| /src/sys/arch/i386/i386/ |
| cpu_in_cksum.S | 110 #define ADC(n) \
202 ADC(4)
212 ADC(0)
213 ADC(4)
214 ADC(8)
215 ADC(28)
216 ADC(16)
217 ADC(20)
218 ADC(24)
219 ADC(44
[all...] |
| /src/sys/external/gpl2/dts/dist/arch/arm/boot/dts/ |
| r8a7745-iwg22d-sodimm.dts | 189 /* 3.25 MHz ADC clock speed */
190 st,adc-freq = <1>;
191 /* ADC conversion time: 80 clocks */
193 /* 12-bit ADC */
195 /* internal ADC reference */
|
| at91-sama5d27_wlsom1_ek.dts | 68 &adc {
105 * There is no real pinmux for ADC, if the pin
108 * Requesting pins for ADC is GPIO is
111 * state when the pin is not muxed to the adc.
|
| at91-sama5d4ek.dts | 35 adc0: adc@fc034000 {
46 atmel,adc-vref = <3300>;
47 /*atmel,adc-ts-wires = <4>;*/ /* Set up ADC touch screen */
48 status = "okay"; /* Enable ADC IIO support */
|
| exynos4412-odroidu3.dts | 55 &adc {
57 /* Nothing connected to ADC inputs, keep it disabled */
|
| imx6qdl-apalis.dtsi | 307 /* 3.25 MHz ADC clock speed */
308 st,adc-freq = <1>;
309 /* 12-bit ADC */
311 /* internal ADC reference */
313 /* ADC converstion time: 80 clocks */
334 compatible = "st,stmpe-adc";
335 /* forbid to use ADC channels 3-0 (touch) */
|
| imx6qdl-colibri.dtsi | 252 /* 3.25 MHz ADC clock speed */
253 st,adc-freq = <1>;
254 /* 12-bit ADC */
256 /* internal ADC reference */
258 /* ADC converstion time: 80 clocks */
279 compatible = "st,stmpe-adc";
280 /* forbid to use ADC channels 3-0 (touch) */
|
| qcom-msm8660.dtsi | 73 * These channels from the ADC are simply hardware monitors.
74 * That is why the ADC is referred to as "HKADC" - HouseKeeping
75 * ADC.
346 compatible = "qcom,pm8058-adc";
353 vcoin: adc-channel@0 {
356 vbat: adc-channel@1 {
359 dcin: adc-channel@2 {
362 ichg: adc-channel@3 {
365 vph_pwr: adc-channel@4 {
368 usb_vbus: adc-channel@a
[all...] |
| am5729-beagleboneai.dts | 422 st,mod-12b = <1>; /* 12-bit ADC */
423 st,ref-sel = <0>; /* internal ADC reference */
424 st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */
425 st,sample-time = <4>; /* ADC converstion time: 80 clocks */
428 compatible = "st,stmpe-adc";
|
| at91-vinco.dts | 37 adc0: adc@fc034000 {
38 status = "okay"; /* Enable ADC IIO support */
|
| rk3066a-bqcurie2.dts | 66 /* VOL+ comes somehow thru the ADC */
|
| tegra30-apalis-v1.1.dtsi | 998 /* 3.25 MHz ADC clock speed */
999 st,adc-freq = <1>;
1000 /* 12-bit ADC */
1002 /* internal ADC reference */
1004 /* ADC converstion time: 80 clocks */
1025 compatible = "st,stmpe-adc";
1026 /* forbid to use ADC channels 3-0 (touch) */
|
| tegra30-apalis.dtsi | 981 /* 3.25 MHz ADC clock speed */
982 st,adc-freq = <1>;
983 /* 12-bit ADC */
985 /* internal ADC reference */
987 /* ADC converstion time: 80 clocks */
1008 compatible = "st,stmpe-adc";
1009 /* forbid to use ADC channels 3-0 (touch) */
|
| tegra30-colibri.dtsi | 850 /* 3.25 MHz ADC clock speed */
851 st,adc-freq = <1>;
852 /* 12-bit ADC */
854 /* internal ADC reference */
856 /* ADC converstion time: 80 clocks */
858 /* forbid to use ADC channels 3-0 (touch) */
878 compatible = "st,stmpe-adc";
|
| ls1021a-tsn.dts | 186 * - TI ADS7924 4-channel ADC at 0x49
|
| ste-ab8505.dtsi | 280 // supply for gpadc; ADC LDO
|
| /src/sys/external/gpl2/dts/dist/arch/arm64/boot/dts/allwinner/ |
| sun50i-a64-sopine-baseboard.dts | 166 "ADCL", "Left ADC",
167 "ADCR", "Right ADC",
|
| sun50i-a64-pine64.dts | 267 "ADCL", "Left ADC",
268 "ADCR", "Right ADC",
|
| sun50i-a64-bananapi-m64.dts | 336 "ADCL", "Left ADC",
337 "ADCR", "Right ADC",
|
| sun50i-a64-orangepi-win.dts | 335 "ADCL", "Left ADC",
336 "ADCR", "Right ADC",
|
| sun50i-a64-pinebook.dts | 381 "ADCL", "Left ADC",
382 "ADCR", "Right ADC",
|
| sun50i-a64-pinephone.dtsi | 452 "ADCL", "Left ADC",
453 "ADCR", "Right ADC",
|
| sun50i-a64-pinetab.dts | 428 "ADCL", "Left ADC",
429 "ADCR", "Right ADC",
|
| sun50i-a64-teres-i.dts | 345 "ADCL", "Left ADC",
346 "ADCR", "Right ADC",
|
| /src/sys/external/gpl2/dts/dist/arch/arm64/boot/dts/qcom/ |
| sc7180-trogdor-lazor.dtsi | 26 * not supported by the PM6150 ADC driver. Disable the charger thermal zone
|
