CVS.  If we phase out this format, it should be done
	  # slowly and carefully.

	  if $proxy; then
	    # don't even try
	    continue
	  fi

	  cat <<EOF >$CVSROOT_DIRNAME/CVSROOT/history
O3395c677|anonymous|<remote>/*0|ccvs||ccvs
O3396c677|anonymous|<remote>/src|ccvs||src
O3397c677|kingdon|<remote>/*0|ccvs||ccvs
M339cafae|nk|<remote>|ccvs/src|1.229|sanity.sh
M339cafff|anonymous|<remote>|ccvs/src|1.23|Makefile
M339dc339|kingdon|~/work/*0|ccvs/src|1.231|sanity.sh
W33a6eada|anonymous|<remote>*4|ccvs/emx||Makefile.in
C3b235f50|kingdon|<remote>|ccvs/emx|1.3|README
M3b23af50|kingdon|~/work/*0|ccvs/doc|1.281|cvs.texinfo
EOF

	  dotest history-1 "${testcvs} history -e -a" \
"O 1997-06-04 19:48 ${PLUS}0000 anonymous ccvs     =ccvs= <remote>/\*
O 1997-06-05 14:00 ${PLUS}0000 anonymous ccvs     =src=  <remote>/\*
M 1997-06-10 01:38 ${PLUS}0000 anonymous 1\.23  Makefile    ccvs/src == <remote>
W 1997-06-17 19:51 ${PLUS}0000 anonymous       Makefile\.in ccvs/emx == <remote>/emx
O 1997-06-06 08:12 ${PLUS}0000 kingdon   ccvs     =ccvs= <remote>/\*
M 1997-06-10 21:12 ${PLUS}0000 kingdon   1\.231 sanity\.sh   ccvs/src == ~/work/ccvs/src
C 2001-06-10 11:51 ${PLUS}0000 kingdon   1\.3   README      ccvs/emx == <remote>
M 2001-06-10 17:33 ${PLUS}0000 kingdon   1\.281 cvs\.texinfo ccvs/doc == ~/work/ccvs/doc
M 1997-06-10 01:36 ${PLUS}0000 nk        1\.229 sanity\.sh   ccvs/src == <remote>"

	  dotest history-2 "${testcvs} history -e -a -D '10 Jun 1997 13:00 UT'" \
"W 1997-06-17 19:51 ${PLUS}0000 anonymous       Makefile\.in ccvs/emx == <remote>/emx
M 1997-06-10 21:12 ${PLUS}0000 kingdon   1\.231 sanity\.sh   ccvs/src == ~/work/ccvs/src
C 2001-06-10 11:51 ${PLUS}0000 kingdon   1\.3   README      ccvs/emx == <remote>
M 2001-06-10 17:33 ${PLUS}0000 kingdon   1\.281 cvs\.texinfo ccvs/doc == ~/work/ccvs/doc"

	  dotest history-3 "${testcvs} history -e -a -D '10 Jun 2001 13:00 UT'" \
"M 2001-06-10 17:33 ${PLUS}0000 kingdon 1\.281 cvs\.texinfo ccvs/doc == ~/work/ccvs/doc"

	  dotest history-4 "${testcvs} history -ac sanity.sh" \
"M 1997-06-10 21:12 ${PLUS}0000 kingdon 1\.231 sanity\.sh ccvs/src == ~/work/ccvs/src
M 1997-06-10 01:36 ${PLUS}0000 nk      1\.229 sanity\.sh ccvs/src == <remote>"

	  dotest history-5 "${testcvs} history -a -xCGUWAMR README sanity.sh" \
"M 1997-06-10 21:12 ${PLUS}0000 kingdon 1\.231 sanity\.sh ccvs/src == ~/work/ccvs/src
C 2001-06-10 11:51 ${PLUS}0000 kingdon 1\.3   README    ccvs/emx == <remote>
M 1997-06-10 01:36 ${PLUS}0000 nk      1\.229 sanity\.sh ccvs/src == <remote>"

	  dotest history-6 "${testcvs} history -xCGUWAMR -a -f README -f sanity.sh" \
"M 1997-06-10 21:12 ${PLUS}0000 kingdon 1\.231 sanity\.sh ccvs/src == ~/work/ccvs/src
C 2001-06-10 11:51 ${PLUS}0000 kingdon 1\.3   README    ccvs/emx == <remote>
M 1997-06-10 01:36 ${PLUS}0000 nk      1\.229 sanity\.sh ccvs/src == <remote>"

	  dotest history-7 "${testcvs} history -xCGUWAMR -a -f sanity.sh README" \
"M 1997-06-10 21:12 ${PLUS}0000 kingdon 1\.231 sanity\.sh ccvs/src == ~/work/ccvs/src
C 2001-06-10 11:51 ${PLUS}0000 kingdon 1\.3   README    ccvs/emx == <remote>
M 1997-06-10 01:36 ${PLUS}0000 nk      1\.229 sanity\.sh ccvs/src == <remote>"

	  dotest history-8 "${testcvs} history -ca -D '1970-01-01 00:00 UT'" \
"M 1997-06-10 01:36 ${PLUS}0000 nk        1\.229 sanity.sh   ccvs/src == <remote>
M 1997-06-10 01:38 ${PLUS}0000 anonymous 1\.23  Makefile    ccvs/src == <remote>
M 1997-06-10 21:12 ${PLUS}0000 kingdon   1\.231 sanity.sh   ccvs/src == ~/work/ccvs/src
M 2001-06-10 17:33 ${PLUS}0000 kingdon   1\.281 cvs.texinfo ccvs/doc == ~/work/ccvs/doc"

	  dotest history-9 "${testcvs} history -acl" \
"M 2001-06-10 17:33 ${PLUS}0000 kingdon   1\.281 cvs.texinfo ccvs/doc == ~/work/ccvs/doc
M 1997-06-10 01:38 ${PLUS}0000 anonymous 1\.23  Makefile    ccvs/src == <remote>
M 1997-06-10 21:12 ${PLUS}0000 kingdon   1\.231 sanity.sh   ccvs/src == ~/work/ccvs/src"

	  dotest history-10 "${testcvs} history -lca -D '1970-01-01 00:00 UT'" \
"M 2001-06-10 17:33 ${PLUS}0000 kingdon   1\.281 cvs.texinfo ccvs/doc == ~/work/ccvs/doc
M 1997-06-10 01:38 ${PLUS}0000 anonymous 1\.23  Makefile    ccvs/src == <remote>
M 1997-06-10 21:12 ${PLUS}0000 kingdon   1\.231 sanity.sh   ccvs/src == ~/work/ccvs/src"

	  dotest history-11 "${testcvs} history -aw" \
"O 1997-06-04 19:48 ${PLUS}0000 anonymous ccvs =ccvs= <remote>/\*
O 1997-06-05 14:00 ${PLUS}0000 anonymous ccvs =src=  <remote>/\*
O 1997-06-06 08:12 ${PLUS}0000 kingdon   ccvs =ccvs= <remote>/\*"

	  dotest history-12 "${testcvs} history -aw -D'1970-01-01 00:00 UT'" \
"O 1997-06-04 19:48 ${PLUS}0000 anonymous ccvs =ccvs= <remote>/\*
O 1997-06-05 14:00 ${PLUS}0000 anonymous ccvs =src=  <remote>/\*
O 1997-06-06 08:12 ${PLUS}0000 kingdon   ccvs =ccvs= <remote>/\*"
	  ;;



	big)

	  # Test ability to operate on big files.  Intention is to
	  # test various realloc'ing code in RCS_deltas, rcsgetkey,
	  # etc.  "big" is currently defined to be 1000 lines (64000
	  # bytes), which in terms of files that users will use is not
	  # large, merely average, but my reasoning is that this
	  # should be big enough to make sure realloc'ing is going on
	  # and that raising it a lot would start to stress resources
	  # on machines which run the tests, without any significant
	  # benefit.

	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  dotest big-1 "$testcvs -q co first-dir"
	  cd first-dir
	  for i in 0 1 2 3 4 5 6 7 8 9; do
	    for j in 0 1 2 3 4 5 6 7 8 9; do
	      for k in 0 1 2 3 4 5 6 7 8 9; do
		echo \
"This is line ($i,$j,$k) which goes into the file file1 for testing" >>file1
	      done
	    done
	  done
	  dotest big-2 "$testcvs add file1" \
"$SPROG add: scheduling file .file1. for addition
$SPROG add: use .$SPROG commit. to add this file permanently"
	  dotest big-3 "$testcvs -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  cd ..
	  mkdir 2
	  cd 2
	  dotest big-4 "$testcvs -q get first-dir" "U first-dir/file1"
	  cd ../first-dir
	  echo "add a line to the end" >>file1

	  dotest_fail big-4b "$testcvs -q diff -u" \
"Index: file1
===================================================================
RCS file: $CVSROOT_DIRNAME/first-dir/file1,v
retrieving revision 1\.1
diff -u -r1\.1 file1
--- file1	$RFCDATE	1\.1
$PLUS$PLUS$PLUS file1	$RFCDATE
@@ -998,3 ${PLUS}998,4 @@
 This is line (9,9,7) which goes into the file file1 for testing
 This is line (9,9,8) which goes into the file file1 for testing
 This is line (9,9,9) which goes into the file file1 for testing
${PLUS}add a line to the end"

	  dotest big-5 "$testcvs -q ci -m modify" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1"
	  cd ../2/first-dir
	  # The idea here is particularly to test the Rcs-diff response
	  # and the reallocing thereof, for remote.
	  dotest big-6 "$testcvs -q update" "[UP] file1"

	  dokeep
	  cd ../..
	  rm -r first-dir 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	modes)
	  # Test repository permissions (CVSUMASK and so on).
	  # Although the tests in this section "cheat" by testing
	  # repository permissions, which are sort of not a user-visible
	  # sort of thing, the modes do have user-visible consequences,
	  # such as whether a second user can check out the files.  But
	  # it would be awkward to test the consequences, so we don't.

	  # Solaris /bin/sh doesn't support export -n.  I'm not sure
	  # what we can do about this, other than hope that whoever
	  # is running the tests doesn't have CVSUMASK set.
	  #export -n CVSUMASK # if unset, defaults to 002

	  save_umask=`umask`
	  umask 077
	  mkdir 1; cd 1
	  dotest modes-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest modes-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  touch aa
	  dotest modes-3 "${testcvs} add aa" \
"${SPROG} add: scheduling file .aa. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest modes-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/aa,v  <--  aa
initial revision: 1\.1"
	  # Yawn.  Cygwin.
	  if test -n "$remotehost"; then
	    dotest modes-5remotehost "$CVS_RSH $remotehost 'ls -l ${CVSROOT_DIRNAME}/first-dir/aa,v'" \
"-r--r--r-- .*"
	  else
	    dotest modes-5 "ls -l ${CVSROOT_DIRNAME}/first-dir/aa,v" \
"-r--r--r-- .*"
	  fi

	  # Test for whether we can set the execute bit.
	  chmod +x aa
	  echo change it >>aa
	  dotest modes-6 "${testcvs} -q ci -m set-execute-bit" \
"$CVSROOT_DIRNAME/first-dir/aa,v  <--  aa
new revision: 1\.2; previous revision: 1\.1"
	  # If CVS let us update the execute bit, it would be set here.
	  # But it doesn't, and as far as I know that is longstanding
	  # CVS behavior.
	  #
	  # Yeah, yeah.  Search for "Cygwin".
	  if test -n "$remotehost"; then
	    dotest modes-7remotehost "$CVS_RSH $remotehost 'ls -l ${CVSROOT_DIRNAME}/first-dir/aa,v'" \
"-r--r--r-- .*"
	  else
	    dotest modes-7 "ls -l ${CVSROOT_DIRNAME}/first-dir/aa,v" \
"-r--r--r-- .*"
	  fi

	  # OK, now manually change the modes and see what happens.
	  #
	  # Cygwin, already.
	  if test -n "$remotehost"; then
	    $CVS_RSH $remotehost "chmod g=r,o= ${CVSROOT_DIRNAME}/first-dir/aa,v"
	  else
	    chmod g=r,o= ${CVSROOT_DIRNAME}/first-dir/aa,v
	  fi
	  echo second line >>aa
	  dotest modes-7a "${testcvs} -q ci -m set-execute-bit" \
"$CVSROOT_DIRNAME/first-dir/aa,v  <--  aa
new revision: 1\.3; previous revision: 1\.2"
	  # Cygwin.
	  if test -n "$remotehost"; then
	    dotest modes-7bremotehost "$CVS_RSH $remotehost 'ls -l ${CVSROOT_DIRNAME}/first-dir/aa,v'" \
"-r--r----- .*"
	  else
	    dotest modes-7b "ls -l ${CVSROOT_DIRNAME}/first-dir/aa,v" \
"-r--r----- .*"
	  fi

	  CVSUMASK=007
	  export CVSUMASK
	  touch ab
	  # Might as well test the execute bit too.
	  chmod +x ab
	  dotest modes-8 "$testcvs add ab" \
"$SPROG add: scheduling file .ab. for addition
$SPROG add: use .$SPROG commit. to add this file permanently"
	  dotest modes-9 "$testcvs -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/ab,v  <--  ab
initial revision: 1\.1"

	  # The ssh-wrapper script set up by this script forwards CVSUMASK to
	  # the server.  In practice it would be set on the server in some
	  # other manner (for instance, by the `env' command, or as an option
	  # in the xinted.conf file).
	  #
	  # I don't recall why, but I used to look for:
	  #
	  #   dotest modes-10remotehost \
	  #   "$CVS_RSH $remotehost 'ls -l $CVSROOT_DIRNAME/first-dir/ab,v'" \
	  #   "-r--r--r--.*"
	  #
	  # here when $remotehost was set.  I'm not sure why.  Maybe this was
	  # one of the innumerable Cygwin issues?
	  dotest modes-10 "ls -l $CVSROOT_DIRNAME/first-dir/ab,v" \
"-r-xr-x---.*"

	  # OK, now add a file on a branch.  Check that the mode gets
	  # set the same way (it is a different code path in CVS).
	  dotest modes-11 "${testcvs} -q tag -b br" 'T aa
T ab'
	  dotest modes-12 "${testcvs} -q update -r br" ''
	  touch ac
	  dotest modes-13 "${testcvs} add ac" \
"${SPROG} add: scheduling file .ac. for addition on branch .br.
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  # Not sure it really makes sense to refer to a "previous revision"
	  # when we are just now adding the file; as far as I know
	  # that is longstanding CVS behavior, for what it's worth.
	  dotest modes-14 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/Attic/ac,v  <--  ac
new revision: 1\.1\.2\.1; previous revision: 1\.1"

	  # ssh-wrapper forwards CVSUMASK.  See modes-10 for notes.
	  dotest modes-15 \
"ls -l ${CVSROOT_DIRNAME}/first-dir/Attic/ac,v" \
"-r--r-----.*"

	  dokeep
	  cd ../..
	  # Restore umask.
	  umask $save_umask
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	modes2)
	  # More tests of file permissions in the working directory
	  # and that sort of thing.

	  # The usual setup, file first-dir/aa with two revisions.
	  mkdir 1; cd 1
	  dotest modes2-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest modes2-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  touch aa
	  dotest modes2-3 "${testcvs} add aa" \
"${SPROG} add: scheduling file .aa. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest modes2-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/aa,v  <--  aa
initial revision: 1\.1"
	  echo "more money" >> aa
	  dotest modes2-5 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/aa,v  <--  aa
new revision: 1\.2; previous revision: 1\.1"

	  # OK, here is the test.  The idea is to see what
	  # No_Difference does if it can't open the file.
	  # If we don't change the st_mtime, CVS doesn't even try to read
	  # the file.  Note that some versions of "touch" require that we
	  # do this while the file is still writable.
	  touch aa
	  chmod a= aa
	  # Don't try this when permissions are broken, as with Cygwin.
	  if ${LS} ${CVSROOT_DIRNAME}/first-dir >/dev/null 2>&1; then :; else
	    dotest_fail modes2-6 "${testcvs} -q update -r 1.1 aa" \
"${CPROG} \[update aborted\]: cannot open file aa for comparing: Permission denied" \
"${CPROG} \[update aborted\]: reading aa: Permission denied"
	  fi

	  dokeep
	  chmod u+rwx aa
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	modes3)
	  # Repository permissions.  Particularly, what happens if we
	  # can't read/write in the repository.
	  # TODO: the case where we can access the repository, just not
	  # the attic (may that one can remain a fatal error, seems less
	  # useful for access control).
	  mkdir 1; cd 1
	  dotest modes3-1 "$testcvs -q co -l ."
	  mkdir first-dir second-dir
	  dotest modes3-2 "${testcvs} add first-dir second-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository
Directory ${CVSROOT_DIRNAME}/second-dir added to the repository"
	  touch first-dir/aa second-dir/ab
	  dotest modes3-3 "${testcvs} add first-dir/aa second-dir/ab" \
"${SPROG} add: scheduling file .first-dir/aa. for addition
${SPROG} add: scheduling file .second-dir/ab. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  dotest modes3-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/aa,v  <--  first-dir/aa
initial revision: 1\.1
$CVSROOT_DIRNAME/second-dir/ab,v  <--  second-dir/ab
initial revision: 1\.1"
	  # quiet down this one as it will be noisy in proxy mode
	  modify_repo chmod a= $CVSROOT_DIRNAME/first-dir >/dev/null 2>&1
	  if ${LS} ${CVSROOT_DIRNAME}/first-dir >/dev/null 2>&1; then
	    # Avoid this test under Cygwin since permissions work differently
	    # there.
	    #
	    # This test also gets avoided under Mac OS X since the system `ls'
	    # is broken and exits with a 0 status despite the permission
	    # denied error.
	    if test -n "$remotehost"; then
	      cygwin_hack=false
	    else
	      cygwin_hack=:
	    fi
	  else
	    cygwin_hack=false
	  fi

	  cd $TESTDIR/1
	  if $cygwin_hack; then :; else
	    dotest modes3-5 "${testcvs} update" \
"${SPROG} update: Updating \.
${SPROG} update: Updating first-dir
${SPROG} update: cannot open directory ${CVSROOT_DIRNAME}/first-dir: Permission denied
${SPROG} update: skipping directory first-dir
${SPROG} update: Updating second-dir"
	  fi

	  # OK, I can see why one might say the above case could be a
	  # fatal error, because normally users without access to first-dir
	  # won't have it in their working directory.  But the next
	  # one is more of a problem if it is fatal.
	  #
	  # The second text string below is for Cygwin again, and again it
	  # should really be XFAIL under Cygwin, but for now deal with the
	  # passing opendir by accepting the alternate string.
	  rm -r first-dir
	  dotest modes3-6 "${testcvs} update -dP" \
"${SPROG} update: Updating .
${SPROG} update: Updating CVSROOT
U ${DOTSTAR}
${SPROG} update: Updating first-dir
${SPROG} update: cannot open directory ${CVSROOT_DIRNAME}/first-dir: Permission denied
${SPROG} update: skipping directory first-dir
${SPROG} update: Updating second-dir" \
"${SPROG} update: Updating .
${SPROG} update: Updating CVSROOT
U ${DOTSTAR}
${SPROG} update: Updating first-dir
${SPROG} update: Updating second-dir"

	  dokeep
	  cd ..
	  rm -r 1
	  # quiet down this one as it will be noisy in proxy mode
	  modify_repo chmod u+rwx $CVSROOT_DIRNAME/first-dir 2>/dev/null
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir \
			     $CVSROOT_DIRNAME/second-dir
	  ;;



	stamps)
	  # Test timestamps.
	  mkdir 1; cd 1
	  dotest stamps-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest stamps-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  touch aa
	  echo '$''Id$' >kw
	  # Cygwin, *cough*, puts the year in the time column until the minute
	  # is no longer the current minute.  Sleep 60 seconds to avoid this
	  # problem.
	  sleep 60
	  ls -l aa >${TESTDIR}/1/stamp.aa.touch
	  ls -l kw >${TESTDIR}/1/stamp.kw.touch
	  # "sleep 1" would suffice if we could assume ls --full-time, but
	  # that is as far as I know unique to GNU ls.  Is there some POSIX.2
	  # way to get the timestamp of a file, including the seconds?
	  sleep 60
	  dotest stamps-3 "${testcvs} add aa kw" \
"${SPROG} add: scheduling file .aa. for addition
${SPROG} add: scheduling file .kw. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  ls -l aa >${TESTDIR}/1/stamp.aa.add
	  ls -l kw >${TESTDIR}/1/stamp.kw.add
	  # "cvs add" should not muck with the timestamp.
	  dotest stamps-4aa \
"cmp ${TESTDIR}/1/stamp.aa.touch ${TESTDIR}/1/stamp.aa.add" ''
	  dotest stamps-4kw \
"cmp ${TESTDIR}/1/stamp.kw.touch ${TESTDIR}/1/stamp.kw.add" ''
	  sleep 60
	  dotest stamps-5 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/aa,v  <--  aa
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/kw,v  <--  kw
initial revision: 1\.1"
	  # Cygwin, *cough*, puts the year in the time column until the minute
	  # is no longer the current minute.  Sleep 60 seconds to avoid this
	  # problem.
	  sleep 60
	  ls -l aa >${TESTDIR}/1/stamp.aa.ci
	  ls -l kw >${TESTDIR}/1/stamp.kw.ci
	  # If there are no keywords, "cvs ci" leaves the timestamp alone
	  # If there are, it sets the timestamp to the date of the commit.
	  # I'm not sure how logical this is, but it is intentional.
	  # If we wanted to get fancy we would make sure the time as
	  # reported in "cvs log kw" matched stamp.kw.ci.  But that would
	  # be a lot of work.
	  dotest stamps-6aa \
	    "cmp ${TESTDIR}/1/stamp.aa.add ${TESTDIR}/1/stamp.aa.ci" ''
	  if cmp ${TESTDIR}/1/stamp.kw.add ${TESTDIR}/1/stamp.kw.ci >/dev/null
	  then
	    fail stamps-6kw
	  else
	    pass stamps-6kw
	  fi
	  cd ../..
	  sleep 60
	  mkdir 2
	  cd 2
	  dotest stamps-7 "${testcvs} -q get first-dir" "U first-dir/aa
U first-dir/kw"
	  cd first-dir
	  ls -l aa >${TESTDIR}/1/stamp.aa.get
	  ls -l kw >${TESTDIR}/1/stamp.kw.get
	  # On checkout, CVS should set the timestamp to the date that the
	  # file was committed.  Could check that the time as reported in
	  # "cvs log aa" matches stamp.aa.get, but that would be a lot of
	  # work.
	  dotest_fail stamps-8aa \
"cmp $TESTDIR/1/stamp.aa.ci $TESTDIR/1/stamp.aa.get >/dev/null"
	  dotest stamps-8kw \
"cmp $TESTDIR/1/stamp.kw.ci $TESTDIR/1/stamp.kw.get"

	  # Now we want to see what "cvs update" does.
	  sleep 60
	  echo add a line >>aa
	  echo add a line >>kw
	  dotest stamps-9 "${testcvs} -q ci -m change-them" \
"$CVSROOT_DIRNAME/first-dir/aa,v  <--  aa
new revision: 1\.2; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/kw,v  <--  kw
new revision: 1\.2; previous revision: 1\.1"
	  
	  # Cygwin, *cough*, puts the year in the time column until the minute
	  # is no longer the current minute.  Sleep 60 seconds to avoid this
	  # problem.
	  sleep 60
	  ls -l aa >${TESTDIR}/1/stamp.aa.ci2
	  ls -l kw >${TESTDIR}/1/stamp.kw.ci2
	  cd ../..
	  cd 1/first-dir
	  sleep 60
	  dotest stamps-10 "${testcvs} -q update" '[UP] aa
[UP] kw'
	  # this doesn't serve any function other than being able to
	  # look at it manually, as we have no machinery for dates being
	  # newer or older than other dates.
	  date >$TESTDIR/1/stamp.debug.update
	  ls -l aa >$TESTDIR/1/stamp.aa.update
	  ls -l kw >$TESTDIR/1/stamp.kw.update
	  # stamp.aa.update and stamp.kw.update should both be approximately
	  # the same as stamp.debug.update.  Perhaps we could be testing
	  # this in a more fancy fashion by "touch stamp.before" before
	  # stamps-10, "touch stamp.after" after, and then using ls -t
	  # to check them.  But for now we just make sure that the *.update
	  # stamps differ from the *.ci2 ones.
	  # As for the rationale, this is so that if one updates and gets
	  # a new revision, then "make" will be sure to regard those files
	  # as newer than .o files which may be sitting around.
	  dotest_fail stamps-11aa \
"cmp $TESTDIR/1/stamp.aa.update $TESTDIR/1/stamp.aa.ci2 >/dev/null"
	  dotest_fail stamps-11kw \
"cmp $TESTDIR/1/stamp.kw.update $TESTDIR/1/stamp.kw.ci2 >/dev/null"

	  dokeep
	  cd ../..
	  rm -r 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	perms)
	  mkdir 1; cd 1
	  dotest perms-init-1 "$testcvs -Q co CVSROOT"
	  cd CVSROOT
	  echo 'PreservePermissions=yes' >> ${CVSROOT_DIRNAME}/CVSROOT/config
	  dotest perms-init-2 "$testcvs -Q ci -mperms"
	  cd ..

	  dotest perms-1 "$testcvs -q co -l ."
	  mkdir first-dir
	  dotest perms-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir

	  touch foo
	  chmod 431 foo
	  dotest perms-3 "${testcvs} add foo" \
"${SPROG} add: scheduling file .foo. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest perms-4 "${testcvs} -q ci -m ''" \
"$CVSROOT_DIRNAME/first-dir/foo,v  <--  foo
initial revision: 1\.1"

	  # Test checking out files with different permissions.
	  cd ../..
	  mkdir 2; cd 2
	  dotest perms-5 "${testcvs} -q co first-dir" "U first-dir/foo"
	  cd first-dir
	  if $remote; then :; else
	    # PreservePermissions not yet implemented for remote.
	    dotest perms-6 "ls -l foo" "-r---wx--x .* foo"
	  fi

	  dokeep
	  cd ../1/CVSROOT
	  restore_adm
	  cd ../..
	  rm -rf 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	symlinks)
	  # short cut around checking out and committing CVSROOT
	  rm -f $CVSROOT_DIRNAME/CVSROOT/config
	  echo 'PreservePermissions=yes' >> $CVSROOT_DIRNAME/CVSROOT/config
	  chmod 444 $CVSROOT_DIRNAME/CVSROOT/config

	  mkdir 1; cd 1
	  dotest symlinks-1 "$testcvs -q co -l ."
	  mkdir first-dir
	  dotest symlinks-2 "$testcvs add first-dir" \
"Directory $CVSROOT_DIRNAME/first-dir added to the repository"
	  cd first-dir

	  dotest symlinks-2.1 "ln -s $TESTDIR/fumble slink"
	  dotest symlinks-3 "$testcvs add slink" \
"$SPROG add: scheduling file .slink. for addition
$SPROG add: use .$SPROG commit. to add this file permanently"
	  if $remote; then
	    # Remote doesn't implement PreservePermissions, and in its
	    # absence the correct behavior is to follow the symlink.
	    dotest_fail symlinks-4r "$testcvs -q ci -m ''" \
"$SPROG \[commit aborted\]: reading slink: No such file or directory"
	  else
	    dotest symlinks-4 "$testcvs -q ci -m ''" \
"$CVSROOT_DIRNAME/first-dir/slink,v  <--  slink
initial revision: 1\.1"

	    # Test checking out symbolic links.
	    cd ../..
	    mkdir 2; cd 2
	    dotest symlinks-5 "$testcvs -q co first-dir" "U first-dir/slink"
	    cd first-dir
	    dotest symlinks-6 "ls -l slink" \
"l[rwx\-]* .* slink -> $TESTDIR/fumble"
	  fi

	  dokeep
	  cd ../..
	  rm -rf 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  restore_adm
	  ;;



	symlinks2)
	  # Symlinks in working directory without PreservePermissions.
	  # Also see: symlinks: with PreservePermissions
	  # rcslib-symlink-*: symlinks in repository.
	  mkdir 1; cd 1
	  dotest symlinks2-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest symlinks2-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  echo nonsymlink > slink
	  dotest symlinks2-3 "${testcvs} add slink" \
"${SPROG} add: scheduling file .slink. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest symlinks2-4 "${testcvs} -q ci -m ''" \
"$CVSROOT_DIRNAME/first-dir/slink,v  <--  slink
initial revision: 1\.1"
	  rm slink
	  # Choose name cvslog.* so it is in default ignore list.
	  echo second file >cvslog.file2
	  dotest symlinks2-5 "ln -s cvslog.file2 slink" ""
	  dotest symlinks2-6 "${testcvs} -q ci -m linkify" \
"$CVSROOT_DIRNAME/first-dir/slink,v  <--  slink
new revision: 1\.2; previous revision: 1\.1"
	  dotest symlinks2-7 "${testcvs} -q update -r 1.1 slink" "[UP] slink"
	  dotest symlinks2-8 "cat slink" "nonsymlink"
	  dotest symlinks2-9 "ls -l slink" "-[-rwx]* .* slink"

	  dokeep
	  cd ../..
	  rm -rf 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	hardlinks)
	  # short cut around checking out and committing CVSROOT
	  rm -f ${CVSROOT_DIRNAME}/CVSROOT/config
	  echo 'PreservePermissions=yes' > ${CVSROOT_DIRNAME}/CVSROOT/config
	  chmod 444 ${CVSROOT_DIRNAME}/CVSROOT/config

	  mkdir 1; cd 1
	  dotest hardlinks-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest hardlinks-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir

	  # Make up some ugly filenames, to test that they get
	  # encoded properly in the delta nodes.  Note that `dotest' screws
	  # up if some arguments have embedded spaces.
	  if touch aaaa
	  then
	    pass hardlinks-2.1
	  else
	    fail hardlinks-2.1
	  fi

	  if ln aaaa b.b.b.b
	  then
	    pass hardlinks-2.2
	  else
	    fail hardlinks-2.2
	  fi

	  if ln aaaa 'dd dd dd'
	  then
	    pass hardlinks-2.3
	  else
	    fail hardlinks-2.3
	  fi

	  dotest hardlinks-3 "${testcvs} add [abd]*" \
"${SPROG} add: scheduling file .aaaa. for addition
${SPROG} add: scheduling file .b\.b\.b\.b. for addition
${SPROG} add: scheduling file .dd dd dd. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  dotest hardlinks-4 "${testcvs} -q ci -m ''" \
"$CVSROOT_DIRNAME/first-dir/aaaa,v  <--  aaaa
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/b\.b\.b\.b,v  <--  b\.b\.b\.b
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/dd dd dd,v  <--  dd dd dd
initial revision: 1\.1"
	  # Test checking out hardlinked files.
	  cd ../..
	  mkdir 2; cd 2
	  if $remote; then
	    # Remote does not implement PreservePermissions.
	    dotest hardlinks-5r "${testcvs} -q co first-dir" \
"U first-dir/aaaa
U first-dir/b\.b\.b\.b
U first-dir/dd dd dd"
	    cd first-dir
	    dotest hardlinks-6r "ls -l [abd]*" \
"-[rwx\-]* *1 .* aaaa
-[rwx\-]* *1 .* b\.b\.b\.b
-[rwx\-]* *1 .* dd dd dd"
	  else
	    dotest hardlinks-5 "${testcvs} -q co first-dir" \
"U first-dir/aaaa
U first-dir/b\.b\.b\.b
U first-dir/dd dd dd"
	    cd first-dir
	    # To make sure that the files are properly hardlinked, it
	    # would be nice to do `ls -i' and make sure all the inodes
	    # match.  But I think that would require expr to support
	    # tagged regexps, and I don't think we can rely on that.
	    # So instead we just see that each file has the right
	    # number of links. -twp
	    dotest hardlinks-6 "ls -l [abd]*" \
"-[rwx\-]* *3 .* aaaa
-[rwx\-]* *3 .* b\.b\.b\.b
-[rwx\-]* *3 .* dd dd dd"
	  fi

	  dokeep
	  cd ../..
	  rm -rf 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  restore_adm
	  ;;



	sticky)
	  # More tests of sticky tags, particularly non-branch sticky tags.
	  # See many tests (e.g. multibranch) for ordinary sticky tag
	  # operations such as adding files on branches.
	  # See "head" test for interaction between stick tags and HEAD.
	  mkdir 1; cd 1
	  dotest sticky-1 "$testcvs -q co -l ."
	  mkdir first-dir
	  dotest sticky-2 "$testcvs add first-dir" \
"Directory $CVSROOT_DIRNAME/first-dir added to the repository"
	  cd first-dir

	  touch file1
	  dotest sticky-3 "$testcvs add file1" \
"$SPROG add: scheduling file .file1. for addition
$SPROG add: use .$SPROG commit. to add this file permanently"
	  dotest sticky-4 "$testcvs -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  dotest sticky-5 "$testcvs -q tag tag1" "T file1"
	  echo add a line >>file1
	  dotest sticky-6 "$testcvs -q ci -m modify" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1"
	  dotest sticky-7 "$testcvs -q update -r tag1" "[UP] file1"
	  dotest sticky-8 "cat file1" ''
	  dotest sticky-9 "$testcvs -q update" ''
	  dotest sticky-10 "cat file1" ''
	  touch file2
	  dotest_fail sticky-11 "$testcvs add file2" \
"$SPROG add: cannot add file on non-branch tag \`tag1'"
	  dotest sticky-12 "$testcvs -q update -A" "[UP] file1
$QUESTION file2" "$QUESTION file2
[UP] file1"
	  dotest sticky-13 "${testcvs} add file2" \
"$SPROG add: scheduling file .file2. for addition
$SPROG add: use .$SPROG commit. to add this file permanently"
	  dotest sticky-14 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.1"

	  # Now back to tag1
	  dotest sticky-15 "${testcvs} -q update -r tag1" "[UP] file1
$SPROG update: \`file2' is no longer in the repository"

	  rm file1
	  dotest sticky-16 "${testcvs} rm file1" \
"$SPROG remove: scheduling .file1. for removal
$SPROG remove: use .$SPROG commit. to remove this file permanently"
	  # Hmm, this command seems to silently remove the tag from
	  # the file.  This appears to be intentional.
	  # The silently part especially strikes me as odd, though.
	  dotest sticky-17 "$testcvs -q ci -m remove-it" ""
	  dotest sticky-18 "$testcvs -q update -A" "U file1
U file2"
	  dotest sticky-19 "$testcvs -q update -r tag1" \
"${SPROG} update: \`file1' is no longer in the repository
${SPROG} update: \`file2' is no longer in the repository"
	  dotest sticky-20 "$testcvs -q update -A" "U file1
U file2"

	  # Now try with a numeric revision.
	  dotest sticky-21 "$testcvs -q update -r 1.1 file1" "U file1"
	  dotest sticky-22 "$testcvs rm -f file1" \
"$SPROG remove: cannot remove file .file1. which has a numeric sticky tag of .1\.1."
	  # The old behavior was that remove allowed this and then commit
	  # gave an error, which was somewhat hard to clear.  I mean, you
	  # could get into a long elaborate discussion of this being a
	  # conflict and two ways to resolve it, but I don't really see
	  # why CVS should have a concept of conflict that arises, not from
	  # parallel development, but from CVS's own sticky tags.

	  # Ditto with a sticky date.
	  #
	  # I'm kind of surprised that the "file1 was lost" doesn't crop
	  # up elsewhere in the testsuite.  It is a long-standing
	  # discrepency between local and remote CVS and should probably
	  # be cleaned up at some point.
	  dotest sticky-23 "$testcvs -q update -Dnow file1" \
"$SPROG update: warning: \`file1' was lost
U file1" "U file1"
	  dotest sticky-24 "$testcvs rm -f file1" \
"$SPROG remove: cannot remove file .file1. which has a sticky date of .[0-9.]*."

	  dotest sticky-25 "$testcvs -q update -A" \
"$SPROG update: warning: \`file1' was lost
U file1" "U file1"

	  dokeep
	  restore_adm
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	keyword)
	  # Test keyword expansion.
	  # Various other tests relate to our ability to correctly
	  # set the keyword expansion mode.
	  # "binfiles" tests "cvs admin -k".
	  # "binfiles" and "binfiles2" test "cvs add -k".
	  # "rdiff" tests "cvs co -k".
	  # "binfiles" (and this test) test "cvs update -k".
	  # "binwrap" tests setting the mode from wrappers.
	  # "keyword2" tests "cvs update -kk -j" with text and binary files
	  # I don't think any test is testing "cvs import -k".
	  # Other keyword expansion tests:
	  #   keywordlog - $Log.
	  mkdir 1; cd 1
	  dotest keyword-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest keyword-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
          cd first-dir

	  echo '$''Author$' > file1
	  echo '$''Date$' >> file1
	  echo '$''Header$' >> file1
	  echo '$''Id$' >> file1
	  echo '$''Locker$' >> file1
	  echo '$''Name$' >> file1
	  echo '$''RCSfile$' >> file1
	  echo '$''Revision$' >> file1
	  echo '$''Source$' >> file1
	  echo '$''State$' >> file1
	  echo '$''Nonkey$' >> file1
	  # Omit the trailing dollar sign
	  echo '$''Date' >> file1
	  # Put two keywords on one line
	  echo '$''State$' '$''State$' >> file1
	  # Use a header for Log
	  echo 'xx $''Log$' >> file1

	  dotest keyword-3 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest keyword-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  dotest keyword-5 "cat file1" \
'\$'"Author: ${username} "'\$'"
"'\$'"Date: [0-9][0-9][0-9][0-9]/[0-9][0-9]/[0-9][0-9] [0-9][0-9]:[0-9][0-9]:[0-9][0-9] "'\$'"
"'\$'"Header: ${CVSROOT_DIRNAME}/first-dir/file1,v 1\.1 [0-9/]* [0-9:]* ${username} Exp "'\$'"
"'\$'"Id: file1,v 1\.1 [0-9/]* [0-9:]* ${username} Exp "'\$'"
"'\$'"Locker:  "'\$'"
"'\$'"Name:  "'\$'"
"'\$'"RCSfile: file1,v "'\$'"
"'\$'"Revision: 1\.1 "'\$'"
"'\$'"Source: ${CVSROOT_DIRNAME}/first-dir/file1,v "'\$'"
"'\$'"State: Exp "'\$'"
"'\$'"Nonkey"'\$'"
"'\$'"Date
"'\$'"State: Exp "'\$'" "'\$'"State: Exp "'\$'"
xx "'\$'"Log: file1,v "'\$'"
xx Revision 1\.1  [0-9/]* [0-9:]*  ${username}
xx add
xx"

	  # Use cvs admin to lock the RCS file in order to check -kkvl
	  # vs. -kkv.  CVS does not normally lock RCS files, but some
	  # people use cvs admin to enforce reserved checkouts.
	  dotest keyword-6 "${testcvs} admin -l file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
1\.1 locked
done"

	  dotest keyword-7 "${testcvs} update -kkv file1" "U file1"
	  dotest keyword-8 "cat file1" \
'\$'"Author: ${username} "'\$'"
"'\$'"Date: [0-9][0-9][0-9][0-9]/[0-9][0-9]/[0-9][0-9] [0-9][0-9]:[0-9][0-9]:[0-9][0-9] "'\$'"
"'\$'"Header: ${CVSROOT_DIRNAME}/first-dir/file1,v 1\.1 [0-9/]* [0-9:]* ${username} Exp "'\$'"
"'\$'"Id: file1,v 1\.1 [0-9/]* [0-9:]* ${username} Exp "'\$'"
"'\$'"Locker:  "'\$'"
"'\$'"Name:  "'\$'"
"'\$'"RCSfile: file1,v "'\$'"
"'\$'"Revision: 1\.1 "'\$'"
"'\$'"Source: ${CVSROOT_DIRNAME}/first-dir/file1,v "'\$'"
"'\$'"State: Exp "'\$'"
"'\$'"Nonkey"'\$'"
"'\$'"Date
"'\$'"State: Exp "'\$'" "'\$'"State: Exp "'\$'"
xx "'\$'"Log: file1,v "'\$'"
xx Revision 1\.1  [0-9/]* [0-9:]*  ${username}
xx add
xx"

	  dotest keyword-9 "${testcvs} update -kkvl file1" "U file1"
	  dotest keyword-10 "cat file1" \
'\$'"Author: ${username} "'\$'"
"'\$'"Date: ${RCSKEYDATE} "'\$'"
"'\$'"Header: ${CVSROOT_DIRNAME}/first-dir/file1,v 1\.1 ${RCSKEYDATE} ${username} Exp ${username} "'\$'"
"'\$'"Id: file1,v 1\.1 ${RCSKEYDATE} ${username} Exp ${username} "'\$'"
"'\$'"Locker: ${username} "'\$'"
"'\$'"Name:  "'\$'"
"'\$'"RCSfile: file1,v "'\$'"
"'\$'"Revision: 1\.1 "'\$'"
"'\$'"Source: ${CVSROOT_DIRNAME}/first-dir/file1,v "'\$'"
"'\$'"State: Exp "'\$'"
"'\$'"Nonkey"'\$'"
"'\$'"Date
"'\$'"State: Exp "'\$'" "'\$'"State: Exp "'\$'"
xx "'\$'"Log: file1,v "'\$'"
xx Revision 1\.1  ${RCSKEYDATE}  ${username}
xx add
xx"

	  dotest keyword-11 "${testcvs} update -kk file1" "U file1"
	  dotest keyword-12 "cat file1" \
'\$'"Author"'\$'"
"'\$'"Date"'\$'"
"'\$'"Header"'\$'"
"'\$'"Id"'\$'"
"'\$'"Locker"'\$'"
"'\$'"Name"'\$'"
"'\$'"RCSfile"'\$'"
"'\$'"Revision"'\$'"
"'\$'"Source"'\$'"
"'\$'"State"'\$'"
"'\$'"Nonkey"'\$'"
"'\$'"Date
"'\$'"State"'\$'" "'\$'"State"'\$'"
xx "'\$'"Log"'\$'"
xx Revision 1\.1  ${RCSKEYDATE}  ${username}
xx add
xx"

	  dotest keyword-13 "${testcvs} update -kv file1" "U file1"
	  dotest keyword-14 "cat file1" \
"${username}
${RCSKEYDATE}
${CVSROOT_DIRNAME}/first-dir/file1,v 1\.1 ${RCSKEYDATE} ${username} Exp
file1,v 1\.1 ${RCSKEYDATE} ${username} Exp


file1,v
1\.1
${CVSROOT_DIRNAME}/first-dir/file1,v
Exp
"'\$'"Nonkey"'\$'"
"'\$'"Date
Exp Exp
xx file1,v
xx Revision 1\.1  ${RCSKEYDATE}  ${username}
xx add
xx"

	  dotest keyword-15 "${testcvs} update -ko file1" "U file1"
	  dotest keyword-16 "cat file1" \
'\$'"Author"'\$'"
"'\$'"Date"'\$'"
"'\$'"Header"'\$'"
"'\$'"Id"'\$'"
"'\$'"Locker"'\$'"
"'\$'"Name"'\$'"
"'\$'"RCSfile"'\$'"
"'\$'"Revision"'\$'"
"'\$'"Source"'\$'"
"'\$'"State"'\$'"
"'\$'"Nonkey"'\$'"
"'\$'"Date
"'\$'"State"'\$'" "'\$'"State"'\$'"
xx "'\$'"Log"'\$'

	  # Test the Name keyword.  First go back to normal expansion.

	  dotest keyword-17 "${testcvs} update -A file1" "U file1"

	  echo '$''Name$' > file1
	  dotest keyword-18 "${testcvs} ci -m modify file1" \
"${CVSROOT_DIRNAME}/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1"
	  dotest keyword-19 "${testcvs} -q tag tag1" "T file1"
	  echo "change" >> file1
	  dotest keyword-20 "${testcvs} -q ci -m mod2 file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.3; previous revision: 1\.2"
	  # FIXCVS - These unpatchable files are happening because the tag
	  # associated with the current base version of the file in the
	  # sandbox is not available in these cases.  See the note in the
	  # patch_file function in update.c.
	  dotest keyword-21 "${testcvs} -q update -r tag1" "U file1" \
"P file1
${CPROG} update: checksum failure after patch to \./file1; will refetch
${CPROG} client: refetching unpatchable files
$SPROG update: warning: \`file1' was lost
U file1"

	  dotest keyword-22 "cat file1" '\$'"Name: tag1 "'\$'

	  if $remote; then
	    # Like serverpatch-8.  Not sure there is anything much we
	    # can or should do about this.
	    dotest keyword-23r "${testcvs} update -A file1" "P file1
${CPROG} update: checksum failure after patch to \./file1; will refetch
${CPROG} client: refetching unpatchable files
$SPROG update: warning: \`file1' was lost
U file1"
	  else
	    dotest keyword-23 "${testcvs} update -A file1" "[UP] file1"
	  fi
	  dotest keyword-24 "cat file1" '\$'"Name:  "'\$'"
change"

	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	keywordlog)
	  # Test the Log keyword.
	  mkdir 1; cd 1
	  dotest keywordlog-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest keywordlog-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir
	  echo initial >file1
	  dotest keywordlog-3 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"

	  # See "rmadd" for a list of other tests of cvs ci -r.
	  dotest keywordlog-4 "${testcvs} -q ci -r 1.3 -m add file1" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.3"

	  cd ../..
	  mkdir 2; cd 2
	  dotest keywordlog-4a "${testcvs} -q co first-dir" "U first-dir/file1"
	  cd ../1/first-dir

	  echo 'xx $''Log$' >> file1
	  cat >${TESTDIR}/comment.tmp <<EOF
First log line
Second log line
EOF
	  # As with rmadd-25, "cvs ci -r" sets a sticky tag.
	  dotest_fail keywordlog-4b \
"${testcvs} ci -F ${TESTDIR}/comment.tmp file1" \
"${SPROG} commit: sticky tag .1\.3. for file .file1. is not a branch
${SPROG} \[commit aborted\]: correct above errors first!"
	  dotest keywordlog-4c "${testcvs} -q update -A" "M file1"

	  dotest keywordlog-5 "${testcvs} ci -F ${TESTDIR}/comment.tmp file1" \
"${CVSROOT_DIRNAME}/first-dir/file1,v  <--  file1
new revision: 1\.4; previous revision: 1\.3"
	  rm -f ${TESTDIR}/comment.tmp
	  dotest keywordlog-6 "${testcvs} -q tag -b br" "T file1"
	  dotest keywordlog-7 "cat file1" \
"initial
xx "'\$'"Log: file1,v "'\$'"
xx Revision 1\.4  ${RCSKEYDATE}  ${username}
xx First log line
xx Second log line
xx"

	  cd ../../2/first-dir
	  dotest keywordlog-8 "${testcvs} -q update" "[UP] file1"
	  dotest keywordlog-9 "cat file1" \
"initial
xx "'\$'"Log: file1,v "'\$'"
xx Revision 1\.4  ${RCSKEYDATE}  ${username}
xx First log line
xx Second log line
xx"
	  cd ../../1/first-dir

	  echo "change" >> file1
	  dotest keywordlog-10 "${testcvs} ci -m modify file1" \
"${CVSROOT_DIRNAME}/first-dir/file1,v  <--  file1
new revision: 1\.5; previous revision: 1\.4"
	  dotest keywordlog-11 "cat file1" \
"initial
xx "'\$'"Log: file1,v "'\$'"
xx Revision 1\.5  ${RCSKEYDATE}  ${username}
xx modify
xx
xx Revision 1\.4  ${RCSKEYDATE}  ${username}
xx First log line
xx Second log line
xx
change"

	  cd ../../2/first-dir
	  dotest keywordlog-12 "${testcvs} -q update" "[UP] file1"
	  dotest keywordlog-13 "cat file1" \
"initial
xx "'\$'"Log: file1,v "'\$'"
xx Revision 1\.5  ${RCSKEYDATE}  ${username}
xx modify
xx
xx Revision 1\.4  ${RCSKEYDATE}  ${username}
xx First log line
xx Second log line
xx
change"

	  cd ../../1/first-dir
	  dotest keywordlog-14 "${testcvs} -q update -r br" "[UP] file1"
	  echo br-change >>file1
	  dotest keywordlog-15 "${testcvs} -q ci -m br-modify" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.4\.2\.1; previous revision: 1\.4"
	  dotest keywordlog-16 "cat file1" \
"initial
xx "'\$'"Log: file1,v "'\$'"
xx Revision 1\.4\.2\.1  ${RCSKEYDATE}  ${username}
xx br-modify
xx
xx Revision 1\.4  ${RCSKEYDATE}  ${username}
xx First log line
xx Second log line
xx
br-change"
	  cd ../../2/first-dir
	  dotest keywordlog-17 "${testcvs} -q update -r br" "[UP] file1"
	  dotest keywordlog-18 "cat file1" \
"initial
xx "'\$'"Log: file1,v "'\$'"
xx Revision 1\.4\.2\.1  ${RCSKEYDATE}  ${username}
xx br-modify
xx
xx Revision 1\.4  ${RCSKEYDATE}  ${username}
xx First log line
xx Second log line
xx
br-change"
	  cd ../..
	  dotest keywordlog-19 "${testcvs} -q co -p -r br first-dir/file1" \
"initial
xx "'\$'"Log: file1,v "'\$'"
xx Revision 1\.4\.2\.1  ${RCSKEYDATE}  ${username}
xx br-modify
xx
xx Revision 1\.4  ${RCSKEYDATE}  ${username}
xx First log line
xx Second log line
xx
br-change"
	  dotest keywordlog-20 "${testcvs} -q co -p first-dir/file1" \
"initial
xx "'\$'"Log: file1,v "'\$'"
xx Revision 1\.5  ${RCSKEYDATE}  ${username}
xx modify
xx
xx Revision 1\.4  ${RCSKEYDATE}  ${username}
xx First log line
xx Second log line
xx
change"
	  dotest keywordlog-21 "${testcvs} -q co -p -r 1.4 first-dir/file1" \
"initial
xx "'\$'"Log: file1,v "'\$'"
xx Revision 1\.4  ${RCSKEYDATE}  ${username}
xx First log line
xx Second log line
xx"

	  cd 2/first-dir
	  # OK, the basic rule for keyword expansion is that it
	  # happens on checkout.  And the rule for annotate is that
	  # it annotates a checked-in revision, rather than a checked-out
	  # file.  So, although it is kind of confusing that the latest
	  # revision does not appear in the annotated output, and the
	  # annotated output does not quite match what you'd get with
	  # update or checkout, the behavior is more or less logical.
	  # The same issue occurs with annotate and other keywords,
	  # I think, although it is particularly noticeable for $Log.
	  dotest keywordlog-22 "${testcvs} ann -r br file1" \
"
Annotations for file1
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
1\.3          ($username8 *[0-9a-zA-Z-]*): initial
1\.4\.2\.1      ($username8 *[0-9a-zA-Z-]*): xx "'\$'"Log: file1,v "'\$'"
1\.4\.2\.1      ($username8 *[0-9a-zA-Z-]*): xx Revision 1\.4  ${RCSKEYDATE}  $username
1\.4\.2\.1      ($username8 *[0-9a-zA-Z-]*): xx First log line
1\.4\.2\.1      ($username8 *[0-9a-zA-Z-]*): xx Second log line
1\.4\.2\.1      ($username8 *[0-9a-zA-Z-]*): xx
1\.4\.2\.1      ($username8 *[0-9a-zA-Z-]*): br-change"
	  dotest keywordlog-23 "${testcvs} ann -r HEAD file1" \
"
Annotations for file1
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
1\.3          ($username8 *[0-9a-zA-Z-]*): initial
1\.5          ($username8 *[0-9a-zA-Z-]*): xx "'\$'"Log: file1,v "'\$'"
1\.5          ($username8 *[0-9a-zA-Z-]*): xx Revision 1\.4  ${RCSKEYDATE}  $username
1\.5          ($username8 *[0-9a-zA-Z-]*): xx First log line
1\.5          ($username8 *[0-9a-zA-Z-]*): xx Second log line
1\.5          ($username8 *[0-9a-zA-Z-]*): xx
1\.5          ($username8 *[0-9a-zA-Z-]*): change"
	  cd ../..

	  #
	  # test the operation of 'admin -o' in conjunction with keywords
	  # (especially Log - this used to munge the RCS file for all time)
	  #

	  dotest keywordlog-24 \
"${testcvs} admin -oHEAD 1/first-dir/file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
deleting revision 1\.5
done"

	  dotest keywordlog-25 \
"${testcvs} -q co -p first-dir/file1" \
"initial
xx "'\$'"Log: file1,v "'\$'"
xx Revision 1\.4  ${RCSKEYDATE}  ${username}
xx First log line
xx Second log line
xx"

	  # Now test the behavior when the comment leader exceeds the
	  # configured maximum.
	  mkdir 3; cd 3
	  dotest keywordlog-26 "$testcvs -Q co first-dir"

	  cd first-dir
	  sed 's/xx \$/1234567890123456789 $/' <file1 >tmp
	  mv tmp file1
	  dotest keywordlog-27 "$testcvs -Q ci -mrevision-5"
	  dotest keywordlog-28 "cat file1" \
"initial
1234567890123456789 "'\$'"Log: file1,v "'\$'"
1234567890123456789 Revision 1\.5  $RCSKEYDATE  $username
1234567890123456789 revision-5
1234567890123456789
xx Revision 1\.4  $RCSKEYDATE  $username
xx First log line
xx Second log line
xx"

	  sed 's/1234567890123456789 \$/12345678901234567890 $/' <file1 >tmp
	  mv tmp file1
	  dotest keywordlog-29 "$testcvs -Q ci -mrevision-6" \
"$SPROG commit: Skipping "'`$''Log$'"' keyword due to excessive comment leader\."
	  dotest keywordlog-30 "cat file1" \
"initial
12345678901234567890 "'\$'"Log: file1,v "'\$'"
1234567890123456789 Revision 1\.5  $RCSKEYDATE  $username
1234567890123456789 revision-5
1234567890123456789
xx Revision 1\.4  $RCSKEYDATE  $username
xx First log line
xx Second log line
xx"

	  # Check that the Log-related config options work.
	  cd ..
	  dotest keywordlog-31 "$testcvs -Q co CVSROOT"
	  cd CVSROOT
	  echo "UseArchiveCommentLeader=TrUe" >>config
	  dotest keywordlog-32 "$testcvs -Q ci -mset-UseArchiveCommentLeader"

	  cd ../first-dir
	  dotest keywordlog-33 "$testcvs -Q ci -fmrevision-7 file1"
	  dotest keywordlog-34 "cat file1" \
"initial
12345678901234567890 "'\$'"Log: file1,v "'\$'"
# Revision 1\.7  $RCSKEYDATE  $username
# revision-7
#
1234567890123456789 Revision 1\.5  $RCSKEYDATE  $username
1234567890123456789 revision-5
1234567890123456789
xx Revision 1\.4  $RCSKEYDATE  $username
xx First log line
xx Second log line
xx"

	  cd ../CVSROOT
	  echo "MaxCommentLeaderLength=1k" >>config
	  dotest keywordlog-35 "$testcvs -Q ci -mset-MaxCommentLeaderLength"

	  cd ../first-dir
	  dotest keywordlog-36 "$testcvs -Q ci -fmrevision-8 file1"
	  dotest keywordlog-37 "cat file1" \
"initial
12345678901234567890 "'\$'"Log: file1,v "'\$'"
12345678901234567890 Revision 1\.8  $RCSKEYDATE  $username
12345678901234567890 revision-8
12345678901234567890
# Revision 1\.7  $RCSKEYDATE  $username
# revision-7
#
1234567890123456789 Revision 1\.5  $RCSKEYDATE  $username
1234567890123456789 revision-5
1234567890123456789
xx Revision 1\.4  $RCSKEYDATE  $username
xx First log line
xx Second log line
xx"

	  dokeep
	  cd ../..
	  restore_adm
	  rm -r 1 2 3
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	keywordname)
	  # Test the Name keyword.
	  # See the keyword test for a descriptions of some other tests that
	  # test keyword expansion modes.
	  mkdir keywordname; cd keywordname
	  mkdir 1; cd 1
	  dotest keywordname-init-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest keywordname-init-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir

	  echo '$'"Name$" >file1
	  echo '$'"Name$" >file2
	  dotest keywordname-init-3 "${testcvs} add file1 file2" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: scheduling file .file2. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"

	  # See "rmadd" for a list of other tests of cvs ci -r.
	  dotest keywordname-init-4 "${testcvs} -q ci -r 1.3 -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.3
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.3"

	  dotest keywordname-init-6 "${testcvs} -q up -A"
	  dotest keywordname-init-7 "${testcvs} -q tag -b br" \
"T file1
T file2"

	  echo new data >>file1
	  dotest keywordname-init-8 "${testcvs} -q ci -mchange" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.4; previous revision: 1\.3"

	  # First check out a branch.
	  #
	  # There used to be a bug where static tags would be substituted for
	  # Name keywords but not branch tags.
	  #
	  # FIXCVS - BUG
	  # Why shouldn't the non-update case not cause a substitution?
	  # An update -kk or -A will unsub and sub keywords without updates
	  # being required.
	  # FIXCVS - see note above keyword-21
	  dotest keywordname-update-1 "${testcvs} -q up -rbr" "U file1" \
"P file1
${CPROG} update: checksum failure after patch to \./file1; will refetch
${CPROG} client: refetching unpatchable files
$SPROG update: warning: \`file1' was lost
U file1"
	  dotest keywordname-update-2 "cat file1" '\$'"Name: br "'\$'
	  dotest keywordname-update-3 "cat file2" '\$'"Name:  "'\$'

	  # Now verify that updating to the trunk leaves no substitution for
	  # $Name
	  dotest keywordname-update-4 "${testcvs} -q tag firsttag" \
"T file1
T file2"
	  # FIXCVS - see note above keyword-21
	  dotest keywordname-update-5 "${testcvs} -q up -A" "U file1" \
"P file1
${CPROG} update: checksum failure after patch to \./file1; will refetch
${CPROG} client: refetching unpatchable files
$SPROG update: warning: \`file1' was lost
U file1"
	  dotest keywordname-update-6 "cat file1" \
'\$'"Name:  "'\$'"
new data"
	  dotest keywordname-update-7 "cat file2" '\$'"Name:  "'\$'

	  # But updating to a static tag does cause a substitution
	  # FIXCVS - see same note above
	  dotest keywordname-update-8 "${testcvs} -q up -rfirsttag" "U file1" \
"P file1
${CPROG} update: checksum failure after patch to \./file1; will refetch
${CPROG} client: refetching unpatchable files
$SPROG update: warning: \`file1' was lost
U file1"
	  dotest keywordname-update-9 "cat file1" '\$'"Name: firsttag "'\$'
	  dotest keywordname-update-10 "cat file2" '\$'"Name:  "'\$'

	  # And reverify the trunk update when the change is actually removed.
	  dotest keywordname-update-11 "${testcvs} -q up -A" "[UP] file1" \
"P file1
${CPROG} update: checksum failure after patch to ./file1; will refetch
${CPROG} client: refetching unpatchable files
$SPROG update: warning: \`file1' was lost
U file1"
	  dotest keywordname-update-12 "cat file1" \
'\$'"Name:  "'\$'"
new data"
	  dotest keywordname-update-13 "cat file2" '\$'"Name:  "'\$'

	  cd ../..

	  # now verify that a fresh checkout substitutes all the $Name fields
	  mkdir 2; cd 2
	  dotest keywordname-checkout-1 \
"${testcvs} -q co -rfirsttag first-dir" \
"U first-dir/file1
U first-dir/file2"
	  cd first-dir
	  dotest keywordname-checkout-2 "cat file1" '\$'"Name: firsttag "'\$'
	  dotest keywordname-checkout-3 "cat file2" '\$'"Name: firsttag "'\$'

	  dokeep
	  cd ../../..
	  rm -r keywordname
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	keyword2)
	  # Test merging on files with keywords:
	  #   without -kk
	  #   with -kk
	  #     on text files
	  #     on binary files
	  # Note:  This test assumes that CVS has already passed the binfiles
	  #    test sequence
	  # Note2:  We are testing positive on binary corruption here
	  #    we probably really DON'T want to 'cvs update -kk' a binary file...
	  mkdir 1; cd 1
	  dotest keyword2-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest keyword2-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
          cd first-dir

	  echo '$''Revision$' >> file1
	  echo "I" >>file1
	  echo "like" >>file1
	  echo "long" >>file1
	  echo "files!" >>file1
	  echo "" >>file1
	  echo "a test line for our times" >>file1
	  echo "" >>file1
	  echo "They" >>file1
	  echo "make" >>file1
	  echo "diff" >>file1
	  echo "look like it" >>file1
	  echo "did a much better" >>file1
	  echo "job." >>file1
	  dotest keyword2-3 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"

	  ${AWK} 'BEGIN { printf "%c%c%c%sRevision: 1.1 $@%c%c", \
	    2, 10, 137, "$", 13, 10 }' \
	    </dev/null | ${TR} '@' '\000' >../binfile.dat
	  cp ../binfile.dat .
	  dotest keyword2-5 "${testcvs} add -kb binfile.dat" \
"${SPROG} add: scheduling file .binfile\.dat. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"

	  dotest keyword2-6 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/binfile\.dat,v  <--  binfile\.dat
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"

	  dotest keyword2-7 "${testcvs} -q tag -b branch" \
"T binfile\.dat
T file1"

	  sed -e 's/our/the best of and the worst of/' file1 >f; mv f file1
	  dotest keyword2-8 "${testcvs} -q ci -m change" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1"

	  dotest keyword2-9 "${testcvs} -q update -r branch" '[UP] file1'

	  echo "what else do we have?" >>file1
	  dotest keyword2-10 "${testcvs} -q ci -m change" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.1; previous revision: 1\.1"

	  # Okay, first a conflict in file1 - should be okay with binfile.dat
	  dotest keyword2-11 "${testcvs} -q update -A -j branch" \
"U file1
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.1
retrieving revision 1\.1\.2\.1
Merging differences between 1\.1 and 1\.1\.2\.1 into file1
rcsmerge: warning: conflicts during merge"

	  dotest_fail keyword2-12 "${testcvs} diff file1" \
"Index: file1
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.2
diff -r1\.2 file1
0a1
> <<<<<<< file1
1a3,5
> =======
> \\\$""Revision: 1\.1\.2\.1 \\\$
> >>>>>>> 1\.1\.2\.1
14a19
> what else do we have${QUESTION}"

	  # Here's the problem... shouldn't -kk a binary file...
	  rm file1
	  dotest keyword2-13 "${testcvs} -q update -A -kk -j branch" \
"${SPROG} update: warning: \`file1' was lost
U file1
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.1
retrieving revision 1\.1\.2\.1
Merging differences between 1\.1 and 1\.1\.2\.1 into file1"

	  # binfile won't get checked in, but it is now corrupt and could
	  # have been checked in if it had changed on the branch...
	  dotest keyword2-14 "${testcvs} -q ci -m change" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.3; previous revision: 1\.2"

	  # "-kk" no longer corrupts binary files
	  dotest keyword2-15 "cmp binfile.dat ../binfile.dat" ''

	  # Okay, restore everything and make CVS try and merge a binary file...
	  # "-kk" no longer affects binary files
	  dotest keyword2-16 "${testcvs} -q update -A" \
"[UP] file1"
	  dotest keyword2-17 "${testcvs} -q tag -b branch2" \
"T binfile\.dat
T file1"
	  dotest keyword2-18 "${testcvs} -q update -r branch2" ''

	  ${AWK} 'BEGIN { printf "%c%c%c@%c%c", 2, 10, 137, 13, 10 }' \
	    </dev/null | ${TR} '@' '\000' >>binfile.dat
	  dotest keyword2-19 "$testcvs -q ci -m badbadbad" \
"$CVSROOT_DIRNAME/first-dir/binfile\.dat,v  <--  binfile\.dat
new revision: 1\.1\.4\.1; previous revision: 1\.1"
	  # "-kk" no longer affects binary files

	  # XXXX: do not ask, why we get the "U binfile.dat" line twice
	  #       looks like a bug!
	  dotest keyword2-20 "${testcvs} -q update -A -kk -j branch2" \
"U binfile\.dat
U binfile\.dat
U file1"

	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	head)
	  # Testing handling of the HEAD special tag.
	  # There are many cases involving added and removed files
	  # which we don't yet try to deal with.
	  # TODO: We also could be paying much closer attention to
	  # "head of the trunk" versus "head of the default branch".
	  # That is what "cvs import" is doing here (but I didn't really
	  # fully follow through on writing the tests for that case).
	  mkdir imp-dir
	  cd imp-dir
	  echo 'imported contents' >file1
	  # It may seem like we don't do much with file2, but do note that
	  # the "cvs diff" invocations do also diff file2 (and come up empty).
	  echo 'imported contents' >file2
	  dotest_sort head-1 "${testcvs} import -m add first-dir tag1 tag2" \
"

N first-dir/file1
N first-dir/file2
No conflicts created by this import"
	  cd ..
	  rm -r imp-dir
	  mkdir 1
	  cd 1
	  dotest head-2 "${testcvs} -q co first-dir" \
"U first-dir/file1
U first-dir/file2"
	  cd first-dir
	  echo 'add a line on trunk' >> file1
	  dotest head-3 "${testcvs} -q ci -m modify" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1"
	  dotest head-4 "${testcvs} -q tag trunktag" "T file1
T file2"
	  echo 'add a line on trunk after trunktag' >> file1
	  dotest head-5 "${testcvs} -q ci -m modify" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.3; previous revision: 1\.2"
	  dotest head-6 "${testcvs} -q tag -b br1" "T file1
T file2"
	  dotest head-7 "${testcvs} -q update -r br1" ""
	  echo 'modify on branch' >>file1
	  dotest head-8 "${testcvs} -q ci -m modify" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.3\.2\.1; previous revision: 1\.3"
	  dotest head-9 "${testcvs} -q tag brtag" "T file1
T file2"
	  echo 'modify on branch after brtag' >>file1
	  dotest head-10 "${testcvs} -q ci -m modify" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.3\.2\.2; previous revision: 1\.3\.2\.1"
	  # With no sticky tags, HEAD is the head of the trunk.
	  dotest head-trunk-setup "${testcvs} -q update -A" "[UP] file1"
	  dotest head-trunk-update "${testcvs} -q update -r HEAD -p file1" \
"imported contents
add a line on trunk
add a line on trunk after trunktag"
	  # and diff thinks so too.  Case (a) from the comment in
	  # cvs.texinfo (Common options).
	  dotest_fail head-trunk-diff "${testcvs} -q diff -c -r HEAD -r br1" \
"Index: file1
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.3
retrieving revision 1\.3\.2\.2
diff -c -r1\.3 -r1\.3\.2\.2
\*\*\* file1	${RFCDATE}	1\.3
--- file1	${RFCDATE}	1\.3\.2\.2
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1,3 \*\*\*\*
--- 1,5 ----
  imported contents
  add a line on trunk
  add a line on trunk after trunktag
${PLUS} modify on branch
${PLUS} modify on branch after brtag"

	  # With a branch sticky tag, HEAD is the head of the trunk.
	  dotest head-br1-setup "${testcvs} -q update -r br1" "[UP] file1"
	  dotest head-br1-update "${testcvs} -q update -r HEAD -p file1" \
"imported contents
add a line on trunk
add a line on trunk after trunktag"
	  # But diff thinks that HEAD is "br1".  Case (b) from cvs.texinfo.
	  # Probably people are relying on it.
	  dotest head-br1-diff "${testcvs} -q diff -c -r HEAD -r br1" ""

	  # With a nonbranch sticky tag on a branch,
	  # HEAD is the head of the trunk
	  dotest head-brtag-setup "${testcvs} -q update -r brtag" "[UP] file1"
	  dotest head-brtag-update "${testcvs} -q update -r HEAD -p file1" \
"imported contents
add a line on trunk
add a line on trunk after trunktag"

	  # CVS 1.9 and older thought that HEAD is "brtag" (this was
	  # noted as "strange, maybe accidental").  But "br1" makes a
	  # whole lot more sense.
	  dotest head-brtag-diff "${testcvs} -q diff -c -r HEAD -r br1" ""

	  # With a nonbranch sticky tag on the trunk, HEAD is the head
	  # of the trunk, I think.
	  dotest head-trunktag-setup "${testcvs} -q update -r trunktag" \
"[UP] file1"
	  dotest head-trunktag-check "cat file1" "imported contents
add a line on trunk"
	  dotest head-trunktag-update "${testcvs} -q update -r HEAD -p file1" \
"imported contents
add a line on trunk
add a line on trunk after trunktag"
	  # Like head-brtag-diff, there is a non-branch sticky tag.
	  dotest_fail head-trunktag-diff \
	    "${testcvs} -q diff -c -r HEAD -r br1" \
"Index: file1
===================================================================
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
retrieving revision 1\.3
retrieving revision 1\.3\.2\.2
diff -c -r1\.3 -r1\.3\.2\.2
\*\*\* file1	${RFCDATE}	1\.3
--- file1	${RFCDATE}	1\.3\.2\.2
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
\*\*\* 1,3 \*\*\*\*
--- 1,5 ----
  imported contents
  add a line on trunk
  add a line on trunk after trunktag
${PLUS} modify on branch
${PLUS} modify on branch after brtag"

	  # Also might test what happens if we setup with update -r
	  # HEAD.  In general, if sticky tags matter, does the
	  # behavior of "update -r <foo>" (without -p) depend on the
	  # sticky tags before or after the update?

	  # Note that we are testing both the case where this deletes
	  # a revision (file1) and the case where it does not (file2)
	  dotest_fail head-o0a "${testcvs} admin -o ::br1" \
"${SPROG} admin: Administrating \.
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
${SPROG} admin: cannot remove revision 1\.3\.2\.1 because it has tags
${SPROG} admin: RCS file for .file1. not modified\.
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
done"
	  dotest head-o0b "${testcvs} tag -d brtag" \
"${SPROG} tag: Untagging \.
D file1
D file2"
	  dotest head-o1 "${testcvs} admin -o ::br1" \
"${SPROG} admin: Administrating \.
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
deleting revision 1\.3\.2\.1
done
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
done"

	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	tagdate)
	  # Test combining -r and -D.
	  #
	  # Note that this is not a complete test.  It relies on the fact
	  # that update, checkout and export have a LOT of shared code.
	  # Notice:
	  #	1)  checkout is never tested at all with -r -D
	  #	2)  update never uses an argument to '-D' besides 'now'
	  #		(this test does not provide enough data to prove
	  #		that 'cvs update' with both a '-r' and a '-D'
	  #		specified does not ignore '-D': a 'cvs up
	  #		-r<branch> -Dnow' and a 'cvs up -r<branch>'
	  #		should specify the same file revision).
	  #	3)  export uses '-r<branch> -D<when there was a different
	  #		revision>', hopefully completing this behavior test
	  #		for checkout and update as well.
	  #
	  mkdir 1; cd 1
	  save_TZ=$TZ
	  TZ=UTC0; export TZ
	  dotest tagdate-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest tagdate-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir

	  echo trunk-1 >file1
	  dotest tagdate-3 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest tagdate-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"
	  date_T1=`getrlogdate -r1.1 first-dir/file1`

	  dotest tagdate-5 "${testcvs} -q tag -b br1" "T file1"
	  dotest tagdate-6 "${testcvs} -q tag -b br2" "T file1"
	  echo trunk-2 >file1
	  dotest tagdate-7 "${testcvs} -q ci -m modify-on-trunk" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1"
	  date_T2=`getrlogdate -r1.2 first-dir/file1`

	  # We are testing -r -D where br1 is a (magic) branch without
	  # any revisions.  First the case where br2 doesn't have any
	  # revisions either:
	  dotest tagdate-8 "${testcvs} -q update -p -r br1 -D now" "trunk-1"
	  dotest tagdate-9 "${testcvs} -q update -r br2" "[UP] file1"
	  echo br2-1 >file1
	  dotest tagdate-10 "${testcvs} -q ci -m modify-on-br2" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.4\.1; previous revision: 1\.1"
	  date_T3=`getrlogdate -r1.1.4.1 first-dir/file1`

	  # Then the case where br2 does have revisions:
	  dotest tagdate-11 "${testcvs} -q update -p -r br1 -D now" "trunk-1"

	  # Joins from dates on the head used to be prohibited.
	  dotest tagdate-12 "$testcvs -q update -j:yesterday -j:now"
	  dotest tagdate-12b "$testcvs -Q update -C"
	  # And check export

	  echo br2-2 >file1
	  dotest tagdate-13 "${testcvs} -q ci -m modify-2-on-br2" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.4\.2; previous revision: 1\.1\.4\.1"
	  date_T4=`getrlogdate -r1.1.4.2 first-dir/file1`

	  # Test diff -r<tag>:<date> with two revisions specified.
	  dotest_fail tagdate-13b \
"$testcvs -q diff -u -rbr2:'$date_T3' -rbr2:now file1" \
"Index: file1
===================================================================
RCS file: $CVSROOT_DIRNAME/first-dir/file1,v
retrieving revision 1\.1\.4\.1
retrieving revision 1\.1\.4\.2
diff -u -r1\.1\.4\.1 -r1\.1\.4\.2
--- file1	$RFCDATE	1\.1\.4\.1
+++ file1	$RFCDATE	1\.1\.4\.2
@@ -1 ${PLUS}1 @@
-br2-1
${PLUS}br2-2"

	  # Tag a date on a branch.
	  dotest tagdate-13c "$testcvs -q tag -rbr2:'$date_T3' tagdate" \
"T file1"
	  dotest tagdate-13d "$testcvs -q update -rtagdate" "[UP] file1"
	  dotest tagdate-13e "cat file1" "br2-1"

	  # This one should fail, though currently without an error message,
	  # since a date on a static tag is meaningless.
	  dotest tagdate-13f "$testcvs -q tag -rtagdate:'$date_T3' tagdate"

	  # and restore to using the trunk for future tests.
	  dotest tagdate-13g "$testcvs -q up -rbr2" "[UP] file1"

	  cd ../..
	  mkdir 2; cd 2
	  dotest tagdate-14 \
"$testcvs -q export -r br2 -D'$date_T3' first-dir" \
"[UP] first-dir/file1"
	  dotest tagdate-14b "cat first-dir/file1" "br2-1"
	  dotest tagdate-15 \
"$testcvs -q export -rbr2:'$date_T3' -dsecond-dir first-dir" \
"[UP] second-dir/file1"
	  dotest tagdate-15b "cat second-dir/file1" "br2-1"

	  # Now for annotate
	  cd ../1/first-dir
	  dotest tagdate-16 "${testcvs} annotate -rbr2 -D'$date_T3'" \
"
Annotations for file1
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
1\.1\.4\.1      ($username8 *[0-9a-zA-Z-]*): br2-1"

	  dotest tagdate-17 "${testcvs} annotate -rbr2 -Dnow" \
"
Annotations for file1
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
1\.1\.4\.2      ($username8 *[0-9a-zA-Z-]*): br2-2"

	  # Now check to see what happens when we add files to br2 and trunk
	  echo br2-1 > file3
	  dotest tagdate-18 "${testcvs} add file3" \
"${SPROG} add: scheduling file \`file3' for addition on branch \`br2'
${SPROG} add: use \`${SPROG} commit' to add this file permanently"
	  dotest tagdate-19 "${testcvs} -q ci -m add file3" \
"$CVSROOT_DIRNAME/first-dir/Attic/file3,v  <--  file3
new revision: 1\.1\.2\.1; previous revision: 1\.1"
	  date_T5=`getrlogdate -r1.1 first-dir/file3`
	  date_T6=`getrlogdate -r1.1.2.1 first-dir/file3`

	  cd ../..
	  mkdir 3; cd 3
	  dotest tagdate-20 "${testcvs} -Q co first-dir" ''
	  cd first-dir
	  echo trunk-1 > file2
	  dotest tagdate-21 "${testcvs} add file2" \
"${SPROG} add: scheduling file .file2. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest tagdate-22 "${testcvs} -q ci -m add file2" \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.1"
	  date_T7=`getrlogdate -r1.1 first-dir/file2`
	  echo "trunk-2" >file2
	  dotest tagdate-23 "${testcvs} -q ci -m update file2" \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.2; previous revision: 1\.1"
	  date_T8=`getrlogdate -r1.2 first-dir/file2`

	  cd ../../1/first-dir
	  echo br2-1 > file2
	  dotest tagdate-24 "${testcvs} add file2" \
"${SPROG} add: scheduling file \`file2' for addition on branch \`br2'
${SPROG} add: use \`${SPROG} commit' to add this file permanently"
	  dotest tagdate-25 "${testcvs} -q ci -m add file2" \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.2\.2\.2; previous revision: 1\.2\.2\.1"
	  date_T9=`getrlogdate -r1.2.2.2 first-dir/file2`
	  cd ../..

	  # Time  Rev     Branch  Comments
	  # T0            trunk   first-dir created
	  # T1    1.1     trunk   first-dir/file1 committed "trunk-1"
	  #               br1     branch created
	  #               br2     branch created
	  # T2    1.2     trunk   first-dir/file1 committed "trunk-2"
	  # T3    1.1.4.1 br2     first-dir/file1 committed "br2-1"
	  # +60s
	  # T4    1.1.4.2 br2     first-dir/file1 committed "br2-2"
	  # T5    1.1     trunk   first-dir/file3 dead
	  # T6    1.1.2.1 br2     first-dir/file3 committed "br2-1"
	  # T7    1.1     trunk   first-dir/file2 committed "trunk-1"
	  # T8    1.2     trunk   first-dir/file2 committed "trunk-2"
	  # T8    1.2.2.1 br2     first-dir/file2 dead
	  # T9    1.2.2.2 br2     first-dir/file2 committed "br2-1"
	  # 

	  mkdir 4; cd 4
	  (echo Dates for tagdate-26-* are:;\
	   echo "  date_T1='$date_T1'";\
	   echo "  date_T2='$date_T2'";\
	   echo "  date_T3='$date_T3'";\
	   echo "  date_T4='$date_T4'";\
	   echo "  date_T5='$date_T5'";\
	   echo "  date_T6='$date_T6'";\
	   echo "  date_T7='$date_T7'";\
	   echo "  date_T8='$date_T8'";\
	   echo "  date_T9='$date_T9'") >>$LOGFILE
	  dotest tagdate-26-trunk-t1 \
"${testcvs} co -D'$date_T1' -d first-dir-trunk-t1 first-dir" \
"${SPROG} checkout: Updating first-dir-trunk-t1
U first-dir-trunk-t1/file1"
	  dotest tagdate-26-br2-t1 \
"${testcvs} co -r br2 -D'$date_T1' -d first-dir-br2-t1 first-dir" \
"${SPROG} checkout: Updating first-dir-br2-t1
U first-dir-br2-t1/file1"
	  dotest tagdate-26-trunk-t2 \
"${testcvs} co -D'$date_T2' -d first-dir-trunk-t2 first-dir" \
"${SPROG} checkout: Updating first-dir-trunk-t2
U first-dir-trunk-t2/file1"
	  dotest tagdate-26-br2-t2 \
"${testcvs} co -r br2 -D'$date_T2' -d first-dir-br2-t2 first-dir" \
"${SPROG} checkout: Updating first-dir-br2-t2
U first-dir-br2-t2/file1"
	  dotest tagdate-26-br2-t3 \
"${testcvs} co -r br2 -D'$date_T3' -d first-dir-br2-t3 first-dir" \
"${SPROG} checkout: Updating first-dir-br2-t3
U first-dir-br2-t3/file1"
	  dotest tagdate-26-br2-t4 \
"${testcvs} co -r br2 -D'$date_T4' -d first-dir-br2-t4 first-dir" \
"${SPROG} checkout: Updating first-dir-br2-t4
U first-dir-br2-t4/file1"
	  dotest tagdate-26-br2-t6 \
"${testcvs} co -r br2 -D'$date_T6' -d first-dir-br2-t6 first-dir" \
"${SPROG} checkout: Updating first-dir-br2-t6
U first-dir-br2-t6/file1
U first-dir-br2-t6/file3"
	  dotest tagdate-26-trunk-t7 \
"${testcvs} co -D'$date_T7' -d first-dir-trunk-t7 first-dir" \
"${SPROG} checkout: Updating first-dir-trunk-t7
U first-dir-trunk-t7/file1
U first-dir-trunk-t7/file2"
	  dotest tagdate-26-br2-t7 \
"${testcvs} co -r br2 -D'$date_T7' -d first-dir-br2-t7 first-dir" \
"${SPROG} checkout: Updating first-dir-br2-t7
U first-dir-br2-t7/file1
U first-dir-br2-t7/file3"
	  dotest tagdate-26-trunk-t8 \
"${testcvs} co -D'$date_T8' -d first-dir-trunk-t8 first-dir" \
"${SPROG} checkout: Updating first-dir-trunk-t8
U first-dir-trunk-t8/file1
U first-dir-trunk-t8/file2"
	  dotest tagdate-26-br2-t8 \
"${testcvs} co -r br2 -D'$date_T8' -d first-dir-br2-t8 first-dir" \
"${SPROG} checkout: Updating first-dir-br2-t8
U first-dir-br2-t8/file1
U first-dir-br2-t8/file3"
	  dotest tagdate-26-br2-t9 \
"${testcvs} co -r br2 -D'$date_T9' -d first-dir-br2-t9 first-dir" \
"${SPROG} checkout: Updating first-dir-br2-t9
U first-dir-br2-t9/file1
U first-dir-br2-t9/file2
U first-dir-br2-t9/file3"
	  dotest tagdate-27-trunk-t1 \
"${testcvs} status first-dir-trunk-t1" \
"${SPROG} status: Examining first-dir-trunk-t1
===================================================================
File: file1            	Status: Up-to-date

   Working revision:	1\.1[^.]*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		${RCSDELTADATE}
   Sticky Options:	(none)"
	  dotest tagdate-27-br2-t1 \
"${testcvs} status first-dir-br2-t1" \
"${SPROG} status: Examining first-dir-br2-t1
===================================================================
File: file1            	Status: Needs Patch

   Working revision:	1\.1[^.]*
   Repository revision:	1\.1\.4\.2	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		br2 (branch: 1\.1\.4)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest tagdate-27-trunk-t2 \
"${testcvs} status first-dir-trunk-t2" \
"${SPROG} status: Examining first-dir-trunk-t2
===================================================================
File: file1            	Status: Up-to-date

   Working revision:	1\.2[^.]*
   Repository revision:	1\.2	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		${RCSDELTADATE}
   Sticky Options:	(none)"
	  dotest tagdate-27-br2-t2 \
"${testcvs} status first-dir-br2-t2" \
"${SPROG} status: Examining first-dir-br2-t2
===================================================================
File: file1            	Status: Needs Patch

   Working revision:	1\.1[^.]*
   Repository revision:	1\.1\.4\.2	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		br2 (branch: 1\.1\.4)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest tagdate-27-br2-t3 \
"${testcvs} status first-dir-br2-t3" \
"${SPROG} status: Examining first-dir-br2-t3
===================================================================
File: file1            	Status: Needs Patch

   Working revision:	1\.1\.4\.1[^.]*
   Repository revision:	1\.1\.4\.2	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		br2 (branch: 1\.1\.4)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest tagdate-27-br2-t4 \
"${testcvs} status first-dir-br2-t4" \
"${SPROG} status: Examining first-dir-br2-t4
===================================================================
File: file1            	Status: Up-to-date

   Working revision:	1\.1\.4\.2[^.]*
   Repository revision:	1\.1\.4\.2	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		br2 (branch: 1\.1\.4)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest tagdate-27-br2-t6 \
"${testcvs} status first-dir-br2-t6" \
"${SPROG} status: Examining first-dir-br2-t6
===================================================================
File: file1            	Status: Up-to-date

   Working revision:	1\.1\.4\.2[^.]*
   Repository revision:	1\.1\.4\.2	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		br2 (branch: 1\.1\.4)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file3            	Status: Up-to-date

   Working revision:	1\.1\.2\.1[^.]*
   Repository revision:	1\.1\.2\.1	${CVSROOT_DIRNAME}/first-dir/Attic/file3,v
   Commit Identifier:	${commitid}
   Sticky Tag:		br2 (branch: 1\.1\.2)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest tagdate-27-trunk-t7 \
"${testcvs} status first-dir-trunk-t7" \
"${SPROG} status: Examining first-dir-trunk-t7
===================================================================
File: file1            	Status: Up-to-date

   Working revision:	1\.2[^.]*
   Repository revision:	1\.2	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		${RCSDELTADATE}
   Sticky Options:	(none)

===================================================================
File: file2            	Status: Up-to-date

   Working revision:	1\.1[^.]*
   Repository revision:	1\.1	${CVSROOT_DIRNAME}/first-dir/file2,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		${RCSDELTADATE}
   Sticky Options:	(none)"
	  dotest tagdate-27-br2-t7 \
"${testcvs} status first-dir-br2-t7" \
"${SPROG} status: Examining first-dir-br2-t7
===================================================================
File: file1            	Status: Up-to-date

   Working revision:	1\.1\.4\.2[^.]*
   Repository revision:	1\.1\.4\.2	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		br2 (branch: 1\.1\.4)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file3            	Status: Up-to-date

   Working revision:	1\.1\.2\.1[^.]*
   Repository revision:	1\.1\.2\.1	${CVSROOT_DIRNAME}/first-dir/Attic/file3,v
   Commit Identifier:	${commitid}
   Sticky Tag:		br2 (branch: 1\.1\.2)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest tagdate-27-trunk-t8 \
"${testcvs} status first-dir-trunk-t8" \
"${SPROG} status: Examining first-dir-trunk-t8
===================================================================
File: file1            	Status: Up-to-date

   Working revision:	1\.2[^.]*
   Repository revision:	1\.2	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		${RCSDELTADATE}
   Sticky Options:	(none)

===================================================================
File: file2            	Status: Up-to-date

   Working revision:	1\.2[^.]*
   Repository revision:	1\.2	${CVSROOT_DIRNAME}/first-dir/file2,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		${RCSDELTADATE}
   Sticky Options:	(none)"
	  dotest tagdate-27-br2-t8 \
"${testcvs} status first-dir-br2-t8" \
"${SPROG} status: Examining first-dir-br2-t8
===================================================================
File: file1            	Status: Up-to-date

   Working revision:	1\.1\.4\.2[^.]*
   Repository revision:	1\.1\.4\.2	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		br2 (branch: 1\.1\.4)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file3            	Status: Up-to-date

   Working revision:	1\.1\.2\.1[^.]*
   Repository revision:	1\.1\.2\.1	${CVSROOT_DIRNAME}/first-dir/Attic/file3,v
   Commit Identifier:	${commitid}
   Sticky Tag:		br2 (branch: 1\.1\.2)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  dotest tagdate-27-br2-t9 \
"${testcvs} status first-dir-br2-t9" \
"${SPROG} status: Examining first-dir-br2-t9
===================================================================
File: file1            	Status: Up-to-date

   Working revision:	1\.1\.4\.2[^.]*
   Repository revision:	1\.1\.4\.2	${CVSROOT_DIRNAME}/first-dir/file1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		br2 (branch: 1\.1\.4)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file2            	Status: Up-to-date

   Working revision:	1\.2\.2\.2[^.]*
   Repository revision:	1\.2\.2\.2	${CVSROOT_DIRNAME}/first-dir/file2,v
   Commit Identifier:	${commitid}
   Sticky Tag:		br2 (branch: 1\.2\.2)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file3            	Status: Up-to-date

   Working revision:	1\.1\.2\.1[^.]*
   Repository revision:	1\.1\.2\.1	${CVSROOT_DIRNAME}/first-dir/Attic/file3,v
   Commit Identifier:	${commitid}
   Sticky Tag:		br2 (branch: 1\.1\.2)
   Sticky Date:		(none)
   Sticky Options:	(none)"

	  # Now check the contents of the files
	  dotest tagdate-28-trunk-t1 'cat first-dir-trunk-t1/file1' 'trunk-1'
	  dotest tagdate-28-br2-t1 'cat first-dir-br2-t1/file1' 'trunk-1'
	  dotest tagdate-28-trunk-t2 'cat first-dir-trunk-t2/file1' 'trunk-2'
	  dotest tagdate-28-br2-t2 'cat first-dir-br2-t2/file1' 'trunk-1'
	  dotest tagdate-28-br2-t3 'cat first-dir-br2-t3/file1' 'br2-1'
	  dotest tagdate-28-br2-t4 'cat first-dir-br2-t4/file1' 'br2-2'
	  dotest tagdate-28-br2-t6a 'cat first-dir-br2-t6/file1' "br2-2"
	  dotest tagdate-28-br2-t6b 'cat first-dir-br2-t6/file3' "br2-1"
	  dotest tagdate-28-trunk-t7a 'cat first-dir-trunk-t7/file1' "trunk-2"
	  dotest tagdate-28-trunk-t7b 'cat first-dir-trunk-t7/file2' "trunk-1"
	  dotest tagdate-28-br2-t7a 'cat first-dir-br2-t7/file1' "br2-2"
	  dotest tagdate-28-br2-t7b 'cat first-dir-br2-t7/file3' "br2-1"
	  dotest tagdate-28-trunk-t8a 'cat first-dir-trunk-t8/file1' "trunk-2"
	  dotest tagdate-28-trunk-t8b 'cat first-dir-trunk-t8/file2' "trunk-2"
	  dotest tagdate-28-br2-t8a 'cat first-dir-br2-t8/file1' "br2-2"
	  dotest tagdate-28-br2-t8c 'cat first-dir-br2-t8/file3' "br2-1"
	  dotest tagdate-28-br2-t9a 'cat first-dir-br2-t9/file1' "br2-2"
	  dotest tagdate-28-br2-t9b 'cat first-dir-br2-t9/file2' "br2-1"
	  dotest tagdate-28-br2-t9c 'cat first-dir-br2-t9/file3' "br2-1"
	  cd ..

	  unset date_T1 date_T2 date_T3 date_T4 date_T5
	  unset date_T6 date_T7 date_T8 date_T9
	  TZ=$save_TZ

	  dokeep
	  rm -r 1 2 3 4
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	multibranch2)
	  # Commit the first delta on branch A when there is an older
	  # branch, B, that already has a delta.  A and B come from the
	  # same branch point.  Then verify that branches A and B are
	  # in the right order.
	  mkdir 1; cd 1
	  dotest multibranch2-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest multibranch2-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
	  cd first-dir

	  echo trunk-1 >file1
	  echo trunk-1 >file2
	  dotest multibranch2-3 "${testcvs} add file1 file2" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: scheduling file .file2. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  dotest multibranch2-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.1"
	  dotest multibranch2-5 "${testcvs} -q tag -b A" "T file1
T file2"
	  dotest multibranch2-6 "${testcvs} -q tag -b B" "T file1
T file2"

	  dotest multibranch2-7 "${testcvs} -q update -r B" ''
	  echo branch-B >file1
	  echo branch-B >file2
	  dotest multibranch2-8 "${testcvs} -q ci -m modify-on-B" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.4\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.1\.4\.1; previous revision: 1\.1"

	  dotest multibranch2-9 "${testcvs} -q update -r A" '[UP] file1
[UP] file2'
	  echo branch-A >file1
	  # When using cvs-1.9.20, this commit gets a failed assertion in rcs.c.
	  dotest multibranch2-10 "${testcvs} -q ci -m modify-on-A" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.1; previous revision: 1\.1"

	  dotest multibranch2-11 "${testcvs} -q log file1" \
"
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
	B: 1\.1\.0\.4
	A: 1\.1\.0\.2
keyword substitution: kv
total revisions: 3;	selected revisions: 3
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: $username;  state: Exp;  commitid: ${commitid};
branches:  1\.1\.2;  1\.1\.4;
add
----------------------------
revision 1\.1\.4\.1
date: ${ISO8601DATE};  author: $username;  state: Exp;  lines: ${PLUS}1 -1;  commitid: ${commitid};
modify-on-B
----------------------------
revision 1\.1\.2\.1
date: ${ISO8601DATE};  author: $username;  state: Exp;  lines: ${PLUS}1 -1;  commitid: ${commitid};
modify-on-A
============================================================================="

	  # This one is more concise.
	  dotest multibranch2-12 "${testcvs} -q log -r1.1 file1" \
"
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
	B: 1\.1\.0\.4
	A: 1\.1\.0\.2
keyword substitution: kv
total revisions: 3;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: $username;  state: Exp;  commitid: ${commitid};
branches:  1\.1\.2;  1\.1\.4;
add
============================================================================="

	  # OK, try very much the same thing except we run update -j to
	  # bring the changes from B to A.  Probably tests many of the
	  # same code paths but might as well keep it separate, I guess.

	  dotest multibranch2-13 "${testcvs} -q update -r B" "[UP] file1
[UP] file2"
	  dotest multibranch2-14 "${testcvs} -q update -r A -j B file2" \
"[UP] file2
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
retrieving revision 1.1
retrieving revision 1.1.4.1
Merging differences between 1.1 and 1.1.4.1 into file2"
	  dotest multibranch2-15 "${testcvs} -q ci -m commit-on-A file2" \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.1\.2\.1; previous revision: 1\.1"

	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	tag8k)
	  # In cvs-1.9.27, there is a bug that can cause an abort.
	  # It happens when you commit a change to a ,v file that has
	  # just the right amount of tag/branch info to align one of the
	  # semicolons in the branch info to be on a 8k-byte boundary.
	  # The result: rcsbuf_getkey got an abort.  This failure doesn't
	  # corrupt the ,v file -- that would be really serious.  But it
	  # does leave stale write locks that have to be removed manually.

	  mkdir 1
	  cd 1

	  module=x

	  : > junk
	  dotest tag8k-1 "$testcvs -Q import -m . $module X Y" ''
	  dotest tag8k-2 "$testcvs -Q co $module" ''
	  cd $module

	  file=m
	  : > $file
	  dotest tag8k-3 "$testcvs add $file" \
"$SPROG add: scheduling file .$file. for addition
$SPROG add: use .$SPROG commit. to add this file permanently"
	  dotest tag8k-4 "$testcvs -Q ci -m . $file"

	  # It seems there have to be at least two versions.
	  echo a > $file
	  dotest tag8k-5 "$testcvs -Q ci -m . $file"

	  # Add just under 8K worth of tags.
	  t=TAG---------------------------------------------------------------------
	  t=$t$t
	  t=$t$t$t$t$t
	  # Now $t is 720 bytes long.

	  # Apply some tags with that long prefix.
	  dotest tag8k-6  "$testcvs -Q tag $t-0 $file" ''
	  dotest tag8k-7  "$testcvs -Q tag $t-1 $file" ''
	  dotest tag8k-8  "$testcvs -Q tag $t-2 $file" ''
	  dotest tag8k-9  "$testcvs -Q tag $t-3 $file" ''
	  dotest tag8k-10 "$testcvs -Q tag $t-4 $file" ''
	  dotest tag8k-11 "$testcvs -Q tag $t-5 $file" ''
	  dotest tag8k-12 "$testcvs -Q tag $t-6 $file" ''
	  dotest tag8k-13 "$testcvs -Q tag $t-7 $file" ''
	  dotest tag8k-14 "$testcvs -Q tag $t-8 $file" ''
	  dotest tag8k-15 "$testcvs -Q tag $t-9 $file" ''
	  dotest tag8k-16 "$testcvs -Q tag $t-a $file" ''

	  # Extract the author value.
	  name=`sed -n 's/.*;	author \([^;]*\);.*/\1/p' ${CVSROOT_DIRNAME}/$module/$file,v|sed 1q`

	  # Form a suffix string of length (16 - length($name)).
	  # CAREFUL: this will lose if $name is longer than 16.
	  sed_pattern=`echo $name|sed s/././g`
	  suffix=`echo 1234567890123456|sed s/$sed_pattern//`

	  # Add a final tag with length chosen so that it will push the
	  # offset of the `;' in the 2nd occurrence of `;\tauthor' in the
	  # ,v file to exactly 8192.
	  dotest tag8k-17 "$testcvs -Q tag "x8bytes-$suffix" $file" ''

	  # This commit would fail with 1.9.27.
	  echo a >> $file
	  dotest tag8k-18 "$testcvs -Q ci -m . $file"

	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/$module
	  ;;



	admin)
	  # More "cvs admin" tests.
	  # The basicb-21 test tests rejecting an invalid option.
	  # For -l and -u, see "reserved" and "keyword" tests.
	  # "binfiles" test has a test of "cvs admin -k".
	  # "log2" test has tests of -t and -q options to cvs admin.
	  # "rcs" tests -b option also.
	  # For -o, see:
	  #   admin-22-o1 through admin-23 (various cases not involving ::)
	  #   binfiles2-o* (:rev, rev on trunk; rev:, deleting entire branch)
	  #   basicb-o* (attempt to delete all revisions)
	  #   basica-o1 through basica-o3 (basic :: usage)
	  #   head-o1 (::branch, where this deletes a revision or is noop)
	  #   branches-o1 (::branch, similar, with different branch topology)
	  #   log-o1 (1.3.2.1::)
	  #   binfiles-o1 (1.3:: and ::1.3; binary files)
	  #   binfiles3-9 (binary files)
	  #   Also could be testing:
	  #     1.3.2.6::1.3.2.8
	  #     1.3.2.6::1.3.2
	  #     1.3.2.1::1.3.2.6
	  #     1.3::1.3.2.6 (error?  or synonym for ::1.3.2.6?)
	  # -n: admin, tagf tests.

	  # Test the postadmin hook as a side effect of the rest of the tests.
	  # See the `info' test for notes on where other script hooks are
	  # tested.
	  mkdir 2; cd 2
	  dotest admin-init-1 "$testcvs -Q co CVSROOT"
	  cd CVSROOT
	  echo "ALL $TESTDIR/2/loggit %r %p %c" >>postadmin
	  dotest admin-init-2 "$testcvs -Q ci -mlog-admin"
	  cd .. # 2

	  cat >loggit <<EOF
#!$TESTSHELL
echo \${1+"\$@"} >>$TESTDIR/2/admin-log
EOF
	  # #^@&!^@ Cygwin.
	  if test -n "$remotehost"; then
	    $CVS_RSH $remotehost "chmod +x $TESTDIR/2/loggit"
	  else
	    chmod +x loggit
	  fi
	  cd .. # $TESTDIR


	  mkdir 1; cd 1
	  dotest admin-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest admin-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
          cd first-dir

	  dotest_fail admin-3 "${testcvs} -q admin -i file1" \
"${CPROG} admin: the -i option to admin is not supported
${CPROG} admin: run add or import to create an RCS file
${CPROG} \[admin aborted\]: specify ${CPROG} -H admin for usage information"
	  dotest_fail admin-4 "${testcvs} -q log file1" \
"${SPROG} log: nothing known about file1"
	  dotest_fail admin-4a "${testcvs} -q admin file1" \
"${SPROG} admin: nothing known about file1"

	  # Set up some files, file2 a plain one and file1 with a revision
	  # on a branch.
	  touch file1 file2
	  dotest admin-5 "${testcvs} add file1 file2" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: scheduling file .file2. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  dotest admin-6 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.1"
	  dotest admin-7 "${testcvs} -q tag -b br" "T file1
T file2"
	  dotest admin-8 "${testcvs} -q update -r br" ""
	  echo 'add a line on the branch' >> file1
	  echo 'add a file on the branch' >> file3
	  dotest admin-9a "${testcvs} -q add file3" \
"${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest admin-9b "${testcvs} -q ci -m modify-on-branch" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
new revision: 1\.1\.2\.1; previous revision: 1\.1
$CVSROOT_DIRNAME/first-dir/Attic/file3,v  <--  file3
new revision: 1\.1\.2\.1; previous revision: 1\.1"
	  dotest admin-10 "${testcvs} -q update -A" \
"U file1
${SPROG} update: \`file3' is no longer in the repository"

	  # Check that we can administer files in the repository that
	  # aren't in the working directory.
	  dotest admin-10-1 "${testcvs} admin ." \
"${SPROG} admin: Administrating .
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
done
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
done"
	  dotest admin-10-2 "${testcvs} -q admin file3" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/Attic/file3,v
done"

	  # Try to recurse with a numeric revision arg.
	  # If we wanted to comprehensive about this, we would also test
	  # this for -l, -u, and all the different -o syntaxes.
	  dotest_fail admin-10a "${testcvs} -q admin -b1.1.2" \
"${CPROG} admin: while processing more than one file:
${CPROG} \[admin aborted\]: attempt to specify a numeric revision"
	  dotest_fail admin-10b "${testcvs} -q admin -m1.1:bogus file1 file2" \
"${CPROG} admin: while processing more than one file:
${CPROG} \[admin aborted\]: attempt to specify a numeric revision"

	  # try a bad symbolic revision
	  dotest_fail admin-10c "${testcvs} -q admin -bBOGUS" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
${SPROG} admin: ${CVSROOT_DIRNAME}/first-dir/file1,v: Symbolic name BOGUS is undefined.
${SPROG} admin: RCS file for .file1. not modified\.
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
${SPROG} admin: ${CVSROOT_DIRNAME}/first-dir/file2,v: Symbolic name BOGUS is undefined.
${SPROG} admin: RCS file for .file2. not modified\."

	  # Note that -s option applies to the new default branch, not
	  # the old one.
	  # Also note that the implementation of -a via "rcs" requires
	  # no space between -a and the argument.  However, we expect
	  # to change that once CVS parses options.
	  dotest admin-11 "${testcvs} -q admin -afoo,bar -abaz \
-b1.1.2 -cxx -U -sfoo file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
done"
	  dotest admin-11a "${testcvs} log -N file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch: 1\.1\.2
locks:
access list:
	foo
	bar
	baz
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
branches:  1\.1\.2;
add
----------------------------
revision 1\.1\.2\.1
date: ${ISO8601DATE};  author: ${username};  state: foo;  lines: ${PLUS}1 -0;  commitid: ${commitid};
modify-on-branch
============================================================================="
	  dotest admin-12 "${testcvs} -q admin -bbr file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
done"
	  dotest admin-12a "${testcvs} log -N file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch: 1\.1\.2
locks:
access list:
	foo
	bar
	baz
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
branches:  1\.1\.2;
add
----------------------------
revision 1\.1\.2\.1
date: ${ISO8601DATE};  author: ${username};  state: foo;  lines: ${PLUS}1 -0;  commitid: ${commitid};
modify-on-branch
============================================================================="

	  # "cvs log" doesn't print the comment leader.  RCS 5.7 will print
	  # the comment leader only if one specifies "-V4" to rlog.  So it
	  # seems like the only way to test it is by looking at the RCS file
	  # directly.  This also serves as a test of exporting RCS files
	  # (analogous to the import tests in "rcs").
	  # Rather than try to write a rigorous check for whether the
	  # file CVS exports is valid, we just write a simpler
	  # test for what CVS actually exports, and figure we can revise
	  # the check as needed (within the confines of the RCS5 format as
	  # documented in RCSFILES).
	  # Note that we must accept either 2 or 4 digit year.
	  dotest admin-13 "cat ${CVSROOT_DIRNAME}/first-dir/file1,v" \
"head	1\.1;
branch	1\.1\.2;
access
	foo
	bar
	baz;
symbols
	br:1\.1\.0\.2;
locks;
comment	@xx@;


1\.1
date	${RCSDELTADATE};	author ${username};	state Exp;
branches
	1\.1\.2\.1;
next	;
commitid	${commitid};

1\.1\.2\.1
date	${RCSDELTADATE};	author ${username};	state foo;
branches;
next	;
commitid	${commitid};


desc
@@


1\.1
log
@add
@
text
@@


1\.1\.2\.1
log
@modify-on-branch
@
text
@a0 1
add a line on the branch
@"
	  dotest_fail admin-14-1 "${testcvs} -q admin \
-m1.1.1.1:changed-bogus-log-message file2" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
$SPROG admin: $CVSROOT_DIRNAME/first-dir/file2,v: no such revision 1\.1\.1\.1
$SPROG admin: RCS file for .file2. not modified."
	  dotest admin-14-2 "${testcvs} -q log file2" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
Working file: file2
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
	br: 1\.1\.0\.2
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
add
============================================================================="

	  dotest admin-14-3 "${testcvs} -q admin -aauth3 -aauth2,foo \
-soneone:1.1 -m1.1:changed-log-message -ntagone: file2" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
done"
	  dotest admin-15 "${testcvs} -q log file2" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
Working file: file2
head: 1\.1
branch:
locks: strict
access list:
	auth3
	auth2
	foo
symbolic names:
	tagone: 1\.1
	br: 1\.1\.0\.2
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: oneone;  commitid: ${commitid};
changed-log-message
============================================================================="

	  dotest admin-16 "${testcvs} -q admin \
-A${CVSROOT_DIRNAME}/first-dir/file2,v -b -L -Nbr:1.1 file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
done"
	  dotest admin-17 "${testcvs} -q log file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch:
locks: strict
access list:
	foo
	bar
	baz
	auth3
	auth2
symbolic names:
	br: 1\.1
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
branches:  1\.1\.2;
add
----------------------------
revision 1\.1\.2\.1
date: ${ISO8601DATE};  author: ${username};  state: foo;  lines: ${PLUS}1 -0;  commitid: ${commitid};
modify-on-branch
============================================================================="

	  dotest_fail admin-18 "${testcvs} -q admin -nbr:1.1.2 file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
${SPROG} admin: ${CVSROOT_DIRNAME}/first-dir/file1,v: symbolic name br already bound to 1\.1
${SPROG} admin: RCS file for .file1. not modified\."
	  dotest admin-19 "${testcvs} -q admin -ebaz -ebar,auth3 -nbr file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
done"
	  dotest admin-20 "${testcvs} -q log file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch:
locks: strict
access list:
	foo
	auth2
symbolic names:
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
branches:  1\.1\.2;
add
----------------------------
revision 1.1.2.1
date: ${ISO8601DATE};  author: ${username};  state: foo;  lines: ${PLUS}1 -0;  commitid: ${commitid};
modify-on-branch
============================================================================="

	  # OK, this is starting to get ridiculous, in terms of
	  # testing a feature (access lists) which doesn't do anything
	  # useful, but what about nonexistent files and
	  # relative pathnames in admin -A?
	  dotest_fail admin-19a-nonexist \
"${testcvs} -q admin -A${TESTDIR}/foo/bar file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
${SPROG} admin: Couldn't open rcs file .${TESTDIR}/foo/bar.: No such file or directory
${SPROG} \[admin aborted\]: cannot continue"

	  # In the remote case, we are cd'd off into the temp directory
	  # and so these tests give "No such file or directory" errors.
	  if $remote; then :; else
	    dotest admin-19a-admin "${testcvs} -q admin -A../../cvsroot/first-dir/file2,v file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
done"
	    dotest admin-19a-log "${testcvs} -q log -h -N file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch:
locks: strict
access list:
	foo
	auth2
	auth3
keyword substitution: kv
total revisions: 2
============================================================================="
	  fi # end of tests skipped for remote

	  # Now test that plain -e works right.
	  dotest admin-19a-2 "${testcvs} -q admin -e file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
done"
	  dotest admin-19a-3 "${testcvs} -q log -h -N file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch:
locks: strict
access list:
keyword substitution: kv
total revisions: 2
============================================================================="

	  # Put the access list back, to avoid special cases later.
	  dotest admin-19a-4 "${testcvs} -q admin -afoo,auth2 file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
done"

	  # Add another revision to file2, so we can delete one.
	  echo 'add a line' >> file2
	  dotest admin-21 "${testcvs} -q ci -m modify file2" \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.2; previous revision: 1\.1"
	  dotest admin-22 "${testcvs} -q admin -o1.1 file2" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
deleting revision 1\.1
done"
	  # Test admin -o.  More variants that we could be testing:
	  # * REV: [on branch]
	  # * REV1:REV2 [deleting whole branch]
	  # * high branch numbers (e.g. 1.2.2.3.2.3)
	  # ... and probably others.  See RCS_delete_revs for ideas.

	  echo first rev > aaa
	  dotest admin-22-o1 "${testcvs} add aaa" \
"${SPROG} add: scheduling file .aaa. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest admin-22-o2 "${testcvs} -q ci -m first aaa" \
"$CVSROOT_DIRNAME/first-dir/aaa,v  <--  aaa
initial revision: 1\.1"
	  echo second rev >> aaa
	  dotest admin-22-o3 "${testcvs} -q ci -m second aaa" \
"$CVSROOT_DIRNAME/first-dir/aaa,v  <--  aaa
new revision: 1\.2; previous revision: 1\.1"
	  echo third rev >> aaa
	  dotest admin-22-o4 "${testcvs} -q ci -m third aaa" \
"$CVSROOT_DIRNAME/first-dir/aaa,v  <--  aaa
new revision: 1\.3; previous revision: 1\.2"
	  echo fourth rev >> aaa
	  dotest admin-22-o5 "${testcvs} -q ci -m fourth aaa" \
"$CVSROOT_DIRNAME/first-dir/aaa,v  <--  aaa
new revision: 1\.4; previous revision: 1\.3"
	  echo fifth rev >>aaa
	  dotest admin-22-o6 "${testcvs} -q ci -m fifth aaa" \
"$CVSROOT_DIRNAME/first-dir/aaa,v  <--  aaa
new revision: 1\.5; previous revision: 1\.4"
	  echo sixth rev >> aaa
	  dotest admin-22-o7 "${testcvs} -q ci -m sixth aaa" \
"$CVSROOT_DIRNAME/first-dir/aaa,v  <--  aaa
new revision: 1\.6; previous revision: 1\.5"
	  dotest admin-22-o8 "${testcvs} admin -l1.6 aaa" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/aaa,v
1\.6 locked
done"
	  dotest admin-22-o9 "${testcvs} log -r1.6 aaa" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/aaa,v
Working file: aaa
head: 1\.6
branch:
locks: strict
	${username}: 1\.6
access list:
symbolic names:
keyword substitution: kv
total revisions: 6;	selected revisions: 1
description:
----------------------------
revision 1\.6	locked by: ${username};
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
sixth
============================================================================="
	  dotest_fail admin-22-o10 "${testcvs} admin -o1.5: aaa" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/aaa,v
${SPROG} admin: ${CVSROOT_DIRNAME}/first-dir/aaa,v: can't remove locked revision 1\.6
${SPROG} admin: RCS file for .aaa. not modified\."
	  dotest admin-22-o11 "${testcvs} admin -u aaa" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/aaa,v
1\.6 unlocked
done"
	  dotest admin-22-o12 "${testcvs} admin -o1.5: aaa" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/aaa,v
deleting revision 1\.6
deleting revision 1\.5
done"
	  dotest admin-22-o13 "${testcvs} log aaa" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/aaa,v
Working file: aaa
head: 1\.4
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 4;	selected revisions: 4
description:
----------------------------
revision 1\.4
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
fourth
----------------------------
revision 1\.3
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
third
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
second
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
first
============================================================================="

	  dotest admin-22-o14 "${testcvs} tag -b -r1.3 br1 aaa" "T aaa"
	  dotest admin-22-o15 "${testcvs} update -rbr1 aaa" "U aaa"
	  echo new branch rev >> aaa
	  dotest admin-22-o16 "${testcvs} ci -m new-branch aaa" \
"$CVSROOT_DIRNAME/first-dir/aaa,v  <--  aaa
new revision: 1\.3\.2\.1; previous revision: 1\.3"
	  dotest_fail admin-22-o17 "${testcvs} admin -o1.2:1.4 aaa" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/aaa,v
deleting revision 1\.4
${SPROG} admin: ${CVSROOT_DIRNAME}/first-dir/aaa,v: can't remove branch point 1\.3
${SPROG} admin: RCS file for .aaa. not modified\."
	  dotest admin-22-o18 "${testcvs} update -p -r1.4 aaa" \
"===================================================================
Checking out aaa
RCS:  ${CVSROOT_DIRNAME}/first-dir/aaa,v
VERS: 1\.4
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
first rev
second rev
third rev
fourth rev"
	  echo second branch rev >> aaa
	  dotest admin-22-o19 "${testcvs} ci -m branch-two aaa" \
"$CVSROOT_DIRNAME/first-dir/aaa,v  <--  aaa
new revision: 1\.3\.2\.2; previous revision: 1\.3\.2\.1"
	  echo third branch rev >> aaa
	  dotest admin-22-o20 "${testcvs} ci -m branch-three aaa" \
"$CVSROOT_DIRNAME/first-dir/aaa,v  <--  aaa
new revision: 1\.3\.2\.3; previous revision: 1\.3\.2\.2"
	  echo fourth branch rev >> aaa
	  dotest admin-22-o21 "${testcvs} ci -m branch-four aaa" \
"$CVSROOT_DIRNAME/first-dir/aaa,v  <--  aaa
new revision: 1\.3\.2\.4; previous revision: 1\.3\.2\.3"
	  dotest admin-22-o22 "${testcvs} admin -o:1.3.2.3 aaa" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/aaa,v
deleting revision 1\.3\.2\.1
deleting revision 1\.3\.2\.2
deleting revision 1\.3\.2\.3
done"
	  dotest admin-22-o23 "${testcvs} log aaa" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/aaa,v
Working file: aaa
head: 1\.4
branch:
locks: strict
access list:
symbolic names:
	br1: 1\.3\.0\.2
keyword substitution: kv
total revisions: 5;	selected revisions: 5
description:
----------------------------
revision 1\.4
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
fourth
----------------------------
revision 1\.3
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
branches:  1\.3\.2;
third
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
second
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
first
----------------------------
revision 1\.3\.2\.4
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}4 -0;  commitid: ${commitid};
branch-four
============================================================================="

	  dotest admin-22-o24 "${testcvs} -q update -p -r 1.3.2.4 aaa" \
"first rev
second rev
third rev
new branch rev
second branch rev
third branch rev
fourth branch rev"

	  # The bit here about how there is a "tagone" tag pointing to
	  # a nonexistent revision is documented by rcs.  I dunno, I
	  # wonder whether the "cvs admin -o" should give a warning in
	  # this case.
	  dotest admin-23 "${testcvs} -q log file2" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
Working file: file2
head: 1\.2
branch:
locks: strict
access list:
	auth3
	auth2
	foo
symbolic names:
	tagone: 1\.1
	br: 1\.1\.0\.2
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
modify
============================================================================="

	  dotest admin-25 "cat ${CVSROOT_DIRNAME}/first-dir/file1,v" \
"head	1\.1;
access
	foo
	auth2;
symbols;
locks; strict;
comment	@xx@;


1\.1
date	${RCSDELTADATE};	author ${username};	state Exp;
branches
	1\.1\.2\.1;
next	;
commitid	${commitid};

1\.1\.2\.1
date	${RCSDELTADATE};	author ${username};	state foo;
branches;
next	;
commitid	${commitid};


desc
@@


1\.1
log
@add
@
text
@@


1\.1\.2\.1
log
@modify-on-branch
@
text
@a0 1
add a line on the branch
@"

	  # Tests of cvs admin -n.  Make use of the results of
	  # admin-1 through admin-25.
	  # FIXME: We probably shouldn't make use of those results;
	  # this test is way too long as it is.

	  # tagtwo should be a revision
	  #
	  dotest admin-26-1 "${testcvs} admin -ntagtwo:tagone file2" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
done"
      	  
	  # br1 should be a branch
	  #
	  dotest admin-26-2 "${testcvs} admin -nbr1:br file2" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
done"
      	  
	  # Attach some tags using RCS versions
	  #
	  dotest admin-26-3 "${testcvs} admin -ntagthree:1.1 file2" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
done"

	  dotest admin-26-4 "${testcvs} admin -nbr2:1.1.2 file2"  \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
done"

	  dotest admin-26-5 "${testcvs} admin -nbr4:1.1.0.2 file2"  \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
done"
      	  
	  # Check results so far
	  #
	  dotest admin-26-6 "${testcvs} status -v file2" \
"===================================================================
File: file2            	Status: Up-to-date

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT_DIRNAME}/first-dir/file2,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

   Existing Tags:
	br4                      	(branch: 1\.1\.2)
	br2                      	(branch: 1\.1\.2)
	tagthree                 	(revision: 1\.1)
	br1                      	(branch: 1\.1\.2)
	tagtwo                   	(revision: 1\.1)
	tagone                   	(revision: 1\.1)
	br                       	(branch: 1\.1\.2)"

      	  
	  # Add a couple more revisions
	  #
	  echo "nuthr_line" >> file2
	  dotest admin-27-1 "${testcvs} commit -m nuthr_line file2"  \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.3; previous revision: 1\.2"

	  echo "yet_another" >> file2
	  dotest admin-27-2 "${testcvs} commit -m yet_another file2"  \
"$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
new revision: 1\.4; previous revision: 1\.3"
      	  
	  # Fail trying to reattach existing tag with -n
	  #
	  dotest admin-27-3 "${testcvs} admin -ntagfour:1.1 file2"  \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
done"

	  dotest_fail admin-27-4 "${testcvs} admin -ntagfour:1.3 file2"  \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
${SPROG} admin: ${CVSROOT_DIRNAME}/first-dir/file2,v: symbolic name tagfour already bound to 1\.1
${SPROG} admin: RCS file for .file2. not modified\."
      	  
	  # Succeed at reattaching existing tag, using -N
	  #
	  dotest admin-27-5 "${testcvs} admin -Ntagfour:1.3 file2"  \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
done"
      	  
	  # Fail on some bogus operations
	  # Try to attach to nonexistant tag
	  #
	  dotest_fail admin-28-1 "${testcvs} admin -ntagsix:tagfive file2" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
${SPROG} admin: ${CVSROOT_DIRNAME}/first-dir/file2,v: Symbolic name or revision tagfive is undefined\.
${SPROG} admin: RCS file for .file2. not modified\."
      	  
	  # Try a some nonexisting numeric target tags
	  #
	  dotest_fail admin-28-2 "${testcvs} admin -ntagseven:2.1 file2"  \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
${SPROG} \[admin aborted\]: revision .2\.1. does not exist"

	  dotest_fail admin-28-3 "${testcvs} admin -ntageight:2.1.2 file2"  \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
${SPROG} \[admin aborted\]: revision .2\.1\.2. does not exist"
      	  
	  # Try some invalid targets
	  #
	  dotest_fail admin-28-4 "${testcvs} admin -ntagnine:1.a.2 file2"  \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
${SPROG} \[admin aborted\]: tag .1\.a\.2. must start with a letter"

	  # Confirm that a missing tag is not a fatal error.
	  dotest admin-28-5.1 "${testcvs} -Q tag BO+GUS file1" ''
	  dotest_fail admin-28-5.2 "${testcvs} admin -ntagten:BO+GUS file2 file1"  \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
${SPROG} admin: ${CVSROOT_DIRNAME}/first-dir/file2,v: Symbolic name or revision BO${PLUS}GUS is undefined\.
${SPROG} admin: RCS file for .file2. not modified\.
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
done"

	  dotest_fail admin-28-6 "${testcvs} admin -nq.werty:tagfour file2"  \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
${SPROG} \[admin aborted\]: tag .q\.werty. must not contain the characters ..*"

	  # Verify the archive
	  #
	  dotest admin-29 "cat ${CVSROOT_DIRNAME}/first-dir/file2,v" \
"head	1\.4;
access
	auth3
	auth2
	foo;
symbols
	tagfour:1\.3
	br4:1\.1\.0\.2
	br2:1\.1\.0\.2
	tagthree:1\.1
	br1:1\.1\.0\.2
	tagtwo:1\.1
	tagone:1\.1
	br:1\.1\.0\.2;
locks; strict;
comment	@# @;


1\.4
date	${RCSDELTADATE};	author ${username};	state Exp;
branches;
next	1\.3;
commitid	${commitid};

1\.3
date	${RCSDELTADATE};	author ${username};	state Exp;
branches;
next	1\.2;
commitid	${commitid};

1\.2
date	${RCSDELTADATE};	author ${username};	state Exp;
branches;
next	;
commitid	${commitid};


desc
@@


1\.4
log
@yet_another
@
text
@add a line
nuthr_line
yet_another
@


1\.3
log
@nuthr_line
@
text
@d3 1
@


1\.2
log
@modify
@
text
@d2 1
@"

	  dotest_fail admin-30 "${testcvs} admin -mbr:another-log-message \
file2 aaa file3" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
${SPROG} admin: ${CVSROOT_DIRNAME}/first-dir/file2,v: no such revision br: 1\.1
${SPROG} admin: RCS file for .file2. not modified.
RCS file: ${CVSROOT_DIRNAME}/first-dir/aaa,v
${SPROG} admin: ${CVSROOT_DIRNAME}/first-dir/aaa,v: no such revision br
${SPROG} admin: RCS file for .aaa. not modified.
RCS file: ${CVSROOT_DIRNAME}/first-dir/Attic/file3,v
done"
	  dotest admin-31 "${testcvs} log" \
"${SPROG} log: Logging \.

RCS file: ${CVSROOT_DIRNAME}/first-dir/aaa,v
Working file: aaa
head: 1\.4
branch:
locks: strict
access list:
symbolic names:
	br1: 1\.3\.0\.2
keyword substitution: kv
total revisions: 5;	selected revisions: 5
description:
----------------------------
revision 1\.4
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
fourth
----------------------------
revision 1\.3
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
branches:  1\.3\.2;
third
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
second
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
first
----------------------------
revision 1\.3\.2\.4
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}4 -0;  commitid: ${commitid};
branch-four
=============================================================================

RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch:
locks: strict
access list:
	foo
	auth2
symbolic names:
	tagten: 1\.1
	BO${PLUS}GUS: 1\.1
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
branches:  1\.1\.2;
add
----------------------------
revision 1\.1\.2\.1
date: ${ISO8601DATE};  author: ${username};  state: foo;  lines: ${PLUS}1 -0;  commitid: ${commitid};
modify-on-branch
=============================================================================

RCS file: ${CVSROOT_DIRNAME}/first-dir/file2,v
Working file: file2
head: 1\.4
branch:
locks: strict
access list:
	auth3
	auth2
	foo
symbolic names:
	tagfour: 1\.3
	br4: 1\.1\.0\.2
	br2: 1\.1\.0\.2
	tagthree: 1\.1
	br1: 1\.1\.0\.2
	tagtwo: 1\.1
	tagone: 1\.1
	br: 1\.1\.0\.2
keyword substitution: kv
total revisions: 3;	selected revisions: 3
description:
----------------------------
revision 1\.4
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
yet_another
----------------------------
revision 1\.3
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
nuthr_line
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
modify
=============================================================================

RCS file: ${CVSROOT_DIRNAME}/first-dir/Attic/file3,v
Working file: file3
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
	br: 1\.1\.0\.2
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: dead;  commitid: ${commitid};
branches:  1\.1\.2;
file file3 was initially added on branch br\.
----------------------------
revision 1\.1\.2\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
another-log-message
============================================================================="

	  # Currently, this test outputs 36 identical lines, so I am just
	  # checking $DOTSTAR for brevity.
	  dotest admin-postadmin-examine-1 "cat $TESTDIR/2/admin-log" \
"$CVSROOT_DIRNAME first-dir admin$DOTSTAR"

	  dokeep

	  # clean up our after ourselves
	  restore_adm
	  cd ../..
	  rm -r 1 2
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	reserved)
	  # Tests of reserved checkouts.  Eventually this will test
	  # rcslock.pl (or equivalent) and all kinds of stuff.  Right
	  # now it just does some very basic checks on cvs admin -u
	  # and cvs admin -l.
	  # Also should test locking on a branch (and making sure that
	  # locks from one branch don't get mixed up with those from
	  # another.  Both the case where one of the branches is the
	  # main branch, and in which neither one is).
	  # See also test keyword, which tests that keywords and -kkvl
	  # do the right thing in the presence of locks.

	  # The usual setup, directory first-dir containing file file1.
	  mkdir 1; cd 1
	  dotest reserved-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest reserved-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
          cd first-dir
	  touch file1
	  dotest reserved-3 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest reserved-4 "${testcvs} -q ci -m add" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1"

	  dotest reserved-5 "${testcvs} -q admin -l file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
1\.1 locked
done"
	  dotest reserved-6 "${testcvs} log -N file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch:
locks: strict
	${username}: 1\.1
access list:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1	locked by: ${username};
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
add
============================================================================="

	  # Note that this just tests the owner of the lock giving
	  # it up.  It doesn't test breaking a lock.
	  dotest reserved-7 "${testcvs} -q admin -u file1" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
1\.1 unlocked
done"

	  dotest reserved-8 "${testcvs} log -N file1" "
RCS file: ${CVSROOT_DIRNAME}/first-dir/file1,v
Working file: file1
head: 1\.1
branch:
locks: strict
access list:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
add
============================================================================="

	  # rcslock.pl tests.  Of course, the point isn't to test
	  # rcslock.pl from the distribution but equivalent
	  # functionality (for example, many sites may have an old
	  # rcslock.pl).  The functionality of this hook falls
	  # short of the real rcslock.pl though.
	  # Note that we can use rlog or look at the RCS file directly,
	  # but we can't use "cvs log" because "cvs commit" has a lock.

	  cat >${TESTDIR}/lockme <<EOF
#!${TESTSHELL}
line=\`grep <\$1/\$2,v 'locks $anyusername:1\.[0-9];'\`
if test -z "\$line"; then
  # It isn't locked
  exit 0
else
  user=\`echo \$line | sed -e 's/locks \\($anyusername\\):[0-9.]*;.*/\\1/'\`
  version=\`echo \$line | sed -e 's/locks $anyusername:\\([0-9.]*\\);.*/\\1/'\`
  echo "\$user has file a-lock locked for version  \$version" >&2
  exit 1
fi
EOF
	  # Cygwin.  Blaaarg.
	  if test -n "$remotehost"; then
	    $CVS_RSH $remotehost "chmod +x ${TESTDIR}/lockme"
	  else
	    chmod +x ${TESTDIR}/lockme
	  fi

	  echo stuff > a-lock
	  dotest reserved-9 "${testcvs} add a-lock" \
"${SPROG} add: scheduling file .a-lock. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest reserved-10 "${testcvs} -q ci -m new a-lock" \
"$CVSROOT_DIRNAME/first-dir/a-lock,v  <--  a-lock
initial revision: 1\.1"
	  # FIXME: the contents of CVSROOT fluctuate a lot
	  # here. Maybe the expect pattern should just
	  # confirm that commitinfo is one of the files checked out,
	  # but for now we just check that CVS exited with success.
	  cd ..
	  if ${testcvs} -q co CVSROOT >>${LOGFILE} ; then
	    pass reserved-11
	  else
	    fail reserved-11
	  fi
	  cd CVSROOT
	  echo "DEFAULT ${TESTDIR}/lockme" >>commitinfo
	  dotest reserved-12 "${testcvs} -q ci -m rcslock commitinfo" \
"$CVSROOT_DIRNAME/CVSROOT/commitinfo,v  <--  commitinfo
new revision: 1\.2; previous revision: 1\.1
$SPROG commit: Rebuilding administrative file database"
	  cd ..; cd first-dir

	  # Simulate (approximately) what a-lock would look like
	  # if someone else had locked revision 1.1.
	  sed -e 's/locks; strict;/locks fred:1.1; strict;/' ${CVSROOT_DIRNAME}/first-dir/a-lock,v > a-lock,v
	  # Cygwin.
	  if test -n "$remotehost"; then
	    $CVS_RSH $remotehost "chmod 644 ${CVSROOT_DIRNAME}/first-dir/a-lock,v"
	  else
	    chmod 644 ${CVSROOT_DIRNAME}/first-dir/a-lock,v
	  fi
	  dotest reserved-13 "mv a-lock,v ${CVSROOT_DIRNAME}/first-dir/a-lock,v"
	  # Cygwin.  Blah.
	  if test -n "$remotehost"; then
	    $CVS_RSH $remotehost "chmod 444 ${CVSROOT_DIRNAME}/first-dir/a-lock,v"
	  else
	    chmod 444 ${CVSROOT_DIRNAME}/first-dir/a-lock,v
	  fi
	  echo more stuff >> a-lock
	  dotest_fail_sort reserved-13b "$testcvs ci -m '' a-lock" \
"    \"$TESTDIR/lockme\"
Appending defaults (\" %r/%p %s\"), but please be aware that this usage is
$SPROG \[commit aborted\]: correct above errors first!
$SPROG commit: Pre-commit check failed
$SPROG commit: warning: commitinfo line contains no format strings:
deprecated\.
fred has file a-lock locked for version  1\.1"
	  # OK, now test "cvs admin -l" in the case where someone
	  # else has the file locked.
	  dotest_fail reserved-13c "${testcvs} admin -l a-lock" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/a-lock,v
${SPROG} \[admin aborted\]: Revision 1\.1 is already locked by fred"

	  dotest reserved-14 "${testcvs} admin -u1.1 a-lock" \
"RCS file: ${CVSROOT_DIRNAME}/first-dir/a-lock,v
${SPROG} admin: ${CVSROOT_DIRNAME}/first-dir/a-lock,v: revision 1\.1 locked by fred; breaking lock
1\.1 unlocked
done"
	  dotest reserved-15 "$testcvs -q ci -m success a-lock" \
"$SPROG commit: warning: commitinfo line contains no format strings:
    \"$TESTDIR/lockme\"
Appending defaults (\" %r/%p %s\"), but please be aware that this usage is
deprecated\.
$CVSROOT_DIRNAME/first-dir/a-lock,v  <--  a-lock
new revision: 1\.2; previous revision: 1\.1"

	  # Now test for a bug involving branches and locks
	  sed -e 's/locks; strict;/locks fred:1.2; strict;/' ${CVSROOT_DIRNAME}/first-dir/a-lock,v > a-lock,v
	  chmod 644 ${CVSROOT_DIRNAME}/first-dir/a-lock,v
	  dotest reserved-16 \
"mv a-lock,v ${CVSROOT_DIRNAME}/first-dir/a-lock,v" ""
	  chmod 444 ${CVSROOT_DIRNAME}/first-dir/a-lock,v
	  dotest reserved-17 "${testcvs} -q tag -b br a-lock" "T a-lock"
	  dotest reserved-18 "${testcvs} -q update -r br a-lock" ""
	  echo edit it >>a-lock
	  dotest reserved-19 "${testcvs} -q ci -m modify a-lock" \
"$SPROG commit: warning: commitinfo line contains no format strings:
    \"$TESTDIR/lockme\"
Appending defaults (\" %r/%p %s\"), but please be aware that this usage is
deprecated\.
$CVSROOT_DIRNAME/first-dir/a-lock,v  <--  a-lock
new revision: 1\.2\.2\.1; previous revision: 1\.2"

	  # undo commitinfo changes
	  cd ../CVSROOT
	  echo '# vanilla commitinfo' >commitinfo
	  dotest reserved-cleanup-1 "${testcvs} -q ci -m back commitinfo" \
"$SPROG commit: warning: commitinfo line contains no format strings:
    \"$TESTDIR/lockme\"
Appending defaults (\" %r/%p %s\"), but please be aware that this usage is
deprecated\.
$CVSROOT_DIRNAME/CVSROOT/commitinfo,v  <--  commitinfo
new revision: 1\.3; previous revision: 1\.2
$SPROG commit: Rebuilding administrative file database"

	  dokeep
	  cd ..; rm -r CVSROOT
	  cd ..
	  rm -r 1
	  rm $TESTDIR/lockme
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



        diffmerge1)
	  # Make sure CVS can merge correctly in circumstances where it
	  # used to mess up (due to a bug which existed in diffutils 2.7
	  # and 2.6, but not 2.5, and which has been fixed in CVS's diff
	  # lib by Paul Eggert, bless his bitty heart).

	  # This first test involves two working copies, "mine" and
	  # "yours", checked out from the same repository at the same
	  # time.  In yours, you remove some text from the end of the
	  # file and check it in; meanwhile, "me" has commented out some
	  # lines earlier in the file, and I go to check it in right
	  # after you checked yours in.  CVS naturally tells me the file
	  # is not up-to-date, so I run cvs update, but it updates
	  # incorrectly, leaving in the lines of text you just deleted.
	  # Bad!  I'm in too much of a hurry to actually look at the
	  # file, so I check it in and go home, and so your changes have
	  # been lost.  Later you discover this, and you suspect me of
	  # deliberately sabotaging your work, so you let all the air
	  # out of my tires.  Only after a series of expensive lawsuits
	  # and countersuits do we discover that this was all CVS's
	  # fault.
	  #
	  # Luckily, this problem has been fixed now, as our test will
	  # handily confirm, no doubt:

	  # First make a repository containing the original text:

	  # We should be here anyway, but cd to it just in case:
	  cd ${TESTDIR}

	  mkdir diffmerge1
	  cd diffmerge1

	  # These are the files we both start out with:
	  mkdir import
	  cd import
	  diffmerge_create_older_files

	  dotest diffmerge1_import \
	    "${testcvs} import -m import diffmerge1 tag1 tag2" \
	    "${DOTSTAR}No conflicts created by this import"
	  cd ..

	  # Check out two working copies, one for "you" and one for
	  # "me".  If no branch is used and cvs detects that only one
	  # of the two people made changes, then cvs does not run the
	  # merge algorithm.  But if a branch is used, then cvs does run
	  # the merge algorithm (even in this case of only one of the two
	  # people having made changes).  CVS used to have a bug in this
	  # case.  Therefore, it is important to test this case by
	  # using a branch:
	  ${testcvs} rtag     -b tag diffmerge1 >/dev/null 2>&1
	  ${testcvs} checkout -r tag diffmerge1 >/dev/null 2>&1
	  mv diffmerge1 yours
	  ${testcvs} checkout diffmerge1 >/dev/null 2>&1
	  mv diffmerge1 mine

	  # In your working copy, you'll make changes, and
	  # then check in your changes before I check in mine:
	  cd yours
	  diffmerge_create_your_files
          dotest diffmerge1_yours "${testcvs} -q ci -m yours" \
"$CVSROOT_DIRNAME/diffmerge1/testcase01,v  <--  testcase01
new revision: 1\.1\.1\.1\.2\.1; previous revision: 1\.1\.1\.1
$CVSROOT_DIRNAME/diffmerge1/testcase02,v  <--  testcase02
new revision: 1\.1\.1\.1\.2\.1; previous revision: 1\.1\.1\.1
$CVSROOT_DIRNAME/diffmerge1/testcase03,v  <--  testcase03
new revision: 1\.1\.1\.1\.2\.1; previous revision: 1\.1\.1\.1
$CVSROOT_DIRNAME/diffmerge1/testcase04,v  <--  testcase04
new revision: 1\.1\.1\.1\.2\.1; previous revision: 1\.1\.1\.1
$CVSROOT_DIRNAME/diffmerge1/testcase05,v  <--  testcase05
new revision: 1\.1\.1\.1\.2\.1; previous revision: 1\.1\.1\.1
$CVSROOT_DIRNAME/diffmerge1/testcase06,v  <--  testcase06
new revision: 1\.1\.1\.1\.2\.1; previous revision: 1\.1\.1\.1
$CVSROOT_DIRNAME/diffmerge1/testcase07,v  <--  testcase07
new revision: 1\.1\.1\.1\.2\.1; previous revision: 1\.1\.1\.1
$CVSROOT_DIRNAME/diffmerge1/testcase08,v  <--  testcase08
new revision: 1\.1\.1\.1\.2\.1; previous revision: 1\.1\.1\.1
$CVSROOT_DIRNAME/diffmerge1/testcase09,v  <--  testcase09
new revision: 1\.1\.1\.1\.2\.1; previous revision: 1\.1\.1\.1
$CVSROOT_DIRNAME/diffmerge1/testcase10,v  <--  testcase10
new revision: 1\.1\.1\.1\.2\.1; previous revision: 1\.1\.1\.1"

	  # Change my copy.  Then I
	  # update, after both my modifications and your checkin:
	  cd ../mine
	  diffmerge_create_my_files
	  dotest diffmerge1_mine "${testcvs} -q update -j tag" \
"M testcase01
RCS file: ${CVSROOT_DIRNAME}/diffmerge1/testcase01,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.1\.1\.1\.2\.1
Merging differences between 1\.1\.1\.1 and 1\.1\.1\.1\.2\.1 into testcase01
M testcase02
RCS file: ${CVSROOT_DIRNAME}/diffmerge1/testcase02,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.1\.1\.1\.2\.1
Merging differences between 1\.1\.1\.1 and 1\.1\.1\.1\.2\.1 into testcase02
M testcase03
RCS file: ${CVSROOT_DIRNAME}/diffmerge1/testcase03,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.1\.1\.1\.2\.1
Merging differences between 1\.1\.1\.1 and 1\.1\.1\.1\.2\.1 into testcase03
M testcase04
RCS file: ${CVSROOT_DIRNAME}/diffmerge1/testcase04,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.1\.1\.1\.2\.1
Merging differences between 1\.1\.1\.1 and 1\.1\.1\.1\.2\.1 into testcase04
RCS file: ${CVSROOT_DIRNAME}/diffmerge1/testcase05,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.1\.1\.1\.2\.1
Merging differences between 1\.1\.1\.1 and 1\.1\.1\.1\.2\.1 into testcase05
RCS file: ${CVSROOT_DIRNAME}/diffmerge1/testcase06,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.1\.1\.1\.2\.1
Merging differences between 1\.1\.1\.1 and 1\.1\.1\.1\.2\.1 into testcase06
M testcase07
RCS file: ${CVSROOT_DIRNAME}/diffmerge1/testcase07,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.1\.1\.1\.2\.1
Merging differences between 1\.1\.1\.1 and 1\.1\.1\.1\.2\.1 into testcase07
testcase07 already contains the differences between 1\.1\.1\.1 and 1\.1\.1\.1\.2\.1
M testcase08
RCS file: ${CVSROOT_DIRNAME}/diffmerge1/testcase08,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.1\.1\.1\.2\.1
Merging differences between 1\.1\.1\.1 and 1\.1\.1\.1\.2\.1 into testcase08
M testcase09
RCS file: ${CVSROOT_DIRNAME}/diffmerge1/testcase09,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.1\.1\.1\.2\.1
Merging differences between 1\.1\.1\.1 and 1\.1\.1\.1\.2\.1 into testcase09
M testcase10
RCS file: ${CVSROOT_DIRNAME}/diffmerge1/testcase10,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.1\.1\.1\.2\.1
Merging differences between 1\.1\.1\.1 and 1\.1\.1\.1\.2\.1 into testcase10"

	  # So if your changes didn't make it into my working copy, or
	  # in any case if the files do not look like the final text
	  # in the files in directory comp_me, then the test flunks:
	  cd ..
	  mkdir comp_me
	  cd comp_me
	  diffmerge_create_expected_files
	  cd ..
	  rm mine/.#*

	  # If you have GNU's version of diff, you may try
	  # uncommenting the following line which will give more
	  # fine-grained information about how cvs differed from the
	  # correct result:
	  #dotest diffmerge1_cmp "diff -u --recursive --exclude=CVS comp_me mine" ''
	  dotest diffmerge1_cmp "directory_cmp comp_me mine"

	  # Clean up after ourselves:
	  dokeep
	  cd ..
	  rm -r diffmerge1
	  modify_repo rm -rf $CVSROOT_DIRNAME/diffmerge1
	  ;;



        diffmerge2)

	  # FIXME: This test should be rewritten to be much more concise.
	  # It currently weighs in at something like 600 lines, but the
	  # same thing could probably be tested in more like 50-100 lines.
	  mkdir diffmerge2

	  # This tests for another diffmerge bug reported by Martin
	  # Tomes; actually, his bug was probably caused by an initial
	  # fix for the bug in test diffmerge1, and likely wasn't ever
	  # a problem in CVS as long as one was using a normal
	  # distribution of diff or a version of CVS that has the diff
	  # lib in it. 
	  #
	  # Nevertheless, once burned twice cautious, so we test for his
	  # bug here.
	  #
	  # Here is his report, more or less verbatim:
	  # ------------------------------------------
	  #
	  # Put the attached file (sgrid.h,v) into your repository
	  # somewhere, check out the module and do this:
	  #
	  # cvs update -j Review_Phase_2_Enhancements sgrid.h
	  # cvs diff -r Review_V1p3 sgrid.h
	  #
	  # As there have been no changes made on the trunk there
	  # should be no differences, however this is output:
	  #
	  # % cvs diff -r Review_V1p3 sgrid.h
	  # Index: sgrid.h
	  # ===================================================================
	  # RCS file: /usr/local/repository/play/fred/sgrid.h,v
	  # retrieving revision 1.1.2.1
	  # diff -r1.1.2.1 sgrid.h
	  # 178a179,184
	  # > /*--------------------------------------------------------------
	  # > INLINE FUNCTION    :    HORIZONTALLINES
	  # > NOTES              :    Description at the end of the file
	  # > ----------------------------------------------------------------*/
	  # >         uint16 horizontalLines( void );
	  # >
	  #
	  # I did a cvs diff -c -r 1.1 -r 1.1.2.1 sgrid.h and patched those
	  # differences to sgrid.h version 1.1 and got the correct result
	  # so it looks like the built in patch is faulty.
	  # -------------------------------------------------------------------
	  #
	  # This is the RCS file, sgrid.h,v, that he sent:

	  echo "head	1.1;
access;
symbols
	Review_V1p3:1.1.2.1
	Review_V1p3C:1.1.2.1
	Review_1p3A:1.1.2.1
	Review_V1p3A:1.1.2.1
	Review_Phase_2_Enhancements:1.1.0.2
	Review_V1p2:1.1
	Review_V1p2B:1.1
	Review_V1p2A:1.1
	Review_V1p1:1.1
	Review_1p1:1.1;
locks; strict;
comment	@ * @;


1.1
date	97.04.02.11.20.05;	author colinl;	state Exp;
branches
	1.1.2.1;
next	;

1.1.2.1
date	97.06.09.10.00.07;	author colinl;	state Exp;
branches;
next	;


desc
@@


1.1
log
@Project:     DEV1175
DCN:
Tested By:   Colin Law
Reviewed By:
Reason for Change: Initial Revision of all files

Design Change Details:

Implications:
@
text
@/* \$""Header:   L:/gpanels/dis/sgrid.h_v   1.1.1.0   24 Jan 1996 14:59:20   PAULT  \$ */
/*
 * \$""Log:   L:/gpanels/dis/sgrid.h_v  \$
 * 
 *    Rev 1.1.1.0   24 Jan 1996 14:59:20   PAULT
 * Branched
 * 
 *    Rev 1.1   24 Jan 1996 12:09:52   PAULT
 * Consolidated 4100 code merged to trunk
 * 
 *    Rev 1.0.2.0   01 Jun 1995 14:18:58   DAVEH
 * Branched
 * 
 *    Rev 1.0   19 Apr 1995 16:32:48   COLINL
 * Initial revision.
*/
/*****************************************************************************
FILE        :   SGRID.H
VERSION     :   2.1
AUTHOR      :   Dave Hartley
SYSTEM      :   Borland C++
DESCRIPTION :   The declaration of the scrolling grid class
                  
*****************************************************************************/
#if !defined(__SGRID_H)
#define __SGRID_H

#if !defined(__SCROLL_H)
#include <scroll.h>
#endif

#if !defined(__GKI_H)
#include \"gki.h\"
#endif

#if defined PRINTING_SUPPORT
class Printer;
#endif

/*****************************************************************************
CLASS      :    ScrollingGrid   
DESCRIPTION:    This class inherits from a grid and a scrollable, and
                can therefore use all the PUBLIC services provided by these
                classes. A description of these can be found in
                GRID.H and SCROLL.H.
                A scrolling grid is a set of horizontal and vertical lines
                that scroll and continually update to provide a complete grid

*****************************************************************************/

class ScrollingGrid : public Scrollable
{
    public:
#if defined _WINDOWS
/*---------------------------------------------------------------------------
FUNCTION    :   CONSTRUCTOR
DESCRIPTION :   sets up the details of the grid, ready for painting
ARGUMENTS   :   name  : sgColour
                        - the colour of the grid
                        sgLineType
                        - the syle of line
                        sgHorizontalTotal
                        - the total number of horizontal grid lines
                        verticalSpacingMin
                        - the min distance between the vertical grid lines
                          on the scrolling axis
                        currentTimestamp
                        - timestamp value now
                        ticksPerSecond
                        - number of timestamp ticks per second
                        ticksPerPixel
                        - number of timestamp ticks per pixel required
                      
RETURN      :   None
NOTES       :   
---------------------------------------------------------------------------*/
        ScrollingGrid( GkiColour sgColour, GkiLineType sgLineType, 
            uint16 sgHorizontalTotal, 
            uint16 verticalSpacingMin, uint32 currentTimestamp, 
            uint16 ticksPerSecond, uint32 ticksPerPixel );
#else
/*---------------------------------------------------------------------------
FUNCTION    :   CONSTRUCTOR
DESCRIPTION :   sets up the details of the grid, ready for painting
ARGUMENTS   :   name  : sgColour
                        - the colour of the grid
                        sgLineType
                        - the syle of line
                        sgHorizontalTotal ( THE MAX NUMBER OF LINES IS 100 )
                        - the total number of horizontal grid lines
                        sgVerticalSpacing
                        - the distance between the vertical grid lines
                        on the scrolling axis
                      
RETURN      :   None
NOTES       :   If the caller does not get the total grid lines value, synced
                with the overall size of the viewport, the spacing between
                grid lines will not be consistent.

---------------------------------------------------------------------------*/
        ScrollingGrid( GkiColour sgColour, GkiLineType sgLineType
                     , uint16 sgHorizontalTotal, uint16 sgVerticalSpacing );
#endif
/*---------------------------------------------------------------------------
FUNCTION    :   DESTRUCTOR
DESCRIPTION :   tidies it all up
ARGUMENTS   :   name  :      
                      
RETURN      :   None
NOTES       : 
---------------------------------------------------------------------------*/
        ~ScrollingGrid( void );

/*---------------------------------------------------------------------------
FUNCTION    :   ATTACH
DESCRIPTION :   This service overloads the base class service, as it does
                additional work at the time of attachment.

ARGUMENTS   :   name  : tDrawingArea
                        - the scrolled viewport to attach this trend to
                      
RETURN      :   None
NOTES       :
---------------------------------------------------------------------------*/
        void attach( SViewport *tDrawingArea );

#if defined _WINDOWS
/*---------------------------------------------------------------------------
FUNCTION    :   calculateVerticalSpacing
DESCRIPTION :   determines optimum spacing along time axis
ARGUMENTS   :   
RETURN      :   None
NOTES       : 
---------------------------------------------------------------------------*/
        void calculateVerticalSpacing();

/*---------------------------------------------------------------------------
FUNCTION    :   gridSpacingTicks
DESCRIPTION :   Provides the grid spacing in the time axis in ticks
ARGUMENTS   :   
RETURN      :   Number of ticks
NOTES       : 
---------------------------------------------------------------------------*/
        uint32 gridSpacingTicks();

#endif

/*---------------------------------------------------------------------------
INLINE FUNCTION    :    HORIZONTALLINES
NOTES              :    Description at the end of the file
---------------------------------------------------------------------------*/
        uint16 horizontalLines( void );

#if defined _WINDOWS
// In Windows the OnDraw() function replaces paint()
/*---------------------------------------------------------------------------
FUNCTION    :   ScrollingGrid OnDraw   
DESCRIPTION :   Paints the given area of the grid.
                Pure virtual
ARGUMENTS   :   pDC     pointer to the device context to use for display
                        Note that the device context operates in the coords
                        of the window owning the viewport
RETURN      :   None
NOTES       : 
---------------------------------------------------------------------------*/
        virtual void OnDraw( CDC *pDC );

#else   // not Windows            

/*---------------------------------------------------------------------------
FUNCTION    :   PAINT
DESCRIPTION :   This extends the standard grid paint method to paint the
                viewport relative to its current position. 
                
ARGUMENTS   :   name  :      
                      
RETURN      :   None
NOTES       : 
---------------------------------------------------------------------------*/
        void paint( void );
#endif

/*---------------------------------------------------------------------------
FUNCTION    :   P A I N T   T E X T   M A R K E R S 
DESCRIPTION :   this service allow the text markers to be painted seperatley
                from the grid lines

ARGUMENTS   :   name : 
                                                                          
RETURN      :   None
NOTES       : 
---------------------------------------------------------------------------*/
        void paintTextMarkers();

#if defined PRINTING_SUPPORT
/*---------------------------------------------------------------------------
FUNCTION    :   P R I N T 
DESCRIPTION :   This print service prints a grid marker ( being either a
                timestamp or a date, IF there is one at the plot position
                given

ARGUMENTS   :   name :
                        displayPosition
                        - Where in the log to look to see if there is an
                          entry to print

                        - printerPtr
                          the printer to print to
                                                                          
RETURN      :   None
NOTES       : 
---------------------------------------------------------------------------*/
        void print( uint16 currentPrintPos, Printer *printerPtr );
#endif

/*---------------------------------------------------------------------------
FUNCTION    :   S E T  D R I V E  D I R E C T I O N
DESCRIPTION :   Sets direction for update and scrolling forwards or backwards
ARGUMENTS   :   direction  - required direction
RETURN      :   None
NOTES       : 
---------------------------------------------------------------------------*/
        void setDriveDirection( ScrollDirection direction );

/*---------------------------------------------------------------------------
FUNCTION    :   S E T U P 
DESCRIPTION :   service that will setup the grid prior to a paint

ARGUMENTS   :   name :
                        - newTimestamp
                            

                        - newTimeBase
                        the number of ticks that represent a plot point on
                        the trendgraph. 
                                                                          
RETURN      :   None
NOTES       : 
---------------------------------------------------------------------------*/
        void setup( uint32 newTimestamp, uint32 newTimeBase );

#if defined PRINTING_SUPPORT
/*---------------------------------------------------------------------------
FUNCTION    :   S E T U P   F O R   P R I N T   
DESCRIPTION :   This service iis to be called prior to printing. It allows
                the grid to prepare its markers ready for the print
                commands

ARGUMENTS   :   name : 
                                                                          
RETURN      :   None
NOTES       : 
---------------------------------------------------------------------------*/
        void setupForPrint();
#endif

/*---------------------------------------------------------------------------
FUNCTION    :   UPDATE
DESCRIPTION :   When this service is called it will calculate what needs to
                be painted and fill in the display again.

ARGUMENTS   :   name  :     timeStamp
                            - the reference time of this update.
                      
RETURN      :   None
NOTES       : 
---------------------------------------------------------------------------*/
        void update( uint32 timeStamp );

/*---------------------------------------------------------------------------
FUNCTION    :   U P D A T E   B U F F E R
DESCRIPTION :   When a display update is not required, use this method. It
                updates the internal data ready for a call to paint that
                will then show the grid in the right position

ARGUMENTS   :   name  :      
                      
RETURN      :   None
NOTES       : 
---------------------------------------------------------------------------*/
        void updateBuffer( void );

    private:

/*---------------------------------------------------------------------------
FUNCTION    :   M A K E   G R I D   M A R K E R 
DESCRIPTION :   service that perpares a string for display. The string will
                either be a short date, or short time. this is determined
                by the current setting of the dateMarker flag

ARGUMENTS   :   name :  timestampVal
                        - the value to convert
                        
                        storePtr
                        - the place to put the string

RETURN      :   None
NOTES       : 
---------------------------------------------------------------------------*/
        void makeGridMarker( uint32 timestampVal, char *storePtr );
            
/*---------------------------------------------------------------------------
FUNCTION    :   P A I N T   G R I D   M A R K E R 
DESCRIPTION :   given a position will put the string on the display

ARGUMENTS   :   name :
                        yPos
                        - were it goes on the Y-axis

                        gridMarkerPtr
                        - what it is
                                                                          
RETURN      :   None
NOTES       : 
---------------------------------------------------------------------------*/
        void paintGridMarker( uint16 yPos, char *gridMarkerPtr );

#if defined _WINDOWS
/*---------------------------------------------------------------------------
FUNCTION    :   PAINTHORIZONTALLINES
DESCRIPTION :   responsible for painting the grids horizontal lines 
ARGUMENTS   :   pRectToDraw     pointer to rectangle that needs refreshing.
                                in viewport coords
                pDC             pointer to device context to use
                      
RETURN      : None
NOTES       :
---------------------------------------------------------------------------*/
        void paintHorizontalLines(RectCoords* pRectToDraw, CDC* pDC );
#else
/*---------------------------------------------------------------------------
FUNCTION    :   PAINTHORIZONTALLINES
DESCRIPTION :   responsible for painting the grids horizontal lines 
ARGUMENTS   : name: xStart
                    - the starting X co-ordinate for the horizontal line
                    xEnd
                    - the ending X co-ordinate for the horizontal line
                      
RETURN      : None
NOTES       : Remember lines are drawn from origin. The origin in a
              horizontal viewport will be the top.    
---------------------------------------------------------------------------*/
        void paintHorizontalLines( uint16 xStart, uint16 xEnd );
#endif

#if defined _WINDOWS
/*---------------------------------------------------------------------------
FUNCTION    :   PAINTVERTICALLINES
DESCRIPTION :   responsible for painting the grids vertical lines 
ARGUMENTS   :   pRectToDraw     pointer to rectangle that needs refreshing.
                                in viewport coords
                offset          offset from rhs that rightmost line would be 
                                drawn if rectangle included whole viewport
                pDC             pointer to device context to use
RETURN      : None
NOTES       : 
---------------------------------------------------------------------------*/
        void paintVerticalLines( RectCoords* pRectToDraw, uint16 offset,
            CDC* pDC );
#else
/*---------------------------------------------------------------------------
FUNCTION    :   PAINTVERTICALLINES
DESCRIPTION :   responsible for painting the grids vertical lines 
ARGUMENTS   : name  :   yStart
                        - the starting Y co-ordinate for the vertical line
                        yEnd
                        - the ending Y co-ordinate for the vertical line
                        offset
                        - a starting point offset that determines at what X
                        position the first line will be drawn

                      
RETURN      : None
NOTES       : 
---------------------------------------------------------------------------*/
        void paintVerticalLines( uint16 yStart, uint16 yEnd, uint16 offset );
#endif

#if defined _WINDOWS
/*---------------------------------------------------------------------------
FUNCTION    :   PAINTVERTICALLINE
DESCRIPTION :   paints one line at the position specified, and length
ARGUMENTS   :   name  : yStart
                        - the starting point on the y axis for the line
                        yEnd
                        - the end point on the y axis for the line
                        xPosition
                        - The horizontal offset from the start of the viewport
                pDC             pointer to device context to use
                      
RETURN      :   None
NOTES       :   There is not an equivalent horizontal method as yet. This
                is a seperate method because the service is useful to a
                derivation of this class
---------------------------------------------------------------------------*/
        void paintVerticalLine( uint16 yStart, uint16 yEnd
                              , uint16 xPosition, CDC *pDC );
#else
/*---------------------------------------------------------------------------
FUNCTION    :   PAINTVERTICALLINE
DESCRIPTION :   paints one line at the position specified, and length
ARGUMENTS   :   name  : yStart
                        - the starting point on the y axis for the line
                        yEnd
                        - the end point on the y axis for the line
                        xPosition
                        - The horizontal offset from the start of the viewport
                      
RETURN      :   None
NOTES       :   There is not an equivalent horizontal method as yet. This
                is a seperate method because the service is useful to a
                derivation of this class
---------------------------------------------------------------------------*/
        void paintVerticalLine( uint16 yStart, uint16 yEnd
                              , uint16 xPosition );
#endif

/*---------------------------------------------------------------------------
INLINE FUNCTION    :    VERTICALSPACING
NOTES              :    Description at the end of the file
---------------------------------------------------------------------------*/
        uint16 verticalSpacing( void );


        // Position in viewport that we are now writing to if going forwards
        // Note that if this is greater than viewport length then we have
        // just scrolled and value must be adjusted before use.
        sint16 forwardsOutputPosition;
        
        // Position in viewport that we are now writing to if going backwards
        // Note that if this is less than zero then we have
        // just scrolled and value must be adjusted before use.
        sint16 backwardsOutputPosition;

        // position in grid cycle of forwards output position.
        // if zero then it is time to output a grid line
        sint16 forwardsIntervalCount;

        // position in grid cycle of forwards output position.
        // if zero then it is time to output a grid line
        sint16 backwardsIntervalCount;
        
        uint32  lastUpdateTimestamp;
        uint32  timeBase;       // ticks per pixel
        uint16  currentOutputPosition;
        uint16  gridTimestampSpacing;
        uint16  intervalCount;
        uint16  horizontalTotal;
        uint16  vSpacing;
#if defined PRINTING_SUPPORT
        uint16  numberOfGridMarkersPrinted;
#endif
        bool    firstTime;       // indicates first time through
        bool    dateMarker;

        GkiLineType lineType;
        GkiColour   gridColour;

    #if defined _WINDOWS
        uint16 ticksPerSec;     // number of time ticks per second
        uint16 vSpacingMin;     // minimum pixels per division along time axis 
        CPen *pPen;             // the pen to use for drawing in windows
    #endif

};


/*****************************************************************************
                        I N L I N E   F U N C T I O N S   
*****************************************************************************/

/*---------------------------------------------------------------------------
FUNCTION    :   HORIZONTALLINES
DESCRIPTION :   supplies the number of horizontal lines in the grid
ARGUMENTS   :   name  :      
                      
RETURN      :   
NOTES       : 
---------------------------------------------------------------------------*/
inline uint16 ScrollingGrid::horizontalLines( void )
{
    return( horizontalTotal );
}
/*---------------------------------------------------------------------------
FUNCTION    :   VERTICALSPACING
DESCRIPTION :   returns the distance between adjacent vertical lines
ARGUMENTS   :   name  :      
                      
RETURN      :   None
NOTES       : 
---------------------------------------------------------------------------*/
inline uint16 ScrollingGrid::verticalSpacing( void )
{
    return( vSpacing );
}

#endif
@


1.1.2.1
log
@DEV1194:DS4    Provision of major and minor grid lines
@
text
@d1 1
a1 1
/* \$""Header: /usr/local/repository/cmnsrc/review/src/sgrid.h,v 1.1 1997/04/02 11:20:05 colinl Exp \$ */
d3 1
a3 12
 * \$""Log: sgrid.h,v \$
 * Revision 1.1  1997/04/02 11:20:05  colinl
 * Project:     DEV1175
 * DCN:
 * Tested By:   Colin Law
 * Reviewed By:
 * Reason for Change: Initial Revision of all files
 *
 * Design Change Details:
 *
 * Implications:
 *
d58 6
a63 5
ARGUMENTS   :   name  : majorColour         colour for major grid lines
                        minorColour         colour for minor grid lines
                        sgLineType          line type for minor grid lines
                        yMajorGridLines     number of major y lines on grid
                        yMinorGridLines     number of major y lines on grid
d77 2
a78 3
        ScrollingGrid( GkiColour majorColour, GkiColour minorColour, 
            GkiLineType sgLineType, 
            uint16 yMajorGridLines, uint16 yMinorGridLines,
a137 17
FUNCTION    :   DrawHorizontalGridLines

DESCRIPTION :   Draws major or minor grid lines
ARGUMENTS   :   pDC         device context
                pPen        pen to use
                numLines    total lines required
                yLow, yHigh, xLow, xHigh   rectangle to draw in
                yMax        max y value
RETURN      :   None
NOTES       :   
---------------------------------------------------------------------------*/
        void DrawHorizontalGridLines( CDC* pDC, CPen* pPen, 
            uint16 numLines,
            uint16 yLow, uint16 yHigh, uint16 xLow, uint16 xHigh, 
            uint16 yMax );

/*---------------------------------------------------------------------------
d148 6
d448 1
a448 2
        uint16  m_yMajorGridLines;
        uint16  m_yMinorGridLines;
d456 2
a457 3
        GkiLineType lineType;    // line type for minor grid lines
        GkiColour   m_majorColour;
        GkiColour   m_minorColour;
d462 1
a462 2
        CPen *pMajorPen;        // pen to use for drawing major grid lines
        CPen *pMinorPen;        // pen to use for drawing minor grid lines
d472 12
@" > diffmerge2/sgrid.h,v

	  # We have to put the RCS file in the repository by hand for
	  # this test:
	  modify_repo mkdir $CVSROOT_DIRNAME/diffmerge2
	  modify_repo cp diffmerge2/sgrid.h,v \
		         $CVSROOT_DIRNAME/diffmerge2/sgrid.h,v
	  rm -rf diffmerge2
	  dotest diffmerge2_co \
	    "$testcvs co diffmerge2" "${DOTSTAR}U $DOTSTAR"
	  cd diffmerge2
	  dotest diffmerge2_update \
	    "${testcvs} update -j Review_Phase_2_Enhancements sgrid.h" \
	    "${DOTSTAR}erging ${DOTSTAR}"
	  # This is the one that counts -- there should be no output:
	  dotest diffmerge2_diff \
	    "${testcvs} diff -r Review_V1p3 sgrid.h" ''

	  dokeep
	  cd ..
	  rm -rf diffmerge2
	  modify_repo rm -rf $CVSROOT_DIRNAME/diffmerge2
	  ;;



	release)
	  # Tests of "cvs release", particularly multiple arguments.
	  # Other CVS release tests:
	  #   info-cleanup-0 for "cvs -n release".
	  #   ignore-193 for the text of the question that cvs release asks.
	  #     Also for interactions with cvsignore.
	  #   basicc: "-d .", global -Q, no arguments (is a noop),
	  #     "cvs release" without -d, multiple arguments.
	  #   dirs-4: repository directory has been deleted.
	  #   modules2-6: multiple arguments.

	  # First the usual setup; create a directory first-dir.
	  mkdir 1; cd 1
	  dotest release-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest release-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
          cd first-dir
	  mkdir dir1
	  dotest release-3 "${testcvs} add dir1" \
"Directory ${CVSROOT_DIRNAME}/first-dir/dir1 added to the repository"
	  mkdir dir2
	  dotest release-4 "${testcvs} add dir2" \
"Directory ${CVSROOT_DIRNAME}/first-dir/dir2 added to the repository"
          cd dir2
	  mkdir dir3
	  dotest release-5 "${testcvs} add dir3" \
"Directory ${CVSROOT_DIRNAME}/first-dir/dir2/dir3 added to the repository"

          cd ../..
	  dotest release-6 "${testcvs} release -d first-dir/dir2/dir3 first-dir/dir1" \
"You have .0. altered files in this repository.
Are you sure you want to release (and delete) directory .first-dir/dir2/dir3.: \
You have .0. altered files in this repository.
Are you sure you want to release (and delete) directory .first-dir/dir1.: " <<EOF
yes
yes
EOF
	  dotest_fail release-7 "test -d first-dir/dir1" ''
	  dotest_fail release-8 "test -d first-dir/dir2/dir3" ''
	  dotest release-9 "${testcvs} update" \
"${SPROG} update: Updating \.
${SPROG} update: Updating first-dir
${SPROG} update: Updating first-dir/dir2"

          cd first-dir
	  mkdir dir1
	  dotest release-10 "${testcvs} add dir1" \
"Directory ${CVSROOT_DIRNAME}/first-dir/dir1 added to the repository"
          cd dir2
	  mkdir dir3
	  dotest release-11 "${testcvs} add dir3" \
"Directory ${CVSROOT_DIRNAME}/first-dir/dir2/dir3 added to the repository"

          cd ../..
	  dotest release-12 "${testcvs} release first-dir/dir2/dir3 first-dir/dir1" \
"You have .0. altered files in this repository.
Are you sure you want to release directory .first-dir/dir2/dir3.: .. .release. aborted by user choice.
You have .0. altered files in this repository.
Are you sure you want to release directory .first-dir/dir1.: " <<EOF
no
yes
EOF
	  dotest release-13 "${testcvs} release first-dir/dir2/dir3 first-dir/dir2" \
"You have .0. altered files in this repository.
Are you sure you want to release directory .first-dir/dir2/dir3.: \
You have .0. altered files in this repository.
Are you sure you want to release directory .first-dir/dir2.: " <<EOF
yes
yes
EOF
	  dotest release-14 "test -d first-dir/dir1" ''
	  dotest release-15 "test -d first-dir/dir2/dir3" ''

	  mkdir first-dir/dir1/dir4
	  # FIXCVS: There should be a path showing in front of dir below,
	  # I believe.
	  dotest release-unrecognized-dir-1 \
"${testcvs} release -d first-dir/dir1" \
"${QUESTION} dir4
You have .0. altered files in this repository.
Are you sure you want to release (and delete) directory \`first-dir/dir1': " <<EOF
yes
EOF

	  rm -rf first-dir/dir2

	  dotest release-16 "${testcvs} update" \
"$SPROG update: Updating \.
$SPROG update: Updating first-dir"

	  # Check to make sure release isn't overwriting a
	  # CVS/Entries file in the current directory (using data
	  # from the released directory).

	  # cvs 1.11 (remote) fails on release-21 (a message about
          # chdir into the removed directory), although it seemingly
	  # unedits and removes the directory correctly.  If
	  # you manually continue, it then fails on release-22 do
	  # to the messed up CVS/Entries file from release-21.
          cd first-dir
	  mkdir second-dir
	  dotest release-18 "$testcvs add second-dir" \
"Directory $CVSROOT_DIRNAME/first-dir/second-dir added to the repository"

	  cd second-dir
	  touch file1
	  dotest release-19 "$testcvs -Q add file1"
	  dotest release-20 '$testcvs -q ci -m add' \
"$CVSROOT_DIRNAME/first-dir/second-dir/file1,v  <--  file1
initial revision: 1\.1"
	  dotest release-21 "$testcvs edit file1"
	  cd ..
	  dotest release-22 "echo yes | $testcvs release -d second-dir" \
"You have \[0\] altered files in this repository.
Are you sure you want to release (and delete) directory \`second-dir': "
	  dotest release-23 "$testcvs -q update -d" "U second-dir/file1"
	  dotest release-24 "$testcvs edit"

	  dokeep
	  cd ../..
	  rm -r 1
	  modify_repo rm -rf 1 $CVSROOT_DIRNAME/first-dir
	  ;;



	recase)
	  #
	  # Some tests of behavior which broke at one time or another when run
	  # from case insensitive clients against case sensitive servers.
	  #
	  # These tests are namned according to the following convention:
	  #
	  #   ci	Client (sandbox filesystem) case Insensitive
	  #   cs	Client (sandbox filesystem) case Sensitive
	  #   si	Server (repository filesystem) case Insensitive
	  #   ss	Server (repository filesystem) case Sensitive
	  #

	  mkdir 1; cd 1

	  # First, we will expect different results for a few of these tests
	  # based on whether the repository is on a case sensitive filesystem
	  # or not and whether the sandbox is on a case sensitive filesystem or
	  # not, so determine which cases we are dealing with:
	  echo file >file
	  echo FiLe >FiLe
	  if cmp file FiLe >/dev/null; then
	    client_sensitive=false
	  else
	    client_sensitive=:
	  fi
	  if test -n "$remotehost"; then
	    $CVS_RSH $remotehost 'echo file >file'
	    $CVS_RSH $remotehost 'echo FiLe >FiLe'
	    if $CVS_RSH $remotehost 'cmp file FiLe >/dev/null'; then
	      server_sensitive=false
	    else
	      server_sensitive=:
	    fi
	  else
	    server_sensitive=$client_sensitive
	  fi

	  # The first test (recase-1 & recase-2) is for a remove of a file then
	  # a readd in a different case.
	  modify_repo mkdir $CVSROOT_DIRNAME/first-dir
	  dotest recase-init-1 "$testcvs -Q co first-dir"	
	  cd first-dir

	  echo this file has no content >file
	  dotest recase-init-2 "$testcvs -Q add file"
	  dotest recase-init-3 "$testcvs -Q ci -madd"
	  dotest recase-init-4 "$testcvs -Q tag first"

	  # Now remove the file.
	  dotest recase-init-5 "$testcvs -Q rm -f file"
	  dotest recase-init-6 "$testcvs -Q ci -mrm"

	  # Now the test - readd in a different case.
	  echo this file needs some content >FiLe
	  if $server_sensitive; then
	    dotest recase-1ss "$testcvs add FiLe" \
"$SPROG add: scheduling file \`FiLe' for addition
$SPROG add: use \`$SPROG commit' to add this file permanently"
	    dotest recase-2ss "$testcvs -q ci -mrecase" \
"$CVSROOT_DIRNAME/first-dir/FiLe,v  <--  FiLe
initial revision: 1\.1"
	  else # server insensitive
	    dotest recase-1si "$testcvs add FiLe" \
"$SPROG add: Re-adding file \`FiLe' after dead revision 1\.2\.
$SPROG add: use \`$SPROG commit' to add this file permanently"
	    dotest recase-2si "$testcvs -q ci -mrecase" \
"$CVSROOT_DIRNAME/first-dir/FiLe,v  <--  FiLe
new revision: 1\.3; previous revision: 1\.2"
	  fi

	  # Now verify that a checkout will still work
	  cd ../..
	  mkdir 2; cd 2
	  dotest recase-3 "$testcvs -q co first-dir" \
"U first-dir/FiLe"

	  cd first-dir
	  # Prove that we can still get status and log information on
	  # conflicting case files (1 in Attic, one in parent).
	  if $remote; then
	    if $client_sensitive; then
	      file=file
	      fIlE=fIlE
	    else # client insensitive
	      # Because FiLe is present on a case insensitive client, it is the
	      # only one ever found and queried or altered.
	      file=FiLe
	      fIlE=FiLe
	    fi
	  else # ! $remote
	    file=file
	    fIlE=fIlE
	  fi
	  if $server_sensitive; then
	    if $client_sensitive; then
	      # Client finds Entry only for FiLe.  Others returned by server.
	      dotest recase-4sscs "$testcvs status file" \
"===================================================================
File: no file file		Status: Up-to-date

   Working revision:	No entry for file
   Repository revision:	1\.2	$CVSROOT_DIRNAME/first-dir/Attic/file,v
   Commit Identifier:	${commitid}"
	      dotest recase-5sscs "$testcvs log file" \
"
RCS file: $CVSROOT_DIRNAME/first-dir/Attic/file,v
Working file: file
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	first: 1\.1
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: $username;  state: dead;  lines: +0 -0;  commitid: ${commitid};
rm
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: $username;  state: Exp;  commitid: ${commitid};
add
============================================================================="
	      dotest recase-6sscs "$testcvs status FiLe" \
"===================================================================
File: FiLe             	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	$CVSROOT_DIRNAME/first-dir/FiLe,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	      dotest recase-7sscs "$testcvs log FiLe" \
"
RCS file: $CVSROOT_DIRNAME/first-dir/FiLe,v
Working file: FiLe
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: $username;  state: Exp;  commitid: ${commitid};
recase
============================================================================="
	    else # server sensitive && client insensitive
	      # Client finds same Entry for file & FiLe.
	      dotest recase-4ssci "$testcvs status file" \
"===================================================================
File: FiLe             	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	$CVSROOT_DIRNAME/first-dir/FiLe,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	      dotest recase-5ssci "$testcvs log file" \
"
RCS file: $CVSROOT_DIRNAME/first-dir/FiLe,v
Working file: FiLe
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: $username;  state: Exp;  commitid: ${commitid};
recase
============================================================================="
	      dotest recase-6ss "$testcvs status FiLe" \
"===================================================================
File: FiLe             	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	$CVSROOT_DIRNAME/first-dir/FiLe,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	      dotest recase-7ss "$testcvs log FiLe" \
"
RCS file: $CVSROOT_DIRNAME/first-dir/FiLe,v
Working file: FiLe
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: $username;  state: Exp;  commitid: ${commitid};
recase
============================================================================="
	    fi
	  else # server insensitive
	    # There is only one archive when the server is insensitive, but the
	    # printed file/archive name can vary.
	    dotest recase-4si "$testcvs status file" \
"===================================================================
File: $file             	Status: Up-to-date

   Working revision:	1\.3.*
   Repository revision:	1\.3	$CVSROOT_DIRNAME/first-dir/$file,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	    dotest recase-5si "$testcvs log file" \
"
RCS file: $CVSROOT_DIRNAME/first-dir/$file,v
Working file: $file
head: 1\.3
branch:
locks: strict
access list:
symbolic names:
	first: 1\.1
keyword substitution: kv
total revisions: 3;	selected revisions: 3
description:
----------------------------
revision 1\.3
date: ${ISO8601DATE};  author: $username;  state: Exp;  lines: +1 -1;  commitid: ${commitid};
recase
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: $username;  state: dead;  lines: +0 -0;  commitid: ${commitid};
rm
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: $username;  state: Exp;  commitid: ${commitid};
add
============================================================================="
	    dotest recase-6si "$testcvs status FiLe" \
"===================================================================
File: FiLe             	Status: Up-to-date

   Working revision:	1\.3.*
   Repository revision:	1\.3	$CVSROOT_DIRNAME/first-dir/FiLe,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	    dotest recase-7si "$testcvs log FiLe" \
"
RCS file: $CVSROOT_DIRNAME/first-dir/FiLe,v
Working file: FiLe
head: 1\.3
branch:
locks: strict
access list:
symbolic names:
	first: 1\.1
keyword substitution: kv
total revisions: 3;	selected revisions: 3
description:
----------------------------
revision 1\.3
date: ${ISO8601DATE};  author: $username;  state: Exp;  lines: +1 -1;  commitid: ${commitid};
recase
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: $username;  state: dead;  lines: +0 -0;  commitid: ${commitid};
rm
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: $username;  state: Exp;  commitid: ${commitid};
add
============================================================================="
	  fi

	  # And when the file does not exist on the client, we go with the
	  # client Entries match.
	  if $client_sensitive && $server_sensitive; then
	    dotest recase-8sscs "$testcvs status fIlE" \
"$SPROG status: nothing known about \`fIlE'
===================================================================
File: no file fIlE		Status: Unknown

   Working revision:	No entry for fIlE
   Repository revision:	No revision control file"
	  else # !$client_sensitive || !$server_sensitive
	    dotest recase-8anyi "$testcvs status fIlE" \
"===================================================================
File: $fIlE             	Status: Up-to-date

   Working revision:	1\.[0-9]*.*
   Repository revision:	1\.[0-9]*	$CVSROOT_DIRNAME/first-dir/$fIlE,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  fi

	  # and an update
	  if $server_sensitive; then
	    dotest recase-9ss "$testcvs -q up -rfirst" \
"$SPROG update: \`FiLe' is no longer in the repository
U file"

	    if $client_sensitive; then
	      dotest recase-10sscs "$testcvs -q up -A" \
"U FiLe
$SPROG update: \`file' is no longer in the repository"
	    else # client insensitive
	      # FIXCVS: This should remove the offending file first.
	      dotest_fail recase-10ssci "$testcvs -q up -A" \
"$SPROG update: move away \`\./FiLe'; it is in the way
C FiLe
$SPROG update: \`file' is no longer in the repository"

	      cd ..
	      rm -r first-dir
	      dotest recase-11ssci "$testcvs -q co first-dir" \
"U first-dir/FiLe"
	      cd first-dir
	    fi

	    #
	    # See what happens when cased names clash.
	    #

	    # Copy the archive
	    if test -n "$remotehost"; then
	      modify_repo $CVS_RSH $remotehost \
			  "cp $CVSROOT_DIRNAME/first-dir/FiLe,v \
			  $CVSROOT_DIRNAME/first-dir/FILE,v"
	    else
	      modify_repo cp $CVSROOT_DIRNAME/first-dir/FiLe,v \
			     $CVSROOT_DIRNAME/first-dir/FILE,v
	    fi

	    if $client_sensitive; then
	      dotest recase-12sscs "$testcvs -q up" "U FILE"
	    else # client insensitive
	      dotest_fail recase-12ssci "$testcvs -q up" \
"$SPROG update: move away \`\./FILE'; it is in the way
C FILE"
	    fi
	  else # server insensitive
	    dotest recase-9si "$testcvs -q up -rfirst" "U FiLe"
	    dotest recase-10si "$testcvs -q up -A" "U FiLe"
	  fi

	  # Prove that we can still get status and log information on
	  # conflicting case files (1 in Attic, two in parent).
	  if $server_sensitive; then
	    if $client_sensitive; then
	      # Client finds Entry only for FiLe.  Others returned by server.
	      dotest recase-13sscs "$testcvs status file" \
"===================================================================
File: no file file		Status: Up-to-date

   Working revision:	No entry for file
   Repository revision:	1\.2	$CVSROOT_DIRNAME/first-dir/Attic/file,v
   Commit Identifier:	${commitid}"
	    dotest recase-14sscs "$testcvs log file" \
"
RCS file: $CVSROOT_DIRNAME/first-dir/Attic/file,v
Working file: file
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	first: 1\.1
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: $username;  state: dead;  lines: +0 -0;  commitid: ${commitid};
rm
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: $username;  state: Exp;  commitid: ${commitid};
add
============================================================================="
	    dotest recase-15sscs "$testcvs status FiLe" \
"===================================================================
File: FiLe             	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	$CVSROOT_DIRNAME/first-dir/FiLe,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	      dotest recase-16sscs "$testcvs log FiLe" \
"
RCS file: $CVSROOT_DIRNAME/first-dir/FiLe,v
Working file: FiLe
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: $username;  state: Exp;  commitid: ${commitid};
recase
============================================================================="
	      dotest recase-17sscs "$testcvs status FILE" \
"===================================================================
File: FILE             	Status: Up-to-date

   Working revision:	1.1.*
   Repository revision:	1.1	${CVSROOT_DIRNAME}/first-dir/FILE,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	      dotest recase-18sscs "$testcvs log FILE" \
"
RCS file: $CVSROOT_DIRNAME/first-dir/FILE,v
Working file: FILE
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: $username;  state: Exp;  commitid: ${commitid};
recase
============================================================================="
	    else # $server_sensitive && !$client_sensitive
	      # Client finds same Entry for file & FiLe.
	      dotest recase-13ssci "$testcvs status file" \
"===================================================================
File: FiLe             	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	$CVSROOT_DIRNAME/first-dir/FiLe,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	      dotest recase-16ssci "$testcvs log FiLe" \
"
RCS file: $CVSROOT_DIRNAME/first-dir/FiLe,v
Working file: FiLe
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: $username;  state: Exp;  commitid: ${commitid};
recase
============================================================================="
	      dotest recase-17ssci "$testcvs status FILE" \
"===================================================================
File: FiLe             	Status: Up-to-date

   Working revision:	1\.1.*
   Repository revision:	1\.1	$CVSROOT_DIRNAME/first-dir/FiLe,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	      dotest recase-18ssci "$testcvs log FILE" \
"
RCS file: $CVSROOT_DIRNAME/first-dir/FiLe,v
Working file: FiLe
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: $username;  state: Exp;  commitid: ${commitid};
recase
============================================================================="
	    fi
	  else # !$server_sensitive
	    # Skip these when the server is case insensitive - nothing
	    # has changed since recase-[4-7]si
	    :
	  fi

	  if $client_sensitive && $server_sensitive; then
	    dotest recase-19sscs "$testcvs status fIlE" \
"$SPROG status: nothing known about \`fIlE'
===================================================================
File: no file fIlE		Status: Unknown

   Working revision:	No entry for fIlE
   Repository revision:	No revision control file"
	  else # !$client_sensitive || !$server_sensitive
	    dotest recase-19anyi "$testcvs status fIlE" \
"===================================================================
File: $fIlE             	Status: Up-to-date

   Working revision:	1\.[0-9]*.*
   Repository revision:	1\.[0-9]*	$CVSROOT_DIRNAME/first-dir/$fIlE,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)"
	  fi

	  # And last but not least, prove that a checkout is still possible.
	  cd ../..
	  mkdir 3; cd 3
	  if $server_sensitive; then
	    if $client_sensitive; then
	      dotest recase-20sscs "$testcvs -q co first-dir" \
"U first-dir/FILE
U first-dir/FiLe"
	    else # $server_senstive && !$client_sensitive
	      dotest_fail recase-20ssci "$testcvs -q co first-dir" \
"U first-dir/FILE
$SPROG checkout: move away \`first-dir/FiLe'; it is in the way
C first-dir/FiLe"
	    fi
	  else # !$server_sensitive
	    # Skip these since nothing has changed.
	    :
	  fi

	  dokeep
	  cd ..
	  rm -r 1 2 3
	  if $server_sensitive && test -n "$remotehost"; then
	    # It is necessary to remove one of the case-conflicted files before
	    # recursively removing the rest under Cygwin on a Samba share or
	    # Samba returns a permission denied error due to its case
	    # confusion.
	    $CVS_RSH $remotehost "rm -f $CVSROOT_DIRNAME/first-dir/FILE,v"
	  fi
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	multiroot)
	  #
	  # set up two repositories
	  #

	  if $proxy; then
	    # don't even try
	    continue
	  fi

	  CVSROOT1_DIRNAME=${TESTDIR}/root.1
	  CVSROOT2_DIRNAME=${TESTDIR}/root.2
	  CVSROOT1=`newroot $CVSROOT1_DIRNAME`
	  CVSROOT2=`newroot $CVSROOT2_DIRNAME`
	  testcvs1="$testcvs -d '$CVSROOT1'"
	  testcvs2="$testcvs -d '$CVSROOT2'"

	  dotest multiroot-setup-1 "mkdir $CVSROOT1_DIRNAME $CVSROOT2_DIRNAME"
	  dotest multiroot-setup-2 "$testcvs1 init"
	  dotest multiroot-setup-3 "$testcvs2 init"

	  #
	  # create some directories in ${CVSROOT1_DIRNAME}
	  #
	  mkdir 1; cd 1
	  dotest multiroot-setup-4 "${testcvs1} co -l ." "${SPROG} checkout: Updating ."
	  mkdir mod1-1 mod1-2
	  dotest multiroot-setup-5 "${testcvs1} add mod1-1 mod1-2" \
"Directory ${CVSROOT1_DIRNAME}/mod1-1 added to the repository
Directory ${CVSROOT1_DIRNAME}/mod1-2 added to the repository"
	  echo file1-1 > mod1-1/file1-1
	  echo file1-2 > mod1-2/file1-2
	  dotest multiroot-setup-6 "${testcvs1} add mod1-1/file1-1 mod1-2/file1-2" \
"${SPROG} add: scheduling file .mod1-1/file1-1. for addition
${SPROG} add: scheduling file .mod1-2/file1-2. for addition
${SPROG} add: use \`${SPROG} commit' to add these files permanently"
	  dotest multiroot-setup-7 "${testcvs1} commit -m is" \
"${CPROG} commit: Examining \.
${CPROG} commit: Examining mod1-1
${CPROG} commit: Examining mod1-2
${CVSROOT1_DIRNAME}/mod1-1/file1-1,v  <--  mod1-1/file1-1
initial revision: 1.1
${CVSROOT1_DIRNAME}/mod1-2/file1-2,v  <--  mod1-2/file1-2
initial revision: 1.1"
	  cd ..
	  rm -rf 1

	  #
	  # create some directories in ${CVSROOT2_DIRNAME}
	  #
	  mkdir 1; cd 1
	  dotest multiroot-setup-8 "${testcvs2} co -l ." "${SPROG} checkout: Updating ."
	  mkdir mod2-1 mod2-2
	  dotest multiroot-setup-9 "${testcvs2} add mod2-1 mod2-2" \
"Directory ${CVSROOT2_DIRNAME}/mod2-1 added to the repository
Directory ${CVSROOT2_DIRNAME}/mod2-2 added to the repository"
	  echo file2-1 > mod2-1/file2-1
	  echo file2-2 > mod2-2/file2-2
	  dotest multiroot-setup-6 "${testcvs2} add mod2-1/file2-1 mod2-2/file2-2" \
"${SPROG} add: scheduling file .mod2-1/file2-1. for addition
${SPROG} add: scheduling file .mod2-2/file2-2. for addition
${SPROG} add: use \`${SPROG} commit' to add these files permanently"
	  dotest multiroot-setup-10 "${testcvs2} commit -m anyone" \
"${CPROG} commit: Examining \.
${CPROG} commit: Examining mod2-1
${CPROG} commit: Examining mod2-2
${CVSROOT2_DIRNAME}/mod2-1/file2-1,v  <--  mod2-1/file2-1
initial revision: 1.1
${CVSROOT2_DIRNAME}/mod2-2/file2-2,v  <--  mod2-2/file2-2
initial revision: 1.1"
	  cd ..
	  rm -rf 1

	  # check out a few directories, from simple/shallow to
	  # complex/deep
	  mkdir 1; cd 1

	  # OK, this case is kind of weird.  If we just run things from
	  # here, without CVS/Root, then CVS will contact the server
	  # mentioned in CVSROOT (which is irrelevant) which will print
	  # some messages.  Our workaround is to make sure we have a
	  # CVS/Root file at top level.  In the future, it is possible
	  # the best behavior will be to extend the existing behavior
	  # ("being called from a directory without CVS administration
	  # has always meant to process each of the sub-dirs") to also
	  # do that if there is no CVSROOT, CVS/Root, or -d at top level.
	  # 
	  # The local case could stumble through the tests without creating
	  # the top-level CVS/Root, but we create it for local and for
	  # remote to reduce special cases later in the test.
	  dotest multiroot-workaround "${testcvs1} -q co -l ." ""

	  dotest multiroot-setup-11 "${testcvs1} co mod1-1 mod1-2" \
"${SPROG} checkout: Updating mod1-1
U mod1-1/file1-1
${SPROG} checkout: Updating mod1-2
U mod1-2/file1-2"
	  dotest multiroot-setup-12 "${testcvs2} co mod2-1 mod2-2" \
"${SPROG} checkout: Updating mod2-1
U mod2-1/file2-1
${SPROG} checkout: Updating mod2-2
U mod2-2/file2-2"
	  cd mod1-2
	  dotest multiroot-setup-13 "${testcvs2} co mod2-2" \
"${SPROG} checkout: Updating mod2-2
U mod2-2/file2-2"
	  cd ..
	  cd mod2-2
	  dotest multiroot-setup-14 "${testcvs1} co mod1-2" \
"${SPROG} checkout: Updating mod1-2
U mod1-2/file1-2"
	  cd ..

	  #
	  # Make sure that the Root and Repository files contain the
	  # correct information.
	  #
	  dotest multiroot-cvsadm-1a "cat mod1-1/CVS/Root" "${CVSROOT1}"
	  dotest multiroot-cvsadm-1b "cat mod1-1/CVS/Repository" "mod1-1"
	  dotest multiroot-cvsadm-2a "cat mod2-1/CVS/Root" "${CVSROOT2}"
	  dotest multiroot-cvsadm-2b "cat mod2-1/CVS/Repository" "mod2-1"
	  dotest multiroot-cvsadm-3a "cat mod1-2/CVS/Root" "${CVSROOT1}"
	  dotest multiroot-cvsadm-3b "cat mod1-2/CVS/Repository" "mod1-2"
	  dotest multiroot-cvsadm-3c "cat mod1-2/mod2-2/CVS/Root" "${CVSROOT2}"
	  dotest multiroot-cvsadm-3d "cat mod1-2/mod2-2/CVS/Repository" "mod2-2"
	  dotest multiroot-cvsadm-4a "cat mod2-2/CVS/Root" "${CVSROOT2}"
	  dotest multiroot-cvsadm-4b "cat mod2-2/CVS/Repository" "mod2-2"
	  dotest multiroot-cvsadm-4c "cat mod2-2/mod1-2/CVS/Root" "${CVSROOT1}"
	  dotest multiroot-cvsadm-4d "cat mod2-2/mod1-2/CVS/Repository" "mod1-2"

	  #
	  # Start testing various cvs commands.  Begin with commands
	  # without extra arguments (e.g. "cvs update", "cvs diff",
	  # etc.
	  #

	  # Do at least one command with both CVSROOTs to make sure
	  # that there's not some kind of unexpected dependency on the
	  # choice of which CVSROOT is specified on the command line.

	  dotest multiroot-update-1a "${testcvs1} update" \
"${SPROG} update: Updating \.
${SPROG} update: Updating mod1-1
${SPROG} update: Updating mod1-2
${SPROG} update: Updating mod1-2/mod2-2
${SPROG} update: cannot open directory ${CVSROOT1_DIRNAME}/mod2-2: No such file or directory
${SPROG} update: skipping directory mod1-2/mod2-2
${SPROG} update: Updating mod2-1
${SPROG} update: cannot open directory ${CVSROOT1_DIRNAME}/mod2-1: No such file or directory
${SPROG} update: skipping directory mod2-1
${SPROG} update: Updating mod2-2
${SPROG} update: cannot open directory ${CVSROOT1_DIRNAME}/mod2-2: No such file or directory
${SPROG} update: skipping directory mod2-2"

	  # Same deal but with -d ${CVSROOT2}.
	  dotest multiroot-update-1b "${testcvs2} update" \
"${SPROG} update: Updating \.
${SPROG} update: Updating mod1-1
${SPROG} update: cannot open directory ${CVSROOT2_DIRNAME}/mod1-1: No such file or directory
${SPROG} update: skipping directory mod1-1
${SPROG} update: Updating mod1-2
${SPROG} update: cannot open directory ${CVSROOT2_DIRNAME}/mod1-2: No such file or directory
${SPROG} update: skipping directory mod1-2
${SPROG} update: Updating mod2-1
${SPROG} update: Updating mod2-2
${SPROG} update: Updating mod2-2/mod1-2
${SPROG} update: cannot open directory ${CVSROOT2_DIRNAME}/mod1-2: No such file or directory
${SPROG} update: skipping directory mod2-2/mod1-2"

	  # modify all files and do a diff

	  echo bobby >> mod1-1/file1-1
	  echo brown >> mod1-2/file1-2
	  echo goes >> mod2-1/file2-1
	  echo down >> mod2-2/file2-2

	  dotest_fail multiroot-diff-1 "${testcvs} diff" \
"${SPROG} diff: Diffing \.
${SPROG} diff: Diffing mod1-1
Index: mod1-1/file1-1
===================================================================
RCS file: ${CVSROOT1_DIRNAME}/mod1-1/file1-1,v
retrieving revision 1\.1
diff -r1\.1 file1-1
1a2
> bobby
${SPROG} diff: Diffing mod1-2
Index: mod1-2/file1-2
===================================================================
RCS file: ${CVSROOT1_DIRNAME}/mod1-2/file1-2,v
retrieving revision 1\.1
diff -r1\.1 file1-2
1a2
> brown
${SPROG} diff: Diffing mod2-2/mod1-2
${SPROG} diff: Diffing mod1-2/mod2-2
${SPROG} diff: Diffing mod2-1
Index: mod2-1/file2-1
===================================================================
RCS file: ${CVSROOT2_DIRNAME}/mod2-1/file2-1,v
retrieving revision 1\.1
diff -r1\.1 file2-1
1a2
> goes
${SPROG} diff: Diffing mod2-2
Index: mod2-2/file2-2
===================================================================
RCS file: ${CVSROOT2_DIRNAME}/mod2-2/file2-2,v
retrieving revision 1\.1
diff -r1\.1 file2-2
1a2
> down" \
"${SPROG} diff: Diffing \.
${SPROG} diff: Diffing mod1-1
Index: mod1-1/file1-1
===================================================================
RCS file: ${CVSROOT1_DIRNAME}/mod1-1/file1-1,v
retrieving revision 1\.1
diff -r1\.1 file1-1
1a2
> bobby
${SPROG} diff: Diffing mod1-2
Index: mod1-2/file1-2
===================================================================
RCS file: ${CVSROOT1_DIRNAME}/mod1-2/file1-2,v
retrieving revision 1\.1
diff -r1\.1 file1-2
1a2
> brown
${SPROG} diff: Diffing mod2-2
${SPROG} diff: Diffing mod2-2/mod1-2
${SPROG} diff: Diffing mod1-2
${SPROG} diff: Diffing mod1-2/mod2-2
${SPROG} diff: Diffing mod2-1
Index: mod2-1/file2-1
===================================================================
RCS file: ${CVSROOT2_DIRNAME}/mod2-1/file2-1,v
retrieving revision 1\.1
diff -r1\.1 file2-1
1a2
> goes
${SPROG} diff: Diffing mod2-2
Index: mod2-2/file2-2
===================================================================
RCS file: ${CVSROOT2_DIRNAME}/mod2-2/file2-2,v
retrieving revision 1\.1
diff -r1\.1 file2-2
1a2
> down"

	  dotest multiroot-commit-1 "${testcvs} commit -m actually" \
"${CPROG} commit: Examining \.
${CPROG} commit: Examining mod1-1
${CPROG} commit: Examining mod1-2
${CPROG} commit: Examining mod2-2/mod1-2
${CVSROOT1_DIRNAME}/mod1-1/file1-1,v  <--  mod1-1/file1-1
new revision: 1.2; previous revision: 1.1
${CVSROOT1_DIRNAME}/mod1-2/file1-2,v  <--  mod1-2/file1-2
new revision: 1.2; previous revision: 1.1
${CPROG} commit: Examining mod1-2/mod2-2
${CPROG} commit: Examining mod2-1
${CPROG} commit: Examining mod2-2
${CVSROOT2_DIRNAME}/mod2-1/file2-1,v  <--  mod2-1/file2-1
new revision: 1.2; previous revision: 1.1
${CVSROOT2_DIRNAME}/mod2-2/file2-2,v  <--  mod2-2/file2-2
new revision: 1.2; previous revision: 1.1"

	  dotest multiroot-update-2 "${testcvs} update" \
"${CPROG} update: Updating \.
${CPROG} update: Updating mod1-1
${CPROG} update: Updating mod1-2
${CPROG} update: Updating mod2-2/mod1-2
U mod2-2/mod1-2/file1-2
${CPROG} update: Updating mod1-2/mod2-2
U mod1-2/mod2-2/file2-2
${CPROG} update: Updating mod2-1
${CPROG} update: Updating mod2-2" \
"${SPROG} update: Updating \.
${SPROG} update: Updating mod1-1
${SPROG} update: Updating mod1-2
${SPROG} update: Updating mod2-2
${SPROG} update: Updating mod2-2/mod1-2
P mod2-2/mod1-2/file1-2
${SPROG} update: Updating mod1-2
${SPROG} update: Updating mod1-2/mod2-2
P mod1-2/mod2-2/file2-2
${SPROG} update: Updating mod2-1
${SPROG} update: Updating mod2-2"

	  dotest multiroot-tag-1 "${testcvs} tag cattle" \
"${SPROG} tag: Tagging \.
${SPROG} tag: Tagging mod1-1
T mod1-1/file1-1
${SPROG} tag: Tagging mod1-2
T mod1-2/file1-2
${SPROG} tag: Tagging mod2-2/mod1-2
${SPROG} tag: Tagging mod1-2/mod2-2
T mod1-2/mod2-2/file2-2
${SPROG} tag: Tagging mod2-1
T mod2-1/file2-1
${SPROG} tag: Tagging mod2-2" \
"${SPROG} tag: Tagging \.
${SPROG} tag: Tagging mod1-1
T mod1-1/file1-1
${SPROG} tag: Tagging mod1-2
T mod1-2/file1-2
${SPROG} tag: Tagging mod2-2
${SPROG} tag: Tagging mod2-2/mod1-2
${SPROG} tag: Tagging mod1-2
${SPROG} tag: Tagging mod1-2/mod2-2
T mod1-2/mod2-2/file2-2
${SPROG} tag: Tagging mod2-1
T mod2-1/file2-1
${SPROG} tag: Tagging mod2-2"

	  echo anotherfile1-1 > mod1-1/anotherfile1-1
	  echo anotherfile2-1 > mod2-1/anotherfile2-1
	  echo anotherfile1-2 > mod2-2/mod1-2/anotherfile1-2
	  echo anotherfile2-2 > mod1-2/mod2-2/anotherfile2-2

	  if $remote; then
	    cd mod1-1
	    dotest multiroot-add-1ar "${testcvs} add anotherfile1-1" \
"${SPROG} add: scheduling file .anotherfile1-1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	    cd ../mod2-1
	    dotest multiroot-add-1br "${testcvs} add anotherfile2-1" \
"${SPROG} add: scheduling file .anotherfile2-1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	    cd ../mod2-2/mod1-2
	    dotest multiroot-add-1cr "${testcvs} add anotherfile1-2" \
"${SPROG} add: scheduling file .anotherfile1-2. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	    cd ../../mod1-2/mod2-2
	    dotest multiroot-add-1dr "${testcvs} add anotherfile2-2" \
"${SPROG} add: scheduling file .anotherfile2-2. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	    cd ../..
          else
	    dotest multiroot-add-1 "${testcvs} add mod1-1/anotherfile1-1 mod2-1/anotherfile2-1 mod2-2/mod1-2/anotherfile1-2 mod1-2/mod2-2/anotherfile2-2" \
"${SPROG} add: scheduling file .mod1-1/anotherfile1-1. for addition
${SPROG} add: scheduling file .mod2-1/anotherfile2-1. for addition
${SPROG} add: scheduling file .mod2-2/mod1-2/anotherfile1-2. for addition
${SPROG} add: scheduling file .mod1-2/mod2-2/anotherfile2-2. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
          fi

	  dotest multiroot-status-1 "${testcvs} status -v" \
"${SPROG} status: Examining \.
${SPROG} status: Examining mod1-1
===================================================================
File: anotherfile1-1   	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file1-1          	Status: Up-to-date

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT1_DIRNAME}/mod1-1/file1-1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

   Existing Tags:
	cattle                   	(revision: 1\.2)

${SPROG} status: Examining mod1-2
===================================================================
File: file1-2          	Status: Up-to-date

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT1_DIRNAME}/mod1-2/file1-2,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

   Existing Tags:
	cattle                   	(revision: 1\.2)

${SPROG} status: Examining mod2-2/mod1-2
===================================================================
File: anotherfile1-2   	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file1-2          	Status: Up-to-date

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT1_DIRNAME}/mod1-2/file1-2,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

   Existing Tags:
	cattle                   	(revision: 1\.2)

${SPROG} status: Examining mod1-2/mod2-2
===================================================================
File: anotherfile2-2   	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file2-2          	Status: Up-to-date

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT2_DIRNAME}/mod2-2/file2-2,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

   Existing Tags:
	cattle                   	(revision: 1\.2)

${SPROG} status: Examining mod2-1
===================================================================
File: anotherfile2-1   	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file2-1          	Status: Up-to-date

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT2_DIRNAME}/mod2-1/file2-1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

   Existing Tags:
	cattle                   	(revision: 1\.2)

${SPROG} status: Examining mod2-2
===================================================================
File: file2-2          	Status: Up-to-date

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT2_DIRNAME}/mod2-2/file2-2,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

   Existing Tags:
	cattle                   	(revision: 1\.2)" \
"${SPROG} status: Examining \.
${SPROG} status: Examining mod1-1
===================================================================
File: anotherfile1-1   	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file1-1          	Status: Up-to-date

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT1_DIRNAME}/mod1-1/file1-1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

   Existing Tags:
	cattle                   	(revision: 1\.2)

${SPROG} status: Examining mod1-2
===================================================================
File: file1-2          	Status: Up-to-date

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT1_DIRNAME}/mod1-2/file1-2,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

   Existing Tags:
	cattle                   	(revision: 1\.2)

${SPROG} status: Examining mod2-2
${SPROG} status: Examining mod2-2/mod1-2
===================================================================
File: anotherfile1-2   	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file1-2          	Status: Up-to-date

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT1_DIRNAME}/mod1-2/file1-2,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

   Existing Tags:
	cattle                   	(revision: 1\.2)

${SPROG} status: Examining mod1-2
${SPROG} status: Examining mod1-2/mod2-2
===================================================================
File: anotherfile2-2   	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file2-2          	Status: Up-to-date

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT2_DIRNAME}/mod2-2/file2-2,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

   Existing Tags:
	cattle                   	(revision: 1\.2)

${SPROG} status: Examining mod2-1
===================================================================
File: anotherfile2-1   	Status: Locally Added

   Working revision:	New file!
   Repository revision:	No revision control file
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

===================================================================
File: file2-1          	Status: Up-to-date

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT2_DIRNAME}/mod2-1/file2-1,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

   Existing Tags:
	cattle                   	(revision: 1\.2)

${SPROG} status: Examining mod2-2
===================================================================
File: file2-2          	Status: Up-to-date

   Working revision:	1\.2.*
   Repository revision:	1\.2	${CVSROOT2_DIRNAME}/mod2-2/file2-2,v
   Commit Identifier:	${commitid}
   Sticky Tag:		(none)
   Sticky Date:		(none)
   Sticky Options:	(none)

   Existing Tags:
	cattle                   	(revision: 1\.2)"

	  dotest multiroot-commit-2 "${testcvs} commit -m reading" \
"${CPROG} commit: Examining \.
${CPROG} commit: Examining mod1-1
${CPROG} commit: Examining mod1-2
${CPROG} commit: Examining mod2-2/mod1-2
${CVSROOT1_DIRNAME}/mod1-1/anotherfile1-1,v  <--  mod1-1/anotherfile1-1
initial revision: 1\.1
${CVSROOT1_DIRNAME}/mod1-2/anotherfile1-2,v  <--  mod2-2/mod1-2/anotherfile1-2
initial revision: 1\.1
${CPROG} commit: Examining mod1-2/mod2-2
${CPROG} commit: Examining mod2-1
${CPROG} commit: Examining mod2-2
${CVSROOT2_DIRNAME}/mod2-2/anotherfile2-2,v  <--  mod1-2/mod2-2/anotherfile2-2
initial revision: 1\.1
${CVSROOT2_DIRNAME}/mod2-1/anotherfile2-1,v  <--  mod2-1/anotherfile2-1
initial revision: 1\.1"

	  dotest multiroot-update-3 "${testcvs} update" \
"${CPROG} update: Updating \.
${CPROG} update: Updating mod1-1
${CPROG} update: Updating mod1-2
U mod1-2/anotherfile1-2
${CPROG} update: Updating mod2-2/mod1-2
${CPROG} update: Updating mod1-2/mod2-2
${CPROG} update: Updating mod2-1
${CPROG} update: Updating mod2-2
U mod2-2/anotherfile2-2" \
"${SPROG} update: Updating \.
${SPROG} update: Updating mod1-1
${SPROG} update: Updating mod1-2
U mod1-2/anotherfile1-2
${SPROG} update: Updating mod2-2
${SPROG} update: Updating mod2-2/mod1-2
${SPROG} update: Updating mod1-2
${SPROG} update: Updating mod1-2/mod2-2
${SPROG} update: Updating mod2-1
${SPROG} update: Updating mod2-2
U mod2-2/anotherfile2-2"

	  dotest multiroot-log-1 "${testcvs} log" \
"${SPROG} log: Logging \.
${SPROG} log: Logging mod1-1

RCS file: ${CVSROOT1_DIRNAME}/mod1-1/anotherfile1-1,v
Working file: mod1-1/anotherfile1-1
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
reading
=============================================================================

RCS file: ${CVSROOT1_DIRNAME}/mod1-1/file1-1,v
Working file: mod1-1/file1-1
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	cattle: 1\.2
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
actually
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
is
=============================================================================
${SPROG} log: Logging mod1-2

RCS file: ${CVSROOT1_DIRNAME}/mod1-2/anotherfile1-2,v
Working file: mod1-2/anotherfile1-2
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
reading
=============================================================================

RCS file: ${CVSROOT1_DIRNAME}/mod1-2/file1-2,v
Working file: mod1-2/file1-2
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	cattle: 1\.2
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
actually
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
is
=============================================================================
${SPROG} log: Logging mod2-2/mod1-2

RCS file: ${CVSROOT1_DIRNAME}/mod1-2/anotherfile1-2,v
Working file: mod2-2/mod1-2/anotherfile1-2
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
reading
=============================================================================

RCS file: ${CVSROOT1_DIRNAME}/mod1-2/file1-2,v
Working file: mod2-2/mod1-2/file1-2
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	cattle: 1\.2
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
actually
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
is
=============================================================================
${SPROG} log: Logging mod1-2/mod2-2

RCS file: ${CVSROOT2_DIRNAME}/mod2-2/anotherfile2-2,v
Working file: mod1-2/mod2-2/anotherfile2-2
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
reading
=============================================================================

RCS file: ${CVSROOT2_DIRNAME}/mod2-2/file2-2,v
Working file: mod1-2/mod2-2/file2-2
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	cattle: 1\.2
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
actually
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
anyone
=============================================================================
${SPROG} log: Logging mod2-1

RCS file: ${CVSROOT2_DIRNAME}/mod2-1/anotherfile2-1,v
Working file: mod2-1/anotherfile2-1
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
reading
=============================================================================

RCS file: ${CVSROOT2_DIRNAME}/mod2-1/file2-1,v
Working file: mod2-1/file2-1
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	cattle: 1\.2
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
actually
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
anyone
=============================================================================
${SPROG} log: Logging mod2-2

RCS file: ${CVSROOT2_DIRNAME}/mod2-2/anotherfile2-2,v
Working file: mod2-2/anotherfile2-2
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
reading
=============================================================================

RCS file: ${CVSROOT2_DIRNAME}/mod2-2/file2-2,v
Working file: mod2-2/file2-2
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	cattle: 1\.2
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
actually
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
anyone
=============================================================================" \
"${SPROG} log: Logging \.
${SPROG} log: Logging mod1-1

RCS file: ${CVSROOT1_DIRNAME}/mod1-1/anotherfile1-1,v
Working file: mod1-1/anotherfile1-1
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
reading
=============================================================================

RCS file: ${CVSROOT1_DIRNAME}/mod1-1/file1-1,v
Working file: mod1-1/file1-1
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	cattle: 1\.2
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
actually
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
is
=============================================================================
${SPROG} log: Logging mod1-2

RCS file: ${CVSROOT1_DIRNAME}/mod1-2/anotherfile1-2,v
Working file: mod1-2/anotherfile1-2
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
reading
=============================================================================

RCS file: ${CVSROOT1_DIRNAME}/mod1-2/file1-2,v
Working file: mod1-2/file1-2
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	cattle: 1\.2
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
actually
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
is
=============================================================================
${SPROG} log: Logging mod2-2
${SPROG} log: Logging mod2-2/mod1-2

RCS file: ${CVSROOT1_DIRNAME}/mod1-2/anotherfile1-2,v
Working file: mod2-2/mod1-2/anotherfile1-2
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
reading
=============================================================================

RCS file: ${CVSROOT1_DIRNAME}/mod1-2/file1-2,v
Working file: mod2-2/mod1-2/file1-2
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	cattle: 1\.2
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
actually
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
is
=============================================================================
${SPROG} log: Logging mod1-2
${SPROG} log: Logging mod1-2/mod2-2

RCS file: ${CVSROOT2_DIRNAME}/mod2-2/anotherfile2-2,v
Working file: mod1-2/mod2-2/anotherfile2-2
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
reading
=============================================================================

RCS file: ${CVSROOT2_DIRNAME}/mod2-2/file2-2,v
Working file: mod1-2/mod2-2/file2-2
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	cattle: 1\.2
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
actually
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
anyone
=============================================================================
${SPROG} log: Logging mod2-1

RCS file: ${CVSROOT2_DIRNAME}/mod2-1/anotherfile2-1,v
Working file: mod2-1/anotherfile2-1
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
reading
=============================================================================

RCS file: ${CVSROOT2_DIRNAME}/mod2-1/file2-1,v
Working file: mod2-1/file2-1
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	cattle: 1\.2
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
actually
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
anyone
=============================================================================
${SPROG} log: Logging mod2-2

RCS file: ${CVSROOT2_DIRNAME}/mod2-2/anotherfile2-2,v
Working file: mod2-2/anotherfile2-2
head: 1\.1
branch:
locks: strict
access list:
symbolic names:
keyword substitution: kv
total revisions: 1;	selected revisions: 1
description:
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
reading
=============================================================================

RCS file: ${CVSROOT2_DIRNAME}/mod2-2/file2-2,v
Working file: mod2-2/file2-2
head: 1\.2
branch:
locks: strict
access list:
symbolic names:
	cattle: 1\.2
keyword substitution: kv
total revisions: 2;	selected revisions: 2
description:
----------------------------
revision 1\.2
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}1 -0;  commitid: ${commitid};
actually
----------------------------
revision 1\.1
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
anyone
============================================================================="


	  # After the simple cases, let's execute some commands which
	  # refer to parts of our checked-out tree (e.g. "cvs update
	  # mod1-1 mod2-2")

	  dokeep

	  # clean up after ourselves
	  cd ..
	  rm -r 1

	  # clean up our repositories
	  rm -rf ${CVSROOT1_DIRNAME} ${CVSROOT2_DIRNAME}
	  ;;



	multiroot2)
	  # More multiroot tests.  In particular, nested directories.

	  if $proxy; then
	    # don't even try
	    continue
	  fi

	  CVSROOT1_DIRNAME=${TESTDIR}/root1
	  CVSROOT2_DIRNAME=${TESTDIR}/root2
	  CVSROOT1=`newroot $CVSROOT1_DIRNAME`
	  CVSROOT2=`newroot $CVSROOT2_DIRNAME`

	  dotest multiroot2-1 "${testcvs} -d ${CVSROOT1} init" ""
	  dotest multiroot2-2 "${testcvs} -d ${CVSROOT2} init" ""

	  mkdir imp-dir; cd imp-dir
	  echo file1 >file1
	  mkdir sdir
	  echo sfile >sdir/sfile
	  mkdir sdir/ssdir
	  echo ssfile >sdir/ssdir/ssfile
	  dotest_sort multiroot2-3 \
"${testcvs} -d ${CVSROOT1} import -m import-to-root1 dir1 vend rel" "

N dir1/file1
N dir1/sdir/sfile
N dir1/sdir/ssdir/ssfile
No conflicts created by this import
${SPROG} import: Importing ${TESTDIR}/root1/dir1/sdir
${SPROG} import: Importing ${TESTDIR}/root1/dir1/sdir/ssdir"
	  cd sdir
	  dotest_sort multiroot2-4 \
"${testcvs} -d ${CVSROOT2} import -m import-to-root2 sdir vend2 rel2" "

N sdir/sfile
N sdir/ssdir/ssfile
No conflicts created by this import
${SPROG} import: Importing ${TESTDIR}/root2/sdir/ssdir"
	  cd ../..

	  mkdir 1; cd 1
	  # Get TopLevelAdmin-like behavior.
	  dotest multiroot2-5 "${testcvs} -d ${CVSROOT1} -q co -l ."
	  dotest multiroot2-5 "${testcvs} -d ${CVSROOT1} -q co dir1" \
"U dir1/file1
U dir1/sdir/sfile
U dir1/sdir/ssdir/ssfile"
	  cd dir1
	  dotest multiroot2-6 "${testcvs} -Q release -d sdir" ""
	  dotest multiroot2-7 "${testcvs} -d ${CVSROOT2} -q co sdir" \
"U sdir/sfile
U sdir/ssdir/ssfile"
	  cd ..
	  # This has one subtle effect - it deals with Entries.Log
	  # so that the next test doesn't get trace messages for
	  # Entries.Log
	  dotest multiroot2-8 "${testcvs} update" \
"${CPROG} update: Updating \.
${CPROG} update: Updating dir1
${CPROG} update: Updating dir1/sdir
${CPROG} update: Updating dir1/sdir/ssdir" \
"${SPROG} update: Updating \.
${SPROG} update: Updating dir1
${SPROG} update: Updating dir1
${SPROG} update: Updating dir1/sdir
${SPROG} update: Updating dir1/sdir/ssdir"
	  # Two reasons we don't run this on the server: (1) the server
	  # also prints some trace messages, and (2) the server trace
	  # messages are subject to out-of-order bugs (this one is hard
	  # to work around).
	  if $remote; then :; else
	    dotest multiroot2-9a "${testcvs} -t update" \
" *-> main: Session ID is ${commitid}
 *-> main loop with CVSROOT=${TESTDIR}/root1
 *-> parse_config ($TESTDIR/root1)
 *-> do_update ((null), (null), (null), 1, 0, 0, 0, 0, 0, 3, (null), (null), (null), (null), (null), 1, (null))
 *-> Write_Template (\., ${TESTDIR}/root1)
${CPROG} update: Updating \.
 *-> Reader_Lock(${TESTDIR}/root1)
 *-> Simple_Lock_Cleanup()
 *-> Write_Template (dir1, ${TESTDIR}/root1/dir1)
${CPROG} update: Updating dir1
 *-> Reader_Lock(${TESTDIR}/root1/dir1)
 *-> Simple_Lock_Cleanup()
 *-> main loop with CVSROOT=${TESTDIR}/root2
 *-> parse_config ($TESTDIR/root2)
 *-> do_update ((null), (null), (null), 1, 0, 0, 0, 0, 0, 3, (null), (null), (null), (null), (null), 1, (null))
 *-> Write_Template (dir1/sdir, ${TESTDIR}/root2/dir1/sdir)
${CPROG} update: Updating dir1/sdir
 *-> Reader_Lock(${TESTDIR}/root2/sdir)
 *-> Simple_Lock_Cleanup()
 *-> Write_Template (dir1/sdir/ssdir, ${TESTDIR}/root2/sdir/ssdir)
${CPROG} update: Updating dir1/sdir/ssdir
 *-> Reader_Lock(${TESTDIR}/root2/sdir/ssdir)
 *-> Simple_Lock_Cleanup()
 *-> Lock_Cleanup()
 *-> Simple_Lock_Cleanup()"
	  fi

	  dotest multiroot2-9 "${testcvs} -q tag tag1" \
"T dir1/file1
T dir1/sdir/sfile
T dir1/sdir/ssdir/ssfile"
	  echo "change it" >>dir1/file1
	  echo "change him too" >>dir1/sdir/sfile
	  dotest multiroot2-10 "${testcvs} -q ci -m modify" \
"$TESTDIR/root1/dir1/file1,v  <--  dir1/file1
new revision: 1\.2; previous revision: 1\.1
$TESTDIR/root2/sdir/sfile,v  <--  dir1/sdir/sfile
new revision: 1\.2; previous revision: 1\.1"
	  dotest multiroot2-11 "${testcvs} -q tag tag2" \
"T dir1/file1
T dir1/sdir/sfile
T dir1/sdir/ssdir/ssfile"
	  dotest_fail multiroot2-12 \
"${testcvs} -q diff -u -r tag1 -r tag2" \
"Index: dir1/file1
===================================================================
RCS file: ${TESTDIR}/root1/dir1/file1,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.2
diff -u -r1\.1\.1\.1 -r1\.2
--- dir1/file1	${RFCDATE}	1\.1\.1\.1
${PLUS}${PLUS}${PLUS} dir1/file1	${RFCDATE}	1\.2
@@ -1 ${PLUS}1,2 @@
 file1
${PLUS}change it
Index: dir1/sdir/sfile
===================================================================
RCS file: ${TESTDIR}/root2/sdir/sfile,v
retrieving revision 1\.1\.1\.1
retrieving revision 1\.2
diff -u -r1\.1\.1\.1 -r1\.2
--- dir1/sdir/sfile	${RFCDATE}	1\.1\.1\.1
${PLUS}${PLUS}${PLUS} dir1/sdir/sfile	${RFCDATE}	1\.2
@@ -1 ${PLUS}1,2 @@
 sfile
${PLUS}change him too"

	  if $keep; then
	    echo Keeping ${TESTDIR} and exiting due to --keep
	    exit 0
	  fi

	  # clean up after ourselves
	  cd ..
	  rm -r imp-dir 1

	  # clean up our repositories
	  rm -rf root1 root2
	  ;;



	multiroot3)
	  # More multiroot tests.  Directories are side-by-side, not nested.
	  # Not drastically different from multiroot but it covers somewhat
	  # different stuff.

	  if $proxy; then
	    # don't even try
	    continue
	  fi

	  CVSROOT1=`newroot ${TESTDIR}/root1`
	  CVSROOT2=`newroot ${TESTDIR}/root2`

	  mkdir 1; cd 1
	  dotest multiroot3-1 "${testcvs} -d ${CVSROOT1} init" ""
	  dotest multiroot3-2 "${testcvs} -d ${CVSROOT1} -q co -l ." ""
	  mkdir dir1
	  dotest multiroot3-3 "${testcvs} add dir1" \
"Directory ${TESTDIR}/root1/dir1 added to the repository"
	  dotest multiroot3-4 "${testcvs} -d ${CVSROOT2} init" ""
	  rm -r CVS
	  dotest multiroot3-5 "${testcvs} -d ${CVSROOT2} -q co -l ." ""
	  mkdir dir2

	  # OK, the problem is that CVS/Entries doesn't look quite right,
	  # I suppose because of the "rm -r".  Then again, why *should* it
	  # look right?  CVS/Root can only point to a single location, but
	  # we expect CVS/Entries to hold entries for two repositories?  It
	  # just plain isn't part of the filespec yet.
	  #
	  # Use the quick and dirty fix.
	  echo "D/dir1////" >CVS/Entries
	  echo "D/dir2////" >>CVS/Entries

	  dotest multiroot3-7 "${testcvs} add dir2" \
"Directory ${TESTDIR}/root2/dir2 added to the repository"

	  touch dir1/file1 dir2/file2
	  if $remote; then
	    # Trying to add them both in one command doesn't work,
	    # because add.c doesn't do multiroot (it doesn't use recurse.c).
	    # Furthermore, it can't deal with the parent directory
	    # having a different root from the child, hence the cd.
	    cd dir1
	    dotest multiroot3-8 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	    cd ..
	    dotest multiroot3-8a "${testcvs} add dir2/file2" \
"${SPROG} add: scheduling file .dir2/file2. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  else
	    dotest multiroot3-8 "${testcvs} add dir1/file1 dir2/file2" \
"${SPROG} add: scheduling file .dir1/file1. for addition
${SPROG} add: scheduling file .dir2/file2. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  fi

	  dotest multiroot3-9 "${testcvs} -q ci -m add-them" \
"$TESTDIR/root2/dir2/file2,v  <--  dir2/file2
initial revision: 1\.1
$TESTDIR/root1/dir1/file1,v  <--  dir1/file1
initial revision: 1\.1"

	  # That this is an error is good - we are asking CVS to do
	  # something which doesn't make sense.
	  dotest_fail multiroot3-10 \
"${testcvs} -q -d ${CVSROOT1} diff dir1/file1 dir2/file2" \
"${SPROG} diff: failed to create lock directory for .${TESTDIR}/root1/dir2' (${TESTDIR}/root1/dir2/#cvs.lock): No such file or directory
${SPROG} diff: failed to obtain dir lock in repository .${TESTDIR}/root1/dir2'
${SPROG} \[diff aborted\]: read lock failed - giving up"

	  # This one is supposed to work.
	  dotest multiroot3-11 "${testcvs} -q diff dir1/file1 dir2/file2" ""

	  # make sure we can't access across repositories
	  # FIXCVS: we probably shouldn't even create the local directories
	  # in this case, but we do, so deal with it.
	  mkdir 1a
	  cd 1a
	  dotest_fail multiroot3-12 \
"$testcvs -d $CVSROOT1 -q co ../root2/dir2" \
"$CPROG \[checkout aborted\]: up-level in module reference (\`..') invalid: \`\.\./root2/dir2'\." \
"$SPROG \[server aborted\]: up-level in module reference (\`..') invalid: \`\.\./root2/dir2'\.
$CPROG \[checkout aborted\]: end of file from server (consult above messages if any)"
	  dotest_fail multiroot3-13 \
"$testcvs -d $CVSROOT2 -q co ../root1/dir1" \
"$CPROG \[checkout aborted\]: up-level in module reference (\`..') invalid: \`\.\./root1/dir1'\." \
"$SPROG \[server aborted\]: up-level in module reference (\`..') invalid: \`\.\./root1/dir1'\.
$CPROG \[checkout aborted\]: end of file from server (consult above messages if any)"
	  dotest_fail multiroot3-14 \
"$testcvs -d $CVSROOT1 -q co ./../root2/dir2" \
"$CPROG \[checkout aborted\]: up-level in module reference (\`..') invalid: \`\./\.\./root2/dir2'\." \
"$SPROG \[server aborted\]: up-level in module reference (\`..') invalid: \`\./\.\./root2/dir2'\.
$CPROG \[checkout aborted\]: end of file from server (consult above messages if any)"
	  dotest_fail multiroot3-15 \
"$testcvs -d $CVSROOT2 -q co ./../root1/dir1" \
"$CPROG \[checkout aborted\]: up-level in module reference (\`..') invalid: \`\./\.\./root1/dir1'\." \
"$SPROG \[server aborted\]: up-level in module reference (\`..') invalid: \`\./\.\./root1/dir1'\.
$CPROG \[checkout aborted\]: end of file from server (consult above messages if any)"
	  dotest_fail multiroot3-16 \
"$testcvs -d $CVSROOT1 -q co -p ../root2/dir2" \
"$CPROG \[checkout aborted\]: up-level in module reference (\`..') invalid: \`\.\./root2/dir2'\." \
"$SPROG \[server aborted\]: up-level in module reference (\`..') invalid: \`\.\./root2/dir2'\.
$CPROG \[checkout aborted\]: end of file from server (consult above messages if any)"
	  dotest_fail multiroot3-17 \
"$testcvs -d $CVSROOT1 -q co -p ./../root1/dir1" \
"$CPROG \[checkout aborted\]: up-level in module reference (\`..') invalid: \`\./\.\./root1/dir1'\." \
"$SPROG \[server aborted\]: up-level in module reference (\`..') invalid: \`\./\.\./root1/dir1'\.
$CPROG \[checkout aborted\]: end of file from server (consult above messages if any)"

	  cd ../..

	  if $keep; then
	    echo Keeping ${TESTDIR} and exiting due to --keep
	    exit 0
	  fi

	  rm -r 1
	  rm -rf ${TESTDIR}/root1 ${TESTDIR}/root2
	  unset CVSROOT1
	  unset CVSROOT2
	  ;;



	multiroot4)
	  # More multiroot tests, in particular we have two roots with
	  # similarly-named directories and we try to see that CVS can
	  # keep them separate.

	  if $proxy; then
	    # don't even try
	    continue
	  fi

	  CVSROOT1=`newroot ${TESTDIR}/root1`
	  CVSROOT2=`newroot ${TESTDIR}/root2`

	  mkdir 1; cd 1
	  dotest multiroot4-1 "${testcvs} -d ${CVSROOT1} init" ""
	  dotest multiroot4-2 "${testcvs} -d ${CVSROOT1} -q co -l ." ""
	  mkdir dircom
	  dotest multiroot4-3 "${testcvs} add dircom" \
"Directory ${TESTDIR}/root1/dircom added to the repository"
	  cd dircom
	  touch file1
	  dotest multiroot4-4 "${testcvs} add file1" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest multiroot4-5 "${testcvs} -q ci -m add" \
"$TESTDIR/root1/dircom/file1,v  <--  file1
initial revision: 1\.1"
	  cd ../..
	  mkdir 2; cd 2
	  dotest multiroot4-6 "${testcvs} -d ${CVSROOT2} init" ""
	  dotest multiroot4-7 "${testcvs} -d ${CVSROOT2} -q co -l ." ""
	  mkdir dircom
	  dotest multiroot4-8 "${testcvs} add dircom" \
"Directory ${TESTDIR}/root2/dircom added to the repository"
	  cd dircom
	  touch file2
	  dotest multiroot4-9 "${testcvs} add file2" \
"${SPROG} add: scheduling file .file2. for addition
${SPROG} add: use .${SPROG} commit. to add this file permanently"
	  dotest multiroot4-10 "${testcvs} -q ci -m add" \
"$TESTDIR/root2/dircom/file2,v  <--  file2
initial revision: 1\.1"

	  cd ../..
	  cd 1/dircom
	  # This may look contrived; the real world example which inspired
	  # it was that a user was changing from local to remote.  Cases
	  # like switching servers (among those mounting the same
	  # repository) and so on would also look the same.
	  mkdir sdir2
	  dotest multiroot4-11 "${testcvs} -d ${CVSROOT2} add sdir2" \
"Directory ${TESTDIR}/root2/dircom/sdir2 added to the repository"

	  dotest multiroot4-12 "${testcvs} -q update" ""
	  cd ..
	  dotest multiroot4-13 "${testcvs} -q update dircom" ""
	  cd ..

	  rm -r 1 2
	  rm -rf ${TESTDIR}/root1 ${TESTDIR}/root2
	  unset CVSROOT1
	  unset CVSROOT2
	  ;;



	rmroot)
	  # When the Entries/Root file is removed from an existing
	  # workspace, CVS should assume $CVSROOT instead
	  #
	  # Right now only checking that CVS exits normally on an
	  # update once CVS/Root is deleted
	  #
	  # There was a time when this would core dump when run in
	  # client/server mode

	  mkdir 1; cd 1
	  dotest rmroot-setup-1 "${testcvs} -q co -l ." ''
	  mkdir first-dir
	  dotest rmroot-setup-2 "${testcvs} add first-dir" \
"Directory ${CVSROOT_DIRNAME}/first-dir added to the repository"
          cd first-dir
	  touch file1 file2
	  dotest rmroot-setup-3 "${testcvs} add file1 file2" \
"${SPROG} add: scheduling file .file1. for addition
${SPROG} add: scheduling file .file2. for addition
${SPROG} add: use .${SPROG} commit. to add these files permanently"
	  dotest rmroot-setup-4 "${testcvs} -q commit -minit" \
"$CVSROOT_DIRNAME/first-dir/file1,v  <--  file1
initial revision: 1\.1
$CVSROOT_DIRNAME/first-dir/file2,v  <--  file2
initial revision: 1\.1"
	  rm CVS/Root
	  dotest rmroot-1 "${testcvs} -q update" ''

	  dokeep
	  cd ../..
	  rm -rf 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/first-dir
	  ;;



	reposmv)
	  # More tests of repositories and specifying them.
	  # Similar to crerepos but that test is probably getting big
	  # enough.

	  if $proxy; then
	    # don't even try
	    continue
	  fi

	  CVSROOT1=`newroot ${TESTDIR}/root1`
	  CVSROOT_MOVED=`newroot ${TESTDIR}/root-moved`

	  dotest reposmv-setup-1 "${testcvs} -d ${CVSROOT1} init" ""
	  mkdir imp-dir; cd imp-dir
	  echo file1 >file1
	  dotest reposmv-setup-2 \
"${testcvs} -d ${CVSROOT1} import -m add dir1 vendor release" \
"N dir1/file1

No conflicts created by this import"
	  cd ..

	  mkdir 1; cd 1
	  dotest reposmv-1 "${testcvs} -d ${CVSROOT1} -Q co dir1" ""
	  mv ${TESTDIR}/root1 ${TESTDIR}/root-moved
	  cd dir1

	  # If we didn't have a relative repository, get one now.
	  dotest reposmv-1a "cat CVS/Repository" \
"${TESTDIR}/root1/dir1" "dir1"
	  echo dir1 >CVS/Repository

	  # There were some duplicated warnings and such; only test
	  # for the part of the error message which makes sense.
	  #
	  # FIXCVS then FIXME
	  # Now the duplicated error messages only occur on some platforms,
	  # including, apparently, NetBSD 1.6.1, RedHat Linux 7.3, whatever
	  # kernel that is using, and Solaris 9.  These platforms somehow
	  # decide to call Name_Root() up to four times, via do_recursion, but
	  # I'm not sure of the rest of the details.  Other platforms,
	  # including Fedora Core 1 (Linux 2.4.22-1.2199.nptl), RH Linux 9
	  # (Linux 2.4.20-37.9.legacy), and probably AIX 3.4, Solaris 8, 
	  # BSD/OS 4.2, & IRIX 6.5 only call Name_Root() once as a result of
	  # this test.
	  #
	  # Bug: "skipping directory " without filename.
	  if $remote; then
	    dotest_fail reposmv-2r "${testcvs} update" \
"Cannot access ${TESTDIR}/root1/CVSROOT
No such file or directory"
	  else
	    dotest reposmv-2 "$testcvs update" \
"$DOTSTAR$CPROG update: in directory \.:
$CPROG update: ignoring CVS/Root because it specifies a non-existent repository $TESTDIR/root1
$CPROG update: Updating \.
$DOTSTAR$CPROG update: cannot open directory $CVSROOT_DIRNAME/dir1: No such file or directory
$CPROG update: skipping directory "
	  fi

	  # CVS/Root overrides $CVSROOT
	  if $remote; then
	    CVSROOT_save=${CVSROOT}
	    CVSROOT=:fork:${TESTDIR}/root-moved; export CVSROOT
	    dotest_fail reposmv-3r "${testcvs} update" \
"Cannot access ${TESTDIR}/root1/CVSROOT
No such file or directory"
	    CVSROOT=${CVSROOT_save}; export CVSROOT
	  else
	    CVSROOT_save=$CVSROOT
	    CVSROOT=$TESTDIR/root-moved; export CVSROOT
	    dotest reposmv-3 "$testcvs update" \
"$DOTSTAR$CPROG update: in directory \.:
$CPROG update: ignoring CVS/Root because it specifies a non-existent repository $TESTDIR/root1
$CPROG update: Updating \.$DOTSTAR"
	    CVSROOT=$CVSROOT_save; export CVSROOT
	  fi

	  if $remote; then
	    CVSROOT_save=${CVSROOT}
	    CVSROOT=:fork:${TESTDIR}/root-none; export CVSROOT
	    dotest_fail reposmv-4r "${testcvs} update" \
"Cannot access ${TESTDIR}/root1/CVSROOT
No such file or directory"
	    CVSROOT=${CVSROOT_save}; export CVSROOT
	  else
	    # CVS/Root doesn't seem to quite completely override $CVSROOT
	    # Bug?  Not necessarily a big deal if it only affects error
	    # messages.
	    CVSROOT_save=${CVSROOT}
	    CVSROOT=${TESTDIR}/root-none; export CVSROOT
	    dotest_fail reposmv-4 "${testcvs} update" \
"${CPROG} update: in directory \.:
${CPROG} update: ignoring CVS/Root because it specifies a non-existent repository ${TESTDIR}/root1
${CPROG} \[update aborted\]: ${TESTDIR}/root-none/CVSROOT: No such file or directory"
	    CVSROOT=${CVSROOT_save}; export CVSROOT
	  fi

	  # -d overrides CVS/Root
	  # 
	  # Oddly enough, with CVS 1.10 I think this didn't work for
	  # local (that is, it would appear that CVS/Root would not
	  # get used, but would produce an error if it didn't exist).
	  dotest reposmv-5 "${testcvs} -d ${CVSROOT_MOVED} update" \
"${SPROG} update: Updating \."

	  # TODO: could also test various other things, like what if the
	  # user removes CVS/Root (which is legit).  Or another set of
	  # tests would be if both repositories exist but we want to make
	  # sure that CVS is using the correct one.

	  cd ../..
	  rm -r imp-dir 1
	  rm -rf root1 root2
	  unset CVSROOT1
	  ;;



	pserver)
	  # Test basic pserver functionality.
	  if $remote; then
	    if test -n "$remotehost"; then
	      # Don't even try.  (The issue is getting servercvs & testcvs
	      # set correctly for the following tests.  Some expect one access
	      # method and some another, which in $remotehost mode, means that
	      # sometimes the executables must run on one platform and
	      # sometimes another.)
	      continue
	    fi
	    save_servercvs=$servercvs
	    servercvs=$testcvs
   	    # First set SystemAuth=no.  Not really necessary, I don't
	    # think, but somehow it seems like the clean thing for
	    # the testsuite.
	    mkdir 1; cd 1
	    dotest pserver-1 "$testcvs -Q co CVSROOT" ""
	    cd CVSROOT
	    echo "SystemAuth=no" >>config
	    dotest pserver-2 "$testcvs -q ci -m config-it" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"
	    cat >$CVSROOT_DIRNAME/CVSROOT/passwd <<EOF
testme:q6WV9d2t848B2:$username
dontroot:q6WV9d2t848B2:root
anonymous::$username
$username:
willfail:   :whocares
EOF
	    dotest_fail pserver-3 "$servercvs pserver" \
"error 0 Server configuration missing --allow-root in inetd.conf" <<EOF
BEGIN AUTH REQUEST
$CVSROOT_DIRNAME
testme
Ay::'d
END AUTH REQUEST
EOF

	    # Confirm that not sending a newline during auth cannot constitute
	    # a denial-of-service attack.  This assumes that PATH_MAX is less
	    # than 65536 bytes.  If PATH_MAX is larger than 65535 bytes, this
	    # test could hang indefinitely.
	    ${AWK} 'BEGIN { printf "0123456789abcdef" }' </dev/null >garbageseg
	    echo "BEGIN AUTH REQUEST" >garbageinput
	    i=0
	    while test $i -lt 64; do
	      cat <garbageseg >>garbageseg2
	      i=`expr $i + 1`
	    done
	    i=0
	    while test $i -lt 64; do
	      cat <garbageseg2 >>garbageinput
	      i=`expr $i + 1`
	    done
	    dotest_fail pserver-auth-no-dos \
"${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"$CPROG \\[pserver aborted\\]: error reading from net while validating pserver: Not enough space" \
"$CPROG \\[pserver aborted\\]: error reading from net while validating pserver: Cannot allocate memory" <garbageinput
	    unset i
	    rm garbageseg garbageseg2 garbageinput

	    # Sending the Root and noop before waiting for the
	    # "I LOVE YOU" is bogus, but hopefully we can get
	    # away with it.
	    dotest pserver-4 "$servercvs --allow-root=$CVSROOT_DIRNAME pserver" \
"$DOTSTAR LOVE YOU
ok" <<EOF
BEGIN AUTH REQUEST
$CVSROOT_DIRNAME
testme
Ay::'d
END AUTH REQUEST
Root $CVSROOT_DIRNAME
noop
EOF

	    dotest_fail pserver-4.2 \
"$servercvs --allow-root=$CVSROOT_DIRNAME pserver" \
"error 0: root not allowed" <<EOF
BEGIN AUTH REQUEST
$CVSROOT_DIRNAME
dontroot
Ay::'d
END AUTH REQUEST
EOF

	    dotest pserver-5 "$servercvs --allow-root=$CVSROOT_DIRNAME pserver" \
"$DOTSTAR LOVE YOU
E Protocol error: Root says \"$TESTDIR/1\" but pserver says \"$CVSROOT_DIRNAME\"
error  " <<EOF
BEGIN AUTH REQUEST
$CVSROOT_DIRNAME
testme
Ay::'d
END AUTH REQUEST
Root $TESTDIR/1
noop
EOF

	    dotest pserver-5a "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
E Protocol error: init says \"${TESTDIR}/2\" but pserver says \"${CVSROOT_DIRNAME}\"
error  " <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
testme
Ay::'d
END AUTH REQUEST
init ${TESTDIR}/2
EOF
	    dotest_fail pserver-5b "test -d ${TESTDIR}/2" ''

	    dotest pserver-5c "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
E init xxx must be an absolute pathname
error  " <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
testme
Ay::'d
END AUTH REQUEST
init xxx
EOF
	    dotest_fail pserver-5d "test -d xxx" ''

	    dotest_fail pserver-6 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"I HATE YOU" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
testme
Ay::'d^b?hd
END AUTH REQUEST
EOF

	    dotest_fail pserver-7 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"I HATE YOU" <<EOF
BEGIN VERIFICATION REQUEST
${CVSROOT_DIRNAME}
testme
Ay::'d^b?hd
END VERIFICATION REQUEST
EOF

	    dotest pserver-8 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU" <<EOF
BEGIN VERIFICATION REQUEST
${CVSROOT_DIRNAME}
testme
Ay::'d
END VERIFICATION REQUEST
EOF

# Tests pserver-9 through pserver-13 are about empty passwords

            # Test empty password (both sides) for aliased user
	    dotest pserver-9 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
anonymous
A
END AUTH REQUEST
EOF

            # Test empty password (server side only) for aliased user
	    dotest pserver-10 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
anonymous
Aanythingwouldworkhereittrulydoesnotmatter
END AUTH REQUEST
EOF

            # Test empty (both sides) password for non-aliased user
	    dotest pserver-11 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
${username}
A
END AUTH REQUEST
EOF

            # Test empty (server side only) password for non-aliased user
	    dotest pserver-12 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
${username}
Anypasswordwouldworkwhynotthisonethen
END AUTH REQUEST
EOF

            # Test failure of whitespace password
	    dotest_fail pserver-13 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} HATE YOU" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
willfail
Amquiteunabletocomeupwithinterestingpasswordsanymore
END AUTH REQUEST
EOF

	    # The following tests are for read-only access

	    # Check that readers can only read, everyone else can write

	    echo anonymous >$CVSROOT_DIRNAME/CVSROOT/readers

	    dotest pserver-14 "$servercvs --allow-root=$CVSROOT_DIRNAME pserver" \
"$DOTSTAR LOVE YOU
M Concurrent Versions System (CVS) .*
ok" <<EOF
BEGIN AUTH REQUEST
$CVSROOT_DIRNAME
anonymous
Ay::'d
END AUTH REQUEST
Root $CVSROOT_DIRNAME
version
EOF

	    dotest pserver-15 "$servercvs --allow-root=$CVSROOT_DIRNAME pserver" \
"$DOTSTAR LOVE YOU
E $CPROG \\[server aborted\\]: .init. requires write access to the repository
error  " <<EOF
BEGIN AUTH REQUEST
$CVSROOT_DIRNAME
anonymous
Ay::'d
END AUTH REQUEST
init $CVSROOT_DIRNAME
EOF

	    dotest pserver-16 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
M Concurrent Versions System (CVS) .*
ok" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
testme
Ay::'d
END AUTH REQUEST
Root ${CVSROOT_DIRNAME}
version
EOF

	    dotest pserver-17 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
ok" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
testme
Ay::'d
END AUTH REQUEST
init ${CVSROOT_DIRNAME}
EOF

	    dotest pserver-18 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
M Concurrent Versions System (CVS) .*
ok" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
${username}
Ay::'d
END AUTH REQUEST
Root ${CVSROOT_DIRNAME}
version
EOF

	    dotest pserver-19 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
ok" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
${username}
Anything
END AUTH REQUEST
init ${CVSROOT_DIRNAME}
EOF

	    # Check that writers can write, everyone else can only read
	    # even if not listed in readers

	    cat >${CVSROOT_DIRNAME}/CVSROOT/writers <<EOF
testme
EOF

	    dotest pserver-20 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
M Concurrent Versions System (CVS) .*
ok" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
anonymous
Ay::'d
END AUTH REQUEST
Root ${CVSROOT_DIRNAME}
version
EOF

	    dotest pserver-21 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
E $CPROG \\[server aborted\\]: .init. requires write access to the repository
error  " <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
anonymous
Ay::'d
END AUTH REQUEST
init ${CVSROOT_DIRNAME}
EOF

	    dotest pserver-22 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
M Concurrent Versions System (CVS) .*
ok" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
testme
Ay::'d
END AUTH REQUEST
Root ${CVSROOT_DIRNAME}
version
EOF

	    dotest pserver-23 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
ok" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
testme
Ay::'d
END AUTH REQUEST
init ${CVSROOT_DIRNAME}
EOF

	    dotest pserver-24 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
M Concurrent Versions System (CVS) .*
ok" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
${username}
Ay::'d
END AUTH REQUEST
Root ${CVSROOT_DIRNAME}
version
EOF

	    dotest pserver-25 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
E $CPROG \\[server aborted\\]: .init. requires write access to the repository
error  " <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
${username}
Anything
END AUTH REQUEST
init ${CVSROOT_DIRNAME}
EOF

	    # Should work the same without readers

	    rm ${CVSROOT_DIRNAME}/CVSROOT/readers

	    dotest pserver-26 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
M Concurrent Versions System (CVS) .*
ok" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
anonymous
Ay::'d
END AUTH REQUEST
Root ${CVSROOT_DIRNAME}
version
EOF

	    dotest pserver-27 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
E $CPROG \\[server aborted\\]: .init. requires write access to the repository
error  " <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
anonymous
Ay::'d
END AUTH REQUEST
init ${CVSROOT_DIRNAME}
EOF

	    dotest pserver-28 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
M Concurrent Versions System (CVS) .*
ok" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
testme
Ay::'d
END AUTH REQUEST
Root ${CVSROOT_DIRNAME}
version
EOF

	    dotest pserver-29 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
ok" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
testme
Ay::'d
END AUTH REQUEST
init ${CVSROOT_DIRNAME}
EOF

	    dotest pserver-30 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
M Concurrent Versions System (CVS) .*
ok" <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
${username}
Ay::'d
END AUTH REQUEST
Root ${CVSROOT_DIRNAME}
version
EOF

	    dotest pserver-31 "${servercvs} --allow-root=${CVSROOT_DIRNAME} pserver" \
"${DOTSTAR} LOVE YOU
E $CPROG \\[server aborted\\]: .init. requires write access to the repository
error  " <<EOF
BEGIN AUTH REQUEST
${CVSROOT_DIRNAME}
${username}
Anything
END AUTH REQUEST
init ${CVSROOT_DIRNAME}
EOF

	    # pserver used to try and print from the NULL pointer 
	    # in this error message in this case
	    dotest_fail pserver-bufinit "${servercvs} pserver" \
"$CPROG \[pserver aborted\]: unexpected EOF encountered during authentication" </dev/null

	    # Clean up.
	    dotest pserver-cleanup-1 "${testcvs} -q up -pr1.1 config >config" ""
	    dotest pserver-cleanup-2 "${testcvs} -q ci -m config-it" \
"$CVSROOT_DIRNAME/CVSROOT/config,v  <--  config
new revision: 1\.[0-9]*; previous revision: 1\.[0-9]*
$SPROG commit: Rebuilding administrative file database"

	    dokeep
	    cd ../..
	    rm -r 1
	    restore_adm
	    servercvs=$save_servercvs
	  fi # skip the whole thing for local
	  ;;



	server)
	  # Some tests of the server (independent of the client).
	  if $remote; then
	    save_servercvs=$servercvs
	    servercvs=$testcvs
	    dotest server-1 "${servercvs} server" \
"E Protocol error: Root request missing
error  " <<EOF
Directory bogus
mumble/bar
update
EOF

	    # Could also test for relative pathnames here (so that crerepos-6a
	    # and crerepos-6b can use :fork:).
	    dotest server-2 "${servercvs} server" "ok" <<EOF
Set OTHER=variable
Set MYENV=env-value
init ${TESTDIR}/crerepos
EOF
	    dotest server-3 "test -d ${TESTDIR}/crerepos/CVSROOT" ""

	    # Now some tests of gzip-file-contents (used by jCVS).
	    ${AWK} 'BEGIN { \
printf "%c%c%c%c%c%c.6%c%c+I-.%c%c%c%c5%c;%c%c%c%c", \
31, 139, 8, 64, 5, 7, 64, 3, 225, 2, 64, 198, 185, 5, 64, 64, 64}' \
	      </dev/null | ${TR} '\100' '\000' >gzipped.dat
	    # Note that the CVS client sends "-b 1.1.1", and this
	    # test doesn't.  But the server also defaults to that.
	    cat <<EOF >session.dat
Root ${TESTDIR}/crerepos
UseUnchanged
gzip-file-contents 3
Argument -m
Argument msg
Argumentx 
Argument dir1
Argument tag1
Argument tag2
Directory .
${TESTDIR}/crerepos
Modified file1
u=rw,g=r,o=r
z25
EOF
	    cat gzipped.dat >>session.dat
	    echo import >>session.dat
	    dotest server-4 "${servercvs} server" \
"M N dir1/file1
M 
M No conflicts created by this import
M 
ok" <session.dat
	    dotest server-5 \
"${testcvs} -q -d ${TESTDIR}/crerepos co -p dir1/file1" "test"

	    # OK, here are some notify tests.
	    dotest server-6 "${servercvs} server" \
"Notified \./
${TESTDIR}/crerepos/dir1/file1
ok" <<EOF
Root ${TESTDIR}/crerepos
Directory .
${TESTDIR}/crerepos/dir1
Notify file1
E	Fri May  7 13:21:09 1999 -0000	myhost	some-work-dir	EUC
noop
EOF
	    # Sending the second "noop" before waiting for the output
	    # from the first is bogus but hopefully we can get away
	    # with it.
	    dotest server-7 "${servercvs} server" \
"M file1	$username	Fri May  7 13:21:09 1999 -0000	myhost	some-work-dir
Notified \./
${TESTDIR}/crerepos/dir1/file1
ok
M file1	$username	Fri May  7 13:21:09 1999 -0000	myhost	some-work-dir
Notified \./
${TESTDIR}/crerepos/dir1/file1
ok" <<EOF
Root ${TESTDIR}/crerepos
Directory .
${TESTDIR}/crerepos/dir1
Notify file1
E	Fri May  7 13:21:09 1999 -0000	myhost	some-work-dir	EUC
noop
Notify file1
E	The 57th day of Discord in the YOLD 3165	myhost	some-work-dir	EUC
noop
EOF

	    # OK, now test a few error conditions.
	    # FIXCVS: should give "error" and no "Notified", like server-9
	    dotest server-8 "${servercvs} server" \
"M file1	$username	The 57th day of Discord in the YOLD 3165	myhost	some-work-dir
E $CPROG server: invalid character in editor value
Notified \./
${TESTDIR}/crerepos/dir1/file1
ok" <<EOF
Root ${TESTDIR}/crerepos
Directory .
${TESTDIR}/crerepos/dir1
Notify file1
E	Setting Orange, the 52th day of Discord in the YOLD 3165	myhost	some-work-dir	EUC
noop
EOF

	    dotest server-9 "${servercvs} server" \
"E Protocol error; misformed Notify request
error  " <<EOF
Root ${TESTDIR}/crerepos
Directory .
${TESTDIR}/crerepos/dir1
Notify file1
E	Setting Orange+57th day of Discord	myhost	some-work-dir	EUC
noop
EOF

	    # First demonstrate an interesting quirk in the protocol.
	    # The "watchers" request selects the files to operate based
	    # on files which exist in the working directory.  So if we
	    # don't send "Entry" or the like, it won't do anything.
	    # Wants to be documented in cvsclient.texi...
	    dotest server-10 "${servercvs} server" "ok" <<EOF
Root ${TESTDIR}/crerepos
Directory .
${TESTDIR}/crerepos/dir1
watchers
EOF
	    # See if "watchers" and "editors" display the right thing.
	    dotest server-11 "${servercvs} server" \
"M file1	${username}	tedit	tunedit	tcommit
ok" <<EOF
Root ${TESTDIR}/crerepos
Directory .
${TESTDIR}/crerepos/dir1
Entry /file1/1.1////
watchers
EOF
	    dotest server-12 "${servercvs} server" \
"M file1	${username}	The 57th day of Discord in the YOLD 3165	myhost	some-work-dir
ok" <<EOF
Root ${TESTDIR}/crerepos
Directory .
${TESTDIR}/crerepos/dir1
Entry /file1/1.1////
editors
EOF

	    # Now do an unedit.
	    dotest server-13 "${servercvs} server" \
"Notified \./
${TESTDIR}/crerepos/dir1/file1
ok" <<EOF
Root ${TESTDIR}/crerepos
Directory .
${TESTDIR}/crerepos/dir1
Notify file1
U	7 May 1999 15:00 -0000	myhost	some-work-dir	EUC
noop
EOF

	    # Now try "watchers" and "editors" again.
	    dotest server-14 "${servercvs} server" "ok" <<EOF
Root ${TESTDIR}/crerepos
Directory .
${TESTDIR}/crerepos/dir1
watchers
EOF
	    dotest server-15 "${servercvs} server" "ok" <<EOF
Root ${TESTDIR}/crerepos
Directory .
${TESTDIR}/crerepos/dir1
editors
EOF

	    # Test that the global `-l' option is ignored nonfatally.
	    dotest server-16 "${testcvs} server" \
"E $CPROG server: WARNING: global \`-l' option ignored\.
ok" <<EOF
Global_option -l
noop
EOF

	    # There used to be some exploits based on malformed Entry requests
	    dotest server-17 "$testcvs server" \
"E protocol error: Malformed Entry
error  " <<EOF
Root $TESTDIR/crerepos
Directory .
$TESTDIR/crerepos/dir1
Entry X/file1/1.1////
noop
EOF

	    dotest server-18 "$testcvs server" \
"E protocol error: Malformed Entry
error  " <<EOF
Root $TESTDIR/crerepos
Directory .
$TESTDIR/crerepos/dir1
Entry /CC/CC/CC
noop
EOF

	    # Check that the config file may be set from the command line.
	    # But first verify the default config produces no error messages.
	    dotest server-19 "$testcvs server" \
"ok" <<EOF
Root $TESTDIR/crerepos
Directory .
$TESTDIR/crerepos
noop
EOF
	    echo THIS-CONFIG-OPTION-IS-BAD=XXX >$TESTDIR/newconfig
	    dotest_fail server-20 "$testcvs server -c $TESTDIR/newconfig" \
"E $SPROG \[server aborted\]: Invalid path to config file specified: \`$TESTDIR/newconfig'" <<EOF
Root $TESTDIR/crerepos
Directory .
$TESTDIR/crerepos
noop
EOF
	    dotest_fail server-21 \
"$testcvs server -c /etc/cvs/this-shouldnt-exist" \
"E $SPROG \[server aborted\]: Failed to resolve path: \`/etc/cvs/this-shouldnt-exist': No such file or directory" <<EOF
Root $TESTDIR/crerepos
Directory .
$TESTDIR/crerepos
noop
EOF

	    # Now make sure that the config file can't be set via the user's
	    # .cvsrc.
	    echo server -c $TESTDIR/newconfig >$HOME/.cvsrc
	    dotest server-22 "$testcvs server" \
"ok" <<EOF
Root $TESTDIR/crerepos
Directory .
$TESTDIR/crerepos
noop
EOF

	    dokeep
	    rm -rf $TESTDIR/crerepos
	    rm gzipped.dat session.dat
	    rm $TESTDIR/newconfig $HOME/.cvsrc
	    servercvs=$save_servercvs
	  fi # skip the whole thing for local
	  ;;



	server2)
	  # More server tests, in particular testing that various
	  # possible security holes are plugged.
	  if $remote; then
	    if test -n "$remotehost"; then
	      # Don't even try.  (The issue is getting servercvs & testcvs
	      # set correctly for the following tests.  Some expect one access
	      # method and some another, which in $remotehost mode, means that
	      # sometimes the executables must run on one platform and
	      # sometimes another.)
	      continue
	    fi
	    save_servercvs=$servercvs
	    servercvs=$testcvs
	    dotest server2-1 "${servercvs} server" \
"E protocol error: directory '${CVSROOT_DIRNAME}/\.\./dir1' not within root '${CVSROOT_DIRNAME}'
error  " <<EOF
Root ${CVSROOT_DIRNAME}
Directory .
${CVSROOT_DIRNAME}/../dir1
noop
EOF

	    dotest server2-2 "${servercvs} server" \
"E protocol error: directory '${CVSROOT_DIRNAME}dir1' not within root '${CVSROOT_DIRNAME}'
error  " <<EOF
Root ${CVSROOT_DIRNAME}
Directory .
${CVSROOT_DIRNAME}dir1
noop
EOF

	    dotest 2-3 "${servercvs} server" \
"E protocol error: directory '${TESTDIR}' not within root '${CVSROOT_DIRNAME}'
error  " <<EOF
Root ${CVSROOT_DIRNAME}
Directory .
${TESTDIR}
noop
EOF

	    # OK, now a few tests for the rule that one cannot pass a
	    # filename containing a slash to Modified, Is-modified,
	    # Notify, Questionable, or Unchanged.  For completeness
	    # we'd try them all.  For lazyness/conciseness we don't.
	    dotest server2-4 "${servercvs} server" \
"E protocol error: directory 'foo/bar' not within current directory
error  " <<EOF
Root ${CVSROOT_DIRNAME}
Directory .
${CVSROOT_DIRNAME}
Unchanged foo/bar
noop
EOF
	    servercvs=$save_servercvs
	  fi
	  ;;



	client)
	  # Some tests of the client (independent of the server).
	  if $remote; then :; else
	    remoteonly client
	    continue
	  fi

	  if $proxy; then
	    # Skip these tests in proxy mode since they assume we are not
	    # writing through a proxy server.  There is no writeproxy-client
	    # test currently.  The writeproxy & writeproxy-noredirect tests
	    # test the writeproxy server.
	    notproxy client
	    continue
	  fi

	  cat >$TESTDIR/serveme <<EOF
#!$TESTSHELL
# This is admittedly a bit cheezy, in the sense that we make lots
# of assumptions about what the client is going to send us.
# We don't mention Repository, because current clients don't require it.
# Sending these at our own pace, rather than waiting for the client to
# make the requests, is bogus, but hopefully we can get away with it.
echo "Valid-requests Root Valid-responses valid-requests Directory Entry Modified Unchanged Argument Argumentx ci co update"
echo "ok"
echo "M special message"
echo "Created first-dir/"
echo "$CVSROOT_DIRNAME/first-dir/file1"
echo "/file1/1.1///"
echo "u=rw,g=rw,o=rw"
echo "4"
echo "xyz"
echo "ok"
cat >/dev/null
EOF
	  # Cygwin.  Pthffffffffft!
	  if test -n "$remotehost"; then
	    $CVS_RSH $remotehost "chmod +x $TESTDIR/serveme"
	  else
	    chmod +x $TESTDIR/serveme
	  fi
	  save_CVS_SERVER=$CVS_SERVER
	  CVS_SERVER=$TESTDIR/serveme; export CVS_SERVER
	  mkdir 1; cd 1
	  dotest_fail client-1 "$testcvs -q co first-dir" \
"$CPROG \[checkout aborted\]: This server does not support the global -q option$DOTSTAR"
	  dotest client-2 "$testcvs co first-dir" "special message"

	  cat >$TESTDIR/serveme <<EOF
#!$TESTSHELL
echo "Valid-requests Root Valid-responses valid-requests Directory Entry Modified Unchanged Argument Argumentx ci co update"
echo "ok"
echo "M merge-it"
echo "Copy-file ./"
echo "$CVSROOT_DIRNAME/first-dir/file1"
echo "$TESTDIR/bogus/.#file1.1.1"
echo "Merged ./"
echo "$CVSROOT_DIRNAME/first-dir/file1"
echo "/file1/1.2///"
echo "u=rw,g=rw,o=rw"
echo "4"
echo "abd"
echo "ok"
cat >/dev/null
EOF
	  cd first-dir
	  mkdir $TESTDIR/bogus
	  # The ${DOTSTAR} is to match a potential "broken pipe" if the
	  # client exits before the server script sends everything
	  dotest_fail client-3 "$testcvs update" \
"merge-it
$CPROG \[update aborted\]: protocol error: Copy-file tried to specify director$DOTSTAR"
	  cat >$TESTDIR/serveme <<EOF
#!$TESTSHELL
echo "Valid-requests Root Valid-responses valid-requests Directory Entry Modified Unchanged Argument Argumentx ci co update"
echo "ok"
echo "M merge-it"
echo "Copy-file ./"
echo "$CVSROOT_DIRNAME/first-dir/file1"
echo ".#file1.1.1"
echo "Merged ./"
echo "$CVSROOT_DIRNAME/first-dir/file1"
echo "/file1/1.2///"
echo "u=rw,g=rw,o=rw"
echo "4"
echo "abc"
echo "ok"
cat >/dev/null
EOF
	  dotest client-4 "$testcvs update" "merge-it"
	  dotest client-5 "cat .#file1.1.1" "xyz"
	  dotest client-6 "cat CVS/Entries" "/file1/1.2/[A-Za-z0-9 :]*//
D"
	  dotest client-7 "cat file1" "abc"

	  cat >$TESTDIR/serveme <<EOF
#!$TESTSHELL
echo "Valid-requests Root Valid-responses valid-requests Directory Entry Modified Unchanged Argument Argumentx ci co update"
echo "ok"
echo "M OK, whatever"
echo "ok"
cat >$TESTDIR/client.tmp
EOF
	  chmod u=rw,go= file1
	  # By specifying the time zone in local time, we don't
	  # know exactly how that will translate to GMT.
	  dotest client-8 "$testcvs update -D 99-10-04" "OK, whatever"
	  # String 2 below is Cygwin again - ptoooey.
	  dotest client-9 "cat $TESTDIR/client.tmp" \
"Root $CVSROOT_DIRNAME
Valid-responses [-a-zA-Z ]*
valid-requests
Argument -D
Argument [34] Oct 1999 [0-9][0-9]:00:00 -0000
Argument --
Directory \.
$CVSROOT_DIRNAME/first-dir
Entry /file1/1\.2///
Modified file1
u=rw,g=,o=
4
abc
update" \
"Root $CVSROOT_DIRNAME
Valid-responses [-a-zA-Z ]*
valid-requests
Argument -D
Argument [34] Oct 1999 [0-9][0-9]:00:00 -0000
Argument --
Directory \.
$CVSROOT_DIRNAME/first-dir
Entry /file1/1\.2///
Modified file1
u=rw,g=r,o=r
4
abc
update"

	  # The following test tests what was a potential client exploit in
	  # CVS versions 1.11.14 and CVS versions 1.12.6 and earlier.  This
	  # exploit would allow a trojan server to create arbitrary files,
	  # anywhere the user had write permissions, even outside of the
	  # user's sandbox.
	  cat >$HOME/.bashrc <<EOF
#!$TESTSHELL
# This is where login scripts would usually be
# stored.
EOF
	  cat >$TESTDIR/serveme <<EOF
#!$TESTSHELL
echo "Valid-requests Root Valid-responses valid-requests Directory Entry Modified Unchanged Argument Argumentx ci co update"
echo "ok"
echo "Rcs-diff $HOME/"
echo "$HOME/.bashrc"
echo "/.bashrc/73.50///"
echo "u=rw,g=rw,o=rw"
echo "20"
echo "a1 1"
echo "echo 'gotcha!'"
echo "ok"
cat >/dev/null
EOF
	  
	  # If I don't run the following sleep between the above cat and
	  # the following calls to dotest, sometimes the serveme file isn't
	  # completely written yet by the time CVS tries to execute it,
	  # causing the shell to intermittantly report syntax errors (usually
	  # early EOF).  There's probably a new race condition here, but this
	  # works.
	  #
	  # Incidentally, I can reproduce this behavior with Linux 2.4.20 and
	  # Bash 2.05 or Bash 2.05b.
	  sleep 1
	  dotest_fail client-10 "$testcvs update" \
"$CPROG update: Server attempted to update a file via an invalid pathname:
$CPROG \[update aborted\]: \`$HOME/.bashrc'\."

	  # A second try at a client exploit.  This one never actually
	  # failed in the past, but I thought it wouldn't hurt to add a test.
	  cat >$TESTDIR/serveme <<EOF
#!$TESTSHELL
echo "Valid-requests Root Valid-responses valid-requests Directory Entry Modified Unchanged Argument Argumentx ci co update"
echo "ok"
echo "Rcs-diff ./"
echo "$HOME/.bashrc"
echo "/.bashrc/73.50///"
echo "u=rw,g=rw,o=rw"
echo "20"
echo "a1 1"
echo "echo 'gotcha!'"
echo "ok"
cat >/dev/null
EOF
	  sleep 1
	  dotest_fail client-11 "$testcvs update" \
"$CPROG \[update aborted\]: patch original file \./\.bashrc does not exist"

	  # A third try at a client exploit.  This one did used to fail like
	  # client-10.
	  cat >$TESTDIR/serveme <<EOF
#!$TESTSHELL
echo "Valid-requests Root Valid-responses valid-requests Directory Entry Modified Unchanged Argument Argumentx ci co update"
echo "ok"
echo "Rcs-diff ../../home/"
echo "../../.bashrc"
echo "/.bashrc/73.50///"
echo "u=rw,g=rw,o=rw"
echo "20"
echo "a1 1"
echo "echo 'gotcha!'"
echo "ok"
cat >/dev/null
EOF
	  sleep 1
	  dotest_fail client-12 "$testcvs update" \
"$CPROG update: Server attempted to update a file via an invalid pathname:
$CPROG \[update aborted\]: \`\.\./\.\./home/.bashrc'\."

	  # Try the same exploit using the Created response.
	  cat >$TESTDIR/serveme <<EOF
#!$TESTSHELL
echo "Valid-requests Root Valid-responses valid-requests Directory Entry Modified Unchanged Argument Argumentx ci co update"
echo "ok"
echo "Created $HOME/"
echo "$HOME/.bashrc"
echo "/.bashrc/73.50///"
echo "u=rw,g=rw,o=rw"
echo "26"
echo "#! $TESTSHELL"
echo "echo 'gotcha!'"
echo "ok"
cat >/dev/null
EOF
	  sleep 1
	  dotest_fail client-13 "$testcvs update" \
"$CPROG update: Server attempted to update a file via an invalid pathname:
$CPROG \[update aborted\]: \`$HOME/.bashrc'\."

	  # Now try using the Update-existing response
	  cat >$TESTDIR/serveme <<EOF
#!$TESTSHELL
echo "Valid-requests Root Valid-responses valid-requests Directory Entry Modified Unchanged Argument Argumentx ci co update"
echo "ok"
echo "Update-existing ../../home/"
echo "../../home/.bashrc"
echo "/.bashrc/73.50///"
echo "u=rw,g=rw,o=rw"
echo "26"
echo "#! $TESTSHELL"
echo "echo 'gotcha!'"
echo "ok"
cat >/dev/null
EOF
	  sleep 1
	  dotest_fail client-14 "$testcvs update" \
"$CPROG update: Server attempted to update a file via an invalid pathname:
$CPROG \[update aborted\]: \`\.\./\.\./home/.bashrc'\."

	  # Try the same exploit using the Merged response.
	  cat >$TESTDIR/serveme <<EOF
#!$TESTSHELL
echo "Valid-requests Root Valid-responses valid-requests Directory Entry Modified Unchanged Argument Argumentx ci co update"
echo "ok"
echo "Merged $HOME/"
echo "$HOME/.bashrc"
echo "/.bashrc/73.50///"
echo "u=rw,g=rw,o=rw"
echo "26"
echo "#! $TESTSHELL"
echo "echo 'gotcha!'"
echo "ok"
cat >/dev/null
EOF
	  sleep 1
	  dotest_fail client-15 "$testcvs update" \
"$CPROG update: Server attempted to update a file via an invalid pathname:
$CPROG \[update aborted\]: \`$HOME/.bashrc'\."

	  # Now try using the Updated response
	  cat >$TESTDIR/serveme <<EOF
#!$TESTSHELL
echo "Valid-requests Root Valid-responses valid-requests Directory Entry Modified Unchanged Argument Argumentx ci co update"
echo "ok"
echo "Updated ../../home/"
echo "../../home/.bashrc"
echo "/.bashrc/73.50///"
echo "u=rw,g=rw,o=rw"
echo "26"
echo "#! $TESTSHELL"
echo "echo 'gotcha!'"
echo "ok"
cat >/dev/null
EOF
	  sleep 1
	  dotest_fail client-16 "$testcvs update" \
"$CPROG update: Server attempted to update a file via an invalid pathname:
$CPROG \[update aborted\]: \`\.\./\.\./home/.bashrc'\."

	  # Try the same exploit using the Copy-file response.
	  # As far as I know, Copy-file was never exploitable either.
	  cat >$TESTDIR/serveme <<EOF
#!$TESTSHELL
echo "Valid-requests Root Valid-responses valid-requests Directory Entry Modified Unchanged Argument Argumentx ci co update"
echo "ok"
echo "Created ."
echo "./innocuous"
echo "/innocuous/73.50///"
echo "u=rw,g=rw,o=rw"
echo "26"
echo "#! $TESTSHELL"
echo "echo 'gotcha!'"
echo "Copy-file ."
echo "./innocuous"
echo "$HOME/innocuous"
echo "ok"
cat >/dev/null
EOF
	  sleep 1
	  dotest_fail client-18 "$testcvs update" \
"$CPROG \[update aborted\]: protocol error: Copy-file tried to specify directory"

	  # And verify that none of the exploits was successful.
	  dotest client-19 "cat $HOME/.bashrc" \
"#!$TESTSHELL
# This is where login scripts would usually be
# stored\."

	  # Check that the client detects redirect loops.
	  cat >$TESTDIR/serveme <<EOF
#!$TESTSHELL
echo "Valid-requests Root Valid-responses valid-requests Command-prep Referrer Repository Directory Relative-directory Max-dotdot Static-directory Sticky Entry Kopt Checkin-time Modified Is-modified UseUnchanged Unchanged Notify Hostname LocalDir Questionable Argument Argumentx Global_option Gzip-stream wrapper-sendme-rcsOptions Set Gssapi-authenticate expand-modules ci co update diff log rlog acl racl list rlist global-list-quiet ls add remove update-patches gzip-file-contents status rdiff tag rtag import admin export history release watch-on watch-off watch-add watch-remove watchers editors edit init annotate rannotate noop version"
echo "ok"
echo "Redirect $CVSROOT"

# Eat up data from the client to avoid broken pipe errors.
cat >/dev/null
EOF
	  echo newstuff >file1
	  dotest_fail client-20 "$testcvs ci" \
"$CPROG commit: Examining \.
$CPROG \[commit aborted\]: \`Redirect' loop detected\.  Server misconfiguration$QUESTION"

	  dokeep
	  cd ../..
	  rm -r 1
	  rmdir $TESTDIR/bogus
	  rm $TESTDIR/serveme $HOME/.bashrc
	  CVS_SERVER=$save_CVS_SERVER; export CVS_SERVER
	  ;;



	dottedroot)
	  # Check that a CVSROOT with a "." in the name will work.

	  if $proxy; then
	    # don't even try
	    continue
	  fi

	  CVSROOT_save=${CVSROOT}
	  CVSROOT_DIRNAME_save=${CVSROOT_DIRNAME}
	  CVSROOT_DIRNAME=${TESTDIR}/cvs.root
	  CVSROOT=`newroot ${CVSROOT_DIRNAME}`

	  dotest dottedroot-init-1 "${testcvs} init" ""
	  mkdir dir1
	  mkdir dir1/dir2
	  echo version1 >dir1/dir2/file1
	  cd dir1
	  dotest dottedroot-1 "${testcvs} import -m '' module1 AUTHOR INITIAL" \
"${SPROG} import: Importing ${CVSROOT_DIRNAME}/module1/dir2
N module1/dir2/file1

No conflicts created by this import"
	  cd ..

	  # This is the test that used to cause an assertion failure
	  # in recurse.c:do_recursion().
	  dotest dottedroot-2 "${testcvs} co -rINITIAL module1" \
"${SPROG} checkout: Updating module1
${SPROG} checkout: Updating module1/dir2
U module1/dir2/file1"

	  dokeep

	  rm -rf ${CVSROOT_DIRNAME}
	  rm -r dir1 module1
	  CVSROOT_DIRNAME=${CVSROOT_DIRNAME_save}
	  CVSROOT=${CVSROOT_save}
	  ;;



	fork)
	  # Test that the server defaults to the correct executable in :fork:
	  # mode.  See the note in the TODO at the end of this file about this.
	  #
	  # This test and client should be left after all other references to
	  # CVS_SERVER are removed from this script.
	  #
	  # The client series of tests already tests that CVS_SERVER is
	  # working, but that test might be better here.
	  if $remote; then
	    if test -n "$remotehost"; then
	      # Don't even try.  If our caller specified a remotehost, our
	      # access method has been determined anyhow.
	      continue
	    fi
	    mkdir fork; cd fork
	    save_CVS_SERVER=$CVS_SERVER
	    unset CVS_SERVER
	    # So looking through $PATH for cvs won't work...
	    echo "echo junk" >cvs
	    chmod a+x cvs
	    save_PATH=$PATH; PATH=.:$PATH
	    # The second error message below is for testing clients without
	    # server support.
	    if ${testcvs_server_support}; then
		dotest fork-1 "$testcvs -d:fork:$CVSROOT_DIRNAME version" \
'Client: \(.*\)
Server: \1'
	    else
		dotest_fail fork-1-noss \
"$testcvs -d:fork:$CVSROOT_DIRNAME version" \
"Client: .*
Server: ${CPROG} version: You must set the CVS_SERVER environment variable when
${CPROG} version: using the :fork: access method\.
${CPROG} \[version aborted\]: This CVS was not compiled with server support\."
	    fi

	    CVS_SERVER=${save_CVS_SERVER}; export CVS_SERVER
	    unset save_CVS_SERVER
	    PATH=$save_PATH; unset save_PATH

	    dokeep
	    cd ..
	    rm -r fork
	  fi
	  ;;



	commit-add-missing)
	  # Make sure that a commit fails when a `cvs add'ed file has
	  # been removed from the working directory.

	  mkdir 1; cd 1
	  module=c-a-m
	  echo > unused-file
	  dotest commit-add-missing-1 \
	    "$testcvs -Q import -m. $module X Y" ''

	  file=F
	  # Check it out and tag it.
	  dotest commit-add-missing-2 "$testcvs -Q co $module" ''
	  cd $module
	  dotest commit-add-missing-3 "$testcvs -Q tag -b B" ''
	  echo v1 > $file
	  dotest commit-add-missing-4 "$testcvs -Q add $file" ''
	  rm -f $file
	  dotest_fail commit-add-missing-5 "$testcvs -Q ci -m. $file" \
"${SPROG} commit: Up-to-date check failed for .$file'
${SPROG} \[commit aborted\]: correct above errors first!"

	  dotest
	  cd ../..
	  rm -rf 1
	  modify_repo rm -rf $CVSROOT_DIRNAME/$module
	  ;;



	commit-d)
	  # Check that top-level commits work when CVS/Root
	  # is overridden by cvs -d.

	  mkdir -p 1/subdir; cd 1
	  touch file1 subdir/file2
	  dotest commit-d-1 "$testcvs -Q import -m. c-d-c X Y" ""
	  dotest commit-d-2 "$testcvs -Q co c-d-c" ""
	  cd c-d-c
	  echo change >>file1; echo another change >>subdir/file2
	  # Changing working root, then override with -d
	  echo nosuchhost:/cvs > CVS/Root
	  dotest commit-d-3 "$testcvs -q -d '$CVSROOT' commit -m." \
"$CVSROOT_DIRNAME/c-d-c/file1,v  <--  file1
new revision: 1.2; previous revision: 1.1
$CVSROOT_DIRNAME/c-d-c/subdir/file2,v  <--  subdir/file2
new revision: 1.2; previous revision: 1.1"

	  dokeep
	  cd ../..
	  rm -rf 1 cvsroot/c-d-c
	  ;;



	template)
	  # Check that the CVS/Template directory is being
	  # properly created.
	  modify_repo mkdir -p $CVSROOT_DIRNAME/first/subdir
	  modify_repo mkdir $CVSROOT_DIRNAME/second
	  mkdir template; cd template

	  # check that no CVS/Template is created for an empty rcsinfo
	  # Note: For cvs clients with no Clear-template response, the
	  # CVS/Template file will exist and be zero bytes in length.
	  dotest template-empty-1 "${testcvs} -Q co first" ''
	  dotest template-empty-2 \
"test ! -s first/CVS/Template" ''
	  dotest template-empty-3 \
"test ! -s first/subdir/CVS/Template" ''
	  rm -fr first

	  # create some template files
	  echo 'CVS: the default template' > ${TESTDIR}/template/temp.def
	  echo 'CVS: the first template' > ${TESTDIR}/template/temp.first
	  echo 'CVS: the subdir template' > ${TESTDIR}/template/temp.subdir
	  
	  dotest template-rcsinfo-1 "${testcvs} -Q co CVSROOT" ''
	  cd CVSROOT
	  echo DEFAULT ${TESTDIR}/template/temp.def >>rcsinfo
	  dotest template-rcsinfo-2 "$testcvs -Q ci -m."
	  # Make sure we get the update without a commit.
	  dotest template-rcsinfo-3 "${testcvs} -Q ci -m." ''
	  # Did the CVSROOT/CVS/Template file get the updated version?
	  if $remote; then
	    dotest template-rcsinfo-4r \
"cmp CVS/Template ${TESTDIR}/template/temp.def" ''
	  else
	    dotest template-rcsinfo-4 \
"test ! -f CVS/Template" ''
	  fi
	  echo "^first/subdir ${TESTDIR}/template/temp.subdir" >>rcsinfo
	  echo "^first ${TESTDIR}/template/temp.first" >>rcsinfo
	  dotest template-rcsinfo-4.1 "${testcvs} -Q ci -m. rcsinfo"
	  # Did the CVSROOT/CVS/Template file get the updated version?
	  if $remote; then
	    dotest template-rcsinfo-5r \
"cmp CVS/Template ${TESTDIR}/template/temp.def" ''
	  else
	    dotest template-rcsinfo-5 \
"test ! -f CVS/Template" ''
	  fi
	  cd ..

	  # Now checkout the first and second modules and see
	  # if the proper template has been provided for each
	  dotest template-first "${testcvs} co first second" \
"${SPROG} checkout: Updating first
${SPROG} checkout: Updating first/subdir
${SPROG} checkout: Updating second"

	  if $remote; then
	    # When in client/server CVS/Template must exist
	    dotest template-first-r-1 "test -f first/CVS/Template" ''
	    dotest template-first-r-2 "test -f first/subdir/CVS/Template" ''
	    dotest template-first-r-3 "test -f second/CVS/Template" ''
	    # The value of the CVS/Template should be equal to the
	    # file called out in the rcsinfo file.
	    dotest template-first-r-4 \
"cmp first/CVS/Template ${TESTDIR}/template/temp.first" ''
	    dotest template-first-r-5 \
"cmp first/subdir/CVS/Template ${TESTDIR}/template/temp.subdir" ''
	    dotest template-first-r-6 \
"cmp second/CVS/Template ${TESTDIR}/template/temp.def" ''
          else
	    # When in local mode CVS/Template must NOT exist
	    dotest_fail template-first-1 "test -f first/CVS/Template" ''
	    dotest_fail template-first-2 "test -f first/subdir/CVS/Template" ''
	    dotest_fail template-first-3 "test -f second/CVS/Template" ''
	  fi

	  # Next, create a new subdirectory and see if it gets the
	  # correct template or not
	  cd second
	  mkdir otherdir
	  dotest template-add-1 "${testcvs} add otherdir" \
"Directory ${CVSROOT_DIRNAME}/second/otherdir added to the repository"
	  if $remote; then
	    dotest template-add-2r \
"cmp otherdir/CVS/Template ${TESTDIR}/template/temp.def" ''
	  else
	    dotest_fail template-add-2 "test -f otherdir/CVS/Template" ''
	  fi
	  cd ..

	  # Update the remote template. Then see if doing an
	  # update of a checked out tree will properly update
	  # the CVS/Template files.
	  echo 'CVS: Line two' >> ${TESTDIR}/template/temp.def
	  echo 'CVS: Line two' >> ${TESTDIR}/template/temp.first
	  echo 'CVS: Line two' >> ${TESTDIR}/template/temp.subdir
	  dotest template-second "${testcvs} update first second" \
"${SPROG} update: Updating first
${SPROG} update: Updating first/subdir
${SPROG} update: Updating second
${SPROG} update: Updating second/otherdir"

	  if $remote; then
	    dotest template-second-r-1 \
"cmp first/CVS/Template ${TESTDIR}/template/temp.first" ''
	    dotest template-second-r-2 \
"cmp first/subdir/CVS/Template ${TESTDIR}/template/temp.subdir" ''
	    dotest template-second-r-3 \
"cmp second/CVS/Template ${TESTDIR}/template/temp.def" ''
	    dotest template-second-r-4 \
"cmp second/otherdir/CVS/Template ${TESTDIR}/template/temp.def" ''
          else
	    # When in local mode CVS/Template must NOT exist
	    dotest_fail template-second-1 "test -f CVS/Template" ''
	    dotest_fail template-second-2 "test -f subdir/CVS/Template" ''
	    dotest_fail template-second-3 "test -f second/CVS/Template" ''
	    dotest_fail template-second-4 \
"test -f second/otherdir/CVS/Template" ''
	  fi
	  # Update the remote template with a zero-length template
	  : > ${TESTDIR}/template/temp.def
	  dotest template-third-1 "${testcvs} update second" \
"${SPROG} update: Updating second
${SPROG} update: Updating second/otherdir"

	  if $remote; then
	    dotest_fail template-third-r-2 "test -s second/CVS/Template" ''
	    dotest_fail template-third-r-3 "test -s second/otherdir/CVS/Template" ''
          else
	    dotest_fail template-third-2 "test -f second/CVS/Template" ''
	    dotest_fail template-third-3 \
"test -f second/otherdir/CVS/Template" ''
          fi

	  # fun with remote protocols and tags
	  if $remote; then
	    cd second
	    echo hello > file1
	    dotest template-tag-r-1 "${testcvs} -Q add file1" ''
	    dotest template-tag-r-2 "${testcvs} -Q commit -madd file1"
            dotest template-tag-r-3 "${testcvs} -q tag tag" 'T file1'
	    rm ${CVSROOT_DIRNAME}/CVSROOT/val-tags
	    cd ..
	    rm -fr second
	    dotest template-tag-r-4 "${testcvs} -Q co -rtag second" ''
	  fi

	  cd CVSROOT
	  dotest template-norcsinfo-1 "${testcvs} up" \
"${SPROG} update: Updating \."
	  # Did the CVSROOT/CVS/Template file get the updated version?
	  if $remote; then
	    dotest template-norcsinfo-r-2 \
"cmp CVS/Template ${TESTDIR}/template/temp.def" ''
          else
	    dotest_fail template-norcsinfo-2 "test -f CVS/Template" ''
	  fi

	  : > rcsinfo
	  dotest template-norcsinfo-3 "${testcvs} -Q ci -m. rcsinfo"
	  # Did the CVSROOT/CVS/Template file get the updated version?
	  # The file should be gone or of zero length.
	  dotest template-norcsinfo-4 \
"test ! -s CVS/Template" ''
	  cd ..

	  dotest template-norcsinfo-5 "${testcvs} update first" \
"${SPROG} update: Updating first
${SPROG} update: Updating first/subdir"

	  # Note: For cvs clients with no Clear-template response, the
	  # CVS/Template file will exist and be zero bytes in length.
	  dotest template-norcsinfo-6 \
"test ! -s first/CVS/Template" ''
	  dotest template-norcsinfo-7 \
"test ! -s first/subdir/CVS/Template" ''

	  dokeep

	  # cleanup
          modify_repo rm -rf $CVSROOT_DIRNAME/first $CVSROOT_DIRNAME/second
	  restore_adm
	  cd ..
	  rm -rf template
	  ;;



	writeproxy)
	  # Various tests for a read-only CVS mirror set up as a write-proxy
	  # for a central server.
	  #
	  # These tests are only meaningful in client/server mode.
	  if $remote; then :; else
	    remoteonly writeproxy
	    continue
	  fi

	  if $noredirect; then
	    notnoredirect writeproxy
	    continue
	  fi

	  require_rsync
	  if test $? -eq 77; then
	    skip writeproxy "$skipreason"
	    continue
	  fi

	  PRIMARY_CVSROOT_DIRNAME_save=$PRIMARY_CVSROOT_DIRNAME
	  PRIMARY_CVSROOT_save=$PRIMARY_CVSROOT
	  PRIMARY_CVSROOT_DIRNAME=$TESTDIR/primary_cvsroot
	  PRIMARY_CVSROOT=`newroot $PRIMARY_CVSROOT_DIRNAME`
	  SECONDARY_CVSROOT_DIRNAME_save=$SECONDARY_CVSROOT_DIRNAME
	  SECONDARY_CVSROOT_save=$SECONDARY_CVSROOT
	  SECONDARY_CVSROOT_DIRNAME=$TESTDIR/writeproxy_cvsroot
	  SECONDARY_CVSROOT=`newroot $SECONDARY_CVSROOT_DIRNAME`

	  # Initialize the primary repository
	  dotest writeproxy-init-1 "$testcvs -d$PRIMARY_CVSROOT init"
	  mkdir writeproxy; cd writeproxy
	  mkdir primary; cd primary
	  dotest writeproxy-init-2 "$testcvs -Qd$PRIMARY_CVSROOT co CVSROOT"
	  cd CVSROOT
	  cat >>loginfo <<EOF
ALL (cat >/dev/null; echo %R) >$TESTDIR/referrer
ALL $RSYNC -gopr --delete $PRIMARY_CVSROOT_DIRNAME/ $SECONDARY_CVSROOT_DIRNAME
EOF
	  cat >>config <<EOF
PrimaryServer=$PRIMARY_CVSROOT
EOF
	  dotest writeproxy-init-3 \
"$testcvs -Q ci -mconfigure-writeproxy"

	  # Quickly verify that the server can resolve symlinks when
	  # determining whether it is the primary.
	  # This shouldn't actually change the repository.
	  save_CVS_SERVER=$CVS_SERVER
	  ln -s $PRIMARY_CVSROOT_DIRNAME $TESTDIR/primary_link
	  dotest writeproxy-0 "$CVS_SERVER server" \
"Valid-requests Root Valid-responses valid-requests Command-prep Referrer Repository Directory Relative-directory Max-dotdot Static-directory Sticky Checkin-prog Update-prog Entry Kopt Checkin-time Modified Is-modified UseUnchanged Unchanged Notify Hostname LocalDir Questionable Argument Argumentx Global_option Gzip-stream wrapper-sendme-rcsOptions Set ${DOTSTAR}expand-modules ci co update diff log rlog acl racl list rlist global-list-quiet ls add remove update-patches gzip-file-contents status rdiff tag rtag import admin export history release watch-on watch-off watch-add watch-remove watchers editors edit init annotate rannotate noop version
ok
ok
ok" \
<< EOF
Root $TESTDIR/primary_link
Valid-responses ok error Valid-requests Redirect Checked-in New-entry Checksum Copy-file Updated Created Update-existing Merged Patched Rcs-diff Mode Mod-time Removed Remove-entry Set-static-directory Clear-static-directory Set-sticky Clear-sticky Edit-file Template Clear-template Notified Module-expansion Wrapper-rcsOption M Mbinary E F MT
valid-requests
UseUnchanged
Command-prep commit
Global_option -q
Global_option -Q
Argument -m
Argument configure-writeproxy
Argument --
Directory .
CVSROOT
Entry /checkoutlist/1.1///
Modified checkoutlist
u=rw,g=rw,o=r
495
# The "checkoutlist" file is used to support additional version controlled
# administrative files in \$CVSROOT/CVSROOT, such as template files.
#
# The first entry on a line is a filename which will be checked out from
# the corresponding RCS file in the \$CVSROOT/CVSROOT directory.
# The remainder of the line is an error message to use if the file cannot
# be checked out.
#
# File format:
#
#	[<whitespace>]<filename>[<whitespace><error message>]<end-of-line>
#
# comment lines begin with '#'
ci
EOF
	  rm $TESTDIR/primary_link

	  # And now the secondary.
	  $RSYNC -gopr $PRIMARY_CVSROOT_DIRNAME/ $SECONDARY_CVSROOT_DIRNAME

	  # Checkout from secondary
	  #
	  # For now, move the primary root out of the way to satisfy
	  # ourselves that the data is coming from the secondary.
	  mv $PRIMARY_CVSROOT_DIRNAME $TESTDIR/save-root
	  cd ../..
	  mkdir secondary; cd secondary
	  dotest writeproxy-1 "$testcvs -qd$SECONDARY_CVSROOT co CVSROOT" \
"U CVSROOT/access
U CVSROOT/aclconfig
U CVSROOT/checkoutlist
U CVSROOT/commitinfo
U CVSROOT/config
U CVSROOT/cvswrappers
U CVSROOT/group
U CVSROOT/loginfo
U CVSROOT/modules
U CVSROOT/notify
U CVSROOT/postadmin
U CVSROOT/postproxy
U CVSROOT/posttag
U CVSROOT/postwatch
U CVSROOT/preproxy
U CVSROOT/rcsinfo
U CVSROOT/taginfo
U CVSROOT/verifymsg"

	  # Confirm data present
	  cd CVSROOT
	  dotest writeproxy-2 "grep rsync loginfo" \
"ALL $RSYNC -gopr --delete $PRIMARY_CVSROOT_DIRNAME/ $SECONDARY_CVSROOT_DIRNAME"
	  dotest writeproxy-3 "grep PrimaryServer config" \
"${DOTSTAR}
PrimaryServer=$PRIMARY_CVSROOT"

	  # Checkin to secondary
	  cd ..
	  dotest writeproxy-4 "$testcvs -Qd$SECONDARY_CVSROOT co -ldtop ."
	  cd top
	  mkdir firstdir

	  # Have to move the primary root back before we can perform write
	  # operations.
	  mv $TESTDIR/save-root $PRIMARY_CVSROOT_DIRNAME

	  dotest writeproxy-5 "$testcvs -Q add firstdir"
	  cd firstdir
	  echo now you see me >file1
	  dotest writeproxy-6 "$testcvs -Q add file1"
	  dotest writeproxy-6a "grep file1 CVS/Entries >/dev/null"
	  dotest writeproxy-7 "$testcvs -Q ci -mfirst-file file1"

	  # Verify that the server got the correct referrer.
	  #
	  # This happens even when using a :fork:ed server because CVS is
	  # hardcoded to support only :ext: servers.
	  #
	  # This test meaningfully detects that a referrer was passed in fork
	  # mode because the only time the referrer string can be altered from
	  # its original state is when the server sends a Referrer response.
	  # If the client were not parsing and resending the referrer, this
	  # string would still match $SECONDARY_CVSROOT_DIRNAME.
	  dotest writeproxy-7a "cat $TESTDIR/referrer" \
":ext:$username@$hostname$SECONDARY_CVSROOT_DIRNAME"

	  # Make sure the sync took place
	  dotest writeproxy-7b "$testcvs -Q up"

	  # Checkout from primary
	  cd ../../../primary
	  dotest writeproxy-8 "$testcvs -qd$PRIMARY_CVSROOT co firstdir" \
"U firstdir/file1"

	  # Confirm data present
	  #  - This test indirectly confirms that the commit did not take
	  #    place on the secondary.
	  cd firstdir
	  dotest writeproxy-9 "cat file1" "now you see me"

	  # Commit to primary
	  echo now you see me again >file1
	  dotest writeproxy-10 "$testcvs -Q ci -medit file1"

	  # Update from secondary
	  cd ../../secondary/top/firstdir
	  dotest writeproxy-11 "$testcvs -q up" \
"U file1"

	  # Confirm data present
	  dotest writeproxy-12 "cat file1" "now you see me again"

	  # Test a failing rsync
	  cd ../../CVSROOT
	  sed \$d <loginfo >tmp
	  mv tmp loginfo
	  echo >>loginfo \
"ALL echo >&2 'Im rsync and I encountered an error!'; cat >/dev/null; exit 1"
	  dotest writeproxy-init-13 "$testcvs -Q ci -mbreak-rsync" \
"Im rsync and I encountered an error!"
	  echo "# a comment" >>loginfo
	  dotest writeproxy-13 "$testcvs -Q ci -mtest-broken-rsync" \
"Im rsync and I encountered an error!"
	  touch loginfo
	  dotest_fail writeproxy-14 "$testcvs up" \
"$SPROG update: Updating \.
$SPROG \[update aborted\]: could not find desired version 1\.4 in $PRIMARY_CVSROOT_DIRNAME/CVSROOT/loginfo,v"

	  dokeep
	  cd ../../..
	  rm -r writeproxy $TESTDIR/referrer
	  rm -rf $PRIMARY_CVSROOT_DIRNAME $SECONDARY_CVSROOT_DIRNAME
	  PRIMARY_CVSROOT_DIRNAME=$PRIMARY_CVSROOT_DIRNAME_save
	  PRIMARY_CVSROOT=$PRIMARY_CVSROOT_save
	  SECONDARY_CVSROOT_DIRNAME=$SECONDARY_CVSROOT_DIRNAME_save
	  SECONDARY_CVSROOT=$SECONDARY_CVSROOT_save
	  ;;



	writeproxy-noredirect)
	  # Various tests for a read-only CVS mirror set up as a write-proxy
	  # for a central server.
	  #
	  # These tests are only meaningful in client/server mode.
	  #
	  # These tests are a few simple tests for a writeproxy setup with a
	  # client that can't handle the `Redirect' response.  Mostly they
	  # parallel the "writeproxy" tests but, in the style of the "server",
	  # "server2", "pserver", and related tests, they bypass the CVS client
	  # for write commands by piping data into a server on STDIN to mimic
	  # a client that cannot handle the `Redirect' response.
	  if $remote; then :; else
	    remoteonly writeproxy-noredirect
	    continue
	  fi

	  require_rsync
	  if test $? -eq 77; then
	    skip writeproxy-noredirect "$skipreason"
	    continue
	  fi

	  PRIMARY_CVSROOT_DIRNAME_save=$PRIMARY_CVSROOT_DIRNAME
	  PRIMARY_CVSROOT_save=$PRIMARY_CVSROOT
	  PRIMARY_CVSROOT_DIRNAME=$TESTDIR/primary_cvsroot
	  PRIMARY_CVSROOT=`newroot $PRIMARY_CVSROOT_DIRNAME`
	  SECONDARY_CVSROOT_DIRNAME_save=$SECONDARY_CVSROOT_DIRNAME
	  SECONDARY_CVSROOT_DIRNAME=$TESTDIR/writeproxy_cvsroot

	  # Initialize the primary repository
	  dotest writeproxy-noredirect-init-1 \
"$testcvs -d'$PRIMARY_CVSROOT' init"
	  mkdir writeproxy-noredirect; cd writeproxy-noredirect
	  mkdir primary; cd primary
	  dotest writeproxy-noredirect-init-2 \
"$testcvs -Qd'$PRIMARY_CVSROOT' co CVSROOT"
	  cd CVSROOT
	  cat >>loginfo <<EOF
ALL $RSYNC -gopr --delete $PRIMARY_CVSROOT_DIRNAME/ $SECONDARY_CVSROOT_DIRNAME
EOF
	  cat >>config <<EOF
PrimaryServer=$PRIMARY_CVSROOT
EOF
	  dotest writeproxy-noredirect-init-3 \
"$testcvs -Q ci -mconfigure-writeproxy"

	  # And now the secondary.
	  $RSYNC -gopr $PRIMARY_CVSROOT_DIRNAME/ $SECONDARY_CVSROOT_DIRNAME

	  CVS_SERVER_save=$CVS_SERVER
	  CVS_SERVER_secondary=$TESTDIR/writeproxy-secondary-wrapper
	  CVS_SERVER=$CVS_SERVER_secondary

	  # Wrap the CVS server to allow --primary-root to be set by the
	  # secondary.
	  cat <<EOF >$TESTDIR/writeproxy-secondary-wrapper
#! $TESTSHELL
CVS_SERVER=$TESTDIR/writeproxy-primary-wrapper
export CVS_SERVER

# No need to check the PID of the last client since we are testing with
# Redirect disabled.
proot_arg="--allow-root $SECONDARY_CVSROOT_DIRNAME"
exec $servercvs \$proot_arg "\$@"
EOF
	  cat <<EOF >$TESTDIR/writeproxy-primary-wrapper
#! $TESTSHELL
#CVS_SERVER_LOG=/tmp/cvsprimarylog
exec $servercvs "\$@"
EOF

	  chmod a+x $TESTDIR/writeproxy-secondary-wrapper \
	            $TESTDIR/writeproxy-primary-wrapper

	  # Checkout from secondary
	  #
	  # It may look like we are checking out from the primary here, but
	  # in fork mode, the deciding factor is the PrimaryServer translation
	  # above.
	  #
	  # When the primary and secondary hostname were different, the server
	  # the client is talking directly to is more obvious.
	  #
	  # For now, move the primary root out of the way to satisfy
	  # ourselves that the data is coming from the secondary.
	  mv $PRIMARY_CVSROOT_DIRNAME $TESTDIR/save-root
	  cd ../..
	  mkdir secondary; cd secondary
	  dotest writeproxy-noredirect-1 \
"$testcvs -qd'$PRIMARY_CVSROOT' co CVSROOT" \
"U CVSROOT/access
U CVSROOT/aclconfig
U CVSROOT/checkoutlist
U CVSROOT/commitinfo
U CVSROOT/config
U CVSROOT/cvswrappers
U CVSROOT/group
U CVSROOT/loginfo
U CVSROOT/modules
U CVSROOT/notify
U CVSROOT/postadmin
U CVSROOT/postproxy
U CVSROOT/posttag
U CVSROOT/postwatch
U CVSROOT/preproxy
U CVSROOT/rcsinfo
U CVSROOT/taginfo
U CVSROOT/verifymsg"

	  # Confirm data present
	  cd CVSROOT
	  dotest writeproxy-noredirect-2 "grep rsync loginfo" \
"ALL $RSYNC -gopr --delete $PRIMARY_CVSROOT_DIRNAME/ $SECONDARY_CVSROOT_DIRNAME"
	  dotest writeproxy-noredirect-3 "grep PrimaryServer config" \
"${DOTSTAR}
PrimaryServer=$PRIMARY_CVSROOT"

	  # Checkin to secondary
	  cd ..
	  dotest writeproxy-noredirect-4 \
"$testcvs -Qd'$PRIMARY_CVSROOT' co -ldtop ."
	  cd top
	  mkdir firstdir

	  # Have to move the primary root back before we can perform write
	  # operations.
	  mv $TESTDIR/save-root $PRIMARY_CVSROOT_DIRNAME

	  dotest writeproxy-noredirect-5 "$CVS_SERVER server" \
"Valid-requests Root Valid-responses valid-requests Command-prep Referrer Repository Directory Relative-directory Max-dotdot Static-directory Sticky Checkin-prog Update-prog Entry Kopt Checkin-time Modified Is-modified UseUnchanged Unchanged Notify Hostname LocalDir Questionable Argument Argumentx Global_option Gzip-stream wrapper-sendme-rcsOptions Set ${DOTSTAR}expand-modules ci co update diff log rlog acl racl list rlist global-list-quiet ls add remove update-patches gzip-file-contents status rdiff tag rtag import admin export history release watch-on watch-off watch-add watch-remove watchers editors edit init annotate rannotate noop version
ok
ok
ok
Clear-template firstdir/
firstdir/
ok" \
<< EOF
Root $PRIMARY_CVSROOT_DIRNAME
Valid-responses ok error Valid-requests Checked-in New-entry Checksum Copy-file Updated Created Update-existing Merged Patched Rcs-diff Mode Mod-time Removed Remove-entry Set-static-directory Clear-static-directory Set-sticky Clear-sticky Template Clear-template Notified Module-expansion Wrapper-rcsOption M Mbinary E F MT
valid-requests
UseUnchanged
Command-prep add
Global_option -q
Global_option -Q
wrapper-sendme-rcsOptions
Argument --
Directory firstdir
firstdir
Directory .

Argument firstdir
add
EOF

	  # Gotta update the workspace ourselves since we bypassed the client.
	  cp -R CVS firstdir/CVS
	  echo "firstdir" >firstdir/CVS/Repository

	  cd firstdir
	  echo now you see me >file1
	  dotest writeproxy-noredirect-6 "$CVS_SERVER server" \
"Valid-requests Root Valid-responses valid-requests Command-prep Referrer Repository Directory Relative-directory Max-dotdot Static-directory Sticky Checkin-prog Update-prog Entry Kopt Checkin-time Modified Is-modified UseUnchanged Unchanged Notify Hostname LocalDir Questionable Argument Argumentx Global_option Gzip-stream wrapper-sendme-rcsOptions Set ${DOTSTAR}expand-modules ci co update diff log rlog acl racl list rlist global-list-quiet ls add remove update-patches gzip-file-contents status rdiff tag rtag import admin export history release watch-on watch-off watch-add watch-remove watchers editors edit init annotate rannotate noop version
ok
ok
ok
Checked-in \./
firstdir/file1
/file1/0///
ok" \
<< EOF
Root $PRIMARY_CVSROOT_DIRNAME
Valid-responses ok error Valid-requests Checked-in New-entry Checksum Copy-file Updated Created Update-existing Merged Patched Rcs-diff Mode Mod-time Removed Remove-entry Set-static-directory Clear-static-directory Set-sticky Clear-sticky Template Clear-template Notified Module-expansion Wrapper-rcsOption M Mbinary E F MT
valid-requests
UseUnchanged
Command-prep add
Global_option -q
Global_option -Q
wrapper-sendme-rcsOptions
Argument --
Directory .
firstdir
Is-modified file1
Argument file1
add
EOF

	  # Have to add it to the workspace ourselves again since we are
	  # bypassing the client.
	  echo /file1/0/dummy+timestamp// >>CVS/Entries

	  dotest writeproxy-noredirect-7 "$CVS_SERVER server" \
"Valid-requests Root Valid-responses valid-requests Command-prep Referrer Repository Directory Relative-directory Max-dotdot Static-directory Sticky Checkin-prog Update-prog Entry Kopt Checkin-time Modified Is-modified UseUnchanged Unchanged Notify Hostname LocalDir Questionable Argument Argumentx Global_option Gzip-stream wrapper-sendme-rcsOptions Set ${DOTSTAR}expand-modules ci co update diff log rlog acl racl list rlist global-list-quiet ls add remove update-patches gzip-file-contents status rdiff tag rtag import admin export history release watch-on watch-off watch-add watch-remove watchers editors edit init annotate rannotate noop version
ok
ok
Mode u=rw,g=rw,o=r
Checked-in \./
firstdir/file1
/file1/1\.1///
ok" \
<< EOF
Root $PRIMARY_CVSROOT_DIRNAME
Valid-responses ok error Valid-requests Checked-in New-entry Checksum Copy-file Updated Created Update-existing Merged Patched Rcs-diff Mode Mod-time Removed Remove-entry Set-static-directory Clear-static-directory Set-sticky Clear-sticky Template Clear-template Notified Module-expansion Wrapper-rcsOption M Mbinary E F MT
valid-requests
UseUnchanged
Command-prep commit
Global_option -q
Global_option -Q
Argument -m
Argument first-file
Argument --
Directory .
firstdir
Entry /file1/0/+modified//
Modified file1
u=rw,g=rw,o=r
15
now you see me
Argument file1
ci
EOF

	  # Have to add it to the workspace ourselves again since we are
	  # bypassing the client.
	  echo D >CVS/Entries
	  echo /file1/1.1/dummy+timestamp// >>CVS/Entries

	  # Make sure the sync took place
	  dotest writeproxy-noredirect-7a "$testcvs -Q up"

	  CVS_SERVER=$servercvs
	  # Checkout from primary
	  cd ../../../primary
	  dotest writeproxy-noredirect-8 \
"$testcvs -qd'$PRIMARY_CVSROOT' co firstdir" \
"U firstdir/file1"

	  # Confirm data present
	  #  - This test indirectly confirms that the commit did not take
	  #    place on the secondary.
	  cd firstdir
	  dotest writeproxy-noredirect-9 "cat file1" "now you see me"

	  # Commit to primary
	  echo now you see me again >file1
	  dotest writeproxy-noredirect-10 "$testcvs -Q ci -medit file1"

	  CVS_SERVER=$CVS_SERVER_secondary
	  # Update from secondary
	  cd ../../secondary/top/firstdir
	  dotest writeproxy-noredirect-11 "$testcvs -q up" "U file1"

	  # Confirm data present
	  dotest writeproxy-noredirect-12 "cat file1" "now you see me again"

	  dokeep
	  cd ../../../..
	  rm -r writeproxy-noredirect
	  rm -rf $PRIMARY_CVSROOT_DIRNAME $SECONDARY_CVSROOT_DIRNAME
	  rm $TESTDIR/writeproxy-secondary-wrapper \
	     $TESTDIR/writeproxy-primary-wrapper
	  CVS_SERVER=$CVS_SERVER_save
	  PRIMARY_CVSROOT_DIRNAME=$PRIMARY_CVSROOT_DIRNAME_save
	  PRIMARY_CVSROOT=$PRIMARY_CVSROOT_save
	  SECONDARY_CVSROOT_DIRNAME=$SECONDARY_CVSROOT_DIRNAME_save
	  ;;



	writeproxy-ssh)
	  # Various tests for a read-only CVS mirror set up as a write-proxy
	  # for a central server accessed via the :ext: method.
	  #
	  # Mostly these tests are intended to set up for the final test which
	  # verifies that the server registers the referrer.
	  if $remote; then :; else
	    remoteonly writeproxy-ssh
	    continue
	  fi

	  if $noredirect; then
	    notnoredirect writeproxy-ssh
	    continue
	  fi

	  require_rsh "$CVS_RSH"
	  if test $? -eq 77; then
	    skip writeproxy-ssh "$skipreason"
	    continue
	  fi

	  require_rsync
	  if test $? -eq 77; then
	    skip writeproxy-ssh "$skipreason"
	    continue
	  fi

	  # Save old roots.
	  PRIMARY_CVSROOT_DIRNAME_save=$PRIMARY_CVSROOT_DIRNAME
	  PRIMARY_CVSROOT_save=$PRIMARY_CVSROOT
	  SECONDARY_CVSROOT_DIRNAME_save=$SECONDARY_CVSROOT_DIRNAME
	  SECONDARY_CVSROOT_save=$SECONDARY_CVSROOT

	  # Set new roots.
	  PRIMARY_CVSROOT_DIRNAME=$TESTDIR/primary_cvsroot
	  PRIMARY_CVSROOT=:ext:$host$PRIMARY_CVSROOT_DIRNAME
	  SECONDARY_CVSROOT_DIRNAME=$TESTDIR/writeproxy_cvsroot
	  SECONDARY_CVSROOT=":ext;Redirect=yes:$host$SECONDARY_CVSROOT_DIRNAME"

	  # Initialize the primary repository
	  dotest writeproxy-ssh-init-1 "$testcvs -d$PRIMARY_CVSROOT init"
	  mkdir writeproxy-ssh; cd writeproxy-ssh
	  mkdir primary; cd primary
	  dotest writeproxy-ssh-init-2 "$testcvs -Qd$PRIMARY_CVSROOT co CVSROOT"
	  cd CVSROOT
	  cat >>loginfo <<EOF
ALL $RSYNC -gopr --delete $PRIMARY_CVSROOT_DIRNAME/ $SECONDARY_CVSROOT_DIRNAME
EOF
	  cat >>loginfo <<EOF
ALL echo Referrer=%R; cat >/dev/null
EOF
	  cat >>config <<EOF
PrimaryServer=$PRIMARY_CVSROOT
EOF
	  dotest writeproxy-ssh-init-3 \
"$testcvs -Q ci -mconfigure-writeproxy-ssh" \
"Referrer=NONE"

	  # And now the secondary.
	  $RSYNC -gopr $PRIMARY_CVSROOT_DIRNAME/ $SECONDARY_CVSROOT_DIRNAME

	  # Checkout from secondary
	  #
	  # For now, move the primary root out of the way to satisfy
	  # ourselves that the data is coming from the secondary.
	  mv $PRIMARY_CVSROOT_DIRNAME $TESTDIR/save-root

	  # Checkin to secondary
	  cd ../..
	  save_CVSROOT=$CVSROOT
	  CVSROOT=$SECONDARY_CVSROOT
	  export CVSROOT
	  dotest writeproxy-ssh-1 "$testcvs -Q co -ldtop ."
	  CVSROOT=$save_CVSROOT
	  export CVSROOT
	  cd top
	  mkdir firstdir

	  # Have to move the primary root back before we can perform write
	  # operations.
	  mv $TESTDIR/save-root $PRIMARY_CVSROOT_DIRNAME

	  dotest writeproxy-ssh-2 "$testcvs -Q add firstdir" \
"Referrer=:ext:$username@$hostname$SECONDARY_CVSROOT_DIRNAME"

	  cd firstdir
	  echo now you see me >file1
	  dotest writeproxy-ssh-3 "$testcvs -Q add file1"
	  dotest writeproxy-ssh-4 "$testcvs -Q ci -mfirst-file file1" \
"Referrer=:ext:$username@$hostname$SECONDARY_CVSROOT_DIRNAME"

	  dokeep
	  cd ../../..
	  rm -r writeproxy-ssh
	  rm -rf $PRIMARY_CVSROOT_DIRNAME $SECONDARY_CVSROOT_DIRNAME
	  PRIMARY_CVSROOT_DIRNAME=$PRIMARY_CVSROOT_DIRNAME_save
	  PRIMARY_CVSROOT=$PRIMARY_CVSROOT_save
	  SECONDARY_CVSROOT_DIRNAME=$SECONDARY_CVSROOT_DIRNAME_save
	  SECONDARY_CVSROOT=$SECONDARY_CVSROOT_save
	  ;;



	writeproxy-ssh-noredirect)
	  # Various tests for a read-only CVS mirror set up as a write-proxy
	  # for a central server accessed via the :ext: method.
	  #
	  # Mostly these tests are intended to set up for the final test which
	  # verifies that the server registers the referrer.
	  if $remote; then :; else
	    remoteonly writeproxy-ssh-noredirect
	    continue
	  fi

	  require_rsh "$CVS_RSH"
	  if test $? -eq 77; then
	    skip writeproxy-ssh-noredirect "$skipreason"
	    continue
	  fi

	  require_rsync
	  if test $? -eq 77; then
	    skip writeproxy-ssh-noredirect "$skipreason"
	    continue
	  fi

	  # Save old roots.
	  PRIMARY_CVSROOT_DIRNAME_save=$PRIMARY_CVSROOT_DIRNAME
	  PRIMARY_CVSROOT_save=$PRIMARY_CVSROOT
	  SECONDARY_CVSROOT_DIRNAME_save=$SECONDARY_CVSROOT_DIRNAME
	  SECONDARY_CVSROOT_save=$SECONDARY_CVSROOT

	  # Set new roots.
	  PRIMARY_CVSROOT_DIRNAME=$TESTDIR/primary_cvsroot
	  PRIMARY_CVSROOT=:ext:$host$PRIMARY_CVSROOT_DIRNAME
	  SECONDARY_CVSROOT_DIRNAME=$TESTDIR/writeproxy_cvsroot
	  SECONDARY_CVSROOT=":ext;Redirect=no:$host$PRIMARY_CVSROOT_DIRNAME"

	  # Initialize the primary repository
	  dotest writeproxy-ssh-noredirect-init-1 \
"$testcvs -d$PRIMARY_CVSROOT init"
	  mkdir writeproxy-ssh-noredirect; cd writeproxy-ssh-noredirect
	  mkdir primary; cd primary
	  dotest writeproxy-ssh-noredirect-init-2 \
"$testcvs -Qd$PRIMARY_CVSROOT co CVSROOT"
	  cd CVSROOT
	  cat >>loginfo <<EOF
ALL $RSYNC -gopr --delete $PRIMARY_CVSROOT_DIRNAME/ $SECONDARY_CVSROOT_DIRNAME
EOF
	  cat >>loginfo <<EOF
ALL echo Referrer=%R; cat >/dev/null
EOF
	  cat >>config <<EOF
PrimaryServer=$PRIMARY_CVSROOT
EOF
	  dotest writeproxy-ssh-noredirect-init-3 \
"$testcvs -Q ci -mconfigure-writeproxy-ssh-noredirect" \
"Referrer=NONE"

	  # And now the secondary.
	  $RSYNC -gopr $PRIMARY_CVSROOT_DIRNAME/ $SECONDARY_CVSROOT_DIRNAME

	  # Wrap the CVS server to allow --primary-root to be set by the
	  # secondary.
	  cat <<EOF >$TESTDIR/writeproxy-secondary-wrapper
#! $TESTSHELL
CVS_SERVER=$TESTDIR/writeproxy-primary-wrapper
export CVS_SERVER

# No need to check the PID of the last client since we are testing with
# Redirect disabled.
proot_arg="--allow-root=$SECONDARY_CVSROOT_DIRNAME"
exec $CVS_SERVER \$proot_arg "\$@"
EOF
	  cat <<EOF >$TESTDIR/writeproxy-primary-wrapper
#! $TESTSHELL
if test -n "\$CVS_SERVER_LOG"; then
	CVS_SERVER_LOG=$TMPDIR/cvsprimarylog; export CVS_SERVER_LOG
fi
exec $CVS_SERVER "\$@"
EOF

	  CVS_SERVER_save=$CVS_SERVER
	  CVS_SERVER_secondary=$TESTDIR/writeproxy-secondary-wrapper
	  CVS_SERVER=$CVS_SERVER_secondary

	  chmod a+x $TESTDIR/writeproxy-secondary-wrapper \
	            $TESTDIR/writeproxy-primary-wrapper

	  # Checkout from secondary
	  #
	  # For now, move the primary root out of the way to satisfy
	  # ourselves that the data is coming from the secondary.
	  mv $PRIMARY_CVSROOT_DIRNAME $TESTDIR/save-root

	  # Checkin to secondary
	  cd ../..
	  dotest writeproxy-ssh-noredirect-1 \
"$testcvs -qd '$SECONDARY_CVSROOT' co -ldtop ."

	  cd top
	  mkdir firstdir

	  # Have to move the primary root back before we can perform write
	  # operations.
	  mv $TESTDIR/save-root $PRIMARY_CVSROOT_DIRNAME

	  dotest writeproxy-ssh-noredirect-2 "$testcvs -Q add firstdir" \
"Referrer=NONE"

	  cd firstdir
	  echo now you see me >file1
	  dotest writeproxy-ssh-noredirect-3 "$testcvs -Q add file1"
	  dotest writeproxy-ssh-noredirect-4 \
"$testcvs -Q ci -mfirst-file file1" \
"Referrer=NONE"

	  dokeep
	  cd ../../..
	  rm -r writeproxy-ssh-noredirect
	  rm -rf $PRIMARY_CVSROOT_DIRNAME $SECONDARY_CVSROOT_DIRNAME
	  PRIMARY_CVSROOT_DIRNAME=$PRIMARY_CVSROOT_DIRNAME_save
	  PRIMARY_CVSROOT=$PRIMARY_CVSROOT_save
	  SECONDARY_CVSROOT_DIRNAME=$SECONDARY_CVSROOT_DIRNAME_save
	  SECONDARY_CVSROOT=$SECONDARY_CVSROOT_save
	  rm $TESTDIR/writeproxy-secondary-wrapper \
	     $TESTDIR/writeproxy-primary-wrapper
	  CVS_SERVER=$CVS_SERVER_save
	  ;;



	trace)
	  # Check that there are no core dumps lurking in the trace
	  # options. 

	  # Perform some cleanup for normalized testing...
	  rm ${CVSROOT_DIRNAME}/CVSROOT/history
	  rm -f ${CVSROOT_DIRNAME}/CVSROOT/cvsignore
	  rm -f ${CVSROOT_DIRNAME}/CVSROOT/cvsignore,v

	  # checkout the trace option

	  mkdir trace && cd trace
	  mkdir imp && cd imp
	  touch file1

	  dotest_sort trace-1 "${testcvs} -t -t -t init" \
"  *-> Lock_Cleanup()
  *-> RCS_checkout (access,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (aclconfig,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (checkoutlist,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (commitinfo,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (config,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (cvswrappers,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (group,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (loginfo,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (modules,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (notify,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (postadmin,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (postproxy,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (posttag,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (postwatch,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (preproxy,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (rcsinfo,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (taginfo,v, , , , \.#[0-9][0-9]*)
  *-> RCS_checkout (verifymsg,v, , , , \.#[0-9][0-9]*)
  *-> Simple_Lock_Cleanup()
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> remove_locks()
  *-> unlink_file(\.#[0-9][0-9]*)
  *-> unlink_file(\.#[0-9][0-9]*)
  *-> unlink_file(\.#[0-9][0-9]*)
  *-> unlink_file(\.#[0-9][0-9]*)
  *-> unlink_file(\.#[0-9][0-9]*)
  *-> unlink_file(\.#[0-9][0-9]*)
  *-> unlink_file(\.#[0-9][0-9]*)
  *-> unlink_file(\.#[0-9][0-9]*)
  *-> unlink_file(\.#[0-9][0-9]*)
  *-> unlink_file(\.#[0-9][0-9]*)
  *-> unlink_file(\.#[0-9][0-9]*)
  *-> unlink_file(\.#[0-9][0-9]*)
  *-> unlink_file(\.#[0-9][0-9]*)
  *-> unlink_file(\.#access)
  *-> unlink_file(\.#aclconfig)
  *-> unlink_file(\.#checkoutlist)
  *-> unlink_file(\.#commitinfo)
  *-> unlink_file(\.#config)
  *-> unlink_file(\.#cvswrappers)
  *-> unlink_file(\.#group)
  *-> unlink_file(\.#loginfo)
  *-> unlink_file(\.#modules)
  *-> unlink_file(\.#notify)
  *-> unlink_file(\.#postadmin)
  *-> unlink_file(\.#postproxy)
  *-> unlink_file(\.#posttag)
  *-> unlink_file(\.#postwatch)
  *-> unlink_file(\.#preproxy)
  *-> unlink_file(\.#rcsinfo)
  *-> unlink_file(\.#taginfo)
  *-> unlink_file(\.#verifymsg)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )" \
"
  *-> Forking server: ${CVS_SERVER} server
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> CVS_SERVER_SLEEP not set\.
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> RCS_checkout (access,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (aclconfig,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (checkoutlist,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (commitinfo,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (config,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (cvswrappers,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (group,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (loginfo,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (modules,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (notify,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (postadmin,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (postproxy,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (posttag,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (postwatch,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (preproxy,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (rcsinfo,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (taginfo,v, , , , \.#[0-9][0-9]*)
S -> RCS_checkout (verifymsg,v, , , , \.#[0-9][0-9]*)
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> do_cvs_command (init)
S -> remove_locks()
S -> remove_locks()
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> unlink_file(\.#[0-9][0-9]*)
S -> unlink_file(\.#[0-9][0-9]*)
S -> unlink_file(\.#[0-9][0-9]*)
S -> unlink_file(\.#[0-9][0-9]*)
S -> unlink_file(\.#[0-9][0-9]*)
S -> unlink_file(\.#[0-9][0-9]*)
S -> unlink_file(\.#[0-9][0-9]*)
S -> unlink_file(\.#[0-9][0-9]*)
S -> unlink_file(\.#[0-9][0-9]*)
S -> unlink_file(\.#[0-9][0-9]*)
S -> unlink_file(\.#[0-9][0-9]*)
S -> unlink_file(\.#[0-9][0-9]*)
S -> unlink_file(\.#[0-9][0-9]*)
S -> unlink_file(\.#access)
S -> unlink_file(\.#aclconfig)
S -> unlink_file(\.#checkoutlist)
S -> unlink_file(\.#commitinfo)
S -> unlink_file(\.#config)
S -> unlink_file(\.#cvswrappers)
S -> unlink_file(\.#group)
S -> unlink_file(\.#loginfo)
S -> unlink_file(\.#modules)
S -> unlink_file(\.#notify)
S -> unlink_file(\.#postadmin)
S -> unlink_file(\.#postproxy)
S -> unlink_file(\.#posttag)
S -> unlink_file(\.#postwatch)
S -> unlink_file(\.#preproxy)
S -> unlink_file(\.#rcsinfo)
S -> unlink_file(\.#taginfo)
S -> unlink_file(\.#verifymsg)" \

	  dotest_sort trace-2 \
"${testcvs} -t -t -t import -mimport trace MYVENDOR version-1" \
"

  *-> Lock_Cleanup()
  *-> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/loginfo, trace, ALL)
  *-> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/verifymsg, trace, not ALL)
  *-> Simple_Lock_Cleanup()
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> remove_locks()
  *-> safe_location( where=(null) )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
N trace/file1
No conflicts created by this import" \
"


  *-> Forking server: ${CVS_SERVER} server
  *-> Sending file \`file1' to server
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
N trace/file1
No conflicts created by this import
S -> CVS_SERVER_SLEEP not set\.
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/loginfo, trace, ALL)
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/verifymsg, trace, not ALL)
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> do_cvs_command (import)
S -> remove_locks()
S -> remove_locks()
S -> safe_location( where=(null) )
S -> serve_directory (\.)
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()"

	  cd ..
	  rm -fr imp

	  dotest_sort trace-3 "${testcvs} -t -t -t co trace" \
"  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=1, repository_in=${CVSROOT_DIRNAME}/trace )
  *local=0, which=3, aflag=0,
  *locktype=1, update_preload=trace
  *-> Create_Admin
  *-> Create_Admin (\., trace, ${CVSROOT_DIRNAME}/trace, , , 0, 0, 1)
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Lock_Cleanup()
  *-> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.1\.1\.1, , , file1)
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace)
  *-> Register(file1, 1\.1\.1\.1, ${DATE}, ,  )
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Write_Template (trace, ${CVSROOT_DIRNAME}/trace)
  *-> chmod(file1,[0-7][0-7]*)
  *-> do_module (trace, Updating, NULL, NULL)
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> fopen(${CVSROOT_DIRNAME}/CVSROOT/history,a)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_simple_remove()
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> remove_locks()
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
  *-> safe_location( where=(null) )
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> unlink_file(\./CVS/Entries\.Static)
  *-> unlink_file(\./CVS/Tag)
  *-> unlink_file(CVS/Entries\.Log)
  *-> unlink_file_dir(CVS/,,file1)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
U trace/file1
${SPROG} checkout: Updating trace" \
"
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=1, repository_in=${CVSROOT_DIRNAME}/trace )
  *local=0, which=3, aflag=0,
  *locktype=1, update_preload=trace
  *-> Create_Admin
  *-> Create_Admin (trace, trace, ${CVSROOT_DIRNAME}/trace, , , 0, 0, 1)
  *-> Forking server: ${CVS_SERVER} server
  *-> Register(file1, 1\.1\.1\.1, ${DATE}, ,  )
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> rename(\.new\.file1,file1)
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
  *-> safe_location( where=(null) )
  *-> unlink_file(CVS/Entries\.Log)
  *-> unlink_file(CVS/Entries\.Static)
  *-> unlink_file(CVS/Tag)
  *-> unlink_file(CVS/Template)
  *-> unlink_file(trace/CVS/Tag)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> CVS_SERVER_SLEEP not set\.
S -> Create_Admin
S -> Create_Admin (\., trace, ${CVSROOT_DIRNAME}/trace, , , 0, 0, 1)
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/rcsinfo, trace, ALL)
S -> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.1\.1\.1, , , (function))
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace)
S -> Register(file1, 1\.1\.1\.1, , ,  )
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Write_Template (trace, ${CVSROOT_DIRNAME}/trace)
S -> dirswitch (\., ${CVSROOT_DIRNAME})
S -> dirswitch (\., ${CVSROOT_DIRNAME})
S -> do_cvs_command (checkout)
S -> do_module (trace, Updating, NULL, NULL)
S -> do_module (trace, Updating, NULL, NULL)
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> fopen(${CVSROOT_DIRNAME}/CVSROOT/history,a)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_simple_remove()
S -> remove_locks()
S -> remove_locks()
S -> rename(CVS/Entries\.Backup,CVS/Entries)
S -> safe_location( where=(null) )
S -> serve_directory (\.)
S -> serve_directory (\.)
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> server_register(file1, 1\.1\.1\.1, , , , , )
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> unlink_file(\./CVS/Entries\.Static)
S -> unlink_file(\./CVS/Tag)
S -> unlink_file(CVS/Entries\.Log)
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
U trace/file1
${SPROG} checkout: Updating trace"

	  cd trace
	  mkdir subdir
	  dotest_sort trace-4 "${testcvs} -t -t -t add subdir" \
"  *-> Create_Admin
  *-> Create_Admin (\., subdir, ${CVSROOT_DIRNAME}/trace/subdir, , , 0, 0, 1)
  *-> Lock_Cleanup()
  *-> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/loginfo, trace/subdir, ALL)
  *-> Simple_Lock_Cleanup()
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> remove_locks()
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
  *-> unlink_file(\./CVS/Tag)
  *-> unlink_file(${CVSROOT_DIRNAME}/trace/subdir/CVS/fileattr)
  *-> unlink_file(CVS/Entries\.Log)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
Directory ${CVSROOT_DIRNAME}/trace/subdir added to the repository" \
"
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *locktype=0, update_preload=(null)
  *-> Create_Admin
  *-> Create_Admin (subdir, subdir, ${CVSROOT_DIRNAME}/trace/subdir, , , 0, 0, 1)
  *-> Forking server: ${CVS_SERVER} server
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
${DOTSTAR}  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> unlink_file(CVS/Entries\.Log)
${DOTSTAR}  *-> unlink_file(CVS/Template)
  *-> unlink_file(subdir/CVS/Tag)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
${DOTSTAR}Directory ${CVSROOT_DIRNAME}/trace/subdir added to the repository
S -> CVS_SERVER_SLEEP not set\.
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/loginfo, trace/subdir, ALL)
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/rcsinfo, trace/subdir, ALL)
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Write_Template (subdir, ${CVSROOT_DIRNAME}/trace/subdir)
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> dirswitch (subdir, ${CVSROOT_DIRNAME}/trace/subdir)
S -> do_cvs_command (add)
S -> remove_locks()
S -> remove_locks()
S -> rename(CVS/Entries\.Backup,CVS/Entries)
S -> rename(CVS/Entries\.Backup,CVS/Entries)
S -> serve_directory (\.)
S -> serve_directory (subdir)
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> unlink_file(${CVSROOT_DIRNAME}/trace/subdir/CVS/fileattr)
S -> unlink_file(CVS/Entries\.Log)
S -> unlink_file(CVS/Entries\.Log)
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )"
	  touch file2
	  dotest_sort trace-5 "${testcvs} -t -t -t add file2" \
"  *-> Lock_Cleanup()
  *-> Register(file2, 0, Initial file2, ,  )
  *-> Simple_Lock_Cleanup()
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> remove_locks()
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
  *-> unlink_file(CVS/Entries\.Log)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
${SPROG} add: scheduling file \`file2' for addition
${SPROG} add: use \`${SPROG} commit' to add this file permanently" \
"
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *locktype=0, update_preload=(null)
  *-> Forking server: ${CVS_SERVER} server
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Register(file2, 0, dummy timestamp, ,  )
  *-> do_recursion ( frame=${PFMT} )
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
${DOTSTAR}  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> unlink_file(CVS/Entries\.Log)
${DOTSTAR}  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
${DOTSTAR}S -> CVS_SERVER_SLEEP not set\.
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Register(file2, 0, Initial file2, ,  )
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> do_cvs_command (add)
S -> remove_locks()
S -> remove_locks()
S -> rename(CVS/Entries\.Backup,CVS/Entries)
S -> serve_directory (\.)
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> server_register(file2, 0, Initial file2, , , , )
S -> unlink_file(CVS/Entries\.Log)
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
${SPROG} add: scheduling file \`file2' for addition
${SPROG} add: use \`${SPROG} commit' to add this file permanently"
	  dotest_sort trace-6 "${testcvs} -t -t -t ci -mnew-file file2" \
"  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *locktype=0, update_preload=(null)
  *locktype=0, update_preload=(null)
  *locktype=2, update_preload=(null)
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Lock_Cleanup()
  *-> Lock_Cleanup()
  *-> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/commitinfo, trace, ALL)
  *-> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/loginfo, trace, ALL)
  *-> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/verifymsg, trace, not ALL)
  *-> Promotable_Lock ()
  *-> RCS_checkout (${CVSROOT_DIRNAME}/trace/file2,v, 1, , , (function))
  *-> RCS_cmp_file( ${CVSROOT_DIRNAME}/trace/file2,v, 1, (null), , file2 )
  *-> Register(file2, 1\.1, ${DATE}, ,  )
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.\*, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> fopen(${CVSROOT_DIRNAME}/CVSROOT/history,a)
  *-> lock_dir_for_write (${CVSROOT_DIRNAME}/trace)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> lock_tree_promotably (1, argv, 0, 1, 0)
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> promotable_exists (${CVSROOT_DIRNAME}/trace)
  *-> promotable_exists (${CVSROOT_DIRNAME}/trace)
  *-> promotable_lock(${CVSROOT_DIRNAME}/trace)
  *-> rcs_cleanup()
  *-> readers_exist (${CVSROOT_DIRNAME}/trace)
  *-> remove_locks()
  *-> remove_locks()
  *-> rename(${CVSROOT_DIRNAME}/trace/,file2,,${CVSROOT_DIRNAME}/trace/file2,v)
  *-> rename(${CVSROOT_DIRNAME}/trace/,file2,,${CVSROOT_DIRNAME}/trace/file2,v)
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 0)
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> unlink_file(CVS/Base/file2)
  *-> unlink_file(CVS/Entries\.Log)
  *-> unlink_file(CVS/file2,t)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
${CVSROOT_DIRNAME}/trace/file2,v  <--  file2
initial revision: 1\.1" \
"
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *dosrcs=0, repository_in=(null) )
  *dosrcs=0, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *locktype=0, update_preload=(null)
  *locktype=0, update_preload=(null)
  *locktype=0, update_preload=(null)
  *locktype=0, update_preload=(null)
  *locktype=2, update_preload=(null)
  *-> Forking server: ${CVS_SERVER} server
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Register(file2, 1\.1, ${DATE}, ,  )
  *-> Sending file \`file2' to server
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> unlink_file(CVS/Base/file2)
  *-> unlink_file(CVS/Entries\.Log)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
${CVSROOT_DIRNAME}/trace/file2,v  <--  file2
S -> CVS_SERVER_SLEEP not set\.
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/commitinfo, trace, ALL)
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/loginfo, trace, ALL)
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/verifymsg, trace, not ALL)
S -> Promotable_Lock ()
S -> RCS_checkout (${CVSROOT_DIRNAME}/trace/file2,v, 1, , , (function))
S -> RCS_cmp_file( ${CVSROOT_DIRNAME}/trace/file2,v, 1, (null), , file2 )
S -> Register(file2, 1\.1, ${DATE}, ,  )
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
S -> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
S -> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.\*, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> do_cvs_command (commit)
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> fopen(${CVSROOT_DIRNAME}/CVSROOT/history,a)
S -> lock_dir_for_write (${CVSROOT_DIRNAME}/trace)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace, )
S -> lock_name (${CVSROOT_DIRNAME}/trace, )
S -> lock_name (${CVSROOT_DIRNAME}/trace, )
S -> lock_simple_remove()
S -> lock_simple_remove()
S -> lock_tree_promotably (1, argv, 0, 1, 0)
S -> promotable_exists (${CVSROOT_DIRNAME}/trace)
S -> promotable_exists (${CVSROOT_DIRNAME}/trace)
S -> promotable_lock(${CVSROOT_DIRNAME}/trace)
S -> rcs_cleanup()
S -> readers_exist (${CVSROOT_DIRNAME}/trace)
S -> remove_locks()
S -> remove_locks()
S -> remove_locks()
S -> rename(${CVSROOT_DIRNAME}/trace/,file2,,${CVSROOT_DIRNAME}/trace/file2,v)
S -> rename(${CVSROOT_DIRNAME}/trace/,file2,,${CVSROOT_DIRNAME}/trace/file2,v)
S -> rename(CVS/Entries\.Backup,CVS/Entries)
S -> serve_directory (\.)
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> server_pathname_check (file2)
S -> server_pathname_check (file2)
S -> server_pathname_check (file2)
S -> server_register(file2, 1\.1, ${DATE}, , , , )
S -> set_lock (${CVSROOT_DIRNAME}/trace, 0)
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> unlink_file(CVS/Entries\.Log)
S -> unlink_file(CVS/file2,t)
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
initial revision: 1\.1"
	  dotest_sort trace-7 "${testcvs} -t -t -t tag bp" \
"  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=1, repository_in= )
  *dosrcs=1, repository_in= )
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *locktype=1, update_preload=(null)
  *locktype=2, update_preload=(null)
  *local_specified=0, mname=(null), msg=(null) )
  *mwhere=(null), mfile=(null), shorten=0,
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Lock_Cleanup()
  *-> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/taginfo, trace, ALL)
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace)
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace/subdir)
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, (null))
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.\*, (null))
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.pfl\.\*, (null))
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.\*, (null))
  *-> check_fileproc ( ${CVSROOT_DIRNAME}/trace, file1, ${CVSROOT_DIRNAME}/trace/file1,v )
  *-> check_fileproc ( ${CVSROOT_DIRNAME}/trace, file2, ${CVSROOT_DIRNAME}/trace/file2,v )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> lock_dir_for_write (${CVSROOT_DIRNAME}/trace)
  *-> lock_dir_for_write (${CVSROOT_DIRNAME}/trace/subdir)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, )
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> promotable_exists (${CVSROOT_DIRNAME}/trace)
  *-> promotable_exists (${CVSROOT_DIRNAME}/trace/subdir)
  *-> rcs_cleanup()
  *-> readers_exist (${CVSROOT_DIRNAME}/trace)
  *-> readers_exist (${CVSROOT_DIRNAME}/trace/subdir)
  *-> remove_locks()
  *-> rename(${CVSROOT_DIRNAME}/trace/,file1,,${CVSROOT_DIRNAME}/trace/file1,v)
  *-> rename(${CVSROOT_DIRNAME}/trace/,file2,,${CVSROOT_DIRNAME}/trace/file2,v)
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
  *-> rtag_proc ( argc=1, argv=${PFMT}, xwhere=(null),
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
  *-> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> unlink_file(CVS/Entries\.Log)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
T file1
T file2
${SPROG} tag: Tagging \.
${SPROG} tag: Tagging subdir" \
"
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *dosrcs=1, repository_in= )
  *dosrcs=1, repository_in= )
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *locktype=0, update_preload=(null)
  *locktype=1, update_preload=(null)
  *locktype=2, update_preload=(null)
  *local_specified=0, mname=(null), msg=(null) )
  *mwhere=(null), mfile=(null), shorten=0,
  *-> Forking server: ${CVS_SERVER} server
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> CVS_SERVER_SLEEP not set\.
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/taginfo, trace, ALL)
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace)
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace/subdir)
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, (null))
S -> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.\*, (null))
S -> _lock_exists (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.pfl\.\*, (null))
S -> _lock_exists (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.\*, (null))
S -> check_fileproc ( ${CVSROOT_DIRNAME}/trace, file1, ${CVSROOT_DIRNAME}/trace/file1,v )
S -> check_fileproc ( ${CVSROOT_DIRNAME}/trace, file2, ${CVSROOT_DIRNAME}/trace/file2,v )
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> dirswitch (subdir, ${CVSROOT_DIRNAME}/trace/subdir)
S -> do_cvs_command (tag)
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> lock_dir_for_write (${CVSROOT_DIRNAME}/trace)
S -> lock_dir_for_write (${CVSROOT_DIRNAME}/trace/subdir)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace, )
S -> lock_name (${CVSROOT_DIRNAME}/trace, )
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, )
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, )
S -> lock_simple_remove()
S -> lock_simple_remove()
S -> lock_simple_remove()
S -> lock_simple_remove()
S -> promotable_exists (${CVSROOT_DIRNAME}/trace)
S -> promotable_exists (${CVSROOT_DIRNAME}/trace/subdir)
S -> rcs_cleanup()
S -> readers_exist (${CVSROOT_DIRNAME}/trace)
S -> readers_exist (${CVSROOT_DIRNAME}/trace/subdir)
S -> remove_locks()
S -> remove_locks()
S -> rename(${CVSROOT_DIRNAME}/trace/,file1,,${CVSROOT_DIRNAME}/trace/file1,v)
S -> rename(${CVSROOT_DIRNAME}/trace/,file2,,${CVSROOT_DIRNAME}/trace/file2,v)
S -> rename(CVS/Entries\.Backup,CVS/Entries)
S -> rename(CVS/Entries\.Backup,CVS/Entries)
S -> rtag_proc ( argc=1, argv=${PFMT}, xwhere=(null),
S -> serve_directory (\.)
S -> serve_directory (\.)
S -> serve_directory (subdir)
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
S -> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> unlink_file(CVS/Entries\.Log)
S -> unlink_file(CVS/Entries\.Log)
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
T file1
T file2
${SPROG} tag: Tagging \.
${SPROG} tag: Tagging subdir"

	  dotest_sort trace-8 "${testcvs} -t -t -t tag -b branch1" \
"  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=1, repository_in= )
  *dosrcs=1, repository_in= )
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *locktype=1, update_preload=(null)
  *locktype=2, update_preload=(null)
  *local_specified=0, mname=(null), msg=(null) )
  *mwhere=(null), mfile=(null), shorten=0,
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Lock_Cleanup()
  *-> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/taginfo, trace, ALL)
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace)
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace/subdir)
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, (null))
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.\*, (null))
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.pfl\.\*, (null))
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.\*, (null))
  *-> check_fileproc ( ${CVSROOT_DIRNAME}/trace, file1, ${CVSROOT_DIRNAME}/trace/file1,v )
  *-> check_fileproc ( ${CVSROOT_DIRNAME}/trace, file2, ${CVSROOT_DIRNAME}/trace/file2,v )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> lock_dir_for_write (${CVSROOT_DIRNAME}/trace)
  *-> lock_dir_for_write (${CVSROOT_DIRNAME}/trace/subdir)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, )
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> promotable_exists (${CVSROOT_DIRNAME}/trace)
  *-> promotable_exists (${CVSROOT_DIRNAME}/trace/subdir)
  *-> rcs_cleanup()
  *-> readers_exist (${CVSROOT_DIRNAME}/trace)
  *-> readers_exist (${CVSROOT_DIRNAME}/trace/subdir)
  *-> remove_locks()
  *-> rename(${CVSROOT_DIRNAME}/trace/,file1,,${CVSROOT_DIRNAME}/trace/file1,v)
  *-> rename(${CVSROOT_DIRNAME}/trace/,file2,,${CVSROOT_DIRNAME}/trace/file2,v)
  *-> rtag_proc ( argc=1, argv=${PFMT}, xwhere=(null),
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
  *-> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
T file1
T file2
${SPROG} tag: Tagging \.
${SPROG} tag: Tagging subdir" \
"
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *dosrcs=1, repository_in= )
  *dosrcs=1, repository_in= )
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *locktype=0, update_preload=(null)
  *locktype=1, update_preload=(null)
  *locktype=2, update_preload=(null)
  *local_specified=0, mname=(null), msg=(null) )
  *mwhere=(null), mfile=(null), shorten=0,
  *-> Forking server: ${CVS_SERVER} server
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> CVS_SERVER_SLEEP not set\.
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/taginfo, trace, ALL)
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace)
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace/subdir)
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, (null))
S -> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.\*, (null))
S -> _lock_exists (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.pfl\.\*, (null))
S -> _lock_exists (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.\*, (null))
S -> check_fileproc ( ${CVSROOT_DIRNAME}/trace, file1, ${CVSROOT_DIRNAME}/trace/file1,v )
S -> check_fileproc ( ${CVSROOT_DIRNAME}/trace, file2, ${CVSROOT_DIRNAME}/trace/file2,v )
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> dirswitch (subdir, ${CVSROOT_DIRNAME}/trace/subdir)
S -> do_cvs_command (tag)
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> lock_dir_for_write (${CVSROOT_DIRNAME}/trace)
S -> lock_dir_for_write (${CVSROOT_DIRNAME}/trace/subdir)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace, )
S -> lock_name (${CVSROOT_DIRNAME}/trace, )
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, )
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, )
S -> lock_simple_remove()
S -> lock_simple_remove()
S -> lock_simple_remove()
S -> lock_simple_remove()
S -> promotable_exists (${CVSROOT_DIRNAME}/trace)
S -> promotable_exists (${CVSROOT_DIRNAME}/trace/subdir)
S -> rcs_cleanup()
S -> readers_exist (${CVSROOT_DIRNAME}/trace)
S -> readers_exist (${CVSROOT_DIRNAME}/trace/subdir)
S -> remove_locks()
S -> remove_locks()
S -> rename(${CVSROOT_DIRNAME}/trace/,file1,,${CVSROOT_DIRNAME}/trace/file1,v)
S -> rename(${CVSROOT_DIRNAME}/trace/,file2,,${CVSROOT_DIRNAME}/trace/file2,v)
S -> rename(CVS/Entries\.Backup,CVS/Entries)
S -> rename(CVS/Entries\.Backup,CVS/Entries)
S -> rtag_proc ( argc=1, argv=${PFMT}, xwhere=(null),
S -> serve_directory (\.)
S -> serve_directory (\.)
S -> serve_directory (subdir)
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
S -> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> unlink_file(CVS/Entries\.Log)
S -> unlink_file(CVS/Entries\.Log)
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
T file1
T file2
${SPROG} tag: Tagging \.
${SPROG} tag: Tagging subdir"
	  dotest_sort trace-9 "${testcvs} -t -t -t log" \
"

  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=1, repository_in=(null) )
  *local=0, which=7, aflag=0,
  *locktype=1, update_preload=(null)
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Lock_Cleanup()
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace)
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace/subdir)
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> remove_locks()
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
 MYVENDOR: 1\.1\.1
 bp: 1\.1
 bp: 1\.1\.1\.1
 branch1: 1\.1\.0\.2
 branch1: 1\.1\.1\.1\.0\.2
 version-1: 1\.1\.1\.1
----------------------------
----------------------------
----------------------------
=============================================================================
=============================================================================
Initial revision
RCS file: ${CVSROOT_DIRNAME}/trace/file1,v
RCS file: ${CVSROOT_DIRNAME}/trace/file2,v
Working file: file1
Working file: file2
access list:
access list:
branch:
branch: 1\.1\.1
branches:  1\.1\.1;
${SPROG} log: Logging \.
${SPROG} log: Logging subdir
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}0 -0;  commitid: ${commitid};
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
description:
description:
head: 1\.1
head: 1\.1
import
keyword substitution: kv
keyword substitution: kv
locks: strict
locks: strict
new-file
revision 1\.1
revision 1\.1
revision 1\.1\.1\.1
symbolic names:
symbolic names:
total revisions: 1; selected revisions: 1
total revisions: 2; selected revisions: 2" \
"


  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *local=0, which=7, aflag=0,
  *locktype=0, update_preload=(null)
  *locktype=1, update_preload=(null)
  *-> Forking server: ${CVS_SERVER} server
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
 MYVENDOR: 1\.1\.1
 bp: 1\.1
 bp: 1\.1\.1\.1
 branch1: 1\.1\.0\.2
 branch1: 1\.1\.1\.1\.0\.2
 version-1: 1\.1\.1\.1
----------------------------
----------------------------
----------------------------
=============================================================================
=============================================================================
Initial revision
RCS file: ${CVSROOT_DIRNAME}/trace/file1,v
RCS file: ${CVSROOT_DIRNAME}/trace/file2,v
S -> CVS_SERVER_SLEEP not set\.
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace)
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace/subdir)
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> dirswitch (subdir, ${CVSROOT_DIRNAME}/trace/subdir)
S -> do_cvs_command (log)
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_simple_remove()
S -> lock_simple_remove()
S -> remove_locks()
S -> remove_locks()
S -> rename(CVS/Entries\.Backup,CVS/Entries)
S -> rename(CVS/Entries\.Backup,CVS/Entries)
S -> serve_directory (\.)
S -> serve_directory (\.)
S -> serve_directory (subdir)
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> unlink_file(CVS/Entries\.Log)
S -> unlink_file(CVS/Entries\.Log)
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
Working file: file1
Working file: file2
access list:
access list:
branch:
branch: 1\.1\.1
branches:  1\.1\.1;
${SPROG} log: Logging \.
${SPROG} log: Logging subdir
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
date: ${ISO8601DATE};  author: ${username};  state: Exp;  lines: ${PLUS}0 -0;  commitid: ${commitid};
date: ${ISO8601DATE};  author: ${username};  state: Exp;  commitid: ${commitid};
description:
description:
head: 1\.1
head: 1\.1
import
keyword substitution: kv
keyword substitution: kv
locks: strict
locks: strict
new-file
revision 1\.1
revision 1\.1
revision 1\.1\.1\.1
symbolic names:
symbolic names:
total revisions: 1; selected revisions: 1
total revisions: 2; selected revisions: 2"

	  dotest_sort trace-10 "${testcvs} -t -t -t annotate file1" \
"
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=1, repository_in= )
  *local=0, which=1, aflag=0,
  *locktype=1, update_preload=(null)
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Lock_Cleanup()
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace)
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> do_recursion ( frame=${PFMT} )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_simple_remove()
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> remove_locks()
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
Annotations for file1" \
"

  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *dosrcs=1, repository_in= )
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *locktype=0, update_preload=(null)
  *locktype=1, update_preload=(null)
  *-> Forking server: ${CVS_SERVER} server
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
Annotations for file1
S -> CVS_SERVER_SLEEP not set\.
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace)
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> do_cvs_command (annotate)
S -> do_recursion ( frame=${PFMT} )
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_simple_remove()
S -> remove_locks()
S -> remove_locks()
S -> serve_directory (\.)
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> server_pathname_check (file1)
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )"

	  dotest_sort \
trace-11 "${testcvs} -t -t -t rtag -r bp -b branch2 trace" \
"  *aflag=0, repository=${CVSROOT_DIRNAME}/trace )
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=1, repository_in=${CVSROOT_DIRNAME}/trace )
  *dosrcs=1, repository_in=${CVSROOT_DIRNAME}/trace )
  *dosrcs=1, repository_in=${CVSROOT_DIRNAME}/trace )
  *local=0, which=6, aflag=0,
  *local=0, which=6, aflag=0,
  *local=0, which=6, aflag=0,
  *locktype=1, update_preload=(null)
  *locktype=1, update_preload=trace
  *locktype=2, update_preload=trace
  *local_specified=0, mname=trace, msg=Tagging )
  *mwhere=(null), mfile=(null), shorten=0,
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Lock_Cleanup()
  *-> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/taginfo, trace, ALL)
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace)
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace)
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace/subdir)
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace/subdir)
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, (null))
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.\*, (null))
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.pfl\.\*, (null))
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.\*, (null))
  *-> check_fileproc ( ${CVSROOT_DIRNAME}/trace, trace/file1, ${CVSROOT_DIRNAME}/trace/file1,v )
  *-> check_fileproc ( ${CVSROOT_DIRNAME}/trace, trace/file2, ${CVSROOT_DIRNAME}/trace/file2,v )
  *-> do_module (trace, Tagging, NULL, branch2)
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> fopen(${CVSROOT_DIRNAME}/CVSROOT/history,a)
  *-> lock_dir_for_write (${CVSROOT_DIRNAME}/trace)
  *-> lock_dir_for_write (${CVSROOT_DIRNAME}/trace/subdir)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, )
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> promotable_exists (${CVSROOT_DIRNAME}/trace)
  *-> promotable_exists (${CVSROOT_DIRNAME}/trace/subdir)
  *-> rcs_cleanup()
  *-> readers_exist (${CVSROOT_DIRNAME}/trace)
  *-> readers_exist (${CVSROOT_DIRNAME}/trace/subdir)
  *-> remove_locks()
  *-> rename(${CVSROOT_DIRNAME}/trace/,file1,,${CVSROOT_DIRNAME}/trace/file1,v)
  *-> rename(${CVSROOT_DIRNAME}/trace/,file2,,${CVSROOT_DIRNAME}/trace/file2,v)
  *-> rtag_proc ( argc=1, argv=${PFMT}, xwhere=(null),
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
  *-> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
  *-> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> tag_check_valid ( name=bp, argc=0, argv=${PFMT}, local=0,
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
${SPROG} rtag: Tagging trace
${SPROG} rtag: Tagging trace/subdir" \
"
  *aflag=0, repository=${CVSROOT_DIRNAME}/trace )
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=1, repository_in=${CVSROOT_DIRNAME}/trace )
  *dosrcs=1, repository_in=${CVSROOT_DIRNAME}/trace )
  *dosrcs=1, repository_in=${CVSROOT_DIRNAME}/trace )
  *local=0, which=6, aflag=0,
  *local=0, which=6, aflag=0,
  *local=0, which=6, aflag=0,
  *locktype=1, update_preload=(null)
  *locktype=1, update_preload=trace
  *locktype=2, update_preload=trace
  *local_specified=0, mname=trace, msg=Tagging )
  *mwhere=(null), mfile=(null), shorten=0,
  *-> Forking server: ${CVS_SERVER} server
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> CVS_SERVER_SLEEP not set\.
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/taginfo, trace, ALL)
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace)
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace)
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace/subdir)
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace/subdir)
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, (null))
S -> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.\*, (null))
S -> _lock_exists (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.pfl\.\*, (null))
S -> _lock_exists (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.\*, (null))
S -> check_fileproc ( ${CVSROOT_DIRNAME}/trace, trace/file1, ${CVSROOT_DIRNAME}/trace/file1,v )
S -> check_fileproc ( ${CVSROOT_DIRNAME}/trace, trace/file2, ${CVSROOT_DIRNAME}/trace/file2,v )
S -> do_cvs_command (rtag)
S -> do_module (trace, Tagging, NULL, branch2)
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> fopen(${CVSROOT_DIRNAME}/CVSROOT/history,a)
S -> lock_dir_for_write (${CVSROOT_DIRNAME}/trace)
S -> lock_dir_for_write (${CVSROOT_DIRNAME}/trace/subdir)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace, )
S -> lock_name (${CVSROOT_DIRNAME}/trace, )
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, )
S -> lock_name (${CVSROOT_DIRNAME}/trace/subdir, )
S -> lock_simple_remove()
S -> lock_simple_remove()
S -> lock_simple_remove()
S -> lock_simple_remove()
S -> lock_simple_remove()
S -> lock_simple_remove()
S -> promotable_exists (${CVSROOT_DIRNAME}/trace)
S -> promotable_exists (${CVSROOT_DIRNAME}/trace/subdir)
S -> rcs_cleanup()
S -> readers_exist (${CVSROOT_DIRNAME}/trace)
S -> readers_exist (${CVSROOT_DIRNAME}/trace/subdir)
S -> remove_locks()
S -> remove_locks()
S -> rename(${CVSROOT_DIRNAME}/trace/,file1,,${CVSROOT_DIRNAME}/trace/file1,v)
S -> rename(${CVSROOT_DIRNAME}/trace/,file2,,${CVSROOT_DIRNAME}/trace/file2,v)
S -> rtag_proc ( argc=1, argv=${PFMT}, xwhere=(null),
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
S -> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
S -> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> tag_check_valid ( name=bp, argc=0, argv=${PFMT}, local=0,
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
${SPROG} rtag: Tagging trace
${SPROG} rtag: Tagging trace/subdir"

	  dotest_sort trace-12 "${testcvs} -t -t -t status file1" \
"

  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=1, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *locktype=1, update_preload=(null)
   Repository revision: 1\.1\.1\.1 ${CVSROOT_DIRNAME}/trace/file1,v
   Sticky Date:  (none)
   Sticky Options: (none)
   Sticky Tag:  (none)
   Working revision: 1\.1\.1\.1 ${DATE}
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Lock_Cleanup()
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace)
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> do_recursion ( frame=${PFMT} )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_simple_remove()
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> remove_locks()
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
===================================================================
File: file1  *Status: Up-to-date" \
"


  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *locktype=0, update_preload=(null)
  *locktype=1, update_preload=(null)
   Repository revision: 1\.1\.1\.1 ${CVSROOT_DIRNAME}/trace/file1,v
   Sticky Date:  (none)
   Sticky Options: (none)
   Sticky Tag:  (none)
   Working revision: 1\.1\.1\.1
  *-> Forking server: ${CVS_SERVER} server
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
===================================================================
File: file1  *Status: Up-to-date
S -> CVS_SERVER_SLEEP not set\.
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace)
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> do_cvs_command (status)
S -> do_recursion ( frame=${PFMT} )
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_simple_remove()
S -> remove_locks()
S -> remove_locks()
S -> serve_directory (\.)
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> server_pathname_check (file1)
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )"

	  echo foo >> file1
	  dotest_sort trace-13 "${testcvs} -t -t -t up -C file1" \
"  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=1, repository_in=(null) )
  *local=0, which=3, aflag=0,
  *locktype=1, update_preload=(null)
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Lock_Cleanup()
  *-> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.1\.1\.1, , , (function))
  *-> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.1\.1\.1, , , file1)
  *-> RCS_cmp_file( ${CVSROOT_DIRNAME}/trace/file1,v, 1\.1\.1\.1, (null), , file1 )
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace)
  *-> Register(file1, 1\.1\.1\.1, ${DATE}, ,  )
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> chmod(file1,[0-7][0-7]*)
  *-> copy(file1,\.#file1\.1\.1\.1\.1)
  *-> do_recursion ( frame=${PFMT} )
  *-> fopen(${CVSROOT_DIRNAME}/CVSROOT/history,a)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_simple_remove()
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> remove_locks()
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
  *-> rename(file1,CVS/,,file1)
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> unlink_file(CVS/Entries\.Log)
  *-> unlink_file_dir(CVS/,,file1)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
(Locally modified file1 moved to \.#file1\.1\.1\.1\.1)
U file1" \
"
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *local=0, which=3, aflag=0,
  *locktype=0, update_preload=(null)
  *locktype=1, update_preload=(null)
  *-> Forking server: ${CVS_SERVER} server
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Register(file1, 1\.1\.1\.1, ${DATE}, ,  )
  *-> copy(file1,\.#file1\.1\.1\.1\.1)
  *-> do_recursion ( frame=${PFMT} )
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> rename(\.new\.file1,file1)
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> unlink_file(CVS/Entries\.Log)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
(Locally modified file1 moved to \.#file1\.1\.1\.1\.1)
S -> CVS_SERVER_SLEEP not set\.
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.1\.1\.1, , , (function))
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace)
S -> Register(file1, 1\.1\.1\.1, M, ,  )
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> do_cvs_command (update)
S -> do_recursion ( frame=${PFMT} )
S -> fopen(${CVSROOT_DIRNAME}/CVSROOT/history,a)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_simple_remove()
S -> remove_locks()
S -> remove_locks()
S -> rename(CVS/Entries\.Backup,CVS/Entries)
S -> serve_directory (\.)
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> server_pathname_check (file1)
S -> server_register(file1, 1\.1\.1\.1, M, , , , )
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> unlink_file(CVS/Entries\.Log)
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
U file1"
	  echo foo >> file1
	  dotest_sort trace-14 "${testcvs} -t -t -t ci -madd-data file1" \
"  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *locktype=0, update_preload=(null)
  *locktype=0, update_preload=(null)
  *locktype=2, update_preload=(null)
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Lock_Cleanup()
  *-> Lock_Cleanup()
  *-> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/commitinfo, trace, ALL)
  *-> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/loginfo, trace, ALL)
  *-> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/verifymsg, trace, not ALL)
  *-> Promotable_Lock ()
  *-> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, , , , (function))
  *-> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.1, , -ko, ${tempname})
  *-> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.1\.1\.1, , , (function))
  *-> RCS_cmp_file( ${CVSROOT_DIRNAME}/trace/file1,v, (null), (null), , file1 )
  *-> RCS_cmp_file( ${CVSROOT_DIRNAME}/trace/file1,v, 1\.1\.1\.1, (null), , file1 )
  *-> Register(file1, 1\.2, ${DATE}, ,  )
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.\*, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> fopen(${CVSROOT_DIRNAME}/CVSROOT/history,a)
  *-> lock_dir_for_write (${CVSROOT_DIRNAME}/trace)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> lock_tree_promotably (1, argv, 0, 1, 0)
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> promotable_exists (${CVSROOT_DIRNAME}/trace)
  *-> promotable_exists (${CVSROOT_DIRNAME}/trace)
  *-> promotable_lock(${CVSROOT_DIRNAME}/trace)
  *-> rcs_cleanup()
  *-> readers_exist (${CVSROOT_DIRNAME}/trace)
  *-> remove_locks()
  *-> remove_locks()
  *-> rename(${CVSROOT_DIRNAME}/trace/,file1,,${CVSROOT_DIRNAME}/trace/file1,v)
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 0)
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> unlink_file(${tempname})
  *-> unlink_file(${tempname})
  *-> unlink_file(CVS/Base/file1)
  *-> unlink_file(CVS/Entries\.Log)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
${CVSROOT_DIRNAME}/trace/file1,v  <--  file1
new revision: 1\.2; previous revision: 1\.1" \
"
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *dosrcs=0, repository_in=(null) )
  *dosrcs=0, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *locktype=0, update_preload=(null)
  *locktype=0, update_preload=(null)
  *locktype=0, update_preload=(null)
  *locktype=0, update_preload=(null)
  *locktype=2, update_preload=(null)
  *-> Forking server: ${CVS_SERVER} server
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Register(file1, 1\.2, ${DATE}, ,  )
  *-> Sending file \`file1' to server
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> unlink_file(CVS/Base/file1)
  *-> unlink_file(CVS/Entries\.Log)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
${CVSROOT_DIRNAME}/trace/file1,v  <--  file1
S -> CVS_SERVER_SLEEP not set\.
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/commitinfo, trace, ALL)
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/loginfo, trace, ALL)
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/verifymsg, trace, not ALL)
S -> Promotable_Lock ()
S -> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, , , , (function))
S -> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.1, , -ko, ${tempname})
S -> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.1\.1\.1, , , (function))
S -> RCS_cmp_file( ${CVSROOT_DIRNAME}/trace/file1,v, (null), (null), , file1 )
S -> RCS_cmp_file( ${CVSROOT_DIRNAME}/trace/file1,v, 1\.1\.1\.1, (null), , file1 )
S -> Register(file1, 1\.2, ${DATE}, ,  )
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
S -> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
S -> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.\*, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> do_cvs_command (commit)
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> fopen(${CVSROOT_DIRNAME}/CVSROOT/history,a)
S -> lock_dir_for_write (${CVSROOT_DIRNAME}/trace)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace, )
S -> lock_name (${CVSROOT_DIRNAME}/trace, )
S -> lock_name (${CVSROOT_DIRNAME}/trace, )
S -> lock_simple_remove()
S -> lock_simple_remove()
S -> lock_tree_promotably (1, argv, 0, 1, 0)
S -> promotable_exists (${CVSROOT_DIRNAME}/trace)
S -> promotable_exists (${CVSROOT_DIRNAME}/trace)
S -> promotable_lock(${CVSROOT_DIRNAME}/trace)
S -> rcs_cleanup()
S -> readers_exist (${CVSROOT_DIRNAME}/trace)
S -> remove_locks()
S -> remove_locks()
S -> remove_locks()
S -> rename(${CVSROOT_DIRNAME}/trace/,file1,,${CVSROOT_DIRNAME}/trace/file1,v)
S -> rename(CVS/Entries\.Backup,CVS/Entries)
S -> serve_directory (\.)
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> server_pathname_check (file1)
S -> server_pathname_check (file1)
S -> server_pathname_check (file1)
S -> server_register(file1, 1\.2, ${DATE}, , , , )
S -> set_lock (${CVSROOT_DIRNAME}/trace, 0)
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> unlink_file(${tempname})
S -> unlink_file(${tempname})
S -> unlink_file(CVS/Entries\.Log)
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
new revision: 1\.2; previous revision: 1\.1"

	  dotest_fail_sort trace-15 "${testcvs} -t -t -t diff -r1.1 file1" \
"  *aflag=0, repository= )
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=1, repository_in=(null) )
  *local=0, which=7, aflag=0,
  *locktype=1, update_preload=(null)
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Lock_Cleanup()
  *-> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.1, , , ${tempname})
  *-> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.2, , , (function))
  *-> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.2, , , ${tempname})
  *-> RCS_cmp_file( ${CVSROOT_DIRNAME}/trace/file1,v, 1\.1, 1\.2, , file1 )
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace)
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> diff_file_nodiff (file1, 3)
  *-> do_recursion ( frame=${PFMT} )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_simple_remove()
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> remove_locks()
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> tag_check_valid ( name=1\.1, argc=1, argv=${PFMT}, local=0,
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
0a1
===================================================================
> foo
Index: file1
RCS file: ${CVSROOT_DIRNAME}/trace/file1,v
diff -r1\.1 -r1\.2
retrieving revision 1\.1
retrieving revision 1\.2" \
"
  *aflag=0, repository= )
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *local=0, which=7, aflag=0,
  *locktype=0, update_preload=(null)
  *locktype=1, update_preload=(null)
  *-> Forking server: ${CVS_SERVER} server
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
0a1
===================================================================
> foo
Index: file1
RCS file: ${CVSROOT_DIRNAME}/trace/file1,v
S -> CVS_SERVER_SLEEP not set\.
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.1, , , ${tempname})
S -> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.2, , , (function))
S -> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.2, , , ${tempname})
S -> RCS_cmp_file( ${CVSROOT_DIRNAME}/trace/file1,v, 1\.1, 1\.2, , file1 )
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace)
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> diff_file_nodiff (file1, 3)
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> do_cvs_command (diff)
S -> do_recursion ( frame=${PFMT} )
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_simple_remove()
S -> remove_locks()
S -> remove_locks()
S -> serve_directory (\.)
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> server_pathname_check (file1)
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> tag_check_valid ( name=1\.1, argc=1, argv=${PFMT}, local=0,
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
diff -r1\.1 -r1\.2
retrieving revision 1\.1
retrieving revision 1\.2"

	  dotest_sort trace-16 "${testcvs} -t -t -t rdiff -rbp trace/file1" \
"  *aflag=0, repository=${CVSROOT_DIRNAME}/trace )
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=1, repository_in=${CVSROOT_DIRNAME}/trace )
  *local=0, which=6, aflag=0,
  *locktype=1, update_preload=trace
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Lock_Cleanup()
  *-> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.1\.1\.1, bp, , ${tempname})
  *-> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.2, , , ${tempname})
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace)
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> do_module (trace/file1, Patching, NULL, NULL)
  *-> do_recursion ( frame=${PFMT} )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_simple_remove()
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> patch_proc ( (null), (null), (null), 0, 0, trace/file1, Patching )
  *-> remove_locks()
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> tag_check_valid ( name=bp, argc=1, argv=${PFMT}, local=0,
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
\*\*\* 0 \*\*\*\*
\*\*\* trace/file1:1\.1\.1\.1 ${DATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
${PLUS} foo
--- 1 ----
--- trace/file1 ${DATE}
Index: trace/file1
diff -c trace/file1:1\.1\.1\.1 trace/file1:1\.2" \
"
  *aflag=0, repository=${CVSROOT_DIRNAME}/trace )
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=1, repository_in=${CVSROOT_DIRNAME}/trace )
  *local=0, which=6, aflag=0,
  *locktype=1, update_preload=trace
  *-> Forking server: ${CVS_SERVER} server
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
\*\*\* 0 \*\*\*\*
\*\*\* trace/file1:1\.1\.1\.1 ${DATE}
\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
${PLUS} foo
--- 1 ----
--- trace/file1 ${DATE}
Index: trace/file1
S -> CVS_SERVER_SLEEP not set\.
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.1\.1\.1, bp, , ${tempname})
S -> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.2, , , ${tempname})
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace)
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> do_cvs_command (rdiff)
S -> do_module (trace/file1, Patching, NULL, NULL)
S -> do_recursion ( frame=${PFMT} )
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_simple_remove()
S -> patch_proc ( (null), (null), (null), 0, 0, trace/file1, Patching )
S -> remove_locks()
S -> remove_locks()
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> server_pathname_check (file1)
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> tag_check_valid ( name=bp, argc=1, argv=${PFMT}, local=0,
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
diff -c trace/file1:1\.1\.1\.1 trace/file1:1\.2"

	  dotest_sort trace-17 "${testcvs} -t -t -t rm -f file1" \
"  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=1, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *locktype=1, update_preload=(null)
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Lock_Cleanup()
  *-> Reader_Lock(${CVSROOT_DIRNAME}/trace)
  *-> Register(file1, -1\.2, ${DATE}, ,  )
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> do_recursion ( frame=${PFMT} )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_simple_remove()
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> remove_locks()
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> unlink_file(CVS/Entries\.Log)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
${SPROG} remove: scheduling \`file1' for removal
${SPROG} remove: use \`${SPROG} commit' to remove this file permanently" \
"
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *dosrcs=0, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *locktype=0, update_preload=(null)
  *locktype=0, update_preload=(null)
  *locktype=1, update_preload=(null)
  *-> Forking server: ${CVS_SERVER} server
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Register(file1, -1\.2, dummy timestamp, ,  )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> unlink_file(CVS/Entries\.Log)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> CVS_SERVER_SLEEP not set\.
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Reader_Lock(${CVSROOT_DIRNAME}/trace)
S -> Register(file1, -1\.2, , ,  )
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> do_cvs_command (remove)
S -> do_recursion ( frame=${PFMT} )
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_simple_remove()
S -> remove_locks()
S -> remove_locks()
S -> rename(CVS/Entries\.Backup,CVS/Entries)
S -> serve_directory (\.)
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> server_pathname_check (file1)
S -> server_register(file1, -1\.2, , , , , )
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> unlink_file(CVS/Entries\.Log)
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
${SPROG} remove: scheduling \`file1' for removal
${SPROG} remove: use \`${SPROG} commit' to remove this file permanently"

	  dotest_sort trace-18 "${testcvs} -t -t -t ci -mremove file1" \
"  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *locktype=0, update_preload=(null)
  *locktype=0, update_preload=(null)
  *locktype=2, update_preload=(null)
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Lock_Cleanup()
  *-> Lock_Cleanup()
  *-> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/commitinfo, trace, ALL)
  *-> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/loginfo, trace, ALL)
  *-> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/verifymsg, trace, not ALL)
  *-> Promotable_Lock ()
  *-> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, , , , file1)
  *-> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.2, , -ko, ${tempname})
  *-> Scratch_Entry(file1)
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, #cvs.pfl\.${hostname}\.[0-9][0-9]*)
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, #cvs.pfl\.${hostname}\.[0-9][0-9]*)
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.\*, #cvs.rfl\.${hostname}\.[0-9][0-9]*)
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> fopen(${CVSROOT_DIRNAME}/CVSROOT/history,a)
  *-> lock_dir_for_write (${CVSROOT_DIRNAME}/trace)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> lock_tree_promotably (1, argv, 0, 1, 0)
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> promotable_exists (${CVSROOT_DIRNAME}/trace)
  *-> promotable_exists (${CVSROOT_DIRNAME}/trace)
  *-> promotable_lock(${CVSROOT_DIRNAME}/trace)
  *-> rcs_cleanup()
  *-> readers_exist (${CVSROOT_DIRNAME}/trace)
  *-> remove_locks()
  *-> remove_locks()
  *-> rename(${CVSROOT_DIRNAME}/trace/,file1,,${CVSROOT_DIRNAME}/trace/file1,v)
  *-> rename(${CVSROOT_DIRNAME}/trace/,file1,,${CVSROOT_DIRNAME}/trace/file1,v)
  *-> rename(${CVSROOT_DIRNAME}/trace/,file1,,${CVSROOT_DIRNAME}/trace/file1,v)
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 0)
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> unlink_file(${tempname})
  *-> unlink_file(${tempname})
  *-> unlink_file(CVS/Entries\.Log)
  *-> unlink_file(file1)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
${CVSROOT_DIRNAME}/trace/file1,v  <--  file1
new revision: delete; previous revision: 1\.2" \
"
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *callerdat=${PFMT}, argc=1, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *dosrcs=0, repository_in=(null) )
  *dosrcs=0, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *dosrcs=1, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *locktype=0, update_preload=(null)
  *locktype=0, update_preload=(null)
  *locktype=0, update_preload=(null)
  *locktype=0, update_preload=(null)
  *locktype=2, update_preload=(null)
  *-> Forking server: ${CVS_SERVER} server
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Scratch_Entry(file1)
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> rename(CVS/Entries\.Backup,CVS/Entries)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> unlink_file(CVS/Entries\.Log)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
${CVSROOT_DIRNAME}/trace/file1,v  <--  file1
S -> CVS_SERVER_SLEEP not set\.
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Leaving do_recursion ( frame=${PFMT} )
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/commitinfo, trace, ALL)
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/loginfo, trace, ALL)
S -> Parse_Info (${CVSROOT_DIRNAME}/CVSROOT/verifymsg, trace, not ALL)
S -> Promotable_Lock ()
S -> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, , , , file1)
S -> RCS_checkout (${CVSROOT_DIRNAME}/trace/file1,v, 1\.2, , -ko, ${tempname})
S -> Scratch_Entry(file1)
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, #cvs.pfl\.${hostname}\.[0-9][0-9]*)
S -> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, #cvs.pfl\.${hostname}\.[0-9][0-9]*)
S -> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.\*, #cvs.rfl\.${hostname}\.[0-9][0-9]*)
S -> dirswitch (\., ${CVSROOT_DIRNAME}/trace)
S -> do_cvs_command (commit)
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> do_recursion ( frame=${PFMT} )
S -> fopen(${CVSROOT_DIRNAME}/CVSROOT/history,a)
S -> lock_dir_for_write (${CVSROOT_DIRNAME}/trace)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
S -> lock_name (${CVSROOT_DIRNAME}/trace, )
S -> lock_name (${CVSROOT_DIRNAME}/trace, )
S -> lock_name (${CVSROOT_DIRNAME}/trace, )
S -> lock_simple_remove()
S -> lock_simple_remove()
S -> lock_tree_promotably (1, argv, 0, 1, 0)
S -> promotable_exists (${CVSROOT_DIRNAME}/trace)
S -> promotable_exists (${CVSROOT_DIRNAME}/trace)
S -> promotable_lock(${CVSROOT_DIRNAME}/trace)
S -> rcs_cleanup()
S -> readers_exist (${CVSROOT_DIRNAME}/trace)
S -> remove_locks()
S -> remove_locks()
S -> remove_locks()
S -> rename(${CVSROOT_DIRNAME}/trace/,file1,,${CVSROOT_DIRNAME}/trace/file1,v)
S -> rename(${CVSROOT_DIRNAME}/trace/,file1,,${CVSROOT_DIRNAME}/trace/file1,v)
S -> rename(${CVSROOT_DIRNAME}/trace/,file1,,${CVSROOT_DIRNAME}/trace/file1,v)
S -> rename(CVS/Entries\.Backup,CVS/Entries)
S -> serve_directory (\.)
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> server_pathname_check (file1)
S -> server_pathname_check (file1)
S -> server_pathname_check (file1)
S -> set_lock (${CVSROOT_DIRNAME}/trace, 0)
S -> set_lock (${CVSROOT_DIRNAME}/trace, 1)
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> unlink_file(${tempname})
S -> unlink_file(${tempname})
S -> unlink_file(CVS/Entries\.Log)
S -> unlink_file(file1)
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
done
new revision: delete; previous revision: 1\.2"

	  # SGI IRIX seems to have problems with the stdout and stderr
	  # mix for this test, so separate them.
	  dotest_sort trace-19 "${testcvs} -t -t -t history file1 2>stderr19" \
"O ${ISODATE} ${username} trace =trace= ${TESTDIR}/trace/\*" \
"O ${ISODATE} ${username} trace =trace= <remote>/\*"
	  dotest_sort trace-19stderr "sort < stderr19" \
"  *-> Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> remove_locks()
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )" \
"
  *-> Forking server: ${CVS_SERVER} server
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
S -> CVS_SERVER_SLEEP not set\.
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> do_cvs_command (history)
S -> remove_locks()
S -> remove_locks()
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()"
	  rm stderr19

	  cd ..
	  dotest_sort \
trace-20 "echo yes | ${testcvs} -t -t -t release -d trace" \
"  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *dosrcs=0, repository_in=(null) )
  *dosrcs=0, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *locktype=0, update_preload=(null)
  *locktype=0, update_preload=(null)
  *locktype=2, update_preload=(null)
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Lock_Cleanup()
  *-> Lock_Cleanup()
  *-> Promotable_Lock ()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> Simple_Lock_Cleanup()
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.\*, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.\*, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.pfl\.\*, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.pfl\.\*, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
  *-> _lock_exists (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.\*, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> fopen(${CVSROOT_DIRNAME}/CVSROOT/history,a)
  *-> lock_dir_for_write (${CVSROOT_DIRNAME}/trace)
  *-> lock_dir_for_write (${CVSROOT_DIRNAME}/trace/subdir)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.lock)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.pfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.rfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, #cvs\.wfl\.${hostname}\.[0-9][0-9]*)
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, )
  *-> lock_name (${CVSROOT_DIRNAME}/trace/subdir, )
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> lock_simple_remove()
  *-> lock_tree_promotably (0, argv, 0, 1, 0)
  *-> main loop with CVSROOT=${CVSROOT_DIRNAME}
  *-> parse_cvsroot ( ${CVSROOT_DIRNAME} )
  *-> promotable_exists (${CVSROOT_DIRNAME}/trace)
  *-> promotable_exists (${CVSROOT_DIRNAME}/trace)
  *-> promotable_exists (${CVSROOT_DIRNAME}/trace/subdir)
  *-> promotable_exists (${CVSROOT_DIRNAME}/trace/subdir)
  *-> promotable_lock(${CVSROOT_DIRNAME}/trace)
  *-> promotable_lock(${CVSROOT_DIRNAME}/trace/subdir)
  *-> readers_exist (${CVSROOT_DIRNAME}/trace)
  *-> readers_exist (${CVSROOT_DIRNAME}/trace/subdir)
  *-> remove_locks()
  *-> remove_locks()
  *-> run_popen(${testcvs} -n -q -d ${CVSROOT_DIRNAME} update,r)
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 0)
  *-> set_lock (${CVSROOT_DIRNAME}/trace, 1)
  *-> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 0)
  *-> set_lock (${CVSROOT_DIRNAME}/trace/subdir, 1)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> unlink_file_dir(trace)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
Are you sure you want to release (and delete) directory \`trace':   *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
You have \[0\] altered files in this repository\." \
"
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *callerdat=${PFMT}, argc=0, argv=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *direntproc=${PFMT}, dirleavproc=${PFMT},
  *dosrcs=0, repository_in=(null) )
  *dosrcs=0, repository_in=(null) )
  *local=0, which=1, aflag=0,
  *local=0, which=1, aflag=0,
  *locktype=0, update_preload=(null)
  *locktype=0, update_preload=(null)
  *-> Forking server: ${CVS_SERVER} server
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> Leaving do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> do_recursion ( frame=${PFMT} )
  *-> main loop with CVSROOT=${CVSROOT}
  *-> parse_cvsroot ( ${CVSROOT} )
  *-> run_popen(${testcvs} -n -q -d ${CVSROOT} update,r)
  *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
  *-> unlink_file_dir(trace)
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
  *-> walklist ( list=${PFMT}, proc=${PFMT}, closure=${PFMT} )
Are you sure you want to release (and delete) directory \`trace':   *-> start_recursion ( fileproc=${PFMT}, filesdoneproc=${PFMT},
S -> CVS_SERVER_SLEEP not set\.
S -> Lock_Cleanup()
S -> Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> Simple_Lock_Cleanup()
S -> do_cvs_command (release)
S -> fopen(${CVSROOT_DIRNAME}/CVSROOT/history,a)
S -> remove_locks()
S -> remove_locks()
S -> server_cleanup()
S -> server_cleanup()
S -> server_notify()
S -> server_notify()
S -> server_notify()
You have \[0\] altered files in this repository\."

	  dokeep
	  cd ..
	  rm -fr trace
	  modify_repo rm -fr $CVSROOT_DIRNAME/trace 
	  ;;



	*)
	   echo $what is not the name of a test -- ignored
	   ;;
	esac

    # Sanity check sanity.sh.  :)
    #
    # Test our exit directory so that tests that exit in an incorrect directory
    # are noticed during single test runs.
    #
    # FIXME?
    # Sparc Solaris 9 is dereferencing paths here as if /bin/pwd were
    # called when /tmp is a symlink.  This might be a new problem with this
    # test, but since this was recently tested I think it more likely to be
    # A Solaris issue.
    if test "x$TESTDIR" != "x`pwd`"; then
	    fail "cleanup: PWD != TESTDIR (\``pwd`' != \`$TESTDIR')"
    fi

    # Test that the last test didn't overwrite any write proxy configuration
    # which may be in place.
    if $proxy; then
	problem=false
	for file in \
	            $SECONDARY_CVSROOT_DIRNAME/CVSROOT/config \
	            $CVSROOT_DIRNAME/CVSROOT/config \
		    $SECONDARY_CVSROOT_DIRNAME/CVSROOT/loginfo \
	            $CVSROOT_DIRNAME/CVSROOT/loginfo \
	            $SECONDARY_CVSROOT_DIRNAME/CVSROOT/postadmin \
	            $CVSROOT_DIRNAME/CVSROOT/postadmin \
	            $SECONDARY_CVSROOT_DIRNAME/CVSROOT/posttag \
	            $CVSROOT_DIRNAME/CVSROOT/posttag \
	            $SECONDARY_CVSROOT_DIRNAME/CVSROOT/postwatch \
	            $CVSROOT_DIRNAME/CVSROOT/postwatch; do
	    if cmp $file $TESTDIR/`basename $file`-clean >/dev/null 2>&1; then
		:;
	    else
		echo "\`$file' and \`$TESTDIR/`basename $file`-clean' differ." \
		     >>$LOGFILE
		problem=:
	    fi
	done
	if $problem; then
	    fail "cleanup: write proxy configuration not preserved"
	fi
    fi

    if $remote && test "$servercvs_orig" != "$servercvs" >/dev/null 2>&1; then
	fail "test slagged \$servercvs"
    fi

    # Reset val-tags to a pristine state.
    if test -s $CVSROOT_DIRNAME/CVSROOT/val-tags; then
       modify_repo ":" > $CVSROOT_DIRNAME/CVSROOT/val-tags
    fi
    verify_tmp_empty "post $what"

done # The big loop

# Set up summary data for output.
skippedoutput=
warningsoutput=
extendedinfo=
if test $skipped -ne 0; then
  skippedoutput="$skipped test group"
  if test $skipped -ne 1; then
    skippedoutput="${skippedoutput}s"
  fi
  skippedoutput="$skippedoutput skipped"
fi
if test $warnings -ne 0; then
  warningsoutput="$warnings test"
  if test $warnings -ne 1; then
    warningsoutput="${warningsoutput}s"
  fi
  warningsoutput="$warningsoutput passed with warnings"
fi
if test -n "$skippedoutput" || test -n "$warningsoutput"; then
  extendedinfo=" ("
  if test -n "$skippedoutput"; then
    extendedinfo="$extendedinfo$skippedoutput"
  fi
  if test -n "$skippedoutput" && test -n "$warningsoutput"; then
    extendedinfo="$extendedinfo and "
  fi
  if test -n "$warningsoutput"; then
    extendedinfo="$extendedinfo$warningsoutput"
  fi
  extendedinfo="$extendedinfo)"
fi

echo "OK, all $passed tests passed$extendedinfo."

# TODO:
# * Test `cvs update -d foo' (where foo does not exist).
# * Test `cvs update foo bar' (where foo and bar are both from the
#   same directory in the repository).  Suppose one is a branch--make
#   sure that both directories get updated with the respective correct
#   thing.
# * `cvs update ../foo'.  Also ../../foo ./../foo foo/../../bar /foo/bar
#   foo/.././../bar foo/../bar etc.
# * Test all flags in modules file.
#   Test that ciprog gets run both on checkin in that directory, or a
#     higher-level checkin which recurses into it.
# * Test operations on a directory that contains other directories but has
#   no files of its own.
# * -t global option
# * cvs rm followed by cvs add or vice versa (with no checkin in between).
# * cvs rm twice (should be a nice error message).
# * -P option to checkout--(a) refrains from checking out new empty dirs,
#   (b) prunes empty dirs already there.
# * Test that cvs -d `hostname`:${TESTDIR}/non/existent co foo
#   gives an appropriate error (e.g.
#     Cannot access ${TESTDIR}/non-existent/CVSROOT
#     No such file or directory).
#   (like basica-9, but for remote).
# * Test ability to send notifications in response to watches.  (currently
#   hard to test because CVS doesn't send notifications if username is the
#   same).
# * Test the contents of adm files other than Root and Repository.
#   Entries seems the next most important thing.
# * Test the following compatibility issues:
#   - The filler fields in "D" entries in CVS/Entries get preserved
#     (per cvs.texinfo).
#   - Unrecognized entry types in CVS/Entries get ignored (looks like
#     this needs to be documented in cvs.texinfo, but is not)
#   - Test that unrecognized files in CVS directories (e.g. CVS/Foobar)
#     are ignored (per cvs.texinfo).
#   - Test 'cvs history' with symlinks in the path to the working directory.
#   - Remove most of the CVS_SERVER stuff after a reasonable amount of time.
#     The "fork" & "client" series of tests should be left.  4/2/00, CVS
#     1.11.0.1 was altered so that it would default to program_name (set from
#     argv[0]) rather than "cvs", but I'd like this script to work on legacy
#     versions of CVS for awhile.
#   - Testsuite doesn't work with usernames over eight characters in length.
#     Fix it.
# End of TODO list.

# Exit if keep set
dokeep

# Remove the test directory, but first change out of it.
if $TIMING; then
    echo "exiting without removing test dir in order to preserve timing information."
else
    cd `dirname $TESTDIR`
    rm -rf $TESTDIR
fi

# end of sanity.sh