Home | History | Annotate | Line # | Download | only in include
      1 /*	$NetBSD: ctlreg.h,v 1.32 2024/03/10 17:34:46 rillig Exp $ */
      2 
      3 /*
      4  * Copyright (c) 1996
      5  *	The President and Fellows of Harvard College. All rights reserved.
      6  * Copyright (c) 1992, 1993
      7  *	The Regents of the University of California.  All rights reserved.
      8  *
      9  * This software was developed by the Computer Systems Engineering group
     10  * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
     11  * contributed to Berkeley.
     12  *
     13  * All advertising materials mentioning features or use of this software
     14  * must display the following acknowledgement:
     15  *	This product includes software developed by Harvard University.
     16  *	This product includes software developed by the University of
     17  *	California, Lawrence Berkeley Laboratory.
     18  *
     19  * Redistribution and use in source and binary forms, with or without
     20  * modification, are permitted provided that the following conditions
     21  * are met:
     22  * 1. Redistributions of source code must retain the above copyright
     23  *    notice, this list of conditions and the following disclaimer.
     24  * 2. Redistributions in binary form must reproduce the above copyright
     25  *    notice, this list of conditions and the following disclaimer in the
     26  *    documentation and/or other materials provided with the distribution.
     27  * 3. All advertising materials mentioning features or use of this software
     28  *    must display the following acknowledgement:
     29  *	This product includes software developed by the University of
     30  *	California, Berkeley and its contributors.
     31  * 4. Neither the name of the University nor the names of its contributors
     32  *    may be used to endorse or promote products derived from this software
     33  *    without specific prior written permission.
     34  *
     35  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     36  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     37  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     38  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     39  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     40  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     41  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     42  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     43  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     44  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     45  * SUCH DAMAGE.
     46  *
     47  *	@(#)ctlreg.h	8.1 (Berkeley) 6/11/93
     48  */
     49 
     50 /*
     51  * Sun4m support by Aaron Brown, Harvard University.
     52  * Changes Copyright (c) 1995 The President and Fellows of Harvard College.
     53  * All rights reserved.
     54  */
     55 
     56 /*
     57  * Sun 4, 4c, and 4m control registers. (includes address space definitions
     58  * and some registers in control space).
     59  */
     60 
     61 /*
     62  * The Alternate address spaces.
     63  */
     64 
     65 /*			0x00	   unused */
     66 /*			0x01	   unused */
     67 #define	ASI_CONTROL	0x02	/* cache enable, context reg, etc */
     68 #define	ASI_SEGMAP	0x03	/* [4/4c] segment maps */
     69 #define ASI_SRMMUFP	0x03	/* [4m] ref mmu flush/probe */
     70 #define	ASI_PTE		0x04	/* [4/4c] PTE space (pmegs) */
     71 #define ASI_SRMMU	0x04	/* [4m] ref mmu registers */
     72 #define	ASI_REGMAP	0x06	/* [4/3-level MMU ] region maps */
     73 #define	ASI_HWFLUSHSEG	0x05	/* [4/4c] hardware assisted version of FLUSHSEG */
     74 #define	ASI_HWFLUSHPG	0x06	/* [4/4c] hardware assisted version of FLUSHPG */
     75 #define ASI_SRMMUDIAG	0x06	/* [4m] */
     76 #define	ASI_HWFLUSHCTX	0x07	/* [4/4c] hardware assisted version of FLUSHCTX */
     77 
     78 #define	ASI_USERI	0x08	/* I-space (user) */
     79 #define	ASI_KERNELI	0x09	/* I-space (kernel) */
     80 #define	ASI_USERD	0x0a	/* D-space (user) */
     81 #define	ASI_KERNELD	0x0b	/* D-space (kernel) */
     82 
     83 #define	ASI_FLUSHREG	0x7	/* [4/4c] flush cache by region */
     84 #define	ASI_FLUSHSEG	0x0c	/* [4/4c] flush cache by segment */
     85 #define	ASI_FLUSHPG	0x0d	/* [4/4c] flush cache by page */
     86 #define	ASI_FLUSHCTX	0x0e	/* [4/4c] flush cache by context */
     87 
     88 #define	ASI_DCACHE	0x0f	/* [4] flush data cache */
     89 
     90 #define ASI_ICACHETAG	0x0c	/* [4m] instruction cache tag */
     91 #define ASI_ICACHEDATA	0x0d	/* [4m] instruction cache data */
     92 #define ASI_DCACHETAG	0x0e	/* [4m] data cache tag */
     93 #define ASI_DCACHEDATA	0x0f	/* [4m] data cache data */
     94 #define ASI_IDCACHELFP	0x10	/* [4m] flush i&d cache line (page) */
     95 #define ASI_IDCACHELFS	0x11	/* [4m] flush i&d cache line (seg) */
     96 #define ASI_IDCACHELFR	0x12	/* [4m] flush i&d cache line (reg) */
     97 #define ASI_IDCACHELFC	0x13	/* [4m] flush i&d cache line (ctxt) */
     98 #define ASI_IDCACHELFU	0x14	/* [4m] flush i&d cache line (user) */
     99 #define ASI_BLOCKCOPY	0x17	/* [4m] hypersparc: hardware block copy */
    100 #define ASI_BLOCKFILL	0x1f	/* [4m] hypersparc: hardware block fill */
    101 #define ASI_BYPASS	0x20	/* [4m] sun ref mmu bypass,
    102 				        ie. direct phys access */
    103 #define	ASI_CSR		0x2f	/* [4d] CPU-unit CSR space */
    104 #define	ASI_ECSR	0x2f	/* [4d] CPU-unit ECSR space */
    105 #define ASI_HICACHECLR	0x31	/* [4m] hypersparc only: I-cache flash clear */
    106 #define ASI_ICACHECLR	0x36	/* [4m] ms1 only: I-cache flash clear */
    107 #define ASI_DCACHECLR	0x37	/* [4m] ms1 only: D-cache flash clear */
    108 #define ASI_DCACHEDIAG	0x39	/* [4m] data cache diagnostic register access */
    109 
    110 /*
    111  * [4/4c] Registers in the control space (ASI_CONTROL).
    112  */
    113 #define	AC_IDPROM	0x00000000	/* [4] ID PROM */
    114 #define	AC_CONTEXT	0x30000000	/* [4/4c] context register (byte) */
    115 #define	AC_SYSENABLE	0x40000000	/* [4/4c] system enable register (byte) */
    116 #define	AC_DVMA_ENABLE	0x50000000	/* [4] enable user dvma */
    117 #define	AC_BUS_ERR	0x60000000	/* [4] bus error register */
    118 #define	AC_SYNC_ERR	0x60000000	/* [4c] sync (memory) error reg */
    119 #define	AC_SYNC_VA	0x60000004	/* [4c] sync error virtual addr */
    120 #define	AC_ASYNC_ERR	0x60000008	/* [4c] async error reg */
    121 #define	AC_ASYNC_VA	0x6000000c	/* [4c] async error virtual addr */
    122 #define	AC_DIAG_REG	0x70000000	/* [4] diagnostic reg */
    123 #define	AC_CACHETAGS	0x80000000	/* [4/4c?] cache tag base address */
    124 #define	AC_CACHEDATA	0x90000000	/* [4] cached data [sun4/400?] */
    125 #define	AC_DVMA_MAP	0xd0000000	/* [4] user dvma map entries */
    126 #define AC_VMEINTVEC	0xe0000000	/* [4] vme interrupt vector */
    127 #define	AC_SERIAL	0xf0000000	/* [4/4c] special serial port sneakiness */
    128 	/* AC_SERIAL is not used in the kernel (it is for the PROM) */
    129 
    130 /* XXX: does not belong here */
    131 #define	ME_REG_IERR	0x80		/* memory err ctrl reg error intr pending bit */
    132 
    133 /*
    134  * [4/4c]
    135  * Bits in sync error register.  Reading the register clears these;
    136  * otherwise they accumulate.  The error(s) occurred at the virtual
    137  * address stored in the sync error address register, and may have
    138  * been due to, e.g., what would usually be called a page fault.
    139  * Worse, the bits accumulate during instruction prefetch, so
    140  * various bits can be on that should be off.
    141  */
    142 #define	SER_WRITE	0x8000		/* error occurred during write */
    143 #define	SER_INVAL	0x80		/* PTE had PG_V off */
    144 #define	SER_PROT	0x40		/* operation violated PTE prot */
    145 #define	SER_TIMEOUT	0x20		/* bus timeout (non-existent mem) */
    146 #define	SER_SBUSERR	0x10		/* S-Bus bus error */
    147 #define	SER_MEMERR	0x08		/* memory ecc/parity error */
    148 #define	SER_SZERR	0x02		/* [4/vme] size error (r/w too large) */
    149 #define	SER_WATCHDOG	0x01		/* watchdog reset (never see this) */
    150 
    151 #define	SER_BITS \
    152 "\20\20WRITE\10INVAL\7PROT\6TIMEOUT\5SBUSERR\4MEMERR\2SZERR\1WATCHDOG"
    153 
    154 /*
    155  * [4/4c]
    156  * Bits in async error register (errors from DVMA or Sun-4 cache
    157  * writeback).  The corresponding bit is also set in the sync error reg.
    158  *
    159  * A writeback invalid error means there is a bug in the PTE manager.
    160  *
    161  * The word is that the async error register does not work right.
    162  */
    163 #define	AER_WBINVAL	0x80		/* writeback found PTE without PG_V */
    164 #define	AER_TIMEOUT	0x20		/* bus timeout */
    165 #define	AER_DVMAERR	0x10		/* bus error during DVMA */
    166 
    167 #define	AER_BITS	"\20\10WBINVAL\6TIMEOUT\5DVMAERR"
    168 
    169 /*
    170  * [4/4c] Bits in system enable register.
    171  */
    172 #define	SYSEN_DVMA	0x20		/* Enable dvma */
    173 #define	SYSEN_CACHE	0x10		/* Enable cache */
    174 #define	SYSEN_IOCACHE	0x40		/* Enable IO cache */
    175 #define	SYSEN_VIDEO	0x08		/* Enable on-board video */
    176 #define	SYSEN_RESET	0x04		/* Reset the hardware */
    177 #define	SYSEN_RESETVME	0x02		/* Reset the VME bus */
    178 
    179 
    180 /*
    181  * [4m] Bits in ASI_CONTROL space, sun4m only.
    182  */
    183 #define MXCC_STREAM_DATA	0x1c00000	/* Stream data register */
    184 #define MXCC_STREAM_SRC		0x1c00100	/* Stream source register */
    185 #define MXCC_STREAM_DST		0x1c00200	/* Stream dest register */
    186 #define MXCC_BIST		0x1c00800	/* Builtin self test register */
    187 #define MXCC_CTRLREG		0x1c00a00	/* Control register for MXCC */
    188 #define MXCC_STATREG		0x1c00b00	/* Status register for MXCC */
    189 #define MXCC_MRST		0x1c00c00	/* Module reset register */
    190 #define MXCC_ERROR		0x1c00e00	/* Error register */
    191 #define MXCC_MBUSPORT		0x1c00f00	/* MBus port register */
    192 
    193 /* Bits in MXCC_CTRLREG */
    194 #define MXCC_CTRLREG_HC		0x1	/* Half cache (Xbus only) */
    195 #define MXCC_CTRLREG_CS		0x2	/* E-cache size (Xbus only) */
    196 #define MXCC_CTRLREG_CE		0x4	/* Enable e-cache */
    197 #define MXCC_CTRLREG_PE		0x8	/* Parity enable */
    198 #define MXCC_CTRLREG_MC		0x10	/* Multiple command enable */
    199 #define MXCC_CTRLREG_PF		0x20	/* Prefetch enable */
    200 #define MXCC_CTRLREG_WI		0x40	/* Write invalidate (Xbus only) */
    201 #define MXCC_CTRLREG_BWC_MASK	0x180	/* Bus watch count (Xbus only) */
    202 #define MXCC_CTRLREG_RC		0x200	/* Read reference count */
    203 
    204 /* Bits in MXCC_MRST */
    205 #define MXCC_MRST_SI		0x00000002	/* Software Internal reset */
    206 #define MXCC_MRST_WD		0x00000004	/* Watchdog reset */
    207 
    208 /*
    209  * Stream register usage:
    210  *	To fill a block with some value, load that value into the 64 byte
    211  *	stream data register (using double-word access; on Mbus only the
    212  *	lower 32 bytes are used), then write the physical address of
    213  *	the destination into the stream destination register.
    214  *
    215  *	To copy a block, write the physical address of the source into
    216  *	the stream source register causing the block to be transferred
    217  *	into the stream data register, then write the physical address of
    218  *	the destination into the stream destination register.
    219  *
    220  *	In both cases, or in the MXCC_STREAM_CE bit to make the transactions
    221  *	cache-coherent. Note that stream operations do not cause cache
    222  *	lines to be allocated.
    223  */
    224 #define MXCC_STREAM_BLKSZ	32		/* Unit for stream ops */
    225 #define MXCC_STREAM_C		0x1000000000ULL	/* Cacheable bit for stream ops */
    226 
    227 /*
    228  * Bits in ASI_SRMMUFP space.
    229  *	Bits 8-11 determine the type of flush/probe.
    230  *	Address bits 12-31 hold the page frame.
    231  */
    232 #define ASI_SRMMUFP_L3	(0<<8)	/* probe L3	| flush L3 PTE */
    233 #define ASI_SRMMUFP_L2	(1<<8)	/* probe L2	| flush L2/L3 PTE/PTD's */
    234 #define ASI_SRMMUFP_L1	(2<<8)	/* probe L1	| flush L1/L2/L3 PTE/PTD's*/
    235 #define ASI_SRMMUFP_L0	(3<<8)	/* probe L0	| flush L0/L1/L2/L3 PTE/PTD's */
    236 #define ASI_SRMMUFP_LN	(4<<8)	/* probe all	| flush all levels */
    237 
    238 /*
    239  * [4m] Registers and bits in the SPARC Reference MMU (ASI_SRMMU).
    240  */
    241 #define SRMMU_PCR	0x00000000	/* Processor control register */
    242 #define SRMMU_CXTPTR	0x00000100	/* Context table pointer register */
    243 #define SRMMU_CXR	0x00000200	/* Context register */
    244 #define SRMMU_SFSR	0x00000300	/* Synchronous fault status reg */
    245 #define SRMMU_SFAR	0x00000400	/* Synchronous fault address reg */
    246 #define SRMMU_AFSR	0x00000500	/* Asynchronous fault status reg (HS) */
    247 #define SRMMU_AFAR	0x00000600	/* Asynchronous fault address reg (HS)*/
    248 #define SRMMU_PCFG	0x00000600	/* Processor configuration reg (TURBO)*/
    249 #define SRMMU_RST	0x00000700	/* Reset reg */
    250 #define SRMMU_TLBCTRL	0x00001000	/* TLB replacement control reg */
    251 
    252 
    253 /*
    254  * [4m] Bits in SRMMU control register. One set per module.
    255  */
    256 
    257 /* Bits 0 and 1 are common between implementations */
    258 #define SRMMU_PCR_ME	0x00000001	/* MMU Enable */
    259 #define SRMMU_PCR_NF	0x00000002	/* Fault inhibit bit */
    260 
    261 #define VIKING_PCR_ME	SRMMU_PCR_ME	/* MMU Enable */
    262 #define VIKING_PCR_NF	SRMMU_PCR_NF	/* Fault inhibit bit */
    263 #define VIKING_PCR_PSO	0x00000080	/* Partial Store Ordering enable */
    264 #define VIKING_PCR_DCE	0x00000100	/* Data cache enable bit */
    265 #define VIKING_PCR_ICE	0x00000200	/* SuperSPARC instr. cache enable */
    266 #define VIKING_PCR_SB	0x00000400	/* Store buffer enable bit */
    267 #define VIKING_PCR_MB	0x00000800	/* MBus mode: 0=MXCC, 1=no MXCC */
    268 #define VIKING_PCR_PE	0x00001000	/* Enable memory parity checking */
    269 #define VIKING_PCR_BM	0x00002000	/* 1 iff booting */
    270 #define VIKING_PCR_SE	0x00004000	/* Coherent bus snoop enable */
    271 #define VIKING_PCR_AC	0x00008000	/* 1=cache non-MMU accesses */
    272 #define	VIKING_PCR_TC	0x00010000	/* 1=cache table walks */
    273 
    274 #define HYPERSPARC_PCR_ME	SRMMU_PCR_ME	/* MMU Enable */
    275 #define HYPERSPARC_PCR_NF	SRMMU_PCR_NF	/* Fault inhibit bit */
    276 #define HYPERSPARC_PCR_CE	0x00000100	/* Cache enable bit */
    277 #define HYPERSPARC_PCR_CM	0x00000400	/* Cache mode: 1=write-back */
    278 #define	HYPERSPARC_PCR_MR	0x00000800	/* Memory reflection: 1 = on */
    279 #define HYPERSPARC_PCR_CS	0x00001000	/* cache size: 1=256k, 0=128k */
    280 #define HYPERSPARC_PCR_C	0x00002000	/* enable cache when MMU off */
    281 #define HYPERSPARC_PCR_BM	0x00004000	/* 1 iff booting */
    282 #define HYPERSPARC_PCR_MID	0x00078000	/* MBus module ID MID<3:0> */
    283 #define HYPERSPARC_PCR_WBE	0x00080000	/* Write buffer enable */
    284 #define HYPERSPARC_PCR_SE	0x00100000	/* Coherent bus snoop enable */
    285 #define HYPERSPARC_PCR_CWR	0x00200000	/* Cache wrap enable */
    286 
    287 #define CYPRESS_PCR_ME	SRMMU_PCR_ME	/* MMU Enable */
    288 #define CYPRESS_PCR_NF	SRMMU_PCR_NF	/* Fault inhibit bit */
    289 #define CYPRESS_PCR_CE	0x00000100	/* Cache enable bit */
    290 #define CYPRESS_PCR_CL	0x00000200	/* Cache Lock (604 only) */
    291 #define CYPRESS_PCR_CM	0x00000400	/* Cache mode: 1=write-back */
    292 #define	CYPRESS_PCR_MR	0x00000800	/* Memory reflection: 1=on (605 only) */
    293 #define CYPRESS_PCR_C	0x00002000	/* enable cache when MMU off */
    294 #define CYPRESS_PCR_BM	0x00004000	/* 1 iff booting */
    295 #define CYPRESS_PCR_MID	0x00078000	/* MBus module ID MID<3:0> (605 only) */
    296 #define CYPRESS_PCR_MV	0x00080000	/* Multichip Valid */
    297 #define CYPRESS_PCR_MCM	0x00300000	/* Multichip Mask */
    298 #define CYPRESS_PCR_MCA	0x00c00000	/* Multichip Address */
    299 
    300 #define MS1_PCR_ME	SRMMU_PCR_ME	/* MMU Enable */
    301 #define MS1_PCR_NF	SRMMU_PCR_NF	/* Fault inhibit bit */
    302 #define MS1_PCR_DCE	0x00000100	/* Data cache enable */
    303 #define MS1_PCR_ICE	0x00000200	/* Instruction cache enable */
    304 #define MS1_PCR_RC	0x00000c00	/* DRAM Refresh control */
    305 #define MS1_PCR_PE	0x00001000	/* Enable memory parity checking */
    306 #define MS1_PCR_BM	0x00004000	/* 1 iff booting */
    307 #define MS1_PCR_AC	0x00008000	/* 1=cache if ME==0 (and [ID]CE on) */
    308 #define	MS1_PCR_ID	0x00010000	/* 1=disable ITBR */
    309 #define	MS1_PCR_PC	0x00020000	/* Parity control: 0=even,1=odd */
    310 #define	MS1_PCR_MV	0x00100000	/* Memory data View (diag) */
    311 #define	MS1_PCR_DV	0x00200000	/* Data View (diag) */
    312 #define	MS1_PCR_AV	0x00400000	/* Address View (diag) */
    313 #define	MS1_PCR_STW	0x00800000	/* Software Tablewalk enable */
    314 
    315 #define SWIFT_PCR_ME	SRMMU_PCR_ME	/* MMU Enable */
    316 #define SWIFT_PCR_NF	SRMMU_PCR_NF	/* Fault inhibit bit */
    317 #define SWIFT_PCR_SA	0x00000080	/* Store Allocate */
    318 #define SWIFT_PCR_DCE	0x00000100	/* Data cache enable */
    319 #define SWIFT_PCR_ICE	0x00000200	/* Instruction cache enable */
    320 #define SWIFT_PCR_RC	0x00003c00	/* DRAM Refresh control */
    321 #define SWIFT_PCR_BM	0x00004000	/* 1 iff booting */
    322 #define SWIFT_PCR_AC	0x00008000	/* 1=cache if ME=0 (and [ID]CE on) */
    323 #define	SWIFT_PCR_PA	0x00010000	/* TCX/SX control */
    324 #define	SWIFT_PCR_PC	0x00020000	/* Parity control: 0=even,1=odd */
    325 #define SWIFT_PCR_PE	0x00040000	/* Enable memory parity checking */
    326 #define	SWIFT_PCR_PMC	0x00180000	/* Page mode control */
    327 #define	SWIFT_PCR_BF	0x00200000	/* Branch Folding */
    328 #define	SWIFT_PCR_WP	0x00400000	/* Watch point enable */
    329 #define	SWIFT_PCR_STW	0x00800000	/* Software Tablewalk enable */
    330 
    331 #define TURBOSPARC_PCR_ME	SRMMU_PCR_ME	/* MMU Enable */
    332 #define TURBOSPARC_PCR_NF	SRMMU_PCR_NF	/* Fault inhibit bit */
    333 #define TURBOSPARC_PCR_ICS	0x00000004	/* I-cache snoop enable */
    334 #define TURBOSPARC_PCR_PSO	0x00000008	/* Partial Store order (ro!) */
    335 #define TURBOSPARC_PCR_DCE	0x00000100	/* Data cache enable */
    336 #define TURBOSPARC_PCR_ICE	0x00000200	/* Instruction cache enable */
    337 #define TURBOSPARC_PCR_RC	0x00003c00	/* DRAM Refresh control */
    338 #define TURBOSPARC_PCR_BM	0x00004000	/* 1 iff booting */
    339 #define	TURBOSPARC_PCR_PC	0x00020000	/* Parity ctrl: 0=even,1=odd */
    340 #define TURBOSPARC_PCR_PE	0x00040000	/* Enable parity checking */
    341 #define	TURBOSPARC_PCR_PMC	0x00180000	/* Page mode control */
    342 
    343 /* The Turbosparc's Processor Configuration Register */
    344 #define	TURBOSPARC_PCFG_SCC	0x00000007	/* e-cache config */
    345 #define	TURBOSPARC_PCFG_SE	0x00000008	/* e-cache enable */
    346 #define	TURBOSPARC_PCFG_US2	0x00000010	/* microsparc II compat */
    347 #define	TURBOSPARC_PCFG_WT	0x00000020	/* write-through enable */
    348 #define	TURBOSPARC_PCFG_SBC	0x000000c0	/* SBus Clock */
    349 #define	TURBOSPARC_PCFG_WS	0x03800000	/* DRAM wait states */
    350 #define	TURBOSPARC_PCFG_RAH	0x0c000000	/* DRAM Row Address Hold */
    351 #define	TURBOSPARC_PCFG_AXC	0x30000000	/* AFX Clock */
    352 #define	TURBOSPARC_PCFG_SNP	0x40000000	/* DVMA Snoop enable */
    353 #define	TURBOSPARC_PCFG_IOCLK	0x80000000	/* I/O clock ratio */
    354 
    355 
    356 /* Implementation and Version fields are common to all modules */
    357 #define SRMMU_PCR_VER	0x0f000000	/* Version of MMU implementation */
    358 #define SRMMU_PCR_IMPL	0xf0000000	/* Implementation number of MMU */
    359 
    360 
    361 /* [4m] Bits in the Synchronous Fault Status Register */
    362 #define SFSR_EM		0x00020000	/* Error mode watchdog reset occurred */
    363 #define SFSR_CS		0x00010000	/* Control Space error */
    364 #define SFSR_SB		0x00008000	/* SS: Store Buffer Error */
    365 #define SFSR_PERR	0x00006000	/* Parity error code */
    366 #define SFSR_P		0x00004000	/* SS: Parity error */
    367 #define SFSR_UC		0x00001000	/* Uncorrectable error */
    368 #define SFSR_TO		0x00000800	/* S-Bus timeout */
    369 #define SFSR_BE		0x00000400	/* S-Bus bus error */
    370 #define SFSR_LVL	0x00000300	/* Pagetable level causing the fault */
    371 #define SFSR_AT		0x000000e0	/* Access type */
    372 #define SFSR_FT		0x0000001c	/* Fault type */
    373 #define SFSR_FAV	0x00000002	/* Fault Address is valid */
    374 #define SFSR_OW		0x00000001	/* Overwritten with new fault */
    375 
    376 #define	SFSR_BITS	"\177\020"		\
    377 	"b\21EM\0b\20CS\0b\17SB\0f\15\2PERR\0"	\
    378 	"b\14UC\0b\13TO\0b\12BE\0f\10\2LVL\0"	\
    379 	"f\05\3AT\0f\02\3FT\0b\01FAV\0b\00OW\0"
    380 
    381 /* [4m] Synchronous Fault Types */
    382 #define SFSR_FT_NONE		(0 << 2) 	/* no fault */
    383 #define SFSR_FT_INVADDR		(1 << 2)	/* invalid address fault */
    384 #define SFSR_FT_PROTERR		(2 << 2)	/* protection fault */
    385 #define SFSR_FT_PRIVERR		(3 << 2)	/* privilege violation */
    386 #define SFSR_FT_TRANSERR	(4 << 2)	/* translation fault */
    387 #define SFSR_FT_BUSERR		(5 << 2)	/* access bus error */
    388 #define SFSR_FT_INTERR		(6 << 2)	/* internal error */
    389 #define SFSR_FT_RESERVED	(7 << 2)	/* reserved */
    390 
    391 /* [4m] Synchronous Fault Access Types */
    392 #define SFSR_AT_LDUDATA		(0 << 5)     	/* Load user data */
    393 #define SFSR_AT_LDSDATA		(1 << 5)	/* Load supervisor data */
    394 #define SFSR_AT_LDUTEXT		(2 << 5)	/* Load user text */
    395 #define SFSR_AT_LDSTEXT		(3 << 5)	/* Load supervisor text */
    396 #define SFSR_AT_STUDATA		(4 << 5)	/* Store user data */
    397 #define SFSR_AT_STSDATA		(5 << 5) 	/* Store supervisor data */
    398 #define SFSR_AT_STUTEXT		(6 << 5)	/* Store user text */
    399 #define SFSR_AT_STSTEXT		(7 << 5)	/* Store supervisor text */
    400 #define SFSR_AT_SUPERVISOR	(1 << 5)	/* Set iff supervisor */
    401 #define SFSR_AT_TEXT		(2 << 5)	/* Set iff text */
    402 #define SFSR_AT_STORE		(4 << 5)	/* Set iff store */
    403 
    404 /* [4m] Synchronous Fault PT Levels */
    405 #define SFSR_LVL_0		(0 << 8)	/* Context table entry */
    406 #define SFSR_LVL_1		(1 << 8)	/* Region table entry */
    407 #define SFSR_LVL_2		(2 << 8)	/* Segment table entry */
    408 #define SFSR_LVL_3		(3 << 8)	/* Page table entry */
    409 
    410 /* [4m] Asynchronous Fault Status Register bits */
    411 #define AFSR_AFO	0x00000001	/* Async. fault occurred */
    412 #define AFSR_AFA	0x000000f0	/* Bits <35:32> of faulting phys addr */
    413 #define AFSR_AFA_RSHIFT	4		/* Shift to get AFA to bit 0 */
    414 #define AFSR_AFA_LSHIFT	28		/* Shift to get AFA to bit 32 */
    415 #define AFSR_BE		0x00000400	/* Bus error */
    416 #define AFSR_TO		0x00000800	/* Bus timeout */
    417 #define AFSR_UC		0x00001000	/* Uncorrectable error */
    418 #define AFSR_SE		0x00002000	/* System error */
    419 
    420 #define	AFSR_BITS	"\177\020"	\
    421 	"b\15SE\0b\14UC\0b\13TO\0b\12BE\0f\04\4AFA\0b\0AFO\0"
    422 
    423 /* [4m] TLB Replacement Control Register bits */
    424 #define TLBC_DISABLE	0x00000020	/* Disable replacement counter */
    425 #define TLBC_RCNTMASK	0x0000001f	/* Replacement counter (0-31) */
    426 
    427 /* [4m] SRMMU Reset Register bits */
    428 #define SRMMU_RST_SI	0x00000002	/* Software Internal reset */
    429 #define SRMMU_RST_WD	0x00000004	/* Watchdog reset */
    430 
    431 /*
    432  * The Ross Hypersparc has an Instruction Cache Control Register (ICCR)
    433  * It contains an enable bit for the on-chip instruction cache and a bit
    434  * that controls whether a FLUSH instruction causes an Unimplemented
    435  * Flush Trap or just flushes the appropriate instruction cache line.
    436  * The ICCR register is implemented as Ancillary State register number 31.
    437  */
    438 #define HYPERSPARC_ICCR_ICE	1	/* Instruction cache enable */
    439 #define HYPERSPARC_ICCR_FTD	2	/* Unimpl. flush trap disable */
    440 #define HYPERSPARC_ASRNUM_ICCR	31	/* ICCR == ASR#31 */
    441 
    442 
    443 /*
    444  * microSPARC-IIep has control space registers in PA[30:28] = 0x1
    445  */
    446 
    447 /* Asynchronous memory Fault Status/Address Registers */
    448 #define MSIIEP_AFSR	0x10001000
    449 #define MSIIEP_AFAR	0x10001004
    450 
    451 #define MSIIEP_AFSR_ERR		0x80000000 /* summary bit: LE || TO || BE */
    452 #define MSIIEP_AFSR_LE		0x40000000 /* late error */
    453 #define MSIIEP_AFSR_TO		0x20000000 /* time out */
    454 #define MSIIEP_AFSR_BE		0x10000000 /* bus error */
    455 #define MSIIEP_AFSR_S		0x01000000 /* supervisor */
    456 #define MSIIEP_AFSR_ME		0x00080000 /* multiple error */
    457 #define MSIIEP_AFSR_RD		0x00040000 /* read operation */
    458 #define MSIIEP_AFSR_FAV		0x00020000 /* fault address valid */
    459 
    460 #define MSIIEP_AFSR_BITS	"\177\20"			\
    461 		"b\37ERR\0" "b\36LE\0" "b\35TO\0" "b\34BE\0"	\
    462 		"b\30S\0" "b\23ME\0" "b\22RD\0" "b\21FAV\0"
    463 
    464 
    465 /* Memory Fault Status/Address Registers (parity faults) */
    466 #define MSIIEP_MFSR	0x10001050
    467 #define MSIIEP_MFAR	0x10001054
    468 
    469 #define MSIIEP_MFSR_ERR		0x80000000 /* summary bit */
    470 #define MSIIEP_MFSR_S		0x01000000 /* supervisor */
    471 #define MSIIEP_MFSR_CP		0x00800000 /* CPU transaction */
    472 #define MSIIEP_MFSR_ME		0x00080000 /* multiple error */
    473 #define MSIIEP_MFSR_ATO		0x00008000 /* PCI local bus timeout */
    474 #define MSIIEP_MFSR_PERR_1	0x00004000 /* parity error [1] */
    475 #define MSIIEP_MFSR_PERR_0	0x00002000 /* parity error [0] */
    476 #define MSIIEP_MFSR_BM		0x00001000 /* boot mode */
    477 #define MSIIEP_MFSR_C		0x00000800 /* cacheable */
    478 #define MSIIEP_MFSR_REQ		0x000000f0 /* request type */
    479 
    480 #define MSIIEP_MFSR_REQ_NOP		0x00
    481 #define MSIIEP_MFSR_REQ_RD64		0x10
    482 #define MSIIEP_MFSR_REQ_RD128		0x20
    483 #define MSIIEP_MFSR_REQ_RD256		0x40
    484 #define MSIIEP_MFSR_REQ_WR8		0x90
    485 #define MSIIEP_MFSR_REQ_WR16		0xa0
    486 #define MSIIEP_MFSR_REQ_WR32		0xb0
    487 #define MSIIEP_MFSR_REQ_WR64		0xc0
    488 
    489 #define MSIIEP_MFSR_BITS	"\177\20"				   \
    490 		"b\37ERR\0" "b\30S\0" "b\27CP\0" "b\23ME\0" "b\17ATO\0"	   \
    491 		"b\16PERR1\0" "b\15PERR0\0" "b\14BM\0" "b\13C\0"	   \
    492 		"f\4\4REQ\0" ":\0(NOP)\0" ":\1(RD64)\0" ":\2(RD128)\0"	   \
    493 		":\4(RD256)\0" ":\11(WR8)\0" ":\12(WR16)\0" ":\13(WR32)\0" \
    494 		":\14(WR64)\0"
    495